Hello Jes Sorensen,
I am currently testing a LM811 Wifi/BT USB dongle [1] on a Sinlinx
SinA33 Allwinner SoC board [2]. I saw that I should use the realtek
driver RTL8723BU for this USB dongle.
Currently, I am only testing the Wifi and the mainline driver (kernel
4.14-rc7) does not seem to work. At least, the scanning does not output
anything.
I tested the driver recommended by LM Technologies [3] and it works
fine (scan, connect and ping are ok). Before investigating on the
differences between these two drivers, do you have any idea about this
issue?
Here are the commands and output I got with mainline's driver:
# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 003: ID 0bda:b720
Bus 001 Device 002: ID 05e3:0608
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 0bda:8152
#
# modprobe rtl8xxxu
[ 46.785896] usb 1-1.1: This Realtek USB WiFi dongle (0x0bda:0xb720)
is untested!
[ 46.802122] usb 1-1.1: Please report results to
[email protected]
[ 46.980269] usb 1-1.1: Vendor: Realtek
[ 46.988641] usb 1-1.1: Product: 802.11n WLAN Adapter
[ 46.998182] usb 1-1.1: rtl8723bu_parse_efuse: dumping efuse (0x200
bytes):
[ 47.014106] usb 1-1.1: 00: 29 81 03 7c 01 08 21 00
[ 47.023527] usb 1-1.1: 08: 40 07 05 35 10 00 00 00
[ 47.032888] usb 1-1.1: 10: 2c 2c 2c 2c 2c 2c 2b 2b
[ 47.042197] usb 1-1.1: 18: 2b 2b 2b f4 ff ff ff ff
[ 47.051442] usb 1-1.1: 20: ff ff ff ff ff ff ff ff
[ 47.060608] usb 1-1.1: 28: ff ff ff ff ff ff ff ff
[ 47.069672] usb 1-1.1: 30: ff ff ff ff ff ff ff ff
[ 47.078679] usb 1-1.1: 38: ff ff 2d 2d 2d 2d 2d 2d
[ 47.087599] usb 1-1.1: 40: 2d 2d 2d 2d 2d 03 ff ff
[ 47.096539] usb 1-1.1: 48: ff ff ff ff ff ff ff ff
[ 47.105489] usb 1-1.1: 50: ff ff ff ff ff ff ff ff
[ 47.114418] usb 1-1.1: 58: ff ff ff ff ff ff ff ff
[ 47.123322] usb 1-1.1: 60: ff ff ff ff ff ff ff ff
[ 47.132238] usb 1-1.1: 68: ff ff ff ff ff ff ff ff
[ 47.141059] usb 1-1.1: 70: ff ff ff ff ff ff ff ff
[ 47.149810] usb 1-1.1: 78: ff ff ff ff ff ff ff ff
[ 47.158479] usb 1-1.1: 80: ff ff ff ff ff ff ff ff
[ 47.167107] usb 1-1.1: 88: ff ff ff ff ff ff ff ff
[ 47.175651] usb 1-1.1: 90: ff ff ff ff ff ff ff ff
[ 47.184102] usb 1-1.1: 98: ff ff ff ff ff ff ff ff
[ 47.192463] usb 1-1.1: a0: ff ff ff ff ff ff ff ff
[ 47.200728] usb 1-1.1: a8: ff ff ff ff ff ff ff ff
[ 47.208943] usb 1-1.1: b0: ff ff ff ff ff ff ff ff
[ 47.217053] usb 1-1.1: b8: 20 1e 20 00 00 00 ff ff
[ 47.225146] usb 1-1.1: c0: ff 28 20 11 00 00 00 ff
[ 47.233169] usb 1-1.1: c8: 00 ff ff ff ff ff ff ff
[ 47.241140] usb 1-1.1: d0: ff ff ff ff ff ff ff ff
[ 47.249009] usb 1-1.1: d8: ff ff ff ff ff ff ff ff
[ 47.256776] usb 1-1.1: e0: ff ff ff ff ff ff ff ff
[ 47.264481] usb 1-1.1: e8: ff ff ff ff ff ff ff ff
[ 47.272098] usb 1-1.1: f0: ff ff ff ff ff ff ff ff
[ 47.279619] usb 1-1.1: f8: ff ff ff ff ff ff ff ff
[ 47.287029] usb 1-1.1: 100: da 0b 20 b7 e7 47 03 5c
[ 47.294503] usb 1-1.1: 108: f3 70 32 1d c2 09 03 52
[ 47.301934] usb 1-1.1: 110: 65 61 6c 74 65 6b 16 03
[ 47.309294] usb 1-1.1: 118: 38 30 32 2e 31 31 6e 20
[ 47.316579] usb 1-1.1: 120: 57 4c 41 4e 20 41 64 61
[ 47.323811] usb 1-1.1: 128: 70 74 65 72 00 ff ff ff
[ 47.331045] usb 1-1.1: 130: ff ff ff ff ff ff ff ff
[ 47.338222] usb 1-1.1: 138: ff ff ff ff ff ff ff ff
[ 47.345335] usb 1-1.1: 140: ff ff ff ff ff ff ff 0f
[ 47.352364] usb 1-1.1: 148: ff ff ff ff ff ff ff ff
[ 47.359299] usb 1-1.1: 150: ff ff ff ff ff ff ff ff
[ 47.366135] usb 1-1.1: 158: ff ff ff ff ff ff ff ff
[ 47.372882] usb 1-1.1: 160: ff ff ff ff ff ff ff ff
[ 47.379541] usb 1-1.1: 168: ff ff ff ff ff ff ff ff
[ 47.386117] usb 1-1.1: 170: ff ff ff ff ff ff ff ff
[ 47.392664] usb 1-1.1: 178: ff ff ff ff ff ff ff ff
[ 47.399154] usb 1-1.1: 180: ff ff ff ff ff ff ff ff
[ 47.405530] usb 1-1.1: 188: ff ff ff ff ff ff ff ff
[ 47.411846] usb 1-1.1: 190: ff ff ff ff ff ff ff ff
[ 47.418125] usb 1-1.1: 198: ff ff ff ff ff ff ff ff
[ 47.424365] usb 1-1.1: 1a0: ff ff ff ff ff ff ff ff
[ 47.430587] usb 1-1.1: 1a8: ff ff ff ff ff ff ff ff
[ 47.436769] usb 1-1.1: 1b0: ff ff ff ff ff ff ff ff
[ 47.442967] usb 1-1.1: 1b8: ff ff ff ff ff ff ff ff
[ 47.449168] usb 1-1.1: 1c0: ff ff ff ff ff ff ff ff
[ 47.455323] usb 1-1.1: 1c8: ff ff ff ff ff ff ff ff
[ 47.461471] usb 1-1.1: 1d0: ff ff ff ff ff ff ff ff
[ 47.467592] usb 1-1.1: 1d8: ff ff ff ff ff ff ff ff
[ 47.473713] usb 1-1.1: 1e0: ff ff ff ff ff ff ff ff
[ 47.479841] usb 1-1.1: 1e8: ff ff ff ff ff ff ff ff
[ 47.485942] usb 1-1.1: 1f0: ff ff ff ff ff ff ff ff
[ 47.492062] usb 1-1.1: 1f8: ff ff ff ff ff ff ff ff
[ 47.498173] usb 1-1.1: RTL8723BU rev E (SMIC) 1T1R, TX queues 3,
WiFi=1, BT=1, GPS=0, HI PA=0
[ 47.509357] usb 1-1.1: RTL8723BU MAC:5c:f3:70:32:1d:c2
[ 47.516057] usb 1-1.1: rtl8xxxu: Loading firmware
rtlwifi/rtl8723bu_nic.bin
[ 47.532111] usb 1-1.1: Firmware revision 35.0 (signature 0x5301)
[ 48.531644] usbcore: registered new interface driver rtl8xxxu
#
#
# ifconfig wlan0 up
[ 53.922338] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
#
# iw wlan0 scan
#
# iw wlan0 info
Interface wlan0
ifindex 4
wdev 0x1
addr 5c:f3:70:32:1d:c2
type managed
wiphy 0
txpower 20.00 dBm
If you need more tests/information, do not hesitate to ask me.
Thank you in advance for any help/hints!
[1]:
https://www.lm-technologies.com/product/wifi-and-bluetooth-usb-module-4-0-dual-mode-class-1-lm811/
[2]: http://www.sinlinx.com/sina33.html
[3]: https://wiki.lm-technologies.com/lm811-linux-driver-installation/
Best regards,
--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
On 11/22/2017 04:51 AM, Mylene JOSSERAND wrote:
> Hello Jes Sorensen,
>
> I am currently testing a LM811 Wifi/BT USB dongle [1] on a Sinlinx
> SinA33 Allwinner SoC board [2]. I saw that I should use the realtek
> driver RTL8723BU for this USB dongle.
>
> Currently, I am only testing the Wifi and the mainline driver (kernel
> 4.14-rc7) does not seem to work. At least, the scanning does not output
> anything.
>
> I tested the driver recommended by LM Technologies [3] and it works
> fine (scan, connect and ping are ok). Before investigating on the
> differences between these two drivers, do you have any idea about this
> issue?
>
> Here are the commands and output I got with mainline's driver:
I have not looked at the driver these LM Technologies people are
referring to, but I am guessing it's the vendor code.
8723bu is a little dicey because it has BT in the chip and if you enable
that the two drivers need to interact, which rtl8xxxu currently doesn't
know about. Check your dmesg output to make sure you don't have some BT
thing loaded hijacking the chip.
Jes
Hello,
Le Tue, 28 Nov 2017 11:14:10 -0500,
Jes Sorensen <[email protected]> a écrit :
> On 11/22/2017 04:51 AM, Mylene JOSSERAND wrote:
> > Hello Jes Sorensen,
> >
> > I am currently testing a LM811 Wifi/BT USB dongle [1] on a Sinlinx
> > SinA33 Allwinner SoC board [2]. I saw that I should use the realtek
> > driver RTL8723BU for this USB dongle.
> >
> > Currently, I am only testing the Wifi and the mainline driver
> > (kernel 4.14-rc7) does not seem to work. At least, the scanning
> > does not output anything.
> >
> > I tested the driver recommended by LM Technologies [3] and it works
> > fine (scan, connect and ping are ok). Before investigating on the
> > differences between these two drivers, do you have any idea about
> > this issue?
> >
> > Here are the commands and output I got with mainline's driver:
>
> I have not looked at the driver these LM Technologies people are
> referring to, but I am guessing it's the vendor code.
Yes, it is.
>
> 8723bu is a little dicey because it has BT in the chip and if you
> enable that the two drivers need to interact, which rtl8xxxu
> currently doesn't know about. Check your dmesg output to make sure
> you don't have some BT thing loaded hijacking the chip.
Okay, I was also testing the BT so maybe, it was the case. I will
have a try without any BT drivers.
Anyway, thank you for your help!
Best regards,
--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Hello Jes,
Le Tue, 28 Nov 2017 11:14:10 -0500,
Jes Sorensen <[email protected]> a écrit :
> On 11/22/2017 04:51 AM, Mylene JOSSERAND wrote:
> > Hello Jes Sorensen,
> >
> > I am currently testing a LM811 Wifi/BT USB dongle [1] on a Sinlinx
> > SinA33 Allwinner SoC board [2]. I saw that I should use the realtek
> > driver RTL8723BU for this USB dongle.
> >
> > Currently, I am only testing the Wifi and the mainline driver (kernel
> > 4.14-rc7) does not seem to work. At least, the scanning does not output
> > anything.
> >
> > I tested the driver recommended by LM Technologies [3] and it works
> > fine (scan, connect and ping are ok). Before investigating on the
> > differences between these two drivers, do you have any idea about this
> > issue?
> >
> > Here are the commands and output I got with mainline's driver:
>
> I have not looked at the driver these LM Technologies people are
> referring to, but I am guessing it's the vendor code.
>
> 8723bu is a little dicey because it has BT in the chip and if you enable
> that the two drivers need to interact, which rtl8xxxu currently doesn't
> know about. Check your dmesg output to make sure you don't have some BT
> thing loaded hijacking the chip.
I finally tested it again without any BT stuff enabled and I am still
not having any output on scanning.
I added DEBUG support to have all dev_dbg outputs for rtl8xxxu (core
and 8723b). Here is the log of boot and different iw commands:
http://code.bulix.org/56345t-242970?raw
Do you have any idea/hint to give me?
I checked the firmware: I am using the last one from linux-firmware's
repository. Have you already tried this chip? With which firmware?
Thank you very much for any help.
Best regards,
--
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com