Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
unnecessary dependency for quite a large amount of the kernel. There's
very little which actually requires definitions from phy.h in net/dsa.h
- the include itself only wants the declaration of a couple of
structures and IFNAMSIZ.
Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to
mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h
and phy_fixed.h from net/dsa.h.
This patch reduces from around 800 files rebuilt to around 40 - even
with ccache, the time difference is noticable.
In order to make this change, several drivers need to be updated to
include necessary headers that they were picking up through this
include. This has resulted in a much larger patch series.
I'm assuming the 0-day builder has had 24 hours with this series, and
hasn't reported any further issues with it - the last issue was two
weeks ago (before I became ill) which I fixed over the last weekend.
I'm hoping this doesn't conflict with what's already in net-next...
arch/mips/cavium-octeon/octeon-platform.c | 4 ----
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 1 +
drivers/net/ethernet/broadcom/bgmac.c | 2 ++
drivers/net/ethernet/cadence/macb.h | 2 ++
drivers/net/ethernet/cavium/liquidio/lio_main.c | 1 +
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 1 +
drivers/net/ethernet/cavium/liquidio/octeon_console.c | 1 +
drivers/net/ethernet/freescale/fman/fman_memac.c | 1 +
drivers/net/ethernet/marvell/mvneta.c | 1 +
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
drivers/net/usb/lan78xx.c | 1 +
drivers/net/wireless/ath/ath5k/ahb.c | 2 +-
drivers/target/iscsi/iscsi_target_login.c | 1 +
include/net/dsa.h | 6 ++++--
net/core/netprio_cgroup.c | 1 +
net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
16 files changed, 20 insertions(+), 7 deletions(-)
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
unnecessary dependency for quite a large amount of the kernel. There's
very little which actually requires definitions from phy.h in net/dsa.h
- the include itself only wants the declaration of a couple of
structures and IFNAMSIZ.
Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to
mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h
and phy_fixed.h from net/dsa.h.
This patch reduces from around 800 files rebuilt to around 40 - even
with ccache, the time difference is noticable.
Tested-by: Vivien Didelot <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Russell King <[email protected]>
---
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 1 +
include/net/dsa.h | 6 ++++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
index af54baea47cf..3a949095068a 100644
--- a/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
@@ -15,6 +15,7 @@
#include <linux/if_vlan.h>
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
+#include <linux/phy.h>
#ifndef UINT64_MAX
#define UINT64_MAX (u64)(~((u64)0))
diff --git a/include/net/dsa.h b/include/net/dsa.h
index b122196d5a1f..887b2f98f9ea 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -11,15 +11,17 @@
#ifndef __LINUX_NET_DSA_H
#define __LINUX_NET_DSA_H
+#include <linux/if.h>
#include <linux/if_ether.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/of.h>
-#include <linux/phy.h>
-#include <linux/phy_fixed.h>
#include <linux/ethtool.h>
+struct phy_device;
+struct fixed_phy_status;
+
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = 0,
DSA_TAG_PROTO_DSA,
--
2.7.4
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c:58:12: error: dereferencing pointer to incomplete type 'struct phy_device'
Add linux/phy.h to emac-sgmii.c
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
index bf722a9bb09d..5e31fb7e4ab8 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
@@ -16,6 +16,7 @@
#include <linux/iopoll.h>
#include <linux/acpi.h>
#include <linux/of_device.h>
+#include <linux/phy.h>
#include "emac.h"
#include "emac-mac.h"
#include "emac-sgmii.h"
--
2.7.4
octeon-platform.c can not be built as a module for two reasons:
(a) the Makefile doesn't allow it:
obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
(b) the multiple *_initcall() statements, each of which are translated
to a module_init() call when attempting a module build, become
aliases to init_module(). Having more than one alias will cause a
build error.
Hence, rather than adding a linux/module.h include, remove the redundant
MODULE_*() from this file.
Acked-by: David Daney <[email protected]>
Signed-off-by: Russell King <[email protected]>
---
arch/mips/cavium-octeon/octeon-platform.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 37a932d9148c..8297ce714c5e 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -1060,7 +1060,3 @@ static int __init octeon_publish_devices(void)
return of_platform_bus_probe(NULL, octeon_ids, NULL);
}
arch_initcall(octeon_publish_devices);
-
-MODULE_AUTHOR("David Daney <[email protected]>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Platform driver for Octeon SOC");
--
2.7.4
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: type defaults to 'int' in declaration of 'MODULE_VERSION'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:36: error: expected ')' before 'int'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:37: error: expected ')' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: parameter names (without types) in function declaration
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: error: type defaults to 'int' in declaration of 'module_init'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: parameter names (without types) in function declaration
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: error: type defaults to 'int' in declaration of 'module_exit'
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: parameter names (without types) in function declaration
drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:36: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:37: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:38: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:39: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: type defaults to 'int' in declaration of 'MODULE_VERSION'
drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:40: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:41: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:42: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: expected declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:43: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: function declaration isn't a prototype
drivers/net/ethernet/cavium/liquidio/lio_main.c:46: error: expected ')' before 'int'
drivers/net/ethernet/cavium/liquidio/lio_main.c:48: error: expected ')' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:53: error: expected ')' before 'int'
drivers/net/ethernet/cavium/liquidio/lio_main.c:54: error: expected ')' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:57: error: expected ')' before 'sizeof'
drivers/net/ethernet/cavium/liquidio/lio_main.c:58: error: expected ')' before string constant
drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: data definitionhas no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:498: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE'
drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: parameter names (without types) in function declaration
drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_recv_vf_drv_notice':
drivers/net/ethernet/cavium/liquidio/lio_main.c:4393: error: implicit declaration of function 'try_module_get'
drivers/net/ethernet/cavium/liquidio/lio_main.c:4400: error: implicit declaration of function 'module_put'
drivers/net/ethernet/cavium/liquidio/lio_main.c: At top level:
drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: error: type defaults to 'int' in declaration of 'module_init'
drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: parameter names (without types) in function declaration
drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: data definition has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: error: type defaults to 'int' in declaration of 'module_exit'
drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: parameter names (without types) in function declaration
Add linux/module.h to both these files.
drivers/net/ethernet/cavium/liquidio/octeon_console.c:40:31: error: expected ')' before 'int'
drivers/net/ethernet/cavium/liquidio/octeon_console.c:42:4: error: expected ')' before string constant
Add linux/moduleparam.h to this file.
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/cavium/liquidio/lio_main.c | 1 +
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 1 +
drivers/net/ethernet/cavium/liquidio/octeon_console.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index 39a9665c9d00..e4dd39440687 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -15,6 +15,7 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more details.
***********************************************************************/
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <net/vxlan.h>
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index 70d96c10c673..b98d29827a0d 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -15,6 +15,7 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more details.
***********************************************************************/
+#include <linux/module.h>
#include <linux/pci.h>
#include <net/vxlan.h>
#include "liquidio_common.h"
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_console.c b/drivers/net/ethernet/cavium/liquidio/octeon_console.c
index 3265e0b7923e..964058c55d47 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_console.c
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_console.c
@@ -18,6 +18,7 @@
/**
* @file octeon_console.c
*/
+#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/crc32.h>
--
2.7.4
drivers/target/iscsi/iscsi_target_login.c:1135:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration]
Add linux/module.h to iscsi_target_login.c.
Signed-off-by: Russell King <[email protected]>
---
drivers/target/iscsi/iscsi_target_login.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index 450f51deb2a2..eab274d17b5c 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -17,6 +17,7 @@
******************************************************************************/
#include <crypto/hash.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <linux/kthread.h>
#include <linux/idr.h>
--
2.7.4
drivers/net/ethernet/marvell/mvneta.c:2694:26: error: storage size of 'status' isn't known
drivers/net/ethernet/marvell/mvneta.c:2695:26: error: storage size of 'changed' isn't known
drivers/net/ethernet/marvell/mvneta.c:2695:9: error: variable 'changed' has initializer but incomplete type
drivers/net/ethernet/marvell/mvneta.c:2709:2: error: implicit declaration of function 'fixed_phy_update_state' [-Werror=implicit-function-declaration]
Add linux/phy_fixed.h to mvneta.c
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e05e22705cf7..eb0eb3e62ca0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -28,6 +28,7 @@
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/skbuff.h>
#include <net/hwbm.h>
--
2.7.4
On 01/31/2017 01:19 PM, Russell King wrote:
> drivers/net/ethernet/qualcomm/emac/emac-sgmii.c:58:12: error: dereferencing pointer to incomplete type 'struct phy_device'
>
> Add linux/phy.h to emac-sgmii.c
>
> Signed-off-by: Russell King <[email protected]>
> ---
> drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
The version of emac-sgmii.c on net-next does not need this fixed. I already
removed all references to phy_device in commit "net: qcom/emac: always use
autonegotiation to configure the SGMII link".
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
drivers/net/ethernet/cadence/macb.h:862:33: sparse: expected ; at end of declaration
drivers/net/ethernet/cadence/macb.h:862:33: sparse: Expected } at end of struct-union-enum-specifier
drivers/net/ethernet/cadence/macb.h:862:33: sparse: got phy_interface
drivers/net/ethernet/cadence/macb.h:877:1: sparse: Expected ; at the end of type declaration
drivers/net/ethernet/cadence/macb.h:877:1: sparse: got }
In file included from drivers/net/ethernet/cadence/macb_pci.c:29:0:
drivers/net/ethernet/cadence/macb.h:862:2: error: unknown type name 'phy_interface_t'
phy_interface_t phy_interface;
^~~~~~~~~~~~~~~
Add linux/phy.h to macb.h
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/cadence/macb.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index d67adad67be1..383da8cf5f6d 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -10,6 +10,8 @@
#ifndef _MACB_H
#define _MACB_H
+#include <linux/phy.h>
+
#define MACB_GREGS_NBR 16
#define MACB_GREGS_VERSION 2
#define MACB_MAX_QUEUES 8
--
2.7.4
net/core/netprio_cgroup.c:303:16: error: expected declaration specifiers or '...' before string constant
MODULE_LICENSE("GPL v2");
^~~~~~~~
Add linux/module.h to fix this.
Signed-off-by: Russell King <[email protected]>
---
net/core/netprio_cgroup.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/netprio_cgroup.c b/net/core/netprio_cgroup.c
index 2ec86fc552df..756637dc7a57 100644
--- a/net/core/netprio_cgroup.c
+++ b/net/core/netprio_cgroup.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
--
2.7.4
drivers/net/ethernet/broadcom/bgmac.c:1015:17: error: dereferencing pointer to incomplete type 'struct mii_bus'
drivers/net/ethernet/broadcom/bgmac.c:1185:2: error: implicit declaration of function 'phy_start' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1198:2: error: implicit declaration of function 'phy_stop' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1239:9: error: implicit declaration of function 'phy_mii_ioctl' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1389:28: error: 'phy_ethtool_get_link_ksettings' undeclared here (not in a function)
drivers/net/ethernet/broadcom/bgmac.c:1390:28: error: 'phy_ethtool_set_link_ksettings' undeclared here (not in a function)
drivers/net/ethernet/broadcom/bgmac.c:1403:13: error: dereferencing pointer to incomplete type 'struct phy_device'
drivers/net/ethernet/broadcom/bgmac.c:1417:3: error: implicit declaration of function 'phy_print_status' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1424:26: error: storage size of 'fphy_status' isn't known
drivers/net/ethernet/broadcom/bgmac.c:1424:9: error: variable 'fphy_status' has initializer but incomplete type
drivers/net/ethernet/broadcom/bgmac.c:1425:11: warning: excess elements in struct initializer
drivers/net/ethernet/broadcom/bgmac.c:1425:3: error: unknown field 'link' specified in initializer
drivers/net/ethernet/broadcom/bgmac.c:1426:12: note: in expansion of macro 'SPEED_1000'
drivers/net/ethernet/broadcom/bgmac.c:1426:3: error: unknown field 'speed' specified in initializer
drivers/net/ethernet/broadcom/bgmac.c:1427:13: note: in expansion of macro 'DUPLEX_FULL'
drivers/net/ethernet/broadcom/bgmac.c:1427:3: error: unknown field 'duplex' specified in initializer
drivers/net/ethernet/broadcom/bgmac.c:1432:12: error: implicit declaration of function 'fixed_phy_register' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1432:31: error: 'PHY_POLL' undeclared (first use in this function)
drivers/net/ethernet/broadcom/bgmac.c:1438:8: error: implicit declaration of function 'phy_connect_direct' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1439:6: error: 'PHY_INTERFACE_MODE_MII' undeclared (first use in this function)
drivers/net/ethernet/broadcom/bgmac.c:1521:2: error: implicit declaration of function 'phy_disconnect' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1541:15: error: expected declaration specifiers or '...' before string constant
Add linux/phy.h to bgmac.c
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/broadcom/bgmac.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 0e066dc6b8cc..58a2bd3c0458 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -12,6 +12,8 @@
#include <linux/bcma/bcma.h>
#include <linux/etherdevice.h>
#include <linux/bcm47xx_nvram.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include "bgmac.h"
static bool bgmac_wait_value(struct bgmac *bgmac, u16 reg, u32 mask,
--
2.7.4
drivers/net/usb/lan78xx.c:394:33: sparse: expected ; at end of declaration
drivers/net/usb/lan78xx.c:394:33: sparse: Expected } at end of struct-union-enum-specifier
drivers/net/usb/lan78xx.c:394:33: sparse: got interface
drivers/net/usb/lan78xx.c:403:1: sparse: Expected ; at the end of type declaration
drivers/net/usb/lan78xx.c:403:1: sparse: got }
Add linux/phy.h to lan78xx.c
Signed-off-by: Russell King <[email protected]>
---
drivers/net/usb/lan78xx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 08f8703e4d54..9889a70ff4f6 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
+#include <linux/phy.h>
#include "lan78xx.h"
#define DRIVER_AUTHOR "WOOJUNG HUH <[email protected]>"
--
2.7.4
Fix these errors reported by the 0-day builder by replacing the
linux/export.h include with linux/module.h.
In file included from include/linux/platform_device.h:14:0,
from drivers/net/wireless/ath/ath5k/ahb.c:20:
include/linux/device.h:1463:1: warning: data definition has no type or storage class
module_init(__driver##_init); \
^
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:1463:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
module_init(__driver##_init); \
^
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration
In file included from include/linux/platform_device.h:14:0,
from drivers/net/wireless/ath/ath5k/ahb.c:20:
include/linux/device.h:1468:1: warning: data definition has no type or storage class
module_exit(__driver##_exit);
^
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:1468:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
module_exit(__driver##_exit);
^
include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration
In file included from include/linux/platform_device.h:14:0,
from drivers/net/wireless/ath/ath5k/ahb.c:20:
drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_exit' defined but not used [-Wunused-function]
module_platform_driver(ath_ahb_driver);
^
include/linux/device.h:1464:20: note: in definition of macro 'module_driver'
static void __exit __driver##_exit(void) \
^~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_init' defined but not used [-Wunused-function]
module_platform_driver(ath_ahb_driver);
^
include/linux/device.h:1459:19: note: in definition of macro 'module_driver'
static int __init __driver##_init(void) \
^~~~~~~~
drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(ath_ahb_driver);
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Russell King <[email protected]>
---
drivers/net/wireless/ath/ath5k/ahb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
index 2ca88b593e4c..c0794f5988b3 100644
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -16,10 +16,10 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/module.h>
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/etherdevice.h>
-#include <linux/export.h>
#include <ath25_platform.h>
#include "ath5k.h"
#include "debug.h"
--
2.7.4
On Tue, 2017-01-31 at 19:19 +0000, Russell King wrote:
> drivers/target/iscsi/iscsi_target_login.c:1135:7: error: implicit declara=
tion of function 'try_module_get' [-Werror=3Dimplicit-function-declaration]
>=20
> Add linux/module.h to iscsi_target_login.c.
>=20
> Signed-off-by: Russell King <[email protected]>
> ---
> drivers/target/iscsi/iscsi_target_login.c | 1 +
> 1 file changed, 1 insertion(+)
>=20
> diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/i=
scsi/iscsi_target_login.c
> index 450f51deb2a2..eab274d17b5c 100644
> --- a/drivers/target/iscsi/iscsi_target_login.c
> +++ b/drivers/target/iscsi/iscsi_target_login.c
> @@ -17,6 +17,7 @@
> ***********************************************************************=
*******/
> =20
> #include <crypto/hash.h>
> +#include <linux/module.h>
> #include <linux/string.h>
> #include <linux/kthread.h>
> #include <linux/idr.h>
Reviewed-by: Bart Van Assche <[email protected]>=
Hi Russell,
On 01/31/2017 02:18 PM, Russell King wrote:
> Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc
> code:
>
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put':
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration of function 'module_put' [-Werror=implicit-function-declaration]
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_setup_rdma_bc':
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c:348:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration]
>
> Fix this by adding linux/module.h to svc_rdma_backchannel.c
>
> Signed-off-by: Russell King <[email protected]>
This patch looks okay to me:
Acked-by: Anna Schumaker <[email protected]>
> ---
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
> index 288e35c2d8f4..cb1e48e54eb1 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
> @@ -4,6 +4,7 @@
> * Support for backward direction RPCs on RPC/RDMA (server-side).
> */
>
> +#include <linux/module.h>
> #include <linux/sunrpc/svc_rdma.h>
> #include "xprt_rdma.h"
>
>
Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc
code:
net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put':
net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration of function 'module_put' [-Werror=implicit-function-declaration]
net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_setup_rdma_bc':
net/sunrpc/xprtrdma/svc_rdma_backchannel.c:348:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration]
Fix this by adding linux/module.h to svc_rdma_backchannel.c
Signed-off-by: Russell King <[email protected]>
---
net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
index 288e35c2d8f4..cb1e48e54eb1 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -4,6 +4,7 @@
* Support for backward direction RPCs on RPC/RDMA (server-side).
*/
+#include <linux/module.h>
#include <linux/sunrpc/svc_rdma.h>
#include "xprt_rdma.h"
--
2.7.4
drivers/net/ethernet/freescale/fman/fman_memac.c:519:21: error: dereferencing pointer to incomplete type 'struct fixed_phy_status'
Add linux/phy_fixed.h to fman_memac.c
Signed-off-by: Russell King <[email protected]>
---
drivers/net/ethernet/freescale/fman/fman_memac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c
index 71a5ded9d1de..cd6a53eaf161 100644
--- a/drivers/net/ethernet/freescale/fman/fman_memac.c
+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/of_mdio.h>
/* PCS registers */
--
2.7.4
Hello,
On Tue, 31 Jan 2017 19:18:59 +0000, Russell King wrote:
> drivers/net/ethernet/marvell/mvneta.c:2694:26: error: storage size of 'status' isn't known
> drivers/net/ethernet/marvell/mvneta.c:2695:26: error: storage size of 'changed' isn't known
> drivers/net/ethernet/marvell/mvneta.c:2695:9: error: variable 'changed' has initializer but incomplete type
> drivers/net/ethernet/marvell/mvneta.c:2709:2: error: implicit declaration of function 'fixed_phy_update_state' [-Werror=implicit-function-declaration]
>
> Add linux/phy_fixed.h to mvneta.c
>
> Signed-off-by: Russell King <[email protected]>
Acked-by: Thomas Petazzoni <[email protected]>
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
On 01/31/2017 08:18 PM, Russell King wrote:
> drivers/net/ethernet/broadcom/bgmac.c:1015:17: error: dereferencing pointer to incomplete type 'struct mii_bus'
> drivers/net/ethernet/broadcom/bgmac.c:1185:2: error: implicit declaration of function 'phy_start' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1198:2: error: implicit declaration of function 'phy_stop' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1239:9: error: implicit declaration of function 'phy_mii_ioctl' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1389:28: error: 'phy_ethtool_get_link_ksettings' undeclared here (not in a function)
> drivers/net/ethernet/broadcom/bgmac.c:1390:28: error: 'phy_ethtool_set_link_ksettings' undeclared here (not in a function)
> drivers/net/ethernet/broadcom/bgmac.c:1403:13: error: dereferencing pointer to incomplete type 'struct phy_device'
> drivers/net/ethernet/broadcom/bgmac.c:1417:3: error: implicit declaration of function 'phy_print_status' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1424:26: error: storage size of 'fphy_status' isn't known
> drivers/net/ethernet/broadcom/bgmac.c:1424:9: error: variable 'fphy_status' has initializer but incomplete type
> drivers/net/ethernet/broadcom/bgmac.c:1425:11: warning: excess elements in struct initializer
> drivers/net/ethernet/broadcom/bgmac.c:1425:3: error: unknown field 'link' specified in initializer
> drivers/net/ethernet/broadcom/bgmac.c:1426:12: note: in expansion of macro 'SPEED_1000'
> drivers/net/ethernet/broadcom/bgmac.c:1426:3: error: unknown field 'speed' specified in initializer
> drivers/net/ethernet/broadcom/bgmac.c:1427:13: note: in expansion of macro 'DUPLEX_FULL'
> drivers/net/ethernet/broadcom/bgmac.c:1427:3: error: unknown field 'duplex' specified in initializer
> drivers/net/ethernet/broadcom/bgmac.c:1432:12: error: implicit declaration of function 'fixed_phy_register' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1432:31: error: 'PHY_POLL' undeclared (first use in this function)
> drivers/net/ethernet/broadcom/bgmac.c:1438:8: error: implicit declaration of function 'phy_connect_direct' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1439:6: error: 'PHY_INTERFACE_MODE_MII' undeclared (first use in this function)
> drivers/net/ethernet/broadcom/bgmac.c:1521:2: error: implicit declaration of function 'phy_disconnect' [-Werror=implicit-function-declaration]
> drivers/net/ethernet/broadcom/bgmac.c:1541:15: error: expected declaration specifiers or '...' before string constant
>
> Add linux/phy.h to bgmac.c
>
> Signed-off-by: Russell King <[email protected]>
Acked-by: Rafał Miłecki <[email protected]>
Russell King <[email protected]> wrote on Tue [2017-Jan-31 19:19:19 +0000]:
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: type defaults to 'int' in declaration of 'MODULE_LICENSE'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: type defaults to 'int' in declaration of 'MODULE_VERSION'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:36: error: expected ')' before 'int'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:37: error: expected ')' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: parameter names (without types) in function declaration
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: error: type defaults to 'int' in declaration of 'module_init'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: parameter names (without types) in function declaration
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: error: type defaults to 'int' in declaration of 'module_exit'
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: parameter names (without types) in function declaration
> drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:36: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:37: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:38: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: type defaults to 'int' in declaration of 'MODULE_LICENSE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:39: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: type defaults to 'int' in declaration of 'MODULE_VERSION'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:40: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:41: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:42: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: expected declaration specifiers or '...' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:43: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: function declaration isn't a prototype
> drivers/net/ethernet/cavium/liquidio/lio_main.c:46: error: expected ')' before 'int'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:48: error: expected ')' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:53: error: expected ')' before 'int'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:54: error: expected ')' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:57: error: expected ')' before 'sizeof'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:58: error: expected ')' before string constant
> drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: data definitionhas no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:498: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: parameter names (without types) in function declaration
> drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_recv_vf_drv_notice':
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4393: error: implicit declaration of function 'try_module_get'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4400: error: implicit declaration of function 'module_put'
> drivers/net/ethernet/cavium/liquidio/lio_main.c: At top level:
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: error: type defaults to 'int' in declaration of 'module_init'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: parameter names (without types) in function declaration
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: data definition has no type or storage class
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: error: type defaults to 'int' in declaration of 'module_exit'
> drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: parameter names (without types) in function declaration
>
> Add linux/module.h to both these files.
>
> drivers/net/ethernet/cavium/liquidio/octeon_console.c:40:31: error: expected ')' before 'int'
> drivers/net/ethernet/cavium/liquidio/octeon_console.c:42:4: error: expected ')' before string constant
>
> Add linux/moduleparam.h to this file.
>
> Signed-off-by: Russell King <[email protected]>
Acked-by: Felix Manlunas <[email protected]>
Thank you.
On 01/31/2017 11:17 AM, Russell King - ARM Linux wrote:
> Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
> unnecessary dependency for quite a large amount of the kernel. There's
> very little which actually requires definitions from phy.h in net/dsa.h
> - the include itself only wants the declaration of a couple of
> structures and IFNAMSIZ.
>
> Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to
> mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h
> and phy_fixed.h from net/dsa.h.
>
> This patch reduces from around 800 files rebuilt to around 40 - even
> with ccache, the time difference is noticable.
>
> In order to make this change, several drivers need to be updated to
> include necessary headers that they were picking up through this
> include. This has resulted in a much larger patch series.
>
> I'm assuming the 0-day builder has had 24 hours with this series, and
> hasn't reported any further issues with it - the last issue was two
> weeks ago (before I became ill) which I fixed over the last weekend.
>
> I'm hoping this doesn't conflict with what's already in net-next...
For the entire series:
Acked-by: Florian Fainelli <[email protected]>
Thanks a lot for doing that.
>
> arch/mips/cavium-octeon/octeon-platform.c | 4 ----
> drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 1 +
> drivers/net/ethernet/broadcom/bgmac.c | 2 ++
> drivers/net/ethernet/cadence/macb.h | 2 ++
> drivers/net/ethernet/cavium/liquidio/lio_main.c | 1 +
> drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 1 +
> drivers/net/ethernet/cavium/liquidio/octeon_console.c | 1 +
> drivers/net/ethernet/freescale/fman/fman_memac.c | 1 +
> drivers/net/ethernet/marvell/mvneta.c | 1 +
> drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
> drivers/net/usb/lan78xx.c | 1 +
> drivers/net/wireless/ath/ath5k/ahb.c | 2 +-
> drivers/target/iscsi/iscsi_target_login.c | 1 +
> include/net/dsa.h | 6 ++++--
> net/core/netprio_cgroup.c | 1 +
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
> 16 files changed, 20 insertions(+), 7 deletions(-)
>
--
Florian
Russell King <[email protected]> writes:
> Fix these errors reported by the 0-day builder by replacing the
> linux/export.h include with linux/module.h.
>
> In file included from include/linux/platform_device.h:14:0,
> from drivers/net/wireless/ath/ath5k/ahb.c:20:
> include/linux/device.h:1463:1: warning: data definition has no type or storage class
> module_init(__driver##_init); \
> ^
> include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
> module_driver(__platform_driver, platform_driver_register, \
> ^~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
> include/linux/device.h:1463:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
> module_init(__driver##_init); \
> ^
> include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
> module_driver(__platform_driver, platform_driver_register, \
> ^~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration
> In file included from include/linux/platform_device.h:14:0,
> from drivers/net/wireless/ath/ath5k/ahb.c:20:
> include/linux/device.h:1468:1: warning: data definition has no type or storage class
> module_exit(__driver##_exit);
> ^
> include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
> module_driver(__platform_driver, platform_driver_register, \
> ^~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
> include/linux/device.h:1468:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
> module_exit(__driver##_exit);
> ^
> include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver'
> module_driver(__platform_driver, platform_driver_register, \
> ^~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration
> In file included from include/linux/platform_device.h:14:0,
> from drivers/net/wireless/ath/ath5k/ahb.c:20:
> drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_exit' defined but not used [-Wunused-function]
> module_platform_driver(ath_ahb_driver);
> ^
> include/linux/device.h:1464:20: note: in definition of macro 'module_driver'
> static void __exit __driver##_exit(void) \
> ^~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_init' defined but not used [-Wunused-function]
> module_platform_driver(ath_ahb_driver);
> ^
> include/linux/device.h:1459:19: note: in definition of macro 'module_driver'
> static int __init __driver##_init(void) \
> ^~~~~~~~
> drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver'
> module_platform_driver(ath_ahb_driver);
> ^~~~~~~~~~~~~~~~~~~~~~
>
> Signed-off-by: Russell King <[email protected]>
Looks good to me:
Acked-by: Kalle Valo <[email protected]>
I assume Dave will take this so I'll drop the patch from my queue.
--
Kalle Valo
Le 31/01/2017 à 20:18, Russell King a écrit :
> drivers/net/ethernet/cadence/macb.h:862:33: sparse: expected ; at end of declaration
> drivers/net/ethernet/cadence/macb.h:862:33: sparse: Expected } at end of struct-union-enum-specifier
> drivers/net/ethernet/cadence/macb.h:862:33: sparse: got phy_interface
> drivers/net/ethernet/cadence/macb.h:877:1: sparse: Expected ; at the end of type declaration
> drivers/net/ethernet/cadence/macb.h:877:1: sparse: got }
> In file included from drivers/net/ethernet/cadence/macb_pci.c:29:0:
> drivers/net/ethernet/cadence/macb.h:862:2: error: unknown type name 'phy_interface_t'
> phy_interface_t phy_interface;
> ^~~~~~~~~~~~~~~
>
> Add linux/phy.h to macb.h
>
> Signed-off-by: Russell King <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
> ---
> drivers/net/ethernet/cadence/macb.h | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index d67adad67be1..383da8cf5f6d 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -10,6 +10,8 @@
> #ifndef _MACB_H
> #define _MACB_H
>
> +#include <linux/phy.h>
> +
> #define MACB_GREGS_NBR 16
> #define MACB_GREGS_VERSION 2
> #define MACB_MAX_QUEUES 8
>
--
Nicolas Ferre