We splite legacy(3945/4965) from iwlwifi into separated directory(iwlegacy)
We also fix few firmware related problems
Wey-Yi Guy (3):
iwlwifi: Limit number of firmware reload
iwlwifi: Loading correct uCode again when fail to load
iwlwifi: enable 2-wire bt coex support for non-combo device
Meenakshi Venkataraman (1):
iwlwifi: split the drivers for agn and legacy devices 3945/4965
these patches are also available from wireless-next-2.6 branch on
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
drivers/net/wireless/Kconfig | 1 +
drivers/net/wireless/Makefile | 3 +-
drivers/net/wireless/iwlwifi/Kconfig | 124 +-
drivers/net/wireless/iwlwifi/Makefile | 39 +-
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 ---
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 -
drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 -
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 --
drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 -
drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 -
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------
drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 ---------------
drivers/net/wireless/iwlwifi/iwl-3945.h | 308 --
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 -----
drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 --------------
drivers/net/wireless/iwlwifi/iwl-agn.c | 35 +-
drivers/net/wireless/iwlwifi/iwl-core.c | 76 +-
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 -
drivers/net/wireless/iwlwifi/iwl-dev.h | 13 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 -
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 -
drivers/net/wireless/iwlwifi/iwl-led.c | 2 -
drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ----
drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 -
drivers/net/wireless/iwlwifi/iwl-power.c | 3 -
drivers/net/wireless/iwlwifi/iwl-rx.c | 6 -
drivers/net/wireless/iwlwifi/iwl-scan.c | 10 -
drivers/net/wireless/iwlwifi/iwl-sta.c | 11 -
drivers/net/wireless/iwlwifi/iwl-tx.c | 7 -
drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 -----------------------
30 files changed, 106 insertions(+), 14049 deletions(-)
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c
John,
Please drop this series of patches, I will resubmit
Thanks
Wey
On Mon, 2011-02-21 at 11:06 -0800, Guy, Wey-Yi W wrote:
> We splite legacy(3945/4965) from iwlwifi into separated directory(iwlegacy)
> We also fix few firmware related problems
>
> Wey-Yi Guy (3):
> iwlwifi: Limit number of firmware reload
> iwlwifi: Loading correct uCode again when fail to load
> iwlwifi: enable 2-wire bt coex support for non-combo device
>
> Meenakshi Venkataraman (1):
> iwlwifi: split the drivers for agn and legacy devices 3945/4965
>
> these patches are also available from wireless-next-2.6 branch on
> git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
>
> drivers/net/wireless/Kconfig | 1 +
> drivers/net/wireless/Makefile | 3 +-
> drivers/net/wireless/iwlwifi/Kconfig | 124 +-
> drivers/net/wireless/iwlwifi/Makefile | 39 +-
> drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 ---
> drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 -
> drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 -
> drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 --
> drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 -
> drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 -
> drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------
> drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 ---------------
> drivers/net/wireless/iwlwifi/iwl-3945.h | 308 --
> drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 -----
> drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 --------------
> drivers/net/wireless/iwlwifi/iwl-agn.c | 35 +-
> drivers/net/wireless/iwlwifi/iwl-core.c | 76 +-
> drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 -
> drivers/net/wireless/iwlwifi/iwl-dev.h | 13 +-
> drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 -
> drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 -
> drivers/net/wireless/iwlwifi/iwl-led.c | 2 -
> drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ----
> drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 -
> drivers/net/wireless/iwlwifi/iwl-power.c | 3 -
> drivers/net/wireless/iwlwifi/iwl-rx.c | 6 -
> drivers/net/wireless/iwlwifi/iwl-scan.c | 10 -
> drivers/net/wireless/iwlwifi/iwl-sta.c | 11 -
> drivers/net/wireless/iwlwifi/iwl-tx.c | 7 -
> drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 -----------------------
> 30 files changed, 106 insertions(+), 14049 deletions(-)
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h
> delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c
>
If device has serious problem and cause firmware can not recover itself.
Keep reloading firmware will not help, it can only fill up the syslog and
lock up the system because busy reloading.
Introduce the limit reload counter, if the reload reach the maximum within
the pre-defined duration;stop the reload operation.
Signed-off-by: Wey-Yi Guy <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-core.c | 22 ++++++++++++++++++++++
drivers/net/wireless/iwlwifi/iwl-dev.h | 9 +++++++++
2 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4ad8938..977ddfb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -948,6 +948,9 @@ EXPORT_SYMBOL(iwl_print_rx_config_cmd);
*/
void iwl_irq_handle_error(struct iwl_priv *priv)
{
+ unsigned int reload_msec;
+ unsigned long reload_jiffies;
+
/* Set the FW error flag -- cleared on iwl_down */
set_bit(STATUS_FW_ERROR, &priv->status);
@@ -991,6 +994,25 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
* commands by clearing the INIT status bit */
clear_bit(STATUS_READY, &priv->status);
+ /*
+ * If firmware keep reloading, then it indicate something
+ * serious wrong and firmware having problem to recover
+ * from it. Instead of keep trying which will fill the syslog
+ * and hang the system, let's just stop it
+ */
+ reload_jiffies = jiffies;
+ reload_msec = jiffies_to_msecs((long) reload_jiffies -
+ (long) priv->reload_jiffies);
+ priv->reload_jiffies = reload_jiffies;
+ if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
+ priv->reload_count++;
+ if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
+ IWL_ERR(priv, "BUG_ON, Stop restarting\n");
+ return;
+ }
+ } else
+ priv->reload_count = 0;
+
if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
"Restarting adapter due to uCode error.\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ecfbef4..065615e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -1110,6 +1110,11 @@ struct iwl_event_log {
/* BT Antenna Coupling Threshold (dB) */
#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35)
+/* Firmware reload counter and Timestamp */
+#define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */
+#define IWL_MAX_CONTINUE_RELOAD_CNT 4
+
+
enum iwl_reset {
IWL_RF_RESET = 0,
IWL_FW_RESET,
@@ -1262,6 +1267,10 @@ struct iwl_priv {
/* force reset */
struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
+ /* firmware reload counter and timestamp */
+ unsigned long reload_jiffies;
+ int reload_count;
+
/* we allocate array of iwl_channel_info for NIC's valid channels.
* Access via channel # using indirect index array */
struct iwl_channel_info *channel_info; /* channel info array */
--
1.7.0.4
OK... :-)
On Mon, Feb 21, 2011 at 11:09:35AM -0800, Guy, Wey-Yi wrote:
> John,
>
> Please drop this series of patches, I will resubmit
>
> Thanks
>
> Wey
>
> On Mon, 2011-02-21 at 11:06 -0800, Guy, Wey-Yi W wrote:
> > We splite legacy(3945/4965) from iwlwifi into separated directory(iwlegacy)
> > We also fix few firmware related problems
> >
> > Wey-Yi Guy (3):
> > iwlwifi: Limit number of firmware reload
> > iwlwifi: Loading correct uCode again when fail to load
> > iwlwifi: enable 2-wire bt coex support for non-combo device
> >
> > Meenakshi Venkataraman (1):
> > iwlwifi: split the drivers for agn and legacy devices 3945/4965
> >
> > these patches are also available from wireless-next-2.6 branch on
> > git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
> >
> > drivers/net/wireless/Kconfig | 1 +
> > drivers/net/wireless/Makefile | 3 +-
> > drivers/net/wireless/iwlwifi/Kconfig | 124 +-
> > drivers/net/wireless/iwlwifi/Makefile | 39 +-
> > drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 ---
> > drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 -
> > drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 -
> > drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 --
> > drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 -
> > drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 -
> > drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------
> > drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 ---------------
> > drivers/net/wireless/iwlwifi/iwl-3945.h | 308 --
> > drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 -----
> > drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 --------------
> > drivers/net/wireless/iwlwifi/iwl-agn.c | 35 +-
> > drivers/net/wireless/iwlwifi/iwl-core.c | 76 +-
> > drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 -
> > drivers/net/wireless/iwlwifi/iwl-dev.h | 13 +-
> > drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 -
> > drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 -
> > drivers/net/wireless/iwlwifi/iwl-led.c | 2 -
> > drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ----
> > drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 -
> > drivers/net/wireless/iwlwifi/iwl-power.c | 3 -
> > drivers/net/wireless/iwlwifi/iwl-rx.c | 6 -
> > drivers/net/wireless/iwlwifi/iwl-scan.c | 10 -
> > drivers/net/wireless/iwlwifi/iwl-sta.c | 11 -
> > drivers/net/wireless/iwlwifi/iwl-tx.c | 7 -
> > drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 -----------------------
> > 30 files changed, 106 insertions(+), 14049 deletions(-)
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h
> > delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c
> >
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.
For non-combo devices, 2-wire BT coex is needed to make sure BT coex
still function with external BT devices
Signed-off-by: Wey-Yi Guy <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 8 +++++---
1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c04d991..9965215 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2744,9 +2744,11 @@ static void iwl_alive_start(struct iwl_priv *priv)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
- if (priv->cfg->bt_params &&
- !priv->cfg->bt_params->advanced_bt_coexist) {
- /* Configure Bluetooth device coexistence support */
+ if (!priv->cfg->bt_params || (priv->cfg->bt_params &&
+ !priv->cfg->bt_params->advanced_bt_coexist)) {
+ /*
+ * default is 2-wire BT coexexistence support
+ */
priv->cfg->ops->hcmd->send_bt_config(priv);
}
--
1.7.0.4
From: Meenakshi Venkataraman <[email protected]>
Intel WiFi devices 3945 and 4965 now have their own driver in the folder
drivers/net/wireless/iwlegacy
Add support to build these drivers independently of the driver for
AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko,
and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko
contains code shared between both devices.
The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3
ABGN device.
Signed-off-by: Meenakshi Venkataraman <[email protected]>
Acked-by: Johannes Berg <[email protected]>
Signed-off-by: Wey-Yi Guy <[email protected]>
---
drivers/net/wireless/Kconfig | 1 +
drivers/net/wireless/Makefile | 3 +-
drivers/net/wireless/iwlwifi/Kconfig | 124 +-
drivers/net/wireless/iwlwifi/Makefile | 39 +-
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c | 522 ---
drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 -
drivers/net/wireless/iwlwifi/iwl-3945-fh.h | 188 -
drivers/net/wireless/iwlwifi/iwl-3945-hw.h | 294 --
drivers/net/wireless/iwlwifi/iwl-3945-led.c | 64 -
drivers/net/wireless/iwlwifi/iwl-3945-led.h | 32 -
drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 995 ------
drivers/net/wireless/iwlwifi/iwl-3945.c | 2819 ---------------
drivers/net/wireless/iwlwifi/iwl-3945.h | 308 --
drivers/net/wireless/iwlwifi/iwl-4965-hw.h | 792 -----
drivers/net/wireless/iwlwifi/iwl-4965.c | 2666 --------------
drivers/net/wireless/iwlwifi/iwl-agn.c | 18 -
drivers/net/wireless/iwlwifi/iwl-core.c | 54 -
drivers/net/wireless/iwlwifi/iwl-debugfs.c | 2 -
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-eeprom.c | 8 -
drivers/net/wireless/iwlwifi/iwl-hcmd.c | 5 -
drivers/net/wireless/iwlwifi/iwl-led.c | 2 -
drivers/net/wireless/iwlwifi/iwl-legacy.c | 657 ----
drivers/net/wireless/iwlwifi/iwl-legacy.h | 79 -
drivers/net/wireless/iwlwifi/iwl-power.c | 3 -
drivers/net/wireless/iwlwifi/iwl-rx.c | 6 -
drivers/net/wireless/iwlwifi/iwl-scan.c | 10 -
drivers/net/wireless/iwlwifi/iwl-sta.c | 11 -
drivers/net/wireless/iwlwifi/iwl-tx.c | 7 -
drivers/net/wireless/iwlwifi/iwl3945-base.c | 4334 -----------------------
30 files changed, 61 insertions(+), 14046 deletions(-)
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-fh.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-led.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-rs.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-3945.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965-hw.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-4965.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.c
delete mode 100644 drivers/net/wireless/iwlwifi/iwl-legacy.h
delete mode 100644 drivers/net/wireless/iwlwifi/iwl3945-base.c
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index b4338f3..7aeb113 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -274,6 +274,7 @@ source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/iwlegacy/Kconfig"
source "drivers/net/wireless/iwmc3200wifi/Kconfig"
source "drivers/net/wireless/libertas/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 9760561..cd0c7e2 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -41,7 +41,8 @@ obj-$(CONFIG_ADM8211) += adm8211.o
obj-$(CONFIG_MWL8K) += mwl8k.o
-obj-$(CONFIG_IWLWIFI) += iwlwifi/
+obj-$(CONFIG_IWLAGN) += iwlwifi/
+obj-$(CONFIG_IWLWIFI_LEGACY) += iwlegacy/
obj-$(CONFIG_RT2X00) += rt2x00/
obj-$(CONFIG_P54_COMMON) += p54/
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index e1e3b1c..17d555f 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,18 +1,52 @@
-config IWLWIFI
- tristate "Intel Wireless Wifi"
+config IWLAGN
+ tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlagn) "
depends on PCI && MAC80211
select FW_LOADER
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGERS
select MAC80211_LEDS
+ ---help---
+ Select to build the driver supporting the:
+
+ Intel Wireless WiFi Link Next-Gen AGN
+
+ This option enables support for use with the following hardware:
+ Intel Wireless WiFi Link 6250AGN Adapter
+ Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+ Intel WiFi Link 1000BGN
+ Intel Wireless WiFi 5150AGN
+ Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+ Intel 6005 Series Wi-Fi Adapters
+ Intel 6030 Series Wi-Fi Adapters
+ Intel Wireless WiFi Link 6150BGN 2 Adapter
+ Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+ Intel 2000 Series Wi-Fi Adapters
+
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ In order to use this driver, you will need a microcode (uCode)
+ image for it. You can obtain the microcode from:
+
+ <http://intellinuxwireless.org/>.
+
+ The microcode is typically installed in /lib/firmware. You can
+ look in the hotplug script /etc/hotplug/firmware.agent to
+ determine which directory FIRMWARE_DIR is set to when the script
+ runs.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwlagn.
menu "Debugging Options"
- depends on IWLWIFI
+ depends on IWLAGN
config IWLWIFI_DEBUG
- bool "Enable full debugging output in iwlagn and iwl3945 drivers"
- depends on IWLWIFI
+ bool "Enable full debugging output in the iwlagn driver"
+ depends on IWLAGN
---help---
This option will enable debug tracing output for the iwlwifi drivers
@@ -37,7 +71,7 @@ config IWLWIFI_DEBUG
config IWLWIFI_DEBUGFS
bool "iwlagn debugfs support"
- depends on IWLWIFI && MAC80211_DEBUGFS
+ depends on IWLAGN && MAC80211_DEBUGFS
---help---
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
@@ -45,13 +79,13 @@ config IWLWIFI_DEBUGFS
config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
bool "Experimental uCode support"
- depends on IWLWIFI && IWLWIFI_DEBUG
+ depends on IWLAGN && IWLWIFI_DEBUG
---help---
Enable use of experimental ucode for testing and debugging.
config IWLWIFI_DEVICE_TRACING
bool "iwlwifi device access tracing"
- depends on IWLWIFI
+ depends on IWLAGN
depends on EVENT_TRACING
help
Say Y here to trace all commands, including TX frames and IO
@@ -68,57 +102,9 @@ config IWLWIFI_DEVICE_TRACING
occur.
endmenu
-config IWLAGN
- tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel Wireless WiFi Link Next-Gen AGN
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
-
- <http://intellinuxwireless.org/>.
-
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwlagn.
-
-
-config IWL4965
- bool "Intel Wireless WiFi 4965AGN"
- depends on IWLAGN
- ---help---
- This option enables support for Intel Wireless WiFi Link 4965AGN
-
-config IWL5000
- bool "Intel Wireless-N/Advanced-N/Ultimate-N WiFi Link"
- depends on IWLAGN
- ---help---
- This option enables support for use with the following hardware:
- Intel Wireless WiFi Link 6250AGN Adapter
- Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
- Intel WiFi Link 1000BGN
- Intel Wireless WiFi 5150AGN
- Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
- Intel 6005 Series Wi-Fi Adapters
- Intel 6030 Series Wi-Fi Adapters
- Intel Wireless WiFi Link 6150BGN 2 Adapter
- Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
- Intel 2000 Series Wi-Fi Adapters
-
config IWL_P2P
bool "iwlwifi experimental P2P support"
- depends on IWL5000
+ depends on IWLAGN
help
This option enables experimental P2P support for some devices
based on microcode support. Since P2P support is still under
@@ -132,27 +118,3 @@ config IWL_P2P
Say Y only if you want to experiment with P2P.
-config IWL3945
- tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
- depends on IWLWIFI
- ---help---
- Select to build the driver supporting the:
-
- Intel PRO/Wireless 3945ABG/BG Network Connection
-
- This driver uses the kernel's mac80211 subsystem.
-
- In order to use this driver, you will need a microcode (uCode)
- image for it. You can obtain the microcode from:
-
- <http://intellinuxwireless.org/>.
-
- The microcode is typically installed in /lib/firmware. You can
- look in the hotplug script /etc/hotplug/firmware.agent to
- determine which directory FIRMWARE_DIR is set to when the script
- runs.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>. The
- module will be called iwl3945.
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 25be742..aab7d15 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,36 +1,23 @@
-obj-$(CONFIG_IWLWIFI) += iwlcore.o
-iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
-iwlcore-objs += iwl-rx.o iwl-tx.o iwl-sta.o
-iwlcore-objs += iwl-scan.o iwl-led.o
-iwlcore-$(CONFIG_IWL3945) += iwl-legacy.o
-iwlcore-$(CONFIG_IWL4965) += iwl-legacy.o
-iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-
-# If 3945 is selected only, iwl-legacy.o will be added
-# to iwlcore-m above, but it needs to be built in.
-iwlcore-objs += $(iwlcore-m)
-
-CFLAGS_iwl-devtrace.o := -I$(src)
-
# AGN
obj-$(CONFIG_IWLAGN) += iwlagn.o
iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
iwlagn-objs += iwl-agn-ucode.o iwl-agn-tx.o
iwlagn-objs += iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o
iwlagn-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o
-iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
-iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
-iwlagn-$(CONFIG_IWL5000) += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
-iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-2000.o
+iwlagn-objs += iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
+iwlagn-objs += iwl-rx.o iwl-tx.o iwl-sta.o
+iwlagn-objs += iwl-scan.o iwl-led.o
+iwlagn-objs += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
+iwlagn-objs += iwl-5000.o
+iwlagn-objs += iwl-6000.o
+iwlagn-objs += iwl-1000.o
+iwlagn-objs += iwl-2000.o
+
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-# 3945
-obj-$(CONFIG_IWL3945) += iwl3945.o
-iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
-iwl3945-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-3945-debugfs.o
+CFLAGS_iwl-devtrace.o := -I$(src)
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
deleted file mode 100644
index ef0835b..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-3945-debugfs.h"
-
-
-static int iwl3945_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
-{
- int p = 0;
-
- p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n",
- le32_to_cpu(priv->_3945.statistics.flag));
- if (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_CLEAR_MSK)
- p += scnprintf(buf + p, bufsz - p,
- "\tStatistics have been cleared\n");
- p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
- (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_FREQUENCY_MSK)
- ? "2.4 GHz" : "5.2 GHz");
- p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
- (le32_to_cpu(priv->_3945.statistics.flag) &
- UCODE_STATISTICS_NARROW_BAND_MSK)
- ? "enabled" : "disabled");
- return p;
-}
-
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct iwl39_statistics_rx_phy) * 40 +
- sizeof(struct iwl39_statistics_rx_non_phy) * 40 + 400;
- ssize_t ret;
- struct iwl39_statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
- struct iwl39_statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
- struct iwl39_statistics_rx_non_phy *general, *accum_general;
- struct iwl39_statistics_rx_non_phy *delta_general, *max_general;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- ofdm = &priv->_3945.statistics.rx.ofdm;
- cck = &priv->_3945.statistics.rx.cck;
- general = &priv->_3945.statistics.rx.general;
- accum_ofdm = &priv->_3945.accum_statistics.rx.ofdm;
- accum_cck = &priv->_3945.accum_statistics.rx.cck;
- accum_general = &priv->_3945.accum_statistics.rx.general;
- delta_ofdm = &priv->_3945.delta_statistics.rx.ofdm;
- delta_cck = &priv->_3945.delta_statistics.rx.cck;
- delta_general = &priv->_3945.delta_statistics.rx.general;
- max_ofdm = &priv->_3945.max_delta.rx.ofdm;
- max_cck = &priv->_3945.max_delta.rx.cck;
- max_general = &priv->_3945.max_delta.rx.general;
-
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - OFDM:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ina_cnt:", le32_to_cpu(ofdm->ina_cnt),
- accum_ofdm->ina_cnt,
- delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_cnt:",
- le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
- delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "plcp_err:",
- le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
- delta_ofdm->plcp_err, max_ofdm->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "crc32_err:",
- le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
- delta_ofdm->crc32_err, max_ofdm->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "overrun_err:",
- le32_to_cpu(ofdm->overrun_err),
- accum_ofdm->overrun_err, delta_ofdm->overrun_err,
- max_ofdm->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "early_overrun_err:",
- le32_to_cpu(ofdm->early_overrun_err),
- accum_ofdm->early_overrun_err,
- delta_ofdm->early_overrun_err,
- max_ofdm->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_good:", le32_to_cpu(ofdm->crc32_good),
- accum_ofdm->crc32_good, delta_ofdm->crc32_good,
- max_ofdm->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n", "false_alarm_cnt:",
- le32_to_cpu(ofdm->false_alarm_cnt),
- accum_ofdm->false_alarm_cnt,
- delta_ofdm->false_alarm_cnt,
- max_ofdm->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_sync_err_cnt:",
- le32_to_cpu(ofdm->fina_sync_err_cnt),
- accum_ofdm->fina_sync_err_cnt,
- delta_ofdm->fina_sync_err_cnt,
- max_ofdm->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sfd_timeout:",
- le32_to_cpu(ofdm->sfd_timeout),
- accum_ofdm->sfd_timeout,
- delta_ofdm->sfd_timeout,
- max_ofdm->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_timeout:",
- le32_to_cpu(ofdm->fina_timeout),
- accum_ofdm->fina_timeout,
- delta_ofdm->fina_timeout,
- max_ofdm->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "unresponded_rts:",
- le32_to_cpu(ofdm->unresponded_rts),
- accum_ofdm->unresponded_rts,
- delta_ofdm->unresponded_rts,
- max_ofdm->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rxe_frame_lmt_ovrun:",
- le32_to_cpu(ofdm->rxe_frame_limit_overrun),
- accum_ofdm->rxe_frame_limit_overrun,
- delta_ofdm->rxe_frame_limit_overrun,
- max_ofdm->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_ack_cnt:",
- le32_to_cpu(ofdm->sent_ack_cnt),
- accum_ofdm->sent_ack_cnt,
- delta_ofdm->sent_ack_cnt,
- max_ofdm->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_cts_cnt:",
- le32_to_cpu(ofdm->sent_cts_cnt),
- accum_ofdm->sent_cts_cnt,
- delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt);
-
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - CCK:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ina_cnt:",
- le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
- delta_cck->ina_cnt, max_cck->ina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_cnt:",
- le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
- delta_cck->fina_cnt, max_cck->fina_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "plcp_err:",
- le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
- delta_cck->plcp_err, max_cck->plcp_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_err:",
- le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
- delta_cck->crc32_err, max_cck->crc32_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "overrun_err:",
- le32_to_cpu(cck->overrun_err),
- accum_cck->overrun_err,
- delta_cck->overrun_err, max_cck->overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "early_overrun_err:",
- le32_to_cpu(cck->early_overrun_err),
- accum_cck->early_overrun_err,
- delta_cck->early_overrun_err,
- max_cck->early_overrun_err);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "crc32_good:",
- le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
- delta_cck->crc32_good,
- max_cck->crc32_good);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "false_alarm_cnt:",
- le32_to_cpu(cck->false_alarm_cnt),
- accum_cck->false_alarm_cnt,
- delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_sync_err_cnt:",
- le32_to_cpu(cck->fina_sync_err_cnt),
- accum_cck->fina_sync_err_cnt,
- delta_cck->fina_sync_err_cnt,
- max_cck->fina_sync_err_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sfd_timeout:",
- le32_to_cpu(cck->sfd_timeout),
- accum_cck->sfd_timeout,
- delta_cck->sfd_timeout, max_cck->sfd_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "fina_timeout:",
- le32_to_cpu(cck->fina_timeout),
- accum_cck->fina_timeout,
- delta_cck->fina_timeout, max_cck->fina_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "unresponded_rts:",
- le32_to_cpu(cck->unresponded_rts),
- accum_cck->unresponded_rts,
- delta_cck->unresponded_rts,
- max_cck->unresponded_rts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rxe_frame_lmt_ovrun:",
- le32_to_cpu(cck->rxe_frame_limit_overrun),
- accum_cck->rxe_frame_limit_overrun,
- delta_cck->rxe_frame_limit_overrun,
- max_cck->rxe_frame_limit_overrun);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_ack_cnt:",
- le32_to_cpu(cck->sent_ack_cnt),
- accum_cck->sent_ack_cnt,
- delta_cck->sent_ack_cnt,
- max_cck->sent_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sent_cts_cnt:",
- le32_to_cpu(cck->sent_cts_cnt),
- accum_cck->sent_cts_cnt,
- delta_cck->sent_cts_cnt,
- max_cck->sent_cts_cnt);
-
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Rx - GENERAL:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bogus_cts:",
- le32_to_cpu(general->bogus_cts),
- accum_general->bogus_cts,
- delta_general->bogus_cts, max_general->bogus_cts);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bogus_ack:",
- le32_to_cpu(general->bogus_ack),
- accum_general->bogus_ack,
- delta_general->bogus_ack, max_general->bogus_ack);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "non_bssid_frames:",
- le32_to_cpu(general->non_bssid_frames),
- accum_general->non_bssid_frames,
- delta_general->non_bssid_frames,
- max_general->non_bssid_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "filtered_frames:",
- le32_to_cpu(general->filtered_frames),
- accum_general->filtered_frames,
- delta_general->filtered_frames,
- max_general->filtered_frames);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "non_channel_beacons:",
- le32_to_cpu(general->non_channel_beacons),
- accum_general->non_channel_beacons,
- delta_general->non_channel_beacons,
- max_general->non_channel_beacons);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = (sizeof(struct iwl39_statistics_tx) * 48) + 250;
- ssize_t ret;
- struct iwl39_statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- tx = &priv->_3945.statistics.tx;
- accum_tx = &priv->_3945.accum_statistics.tx;
- delta_tx = &priv->_3945.delta_statistics.tx;
- max_tx = &priv->_3945.max_delta.tx;
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_Tx:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "preamble:",
- le32_to_cpu(tx->preamble_cnt),
- accum_tx->preamble_cnt,
- delta_tx->preamble_cnt, max_tx->preamble_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "rx_detected_cnt:",
- le32_to_cpu(tx->rx_detected_cnt),
- accum_tx->rx_detected_cnt,
- delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bt_prio_defer_cnt:",
- le32_to_cpu(tx->bt_prio_defer_cnt),
- accum_tx->bt_prio_defer_cnt,
- delta_tx->bt_prio_defer_cnt,
- max_tx->bt_prio_defer_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "bt_prio_kill_cnt:",
- le32_to_cpu(tx->bt_prio_kill_cnt),
- accum_tx->bt_prio_kill_cnt,
- delta_tx->bt_prio_kill_cnt,
- max_tx->bt_prio_kill_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "few_bytes_cnt:",
- le32_to_cpu(tx->few_bytes_cnt),
- accum_tx->few_bytes_cnt,
- delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "cts_timeout:",
- le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
- delta_tx->cts_timeout, max_tx->cts_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "ack_timeout:",
- le32_to_cpu(tx->ack_timeout),
- accum_tx->ack_timeout,
- delta_tx->ack_timeout, max_tx->ack_timeout);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "expected_ack_cnt:",
- le32_to_cpu(tx->expected_ack_cnt),
- accum_tx->expected_ack_cnt,
- delta_tx->expected_ack_cnt,
- max_tx->expected_ack_cnt);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "actual_ack_cnt:",
- le32_to_cpu(tx->actual_ack_cnt),
- accum_tx->actual_ack_cnt,
- delta_tx->actual_ack_cnt,
- max_tx->actual_ack_cnt);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
-
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct iwl_priv *priv = file->private_data;
- int pos = 0;
- char *buf;
- int bufsz = sizeof(struct iwl39_statistics_general) * 10 + 300;
- ssize_t ret;
- struct iwl39_statistics_general *general, *accum_general;
- struct iwl39_statistics_general *delta_general, *max_general;
- struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
- struct iwl39_statistics_div *div, *accum_div, *delta_div, *max_div;
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- buf = kzalloc(bufsz, GFP_KERNEL);
- if (!buf) {
- IWL_ERR(priv, "Can not allocate Buffer\n");
- return -ENOMEM;
- }
-
- /*
- * The statistic information display here is based on
- * the last statistics notification from uCode
- * might not reflect the current uCode activity
- */
- general = &priv->_3945.statistics.general;
- dbg = &priv->_3945.statistics.general.dbg;
- div = &priv->_3945.statistics.general.div;
- accum_general = &priv->_3945.accum_statistics.general;
- delta_general = &priv->_3945.delta_statistics.general;
- max_general = &priv->_3945.max_delta.general;
- accum_dbg = &priv->_3945.accum_statistics.general.dbg;
- delta_dbg = &priv->_3945.delta_statistics.general.dbg;
- max_dbg = &priv->_3945.max_delta.general.dbg;
- accum_div = &priv->_3945.accum_statistics.general.div;
- delta_div = &priv->_3945.delta_statistics.general.div;
- max_div = &priv->_3945.max_delta.general.div;
- pos += iwl3945_statistics_flag(priv, buf, bufsz);
- pos += scnprintf(buf + pos, bufsz - pos, "%-32s current"
- "acumulative delta max\n",
- "Statistics_General:");
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "burst_check:",
- le32_to_cpu(dbg->burst_check),
- accum_dbg->burst_check,
- delta_dbg->burst_check, max_dbg->burst_check);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "burst_count:",
- le32_to_cpu(dbg->burst_count),
- accum_dbg->burst_count,
- delta_dbg->burst_count, max_dbg->burst_count);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "sleep_time:",
- le32_to_cpu(general->sleep_time),
- accum_general->sleep_time,
- delta_general->sleep_time, max_general->sleep_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "slots_out:",
- le32_to_cpu(general->slots_out),
- accum_general->slots_out,
- delta_general->slots_out, max_general->slots_out);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "slots_idle:",
- le32_to_cpu(general->slots_idle),
- accum_general->slots_idle,
- delta_general->slots_idle, max_general->slots_idle);
- pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
- le32_to_cpu(general->ttl_timestamp));
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "tx_on_a:",
- le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
- delta_div->tx_on_a, max_div->tx_on_a);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "tx_on_b:",
- le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
- delta_div->tx_on_b, max_div->tx_on_b);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "exec_time:",
- le32_to_cpu(div->exec_time), accum_div->exec_time,
- delta_div->exec_time, max_div->exec_time);
- pos += scnprintf(buf + pos, bufsz - pos,
- " %-30s %10u %10u %10u %10u\n",
- "probe_time:",
- le32_to_cpu(div->probe_time), accum_div->probe_time,
- delta_div->probe_time, max_div->probe_time);
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
- kfree(buf);
- return ret;
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
deleted file mode 100644
index 70809c5..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-debug.h"
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos);
-#else
-static ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
- char __user *user_buf, size_t count,
- loff_t *ppos)
-{
- return 0;
-}
-static ssize_t iwl3945_ucode_general_stats_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
deleted file mode 100644
index 2c9ed2b..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_3945_fh_h__
-#define __iwl_3945_fh_h__
-
-/************************************/
-/* iwl3945 Flow Handler Definitions */
-/************************************/
-
-/**
- * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
- * Addresses are offsets from device's PCI hardware base address.
- */
-#define FH39_MEM_LOWER_BOUND (0x0800)
-#define FH39_MEM_UPPER_BOUND (0x1000)
-
-#define FH39_CBCC_TABLE (FH39_MEM_LOWER_BOUND + 0x140)
-#define FH39_TFDB_TABLE (FH39_MEM_LOWER_BOUND + 0x180)
-#define FH39_RCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x400)
-#define FH39_RSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x4c0)
-#define FH39_TCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x500)
-#define FH39_TSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x680)
-
-/* TFDB (Transmit Frame Buffer Descriptor) */
-#define FH39_TFDB(_ch, buf) (FH39_TFDB_TABLE + \
- ((_ch) * 2 + (buf)) * 0x28)
-#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TABLE + 0x50 * (_ch))
-
-/* CBCC channel is [0,2] */
-#define FH39_CBCC(_ch) (FH39_CBCC_TABLE + (_ch) * 0x8)
-#define FH39_CBCC_CTRL(_ch) (FH39_CBCC(_ch) + 0x00)
-#define FH39_CBCC_BASE(_ch) (FH39_CBCC(_ch) + 0x04)
-
-/* RCSR channel is [0,2] */
-#define FH39_RCSR(_ch) (FH39_RCSR_TABLE + (_ch) * 0x40)
-#define FH39_RCSR_CONFIG(_ch) (FH39_RCSR(_ch) + 0x00)
-#define FH39_RCSR_RBD_BASE(_ch) (FH39_RCSR(_ch) + 0x04)
-#define FH39_RCSR_WPTR(_ch) (FH39_RCSR(_ch) + 0x20)
-#define FH39_RCSR_RPTR_ADDR(_ch) (FH39_RCSR(_ch) + 0x24)
-
-#define FH39_RSCSR_CHNL0_WPTR (FH39_RCSR_WPTR(0))
-
-/* RSSR */
-#define FH39_RSSR_CTRL (FH39_RSSR_TABLE + 0x000)
-#define FH39_RSSR_STATUS (FH39_RSSR_TABLE + 0x004)
-
-/* TCSR */
-#define FH39_TCSR(_ch) (FH39_TCSR_TABLE + (_ch) * 0x20)
-#define FH39_TCSR_CONFIG(_ch) (FH39_TCSR(_ch) + 0x00)
-#define FH39_TCSR_CREDIT(_ch) (FH39_TCSR(_ch) + 0x04)
-#define FH39_TCSR_BUFF_STTS(_ch) (FH39_TCSR(_ch) + 0x08)
-
-/* TSSR */
-#define FH39_TSSR_CBB_BASE (FH39_TSSR_TABLE + 0x000)
-#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TABLE + 0x008)
-#define FH39_TSSR_TX_STATUS (FH39_TSSR_TABLE + 0x010)
-
-
-/* DBM */
-
-#define FH39_SRVC_CHNL (6)
-
-#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE (20)
-#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH (4)
-
-#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN (0x08000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE (0x80000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE (0x20000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 (0x01000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST (0x00001000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH (0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER (0x00000001)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL (0x00000008)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00004000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR (0x00000001)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON (0xFF000000)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON (0x00FF0000)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B (0x00000400)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON (0x00000100)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON (0x00000080)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH (0x00000020)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH (0x00000005)
-
-#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) (BIT(_ch) << 24)
-#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch) (BIT(_ch) << 16)
-
-#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \
- (FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \
- FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch))
-
-#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
-
-struct iwl3945_tfd_tb {
- __le32 addr;
- __le32 len;
-} __packed;
-
-struct iwl3945_tfd {
- __le32 control_flags;
- struct iwl3945_tfd_tb tbs[4];
- u8 __pad[28];
-} __packed;
-
-
-#endif /* __iwl_3945_fh_h__ */
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
deleted file mode 100644
index 65b5834..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
- * Please use iwl-commands.h for uCode API definitions.
- * Please use iwl-3945.h for driver implementation definitions.
- */
-
-#ifndef __iwl_3945_hw__
-#define __iwl_3945_hw__
-
-#include "iwl-eeprom.h"
-
-/* RSSI to dBm */
-#define IWL39_RSSI_OFFSET 95
-
-#define IWL_DEFAULT_TX_POWER 0x0F
-
-/*
- * EEPROM related constants, enums, and structures.
- */
-#define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7)
-
-/*
- * Mapping of a Tx power level, at factory calibration temperature,
- * to a radio/DSP gain table index.
- * One for each of 5 "sample" power levels in each band.
- * v_det is measured at the factory, using the 3945's built-in power amplifier
- * (PA) output voltage detector. This same detector is used during Tx of
- * long packets in normal operation to provide feedback as to proper output
- * level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_sample {
- u8 gain_index; /* index into power (gain) setup table ... */
- s8 power; /* ... for this pwr level for this chnl group */
- u16 v_det; /* PA output voltage */
-} __packed;
-
-/*
- * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
- * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
- * Tx power setup code interpolates between the 5 "sample" power levels
- * to determine the nominal setup for a requested power level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_group {
- struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */
- s32 a, b, c, d, e; /* coefficients for voltage->power
- * formula (signed) */
- s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on
- * frequency (signed) */
- s8 saturation_power; /* highest power possible by h/w in this
- * band */
- u8 group_channel; /* "representative" channel # in this band */
- s16 temperature; /* h/w temperature at factory calib this band
- * (signed) */
-} __packed;
-
-/*
- * Temperature-based Tx-power compensation data, not band-specific.
- * These coefficients are use to modify a/b/c/d/e coeffs based on
- * difference between current temperature and factory calib temperature.
- * Data copied from EEPROM.
- */
-struct iwl3945_eeprom_temperature_corr {
- u32 Ta;
- u32 Tb;
- u32 Tc;
- u32 Td;
- u32 Te;
-} __packed;
-
-/*
- * EEPROM map
- */
-struct iwl3945_eeprom {
- u8 reserved0[16];
- u16 device_id; /* abs.ofs: 16 */
- u8 reserved1[2];
- u16 pmc; /* abs.ofs: 20 */
- u8 reserved2[20];
- u8 mac_address[6]; /* abs.ofs: 42 */
- u8 reserved3[58];
- u16 board_revision; /* abs.ofs: 106 */
- u8 reserved4[11];
- u8 board_pba_number[9]; /* abs.ofs: 119 */
- u8 reserved5[8];
- u16 version; /* abs.ofs: 136 */
- u8 sku_cap; /* abs.ofs: 138 */
- u8 leds_mode; /* abs.ofs: 139 */
- u16 oem_mode;
- u16 wowlan_mode; /* abs.ofs: 142 */
- u16 leds_time_interval; /* abs.ofs: 144 */
- u8 leds_off_time; /* abs.ofs: 146 */
- u8 leds_on_time; /* abs.ofs: 147 */
- u8 almgor_m_version; /* abs.ofs: 148 */
- u8 antenna_switch_type; /* abs.ofs: 149 */
- u8 reserved6[42];
- u8 sku_id[4]; /* abs.ofs: 192 */
-
-/*
- * Per-channel regulatory data.
- *
- * Each channel that *might* be supported by 3945 or 4965 has a fixed location
- * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
- * txpower (MSB).
- *
- * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz)
- * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
- *
- * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
- */
- u16 band_1_count; /* abs.ofs: 196 */
- struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 198 */
-
-/*
- * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
- * 5.0 GHz channels 7, 8, 11, 12, 16
- * (4915-5080MHz) (none of these is ever supported)
- */
- u16 band_2_count; /* abs.ofs: 226 */
- struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */
-
-/*
- * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
- * (5170-5320MHz)
- */
- u16 band_3_count; /* abs.ofs: 254 */
- struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */
-
-/*
- * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
- * (5500-5700MHz)
- */
- u16 band_4_count; /* abs.ofs: 280 */
- struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */
-
-/*
- * 5.7 GHz channels 145, 149, 153, 157, 161, 165
- * (5725-5825MHz)
- */
- u16 band_5_count; /* abs.ofs: 304 */
- struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */
-
- u8 reserved9[194];
-
-/*
- * 3945 Txpower calibration data.
- */
-#define IWL_NUM_TX_CALIB_GROUPS 5
- struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS];
-/* abs.ofs: 512 */
- struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */
- u8 reserved16[172]; /* fill out to full 1024 byte block */
-} __packed;
-
-#define IWL3945_EEPROM_IMG_SIZE 1024
-
-/* End of EEPROM */
-
-#define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */
-#define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */
-
-/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
-#define IWL39_NUM_QUEUES 5
-#define IWL39_CMD_QUEUE_NUM 4
-
-#define IWL_DEFAULT_TX_RETRY 15
-
-/*********************************************/
-
-#define RFD_SIZE 4
-#define NUM_TFD_CHUNKS 4
-
-#define RX_QUEUE_SIZE 256
-#define RX_QUEUE_MASK 255
-#define RX_QUEUE_SIZE_LOG 8
-
-#define U32_PAD(n) ((4-(n))&0x3)
-
-#define TFD_CTL_COUNT_SET(n) (n << 24)
-#define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7)
-#define TFD_CTL_PAD_SET(n) (n << 28)
-#define TFD_CTL_PAD_GET(ctl) (ctl >> 28)
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL39_RTC_INST_LOWER_BOUND (0x000000)
-#define IWL39_RTC_INST_UPPER_BOUND (0x014000)
-
-#define IWL39_RTC_DATA_LOWER_BOUND (0x800000)
-#define IWL39_RTC_DATA_UPPER_BOUND (0x808000)
-
-#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \
- IWL39_RTC_INST_LOWER_BOUND)
-#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \
- IWL39_RTC_DATA_LOWER_BOUND)
-
-#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE
-#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
-
-static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
-{
- return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL39_RTC_DATA_UPPER_BOUND);
-}
-
-/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE
- * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */
-struct iwl3945_shared {
- __le32 tx_base_ptr[8];
-} __packed;
-
-static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags)
-{
- return le16_to_cpu(rate_n_flags) & 0xFF;
-}
-
-static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags)
-{
- return le16_to_cpu(rate_n_flags);
-}
-
-static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags)
-{
- return cpu_to_le16((u16)rate|flags);
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
deleted file mode 100644
index dc7c3a4..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-dev.h"
-#include "iwl-3945-led.h"
-
-
-/* Send led command */
-static int iwl3945_send_led_cmd(struct iwl_priv *priv,
- struct iwl_led_cmd *led_cmd)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_LEDS_CMD,
- .len = sizeof(struct iwl_led_cmd),
- .data = led_cmd,
- .flags = CMD_ASYNC,
- .callback = NULL,
- };
-
- return iwl_send_cmd(priv, &cmd);
-}
-
-const struct iwl_led_ops iwl3945_led_ops = {
- .cmd = iwl3945_send_led_cmd,
-};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
deleted file mode 100644
index ce990ad..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __iwl_3945_led_h__
-#define __iwl_3945_led_h__
-
-extern const struct iwl_led_ops iwl3945_led_ops;
-
-#endif /* __iwl_3945_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
deleted file mode 100644
index 1f3e7e3..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ /dev/null
@@ -1,995 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-sta.h"
-
-#define RS_NAME "iwl-3945-rs"
-
-static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
-};
-
-static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
-};
-
-static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = {
- 0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
-};
-
-static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = {
- 7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-struct iwl3945_tpt_entry {
- s8 min_rssi;
- u8 index;
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = {
- {-60, IWL_RATE_54M_INDEX},
- {-64, IWL_RATE_48M_INDEX},
- {-72, IWL_RATE_36M_INDEX},
- {-80, IWL_RATE_24M_INDEX},
- {-84, IWL_RATE_18M_INDEX},
- {-85, IWL_RATE_12M_INDEX},
- {-87, IWL_RATE_9M_INDEX},
- {-89, IWL_RATE_6M_INDEX}
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = {
- {-60, IWL_RATE_54M_INDEX},
- {-64, IWL_RATE_48M_INDEX},
- {-68, IWL_RATE_36M_INDEX},
- {-80, IWL_RATE_24M_INDEX},
- {-84, IWL_RATE_18M_INDEX},
- {-85, IWL_RATE_12M_INDEX},
- {-86, IWL_RATE_11M_INDEX},
- {-88, IWL_RATE_5M_INDEX},
- {-90, IWL_RATE_2M_INDEX},
- {-92, IWL_RATE_1M_INDEX}
-};
-
-#define IWL_RATE_MAX_WINDOW 62
-#define IWL_RATE_FLUSH (3*HZ)
-#define IWL_RATE_WIN_FLUSH (HZ/2)
-#define IWL39_RATE_HIGH_TH 11520
-#define IWL_SUCCESS_UP_TH 8960
-#define IWL_SUCCESS_DOWN_TH 10880
-#define IWL_RATE_MIN_FAILURE_TH 6
-#define IWL_RATE_MIN_SUCCESS_TH 8
-#define IWL_RATE_DECREASE_TH 1920
-#define IWL_RATE_RETRY_TH 15
-
-static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
-{
- u32 index = 0;
- u32 table_size = 0;
- struct iwl3945_tpt_entry *tpt_table = NULL;
-
- if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL))
- rssi = IWL_MIN_RSSI_VAL;
-
- switch (band) {
- case IEEE80211_BAND_2GHZ:
- tpt_table = iwl3945_tpt_table_g;
- table_size = ARRAY_SIZE(iwl3945_tpt_table_g);
- break;
-
- case IEEE80211_BAND_5GHZ:
- tpt_table = iwl3945_tpt_table_a;
- table_size = ARRAY_SIZE(iwl3945_tpt_table_a);
- break;
-
- default:
- BUG();
- break;
- }
-
- while ((index < table_size) && (rssi < tpt_table[index].min_rssi))
- index++;
-
- index = min(index, (table_size - 1));
-
- return tpt_table[index].index;
-}
-
-static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window)
-{
- window->data = 0;
- window->success_counter = 0;
- window->success_ratio = -1;
- window->counter = 0;
- window->average_tpt = IWL_INVALID_VALUE;
- window->stamp = 0;
-}
-
-/**
- * iwl3945_rate_scale_flush_windows - flush out the rate scale windows
- *
- * Returns the number of windows that have gathered data but were
- * not flushed. If there were any that were not flushed, then
- * reschedule the rate flushing routine.
- */
-static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta)
-{
- int unflushed = 0;
- int i;
- unsigned long flags;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- /*
- * For each rate, if we have collected data on that rate
- * and it has been more than IWL_RATE_WIN_FLUSH
- * since we flushed, clear out the gathered statistics
- */
- for (i = 0; i < IWL_RATE_COUNT_3945; i++) {
- if (!rs_sta->win[i].counter)
- continue;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
- if (time_after(jiffies, rs_sta->win[i].stamp +
- IWL_RATE_WIN_FLUSH)) {
- IWL_DEBUG_RATE(priv, "flushing %d samples of rate "
- "index %d\n",
- rs_sta->win[i].counter, i);
- iwl3945_clear_window(&rs_sta->win[i]);
- } else
- unflushed++;
- spin_unlock_irqrestore(&rs_sta->lock, flags);
- }
-
- return unflushed;
-}
-
-#define IWL_RATE_FLUSH_MAX 5000 /* msec */
-#define IWL_RATE_FLUSH_MIN 50 /* msec */
-#define IWL_AVERAGE_PACKETS 1500
-
-static void iwl3945_bg_rate_scale_flush(unsigned long data)
-{
- struct iwl3945_rs_sta *rs_sta = (void *)data;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
- int unflushed = 0;
- unsigned long flags;
- u32 packet_count, duration, pps;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- unflushed = iwl3945_rate_scale_flush_windows(rs_sta);
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /* Number of packets Rx'd since last time this timer ran */
- packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1;
-
- rs_sta->last_tx_packets = rs_sta->tx_packets + 1;
-
- if (unflushed) {
- duration =
- jiffies_to_msecs(jiffies - rs_sta->last_partial_flush);
-
- IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n",
- packet_count, duration);
-
- /* Determine packets per second */
- if (duration)
- pps = (packet_count * 1000) / duration;
- else
- pps = 0;
-
- if (pps) {
- duration = (IWL_AVERAGE_PACKETS * 1000) / pps;
- if (duration < IWL_RATE_FLUSH_MIN)
- duration = IWL_RATE_FLUSH_MIN;
- else if (duration > IWL_RATE_FLUSH_MAX)
- duration = IWL_RATE_FLUSH_MAX;
- } else
- duration = IWL_RATE_FLUSH_MAX;
-
- rs_sta->flush_time = msecs_to_jiffies(duration);
-
- IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n",
- duration, packet_count);
-
- mod_timer(&rs_sta->rate_scale_flush, jiffies +
- rs_sta->flush_time);
-
- rs_sta->last_partial_flush = jiffies;
- } else {
- rs_sta->flush_time = IWL_RATE_FLUSH;
- rs_sta->flush_pending = 0;
- }
- /* If there weren't any unflushed entries, we don't schedule the timer
- * to run again */
-
- rs_sta->last_flush = jiffies;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-/**
- * iwl3945_collect_tx_data - Update the success/failure sliding window
- *
- * We keep a sliding window of the last 64 packets transmitted
- * at this rate. window->data contains the bitmask of successful
- * packets.
- */
-static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta,
- struct iwl3945_rate_scale_data *window,
- int success, int retries, int index)
-{
- unsigned long flags;
- s32 fail_count;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- if (!retries) {
- IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n");
- return;
- }
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /*
- * Keep track of only the latest 62 tx frame attempts in this rate's
- * history window; anything older isn't really relevant any more.
- * If we have filled up the sliding window, drop the oldest attempt;
- * if the oldest attempt (highest bit in bitmap) shows "success",
- * subtract "1" from the success counter (this is the main reason
- * we keep these bitmaps!).
- * */
- while (retries > 0) {
- if (window->counter >= IWL_RATE_MAX_WINDOW) {
-
- /* remove earliest */
- window->counter = IWL_RATE_MAX_WINDOW - 1;
-
- if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) {
- window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1));
- window->success_counter--;
- }
- }
-
- /* Increment frames-attempted counter */
- window->counter++;
-
- /* Shift bitmap by one frame (throw away oldest history),
- * OR in "1", and increment "success" if this
- * frame was successful. */
- window->data <<= 1;
- if (success > 0) {
- window->success_counter++;
- window->data |= 0x1;
- success--;
- }
-
- retries--;
- }
-
- /* Calculate current success ratio, avoid divide-by-0! */
- if (window->counter > 0)
- window->success_ratio = 128 * (100 * window->success_counter)
- / window->counter;
- else
- window->success_ratio = IWL_INVALID_VALUE;
-
- fail_count = window->counter - window->success_counter;
-
- /* Calculate average throughput, if we have enough history. */
- if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
- (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
- window->average_tpt = ((window->success_ratio *
- rs_sta->expected_tpt[index] + 64) / 128);
- else
- window->average_tpt = IWL_INVALID_VALUE;
-
- /* Tag this window as having been updated */
- window->stamp = jiffies;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-}
-
-/*
- * Called after adding a new station to initialize rate scaling
- */
-void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
-{
- struct ieee80211_hw *hw = priv->hw;
- struct ieee80211_conf *conf = &priv->hw->conf;
- struct iwl3945_sta_priv *psta;
- struct iwl3945_rs_sta *rs_sta;
- struct ieee80211_supported_band *sband;
- int i;
-
- IWL_DEBUG_INFO(priv, "enter\n");
- if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
- goto out;
-
- psta = (struct iwl3945_sta_priv *) sta->drv_priv;
- rs_sta = &psta->rs_sta;
- sband = hw->wiphy->bands[conf->channel->band];
-
- rs_sta->priv = priv;
-
- rs_sta->start_rate = IWL_RATE_INVALID;
-
- /* default to just 802.11b */
- rs_sta->expected_tpt = iwl3945_expected_tpt_b;
-
- rs_sta->last_partial_flush = jiffies;
- rs_sta->last_flush = jiffies;
- rs_sta->flush_time = IWL_RATE_FLUSH;
- rs_sta->last_tx_packets = 0;
-
- rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
- rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush;
-
- for (i = 0; i < IWL_RATE_COUNT_3945; i++)
- iwl3945_clear_window(&rs_sta->win[i]);
-
- /* TODO: what is a good starting rate for STA? About middle? Maybe not
- * the lowest or the highest rate.. Could consider using RSSI from
- * previous packets? Need to have IEEE 802.1X auth succeed immediately
- * after assoc.. */
-
- for (i = sband->n_bitrates - 1; i >= 0; i--) {
- if (sta->supp_rates[sband->band] & (1 << i)) {
- rs_sta->last_txrate_idx = i;
- break;
- }
- }
-
- priv->_3945.sta_supp_rates = sta->supp_rates[sband->band];
- /* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */
- if (sband->band == IEEE80211_BAND_5GHZ) {
- rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
- priv->_3945.sta_supp_rates = priv->_3945.sta_supp_rates <<
- IWL_FIRST_OFDM_RATE;
- }
-
-out:
- priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
-
- IWL_DEBUG_INFO(priv, "leave\n");
-}
-
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
- return hw->priv;
-}
-
-/* rate scale requires free function to be implemented */
-static void rs_free(void *priv)
-{
- return;
-}
-
-static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp)
-{
- struct iwl3945_rs_sta *rs_sta;
- struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
- struct iwl_priv *priv __maybe_unused = iwl_priv;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- rs_sta = &psta->rs_sta;
-
- spin_lock_init(&rs_sta->lock);
- init_timer(&rs_sta->rate_scale_flush);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-
- return rs_sta;
-}
-
-static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta,
- void *priv_sta)
-{
- struct iwl3945_rs_sta *rs_sta = priv_sta;
-
- /*
- * Be careful not to use any members of iwl3945_rs_sta (like trying
- * to use iwl_priv to print out debugging) since it may not be fully
- * initialized at this point.
- */
- del_timer_sync(&rs_sta->rate_scale_flush);
-}
-
-
-/**
- * rs_tx_status - Update rate control values based on Tx results
- *
- * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by
- * the hardware for each rate.
- */
-static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb)
-{
- s8 retries = 0, current_count;
- int scale_rate_index, first_index, last_index;
- unsigned long flags;
- struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
- struct iwl3945_rs_sta *rs_sta = priv_sta;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- retries = info->status.rates[0].count;
- /* Sanity Check for retries */
- if (retries > IWL_RATE_RETRY_TH)
- retries = IWL_RATE_RETRY_TH;
-
- first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
- if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) {
- IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index);
- return;
- }
-
- if (!priv_sta) {
- IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
- return;
- }
-
- /* Treat uninitialized rate scaling data same as non-existing. */
- if (!rs_sta->priv) {
- IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n");
- return;
- }
-
-
- rs_sta->tx_packets++;
-
- scale_rate_index = first_index;
- last_index = first_index;
-
- /*
- * Update the window for each rate. We determine which rates
- * were Tx'd based on the total number of retries vs. the number
- * of retries configured for each rate -- currently set to the
- * priv value 'retry_rate' vs. rate specific
- *
- * On exit from this while loop last_index indicates the rate
- * at which the frame was finally transmitted (or failed if no
- * ACK)
- */
- while (retries > 1) {
- if ((retries - 1) < priv->retry_rate) {
- current_count = (retries - 1);
- last_index = scale_rate_index;
- } else {
- current_count = priv->retry_rate;
- last_index = iwl3945_rs_next_rate(priv,
- scale_rate_index);
- }
-
- /* Update this rate accounting for as many retries
- * as was used for it (per current_count) */
- iwl3945_collect_tx_data(rs_sta,
- &rs_sta->win[scale_rate_index],
- 0, current_count, scale_rate_index);
- IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n",
- scale_rate_index, current_count);
-
- retries -= current_count;
-
- scale_rate_index = last_index;
- }
-
-
- /* Update the last index window with success/failure based on ACK */
- IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n",
- last_index,
- (info->flags & IEEE80211_TX_STAT_ACK) ?
- "success" : "failure");
- iwl3945_collect_tx_data(rs_sta,
- &rs_sta->win[last_index],
- info->flags & IEEE80211_TX_STAT_ACK, 1, last_index);
-
- /* We updated the rate scale window -- if its been more than
- * flush_time since the last run, schedule the flush
- * again */
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- if (!rs_sta->flush_pending &&
- time_after(jiffies, rs_sta->last_flush +
- rs_sta->flush_time)) {
-
- rs_sta->last_partial_flush = jiffies;
- rs_sta->flush_pending = 1;
- mod_timer(&rs_sta->rate_scale_flush,
- jiffies + rs_sta->flush_time);
- }
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta,
- u8 index, u16 rate_mask, enum ieee80211_band band)
-{
- u8 high = IWL_RATE_INVALID;
- u8 low = IWL_RATE_INVALID;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
- /* 802.11A walks to the next literal adjacent rate in
- * the rate table */
- if (unlikely(band == IEEE80211_BAND_5GHZ)) {
- int i;
- u32 mask;
-
- /* Find the previous rate that is in the rate mask */
- i = index - 1;
- for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
- if (rate_mask & mask) {
- low = i;
- break;
- }
- }
-
- /* Find the next rate that is in the rate mask */
- i = index + 1;
- for (mask = (1 << i); i < IWL_RATE_COUNT_3945;
- i++, mask <<= 1) {
- if (rate_mask & mask) {
- high = i;
- break;
- }
- }
-
- return (high << 8) | low;
- }
-
- low = index;
- while (low != IWL_RATE_INVALID) {
- if (rs_sta->tgg)
- low = iwl3945_rates[low].prev_rs_tgg;
- else
- low = iwl3945_rates[low].prev_rs;
- if (low == IWL_RATE_INVALID)
- break;
- if (rate_mask & (1 << low))
- break;
- IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
- }
-
- high = index;
- while (high != IWL_RATE_INVALID) {
- if (rs_sta->tgg)
- high = iwl3945_rates[high].next_rs_tgg;
- else
- high = iwl3945_rates[high].next_rs;
- if (high == IWL_RATE_INVALID)
- break;
- if (rate_mask & (1 << high))
- break;
- IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
- }
-
- return (high << 8) | low;
-}
-
-/**
- * rs_get_rate - find the rate for the requested packet
- *
- * Returns the ieee80211_rate structure allocated by the driver.
- *
- * The rate control algorithm has no internal mapping between hw_mode's
- * rate ordering and the rate ordering used by the rate control algorithm.
- *
- * The rate control algorithm uses a single table of rates that goes across
- * the entire A/B/G spectrum vs. being limited to just one particular
- * hw_mode.
- *
- * As such, we can't convert the index obtained below into the hw_mode's
- * rate table and must reference the driver allocated rate table
- *
- */
-static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
- void *priv_sta, struct ieee80211_tx_rate_control *txrc)
-{
- struct ieee80211_supported_band *sband = txrc->sband;
- struct sk_buff *skb = txrc->skb;
- u8 low = IWL_RATE_INVALID;
- u8 high = IWL_RATE_INVALID;
- u16 high_low;
- int index;
- struct iwl3945_rs_sta *rs_sta = priv_sta;
- struct iwl3945_rate_scale_data *window = NULL;
- int current_tpt = IWL_INVALID_VALUE;
- int low_tpt = IWL_INVALID_VALUE;
- int high_tpt = IWL_INVALID_VALUE;
- u32 fail_count;
- s8 scale_action = 0;
- unsigned long flags;
- u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0;
- s8 max_rate_idx = -1;
- struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- /* Treat uninitialized rate scaling data same as non-existing. */
- if (rs_sta && !rs_sta->priv) {
- IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n");
- priv_sta = NULL;
- }
-
- if (rate_control_send_low(sta, priv_sta, txrc))
- return;
-
- rate_mask = sta->supp_rates[sband->band];
-
- /* get user max rate if set */
- max_rate_idx = txrc->max_rate_idx;
- if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1))
- max_rate_idx += IWL_FIRST_OFDM_RATE;
- if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT))
- max_rate_idx = -1;
-
- index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1);
-
- if (sband->band == IEEE80211_BAND_5GHZ)
- rate_mask = rate_mask << IWL_FIRST_OFDM_RATE;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- /* for recent assoc, choose best rate regarding
- * to rssi value
- */
- if (rs_sta->start_rate != IWL_RATE_INVALID) {
- if (rs_sta->start_rate < index &&
- (rate_mask & (1 << rs_sta->start_rate)))
- index = rs_sta->start_rate;
- rs_sta->start_rate = IWL_RATE_INVALID;
- }
-
- /* force user max rate if set by user */
- if ((max_rate_idx != -1) && (max_rate_idx < index)) {
- if (rate_mask & (1 << max_rate_idx))
- index = max_rate_idx;
- }
-
- window = &(rs_sta->win[index]);
-
- fail_count = window->counter - window->success_counter;
-
- if (((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
- (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) {
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: "
- "counter: %d, success_counter: %d, "
- "expected_tpt is %sNULL\n",
- index,
- window->counter,
- window->success_counter,
- rs_sta->expected_tpt ? "not " : "");
-
- /* Can't calculate this yet; not enough history */
- window->average_tpt = IWL_INVALID_VALUE;
- goto out;
-
- }
-
- current_tpt = window->average_tpt;
-
- high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask,
- sband->band);
- low = high_low & 0xff;
- high = (high_low >> 8) & 0xff;
-
- /* If user set max rate, dont allow higher than user constrain */
- if ((max_rate_idx != -1) && (max_rate_idx < high))
- high = IWL_RATE_INVALID;
-
- /* Collect Measured throughputs of adjacent rates */
- if (low != IWL_RATE_INVALID)
- low_tpt = rs_sta->win[low].average_tpt;
-
- if (high != IWL_RATE_INVALID)
- high_tpt = rs_sta->win[high].average_tpt;
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- scale_action = 0;
-
- /* Low success ratio , need to drop the rate */
- if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) {
- IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
- scale_action = -1;
- /* No throughput measured yet for adjacent rates,
- * try increase */
- } else if ((low_tpt == IWL_INVALID_VALUE) &&
- (high_tpt == IWL_INVALID_VALUE)) {
-
- if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH)
- scale_action = 1;
- else if (low != IWL_RATE_INVALID)
- scale_action = 0;
-
- /* Both adjacent throughputs are measured, but neither one has
- * better throughput; we're using the best rate, don't change
- * it! */
- } else if ((low_tpt != IWL_INVALID_VALUE) &&
- (high_tpt != IWL_INVALID_VALUE) &&
- (low_tpt < current_tpt) && (high_tpt < current_tpt)) {
-
- IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < "
- "current_tpt [%d]\n",
- low_tpt, high_tpt, current_tpt);
- scale_action = 0;
-
- /* At least one of the rates has better throughput */
- } else {
- if (high_tpt != IWL_INVALID_VALUE) {
-
- /* High rate has better throughput, Increase
- * rate */
- if (high_tpt > current_tpt &&
- window->success_ratio >= IWL_RATE_INCREASE_TH)
- scale_action = 1;
- else {
- IWL_DEBUG_RATE(priv,
- "decrease rate because of high tpt\n");
- scale_action = 0;
- }
- } else if (low_tpt != IWL_INVALID_VALUE) {
- if (low_tpt > current_tpt) {
- IWL_DEBUG_RATE(priv,
- "decrease rate because of low tpt\n");
- scale_action = -1;
- } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) {
- /* Lower rate has better
- * throughput,decrease rate */
- scale_action = 1;
- }
- }
- }
-
- /* Sanity check; asked for decrease, but success rate or throughput
- * has been good at old rate. Don't change it. */
- if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
- ((window->success_ratio > IWL_RATE_HIGH_TH) ||
- (current_tpt > (100 * rs_sta->expected_tpt[low]))))
- scale_action = 0;
-
- switch (scale_action) {
- case -1:
-
- /* Decrese rate */
- if (low != IWL_RATE_INVALID)
- index = low;
- break;
-
- case 1:
- /* Increase rate */
- if (high != IWL_RATE_INVALID)
- index = high;
-
- break;
-
- case 0:
- default:
- /* No change */
- break;
- }
-
- IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n",
- index, scale_action, low, high);
-
- out:
-
- rs_sta->last_txrate_idx = index;
- if (sband->band == IEEE80211_BAND_5GHZ)
- info->control.rates[0].idx = rs_sta->last_txrate_idx -
- IWL_FIRST_OFDM_RATE;
- else
- info->control.rates[0].idx = rs_sta->last_txrate_idx;
-
- IWL_DEBUG_RATE(priv, "leave: %d\n", index);
-}
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static int iwl3945_open_file_generic(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file,
- char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- char *buff;
- int desc = 0;
- int j;
- ssize_t ret;
- struct iwl3945_rs_sta *lq_sta = file->private_data;
-
- buff = kmalloc(1024, GFP_KERNEL);
- if (!buff)
- return -ENOMEM;
-
- desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n"
- "rate=0x%X flush time %d\n",
- lq_sta->tx_packets,
- lq_sta->last_txrate_idx,
- lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time));
- for (j = 0; j < IWL_RATE_COUNT_3945; j++) {
- desc += sprintf(buff+desc,
- "counter=%d success=%d %%=%d\n",
- lq_sta->win[j].counter,
- lq_sta->win[j].success_counter,
- lq_sta->win[j].success_ratio);
- }
- ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
- kfree(buff);
- return ret;
-}
-
-static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
- .read = iwl3945_sta_dbgfs_stats_table_read,
- .open = iwl3945_open_file_generic,
- .llseek = default_llseek,
-};
-
-static void iwl3945_add_debugfs(void *priv, void *priv_sta,
- struct dentry *dir)
-{
- struct iwl3945_rs_sta *lq_sta = priv_sta;
-
- lq_sta->rs_sta_dbgfs_stats_table_file =
- debugfs_create_file("rate_stats_table", 0600, dir,
- lq_sta, &rs_sta_dbgfs_stats_table_ops);
-
-}
-
-static void iwl3945_remove_debugfs(void *priv, void *priv_sta)
-{
- struct iwl3945_rs_sta *lq_sta = priv_sta;
- debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
-}
-#endif
-
-/*
- * Initialization of rate scaling information is done by driver after
- * the station is added. Since mac80211 calls this function before a
- * station is added we ignore it.
- */
-static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta)
-{
-}
-
-static struct rate_control_ops rs_ops = {
- .module = NULL,
- .name = RS_NAME,
- .tx_status = rs_tx_status,
- .get_rate = rs_get_rate,
- .rate_init = rs_rate_init_stub,
- .alloc = rs_alloc,
- .free = rs_free,
- .alloc_sta = rs_alloc_sta,
- .free_sta = rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
- .add_sta_debugfs = iwl3945_add_debugfs,
- .remove_sta_debugfs = iwl3945_remove_debugfs,
-#endif
-
-};
-void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
-{
- struct iwl_priv *priv = hw->priv;
- s32 rssi = 0;
- unsigned long flags;
- struct iwl3945_rs_sta *rs_sta;
- struct ieee80211_sta *sta;
- struct iwl3945_sta_priv *psta;
-
- IWL_DEBUG_RATE(priv, "enter\n");
-
- rcu_read_lock();
-
- sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif,
- priv->stations[sta_id].sta.sta.addr);
- if (!sta) {
- IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n");
- rcu_read_unlock();
- return;
- }
-
- psta = (void *) sta->drv_priv;
- rs_sta = &psta->rs_sta;
-
- spin_lock_irqsave(&rs_sta->lock, flags);
-
- rs_sta->tgg = 0;
- switch (priv->band) {
- case IEEE80211_BAND_2GHZ:
- /* TODO: this always does G, not a regression */
- if (priv->contexts[IWL_RXON_CTX_BSS].active.flags &
- RXON_FLG_TGG_PROTECT_MSK) {
- rs_sta->tgg = 1;
- rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot;
- } else
- rs_sta->expected_tpt = iwl3945_expected_tpt_g;
- break;
-
- case IEEE80211_BAND_5GHZ:
- rs_sta->expected_tpt = iwl3945_expected_tpt_a;
- break;
- case IEEE80211_NUM_BANDS:
- BUG();
- break;
- }
-
- spin_unlock_irqrestore(&rs_sta->lock, flags);
-
- rssi = priv->_3945.last_rx_rssi;
- if (rssi == 0)
- rssi = IWL_MIN_RSSI_VAL;
-
- IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi);
-
- rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band);
-
- IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: "
- "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate,
- iwl3945_rates[rs_sta->start_rate].plcp);
- rcu_read_unlock();
-}
-
-int iwl3945_rate_control_register(void)
-{
- return ieee80211_rate_control_register(&rs_ops);
-}
-
-void iwl3945_rate_control_unregister(void)
-{
- ieee80211_rate_control_unregister(&rs_ops);
-}
-
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
deleted file mode 100644
index 5b6932c..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ /dev/null
@@ -1,2819 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-#include <net/mac80211.h>
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-eeprom.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-led.h"
-#include "iwl-3945-led.h"
-#include "iwl-3945-debugfs.h"
-#include "iwl-legacy.h"
-
-#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
- [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
- IWL_RATE_##r##M_IEEE, \
- IWL_RATE_##ip##M_INDEX, \
- IWL_RATE_##in##M_INDEX, \
- IWL_RATE_##rp##M_INDEX, \
- IWL_RATE_##rn##M_INDEX, \
- IWL_RATE_##pp##M_INDEX, \
- IWL_RATE_##np##M_INDEX, \
- IWL_RATE_##r##M_INDEX_TABLE, \
- IWL_RATE_##ip##M_INDEX_TABLE }
-
-/*
- * Parameter order:
- * rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to IWL_RATE_INVALID
- *
- */
-const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
- IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
- IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
- IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
- IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
- IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
- IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
- IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
- IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
- IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
- IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
- IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
- IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-};
-
-static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
-{
- u8 rate = iwl3945_rates[rate_index].prev_ieee;
-
- if (rate == IWL_RATE_INVALID)
- rate = rate_index;
- return rate;
-}
-
-/* 1 = enable the iwl3945_disable_events() function */
-#define IWL_EVT_DISABLE (0)
-#define IWL_EVT_DISABLE_SIZE (1532/32)
-
-/**
- * iwl3945_disable_events - Disable selected events in uCode event log
- *
- * Disable an event by writing "1"s into "disable"
- * bitmap in SRAM. Bit position corresponds to Event # (id/type).
- * Default values of 0 enable uCode events to be logged.
- * Use for only special debugging. This function is just a placeholder as-is,
- * you'll need to provide the special bits! ...
- * ... and set IWL_EVT_DISABLE to 1. */
-void iwl3945_disable_events(struct iwl_priv *priv)
-{
- int i;
- u32 base; /* SRAM address of event log header */
- u32 disable_ptr; /* SRAM address of event-disable bitmap array */
- u32 array_size; /* # of u32 entries in array */
- static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
- 0x00000000, /* 31 - 0 Event id numbers */
- 0x00000000, /* 63 - 32 */
- 0x00000000, /* 95 - 64 */
- 0x00000000, /* 127 - 96 */
- 0x00000000, /* 159 - 128 */
- 0x00000000, /* 191 - 160 */
- 0x00000000, /* 223 - 192 */
- 0x00000000, /* 255 - 224 */
- 0x00000000, /* 287 - 256 */
- 0x00000000, /* 319 - 288 */
- 0x00000000, /* 351 - 320 */
- 0x00000000, /* 383 - 352 */
- 0x00000000, /* 415 - 384 */
- 0x00000000, /* 447 - 416 */
- 0x00000000, /* 479 - 448 */
- 0x00000000, /* 511 - 480 */
- 0x00000000, /* 543 - 512 */
- 0x00000000, /* 575 - 544 */
- 0x00000000, /* 607 - 576 */
- 0x00000000, /* 639 - 608 */
- 0x00000000, /* 671 - 640 */
- 0x00000000, /* 703 - 672 */
- 0x00000000, /* 735 - 704 */
- 0x00000000, /* 767 - 736 */
- 0x00000000, /* 799 - 768 */
- 0x00000000, /* 831 - 800 */
- 0x00000000, /* 863 - 832 */
- 0x00000000, /* 895 - 864 */
- 0x00000000, /* 927 - 896 */
- 0x00000000, /* 959 - 928 */
- 0x00000000, /* 991 - 960 */
- 0x00000000, /* 1023 - 992 */
- 0x00000000, /* 1055 - 1024 */
- 0x00000000, /* 1087 - 1056 */
- 0x00000000, /* 1119 - 1088 */
- 0x00000000, /* 1151 - 1120 */
- 0x00000000, /* 1183 - 1152 */
- 0x00000000, /* 1215 - 1184 */
- 0x00000000, /* 1247 - 1216 */
- 0x00000000, /* 1279 - 1248 */
- 0x00000000, /* 1311 - 1280 */
- 0x00000000, /* 1343 - 1312 */
- 0x00000000, /* 1375 - 1344 */
- 0x00000000, /* 1407 - 1376 */
- 0x00000000, /* 1439 - 1408 */
- 0x00000000, /* 1471 - 1440 */
- 0x00000000, /* 1503 - 1472 */
- };
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return;
- }
-
- disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
- array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
-
- if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
- IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
- disable_ptr);
- for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
- iwl_write_targ_mem(priv,
- disable_ptr + (i * sizeof(u32)),
- evt_disable[i]);
-
- } else {
- IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
- IWL_DEBUG_INFO(priv, " by writing \"1\"s into disable bitmap\n");
- IWL_DEBUG_INFO(priv, " in SRAM at 0x%x, size %d u32s\n",
- disable_ptr, array_size);
- }
-
-}
-
-static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
-{
- int idx;
-
- for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
- if (iwl3945_rates[idx].plcp == plcp)
- return idx;
- return -1;
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
-
-static const char *iwl3945_get_tx_fail_reason(u32 status)
-{
- switch (status & TX_STATUS_MSK) {
- case TX_3945_STATUS_SUCCESS:
- return "SUCCESS";
- TX_STATUS_ENTRY(SHORT_LIMIT);
- TX_STATUS_ENTRY(LONG_LIMIT);
- TX_STATUS_ENTRY(FIFO_UNDERRUN);
- TX_STATUS_ENTRY(MGMNT_ABORT);
- TX_STATUS_ENTRY(NEXT_FRAG);
- TX_STATUS_ENTRY(LIFE_EXPIRE);
- TX_STATUS_ENTRY(DEST_PS);
- TX_STATUS_ENTRY(ABORTED);
- TX_STATUS_ENTRY(BT_RETRY);
- TX_STATUS_ENTRY(STA_INVALID);
- TX_STATUS_ENTRY(FRAG_DROPPED);
- TX_STATUS_ENTRY(TID_DISABLE);
- TX_STATUS_ENTRY(FRAME_FLUSHED);
- TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
- TX_STATUS_ENTRY(TX_LOCKED);
- TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
- }
-
- return "UNKNOWN";
-}
-#else
-static inline const char *iwl3945_get_tx_fail_reason(u32 status)
-{
- return "";
-}
-#endif
-
-/*
- * get ieee prev rate from rate scale table.
- * for A and B mode we need to overright prev
- * value
- */
-int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
-{
- int next_rate = iwl3945_get_prev_ieee_rate(rate);
-
- switch (priv->band) {
- case IEEE80211_BAND_5GHZ:
- if (rate == IWL_RATE_12M_INDEX)
- next_rate = IWL_RATE_9M_INDEX;
- else if (rate == IWL_RATE_6M_INDEX)
- next_rate = IWL_RATE_6M_INDEX;
- break;
- case IEEE80211_BAND_2GHZ:
- if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
- iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- if (rate == IWL_RATE_11M_INDEX)
- next_rate = IWL_RATE_5M_INDEX;
- }
- break;
-
- default:
- break;
- }
-
- return next_rate;
-}
-
-
-/**
- * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
- *
- * When FW advances 'R' index, all entries between old and new 'R' index
- * need to be reclaimed. As result, some free space forms. If there is
- * enough free space (> low mark), wake the stack that feeds us.
- */
-static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
- int txq_id, int index)
-{
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct iwl_queue *q = &txq->q;
- struct iwl_tx_info *tx_info;
-
- BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM);
-
- for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
- q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
-
- tx_info = &txq->txb[txq->q.read_ptr];
- ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
- tx_info->skb = NULL;
- priv->cfg->ops->lib->txq_free_tfd(priv, txq);
- }
-
- if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
- (txq_id != IWL39_CMD_QUEUE_NUM) &&
- priv->mac80211_registered)
- iwl_wake_queue(priv, txq);
-}
-
-/**
- * iwl3945_rx_reply_tx - Handle Tx response
- */
-static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int index = SEQ_TO_INDEX(sequence);
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_tx_info *info;
- struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->status);
- int rate_idx;
- int fail;
-
- if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
- IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- index, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- ieee80211_tx_info_clear_status(info);
-
- /* Fill the MRR chain with some info about on-chip retransmissions */
- rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
- if (info->band == IEEE80211_BAND_5GHZ)
- rate_idx -= IWL_FIRST_OFDM_RATE;
-
- fail = tx_resp->failure_frame;
-
- info->status.rates[0].idx = rate_idx;
- info->status.rates[0].count = fail + 1; /* add final attempt */
-
- /* tx_status->rts_retry_count = tx_resp->failure_rts; */
- info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
- IEEE80211_TX_STAT_ACK : 0;
-
- IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
- txq_id, iwl3945_get_tx_fail_reason(status), status,
- tx_resp->rate, tx_resp->failure_frame);
-
- IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
- iwl3945_tx_queue_reclaim(priv, txq_id, index);
-
- if (status & TX_ABORT_REQUIRED_MSK)
- IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
-}
-
-
-
-/*****************************************************************************
- *
- * Intel PRO/Wireless 3945ABG/BG Network Connection
- *
- * RX handler implementations
- *
- *****************************************************************************/
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-/*
- * based on the assumption of all statistics counter are in DWORD
- * FIXME: This function is for debugging, do not deal with
- * the case of counters roll-over.
- */
-static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
- __le32 *stats)
-{
- int i;
- __le32 *prev_stats;
- u32 *accum_stats;
- u32 *delta, *max_delta;
-
- prev_stats = (__le32 *)&priv->_3945.statistics;
- accum_stats = (u32 *)&priv->_3945.accum_statistics;
- delta = (u32 *)&priv->_3945.delta_statistics;
- max_delta = (u32 *)&priv->_3945.max_delta;
-
- for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
- i += sizeof(__le32), stats++, prev_stats++, delta++,
- max_delta++, accum_stats++) {
- if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
- *delta = (le32_to_cpu(*stats) -
- le32_to_cpu(*prev_stats));
- *accum_stats += *delta;
- if (*delta > *max_delta)
- *max_delta = *delta;
- }
- }
-
- /* reset accumulative statistics for "no-counter" type statistics */
- priv->_3945.accum_statistics.general.temperature =
- priv->_3945.statistics.general.temperature;
- priv->_3945.accum_statistics.general.ttl_timestamp =
- priv->_3945.statistics.general.ttl_timestamp;
-}
-#endif
-
-/**
- * iwl3945_good_plcp_health - checks for plcp error.
- *
- * When the plcp error is exceeding the thresholds, reset the radio
- * to improve the throughput.
- */
-static bool iwl3945_good_plcp_health(struct iwl_priv *priv,
- struct iwl_rx_packet *pkt)
-{
- bool rc = true;
- struct iwl3945_notif_statistics current_stat;
- int combined_plcp_delta;
- unsigned int plcp_msec;
- unsigned long plcp_received_jiffies;
-
- if (priv->cfg->base_params->plcp_delta_threshold ==
- IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
- IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
- return rc;
- }
- memcpy(¤t_stat, pkt->u.raw, sizeof(struct
- iwl3945_notif_statistics));
- /*
- * check for plcp_err and trigger radio reset if it exceeds
- * the plcp error threshold plcp_delta.
- */
- plcp_received_jiffies = jiffies;
- plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
- (long) priv->plcp_jiffies);
- priv->plcp_jiffies = plcp_received_jiffies;
- /*
- * check to make sure plcp_msec is not 0 to prevent division
- * by zero.
- */
- if (plcp_msec) {
- combined_plcp_delta =
- (le32_to_cpu(current_stat.rx.ofdm.plcp_err) -
- le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err));
-
- if ((combined_plcp_delta > 0) &&
- ((combined_plcp_delta * 100) / plcp_msec) >
- priv->cfg->base_params->plcp_delta_threshold) {
- /*
- * if plcp_err exceed the threshold, the following
- * data is printed in csv format:
- * Text: plcp_err exceeded %d,
- * Received ofdm.plcp_err,
- * Current ofdm.plcp_err,
- * combined_plcp_delta,
- * plcp_msec
- */
- IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
- "%u, %d, %u mSecs\n",
- priv->cfg->base_params->plcp_delta_threshold,
- le32_to_cpu(current_stat.rx.ofdm.plcp_err),
- combined_plcp_delta, plcp_msec);
- /*
- * Reset the RF radio due to the high plcp
- * error rate
- */
- rc = false;
- }
- }
- return rc;
-}
-
-void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
- IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
- (int)sizeof(struct iwl3945_notif_statistics),
- le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
-#endif
- iwl_recover_from_statistics(priv, pkt);
-
- memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
-}
-
-void iwl3945_reply_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- __le32 *flag = (__le32 *)&pkt->u.raw;
-
- if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- memset(&priv->_3945.accum_statistics, 0,
- sizeof(struct iwl3945_notif_statistics));
- memset(&priv->_3945.delta_statistics, 0,
- sizeof(struct iwl3945_notif_statistics));
- memset(&priv->_3945.max_delta, 0,
- sizeof(struct iwl3945_notif_statistics));
-#endif
- IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
- }
- iwl3945_hw_rx_statistics(priv, rxb);
-}
-
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-/* This is necessary only for a number of statistics, see the caller. */
-static int iwl3945_is_network_packet(struct iwl_priv *priv,
- struct ieee80211_hdr *header)
-{
- /* Filter incoming packets to determine if they are targeted toward
- * this network, discarding packets coming from ourselves */
- switch (priv->iw_mode) {
- case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr3, priv->bssid);
- case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr2, priv->bssid);
- default:
- return 1;
- }
-}
-
-static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb,
- struct ieee80211_rx_status *stats)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
- struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
- struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
- u16 len = le16_to_cpu(rx_hdr->len);
- struct sk_buff *skb;
- __le16 fc = hdr->frame_control;
-
- /* We received data from the HW, so stop the watchdog */
- if (unlikely(len + IWL39_RX_FRAME_SIZE >
- PAGE_SIZE << priv->hw_params.rx_page_order)) {
- IWL_DEBUG_DROP(priv, "Corruption detected!\n");
- return;
- }
-
- /* We only process data packets if the interface is open */
- if (unlikely(!priv->is_open)) {
- IWL_DEBUG_DROP_LIMIT(priv,
- "Dropping packet while interface is not open.\n");
- return;
- }
-
- skb = dev_alloc_skb(128);
- if (!skb) {
- IWL_ERR(priv, "dev_alloc_skb failed\n");
- return;
- }
-
- if (!iwl3945_mod_params.sw_crypto)
- iwl_set_decrypted_flag(priv,
- (struct ieee80211_hdr *)rxb_addr(rxb),
- le32_to_cpu(rx_end->status), stats);
-
- skb_add_rx_frag(skb, 0, rxb->page,
- (void *)rx_hdr->payload - (void *)pkt, len);
-
- iwl_update_stats(priv, false, fc, len);
- memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
- ieee80211_rx(priv->hw, skb);
- priv->alloc_rxb_page--;
- rxb->page = NULL;
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct ieee80211_hdr *header;
- struct ieee80211_rx_status rx_status;
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
- struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
- struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
- u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
- u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
- u8 network_packet;
-
- rx_status.flag = 0;
- rx_status.mactime = le64_to_cpu(rx_end->timestamp);
- rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
- rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
- rx_status.band);
-
- rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
- if (rx_status.band == IEEE80211_BAND_5GHZ)
- rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
-
- rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
- RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
-
- /* set the preamble flag if appropriate */
- if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- rx_status.flag |= RX_FLAG_SHORTPRE;
-
- if ((unlikely(rx_stats->phy_count > 20))) {
- IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
- rx_stats->phy_count);
- return;
- }
-
- if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
- || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
- IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
- return;
- }
-
-
-
- /* Convert 3945's rssi indicator to dBm */
- rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
-
- IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_stats_sig_avg,
- rx_stats_noise_diff);
-
- header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
-
- network_packet = iwl3945_is_network_packet(priv, header);
-
- IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
- network_packet ? '*' : ' ',
- le16_to_cpu(rx_hdr->channel),
- rx_status.signal, rx_status.signal,
- rx_status.rate_idx);
-
- iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
-
- if (network_packet) {
- priv->_3945.last_beacon_time =
- le32_to_cpu(rx_end->beacon_timestamp);
- priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
- priv->_3945.last_rx_rssi = rx_status.signal;
- }
-
- iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
-}
-
-int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- dma_addr_t addr, u16 len, u8 reset, u8 pad)
-{
- int count;
- struct iwl_queue *q;
- struct iwl3945_tfd *tfd, *tfd_tmp;
-
- q = &txq->q;
- tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
- tfd = &tfd_tmp[q->write_ptr];
-
- if (reset)
- memset(tfd, 0, sizeof(*tfd));
-
- count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
-
- if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
- IWL_ERR(priv, "Error can not send more than %d chunks\n",
- NUM_TFD_CHUNKS);
- return -EINVAL;
- }
-
- tfd->tbs[count].addr = cpu_to_le32(addr);
- tfd->tbs[count].len = cpu_to_le32(len);
-
- count++;
-
- tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
- TFD_CTL_PAD_SET(pad));
-
- return 0;
-}
-
-/**
- * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
- *
- * Does NOT advance any indexes
- */
-void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
- struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
- int index = txq->q.read_ptr;
- struct iwl3945_tfd *tfd = &tfd_tmp[index];
- struct pci_dev *dev = priv->pci_dev;
- int i;
- int counter;
-
- /* sanity check */
- counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
- if (counter > NUM_TFD_CHUNKS) {
- IWL_ERR(priv, "Too many chunks: %i\n", counter);
- /* @todo issue fatal error, it is quite serious situation */
- return;
- }
-
- /* Unmap tx_cmd */
- if (counter)
- pci_unmap_single(dev,
- dma_unmap_addr(&txq->meta[index], mapping),
- dma_unmap_len(&txq->meta[index], len),
- PCI_DMA_TODEVICE);
-
- /* unmap chunks if any */
-
- for (i = 1; i < counter; i++)
- pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
- le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
-
- /* free SKB */
- if (txq->txb) {
- struct sk_buff *skb;
-
- skb = txq->txb[txq->q.read_ptr].skb;
-
- /* can be called from irqs-disabled context */
- if (skb) {
- dev_kfree_skb_any(skb);
- txq->txb[txq->q.read_ptr].skb = NULL;
- }
- }
-}
-
-/**
- * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
- *
-*/
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id)
-{
- u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
- u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
- u16 rate_mask;
- int rate;
- u8 rts_retry_limit;
- u8 data_retry_limit;
- __le32 tx_flags;
- __le16 fc = hdr->frame_control;
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-
- rate = iwl3945_rates[rate_index].plcp;
- tx_flags = tx_cmd->tx_flags;
-
- /* We need to figure out how to get the sta->supp_rates while
- * in this running context */
- rate_mask = IWL_RATES_MASK_3945;
-
- /* Set retry limit on DATA packets and Probe Responses*/
- if (ieee80211_is_probe_resp(fc))
- data_retry_limit = 3;
- else
- data_retry_limit = IWL_DEFAULT_TX_RETRY;
- tx_cmd->data_retry_limit = data_retry_limit;
-
- if (tx_id >= IWL39_CMD_QUEUE_NUM)
- rts_retry_limit = 3;
- else
- rts_retry_limit = 7;
-
- if (data_retry_limit < rts_retry_limit)
- rts_retry_limit = data_retry_limit;
- tx_cmd->rts_retry_limit = rts_retry_limit;
-
- tx_cmd->rate = rate;
- tx_cmd->tx_flags = tx_flags;
-
- /* OFDM */
- tx_cmd->supp_rates[0] =
- ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
- /* CCK */
- tx_cmd->supp_rates[1] = (rate_mask & 0xF);
-
- IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
- "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
- tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
- tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
-}
-
-static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
-{
- unsigned long flags_spin;
- struct iwl_station_entry *station;
-
- if (sta_id == IWL_INVALID_STATION)
- return IWL_INVALID_STATION;
-
- spin_lock_irqsave(&priv->sta_lock, flags_spin);
- station = &priv->stations[sta_id];
-
- station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
- station->sta.rate_n_flags = cpu_to_le16(tx_rate);
- station->sta.mode = STA_CONTROL_MODIFY_MSK;
- iwl_send_add_sta(priv, &station->sta, CMD_ASYNC);
- spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-
- IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
- sta_id, tx_rate);
- return sta_id;
-}
-
-static void iwl3945_set_pwr_vmain(struct iwl_priv *priv)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do
-
- if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- iwl_poll_bit(priv, CSR_GPIO_IN,
- CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000);
- }
- */
-
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
-}
-
-static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
- iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
- iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
- iwl_write_direct32(priv, FH39_RCSR_CONFIG(0),
- FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
- FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
- (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
- FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
- (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
- FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
-
- /* fake read to flush all prev I/O */
- iwl_read_direct32(priv, FH39_RSSR_CTRL);
-
- return 0;
-}
-
-static int iwl3945_tx_reset(struct iwl_priv *priv)
-{
-
- /* bypass mode */
- iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
-
- /* RA 0 is active */
- iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
-
- /* all 6 fifo are active */
- iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
-
- iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
- iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
- iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
- iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
-
- iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
- priv->_3945.shared_phys);
-
- iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
-
-
- return 0;
-}
-
-/**
- * iwl3945_txq_ctx_reset - Reset TX queue context
- *
- * Destroys all DMA structures and initialize them again
- */
-static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
-{
- int rc;
- int txq_id, slots_num;
-
- iwl3945_hw_txq_ctx_free(priv);
-
- /* allocate tx queue structure */
- rc = iwl_alloc_txq_mem(priv);
- if (rc)
- return rc;
-
- /* Tx CMD queue */
- rc = iwl3945_tx_reset(priv);
- if (rc)
- goto error;
-
- /* Tx queue(s) */
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
- slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ?
- TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
- rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
- txq_id);
- if (rc) {
- IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
- goto error;
- }
- }
-
- return rc;
-
- error:
- iwl3945_hw_txq_ctx_free(priv);
- return rc;
-}
-
-
-/*
- * Start up 3945's basic functionality after it has been reset
- * (e.g. after platform boot, or shutdown via iwl_apm_stop())
- * NOTE: This does not load uCode nor start the embedded processor
- */
-static int iwl3945_apm_init(struct iwl_priv *priv)
-{
- int ret = iwl_apm_init(priv);
-
- /* Clear APMG (NIC's internal power management) interrupts */
- iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
- iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
-
- /* Reset radio chip */
- iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
- udelay(5);
- iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
-
- return ret;
-}
-
-static void iwl3945_nic_config(struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- unsigned long flags;
- u8 rev_id = 0;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Determine HW type */
- pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
-
- IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
-
- if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
- IWL_DEBUG_INFO(priv, "RTP type\n");
- else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
- IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
- } else {
- IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
- }
-
- if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
- IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
- } else
- IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
-
- if ((eeprom->board_revision & 0xF0) == 0xD0) {
- IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- } else {
- IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- }
-
- if (eeprom->almgor_m_version <= 1) {
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
- IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
- eeprom->almgor_m_version);
- } else {
- IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
- eeprom->almgor_m_version);
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
- IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
- IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
-}
-
-int iwl3945_hw_nic_init(struct iwl_priv *priv)
-{
- int rc;
- unsigned long flags;
- struct iwl_rx_queue *rxq = &priv->rxq;
-
- spin_lock_irqsave(&priv->lock, flags);
- priv->cfg->ops->lib->apm_ops.init(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl3945_set_pwr_vmain(priv);
-
- priv->cfg->ops->lib->apm_ops.config(priv);
-
- /* Allocate the RX queue, or reset if it is already allocated */
- if (!rxq->bd) {
- rc = iwl_rx_queue_alloc(priv);
- if (rc) {
- IWL_ERR(priv, "Unable to initialize Rx queue\n");
- return -ENOMEM;
- }
- } else
- iwl3945_rx_queue_reset(priv, rxq);
-
- iwl3945_rx_replenish(priv);
-
- iwl3945_rx_init(priv, rxq);
-
-
- /* Look at using this instead:
- rxq->need_update = 1;
- iwl_rx_queue_update_write_ptr(priv, rxq);
- */
-
- iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
-
- rc = iwl3945_txq_ctx_reset(priv);
- if (rc)
- return rc;
-
- set_bit(STATUS_INIT, &priv->status);
-
- return 0;
-}
-
-/**
- * iwl3945_hw_txq_ctx_free - Free TXQ Context
- *
- * Destroy all TX DMA queues and structures
- */
-void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
-{
- int txq_id;
-
- /* Tx queues */
- if (priv->txq)
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
- txq_id++)
- if (txq_id == IWL39_CMD_QUEUE_NUM)
- iwl_cmd_queue_free(priv);
- else
- iwl_tx_queue_free(priv, txq_id);
-
- /* free tx queue structure */
- iwl_free_txq_mem(priv);
-}
-
-void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
-{
- int txq_id;
-
- /* stop SCD */
- iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
- iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
-
- /* reset TFD queues */
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
- iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
- iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
- FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
- 1000);
- }
-
- iwl3945_hw_txq_ctx_free(priv);
-}
-
-/**
- * iwl3945_hw_reg_adjust_power_by_temp
- * return index delta into power gain settings table
-*/
-static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
-{
- return (new_reading - old_reading) * (-11) / 100;
-}
-
-/**
- * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
- */
-static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
-{
- return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
-}
-
-int iwl3945_hw_get_temperature(struct iwl_priv *priv)
-{
- return iwl_read32(priv, CSR_UCODE_DRV_GP2);
-}
-
-/**
- * iwl3945_hw_reg_txpower_get_temperature
- * get the current temperature by reading from NIC
-*/
-static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int temperature;
-
- temperature = iwl3945_hw_get_temperature(priv);
-
- /* driver's okay range is -260 to +25.
- * human readable okay range is 0 to +285 */
- IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
-
- /* handle insane temp reading */
- if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
- IWL_ERR(priv, "Error bad temperature value %d\n", temperature);
-
- /* if really really hot(?),
- * substitute the 3rd band/group's temp measured at factory */
- if (priv->last_temperature > 100)
- temperature = eeprom->groups[2].temperature;
- else /* else use most recent "sane" value from driver */
- temperature = priv->last_temperature;
- }
-
- return temperature; /* raw, not "human readable" */
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold.
- *
- * Both are lower than older versions' 9 degrees */
-#define IWL_TEMPERATURE_LIMIT_TIMER 6
-
-/**
- * is_temp_calib_needed - determines if new calibration is needed
- *
- * records new temperature in tx_mgr->temperature.
- * replaces tx_mgr->last_temperature *only* if calib needed
- * (assumes caller will actually do the calibration!). */
-static int is_temp_calib_needed(struct iwl_priv *priv)
-{
- int temp_diff;
-
- priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
- temp_diff = priv->temperature - priv->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- IWL_DEBUG_POWER(priv, "Same temp,\n");
- else
- IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
-
- /* if we don't need calibration, *don't* update last_temperature */
- if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
- IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
-
- /* assume that caller will actually do calib ...
- * update the "last temperature" value */
- priv->last_temperature = priv->temperature;
- return 1;
-}
-
-#define IWL_MAX_GAIN_ENTRIES 78
-#define IWL_CCK_FROM_OFDM_POWER_DIFF -5
-#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
-
-/* radio and DSP power table, each step is 1/2 dB.
- * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
-static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
- {
- {251, 127}, /* 2.4 GHz, highest power */
- {251, 127},
- {251, 127},
- {251, 127},
- {251, 125},
- {251, 110},
- {251, 105},
- {251, 98},
- {187, 125},
- {187, 115},
- {187, 108},
- {187, 99},
- {243, 119},
- {243, 111},
- {243, 105},
- {243, 97},
- {243, 92},
- {211, 106},
- {211, 100},
- {179, 120},
- {179, 113},
- {179, 107},
- {147, 125},
- {147, 119},
- {147, 112},
- {147, 106},
- {147, 101},
- {147, 97},
- {147, 91},
- {115, 107},
- {235, 121},
- {235, 115},
- {235, 109},
- {203, 127},
- {203, 121},
- {203, 115},
- {203, 108},
- {203, 102},
- {203, 96},
- {203, 92},
- {171, 110},
- {171, 104},
- {171, 98},
- {139, 116},
- {227, 125},
- {227, 119},
- {227, 113},
- {227, 107},
- {227, 101},
- {227, 96},
- {195, 113},
- {195, 106},
- {195, 102},
- {195, 95},
- {163, 113},
- {163, 106},
- {163, 102},
- {163, 95},
- {131, 113},
- {131, 106},
- {131, 102},
- {131, 95},
- {99, 113},
- {99, 106},
- {99, 102},
- {99, 95},
- {67, 113},
- {67, 106},
- {67, 102},
- {67, 95},
- {35, 113},
- {35, 106},
- {35, 102},
- {35, 95},
- {3, 113},
- {3, 106},
- {3, 102},
- {3, 95} }, /* 2.4 GHz, lowest power */
- {
- {251, 127}, /* 5.x GHz, highest power */
- {251, 120},
- {251, 114},
- {219, 119},
- {219, 101},
- {187, 113},
- {187, 102},
- {155, 114},
- {155, 103},
- {123, 117},
- {123, 107},
- {123, 99},
- {123, 92},
- {91, 108},
- {59, 125},
- {59, 118},
- {59, 109},
- {59, 102},
- {59, 96},
- {59, 90},
- {27, 104},
- {27, 98},
- {27, 92},
- {115, 118},
- {115, 111},
- {115, 104},
- {83, 126},
- {83, 121},
- {83, 113},
- {83, 105},
- {83, 99},
- {51, 118},
- {51, 111},
- {51, 104},
- {51, 98},
- {19, 116},
- {19, 109},
- {19, 102},
- {19, 98},
- {19, 93},
- {171, 113},
- {171, 107},
- {171, 99},
- {139, 120},
- {139, 113},
- {139, 107},
- {139, 99},
- {107, 120},
- {107, 113},
- {107, 107},
- {107, 99},
- {75, 120},
- {75, 113},
- {75, 107},
- {75, 99},
- {43, 120},
- {43, 113},
- {43, 107},
- {43, 99},
- {11, 120},
- {11, 113},
- {11, 107},
- {11, 99},
- {131, 107},
- {131, 99},
- {99, 120},
- {99, 113},
- {99, 107},
- {99, 99},
- {67, 120},
- {67, 113},
- {67, 107},
- {67, 99},
- {35, 120},
- {35, 113},
- {35, 107},
- {35, 99},
- {3, 120} } /* 5.x GHz, lowest power */
-};
-
-static inline u8 iwl3945_hw_reg_fix_power_index(int index)
-{
- if (index < 0)
- return 0;
- if (index >= IWL_MAX_GAIN_ENTRIES)
- return IWL_MAX_GAIN_ENTRIES - 1;
- return (u8) index;
-}
-
-/* Kick off thermal recalibration check every 60 seconds */
-#define REG_RECALIB_PERIOD (60)
-
-/**
- * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
- *
- * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
- * or 6 Mbit (OFDM) rates.
- */
-static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
- s32 rate_index, const s8 *clip_pwrs,
- struct iwl_channel_info *ch_info,
- int band_index)
-{
- struct iwl3945_scan_power_info *scan_power_info;
- s8 power;
- u8 power_index;
-
- scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
-
- /* use this channel group's 6Mbit clipping/saturation pwr,
- * but cap at regulatory scan power restriction (set during init
- * based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
-
- /* further limit to user's max power preference.
- * FIXME: Other spectrum management power limitations do not
- * seem to apply?? */
- power = min(power, priv->tx_power_user_lmt);
- scan_power_info->requested_power = power;
-
- /* find difference between new scan *power* and current "normal"
- * Tx *power* for 6Mb. Use this difference (x2) to adjust the
- * current "normal" temperature-compensated Tx power *index* for
- * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
- * *index*. */
- power_index = ch_info->power_info[rate_index].power_table_index
- - (power - ch_info->power_info
- [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
-
- /* store reference index that we use when adjusting *all* scan
- * powers. So we can accommodate user (all channel) or spectrum
- * management (single channel) power changes "between" temperature
- * feedback compensation procedures.
- * don't force fit this reference index into gain table; it may be a
- * negative number. This will help avoid errors when we're at
- * the lower bounds (highest gains, for warmest temperatures)
- * of the table. */
-
- /* don't exceed table bounds for "real" setting */
- power_index = iwl3945_hw_reg_fix_power_index(power_index);
-
- scan_power_info->power_table_index = power_index;
- scan_power_info->tpc.tx_gain =
- power_gain_table[band_index][power_index].tx_gain;
- scan_power_info->tpc.dsp_atten =
- power_gain_table[band_index][power_index].dsp_atten;
-}
-
-/**
- * iwl3945_send_tx_power - fill in Tx Power command with gain settings
- *
- * Configures power settings for all rates for the current channel,
- * using values from channel info struct, and send to NIC
- */
-static int iwl3945_send_tx_power(struct iwl_priv *priv)
-{
- int rate_idx, i;
- const struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_txpowertable_cmd txpower = {
- .channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel,
- };
- u16 chan;
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
-
- txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
- ch_info = iwl_get_channel_info(priv, priv->band, chan);
- if (!ch_info) {
- IWL_ERR(priv,
- "Failed to get channel info for channel %d [%d]\n",
- chan, priv->band);
- return -EINVAL;
- }
-
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
- "non-Tx channel.\n");
- return 0;
- }
-
- /* fill cmd with power settings for all rates for current channel */
- /* Fill OFDM rate */
- for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
- rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
-
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
- IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
- /* Fill CCK rates */
- for (rate_idx = IWL_FIRST_CCK_RATE;
- rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
- IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
-
- return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
- sizeof(struct iwl3945_txpowertable_cmd),
- &txpower);
-
-}
-
-/**
- * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
- * @ch_info: Channel to update. Uses power_info.requested_power.
- *
- * Replace requested_power and base_power_index ch_info fields for
- * one channel.
- *
- * Called if user or spectrum management changes power preferences.
- * Takes into account h/w and modulation limitations (clip power).
- *
- * This does *not* send anything to NIC, just sets up ch_info for one channel.
- *
- * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
- * properly fill out the scan powers, and actual h/w gain settings,
- * and send changes to NIC
- */
-static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
- struct iwl_channel_info *ch_info)
-{
- struct iwl3945_channel_power_info *power_info;
- int power_changed = 0;
- int i;
- const s8 *clip_pwrs;
- int power;
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* Get this channel's rate-to-current-power settings table */
- power_info = ch_info->power_info;
-
- /* update OFDM Txpower settings */
- for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
- i++, ++power_info) {
- int delta_idx;
-
- /* limit new power to be no more than h/w capability */
- power = min(ch_info->curr_txpow, clip_pwrs[i]);
- if (power == power_info->requested_power)
- continue;
-
- /* find difference between old and new requested powers,
- * update base (non-temp-compensated) power index */
- delta_idx = (power - power_info->requested_power) * 2;
- power_info->base_power_index -= delta_idx;
-
- /* save new requested power value */
- power_info->requested_power = power;
-
- power_changed = 1;
- }
-
- /* update CCK Txpower settings, based on OFDM 12M setting ...
- * ... all CCK power settings for a given channel are the *same*. */
- if (power_changed) {
- power =
- ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
- requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
-
- /* do all CCK rates' iwl3945_channel_power_info structures */
- for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
- power_info->requested_power = power;
- power_info->base_power_index =
- ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
- base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
- ++power_info;
- }
- }
-
- return 0;
-}
-
-/**
- * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
- *
- * NOTE: Returned power limit may be less (but not more) than requested,
- * based strictly on regulatory (eeprom and spectrum mgt) limitations
- * (no consideration for h/w clipping limitations).
- */
-static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
-{
- s8 max_power;
-
-#if 0
- /* if we're using TGd limits, use lower of TGd or EEPROM */
- if (ch_info->tgd_data.max_power != 0)
- max_power = min(ch_info->tgd_data.max_power,
- ch_info->eeprom.max_power_avg);
-
- /* else just use EEPROM limits */
- else
-#endif
- max_power = ch_info->eeprom.max_power_avg;
-
- return min(max_power, ch_info->max_power_avg);
-}
-
-/**
- * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
- *
- * Compensate txpower settings of *all* channels for temperature.
- * This only accounts for the difference between current temperature
- * and the factory calibration temperatures, and bases the new settings
- * on the channel's base_power_index.
- *
- * If RxOn is "associated", this sends the new Txpower to NIC!
- */
-static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int delta_index;
- const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
- u8 a_band;
- u8 rate_index;
- u8 scan_tbl_index;
- u8 i;
- int ref_temp;
- int temperature = priv->temperature;
-
- if (priv->disable_tx_power_cal ||
- test_bit(STATUS_SCANNING, &priv->status)) {
- /* do not perform tx power calibration */
- return 0;
- }
- /* set up new Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0; i < priv->channel_count; i++) {
- ch_info = &priv->channel_info[i];
- a_band = is_channel_a_band(ch_info);
-
- /* Get this chnlgrp's factory calibration temperature */
- ref_temp = (s16)eeprom->groups[ch_info->group_index].
- temperature;
-
- /* get power index adjustment based on current and factory
- * temps */
- delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
- ref_temp);
-
- /* set tx power value for all rates, OFDM and CCK */
- for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945;
- rate_index++) {
- int power_idx =
- ch_info->power_info[rate_index].base_power_index;
-
- /* temperature compensate */
- power_idx += delta_index;
-
- /* stay within table range */
- power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
- ch_info->power_info[rate_index].
- power_table_index = (u8) power_idx;
- ch_info->power_info[rate_index].tpc =
- power_gain_table[a_band][power_idx];
- }
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_index = 0;
- scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
- s32 actual_index = (scan_tbl_index == 0) ?
- IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
- iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
- actual_index, clip_pwrs,
- ch_info, a_band);
- }
- }
-
- /* send Txpower command for current channel to ucode */
- return priv->cfg->ops->lib->send_tx_power(priv);
-}
-
-int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
-{
- struct iwl_channel_info *ch_info;
- s8 max_power;
- u8 a_band;
- u8 i;
-
- if (priv->tx_power_user_lmt == power) {
- IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
- "limit: %ddBm.\n", power);
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
- priv->tx_power_user_lmt = power;
-
- /* set up new Tx powers for each and every channel, 2.4 and 5.x */
-
- for (i = 0; i < priv->channel_count; i++) {
- ch_info = &priv->channel_info[i];
- a_band = is_channel_a_band(ch_info);
-
- /* find minimum power of all user and regulatory constraints
- * (does not consider h/w clipping limitations) */
- max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
- max_power = min(power, max_power);
- if (max_power != ch_info->curr_txpow) {
- ch_info->curr_txpow = max_power;
-
- /* this considers the h/w clipping limitations */
- iwl3945_hw_reg_set_new_power(priv, ch_info);
- }
- }
-
- /* update txpower settings for all channels,
- * send to NIC if associated. */
- is_temp_calib_needed(priv);
- iwl3945_hw_reg_comp_txpower_temp(priv);
-
- return 0;
-}
-
-static int iwl3945_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- int rc = 0;
- struct iwl_rx_packet *pkt;
- struct iwl3945_rxon_assoc_cmd rxon_assoc;
- struct iwl_host_cmd cmd = {
- .id = REPLY_RXON_ASSOC,
- .len = sizeof(rxon_assoc),
- .flags = CMD_WANT_SKB,
- .data = &rxon_assoc,
- };
- const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
- const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
- IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct iwl_rx_packet *)cmd.reply_page;
- if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
- IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
- rc = -EIO;
- }
-
- iwl_free_pages(priv, cmd.reply_page);
-
- return rc;
-}
-
-/**
- * iwl3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data. This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active;
- struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
- int rc = 0;
- bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return -EINVAL;
-
- if (!iwl_is_alive(priv))
- return -1;
-
- /* always get timestamp with Rx frame */
- staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
- /* select antenna */
- staging_rxon->flags &=
- ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
- staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
-
- rc = iwl_check_rxon_cmd(priv, ctx);
- if (rc) {
- IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /* If we don't need to send a full RXON, we can use
- * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!iwl_full_rxon_required(priv, &priv->contexts[IWL_RXON_CTX_BSS])) {
- rc = iwl_send_rxon_assoc(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- if (rc) {
- IWL_ERR(priv, "Error setting RXON_ASSOC "
- "configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) {
- IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- active_rxon->reserved4 = 0;
- active_rxon->reserved5 = 0;
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
- sizeof(struct iwl3945_rxon_cmd),
- &priv->contexts[IWL_RXON_CTX_BSS].active);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (rc) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
- "configuration (%d).\n", rc);
- return rc;
- }
- iwl_clear_ucode_stations(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
- }
-
- IWL_DEBUG_INFO(priv, "Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(staging_rxon->channel),
- staging_rxon->bssid_addr);
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- staging_rxon->reserved4 = 0;
- staging_rxon->reserved5 = 0;
-
- iwl_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto);
-
- /* Apply the new configuration */
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
- sizeof(struct iwl3945_rxon_cmd),
- staging_rxon);
- if (rc) {
- IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
- if (!new_assoc) {
- iwl_clear_ucode_stations(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
- }
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- rc = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (rc) {
- IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
- return rc;
- }
-
- /* Init the hardware's rate fallback order based on the band */
- rc = iwl3945_init_hw_rate_table(priv);
- if (rc) {
- IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * iwl3945_reg_txpower_periodic - called when time to check our temperature.
- *
- * -- reset periodic timer
- * -- see if temp has changed enough to warrant re-calibration ... if so:
- * -- correct coeffs for temp (can reset temp timer)
- * -- save this temp as "last",
- * -- send new set of gain settings to NIC
- * NOTE: This should continue working, even when we're not associated,
- * so we can keep our internal table of scan powers current. */
-void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
-{
- /* This will kick in the "brute force"
- * iwl3945_hw_reg_comp_txpower_temp() below */
- if (!is_temp_calib_needed(priv))
- goto reschedule;
-
- /* Set up a new set of temp-adjusted TxPowers, send to NIC.
- * This is based *only* on current temperature,
- * ignoring any previous power measurements */
- iwl3945_hw_reg_comp_txpower_temp(priv);
-
- reschedule:
- queue_delayed_work(priv->workqueue,
- &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
-}
-
-static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv,
- _3945.thermal_periodic.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_reg_txpower_periodic(priv);
- mutex_unlock(&priv->mutex);
-}
-
-/**
- * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
- * for the channel.
- *
- * This function is used when initializing channel-info structs.
- *
- * NOTE: These channel groups do *NOT* match the bands above!
- * These channel groups are based on factory-tested channels;
- * on A-band, EEPROM's "group frequency" entries represent the top
- * channel in each group 1-4. Group 5 All B/G channels are in group 0.
- */
-static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
- const struct iwl_channel_info *ch_info)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
- u8 group;
- u16 group_index = 0; /* based on factory calib frequencies */
- u8 grp_channel;
-
- /* Find the group index for the channel ... don't use index 1(?) */
- if (is_channel_a_band(ch_info)) {
- for (group = 1; group < 5; group++) {
- grp_channel = ch_grp[group].group_channel;
- if (ch_info->channel <= grp_channel) {
- group_index = group;
- break;
- }
- }
- /* group 4 has a few channels *above* its factory cal freq */
- if (group == 5)
- group_index = 4;
- } else
- group_index = 0; /* 2.4 GHz, group 0 */
-
- IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
- group_index);
- return group_index;
-}
-
-/**
- * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
- *
- * Interpolate to get nominal (i.e. at factory calibration temperature) index
- * into radio/DSP gain settings table for requested power.
- */
-static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
- s8 requested_power,
- s32 setting_index, s32 *new_index)
-{
- const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- s32 index0, index1;
- s32 power = 2 * requested_power;
- s32 i;
- const struct iwl3945_eeprom_txpower_sample *samples;
- s32 gains0, gains1;
- s32 res;
- s32 denominator;
-
- chnl_grp = &eeprom->groups[setting_index];
- samples = chnl_grp->samples;
- for (i = 0; i < 5; i++) {
- if (power == samples[i].power) {
- *new_index = samples[i].gain_index;
- return 0;
- }
- }
-
- if (power > samples[1].power) {
- index0 = 0;
- index1 = 1;
- } else if (power > samples[2].power) {
- index0 = 1;
- index1 = 2;
- } else if (power > samples[3].power) {
- index0 = 2;
- index1 = 3;
- } else {
- index0 = 3;
- index1 = 4;
- }
-
- denominator = (s32) samples[index1].power - (s32) samples[index0].power;
- if (denominator == 0)
- return -EINVAL;
- gains0 = (s32) samples[index0].gain_index * (1 << 19);
- gains1 = (s32) samples[index1].gain_index * (1 << 19);
- res = gains0 + (gains1 - gains0) *
- ((s32) power - (s32) samples[index0].power) / denominator +
- (1 << 18);
- *new_index = res >> 19;
- return 0;
-}
-
-static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
-{
- u32 i;
- s32 rate_index;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- const struct iwl3945_eeprom_txpower_group *group;
-
- IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
-
- for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
- s8 *clip_pwrs; /* table of power levels for each rate */
- s8 satur_pwr; /* saturation power for each chnl group */
- group = &eeprom->groups[i];
-
- /* sanity check on factory saturation power value */
- if (group->saturation_power < 40) {
- IWL_WARN(priv, "Error: saturation power is %d, "
- "less than minimum expected 40\n",
- group->saturation_power);
- return;
- }
-
- /*
- * Derive requested power levels for each rate, based on
- * hardware capabilities (saturation power for band).
- * Basic value is 3dB down from saturation, with further
- * power reductions for highest 3 data rates. These
- * backoffs provide headroom for high rate modulation
- * power peaks, without too much distortion (clipping).
- */
- /* we'll fill in this array with h/w max power levels */
- clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
-
- /* divide factory saturation power by 2 to find -3dB level */
- satur_pwr = (s8) (group->saturation_power >> 1);
-
- /* fill in channel group's nominal powers for each rate */
- for (rate_index = 0;
- rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
- switch (rate_index) {
- case IWL_RATE_36M_INDEX_TABLE:
- if (i == 0) /* B/G */
- *clip_pwrs = satur_pwr;
- else /* A */
- *clip_pwrs = satur_pwr - 5;
- break;
- case IWL_RATE_48M_INDEX_TABLE:
- if (i == 0)
- *clip_pwrs = satur_pwr - 7;
- else
- *clip_pwrs = satur_pwr - 10;
- break;
- case IWL_RATE_54M_INDEX_TABLE:
- if (i == 0)
- *clip_pwrs = satur_pwr - 9;
- else
- *clip_pwrs = satur_pwr - 12;
- break;
- default:
- *clip_pwrs = satur_pwr;
- break;
- }
- }
- }
-}
-
-/**
- * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
- *
- * Second pass (during init) to set up priv->channel_info
- *
- * Set up Tx-power settings in our channel info database for each VALID
- * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
- * and current temperature.
- *
- * Since this is based on current temperature (at init time), these values may
- * not be valid for very long, but it gives us a starting/default point,
- * and allows us to active (i.e. using Tx) scan.
- *
- * This does *not* write values to NIC, just sets up our internal table.
- */
-int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch_info = NULL;
- struct iwl3945_channel_power_info *pwr_info;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- int delta_index;
- u8 rate_index;
- u8 scan_tbl_index;
- const s8 *clip_pwrs; /* array of power levels for each rate */
- u8 gain, dsp_atten;
- s8 power;
- u8 pwr_index, base_pwr_index, a_band;
- u8 i;
- int temperature;
-
- /* save temperature reference,
- * so we can determine next time to calibrate */
- temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
- priv->last_temperature = temperature;
-
- iwl3945_hw_reg_init_channel_groups(priv);
-
- /* initialize Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
- i++, ch_info++) {
- a_band = is_channel_a_band(ch_info);
- if (!is_channel_valid(ch_info))
- continue;
-
- /* find this channel's channel group (*not* "band") index */
- ch_info->group_index =
- iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
-
- /* Get this chnlgrp's rate->max/clip-powers table */
- clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
- /* calculate power index *adjustment* value according to
- * diff between current temperature and factory temperature */
- delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
- eeprom->groups[ch_info->group_index].
- temperature);
-
- IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
- ch_info->channel, delta_index, temperature +
- IWL_TEMP_CONVERT);
-
- /* set tx power value for all OFDM rates */
- for (rate_index = 0; rate_index < IWL_OFDM_RATES;
- rate_index++) {
- s32 uninitialized_var(power_idx);
- int rc;
-
- /* use channel group's clip-power table,
- * but don't exceed channel's max power */
- s8 pwr = min(ch_info->max_power_avg,
- clip_pwrs[rate_index]);
-
- pwr_info = &ch_info->power_info[rate_index];
-
- /* get base (i.e. at factory-measured temperature)
- * power table index for this rate's power */
- rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
- ch_info->group_index,
- &power_idx);
- if (rc) {
- IWL_ERR(priv, "Invalid power index\n");
- return rc;
- }
- pwr_info->base_power_index = (u8) power_idx;
-
- /* temperature compensate */
- power_idx += delta_index;
-
- /* stay within range of gain table */
- power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
-
- /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
- pwr_info->requested_power = pwr;
- pwr_info->power_table_index = (u8) power_idx;
- pwr_info->tpc.tx_gain =
- power_gain_table[a_band][power_idx].tx_gain;
- pwr_info->tpc.dsp_atten =
- power_gain_table[a_band][power_idx].dsp_atten;
- }
-
- /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
- power = pwr_info->requested_power +
- IWL_CCK_FROM_OFDM_POWER_DIFF;
- pwr_index = pwr_info->power_table_index +
- IWL_CCK_FROM_OFDM_INDEX_DIFF;
- base_pwr_index = pwr_info->base_power_index +
- IWL_CCK_FROM_OFDM_INDEX_DIFF;
-
- /* stay within table range */
- pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
- gain = power_gain_table[a_band][pwr_index].tx_gain;
- dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
-
- /* fill each CCK rate's iwl3945_channel_power_info structure
- * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
- * NOTE: CCK rates start at end of OFDM rates! */
- for (rate_index = 0;
- rate_index < IWL_CCK_RATES; rate_index++) {
- pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
- pwr_info->requested_power = power;
- pwr_info->power_table_index = pwr_index;
- pwr_info->base_power_index = base_pwr_index;
- pwr_info->tpc.tx_gain = gain;
- pwr_info->tpc.dsp_atten = dsp_atten;
- }
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_index = 0;
- scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
- s32 actual_index = (scan_tbl_index == 0) ?
- IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
- iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
- actual_index, clip_pwrs, ch_info, a_band);
- }
- }
-
- return 0;
-}
-
-int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
-{
- int rc;
-
- iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
- rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
- FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
- if (rc < 0)
- IWL_ERR(priv, "Can't stop Rx DMA.\n");
-
- return 0;
-}
-
-int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
- int txq_id = txq->q.id;
-
- struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
-
- shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
-
- iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
- iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
-
- iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
- FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-
- /* fake read to flush all prev. writes */
- iwl_read32(priv, FH39_TSSR_CBB_BASE);
-
- return 0;
-}
-
-/*
- * HCMD utils
- */
-static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return sizeof(struct iwl3945_rxon_cmd);
- case POWER_TABLE_CMD:
- return sizeof(struct iwl3945_powertable_cmd);
- default:
- return len;
- }
-}
-
-
-static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
- struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cpu_to_le16(0);
- addsta->rate_n_flags = cmd->rate_n_flags;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-
- return (u16)sizeof(struct iwl3945_addsta_cmd);
-}
-
-static int iwl3945_add_bssid_station(struct iwl_priv *priv,
- const u8 *addr, u8 *sta_id_r)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- int ret;
- u8 sta_id;
- unsigned long flags;
-
- if (sta_id_r)
- *sta_id_r = IWL_INVALID_STATION;
-
- ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
- if (ret) {
- IWL_ERR(priv, "Unable to add station %pM\n", addr);
- return ret;
- }
-
- if (sta_id_r)
- *sta_id_r = sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].used |= IWL_STA_LOCAL;
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return 0;
-}
-static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
- struct ieee80211_vif *vif, bool add)
-{
- struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
- int ret;
-
- if (add) {
- ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid,
- &vif_priv->ibss_bssid_sta_id);
- if (ret)
- return ret;
-
- iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
- (priv->band == IEEE80211_BAND_5GHZ) ?
- IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
- iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
-
- return 0;
- }
-
- return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
- vif->bss_conf.bssid);
-}
-
-/**
- * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
- */
-int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
-{
- int rc, i, index, prev_index;
- struct iwl3945_rate_scaling_cmd rate_cmd = {
- .reserved = {0, 0, 0},
- };
- struct iwl3945_rate_scaling_info *table = rate_cmd.table;
-
- for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
- index = iwl3945_rates[i].table_rs_index;
-
- table[index].rate_n_flags =
- iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
- table[index].try_cnt = priv->retry_rate;
- prev_index = iwl3945_get_prev_ieee_rate(i);
- table[index].next_rate_index =
- iwl3945_rates[prev_index].table_rs_index;
- }
-
- switch (priv->band) {
- case IEEE80211_BAND_5GHZ:
- IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
- /* If one of the following CCK rates is used,
- * have it fall back to the 6M OFDM rate */
- for (i = IWL_RATE_1M_INDEX_TABLE;
- i <= IWL_RATE_11M_INDEX_TABLE; i++)
- table[i].next_rate_index =
- iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
-
- /* Don't fall back to CCK rates */
- table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
- IWL_RATE_9M_INDEX_TABLE;
-
- /* Don't drop out of OFDM rates */
- table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
- iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
- break;
-
- case IEEE80211_BAND_2GHZ:
- IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
- /* If an OFDM rate is used, have it fall back to the
- * 1M CCK rates */
-
- if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
- iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-
- index = IWL_FIRST_CCK_RATE;
- for (i = IWL_RATE_6M_INDEX_TABLE;
- i <= IWL_RATE_54M_INDEX_TABLE; i++)
- table[i].next_rate_index =
- iwl3945_rates[index].table_rs_index;
-
- index = IWL_RATE_11M_INDEX_TABLE;
- /* CCK shouldn't fall back to OFDM... */
- table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
- }
- break;
-
- default:
- WARN_ON(1);
- break;
- }
-
- /* Update the rate scaling for control frame Tx */
- rate_cmd.table_id = 0;
- rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
- if (rc)
- return rc;
-
- /* Update the rate scaling for data frame Tx */
- rate_cmd.table_id = 1;
- return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
-}
-
-/* Called when initializing driver */
-int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
-{
- memset((void *)&priv->hw_params, 0,
- sizeof(struct iwl_hw_params));
-
- priv->_3945.shared_virt =
- dma_alloc_coherent(&priv->pci_dev->dev,
- sizeof(struct iwl3945_shared),
- &priv->_3945.shared_phys, GFP_KERNEL);
- if (!priv->_3945.shared_virt) {
- IWL_ERR(priv, "failed to allocate pci memory\n");
- return -ENOMEM;
- }
-
- /* Assign number of Usable TX queues */
- priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
-
- priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
- priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
- priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
- priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- priv->hw_params.max_stations = IWL3945_STATION_COUNT;
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID;
-
- priv->sta_key_max_num = STA_KEY_MAX_NUM;
-
- priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
- priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
- priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl3945_frame *frame, u8 rate)
-{
- struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
- unsigned int frame_size;
-
- tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
- tx_beacon_cmd->tx.sta_id =
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
- tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- frame_size = iwl3945_fill_beacon_frame(priv,
- tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
- BUG_ON(frame_size > MAX_MPDU_SIZE);
- tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
- tx_beacon_cmd->tx.rate = rate;
- tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
- TX_CMD_FLG_TSF_MSK);
-
- /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
- tx_beacon_cmd->tx.supp_rates[0] =
- (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
- tx_beacon_cmd->tx.supp_rates[1] =
- (IWL_CCK_BASIC_RATES_MASK & 0xF);
-
- return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
-}
-
-void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
-{
- priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
- priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
-}
-
-void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
-{
- INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
- iwl3945_bg_reg_txpower_periodic);
-}
-
-void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
-{
- cancel_delayed_work(&priv->_3945.thermal_periodic);
-}
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl3945_verify_bsm(struct iwl_priv *priv)
- {
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- u32 reg;
- u32 val;
-
- IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = iwl_read_prph(priv, reg);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-
-/******************************************************************************
- *
- * EEPROM related functions
- *
- ******************************************************************************/
-
-/*
- * Clear the OWNER_MSK, to establish driver (instead of uCode running on
- * embedded controller) as EEPROM reader; each read is a series of pulses
- * to/from the EEPROM chip, not a single event, so even reads could conflict
- * if they weren't arbitrated by some ownership mechanism. Here, the driver
- * simply claims ownership, which should be safe when this function is called
- * (i.e. before loading uCode!).
- */
-static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
-{
- _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
- return 0;
-}
-
-
-static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
-{
- return;
-}
-
- /**
- * iwl3945_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl3945_load_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int rc;
- int i;
- u32 done;
- u32 reg_offset;
-
- IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IWL39_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
- * NOTE: iwl3945_initialize_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache. */
- pinst = priv->ucode_init.p_addr;
- pdata = priv->ucode_init_data.p_addr;
- inst_len = priv->ucode_init.len;
- data_len = priv->ucode_init_data.len;
-
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _iwl_write_prph(priv, reg_offset,
- le32_to_cpu(*image));
-
- rc = iwl3945_verify_bsm(priv);
- if (rc)
- return rc;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
- iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
- IWL39_RTC_INST_LOWER_BOUND);
- iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
- else {
- IWL_ERR(priv, "BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- iwl_write_prph(priv, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START_EN);
-
- return 0;
-}
-
-static struct iwl_hcmd_ops iwl3945_hcmd = {
- .rxon_assoc = iwl3945_send_rxon_assoc,
- .commit_rxon = iwl3945_commit_rxon,
- .send_bt_config = iwl_send_bt_config,
-};
-
-static struct iwl_lib_ops iwl3945_lib = {
- .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = iwl3945_hw_txq_free_tfd,
- .txq_init = iwl3945_hw_tx_queue_init,
- .load_ucode = iwl3945_load_bsm,
- .dump_nic_event_log = iwl3945_dump_nic_event_log,
- .dump_nic_error_log = iwl3945_dump_nic_error_log,
- .apm_ops = {
- .init = iwl3945_apm_init,
- .config = iwl3945_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
- .release_semaphore = iwl3945_eeprom_release_semaphore,
- .query_addr = iwlcore_eeprom_query_addr,
- },
- .send_tx_power = iwl3945_send_tx_power,
- .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
- .isr_ops = {
- .isr = iwl_isr_legacy,
- },
-
- .debugfs_ops = {
- .rx_stats_read = iwl3945_ucode_rx_stats_read,
- .tx_stats_read = iwl3945_ucode_tx_stats_read,
- .general_stats_read = iwl3945_ucode_general_stats_read,
- },
-};
-
-static const struct iwl_legacy_ops iwl3945_legacy_ops = {
- .post_associate = iwl3945_post_associate,
- .config_ap = iwl3945_config_ap,
- .manage_ibss_station = iwl3945_manage_ibss_station,
-};
-
-static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
- .get_hcmd_size = iwl3945_get_hcmd_size,
- .build_addsta_hcmd = iwl3945_build_addsta_hcmd,
- .tx_cmd_protection = iwl_legacy_tx_cmd_protection,
- .request_scan = iwl3945_request_scan,
- .post_scan = iwl3945_post_scan,
-};
-
-static const struct iwl_ops iwl3945_ops = {
- .lib = &iwl3945_lib,
- .hcmd = &iwl3945_hcmd,
- .utils = &iwl3945_hcmd_utils,
- .led = &iwl3945_led_ops,
- .legacy = &iwl3945_legacy_ops,
- .ieee80211_ops = &iwl3945_hw_ops,
-};
-
-static struct iwl_base_params iwl3945_base_params = {
- .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
- .num_of_queues = IWL39_NUM_QUEUES,
- .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
- .set_l0s = false,
- .use_bsm = true,
- .use_isr_legacy = true,
- .led_compensation = 64,
- .broken_powersave = true,
- .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
- .wd_timeout = IWL_DEF_WD_TIMEOUT,
- .max_event_log_size = 512,
- .tx_power_by_driver = true,
-};
-
-static struct iwl_cfg iwl3945_bg_cfg = {
- .name = "3945BG",
- .fw_name_pre = IWL3945_FW_PRE,
- .ucode_api_max = IWL3945_UCODE_API_MAX,
- .ucode_api_min = IWL3945_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params,
- .base_params = &iwl3945_base_params,
- .led_mode = IWL_LED_BLINK,
-};
-
-static struct iwl_cfg iwl3945_abg_cfg = {
- .name = "3945ABG",
- .fw_name_pre = IWL3945_FW_PRE,
- .ucode_api_max = IWL3945_UCODE_API_MAX,
- .ucode_api_min = IWL3945_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &iwl3945_ops,
- .mod_params = &iwl3945_mod_params,
- .base_params = &iwl3945_base_params,
- .led_mode = IWL_LED_BLINK,
-};
-
-DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
- {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
- {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
- {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
deleted file mode 100644
index 3eef1eb..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945.h) for driver implementation definitions.
- * Please use iwl-3945-commands.h for uCode API definitions.
- * Please use iwl-3945-hw.h for hardware-related definitions.
- */
-
-#ifndef __iwl_3945_h__
-#define __iwl_3945_h__
-
-#include <linux/pci.h> /* for struct pci_device_id */
-#include <linux/kernel.h>
-#include <net/ieee80211_radiotap.h>
-
-/* Hardware specific file defines the PCI IDs table for that hardware module */
-extern const struct pci_device_id iwl3945_hw_card_ids[];
-
-#include "iwl-csr.h"
-#include "iwl-prph.h"
-#include "iwl-fh.h"
-#include "iwl-3945-hw.h"
-#include "iwl-debug.h"
-#include "iwl-power.h"
-#include "iwl-dev.h"
-#include "iwl-led.h"
-
-/* Highest firmware API version supported */
-#define IWL3945_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL3945_UCODE_API_MIN 1
-
-#define IWL3945_FW_PRE "iwlwifi-3945-"
-#define _IWL3945_MODULE_FIRMWARE(api) IWL3945_FW_PRE #api ".ucode"
-#define IWL3945_MODULE_FIRMWARE(api) _IWL3945_MODULE_FIRMWARE(api)
-
-/* Default noise level to report when noise measurement is not available.
- * This may be because we're:
- * 1) Not associated (4965, no beacon statistics being sent to driver)
- * 2) Scanning (noise measurement does not apply to associated channel)
- * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
- * Use default noise value of -127 ... this is below the range of measurable
- * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
- * Also, -127 works better than 0 when averaging frames with/without
- * noise info (e.g. averaging might be done in app); measured dBm values are
- * always negative ... using a negative value as the default keeps all
- * averages within an s8's (used in some apps) range of negative values. */
-#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
-
-/* Module parameters accessible from iwl-*.c */
-extern struct iwl_mod_params iwl3945_mod_params;
-
-struct iwl3945_rate_scale_data {
- u64 data;
- s32 success_counter;
- s32 success_ratio;
- s32 counter;
- s32 average_tpt;
- unsigned long stamp;
-};
-
-struct iwl3945_rs_sta {
- spinlock_t lock;
- struct iwl_priv *priv;
- s32 *expected_tpt;
- unsigned long last_partial_flush;
- unsigned long last_flush;
- u32 flush_time;
- u32 last_tx_packets;
- u32 tx_packets;
- u8 tgg;
- u8 flush_pending;
- u8 start_rate;
- struct timer_list rate_scale_flush;
- struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct dentry *rs_sta_dbgfs_stats_table_file;
-#endif
-
- /* used to be in sta_info */
- int last_txrate_idx;
-};
-
-
-/*
- * The common struct MUST be first because it is shared between
- * 3945 and agn!
- */
-struct iwl3945_sta_priv {
- struct iwl_station_priv_common common;
- struct iwl3945_rs_sta rs_sta;
-};
-
-enum iwl3945_antenna {
- IWL_ANTENNA_DIVERSITY,
- IWL_ANTENNA_MAIN,
- IWL_ANTENNA_AUX
-};
-
-/*
- * RTS threshold here is total size [2347] minus 4 FCS bytes
- * Per spec:
- * a value of 0 means RTS on all data/management packets
- * a value > max MSDU size means no RTS
- * else RTS for data/management frames where MPDU is larger
- * than RTS value.
- */
-#define DEFAULT_RTS_THRESHOLD 2347U
-#define MIN_RTS_THRESHOLD 0U
-#define MAX_RTS_THRESHOLD 2347U
-#define MAX_MSDU_SIZE 2304U
-#define MAX_MPDU_SIZE 2346U
-#define DEFAULT_BEACON_INTERVAL 100U
-#define DEFAULT_SHORT_RETRY_LIMIT 7U
-#define DEFAULT_LONG_RETRY_LIMIT 4U
-
-#define IWL_TX_FIFO_AC0 0
-#define IWL_TX_FIFO_AC1 1
-#define IWL_TX_FIFO_AC2 2
-#define IWL_TX_FIFO_AC3 3
-#define IWL_TX_FIFO_HCCA_1 5
-#define IWL_TX_FIFO_HCCA_2 6
-#define IWL_TX_FIFO_NONE 7
-
-#define IEEE80211_DATA_LEN 2304
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-struct iwl3945_frame {
- union {
- struct ieee80211_hdr frame;
- struct iwl3945_tx_beacon_cmd beacon;
- u8 raw[IEEE80211_FRAME_LEN];
- u8 cmd[360];
- } u;
- struct list_head list;
-};
-
-#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
-#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
-
-#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
-#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
-#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
-
-#define IWL_SUPPORTED_RATES_IE_LEN 8
-
-#define SCAN_INTERVAL 100
-
-#define MAX_TID_COUNT 9
-
-#define IWL_INVALID_RATE 0xFF
-#define IWL_INVALID_VALUE -1
-
-#define STA_PS_STATUS_WAKE 0
-#define STA_PS_STATUS_SLEEP 1
-
-struct iwl3945_ibss_seq {
- u8 mac[ETH_ALEN];
- u16 seq_num;
- u16 frag_num;
- unsigned long packet_time;
- struct list_head list;
-};
-
-#define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\
- x->u.rx_frame.stats.payload + \
- x->u.rx_frame.stats.phy_count))
-#define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\
- IWL_RX_HDR(x)->payload + \
- le16_to_cpu(IWL_RX_HDR(x)->len)))
-#define IWL_RX_STATS(x) (&x->u.rx_frame.stats)
-#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload)
-
-
-/******************************************************************************
- *
- * Functions implemented in iwl-base.c which are forward declared here
- * for use by iwl-*.c
- *
- *****************************************************************************/
-extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern void iwl3945_rx_replenish(void *data);
-extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
-extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,int left);
-extern int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
- char **buf, bool display);
-extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
-
-/******************************************************************************
- *
- * Functions implemented in iwl-[34]*.c which are forward declared here
- * for use by iwl-base.c
- *
- * NOTE: The implementation of these functions are hardware specific
- * which is why they are in the hardware specific files (vs. iwl-base.c)
- *
- * Naming convention --
- * iwl3945_ <-- Its part of iwlwifi (should be changed to iwl3945_)
- * iwl3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW)
- * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
- * iwl3945_bg_ <-- Called from work queue context
- * iwl3945_mac_ <-- mac80211 callback
- *
- ****************************************************************************/
-extern void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv);
-extern void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv);
-extern void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv);
-extern int iwl3945_hw_rxq_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_set_hw_params(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_init(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_stop_master(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_reset(struct iwl_priv *priv);
-extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- dma_addr_t addr, u16 len,
- u8 reset, u8 pad);
-extern void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
-extern int iwl3945_hw_get_temperature(struct iwl_priv *priv);
-extern int iwl3945_hw_tx_queue_init(struct iwl_priv *priv,
- struct iwl_tx_queue *txq);
-extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
- struct iwl3945_frame *frame, u8 rate);
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id);
-extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv);
-extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power);
-extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb);
-void iwl3945_reply_statistics(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb);
-extern void iwl3945_disable_events(struct iwl_priv *priv);
-extern int iwl4965_get_temperature(const struct iwl_priv *priv);
-extern void iwl3945_post_associate(struct iwl_priv *priv);
-extern void iwl3945_config_ap(struct iwl_priv *priv);
-
-extern int iwl3945_commit_rxon(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx);
-
-/**
- * iwl3945_hw_find_station - Find station id for a given BSSID
- * @bssid: MAC address of station ID to find
- *
- * NOTE: This should not be hardware specific but the code has
- * not yet been merged into a single common layer for managing the
- * station tables.
- */
-extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
-
-extern struct ieee80211_ops iwl3945_hw_ops;
-
-/*
- * Forward declare iwl-3945.c functions for iwl-base.c
- */
-extern __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv);
-extern int iwl3945_init_hw_rate_table(struct iwl_priv *priv);
-extern void iwl3945_reg_txpower_periodic(struct iwl_priv *priv);
-extern int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv);
-
-extern const struct iwl_channel_info *iwl3945_get_channel_info(
- const struct iwl_priv *priv, enum ieee80211_band band, u16 channel);
-
-extern int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate);
-
-/* scanning */
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif);
-void iwl3945_post_scan(struct iwl_priv *priv);
-
-/* rates */
-extern const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945];
-
-/* Requires full declaration of iwl_priv before including */
-#include "iwl-io.h"
-
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
deleted file mode 100644
index 9166794..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-4965-hw.h) only for hardware-related definitions.
- * Use iwl-commands.h for uCode API definitions.
- * Use iwl-dev.h for driver implementation definitions.
- */
-
-#ifndef __iwl_4965_hw_h__
-#define __iwl_4965_hw_h__
-
-#include "iwl-fh.h"
-
-/* EEPROM */
-#define IWL4965_EEPROM_IMG_SIZE 1024
-
-/*
- * uCode queue management definitions ...
- * The first queue used for block-ack aggregation is #7 (4965 only).
- * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
- */
-#define IWL49_FIRST_AMPDU_QUEUE 7
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL49_RTC_INST_LOWER_BOUND (0x000000)
-#define IWL49_RTC_INST_UPPER_BOUND (0x018000)
-
-#define IWL49_RTC_DATA_LOWER_BOUND (0x800000)
-#define IWL49_RTC_DATA_UPPER_BOUND (0x80A000)
-
-#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - \
- IWL49_RTC_INST_LOWER_BOUND)
-#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - \
- IWL49_RTC_DATA_LOWER_BOUND)
-
-#define IWL49_MAX_INST_SIZE IWL49_RTC_INST_SIZE
-#define IWL49_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL49_MAX_BSM_SIZE BSM_SRAM_SIZE
-
-static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
-{
- return (addr >= IWL49_RTC_DATA_LOWER_BOUND) &&
- (addr < IWL49_RTC_DATA_UPPER_BOUND);
-}
-
-/********************* START TEMPERATURE *************************************/
-
-/**
- * 4965 temperature calculation.
- *
- * The driver must calculate the device temperature before calculating
- * a txpower setting (amplifier gain is temperature dependent). The
- * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration
- * values used for the life of the driver, and one of which (R4) is the
- * real-time temperature indicator.
- *
- * uCode provides all 4 values to the driver via the "initialize alive"
- * notification (see struct iwl4965_init_alive_resp). After the runtime uCode
- * image loads, uCode updates the R4 value via statistics notifications
- * (see STATISTICS_NOTIFICATION), which occur after each received beacon
- * when associated, or can be requested via REPLY_STATISTICS_CMD.
- *
- * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver
- * must sign-extend to 32 bits before applying formula below.
- *
- * Formula:
- *
- * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8
- *
- * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is
- * an additional correction, which should be centered around 0 degrees
- * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for
- * centering the 97/100 correction around 0 degrees K.
- *
- * Add 273 to Kelvin value to find degrees Celsius, for comparing current
- * temperature with factory-measured temperatures when calculating txpower
- * settings.
- */
-#define TEMPERATURE_CALIB_KELVIN_OFFSET 8
-#define TEMPERATURE_CALIB_A_VAL 259
-
-/* Limit range of calculated temperature to be between these Kelvin values */
-#define IWL_TX_POWER_TEMPERATURE_MIN (263)
-#define IWL_TX_POWER_TEMPERATURE_MAX (410)
-
-#define IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \
- (((t) < IWL_TX_POWER_TEMPERATURE_MIN) || \
- ((t) > IWL_TX_POWER_TEMPERATURE_MAX))
-
-/********************* END TEMPERATURE ***************************************/
-
-/********************* START TXPOWER *****************************************/
-
-/**
- * 4965 txpower calculations rely on information from three sources:
- *
- * 1) EEPROM
- * 2) "initialize" alive notification
- * 3) statistics notifications
- *
- * EEPROM data consists of:
- *
- * 1) Regulatory information (max txpower and channel usage flags) is provided
- * separately for each channel that can possibly supported by 4965.
- * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz
- * (legacy) channels.
- *
- * See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom
- * for locations in EEPROM.
- *
- * 2) Factory txpower calibration information is provided separately for
- * sub-bands of contiguous channels. 2.4GHz has just one sub-band,
- * but 5 GHz has several sub-bands.
- *
- * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided.
- *
- * See struct iwl4965_eeprom_calib_info (and the tree of structures
- * contained within it) for format, and struct iwl4965_eeprom for
- * locations in EEPROM.
- *
- * "Initialization alive" notification (see struct iwl4965_init_alive_resp)
- * consists of:
- *
- * 1) Temperature calculation parameters.
- *
- * 2) Power supply voltage measurement.
- *
- * 3) Tx gain compensation to balance 2 transmitters for MIMO use.
- *
- * Statistics notifications deliver:
- *
- * 1) Current values for temperature param R4.
- */
-
-/**
- * To calculate a txpower setting for a given desired target txpower, channel,
- * modulation bit rate, and transmitter chain (4965 has 2 transmitters to
- * support MIMO and transmit diversity), driver must do the following:
- *
- * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
- * Do not exceed regulatory limit; reduce target txpower if necessary.
- *
- * If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- * 2 transmitters will be used simultaneously; driver must reduce the
- * regulatory limit by 3 dB (half-power) for each transmitter, so the
- * combined total output of the 2 transmitters is within regulatory limits.
- *
- *
- * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by
- * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]);
- * reduce target txpower if necessary.
- *
- * Backoff values below are in 1/2 dB units (equivalent to steps in
- * txpower gain tables):
- *
- * OFDM 6 - 36 MBit: 10 steps (5 dB)
- * OFDM 48 MBit: 15 steps (7.5 dB)
- * OFDM 54 MBit: 17 steps (8.5 dB)
- * OFDM 60 MBit: 20 steps (10 dB)
- * CCK all rates: 10 steps (5 dB)
- *
- * Backoff values apply to saturation txpower on a per-transmitter basis;
- * when using MIMO (2 transmitters), each transmitter uses the same
- * saturation level provided in EEPROM, and the same backoff values;
- * no reduction (such as with regulatory txpower limits) is required.
- *
- * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel
- * widths and 40 Mhz (.11n HT40) channel widths; there is no separate
- * factory measurement for ht40 channels.
- *
- * The result of this step is the final target txpower. The rest of
- * the steps figure out the proper settings for the device to achieve
- * that target txpower.
- *
- *
- * 3) Determine (EEPROM) calibration sub band for the target channel, by
- * comparing against first and last channels in each sub band
- * (see struct iwl4965_eeprom_calib_subband_info).
- *
- *
- * 4) Linearly interpolate (EEPROM) factory calibration measurement sets,
- * referencing the 2 factory-measured (sample) channels within the sub band.
- *
- * Interpolation is based on difference between target channel's frequency
- * and the sample channels' frequencies. Since channel numbers are based
- * on frequency (5 MHz between each channel number), this is equivalent
- * to interpolating based on channel number differences.
- *
- * Note that the sample channels may or may not be the channels at the
- * edges of the sub band. The target channel may be "outside" of the
- * span of the sampled channels.
- *
- * Driver may choose the pair (for 2 Tx chains) of measurements (see
- * struct iwl4965_eeprom_calib_ch_info) for which the actual measured
- * txpower comes closest to the desired txpower. Usually, though,
- * the middle set of measurements is closest to the regulatory limits,
- * and is therefore a good choice for all txpower calculations (this
- * assumes that high accuracy is needed for maximizing legal txpower,
- * while lower txpower configurations do not need as much accuracy).
- *
- * Driver should interpolate both members of the chosen measurement pair,
- * i.e. for both Tx chains (radio transmitters), unless the driver knows
- * that only one of the chains will be used (e.g. only one tx antenna
- * connected, but this should be unusual). The rate scaling algorithm
- * switches antennas to find best performance, so both Tx chains will
- * be used (although only one at a time) even for non-MIMO transmissions.
- *
- * Driver should interpolate factory values for temperature, gain table
- * index, and actual power. The power amplifier detector values are
- * not used by the driver.
- *
- * Sanity check: If the target channel happens to be one of the sample
- * channels, the results should agree with the sample channel's
- * measurements!
- *
- *
- * 5) Find difference between desired txpower and (interpolated)
- * factory-measured txpower. Using (interpolated) factory gain table index
- * (shown elsewhere) as a starting point, adjust this index lower to
- * increase txpower, or higher to decrease txpower, until the target
- * txpower is reached. Each step in the gain table is 1/2 dB.
- *
- * For example, if factory measured txpower is 16 dBm, and target txpower
- * is 13 dBm, add 6 steps to the factory gain index to reduce txpower
- * by 3 dB.
- *
- *
- * 6) Find difference between current device temperature and (interpolated)
- * factory-measured temperature for sub-band. Factory values are in
- * degrees Celsius. To calculate current temperature, see comments for
- * "4965 temperature calculation".
- *
- * If current temperature is higher than factory temperature, driver must
- * increase gain (lower gain table index), and vice verse.
- *
- * Temperature affects gain differently for different channels:
- *
- * 2.4 GHz all channels: 3.5 degrees per half-dB step
- * 5 GHz channels 34-43: 4.5 degrees per half-dB step
- * 5 GHz channels >= 44: 4.0 degrees per half-dB step
- *
- * NOTE: Temperature can increase rapidly when transmitting, especially
- * with heavy traffic at high txpowers. Driver should update
- * temperature calculations often under these conditions to
- * maintain strong txpower in the face of rising temperature.
- *
- *
- * 7) Find difference between current power supply voltage indicator
- * (from "initialize alive") and factory-measured power supply voltage
- * indicator (EEPROM).
- *
- * If the current voltage is higher (indicator is lower) than factory
- * voltage, gain should be reduced (gain table index increased) by:
- *
- * (eeprom - current) / 7
- *
- * If the current voltage is lower (indicator is higher) than factory
- * voltage, gain should be increased (gain table index decreased) by:
- *
- * 2 * (current - eeprom) / 7
- *
- * If number of index steps in either direction turns out to be > 2,
- * something is wrong ... just use 0.
- *
- * NOTE: Voltage compensation is independent of band/channel.
- *
- * NOTE: "Initialize" uCode measures current voltage, which is assumed
- * to be constant after this initial measurement. Voltage
- * compensation for txpower (number of steps in gain table)
- * may be calculated once and used until the next uCode bootload.
- *
- *
- * 8) If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- * adjust txpower for each transmitter chain, so txpower is balanced
- * between the two chains. There are 5 pairs of tx_atten[group][chain]
- * values in "initialize alive", one pair for each of 5 channel ranges:
- *
- * Group 0: 5 GHz channel 34-43
- * Group 1: 5 GHz channel 44-70
- * Group 2: 5 GHz channel 71-124
- * Group 3: 5 GHz channel 125-200
- * Group 4: 2.4 GHz all channels
- *
- * Add the tx_atten[group][chain] value to the index for the target chain.
- * The values are signed, but are in pairs of 0 and a non-negative number,
- * so as to reduce gain (if necessary) of the "hotter" channel. This
- * avoids any need to double-check for regulatory compliance after
- * this step.
- *
- *
- * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation
- * value to the index:
- *
- * Hardware rev B: 9 steps (4.5 dB)
- * Hardware rev C: 5 steps (2.5 dB)
- *
- * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- * bits [3:2], 1 = B, 2 = C.
- *
- * NOTE: This compensation is in addition to any saturation backoff that
- * might have been applied in an earlier step.
- *
- *
- * 10) Select the gain table, based on band (2.4 vs 5 GHz).
- *
- * Limit the adjusted index to stay within the table!
- *
- *
- * 11) Read gain table entries for DSP and radio gain, place into appropriate
- * location(s) in command (struct iwl4965_txpowertable_cmd).
- */
-
-/**
- * When MIMO is used (2 transmitters operating simultaneously), driver should
- * limit each transmitter to deliver a max of 3 dB below the regulatory limit
- * for the device. That is, use half power for each transmitter, so total
- * txpower is within regulatory limits.
- *
- * The value "6" represents number of steps in gain table to reduce power 3 dB.
- * Each step is 1/2 dB.
- */
-#define IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6)
-
-/**
- * CCK gain compensation.
- *
- * When calculating txpowers for CCK, after making sure that the target power
- * is within regulatory and saturation limits, driver must additionally
- * back off gain by adding these values to the gain table index.
- *
- * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- * bits [3:2], 1 = B, 2 = C.
- */
-#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9)
-#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5)
-
-/*
- * 4965 power supply voltage compensation for txpower
- */
-#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V (7)
-
-/**
- * Gain tables.
- *
- * The following tables contain pair of values for setting txpower, i.e.
- * gain settings for the output of the device's digital signal processor (DSP),
- * and for the analog gain structure of the transmitter.
- *
- * Each entry in the gain tables represents a step of 1/2 dB. Note that these
- * are *relative* steps, not indications of absolute output power. Output
- * power varies with temperature, voltage, and channel frequency, and also
- * requires consideration of average power (to satisfy regulatory constraints),
- * and peak power (to avoid distortion of the output signal).
- *
- * Each entry contains two values:
- * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
- * linear value that multiplies the output of the digital signal processor,
- * before being sent to the analog radio.
- * 2) Radio gain. This sets the analog gain of the radio Tx path.
- * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
- *
- * EEPROM contains factory calibration data for txpower. This maps actual
- * measured txpower levels to gain settings in the "well known" tables
- * below ("well-known" means here that both factory calibration *and* the
- * driver work with the same table).
- *
- * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table
- * has an extension (into negative indexes), in case the driver needs to
- * boost power setting for high device temperatures (higher than would be
- * present during factory calibration). A 5 Ghz EEPROM index of "40"
- * corresponds to the 49th entry in the table used by the driver.
- */
-#define MIN_TX_GAIN_INDEX (0) /* highest gain, lowest idx, 2.4 */
-#define MIN_TX_GAIN_INDEX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */
-
-/**
- * 2.4 GHz gain table
- *
- * Index Dsp gain Radio gain
- * 0 110 0x3f (highest gain)
- * 1 104 0x3f
- * 2 98 0x3f
- * 3 110 0x3e
- * 4 104 0x3e
- * 5 98 0x3e
- * 6 110 0x3d
- * 7 104 0x3d
- * 8 98 0x3d
- * 9 110 0x3c
- * 10 104 0x3c
- * 11 98 0x3c
- * 12 110 0x3b
- * 13 104 0x3b
- * 14 98 0x3b
- * 15 110 0x3a
- * 16 104 0x3a
- * 17 98 0x3a
- * 18 110 0x39
- * 19 104 0x39
- * 20 98 0x39
- * 21 110 0x38
- * 22 104 0x38
- * 23 98 0x38
- * 24 110 0x37
- * 25 104 0x37
- * 26 98 0x37
- * 27 110 0x36
- * 28 104 0x36
- * 29 98 0x36
- * 30 110 0x35
- * 31 104 0x35
- * 32 98 0x35
- * 33 110 0x34
- * 34 104 0x34
- * 35 98 0x34
- * 36 110 0x33
- * 37 104 0x33
- * 38 98 0x33
- * 39 110 0x32
- * 40 104 0x32
- * 41 98 0x32
- * 42 110 0x31
- * 43 104 0x31
- * 44 98 0x31
- * 45 110 0x30
- * 46 104 0x30
- * 47 98 0x30
- * 48 110 0x6
- * 49 104 0x6
- * 50 98 0x6
- * 51 110 0x5
- * 52 104 0x5
- * 53 98 0x5
- * 54 110 0x4
- * 55 104 0x4
- * 56 98 0x4
- * 57 110 0x3
- * 58 104 0x3
- * 59 98 0x3
- * 60 110 0x2
- * 61 104 0x2
- * 62 98 0x2
- * 63 110 0x1
- * 64 104 0x1
- * 65 98 0x1
- * 66 110 0x0
- * 67 104 0x0
- * 68 98 0x0
- * 69 97 0
- * 70 96 0
- * 71 95 0
- * 72 94 0
- * 73 93 0
- * 74 92 0
- * 75 91 0
- * 76 90 0
- * 77 89 0
- * 78 88 0
- * 79 87 0
- * 80 86 0
- * 81 85 0
- * 82 84 0
- * 83 83 0
- * 84 82 0
- * 85 81 0
- * 86 80 0
- * 87 79 0
- * 88 78 0
- * 89 77 0
- * 90 76 0
- * 91 75 0
- * 92 74 0
- * 93 73 0
- * 94 72 0
- * 95 71 0
- * 96 70 0
- * 97 69 0
- * 98 68 0
- */
-
-/**
- * 5 GHz gain table
- *
- * Index Dsp gain Radio gain
- * -9 123 0x3F (highest gain)
- * -8 117 0x3F
- * -7 110 0x3F
- * -6 104 0x3F
- * -5 98 0x3F
- * -4 110 0x3E
- * -3 104 0x3E
- * -2 98 0x3E
- * -1 110 0x3D
- * 0 104 0x3D
- * 1 98 0x3D
- * 2 110 0x3C
- * 3 104 0x3C
- * 4 98 0x3C
- * 5 110 0x3B
- * 6 104 0x3B
- * 7 98 0x3B
- * 8 110 0x3A
- * 9 104 0x3A
- * 10 98 0x3A
- * 11 110 0x39
- * 12 104 0x39
- * 13 98 0x39
- * 14 110 0x38
- * 15 104 0x38
- * 16 98 0x38
- * 17 110 0x37
- * 18 104 0x37
- * 19 98 0x37
- * 20 110 0x36
- * 21 104 0x36
- * 22 98 0x36
- * 23 110 0x35
- * 24 104 0x35
- * 25 98 0x35
- * 26 110 0x34
- * 27 104 0x34
- * 28 98 0x34
- * 29 110 0x33
- * 30 104 0x33
- * 31 98 0x33
- * 32 110 0x32
- * 33 104 0x32
- * 34 98 0x32
- * 35 110 0x31
- * 36 104 0x31
- * 37 98 0x31
- * 38 110 0x30
- * 39 104 0x30
- * 40 98 0x30
- * 41 110 0x25
- * 42 104 0x25
- * 43 98 0x25
- * 44 110 0x24
- * 45 104 0x24
- * 46 98 0x24
- * 47 110 0x23
- * 48 104 0x23
- * 49 98 0x23
- * 50 110 0x22
- * 51 104 0x18
- * 52 98 0x18
- * 53 110 0x17
- * 54 104 0x17
- * 55 98 0x17
- * 56 110 0x16
- * 57 104 0x16
- * 58 98 0x16
- * 59 110 0x15
- * 60 104 0x15
- * 61 98 0x15
- * 62 110 0x14
- * 63 104 0x14
- * 64 98 0x14
- * 65 110 0x13
- * 66 104 0x13
- * 67 98 0x13
- * 68 110 0x12
- * 69 104 0x08
- * 70 98 0x08
- * 71 110 0x07
- * 72 104 0x07
- * 73 98 0x07
- * 74 110 0x06
- * 75 104 0x06
- * 76 98 0x06
- * 77 110 0x05
- * 78 104 0x05
- * 79 98 0x05
- * 80 110 0x04
- * 81 104 0x04
- * 82 98 0x04
- * 83 110 0x03
- * 84 104 0x03
- * 85 98 0x03
- * 86 110 0x02
- * 87 104 0x02
- * 88 98 0x02
- * 89 110 0x01
- * 90 104 0x01
- * 91 98 0x01
- * 92 110 0x00
- * 93 104 0x00
- * 94 98 0x00
- * 95 93 0x00
- * 96 88 0x00
- * 97 83 0x00
- * 98 78 0x00
- */
-
-
-/**
- * Sanity checks and default values for EEPROM regulatory levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Regulatory limits refer to the maximum average txpower allowed by
- * regulatory agencies in the geographies in which the device is meant
- * to be operated. These limits are SKU-specific (i.e. geography-specific),
- * and channel-specific; each channel has an individual regulatory limit
- * listed in the EEPROM.
- *
- * Units are in half-dBm (i.e. "34" means 17 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_REGULATORY_24 (34)
-#define IWL_TX_POWER_DEFAULT_REGULATORY_52 (34)
-#define IWL_TX_POWER_REGULATORY_MIN (0)
-#define IWL_TX_POWER_REGULATORY_MAX (34)
-
-/**
- * Sanity checks and default values for EEPROM saturation levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Saturation is the highest level that the output power amplifier can produce
- * without significant clipping distortion. This is a "peak" power level.
- * Different types of modulation (i.e. various "rates", and OFDM vs. CCK)
- * require differing amounts of backoff, relative to their average power output,
- * in order to avoid clipping distortion.
- *
- * Driver must make sure that it is violating neither the saturation limit,
- * nor the regulatory limit, when calculating Tx power settings for various
- * rates.
- *
- * Units are in half-dBm (i.e. "38" means 19 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_SATURATION_24 (38)
-#define IWL_TX_POWER_DEFAULT_SATURATION_52 (38)
-#define IWL_TX_POWER_SATURATION_MIN (20)
-#define IWL_TX_POWER_SATURATION_MAX (50)
-
-/**
- * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance)
- * and thermal Txpower calibration.
- *
- * When calculating txpower, driver must compensate for current device
- * temperature; higher temperature requires higher gain. Driver must calculate
- * current temperature (see "4965 temperature calculation"), then compare vs.
- * factory calibration temperature in EEPROM; if current temperature is higher
- * than factory temperature, driver must *increase* gain by proportions shown
- * in table below. If current temperature is lower than factory, driver must
- * *decrease* gain.
- *
- * Different frequency ranges require different compensation, as shown below.
- */
-/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR1_FCH 34
-#define CALIB_IWL_TX_ATTEN_GR1_LCH 43
-
-/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR2_FCH 44
-#define CALIB_IWL_TX_ATTEN_GR2_LCH 70
-
-/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR3_FCH 71
-#define CALIB_IWL_TX_ATTEN_GR3_LCH 124
-
-/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR4_FCH 125
-#define CALIB_IWL_TX_ATTEN_GR4_LCH 200
-
-/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR5_FCH 1
-#define CALIB_IWL_TX_ATTEN_GR5_LCH 20
-
-enum {
- CALIB_CH_GROUP_1 = 0,
- CALIB_CH_GROUP_2 = 1,
- CALIB_CH_GROUP_3 = 2,
- CALIB_CH_GROUP_4 = 3,
- CALIB_CH_GROUP_5 = 4,
- CALIB_CH_GROUP_MAX
-};
-
-/********************* END TXPOWER *****************************************/
-
-
-/**
- * Tx/Rx Queues
- *
- * Most communication between driver and 4965 is via queues of data buffers.
- * For example, all commands that the driver issues to device's embedded
- * controller (uCode) are via the command queue (one of the Tx queues). All
- * uCode command responses/replies/notifications, including Rx frames, are
- * conveyed from uCode to driver via the Rx queue.
- *
- * Most support for these queues, including handshake support, resides in
- * structures in host DRAM, shared between the driver and the device. When
- * allocating this memory, the driver must make sure that data written by
- * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's
- * cache memory), so DRAM and cache are consistent, and the device can
- * immediately see changes made by the driver.
- *
- * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via
- * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array
- * in DRAM containing 256 Transmit Frame Descriptors (TFDs).
- */
-#define IWL49_NUM_FIFOS 7
-#define IWL49_CMD_FIFO_NUM 4
-#define IWL49_NUM_QUEUES 16
-#define IWL49_NUM_AMPDU_QUEUES 8
-
-
-/**
- * struct iwl4965_schedq_bc_tbl
- *
- * Byte Count table
- *
- * Each Tx queue uses a byte-count table containing 320 entries:
- * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that
- * duplicate the first 64 entries (to avoid wrap-around within a Tx window;
- * max Tx window is 64 TFDs).
- *
- * When driver sets up a new TFD, it must also enter the total byte count
- * of the frame to be transmitted into the corresponding entry in the byte
- * count table for the chosen Tx queue. If the TFD index is 0-63, the driver
- * must duplicate the byte count entry in corresponding index 256-319.
- *
- * padding puts each byte count table on a 1024-byte boundary;
- * 4965 assumes tables are separated by 1024 bytes.
- */
-struct iwl4965_scd_bc_tbl {
- __le16 tfd_offset[TFD_QUEUE_BC_SIZE];
- u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)];
-} __packed;
-
-#endif /* !__iwl_4965_hw_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
deleted file mode 100644
index 8998ed1..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ /dev/null
@@ -1,2666 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-agn-calib.h"
-#include "iwl-sta.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn.h"
-#include "iwl-agn-debugfs.h"
-#include "iwl-legacy.h"
-
-static int iwl4965_send_tx_power(struct iwl_priv *priv);
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
-
-/* Highest firmware API version supported */
-#define IWL4965_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL4965_UCODE_API_MIN 2
-
-#define IWL4965_FW_PRE "iwlwifi-4965-"
-#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
-#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl4965_verify_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- u32 reg;
- u32 val;
-
- IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = iwl_read_prph(priv, reg);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-/**
- * iwl4965_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl4965_load_bsm(struct iwl_priv *priv)
-{
- __le32 *image = priv->ucode_boot.v_addr;
- u32 len = priv->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int i;
- u32 done;
- u32 reg_offset;
- int ret;
-
- IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
- priv->ucode_type = UCODE_RT;
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IWL49_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
- * NOTE: iwl_init_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache.
- */
- pinst = priv->ucode_init.p_addr >> 4;
- pdata = priv->ucode_init_data.p_addr >> 4;
- inst_len = priv->ucode_init.len;
- data_len = priv->ucode_init_data.len;
-
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
-
- ret = iwl4965_verify_bsm(priv);
- if (ret)
- return ret;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
- iwl_write_prph(priv, BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
- iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
- else {
- IWL_ERR(priv, "BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
-
-
- return 0;
-}
-
-/**
- * iwl4965_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
- int ret = 0;
-
- /* bits 35:4 for 4965 */
- pinst = priv->ucode_code.p_addr >> 4;
- pdata = priv->ucode_data_backup.p_addr >> 4;
-
- /* Tell bootstrap uCode where to find image to load */
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
- priv->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
- priv->ucode_code.len | BSM_DRAM_INST_LOAD);
- IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
- return ret;
-}
-
-/**
- * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * The 4965 "initialize" ALIVE reply contains calibration data for:
- * Voltage, temperature, and MIMO tx gain correction, now stored in priv
- * (3945 does not contain this data).
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
-*/
-static void iwl4965_init_alive_start(struct iwl_priv *priv)
-{
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Calculate temperature */
- priv->temperature = iwl4965_hw_get_temperature(priv);
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- if (iwl4965_set_ucode_ptrs(priv)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
-restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-static bool is_ht40_channel(__le32 rxon_flags)
-{
- int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- return ((chan_mod == CHANNEL_MODE_PURE_40) ||
- (chan_mod == CHANNEL_MODE_MIXED));
-}
-
-/*
- * EEPROM handlers
- */
-static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
-{
- return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
-}
-
-/*
- * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
- * must be called under priv->lock and mac access
- */
-static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
-{
- iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
-}
-
-static void iwl4965_nic_config(struct iwl_priv *priv)
-{
- unsigned long flags;
- u16 radio_cfg;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
-
- /* write radio config values to register */
- if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
- EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
- EEPROM_RF_CFG_DASH_MSK(radio_cfg));
-
- /* set CSR_HW_CONFIG_REG for uCode use */
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
- priv->calib_info = (struct iwl_eeprom_calib_info *)
- iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
- * Called after every association, but this runs only once!
- * ... once chain noise is calibrated the first time, it's good forever. */
-static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
-{
- struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
-
- if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
- iwl_is_any_associated(priv)) {
- struct iwl_calib_diff_gain_cmd cmd;
-
- /* clear data for chain noise calibration algorithm */
- data->chain_noise_a = 0;
- data->chain_noise_b = 0;
- data->chain_noise_c = 0;
- data->chain_signal_a = 0;
- data->chain_signal_b = 0;
- data->chain_signal_c = 0;
- data->beacon_count = 0;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = 0;
- cmd.diff_gain_b = 0;
- cmd.diff_gain_c = 0;
- if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd))
- IWL_ERR(priv,
- "Could not send REPLY_PHY_CALIBRATION_CMD\n");
- data->state = IWL_CHAIN_NOISE_ACCUMULATE;
- IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
- }
-}
-
-static void iwl4965_gain_computation(struct iwl_priv *priv,
- u32 *average_noise,
- u16 min_average_noise_antenna_i,
- u32 min_average_noise,
- u8 default_chain)
-{
- int i, ret;
- struct iwl_chain_noise_data *data = &priv->chain_noise_data;
-
- data->delta_gain_code[min_average_noise_antenna_i] = 0;
-
- for (i = default_chain; i < NUM_RX_CHAINS; i++) {
- s32 delta_g = 0;
-
- if (!(data->disconn_array[i]) &&
- (data->delta_gain_code[i] ==
- CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
- delta_g = average_noise[i] - min_average_noise;
- data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
- data->delta_gain_code[i] =
- min(data->delta_gain_code[i],
- (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
-
- data->delta_gain_code[i] =
- (data->delta_gain_code[i] | (1 << 2));
- } else {
- data->delta_gain_code[i] = 0;
- }
- }
- IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n",
- data->delta_gain_code[0],
- data->delta_gain_code[1],
- data->delta_gain_code[2]);
-
- /* Differential gain gets sent to uCode only once */
- if (!data->radio_write) {
- struct iwl_calib_diff_gain_cmd cmd;
- data->radio_write = 1;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = data->delta_gain_code[0];
- cmd.diff_gain_b = data->delta_gain_code[1];
- cmd.diff_gain_c = data->delta_gain_code[2];
- ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IWL_DEBUG_CALIB(priv, "fail sending cmd "
- "REPLY_PHY_CALIBRATION_CMD\n");
-
- /* TODO we might want recalculate
- * rx_chain in rxon cmd */
-
- /* Mark so we run this algo only once! */
- data->state = IWL_CHAIN_NOISE_CALIBRATED;
- }
-}
-
-static void iwl4965_bg_txpower_work(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv,
- txpower_work);
-
- /* If a scan happened to start before we got here
- * then just return; the statistics notification will
- * kick off another scheduled work to compensate for
- * any temperature delta we missed here. */
- if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
-
- /* Regardless of if we are associated, we must reconfigure the
- * TX power since frames can be sent on non-radar channels while
- * not associated */
- iwl4965_send_tx_power(priv);
-
- /* Update last_temperature to keep is_calib_needed from running
- * when it isn't needed... */
- priv->last_temperature = priv->temperature;
-
- mutex_unlock(&priv->mutex);
-}
-
-/*
- * Acquire priv->lock before calling this function !
- */
-static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
-{
- iwl_write_direct32(priv, HBUS_TARG_WRPTR,
- (index & 0xff) | (txq_id << 8));
- iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
-}
-
-/**
- * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
- * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
- * @scd_retry: (1) Indicates queue will be used in aggregation mode
- *
- * NOTE: Acquire priv->lock before calling this function !
- */
-static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- int tx_fifo_id, int scd_retry)
-{
- int txq_id = txq->q.id;
-
- /* Find out whether to activate Tx queue */
- int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
-
- /* Set up and activate */
- iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
- (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
- (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
- (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
- (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
- IWL49_SCD_QUEUE_STTS_REG_MSK);
-
- txq->sched_retry = scd_retry;
-
- IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
- active ? "Activate" : "Deactivate",
- scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
-}
-
-static const s8 default_queue_to_tx_fifo[] = {
- IWL_TX_FIFO_VO,
- IWL_TX_FIFO_VI,
- IWL_TX_FIFO_BE,
- IWL_TX_FIFO_BK,
- IWL49_CMD_FIFO_NUM,
- IWL_TX_FIFO_UNUSED,
- IWL_TX_FIFO_UNUSED,
-};
-
-static int iwl4965_alive_notify(struct iwl_priv *priv)
-{
- u32 a;
- unsigned long flags;
- int i, chan;
- u32 reg_val;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Clear 4965's internal Tx Scheduler data base */
- priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
- a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
- for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
- iwl_write_targ_mem(priv, a, 0);
- for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
- iwl_write_targ_mem(priv, a, 0);
- for (; a < priv->scd_base_addr +
- IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
- iwl_write_targ_mem(priv, a, 0);
-
- /* Tel 4965 where to find Tx byte count tables */
- iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
- priv->scd_bc_tbls.dma >> 10);
-
- /* Enable DMA channel */
- for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
- iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
-
- /* Update FH chicken bits */
- reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
- iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
- reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
-
- /* Disable chain mode for all queues */
- iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
-
- /* Initialize each Tx queue (including the command queue) */
- for (i = 0; i < priv->hw_params.max_txq_num; i++) {
-
- /* TFD circular buffer read/write indexes */
- iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
- iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
-
- /* Max Tx Window size for Scheduler-ACK mode */
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
- (SCD_WIN_SIZE <<
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
- /* Frame limit */
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
- sizeof(u32),
- (SCD_FRAME_LIMIT <<
- IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
- }
- iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
- (1 << priv->hw_params.max_txq_num) - 1);
-
- /* Activate all Tx DMA/FIFO channels */
- priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6));
-
- iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0);
-
- /* make sure all queue are not stopped */
- memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
- for (i = 0; i < 4; i++)
- atomic_set(&priv->queue_stop_count[i], 0);
-
- /* reset to 0 to enable all the queue first */
- priv->txq_ctx_active_msk = 0;
- /* Map each Tx/cmd queue to its corresponding fifo */
- BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
-
- for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
- int ac = default_queue_to_tx_fifo[i];
-
- iwl_txq_ctx_activate(priv, i);
-
- if (ac == IWL_TX_FIFO_UNUSED)
- continue;
-
- iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
- .min_nrg_cck = 97,
- .max_nrg_cck = 0, /* not used, set to 0 */
-
- .auto_corr_min_ofdm = 85,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 220,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- .auto_corr_max_ofdm_x1 = 140,
- .auto_corr_max_ofdm_mrc_x1 = 270,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 200,
- .auto_corr_max_cck_mrc = 400,
-
- .nrg_th_cck = 100,
- .nrg_th_ofdm = 100,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Kelvin */
- priv->hw_params.ct_kill_threshold =
- CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
-}
-
-/**
- * iwl4965_hw_set_hw_params
- *
- * Called when initializing driver
- */
-static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
-{
- if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
- priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES)
- priv->cfg->base_params->num_of_queues =
- priv->cfg->mod_params->num_of_queues;
-
- priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
- priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
- priv->hw_params.scd_bc_tbls_size =
- priv->cfg->base_params->num_of_queues *
- sizeof(struct iwl4965_scd_bc_tbl);
- priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
- priv->hw_params.max_stations = IWL4965_STATION_COUNT;
- priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID;
- priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
- priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
- priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
-
- priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
- priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
- priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
- priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
-
- iwl4965_set_ct_threshold(priv);
-
- priv->hw_params.sens = &iwl4965_sensitivity;
- priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
-{
- s32 sign = 1;
-
- if (num < 0) {
- sign = -sign;
- num = -num;
- }
- if (denom < 0) {
- sign = -sign;
- denom = -denom;
- }
- *res = 1;
- *res = ((num * 2 + denom) / (denom * 2)) * sign;
-
- return 1;
-}
-
-/**
- * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
- *
- * Determines power supply voltage compensation for txpower calculations.
- * Returns number of 1/2-dB steps to subtract from gain table index,
- * to compensate for difference between power supply voltage during
- * factory measurements, vs. current power supply voltage.
- *
- * Voltage indication is higher for lower voltage.
- * Lower voltage requires more gain (lower gain table index).
- */
-static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
- s32 current_voltage)
-{
- s32 comp = 0;
-
- if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
- (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
- return 0;
-
- iwl4965_math_div_round(current_voltage - eeprom_voltage,
- TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
-
- if (current_voltage > eeprom_voltage)
- comp *= 2;
- if ((comp < -2) || (comp > 2))
- comp = 0;
-
- return comp;
-}
-
-static s32 iwl4965_get_tx_atten_grp(u16 channel)
-{
- if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
- return CALIB_CH_GROUP_5;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
- return CALIB_CH_GROUP_1;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
- return CALIB_CH_GROUP_2;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
- return CALIB_CH_GROUP_3;
-
- if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
- channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
- return CALIB_CH_GROUP_4;
-
- return -1;
-}
-
-static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
-{
- s32 b = -1;
-
- for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
- if (priv->calib_info->band_info[b].ch_from == 0)
- continue;
-
- if ((channel >= priv->calib_info->band_info[b].ch_from)
- && (channel <= priv->calib_info->band_info[b].ch_to))
- break;
- }
-
- return b;
-}
-
-static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
-{
- s32 val;
-
- if (x2 == x1)
- return y1;
- else {
- iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
- return val + y2;
- }
-}
-
-/**
- * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
- *
- * Interpolates factory measurements from the two sample channels within a
- * sub-band, to apply to channel of interest. Interpolation is proportional to
- * differences in channel frequencies, which is proportional to differences
- * in channel number.
- */
-static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
- struct iwl_eeprom_calib_ch_info *chan_info)
-{
- s32 s = -1;
- u32 c;
- u32 m;
- const struct iwl_eeprom_calib_measure *m1;
- const struct iwl_eeprom_calib_measure *m2;
- struct iwl_eeprom_calib_measure *omeas;
- u32 ch_i1;
- u32 ch_i2;
-
- s = iwl4965_get_sub_band(priv, channel);
- if (s >= EEPROM_TX_POWER_BANDS) {
- IWL_ERR(priv, "Tx Power can not find channel %d\n", channel);
- return -1;
- }
-
- ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
- ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
- chan_info->ch_num = (u8) channel;
-
- IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n",
- channel, s, ch_i1, ch_i2);
-
- for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
- for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
- m1 = &(priv->calib_info->band_info[s].ch1.
- measurements[c][m]);
- m2 = &(priv->calib_info->band_info[s].ch2.
- measurements[c][m]);
- omeas = &(chan_info->measurements[c][m]);
-
- omeas->actual_pow =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->actual_pow,
- ch_i2,
- m2->actual_pow);
- omeas->gain_idx =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->gain_idx, ch_i2,
- m2->gain_idx);
- omeas->temperature =
- (u8) iwl4965_interpolate_value(channel, ch_i1,
- m1->temperature,
- ch_i2,
- m2->temperature);
- omeas->pa_det =
- (s8) iwl4965_interpolate_value(channel, ch_i1,
- m1->pa_det, ch_i2,
- m2->pa_det);
-
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
- m1->actual_pow, m2->actual_pow, omeas->actual_pow);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
- m1->gain_idx, m2->gain_idx, omeas->gain_idx);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
- m1->pa_det, m2->pa_det, omeas->pa_det);
- IWL_DEBUG_TXPOWER(priv,
- "chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
- m1->temperature, m2->temperature,
- omeas->temperature);
- }
- }
-
- return 0;
-}
-
-/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
- * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
-static s32 back_off_table[] = {
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
- 10 /* CCK */
-};
-
-/* Thermal compensation values for txpower for various frequency ranges ...
- * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
-static struct iwl4965_txpower_comp_entry {
- s32 degrees_per_05db_a;
- s32 degrees_per_05db_a_denom;
-} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
- {9, 2}, /* group 0 5.2, ch 34-43 */
- {4, 1}, /* group 1 5.2, ch 44-70 */
- {4, 1}, /* group 2 5.2, ch 71-124 */
- {4, 1}, /* group 3 5.2, ch 125-200 */
- {3, 1} /* group 4 2.4, ch all */
-};
-
-static s32 get_min_power_index(s32 rate_power_index, u32 band)
-{
- if (!band) {
- if ((rate_power_index & 7) <= 4)
- return MIN_TX_GAIN_INDEX_52GHZ_EXT;
- }
- return MIN_TX_GAIN_INDEX;
-}
-
-struct gain_entry {
- u8 dsp;
- u8 radio;
-};
-
-static const struct gain_entry gain_table[2][108] = {
- /* 5.2GHz power gain index table */
- {
- {123, 0x3F}, /* highest txpower */
- {117, 0x3F},
- {110, 0x3F},
- {104, 0x3F},
- {98, 0x3F},
- {110, 0x3E},
- {104, 0x3E},
- {98, 0x3E},
- {110, 0x3D},
- {104, 0x3D},
- {98, 0x3D},
- {110, 0x3C},
- {104, 0x3C},
- {98, 0x3C},
- {110, 0x3B},
- {104, 0x3B},
- {98, 0x3B},
- {110, 0x3A},
- {104, 0x3A},
- {98, 0x3A},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x25},
- {104, 0x25},
- {98, 0x25},
- {110, 0x24},
- {104, 0x24},
- {98, 0x24},
- {110, 0x23},
- {104, 0x23},
- {98, 0x23},
- {110, 0x22},
- {104, 0x18},
- {98, 0x18},
- {110, 0x17},
- {104, 0x17},
- {98, 0x17},
- {110, 0x16},
- {104, 0x16},
- {98, 0x16},
- {110, 0x15},
- {104, 0x15},
- {98, 0x15},
- {110, 0x14},
- {104, 0x14},
- {98, 0x14},
- {110, 0x13},
- {104, 0x13},
- {98, 0x13},
- {110, 0x12},
- {104, 0x08},
- {98, 0x08},
- {110, 0x07},
- {104, 0x07},
- {98, 0x07},
- {110, 0x06},
- {104, 0x06},
- {98, 0x06},
- {110, 0x05},
- {104, 0x05},
- {98, 0x05},
- {110, 0x04},
- {104, 0x04},
- {98, 0x04},
- {110, 0x03},
- {104, 0x03},
- {98, 0x03},
- {110, 0x02},
- {104, 0x02},
- {98, 0x02},
- {110, 0x01},
- {104, 0x01},
- {98, 0x01},
- {110, 0x00},
- {104, 0x00},
- {98, 0x00},
- {93, 0x00},
- {88, 0x00},
- {83, 0x00},
- {78, 0x00},
- },
- /* 2.4GHz power gain index table */
- {
- {110, 0x3f}, /* highest txpower */
- {104, 0x3f},
- {98, 0x3f},
- {110, 0x3e},
- {104, 0x3e},
- {98, 0x3e},
- {110, 0x3d},
- {104, 0x3d},
- {98, 0x3d},
- {110, 0x3c},
- {104, 0x3c},
- {98, 0x3c},
- {110, 0x3b},
- {104, 0x3b},
- {98, 0x3b},
- {110, 0x3a},
- {104, 0x3a},
- {98, 0x3a},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x6},
- {104, 0x6},
- {98, 0x6},
- {110, 0x5},
- {104, 0x5},
- {98, 0x5},
- {110, 0x4},
- {104, 0x4},
- {98, 0x4},
- {110, 0x3},
- {104, 0x3},
- {98, 0x3},
- {110, 0x2},
- {104, 0x2},
- {98, 0x2},
- {110, 0x1},
- {104, 0x1},
- {98, 0x1},
- {110, 0x0},
- {104, 0x0},
- {98, 0x0},
- {97, 0},
- {96, 0},
- {95, 0},
- {94, 0},
- {93, 0},
- {92, 0},
- {91, 0},
- {90, 0},
- {89, 0},
- {88, 0},
- {87, 0},
- {86, 0},
- {85, 0},
- {84, 0},
- {83, 0},
- {82, 0},
- {81, 0},
- {80, 0},
- {79, 0},
- {78, 0},
- {77, 0},
- {76, 0},
- {75, 0},
- {74, 0},
- {73, 0},
- {72, 0},
- {71, 0},
- {70, 0},
- {69, 0},
- {68, 0},
- {67, 0},
- {66, 0},
- {65, 0},
- {64, 0},
- {63, 0},
- {62, 0},
- {61, 0},
- {60, 0},
- {59, 0},
- }
-};
-
-static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
- u8 is_ht40, u8 ctrl_chan_high,
- struct iwl4965_tx_power_db *tx_power_tbl)
-{
- u8 saturation_power;
- s32 target_power;
- s32 user_target_power;
- s32 power_limit;
- s32 current_temp;
- s32 reg_limit;
- s32 current_regulatory;
- s32 txatten_grp = CALIB_CH_GROUP_MAX;
- int i;
- int c;
- const struct iwl_channel_info *ch_info = NULL;
- struct iwl_eeprom_calib_ch_info ch_eeprom_info;
- const struct iwl_eeprom_calib_measure *measurement;
- s16 voltage;
- s32 init_voltage;
- s32 voltage_compensation;
- s32 degrees_per_05db_num;
- s32 degrees_per_05db_denom;
- s32 factory_temp;
- s32 temperature_comp[2];
- s32 factory_gain_index[2];
- s32 factory_actual_pwr[2];
- s32 power_index;
-
- /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
- * are used for indexing into txpower table) */
- user_target_power = 2 * priv->tx_power_user_lmt;
-
- /* Get current (RXON) channel, band, width */
- IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band,
- is_ht40);
-
- ch_info = iwl_get_channel_info(priv, priv->band, channel);
-
- if (!is_channel_valid(ch_info))
- return -EINVAL;
-
- /* get txatten group, used to select 1) thermal txpower adjustment
- * and 2) mimo txpower balance between Tx chains. */
- txatten_grp = iwl4965_get_tx_atten_grp(channel);
- if (txatten_grp < 0) {
- IWL_ERR(priv, "Can't find txatten group for channel %d.\n",
- channel);
- return -EINVAL;
- }
-
- IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
- channel, txatten_grp);
-
- if (is_ht40) {
- if (ctrl_chan_high)
- channel -= 2;
- else
- channel += 2;
- }
-
- /* hardware txpower limits ...
- * saturation (clipping distortion) txpowers are in half-dBm */
- if (band)
- saturation_power = priv->calib_info->saturation_power24;
- else
- saturation_power = priv->calib_info->saturation_power52;
-
- if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
- saturation_power > IWL_TX_POWER_SATURATION_MAX) {
- if (band)
- saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
- else
- saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
- }
-
- /* regulatory txpower limits ... reg_limit values are in half-dBm,
- * max_power_avg values are in dBm, convert * 2 */
- if (is_ht40)
- reg_limit = ch_info->ht40_max_power_avg * 2;
- else
- reg_limit = ch_info->max_power_avg * 2;
-
- if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
- (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
- if (band)
- reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
- else
- reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
- }
-
- /* Interpolate txpower calibration values for this channel,
- * based on factory calibration tests on spaced channels. */
- iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
-
- /* calculate tx gain adjustment based on power supply voltage */
- voltage = le16_to_cpu(priv->calib_info->voltage);
- init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
- voltage_compensation =
- iwl4965_get_voltage_compensation(voltage, init_voltage);
-
- IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n",
- init_voltage,
- voltage, voltage_compensation);
-
- /* get current temperature (Celsius) */
- current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
- current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
- current_temp = KELVIN_TO_CELSIUS(current_temp);
-
- /* select thermal txpower adjustment params, based on channel group
- * (same frequency group used for mimo txatten adjustment) */
- degrees_per_05db_num =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
- degrees_per_05db_denom =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
-
- /* get per-chain txpower values from factory measurements */
- for (c = 0; c < 2; c++) {
- measurement = &ch_eeprom_info.measurements[c][1];
-
- /* txgain adjustment (in half-dB steps) based on difference
- * between factory and current temperature */
- factory_temp = measurement->temperature;
- iwl4965_math_div_round((current_temp - factory_temp) *
- degrees_per_05db_denom,
- degrees_per_05db_num,
- &temperature_comp[c]);
-
- factory_gain_index[c] = measurement->gain_idx;
- factory_actual_pwr[c] = measurement->actual_pow;
-
- IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c);
- IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, "
- "curr tmp %d, comp %d steps\n",
- factory_temp, current_temp,
- temperature_comp[c]);
-
- IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n",
- factory_gain_index[c],
- factory_actual_pwr[c]);
- }
-
- /* for each of 33 bit-rates (including 1 for CCK) */
- for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
- u8 is_mimo_rate;
- union iwl4965_tx_power_dual_stream tx_power;
-
- /* for mimo, reduce each chain's txpower by half
- * (3dB, 6 steps), so total output power is regulatory
- * compliant. */
- if (i & 0x8) {
- current_regulatory = reg_limit -
- IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
- is_mimo_rate = 1;
- } else {
- current_regulatory = reg_limit;
- is_mimo_rate = 0;
- }
-
- /* find txpower limit, either hardware or regulatory */
- power_limit = saturation_power - back_off_table[i];
- if (power_limit > current_regulatory)
- power_limit = current_regulatory;
-
- /* reduce user's txpower request if necessary
- * for this rate on this channel */
- target_power = user_target_power;
- if (target_power > power_limit)
- target_power = power_limit;
-
- IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n",
- i, saturation_power - back_off_table[i],
- current_regulatory, user_target_power,
- target_power);
-
- /* for each of 2 Tx chains (radio transmitters) */
- for (c = 0; c < 2; c++) {
- s32 atten_value;
-
- if (is_mimo_rate)
- atten_value =
- (s32)le32_to_cpu(priv->card_alive_init.
- tx_atten[txatten_grp][c]);
- else
- atten_value = 0;
-
- /* calculate index; higher index means lower txpower */
- power_index = (u8) (factory_gain_index[c] -
- (target_power -
- factory_actual_pwr[c]) -
- temperature_comp[c] -
- voltage_compensation +
- atten_value);
-
-/* IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n",
- power_index); */
-
- if (power_index < get_min_power_index(i, band))
- power_index = get_min_power_index(i, band);
-
- /* adjust 5 GHz index to support negative indexes */
- if (!band)
- power_index += 9;
-
- /* CCK, rate 32, reduce txpower for CCK */
- if (i == POWER_TABLE_CCK_ENTRY)
- power_index +=
- IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
-
- /* stay within the table! */
- if (power_index > 107) {
- IWL_WARN(priv, "txpower index %d > 107\n",
- power_index);
- power_index = 107;
- }
- if (power_index < 0) {
- IWL_WARN(priv, "txpower index %d < 0\n",
- power_index);
- power_index = 0;
- }
-
- /* fill txpower command for this rate/chain */
- tx_power.s.radio_tx_gain[c] =
- gain_table[band][power_index].radio;
- tx_power.s.dsp_predis_atten[c] =
- gain_table[band][power_index].dsp;
-
- IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d "
- "gain 0x%02x dsp %d\n",
- c, atten_value, power_index,
- tx_power.s.radio_tx_gain[c],
- tx_power.s.dsp_predis_atten[c]);
- } /* for each chain */
-
- tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
-
- } /* for each rate */
-
- return 0;
-}
-
-/**
- * iwl4965_send_tx_power - Configure the TXPOWER level user limit
- *
- * Uses the active RXON for channel, band, and characteristics (ht40, high)
- * The power limit is taken from priv->tx_power_user_lmt.
- */
-static int iwl4965_send_tx_power(struct iwl_priv *priv)
-{
- struct iwl4965_txpowertable_cmd cmd = { 0 };
- int ret;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- band = priv->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = is_ht40_channel(ctx->active.flags);
-
- if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.channel = ctx->active.channel;
-
- ret = iwl4965_fill_txpower_tbl(priv, band,
- le16_to_cpu(ctx->active.channel),
- is_ht40, ctrl_chan_high, &cmd.tx_power);
- if (ret)
- goto out;
-
- ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
-
-out:
- return ret;
-}
-
-static int iwl4965_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
-{
- int ret = 0;
- struct iwl4965_rxon_assoc_cmd rxon_assoc;
- const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
- const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
- if ((rxon1->flags == rxon2->flags) &&
- (rxon1->filter_flags == rxon2->filter_flags) &&
- (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
- (rxon1->ofdm_ht_single_stream_basic_rates ==
- rxon2->ofdm_ht_single_stream_basic_rates) &&
- (rxon1->ofdm_ht_dual_stream_basic_rates ==
- rxon2->ofdm_ht_dual_stream_basic_rates) &&
- (rxon1->rx_chain == rxon2->rx_chain) &&
- (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
- IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
- rxon_assoc.ofdm_ht_single_stream_basic_rates =
- ctx->staging.ofdm_ht_single_stream_basic_rates;
- rxon_assoc.ofdm_ht_dual_stream_basic_rates =
- ctx->staging.ofdm_ht_dual_stream_basic_rates;
- rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
-
- ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
- sizeof(rxon_assoc), &rxon_assoc, NULL);
- if (ret)
- return ret;
-
- return ret;
-}
-
-static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active;
- int ret;
- bool new_assoc =
- !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (!iwl_is_alive(priv))
- return -EBUSY;
-
- if (!ctx->is_active)
- return 0;
-
- /* always get timestamp with Rx frame */
- ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
-
- ret = iwl_check_rxon_cmd(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /*
- * receive commit_rxon request
- * abort any previous channel switch if still in process
- */
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
- IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
- iwl_chswitch_done(priv, false);
- }
-
- /* If we don't need to send a full RXON, we can use
- * iwl_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!iwl_full_rxon_required(priv, ctx)) {
- ret = iwl_send_rxon_assoc(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
- return ret;
- }
-
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- iwl_print_rx_config_cmd(priv, ctx);
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (iwl_is_associated_ctx(ctx) && new_assoc) {
- IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd),
- active_rxon);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (ret) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
- return ret;
- }
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
-
- IWL_DEBUG_INFO(priv, "Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(ctx->staging.channel),
- ctx->staging.bssid_addr);
-
- iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
-
- /* Apply the new configuration
- * RXON unassoc clears the station table in uCode so restoration of
- * stations is needed after it (the RXON command) completes
- */
- if (!new_assoc) {
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- iwl_clear_ucode_stations(priv, ctx);
- iwl_restore_stations(priv, ctx);
- ret = iwl_restore_default_wep_keys(priv, ctx);
- if (ret) {
- IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
- if (new_assoc) {
- priv->start_calib = 0;
- /* Apply the new configuration
- * RXON assoc doesn't clear the station table in uCode,
- */
- ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
- sizeof(struct iwl_rxon_cmd), &ctx->staging);
- if (ret) {
- IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
- return ret;
- }
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- }
- iwl_print_rx_config_cmd(priv, ctx);
-
- iwl_init_sensitivity(priv);
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
- if (ret) {
- IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static int iwl4965_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- int rc;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct iwl4965_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- band = priv->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = is_ht40_channel(ctx->staging.flags);
-
- if (is_ht40 &&
- (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.expect_beacon = 0;
- ch = ch_switch->channel->hw_value;
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
-
- rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40,
- ctrl_chan_high, &cmd.tx_power);
- if (rc) {
- IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc);
- return rc;
- }
-
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
-}
-
-/**
- * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
- */
-static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
- u16 byte_cnt)
-{
- struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
- int txq_id = txq->q.id;
- int write_ptr = txq->q.write_ptr;
- int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
- __le16 bc_ent;
-
- WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
-
- bc_ent = cpu_to_le16(len & 0xFFF);
- /* Set up byte count within first 256 entries */
- scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
-
- /* If within first 64 entries, duplicate at end */
- if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
- scd_bc_tbl[txq_id].
- tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
-}
-
-/**
- * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
- * @statistics: Provides the temperature reading from the uCode
- *
- * A return of <0 indicates bogus data in the statistics
- */
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
-{
- s32 temperature;
- s32 vt;
- s32 R1, R2, R3;
- u32 R4;
-
- if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
- (priv->_agn.statistics.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
- IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n");
- R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
- R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
- R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
- R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
- } else {
- IWL_DEBUG_TEMP(priv, "Running temperature calibration\n");
- R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
- R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
- R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
- R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
- }
-
- /*
- * Temperature is only 23 bits, so sign extend out to 32.
- *
- * NOTE If we haven't received a statistics notification yet
- * with an updated temperature, use R4 provided to us in the
- * "initialize" ALIVE response.
- */
- if (!test_bit(STATUS_TEMPERATURE, &priv->status))
- vt = sign_extend32(R4, 23);
- else
- vt = sign_extend32(le32_to_cpu(priv->_agn.statistics.
- general.common.temperature), 23);
-
- IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
-
- if (R3 == R1) {
- IWL_ERR(priv, "Calibration conflict R1 == R3\n");
- return -1;
- }
-
- /* Calculate temperature in degrees Kelvin, adjust by 97%.
- * Add offset to center the adjustment around 0 degrees Centigrade. */
- temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
- temperature /= (R3 - R1);
- temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
-
- IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n",
- temperature, KELVIN_TO_CELSIUS(temperature));
-
- return temperature;
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold. */
-#define IWL_TEMPERATURE_THRESHOLD 3
-
-/**
- * iwl4965_is_temp_calib_needed - determines if new calibration is needed
- *
- * If the temperature changed has changed sufficiently, then a recalibration
- * is needed.
- *
- * Assumes caller will replace priv->last_temperature once calibration
- * executed.
- */
-static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
-{
- int temp_diff;
-
- if (!test_bit(STATUS_STATISTICS, &priv->status)) {
- IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n");
- return 0;
- }
-
- temp_diff = priv->temperature - priv->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
- else
- IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
-
- if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
- IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
- return 0;
- }
-
- IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
-
- return 1;
-}
-
-static void iwl4965_temperature_calib(struct iwl_priv *priv)
-{
- s32 temp;
-
- temp = iwl4965_hw_get_temperature(priv);
- if (temp < 0)
- return;
-
- if (priv->temperature != temp) {
- if (priv->temperature)
- IWL_DEBUG_TEMP(priv, "Temperature changed "
- "from %dC to %dC\n",
- KELVIN_TO_CELSIUS(priv->temperature),
- KELVIN_TO_CELSIUS(temp));
- else
- IWL_DEBUG_TEMP(priv, "Temperature "
- "initialized to %dC\n",
- KELVIN_TO_CELSIUS(temp));
- }
-
- priv->temperature = temp;
- iwl_tt_handler(priv);
- set_bit(STATUS_TEMPERATURE, &priv->status);
-
- if (!priv->disable_tx_power_cal &&
- unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
- iwl4965_is_temp_calib_needed(priv))
- queue_work(priv->workqueue, &priv->txpower_work);
-}
-
-/**
- * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
- */
-static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
- u16 txq_id)
-{
- /* Simply stop the queue, but don't change any configuration;
- * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
- iwl_write_prph(priv,
- IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
- (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
- (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
-}
-
-/**
- * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
- * priv->lock must be held by the caller
- */
-static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
- u16 ssn_idx, u8 tx_fifo)
-{
- if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
- (IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
- IWL_WARN(priv,
- "queue number out of range: %d, must be %d to %d\n",
- txq_id, IWL49_FIRST_AMPDU_QUEUE,
- IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues - 1);
- return -EINVAL;
- }
-
- iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
- iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
- priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
- priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
- /* supposes that ssn_idx is valid (!= 0xFFF) */
- iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
- iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
- iwl_txq_ctx_deactivate(priv, txq_id);
- iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
-
- return 0;
-}
-
-/**
- * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
- */
-static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
- u16 txq_id)
-{
- u32 tbl_dw_addr;
- u32 tbl_dw;
- u16 scd_q2ratid;
-
- scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
-
- tbl_dw_addr = priv->scd_base_addr +
- IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
-
- tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
-
- if (txq_id & 0x1)
- tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
- else
- tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
-
- iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
-
- return 0;
-}
-
-
-/**
- * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
- *
- * NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
- * i.e. it must be one of the higher queues used for aggregation
- */
-static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
- int tx_fifo, int sta_id, int tid, u16 ssn_idx)
-{
- unsigned long flags;
- u16 ra_tid;
- int ret;
-
- if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
- (IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
- IWL_WARN(priv,
- "queue number out of range: %d, must be %d to %d\n",
- txq_id, IWL49_FIRST_AMPDU_QUEUE,
- IWL49_FIRST_AMPDU_QUEUE +
- priv->cfg->base_params->num_of_ampdu_queues - 1);
- return -EINVAL;
- }
-
- ra_tid = BUILD_RAxTID(sta_id, tid);
-
- /* Modify device's station table to Tx this TID */
- ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
- if (ret)
- return ret;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Stop this Tx queue before configuring it */
- iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
- /* Map receiver-address / traffic-ID to this queue */
- iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
-
- /* Set this queue as a chain-building queue */
- iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
- /* Place first TFD at index corresponding to start sequence number.
- * Assumes that ssn_idx is valid (!= 0xFFF) */
- priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
- priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
- iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
- /* Set up Tx window size and frame limit for this queue */
- iwl_write_targ_mem(priv,
- priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
- (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
- IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
- iwl_write_targ_mem(priv, priv->scd_base_addr +
- IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
- (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
- & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
- iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
-
- /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
- iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return 0;
-}
-
-
-static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return (u16) sizeof(struct iwl4965_rxon_cmd);
- default:
- return len;
- }
-}
-
-static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
- struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cmd->tid_disable_tx;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
- addsta->sleep_tx_count = cmd->sleep_tx_count;
- addsta->reserved1 = cpu_to_le16(0);
- addsta->reserved2 = cpu_to_le16(0);
-
- return (u16)sizeof(struct iwl4965_addsta_cmd);
-}
-
-static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
-{
- return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
-}
-
-/**
- * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
- */
-static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
- struct iwl_ht_agg *agg,
- struct iwl4965_tx_resp *tx_resp,
- int txq_id, u16 start_idx)
-{
- u16 status;
- struct agg_tx_status *frame_status = tx_resp->u.agg_status;
- struct ieee80211_tx_info *info = NULL;
- struct ieee80211_hdr *hdr = NULL;
- u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
- int i, sh, idx;
- u16 seq;
- if (agg->wait_for_ba)
- IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
-
- agg->frame_count = tx_resp->frame_count;
- agg->start_idx = start_idx;
- agg->rate_n_flags = rate_n_flags;
- agg->bitmap = 0;
-
- /* num frames attempted by Tx command */
- if (agg->frame_count == 1) {
- /* Only one frame was attempted; no block-ack will arrive */
- status = le16_to_cpu(frame_status[0].status);
- idx = start_idx;
-
- /* FIXME: code repetition */
- IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
- agg->frame_count, agg->start_idx, idx);
-
- info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb);
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags &= ~IEEE80211_TX_CTL_AMPDU;
- info->flags |= iwl_tx_status_to_mac80211(status);
- iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
- /* FIXME: code repetition end */
-
- IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
- status & 0xff, tx_resp->failure_frame);
- IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
-
- agg->wait_for_ba = 0;
- } else {
- /* Two or more frames were attempted; expect block-ack */
- u64 bitmap = 0;
- int start = agg->start_idx;
-
- /* Construct bit-map of pending frames within Tx window */
- for (i = 0; i < agg->frame_count; i++) {
- u16 sc;
- status = le16_to_cpu(frame_status[i].status);
- seq = le16_to_cpu(frame_status[i].sequence);
- idx = SEQ_TO_INDEX(seq);
- txq_id = SEQ_TO_QUEUE(seq);
-
- if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
- AGG_TX_STATE_ABORT_MSK))
- continue;
-
- IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
- agg->frame_count, txq_id, idx);
-
- hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
- if (!hdr) {
- IWL_ERR(priv,
- "BUG_ON idx doesn't point to valid skb"
- " idx=%d, txq_id=%d\n", idx, txq_id);
- return -1;
- }
-
- sc = le16_to_cpu(hdr->seq_ctrl);
- if (idx != (SEQ_TO_SN(sc) & 0xff)) {
- IWL_ERR(priv,
- "BUG_ON idx doesn't match seq control"
- " idx=%d, seq_idx=%d, seq=%d\n",
- idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
- return -1;
- }
-
- IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
- i, idx, SEQ_TO_SN(sc));
-
- sh = idx - start;
- if (sh > 64) {
- sh = (start - idx) + 0xff;
- bitmap = bitmap << sh;
- sh = 0;
- start = idx;
- } else if (sh < -64)
- sh = 0xff - (start - idx);
- else if (sh < 0) {
- sh = start - idx;
- start = idx;
- bitmap = bitmap << sh;
- sh = 0;
- }
- bitmap |= 1ULL << sh;
- IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
- start, (unsigned long long)bitmap);
- }
-
- agg->bitmap = bitmap;
- agg->start_idx = start;
- IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
- agg->frame_count, agg->start_idx,
- (unsigned long long)agg->bitmap);
-
- if (bitmap)
- agg->wait_for_ba = 1;
- }
- return 0;
-}
-
-static u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr)
-{
- int i;
- int start = 0;
- int ret = IWL_INVALID_STATION;
- unsigned long flags;
-
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
- (priv->iw_mode == NL80211_IFTYPE_AP))
- start = IWL_STA_ID;
-
- if (is_broadcast_ether_addr(addr))
- return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- for (i = start; i < priv->hw_params.max_stations; i++)
- if (priv->stations[i].used &&
- (!compare_ether_addr(priv->stations[i].sta.sta.addr,
- addr))) {
- ret = i;
- goto out;
- }
-
- IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n",
- addr, priv->num_stations);
-
- out:
- /*
- * It may be possible that more commands interacting with stations
- * arrive before we completed processing the adding of
- * station
- */
- if (ret != IWL_INVALID_STATION &&
- (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
- ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
- (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
- IWL_ERR(priv, "Requested station info for sta %d before ready.\n",
- ret);
- ret = IWL_INVALID_STATION;
- }
- spin_unlock_irqrestore(&priv->sta_lock, flags);
- return ret;
-}
-
-static int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
-{
- if (priv->iw_mode == NL80211_IFTYPE_STATION) {
- return IWL_AP_ID;
- } else {
- u8 *da = ieee80211_get_DA(hdr);
- return iwl_find_station(priv, da);
- }
-}
-
-/**
- * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
- */
-static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int index = SEQ_TO_INDEX(sequence);
- struct iwl_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *info;
- struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->u.status);
- int uninitialized_var(tid);
- int sta_id;
- int freed;
- u8 *qc = NULL;
- unsigned long flags;
-
- if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
- IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- index, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- memset(&info->status, 0, sizeof(info->status));
-
- hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
- if (ieee80211_is_data_qos(hdr->frame_control)) {
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- }
-
- sta_id = iwl_get_ra_sta_id(priv, hdr);
- if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
- IWL_ERR(priv, "Station not known\n");
- return;
- }
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- if (txq->sched_retry) {
- const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
- struct iwl_ht_agg *agg = NULL;
- WARN_ON(!qc);
-
- agg = &priv->stations[sta_id].tid[tid].agg;
-
- iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
-
- /* check if BAR is needed */
- if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
- info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-
- if (txq->q.read_ptr != (scd_ssn & 0xff)) {
- index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
- IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
- "%d index %d\n", scd_ssn , index);
- freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
- if (qc)
- iwl_free_tfds_in_queue(priv, sta_id,
- tid, freed);
-
- if (priv->mac80211_registered &&
- (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
- (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
- iwl_wake_queue(priv, txq);
- }
- } else {
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags |= iwl_tx_status_to_mac80211(status);
- iwlagn_hwrate_to_tx_control(priv,
- le32_to_cpu(tx_resp->rate_n_flags),
- info);
-
- IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) "
- "rate_n_flags 0x%x retries %d\n",
- txq_id,
- iwl_get_tx_fail_reason(status), status,
- le32_to_cpu(tx_resp->rate_n_flags),
- tx_resp->failure_frame);
-
- freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
- else if (sta_id == IWL_INVALID_STATION)
- IWL_DEBUG_TX_REPLY(priv, "Station not known\n");
-
- if (priv->mac80211_registered &&
- (iwl_queue_space(&txq->q) > txq->q.low_mark))
- iwl_wake_queue(priv, txq);
- }
- if (qc && likely(sta_id != IWL_INVALID_STATION))
- iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
-
- iwl_check_abort_status(priv, tx_resp->frame_count, status);
-
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-}
-
-static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
- IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
- "tsf:0x%.8x%.8x rate:%d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
- if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-static int iwl4965_calc_rssi(struct iwl_priv *priv,
- struct iwl_rx_phy_res *rx_resp)
-{
- /* data from PHY/DSP regarding signal strength, etc.,
- * contents are always there, not configurable by host. */
- struct iwl4965_rx_non_cfg_phy *ncphy =
- (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
- u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
- >> IWL49_AGC_DB_POS;
-
- u32 valid_antennae =
- (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
- >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
- u8 max_rssi = 0;
- u32 i;
-
- /* Find max rssi among 3 possible receivers.
- * These values are measured by the digital signal processor (DSP).
- * They should stay fairly constant even as the signal strength varies,
- * if the radio's automatic gain control (AGC) is working right.
- * AGC value (see below) will provide the "interesting" info. */
- for (i = 0; i < 3; i++)
- if (valid_antennae & (1 << i))
- max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
- IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
- ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
- max_rssi, agc);
-
- /* dBm = max_rssi dB - agc dB - constant.
- * Higher AGC (higher radio gain) means lower signal. */
- return max_rssi - agc - IWLAGN_RSSI_OFFSET;
-}
-
-
-/* Set up 4965-specific Rx frame reply handlers */
-static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
-{
- /* Legacy Rx frames */
- priv->rx_handlers[REPLY_RX] = iwlagn_rx_reply_rx;
- /* Tx response */
- priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
- priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
-
- /* set up notification wait support */
- spin_lock_init(&priv->_agn.notif_wait_lock);
- INIT_LIST_HEAD(&priv->_agn.notif_waits);
- init_waitqueue_head(&priv->_agn.notif_waitq);
-}
-
-static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
-{
- INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
-}
-
-static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
-{
- cancel_work_sync(&priv->txpower_work);
-}
-
-static struct iwl_hcmd_ops iwl4965_hcmd = {
- .rxon_assoc = iwl4965_send_rxon_assoc,
- .commit_rxon = iwl4965_commit_rxon,
- .set_rxon_chain = iwlagn_set_rxon_chain,
- .send_bt_config = iwl_send_bt_config,
-};
-
-static void iwl4965_post_scan(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwl4965_post_associate(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- struct ieee80211_conf *conf = NULL;
- int ret = 0;
-
- if (!vif || !priv->is_open)
- return;
-
- if (vif->type == NL80211_IFTYPE_AP) {
- IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
- return;
- }
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- iwl_scan_cancel_timeout(priv, 200);
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret)
- IWL_WARN(priv, "RXON timing - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
-
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
- ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
-
- IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
- vif->bss_conf.aid, vif->bss_conf.beacon_int);
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- iwlcore_commit_rxon(priv, ctx);
-
- IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
- vif->bss_conf.aid, ctx->active.bssid_addr);
-
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- break;
- case NL80211_IFTYPE_ADHOC:
- iwlagn_send_beacon_cmd(priv);
- break;
- default:
- IWL_ERR(priv, "%s Should not be called in %d mode\n",
- __func__, vif->type);
- break;
- }
-
- /* the chain noise calibration will enabled PM upon completion
- * If chain noise has already been run, then we need to enable
- * power management here */
- if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
- iwl_power_update_mode(priv, false);
-
- /* Enable Rx differential gain and sensitivity calibrations */
- iwl_chain_noise_reset(priv);
- priv->start_calib = 1;
-}
-
-static void iwl4965_config_ap(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- int ret = 0;
-
- lockdep_assert_held(&priv->mutex);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!iwl_is_associated_ctx(ctx)) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- /* RXON Timing */
- ret = iwl_send_rxon_timing(priv, ctx);
- if (ret)
- IWL_WARN(priv, "RXON timing failed - "
- "Attempting to continue.\n");
-
- /* AP has all antennas */
- priv->chain_noise_data.active_chains =
- priv->hw_params.valid_rx_ant;
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* need to send beacon cmd before committing assoc RXON! */
- iwlagn_send_beacon_cmd(priv);
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
- }
- iwlagn_send_beacon_cmd(priv);
-
- /* FIXME - we need to add code here to detect a totally new
- * configuration, reset the AP, unassoc, rxon timing, assoc,
- * clear sta table, add BCAST sta... */
-}
-
-static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
- .get_hcmd_size = iwl4965_get_hcmd_size,
- .build_addsta_hcmd = iwl4965_build_addsta_hcmd,
- .chain_noise_reset = iwl4965_chain_noise_reset,
- .gain_computation = iwl4965_gain_computation,
- .tx_cmd_protection = iwl_legacy_tx_cmd_protection,
- .calc_rssi = iwl4965_calc_rssi,
- .request_scan = iwlagn_request_scan,
- .post_scan = iwl4965_post_scan,
-};
-
-static struct iwl_lib_ops iwl4965_lib = {
- .set_hw_params = iwl4965_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
- .txq_set_sched = iwl4965_txq_set_sched,
- .txq_agg_enable = iwl4965_txq_agg_enable,
- .txq_agg_disable = iwl4965_txq_agg_disable,
- .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = iwl_hw_txq_free_tfd,
- .txq_init = iwl_hw_tx_queue_init,
- .rx_handler_setup = iwl4965_rx_handler_setup,
- .setup_deferred_work = iwl4965_setup_deferred_work,
- .cancel_deferred_work = iwl4965_cancel_deferred_work,
- .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
- .alive_notify = iwl4965_alive_notify,
- .init_alive_start = iwl4965_init_alive_start,
- .load_ucode = iwl4965_load_bsm,
- .dump_nic_event_log = iwl_dump_nic_event_log,
- .dump_nic_error_log = iwl_dump_nic_error_log,
- .dump_fh = iwl_dump_fh,
- .set_channel_switch = iwl4965_hw_channel_switch,
- .apm_ops = {
- .init = iwl_apm_init,
- .config = iwl4965_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
- },
- .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
- .release_semaphore = iwlcore_eeprom_release_semaphore,
- .calib_version = iwl4965_eeprom_calib_version,
- .query_addr = iwlcore_eeprom_query_addr,
- },
- .send_tx_power = iwl4965_send_tx_power,
- .update_chain_flags = iwl_update_chain_flags,
- .isr_ops = {
- .isr = iwl_isr_legacy,
- },
- .temp_ops = {
- .temperature = iwl4965_temperature_calib,
- },
- .debugfs_ops = {
- .rx_stats_read = iwl_ucode_rx_stats_read,
- .tx_stats_read = iwl_ucode_tx_stats_read,
- .general_stats_read = iwl_ucode_general_stats_read,
- .bt_stats_read = iwl_ucode_bt_stats_read,
- .reply_tx_error = iwl_reply_tx_error_read,
- },
- .check_plcp_health = iwl_good_plcp_health,
-};
-
-static const struct iwl_legacy_ops iwl4965_legacy_ops = {
- .post_associate = iwl4965_post_associate,
- .config_ap = iwl4965_config_ap,
- .manage_ibss_station = iwlagn_manage_ibss_station,
- .update_bcast_stations = iwl_update_bcast_stations,
-};
-
-struct ieee80211_ops iwl4965_hw_ops = {
- .tx = iwlagn_mac_tx,
- .start = iwlagn_mac_start,
- .stop = iwlagn_mac_stop,
- .add_interface = iwl_mac_add_interface,
- .remove_interface = iwl_mac_remove_interface,
- .change_interface = iwl_mac_change_interface,
- .config = iwl_legacy_mac_config,
- .configure_filter = iwlagn_configure_filter,
- .set_key = iwlagn_mac_set_key,
- .update_tkip_key = iwlagn_mac_update_tkip_key,
- .conf_tx = iwl_mac_conf_tx,
- .reset_tsf = iwl_legacy_mac_reset_tsf,
- .bss_info_changed = iwl_legacy_mac_bss_info_changed,
- .ampdu_action = iwlagn_mac_ampdu_action,
- .hw_scan = iwl_mac_hw_scan,
- .sta_add = iwlagn_mac_sta_add,
- .sta_remove = iwl_mac_sta_remove,
- .channel_switch = iwlagn_mac_channel_switch,
- .flush = iwlagn_mac_flush,
- .tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static const struct iwl_ops iwl4965_ops = {
- .lib = &iwl4965_lib,
- .hcmd = &iwl4965_hcmd,
- .utils = &iwl4965_hcmd_utils,
- .led = &iwlagn_led_ops,
- .legacy = &iwl4965_legacy_ops,
- .ieee80211_ops = &iwl4965_hw_ops,
-};
-
-static struct iwl_base_params iwl4965_base_params = {
- .eeprom_size = IWL4965_EEPROM_IMG_SIZE,
- .num_of_queues = IWL49_NUM_QUEUES,
- .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = true,
- .use_isr_legacy = true,
- .broken_powersave = true,
- .led_compensation = 61,
- .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
- .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
- .wd_timeout = IWL_DEF_WD_TIMEOUT,
- .temperature_kelvin = true,
- .max_event_log_size = 512,
- .tx_power_by_driver = true,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
- .no_agg_framecnt_info = true,
-};
-
-struct iwl_cfg iwl4965_agn_cfg = {
- .name = "Intel(R) Wireless WiFi Link 4965AGN",
- .fw_name_pre = IWL4965_FW_PRE,
- .ucode_api_max = IWL4965_UCODE_API_MAX,
- .ucode_api_min = IWL4965_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_ABC,
- .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
- .ops = &iwl4965_ops,
- .mod_params = &iwlagn_mod_params,
- .base_params = &iwl4965_base_params,
- .led_mode = IWL_LED_BLINK,
- /*
- * Force use of chains B and C for scan RX on 5 GHz band
- * because the device has off-channel reception on chain A.
- */
- .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
-};
-
-/* Module firmware */
-MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 9965215..d08fa93 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -86,7 +86,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
static bool iwlagn_bt_ch_announce = 1;
@@ -3810,7 +3809,6 @@ static void iwlagn_bg_roc_done(struct work_struct *work)
mutex_unlock(&priv->mutex);
}
-#ifdef CONFIG_IWL5000
static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type,
@@ -3866,7 +3864,6 @@ static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
return 0;
}
-#endif
/*****************************************************************************
*
@@ -4036,7 +4033,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv)
kfree(priv->scan_cmd);
}
-#ifdef CONFIG_IWL5000
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
@@ -4061,7 +4057,6 @@ struct ieee80211_ops iwlagn_hw_ops = {
.remain_on_channel = iwl_mac_remain_on_channel,
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
};
-#endif
static void iwl_hw_detect(struct iwl_priv *priv)
{
@@ -4129,12 +4124,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (cfg->mod_params->disable_hw_scan) {
dev_printk(KERN_DEBUG, &(pdev->dev),
"sw scan support is deprecated\n");
-#ifdef CONFIG_IWL5000
iwlagn_hw_ops.hw_scan = NULL;
-#endif
-#ifdef CONFIG_IWL4965
- iwl4965_hw_ops.hw_scan = NULL;
-#endif
}
hw = iwl_alloc_all(cfg);
@@ -4513,12 +4503,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
/* Hardware specific file defines the PCI IDs table for that hardware module */
static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
-#ifdef CONFIG_IWL4965
- {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
- {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#endif /* CONFIG_IWL4965 */
-#ifdef CONFIG_IWL5000
-/* 5100 Series WiFi */
{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
@@ -4704,8 +4688,6 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
{IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
-#endif /* CONFIG_IWL5000 */
-
{0}
};
MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 977ddfb..4bd3420 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -43,11 +43,6 @@
#include "iwl-helpers.h"
-MODULE_DESCRIPTION("iwl core");
-MODULE_VERSION(IWLWIFI_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
/*
* set bt_coex_active to true, uCode will do kill/defer
* every time the priority line is asserted (BT is sending signals on the
@@ -65,15 +60,12 @@ MODULE_LICENSE("GPL");
* default: bt_coex_active = true (BT_COEX_ENABLE)
*/
bool bt_coex_active = true;
-EXPORT_SYMBOL_GPL(bt_coex_active);
module_param(bt_coex_active, bool, S_IRUGO);
MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
u32 iwl_debug_level;
-EXPORT_SYMBOL(iwl_debug_level);
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-EXPORT_SYMBOL(iwl_bcast_addr);
/* This function both allocates and initializes hw and priv. */
@@ -98,7 +90,6 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
out:
return hw;
}
-EXPORT_SYMBOL(iwl_alloc_all);
#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
@@ -272,7 +263,6 @@ int iwlcore_init_geos(struct iwl_priv *priv)
return 0;
}
-EXPORT_SYMBOL(iwlcore_init_geos);
/*
* iwlcore_free_geos - undo allocations in iwlcore_init_geos
@@ -283,7 +273,6 @@ void iwlcore_free_geos(struct iwl_priv *priv)
kfree(priv->ieee_rates);
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
-EXPORT_SYMBOL(iwlcore_free_geos);
static bool iwl_is_channel_extension(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -328,7 +317,6 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
le16_to_cpu(ctx->staging.channel),
ctx->ht.extension_chan_offset);
}
-EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
{
@@ -429,7 +417,6 @@ int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
return iwl_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
sizeof(ctx->timing), &ctx->timing);
}
-EXPORT_SYMBOL(iwl_send_rxon_timing);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
int hw_decrypt)
@@ -442,7 +429,6 @@ void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
}
-EXPORT_SYMBOL(iwl_set_rxon_hwcrypto);
/* validate RXON structure is valid */
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
@@ -515,7 +501,6 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
}
return 0;
}
-EXPORT_SYMBOL(iwl_check_rxon_cmd);
/**
* iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
@@ -579,7 +564,6 @@ int iwl_full_rxon_required(struct iwl_priv *priv,
return 0;
}
-EXPORT_SYMBOL(iwl_full_rxon_required);
u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
@@ -593,7 +577,6 @@ u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
else
return IWL_RATE_6M_PLCP;
}
-EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
static void _iwl_set_rxon_ht(struct iwl_priv *priv,
struct iwl_ht_config *ht_conf,
@@ -670,7 +653,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
for_each_context(priv, ctx)
_iwl_set_rxon_ht(priv, ht_conf, ctx);
}
-EXPORT_SYMBOL(iwl_set_rxon_ht);
/* Return valid, unused, channel for a passive scan to reset the RF */
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
@@ -711,7 +693,6 @@ u8 iwl_get_single_channel_number(struct iwl_priv *priv,
return channel;
}
-EXPORT_SYMBOL(iwl_get_single_channel_number);
/**
* iwl_set_rxon_channel - Set the band and channel values in staging RXON
@@ -742,7 +723,6 @@ int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
return 0;
}
-EXPORT_SYMBOL(iwl_set_rxon_channel);
void iwl_set_flags_for_band(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
@@ -766,7 +746,6 @@ void iwl_set_flags_for_band(struct iwl_priv *priv,
ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
}
}
-EXPORT_SYMBOL(iwl_set_flags_for_band);
/*
* initialize rxon structure with default values from eeprom
@@ -838,7 +817,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv,
ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
}
-EXPORT_SYMBOL(iwl_connection_init_rx_config);
void iwl_set_rate(struct iwl_priv *priv)
{
@@ -871,7 +849,6 @@ void iwl_set_rate(struct iwl_priv *priv)
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
}
-EXPORT_SYMBOL(iwl_set_rate);
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
{
@@ -891,7 +868,6 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
mutex_unlock(&priv->mutex);
}
}
-EXPORT_SYMBOL(iwl_chswitch_done);
void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
@@ -919,7 +895,6 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
}
}
}
-EXPORT_SYMBOL(iwl_rx_csa);
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
@@ -941,7 +916,6 @@ void iwl_print_rx_config_cmd(struct iwl_priv *priv,
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
-EXPORT_SYMBOL(iwl_print_rx_config_cmd);
#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
@@ -1021,7 +995,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
queue_work(priv->workqueue, &priv->restart);
}
}
-EXPORT_SYMBOL(iwl_irq_handle_error);
static int iwl_apm_stop_master(struct iwl_priv *priv)
{
@@ -1058,7 +1031,6 @@ void iwl_apm_stop(struct iwl_priv *priv)
*/
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
}
-EXPORT_SYMBOL(iwl_apm_stop);
/*
@@ -1173,7 +1145,6 @@ int iwl_apm_init(struct iwl_priv *priv)
out:
return ret;
}
-EXPORT_SYMBOL(iwl_apm_init);
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
@@ -1233,7 +1204,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
}
return ret;
}
-EXPORT_SYMBOL(iwl_set_tx_power);
void iwl_send_bt_config(struct iwl_priv *priv)
{
@@ -1257,7 +1227,6 @@ void iwl_send_bt_config(struct iwl_priv *priv)
sizeof(struct iwl_bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
}
-EXPORT_SYMBOL(iwl_send_bt_config);
int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
{
@@ -1275,7 +1244,6 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
sizeof(struct iwl_statistics_cmd),
&statistics_cmd);
}
-EXPORT_SYMBOL(iwl_send_statistics_request);
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1287,7 +1255,6 @@ void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
sleep->pm_sleep_mode, sleep->pm_wakeup_src);
#endif
}
-EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1299,7 +1266,6 @@ void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
get_cmd_string(pkt->hdr.cmd));
iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len);
}
-EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
void iwl_rx_reply_error(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
@@ -1314,7 +1280,6 @@ void iwl_rx_reply_error(struct iwl_priv *priv,
le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
le32_to_cpu(pkt->u.err_resp.error_info));
}
-EXPORT_SYMBOL(iwl_rx_reply_error);
void iwl_clear_isr_stats(struct iwl_priv *priv)
{
@@ -1366,7 +1331,6 @@ int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
-EXPORT_SYMBOL(iwl_mac_conf_tx);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
{
@@ -1374,7 +1338,6 @@ int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
return priv->ibss_manager == IWL_IBSS_MANAGER;
}
-EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -1484,7 +1447,6 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
IWL_DEBUG_MAC80211(priv, "leave\n");
return err;
}
-EXPORT_SYMBOL(iwl_mac_add_interface);
static void iwl_teardown_interface(struct iwl_priv *priv,
struct ieee80211_vif *vif,
@@ -1537,7 +1499,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-EXPORT_SYMBOL(iwl_mac_remove_interface);
int iwl_alloc_txq_mem(struct iwl_priv *priv)
{
@@ -1552,14 +1513,12 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
}
return 0;
}
-EXPORT_SYMBOL(iwl_alloc_txq_mem);
void iwl_free_txq_mem(struct iwl_priv *priv)
{
kfree(priv->txq);
priv->txq = NULL;
}
-EXPORT_SYMBOL(iwl_free_txq_mem);
#ifdef CONFIG_IWLWIFI_DEBUGFS
@@ -1598,7 +1557,6 @@ int iwl_alloc_traffic_mem(struct iwl_priv *priv)
iwl_reset_traffic_log(priv);
return 0;
}
-EXPORT_SYMBOL(iwl_alloc_traffic_mem);
void iwl_free_traffic_mem(struct iwl_priv *priv)
{
@@ -1608,7 +1566,6 @@ void iwl_free_traffic_mem(struct iwl_priv *priv)
kfree(priv->rx_traffic);
priv->rx_traffic = NULL;
}
-EXPORT_SYMBOL(iwl_free_traffic_mem);
void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
@@ -1633,7 +1590,6 @@ void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
(priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
-EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame);
void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
@@ -1658,7 +1614,6 @@ void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
(priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
-EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame);
const char *get_mgmt_string(int cmd)
{
@@ -1795,7 +1750,6 @@ void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
stats->data_bytes += len;
}
}
-EXPORT_SYMBOL(iwl_update_stats);
#endif
static void iwl_force_rf_reset(struct iwl_priv *priv)
@@ -1934,7 +1888,6 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mutex_unlock(&priv->mutex);
return err;
}
-EXPORT_SYMBOL(iwl_mac_change_interface);
/*
* On every watchdog tick we check (latest) time stamp. If it does not
@@ -2006,7 +1959,6 @@ void iwl_bg_watchdog(unsigned long data)
mod_timer(&priv->watchdog, jiffies +
msecs_to_jiffies(IWL_WD_TICK(timeout)));
}
-EXPORT_SYMBOL(iwl_bg_watchdog);
void iwl_setup_watchdog(struct iwl_priv *priv)
{
@@ -2018,7 +1970,6 @@ void iwl_setup_watchdog(struct iwl_priv *priv)
else
del_timer(&priv->watchdog);
}
-EXPORT_SYMBOL(iwl_setup_watchdog);
/*
* extended beacon time format
@@ -2044,7 +1995,6 @@ u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval)
return (quot << priv->hw_params.beacon_time_tsf_bits) + rem;
}
-EXPORT_SYMBOL(iwl_usecs_to_beacons);
/* base is usually what we get from ucode with each received frame,
* the same as HW timer counter counting down
@@ -2072,7 +2022,6 @@ __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
return cpu_to_le32(res);
}
-EXPORT_SYMBOL(iwl_add_beacon_time);
#ifdef CONFIG_PM
@@ -2092,7 +2041,6 @@ int iwl_pci_suspend(struct device *device)
return 0;
}
-EXPORT_SYMBOL(iwl_pci_suspend);
int iwl_pci_resume(struct device *device)
{
@@ -2121,7 +2069,6 @@ int iwl_pci_resume(struct device *device)
return 0;
}
-EXPORT_SYMBOL(iwl_pci_resume);
const struct dev_pm_ops iwl_pm_ops = {
.suspend = iwl_pci_suspend,
@@ -2131,6 +2078,5 @@ const struct dev_pm_ops iwl_pm_ops = {
.poweroff = iwl_pci_suspend,
.restore = iwl_pci_resume,
};
-EXPORT_SYMBOL(iwl_pm_ops);
#endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index bc7a965..8842411 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1788,7 +1788,6 @@ err:
iwl_dbgfs_unregister(priv);
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_dbgfs_register);
/**
* Remove the debugfs files and directories
@@ -1802,7 +1801,6 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
debugfs_remove_recursive(priv->debugfs_dir);
priv->debugfs_dir = NULL;
}
-EXPORT_SYMBOL(iwl_dbgfs_unregister);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 065615e..58165c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -43,14 +43,14 @@
#include "iwl-prph.h"
#include "iwl-fh.h"
#include "iwl-debug.h"
-#include "iwl-4965-hw.h"
-#include "iwl-3945-hw.h"
#include "iwl-agn-hw.h"
#include "iwl-led.h"
#include "iwl-power.h"
#include "iwl-agn-rs.h"
#include "iwl-agn-tt.h"
+#define U32_PAD(n) ((4-(n))&0x3)
+
struct iwl_tx_queue;
/* CT-KILL constants */
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 358cfd7..833194a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -222,7 +222,6 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
BUG_ON(offset >= priv->cfg->base_params->eeprom_size);
return &priv->eeprom[offset];
}
-EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
static int iwl_init_otp_access(struct iwl_priv *priv)
{
@@ -382,7 +381,6 @@ const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
{
return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset);
}
-EXPORT_SYMBOL(iwl_eeprom_query_addr);
u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
{
@@ -390,7 +388,6 @@ u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
return 0;
return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
}
-EXPORT_SYMBOL(iwl_eeprom_query16);
/**
* iwl_eeprom_init - read EEPROM contents
@@ -509,14 +506,12 @@ err:
alloc_err:
return ret;
}
-EXPORT_SYMBOL(iwl_eeprom_init);
void iwl_eeprom_free(struct iwl_priv *priv)
{
kfree(priv->eeprom);
priv->eeprom = NULL;
}
-EXPORT_SYMBOL(iwl_eeprom_free);
static void iwl_init_band_reference(const struct iwl_priv *priv,
int eep_band, int *eeprom_ch_count,
@@ -779,7 +774,6 @@ int iwl_init_channel_map(struct iwl_priv *priv)
return 0;
}
-EXPORT_SYMBOL(iwl_init_channel_map);
/*
* iwl_free_channel_map - undo allocations in iwl_init_channel_map
@@ -789,7 +783,6 @@ void iwl_free_channel_map(struct iwl_priv *priv)
kfree(priv->channel_info);
priv->channel_count = 0;
}
-EXPORT_SYMBOL(iwl_free_channel_map);
/**
* iwl_get_channel_info - Find driver's private channel info
@@ -818,4 +811,3 @@ const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
return NULL;
}
-EXPORT_SYMBOL(iwl_get_channel_info);
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index e4b953d..02499f6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -114,7 +114,6 @@ const char *get_cmd_string(u8 cmd)
}
}
-EXPORT_SYMBOL(get_cmd_string);
#define HOST_COMPLETE_TIMEOUT (HZ / 2)
@@ -253,7 +252,6 @@ out:
mutex_unlock(&priv->sync_cmd_mutex);
return ret;
}
-EXPORT_SYMBOL(iwl_send_cmd_sync);
int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
{
@@ -262,7 +260,6 @@ int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
return iwl_send_cmd_sync(priv, cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd);
int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
{
@@ -274,7 +271,6 @@ int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
return iwl_send_cmd_sync(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd_pdu);
int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
u8 id, u16 len, const void *data,
@@ -293,4 +289,3 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
return iwl_send_cmd_async(priv, &cmd);
}
-EXPORT_SYMBOL(iwl_send_cmd_pdu_async);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 074ad22..d7f2a0b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -175,7 +175,6 @@ void iwl_leds_init(struct iwl_priv *priv)
priv->led_registered = true;
}
-EXPORT_SYMBOL(iwl_leds_init);
void iwl_leds_exit(struct iwl_priv *priv)
{
@@ -185,4 +184,3 @@ void iwl_leds_exit(struct iwl_priv *priv)
led_classdev_unregister(&priv->led);
kfree(priv->led.name);
}
-EXPORT_SYMBOL(iwl_leds_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
deleted file mode 100644
index e1ace3c..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-legacy.h"
-
-static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (!ctx->is_active)
- return;
-
- ctx->qos_data.def_qos_parm.qos_flags = 0;
-
- if (ctx->qos_data.qos_active)
- ctx->qos_data.def_qos_parm.qos_flags |=
- QOS_PARAM_FLG_UPDATE_EDCA_MSK;
-
- if (ctx->ht.enabled)
- ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
-
- IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
- ctx->qos_data.qos_active,
- ctx->qos_data.def_qos_parm.qos_flags);
-
- iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
- sizeof(struct iwl_qosparam_cmd),
- &ctx->qos_data.def_qos_parm, NULL);
-}
-
-/**
- * iwl_legacy_mac_config - mac80211 config callback
- */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct iwl_priv *priv = hw->priv;
- const struct iwl_channel_info *ch_info;
- struct ieee80211_conf *conf = &hw->conf;
- struct ieee80211_channel *channel = conf->channel;
- struct iwl_ht_config *ht_conf = &priv->current_ht_config;
- struct iwl_rxon_context *ctx;
- unsigned long flags = 0;
- int ret = 0;
- u16 ch;
- int scan_active = 0;
- bool ht_changed[NUM_IWL_RXON_CTX] = {};
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return -EOPNOTSUPP;
-
- mutex_lock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
- channel->hw_value, changed);
-
- if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
- scan_active = 1;
- IWL_DEBUG_MAC80211(priv, "scan active\n");
- }
-
- if (changed & (IEEE80211_CONF_CHANGE_SMPS |
- IEEE80211_CONF_CHANGE_CHANNEL)) {
- /* mac80211 uses static for non-HT which is what we want */
- priv->current_ht_config.smps = conf->smps_mode;
-
- /*
- * Recalculate chain counts.
- *
- * If monitor mode is enabled then mac80211 will
- * set up the SM PS mode to OFF if an HT channel is
- * configured.
- */
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- for_each_context(priv, ctx)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
- }
-
- /* during scanning mac80211 will delay channel setting until
- * scan finish with changed = 0
- */
- if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
- if (scan_active)
- goto set_ch_out;
-
- ch = channel->hw_value;
- ch_info = iwl_get_channel_info(priv, channel->band, ch);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
- ret = -EINVAL;
- goto set_ch_out;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- for_each_context(priv, ctx) {
- /* Configure HT40 channels */
- if (ctx->ht.enabled != conf_is_ht(conf)) {
- ctx->ht.enabled = conf_is_ht(conf);
- ht_changed[ctx->ctxid] = true;
- }
- if (ctx->ht.enabled) {
- if (conf_is_ht40_minus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_BELOW;
- ctx->ht.is_40mhz = true;
- } else if (conf_is_ht40_plus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
- ctx->ht.is_40mhz = true;
- } else {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_NONE;
- ctx->ht.is_40mhz = false;
- }
- } else
- ctx->ht.is_40mhz = false;
-
- /*
- * Default to no protection. Protection mode will
- * later be set from BSS config in iwl_ht_conf
- */
- ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
-
- /* if we are switching from ht to 2.4 clear flags
- * from any ht related info since 2.4 does not
- * support ht */
- if ((le16_to_cpu(ctx->staging.channel) != ch))
- ctx->staging.flags = 0;
-
- iwl_set_rxon_channel(priv, channel, ctx);
- iwl_set_rxon_ht(priv, ht_conf);
-
- iwl_set_flags_for_band(priv, ctx, channel->band,
- ctx->vif);
- }
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (priv->cfg->ops->legacy->update_bcast_stations)
- ret = priv->cfg->ops->legacy->update_bcast_stations(priv);
-
- set_ch_out:
- /* The list of supported rates and rate mask can be different
- * for each band; since the band may have changed, reset
- * the rate mask to what mac80211 lists */
- iwl_set_rate(priv);
- }
-
- if (changed & (IEEE80211_CONF_CHANGE_PS |
- IEEE80211_CONF_CHANGE_IDLE)) {
- ret = iwl_power_update_mode(priv, false);
- if (ret)
- IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
- }
-
- if (changed & IEEE80211_CONF_CHANGE_POWER) {
- IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
- priv->tx_power_user_lmt, conf->power_level);
-
- iwl_set_tx_power(priv, conf->power_level, false);
- }
-
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- goto out;
- }
-
- if (scan_active)
- goto out;
-
- for_each_context(priv, ctx) {
- if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
- iwlcore_commit_rxon(priv, ctx);
- else
- IWL_DEBUG_INFO(priv,
- "Not re-sending same RXON configuration.\n");
- if (ht_changed[ctx->ctxid])
- iwl_update_qos(priv, ctx);
- }
-
-out:
- IWL_DEBUG_MAC80211(priv, "leave\n");
- mutex_unlock(&priv->mutex);
- return ret;
-}
-EXPORT_SYMBOL(iwl_legacy_mac_config);
-
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
- unsigned long flags;
- /* IBSS can only be the IWL_RXON_CTX_BSS context */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return;
-
- mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- spin_lock_irqsave(&priv->lock, flags);
- memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
- spin_unlock_irqrestore(&priv->lock, flags);
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* new association get rid of ibss beacon skb */
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = NULL;
-
- priv->timestamp = 0;
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl_scan_cancel_timeout(priv, 100);
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- mutex_unlock(&priv->mutex);
- return;
- }
-
- /* we are restarting association process
- * clear RXON_FILTER_ASSOC_MSK bit
- */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv, ctx);
-
- iwl_set_rate(priv);
-
- mutex_unlock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_reset_tsf);
-
-static void iwl_ht_conf(struct iwl_priv *priv,
- struct ieee80211_vif *vif)
-{
- struct iwl_ht_config *ht_conf = &priv->current_ht_config;
- struct ieee80211_sta *sta;
- struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- IWL_DEBUG_ASSOC(priv, "enter:\n");
-
- if (!ctx->ht.enabled)
- return;
-
- ctx->ht.protection =
- bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
- ctx->ht.non_gf_sta_present =
- !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
- ht_conf->single_chain_sufficient = false;
-
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- rcu_read_lock();
- sta = ieee80211_find_sta(vif, bss_conf->bssid);
- if (sta) {
- struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- int maxstreams;
-
- maxstreams = (ht_cap->mcs.tx_params &
- IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
- >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
- maxstreams += 1;
-
- if ((ht_cap->mcs.rx_mask[1] == 0) &&
- (ht_cap->mcs.rx_mask[2] == 0))
- ht_conf->single_chain_sufficient = true;
- if (maxstreams <= 1)
- ht_conf->single_chain_sufficient = true;
- } else {
- /*
- * If at all, this can only happen through a race
- * when the AP disconnects us while we're still
- * setting up the connection, in that case mac80211
- * will soon tell us about that.
- */
- ht_conf->single_chain_sufficient = true;
- }
- rcu_read_unlock();
- break;
- case NL80211_IFTYPE_ADHOC:
- ht_conf->single_chain_sufficient = true;
- break;
- default:
- break;
- }
-
- IWL_DEBUG_ASSOC(priv, "leave\n");
-}
-
-static inline void iwl_set_no_assoc(struct iwl_priv *priv,
- struct ieee80211_vif *vif)
-{
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
- /*
- * inform the ucode that there is no longer an
- * association and that no more packets should be
- * sent
- */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- ctx->staging.assoc_id = 0;
- iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwlcore_beacon_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct iwl_priv *priv = hw->priv;
- unsigned long flags;
- __le64 timestamp;
- struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
-
- if (!skb)
- return;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->beacon_ctx) {
- IWL_ERR(priv, "update beacon but no beacon context!\n");
- dev_kfree_skb(skb);
- return;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = skb;
-
- timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
- priv->timestamp = le64_to_cpu(timestamp);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (!iwl_is_ready_rf(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
- return;
- }
-
- priv->cfg->ops->legacy->post_associate(priv);
-}
-
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
- int ret;
-
- if (WARN_ON(!priv->cfg->ops->legacy))
- return;
-
- IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
- if (!iwl_is_alive(priv))
- return;
-
- mutex_lock(&priv->mutex);
-
- if (changes & BSS_CHANGED_QOS) {
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- ctx->qos_data.qos_active = bss_conf->qos;
- iwl_update_qos(priv, ctx);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- if (changes & BSS_CHANGED_BEACON_ENABLED) {
- /*
- * the add_interface code must make sure we only ever
- * have a single interface that could be beaconing at
- * any time.
- */
- if (vif->bss_conf.enable_beacon)
- priv->beacon_ctx = ctx;
- else
- priv->beacon_ctx = NULL;
- }
-
- if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
- dev_kfree_skb(priv->beacon_skb);
- priv->beacon_skb = ieee80211_beacon_get(hw, vif);
- }
-
- if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
- iwl_send_rxon_timing(priv, ctx);
-
- if (changes & BSS_CHANGED_BSSID) {
- IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
-
- /*
- * If there is currently a HW scan going on in the
- * background then we need to cancel it else the RXON
- * below/in post_associate will fail.
- */
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- mutex_unlock(&priv->mutex);
- return;
- }
-
- /* mac80211 only sets assoc when in STATION mode */
- if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
- memcpy(ctx->staging.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
-
- /* currently needed in a few places */
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- } else {
- ctx->staging.filter_flags &=
- ~RXON_FILTER_ASSOC_MSK;
- }
-
- }
-
- /*
- * This needs to be after setting the BSSID in case
- * mac80211 decides to do both changes at once because
- * it will invoke post_associate.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
- iwlcore_beacon_update(hw, vif);
-
- if (changes & BSS_CHANGED_ERP_PREAMBLE) {
- IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
- bss_conf->use_short_preamble);
- if (bss_conf->use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
- }
-
- if (changes & BSS_CHANGED_ERP_CTS_PROT) {
- IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
- if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
- ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
- if (bss_conf->use_cts_prot)
- ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
- else
- ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
- }
-
- if (changes & BSS_CHANGED_BASIC_RATES) {
- /* XXX use this information
- *
- * To do that, remove code from iwl_set_rate() and put something
- * like this here:
- *
- if (A-band)
- ctx->staging.ofdm_basic_rates =
- bss_conf->basic_rates;
- else
- ctx->staging.ofdm_basic_rates =
- bss_conf->basic_rates >> 4;
- ctx->staging.cck_basic_rates =
- bss_conf->basic_rates & 0xF;
- */
- }
-
- if (changes & BSS_CHANGED_HT) {
- iwl_ht_conf(priv, vif);
-
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
- }
-
- if (changes & BSS_CHANGED_ASSOC) {
- IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
- if (bss_conf->assoc) {
- priv->timestamp = bss_conf->timestamp;
-
- if (!iwl_is_rfkill(priv))
- priv->cfg->ops->legacy->post_associate(priv);
- } else
- iwl_set_no_assoc(priv, vif);
- }
-
- if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
- IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
- changes);
- ret = iwl_send_rxon_assoc(priv, ctx);
- if (!ret) {
- /* Sync active_rxon with latest change. */
- memcpy((void *)&ctx->active,
- &ctx->staging,
- sizeof(struct iwl_rxon_cmd));
- }
- }
-
- if (changes & BSS_CHANGED_BEACON_ENABLED) {
- if (vif->bss_conf.enable_beacon) {
- memcpy(ctx->staging.bssid_addr,
- bss_conf->bssid, ETH_ALEN);
- memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
- priv->cfg->ops->legacy->config_ap(priv);
- } else
- iwl_set_no_assoc(priv, vif);
- }
-
- if (changes & BSS_CHANGED_IBSS) {
- ret = priv->cfg->ops->legacy->manage_ibss_station(priv, vif,
- bss_conf->ibss_joined);
- if (ret)
- IWL_ERR(priv, "failed to %s IBSS station %pM\n",
- bss_conf->ibss_joined ? "add" : "remove",
- bss_conf->bssid);
- }
-
- mutex_unlock(&priv->mutex);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data)
-{
- struct iwl_priv *priv = data;
- u32 inta, inta_mask;
- u32 inta_fh;
- unsigned long flags;
- if (!priv)
- return IRQ_NONE;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Disable (but don't clear!) interrupts here to avoid
- * back-to-back ISRs and sporadic interrupts from our NIC.
- * If we have something to service, the tasklet will re-enable ints.
- * If we *don't* have something, we'll re-enable before leaving here. */
- inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
- iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
- /* Discover which interrupts are active/pending */
- inta = iwl_read32(priv, CSR_INT);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
- /* Ignore interrupt if there's nothing in NIC to service.
- * This may be due to IRQ shared with another device,
- * or due to sporadic interrupts thrown from our NIC. */
- if (!inta && !inta_fh) {
- IWL_DEBUG_ISR(priv,
- "Ignore interrupt, inta == 0, inta_fh == 0\n");
- goto none;
- }
-
- if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
- /* Hardware disappeared. It might have already raised
- * an interrupt */
- IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
- goto unplugged;
- }
-
- IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
-
- inta &= ~CSR_INT_BIT_SCD;
-
- /* iwl_irq_tasklet() will service interrupts and re-enable them */
- if (likely(inta || inta_fh))
- tasklet_schedule(&priv->irq_tasklet);
-
-unplugged:
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_HANDLED;
-
-none:
- /* re-enable interrupts here since we don't have anything to service. */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- return IRQ_NONE;
-}
-EXPORT_SYMBOL(iwl_isr_legacy);
-
-/*
- * iwl_legacy_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
- * function.
- */
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- __le16 fc, __le32 *tx_flags)
-{
- if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
- *tx_flags |= TX_CMD_FLG_RTS_MSK;
- *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
- *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-
- if (!ieee80211_is_mgmt(fc))
- return;
-
- switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
- case cpu_to_le16(IEEE80211_STYPE_AUTH):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
- case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
- case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
- *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- *tx_flags |= TX_CMD_FLG_CTS_MSK;
- break;
- }
- } else if (info->control.rates[0].flags &
- IEEE80211_TX_RC_USE_CTS_PROTECT) {
- *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
- *tx_flags |= TX_CMD_FLG_CTS_MSK;
- *tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
- }
-}
-EXPORT_SYMBOL(iwl_legacy_tx_cmd_protection);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.h b/drivers/net/wireless/iwlwifi/iwl-legacy.h
deleted file mode 100644
index 9f7b2f9..0000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __iwl_legacy_h__
-#define __iwl_legacy_h__
-
-/* mac80211 handlers */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed);
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw);
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes);
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- __le16 fc, __le32 *tx_flags);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data);
-
-#endif /* __iwl_legacy_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 1d1bf32..576795e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -425,7 +425,6 @@ int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
return ret;
}
-EXPORT_SYMBOL(iwl_power_set_mode);
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
@@ -434,7 +433,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
iwl_power_build_cmd(priv, &cmd);
return iwl_power_set_mode(priv, &cmd, force);
}
-EXPORT_SYMBOL(iwl_power_update_mode);
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
@@ -448,4 +446,3 @@ void iwl_power_initialize(struct iwl_priv *priv)
memset(&priv->power_data.sleep_cmd, 0,
sizeof(priv->power_data.sleep_cmd));
}
-EXPORT_SYMBOL(iwl_power_initialize);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index bc89393..a21f6fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -118,7 +118,6 @@ int iwl_rx_queue_space(const struct iwl_rx_queue *q)
s = 0;
return s;
}
-EXPORT_SYMBOL(iwl_rx_queue_space);
/**
* iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
@@ -170,7 +169,6 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
exit_unlock:
spin_unlock_irqrestore(&q->lock, flags);
}
-EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
int iwl_rx_queue_alloc(struct iwl_priv *priv)
{
@@ -211,7 +209,6 @@ err_rb:
err_bd:
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_rx_queue_alloc);
void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
@@ -229,7 +226,6 @@ void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
memcpy(&priv->measure_report, report, sizeof(*report));
priv->measurement_status |= MEASUREMENT_READY;
}
-EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif);
void iwl_recover_from_statistics(struct iwl_priv *priv,
struct iwl_rx_packet *pkt)
@@ -249,7 +245,6 @@ void iwl_recover_from_statistics(struct iwl_priv *priv,
!priv->cfg->ops->lib->check_plcp_health(priv, pkt))
iwl_force_reset(priv, IWL_RF_RESET, false);
}
-EXPORT_SYMBOL(iwl_recover_from_statistics);
/*
* returns non-zero if packet should be dropped
@@ -302,4 +297,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
}
return 0;
}
-EXPORT_SYMBOL(iwl_set_decrypted_flag);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 08f1bea..faa6d34 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -155,7 +155,6 @@ int iwl_scan_cancel(struct iwl_priv *priv)
queue_work(priv->workqueue, &priv->abort_scan);
return 0;
}
-EXPORT_SYMBOL(iwl_scan_cancel);
/**
* iwl_scan_cancel_timeout - Cancel any currently executing HW scan
@@ -180,7 +179,6 @@ int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
return test_bit(STATUS_SCAN_HW, &priv->status);
}
-EXPORT_SYMBOL(iwl_scan_cancel_timeout);
/* Service response to REPLY_SCAN_CMD (0x80) */
static void iwl_rx_reply_scan(struct iwl_priv *priv,
@@ -288,7 +286,6 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
iwl_rx_scan_complete_notif;
}
-EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -301,7 +298,6 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
return IWL_ACTIVE_DWELL_TIME_24 +
IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
}
-EXPORT_SYMBOL(iwl_get_active_dwell_time);
u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
@@ -333,7 +329,6 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
return passive;
}
-EXPORT_SYMBOL(iwl_get_passive_dwell_time);
void iwl_init_scan_params(struct iwl_priv *priv)
{
@@ -343,7 +338,6 @@ void iwl_init_scan_params(struct iwl_priv *priv)
if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
}
-EXPORT_SYMBOL(iwl_init_scan_params);
static int __must_check iwl_scan_initiate(struct iwl_priv *priv,
struct ieee80211_vif *vif,
@@ -439,7 +433,6 @@ out_unlock:
return ret;
}
-EXPORT_SYMBOL(iwl_mac_hw_scan);
/*
* internal short scan, this function should only been called while associated.
@@ -536,7 +529,6 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
return (u16)len;
}
-EXPORT_SYMBOL(iwl_fill_probe_req);
static void iwl_bg_abort_scan(struct work_struct *work)
{
@@ -621,7 +613,6 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
}
-EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
{
@@ -635,4 +626,3 @@ void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
mutex_unlock(&priv->mutex);
}
}
-EXPORT_SYMBOL(iwl_cancel_scan_deferred_work);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 49493d1..bc90a12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -169,7 +169,6 @@ int iwl_send_add_sta(struct iwl_priv *priv,
return ret;
}
-EXPORT_SYMBOL(iwl_send_add_sta);
static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
struct ieee80211_sta *sta,
@@ -316,7 +315,6 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
return sta_id;
}
-EXPORT_SYMBOL_GPL(iwl_prep_station);
#define STA_WAIT_TIMEOUT (HZ/2)
@@ -379,7 +377,6 @@ int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
*sta_id_r = sta_id;
return ret;
}
-EXPORT_SYMBOL(iwl_add_station_common);
/**
* iwl_sta_ucode_deactivate - deactivate ucode status for a station
@@ -513,7 +510,6 @@ out_err:
spin_unlock_irqrestore(&priv->sta_lock, flags);
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(iwl_remove_station);
/**
* iwl_clear_ucode_stations - clear ucode station table bits
@@ -548,7 +544,6 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv,
if (!cleared)
IWL_DEBUG_INFO(priv, "No active stations found to be cleared\n");
}
-EXPORT_SYMBOL(iwl_clear_ucode_stations);
/**
* iwl_restore_stations() - Restore driver known stations to device
@@ -625,7 +620,6 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
else
IWL_DEBUG_INFO(priv, "Restoring all known stations .... complete.\n");
}
-EXPORT_SYMBOL(iwl_restore_stations);
void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
@@ -668,7 +662,6 @@ void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
priv->stations[sta_id].sta.sta.addr, ret);
iwl_send_lq_cmd(priv, ctx, &lq, CMD_SYNC, true);
}
-EXPORT_SYMBOL(iwl_reprogram_ap_sta);
int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
{
@@ -680,7 +673,6 @@ int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
return WEP_INVALID_OFFSET;
}
-EXPORT_SYMBOL(iwl_get_free_ucode_key_index);
void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
{
@@ -700,7 +692,6 @@ void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
}
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
-EXPORT_SYMBOL_GPL(iwl_dealloc_bcast_stations);
#ifdef CONFIG_IWLWIFI_DEBUG
static void iwl_dump_lq_cmd(struct iwl_priv *priv,
@@ -810,7 +801,6 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
}
return ret;
}
-EXPORT_SYMBOL(iwl_send_lq_cmd);
int iwl_mac_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -832,4 +822,3 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw,
mutex_unlock(&priv->mutex);
return ret;
}
-EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 073b6ce..7e607d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -84,7 +84,6 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
}
txq->need_update = 0;
}
-EXPORT_SYMBOL(iwl_txq_update_write_ptr);
/**
* iwl_tx_queue_free - Deallocate DMA queue.
@@ -131,7 +130,6 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
-EXPORT_SYMBOL(iwl_tx_queue_free);
/**
* iwl_cmd_queue_free - Deallocate DMA queue.
@@ -193,7 +191,6 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
-EXPORT_SYMBOL(iwl_cmd_queue_free);
/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
* DMA services
@@ -233,7 +230,6 @@ int iwl_queue_space(const struct iwl_queue *q)
s = 0;
return s;
}
-EXPORT_SYMBOL(iwl_queue_space);
/**
@@ -384,7 +380,6 @@ out_free_arrays:
return -ENOMEM;
}
-EXPORT_SYMBOL(iwl_tx_queue_init);
void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
@@ -404,7 +399,6 @@ void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
/* Tell device where to find queue */
priv->cfg->ops->lib->txq_init(priv, txq);
}
-EXPORT_SYMBOL(iwl_tx_queue_reset);
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
@@ -641,4 +635,3 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
}
meta->flags = 0;
}
-EXPORT_SYMBOL(iwl_tx_cmd_complete);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
deleted file mode 100644
index adcef73..0000000
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ /dev/null
@@ -1,4334 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <[email protected]>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/ieee80211_radiotap.h>
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#define DRV_NAME "iwl3945"
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-dev.h"
-#include "iwl-spectrum.h"
-#include "iwl-legacy.h"
-
-/*
- * module name, copyright, version, etc.
- */
-
-#define DRV_DESCRIPTION \
-"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-/*
- * add "s" to indicate spectrum measurement included.
- * we add it here to be consistent with previous releases in which
- * this was configurable.
- */
-#define DRV_VERSION IWLWIFI_VERSION VD "s"
-#define DRV_COPYRIGHT "Copyright(c) 2003-2010 Intel Corporation"
-#define DRV_AUTHOR "<[email protected]>"
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
- /* module parameters */
-struct iwl_mod_params iwl3945_mod_params = {
- .sw_crypto = 1,
- .restart_fw = 1,
- /* the rest are 0 by default */
-};
-
-/**
- * iwl3945_get_antenna_flags - Get antenna flags for RXON command
- * @priv: eeprom and antenna fields are used to determine antenna flags
- *
- * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
- * iwl3945_mod_params.antenna specifies the antenna diversity mode:
- *
- * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
- * IWL_ANTENNA_MAIN - Force MAIN antenna
- * IWL_ANTENNA_AUX - Force AUX antenna
- */
-__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
-{
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
- switch (iwl3945_mod_params.antenna) {
- case IWL_ANTENNA_DIVERSITY:
- return 0;
-
- case IWL_ANTENNA_MAIN:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
-
- case IWL_ANTENNA_AUX:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- }
-
- /* bad antenna selector value */
- IWL_ERR(priv, "Bad antenna selector value (0x%x)\n",
- iwl3945_mod_params.antenna);
-
- return 0; /* "diversity" is default if error */
-}
-
-static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- unsigned long flags;
- __le16 key_flags = 0;
- int ret;
-
- key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
- key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-
- if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
- key_flags |= STA_KEY_MULTICAST_MSK;
-
- keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- keyconf->hw_key_idx = keyconf->keyidx;
- key_flags &= ~STA_KEY_FLG_INVALID;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
- priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
- memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
- keyconf->keylen);
-
- memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
- keyconf->keylen);
-
- if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
- == STA_KEY_FLG_NO_ENC)
- priv->stations[sta_id].sta.key.key_offset =
- iwl_get_free_ucode_key_index(priv);
- /* else, we are overriding an existing key => no need to allocated room
- * in uCode. */
-
- WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
- "no space for a new key");
-
- priv->stations[sta_id].sta.key.key_flags = key_flags;
- priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-
- IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
-
- ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
-
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return ret;
-}
-
-static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
-{
- unsigned long flags;
- struct iwl_addsta_cmd sta_cmd;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
- memset(&priv->stations[sta_id].sta.key, 0,
- sizeof(struct iwl4965_keyinfo));
- priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
- priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
- memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
- return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
-}
-
-static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
- struct ieee80211_key_conf *keyconf, u8 sta_id)
-{
- int ret = 0;
-
- keyconf->hw_key_idx = HW_KEY_DYNAMIC;
-
- switch (keyconf->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_TKIP:
- ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
- break;
- default:
- IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__,
- keyconf->cipher);
- ret = -EINVAL;
- }
-
- IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
- keyconf->cipher, keyconf->keylen, keyconf->keyidx,
- sta_id, ret);
-
- return ret;
-}
-
-static int iwl3945_remove_static_key(struct iwl_priv *priv)
-{
- int ret = -EOPNOTSUPP;
-
- return ret;
-}
-
-static int iwl3945_set_static_key(struct iwl_priv *priv,
- struct ieee80211_key_conf *key)
-{
- if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
- key->cipher == WLAN_CIPHER_SUITE_WEP104)
- return -EOPNOTSUPP;
-
- IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher);
- return -EINVAL;
-}
-
-static void iwl3945_clear_free_frames(struct iwl_priv *priv)
-{
- struct list_head *element;
-
- IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
- priv->frames_count);
-
- while (!list_empty(&priv->free_frames)) {
- element = priv->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct iwl3945_frame, list));
- priv->frames_count--;
- }
-
- if (priv->frames_count) {
- IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
- priv->frames_count);
- priv->frames_count = 0;
- }
-}
-
-static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv)
-{
- struct iwl3945_frame *frame;
- struct list_head *element;
- if (list_empty(&priv->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IWL_ERR(priv, "Could not allocate frame!\n");
- return NULL;
- }
-
- priv->frames_count++;
- return frame;
- }
-
- element = priv->free_frames.next;
- list_del(element);
- return list_entry(element, struct iwl3945_frame, list);
-}
-
-static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &priv->free_frames);
-}
-
-unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
- int left)
-{
-
- if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb)
- return 0;
-
- if (priv->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
- return priv->beacon_skb->len;
-}
-
-static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
-{
- struct iwl3945_frame *frame;
- unsigned int frame_size;
- int rc;
- u8 rate;
-
- frame = iwl3945_get_free_frame(priv);
-
- if (!frame) {
- IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
-
- rate = iwl_rate_get_lowest_plcp(priv,
- &priv->contexts[IWL_RXON_CTX_BSS]);
-
- frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
-
- rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
- &frame->u.cmd[0]);
-
- iwl3945_free_frame(priv, frame);
-
- return rc;
-}
-
-static void iwl3945_unset_hw_params(struct iwl_priv *priv)
-{
- if (priv->_3945.shared_virt)
- dma_free_coherent(&priv->pci_dev->dev,
- sizeof(struct iwl3945_shared),
- priv->_3945.shared_virt,
- priv->_3945.shared_phys);
-}
-
-static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
- struct iwl_device_cmd *cmd,
- struct sk_buff *skb_frag,
- int sta_id)
-{
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
- struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
-
- tx_cmd->sec_ctl = 0;
-
- switch (keyinfo->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
- memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
- IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
- break;
-
- case WLAN_CIPHER_SUITE_TKIP:
- break;
-
- case WLAN_CIPHER_SUITE_WEP104:
- tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
- /* fall through */
- case WLAN_CIPHER_SUITE_WEP40:
- tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
- (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
-
- memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
-
- IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
- "with key %d\n", info->control.hw_key->hw_key_idx);
- break;
-
- default:
- IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher);
- break;
- }
-}
-
-/*
- * handle build REPLY_TX command notification.
- */
-static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr, u8 std_id)
-{
- struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
- __le32 tx_flags = tx_cmd->tx_flags;
- __le16 fc = hdr->frame_control;
-
- tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- tx_flags |= TX_CMD_FLG_ACK_MSK;
- if (ieee80211_is_mgmt(fc))
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- if (ieee80211_is_probe_resp(fc) &&
- !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
- tx_flags |= TX_CMD_FLG_TSF_MSK;
- } else {
- tx_flags &= (~TX_CMD_FLG_ACK_MSK);
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- tx_cmd->sta_id = std_id;
- if (ieee80211_has_morefrags(fc))
- tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tx_cmd->tid_tspec = qc[0] & 0xf;
- tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
- } else {
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags);
-
- tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
- if (ieee80211_is_mgmt(fc)) {
- if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
- else
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
- } else {
- tx_cmd->timeout.pm_frame_timeout = 0;
- }
-
- tx_cmd->driver_txop = 0;
- tx_cmd->tx_flags = tx_flags;
- tx_cmd->next_frame_len = 0;
-}
-
-/*
- * start REPLY_TX command process
- */
-static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct iwl3945_tx_cmd *tx_cmd;
- struct iwl_tx_queue *txq = NULL;
- struct iwl_queue *q = NULL;
- struct iwl_device_cmd *out_cmd;
- struct iwl_cmd_meta *out_meta;
- dma_addr_t phys_addr;
- dma_addr_t txcmd_phys;
- int txq_id = skb_get_queue_mapping(skb);
- u16 len, idx, hdr_len;
- u8 id;
- u8 unicast;
- u8 sta_id;
- u8 tid = 0;
- __le16 fc;
- u8 wait_write_ptr = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
- goto drop_unlock;
- }
-
- if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
- IWL_ERR(priv, "ERROR: No TX rate available.\n");
- goto drop_unlock;
- }
-
- unicast = !is_multicast_ether_addr(hdr->addr1);
- id = 0;
-
- fc = hdr->frame_control;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (ieee80211_is_auth(fc))
- IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
- else if (ieee80211_is_assoc_req(fc))
- IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
- else if (ieee80211_is_reassoc_req(fc))
- IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- hdr_len = ieee80211_hdrlen(fc);
-
- /* Find index into station table for destination station */
- sta_id = iwl_sta_id_or_broadcast(
- priv, &priv->contexts[IWL_RXON_CTX_BSS],
- info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop;
- }
-
- IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- if (unlikely(tid >= MAX_TID_COUNT))
- goto drop;
- }
-
- /* Descriptor for chosen Tx queue */
- txq = &priv->txq[txq_id];
- q = &txq->q;
-
- if ((iwl_queue_space(q) < q->high_mark))
- goto drop;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- idx = get_cmd_index(q, q->write_ptr, 0);
-
- /* Set up driver data for this TFD */
- memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
- txq->txb[q->write_ptr].skb = skb;
- txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /* Init first empty entry in queue's array of Tx/cmd buffers */
- out_cmd = txq->cmd[idx];
- out_meta = &txq->meta[idx];
- tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
- memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
- memset(tx_cmd, 0, sizeof(*tx_cmd));
-
- /*
- * Set up the Tx-command (not MAC!) header.
- * Store the chosen Tx queue and TFD index within the sequence field;
- * after Tx, uCode's Tx response will return this value so driver can
- * locate the frame within the tx queue and do post-tx processing.
- */
- out_cmd->hdr.cmd = REPLY_TX;
- out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
- INDEX_TO_SEQ(q->write_ptr)));
-
- /* Copy MAC header from skb into command buffer */
- memcpy(tx_cmd->hdr, hdr, hdr_len);
-
-
- if (info->control.hw_key)
- iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
-
- /* TODO need this for burst mode later on */
- iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx_cmd->len = cpu_to_le16(len);
-
- iwl_dbg_log_tx_data_frame(priv, len, hdr);
- iwl_update_stats(priv, true, fc, len);
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
- IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
- le16_to_cpu(out_cmd->hdr.sequence));
- IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
- iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
- iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
- ieee80211_hdrlen(fc));
-
- /*
- * Use the first empty entry in this queue's command buffer array
- * to contain the Tx command and MAC header concatenated together
- * (payload data will be in another buffer).
- * Size of this varies, due to varying MAC header length.
- * If end is not dword aligned, we'll have 2 extra bytes at the end
- * of the MAC header (device reads on dword boundaries).
- * We'll tell device about this padding later.
- */
- len = sizeof(struct iwl3945_tx_cmd) +
- sizeof(struct iwl_cmd_header) + hdr_len;
- len = (len + 3) & ~3;
-
- /* Physical address of this Tx command's header (not MAC header!),
- * within command buffer array. */
- txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
- len, PCI_DMA_TODEVICE);
- /* we do not map meta data ... so we can safely access address to
- * provide to unmap command*/
- dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
-
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- txcmd_phys, len, 1, 0);
-
-
- /* Set up TFD's 2nd entry to point directly to remainder of skb,
- * if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
- phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
- len, PCI_DMA_TODEVICE);
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- phys_addr, len,
- 0, U32_PAD(len));
- }
-
-
- /* Tell device the write index *just past* this latest filled TFD */
- q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
- iwl_txq_update_write_ptr(priv, txq);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if ((iwl_queue_space(q) < q->high_mark)
- && priv->mac80211_registered) {
- if (wait_write_ptr) {
- spin_lock_irqsave(&priv->lock, flags);
- txq->need_update = 1;
- iwl_txq_update_write_ptr(priv, txq);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
-
- iwl_stop_queue(priv, txq);
- }
-
- return 0;
-
-drop_unlock:
- spin_unlock_irqrestore(&priv->lock, flags);
-drop:
- return -1;
-}
-
-static int iwl3945_get_measurement(struct iwl_priv *priv,
- struct ieee80211_measurement_params *params,
- u8 type)
-{
- struct iwl_spectrum_cmd spectrum;
- struct iwl_rx_packet *pkt;
- struct iwl_host_cmd cmd = {
- .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
- .data = (void *)&spectrum,
- .flags = CMD_WANT_SKB,
- };
- u32 add_time = le64_to_cpu(params->start_time);
- int rc;
- int spectrum_resp_status;
- int duration = le16_to_cpu(params->duration);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
- add_time = iwl_usecs_to_beacons(priv,
- le64_to_cpu(params->start_time) - priv->_3945.last_tsf,
- le16_to_cpu(ctx->timing.beacon_interval));
-
- memset(&spectrum, 0, sizeof(spectrum));
-
- spectrum.channel_count = cpu_to_le16(1);
- spectrum.flags =
- RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
- spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
- cmd.len = sizeof(spectrum);
- spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
- spectrum.start_time =
- iwl_add_beacon_time(priv,
- priv->_3945.last_beacon_time, add_time,
- le16_to_cpu(ctx->timing.beacon_interval));
- else
- spectrum.start_time = 0;
-
- spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
- spectrum.channels[0].channel = params->channel;
- spectrum.channels[0].type = type;
- if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
- spectrum.flags |= RXON_FLG_BAND_24G_MSK |
- RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
- rc = iwl_send_cmd_sync(priv, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct iwl_rx_packet *)cmd.reply_page;
- if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
- IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
- rc = -EIO;
- }
-
- spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
- switch (spectrum_resp_status) {
- case 0: /* Command will be handled */
- if (pkt->u.spectrum.id != 0xff) {
- IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
- pkt->u.spectrum.id);
- priv->measurement_status &= ~MEASUREMENT_READY;
- }
- priv->measurement_status |= MEASUREMENT_ACTIVE;
- rc = 0;
- break;
-
- case 1: /* Command will not be handled */
- rc = -EAGAIN;
- break;
- }
-
- iwl_free_pages(priv, cmd.reply_page);
-
- return rc;
-}
-
-static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->init_alive_start;
- } else {
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
- memcpy(&priv->card_alive, &pkt->u.alive_frame,
- sizeof(struct iwl_alive_resp));
- pwork = &priv->alive_start;
- iwl3945_disable_events(priv);
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(priv->workqueue, pwork,
- msecs_to_jiffies(5));
- else
- IWL_WARN(priv, "uCode did not respond OK.\n");
-}
-
-static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
-#endif
-
- IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
-}
-
-static void iwl3945_bg_beacon_update(struct work_struct *work)
-{
- struct iwl_priv *priv =
- container_of(work, struct iwl_priv, beacon_update);
- struct sk_buff *beacon;
-
- /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
- beacon = ieee80211_beacon_get(priv->hw,
- priv->contexts[IWL_RXON_CTX_BSS].vif);
-
- if (!beacon) {
- IWL_ERR(priv, "update beacon failed\n");
- return;
- }
-
- mutex_lock(&priv->mutex);
- /* new beacon skb is allocated every time; dispose previous.*/
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- priv->beacon_skb = beacon;
- mutex_unlock(&priv->mutex);
-
- iwl3945_send_beacon_cmd(priv);
-}
-
-static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
-#ifdef CONFIG_IWLWIFI_DEBUG
- u8 rate = beacon->beacon_notify_hdr.rate;
-
- IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
- "tsf %d %d rate %d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
- if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
- (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
- queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = rxb_addr(rxb);
- u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
- unsigned long status = priv->status;
-
- IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
- (flags & HW_CARD_DISABLED) ? "Kill" : "On",
- (flags & SW_CARD_DISABLED) ? "Kill" : "On");
-
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-
- iwl_scan_cancel(priv);
-
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &priv->status)))
- wiphy_rfkill_set_hw_state(priv->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &priv->status));
- else
- wake_up_interruptible(&priv->wait_command_queue);
-}
-
-/**
- * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
-{
- priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
- priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
- priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
- priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
- priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
- iwl_rx_spectrum_measure_notif;
- priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
- priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
- iwl_rx_pm_debug_statistics_notif;
- priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
-
- /*
- * The same handler is used for both the REPLY to a discrete
- * statistics request from the host as well as for the periodic
- * statistics notifications (after received beacons) from the uCode.
- */
- priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics;
- priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
-
- iwl_setup_rx_scan_handlers(priv);
- priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
-
- /* Set up hardware specific Rx handlers */
- iwl3945_hw_rx_handler_setup(priv);
-}
-
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * The host allocates 32 DMA target addresses and passes the host address
- * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
- * 0 to 31
- *
- * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
- *
- * The READ index maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ index is managed by the firmware once the card is enabled.
- *
- * The WRITE index maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * INDEX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt. The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ INDEX is updated (updating the
- * 'processed' and 'read' driver indexes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' index is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * iwl3945_rx_queue_restock
- * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE index. If insufficient rx_free buffers
- * are available, schedules iwl3945_rx_replenish
- *
- * -- enable interrupts --
- * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
- * READ INDEX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls iwl3945_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)dma_addr);
-}
-
-/**
- * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-static void iwl3945_rx_queue_restock(struct iwl_priv *priv)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- unsigned long flags;
- int write;
-
- spin_lock_irqsave(&rxq->lock, flags);
- write = rxq->write & ~0x7;
- while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(priv->workqueue, &priv->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if ((rxq->write_actual != (rxq->write & ~0x7))
- || (abs(rxq->write - rxq->read) > 7)) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- iwl_rx_queue_update_write_ptr(priv, rxq);
- }
-}
-
-/**
- * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl3945_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- struct page *page;
- unsigned long flags;
- gfp_t gfp_mask = priority;
-
- while (1) {
- spin_lock_irqsave(&rxq->lock, flags);
-
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- if (rxq->free_count > RX_LOW_WATERMARK)
- gfp_mask |= __GFP_NOWARN;
-
- if (priv->hw_params.rx_page_order > 0)
- gfp_mask |= __GFP_COMP;
-
- /* Alloc a new receive buffer */
- page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
- if (!page) {
- if (net_ratelimit())
- IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
- if ((rxq->free_count <= RX_LOW_WATERMARK) &&
- net_ratelimit())
- IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
- priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
- rxq->free_count);
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- break;
- }
-
- spin_lock_irqsave(&rxq->lock, flags);
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- __free_pages(page, priv->hw_params.rx_page_order);
- return;
- }
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- rxb->page = page;
- /* Get physical address of RB/SKB */
- rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- priv->alloc_rxb_page++;
-
- spin_unlock_irqrestore(&rxq->lock, flags);
- }
-}
-
-void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- unsigned long flags;
- int i;
- spin_lock_irqsave(&rxq->lock, flags);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
- /* In the reset function, these buffers may have been allocated
- * to an SKB, so we need to unmap and free potential storage */
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __iwl_free_pages(priv, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
- }
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->write_actual = 0;
- rxq->free_count = 0;
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-void iwl3945_rx_replenish(void *data)
-{
- struct iwl_priv *priv = data;
- unsigned long flags;
-
- iwl3945_rx_allocate(priv, GFP_KERNEL);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl3945_rx_queue_restock(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
-{
- iwl3945_rx_allocate(priv, GFP_ATOMIC);
-
- iwl3945_rx_queue_restock(priv);
-}
-
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- int i;
- for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __iwl_free_pages(priv, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- }
-
- dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->bd_dma);
- dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
- rxq->rb_stts, rxq->rb_stts_dma);
- rxq->bd = NULL;
- rxq->rb_stts = NULL;
-}
-
-
-/* Convert linear signal-to-noise ratio into dB */
-static u8 ratio2dB[100] = {
-/* 0 1 2 3 4 5 6 7 8 9 */
- 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
- 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
- 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
- 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
- 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
- 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
- 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
- 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
- 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
- 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
-};
-
-/* Calculates a relative dB value from a ratio of linear
- * (i.e. not dB) signal levels.
- * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
-int iwl3945_calc_db_from_ratio(int sig_ratio)
-{
- /* 1000:1 or higher just report as 60 dB */
- if (sig_ratio >= 1000)
- return 60;
-
- /* 100:1 or higher, divide by 10 and use table,
- * add 20 dB to make up for divide by 10 */
- if (sig_ratio >= 100)
- return 20 + (int)ratio2dB[sig_ratio/10];
-
- /* We shouldn't see this */
- if (sig_ratio < 1)
- return 0;
-
- /* Use table for ratios 1:1 - 99:1 */
- return (int)ratio2dB[sig_ratio];
-}
-
-/**
- * iwl3945_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void iwl3945_rx_handle(struct iwl_priv *priv)
-{
- struct iwl_rx_mem_buffer *rxb;
- struct iwl_rx_packet *pkt;
- struct iwl_rx_queue *rxq = &priv->rxq;
- u32 r, i;
- int reclaim;
- unsigned long flags;
- u8 fill_rx = 0;
- u32 count = 8;
- int total_empty = 0;
-
- /* uCode's read index (stored in shared DRAM) indicates the last Rx
- * buffer that the driver may process (last buffer filled by ucode). */
- r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
- i = rxq->read;
-
- /* calculate total frames need to be restock after handling RX */
- total_empty = r - rxq->write_actual;
- if (total_empty < 0)
- total_empty += RX_QUEUE_SIZE;
-
- if (total_empty > (RX_QUEUE_SIZE / 2))
- fill_rx = 1;
- /* Rx interrupt, but nothing sent from uCode */
- if (i == r)
- IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
-
- while (i != r) {
- int len;
-
- rxb = rxq->queue[i];
-
- /* If an RXB doesn't have a Rx queue slot associated with it,
- * then a bug has been introduced in the queue refilling
- * routines -- catch it here */
- BUG_ON(rxb == NULL);
-
- rxq->queue[i] = NULL;
-
- pci_unmap_page(priv->pci_dev, rxb->page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- pkt = rxb_addr(rxb);
-
- len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
- len += sizeof(u32); /* account for status word */
- trace_iwlwifi_dev_rx(priv, pkt, len);
-
- /* Reclaim a command buffer only if this packet is a response
- * to a (driver-originated) command.
- * If the packet (e.g. Rx frame) originated from uCode,
- * there is no command buffer to reclaim.
- * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
- * but apparently a few don't get set; catch them here. */
- reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
- (pkt->hdr.cmd != REPLY_TX);
-
- /* Based on type of command response or notification,
- * handle those that need handling via function in
- * rx_handlers table. See iwl3945_setup_rx_handlers() */
- if (priv->rx_handlers[pkt->hdr.cmd]) {
- IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
- get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
- priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
- priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
- } else {
- /* No handling needed */
- IWL_DEBUG_RX(priv,
- "r %d i %d No handler needed for %s, 0x%02x\n",
- r, i, get_cmd_string(pkt->hdr.cmd),
- pkt->hdr.cmd);
- }
-
- /*
- * XXX: After here, we should always check rxb->page
- * against NULL before touching it or its virtual
- * memory (pkt). Because some rx_handler might have
- * already taken or freed the pages.
- */
-
- if (reclaim) {
- /* Invoke any callbacks, transfer the buffer to caller,
- * and fire off the (possibly) blocking iwl_send_cmd()
- * as we reclaim the driver command queue */
- if (rxb->page)
- iwl_tx_cmd_complete(priv, rxb);
- else
- IWL_WARN(priv, "Claim null rxb?\n");
- }
-
- /* Reuse the page if possible. For notification packets and
- * SKBs that fail to Rx correctly, add them back into the
- * rx_free list for reuse later. */
- spin_lock_irqsave(&rxq->lock, flags);
- if (rxb->page != NULL) {
- rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
- 0, PAGE_SIZE << priv->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- } else
- list_add_tail(&rxb->list, &rxq->rx_used);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- i = (i + 1) & RX_QUEUE_MASK;
- /* If there are a lot of unused frames,
- * restock the Rx queue so ucode won't assert. */
- if (fill_rx) {
- count++;
- if (count >= 8) {
- rxq->read = i;
- iwl3945_rx_replenish_now(priv);
- count = 0;
- }
- }
- }
-
- /* Backtrack one entry */
- rxq->read = i;
- if (fill_rx)
- iwl3945_rx_replenish_now(priv);
- else
- iwl3945_rx_queue_restock(priv);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(priv->pci_dev->irq);
- tasklet_kill(&priv->irq_tasklet);
-}
-
-static const char *desc_lookup(int i)
-{
- switch (i) {
- case 1:
- return "FAIL";
- case 2:
- return "BAD_PARAM";
- case 3:
- return "BAD_CHECKSUM";
- case 4:
- return "NMI_INTERRUPT";
- case 5:
- return "SYSASSERT";
- case 6:
- return "FATAL_ERROR";
- }
-
- return "UNKNOWN";
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
-{
- u32 i;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
-
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
-
- count = iwl_read_targ_mem(priv, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IWL_ERR(priv, "Start IWL Error Log Dump:\n");
- IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, count);
- }
-
- IWL_ERR(priv, "Desc Time asrtPC blink2 "
- "ilink1 nmiPC Line\n");
- for (i = ERROR_START_OFFSET;
- i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
- i += ERROR_ELEM_SIZE) {
- desc = iwl_read_targ_mem(priv, base + i);
- time =
- iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32));
- blink1 =
- iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32));
- blink2 =
- iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32));
- ilink1 =
- iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32));
- ilink2 =
- iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32));
- data1 =
- iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32));
-
- IWL_ERR(priv,
- "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
- desc_lookup(desc), desc, time, blink1, blink2,
- ilink1, ilink2, data1);
- trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0,
- 0, blink1, blink2, ilink1, ilink2);
- }
-}
-
-#define EVENT_START_OFFSET (6 * sizeof(u32))
-
-/**
- * iwl3945_print_event_log - Dump error event log to syslog
- *
- */
-static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
- u32 num_events, u32 mode,
- int pos, char **buf, size_t bufsz)
-{
- u32 i;
- u32 base; /* SRAM byte address of event log header */
- u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
- u32 ptr; /* SRAM byte address of log data */
- u32 ev, time, data; /* event log data */
- unsigned long reg_flags;
-
- if (num_events == 0)
- return pos;
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (mode == 0)
- event_size = 2 * sizeof(u32);
- else
- event_size = 3 * sizeof(u32);
-
- ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
- /* Make sure device is powered up for SRAM reads */
- spin_lock_irqsave(&priv->reg_lock, reg_flags);
- iwl_grab_nic_access(priv);
-
- /* Set starting address; reads will auto-increment */
- _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
- rmb();
-
- /* "time" is actually "data" for mode 0 (no timestamp).
- * place event id # at far right for easier visual parsing. */
- for (i = 0; i < num_events; i++) {
- ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (mode == 0) {
- /* data, ev */
- if (bufsz) {
- pos += scnprintf(*buf + pos, bufsz - pos,
- "0x%08x:%04u\n",
- time, ev);
- } else {
- IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
- trace_iwlwifi_dev_ucode_event(priv, 0,
- time, ev);
- }
- } else {
- data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (bufsz) {
- pos += scnprintf(*buf + pos, bufsz - pos,
- "%010u:0x%08x:%04u\n",
- time, data, ev);
- } else {
- IWL_ERR(priv, "%010u\t0x%08x\t%04u\n",
- time, data, ev);
- trace_iwlwifi_dev_ucode_event(priv, time,
- data, ev);
- }
- }
- }
-
- /* Allow device to power down */
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
- return pos;
-}
-
-/**
- * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
- */
-static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
- u32 num_wraps, u32 next_entry,
- u32 size, u32 mode,
- int pos, char **buf, size_t bufsz)
-{
- /*
- * display the newest DEFAULT_LOG_ENTRIES entries
- * i.e the entries just before the next ont that uCode would fill.
- */
- if (num_wraps) {
- if (next_entry < size) {
- pos = iwl3945_print_event_log(priv,
- capacity - (size - next_entry),
- size - next_entry, mode,
- pos, buf, bufsz);
- pos = iwl3945_print_event_log(priv, 0,
- next_entry, mode,
- pos, buf, bufsz);
- } else
- pos = iwl3945_print_event_log(priv, next_entry - size,
- size, mode,
- pos, buf, bufsz);
- } else {
- if (next_entry < size)
- pos = iwl3945_print_event_log(priv, 0,
- next_entry, mode,
- pos, buf, bufsz);
- else
- pos = iwl3945_print_event_log(priv, next_entry - size,
- size, mode,
- pos, buf, bufsz);
- }
- return pos;
-}
-
-#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
-
-int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
- char **buf, bool display)
-{
- u32 base; /* SRAM byte address of event log header */
- u32 capacity; /* event log capacity in # entries */
- u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
- u32 num_wraps; /* # times uCode wrapped to top of log */
- u32 next_entry; /* index of next entry to be written by uCode */
- u32 size; /* # entries that we'll print */
- int pos = 0;
- size_t bufsz = 0;
-
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
- if (!iwl3945_hw_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return -EINVAL;
- }
-
- /* event log header */
- capacity = iwl_read_targ_mem(priv, base);
- mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
- num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
- next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
- if (capacity > priv->cfg->base_params->max_event_log_size) {
- IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
- capacity, priv->cfg->base_params->max_event_log_size);
- capacity = priv->cfg->base_params->max_event_log_size;
- }
-
- if (next_entry > priv->cfg->base_params->max_event_log_size) {
- IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
- next_entry, priv->cfg->base_params->max_event_log_size);
- next_entry = priv->cfg->base_params->max_event_log_size;
- }
-
- size = num_wraps ? capacity : next_entry;
-
- /* bail out if nothing in log */
- if (size == 0) {
- IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
- return pos;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
- size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
- ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#else
- size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
- ? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#endif
-
- IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n",
- size);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (display) {
- if (full_log)
- bufsz = capacity * 48;
- else
- bufsz = size * 48;
- *buf = kmalloc(bufsz, GFP_KERNEL);
- if (!*buf)
- return -ENOMEM;
- }
- if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
- /* if uCode has wrapped back to top of log,
- * start at the oldest entry,
- * i.e the next one that uCode would fill.
- */
- if (num_wraps)
- pos = iwl3945_print_event_log(priv, next_entry,
- capacity - next_entry, mode,
- pos, buf, bufsz);
-
- /* (then/else) start at top of log */
- pos = iwl3945_print_event_log(priv, 0, next_entry, mode,
- pos, buf, bufsz);
- } else
- pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
- next_entry, size, mode,
- pos, buf, bufsz);
-#else
- pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
- next_entry, size, mode,
- pos, buf, bufsz);
-#endif
- return pos;
-}
-
-static void iwl3945_irq_tasklet(struct iwl_priv *priv)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = iwl_read32(priv, CSR_INT);
- iwl_write32(priv, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
- /* just for debug */
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR39_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR39_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
-
- priv->isr_stats.hw++;
- iwl_irq_handle_error(priv);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
- "the frame/frames.\n");
- priv->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- IWL_DEBUG_ISR(priv, "Alive interrupt\n");
- priv->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IWL_ERR(priv, "Microcode SW error detected. "
- "Restarting 0x%X.\n", inta);
- priv->isr_stats.sw++;
- iwl_irq_handle_error(priv);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /* uCode wakes up after power-down sleep */
- if (inta & CSR_INT_BIT_WAKEUP) {
- IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
- iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
- iwl_txq_update_write_ptr(priv, &priv->txq[0]);
- iwl_txq_update_write_ptr(priv, &priv->txq[1]);
- iwl_txq_update_write_ptr(priv, &priv->txq[2]);
- iwl_txq_update_write_ptr(priv, &priv->txq[3]);
- iwl_txq_update_write_ptr(priv, &priv->txq[4]);
- iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
- priv->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- iwl3945_rx_handle(priv);
- priv->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- if (inta & CSR_INT_BIT_FH_TX) {
- IWL_DEBUG_ISR(priv, "Tx interrupt\n");
- priv->isr_stats.tx++;
-
- iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
- iwl_write_direct32(priv, FH39_TCSR_CREDIT
- (FH39_SRVC_CHNL), 0x0);
- handled |= CSR_INT_BIT_FH_TX;
- }
-
- if (inta & ~handled) {
- IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
- priv->isr_stats.unhandled++;
- }
-
- if (inta & ~priv->inta_mask) {
- IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
- inta & ~priv->inta_mask);
- IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- inta = iwl_read32(priv, CSR_INT);
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
- IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
-static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- enum ieee80211_band band,
- struct iwl3945_scan_channel *scan_ch)
-{
- const struct ieee80211_supported_band *sband;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added = 0;
- u8 channel = 0;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband) {
- IWL_ERR(priv, "invalid band\n");
- return added;
- }
-
- active_dwell = iwl_get_active_dwell_time(priv, band, 0);
- passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
-
- channel = iwl_get_single_channel_number(priv, band);
-
- if (channel) {
- scan_ch->channel = channel;
- scan_ch->type = 0; /* passive */
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- added++;
- } else
- IWL_ERR(priv, "no valid channel found\n");
- return added;
-}
-
-static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct iwl3945_scan_channel *scan_ch,
- struct ieee80211_vif *vif)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband)
- return 0;
-
- active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
- chan = priv->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- scan_ch->channel = chan->hw_value;
-
- ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
- scan_ch->channel);
- continue;
- }
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* If passive , set up for auto-switch
- * and use long active_dwell time.
- */
- if (!is_active || is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
- scan_ch->type = 0; /* passive */
- if (IWL_UCODE_API(priv->ucode_ver) == 1)
- scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
- } else {
- scan_ch->type = 1; /* active */
- }
-
- /* Set direct probe bits. These may be used both for active
- * scan channels (probes gets sent right away),
- * or for passive channels (probes get se sent only after
- * hearing clear Rx packet).*/
- if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
- if (n_probes)
- scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
- } else {
- /* uCode v1 does not allow setting direct probe bits on
- * passive channel. */
- if ((scan_ch->type & 1) && n_probes)
- scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
- }
-
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- /* scan_pwr_info->tpc.dsp_atten; */
-
- /*scan_pwr_info->tpc.tx_gain; */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else {
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- }
-
- IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
- scan_ch->channel,
- (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
- (scan_ch->type & 1) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
- return added;
-}
-
-static void iwl3945_init_hw_rates(struct iwl_priv *priv,
- struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
- rates[i].bitrate = iwl3945_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on indexes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv)
-{
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
- iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
-}
-
-/**
- * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
- * looking at all data.
- */
-static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len)
-{
- u32 val;
- u32 save_len = len;
- int rc = 0;
- u32 errcnt;
-
- IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
- IWL39_RTC_INST_LOWER_BOUND);
-
- errcnt = 0;
- for (; len > 0; len -= sizeof(u32), image++) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
- IWL_ERR(priv, "uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- save_len - len, val, le32_to_cpu(*image));
- rc = -EIO;
- errcnt++;
- if (errcnt >= 20)
- break;
- }
- }
-
-
- if (!errcnt)
- IWL_DEBUG_INFO(priv,
- "ucode image in INSTRUCTION memory is good\n");
-
- return rc;
-}
-
-
-/**
- * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
- * using sample data 100 bytes apart. If these sample points are good,
- * it's a pretty good bet that everything between them is good, too.
- */
-static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
-{
- u32 val;
- int rc = 0;
- u32 errcnt = 0;
- u32 i;
-
- IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
- for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IWL_DL_IO is set */
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
- i + IWL39_RTC_INST_LOWER_BOUND);
- val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
-#if 0 /* Enable this if you want to see details */
- IWL_ERR(priv, "uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- i, val, *image);
-#endif
- rc = -EIO;
- errcnt++;
- if (errcnt >= 3)
- break;
- }
- }
-
- return rc;
-}
-
-
-/**
- * iwl3945_verify_ucode - determine which instruction image is in SRAM,
- * and verify its contents
- */
-static int iwl3945_verify_ucode(struct iwl_priv *priv)
-{
- __le32 *image;
- u32 len;
- int rc = 0;
-
- /* Try bootstrap */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try initialize */
- image = (__le32 *)priv->ucode_init.v_addr;
- len = priv->ucode_init.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try runtime/protocol */
- image = (__le32 *)priv->ucode_code.v_addr;
- len = priv->ucode_code.len;
- rc = iwl3945_verify_inst_sparse(priv, image, len);
- if (rc == 0) {
- IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
- return 0;
- }
-
- IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
-
- /* Since nothing seems to match, show first several data entries in
- * instruction SRAM, so maybe visual inspection will give a clue.
- * Selection of bootstrap image (vs. other images) is arbitrary. */
- image = (__le32 *)priv->ucode_boot.v_addr;
- len = priv->ucode_boot.len;
- rc = iwl3945_verify_inst_full(priv, image, len);
-
- return rc;
-}
-
-static void iwl3945_nic_start(struct iwl_priv *priv)
-{
- /* Remove all resets to allow NIC to operate */
- iwl_write32(priv, CSR_RESET, 0);
-}
-
-#define IWL3945_UCODE_GET(item) \
-static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\
-{ \
- return le32_to_cpu(ucode->u.v1.item); \
-}
-
-static u32 iwl3945_ucode_get_header_size(u32 api_ver)
-{
- return 24;
-}
-
-static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode)
-{
- return (u8 *) ucode->u.v1.data;
-}
-
-IWL3945_UCODE_GET(inst_size);
-IWL3945_UCODE_GET(data_size);
-IWL3945_UCODE_GET(init_size);
-IWL3945_UCODE_GET(init_data_size);
-IWL3945_UCODE_GET(boot_size);
-
-/**
- * iwl3945_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int iwl3945_read_ucode(struct iwl_priv *priv)
-{
- const struct iwl_ucode_header *ucode;
- int ret = -EINVAL, index;
- const struct firmware *ucode_raw;
- /* firmware file name contains uCode/driver compatibility version */
- const char *name_pre = priv->cfg->fw_name_pre;
- const unsigned int api_max = priv->cfg->ucode_api_max;
- const unsigned int api_min = priv->cfg->ucode_api_min;
- char buf[25];
- u8 *src;
- size_t len;
- u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
-
- /* Ask kernel firmware_class module to get the boot firmware off disk.
- * request_firmware() is synchronous, file is in memory on return. */
- for (index = api_max; index >= api_min; index--) {
- sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
- ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
- if (ret < 0) {
- IWL_ERR(priv, "%s firmware file req failed: %d\n",
- buf, ret);
- if (ret == -ENOENT)
- continue;
- else
- goto error;
- } else {
- if (index < api_max)
- IWL_ERR(priv, "Loaded firmware %s, "
- "which is deprecated. "
- " Please use API v%u instead.\n",
- buf, api_max);
- IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
- "(%zd bytes) from disk\n",
- buf, ucode_raw->size);
- break;
- }
- }
-
- if (ret < 0)
- goto error;
-
- /* Make sure that we got at least our header! */
- if (ucode_raw->size < iwl3945_ucode_get_header_size(1)) {
- IWL_ERR(priv, "File size way too small!\n");
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Data from ucode file: header followed by uCode images */
- ucode = (struct iwl_ucode_header *)ucode_raw->data;
-
- priv->ucode_ver = le32_to_cpu(ucode->ver);
- api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = iwl3945_ucode_get_inst_size(ucode);
- data_size = iwl3945_ucode_get_data_size(ucode);
- init_size = iwl3945_ucode_get_init_size(ucode);
- init_data_size = iwl3945_ucode_get_init_data_size(ucode);
- boot_size = iwl3945_ucode_get_boot_size(ucode);
- src = iwl3945_ucode_get_data(ucode);
-
- /* api_ver should match the api version forming part of the
- * firmware filename ... but we don't check for that and only rely
- * on the API version read from firmware header from here on forward */
-
- if (api_ver < api_min || api_ver > api_max) {
- IWL_ERR(priv, "Driver unable to support your firmware API. "
- "Driver supports v%u, firmware is v%u.\n",
- api_max, api_ver);
- priv->ucode_ver = 0;
- ret = -EINVAL;
- goto err_release;
- }
- if (api_ver != api_max)
- IWL_ERR(priv, "Firmware has old API version. Expected %u, "
- "got %u. New firmware can be obtained "
- "from http://www.intellinuxwireless.org.\n",
- api_max, api_ver);
-
- IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
- IWL_UCODE_MAJOR(priv->ucode_ver),
- IWL_UCODE_MINOR(priv->ucode_ver),
- IWL_UCODE_API(priv->ucode_ver),
- IWL_UCODE_SERIAL(priv->ucode_ver));
-
- snprintf(priv->hw->wiphy->fw_version,
- sizeof(priv->hw->wiphy->fw_version),
- "%u.%u.%u.%u",
- IWL_UCODE_MAJOR(priv->ucode_ver),
- IWL_UCODE_MINOR(priv->ucode_ver),
- IWL_UCODE_API(priv->ucode_ver),
- IWL_UCODE_SERIAL(priv->ucode_ver));
-
- IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
- priv->ucode_ver);
- IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
- inst_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
- data_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
- init_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
- init_data_size);
- IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
- boot_size);
-
-
- /* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) +
- inst_size + data_size + init_size +
- init_data_size + boot_size) {
-
- IWL_DEBUG_INFO(priv,
- "uCode file size %zd does not match expected size\n",
- ucode_raw->size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Verify that uCode images will fit in card's SRAM */
- if (inst_size > IWL39_MAX_INST_SIZE) {
- IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
- inst_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- if (data_size > IWL39_MAX_DATA_SIZE) {
- IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
- data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_size > IWL39_MAX_INST_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode init instr len %d too large to fit in\n",
- init_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_data_size > IWL39_MAX_DATA_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode init data len %d too large to fit in\n",
- init_data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (boot_size > IWL39_MAX_BSM_SIZE) {
- IWL_DEBUG_INFO(priv,
- "uCode boot instr len %d too large to fit in\n",
- boot_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Allocate ucode buffers for card's bus-master loading ... */
-
- /* Runtime instructions and 2 copies of data:
- * 1) unmodified from disk
- * 2) backup cache for save/restore during power-downs */
- priv->ucode_code.len = inst_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
- priv->ucode_data.len = data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
- priv->ucode_data_backup.len = data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-
- if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
- !priv->ucode_data_backup.v_addr)
- goto err_pci_alloc;
-
- /* Initialization instructions and data */
- if (init_size && init_data_size) {
- priv->ucode_init.len = init_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
- priv->ucode_init_data.len = init_data_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
- if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
- goto err_pci_alloc;
- }
-
- /* Bootstrap (instructions only, no data) */
- if (boot_size) {
- priv->ucode_boot.len = boot_size;
- iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
-
- if (!priv->ucode_boot.v_addr)
- goto err_pci_alloc;
- }
-
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- len = inst_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) uCode instr len %zd\n", len);
- memcpy(priv->ucode_code.v_addr, src, len);
- src += len;
-
- IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
- /* Runtime data (2nd block)
- * NOTE: Copy into backup buffer will be done in iwl3945_up() */
- len = data_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) uCode data len %zd\n", len);
- memcpy(priv->ucode_data.v_addr, src, len);
- memcpy(priv->ucode_data_backup.v_addr, src, len);
- src += len;
-
- /* Initialization instructions (3rd block) */
- if (init_size) {
- len = init_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) init instr len %zd\n", len);
- memcpy(priv->ucode_init.v_addr, src, len);
- src += len;
- }
-
- /* Initialization data (4th block) */
- if (init_data_size) {
- len = init_data_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) init data len %zd\n", len);
- memcpy(priv->ucode_init_data.v_addr, src, len);
- src += len;
- }
-
- /* Bootstrap instructions (5th block) */
- len = boot_size;
- IWL_DEBUG_INFO(priv,
- "Copying (but not loading) boot instr len %zd\n", len);
- memcpy(priv->ucode_boot.v_addr, src, len);
-
- /* We have our copies now, allow OS release its copies */
- release_firmware(ucode_raw);
- return 0;
-
- err_pci_alloc:
- IWL_ERR(priv, "failed to allocate pci memory\n");
- ret = -ENOMEM;
- iwl3945_dealloc_ucode_pci(priv);
-
- err_release:
- release_firmware(ucode_raw);
-
- error:
- return ret;
-}
-
-
-/**
- * iwl3945_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
-
- /* bits 31:0 for 3945 */
- pinst = priv->ucode_code.p_addr;
- pdata = priv->ucode_data_backup.p_addr;
-
- /* Tell bootstrap uCode where to find image to load */
- iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
- iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
- iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
- priv->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
- priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-
- IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
- return 0;
-}
-
-/**
- * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
- */
-static void iwl3945_init_alive_start(struct iwl_priv *priv)
-{
- /* Check alive response for "valid" sign from uCode */
- if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
- goto restart;
- }
-
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (iwl3945_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
- if (iwl3945_set_ucode_ptrs(priv)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-/**
- * iwl3945_alive_start - called after REPLY_ALIVE notification received
- * from protocol/runtime uCode (initialization uCode's
- * Alive gets handled by iwl3945_init_alive_start()).
- */
-static void iwl3945_alive_start(struct iwl_priv *priv)
-{
- int thermal_spin = 0;
- u32 rfkill;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
-
- if (priv->card_alive.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Alive failed.\n");
- goto restart;
- }
-
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (iwl3945_verify_ucode(priv)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
- goto restart;
- }
-
- rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
- IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
-
- if (rfkill & 0x1) {
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- /* if RFKILL is not on, then wait for thermal
- * sensor in adapter to kick in */
- while (iwl3945_hw_get_temperature(priv) == 0) {
- thermal_spin++;
- udelay(10);
- }
-
- if (thermal_spin)
- IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
- thermal_spin * 10);
- } else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
-
- /* After the ALIVE response, we can send commands to 3945 uCode */
- set_bit(STATUS_ALIVE, &priv->status);
-
- /* Enable watchdog to monitor the driver tx queues */
- iwl_setup_watchdog(priv);
-
- if (iwl_is_rfkill(priv))
- return;
-
- ieee80211_wake_queues(priv->hw);
-
- priv->active_rate = IWL_RATES_MASK_3945;
-
- iwl_power_update_mode(priv, true);
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- struct iwl3945_rxon_cmd *active_rxon =
- (struct iwl3945_rxon_cmd *)(&ctx->active);
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- } else {
- /* Initialize our rx_config data */
- iwl_connection_init_rx_config(priv, ctx);
- }
-
- /* Configure Bluetooth device coexistence support */
- priv->cfg->ops->hcmd->send_bt_config(priv);
-
- set_bit(STATUS_READY, &priv->status);
-
- /* Configure the adapter for unassociated operation */
- iwl3945_commit_rxon(priv, ctx);
-
- iwl3945_reg_txpower_periodic(priv);
-
- IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
- wake_up_interruptible(&priv->wait_command_queue);
-
- return;
-
- restart:
- queue_work(priv->workqueue, &priv->restart);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv);
-
-static void __iwl3945_down(struct iwl_priv *priv)
-{
- unsigned long flags;
- int exit_pending;
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
-
- iwl_scan_cancel_timeout(priv, 200);
-
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
- * to prevent rearm timer */
- del_timer_sync(&priv->watchdog);
-
- /* Station information will now be cleared in device */
- iwl_clear_ucode_stations(priv, NULL);
- iwl_dealloc_bcast_stations(priv);
- iwl_clear_driver_stations(priv);
-
- /* Unblock any waiting calls */
- wake_up_interruptible_all(&priv->wait_command_queue);
-
- /* Wipe out the EXIT_PENDING status bit if we are not actually
- * exiting the module */
- if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* stop and reset the on-board processor */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
- iwl_synchronize_irq(priv);
-
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
-
- /* If we have not previously called iwl3945_init() then
- * clear all bits but the RF Kill bits and return */
- if (!iwl_is_init(priv)) {
- priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
- priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &priv->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
- STATUS_EXIT_PENDING;
-
- iwl3945_hw_txq_ctx_stop(priv);
- iwl3945_hw_rxq_stop(priv);
-
- /* Power-down device's busmaster DMA clocks */
- iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Stop the device, and put it in low power state */
- iwl_apm_stop(priv);
-
- exit:
- memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
-
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
- priv->beacon_skb = NULL;
-
- /* clear out any free frames */
- iwl3945_clear_free_frames(priv);
-}
-
-static void iwl3945_down(struct iwl_priv *priv)
-{
- mutex_lock(&priv->mutex);
- __iwl3945_down(priv);
- mutex_unlock(&priv->mutex);
-
- iwl3945_cancel_deferred_work(priv);
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int iwl3945_alloc_bcast_station(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- unsigned long flags;
- u8 sta_id;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_ERR(priv, "Unable to prepare broadcast station\n");
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return -EINVAL;
- }
-
- priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
- priv->stations[sta_id].used |= IWL_STA_BCAST;
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- return 0;
-}
-
-static int __iwl3945_up(struct iwl_priv *priv)
-{
- int rc, i;
-
- rc = iwl3945_alloc_bcast_station(priv);
- if (rc)
- return rc;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
- return -EIO;
- }
-
- if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
- IWL_ERR(priv, "ucode not available for device bring up\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (iwl_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else {
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
- return -ENODEV;
- }
-
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- rc = iwl3945_hw_nic_init(priv);
- if (rc) {
- IWL_ERR(priv, "Unable to int nic\n");
- return rc;
- }
-
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(priv);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Copy original ucode data image from disk into backup cache.
- * This will be used to initialize the on-board processor's
- * data SRAM for a clean start when the runtime program first loads. */
- memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
- priv->ucode_data.len);
-
- /* We return success when we resume from suspend and rf_kill is on. */
- if (test_bit(STATUS_RF_KILL_HW, &priv->status))
- return 0;
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- rc = priv->cfg->ops->lib->load_ucode(priv);
-
- if (rc) {
- IWL_ERR(priv,
- "Unable to set up bootstrap uCode: %d\n", rc);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- iwl3945_nic_start(priv);
-
- IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
-
- return 0;
- }
-
- set_bit(STATUS_EXIT_PENDING, &priv->status);
- __iwl3945_down(priv);
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
- return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void iwl3945_bg_init_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, init_alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_init_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-static void iwl3945_bg_alive_start(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, alive_start.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_alive_start(priv);
- mutex_unlock(&priv->mutex);
-}
-
-/*
- * 3945 cannot interrupt driver when hardware rf kill switch toggles;
- * driver must poll CSR_GP_CNTRL_REG register for change. This register
- * *is* readable even when device has been SW_RESET into low power mode
- * (e.g. during RF KILL).
- */
-static void iwl3945_rfkill_poll(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, _3945.rfkill_poll.work);
- bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
- bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
- & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
-
- if (new_rfkill != old_rfkill) {
- if (new_rfkill)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
-
- IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
- new_rfkill ? "disable radio" : "enable radio");
- }
-
- /* Keep this running, even if radio now enabled. This will be
- * cancelled in mac_start() if system decides to start again */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
-}
-
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct iwl3945_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct iwl3945_scan_cmd *scan;
- u8 n_probes = 0;
- enum ieee80211_band band;
- bool is_active = false;
- int ret;
-
- lockdep_assert_held(&priv->mutex);
-
- if (!priv->scan_cmd) {
- priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) +
- IWL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!priv->scan_cmd) {
- IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n");
- return -ENOMEM;
- }
- }
- scan = priv->scan_cmd;
- memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
- scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
- if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
- u16 interval = 0;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
-
- IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
-
- if (priv->is_internal_short_scan)
- interval = 0;
- else
- interval = vif->bss_conf.beacon_int;
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
- /*
- * suspend time format:
- * 0-19: beacon interval in usec (time before exec.)
- * 20-23: 0
- * 24-31: number of beacons (suspend between channels)
- */
-
- extra = (suspend_time / interval) << 24;
- scan_suspend_time = 0xFF0FFFFF &
- (extra | ((suspend_time % interval) * 1024));
-
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (priv->is_internal_short_scan) {
- IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
- } else if (priv->scan_request->n_ssids) {
- int i, p = 0;
- IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
- for (i = 0; i < priv->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!priv->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- priv->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- priv->scan_request->ssids[i].ssid,
- priv->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
-
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- /* flags + rate selection */
-
- switch (priv->scan_band) {
- case IEEE80211_BAND_2GHZ:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
- band = IEEE80211_BAND_2GHZ;
- break;
- case IEEE80211_BAND_5GHZ:
- scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
- band = IEEE80211_BAND_5GHZ;
- break;
- default:
- IWL_WARN(priv, "Invalid scan band\n");
- return -EIO;
- }
-
- /*
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
- */
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
- IWL_GOOD_CRC_TH_DISABLED;
-
- if (!priv->is_internal_short_scan) {
- scan->tx_cmd.len = cpu_to_le16(
- iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- vif->addr,
- priv->scan_request->ie,
- priv->scan_request->ie_len,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- } else {
- /* use bcast addr, will not be transmitted but must be valid */
- scan->tx_cmd.len = cpu_to_le16(
- iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- iwl_bcast_addr, NULL, 0,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
- }
- /* select Rx antennas */
- scan->flags |= iwl3945_get_antenna_flags(priv);
-
- if (priv->is_internal_short_scan) {
- scan->channel_count =
- iwl3945_get_single_channel_for_scan(priv, vif, band,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- } else {
- scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
- }
-
- if (scan->channel_count == 0) {
- IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
- return -EIO;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct iwl3945_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &priv->status);
- ret = iwl_send_cmd_sync(priv, &cmd);
- if (ret)
- clear_bit(STATUS_SCAN_HW, &priv->status);
- return ret;
-}
-
-void iwl3945_post_scan(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- iwl3945_commit_rxon(priv, ctx);
-}
-
-static void iwl3945_bg_restart(struct work_struct *data)
-{
- struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
- struct iwl_rxon_context *ctx;
- mutex_lock(&priv->mutex);
- for_each_context(priv, ctx)
- ctx->vif = NULL;
- priv->is_open = 0;
- mutex_unlock(&priv->mutex);
- iwl3945_down(priv);
- ieee80211_restart_hw(priv->hw);
- } else {
- iwl3945_down(priv);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- __iwl3945_up(priv);
- mutex_unlock(&priv->mutex);
- }
-}
-
-static void iwl3945_bg_rx_replenish(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, rx_replenish);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwl3945_rx_replenish(priv);
- mutex_unlock(&priv->mutex);
-}
-
-void iwl3945_post_associate(struct iwl_priv *priv)
-{
- int rc = 0;
- struct ieee80211_conf *conf = NULL;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- if (!ctx->vif || !priv->is_open)
- return;
-
- if (ctx->vif->type == NL80211_IFTYPE_AP) {
- IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
- return;
- }
-
- IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
- ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- iwl_scan_cancel_timeout(priv, 200);
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
-
- rc = iwl_send_rxon_timing(priv, ctx);
- if (rc)
- IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
-
- IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
- ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
-
- if (ctx->vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (ctx->vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- iwl3945_commit_rxon(priv, ctx);
-
- switch (ctx->vif->type) {
- case NL80211_IFTYPE_STATION:
- iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
- break;
- case NL80211_IFTYPE_ADHOC:
- iwl3945_send_beacon_cmd(priv);
- break;
- default:
- IWL_ERR(priv, "%s Should not be called in %d mode\n",
- __func__, ctx->vif->type);
- break;
- }
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT (2 * HZ)
-
-static int iwl3945_mac_start(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
- int ret;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- /* we should be verifying the device is ready to be opened */
- mutex_lock(&priv->mutex);
-
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
-
- if (!priv->ucode_code.len) {
- ret = iwl3945_read_ucode(priv);
- if (ret) {
- IWL_ERR(priv, "Could not read microcode: %d\n", ret);
- mutex_unlock(&priv->mutex);
- goto out_release_irq;
- }
- }
-
- ret = __iwl3945_up(priv);
-
- mutex_unlock(&priv->mutex);
-
- if (ret)
- goto out_release_irq;
-
- IWL_DEBUG_INFO(priv, "Start UP work.\n");
-
- /* Wait for START_ALIVE from ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_interruptible_timeout(priv->wait_command_queue,
- test_bit(STATUS_READY, &priv->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_ERR(priv,
- "Wait for START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- ret = -ETIMEDOUT;
- goto out_release_irq;
- }
- }
-
- /* ucode is running and will send rfkill notifications,
- * no need to poll the killswitch state anymore */
- cancel_delayed_work(&priv->_3945.rfkill_poll);
-
- priv->is_open = 1;
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return 0;
-
-out_release_irq:
- priv->is_open = 0;
- IWL_DEBUG_MAC80211(priv, "leave - failed\n");
- return ret;
-}
-
-static void iwl3945_mac_stop(struct ieee80211_hw *hw)
-{
- struct iwl_priv *priv = hw->priv;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- if (!priv->is_open) {
- IWL_DEBUG_MAC80211(priv, "leave - skip\n");
- return;
- }
-
- priv->is_open = 0;
-
- iwl3945_down(priv);
-
- flush_workqueue(priv->workqueue);
-
- /* start polling the killswitch state again */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct iwl_priv *priv = hw->priv;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
- ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
- if (iwl3945_tx_skb(priv, skb))
- dev_kfree_skb_any(skb);
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
- return NETDEV_TX_OK;
-}
-
-void iwl3945_config_ap(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_vif *vif = ctx->vif;
- int rc = 0;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
-
- /* RXON Timing */
- rc = iwl_send_rxon_timing(priv, ctx);
- if (rc)
- IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv, ctx);
- }
- iwl3945_send_beacon_cmd(priv);
-
- /* FIXME - we need to add code here to detect a totally new
- * configuration, reset the AP, unassoc, rxon timing, assoc,
- * clear sta table, add BCAST sta... */
-}
-
-static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct iwl_priv *priv = hw->priv;
- int ret = 0;
- u8 sta_id = IWL_INVALID_STATION;
- u8 static_key;
-
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- if (iwl3945_mod_params.sw_crypto) {
- IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
- return -EOPNOTSUPP;
- }
-
- /*
- * To support IBSS RSN, don't program group keys in IBSS, the
- * hardware will then not attempt to decrypt the frames.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC &&
- !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
- return -EOPNOTSUPP;
-
- static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS);
-
- if (!static_key) {
- sta_id = iwl_sta_id_or_broadcast(
- priv, &priv->contexts[IWL_RXON_CTX_BSS], sta);
- if (sta_id == IWL_INVALID_STATION)
- return -EINVAL;
- }
-
- mutex_lock(&priv->mutex);
- iwl_scan_cancel_timeout(priv, 100);
-
- switch (cmd) {
- case SET_KEY:
- if (static_key)
- ret = iwl3945_set_static_key(priv, key);
- else
- ret = iwl3945_set_dynamic_key(priv, key, sta_id);
- IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
- break;
- case DISABLE_KEY:
- if (static_key)
- ret = iwl3945_remove_static_key(priv);
- else
- ret = iwl3945_clear_sta_key_info(priv, sta_id);
- IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
- break;
- default:
- ret = -EINVAL;
- }
-
- mutex_unlock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "leave\n");
-
- return ret;
-}
-
-static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
-{
- struct iwl_priv *priv = hw->priv;
- struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv;
- int ret;
- bool is_ap = vif->type == NL80211_IFTYPE_STATION;
- u8 sta_id;
-
- IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
- sta->addr);
- mutex_lock(&priv->mutex);
- IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
- sta->addr);
- sta_priv->common.sta_id = IWL_INVALID_STATION;
-
-
- ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS],
- sta->addr, is_ap, sta, &sta_id);
- if (ret) {
- IWL_ERR(priv, "Unable to add station %pM (%d)\n",
- sta->addr, ret);
- /* Should we return success if return code is EEXIST ? */
- mutex_unlock(&priv->mutex);
- return ret;
- }
-
- sta_priv->common.sta_id = sta_id;
-
- /* Initialize rate scaling */
- IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
- sta->addr);
- iwl3945_rs_rate_init(priv, sta, sta_id);
- mutex_unlock(&priv->mutex);
-
- return 0;
-}
-
-static void iwl3945_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
-{
- struct iwl_priv *priv = hw->priv;
- __le32 filter_or = 0, filter_nand = 0;
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-#define CHK(test, flag) do { \
- if (*total_flags & (test)) \
- filter_or |= (flag); \
- else \
- filter_nand |= (flag); \
- } while (0)
-
- IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
- changed_flags, *total_flags);
-
- CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
- CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
- CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
-
-#undef CHK
-
- mutex_lock(&priv->mutex);
-
- ctx->staging.filter_flags &= ~filter_nand;
- ctx->staging.filter_flags |= filter_or;
-
- /*
- * Not committing directly because hardware can perform a scan,
- * but even if hw is ready, committing here breaks for some reason,
- * we'll eventually commit the filter flags change anyway.
- */
-
- mutex_unlock(&priv->mutex);
-
- /*
- * Receiving all multicast frames is always enabled by the
- * default flags setup in iwl_connection_init_rx_config()
- * since we currently do not support programming multicast
- * filters into the device.
- */
- *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
- FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
- else {
- priv->debug_level = val;
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv,
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- show_debug_level, store_debug_level);
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-static ssize_t show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = (char *)buf;
- u32 val;
-
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
- IWL_INFO(priv, ": %s is not in decimal form.\n", buf);
- else
- iwl3945_hw_reg_set_txpower(priv, val);
-
- return count;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- return sprintf(buf, "0x%04X\n", ctx->active.flags);
-}
-
-static ssize_t store_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- u32 flags = simple_strtoul(buf, NULL, 0);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- mutex_lock(&priv->mutex);
- if (le32_to_cpu(ctx->staging.flags) != flags) {
- /* Cancel any currently running scans... */
- if (iwl_scan_cancel_timeout(priv, 100))
- IWL_WARN(priv, "Could not cancel scan.\n");
- else {
- IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
- flags);
- ctx->staging.flags = cpu_to_le32(flags);
- iwl3945_commit_rxon(priv, ctx);
- }
- }
- mutex_unlock(&priv->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
-
-static ssize_t show_filter_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
- return sprintf(buf, "0x%04X\n",
- le32_to_cpu(ctx->active.filter_flags));
-}
-
-static ssize_t store_filter_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- u32 filter_flags = simple_strtoul(buf, NULL, 0);
-
- mutex_lock(&priv->mutex);
- if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
- /* Cancel any currently running scans... */
- if (iwl_scan_cancel_timeout(priv, 100))
- IWL_WARN(priv, "Could not cancel scan.\n");
- else {
- IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
- "0x%04X\n", filter_flags);
- ctx->staging.filter_flags =
- cpu_to_le32(filter_flags);
- iwl3945_commit_rxon(priv, ctx);
- }
- }
- mutex_unlock(&priv->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
- store_filter_flags);
-
-static ssize_t show_measurement(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_spectrum_notification measure_report;
- u32 size = sizeof(measure_report), len = 0, ofs = 0;
- u8 *data = (u8 *)&measure_report;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (!(priv->measurement_status & MEASUREMENT_READY)) {
- spin_unlock_irqrestore(&priv->lock, flags);
- return 0;
- }
- memcpy(&measure_report, &priv->measure_report, size);
- priv->measurement_status = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- while (size && (PAGE_SIZE - len)) {
- hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
- PAGE_SIZE - len, 1);
- len = strlen(buf);
- if (PAGE_SIZE - len)
- buf[len++] = '\n';
-
- ofs += 16;
- size -= min(size, 16U);
- }
-
- return len;
-}
-
-static ssize_t store_measurement(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct ieee80211_measurement_params params = {
- .channel = le16_to_cpu(ctx->active.channel),
- .start_time = cpu_to_le64(priv->_3945.last_tsf),
- .duration = cpu_to_le16(1),
- };
- u8 type = IWL_MEASURE_BASIC;
- u8 buffer[32];
- u8 channel;
-
- if (count) {
- char *p = buffer;
- strncpy(buffer, buf, min(sizeof(buffer), count));
- channel = simple_strtoul(p, NULL, 0);
- if (channel)
- params.channel = channel;
-
- p = buffer;
- while (*p && *p != ' ')
- p++;
- if (*p)
- type = simple_strtoul(p + 1, NULL, 0);
- }
-
- IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
- "channel %d (for '%s')\n", type, params.channel, buf);
- iwl3945_get_measurement(priv, ¶ms, type);
-
- return count;
-}
-
-static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
- show_measurement, store_measurement);
-
-static ssize_t store_retry_rate(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- priv->retry_rate = simple_strtoul(buf, NULL, 0);
- if (priv->retry_rate <= 0)
- priv->retry_rate = 1;
-
- return count;
-}
-
-static ssize_t show_retry_rate(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "%d", priv->retry_rate);
-}
-
-static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
- store_retry_rate);
-
-
-static ssize_t show_channels(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- /* all this shit doesn't belong into sysfs anyway */
- return 0;
-}
-
-static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
-
-static ssize_t show_antenna(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", iwl3945_mod_params.antenna);
-}
-
-static ssize_t store_antenna(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
- int ant;
-
- if (count == 0)
- return 0;
-
- if (sscanf(buf, "%1i", &ant) != 1) {
- IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
- return count;
- }
-
- if ((ant >= 0) && (ant <= 2)) {
- IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
- iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
- } else
- IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
-
-
- return count;
-}
-
-static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
-
-static ssize_t show_status(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- if (!iwl_is_alive(priv))
- return -EAGAIN;
- return sprintf(buf, "0x%08x\n", (int)priv->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-
-static ssize_t dump_error_log(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = (char *)buf;
-
- if (p[0] == '1')
- iwl3945_dump_nic_error_log(priv);
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
-
-/*****************************************************************************
- *
- * driver setup and tear down
- *
- *****************************************************************************/
-
-static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
-{
- priv->workqueue = create_singlethread_workqueue(DRV_NAME);
-
- init_waitqueue_head(&priv->wait_command_queue);
-
- INIT_WORK(&priv->restart, iwl3945_bg_restart);
- INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
- INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
- INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
- INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
- INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
-
- iwl_setup_scan_deferred_work(priv);
-
- iwl3945_hw_setup_deferred_work(priv);
-
- init_timer(&priv->watchdog);
- priv->watchdog.data = (unsigned long)priv;
- priv->watchdog.function = iwl_bg_watchdog;
-
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- iwl3945_irq_tasklet, (unsigned long)priv);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv)
-{
- iwl3945_hw_cancel_deferred_work(priv);
-
- cancel_delayed_work_sync(&priv->init_alive_start);
- cancel_delayed_work(&priv->alive_start);
- cancel_work_sync(&priv->beacon_update);
-
- iwl_cancel_scan_deferred_work(priv);
-}
-
-static struct attribute *iwl3945_sysfs_entries[] = {
- &dev_attr_antenna.attr,
- &dev_attr_channels.attr,
- &dev_attr_dump_errors.attr,
- &dev_attr_flags.attr,
- &dev_attr_filter_flags.attr,
- &dev_attr_measurement.attr,
- &dev_attr_retry_rate.attr,
- &dev_attr_status.attr,
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group iwl3945_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = iwl3945_sysfs_entries,
-};
-
-struct ieee80211_ops iwl3945_hw_ops = {
- .tx = iwl3945_mac_tx,
- .start = iwl3945_mac_start,
- .stop = iwl3945_mac_stop,
- .add_interface = iwl_mac_add_interface,
- .remove_interface = iwl_mac_remove_interface,
- .change_interface = iwl_mac_change_interface,
- .config = iwl_legacy_mac_config,
- .configure_filter = iwl3945_configure_filter,
- .set_key = iwl3945_mac_set_key,
- .conf_tx = iwl_mac_conf_tx,
- .reset_tsf = iwl_legacy_mac_reset_tsf,
- .bss_info_changed = iwl_legacy_mac_bss_info_changed,
- .hw_scan = iwl_mac_hw_scan,
- .sta_add = iwl3945_mac_sta_add,
- .sta_remove = iwl_mac_sta_remove,
- .tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static int iwl3945_init_drv(struct iwl_priv *priv)
-{
- int ret;
- struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
- priv->retry_rate = 1;
- priv->beacon_skb = NULL;
-
- spin_lock_init(&priv->sta_lock);
- spin_lock_init(&priv->hcmd_lock);
-
- INIT_LIST_HEAD(&priv->free_frames);
-
- mutex_init(&priv->mutex);
- mutex_init(&priv->sync_cmd_mutex);
-
- priv->ieee_channels = NULL;
- priv->ieee_rates = NULL;
- priv->band = IEEE80211_BAND_2GHZ;
-
- priv->iw_mode = NL80211_IFTYPE_STATION;
- priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
-
- /* initialize force reset */
- priv->force_reset[IWL_RF_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_RF_RESET;
- priv->force_reset[IWL_FW_RESET].reset_duration =
- IWL_DELAY_NEXT_FORCE_FW_RELOAD;
-
-
- priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
- priv->tx_power_next = IWL_DEFAULT_TX_POWER;
-
- if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
- IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
- eeprom->version);
- ret = -EINVAL;
- goto err;
- }
- ret = iwl_init_channel_map(priv);
- if (ret) {
- IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- /* Set up txpower settings in driver for all channels */
- if (iwl3945_txpower_set_from_eeprom(priv)) {
- ret = -EIO;
- goto err_free_channel_map;
- }
-
- ret = iwlcore_init_geos(priv);
- if (ret) {
- IWL_ERR(priv, "initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
- iwl3945_init_hw_rates(priv, priv->ieee_rates);
-
- return 0;
-
-err_free_channel_map:
- iwl_free_channel_map(priv);
-err:
- return ret;
-}
-
-#define IWL3945_MAX_PROBE_REQUEST 200
-
-static int iwl3945_setup_mac(struct iwl_priv *priv)
-{
- int ret;
- struct ieee80211_hw *hw = priv->hw;
-
- hw->rate_control_algorithm = "iwl-3945-rs";
- hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
- hw->vif_data_size = sizeof(struct iwl_vif_priv);
-
- /* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SPECTRUM_MGMT;
-
- if (!priv->cfg->base_params->broken_powersave)
- hw->flags |= IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
-
- hw->wiphy->interface_modes =
- priv->contexts[IWL_RXON_CTX_BSS].interface_modes;
-
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
-
- hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
- /* we create the 802.11 header and a zero-length SSID element */
- hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2;
-
- /* Default value; 4 EDCA QOS priorities */
- hw->queues = 4;
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &priv->bands[IEEE80211_BAND_2GHZ];
-
- if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
- priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &priv->bands[IEEE80211_BAND_5GHZ];
-
- iwl_leds_init(priv);
-
- ret = ieee80211_register_hw(priv->hw);
- if (ret) {
- IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
- return ret;
- }
- priv->mac80211_registered = 1;
-
- return 0;
-}
-
-static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int err = 0, i;
- struct iwl_priv *priv;
- struct ieee80211_hw *hw;
- struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
- struct iwl3945_eeprom *eeprom;
- unsigned long flags;
-
- /***********************
- * 1. Allocating HW data
- * ********************/
-
- /* mac80211 allocates memory for this device instance, including
- * space for this driver's private structure */
- hw = iwl_alloc_all(cfg);
- if (hw == NULL) {
- pr_err("Can not allocate network device\n");
- err = -ENOMEM;
- goto out;
- }
- priv = hw->priv;
- SET_IEEE80211_DEV(hw, &pdev->dev);
-
- priv->cmd_queue = IWL39_CMD_QUEUE_NUM;
-
- /* 3945 has only one valid context */
- priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
-
- for (i = 0; i < NUM_IWL_RXON_CTX; i++)
- priv->contexts[i].ctxid = i;
-
- priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
- priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
- priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
- priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
- priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
- priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
- priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC);
- priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
- priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
- priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
-
- /*
- * Disabling hardware scan means that mac80211 will perform scans
- * "the hard way", rather than using device's scan.
- */
- if (iwl3945_mod_params.disable_hw_scan) {
- dev_printk(KERN_DEBUG, &(pdev->dev),
- "sw scan support is deprecated\n");
- iwl3945_hw_ops.hw_scan = NULL;
- }
-
-
- IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
- priv->cfg = cfg;
- priv->pci_dev = pdev;
- priv->inta_mask = CSR_INI_SET_MASK;
-
- if (iwl_alloc_traffic_mem(priv))
- IWL_ERR(priv, "Not enough memory to generate traffic log\n");
-
- /***************************
- * 2. Initializing PCI bus
- * *************************/
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
- if (pci_enable_device(pdev)) {
- err = -ENODEV;
- goto out_ieee80211_free_hw;
- }
-
- pci_set_master(pdev);
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- IWL_WARN(priv, "No suitable DMA available.\n");
- goto out_pci_disable_device;
- }
-
- pci_set_drvdata(pdev, priv);
- err = pci_request_regions(pdev, DRV_NAME);
- if (err)
- goto out_pci_disable_device;
-
- /***********************
- * 3. Read REV Register
- * ********************/
- priv->hw_base = pci_iomap(pdev, 0, 0);
- if (!priv->hw_base) {
- err = -ENODEV;
- goto out_pci_release_regions;
- }
-
- IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
- (unsigned long long) pci_resource_len(pdev, 0));
- IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
-
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_write_config_byte(pdev, 0x41, 0x00);
-
- /* these spin locks will be used in apm_ops.init and EEPROM access
- * we should init now
- */
- spin_lock_init(&priv->reg_lock);
- spin_lock_init(&priv->lock);
-
- /*
- * stop and reset the on-board processor just in case it is in a
- * strange state ... like being left stranded by a primary kernel
- * and this is now the kdump kernel trying to start up
- */
- iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /***********************
- * 4. Read EEPROM
- * ********************/
-
- /* Read the EEPROM */
- err = iwl_eeprom_init(priv);
- if (err) {
- IWL_ERR(priv, "Unable to init EEPROM\n");
- goto out_iounmap;
- }
- /* MAC Address location in EEPROM same for 3945/4965 */
- eeprom = (struct iwl3945_eeprom *)priv->eeprom;
- IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address);
- SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address);
-
- /***********************
- * 5. Setup HW Constants
- * ********************/
- /* Device-specific setup */
- if (iwl3945_hw_set_hw_params(priv)) {
- IWL_ERR(priv, "failed to set hw settings\n");
- goto out_eeprom_free;
- }
-
- /***********************
- * 6. Setup priv
- * ********************/
-
- err = iwl3945_init_drv(priv);
- if (err) {
- IWL_ERR(priv, "initializing driver failed\n");
- goto out_unset_hw_params;
- }
-
- IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
- priv->cfg->name);
-
- /***********************
- * 7. Setup Services
- * ********************/
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pci_enable_msi(priv->pci_dev);
-
- err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
- IRQF_SHARED, DRV_NAME, priv);
- if (err) {
- IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
- goto out_disable_msi;
- }
-
- err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
- if (err) {
- IWL_ERR(priv, "failed to create sysfs device attributes\n");
- goto out_release_irq;
- }
-
- iwl_set_rxon_channel(priv,
- &priv->bands[IEEE80211_BAND_2GHZ].channels[5],
- &priv->contexts[IWL_RXON_CTX_BSS]);
- iwl3945_setup_deferred_work(priv);
- iwl3945_setup_rx_handlers(priv);
- iwl_power_initialize(priv);
-
- /*********************************
- * 8. Setup and Register mac80211
- * *******************************/
-
- iwl_enable_interrupts(priv);
-
- err = iwl3945_setup_mac(priv);
- if (err)
- goto out_remove_sysfs;
-
- err = iwl_dbgfs_register(priv, DRV_NAME);
- if (err)
- IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
- /* Start monitoring the killswitch */
- queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
- 2 * HZ);
-
- return 0;
-
- out_remove_sysfs:
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
- sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
- out_release_irq:
- free_irq(priv->pci_dev->irq, priv);
- out_disable_msi:
- pci_disable_msi(priv->pci_dev);
- iwlcore_free_geos(priv);
- iwl_free_channel_map(priv);
- out_unset_hw_params:
- iwl3945_unset_hw_params(priv);
- out_eeprom_free:
- iwl_eeprom_free(priv);
- out_iounmap:
- pci_iounmap(pdev, priv->hw_base);
- out_pci_release_regions:
- pci_release_regions(pdev);
- out_pci_disable_device:
- pci_set_drvdata(pdev, NULL);
- pci_disable_device(pdev);
- out_ieee80211_free_hw:
- iwl_free_traffic_mem(priv);
- ieee80211_free_hw(priv->hw);
- out:
- return err;
-}
-
-static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
-{
- struct iwl_priv *priv = pci_get_drvdata(pdev);
- unsigned long flags;
-
- if (!priv)
- return;
-
- IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
-
- iwl_dbgfs_unregister(priv);
-
- set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- iwl_leds_exit(priv);
-
- if (priv->mac80211_registered) {
- ieee80211_unregister_hw(priv->hw);
- priv->mac80211_registered = 0;
- } else {
- iwl3945_down(priv);
- }
-
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with iwl_down(), but there are paths to
- * run iwl_down() without calling apm_ops.stop(), and there are
- * paths to avoid running iwl_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
- iwl_apm_stop(priv);
-
- /* make sure we flush any pending irq or
- * tasklet for the driver
- */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwl_synchronize_irq(priv);
-
- sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
-
- cancel_delayed_work_sync(&priv->_3945.rfkill_poll);
-
- iwl3945_dealloc_ucode_pci(priv);
-
- if (priv->rxq.bd)
- iwl3945_rx_queue_free(priv, &priv->rxq);
- iwl3945_hw_txq_ctx_free(priv);
-
- iwl3945_unset_hw_params(priv);
-
- /*netif_stop_queue(dev); */
- flush_workqueue(priv->workqueue);
-
- /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
- * priv->workqueue... so we can't take down the workqueue
- * until now... */
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
- iwl_free_traffic_mem(priv);
-
- free_irq(pdev->irq, priv);
- pci_disable_msi(pdev);
-
- pci_iounmap(pdev, priv->hw_base);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
-
- iwl_free_channel_map(priv);
- iwlcore_free_geos(priv);
- kfree(priv->scan_cmd);
- if (priv->beacon_skb)
- dev_kfree_skb(priv->beacon_skb);
-
- ieee80211_free_hw(priv->hw);
-}
-
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-static struct pci_driver iwl3945_driver = {
- .name = DRV_NAME,
- .id_table = iwl3945_hw_card_ids,
- .probe = iwl3945_pci_probe,
- .remove = __devexit_p(iwl3945_pci_remove),
- .driver.pm = IWL_PM_OPS,
-};
-
-static int __init iwl3945_init(void)
-{
-
- int ret;
- pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
- pr_info(DRV_COPYRIGHT "\n");
-
- ret = iwl3945_rate_control_register();
- if (ret) {
- pr_err("Unable to register rate control algorithm: %d\n", ret);
- return ret;
- }
-
- ret = pci_register_driver(&iwl3945_driver);
- if (ret) {
- pr_err("Unable to initialize PCI module\n");
- goto error_register;
- }
-
- return ret;
-
-error_register:
- iwl3945_rate_control_unregister();
- return ret;
-}
-
-static void __exit iwl3945_exit(void)
-{
- pci_unregister_driver(&iwl3945_driver);
- iwl3945_rate_control_unregister();
-}
-
-MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
-
-module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
-MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto,
- "using software crypto (default 1 [software])\n");
-#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
- int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
- "disable hardware scanning (default 0) (deprecated)");
-module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
-
-module_exit(iwl3945_exit);
-module_init(iwl3945_init);
--
1.7.0.4
During uCode loading, if the reply_alive come back with "failure",
try to load the same uCode again.
Signed-off-by: Wey-Yi Guy <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index abd0461..c04d991 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -466,6 +466,15 @@ static void iwl_rx_reply_alive(struct iwl_priv *priv,
IWL_WARN(priv, "%s uCode did not respond OK.\n",
(palive->ver_subtype == INITIALIZE_SUBTYPE) ?
"init" : "runtime");
+ /*
+ * If fail to load init uCode,
+ * let's try to load the init uCode again.
+ * We should not get into this situation, but if it
+ * does happen, we should not move on and loading "runtime"
+ * without proper calibrate the device.
+ */
+ if (palive->ver_subtype == INITIALIZE_SUBTYPE)
+ priv->ucode_type = UCODE_NONE;
queue_work(priv->workqueue, &priv->restart);
}
}
--
1.7.0.4
On Sun, 2011-04-24 at 10:13 +0200, Johannes Berg wrote:
> On Sat, 2011-04-23 at 15:40 +0300, Maxim Levitsky wrote:
>
> > > This one came to me as a surprise, I updated the kernel, and whoops, the
> > > wireless led, blinks all the time!
> > > It turns out that in splitted driver iwl3945 doesn't have any led
> > > support, and indeed the light on my notebook doesn't change state often.
> > > It ether doesn't light up at all, or just blinks at constant rate.
> > OK, found the cause, it is dead simple, and in fact affects all intel
> > wireless card.
> > I wonder how such bug could escape unnoticed.
> > Nobody uses linux these days I guess.... :-(
>
> Wow, so you're one of the people who think the LED blinking is the most
> important thing... good job...
Good job to you for insulting peoples.
>
> Anyhow this was intentional, it's supposed to blink in that mode
> according to the product documentation. If you don't like it, you can
> now override it in sysfs.
>
> johannes
>
You mean, led is supposed to constantly blink while there is no traffic?
You are kidding aren't you?
At least led doesn't behave like that on any other wireless card, nor it
does in windows
--
Best regards,
Maxim Levitsky
Visit my blog: http://maximlevitsky.wordpress.com
Warning: Above blog contains rants.
On Sat, 2011-04-23 at 15:40 +0300, Maxim Levitsky wrote:
> > This one came to me as a surprise, I updated the kernel, and whoops, the
> > wireless led, blinks all the time!
> > It turns out that in splitted driver iwl3945 doesn't have any led
> > support, and indeed the light on my notebook doesn't change state often.
> > It ether doesn't light up at all, or just blinks at constant rate.
> OK, found the cause, it is dead simple, and in fact affects all intel
> wireless card.
> I wonder how such bug could escape unnoticed.
> Nobody uses linux these days I guess.... :-(
Wow, so you're one of the people who think the LED blinking is the most
important thing... good job...
Anyhow this was intentional, it's supposed to blink in that mode
according to the product documentation. If you don't like it, you can
now override it in sysfs.
johannes
Hi Maxim
On Sat, 2011-04-23 at 05:40 -0700, Maxim Levitsky wrote:
> On Sat, 2011-04-23 at 14:35 +0300, Maxim Levitsky wrote:
> > On Mon, 2011-02-21 at 11:06 -0800, Wey-Yi Guy wrote:
> OK, found the cause, it is dead simple, and in fact affects all intel
> wireless card.
> I wonder how such bug could escape unnoticed.
> Nobody uses linux these days I guess.... :-(
>
>
> The problem is in iwl-led.c in both drivers.
> It defines a blink table for new generi rate based blink support (yay!)
> but first entry is negative, and code in mac layer uses it.
> Why? Beats me.
>
> The code in mac does this:
>
> on = 1;
> off = 0;
>
> for (i = tpt_trig->blink_table_len - 1; i >= 0; i--) {
> if (tpt_trig->blink_table[i].throughput < 0 ||
> tpt > tpt_trig->blink_table[i].throughput) {
> off = tpt_trig->blink_table[i].blink_time / 2;
> on = tpt_trig->blink_table[i].blink_time - off;
> break;
> }
> }
>
>
> So it takes ether entry that is smaller that current one or negative,
> and iterates from end to start.
>
>
>
>
> I am note sure why you have the X - 1 pattern in the iwl-led.c
> Not sending a patch because not sure what were the intentions of this
> code.
> For me removing -1s works fine.
>
>
Good catch, thanks, this behavior changed was cause by
commit 843f26f06a41c5797f19e843c23ca4ed2a71a0bc
Author: Johannes Berg <[email protected]>
Date: Wed Dec 15 07:30:01 2010 -0800
iwlwifi: use mac80211 throughput trigger
-static const struct {
- u16 tpt; /* Mb/s */
- u8 on_time;
- u8 off_time;
-} blink_tbl[] =
-{
- {300, 25, 25},
- {200, 40, 40},
- {100, 55, 55},
- {70, 65, 65},
- {50, 75, 75},
- {20, 85, 85},
- {10, 95, 95},
- {5, 110, 110},
- {1, 130, 130},
- {0, 167, 167},
- /* SOLID_ON */
- {-1, IWL_LED_SOLID, 0}
+static const struct ieee80211_tpt_blink iwl_blink[] = {
+ { .throughput = 0 * 1024 - 1, .blink_time = 334 },
+ { .throughput = 1 * 1024 - 1, .blink_time = 260 },
+ { .throughput = 5 * 1024 - 1, .blink_time = 220 },
+ { .throughput = 10 * 1024 - 1, .blink_time = 190 },
+ { .throughput = 20 * 1024 - 1, .blink_time = 170 },
+ { .throughput = 50 * 1024 - 1, .blink_time = 150 },
+ { .throughput = 70 * 1024 - 1, .blink_time = 130 },
+ { .throughput = 100 * 1024 - 1, .blink_time = 110 },
+ { .throughput = 200 * 1024 - 1, .blink_time = 80 },
+ { .throughput = 300 * 1024 - 1, .blink_time = 50 },
};
For negative, the LED should be SOLID_ON.
I will push patch to fix this.
ALso, I agree both _agn and 3945/4965 use the same "iwl_led.c" is
confuse. I will change that.
Thanks
On Sun, 2011-04-24 at 12:46 +0300, Maxim Levitsky wrote:
> > > I wonder how such bug could escape unnoticed.
> > > Nobody uses linux these days I guess.... :-(
> >
> > Wow, so you're one of the people who think the LED blinking is the most
> > important thing... good job...
> Good job to you for insulting peoples.
You're right I guess, that was uncalled for, sorry. Do you really
believe nobody uses Linux? :-)
> > Anyhow this was intentional, it's supposed to blink in that mode
> > according to the product documentation. If you don't like it, you can
> > now override it in sysfs.
> You mean, led is supposed to constantly blink while there is no traffic?
> You are kidding aren't you?
> At least led doesn't behave like that on any other wireless card, nor it
> does in windows
No, I'm not kidding, I know that I looked this up in the product
documentation when I wrote the patch that Wey-Yi referred to. I didn't
look at the 3945/4965, but the second generation AGN (5000+, 6000+ etc)
hw is supposed to behave that way, and later (1000+ or so?) are supposed
to just have on/off with the radio (by default).
Anyhow, I don't much care what happens to iwlegacy.
johannes
On Sat, 2011-04-23 at 14:35 +0300, Maxim Levitsky wrote:
> On Mon, 2011-02-21 at 11:06 -0800, Wey-Yi Guy wrote:
> > From: Meenakshi Venkataraman <[email protected]>
> >
> > Intel WiFi devices 3945 and 4965 now have their own driver in the folder
> >
> > drivers/net/wireless/iwlegacy
> >
> > Add support to build these drivers independently of the driver for
> > AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko,
> > and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko
> > contains code shared between both devices.
> >
> > The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3
> > ABGN device.
>
> This one came to me as a surprise, I updated the kernel, and whoops, the
> wireless led, blinks all the time!
> It turns out that in splitted driver iwl3945 doesn't have any led
> support, and indeed the light on my notebook doesn't change state often.
> It ether doesn't light up at all, or just blinks at constant rate.
OK, found the cause, it is dead simple, and in fact affects all intel
wireless card.
I wonder how such bug could escape unnoticed.
Nobody uses linux these days I guess.... :-(
The problem is in iwl-led.c in both drivers.
It defines a blink table for new generi rate based blink support (yay!)
but first entry is negative, and code in mac layer uses it.
Why? Beats me.
The code in mac does this:
on = 1;
off = 0;
for (i = tpt_trig->blink_table_len - 1; i >= 0; i--) {
if (tpt_trig->blink_table[i].throughput < 0 ||
tpt > tpt_trig->blink_table[i].throughput) {
off = tpt_trig->blink_table[i].blink_time / 2;
on = tpt_trig->blink_table[i].blink_time - off;
break;
}
}
So it takes ether entry that is smaller that current one or negative,
and iterates from end to start.
I am note sure why you have the X - 1 pattern in the iwl-led.c
Not sending a patch because not sure what were the intentions of this
code.
For me removing -1s works fine.
--
Best regards,
Maxim Levitsky
Visit my blog: http://maximlevitsky.wordpress.com
Warning: Above blog contains rants.
On Mon, 2011-02-21 at 11:06 -0800, Wey-Yi Guy wrote:
> From: Meenakshi Venkataraman <[email protected]>
>
> Intel WiFi devices 3945 and 4965 now have their own driver in the folder
>
> drivers/net/wireless/iwlegacy
>
> Add support to build these drivers independently of the driver for
> AGN devices. Selecting the 3945 builds iwl3945.ko and iwl_legacy.ko,
> and selecting the 4965 builds iwl4965.ko and iwl_legacy.ko. iwl-legacy.ko
> contains code shared between both devices.
>
> The 3945 is an ABG/BG device, with no support for 802.11n. The 4965 is a 2x3
> ABGN device.
This one came to me as a surprise, I updated the kernel, and whoops, the
wireless led, blinks all the time!
It turns out that in splitted driver iwl3945 doesn't have any led
support, and indeed the light on my notebook doesn't change state often.
It ether doesn't light up at all, or just blinks at constant rate.
I have iwl3945.
Best regards,
Maxim Levitsky