I using the DNMA-H5 from unex and compat 2013-04-16.
If the equipment with this card is placed in 30?C environment, with iperf I can send 150 Mbit/s.
If the equipment with this card is placed in 0?C environment my throughput is not stable and is around 40Mbit/s.
In this condition, I receive some CST interrupt burst. If I correctly understand the ATH9K driver code, when this interruption occur the driver only increase the interrupt counter.
Have you any information on this interrupt ? I googled but I don't found any information.
Do you know if the driver need a specific action to handle it ? If yes, could you give me some pointer to do that ?
How I can increase the timeout Value ?
If I tried with other Wireless card (DNMA-83 from unex for example) I have not this problem.
Any help will be appreciated.
Best regards.
Cedric Voncken
Am 10.10.2013 17:49, schrieb Cedric VONCKEN:
> I using the DNMA-H5 from unex and compat 2013-04-16.
>
> If the equipment with this card is placed in 30°C environment, with iperf I can send 150 Mbit/s.
>
> If the equipment with this card is placed in 0°C environment my throughput is not stable and is around 40Mbit/s.
> In this condition, I receive some CST interrupt burst. If I correctly understand the ATH9K driver code, when this interruption occur the driver only increase the interrupt counter.
>
> Have you any information on this interrupt ? I googled but I don't found any information.
CST - Carrier Sense Timeout.
> Do you know if the driver need a specific action to handle it ? If yes, could you give me some pointer to do that ?
I do not know. May be some body else knows.
> How I can increase the timeout Value ?
See AR_CST_TIMEOUT_LIMIT, it should be in useconds.
> If I tried with other Wireless card (DNMA-83 from unex for example) I have not this problem.
>
> Any help will be appreciated.
--
Regards,
Oleksij