Benjamin Li ([email protected])

Number of posts: 58 (0.06 per day)
First post: 2020-12-29 01:42:32
Last post: 2023-06-27 18:03:02

Next Page
Date List Subject
2023-06-27 18:03:02 linux-kernel Re: [PATCH 02/11] arm64: dts: qcom: msm8939: Drop "qcom,idle-state-spc" compatible
2022-03-24 09:55:13 linux-wireless Re: [PATCH v3] wcn36xx: Implement tx_rate reporting
2022-03-17 06:34:15 linux-kernel [PATCH 0/2] thermal: thermal_of: pass-through change_mode & implement for tsens
2022-03-17 06:27:14 linux-kernel [PATCH 2/2] drivers: thermal: tsens: implement change_mode to disable sensor IRQs
2022-03-17 05:29:43 linux-kernel [PATCH 1/2] thermal: thermal_of: add pass-through change_mode to ops struct
2022-02-25 17:29:12 linux-kernel Re: [PATCH v3] drivers: thermal: tsens: respect thermal_device_mode in threshold irq reporting
2022-01-21 22:35:40 linux-kernel [PATCH v3] drivers: thermal: tsens: respect thermal_device_mode in threshold irq reporting
2022-01-21 22:34:08 linux-kernel Re: [PATCH v2] drivers: thermal: tsens: respect thermal_device_mode in threshold irq reporting
2022-01-14 03:17:38 linux-kernel [PATCH v2] drivers: thermal: tsens: respect thermal_device_mode in threshold irq reporting
2022-01-14 03:14:39 linux-kernel [PATCH] drivers: thermal: tsens: respect thermal_device_mode in threshold irq reporting
2021-11-04 01:07:34 linux-wireless [PATCH v3 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-04 01:06:58 linux-wireless [PATCH v3 1/2] wcn36xx: populate band before determining rate on RX
2021-11-04 01:06:49 linux-wireless [PATCH v3 0/2] wcn36xx: populate band before determining rate on RX
2021-11-04 01:06:12 linux-kernel [PATCH v3 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-04 01:06:00 linux-kernel [PATCH v3 1/2] wcn36xx: populate band before determining rate on RX
2021-11-04 01:05:55 linux-kernel [PATCH v3 0/2] wcn36xx: populate band before determining rate on RX
2021-11-03 17:02:35 linux-wireless Re: [PATCH v2 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-03 17:01:23 linux-kernel Re: [PATCH v2 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-03 15:57:08 linux-wireless [PATCH v2 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-03 15:56:33 linux-wireless [PATCH v2 0/2] wcn36xx: populate band before determining rate on RX
2021-11-03 15:56:33 linux-wireless [PATCH v2 1/2] wcn36xx: populate band before determining rate on RX
2021-11-03 15:56:14 linux-kernel [PATCH v2 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-11-03 15:56:08 linux-kernel [PATCH v2 1/2] wcn36xx: populate band before determining rate on RX
2021-11-03 15:56:03 linux-kernel [PATCH v2 0/2] wcn36xx: populate band before determining rate on RX
2021-11-03 15:06:02 linux-kernel Re: [kvalo-ath:pending 53/53] drivers/net/wireless/ath/wcn36xx/txrx.c:275:42: error: variable 'sband' set but not used
2021-10-29 00:41:38 linux-wireless Re: [PATCH 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-10-28 22:33:24 linux-wireless [PATCH 2/2] wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
2021-10-28 22:33:12 linux-wireless [PATCH 1/2] wcn36xx: populate band before determining rate on RX
2021-10-27 21:32:58 linux-wireless [PATCH v2 2/3] wcn36xx: implement flush op to speed up connected scan
2021-10-27 21:29:54 linux-wireless [PATCH v2 1/3] wcn36xx: add debug prints for sw_scan start/complete
2021-10-27 21:29:10 linux-wireless [PATCH v2 3/3] wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
2021-10-27 21:29:10 linux-wireless [PATCH v2 0/3] wcn36xx: software scanning improvements
2021-10-25 17:55:24 linux-wireless [PATCH v2 2/2] wcn36xx: add missing 5GHz channels 136 and 144
2021-10-25 17:55:16 linux-wireless [PATCH v2 1/2] wcn36xx: switch on antenna diversity feature bit
2021-10-25 17:54:52 linux-wireless [PATCH v2 0/2] wcn36xx: add missing 5GHz channels 136 and 144
2021-10-23 00:42:12 linux-kernel [PATCH 3/3] wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
2021-10-23 00:40:36 linux-wireless [PATCH 1/3] wcn36xx: add debug prints for sw_scan start/complete
2021-10-23 00:40:36 linux-wireless [PATCH 0/3] wcn36xx: software scanning improvements
2021-10-23 00:40:36 linux-wireless [PATCH 2/3] wcn36xx: implement flush op to speed up connected scan
2021-10-23 00:23:58 linux-kernel [PATCH] wcn36xx: add proper DMA memory barriers in rx path
2021-10-22 23:59:57 linux-kernel [PATCH 2/2] wcn36xx: add missing 5GHz channels 136 and 144
2021-10-22 23:58:48 linux-wireless [PATCH 1/2] wcn36xx: Switch on Antenna diversity feature bit
2021-10-22 23:58:39 linux-wireless [PATCH 0/2] wcn36xx: add missing 5GHz channels 136 and 144
2021-09-09 00:14:15 linux-wireless Re: [PATCH 1/2] wcn36xx: Fix Antenna Diversity Switching
2021-09-02 18:38:14 linux-wireless Re: [PATCH v2] wcn36xx: handle connection loss indication
2021-09-01 18:09:28 linux-wireless Re: [PATCH] wcn36xx: handle connection loss indication
2021-09-01 18:08:11 linux-wireless [PATCH v2] wcn36xx: handle connection loss indication
2021-09-01 03:07:09 linux-wireless [PATCH] wcn36xx: handle connection loss indication
2021-03-25 19:54:43 linux-wireless Re: [PATCH v3 00/12] wcn36xx: Enable downstream consistent Wake on Lan
2021-02-05 02:07:57 linux-kernel [PATCH v2 1/2] interconnect: qcom: icc-rpm: record slave RPM id in error log
2021-02-05 02:07:49 linux-kernel [PATCH v2 0/2] Clean up MSM8939 interconnect driver