by Pankaj Gupta

[permalink] [raw]

Subject: Re: [Qemu-devel] [PATCH v7 2/6] virtio-pmem: Add virtio pmem driver

> >
> > Hi Dan,
> >
> > Thank you for the review. Please see my reply inline.
> >
> > >
> > > Hi Pankaj,
> > >
> > > Some minor file placement comments below.
> >
> > Sure.
> >
> > >
> > > On Thu, Apr 25, 2019 at 10:02 PM Pankaj Gupta <[email protected]> wrote:
> > > >
> > > > This patch adds virtio-pmem driver for KVM guest.
> > > >
> > > > Guest reads the persistent memory range information from
> > > > Qemu over VIRTIO and registers it on nvdimm_bus. It also
> > > > creates a nd_region object with the persistent memory
> > > > range information so that existing 'nvdimm/pmem' driver
> > > > can reserve this into system memory map. This way
> > > > 'virtio-pmem' driver uses existing functionality of pmem
> > > > driver to register persistent memory compatible for DAX
> > > > capable filesystems.
> > > >
> > > > This also provides function to perform guest flush over
> > > > VIRTIO from 'pmem' driver when userspace performs flush
> > > > on DAX memory range.
> > > >
> > > > Signed-off-by: Pankaj Gupta <[email protected]>
> > > > ---
> > > > drivers/nvdimm/virtio_pmem.c | 114 +++++++++++++++++++++++++++++
> > > > drivers/virtio/Kconfig | 10 +++
> > > > drivers/virtio/Makefile | 1 +
> > > > drivers/virtio/pmem.c | 118 +++++++++++++++++++++++++++++++
> > > > include/linux/virtio_pmem.h | 60 ++++++++++++++++
> > > > include/uapi/linux/virtio_ids.h | 1 +
> > > > include/uapi/linux/virtio_pmem.h | 10 +++
> > > > 7 files changed, 314 insertions(+)
> > > > create mode 100644 drivers/nvdimm/virtio_pmem.c
> > > > create mode 100644 drivers/virtio/pmem.c
> > > > create mode 100644 include/linux/virtio_pmem.h
> > > > create mode 100644 include/uapi/linux/virtio_pmem.h
> > > >
> > > > diff --git a/drivers/nvdimm/virtio_pmem.c
> > > > b/drivers/nvdimm/virtio_pmem.c
> > > > new file mode 100644
> > > > index 000000000000..66b582f751a3
> > > > --- /dev/null
> > > > +++ b/drivers/nvdimm/virtio_pmem.c
> > > > @@ -0,0 +1,114 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * virtio_pmem.c: Virtio pmem Driver
> > > > + *
> > > > + * Discovers persistent memory range information
> > > > + * from host and provides a virtio based flushing
> > > > + * interface.
> > > > + */
> > > > +#include <linux/virtio_pmem.h>
> > > > +#include "nd.h"
> > > > +
> > > > + /* The interrupt handler */
> > > > +void host_ack(struct virtqueue *vq)
> > > > +{
> > > > + unsigned int len;
> > > > + unsigned long flags;
> > > > + struct virtio_pmem_request *req, *req_buf;
> > > > + struct virtio_pmem *vpmem = vq->vdev->priv;
> > > > +
> > > > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > > > + while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
> > > > + req->done = true;
> > > > + wake_up(&req->host_acked);
> > > > +
> > > > + if (!list_empty(&vpmem->req_list)) {
> > > > + req_buf = list_first_entry(&vpmem->req_list,
> > > > + struct virtio_pmem_request,
> > > > list);
> > > > + list_del(&vpmem->req_list);
> > > > + req_buf->wq_buf_avail = true;
> > > > + wake_up(&req_buf->wq_buf);
> > > > + }
> > > > + }
> > > > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(host_ack);
> > > > +
> > > > + /* The request submission function */
> > > > +int virtio_pmem_flush(struct nd_region *nd_region)
> > > > +{
> > > > + int err;
> > > > + unsigned long flags;
> > > > + struct scatterlist *sgs[2], sg, ret;
> > > > + struct virtio_device *vdev = nd_region->provider_data;
> > > > + struct virtio_pmem *vpmem = vdev->priv;
> > > > + struct virtio_pmem_request *req;
> > > > +
> > > > + might_sleep();
> > > > + req = kmalloc(sizeof(*req), GFP_KERNEL);
> > > > + if (!req)
> > > > + return -ENOMEM;
> > > > +
> > > > + req->done = req->wq_buf_avail = false;
> > > > + strcpy(req->name, "FLUSH");
> > > > + init_waitqueue_head(&req->host_acked);
> > > > + init_waitqueue_head(&req->wq_buf);
> > > > + sg_init_one(&sg, req->name, strlen(req->name));
> > > > + sgs[0] = &sg;
> > > > + sg_init_one(&ret, &req->ret, sizeof(req->ret));
> > > > + sgs[1] = &ret;
> > > > +
> > > > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > > > + err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
> > > > GFP_ATOMIC);
> > > > + if (err) {
> > > > + dev_err(&vdev->dev, "failed to send command to virtio
> > > > pmem
> > > > device\n");
> > > > +
> > > > + list_add_tail(&vpmem->req_list, &req->list);
> > > > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > > > +
> > > > + /* When host has read buffer, this completes via
> > > > host_ack
> > > > */
> > > > + wait_event(req->wq_buf, req->wq_buf_avail);
> > > > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > > > + }
> > > > + err = virtqueue_kick(vpmem->req_vq);
> > > > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > > > +
> > > > + if (!err) {
> > > > + err = -EIO;
> > > > + goto ret;
> > > > + }
> > > > + /* When host has read buffer, this completes via host_ack */
> > > > + wait_event(req->host_acked, req->done);
> > > > + err = req->ret;
> > > > +ret:
> > > > + kfree(req);
> > > > + return err;
> > > > +};
> > > > +
> > > > + /* The asynchronous flush callback function */
> > > > +int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
> > > > +{
> > > > + int rc = 0;
> > > > +
> > > > + /* Create child bio for asynchronous flush and chain with
> > > > + * parent bio. Otherwise directly call nd_region flush.
> > > > + */
> > > > + if (bio && bio->bi_iter.bi_sector != -1) {
> > > > + struct bio *child = bio_alloc(GFP_ATOMIC, 0);
> > > > +
> > > > + if (!child)
> > > > + return -ENOMEM;
> > > > + bio_copy_dev(child, bio);
> > > > + child->bi_opf = REQ_PREFLUSH;
> > > > + child->bi_iter.bi_sector = -1;
> > > > + bio_chain(child, bio);
> > > > + submit_bio(child);
> > > > + } else {
> > > > + if (virtio_pmem_flush(nd_region))
> > > > + rc = -EIO;
> > > > + }
> > > > +
> > > > + return rc;
> > > > +};
> > > > +EXPORT_SYMBOL_GPL(async_pmem_flush);
> > > > +MODULE_LICENSE("GPL");
> > > > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > > > index 35897649c24f..9f634a2ed638 100644
> > > > --- a/drivers/virtio/Kconfig
> > > > +++ b/drivers/virtio/Kconfig
> > > > @@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
> > > >
> > > > If unsure, say Y.
> > > >
> > > > +config VIRTIO_PMEM
> > > > + tristate "Support for virtio pmem driver"
> > > > + depends on VIRTIO
> > > > + depends on LIBNVDIMM
> > > > + help
> > > > + This driver provides support for virtio based flushing
> > > > interface
> > > > + for persistent memory range.
> > > > +
> > > > + If unsure, say M.
> > > > +
> > > > config VIRTIO_BALLOON
> > > > tristate "Virtio balloon driver"
> > > > depends on VIRTIO
> > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > index 3a2b5c5dcf46..143ce91eabe9 100644
> > > > --- a/drivers/virtio/Makefile
> > > > +++ b/drivers/virtio/Makefile
> > > > @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > > > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > > > obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > > > +obj-$(CONFIG_VIRTIO_PMEM) += pmem.o ../nvdimm/virtio_pmem.o
> > > > diff --git a/drivers/virtio/pmem.c b/drivers/virtio/pmem.c
> > > > new file mode 100644
> > > > index 000000000000..309788628e41
> > > > --- /dev/null
> > > > +++ b/drivers/virtio/pmem.c
> > >
> > > It's not clear to me why this driver is located in drivers/virtio/
> >
> > Like other VIRTIO drivers, I placed it initially in drivers/virtio
> > directory.
> >
> > >
> > > > @@ -0,0 +1,118 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * virtio_pmem.c: Virtio pmem Driver
> > > > + *
> > > > + * Discovers persistent memory range information
> > > > + * from host and registers the virtual pmem device
> > > > + * with libnvdimm core.
> > > > + */
> > > > +#include <linux/virtio_pmem.h>
> > > > +#include <../../drivers/nvdimm/nd.h>
> > >
> > > ...especially because it seems to require nvdimm internals.
> > >
> > > However I don't see why that header is included.
> >
> > Removed.
> >
> > >
> > > In any event lets move this to drivers/nvdimm/virtio.c to live
> > > alongside the other generic bus provider drivers/nvdimm/e820.c.
> >
> > o.k. Makes sense.
> >
> > >
> > > > +
> > > > +static struct virtio_device_id id_table[] = {
> > > > + { VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > > > + { 0 },
> > > > +};
> > > > +
> > > > + /* Initialize virt queue */
> > > > +static int init_vq(struct virtio_pmem *vpmem)
> > > > +{
> > > > + /* single vq */
> > > > + vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
> > > > + host_ack, "flush_queue");
> > > > + if (IS_ERR(vpmem->req_vq))
> > > > + return PTR_ERR(vpmem->req_vq);
> > > > +
> > > > + spin_lock_init(&vpmem->pmem_lock);
> > > > + INIT_LIST_HEAD(&vpmem->req_list);
> > > > +
> > > > + return 0;
> > > > +};
> > > > +
> > > > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > > > +{
> > > > + int err = 0;
> > > > + struct resource res;
> > > > + struct virtio_pmem *vpmem;
> > > > + struct nd_region_desc ndr_desc = {};
> > > > + int nid = dev_to_node(&vdev->dev);
> > > > + struct nd_region *nd_region;
> > > > +
> > > > + if (!vdev->config->get) {
> > > > + dev_err(&vdev->dev, "%s failure: config access
> > > > disabled\n",
> > > > + __func__);
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > + vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
> > > > + if (!vpmem) {
> > > > + err = -ENOMEM;
> > > > + goto out_err;
> > > > + }
> > > > +
> > > > + vpmem->vdev = vdev;
> > > > + vdev->priv = vpmem;
> > > > + err = init_vq(vpmem);
> > > > + if (err)
> > > > + goto out_err;
> > > > +
> > > > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > > > + start, &vpmem->start);
> > > > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > > > + size, &vpmem->size);
> > > > +
> > > > + res.start = vpmem->start;
> > > > + res.end = vpmem->start + vpmem->size-1;
> > > > + vpmem->nd_desc.provider_name = "virtio-pmem";
> > > > + vpmem->nd_desc.module = THIS_MODULE;
> > > > +
> > > > + vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > > > + &vpmem->nd_desc);
> > > > + if (!vpmem->nvdimm_bus)
> > > > + goto out_vq;
> > > > +
> > > > + dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
> > > > +
> > > > + ndr_desc.res = &res;
> > > > + ndr_desc.numa_node = nid;
> > > > + ndr_desc.flush = async_pmem_flush;
> > > > + set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > > > + set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
> > > > + nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus,
> > > > &ndr_desc);
> > > > +
> > > > + if (!nd_region)
> > > > + goto out_nd;
> > > > + nd_region->provider_data = dev_to_virtio
> > > > +
> > > > (nd_region->dev.parent->parent);
> > > > + return 0;
> > > > +out_nd:
> > > > + err = -ENXIO;
> > > > + nvdimm_bus_unregister(vpmem->nvdimm_bus);
> > > > +out_vq:
> > > > + vdev->config->del_vqs(vdev);
> > > > +out_err:
> > > > + dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> > > > + return err;
> > > > +}
> > > > +
> > > > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > > > +{
> > > > + struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > > > +
> > > > + nvdimm_bus_unregister(nvdimm_bus);
> > > > + vdev->config->del_vqs(vdev);
> > > > + vdev->config->reset(vdev);
> > > > +}
> > > > +
> > > > +static struct virtio_driver virtio_pmem_driver = {
> > > > + .driver.name = KBUILD_MODNAME,
> > > > + .driver.owner = THIS_MODULE,
> > > > + .id_table = id_table,
> > > > + .probe = virtio_pmem_probe,
> > > > + .remove = virtio_pmem_remove,
> > > > +};
> > > > +
> > > > +module_virtio_driver(virtio_pmem_driver);
> > > > +MODULE_DEVICE_TABLE(virtio, id_table);
> > > > +MODULE_DESCRIPTION("Virtio pmem driver");
> > > > +MODULE_LICENSE("GPL");
> > > > diff --git a/include/linux/virtio_pmem.h b/include/linux/virtio_pmem.h
> > > > new file mode 100644
> > > > index 000000000000..ab1da877575d
> > > > --- /dev/null
> > > > +++ b/include/linux/virtio_pmem.h
> > >
> > > Why is this a global header?
> >
> > This is where other virtio driver headers are also placed.
> > I think this is to access uapi config file in :
> >
> > ./include/uapi/linux/virtio_pmem.h
> >
> > Is it okay if we keep 'virtio_pmem.h' in global header?
>
> No, I don't think so. While virtio_console.h and virtio_net.h make
> sense as global headers because they are consumed from multiple
> drivers, there is no need for virtio_caif.h, for example, to be a
> global header. I see no practical reason that the private details of
> virtio_pmem.h need to be made available outside of the virtio_pmem.c
> consumer.

o.k. Will move it.

Best regards,
Pankaj
>
>