Enable VHT support for IBSS, while mac80211/cfg80211 and
wpa_supplicant already support this.
In my test env, ath10k 2x2 I get:
(udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
(tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
During tests I used wpa_supplicant (current version), which
already support IBSS VHT, and choose highest available BW.
Signed-off-by: Janusz Dziedzic <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f4de717..14a8f25 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6949,6 +6949,8 @@ int ath10k_mac_register(struct ath10k *ar)
goto err_free;
}
+ wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
+
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
--
1.9.1
On 06/10/2015 11:33 PM, Janusz Dziedzic wrote:
> 2015-06-11 8:32 GMT+02:00 Sangwoo Moon <[email protected]>:
>> Hello,
>>
>> I have successfully installed the latest version of ath10k driver from
>> backports.
>>
>> However, I have some difficulties on configuring wpa_supplicant for IBSS VHT
>> mode.
>> Looked at wpa_supplicant configuration file, but I couldn't found any option
>> related to explicit setting VHT (though I've found disable_vht instead)
>>
>> Sorry for annoying questions, but can you help this out?
>> At least you could let me know your configuration of wpa_supplicant.
>>
> supplicant by default setup wildest BW, no special parameter required
> for IBSS VHT
>
> network = {
> ssid="ibss"
> mode=1
> key_mgmt=NONE
> frequency=5180
> }
>
> Just use latest version of wpa_supplicant.
> next check you have 80MHz BW
> iw wlan0 info
Make sure you compile supplicant with this option enabled:
CONFIG_IBSS_RSN=y
I think only particular firmware versions are doing to do IBSS as well.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
Janusz Dziedzic <[email protected]> writes:
> On 11 June 2015 at 16:15, Kalle Valo <[email protected]> wrote:
>> Janusz Dziedzic <[email protected]> writes:
>>
>>> Enable VHT support for IBSS, while mac80211/cfg80211 and
>>> wpa_supplicant already support this.
>>>
>>> In my test env, ath10k 2x2 I get:
>>> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
>>> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>>
>> What hw and firmware version? Do you expect this to work with both
>> qca988x and qca6174?
>
> Results are for qca9888x.
> But IBSS (VHT IBSS) works correctly also with qca6174 FW.
Ok, thanks. I added this info to the commit log in the pending branch.
>> Oh, we should still add ATH10K_FW_FEATURE_NO_ADHOC so that we can
>> disable ad-hoc on 10.x firmwares. Anyone have some spare time to cook up
>> a patch?
>>
> I am not sure we need this, while we add
> ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC)
> only for main and tlv version. Seems we already cover 10.x case correctly.
Ah, I had forgotten that. Good that we have that.
--
Kalle Valo
On 06/11/2015 10:12 PM, Janusz Dziedzic wrote:
> On 11 June 2015 at 16:15, Kalle Valo <[email protected]> wrote:
>> Janusz Dziedzic <[email protected]> writes:
>>
>>> Enable VHT support for IBSS, while mac80211/cfg80211 and
>>> wpa_supplicant already support this.
>>>
>>> In my test env, ath10k 2x2 I get:
>>> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
>>> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>>
>> What hw and firmware version? Do you expect this to work with both
>> qca988x and qca6174?
>>
> Results are for qca9888x.
> But IBSS (VHT IBSS) works correctly also with qca6174 FW.
>
>> Oh, we should still add ATH10K_FW_FEATURE_NO_ADHOC so that we can
>> disable ad-hoc on 10.x firmwares. Anyone have some spare time to cook up
>> a patch?
>>
> I am not sure we need this, while we add
> ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC)
> only for main and tlv version. Seems we already cover 10.x case correctly.
If you give me some way to advertise my CT 10.1 firmware supports ADHOC
mode in the upstream driver then there will be one more firmware
variant that works with IBSS in stock kernels....
Maybe a feature flag 'ATH10K_FW_FEATURE_SUPPORTS_ADHOC' ? You can special case
older firmware that is known to support ADHOC but has no feature
flag for it. And new firmware could add the feature flag as needed.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
Janusz Dziedzic <[email protected]> writes:
> Enable VHT support for IBSS, while mac80211/cfg80211 and
> wpa_supplicant already support this.
>
> In my test env, ath10k 2x2 I get:
> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>
> During tests I used wpa_supplicant (current version), which
> already support IBSS VHT, and choose highest available BW.
>
> Signed-off-by: Janusz Dziedzic <[email protected]>
Thanks, applied.
--
Kalle Valo
On 10 June 2015 at 20:04, Sangwoo Moon <[email protected]> wrote:
> Hello,
>
> Thanks much for your help.
> However, I have looked at my driver code and
> did not find any implementations such as wiphy_ext_feature_set()
> or NL80211_EXT_FEATURE_VHT_IBSS.
> It seems not simple to apply your patch into my version of ath10k device
> driver.
> I am currently using backports-3.16-rc1-1 for ath10k device driver code
> in order to match the kernel version v3.16 for Ubuntu 14.04.02.
>
You can use newest backports with older kernel (new
mac80211/cfg80211/drivers with old kernel).
Or you can build and install new kernel for Ubuntu.
I am using https://github.com/kvalo/ath
BR
Janusz
> Could you tell me the version of kernel and ath10k device driver of your
> test configuration?
> Or is there any way to apply your version of patch code into linux kernel
> v3.16?
> (I expect the version will be much more recent one than mine)
>
> Thanks,
> --Sangwoo Moon
>
> 2015-06-10 14:14에 Janusz Dziedzic이(가) 작성한 내용:
>
>> Enable VHT support for IBSS, while mac80211/cfg80211 and
>> wpa_supplicant already support this.
>>
>> In my test env, ath10k 2x2 I get:
>> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
>> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>>
>> During tests I used wpa_supplicant (current version), which
>> already support IBSS VHT, and choose highest available BW.
>>
>> Signed-off-by: Janusz Dziedzic <[email protected]>
>> ---
>> drivers/net/wireless/ath/ath10k/mac.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
>> b/drivers/net/wireless/ath/ath10k/mac.c
>> index f4de717..14a8f25 100644
>> --- a/drivers/net/wireless/ath/ath10k/mac.c
>> +++ b/drivers/net/wireless/ath/ath10k/mac.c
>> @@ -6949,6 +6949,8 @@ int ath10k_mac_register(struct ath10k *ar)
>> goto err_free;
>> }
>>
>> + wiphy_ext_feature_set(ar->hw->wiphy,
>> NL80211_EXT_FEATURE_VHT_IBSS);
>> +
>> /*
>> * on LL hardware queues are managed entirely by the FW
>> * so we only advertise to mac we can do the queues thing
>
>
> --
> Sangwoo Moon, Ph.D. Candidate
> Dept. of EE, KAIST, Korea
> (Office) +82-42-350-5486, N1-#819
> (E-mail) swmoon at lanada.kaist.ac.kr
> (URL) http://lanada.kaist.ac.kr
> Gwahangno 335, Yuseong-Gu Daejeon, S. Korea 305-701
>
Hello,
I have successfully installed the latest version of ath10k driver from
backports.
However, I have some difficulties on configuring wpa_supplicant for IBSS
VHT mode.
Looked at wpa_supplicant configuration file, but I couldn't found any
option
related to explicit setting VHT (though I've found disable_vht instead)
Sorry for annoying questions, but can you help this out?
At least you could let me know your configuration of wpa_supplicant.
Thanks much,
--Sangwoo Moon
2015-06-11 13:28에 Janusz Dziedzic이(가) 작성한 내용:
> On 10 June 2015 at 20:04, Sangwoo Moon <[email protected]>
> wrote:
>> Hello,
>>
>> Thanks much for your help.
>> However, I have looked at my driver code and
>> did not find any implementations such as wiphy_ext_feature_set()
>> or NL80211_EXT_FEATURE_VHT_IBSS.
>> It seems not simple to apply your patch into my version of ath10k
>> device
>> driver.
>> I am currently using backports-3.16-rc1-1 for ath10k device driver
>> code
>> in order to match the kernel version v3.16 for Ubuntu 14.04.02.
>>
> You can use newest backports with older kernel (new
> mac80211/cfg80211/drivers with old kernel).
>
> Or you can build and install new kernel for Ubuntu.
> I am using https://github.com/kvalo/ath
>
> BR
> Janusz
>
>> Could you tell me the version of kernel and ath10k device driver of
>> your
>> test configuration?
>> Or is there any way to apply your version of patch code into linux
>> kernel
>> v3.16?
>> (I expect the version will be much more recent one than mine)
>>
>> Thanks,
>> --Sangwoo Moon
>>
>> 2015-06-10 14:14에 Janusz Dziedzic이(가) 작성한 내용:
>>
>>> Enable VHT support for IBSS, while mac80211/cfg80211 and
>>> wpa_supplicant already support this.
>>>
>>> In my test env, ath10k 2x2 I get:
>>> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
>>> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>>>
>>> During tests I used wpa_supplicant (current version), which
>>> already support IBSS VHT, and choose highest available BW.
>>>
>>> Signed-off-by: Janusz Dziedzic <[email protected]>
>>> ---
>>> drivers/net/wireless/ath/ath10k/mac.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
>>> b/drivers/net/wireless/ath/ath10k/mac.c
>>> index f4de717..14a8f25 100644
>>> --- a/drivers/net/wireless/ath/ath10k/mac.c
>>> +++ b/drivers/net/wireless/ath/ath10k/mac.c
>>> @@ -6949,6 +6949,8 @@ int ath10k_mac_register(struct ath10k *ar)
>>> goto err_free;
>>> }
>>>
>>> + wiphy_ext_feature_set(ar->hw->wiphy,
>>> NL80211_EXT_FEATURE_VHT_IBSS);
>>> +
>>> /*
>>> * on LL hardware queues are managed entirely by the FW
>>> * so we only advertise to mac we can do the queues thing
>>
>>
>> --
>> Sangwoo Moon, Ph.D. Candidate
>> Dept. of EE, KAIST, Korea
>> (Office) +82-42-350-5486, N1-#819
>> (E-mail) swmoon at lanada.kaist.ac.kr
>> (URL) http://lanada.kaist.ac.kr
>> Gwahangno 335, Yuseong-Gu Daejeon, S. Korea 305-701
>>
--
Sangwoo Moon, Ph.D. Candidate
Dept. of EE, KAIST, Korea
(Office) +82-42-350-5486, N1-#819
(E-mail) swmoon at lanada.kaist.ac.kr
(URL) http://lanada.kaist.ac.kr
Gwahangno 335, Yuseong-Gu Daejeon, S. Korea 305-701
Janusz Dziedzic <[email protected]> writes:
> Enable VHT support for IBSS, while mac80211/cfg80211 and
> wpa_supplicant already support this.
>
> In my test env, ath10k 2x2 I get:
> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
What hw and firmware version? Do you expect this to work with both
qca988x and qca6174?
Oh, we should still add ATH10K_FW_FEATURE_NO_ADHOC so that we can
disable ad-hoc on 10.x firmwares. Anyone have some spare time to cook up
a patch?
> During tests I used wpa_supplicant (current version)
Better to say "current git version" (if that's what you mean).
--
Kalle Valo
On 11 June 2015 at 16:15, Kalle Valo <[email protected]> wrote:
> Janusz Dziedzic <[email protected]> writes:
>
>> Enable VHT support for IBSS, while mac80211/cfg80211 and
>> wpa_supplicant already support this.
>>
>> In my test env, ath10k 2x2 I get:
>> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
>> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>
> What hw and firmware version? Do you expect this to work with both
> qca988x and qca6174?
>
Results are for qca9888x.
But IBSS (VHT IBSS) works correctly also with qca6174 FW.
> Oh, we should still add ATH10K_FW_FEATURE_NO_ADHOC so that we can
> disable ad-hoc on 10.x firmwares. Anyone have some spare time to cook up
> a patch?
>
I am not sure we need this, while we add
ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC)
only for main and tlv version. Seems we already cover 10.x case correctly.
>> During tests I used wpa_supplicant (current version)
>
> Better to say "current git version" (if that's what you mean).
>
> --
> Kalle Valo
Hello,
Thanks much for your help.
However, I have looked at my driver code and
did not find any implementations such as wiphy_ext_feature_set()
or NL80211_EXT_FEATURE_VHT_IBSS.
It seems not simple to apply your patch into my version of ath10k device
driver.
I am currently using backports-3.16-rc1-1 for ath10k device driver code
in order to match the kernel version v3.16 for Ubuntu 14.04.02.
Could you tell me the version of kernel and ath10k device driver of your
test configuration?
Or is there any way to apply your version of patch code into linux
kernel v3.16?
(I expect the version will be much more recent one than mine)
Thanks,
--Sangwoo Moon
2015-06-10 14:14에 Janusz Dziedzic이(가) 작성한 내용:
> Enable VHT support for IBSS, while mac80211/cfg80211 and
> wpa_supplicant already support this.
>
> In my test env, ath10k 2x2 I get:
> (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec
> (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec
>
> During tests I used wpa_supplicant (current version), which
> already support IBSS VHT, and choose highest available BW.
>
> Signed-off-by: Janusz Dziedzic <[email protected]>
> ---
> drivers/net/wireless/ath/ath10k/mac.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
> b/drivers/net/wireless/ath/ath10k/mac.c
> index f4de717..14a8f25 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -6949,6 +6949,8 @@ int ath10k_mac_register(struct ath10k *ar)
> goto err_free;
> }
>
> + wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
> +
> /*
> * on LL hardware queues are managed entirely by the FW
> * so we only advertise to mac we can do the queues thing
--
Sangwoo Moon, Ph.D. Candidate
Dept. of EE, KAIST, Korea
(Office) +82-42-350-5486, N1-#819
(E-mail) swmoon at lanada.kaist.ac.kr
(URL) http://lanada.kaist.ac.kr
Gwahangno 335, Yuseong-Gu Daejeon, S. Korea 305-701
2015-06-11 8:32 GMT+02:00 Sangwoo Moon <[email protected]>:
> Hello,
>
> I have successfully installed the latest version of ath10k driver from
> backports.
>
> However, I have some difficulties on configuring wpa_supplicant for IBSS VHT
> mode.
> Looked at wpa_supplicant configuration file, but I couldn't found any option
> related to explicit setting VHT (though I've found disable_vht instead)
>
> Sorry for annoying questions, but can you help this out?
> At least you could let me know your configuration of wpa_supplicant.
>
supplicant by default setup wildest BW, no special parameter required
for IBSS VHT
network = {
ssid="ibss"
mode=1
key_mgmt=NONE
frequency=5180
}
Just use latest version of wpa_supplicant.
next check you have 80MHz BW
iw wlan0 info
BR
Janusz