From: Bhupesh Sharma <[email protected]>
Convert Qualcomm QCE crypto devicetree binding to YAML.
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Tested-by: Jordan Crouse <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
Signed-off-by: Vladimir Zapolskiy <[email protected]>
---
.../devicetree/bindings/crypto/qcom-qce.txt | 25 -------
.../devicetree/bindings/crypto/qcom-qce.yaml | 67 +++++++++++++++++++
2 files changed, 67 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
deleted file mode 100644
index fdd53b184ba8..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Qualcomm crypto engine driver
-
-Required properties:
-
-- compatible : should be "qcom,crypto-v5.1"
-- reg : specifies base physical address and size of the registers map
-- clocks : phandle to clock-controller plus clock-specifier pair
-- clock-names : "iface" clocks register interface
- "bus" clocks data transfer interface
- "core" clocks rest of the crypto block
-- dmas : DMA specifiers for tx and rx dma channels. For more see
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names : DMA request names should be "rx" and "tx"
-
-Example:
- crypto@fd45a000 {
- compatible = "qcom,crypto-v5.1";
- reg = <0xfd45a000 0x6000>;
- clocks = <&gcc GCC_CE2_AHB_CLK>,
- <&gcc GCC_CE2_AXI_CLK>,
- <&gcc GCC_CE2_CLK>;
- clock-names = "iface", "bus", "core";
- dmas = <&cryptobam 2>, <&cryptobam 3>;
- dma-names = "rx", "tx";
- };
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 000000000000..8df47e8513b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+ - Bhupesh Sharma <[email protected]>
+
+description:
+ This document defines the binding for the QCE crypto
+ controller found on Qualcomm parts.
+
+properties:
+ compatible:
+ const: qcom,crypto-v5.1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: iface clocks register interface.
+ - description: bus clocks data transfer interface.
+ - description: core clocks rest of the crypto block.
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ dmas:
+ items:
+ - description: DMA specifiers for rx dma channel.
+ - description: DMA specifiers for tx dma channel.
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+ crypto-engine@fd45a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0xfd45a000 0x6000>;
+ clocks = <&gcc GCC_CE2_AHB_CLK>,
+ <&gcc GCC_CE2_AXI_CLK>,
+ <&gcc GCC_CE2_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ };
--
2.33.0