The following set of patches add support for new channels on
60GHz band and EDMG channels:
Changelog:
V7:
- Checkpatch fix in wil6210 driver
- Verify stats initialized in wil6210 driver
V6:
- Update commit message
- Initialize chandef variable
V5:
- Addressed to comments from the community
- Added enum for bw_config
- Updated nla_policy to NLA_POLICY_RANGE()
V4:
- Addressed to comments from the community
- Updated comments and variable name
V3:
- Addressed to comments from the community
- Added 60G check for verifying some EDMG cases are relevant
- Used the ieee80211_sta_edmg_cap struct as the edmg channel configuration
- Updated nla_policy to NLA_POLICY_RANGE()
V2
- Addressed to comments from the community
- Align to latest Spec release
Alexei Avshalom Lazar (2):
wil6210: Add EDMG channel support
nl support for dmtool
drivers/net/wireless/ath/wil6210/Kconfig | 11 ++
drivers/net/wireless/ath/wil6210/Makefile | 1 +
drivers/net/wireless/ath/wil6210/cfg80211.c | 206 +++++++++++++++++++++-
drivers/net/wireless/ath/wil6210/ioctl.c | 245 +++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 8 +
drivers/net/wireless/ath/wil6210/txrx_edma.c | 2 +
drivers/net/wireless/ath/wil6210/txrx_edma.h | 6 +
drivers/net/wireless/ath/wil6210/wil6210.h | 9 +-
drivers/net/wireless/ath/wil6210/wmi.c | 5 +-
drivers/net/wireless/ath/wil6210/wmi.h | 26 ++-
include/uapi/linux/wil6210_uapi.h | 77 +++++++++
11 files changed, 583 insertions(+), 13 deletions(-)
create mode 100644 drivers/net/wireless/ath/wil6210/ioctl.c
create mode 100644 include/uapi/linux/wil6210_uapi.h
--
2.7.4
Add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11.
wil6210 reports it's EDMG capabilities (that are also based on FW
capability) to cfg80211 by filling
wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.
wil6210 handles edmg.channels and edmg.bw_config requested in connect
and start_ap operations.
Signed-off-by: Alexei Avshalom Lazar <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 206 +++++++++++++++++++++++++--
drivers/net/wireless/ath/wil6210/txrx_edma.c | 2 +
drivers/net/wireless/ath/wil6210/txrx_edma.h | 6 +
drivers/net/wireless/ath/wil6210/wil6210.h | 8 +-
drivers/net/wireless/ath/wil6210/wmi.c | 5 +-
drivers/net/wireless/ath/wil6210/wmi.h | 26 +++-
6 files changed, 240 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 2414f57..1883690 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -25,6 +25,22 @@
#define WIL_MAX_ROC_DURATION_MS 5000
+#define WIL_EDMG_CHANNEL_9_SUBCHANNELS (BIT(0) | BIT(1))
+#define WIL_EDMG_CHANNEL_10_SUBCHANNELS (BIT(1) | BIT(2))
+#define WIL_EDMG_CHANNEL_11_SUBCHANNELS (BIT(2) | BIT(3))
+
+/* WIL_EDMG_BW_CONFIGURATION define the allowed channel bandwidth
+ * configurations as defined by IEEE 802.11 section 9.4.2.251, Table 13.
+ * The value 5 allowing CB1 and CB2 of adjacent channels.
+ */
+#define WIL_EDMG_BW_CONFIGURATION 5
+
+/* WIL_EDMG_CHANNELS is a bitmap that indicates the 2.16 GHz channel(s) that
+ * are allowed to be used for EDMG transmissions in the BSS as defined by
+ * IEEE 802.11 section 9.4.2.251.
+ */
+#define WIL_EDMG_CHANNELS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
bool disable_ap_sme;
module_param(disable_ap_sme, bool, 0444);
MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME");
@@ -51,6 +67,39 @@ static struct ieee80211_channel wil_60ghz_channels[] = {
CHAN60G(4, 0),
};
+/* Rx channel bonding mode */
+enum wil_rx_cb_mode {
+ WIL_RX_CB_MODE_DMG,
+ WIL_RX_CB_MODE_EDMG,
+ WIL_RX_CB_MODE_WIDE,
+};
+
+static int wil_rx_cb_mode_to_n_bonded(u8 cb_mode)
+{
+ switch (cb_mode) {
+ case WIL_RX_CB_MODE_DMG:
+ case WIL_RX_CB_MODE_EDMG:
+ return 1;
+ case WIL_RX_CB_MODE_WIDE:
+ return 2;
+ default:
+ return 1;
+ }
+}
+
+static int wil_tx_cb_mode_to_n_bonded(u8 cb_mode)
+{
+ switch (cb_mode) {
+ case WMI_TX_MODE_DMG:
+ case WMI_TX_MODE_EDMG_CB1:
+ return 1;
+ case WMI_TX_MODE_EDMG_CB2:
+ return 2;
+ default:
+ return 1;
+ }
+}
+
static void
wil_memdup_ie(u8 **pdst, size_t *pdst_len, const u8 *src, size_t src_len)
{
@@ -82,6 +131,13 @@ void update_supported_bands(struct wil6210_priv *wil)
wiphy->bands[NL80211_BAND_60GHZ]->n_channels =
wil_num_supported_channels(wil);
+
+ if (test_bit(WMI_FW_CAPABILITY_CHANNEL_BONDING, wil->fw_capabilities)) {
+ wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.channels =
+ WIL_EDMG_CHANNELS;
+ wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.bw_config =
+ WIL_EDMG_BW_CONFIGURATION;
+ }
}
/* Vendor id to be used in vendor specific command and events
@@ -300,6 +356,86 @@ int wil_iftype_nl2wmi(enum nl80211_iftype type)
return -EOPNOTSUPP;
}
+int wil_spec2wmi_ch(u8 spec_ch, u8 *wmi_ch)
+{
+ switch (spec_ch) {
+ case 1:
+ *wmi_ch = WMI_CHANNEL_1;
+ break;
+ case 2:
+ *wmi_ch = WMI_CHANNEL_2;
+ break;
+ case 3:
+ *wmi_ch = WMI_CHANNEL_3;
+ break;
+ case 4:
+ *wmi_ch = WMI_CHANNEL_4;
+ break;
+ case 5:
+ *wmi_ch = WMI_CHANNEL_5;
+ break;
+ case 6:
+ *wmi_ch = WMI_CHANNEL_6;
+ break;
+ case 9:
+ *wmi_ch = WMI_CHANNEL_9;
+ break;
+ case 10:
+ *wmi_ch = WMI_CHANNEL_10;
+ break;
+ case 11:
+ *wmi_ch = WMI_CHANNEL_11;
+ break;
+ case 12:
+ *wmi_ch = WMI_CHANNEL_12;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int wil_wmi2spec_ch(u8 wmi_ch, u8 *spec_ch)
+{
+ switch (wmi_ch) {
+ case WMI_CHANNEL_1:
+ *spec_ch = 1;
+ break;
+ case WMI_CHANNEL_2:
+ *spec_ch = 2;
+ break;
+ case WMI_CHANNEL_3:
+ *spec_ch = 3;
+ break;
+ case WMI_CHANNEL_4:
+ *spec_ch = 4;
+ break;
+ case WMI_CHANNEL_5:
+ *spec_ch = 5;
+ break;
+ case WMI_CHANNEL_6:
+ *spec_ch = 6;
+ break;
+ case WMI_CHANNEL_9:
+ *spec_ch = 9;
+ break;
+ case WMI_CHANNEL_10:
+ *spec_ch = 10;
+ break;
+ case WMI_CHANNEL_11:
+ *spec_ch = 11;
+ break;
+ case WMI_CHANNEL_12:
+ *spec_ch = 12;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
struct station_info *sinfo)
{
@@ -314,6 +450,7 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
} __packed reply;
struct wil_net_stats *stats = &wil->sta[cid].stats;
int rc;
+ u8 txflag = RATE_INFO_FLAGS_DMG;
memset(&reply, 0, sizeof(reply));
@@ -327,7 +464,8 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
" MCS %d TSF 0x%016llx\n"
" BF status 0x%08x RSSI %d SQI %d%%\n"
" Tx Tpt %d goodput %d Rx goodput %d\n"
- " Sectors(rx:tx) my %d:%d peer %d:%d\n""}\n",
+ " Sectors(rx:tx) my %d:%d peer %d:%d\n"
+ " Tx mode %d}\n",
cid, vif->mid, le16_to_cpu(reply.evt.bf_mcs),
le64_to_cpu(reply.evt.tsf), reply.evt.status,
reply.evt.rssi,
@@ -338,7 +476,8 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
le16_to_cpu(reply.evt.my_rx_sector),
le16_to_cpu(reply.evt.my_tx_sector),
le16_to_cpu(reply.evt.other_rx_sector),
- le16_to_cpu(reply.evt.other_tx_sector));
+ le16_to_cpu(reply.evt.other_tx_sector),
+ reply.evt.tx_mode);
sinfo->generation = wil->sinfo_gen;
@@ -351,9 +490,16 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) |
BIT_ULL(NL80211_STA_INFO_TX_FAILED);
- sinfo->txrate.flags = RATE_INFO_FLAGS_DMG;
+ if (wil->use_enhanced_dma_hw && reply.evt.tx_mode != WMI_TX_MODE_DMG)
+ txflag = RATE_INFO_FLAGS_EDMG;
+
+ sinfo->txrate.flags = txflag;
sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs);
sinfo->rxrate.mcs = stats->last_mcs_rx;
+ sinfo->txrate.n_bonded_ch =
+ wil_tx_cb_mode_to_n_bonded(reply.evt.tx_mode);
+ sinfo->rxrate.n_bonded_ch =
+ wil_rx_cb_mode_to_n_bonded(stats->last_cb_mode_rx);
sinfo->rx_bytes = stats->rx_bytes;
sinfo->rx_packets = stats->rx_packets;
sinfo->rx_dropped_misc = stats->rx_dropped;
@@ -1022,6 +1168,33 @@ static int wil_ft_connect(struct wiphy *wiphy,
return rc;
}
+static int wil_get_wmi_edmg_channel(struct wil6210_priv *wil, u8 edmg_bw_config,
+ u8 edmg_channels, u8 *wmi_ch)
+{
+ if (!edmg_bw_config) {
+ *wmi_ch = 0;
+ return 0;
+ } else if (edmg_bw_config == WIL_EDMG_BW_CONFIGURATION) {
+ /* convert from edmg channel bitmap into edmg channel number */
+ switch (edmg_channels) {
+ case WIL_EDMG_CHANNEL_9_SUBCHANNELS:
+ return wil_spec2wmi_ch(9, wmi_ch);
+ case WIL_EDMG_CHANNEL_10_SUBCHANNELS:
+ return wil_spec2wmi_ch(10, wmi_ch);
+ case WIL_EDMG_CHANNEL_11_SUBCHANNELS:
+ return wil_spec2wmi_ch(11, wmi_ch);
+ default:
+ wil_err(wil, "Unsupported edmg channel bitmap 0x%x\n",
+ edmg_channels);
+ return -EINVAL;
+ }
+ } else {
+ wil_err(wil, "Unsupported EDMG BW configuration %d\n",
+ edmg_bw_config);
+ return -EINVAL;
+ }
+}
+
static int wil_cfg80211_connect(struct wiphy *wiphy,
struct net_device *ndev,
struct cfg80211_connect_params *sme)
@@ -1167,6 +1340,11 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
conn.channel = ch - 1;
+ rc = wil_get_wmi_edmg_channel(wil, sme->edmg.bw_config,
+ sme->edmg.channels, &conn.edmg_channel);
+ if (rc < 0)
+ return rc;
+
ether_addr_copy(conn.bssid, bss->bssid);
ether_addr_copy(conn.dst_mac, bss->bssid);
@@ -1728,7 +1906,7 @@ static int _wil_cfg80211_set_ies(struct wil6210_vif *vif,
static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
struct net_device *ndev,
const u8 *ssid, size_t ssid_len, u32 privacy,
- int bi, u8 chan,
+ int bi, u8 chan, u8 wmi_edmg_channel,
struct cfg80211_beacon_data *bcon,
u8 hidden_ssid, u32 pbss)
{
@@ -1791,6 +1969,7 @@ static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
vif->privacy = privacy;
vif->channel = chan;
+ vif->wmi_edmg_channel = wmi_edmg_channel;
vif->hidden_ssid = hidden_ssid;
vif->pbss = pbss;
vif->bi = bi;
@@ -1801,7 +1980,8 @@ static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
if (!wil_has_other_active_ifaces(wil, ndev, false, true))
wil6210_bus_request(wil, WIL_MAX_BUS_REQUEST_KBPS);
- rc = wmi_pcp_start(vif, bi, wmi_nettype, chan, hidden_ssid, is_go);
+ rc = wmi_pcp_start(vif, bi, wmi_nettype, chan, wmi_edmg_channel,
+ hidden_ssid, is_go);
if (rc)
goto err_pcp_start;
@@ -1853,7 +2033,8 @@ void wil_cfg80211_ap_recovery(struct wil6210_priv *wil)
rc = _wil_cfg80211_start_ap(wiphy, ndev,
vif->ssid, vif->ssid_len,
vif->privacy, vif->bi,
- vif->channel, &bcon,
+ vif->channel,
+ vif->wmi_edmg_channel, &bcon,
vif->hidden_ssid, vif->pbss);
if (rc) {
wil_err(wil, "vif %d recovery failed (%d)\n", i, rc);
@@ -1903,7 +2084,8 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
rc = _wil_cfg80211_start_ap(wiphy, ndev, vif->ssid,
vif->ssid_len, privacy,
wdev->beacon_interval,
- vif->channel, bcon,
+ vif->channel,
+ vif->wmi_edmg_channel, bcon,
vif->hidden_ssid,
vif->pbss);
} else {
@@ -1922,10 +2104,17 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
struct ieee80211_channel *channel = info->chandef.chan;
struct cfg80211_beacon_data *bcon = &info->beacon;
struct cfg80211_crypto_settings *crypto = &info->crypto;
+ u8 wmi_edmg_channel;
u8 hidden_ssid;
wil_dbg_misc(wil, "start_ap\n");
+ rc = wil_get_wmi_edmg_channel(wil, info->chandef.edmg.bw_config,
+ info->chandef.edmg.channels,
+ &wmi_edmg_channel);
+ if (rc < 0)
+ return rc;
+
if (!channel) {
wil_err(wil, "AP: No channel???\n");
return -EINVAL;
@@ -1965,7 +2154,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
rc = _wil_cfg80211_start_ap(wiphy, ndev,
info->ssid, info->ssid_len, info->privacy,
info->beacon_interval, channel->hw_value,
- bcon, hidden_ssid, info->pbss);
+ wmi_edmg_channel, bcon, hidden_ssid,
+ info->pbss);
return rc;
}
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index 71b7ad4..29a9a24 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -1023,6 +1023,8 @@ static struct sk_buff *wil_sring_reap_rx_edma(struct wil6210_priv *wil,
stats->last_mcs_rx = wil_rx_status_get_mcs(msg);
if (stats->last_mcs_rx < ARRAY_SIZE(stats->rx_per_mcs))
stats->rx_per_mcs[stats->last_mcs_rx]++;
+
+ stats->last_cb_mode_rx = wil_rx_status_get_cb_mode(msg);
}
if (!wil->use_rx_hw_reordering && !wil->use_compressed_rx_status &&
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.h b/drivers/net/wireless/ath/wil6210/txrx_edma.h
index e9e6ea9..724d223 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.h
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.h
@@ -366,6 +366,12 @@ static inline u8 wil_rx_status_get_mcs(void *msg)
16, 21);
}
+static inline u8 wil_rx_status_get_cb_mode(void *msg)
+{
+ return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
+ 22, 23);
+}
+
static inline u16 wil_rx_status_get_flow_id(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 6f456b3..d8c78a0 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -590,6 +590,7 @@ struct wil_net_stats {
unsigned long rx_amsdu_error; /* eDMA specific */
unsigned long rx_csum_err;
u16 last_mcs_rx;
+ u8 last_cb_mode_rx;
u64 rx_per_mcs[WIL_MCS_MAX + 1];
u32 ft_roams; /* relevant in STA mode */
};
@@ -850,6 +851,7 @@ struct wil6210_vif {
DECLARE_BITMAP(status, wil_vif_status_last);
u32 privacy; /* secure connection? */
u16 channel; /* relevant in AP mode */
+ u8 wmi_edmg_channel; /* relevant in AP mode */
u8 hidden_ssid; /* relevant in AP mode */
u32 ap_isolate; /* no intra-BSS communication */
bool pbss;
@@ -1335,7 +1337,7 @@ void wil_p2p_wdev_free(struct wil6210_priv *wil);
int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
int wmi_pcp_start(struct wil6210_vif *vif, int bi, u8 wmi_nettype, u8 chan,
- u8 hidden_ssid, u8 is_go);
+ u8 edmg_chan, u8 hidden_ssid, u8 is_go);
int wmi_pcp_stop(struct wil6210_vif *vif);
int wmi_led_cfg(struct wil6210_priv *wil, bool enable);
int wmi_abort_scan(struct wil6210_vif *vif);
@@ -1412,6 +1414,10 @@ int wmi_mgmt_tx_ext(struct wil6210_vif *vif, const u8 *buf, size_t len,
u8 channel, u16 duration_ms);
int wmi_rbufcap_cfg(struct wil6210_priv *wil, bool enable, u16 threshold);
+int wil_wmi2spec_ch(u8 wmi_ch, u8 *spec_ch);
+int wil_spec2wmi_ch(u8 spec_ch, u8 *wmi_ch);
+void wil_update_supported_bands(struct wil6210_priv *wil);
+
int reverse_memcmp(const void *cs, const void *ct, size_t count);
/* WMI for enhanced DMA */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 475b1a2..5760d14 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2163,8 +2163,8 @@ int wmi_rbufcap_cfg(struct wil6210_priv *wil, bool enable, u16 threshold)
return rc;
}
-int wmi_pcp_start(struct wil6210_vif *vif,
- int bi, u8 wmi_nettype, u8 chan, u8 hidden_ssid, u8 is_go)
+int wmi_pcp_start(struct wil6210_vif *vif, int bi, u8 wmi_nettype,
+ u8 chan, u8 wmi_edmg_chan, u8 hidden_ssid, u8 is_go)
{
struct wil6210_priv *wil = vif_to_wil(vif);
int rc;
@@ -2174,6 +2174,7 @@ int wmi_pcp_start(struct wil6210_vif *vif,
.network_type = wmi_nettype,
.disable_sec_offload = 1,
.channel = chan - 1,
+ .edmg_channel = wmi_edmg_chan,
.pcp_max_assoc_sta = wil->max_assoc_sta,
.hidden_ssid = hidden_ssid,
.is_go = is_go,
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 3e37229..d75022b 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -97,6 +97,7 @@ enum wmi_fw_capability {
WMI_FW_CAPABILITY_SET_SILENT_RSSI_TABLE = 13,
WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP = 14,
WMI_FW_CAPABILITY_PNO = 15,
+ WMI_FW_CAPABILITY_CHANNEL_BONDING = 17,
WMI_FW_CAPABILITY_REF_CLOCK_CONTROL = 18,
WMI_FW_CAPABILITY_AP_SME_OFFLOAD_NONE = 19,
WMI_FW_CAPABILITY_MULTI_VIFS = 20,
@@ -361,6 +362,19 @@ enum wmi_connect_ctrl_flag_bits {
#define WMI_MAX_SSID_LEN (32)
+enum wmi_channel {
+ WMI_CHANNEL_1 = 0x00,
+ WMI_CHANNEL_2 = 0x01,
+ WMI_CHANNEL_3 = 0x02,
+ WMI_CHANNEL_4 = 0x03,
+ WMI_CHANNEL_5 = 0x04,
+ WMI_CHANNEL_6 = 0x05,
+ WMI_CHANNEL_9 = 0x06,
+ WMI_CHANNEL_10 = 0x07,
+ WMI_CHANNEL_11 = 0x08,
+ WMI_CHANNEL_12 = 0x09,
+};
+
/* WMI_CONNECT_CMDID */
struct wmi_connect_cmd {
u8 network_type;
@@ -372,8 +386,12 @@ struct wmi_connect_cmd {
u8 group_crypto_len;
u8 ssid_len;
u8 ssid[WMI_MAX_SSID_LEN];
+ /* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
+ * the primary channel number
+ */
u8 channel;
- u8 reserved0;
+ /* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
+ u8 edmg_channel;
u8 bssid[WMI_MAC_LEN];
__le32 ctrl_flags;
u8 dst_mac[WMI_MAC_LEN];
@@ -2312,8 +2330,12 @@ struct wmi_notify_req_done_event {
/* WMI_CONNECT_EVENTID */
struct wmi_connect_event {
+ /* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
+ * the primary channel number
+ */
u8 channel;
- u8 reserved0;
+ /* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
+ u8 edmg_channel;
u8 bssid[WMI_MAC_LEN];
__le16 listen_interval;
__le16 beacon_interval;
--
2.7.4
Signed-off-by: Alexei Avshalom Lazar <[email protected]>
---
drivers/net/wireless/ath/wil6210/Kconfig | 11 ++
drivers/net/wireless/ath/wil6210/Makefile | 1 +
drivers/net/wireless/ath/wil6210/ioctl.c | 245 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/netdev.c | 8 +
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
include/uapi/linux/wil6210_uapi.h | 77 +++++++++
6 files changed, 343 insertions(+)
create mode 100644 drivers/net/wireless/ath/wil6210/ioctl.c
create mode 100644 include/uapi/linux/wil6210_uapi.h
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 0d1a8da..48b14de 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -53,3 +53,14 @@ config WIL6210_DEBUGFS
option if you are interested in debugging the driver.
If unsure, say Y to make it easier to debug problems.
+
+config WIL6210_WRITE_IOCTL
+ bool "wil6210 write ioctl to the device"
+ depends on WIL6210
+ default y
+ help
+ Say Y here to allow write-access from user-space to
+ the device memory through ioctl. This is useful for
+ debugging purposes only.
+
+ If unsure, say N.
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
index 53a0d995..83a9696 100644
--- a/drivers/net/wireless/ath/wil6210/Makefile
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -12,6 +12,7 @@ wil6210-y += txrx.o
wil6210-y += txrx_edma.o
wil6210-y += debug.o
wil6210-y += rx_reorder.o
+wil6210-y += ioctl.o
wil6210-y += fw.o
wil6210-y += pm.o
wil6210-y += pmc.o
diff --git a/drivers/net/wireless/ath/wil6210/ioctl.c b/drivers/net/wireless/ath/wil6210/ioctl.c
new file mode 100644
index 0000000..a3af6f5
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/ioctl.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: ISC
+/* Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/uaccess.h>
+
+#include "wil6210.h"
+#include <uapi/linux/wil6210_uapi.h>
+
+#define wil_hex_dump_ioctl(prefix_str, buf, len) \
+ print_hex_dump_debug("DBG[IOC ]" prefix_str, \
+ DUMP_PREFIX_OFFSET, 16, 1, buf, len, true)
+#define wil_dbg_ioctl(wil, fmt, arg...) wil_dbg(wil, "DBG[IOC ]" fmt, ##arg)
+
+#define WIL_PRIV_DATA_MAX_LEN 8192
+#define CMD_SET_AP_WPS_P2P_IE "SET_AP_WPS_P2P_IE"
+/* max memory block for read/write in bytes. BAR size + spare */
+#define WIL_MAX_MEM_BLOCK_SIZE (8 * 1024 * 1024)
+
+struct wil_android_priv_data {
+ char *buf;
+ int used_len;
+ int total_len;
+};
+
+static void __iomem *wil_ioc_addr(struct wil6210_priv *wil, u32 addr,
+ u32 size, enum wil_memio_op op)
+{
+ void __iomem *a;
+ u32 off;
+
+ switch (op & wil_mmio_addr_mask) {
+ case wil_mmio_addr_linker:
+ a = wmi_buffer(wil, cpu_to_le32(addr));
+ break;
+ case wil_mmio_addr_ahb:
+ a = wmi_addr(wil, addr);
+ break;
+ case wil_mmio_addr_bar:
+ a = wmi_addr(wil, addr + WIL6210_FW_HOST_OFF);
+ break;
+ default:
+ wil_err(wil, "Unsupported address mode, op = 0x%08x\n", op);
+ return NULL;
+ }
+
+ off = a - wil->csr;
+ if (size >= wil->bar_size - off) {
+ wil_err(wil,
+ "Invalid requested block: off(0x%08x) size(0x%08x)\n",
+ off, size);
+ return NULL;
+ }
+
+ return a;
+}
+
+static int wil_ioc_memio_dword(struct wil6210_priv *wil, void __user *data)
+{
+ struct wil_memio io;
+ void __iomem *a;
+ bool need_copy = false;
+
+ if (copy_from_user(&io, data, sizeof(io)))
+ return -EFAULT;
+
+ wil_dbg_ioctl(wil, "IO: addr = 0x%08x val = 0x%08x op = 0x%08x\n",
+ io.addr, io.val, io.op);
+
+ a = wil_ioc_addr(wil, io.addr, sizeof(u32), io.op);
+ if (!a) {
+ wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
+ io.op);
+ return -EINVAL;
+ }
+ /* operation */
+ switch (io.op & wil_mmio_op_mask) {
+ case wil_mmio_read:
+ io.val = readl_relaxed(a);
+ need_copy = true;
+ break;
+#if defined(CONFIG_WIL6210_WRITE_IOCTL)
+ case wil_mmio_write:
+ writel_relaxed(io.val, a);
+ wmb(); /* make sure write propagated to HW */
+ break;
+#endif
+ default:
+ wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
+ return -EINVAL;
+ }
+
+ if (need_copy) {
+ wil_dbg_ioctl(wil,
+ "IO done: addr(0x%08x) val(0x%08x) op(0x%08x)\n",
+ io.addr, io.val, io.op);
+ if (copy_to_user(data, &io, sizeof(io)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int wil_ioc_memio_block(struct wil6210_priv *wil, void __user *data)
+{
+ struct wil_memio_block io;
+ void *block;
+ void __iomem *a;
+ int rc = 0;
+
+ if (copy_from_user(&io, data, sizeof(io)))
+ return -EFAULT;
+
+ wil_dbg_ioctl(wil, "IO: addr = 0x%08x size = 0x%08x op = 0x%08x\n",
+ io.addr, io.size, io.op);
+
+ /* size */
+ if (io.size > WIL_MAX_MEM_BLOCK_SIZE) {
+ wil_err(wil, "size is too large: 0x%08x\n", io.size);
+ return -EINVAL;
+ }
+ if (io.size % 4) {
+ wil_err(wil, "size is not multiple of 4: 0x%08x\n", io.size);
+ return -EINVAL;
+ }
+
+ a = wil_ioc_addr(wil, io.addr, io.size, io.op);
+ if (!a) {
+ wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
+ io.op);
+ return -EINVAL;
+ }
+
+ block = kmalloc(io.size, GFP_USER);
+ if (!block)
+ return -ENOMEM;
+
+ /* operation */
+ switch (io.op & wil_mmio_op_mask) {
+ case wil_mmio_read:
+ wil_memcpy_fromio_32(block, a, io.size);
+ wil_hex_dump_ioctl("Read ", block, io.size);
+ if (copy_to_user(io.block, block, io.size)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+ break;
+#if defined(CONFIG_WIL6210_WRITE_IOCTL)
+ case wil_mmio_write:
+ if (copy_from_user(block, io.block, io.size)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+ wil_memcpy_toio_32(a, block, io.size);
+ wmb(); /* make sure write propagated to HW */
+ wil_hex_dump_ioctl("Write ", block, io.size);
+ break;
+#endif
+ default:
+ wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
+ rc = -EINVAL;
+ break;
+ }
+
+out_free:
+ kfree(block);
+ return rc;
+}
+
+static int wil_ioc_android(struct wil6210_priv *wil, void __user *data)
+{
+ int rc = 0;
+ char *command;
+ struct wil_android_priv_data priv_data;
+
+ wil_dbg_ioctl(wil, "ioc_android\n");
+
+ if (copy_from_user(&priv_data, data, sizeof(priv_data)))
+ return -EFAULT;
+
+ if (priv_data.total_len <= 0 ||
+ priv_data.total_len >= WIL_PRIV_DATA_MAX_LEN) {
+ wil_err(wil, "invalid data len %d\n", priv_data.total_len);
+ return -EINVAL;
+ }
+
+ command = kmalloc(priv_data.total_len + 1, GFP_KERNEL);
+ if (!command)
+ return -ENOMEM;
+
+ if (copy_from_user(command, priv_data.buf, priv_data.total_len)) {
+ rc = -EFAULT;
+ goto out_free;
+ }
+
+ /* Make sure the command is NUL-terminated */
+ command[priv_data.total_len] = '\0';
+
+ wil_dbg_ioctl(wil, "ioc_android: command = %s\n", command);
+
+ /* P2P not supported, but WPS is (in AP mode).
+ * Ignore those in order not to block WPS functionality
+ * in non-P2P mode.
+ */
+ if (strncasecmp(command, CMD_SET_AP_WPS_P2P_IE,
+ strlen(CMD_SET_AP_WPS_P2P_IE)) == 0)
+ rc = 0;
+ else
+ rc = -ENOIOCTLCMD;
+
+out_free:
+ kfree(command);
+ return rc;
+}
+
+int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd)
+{
+ int ret;
+
+ ret = wil_pm_runtime_get(wil);
+ if (ret < 0)
+ return ret;
+
+ switch (cmd) {
+ case WIL_IOCTL_MEMIO:
+ ret = wil_ioc_memio_dword(wil, data);
+ break;
+ case WIL_IOCTL_MEMIO_BLOCK:
+ ret = wil_ioc_memio_block(wil, data);
+ break;
+ case (SIOCDEVPRIVATE + 1):
+ ret = wil_ioc_android(wil, data);
+ break;
+ default:
+ wil_dbg_ioctl(wil, "Unsupported IOCTL 0x%04x\n", cmd);
+ wil_pm_runtime_put(wil);
+ return -ENOIOCTLCMD;
+ }
+
+ wil_pm_runtime_put(wil);
+
+ wil_dbg_ioctl(wil, "ioctl(0x%04x) -> %d\n", cmd, ret);
+ return ret;
+}
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 59f041d..bbe5e0a 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -91,12 +91,20 @@ static int wil_stop(struct net_device *ndev)
return rc;
}
+static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
+{
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+
+ return wil_ioctl(wil, ifr->ifr_data, cmd);
+}
+
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = wil_do_ioctl,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index d8c78a0..f200171 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1380,6 +1380,7 @@ void wil_set_crypto_rx(u8 key_index, enum wmi_key_usage key_usage,
int wil_iftype_nl2wmi(enum nl80211_iftype type);
+int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd);
int wil_request_firmware(struct wil6210_priv *wil, const char *name,
bool load);
int wil_request_board(struct wil6210_priv *wil, const char *name);
diff --git a/include/uapi/linux/wil6210_uapi.h b/include/uapi/linux/wil6210_uapi.h
new file mode 100644
index 0000000..860bc7c
--- /dev/null
+++ b/include/uapi/linux/wil6210_uapi.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: ISC */
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __WIL6210_UAPI_H__
+#define __WIL6210_UAPI_H__
+
+#if !defined(__KERNEL__)
+#define __user
+#endif
+
+#include <linux/sockios.h>
+
+/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1
+ * are used by Android devices to implement PNO (preferred network offload).
+ * Albeit it is temporary solution, use different numbers to avoid conflicts
+ */
+
+/**
+ * Perform 32-bit I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ * struct wil_memio io;
+ * struct ifreq ifr = {
+ * .ifr_data = &io,
+ * };
+ */
+#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2)
+
+/**
+ * Perform block I/O operation to the card memory
+ *
+ * User code should arrange data in memory like this:
+ *
+ * void *buf;
+ * struct wil_memio_block io = {
+ * .block = buf,
+ * };
+ * struct ifreq ifr = {
+ * .ifr_data = &io,
+ * };
+ */
+#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3)
+
+/**
+ * operation to perform
+ *
+ * @wil_mmio_op_mask - bits defining operation,
+ * @wil_mmio_addr_mask - bits defining addressing mode
+ */
+enum wil_memio_op {
+ wil_mmio_read = 0,
+ wil_mmio_write = 1,
+ wil_mmio_op_mask = 0xff,
+ wil_mmio_addr_linker = 0 << 8,
+ wil_mmio_addr_ahb = 1 << 8,
+ wil_mmio_addr_bar = 2 << 8,
+ wil_mmio_addr_mask = 0xff00,
+};
+
+struct wil_memio {
+ uint32_t op; /* enum wil_memio_op */
+ uint32_t addr; /* should be 32-bit aligned */
+ uint32_t val;
+};
+
+struct wil_memio_block {
+ uint32_t op; /* enum wil_memio_op */
+ uint32_t addr; /* should be 32-bit aligned */
+ uint32_t size; /* should be multiple of 4 */
+ void __user *block; /* block address */
+};
+
+#endif /* __WIL6210_UAPI_H__ */
--
2.7.4
On 8/18/2019 4:15 PM, Alexei Avshalom Lazar wrote:
> Signed-off-by: Alexei Avshalom Lazar <[email protected]>
> ---
> drivers/net/wireless/ath/wil6210/Kconfig | 11 ++
> drivers/net/wireless/ath/wil6210/Makefile | 1 +
> drivers/net/wireless/ath/wil6210/ioctl.c | 245 +++++++++++++++++++++++++++++
> drivers/net/wireless/ath/wil6210/netdev.c | 8 +
> drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
> include/uapi/linux/wil6210_uapi.h | 77 +++++++++
> 6 files changed, 343 insertions(+)
> create mode 100644 drivers/net/wireless/ath/wil6210/ioctl.c
> create mode 100644 include/uapi/linux/wil6210_uapi.h
>
> diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
> index 0d1a8da..48b14de 100644
> --- a/drivers/net/wireless/ath/wil6210/Kconfig
> +++ b/drivers/net/wireless/ath/wil6210/Kconfig
> @@ -53,3 +53,14 @@ config WIL6210_DEBUGFS
> option if you are interested in debugging the driver.
>
> If unsure, say Y to make it easier to debug problems.
> +
> +config WIL6210_WRITE_IOCTL
> + bool "wil6210 write ioctl to the device"
> + depends on WIL6210
> + default y
> + help
> + Say Y here to allow write-access from user-space to
> + the device memory through ioctl. This is useful for
> + debugging purposes only.
> +
> + If unsure, say N.
I was about to scream in horror seeing this patch, but noticed you
rectified it in v8. *Phew*
Regards,
Arend