[please CC me since I'm not subscribed to the lists and terribly sorry
for HTML mails]
Oh hai!
I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
supported by linux-firmware (git master), card init fails with
>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
It works fine with board-2.bin from the compex website [1] (can be
downloaded directly from
https://bugzilla.kernel.org/attachment.cgi?id=274959).
What should be done to have it upstreamed?
[1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
//wbr ojab
Gentle ping.
//wbr ojab
On Tue, Mar 27, 2018 at 4:41 PM, ojab // <[email protected]> wrote:
> [please CC me since I'm not subscribed to the lists and terribly sorry
> for HTML mails]
>
> Oh hai!
>
> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
> supported by linux-firmware (git master), card init fails with
>
>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
>
> It works fine with board-2.bin from the compex website [1] (can be
> downloaded directly from
> https://bugzilla.kernel.org/attachment.cgi?id=274959).
> What should be done to have it upstreamed?
>
> [1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
>
> //wbr ojab
Josh Boyer <[email protected]> writes:
> On Tue, Mar 27, 2018 at 12:41 PM, ojab // <[email protected]> wrote:
>> [please CC me since I'm not subscribed to the lists and terribly sorry
>> for HTML mails]
>>
>> Oh hai!
>>
>> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
>> supported by linux-firmware (git master), card init fails with
>>
>>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch
>> board data for bus=3Dpci,bmi-chip-id=3D0,bmi-board-id=3D30 from
>> ath10k/QCA9984/hw1.0/board-2.bin
>>
>> It works fine with board-2.bin from the compex website [1] (can be
>> downloaded directly from
>> https://bugzilla.kernel.org/attachment.cgi?id=3D274959).
>> What should be done to have it upstreamed?
>
> This is likely a question for Kalle. I would expect an update to the
> existing board-2.bin file submitted through Qualcomm with support for
> that device.
Yes, this should have been sent to the ath10k list, not to
linux-firmware.
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support
--=20
Kalle Valo=
On Tue, Mar 27, 2018 at 12:41 PM, ojab // <[email protected]> wrote:
> [please CC me since I'm not subscribed to the lists and terribly sorry
> for HTML mails]
>
> Oh hai!
>
> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
> supported by linux-firmware (git master), card init fails with
>
>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from ath10k/QCA9984/hw1.0/board-2.bin
>
> It works fine with board-2.bin from the compex website [1] (can be
> downloaded directly from
> https://bugzilla.kernel.org/attachment.cgi?id=274959).
> What should be done to have it upstreamed?
This is likely a question for Kalle. I would expect an update to the
existing board-2.bin file submitted through Qualcomm with support for
that device.
josh
>
> [1] https://downloads.compex.com.sg/?dir=uploads/boardData/For_Building_New_Firmware
>
> //wbr ojab
On Mon, Apr 16, 2018 at 1:54 PM, Kalle Valo <[email protected]> wrote:
> Josh Boyer <[email protected]> writes:
>
>> On Tue, Mar 27, 2018 at 12:41 PM, ojab // <[email protected]> wrote:
>>> [please CC me since I'm not subscribed to the lists and terribly sorry
>>> for HTML mails]
>>>
>>> Oh hai!
>>>
>>> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't
>>> supported by linux-firmware (git master), card init fails with
>>>
>>>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch
>>> board data for bus=pci,bmi-chip-id=0,bmi-board-id=30 from
>>> ath10k/QCA9984/hw1.0/board-2.bin
>>>
>>> It works fine with board-2.bin from the compex website [1] (can be
>>> downloaded directly from
>>> https://bugzilla.kernel.org/attachment.cgi?id=274959).
>>> What should be done to have it upstreamed?
>>
>> This is likely a question for Kalle. I would expect an update to the
>> existing board-2.bin file submitted through Qualcomm with support for
>> that device.
>
> Yes, this should have been sent to the ath10k list, not to
> linux-firmware.
>
> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support
Thanks, sent the same email there.