Subject: [PATCH] ath10k: Enable beacon loss detection support for 10.4

From: Mohammed Shafi Shajakhan <[email protected]>

Enable beacon loss detection support for 10.4 by handling
roam event. With this change QCA99X0 station is able to
detect beacon loss when the AP is powered off

Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 6279ab4..4dd35f1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5257,6 +5257,9 @@ static void ath10k_wmi_10_4_op_rx(struct ath10k *ar, struct sk_buff *skb)
case WMI_10_4_PEER_STA_KICKOUT_EVENTID:
ath10k_wmi_event_peer_sta_kickout(ar, skb);
break;
+ case WMI_10_4_ROAM_EVENTID:
+ ath10k_wmi_event_roam(ar, skb);
+ break;
case WMI_10_4_HOST_SWBA_EVENTID:
ath10k_wmi_event_host_swba(ar, skb);
break;
@@ -7903,6 +7906,7 @@ static const struct wmi_ops wmi_10_4_ops = {
.pull_phyerr = ath10k_wmi_10_4_op_pull_phyerr_ev,
.pull_svc_rdy = ath10k_wmi_main_op_pull_svc_rdy_ev,
.pull_rdy = ath10k_wmi_op_pull_rdy_ev,
+ .pull_roam_ev = ath10k_wmi_op_pull_roam_ev,
.get_txbf_conf_scheme = ath10k_wmi_10_4_txbf_conf_scheme,

.gen_pdev_suspend = ath10k_wmi_op_gen_pdev_suspend,
--
1.9.1



2016-06-30 11:00:43

by Kalle Valo

[permalink] [raw]
Subject: Re: ath10k: Enable beacon loss detection support for 10.4

Mohammed Shafi Shajakhan <[email protected]> wrote:
> From: Mohammed Shafi Shajakhan <[email protected]>
>
> Enable beacon loss detection support for 10.4 by handling
> roam event. With this change QCA99X0 station is able to
> detect beacon loss when the AP is powered off
>
> Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>

Thanks, 1 patch applied to ath-next branch of ath.git:

343bf960f03c ath10k: enable beacon loss detection support for 10.4

--
Sent by pwcli
https://patchwork.kernel.org/patch/9180777/