From: Yun Lu <[email protected]>
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.
To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is writen, and use it the next
time the register need to be modified.
Signed-off-by: Yun Lu <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index c8cee4a24755..4088aaa1c618 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1518,6 +1518,7 @@ struct rtl8xxxu_priv {
u32 rege9c;
u32 regeb4;
u32 regebc;
+ u32 regrcr;
int next_mbox;
int nr_out_eps;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 620a5cc2bfdd..2fe71933ba08 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4053,6 +4053,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
rtl8xxxu_write32(priv, REG_RCR, val32);
+ priv->regrcr = val32;
if (priv->rtl_chip == RTL8188F) {
/* Accept all data frames */
@@ -6273,7 +6274,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
unsigned int *total_flags, u64 multicast)
{
struct rtl8xxxu_priv *priv = hw->priv;
- u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
+ u32 rcr = priv->regrcr;
dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
__func__, changed_flags, *total_flags);
@@ -6319,6 +6320,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
*/
rtl8xxxu_write32(priv, REG_RCR, rcr);
+ priv->regrcr = rcr;
*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
--
2.25.1
No virus found
Checked by Hillstone Network AntiVirus
On 5/10/23 22:18, Yun Lu wrote:
> From: Yun Lu <[email protected]>
>
> When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
> probability of failure, which shows "authentication with ... timed out".
> Through debugging, it was found that the RCR register has been inexplicably
> modified to an incorrect value, resulting in the nic not being able to
> receive authenticated frames.
>
> To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
> the RCR value every time the register is writen, and use it the next
> time the register need to be modified.
>
> Signed-off-by: Yun Lu <[email protected]>
> Link: https://lore.kernel.org/all/[email protected]
> ---
> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 +++-
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> index c8cee4a24755..4088aaa1c618 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> @@ -1518,6 +1518,7 @@ struct rtl8xxxu_priv {
> u32 rege9c;
> u32 regeb4;
> u32 regebc;
> + u32 regrcr;
> int next_mbox;
> int nr_out_eps;
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> index 620a5cc2bfdd..2fe71933ba08 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
> @@ -4053,6 +4053,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
> RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
> RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
> rtl8xxxu_write32(priv, REG_RCR, val32);
> + priv->regrcr = val32;
>
> if (priv->rtl_chip == RTL8188F) {
> /* Accept all data frames */
> @@ -6273,7 +6274,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
> unsigned int *total_flags, u64 multicast)
> {
> struct rtl8xxxu_priv *priv = hw->priv;
> - u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
> + u32 rcr = priv->regrcr;
>
> dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
> __func__, changed_flags, *total_flags);
> @@ -6319,6 +6320,7 @@ static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
> */
>
> rtl8xxxu_write32(priv, REG_RCR, rcr);
> + priv->regrcr = rcr;
>
> *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
> FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
Acked-by and Tested-by: Larry Finger <[email protected]>
Thanks,
Larry
On Wed, May 10, 2023 at 11:34:19PM -0500, Larry Finger wrote:
> On 5/10/23 22:18, Yun Lu wrote:
> > From: Yun Lu <[email protected]>
> >
> > When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
> > probability of failure, which shows "authentication with ... timed out".
> > Through debugging, it was found that the RCR register has been inexplicably
> > modified to an incorrect value, resulting in the nic not being able to
> > receive authenticated frames.
> >
> > To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
> > the RCR value every time the register is writen, and use it the next
nit: s/writen/written/
> > time the register need to be modified.
> >
> > Signed-off-by: Yun Lu <[email protected]>
...
At 2023-05-11 20:26:40, "Simon Horman" <[email protected]> wrote:
>On Wed, May 10, 2023 at 11:34:19PM -0500, Larry Finger wrote:
>> On 5/10/23 22:18, Yun Lu wrote:
>> > From: Yun Lu <[email protected]>
>> >
>> > When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
>> > probability of failure, which shows "authentication with ... timed out".
>> > Through debugging, it was found that the RCR register has been inexplicably
>> > modified to an incorrect value, resulting in the nic not being able to
>> > receive authenticated frames.
>> >
>> > To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
>> > the RCR value every time the register is writen, and use it the next
>
>nit: s/writen/written/
>
>> > time the register need to be modified.
>> >
>> > Signed-off-by: Yun Lu <[email protected]>
>
>...
Yeah, it's my mistake. I will send a third version later to correct it.
Thanks.