Move skb dma mapping before configuring txwi since new chipsets
(e.g. mt7615) will need dma addresses to properly configure txwi.
Introduce temporary tx_aligned4_skbs variable in order to tell mt76 layer
if it is necessary to align the 802.11 header (it will be removed as soon
as mac80211 will take care of it)
Lorenzo Bianconi (4):
mt76: move mt76x02_insert_hdr_pad in mt76-core module
mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb
mt76: move skb dma mapping before running tx_prepare_skb
mt76: introduce mt76_tx_info data structure
drivers/net/wireless/mediatek/mt76/dma.c | 55 +++++++++----------
drivers/net/wireless/mediatek/mt76/mt76.h | 25 ++++++++-
.../net/wireless/mediatek/mt76/mt7603/mac.c | 2 +-
.../wireless/mediatek/mt76/mt7603/mt7603.h | 2 +-
.../net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x02.h | 3 +-
.../net/wireless/mediatek/mt76/mt76x02_txrx.c | 21 +++----
.../net/wireless/mediatek/mt76/mt76x02_usb.h | 2 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 4 +-
.../net/wireless/mediatek/mt76/mt76x02_util.c | 16 ------
.../net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
11 files changed, 68 insertions(+), 64 deletions(-)
--
2.20.1
Move mt76x02_insert_hdr_pad in m76-core and rename it in
mt76_insert_hdr_pad in order to be used in mt76_dma_tx_queue_skb.
This is a preliminary patch in order to properly support tx dma
mapping for new chipsets (e.g. mt7615)
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 15 +++++++++++++++
drivers/net/wireless/mediatek/mt76/mt76x02.h | 1 -
.../net/wireless/mediatek/mt76/mt76x02_txrx.c | 2 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
.../net/wireless/mediatek/mt76/mt76x02_util.c | 16 ----------------
5 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 57136073e1fa..971d968c1b5f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -653,6 +653,21 @@ static inline struct mt76_tx_cb *mt76_tx_skb_cb(struct sk_buff *skb)
return ((void *) IEEE80211_SKB_CB(skb)->status.status_driver_data);
}
+static inline int mt76_insert_hdr_pad(struct sk_buff *skb)
+{
+ int len = ieee80211_get_hdrlen_from_skb(skb);
+
+ if (len % 4 == 0)
+ return 0;
+
+ skb_push(skb, 2);
+ memmove(skb->data, skb->data + 2, len);
+
+ skb->data[len] = 0;
+ skb->data[len + 1] = 0;
+ return 2;
+}
+
void mt76_rx(struct mt76_dev *dev, enum mt76_rxq_id q, struct sk_buff *skb);
void mt76_tx(struct mt76_dev *dev, struct ieee80211_sta *sta,
struct mt76_wcid *wcid, struct sk_buff *skb);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02.h b/drivers/net/wireless/mediatek/mt76/mt76x02.h
index 392b96fcb520..53ec8103a268 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h
@@ -163,7 +163,6 @@ void mt76x02_set_tx_ackto(struct mt76x02_dev *dev);
void mt76x02_set_coverage_class(struct ieee80211_hw *hw,
s16 coverage_class);
int mt76x02_set_rts_threshold(struct ieee80211_hw *hw, u32 val);
-int mt76x02_insert_hdr_pad(struct sk_buff *skb);
void mt76x02_remove_hdr_pad(struct sk_buff *skb, int len);
bool mt76x02_tx_status_data(struct mt76_dev *mdev, u8 *update);
void mt76x02_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
index ce9ace11339d..f574866c7e9d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
@@ -165,7 +165,7 @@ int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
pid = mt76_tx_status_skb_add(mdev, wcid, skb);
txwi->pktid = pid;
- ret = mt76x02_insert_hdr_pad(skb);
+ ret = mt76_insert_hdr_pad(skb);
if (ret < 0)
return ret;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
index 8ab63255ba6f..6c3fc4cea283 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
@@ -82,7 +82,7 @@ int mt76x02u_tx_prepare_skb(struct mt76_dev *mdev, void *data,
enum mt76_qsel qsel;
u32 flags;
- mt76x02_insert_hdr_pad(skb);
+ mt76_insert_hdr_pad(skb);
txwi = (struct mt76x02_txwi *)(skb->data - sizeof(struct mt76x02_txwi));
mt76x02_mac_write_txwi(dev, txwi, skb, wcid, sta, len);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index b14a55737829..81d65319d3ea 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -566,22 +566,6 @@ void mt76x02_sta_rate_tbl_update(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL_GPL(mt76x02_sta_rate_tbl_update);
-int mt76x02_insert_hdr_pad(struct sk_buff *skb)
-{
- int len = ieee80211_get_hdrlen_from_skb(skb);
-
- if (len % 4 == 0)
- return 0;
-
- skb_push(skb, 2);
- memmove(skb->data, skb->data + 2, len);
-
- skb->data[len] = 0;
- skb->data[len + 1] = 0;
- return 2;
-}
-EXPORT_SYMBOL_GPL(mt76x02_insert_hdr_pad);
-
void mt76x02_remove_hdr_pad(struct sk_buff *skb, int len)
{
int hdrlen;
--
2.20.1
Introduce tx_aligned4_skbs in mt76_driver_ops and move
mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
patch in order to unify tx dma mapping for mt76x02 and new chipsets
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/mediatek/mt76/dma.c | 3 +++
drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 13 +++++--------
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
5 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index a66832a02281..14dd6585bab4 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -300,6 +300,9 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
}
skb->prev = skb->next = NULL;
+ if (dev->drv->tx_aligned4_skbs)
+ mt76_insert_hdr_pad(skb);
+
dma_sync_single_for_cpu(dev->dev, t->dma_addr, sizeof(t->txwi),
DMA_TO_DEVICE);
ret = dev->drv->tx_prepare_skb(dev, &t->txwi, skb, qid, wcid, sta,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 971d968c1b5f..dc505d55409c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -288,6 +288,7 @@ struct mt76_hw_cap {
};
struct mt76_driver_ops {
+ bool tx_aligned4_skbs;
u16 txwi_size;
void (*update_survey)(struct mt76_dev *dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
index f302162036d0..e07a62246db7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
@@ -164,6 +164,7 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct mt76_driver_ops drv_ops = {
.txwi_size = sizeof(struct mt76x02_txwi),
+ .tx_aligned4_skbs = true,
.update_survey = mt76x02_update_channel,
.tx_prepare_skb = mt76x02_tx_prepare_skb,
.tx_complete_skb = mt76x02_tx_complete_skb,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
index f574866c7e9d..708f2c65d3fd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
@@ -152,23 +152,20 @@ int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
u32 *tx_info)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct mt76x02_txwi *txwi = txwi_ptr;
- int qsel = MT_QSEL_EDCA;
- int pid;
- int ret;
+ int hdrlen, len, pid, qsel = MT_QSEL_EDCA;
if (qid == MT_TXQ_PSD && wcid && wcid->idx < 128)
mt76x02_mac_wcid_set_drop(dev, wcid->idx, false);
- mt76x02_mac_write_txwi(dev, txwi, skb, wcid, sta, skb->len);
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ len = skb->len - (hdrlen & 2);
+ mt76x02_mac_write_txwi(dev, txwi, skb, wcid, sta, len);
pid = mt76_tx_status_skb_add(mdev, wcid, skb);
txwi->pktid = pid;
- ret = mt76_insert_hdr_pad(skb);
- if (ret < 0)
- return ret;
-
if (pid >= MT_PACKET_ID_FIRST)
qsel = MT_QSEL_MGMT;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
index 6274655e1f7e..4747f782417a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci.c
@@ -32,6 +32,7 @@ mt76pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct mt76_driver_ops drv_ops = {
.txwi_size = sizeof(struct mt76x02_txwi),
+ .tx_aligned4_skbs = true,
.update_survey = mt76x02_update_channel,
.tx_prepare_skb = mt76x02_tx_prepare_skb,
.tx_complete_skb = mt76x02_tx_complete_skb,
--
2.20.1
Move skb dma mapping before configuring txwi since new chipsets (mt7615)
will need skb dma addresses in order to properly configure txwi
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/mediatek/mt76/dma.c | 29 ++++++++++--------------
1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 14dd6585bab4..a29b2aa95a51 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -287,11 +287,10 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
struct mt76_queue_entry e;
struct mt76_txwi_cache *t;
struct mt76_queue_buf buf[32];
+ int len, n = 0, ret = -ENOMEM;
struct sk_buff *iter;
dma_addr_t addr;
- int len;
u32 tx_info = 0;
- int n, ret;
t = mt76_get_txwi(dev);
if (!t) {
@@ -303,23 +302,11 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
if (dev->drv->tx_aligned4_skbs)
mt76_insert_hdr_pad(skb);
- dma_sync_single_for_cpu(dev->dev, t->dma_addr, sizeof(t->txwi),
- DMA_TO_DEVICE);
- ret = dev->drv->tx_prepare_skb(dev, &t->txwi, skb, qid, wcid, sta,
- &tx_info);
- dma_sync_single_for_device(dev->dev, t->dma_addr, sizeof(t->txwi),
- DMA_TO_DEVICE);
- if (ret < 0)
- goto free;
-
- len = skb->len - skb->data_len;
+ len = skb_headlen(skb);
addr = dma_map_single(dev->dev, skb->data, len, DMA_TO_DEVICE);
- if (dma_mapping_error(dev->dev, addr)) {
- ret = -ENOMEM;
+ if (dma_mapping_error(dev->dev, addr))
goto free;
- }
- n = 0;
buf[n].addr = t->dma_addr;
buf[n++].len = dev->drv->txwi_size;
buf[n].addr = addr;
@@ -341,10 +328,18 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
if (q->queued + (n + 1) / 2 >= q->ndesc - 1)
goto unmap;
+ dma_sync_single_for_cpu(dev->dev, t->dma_addr, sizeof(t->txwi),
+ DMA_TO_DEVICE);
+ ret = dev->drv->tx_prepare_skb(dev, &t->txwi, skb, qid, wcid, sta,
+ &tx_info);
+ dma_sync_single_for_device(dev->dev, t->dma_addr, sizeof(t->txwi),
+ DMA_TO_DEVICE);
+ if (ret < 0)
+ goto unmap;
+
return mt76_dma_add_buf(dev, q, buf, n, tx_info, skb, t);
unmap:
- ret = -ENOMEM;
for (n--; n > 0; n--)
dma_unmap_single(dev->dev, buf[n].addr, buf[n].len,
DMA_TO_DEVICE);
--
2.20.1
Add mt76_tx_info as auxiliary data structure to pass values
to tx_prepare_skb pointer. This is a preliminary patch to add
support for new chipsets (e.g. mt7615)
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/mediatek/mt76/dma.c | 27 ++++++++++---------
drivers/net/wireless/mediatek/mt76/mt76.h | 9 ++++++-
.../net/wireless/mediatek/mt76/mt7603/mac.c | 2 +-
.../wireless/mediatek/mt76/mt7603/mt7603.h | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x02.h | 2 +-
.../net/wireless/mediatek/mt76/mt76x02_txrx.c | 8 +++---
.../net/wireless/mediatek/mt76/mt76x02_usb.h | 2 +-
.../wireless/mediatek/mt76/mt76x02_usb_core.c | 2 +-
8 files changed, 31 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index a29b2aa95a51..e1ff31205b11 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -284,13 +284,12 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
struct ieee80211_sta *sta)
{
struct mt76_queue *q = dev->q_tx[qid].q;
+ struct mt76_tx_info tx_info = {};
+ int len, n = 0, ret = -ENOMEM;
struct mt76_queue_entry e;
struct mt76_txwi_cache *t;
- struct mt76_queue_buf buf[32];
- int len, n = 0, ret = -ENOMEM;
struct sk_buff *iter;
dma_addr_t addr;
- u32 tx_info = 0;
t = mt76_get_txwi(dev);
if (!t) {
@@ -307,13 +306,13 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
if (dma_mapping_error(dev->dev, addr))
goto free;
- buf[n].addr = t->dma_addr;
- buf[n++].len = dev->drv->txwi_size;
- buf[n].addr = addr;
- buf[n++].len = len;
+ tx_info.buf[n].addr = t->dma_addr;
+ tx_info.buf[n++].len = dev->drv->txwi_size;
+ tx_info.buf[n].addr = addr;
+ tx_info.buf[n++].len = len;
skb_walk_frags(skb, iter) {
- if (n == ARRAY_SIZE(buf))
+ if (n == ARRAY_SIZE(tx_info.buf))
goto unmap;
addr = dma_map_single(dev->dev, iter->data, iter->len,
@@ -321,9 +320,10 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
if (dma_mapping_error(dev->dev, addr))
goto unmap;
- buf[n].addr = addr;
- buf[n++].len = iter->len;
+ tx_info.buf[n].addr = addr;
+ tx_info.buf[n++].len = iter->len;
}
+ tx_info.nbuf = n;
if (q->queued + (n + 1) / 2 >= q->ndesc - 1)
goto unmap;
@@ -337,12 +337,13 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
if (ret < 0)
goto unmap;
- return mt76_dma_add_buf(dev, q, buf, n, tx_info, skb, t);
+ return mt76_dma_add_buf(dev, q, tx_info.buf, tx_info.nbuf,
+ tx_info.info, skb, t);
unmap:
for (n--; n > 0; n--)
- dma_unmap_single(dev->dev, buf[n].addr, buf[n].len,
- DMA_TO_DEVICE);
+ dma_unmap_single(dev->dev, tx_info.buf[n].addr,
+ tx_info.buf[n].len, DMA_TO_DEVICE);
free:
e.skb = skb;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index dc505d55409c..9573a283e29f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -83,6 +83,12 @@ struct mt76_queue_buf {
int len;
};
+struct mt76_tx_info {
+ struct mt76_queue_buf buf[32];
+ int nbuf;
+ u32 info;
+};
+
struct mt76u_buf {
struct mt76_dev *dev;
struct urb *urb;
@@ -296,7 +302,8 @@ struct mt76_driver_ops {
int (*tx_prepare_skb)(struct mt76_dev *dev, void *txwi_ptr,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid,
- struct ieee80211_sta *sta, u32 *tx_info);
+ struct ieee80211_sta *sta,
+ struct mt76_tx_info *tx_info);
void (*tx_complete_skb)(struct mt76_dev *dev, enum mt76_txq_id qid,
struct mt76_queue_entry *e);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 1ff4c10b291c..5f800467c628 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -939,7 +939,7 @@ mt7603_mac_write_txwi(struct mt7603_dev *dev, __le32 *txwi,
int mt7603_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info)
+ struct mt76_tx_info *tx_info)
{
struct mt7603_dev *dev = container_of(mdev, struct mt7603_dev, mt76);
struct mt7603_sta *msta = container_of(wcid, struct mt7603_sta, wcid);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h b/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
index 8bd00b97066a..f414ff2a5279 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
@@ -225,7 +225,7 @@ void mt7603_filter_tx(struct mt7603_dev *dev, int idx, bool abort);
int mt7603_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info);
+ struct mt76_tx_info *tx_info);
void mt7603_tx_complete_skb(struct mt76_dev *mdev, enum mt76_txq_id qid,
struct mt76_queue_entry *e);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02.h b/drivers/net/wireless/mediatek/mt76/mt76x02.h
index 53ec8103a268..cb5792b41d2d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02.h
@@ -174,7 +174,7 @@ void mt76x02_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info);
+ struct mt76_tx_info *tx_info);
void mt76x02_sw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const u8 *mac);
void mt76x02_sw_scan_complete(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
index 708f2c65d3fd..dd7d04b9b8db 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c
@@ -149,7 +149,7 @@ EXPORT_SYMBOL_GPL(mt76x02_tx_status_data);
int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info)
+ struct mt76_tx_info *tx_info)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
@@ -169,11 +169,11 @@ int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
if (pid >= MT_PACKET_ID_FIRST)
qsel = MT_QSEL_MGMT;
- *tx_info = FIELD_PREP(MT_TXD_INFO_QSEL, qsel) |
- MT_TXD_INFO_80211;
+ tx_info->info = FIELD_PREP(MT_TXD_INFO_QSEL, qsel) |
+ MT_TXD_INFO_80211;
if (!wcid || wcid->hw_key_idx == 0xff || wcid->sw_iv)
- *tx_info |= MT_TXD_INFO_WIV;
+ tx_info->info |= MT_TXD_INFO_WIV;
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb.h b/drivers/net/wireless/mediatek/mt76/mt76x02_usb.h
index 98e647c8c7c7..8f98cc6ce094 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb.h
@@ -28,7 +28,7 @@ int mt76x02u_skb_dma_info(struct sk_buff *skb, int port, u32 flags);
int mt76x02u_tx_prepare_skb(struct mt76_dev *mdev, void *data,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info);
+ struct mt76_tx_info *tx_info);
void mt76x02u_tx_complete_skb(struct mt76_dev *mdev, enum mt76_txq_id qid,
struct mt76_queue_entry *e);
#endif /* __MT76x02_USB_H */
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
index 6c3fc4cea283..394dfe5b4a2e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
@@ -74,7 +74,7 @@ int mt76x02u_skb_dma_info(struct sk_buff *skb, int port, u32 flags)
int mt76x02u_tx_prepare_skb(struct mt76_dev *mdev, void *data,
struct sk_buff *skb, enum mt76_txq_id qid,
struct mt76_wcid *wcid, struct ieee80211_sta *sta,
- u32 *tx_info)
+ struct mt76_tx_info *tx_info)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
int pid, len = skb->len, ep = q2ep(mdev->q_tx[qid].q->hw_idx);
--
2.20.1
> Move skb dma mapping before configuring txwi since new chipsets
> (e.g. mt7615) will need dma addresses to properly configure txwi.
> Introduce temporary tx_aligned4_skbs variable in order to tell mt76 layer
> if it is necessary to align the 802.11 header (it will be removed as soon
> as mac80211 will take care of it)
>
> Lorenzo Bianconi (4):
> mt76: move mt76x02_insert_hdr_pad in mt76-core module
> mt76: mmio: move mt76_insert_hdr_pad in mt76_dma_tx_queue_skb
> mt76: move skb dma mapping before running tx_prepare_skb
> mt76: introduce mt76_tx_info data structure
>
> drivers/net/wireless/mediatek/mt76/dma.c | 55 +++++++++----------
> drivers/net/wireless/mediatek/mt76/mt76.h | 25 ++++++++-
> .../net/wireless/mediatek/mt76/mt7603/mac.c | 2 +-
> .../wireless/mediatek/mt76/mt7603/mt7603.h | 2 +-
> .../net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt76x02.h | 3 +-
> .../net/wireless/mediatek/mt76/mt76x02_txrx.c | 21 +++----
> .../net/wireless/mediatek/mt76/mt76x02_usb.h | 2 +-
> .../wireless/mediatek/mt76/mt76x02_usb_core.c | 4 +-
> .../net/wireless/mediatek/mt76/mt76x02_util.c | 16 ------
> .../net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
> 11 files changed, 68 insertions(+), 64 deletions(-)
I forgot to mention this series is based on:
'introduce mt76_sw_queue data structure'
https://patchwork.kernel.org/cover/10836583/
Regards,
Lorenzo
>
> --
> 2.20.1
>
On Mon, Mar 11, 2019 at 01:35:23PM +0100, Lorenzo Bianconi wrote:
> +static inline int mt76_insert_hdr_pad(struct sk_buff *skb)
> +{
> + int len = ieee80211_get_hdrlen_from_skb(skb);
> +
> + if (len % 4 == 0)
> + return 0;
> +
> + skb_push(skb, 2);
> + memmove(skb->data, skb->data + 2, len);
> +
> + skb->data[len] = 0;
> + skb->data[len + 1] = 0;
> + return 2;
> +}
<snip>
> @@ -165,7 +165,7 @@ int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
> pid = mt76_tx_status_skb_add(mdev, wcid, skb);
> txwi->pktid = pid;
>
> - ret = mt76x02_insert_hdr_pad(skb);
> + ret = mt76_insert_hdr_pad(skb);
> if (ret < 0)
> return ret;
Since you modify this you can make mt76_inser_hdr_pad() return
void since we do not return error any longer.
Stanislaw
On Mon, Mar 11, 2019 at 01:35:24PM +0100, Lorenzo Bianconi wrote:
> Introduce tx_aligned4_skbs in mt76_driver_ops and move
> mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
> patch in order to unify tx dma mapping for mt76x02 and new chipsets
>
> Signed-off-by: Felix Fietkau <[email protected]>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/dma.c | 3 +++
> drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 13 +++++--------
> drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
> 5 files changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
> index a66832a02281..14dd6585bab4 100644
> --- a/drivers/net/wireless/mediatek/mt76/dma.c
> +++ b/drivers/net/wireless/mediatek/mt76/dma.c
> @@ -300,6 +300,9 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
> }
>
> skb->prev = skb->next = NULL;
> + if (dev->drv->tx_aligned4_skbs)
> + mt76_insert_hdr_pad(skb);
We need 4 bytes aligned skbs for mt76x02 or we just need header
lenght be multiple of 4 ?
Stanislaw
> On Mon, Mar 11, 2019 at 01:35:23PM +0100, Lorenzo Bianconi wrote:
> > +static inline int mt76_insert_hdr_pad(struct sk_buff *skb)
> > +{
> > + int len = ieee80211_get_hdrlen_from_skb(skb);
> > +
> > + if (len % 4 == 0)
> > + return 0;
> > +
> > + skb_push(skb, 2);
> > + memmove(skb->data, skb->data + 2, len);
> > +
> > + skb->data[len] = 0;
> > + skb->data[len + 1] = 0;
> > + return 2;
> > +}
> <snip>
> > @@ -165,7 +165,7 @@ int mt76x02_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
> > pid = mt76_tx_status_skb_add(mdev, wcid, skb);
> > txwi->pktid = pid;
> >
> > - ret = mt76x02_insert_hdr_pad(skb);
> > + ret = mt76_insert_hdr_pad(skb);
> > if (ret < 0)
> > return ret;
>
> Since you modify this you can make mt76_inser_hdr_pad() return
> void since we do not return error any longer.
ack, will do in v2
Regards,
Lorenzo
>
> Stanislaw
On Mar 11, Stanislaw Gruszka wrote:
> On Mon, Mar 11, 2019 at 01:35:24PM +0100, Lorenzo Bianconi wrote:
> > Introduce tx_aligned4_skbs in mt76_driver_ops and move
> > mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
> > patch in order to unify tx dma mapping for mt76x02 and new chipsets
> >
> > Signed-off-by: Felix Fietkau <[email protected]>
> > Signed-off-by: Lorenzo Bianconi <[email protected]>
> > ---
> > drivers/net/wireless/mediatek/mt76/dma.c | 3 +++
> > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
> > drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 13 +++++--------
> > drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
> > 5 files changed, 11 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
> > index a66832a02281..14dd6585bab4 100644
> > --- a/drivers/net/wireless/mediatek/mt76/dma.c
> > +++ b/drivers/net/wireless/mediatek/mt76/dma.c
> > @@ -300,6 +300,9 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
> > }
> >
> > skb->prev = skb->next = NULL;
> > + if (dev->drv->tx_aligned4_skbs)
> > + mt76_insert_hdr_pad(skb);
>
> We need 4 bytes aligned skbs for mt76x02 or we just need header
> lenght be multiple of 4 ?
I think IV/LLC should be 4 byte aligned
Regards,
Lorenzo
>
> Stanislaw
>
On Mon, Mar 11, 2019 at 03:25:18PM +0100, Lorenzo Bianconi wrote:
> On Mar 11, Stanislaw Gruszka wrote:
> > On Mon, Mar 11, 2019 at 01:35:24PM +0100, Lorenzo Bianconi wrote:
> > > Introduce tx_aligned4_skbs in mt76_driver_ops and move
> > > mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
> > > patch in order to unify tx dma mapping for mt76x02 and new chipsets
> > >
> > > Signed-off-by: Felix Fietkau <[email protected]>
> > > Signed-off-by: Lorenzo Bianconi <[email protected]>
> > > ---
> > > drivers/net/wireless/mediatek/mt76/dma.c | 3 +++
> > > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > > drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
> > > drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 13 +++++--------
> > > drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
> > > 5 files changed, 11 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
> > > index a66832a02281..14dd6585bab4 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/dma.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/dma.c
> > > @@ -300,6 +300,9 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
> > > }
> > >
> > > skb->prev = skb->next = NULL;
> > > + if (dev->drv->tx_aligned4_skbs)
> > > + mt76_insert_hdr_pad(skb);
> >
> > We need 4 bytes aligned skbs for mt76x02 or we just need header
> > lenght be multiple of 4 ?
>
> I think IV/LLC should be 4 byte aligned
mt76_insert_hdr_pad() does not change alignment of IV/LLC , it only
moves header.
I'm not sure what is actually needed (4 bytes alignment or 4 bytes
lenght), but I just saw Felix sent 2 mac80211 patches that hopfully
do the right thing, so this code after appling mac80211 changes
and set TX_NEEDS_ALIGNED4_SKBS can be removed.
Stanislaw
> On Mon, Mar 11, 2019 at 03:25:18PM +0100, Lorenzo Bianconi wrote:
> > On Mar 11, Stanislaw Gruszka wrote:
> > > On Mon, Mar 11, 2019 at 01:35:24PM +0100, Lorenzo Bianconi wrote:
> > > > Introduce tx_aligned4_skbs in mt76_driver_ops and move
> > > > mt76_insert_hdr_pad in mt76_dma_tx_queue_skb. This is a preliminary
> > > > patch in order to unify tx dma mapping for mt76x02 and new chipsets
> > > >
> > > > Signed-off-by: Felix Fietkau <[email protected]>
> > > > Signed-off-by: Lorenzo Bianconi <[email protected]>
> > > > ---
> > > > drivers/net/wireless/mediatek/mt76/dma.c | 3 +++
> > > > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 13 +++++--------
> > > > drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 1 +
> > > > 5 files changed, 11 insertions(+), 8 deletions(-)
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
> > > > index a66832a02281..14dd6585bab4 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/dma.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/dma.c
> > > > @@ -300,6 +300,9 @@ mt76_dma_tx_queue_skb(struct mt76_dev *dev, enum mt76_txq_id qid,
> > > > }
> > > >
> > > > skb->prev = skb->next = NULL;
> > > > + if (dev->drv->tx_aligned4_skbs)
> > > > + mt76_insert_hdr_pad(skb);
> > >
> > > We need 4 bytes aligned skbs for mt76x02 or we just need header
> > > lenght be multiple of 4 ?
> >
> > I think IV/LLC should be 4 byte aligned
>
> mt76_insert_hdr_pad() does not change alignment of IV/LLC , it only
> moves header.
>
> I'm not sure what is actually needed (4 bytes alignment or 4 bytes
> lenght), but I just saw Felix sent 2 mac80211 patches that hopfully
> do the right thing, so this code after appling mac80211 changes
> and set TX_NEEDS_ALIGNED4_SKBS can be removed.
this is the plan :)
Regards,
Lorenzo
>
> Stanislaw
>