Hi Herbert,
Resubmitting the two other patches as requested.
Thanks,
Tadeusz
>From 06444d8a95458d807ae14699e557739281d0b026 Mon Sep 17 00:00:00 2001
From: Adrian Hoban <[email protected]>
Date: Fri, 10 Sep 2010 18:08:45 +0100
Subject: [PATCH 2/3] RFC4106 AES-GCM Driver Using Intel New Instructions
This patch adds an optimized RFC4106 AES-GCM implementation for 64-bit
kernels. It supports 128-bit AES key size. This leverages the crypto
AEAD interface type to facilitate a combined AES & GCM operation to
be implemented in assembly code. The assembly code leverages Intel(R)
AES New Instructions and the PCLMULQDQ instruction.
Signed-off-by: Adrian Hoban <[email protected]>
Signed-off-by: Tadeusz Struk <[email protected]>
Signed-off-by: Gabriele Paoloni <[email protected]>
Signed-off-by: Aidan O'Mahony <[email protected]>
Signed-off-by: Erdinc Ozturk <[email protected]>
Signed-off-by: James Guilford <[email protected]>
Signed-off-by: Wajdi Feghali <[email protected]>
---
arch/x86/crypto/aesni-intel_asm.S | 1112 +++++++++++++++++++++++++++++++++++-
arch/x86/crypto/aesni-intel_glue.c | 518 +++++++++++++++++-
2 files changed, 1627 insertions(+), 3 deletions(-)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index ff16756..3950769 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -8,6 +8,17 @@
* Author: Huang Ying <[email protected]>
* Vinodh Gopal <[email protected]>
* Kahraman Akdemir
+ *
+ * Added RFC4106 AES-GCM support for 128-bit keys under the AEAD
+ * interface for 64-bit kernels.
+ * Authors: Erdinc Ozturk ([email protected])
+ * Aidan O'Mahony ([email protected])
+ * Adrian Hoban <[email protected]>
+ * James Guilford ([email protected])
+ * Gabriele Paoloni <[email protected]>
+ * Tadeusz Struk ([email protected])
+ * Wajdi Feghali ([email protected])
+ * Copyright (c) 2010, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,9 +27,50 @@
*/
#include <linux/linkage.h>
-#include <asm/inst.h>
+
+
+.data
+POLY: .octa 0xC2000000000000000000000000000001
+TWOONE: .octa 0x00000001000000000000000000000001
+
+# order of these constants should not change.
+# more specifically, ALL_F should follow SHIFT_MASK, and ZERO should follow ALL_F
+
+SHUF_MASK: .octa 0x000102030405060708090A0B0C0D0E0F
+MASK1: .octa 0x0000000000000000ffffffffffffffff
+MASK2: .octa 0xffffffffffffffff0000000000000000
+SHIFT_MASK: .octa 0x0f0e0d0c0b0a09080706050403020100
+ALL_F: .octa 0xffffffffffffffffffffffffffffffff
+ZERO: .octa 0x00000000000000000000000000000000
+ONE: .octa 0x00000000000000000000000000000001
+F_MIN_MASK: .octa 0xf1f2f3f4f5f6f7f8f9fafbfcfdfeff0
+dec: .octa 0x1
+enc: .octa 0x2
+
.text
+#define STACK_OFFSET 8*3
+#define HashKey 16*0 // store HashKey <<1 mod poly here
+#define HashKey_2 16*1 // store HashKey^2 <<1 mod poly here
+#define HashKey_3 16*2 // store HashKey^3 <<1 mod poly here
+#define HashKey_4 16*3 // store HashKey^4 <<1 mod poly here
+#define HashKey_k 16*4 // store XOR of High 64 bits and Low 64 bits of HashKey <<1 mod poly here (for Karatsuba purposes)
+#define HashKey_2_k 16*5 // store XOR of High 64 bits and Low 64 bits of HashKey^2 <<1 mod poly here (for Karatsuba purposes)
+#define HashKey_3_k 16*6 // store XOR of High 64 bits and Low 64 bits of HashKey^3 <<1 mod poly here (for Karatsuba purposes)
+#define HashKey_4_k 16*7 // store XOR of High 64 bits and Low 64 bits of HashKey^4 <<1 mod poly here (for Karatsuba purposes)
+#define VARIABLE_OFFSET 16*8
+
+#define arg1 rdi
+#define arg2 rsi
+#define arg3 rdx
+#define arg4 rcx
+#define arg5 r8
+#define arg6 r9
+#define arg7 STACK_OFFSET+8(%r14)
+#define arg8 STACK_OFFSET+16(%r14)
+#define arg9 STACK_OFFSET+24(%r14)
+#define arg10 STACK_OFFSET+32(%r14)
+
#define STATE1 %xmm0
#define STATE2 %xmm4
@@ -47,6 +99,1064 @@
#define T2 %r11
#define TCTR_LOW T2
+
+/* GHASH_MUL MACRO to implement: Data*HashKey mod (128,127,126,121,0)
+*
+*
+* Input: A and B (128-bits each, bit-reflected)
+* Output: C = A*B*x mod poly, (i.e. >>1 )
+* To compute GH = GH*HashKey mod poly, give HK = HashKey<<1 mod poly as input
+* GH = GH * HK * x mod poly which is equivalent to GH*HashKey mod poly.
+*
+*/
+.macro GHASH_MUL GH HK TMP1 TMP2 TMP3 TMP4 TMP5
+ movdqa \GH, \TMP1
+ pshufd $78, \GH, \TMP2
+ pshufd $78, \HK, \TMP3
+ pxor \GH, \TMP2 # TMP2 = a1+a0
+ pxor \HK, \TMP3 # TMP3 = b1+b0
+ pclmulqdq $0x11, \HK, \TMP1 # TMP1 = a1*b1
+ pclmulqdq $0x00, \HK, \GH # GH = a0*b0
+ pclmulqdq $0x00, \TMP3, \TMP2 # TMP2 = (a0+a1)*(b1+b0)
+ pxor \GH, \TMP2
+ pxor \TMP1, \TMP2 # TMP2 = (a0*b0)+(a1*b0)
+ movdqa \TMP2, \TMP3
+ pslldq $8, \TMP3 # left shift TMP3 2 DWs
+ psrldq $8, \TMP2 # right shift TMP2 2 DWs
+ pxor \TMP3, \GH
+ pxor \TMP2, \TMP1 # TMP2:GH holds the result of GH*HK
+
+ # first phase of the reduction
+
+ movdqa \GH, \TMP2
+ movdqa \GH, \TMP3
+ movdqa \GH, \TMP4 # copy GH into TMP2,TMP3 and TMP4 in in order to perform independent shifts
+ pslld $31, \TMP2 # packed right shift <<31
+ pslld $30, \TMP3 # packed right shift <<30
+ pslld $25, \TMP4 # packed right shift <<25
+ pxor \TMP3, \TMP2 # xor the shifted versions
+ pxor \TMP4, \TMP2
+ movdqa \TMP2, \TMP5
+ psrldq $4, \TMP5 # right shift TMP5 1 DW
+ pslldq $12, \TMP2 # left shift TMP2 3 DWs
+ pxor \TMP2, \GH
+
+ # second phase of the reduction
+
+ movdqa \GH,\TMP2 # copy GH into TMP2,TMP3 and TMP4 in in order to perform independent shifts
+ movdqa \GH,\TMP3
+ movdqa \GH,\TMP4
+ psrld $1,\TMP2 # packed left shift >>1
+ psrld $2,\TMP3 # packed left shift >>2
+ psrld $7,\TMP4 # packed left shift >>7
+ pxor \TMP3,\TMP2 # xor the shifted versions
+ pxor \TMP4,\TMP2
+ pxor \TMP5, \TMP2
+ pxor \TMP2, \GH
+ pxor \TMP1, \GH # result is in TMP1
+.endm
+
+/*
+* if a = number of total plaintext bytes
+* b = floor(a/16)
+* num_initial_blocks = b mod 4
+* encrypt the initial num_initial_blocks blocks and apply ghash on the ciphertext
+* %r10, %r11, %r12, %rax, %xmm5, %xmm6, %xmm7, %xmm8, %xmm9 registers are clobbered
+* arg1, %arg2, %arg3, %r14 are used as a pointer only, not modified
+*/
+
+.macro INITIAL_BLOCKS num_initial_blocks TMP1 TMP2 TMP3 TMP4 TMP5 XMM0 XMM1 XMM2 XMM3 XMM4 XMMDst TMP6 TMP7 i i_seq operation
+
+ mov arg7, %r10 # %r10 = AAD
+ mov arg8, %r12 # %r12 = aadLen
+ mov %r12, %r11
+ pxor %xmm\i, %xmm\i
+_get_AAD_loop\num_initial_blocks\operation:
+ movd (%r10), \TMP1
+ pslldq $12, \TMP1
+ psrldq $4, %xmm\i
+ pxor \TMP1, %xmm\i
+ add $4, %r10
+ sub $4, %r12
+ jne _get_AAD_loop\num_initial_blocks\operation
+ cmp $16, %r11
+ je _get_AAD_loop2_done\num_initial_blocks\operation
+ mov $16, %r12
+_get_AAD_loop2\num_initial_blocks\operation:
+ psrldq $4, %xmm\i
+ sub $4, %r12
+ cmp %r11, %r12
+ jne _get_AAD_loop2\num_initial_blocks\operation
+_get_AAD_loop2_done\num_initial_blocks\operation:
+ pshufb SHUF_MASK(%rip), %xmm\i # byte-reflect the AAD data
+ xor %r11, %r11 # initialise the data pointer offset as zero
+
+
+ # start AES for num_initial_blocks blocks
+
+ mov %arg5, %rax # %rax = *Y0
+ movdqu (%rax), \XMM0 # XMM0 = Y0
+ pshufb SHUF_MASK(%rip), \XMM0
+.if \i_seq != 0
+.irpc index, \i_seq
+ paddd ONE(%rip), \XMM0 # INCR Y0
+ movdqa \XMM0, %xmm\index
+ pshufb SHUF_MASK(%rip), %xmm\index # perform a 16 byte swap
+.endr
+.irpc index, \i_seq
+ pxor 16*0(%arg1), %xmm\index
+.endr
+.irpc index, \i_seq
+ aesenc 16*1(%rdi), %xmm\index # Round 1
+.endr
+.irpc index, \i_seq
+ aesenc 16*2(%arg1), %xmm\index # Round 2
+.endr
+.irpc index, \i_seq
+ aesenc 16*3(%arg1), %xmm\index # Round 3
+.endr
+.irpc index, \i_seq
+ aesenc 16*4(%arg1), %xmm\index # Round 4
+.endr
+.irpc index, \i_seq
+ aesenc 16*5(%arg1), %xmm\index # Round 5
+.endr
+.irpc index, \i_seq
+ aesenc 16*6(%arg1), %xmm\index # Round 6
+.endr
+.irpc index, \i_seq
+ aesenc 16*7(%arg1), %xmm\index # Round 7
+.endr
+.irpc index, \i_seq
+ aesenc 16*8(%arg1), %xmm\index # Round 8
+.endr
+.irpc index, \i_seq
+ aesenc 16*9(%arg1), %xmm\index # Round 9
+.endr
+.irpc index, \i_seq
+ aesenclast 16*10(%arg1), %xmm\index # Round 10
+.endr
+.irpc index, \i_seq
+ movdqu (%arg3 , %r11, 1), \TMP1
+ pxor \TMP1, %xmm\index
+ movdqu %xmm\index, (%arg2 , %r11, 1) # write back plaintext/ciphertext for num_initial_blocks
+ add $16, %r11
+.if \operation == dec
+ movdqa \TMP1, %xmm\index
+.endif
+ pshufb SHUF_MASK(%rip), %xmm\index # prepare plaintext/ciphertext for GHASH computation
+.endr
+.endif
+ GHASH_MUL %xmm\i, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+
+ # apply GHASH on num_initial_blocks blocks
+
+.if \i == 5
+ pxor %xmm5, %xmm6
+ GHASH_MUL %xmm6, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+ pxor %xmm6, %xmm7
+ GHASH_MUL %xmm7, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+ pxor %xmm7, %xmm8
+ GHASH_MUL %xmm8, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+.elseif \i == 6
+ pxor %xmm6, %xmm7
+ GHASH_MUL %xmm7, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+ pxor %xmm7, %xmm8
+ GHASH_MUL %xmm8, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+.elseif \i == 7
+ pxor %xmm7, %xmm8
+ GHASH_MUL %xmm8, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
+.endif
+ cmp $64, %r13
+ jl _initial_blocks_done\num_initial_blocks\operation # no need for precomputed values
+/*
+*
+* Precomputations for HashKey parallel with encryption of first 4 blocks.
+* Haskey_i_k holds XORed values of the low and high parts of the Haskey_i
+*/
+ paddd ONE(%rip), \XMM0 # INCR Y0
+ movdqa \XMM0, \XMM1
+ pshufb SHUF_MASK(%rip), \XMM1 # perform a 16 byte swap
+ paddd ONE(%rip), \XMM0 # INCR Y0
+ movdqa \XMM0, \XMM2
+ pshufb SHUF_MASK(%rip), \XMM2 # perform a 16 byte swap
+ paddd ONE(%rip), \XMM0 # INCR Y0
+ movdqa \XMM0, \XMM3
+ pshufb SHUF_MASK(%rip), \XMM3 # perform a 16 byte swap
+ paddd ONE(%rip), \XMM0 # INCR Y0
+ movdqa \XMM0, \XMM4
+ pshufb SHUF_MASK(%rip), \XMM4 # perform a 16 byte swap
+ pxor 16*0(%arg1), \XMM1
+ pxor 16*0(%arg1), \XMM2
+ pxor 16*0(%arg1), \XMM3
+ pxor 16*0(%arg1), \XMM4
+ movdqa \TMP3, \TMP5
+ pshufd $78, \TMP3, \TMP1
+ pxor \TMP3, \TMP1
+ movdqa \TMP1, HashKey_k(%rsp)
+ GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7 # TMP5 = HashKey^2<<1 (mod poly)
+ movdqa \TMP5, HashKey_2(%rsp) # HashKey_2 = HashKey^2<<1 (mod poly)
+ pshufd $78, \TMP5, \TMP1
+ pxor \TMP5, \TMP1
+ movdqa \TMP1, HashKey_2_k(%rsp)
+.irpc index, 1234 # do 4 rounds
+ aesenc 16*\index(%arg1), \XMM1
+ aesenc 16*\index(%arg1), \XMM2
+ aesenc 16*\index(%arg1), \XMM3
+ aesenc 16*\index(%arg1), \XMM4
+.endr
+ GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7 # TMP5 = HashKey^3<<1 (mod poly)
+ movdqa \TMP5, HashKey_3(%rsp)
+ pshufd $78, \TMP5, \TMP1
+ pxor \TMP5, \TMP1
+ movdqa \TMP1, HashKey_3_k(%rsp)
+.irpc index, 56789 # do next 5 rounds
+ aesenc 16*\index(%arg1), \XMM1
+ aesenc 16*\index(%arg1), \XMM2
+ aesenc 16*\index(%arg1), \XMM3
+ aesenc 16*\index(%arg1), \XMM4
+.endr
+ GHASH_MUL \TMP5, \TMP3, \TMP1, \TMP2, \TMP4, \TMP6, \TMP7 # TMP5 = HashKey^3<<1 (mod poly)
+ movdqa \TMP5, HashKey_4(%rsp)
+ pshufd $78, \TMP5, \TMP1
+ pxor \TMP5, \TMP1
+ movdqa \TMP1, HashKey_4_k(%rsp)
+ aesenclast 160(%arg1), \XMM1
+ aesenclast 160(%arg1), \XMM2
+ aesenclast 160(%arg1), \XMM3
+ aesenclast 160(%arg1), \XMM4
+ movdqu 16*0(%arg3 , %r11 , 1), \TMP1
+ pxor \TMP1, \XMM1
+.if \operation == dec
+ movdqu \XMM1, 16*0(%arg2 , %r11 , 1)
+ movdqa \TMP1, \XMM1
+.endif
+ movdqu 16*1(%arg3 , %r11 , 1), \TMP1
+ pxor \TMP1, \XMM2
+.if \operation == dec
+ movdqu \XMM2, 16*1(%arg2 , %r11 , 1)
+ movdqa \TMP1, \XMM2
+.endif
+ movdqu 16*2(%arg3 , %r11 , 1), \TMP1
+ pxor \TMP1, \XMM3
+.if \operation == dec
+ movdqu \XMM3, 16*2(%arg2 , %r11 , 1)
+ movdqa \TMP1, \XMM3
+.endif
+ movdqu 16*3(%arg3 , %r11 , 1), \TMP1
+ pxor \TMP1, \XMM4
+.if \operation == dec
+ movdqu \XMM4, 16*3(%arg2 , %r11 , 1)
+ movdqa \TMP1, \XMM4
+.else
+ movdqu \XMM1, 16*0(%arg2 , %r11 , 1)
+ movdqu \XMM2, 16*1(%arg2 , %r11 , 1)
+ movdqu \XMM3, 16*2(%arg2 , %r11 , 1)
+ movdqu \XMM4, 16*3(%arg2 , %r11 , 1)
+.endif
+ add $64, %r11
+ pshufb SHUF_MASK(%rip), \XMM1 # perform a 16 byte swap
+ pxor \XMMDst, \XMM1 # combine GHASHed value with the corresponding ciphertext
+ pshufb SHUF_MASK(%rip), \XMM2 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM3 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM4 # perform a 16 byte swap
+_initial_blocks_done\num_initial_blocks\operation:
+.endm
+
+/*
+* encrypt 4 blocks at a time
+* ghash the 4 previously encrypted ciphertext blocks
+* arg1, %arg2, %arg3 are used as pointers only, not modified
+* %r11 is the data offset value
+*/
+.macro GHASH_4_ENCRYPT_4_PARALLEL TMP1 TMP2 TMP3 TMP4 TMP5 TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
+
+ movdqa \XMM1, \XMM5
+ movdqa \XMM2, \XMM6
+ movdqa \XMM3, \XMM7
+ movdqa \XMM4, \XMM8
+
+ # multiply TMP5 * HashKey using karatsuba
+
+ movdqa \XMM5, \TMP4
+ pshufd $78, \XMM5, \TMP6
+ pxor \XMM5, \TMP6
+ paddd ONE(%rip), \XMM0 # INCR CNT
+ movdqa HashKey_4(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP4 # TMP4 = a1*b1
+ movdqa \XMM0, \XMM1
+ paddd ONE(%rip), \XMM0 # INCR CNT
+ movdqa \XMM0, \XMM2
+ paddd ONE(%rip), \XMM0 # INCR CNT
+ movdqa \XMM0, \XMM3
+ paddd ONE(%rip), \XMM0 # INCR CNT
+ movdqa \XMM0, \XMM4
+ pshufb SHUF_MASK(%rip), \XMM1 # perform a 16 byte swap
+ pclmulqdq $0x00, \TMP5, \XMM5 # XMM5 = a0*b0
+ pshufb SHUF_MASK(%rip), \XMM2 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM3 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM4 # perform a 16 byte swap
+ pxor (%arg1), \XMM1
+ pxor (%arg1), \XMM2
+ pxor (%arg1), \XMM3
+ pxor (%arg1), \XMM4
+ movdqa HashKey_4_k(%rsp), \TMP5
+ pclmulqdq $0x00, \TMP5, \TMP6 # TMP6 = (a1+a0)*(b1+b0)
+ aesenc 16(%arg1), \XMM1 # Round 1
+ aesenc 16(%arg1), \XMM2
+ aesenc 16(%arg1), \XMM3
+ aesenc 16(%arg1), \XMM4
+ aesenc 32(%arg1), \XMM1 # Round 2
+ aesenc 32(%arg1), \XMM2
+ aesenc 32(%arg1), \XMM3
+ aesenc 32(%arg1), \XMM4
+ movdqa \XMM6, \TMP1
+ pshufd $78, \XMM6, \TMP2
+ pxor \XMM6, \TMP2
+ movdqa HashKey_3(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1 * b1
+ aesenc 48(%arg1), \XMM1 # Round 3
+ aesenc 48(%arg1), \XMM2
+ aesenc 48(%arg1), \XMM3
+ aesenc 48(%arg1), \XMM4
+ pclmulqdq $0x00, \TMP5, \XMM6 # XMM6 = a0*b0
+ aesenc 64(%arg1), \XMM1 # Round 4
+ aesenc 64(%arg1), \XMM2
+ aesenc 64(%arg1), \XMM3
+ aesenc 64(%arg1), \XMM4
+ movdqa HashKey_3_k(%rsp), \TMP5
+ pclmulqdq $0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ aesenc 80(%arg1), \XMM1 # Round 5
+ aesenc 80(%arg1), \XMM2
+ aesenc 80(%arg1), \XMM3
+ aesenc 80(%arg1), \XMM4
+ pxor \TMP1, \TMP4 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
+ pxor \XMM6, \XMM5
+ pxor \TMP2, \TMP6
+ movdqa \XMM7, \TMP1
+ pshufd $78, \XMM7, \TMP2
+ pxor \XMM7, \TMP2
+ movdqa HashKey_2(%rsp ), \TMP5
+
+ # Multiply TMP5 * HashKey using karatsuba
+
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1*b1
+ aesenc 96(%arg1), \XMM1 # Round 6
+ aesenc 96(%arg1), \XMM2
+ aesenc 96(%arg1), \XMM3
+ aesenc 96(%arg1), \XMM4
+ pclmulqdq $0x00, \TMP5, \XMM7 # XMM7 = a0*b0
+ aesenc 112(%arg1), \XMM1 # Round 7
+ aesenc 112(%arg1), \XMM2
+ aesenc 112(%arg1), \XMM3
+ aesenc 112(%arg1), \XMM4
+ movdqa HashKey_2_k(%rsp), \TMP5
+ pclmulqdq $0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ aesenc 128(%arg1), \XMM1 # Round 8
+ aesenc 128(%arg1), \XMM2
+ aesenc 128(%arg1), \XMM3
+ aesenc 128(%arg1), \XMM4
+ pxor \TMP1, \TMP4 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
+ pxor \XMM7, \XMM5
+ pxor \TMP2, \TMP6
+
+ # Multiply XMM8 * HashKey
+ # XMM8 and TMP5 hold the values for the two operands
+
+ movdqa \XMM8, \TMP1
+ pshufd $78, \XMM8, \TMP2
+ pxor \XMM8, \TMP2
+ movdqa HashKey(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1*b1
+ aesenc 144(%arg1), \XMM1 # Round 9
+ aesenc 144(%arg1), \XMM2
+ aesenc 144(%arg1), \XMM3
+ aesenc 144(%arg1), \XMM4
+ pclmulqdq $0x00, \TMP5, \XMM8 # XMM8 = a0*b0
+ aesenclast 160(%arg1), \XMM1 # Round 10
+ aesenclast 160(%arg1), \XMM2
+ aesenclast 160(%arg1), \XMM3
+ aesenclast 160(%arg1), \XMM4
+ movdqa HashKey_k(%rsp), \TMP5
+ pclmulqdq $0x00, \TMP5, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ movdqu (%arg3,%r11,1), \TMP3
+ pxor \TMP3, \XMM1 # Ciphertext/Plaintext XOR EK
+.if \operation == dec
+ movdqu \XMM1, (%arg2,%r11,1) # Write to plaintext buffer
+ movdqa \TMP3, \XMM1
+.endif
+ movdqu 16(%arg3,%r11,1), \TMP3
+ pxor \TMP3, \XMM2 # Ciphertext/Plaintext XOR EK
+.if \operation == dec
+ movdqu \XMM2, 16(%arg2,%r11,1) # Write to plaintext buffer
+ movdqa \TMP3, \XMM2
+.endif
+ movdqu 32(%arg3,%r11,1), \TMP3
+ pxor \TMP3, \XMM3 # Ciphertext/Plaintext XOR EK
+.if \operation == dec
+ movdqu \XMM3, 32(%arg2,%r11,1) # Write to plaintext buffer
+ movdqa \TMP3, \XMM3
+.endif
+ movdqu 48(%arg3,%r11,1), \TMP3
+ pxor \TMP3, \XMM4 # Ciphertext/Plaintext XOR EK
+.if \operation == dec
+ movdqu \XMM4, 48(%arg2,%r11,1) # Write to plaintext buffer
+ movdqa \TMP3, \XMM4
+.else
+ movdqu \XMM1, (%arg2,%r11,1) # Write to the ciphertext buffer
+ movdqu \XMM2, 16(%arg2,%r11,1) # Write to the ciphertext buffer
+ movdqu \XMM3, 32(%arg2,%r11,1) # Write to the ciphertext buffer
+ movdqu \XMM4, 48(%arg2,%r11,1) # Write to the ciphertext buffer
+.endif
+ pshufb SHUF_MASK(%rip), \XMM1 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM2 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM3 # perform a 16 byte swap
+ pshufb SHUF_MASK(%rip), \XMM4 # perform a 16 byte sway
+
+ pxor \TMP4, \TMP1
+ pxor \XMM8, \XMM5
+ pxor \TMP6, \TMP2
+ pxor \TMP1, \TMP2
+ pxor \XMM5, \TMP2
+ movdqa \TMP2, \TMP3
+ pslldq $8, \TMP3 # left shift TMP3 2 DWs
+ psrldq $8, \TMP2 # right shift TMP2 2 DWs
+ pxor \TMP3, \XMM5
+ pxor \TMP2, \TMP1 # accumulate the results in TMP1:XMM5
+
+ # first phase of reduction
+
+ movdqa \XMM5, \TMP2
+ movdqa \XMM5, \TMP3
+ movdqa \XMM5, \TMP4 # move XMM5 into TMP2, TMP3, TMP4 in order to perform shifts independently
+ pslld $31, \TMP2 # packed right shift << 31
+ pslld $30, \TMP3 # packed right shift << 30
+ pslld $25, \TMP4 # packed right shift << 25
+ pxor \TMP3, \TMP2 # xor the shifted versions
+ pxor \TMP4, \TMP2
+ movdqa \TMP2, \TMP5
+ psrldq $4, \TMP5 # right shift T5 1 DW
+ pslldq $12, \TMP2 # left shift T2 3 DWs
+ pxor \TMP2, \XMM5
+
+ # second phase of reduction
+
+ movdqa \XMM5,\TMP2 # make 3 copies of XMM5 into TMP2, TMP3, TMP4
+ movdqa \XMM5,\TMP3
+ movdqa \XMM5,\TMP4
+ psrld $1, \TMP2 # packed left shift >>1
+ psrld $2, \TMP3 # packed left shift >>2
+ psrld $7, \TMP4 # packed left shift >>7
+ pxor \TMP3,\TMP2 # xor the shifted versions
+ pxor \TMP4,\TMP2
+ pxor \TMP5, \TMP2
+ pxor \TMP2, \XMM5
+ pxor \TMP1, \XMM5 # result is in TMP1
+
+ pxor \XMM5, \XMM1
+.endm
+
+/* GHASH the last 4 ciphertext blocks. */
+.macro GHASH_LAST_4 TMP1 TMP2 TMP3 TMP4 TMP5 TMP6 TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
+
+ # Multiply TMP6 * HashKey (using Karatsuba)
+
+ movdqa \XMM1, \TMP6
+ pshufd $78, \XMM1, \TMP2
+ pxor \XMM1, \TMP2
+ movdqa HashKey_4(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP6 # TMP6 = a1*b1
+ pclmulqdq $0x00, \TMP5, \XMM1 # XMM1 = a0*b0
+ movdqa HashKey_4_k(%rsp), \TMP4
+ pclmulqdq $0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ movdqa \XMM1, \XMMDst
+ movdqa \TMP2, \XMM1 # result in TMP6, XMMDst, XMM1
+
+ # Multiply TMP1 * HashKey (using Karatsuba)
+
+ movdqa \XMM2, \TMP1
+ pshufd $78, \XMM2, \TMP2
+ pxor \XMM2, \TMP2
+ movdqa HashKey_3(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1*b1
+ pclmulqdq $0x00, \TMP5, \XMM2 # XMM2 = a0*b0
+ movdqa HashKey_3_k(%rsp), \TMP4
+ pclmulqdq $0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ pxor \TMP1, \TMP6
+ pxor \XMM2, \XMMDst
+ pxor \TMP2, \XMM1 # results accumulated in TMP6, XMMDst, XMM1
+
+ # Multiply TMP1 * HashKey (using Karatsuba)
+
+ movdqa \XMM3, \TMP1
+ pshufd $78, \XMM3, \TMP2
+ pxor \XMM3, \TMP2
+ movdqa HashKey_2(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1*b1
+ pclmulqdq $0x00, \TMP5, \XMM3 # XMM3 = a0*b0
+ movdqa HashKey_2_k(%rsp), \TMP4
+ pclmulqdq $0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ pxor \TMP1, \TMP6
+ pxor \XMM3, \XMMDst
+ pxor \TMP2, \XMM1 # results accumulated in TMP6, XMMDst, XMM1
+
+ # Multiply TMP1 * HashKey (using Karatsuba)
+
+ movdqa \XMM4, \TMP1
+ pshufd $78, \XMM4, \TMP2
+ pxor \XMM4, \TMP2
+ movdqa HashKey(%rsp), \TMP5
+ pclmulqdq $0x11, \TMP5, \TMP1 # TMP1 = a1*b1
+ pclmulqdq $0x00, \TMP5, \XMM4 # XMM4 = a0*b0
+ movdqa HashKey_k(%rsp), \TMP4
+ pclmulqdq $0x00, \TMP4, \TMP2 # TMP2 = (a1+a0)*(b1+b0)
+ pxor \TMP1, \TMP6
+ pxor \XMM4, \XMMDst
+ pxor \XMM1, \TMP2
+ pxor \TMP6, \TMP2
+ pxor \XMMDst, \TMP2 # middle section of the temp results combined as in karatsuba algorithm
+ movdqa \TMP2, \TMP4
+ pslldq $8, \TMP4 # left shift TMP4 2 DWs
+ psrldq $8, \TMP2 # right shift TMP2 2 DWs
+ pxor \TMP4, \XMMDst
+ pxor \TMP2, \TMP6 # TMP6:XMMDst holds the result of the accumulated carry-less multiplications
+
+ # first phase of the reduction
+
+ movdqa \XMMDst, \TMP2
+ movdqa \XMMDst, \TMP3
+ movdqa \XMMDst, \TMP4 # move XMMDst into TMP2, TMP3, TMP4 in order to perform 3 shifts independently
+ pslld $31, \TMP2 # packed right shifting << 31
+ pslld $30, \TMP3 # packed right shifting << 30
+ pslld $25, \TMP4 # packed right shifting << 25
+ pxor \TMP3, \TMP2 # xor the shifted versions
+ pxor \TMP4, \TMP2
+ movdqa \TMP2, \TMP7
+ psrldq $4, \TMP7 # right shift TMP7 1 DW
+ pslldq $12, \TMP2 # left shift TMP2 3 DWs
+ pxor \TMP2, \XMMDst
+
+ # second phase of the reduction
+
+ movdqa \XMMDst, \TMP2 # make 3 copies of XMMDst for doing 3 shift operations
+ movdqa \XMMDst, \TMP3
+ movdqa \XMMDst, \TMP4
+ psrld $1, \TMP2 # packed left shift >> 1
+ psrld $2, \TMP3 # packed left shift >> 2
+ psrld $7, \TMP4 # packed left shift >> 7
+ pxor \TMP3, \TMP2 # xor the shifted versions
+ pxor \TMP4, \TMP2
+ pxor \TMP7, \TMP2
+ pxor \TMP2, \XMMDst
+ pxor \TMP6, \XMMDst # reduced result is in XMMDst
+.endm
+
+/* Encryption of a single block done*/
+.macro ENCRYPT_SINGLE_BLOCK XMM0
+
+ pxor (%arg1), \XMM0
+ aesenc 16(%arg1), \XMM0
+ aesenc 32(%arg1), \XMM0
+ aesenc 48(%arg1), \XMM0
+ aesenc 64(%arg1), \XMM0
+ aesenc 80(%arg1), \XMM0
+ aesenc 96(%arg1), \XMM0
+ aesenc 112(%arg1), \XMM0
+ aesenc 128(%arg1), \XMM0
+ aesenc 144(%arg1), \XMM0
+ aesenclast 160(%arg1), \XMM0
+.endm
+
+
+/**********************************************************************************************
+*void aesni_gcm_dec(void *aes_ctx, // AES Key schedule. Starts on a 16 byte boundary.
+* u8 *out, // Plaintext output. Encrypt in-place is allowed.
+* const u8 *in, // Ciphertext input
+* u64 plaintext_len, // Length of data in bytes for decryption.
+* u8 *iv, // Pre-counter block j0: 4 byte salt (from Security Association)
+* // concatenated with 8 byte Initialisation Vector (from IPSec ESP Payload)
+* // concatenated with 0x00000001. 16-byte aligned pointer.
+* u8 *hash_subkey, // H, the Hash sub key input. Data starts on a 16-byte boundary.
+* const u8 *aad, // Additional Authentication Data (AAD)
+* u64 aad_len, // Length of AAD in bytes. With RFC4106 this is going to be 8 or 12 bytes
+* u8 *auth_tag, // Authenticated Tag output. The driver will compare this to the
+* // given authentication tag and only return the plaintext if they match.
+* u64 auth_tag_len); // Authenticated Tag Length in bytes. Valid values are 16 (most likely), 12 or 8.
+*
+*
+*
+* Assumptions:
+*
+* keys:
+* keys are pre-expanded and aligned to 16 bytes. we are using the first set of 11 keys in the data structure void *aes_ctx
+*
+*
+* iv:
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | Salt (From the SA) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | Initialization Vector |
+* | (This is the sequence number from IPSec header) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x1 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+*
+*
+* AAD:
+* AAD padded to 128 bits with 0
+* for example, assume AAD is a u32 vector
+*
+* if AAD is 8 bytes:
+* AAD[3] = {A0, A1};
+* padded AAD in xmm register = {A1 A0 0 0}
+*
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | SPI (A1) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 32-bit Sequence Number (A0) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x0 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+* AAD Format with 32-bit Sequence Number
+*
+* if AAD is 12 bytes:
+* AAD[3] = {A0, A1, A2};
+* padded AAD in xmm register = {A2 A1 A0 0}
+*
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | SPI (A2) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 64-bit Extended Sequence Number {A1,A0} |
+* | |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x0 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+* AAD Format with 64-bit Extended Sequence Number
+*
+*
+* aadLen:
+* from the definition of the spec, aadLen can only be 8 or 12 bytes. The code supports 16 too but for other sizes, the code will fail.
+*
+* TLen:
+* from the definition of the spec, TLen can only be 8, 12 or 16 bytes. For other sizes, the code will fail.
+*
+* poly = x^128 + x^127 + x^126 + x^121 + 1
+*
+*******************************************************************************************/
+
+ENTRY(aesni_gcm_dec)
+ push %r12
+ push %r13
+ push %r14
+ mov %rsp, %r14
+/*
+* states of %xmm registers %xmm6:%xmm15 not saved
+* all %xmm registers are clobbered
+*/
+ sub $VARIABLE_OFFSET, %rsp
+ and $~63, %rsp # align rsp to 64 bytes
+ mov %arg6, %r12
+ movdqu (%r12), %xmm13 # %xmm13 = HashKey
+ pshufb SHUF_MASK(%rip), %xmm13
+
+ # Precompute HashKey<<1 (mod poly) from the hash key (this is required for GHASH)
+
+ movdqa %xmm13, %xmm2
+ psllq $1, %xmm13
+ psrlq $63, %xmm2
+ movdqa %xmm2, %xmm1
+ pslldq $8, %xmm2
+ psrldq $8, %xmm1
+ por %xmm2, %xmm13
+
+ # Reduction
+
+ pshufd $0x24, %xmm1, %xmm2
+ pcmpeqd TWOONE(%rip), %xmm2
+ pand POLY(%rip), %xmm2
+ pxor %xmm2, %xmm13 # %xmm13 holds the HashKey<<1 (mod poly)
+
+
+ # Decrypt first few blocks
+
+ movdqa %xmm13, HashKey(%rsp) # store HashKey<<1 (mod poly)
+ mov %arg4, %r13 # save the number of bytes of plaintext/ciphertext
+ and $-16, %r13 # %r13 = %r13 - (%r13 mod 16)
+ mov %r13, %r12
+ and $(3<<4), %r12
+ jz _initial_num_blocks_is_0_decrypt
+ cmp $(2<<4), %r12
+ jb _initial_num_blocks_is_1_decrypt
+ je _initial_num_blocks_is_2_decrypt
+_initial_num_blocks_is_3_decrypt:
+ INITIAL_BLOCKS 3, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 5, 678, dec
+ sub $48, %r13
+ jmp _initial_blocks_decrypted
+_initial_num_blocks_is_2_decrypt:
+ INITIAL_BLOCKS 2, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 6, 78, dec
+ sub $32, %r13
+ jmp _initial_blocks_decrypted
+_initial_num_blocks_is_1_decrypt:
+ INITIAL_BLOCKS 1, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 7, 8, dec
+ sub $16, %r13
+ jmp _initial_blocks_decrypted
+_initial_num_blocks_is_0_decrypt:
+ INITIAL_BLOCKS 0, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 8, 0, dec
+_initial_blocks_decrypted:
+ cmp $0, %r13
+ je _zero_cipher_left_decrypt
+ sub $64, %r13
+ je _four_cipher_left_decrypt
+_decrypt_by_4:
+ GHASH_4_ENCRYPT_4_PARALLEL %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, dec
+ add $64, %r11
+ sub $64, %r13
+ jne _decrypt_by_4
+_four_cipher_left_decrypt:
+ GHASH_LAST_4 %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8
+_zero_cipher_left_decrypt:
+ mov %arg4, %r13
+ and $15, %r13 # %r13 = arg4 (mod 16)
+ je _multiple_of_16_bytes_decrypt
+
+ # Handle the last <16 byte block seperately
+
+ paddd ONE(%rip), %xmm0 # increment CNT to get Yn
+ pshufb SHUF_MASK(%rip), %xmm0
+ ENCRYPT_SINGLE_BLOCK %xmm0 # E(K, Yn)
+ sub $16, %r11
+ add %r13, %r11
+ movdqu (%arg3,%r11,1), %xmm1 # recieve the last <16 byte block
+ lea SHIFT_MASK+16(%rip), %r12
+ sub %r13, %r12 # adjust the shuffle mask pointer to be able to shift 16-%r13 bytes
+ # (%r13 is the number of bytes in plaintext mod 16)
+ movdqu (%r12), %xmm2 # get the appropriate shuffle mask
+ pshufb %xmm2, %xmm1 # right shift 16-%r13 butes
+ movdqa %xmm1, %xmm2
+ pxor %xmm1, %xmm0 # Ciphertext XOR E(K, Yn)
+ movdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out top 16-%r13 bytes of %xmm0
+ pand %xmm1, %xmm0 # mask out top 16-%r13 bytes of %xmm0
+ pand %xmm1, %xmm2
+ pshufb SHUF_MASK(%rip),%xmm2
+ pxor %xmm2, %xmm8
+ GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6 # GHASH computation for the last <16 byte block
+ sub %r13, %r11
+ add $16, %r11
+
+ # output %r13 bytes
+
+ movq %xmm0, %rax
+ cmp $8, %r13
+ jle _less_than_8_bytes_left_decrypt
+ mov %rax, (%arg2 , %r11, 1)
+ add $8, %r11
+ psrldq $8, %xmm0
+ movq %xmm0, %rax
+ sub $8, %r13
+_less_than_8_bytes_left_decrypt:
+ mov %al, (%arg2, %r11, 1)
+ add $1, %r11
+ shr $8, %rax
+ sub $1, %r13
+ jne _less_than_8_bytes_left_decrypt
+_multiple_of_16_bytes_decrypt:
+ mov arg8, %r12 # %r13 = aadLen (number of bytes)
+ shl $3, %r12 # convert into number of bits
+ movd %r12d, %xmm15 # len(A) in %xmm15
+ shl $3, %arg4 # len(C) in bits (*128)
+ movq %arg4, %xmm1
+ pslldq $8, %xmm15 # %xmm15 = len(A)||0x0000000000000000
+ pxor %xmm1, %xmm15 # %xmm15 = len(A)||len(C)
+ pxor %xmm15, %xmm8
+ GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6 # final GHASH computation
+ pshufb SHUF_MASK(%rip), %xmm8
+ mov %arg5, %rax # %rax = *Y0
+ movdqu (%rax), %xmm0 # %xmm0 = Y0
+ ENCRYPT_SINGLE_BLOCK %xmm0 # E(K, Y0)
+ pxor %xmm8, %xmm0
+_return_T_decrypt:
+ mov arg9, %r10 # %r10 = authTag
+ mov arg10, %r11 # %r11 = auth_tag_len
+ cmp $16, %r11
+ je _T_16_decrypt
+ cmp $12, %r11
+ je _T_12_decrypt
+_T_8_decrypt:
+ movq %xmm0, %rax
+ mov %rax, (%r10)
+ jmp _return_T_done_decrypt
+_T_12_decrypt:
+ movq %xmm0, %rax
+ mov %rax, (%r10)
+ psrldq $8, %xmm0
+ movd %xmm0, %eax
+ mov %eax, 8(%r10)
+ jmp _return_T_done_decrypt
+_T_16_decrypt:
+ movdqu %xmm0, (%r10)
+_return_T_done_decrypt:
+ mov %r14, %rsp
+ pop %r14
+ pop %r13
+ pop %r12
+ ret
+
+
+/***************************************************************************************************
+* void aesni_gcm_enc(void *aes_ctx, // AES Key schedule. Starts on a 16 byte boundary.
+* u8 *out, // Ciphertext output. Encrypt in-place is allowed.
+* const u8 *in, // Plaintext input
+* u64 plaintext_len, // Length of data in bytes for encryption.
+* u8 *iv, // Pre-counter block j0: 4 byte salt (from Security Association)
+* // concatenated with 8 byte Initialisation Vector (from IPSec ESP Payload)
+* // concatenated with 0x00000001. 16-byte aligned pointer.
+* u8 *hash_subkey, // H, the Hash sub key input. Data starts on a 16-byte boundary.
+* const u8 *aad, // Additional Authentication Data (AAD)
+* u64 aad_len, // Length of AAD in bytes. With RFC4106 this is going to be 8 or 12 bytes
+* u8 *auth_tag, // Authenticated Tag output.
+* u64 auth_tag_len); // Authenticated Tag Length in bytes. Valid values are 16 (most likely), 12 or 8.
+*
+*
+*
+* Assumptions:
+*
+* keys:
+* keys are pre-expanded and aligned to 16 bytes. we are using the first set of 11 keys in the data structure void *aes_ctx
+*
+*
+* iv:
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | Salt (From the SA) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | Initialization Vector |
+* | (This is the sequence number from IPSec header) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x1 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+*
+*
+* AAD:
+* AAD padded to 128 bits with 0
+* for example, assume AAD is a u32 vector
+*
+* if AAD is 8 bytes:
+* AAD[3] = {A0, A1};
+* padded AAD in xmm register = {A1 A0 0 0}
+*
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | SPI (A1) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 32-bit Sequence Number (A0) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x0 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+* AAD Format with 32-bit Sequence Number
+*
+* if AAD is 12 bytes:
+* AAD[3] = {A0, A1, A2};
+* padded AAD in xmm register = {A2 A1 A0 0}
+*
+* 0 1 2 3
+* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | SPI (A2) |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 64-bit Extended Sequence Number {A1,A0} |
+* | |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+* | 0x0 |
+* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*
+* AAD Format with 64-bit Extended Sequence Number
+*
+*
+* aadLen:
+* from the definition of the spec, aadLen can only be 8 or 12 bytes. The code supports 16 too but for other sizes, the code will fail.
+*
+* TLen:
+* from the definition of the spec, TLen can only be 8, 12 or 16 bytes. For other sizes, the code will fail.
+*
+* poly = x^128 + x^127 + x^126 + x^121 + 1
+**************************************************************************************************************************/
+ENTRY(aesni_gcm_enc)
+ push %r12
+ push %r13
+ push %r14
+ mov %rsp, %r14
+#
+# states of %xmm registers %xmm6:%xmm15 not saved
+# all %xmm registers are clobbered
+#
+ sub $VARIABLE_OFFSET, %rsp
+ and $~63, %rsp
+ mov %arg6, %r12
+ movdqu (%r12), %xmm13
+ pshufb SHUF_MASK(%rip), %xmm13
+
+ # precompute HashKey<<1 mod poly from the HashKey (required for GHASH)
+
+ movdqa %xmm13, %xmm2
+ psllq $1, %xmm13
+ psrlq $63, %xmm2
+ movdqa %xmm2, %xmm1
+ pslldq $8, %xmm2
+ psrldq $8, %xmm1
+ por %xmm2, %xmm13
+
+ # reduce HashKey<<1
+
+ pshufd $0x24, %xmm1, %xmm2
+ pcmpeqd TWOONE(%rip), %xmm2
+ pand POLY(%rip), %xmm2
+ pxor %xmm2, %xmm13
+ movdqa %xmm13, HashKey(%rsp)
+ mov %arg4, %r13 # %xmm13 holds HashKey<<1 (mod poly)
+ and $-16, %r13
+ mov %r13, %r12
+
+ # Encrypt first few blocks
+
+ and $(3<<4), %r12
+ jz _initial_num_blocks_is_0_encrypt
+ cmp $(2<<4), %r12
+ jb _initial_num_blocks_is_1_encrypt
+ je _initial_num_blocks_is_2_encrypt
+_initial_num_blocks_is_3_encrypt:
+ INITIAL_BLOCKS 3, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 5, 678, enc
+ sub $48, %r13
+ jmp _initial_blocks_encrypted
+_initial_num_blocks_is_2_encrypt:
+ INITIAL_BLOCKS 2, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 6, 78, enc
+ sub $32, %r13
+ jmp _initial_blocks_encrypted
+_initial_num_blocks_is_1_encrypt:
+ INITIAL_BLOCKS 1, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 7, 8, enc
+ sub $16, %r13
+ jmp _initial_blocks_encrypted
+_initial_num_blocks_is_0_encrypt:
+ INITIAL_BLOCKS 0, %xmm9, %xmm10, %xmm13, %xmm11, %xmm12, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8, %xmm5, %xmm6, 8, 0, enc
+_initial_blocks_encrypted:
+
+ # Main loop - Encrypt remaining blocks
+
+ cmp $0, %r13
+ je _zero_cipher_left_encrypt
+ sub $64, %r13
+ je _four_cipher_left_encrypt
+_encrypt_by_4_encrypt:
+ GHASH_4_ENCRYPT_4_PARALLEL %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
+ add $64, %r11
+ sub $64, %r13
+ jne _encrypt_by_4_encrypt
+_four_cipher_left_encrypt:
+ GHASH_LAST_4 %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm15, %xmm1, %xmm2, %xmm3, %xmm4, %xmm8
+_zero_cipher_left_encrypt:
+ mov %arg4, %r13
+ and $15, %r13 # %r13 = arg4 (mod 16)
+ je _multiple_of_16_bytes_encrypt
+
+ # Handle the last <16 Byte block seperately
+
+ paddd ONE(%rip), %xmm0 # INCR CNT to get Yn
+ pshufb SHUF_MASK(%rip), %xmm0
+ ENCRYPT_SINGLE_BLOCK %xmm0 # Encrypt(K, Yn)
+ sub $16, %r11
+ add %r13, %r11
+ movdqu (%arg3,%r11,1), %xmm1 # recieve the last <16 byte blocks
+ lea SHIFT_MASK+16(%rip), %r12
+ sub %r13, %r12 # adjust the shuffle mask pointer to be able to shift 16-r13 bytes
+ # (%r13 is the number of bytes in plaintext mod 16)
+ movdqu (%r12), %xmm2 # get the appropriate shuffle mask
+ pshufb %xmm2, %xmm1 # shift right 16-r13 byte
+ pxor %xmm1, %xmm0 # Plaintext XOR Encrypt(K, Yn)
+ movdqu ALL_F-SHIFT_MASK(%r12), %xmm1 # get the appropriate mask to mask out top 16-r13 bytes of xmm0
+ pand %xmm1, %xmm0 # mask out top 16-r13 bytes of xmm0
+
+ pshufb SHUF_MASK(%rip),%xmm0
+ pxor %xmm0, %xmm8
+ GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6 # GHASH computation for the last <16 byte block
+ sub %r13, %r11
+ add $16, %r11
+ pshufb SHUF_MASK(%rip), %xmm0 # shuffle xmm0 back to output as ciphertext
+
+ # Output %r13 bytes
+
+ movq %xmm0, %rax
+ cmp $8, %r13
+ jle _less_than_8_bytes_left_encrypt
+ mov %rax, (%arg2 , %r11, 1)
+ add $8, %r11
+ psrldq $8, %xmm0
+ movq %xmm0, %rax
+ sub $8, %r13
+_less_than_8_bytes_left_encrypt:
+ mov %al, (%arg2, %r11, 1)
+ add $1, %r11
+ shr $8, %rax
+ sub $1, %r13
+ jne _less_than_8_bytes_left_encrypt
+_multiple_of_16_bytes_encrypt:
+ mov arg8, %r12 # %r12 = addLen (number of bytes)
+ shl $3, %r12
+ movd %r12d, %xmm15 # len(A) in %xmm15
+ shl $3, %arg4 # len(C) in bits (*128)
+ movq %arg4, %xmm1
+ pslldq $8, %xmm15 # %xmm15 = len(A)||0x0000000000000000
+ pxor %xmm1, %xmm15 # %xmm15 = len(A)||len(C)
+ pxor %xmm15, %xmm8
+ GHASH_MUL %xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6 # final GHASH computation
+
+ pshufb SHUF_MASK(%rip), %xmm8 # perform a 16 byte swap
+ mov %arg5, %rax # %rax = *Y0
+ movdqu (%rax), %xmm0 # %xmm0 = Y0
+ ENCRYPT_SINGLE_BLOCK %xmm0 # Encrypt(K, Y0)
+ pxor %xmm8, %xmm0
+_return_T_encrypt:
+ mov arg9, %r10 # %r10 = authTag
+ mov arg10, %r11 # %r11 = auth_tag_len
+ cmp $16, %r11
+ je _T_16_encrypt
+ cmp $12, %r11
+ je _T_12_encrypt
+_T_8_encrypt:
+ movq %xmm0, %rax
+ mov %rax, (%r10)
+ jmp _return_T_done_encrypt
+_T_12_encrypt:
+ movq %xmm0, %rax
+ mov %rax, (%r10)
+ psrldq $8, %xmm0
+ movd %xmm0, %eax
+ mov %eax, 8(%r10)
+ jmp _return_T_done_encrypt
+_T_16_encrypt:
+ movdqu %xmm0, (%r10)
+_return_T_done_encrypt:
+ mov %r14, %rsp
+ pop %r14
+ pop %r13
+ pop %r12
+ ret
+
+#include <asm/inst.h>
+
_key_expansion_128:
_key_expansion_256a:
pshufd $0b11111111, %xmm1, %xmm1
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 2cb3dcc..f0b0a6f 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -5,6 +5,14 @@
* Copyright (C) 2008, Intel Corp.
* Author: Huang Ying <[email protected]>
*
+ * Added RFC4106 AES-GCM support for 128-bit keys under the AEAD
+ * interface for 64-bit kernels.
+ * Authors: Adrian Hoban <[email protected]>
+ * Gabriele Paoloni <[email protected]>
+ * Tadeusz Struk ([email protected])
+ * Aidan O'Mahony ([email protected])
+ * Copyright (c) 2010, Intel Corporation.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -21,6 +29,10 @@
#include <crypto/ctr.h>
#include <asm/i387.h>
#include <asm/aes.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/aead.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
#if defined(CONFIG_CRYPTO_CTR) || defined(CONFIG_CRYPTO_CTR_MODULE)
#define HAS_CTR
@@ -42,8 +54,31 @@ struct async_aes_ctx {
struct cryptd_ablkcipher *cryptd_tfm;
};
-#define AESNI_ALIGN 16
+/* This data is stored at the end of the crypto_tfm struct.
+ * It's a type of per "session" data storage location.
+ * This needs to be 16 byte aligned.
+ */
+struct aesni_rfc4106_gcm_ctx {
+ u8 hash_subkey[16];
+ struct crypto_aes_ctx aes_key_expanded;
+ u8 nonce[4];
+ struct cryptd_aead *cryptd_tfm;
+};
+
+struct aesni_gcm_set_hash_subkey_result {
+ int err;
+ struct completion completion;
+};
+
+struct aesni_hash_subkey_req_data {
+ u8 iv[16];
+ struct aesni_gcm_set_hash_subkey_result result;
+ struct scatterlist sg;
+};
+
+#define AESNI_ALIGN (16)
#define AES_BLOCK_MASK (~(AES_BLOCK_SIZE-1))
+#define RFC4106_HASH_SUBKEY_SIZE 16
asmlinkage int aesni_set_key(struct crypto_aes_ctx *ctx, const u8 *in_key,
unsigned int key_len);
@@ -62,6 +97,57 @@ asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
asmlinkage void aesni_ctr_enc(struct crypto_aes_ctx *ctx, u8 *out,
const u8 *in, unsigned int len, u8 *iv);
+/* asmlinkage void aesni_gcm_enc()
+ * void *ctx, AES Key schedule. Starts on a 16 byte boundary.
+ * u8 *out, Ciphertext output. Encrypt in-place is allowed.
+ * const u8 *in, Plaintext input
+ * unsigned long plaintext_len, Length of data in bytes for encryption.
+ * u8 *iv, Pre-counter block j0: 4 byte salt (from Security Association)
+ * concatenated with 8 byte Initialisation Vector (from IPSec ESP
+ * Payload) concatenated with 0x00000001. 16-byte aligned pointer.
+ * u8 *hash_subkey, the Hash sub key input. Data starts on a 16-byte boundary.
+ * const u8 *aad, Additional Authentication Data (AAD)
+ * unsigned long aad_len, Length of AAD in bytes. With RFC4106 this
+ * is going to be 8 or 12 bytes
+ * u8 *auth_tag, Authenticated Tag output.
+ * unsigned long auth_tag_len), Authenticated Tag Length in bytes.
+ * Valid values are 16 (most likely), 12 or 8.
+ */
+asmlinkage void aesni_gcm_enc(void *ctx, u8 *out,
+ const u8 *in, unsigned long plaintext_len, u8 *iv,
+ u8 *hash_subkey, const u8 *aad, unsigned long aad_len,
+ u8 *auth_tag, unsigned long auth_tag_len);
+
+/* asmlinkage void aesni_gcm_dec()
+ * void *ctx, AES Key schedule. Starts on a 16 byte boundary.
+ * u8 *out, Plaintext output. Decrypt in-place is allowed.
+ * const u8 *in, Ciphertext input
+ * unsigned long ciphertext_len, Length of data in bytes for decryption.
+ * u8 *iv, Pre-counter block j0: 4 byte salt (from Security Association)
+ * concatenated with 8 byte Initialisation Vector (from IPSec ESP
+ * Payload) concatenated with 0x00000001. 16-byte aligned pointer.
+ * u8 *hash_subkey, the Hash sub key input. Data starts on a 16-byte boundary.
+ * const u8 *aad, Additional Authentication Data (AAD)
+ * unsigned long aad_len, Length of AAD in bytes. With RFC4106 this is going
+ * to be 8 or 12 bytes
+ * u8 *auth_tag, Authenticated Tag output.
+ * unsigned long auth_tag_len) Authenticated Tag Length in bytes.
+ * Valid values are 16 (most likely), 12 or 8.
+ */
+asmlinkage void aesni_gcm_dec(void *ctx, u8 *out,
+ const u8 *in, unsigned long ciphertext_len, u8 *iv,
+ u8 *hash_subkey, const u8 *aad, unsigned long aad_len,
+ u8 *auth_tag, unsigned long auth_tag_len);
+
+static inline struct
+aesni_rfc4106_gcm_ctx *aesni_rfc4106_gcm_ctx_get(struct crypto_aead *tfm)
+{
+ return
+ (struct aesni_rfc4106_gcm_ctx *)
+ PTR_ALIGN((u8 *)
+ crypto_tfm_ctx(crypto_aead_tfm(tfm)), AESNI_ALIGN);
+}
+
static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
{
unsigned long addr = (unsigned long)raw_ctx;
@@ -730,6 +816,422 @@ static struct crypto_alg ablk_xts_alg = {
};
#endif
+static int rfc4106_init(struct crypto_tfm *tfm)
+{
+ struct cryptd_aead *cryptd_tfm;
+ struct aesni_rfc4106_gcm_ctx *ctx = (struct aesni_rfc4106_gcm_ctx *)
+ PTR_ALIGN((u8 *)crypto_tfm_ctx(tfm), AESNI_ALIGN);
+ cryptd_tfm = cryptd_alloc_aead("__driver-gcm-aes-aesni", 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+ ctx->cryptd_tfm = cryptd_tfm;
+ tfm->crt_aead.reqsize = sizeof(struct aead_request)
+ + crypto_aead_reqsize(&cryptd_tfm->base);
+ return 0;
+}
+
+static void rfc4106_exit(struct crypto_tfm *tfm)
+{
+ struct aesni_rfc4106_gcm_ctx *ctx =
+ (struct aesni_rfc4106_gcm_ctx *)
+ PTR_ALIGN((u8 *)crypto_tfm_ctx(tfm), AESNI_ALIGN);
+ if (!IS_ERR(ctx->cryptd_tfm))
+ cryptd_free_aead(ctx->cryptd_tfm);
+ return;
+}
+
+static void
+rfc4106_set_hash_subkey_done(struct crypto_async_request *req, int err)
+{
+ struct aesni_gcm_set_hash_subkey_result *result = req->data;
+
+ if (err == -EINPROGRESS)
+ return;
+ result->err = err;
+ complete(&result->completion);
+}
+
+static int
+rfc4106_set_hash_subkey(u8 *hash_subkey, const u8 *key, unsigned int key_len)
+{
+ struct crypto_ablkcipher *ctr_tfm;
+ struct ablkcipher_request *req;
+ int ret = -EINVAL;
+ struct aesni_hash_subkey_req_data *req_data;
+
+ ctr_tfm = crypto_alloc_ablkcipher("ctr(aes)", 0, 0);
+ if (IS_ERR(ctr_tfm))
+ return PTR_ERR(ctr_tfm);
+
+ crypto_ablkcipher_clear_flags(ctr_tfm, ~0);
+
+ ret = crypto_ablkcipher_setkey(ctr_tfm, key, key_len);
+ if (ret) {
+ crypto_free_ablkcipher(ctr_tfm);
+ return ret;
+ }
+
+ req = ablkcipher_request_alloc(ctr_tfm, GFP_KERNEL);
+ if (!req) {
+ crypto_free_ablkcipher(ctr_tfm);
+ return -EINVAL;
+ }
+
+ req_data = kmalloc(sizeof(*req_data), GFP_KERNEL);
+ if (!req_data) {
+ crypto_free_ablkcipher(ctr_tfm);
+ return -ENOMEM;
+ }
+ memset(req_data->iv, 0, sizeof(req_data->iv));
+
+ /* Clear the data in the hash sub key container to zero.*/
+ /* We want to cipher all zeros to create the hash sub key. */
+ memset(hash_subkey, 0, RFC4106_HASH_SUBKEY_SIZE);
+
+ init_completion(&req_data->result.completion);
+ sg_init_one(&req_data->sg, hash_subkey, RFC4106_HASH_SUBKEY_SIZE);
+ ablkcipher_request_set_tfm(req, ctr_tfm);
+ ablkcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP |
+ CRYPTO_TFM_REQ_MAY_BACKLOG,
+ rfc4106_set_hash_subkey_done,
+ &req_data->result);
+
+ ablkcipher_request_set_crypt(req, &req_data->sg,
+ &req_data->sg, RFC4106_HASH_SUBKEY_SIZE, req_data->iv);
+
+ ret = crypto_ablkcipher_encrypt(req);
+ if (ret == -EINPROGRESS || ret == -EBUSY) {
+ ret = wait_for_completion_interruptible
+ (&req_data->result.completion);
+ if (!ret)
+ ret = req_data->result.err;
+ }
+ ablkcipher_request_free(req);
+ kfree(req_data);
+ crypto_free_ablkcipher(ctr_tfm);
+ return ret;
+}
+
+static int rfc4106_set_key(struct crypto_aead *parent, const u8 *key,
+ unsigned int key_len)
+{
+ int ret = 0;
+ struct crypto_tfm *tfm = crypto_aead_tfm(parent);
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(parent);
+ u8 *new_key_mem = NULL;
+
+ if (key_len < 4) {
+ crypto_tfm_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ /*Account for 4 byte nonce at the end.*/
+ key_len -= 4;
+ if (key_len != AES_KEYSIZE_128) {
+ crypto_tfm_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ memcpy(ctx->nonce, key + key_len, sizeof(ctx->nonce));
+ /*This must be on a 16 byte boundary!*/
+ if ((unsigned long)(&(ctx->aes_key_expanded.key_enc[0])) % AESNI_ALIGN)
+ return -EINVAL;
+
+ if ((unsigned long)key % AESNI_ALIGN) {
+ /*key is not aligned: use an auxuliar aligned pointer*/
+ new_key_mem = kmalloc(key_len+AESNI_ALIGN, GFP_KERNEL);
+ if (!new_key_mem)
+ return -ENOMEM;
+
+ new_key_mem = PTR_ALIGN(new_key_mem, AESNI_ALIGN);
+ memcpy(new_key_mem, key, key_len);
+ key = new_key_mem;
+ }
+
+ if (!irq_fpu_usable())
+ ret = crypto_aes_expand_key(&(ctx->aes_key_expanded),
+ key, key_len);
+ else {
+ kernel_fpu_begin();
+ ret = aesni_set_key(&(ctx->aes_key_expanded), key, key_len);
+ kernel_fpu_end();
+ }
+ /*This must be on a 16 byte boundary!*/
+ if ((unsigned long)(&(ctx->hash_subkey[0])) % AESNI_ALIGN) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ ret = rfc4106_set_hash_subkey(ctx->hash_subkey, key, key_len);
+exit:
+ kfree(new_key_mem);
+ return ret;
+}
+
+/* This is the Integrity Check Value (aka the authentication tag length and can
+ * be 8, 12 or 16 bytes long. */
+static int rfc4106_set_authsize(struct crypto_aead *parent,
+ unsigned int authsize)
+{
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(parent);
+ struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm);
+
+ switch (authsize) {
+ case 8:
+ case 12:
+ case 16:
+ break;
+ default:
+ return -EINVAL;
+ }
+ crypto_aead_crt(parent)->authsize = authsize;
+ crypto_aead_crt(cryptd_child)->authsize = authsize;
+ return 0;
+}
+
+static int rfc4106_encrypt(struct aead_request *req)
+{
+ int ret;
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm);
+ struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm);
+
+ if (!irq_fpu_usable()) {
+ struct aead_request *cryptd_req =
+ (struct aead_request *) aead_request_ctx(req);
+ memcpy(cryptd_req, req, sizeof(*req));
+ aead_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+ return crypto_aead_encrypt(cryptd_req);
+ } else {
+ kernel_fpu_begin();
+ ret = cryptd_child->base.crt_aead.encrypt(req);
+ kernel_fpu_end();
+ return ret;
+ }
+}
+
+static int rfc4106_decrypt(struct aead_request *req)
+{
+ int ret;
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm);
+ struct crypto_aead *cryptd_child = cryptd_aead_child(ctx->cryptd_tfm);
+
+ if (!irq_fpu_usable()) {
+ struct aead_request *cryptd_req =
+ (struct aead_request *) aead_request_ctx(req);
+ memcpy(cryptd_req, req, sizeof(*req));
+ aead_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+ return crypto_aead_decrypt(cryptd_req);
+ } else {
+ kernel_fpu_begin();
+ ret = cryptd_child->base.crt_aead.decrypt(req);
+ kernel_fpu_end();
+ return ret;
+ }
+}
+
+static struct crypto_alg rfc4106_alg = {
+ .cra_name = "rfc4106(gcm(aes))",
+ .cra_driver_name = "rfc4106-gcm-aesni",
+ .cra_priority = 400,
+ .cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct aesni_rfc4106_gcm_ctx) + AESNI_ALIGN,
+ .cra_alignmask = 0,
+ .cra_type = &crypto_nivaead_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(rfc4106_alg.cra_list),
+ .cra_init = rfc4106_init,
+ .cra_exit = rfc4106_exit,
+ .cra_u = {
+ .aead = {
+ .setkey = rfc4106_set_key,
+ .setauthsize = rfc4106_set_authsize,
+ .encrypt = rfc4106_encrypt,
+ .decrypt = rfc4106_decrypt,
+ .geniv = "seqiv",
+ .ivsize = 8,
+ .maxauthsize = 16,
+ },
+ },
+};
+
+static int __driver_rfc4106_encrypt(struct aead_request *req)
+{
+ u8 one_entry_in_sg = 0;
+ u8 *src, *dst, *assoc;
+ __be32 counter = cpu_to_be32(1);
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm);
+ void *aes_ctx = &(ctx->aes_key_expanded);
+ unsigned long auth_tag_len = crypto_aead_authsize(tfm);
+ u8 iv_tab[16+AESNI_ALIGN];
+ u8* iv = (u8 *) PTR_ALIGN((u8 *)iv_tab, AESNI_ALIGN);
+ struct scatter_walk src_sg_walk;
+ struct scatter_walk assoc_sg_walk;
+ struct scatter_walk dst_sg_walk;
+ unsigned int i;
+
+ /* Assuming we are supporting rfc4106 64-bit extended */
+ /* sequence numbers We need to have the AAD length equal */
+ /* to 8 or 12 bytes */
+ if (unlikely(req->assoclen != 8 && req->assoclen != 12))
+ return -EINVAL;
+ /* IV below built */
+ for (i = 0; i < 4; i++)
+ *(iv+i) = ctx->nonce[i];
+ for (i = 0; i < 8; i++)
+ *(iv+4+i) = req->iv[i];
+ *((__be32 *)(iv+12)) = counter;
+
+ if ((sg_is_last(req->src)) && (sg_is_last(req->assoc))) {
+ one_entry_in_sg = 1;
+ scatterwalk_start(&src_sg_walk, req->src);
+ scatterwalk_start(&assoc_sg_walk, req->assoc);
+ src = scatterwalk_map(&src_sg_walk, 0);
+ assoc = scatterwalk_map(&assoc_sg_walk, 0);
+ dst = src;
+ if (unlikely(req->src != req->dst)) {
+ scatterwalk_start(&dst_sg_walk, req->dst);
+ dst = scatterwalk_map(&dst_sg_walk, 0);
+ }
+
+ } else {
+ /* Allocate memory for src, dst, assoc */
+ src = kmalloc(req->cryptlen + auth_tag_len + req->assoclen,
+ GFP_ATOMIC);
+ if (unlikely(!src))
+ return -ENOMEM;
+ assoc = (src + req->cryptlen + auth_tag_len);
+ scatterwalk_map_and_copy(src, req->src, 0, req->cryptlen, 0);
+ scatterwalk_map_and_copy(assoc, req->assoc, 0,
+ req->assoclen, 0);
+ dst = src;
+ }
+
+ aesni_gcm_enc(aes_ctx, dst, src, (unsigned long)req->cryptlen, iv,
+ ctx->hash_subkey, assoc, (unsigned long)req->assoclen, dst
+ + ((unsigned long)req->cryptlen), auth_tag_len);
+
+ /* The authTag (aka the Integrity Check Value) needs to be written
+ * back to the packet. */
+ if (one_entry_in_sg) {
+ if (unlikely(req->src != req->dst)) {
+ scatterwalk_unmap(dst, 0);
+ scatterwalk_done(&dst_sg_walk, 0, 0);
+ }
+ scatterwalk_unmap(src, 0);
+ scatterwalk_unmap(assoc, 0);
+ scatterwalk_done(&src_sg_walk, 0, 0);
+ scatterwalk_done(&assoc_sg_walk, 0, 0);
+ } else {
+ scatterwalk_map_and_copy(dst, req->dst, 0,
+ req->cryptlen + auth_tag_len, 1);
+ kfree(src);
+ }
+ return 0;
+}
+
+static int __driver_rfc4106_decrypt(struct aead_request *req)
+{
+ u8 one_entry_in_sg = 0;
+ u8 *src, *dst, *assoc;
+ unsigned long tempCipherLen = 0;
+ __be32 counter = cpu_to_be32(1);
+ int retval = 0;
+ struct crypto_aead *tfm = crypto_aead_reqtfm(req);
+ struct aesni_rfc4106_gcm_ctx *ctx = aesni_rfc4106_gcm_ctx_get(tfm);
+ void *aes_ctx = &(ctx->aes_key_expanded);
+ unsigned long auth_tag_len = crypto_aead_authsize(tfm);
+ u8 iv_and_authTag[32+AESNI_ALIGN];
+ u8 *iv = (u8 *) PTR_ALIGN((u8 *)iv_and_authTag, AESNI_ALIGN);
+ u8 *authTag = iv + 16;
+ struct scatter_walk src_sg_walk;
+ struct scatter_walk assoc_sg_walk;
+ struct scatter_walk dst_sg_walk;
+ unsigned int i;
+
+ if (unlikely((req->cryptlen < auth_tag_len) ||
+ (req->assoclen != 8 && req->assoclen != 12)))
+ return -EINVAL;
+ /* Assuming we are supporting rfc4106 64-bit extended */
+ /* sequence numbers We need to have the AAD length */
+ /* equal to 8 or 12 bytes */
+
+ tempCipherLen = (unsigned long)(req->cryptlen - auth_tag_len);
+ /* IV below built */
+ for (i = 0; i < 4; i++)
+ *(iv+i) = ctx->nonce[i];
+ for (i = 0; i < 8; i++)
+ *(iv+4+i) = req->iv[i];
+ *((__be32 *)(iv+12)) = counter;
+
+ if ((sg_is_last(req->src)) && (sg_is_last(req->assoc))) {
+ one_entry_in_sg = 1;
+ scatterwalk_start(&src_sg_walk, req->src);
+ scatterwalk_start(&assoc_sg_walk, req->assoc);
+ src = scatterwalk_map(&src_sg_walk, 0);
+ assoc = scatterwalk_map(&assoc_sg_walk, 0);
+ dst = src;
+ if (unlikely(req->src != req->dst)) {
+ scatterwalk_start(&dst_sg_walk, req->dst);
+ dst = scatterwalk_map(&dst_sg_walk, 0);
+ }
+
+ } else {
+ /* Allocate memory for src, dst, assoc */
+ src = kmalloc(req->cryptlen + req->assoclen, GFP_ATOMIC);
+ if (!src)
+ return -ENOMEM;
+ assoc = (src + req->cryptlen + auth_tag_len);
+ scatterwalk_map_and_copy(src, req->src, 0, req->cryptlen, 0);
+ scatterwalk_map_and_copy(assoc, req->assoc, 0,
+ req->assoclen, 0);
+ dst = src;
+ }
+
+ aesni_gcm_dec(aes_ctx, dst, src, tempCipherLen, iv,
+ ctx->hash_subkey, assoc, (unsigned long)req->assoclen,
+ authTag, auth_tag_len);
+
+ /* Compare generated tag with passed in tag. */
+ retval = memcmp(src + tempCipherLen, authTag, auth_tag_len) ?
+ -EBADMSG : 0;
+
+ if (one_entry_in_sg) {
+ if (unlikely(req->src != req->dst)) {
+ scatterwalk_unmap(dst, 0);
+ scatterwalk_done(&dst_sg_walk, 0, 0);
+ }
+ scatterwalk_unmap(src, 0);
+ scatterwalk_unmap(assoc, 0);
+ scatterwalk_done(&src_sg_walk, 0, 0);
+ scatterwalk_done(&assoc_sg_walk, 0, 0);
+ } else {
+ scatterwalk_map_and_copy(dst, req->dst, 0, req->cryptlen, 1);
+ kfree(src);
+ }
+ return retval;
+}
+
+static struct crypto_alg __rfc4106_alg = {
+ .cra_name = "__gcm-aes-aesni",
+ .cra_driver_name = "__driver-gcm-aes-aesni",
+ .cra_priority = 0,
+ .cra_flags = CRYPTO_ALG_TYPE_AEAD,
+ .cra_blocksize = 1,
+ .cra_ctxsize = sizeof(struct aesni_rfc4106_gcm_ctx) + AESNI_ALIGN,
+ .cra_alignmask = 0,
+ .cra_type = &crypto_aead_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(__rfc4106_alg.cra_list),
+ .cra_u = {
+ .aead = {
+ .encrypt = __driver_rfc4106_encrypt,
+ .decrypt = __driver_rfc4106_decrypt,
+ },
+ },
+};
+
static int __init aesni_init(void)
{
int err;
@@ -738,6 +1240,7 @@ static int __init aesni_init(void)
printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
return -ENODEV;
}
+
if ((err = crypto_register_alg(&aesni_alg)))
goto aes_err;
if ((err = crypto_register_alg(&__aesni_alg)))
@@ -770,10 +1273,19 @@ static int __init aesni_init(void)
if ((err = crypto_register_alg(&ablk_xts_alg)))
goto ablk_xts_err;
#endif
-
+ err = crypto_register_alg(&__rfc4106_alg);
+ if (err)
+ goto __aead_gcm_err;
+ err = crypto_register_alg(&rfc4106_alg);
+ if (err)
+ goto aead_gcm_err;
return err;
+aead_gcm_err:
+ crypto_unregister_alg(&__rfc4106_alg);
+__aead_gcm_err:
#ifdef HAS_XTS
+ crypto_unregister_alg(&ablk_xts_alg);
ablk_xts_err:
#endif
#ifdef HAS_PCBC
@@ -809,6 +1321,8 @@ aes_err:
static void __exit aesni_exit(void)
{
+ crypto_unregister_alg(&__rfc4106_alg);
+ crypto_unregister_alg(&rfc4106_alg);
#ifdef HAS_XTS
crypto_unregister_alg(&ablk_xts_alg);
#endif
--
1.5.3.rc5
--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
On Tue, Oct 12, 2010 at 09:31:41AM +0100, [email protected] wrote:
> Hi Herbert,
> Resubmitting the two other patches as requested.
> Thanks,
> Tadeusz
>
> >From 06444d8a95458d807ae14699e557739281d0b026 Mon Sep 17 00:00:00 2001
> From: Adrian Hoban <[email protected]>
> Date: Fri, 10 Sep 2010 18:08:45 +0100
> Subject: [PATCH 2/3] RFC4106 AES-GCM Driver Using Intel New Instructions
>
> This patch adds an optimized RFC4106 AES-GCM implementation for 64-bit
> kernels. It supports 128-bit AES key size. This leverages the crypto
> AEAD interface type to facilitate a combined AES & GCM operation to
> be implemented in assembly code. The assembly code leverages Intel(R)
> AES New Instructions and the PCLMULQDQ instruction.
OK this patch applies now at least. However it doesn't build:
AS [M] arch/x86/crypto/aesni-intel_asm.o
arch/x86/crypto/aesni-intel_asm.S: Assembler messages:
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm6'
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm7'
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm8'
...
I suppose you can't rely on these new binutils instructions just
yet.
Cheers,
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
Hi Herbert,
We have been using binutils v2.19.
Can you please recommend the version(s) of binutils (gas) that we should test with before submitting a patch? V2.16.1, or perhaps the older version (2.12) described in /Documentation/Changes?
We will retest with the recommended version, update the code and resubmit the patch ASAP.
Cheers,
Adrian
-----Original Message-----
From: Herbert Xu [mailto:[email protected]]
Sent: Tuesday, October 19, 2010 1:49 PM
To: Struk, Tadeusz
Cc: [email protected]; [email protected]; O Mahony, Aidan; Paoloni, Gabriele; Hoban, Adrian
Subject: Re: [PATCH 2/3] RFC4106 AES-GCM Driver Using Intel New Instructions
On Tue, Oct 12, 2010 at 09:31:41AM +0100, [email protected] wrote:
> Hi Herbert,
> Resubmitting the two other patches as requested.
> Thanks,
> Tadeusz
>
> >From 06444d8a95458d807ae14699e557739281d0b026 Mon Sep 17 00:00:00 2001
> From: Adrian Hoban <[email protected]>
> Date: Fri, 10 Sep 2010 18:08:45 +0100
> Subject: [PATCH 2/3] RFC4106 AES-GCM Driver Using Intel New Instructions
>
> This patch adds an optimized RFC4106 AES-GCM implementation for 64-bit
> kernels. It supports 128-bit AES key size. This leverages the crypto
> AEAD interface type to facilitate a combined AES & GCM operation to
> be implemented in assembly code. The assembly code leverages Intel(R)
> AES New Instructions and the PCLMULQDQ instruction.
OK this patch applies now at least.? However it doesn't build:
? AS [M]? arch/x86/crypto/aesni-intel_asm.o
arch/x86/crypto/aesni-intel_asm.S: Assembler messages:
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm6'
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm7'
arch/x86/crypto/aesni-intel_asm.S:803: Error: no such instruction: `aesenc 16*1(%rdi),%xmm8'
...
I suppose you can't rely on these new binutils instructions just
yet.
Cheers,
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
On Wed, Oct 20, 2010 at 11:49:10AM +0100, Hoban, Adrian wrote:
> Hi Herbert,
>
> We have been using binutils v2.19.
>
> Can you please recommend the version(s) of binutils (gas) that we should test with before submitting a patch? V2.16.1, or perhaps the older version (2.12) described in /Documentation/Changes?
>
> We will retest with the recommended version, update the code and resubmit the patch ASAP.
I was using 2.18 so if you can make it work with 2.16 I think it
should be fine as it wouldn't require any of the new AES instructions.
Thanks,
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt