2024-02-19 10:35:10

by Luca Weiss

[permalink] [raw]
Subject: Re: [PATCH 2/2] arm64: dts: qcom: sm6350: Add Crypto Engine

On Fri Feb 16, 2024 at 7:09 PM CET, Bjorn Andersson wrote:
> On Fri, Feb 16, 2024 at 11:46:49AM +0100, Luca Weiss wrote:
> > On Fri Jan 5, 2024 at 5:30 PM CET, Stephan Gerhold wrote:
> > > On Fri, Jan 05, 2024 at 05:15:44PM +0100, Luca Weiss wrote:
> > > > Add crypto engine (CE) and CE BAM related nodes and definitions for this
> > > > SoC.
> > > >
> > > > For reference:
> > > >
> > > > [ 2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> > > >
> > > > Signed-off-by: Luca Weiss <[email protected]>
> > > > ---
> > > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
> > > > 1 file changed, 31 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > index 8fd6f4d03490..516aadbb16bb 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> > > > @@ -1212,6 +1212,37 @@ ufs_mem_phy_lanes: phy@1d87400 {
> > > > };
> > > > };
> > > >
> > > > + cryptobam: dma-controller@1dc4000 {
> > > > + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> > > > + reg = <0 0x01dc4000 0 0x24000>;
> > > > + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> > > > + #dma-cells = <1>;
> > > > + qcom,ee = <0>;
> > > > + qcom,controlled-remotely;
> > > > + num-channels = <16>;
> > > > + qcom,num-ees = <4>;
> > > > + iommus = <&apps_smmu 0x432 0x0000>,
> > > > + <&apps_smmu 0x438 0x0001>,
> > > > + <&apps_smmu 0x43f 0x0000>,
> > > > + <&apps_smmu 0x426 0x0011>,
> > > > + <&apps_smmu 0x436 0x0011>;
> > >
> > > The last two lines look equivalent to me: 0x436 & ~0x0011 = 0x426.
> >
> > I don't understand the IOMMU SID + mask really, but I think I've seen
> > somewhere before like here that TZ can be a bit picky with the SIDs?
> >
> > https://lore.kernel.org/linux-arm-msm/opqdrmyj3y64nqqqmakjydn5rkspizufyeavm7ec7c7ufqz4wk@ey2a7bq3shfj/
> > https://lore.kernel.org/linux-arm-msm/[email protected]/
> >
> > I don't quite want to risk having some obscure use case breaking because
> > we cleaned up the dts ;)
> >
> > But if you're more sure than me that it won't break, let me know!
> >
> > >
> > > It's also a bit weird that the mask has one more digit than the stream
> > > ID. And ordered numerically (by stream ID, first number) it would be a
> > > bit easier to read. :-)
> >
> > Sorting them is no problem, can do that for v2.
> >
>
> Where you able to do this? I don't see a v2 in my inbox, am I just
> searching poorly?

Only sent v2 some minutes ago, didn't have any more time on Friday.

Regards
Luca

>
> Regards,
> Bjorn
>
> > >
> > > Thanks,
> > > Stephan
> >