Hi,
Below the patch to include SRD as per ETSI EN 300 440-1
for NL.
Thanks,
- marcel
Signed-off-by: Anne Marcel Roorda <[email protected]>
diff --git a/db.txt b/db.txt
index e9ba21a..738e412 100644
--- a/db.txt
+++ b/db.txt
@@ -850,11 +850,18 @@ country NI: DFS-FCC
(5490 - 5730 @ 160), (24), DFS
(5735 - 5835 @ 80), (30)
+# Regulation on the use of frequency space without a license and
+# without notification 2015
+#
+# http://wetten.overheid.nl/BWBR0036378/2015-03-05
+
country NL: DFS-ETSI
(2402 - 2482 @ 40), (20)
(5170 - 5250 @ 80), (20), NO-OUTDOOR, AUTO-BW
(5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
(5490 - 5710 @ 160), (27), DFS
+ # short range devices (ETSI EN 300 440-1)
+ (5725 - 5875 @ 80), (25 mW)
# 60 GHz band channels 1-4, ref: Etsi En 302 567
(57000 - 66000 @ 2160), (40)
In message <20160422135529.GA109717@ubuntu-hedt>, Seth Forshee writes:
<Snip>
> I'm looking at the document you reference as translated by Google, and
> I'm not seeing anything there to support these changes. I can't find any
> reference to ETSI 300 440-1. The section which would appear to apply
> here (article 2 paragraph o) references Annex 11 for permitted frequency
> bands, and this does not include the range that you're adding.
>
> I didn't read the document in its entirety though, so I may have missed
> something. If so, could you please point me to the specific section
> which would permit operation in that range?
Please see "Bijlage 11" (Non specific SRD) Nr. J.
Thanks,
- marcel
On Fri, Apr 22, 2016 at 02:36:13PM +0200, Anne Marcel Roorda wrote:
>
> Hi,
>
> Below the patch to include SRD as per ETSI EN 300 440-1
> for NL.
>
> Thanks,
>
> - marcel
>
> Signed-off-by: Anne Marcel Roorda <[email protected]>
>
> diff --git a/db.txt b/db.txt
> index e9ba21a..738e412 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -850,11 +850,18 @@ country NI: DFS-FCC
> (5490 - 5730 @ 160), (24), DFS
> (5735 - 5835 @ 80), (30)
>
> +# Regulation on the use of frequency space without a license and
> +# without notification 2015
> +#
> +# http://wetten.overheid.nl/BWBR0036378/2015-03-05
> +
> country NL: DFS-ETSI
> (2402 - 2482 @ 40), (20)
> (5170 - 5250 @ 80), (20), NO-OUTDOOR, AUTO-BW
> (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
> (5490 - 5710 @ 160), (27), DFS
> + # short range devices (ETSI EN 300 440-1)
> + (5725 - 5875 @ 80), (25 mW)
> # 60 GHz band channels 1-4, ref: Etsi En 302 567
> (57000 - 66000 @ 2160), (40)
I'm looking at the document you reference as translated by Google, and
I'm not seeing anything there to support these changes. I can't find any
reference to ETSI 300 440-1. The section which would appear to apply
here (article 2 paragraph o) references Annex 11 for permitted frequency
bands, and this does not include the range that you're adding.
I didn't read the document in its entirety though, so I may have missed
something. If so, could you please point me to the specific section
which would permit operation in that range?
Thanks,
Seth
On 22-04-16 15:55, Seth Forshee wrote:
> On Fri, Apr 22, 2016 at 02:36:13PM +0200, Anne Marcel Roorda wrote:
>>
>> Hi,
>>
>> Below the patch to include SRD as per ETSI EN 300 440-1
>> for NL.
>>
>> Thanks,
>>
>> - marcel
>>
>> Signed-off-by: Anne Marcel Roorda <[email protected]>
>>
>> diff --git a/db.txt b/db.txt
>> index e9ba21a..738e412 100644
>> --- a/db.txt
>> +++ b/db.txt
>> @@ -850,11 +850,18 @@ country NI: DFS-FCC
>> (5490 - 5730 @ 160), (24), DFS
>> (5735 - 5835 @ 80), (30)
>>
>> +# Regulation on the use of frequency space without a license and
>> +# without notification 2015
>> +#
>> +# http://wetten.overheid.nl/BWBR0036378/2015-03-05
>> +
>> country NL: DFS-ETSI
>> (2402 - 2482 @ 40), (20)
>> (5170 - 5250 @ 80), (20), NO-OUTDOOR, AUTO-BW
>> (5250 - 5330 @ 80), (20), NO-OUTDOOR, DFS, AUTO-BW
>> (5490 - 5710 @ 160), (27), DFS
>> + # short range devices (ETSI EN 300 440-1)
>> + (5725 - 5875 @ 80), (25 mW)
>> # 60 GHz band channels 1-4, ref: Etsi En 302 567
>> (57000 - 66000 @ 2160), (40)
>
> I'm looking at the document you reference as translated by Google, and
> I'm not seeing anything there to support these changes. I can't find any
> reference to ETSI 300 440-1. The section which would appear to apply
> here (article 2 paragraph o) references Annex 11 for permitted frequency
> bands, and this does not include the range that you're adding.
It does. In Annex 11, subcat 1, there is entry J that specifies the range:
J 5725 ? 5875 MHz 25 mW e.i.r.p.
Regards,
Arend
> I didn't read the document in its entirety though, so I may have missed
> something. If so, could you please point me to the specific section
> which would permit operation in that range?
>
> Thanks,
> Seth
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On Fri, Apr 22, 2016 at 07:12:35PM +0200, Anne Marcel Roorda wrote:
>
> In message <20160422135529.GA109717@ubuntu-hedt>, Seth Forshee writes:
>
> <Snip>
>
> > I'm looking at the document you reference as translated by Google, and
> > I'm not seeing anything there to support these changes. I can't find any
> > reference to ETSI 300 440-1. The section which would appear to apply
> > here (article 2 paragraph o) references Annex 11 for permitted frequency
> > bands, and this does not include the range that you're adding.
> >
> > I didn't read the document in its entirety though, so I may have missed
> > something. If so, could you please point me to the specific section
> > which would permit operation in that range?
>
> Please see "Bijlage 11" (Non specific SRD) Nr. J.
I see it now. I know I looked at that section, so I must have overlooked
it. Thanks.
Seth
On Fri, Apr 22, 2016 at 02:36:13PM +0200, Anne Marcel Roorda wrote:
>
> Hi,
>
> Below the patch to include SRD as per ETSI EN 300 440-1
> for NL.
>
> Thanks,
>
> - marcel
>
> Signed-off-by: Anne Marcel Roorda <[email protected]>
Applied, thanks.