2016-09-26 10:37:34

by Prameela Rani Garnepudi

[permalink] [raw]
Subject: [PATCH] rsi: update in vap_capabilities frame to device

added vap status(add/delete) field in vap capabilities frame to device
added sending vap capabilites frame(with vap status 'delete') in remove interface

Signed-off-by: Prameela Rani Garnepudi <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 12 ++++++++----
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 8 ++++++--
drivers/net/wireless/rsi/rsi_mgmt.h | 9 ++++++++-
3 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index dbb2389..d5b17b1 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -304,13 +304,15 @@ static int rsi_mac80211_add_interface(struct ieee80211_hw *hw,
if (!adapter->sc_nvifs) {
++adapter->sc_nvifs;
adapter->vifs[0] = vif;
- ret = rsi_set_vap_capabilities(common, STA_OPMODE);
+ ret = rsi_set_vap_capabilities(common,
+ STA_OPMODE,
+ VAP_ADD);
}
break;
default:
rsi_dbg(ERR_ZONE,
- "%s: Interface type %d not supported\n", __func__,
- vif->type);
+ "%s: Interface type %d not supported\n",
+ __func__, vif->type);
}
mutex_unlock(&common->mutex);

@@ -332,8 +334,10 @@ static void rsi_mac80211_remove_interface(struct ieee80211_hw *hw,
struct rsi_common *common = adapter->priv;

mutex_lock(&common->mutex);
- if (vif->type == NL80211_IFTYPE_STATION)
+ if (vif->type == NL80211_IFTYPE_STATION) {
adapter->sc_nvifs--;
+ rsi_set_vap_capabilities(common, STA_OPMODE, VAP_DELETE);
+ }

if (!memcmp(adapter->vifs[0], vif, sizeof(struct ieee80211_vif)))
adapter->vifs[0] = NULL;
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index 35c14cc..c41bb4f 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -617,7 +617,9 @@ static int rsi_program_bb_rf(struct rsi_common *common)
*
* Return: 0 on success, corresponding negative error code on failure.
*/
-int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
+int rsi_set_vap_capabilities(struct rsi_common *common,
+ enum opmode mode,
+ u8 vap_status)
{
struct sk_buff *skb = NULL;
struct rsi_vap_caps *vap_caps;
@@ -626,7 +628,8 @@ int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
struct ieee80211_conf *conf = &hw->conf;
u16 vap_id = 0;

- rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Sending VAP capabilities frame\n", __func__);

skb = dev_alloc_skb(sizeof(struct rsi_vap_caps));
if (!skb) {
@@ -642,6 +645,7 @@ int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
FRAME_DESC_SZ) |
(RSI_WIFI_MGMT_Q << 12));
vap_caps->desc_word[1] = cpu_to_le16(VAP_CAPABILITIES);
+ vap_caps->desc_word[2] = cpu_to_le16(vap_status << 8);
vap_caps->desc_word[4] = cpu_to_le16(mode |
(common->channel_width << 8));
vap_caps->desc_word[7] = cpu_to_le16((vap_id << 8) |
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index 3741173..d155358 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -145,6 +145,12 @@ enum opmode {
AP_OPMODE = 2
};

+enum vap_status {
+ VAP_ADD = 1,
+ VAP_DELETE = 2,
+ VAP_UPDATE = 3
+};
+
extern struct ieee80211_rate rsi_rates[12];
extern const u16 rsi_mcsrates[8];

@@ -287,7 +293,8 @@ static inline u8 rsi_get_channel(u8 *addr)
}

int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
-int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode);
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode,
+ u8 vap_status);
int rsi_send_aggregation_params_frame(struct rsi_common *common, u16 tid,
u16 ssn, u8 buf_size, u8 event);
int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len,
--
2.4.11


2016-10-12 14:39:39

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH] rsi: update in vap_capabilities frame to device

Kalle Valo <[email protected]> writes:

> Prameela Rani Garnepudi <[email protected]> writes:
>
>> added vap status(add/delete) field in vap capabilities frame to device
>> added sending vap capabilites frame(with vap status 'delete') in remove =
interface
>>
>> Signed-off-by: Prameela Rani Garnepudi <[email protected]>
>
> Why? How is this better now? I'm sure there is a good reason why you add
> this but we don't know as the commit tells nothing we don't already know
> just from looking at the patch.
>
> The most important part of commit log is to answer the question "Why?",
> not "What?".

Oh, and USE capitalisation, punctuation and so on in the commit log. It
will be archived to git.

--=20
Kalle Valo=

2016-10-12 14:29:19

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH] rsi: update in vap_capabilities frame to device

Prameela Rani Garnepudi <[email protected]> writes:

> added vap status(add/delete) field in vap capabilities frame to device
> added sending vap capabilites frame(with vap status 'delete') in remove interface
>
> Signed-off-by: Prameela Rani Garnepudi <[email protected]>

Why? How is this better now? I'm sure there is a good reason why you add
this but we don't know as the commit tells nothing we don't already know
just from looking at the patch.

The most important part of commit log is to answer the question "Why?",
not "What?".

> rsi_dbg(ERR_ZONE,
> - "%s: Interface type %d not supported\n", __func__,
> - vif->type);
> + "%s: Interface type %d not supported\n",
> + __func__, vif->type);

Unnecessary style change, please drop.

> - rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
> + rsi_dbg(MGMT_TX_ZONE,
> + "%s: Sending VAP capabilities frame\n", __func__);

Same here.

--
Kalle Valo