2022-09-29 15:16:38

by Ben Greear

[permalink] [raw]
Subject: [PATCH 1/2] wifi: mt76: mt7915: fix bounds checking for tx-free-done command

From: Ben Greear <[email protected]>

According to the tx-free-done documentation, the DW4 can be repeated,
so have to be more careful about how we test for walking off the
end of the array.

Signed-off-by: Ben Greear <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 4e70f5d050ea..bbaa77af387c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1116,14 +1116,16 @@ mt7915_mac_tx_free(struct mt7915_dev *dev, void *data, int len)
total = le16_get_bits(free->ctrl, MT_TX_FREE_MSDU_CNT);
/* NOTE: 'v3' actually is checking for API version 4 */
v3 = (FIELD_GET(MT_TX_FREE_VER, txd) == 0x4);
- if (WARN_ON_ONCE((void *)&tx_info[total >> v3] > end))
- return;

for (cur_info = tx_info; count < total; cur_info++) {
- u32 msdu, info = le32_to_cpu(*cur_info);
+ u32 msdu, info;
u8 i;
u32 tx_cnt, tx_status, ampdu;

+ if (WARN_ON_ONCE((void*)cur_info > end))
+ return;
+
+ info = le32_to_cpu(*cur_info);
/*
* 1'b1: new wcid pair.
* 1'b0: msdu_id with the same 'wcid pair' as above.
--
2.20.1


2022-09-29 15:16:39

by Ben Greear

[permalink] [raw]
Subject: [PATCH 2/2] wifi: mt76: mt7915: add two additional errors to ack-failure mask.

From: Ben Greear <[email protected]>

These other two bits also indicate tx failure as far as I can tell from
reading the documents.

Signed-off-by: Ben Greear <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76_connac2_mac.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac2_mac.h b/drivers/net/wireless/mediatek/mt76/mt76_connac2_mac.h
index 67ce216fb564..075048ab784f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac2_mac.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac2_mac.h
@@ -133,10 +133,12 @@ enum {
#define MT_TXS0_TXOP_TIMEOUT BIT(20)
#define MT_TXS0_BIP_ERROR BIT(19)

+#define MT_TXS0_TXOP_LIMIT BIT(20)
+#define MT_TXS0_BIP_OR_BF_ERROR BIT(19)
#define MT_TXS0_QUEUE_TIMEOUT BIT(18)
#define MT_TXS0_RTS_TIMEOUT BIT(17)
#define MT_TXS0_ACK_TIMEOUT BIT(16)
-#define MT_TXS0_ACK_ERROR_MASK GENMASK(18, 16)
+#define MT_TXS0_ACK_ERROR_MASK GENMASK(20, 16)

#define MT_TXS0_TX_STATUS_HOST BIT(15)
#define MT_TXS0_TX_STATUS_MCU BIT(14)
--
2.20.1

2022-10-01 11:57:50

by Felix Fietkau

[permalink] [raw]
Subject: Re: [PATCH 2/2] wifi: mt76: mt7915: add two additional errors to ack-failure mask.

On 29.09.22 17:15, [email protected] wrote:
> From: Ben Greear <[email protected]>
>
> These other two bits also indicate tx failure as far as I can tell from
> reading the documents.
>
> Signed-off-by: Ben Greear <[email protected]>
The bits seem to have overlapping meaning, not sure if they always
reliably indicate an error. I think we should leave this patch out, as
it could potentially cause regressions.

- Felix