2022-03-28 07:13:57

by Richard Huynh

Subject: [PATCH] wireless-regdb: Update regulatory rules for Australia (AU)

Changes allowing lower portion of WiFi 6E spectrum. (5925-6425)

Amendment: https://www.legislation.gov.au/Details/F2022L00249
Full text: https://www.legislation.gov.au/Details/F2022C00281

Allows for both 250mW EIRP indoors or 25mW outdoors.
However, only the former limit is defined in this commit.

Signed-off-by: Richard Huynh <[email protected]>
---
db.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/db.txt b/db.txt
index e887c73..15de29f 100644
--- a/db.txt
+++ b/db.txt
@@ -121,7 +121,7 @@ country AT: DFS-ETSI
(57000 - 66000 @ 2160), (40)

# Source:
-# https://www.legislation.gov.au/Details/F2016C00432
+# https://www.legislation.gov.au/Details/F2022C00281
# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B.
# The EIRP for DFS bands can be increased by 3dB if TPC is implemented.
# In order to allow 80MHz operation between 5650-5730MHz the upper boundary
@@ -133,6 +133,7 @@ country AU: DFS-ETSI
(5470 - 5600 @ 80), (27), DFS
(5650 - 5730 @ 80), (27), DFS
(5730 - 5850 @ 80), (36)
+ (5925 - 6425 @ 160), (24), NO-OUTDOOR, AUTO-BW
(57000 - 66000 @ 2160), (43), NO-OUTDOOR

country AW: DFS-ETSI
--
2.35.1

2022-04-04 21:39:22

by Seth Forshee

Subject: Re: [PATCH] wireless-regdb: Update regulatory rules for Australia (AU)

On Mon, Mar 28, 2022 at 05:22:51PM +1100, Richard Huynh wrote:
> Changes allowing lower portion of WiFi 6E spectrum. (5925-6425)
>
> Amendment: https://www.legislation.gov.au/Details/F2022L00249
> Full text: https://www.legislation.gov.au/Details/F2022C00281
>
> Allows for both 250mW EIRP indoors or 25mW outdoors.
> However, only the former limit is defined in this commit.
>
> Signed-off-by: Richard Huynh <[email protected]>
> ---
> db.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/db.txt b/db.txt
> index e887c73..15de29f 100644
> --- a/db.txt
> +++ b/db.txt
> @@ -121,7 +121,7 @@ country AT: DFS-ETSI
> (57000 - 66000 @ 2160), (40)
>
> # Source:
> -# https://www.legislation.gov.au/Details/F2016C00432
> +# https://www.legislation.gov.au/Details/F2022C00281
> # Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B.
> # The EIRP for DFS bands can be increased by 3dB if TPC is implemented.
> # In order to allow 80MHz operation between 5650-5730MHz the upper boundary
> @@ -133,6 +133,7 @@ country AU: DFS-ETSI
> (5470 - 5600 @ 80), (27), DFS
> (5650 - 5730 @ 80), (27), DFS
> (5730 - 5850 @ 80), (36)
> + (5925 - 6425 @ 160), (24), NO-OUTDOOR, AUTO-BW
> (57000 - 66000 @ 2160), (43), NO-OUTDOOR

Thanks for the patch. One small issue though. AUTO-BW doesn't really
make sense here since the range isn't adjacent to any other ranges.
Otherwise it looks fine.

Thanks,
Seth