2015-09-01 02:56:22

by Pan, Miaoqing

Subject: [PATCH] ath9k: enable hw manual peak calibration for QCA9561

From: Miaoqing Pan <[email protected]>

This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.

Signed-off-by: Miaoqing Pan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 174442b..0c39199 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1249,7 +1249,8 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);

- if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
+ if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) ||
+ AR_SREV_9561(ah)) {
if (is_2g)
REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
@@ -1640,7 +1641,8 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,

skip_tx_iqcal:
if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
- if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
+ if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah) ||
+ AR_SREV_9561(ah)) {
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
--
1.9.1

2015-09-29 07:34:57

by Kalle Valo

Subject: Re: ath9k: enable hw manual peak calibration for QCA9561

> From: Miaoqing Pan <[email protected]>
>
> This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
> 2015-August/034979.html. As the peak detect calibration is set
> incorrectly.
>
> Signed-off-by: Miaoqing Pan <[email protected]>

Thanks, applied to wireless-drivers-next.git.

Kalle Valo