The MAX31335 is an automotive qualified (AEC-Q100) real-time clock (RTC) driven
by an internal temperature compensated microelectromechanical systems (MEMS)
resonator. The oscillator provides a stable and accurate reference clock and
maintains the RTC to within ±2ppm accuracy from -40°C to +85°C, and within ±5ppm
up to +125°C.
NOTE:
Although the datasheet is not public yet, the driver can be made public (on
other linux custon trees it is already).
The driver was tested with actual hardware and works as expected.
Even though the datasheet is not available, if there are any queries about
the functionality of the part, these can be provided/inserted as code comments
inside the driver.
Antoniu Miclaus (2):
dt-bindings: rtc: max31335: add max31335 bindings
drivers: rtc: max31335: initial commit
.../devicetree/bindings/rtc/adi,max31335.yaml | 61 ++
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max31335.c | 759 ++++++++++++++++++
4 files changed, 832 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml
create mode 100644 drivers/rtc/rtc-max31335.c
--
2.42.0
Document the Analog Devices MAX31335 device tree bindings.
Signed-off-by: Antoniu Miclaus <[email protected]>
---
.../devicetree/bindings/rtc/adi,max31335.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml
diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
new file mode 100644
index 000000000000..b84be0fa34ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31335 RTC Device Tree Bindings
+
+allOf:
+ - $ref: rtc.yaml#
+
+maintainers:
+ - Antoniu Miclaus <[email protected]>
+
+description: Analog Devices MAX31335 I2C RTC
+
+properties:
+ compatible:
+ const: adi,max31335
+
+ reg:
+ description: I2C address of the RTC
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#clock-cells":
+ description:
+ RTC can be used as a clock source through its clock output pin.
+ const: 0
+
+ trickle-resistor-ohms:
+ description: Selected resistor for trickle charger.
+ enum: [3000, 6000, 11000]
+
+ trickle-diode-enable: true
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "adi,max31335";
+ reg = <0x68>;
+ pinctrl-0 = <&rtc_nint_pins>;
+ interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+ trickle-resistor-ohms = <6000>;
+ trickle-diode-enable;
+ };
+ };
+...
--
2.42.0
RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
Integrated MEMS Resonator.
Signed-off-by: Antoniu Miclaus <[email protected]>
---
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max31335.c | 759 +++++++++++++++++++++++++++++++++++++
3 files changed, 771 insertions(+)
create mode 100644 drivers/rtc/rtc-max31335.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index d7502433c78a..11c7d7fe1e85 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -373,6 +373,17 @@ config RTC_DRV_MAX8997
This driver can also be built as a module. If so, the module
will be called rtc-max8997.
+config RTC_DRV_MAX31335
+ tristate "Analog Devices MAX31335"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Analog Devices
+ MAX31335.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max31335.
+
config RTC_DRV_MAX77686
tristate "Maxim MAX77686"
depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index fd209883ee2e..99e683a48240 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
+obj-$(CONFIG_RTC_DRV_MAX31335) += rtc-max31335.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
diff --git a/drivers/rtc/rtc-max31335.c b/drivers/rtc/rtc-max31335.c
new file mode 100644
index 000000000000..159a019524b1
--- /dev/null
+++ b/drivers/rtc/rtc-max31335.c
@@ -0,0 +1,759 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the MAX31335
+ *
+ * Copyright (C) 2023 Analog Devices
+ *
+ * Antoniu Miclaus <[email protected]>
+ *
+ */
+
+#include <asm-generic/unaligned.h>
+#include <linux/bcd.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/util_macros.h>
+
+/* MAX31335 Register Map */
+#define MAX31335_STATUS1 0x00
+#define MAX31335_INT_EN1 0x01
+#define MAX31335_STATUS2 0x02
+#define MAX31335_INT_EN2 0x03
+#define MAX31335_RTC_RESET 0x04
+#define MAX31335_RTC_CONFIG 0x05
+#define MAX31335_RTC_CONFIG2 0x06
+#define MAX31335_TIMESTAMP_CONFIG 0x07
+#define MAX31335_TIMER_CONFIG 0x08
+#define MAX31335_SECONDS_1_128 0x09
+#define MAX31335_SECONDS 0x0A
+#define MAX31335_MINUTES 0x0B
+#define MAX31335_HOURS 0x0C
+#define MAX31335_DAY 0x0D
+#define MAX31335_DATE 0x0E
+#define MAX31335_MONTH 0x0F
+#define MAX31335_YEAR 0x0F
+#define MAX31335_ALM1_SEC 0x11
+#define MAX31335_ALM1_MIN 0x12
+#define MAX31335_ALM1_HRS 0x13
+#define MAX31335_ALM1_DAY_DATE 0x14
+#define MAX31335_ALM1_MON 0x15
+#define MAX31335_ALM1_YEAR 0x16
+#define MAX31335_ALM2_MIN 0x17
+#define MAX31335_ALM2_HRS 0x18
+#define MAX31335_ALM2_DAY_DATE 0x19
+#define MAX31335_TIMER_COUNT 0x1A
+#define MAX31335_TIMER_INIT 0x1B
+#define MAX31335_PWR_MGMT 0x1C
+#define MAX31335_TRICKLE_REG 0x1D
+#define MAX31335_AGING_OFFSET 0x1E
+#define MAX31335_TS_CONFIG 0x30
+#define MAX31335_TEMP_ALARM_HIGH_MSB 0x31
+#define MAX31335_TEMP_ALARM_HIGH_LSB 0x32
+#define MAX31335_TEMP_ALARM_LOW_MSB 0x33
+#define MAX31335_TEMP_ALARM_LOW_LSB 0x34
+#define MAX31335_TEMP_DATA_MSB 0x35
+#define MAX31335_TEMP_DATA_LSB 0x36
+#define MAX31335_TS0_SEC_1_128 0x40
+#define MAX31335_TS0_SEC 0x41
+#define MAX31335_TS0_MIN 0x42
+#define MAX31335_TS0_HOUR 0x43
+#define MAX31335_TS0_DATE 0x44
+#define MAX31335_TS0_MONTH 0x45
+#define MAX31335_TS0_YEAR 0x46
+#define MAX31335_TS0_FLAGS 0x47
+#define MAX31335_TS1_SEC_1_128 0x48
+#define MAX31335_TS1_SEC 0x49
+#define MAX31335_TS1_MIN 0x4A
+#define MAX31335_TS1_HOUR 0x4B
+#define MAX31335_TS1_DATE 0x4C
+#define MAX31335_TS1_MONTH 0x4D
+#define MAX31335_TS1_YEAR 0x4E
+#define MAX31335_TS1_FLAGS 0x4F
+#define MAX31335_TS2_SEC_1_128 0x50
+#define MAX31335_TS2_SEC 0x51
+#define MAX31335_TS2_MIN 0x52
+#define MAX31335_TS2_HOUR 0x53
+#define MAX31335_TS2_DATE 0x54
+#define MAX31335_TS2_MONTH 0x55
+#define MAX31335_TS2_YEAR 0x56
+#define MAX31335_TS2_FLAGS 0x57
+#define MAX31335_TS3_SEC_1_128 0x58
+#define MAX31335_TS3_SEC 0x59
+#define MAX31335_TS3_MIN 0x5A
+#define MAX31335_TS3_HOUR 0x5B
+#define MAX31335_TS3_DATE 0x5C
+#define MAX31335_TS3_MONTH 0x5D
+#define MAX31335_TS3_YEAR 0x5E
+#define MAX31335_TS3_FLAGS 0x5F
+
+/* MAX31335_STATUS1 Bit Definitions */
+#define MAX31335_STATUS1_PSDECT BIT(7)
+#define MAX31335_STATUS1_OSF BIT(6)
+#define MAX31335_STATUS1_PFAIL BIT(5)
+#define MAX31335_STATUS1_VBATLOW BIT(4)
+#define MAX31335_STATUS1_DIF BIT(3)
+#define MAX31335_STATUS1_TIF BIT(2)
+#define MAX31335_STATUS1_A2F BIT(1)
+#define MAX31335_STATUS1_A1F BIT(0)
+
+/* MAX31335_INT_EN1 Bit Definitions */
+#define MAX31335_INT_EN1_DOSF BIT(6)
+#define MAX31335_INT_EN1_PFAILE BIT(5)
+#define MAX31335_INT_EN1_VBATLOWE BIT(4)
+#define MAX31335_INT_EN1_DIE BIT(3)
+#define MAX31335_INT_EN1_TIE BIT(2)
+#define MAX31335_INT_EN1_A2IE BIT(1)
+#define MAX31335_INT_EN1_A1IE BIT(0)
+
+/* MAX31335_STATUS2 Bit Definitions */
+#define MAX31335_STATUS2_TEMP_RDY BIT(2)
+#define MAX31335_STATUS2_OTF BIT(1)
+#define MAX31335_STATUS2_UTF BIT(0)
+
+/* MAX31335_INT_EN2 Bit Definitions */
+#define MAX31335_INT_EN2_TEMP_RDY_EN BIT(2)
+#define MAX31335_INT_EN2_OTIE BIT(1)
+#define MAX31335_INT_EN2_UTIE BIT(0)
+
+/* MAX31335_RTC_RESET Bit Definitions */
+#define MAX31335_RTC_RESET_SWRST BIT(0)
+
+/* MAX31335_RTC_CONFIG1 Bit Definitions */
+#define MAX31335_RTC_CONFIG1_EN_IO BIT(6)
+#define MAX31335_RTC_CONFIG1_A1AC GENMASK(5, 4)
+#define MAX31335_RTC_CONFIG1_DIP BIT(3)
+#define MAX31335_RTC_CONFIG1_I2C_TIMEOUT BIT(1)
+#define MAX31335_RTC_CONFIG1_EN_OSC BIT(0)
+
+/* MAX31335_RTC_CONFIG2 Bit Definitions */
+#define MAX31335_RTC_CONFIG2_ENCLKO BIT(2)
+#define MAX31335_RTC_CONFIG2_CLKO_HZ GENMASK(1, 0)
+
+/* MAX31335_TIMESTAMP_CONFIG Bit Definitions */
+#define MAX31335_TIMESTAMP_CONFIG_TSVLOW BIT(5)
+#define MAX31335_TIMESTAMP_CONFIG_TSPWM BIT(4)
+#define MAX31335_TIMESTAMP_CONFIG_TSDIN BIT(3)
+#define MAX31335_TIMESTAMP_CONFIG_TSOW BIT(2)
+#define MAX31335_TIMESTAMP_CONFIG_TSR BIT(1)
+#define MAX31335_TIMESTAMP_CONFIG_TSE BIT(0)
+
+/* MAX31335_TIMER_CONFIG Bit Definitions */
+#define MAX31335_TIMER_CONFIG_TE BIT(4)
+#define MAX31335_TIMER_CONFIG_TPAUSE BIT(3)
+#define MAX31335_TIMER_CONFIG_TRPT BIT(2)
+#define MAX31335_TIMER_CONFIG_TFS GENMASK(1, 0)
+
+/* MAX31335_HOURS Bit Definitions */
+#define MAX31335_HOURS_F_24_12 BIT(6)
+#define MAX31335_HOURS_HR_20_AM_PM BIT(5)
+
+/* MAX31335_MONTH Bit Definitions */
+#define MAX31335_MONTH_CENTURY BIT(7)
+
+/* MAX31335_PWR_MGMT Bit Definitions */
+#define MAX31335_PWR_MGMT_PFVT BIT(0)
+
+/* MAX31335_TRICKLE_REG Bit Definitions */
+#define MAX31335_TRICKLE_REG_TRICKLE GENMASK(3, 1)
+#define MAX31335_TRICKLE_REG_EN_TRICKLE BIT(0)
+
+/* MAX31335_TS_CONFIG Bit Definitions */
+#define MAX31335_TS_CONFIG_AUTO BIT(4)
+#define MAX31335_TS_CONFIG_CONVERT_T BIT(3)
+#define MAX31335_TS_CONFIG_TSINT GENMASK(2, 0)
+
+/* MAX31335_TS_FLAGS Bit Definitions */
+#define MAX31335_TS_FLAGS_VLOWF BIT(3)
+#define MAX31335_TS_FLAGS_VBATF BIT(2)
+#define MAX31335_TS_FLAGS_VCCF BIT(1)
+#define MAX31335_TS_FLAGS_DINF BIT(0)
+
+/* MAX31335 Miscellaneous Definitions */
+#define MAX31335_STATUS1_DEFAULT 0x40
+#define MAX31335_RAM_SIZE 32
+#define MAX31335_TIME_SIZE 0x07
+
+#define clk_hw_to_max31335(_hw) container_of(_hw, struct max31335_data, clkout)
+
+struct max31335_data {
+ struct regmap *regmap;
+ struct rtc_device *rtc;
+ struct clk_hw clkout;
+};
+
+static const int max31335_clkout_freq[] = { 1, 64, 1024, 32768 };
+
+static const u16 max31335_trickle_resistors[] = {3000, 6000, 11000};
+
+static bool max31335_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /* time keeping registers */
+ if (reg >= MAX31335_SECONDS &&
+ reg < MAX31335_SECONDS + MAX31335_TIME_SIZE)
+ return true;
+
+ /* interrupt status register */
+ if (reg == MAX31335_INT_EN1_A1IE)
+ return true;
+
+ /* temperature registers */
+ if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
+ return true;
+}
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x5F,
+ .volatile_reg = max31335_volatile_reg,
+};
+
+static int max31335_get_hour(u8 hour_reg)
+{
+ int hour;
+
+ /* 24Hr mode */
+ if (!FIELD_GET(MAX31335_HOURS_F_24_12, hour_reg))
+ return bcd2bin(hour_reg & 0x3f);
+
+ /* 12Hr mode */
+ hour = bcd2bin(hour_reg & 0x1f);
+ if (hour == 12)
+ hour = 0;
+
+ if (FIELD_GET(MAX31335_HOURS_HR_20_AM_PM, hour_reg))
+ hour += 12;
+
+ return hour;
+}
+
+static int max31335_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ u8 date[7];
+ int ret;
+
+ ret = regmap_bulk_read(max31335->regmap, MAX31335_SECONDS, date,
+ sizeof(date));
+ if (ret)
+ return ret;
+
+ tm->tm_sec = bcd2bin(date[0] & 0x7f);
+ tm->tm_min = bcd2bin(date[1] & 0x7f);
+ tm->tm_hour = max31335_get_hour(date[2]);
+ tm->tm_wday = bcd2bin(date[3] & 0x7) - 1;
+ tm->tm_mday = bcd2bin(date[4] & 0x3f);
+ tm->tm_mon = bcd2bin(date[5] & 0x1f) - 1;
+ tm->tm_year = bcd2bin(date[6]) + 100;
+
+ if (FIELD_GET(MAX31335_MONTH_CENTURY, date[5]))
+ tm->tm_year += 100;
+
+ return 0;
+}
+
+static int max31335_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ u8 date[7];
+
+ date[0] = bin2bcd(tm->tm_sec);
+ date[1] = bin2bcd(tm->tm_min);
+ date[2] = bin2bcd(tm->tm_hour);
+ date[3] = bin2bcd(tm->tm_wday + 1);
+ date[4] = bin2bcd(tm->tm_mday);
+ date[5] = bin2bcd(tm->tm_mon + 1);
+ date[6] = bin2bcd(tm->tm_year % 100);
+
+ if (tm->tm_year >= 200)
+ date[5] |= FIELD_PREP(MAX31335_MONTH_CENTURY, 1);
+
+ return regmap_bulk_write(max31335->regmap, MAX31335_SECONDS, date,
+ sizeof(date));
+}
+
+static int max31335_read_offset(struct device *dev, long *offset)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ u32 value;
+ int ret;
+
+ ret = regmap_read(max31335->regmap, MAX31335_AGING_OFFSET, &value);
+ if (ret)
+ return ret;
+
+ *offset = value;
+
+ return 0;
+}
+
+static int max31335_set_offset(struct device *dev, long offset)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+
+ return regmap_write(max31335->regmap, MAX31335_AGING_OFFSET, offset);
+}
+
+static int max31335_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ struct mutex *lock = &max31335->rtc->ops_lock;
+ int ret, ctrl, status;
+ struct rtc_time time;
+ u8 regs[6];
+
+ mutex_lock(lock);
+
+ ret = regmap_bulk_read(max31335->regmap, MAX31335_ALM1_SEC, regs,
+ sizeof(regs));
+ if (ret)
+ goto exit;
+
+ alrm->time.tm_sec = bcd2bin(regs[0] & 0x7f);
+ alrm->time.tm_min = bcd2bin(regs[1] & 0x7f);
+ alrm->time.tm_hour = bcd2bin(regs[2] & 0x3f);
+ alrm->time.tm_mday = bcd2bin(regs[3] & 0x3f);
+ alrm->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
+ alrm->time.tm_year = bcd2bin(regs[5]) + 100;
+
+ ret = max31335_read_time(dev, &time);
+ if (ret)
+ goto exit;
+
+ if (time.tm_year >= 200)
+ alrm->time.tm_year += 100;
+
+ ret = regmap_read(max31335->regmap, MAX31335_INT_EN1, &ctrl);
+ if (ret)
+ goto exit;
+
+ ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
+ if (ret)
+ goto exit;
+
+ alrm->enabled = FIELD_GET(MAX31335_INT_EN1_A1IE, ctrl);
+ alrm->pending = FIELD_GET(MAX31335_STATUS1_A1F, status);
+
+exit:
+ mutex_unlock(lock);
+
+ return ret;
+}
+
+static int max31335_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ struct mutex *lock = &max31335->rtc->ops_lock;
+ unsigned int reg;
+ u8 regs[6];
+ int ret;
+
+ regs[0] = bin2bcd(alrm->time.tm_sec);
+ regs[1] = bin2bcd(alrm->time.tm_min);
+ regs[2] = bin2bcd(alrm->time.tm_hour);
+ regs[3] = bin2bcd(alrm->time.tm_mday);
+ regs[4] = bin2bcd(alrm->time.tm_mon + 1);
+ regs[5] = bin2bcd(alrm->time.tm_year % 100);
+
+ mutex_lock(lock);
+
+ ret = regmap_bulk_write(max31335->regmap, MAX31335_ALM1_SEC,
+ regs, sizeof(regs));
+ if (ret)
+ goto exit;
+
+ reg = FIELD_PREP(MAX31335_INT_EN1_A1IE, alrm->enabled);
+ ret = regmap_update_bits(max31335->regmap, MAX31335_INT_EN1,
+ MAX31335_INT_EN1_A1IE, reg);
+ if (ret)
+ goto exit;
+
+ ret = regmap_update_bits(max31335->regmap, MAX31335_STATUS1,
+ MAX31335_STATUS1_A1F, 0);
+
+exit:
+ mutex_unlock(lock);
+
+ return ret;
+}
+
+static int max31335_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+
+ return regmap_update_bits(max31335->regmap, MAX31335_INT_EN1,
+ MAX31335_INT_EN1_A1IE, enabled);
+}
+
+static irqreturn_t max31335_handle_irq(int irq, void *dev_id)
+{
+ struct max31335_data *max31335 = dev_id;
+ struct mutex *lock = &max31335->rtc->ops_lock;
+ int ret, status;
+
+ mutex_lock(lock);
+
+ ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
+ if (ret)
+ goto exit;
+
+ if (FIELD_GET(MAX31335_STATUS1_A1F, status)) {
+ ret = regmap_update_bits(max31335->regmap, MAX31335_STATUS1,
+ MAX31335_STATUS1_A1F, 0);
+ if (ret)
+ goto exit;
+
+ rtc_update_irq(max31335->rtc, 1, RTC_AF | RTC_IRQF);
+ }
+
+exit:
+ mutex_unlock(lock);
+
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops max31335_rtc_ops = {
+ .read_time = max31335_read_time,
+ .set_time = max31335_set_time,
+ .read_offset = max31335_read_offset,
+ .set_offset = max31335_set_offset,
+ .read_alarm = max31335_read_alarm,
+ .set_alarm = max31335_set_alarm,
+ .alarm_irq_enable = max31335_alarm_irq_enable,
+};
+
+static int max31335_trickle_charger_setup(struct device *dev,
+ struct max31335_data *max31335)
+{
+ u32 ohms;
+ bool diode = false;
+ int i;
+
+ if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms))
+ return 0;
+
+ if (device_property_read_bool(dev, "trickle-diode-enable"))
+ diode = true;
+
+ for (i = 0; i < ARRAY_SIZE(max31335_trickle_resistors); i++)
+ if (ohms == max31335_trickle_resistors[i])
+ break;
+
+ if (i >= ARRAY_SIZE(max31335_trickle_resistors)) {
+ dev_err_probe(dev, -EINVAL, "invalid trickle resistor value\n");
+
+ return 0;
+ }
+
+ if (diode)
+ i = i + 4;
+ else
+ i = i + 1;
+
+ return regmap_write(max31335->regmap, MAX31335_TRICKLE_REG,
+ FIELD_PREP(MAX31335_TRICKLE_REG_TRICKLE, i) |
+ MAX31335_TRICKLE_REG_EN_TRICKLE);
+}
+
+static unsigned long max31335_clkout_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct max31335_data *max31335 = clk_hw_to_max31335(hw);
+ unsigned int freq_mask;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2, ®);
+ if (ret)
+ return 0;
+
+ freq_mask = __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
+
+ return max31335_clkout_freq[reg & freq_mask];
+}
+
+static long max31335_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ int index;
+
+ index = find_closest(rate, max31335_clkout_freq,
+ ARRAY_SIZE(max31335_clkout_freq));
+
+ return max31335_clkout_freq[index];
+}
+
+static int max31335_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct max31335_data *max31335 = clk_hw_to_max31335(hw);
+ unsigned int freq_mask;
+ int index;
+
+ index = find_closest(rate, max31335_clkout_freq,
+ ARRAY_SIZE(max31335_clkout_freq));
+ freq_mask = __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
+
+ return regmap_update_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
+ freq_mask, index);
+}
+
+static int max31335_clkout_enable(struct clk_hw *hw)
+{
+ struct max31335_data *max31335 = clk_hw_to_max31335(hw);
+
+ return regmap_set_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
+ MAX31335_RTC_CONFIG2_ENCLKO);
+}
+
+static void max31335_clkout_disable(struct clk_hw *hw)
+{
+ struct max31335_data *max31335 = clk_hw_to_max31335(hw);
+
+ regmap_clear_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
+ MAX31335_RTC_CONFIG2_ENCLKO);
+}
+
+static int max31335_clkout_is_enabled(struct clk_hw *hw)
+{
+ struct max31335_data *max31335 = clk_hw_to_max31335(hw);
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2, ®);
+ if (ret)
+ return ret;
+
+ return !!(reg & MAX31335_RTC_CONFIG2_ENCLKO);
+}
+
+static const struct clk_ops max31335_clkout_ops = {
+ .recalc_rate = max31335_clkout_recalc_rate,
+ .round_rate = max31335_clkout_round_rate,
+ .set_rate = max31335_clkout_set_rate,
+ .enable = max31335_clkout_enable,
+ .disable = max31335_clkout_disable,
+ .is_enabled = max31335_clkout_is_enabled,
+};
+
+struct clk_init_data max31335_clk_init = {
+ .name = "max31335-clkout",
+ .ops = &max31335_clkout_ops,
+};
+
+static int max31335_nvmem_reg_read(void *priv, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct max31335_data *max31335 = priv;
+ unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
+
+ return regmap_bulk_read(max31335->regmap, reg, val, bytes);
+}
+
+static int max31335_nvmem_reg_write(void *priv, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct max31335_data *max31335 = priv;
+ unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
+
+ return regmap_bulk_write(max31335->regmap, reg, val, bytes);
+}
+
+struct nvmem_config max31335_nvmem_cfg = {
+ .reg_read = max31335_nvmem_reg_read,
+ .reg_write = max31335_nvmem_reg_write,
+ .word_size = 8,
+ .size = MAX31335_RAM_SIZE,
+};
+
+static int max31335_read_temp(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ u8 reg[2];
+ s16 temp;
+ int ret;
+
+ if (type != hwmon_temp || attr != hwmon_temp_input)
+ return -EOPNOTSUPP;
+
+ ret = regmap_bulk_read(max31335->regmap, MAX31335_TEMP_DATA_MSB,
+ reg, 2);
+ if (ret)
+ return ret;
+
+ temp = get_unaligned_be16(reg);
+
+ *val = (temp / 64) * 250;
+
+ return 0;
+}
+
+static umode_t max31335_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_temp && attr == hwmon_temp_input)
+ return 0444;
+
+ return 0;
+}
+
+static const struct hwmon_channel_info *max31335_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops max31335_hwmon_ops = {
+ .is_visible = max31335_is_visible,
+ .read = max31335_read_temp,
+};
+
+static const struct hwmon_chip_info max31335_chip_info = {
+ .ops = &max31335_hwmon_ops,
+ .info = max31335_info,
+};
+
+static int max31335_clkout_register(struct device *dev)
+{
+ struct max31335_data *max31335 = dev_get_drvdata(dev);
+ int ret;
+
+ if (!device_property_present(dev, "#clock-cells"))
+ return 0;
+
+ max31335->clkout.init = &max31335_clk_init;
+
+ ret = devm_clk_hw_register(dev, &max31335->clkout);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot register clock\n");
+
+ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+ &max31335->clkout);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot add hw provider\n");
+
+ ret = clk_prepare_enable(max31335->clkout.clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot enable clkout\n");
+
+ return 0;
+}
+
+static int max31335_probe(struct i2c_client *client)
+{
+ struct max31335_data *max31335;
+ struct device *hwmon;
+ int ret, status;
+
+ max31335 = devm_kzalloc(&client->dev, sizeof(struct max31335_data),
+ GFP_KERNEL);
+ if (!max31335)
+ return -ENOMEM;
+
+ max31335->regmap = devm_regmap_init_i2c(client, ®map_config);
+ if (IS_ERR(max31335->regmap))
+ return PTR_ERR(max31335->regmap);
+
+ i2c_set_clientdata(client, max31335);
+
+ ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
+ if (ret)
+ return ret;
+
+ if (status != MAX31335_STATUS1_DEFAULT)
+ dev_err_probe(&client->dev, -EINVAL,
+ "Unable to read from device.\n");
+
+ max31335->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(max31335->rtc))
+ return PTR_ERR(max31335->rtc);
+
+ max31335->rtc->ops = &max31335_rtc_ops;
+ max31335->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ max31335->rtc->range_max = RTC_TIMESTAMP_END_2199;
+
+ ret = devm_rtc_register_device(max31335->rtc);
+ if (ret)
+ return ret;
+
+ ret = max31335_clkout_register(&client->dev);
+ if (ret)
+ return ret;
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, max31335_handle_irq,
+ IRQF_ONESHOT,
+ "max31335", max31335);
+ if (ret) {
+ dev_warn(&client->dev,
+ "unable to request IRQ, alarm max31335 disabled\n");
+ client->irq = 0;
+ }
+ }
+
+ if (!client->irq)
+ clear_bit(RTC_FEATURE_ALARM, max31335->rtc->features);
+
+ max31335_nvmem_cfg.priv = max31335;
+ ret = devm_rtc_nvmem_register(max31335->rtc, &max31335_nvmem_cfg);
+ if (ret)
+ dev_err_probe(&client->dev, ret, "cannot register rtc nvmem\n");
+
+ hwmon = devm_hwmon_device_register_with_info(&client->dev, client->name,
+ max31335,
+ &max31335_chip_info,
+ NULL);
+ if (IS_ERR(hwmon))
+ dev_err_probe(&client->dev, PTR_ERR(hwmon),
+ "cannot register hwmon device\n");
+
+ return max31335_trickle_charger_setup(&client->dev, max31335);
+}
+
+static const struct i2c_device_id max31335_id[] = {
+ { "max31335", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, max31335_id);
+
+static const struct of_device_id max31335_of_match[] = {
+ { .compatible = "adi,max31335" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, max31335_of_match);
+
+static struct i2c_driver max31335_driver = {
+ .driver = {
+ .name = "rtc-max31335",
+ .of_match_table = max31335_of_match,
+ },
+ .probe = max31335_probe,
+ .id_table = max31335_id,
+};
+module_i2c_driver(max31335_driver);
+
+MODULE_AUTHOR("Antoniu Miclaus <[email protected]>");
+MODULE_DESCRIPTION("MAX31335 RTC driver");
+MODULE_LICENSE("GPL");
--
2.42.0
On 30/10/2023 12:50, Antoniu Miclaus wrote:
> Document the Analog Devices MAX31335 device tree bindings.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
> .../devicetree/bindings/rtc/adi,max31335.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml
>
> diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> new file mode 100644
> index 000000000000..b84be0fa34ef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX31335 RTC Device Tree Bindings
It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.
Although I wonder why there is no error report from the bot.
Drop "Device Tree Bindings"
> +
> +allOf:
> + - $ref: rtc.yaml#
This goes after description. Several existing files have it in other
place, but if doing changes then well...
> +
> +maintainers:
> + - Antoniu Miclaus <[email protected]>
> +
> +description: Analog Devices MAX31335 I2C RTC
Drop or say something else than title.
> +
> +properties:
> + compatible:
> + const: adi,max31335
> +
> + reg:
> + description: I2C address of the RTC
Drop description, obvious.
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + "#clock-cells":
> + description:
> + RTC can be used as a clock source through its clock output pin.
> + const: 0
> +
> + trickle-resistor-ohms:
> + description: Selected resistor for trickle charger.
> + enum: [3000, 6000, 11000]
default? Or missing property has other meaning...
> +
> + trickle-diode-enable: true
Where is it defined? You added it as it was a common property, so where
is the one definition? Maybe you wanted to use other property from
rtc.yaml which is deprecated, so obviously not...
> +
> +required:
> + - compatible
> + - reg
> +
Best regards,
Krzysztof
On 30/10/2023 12:50, Antoniu Miclaus wrote:
> RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
> Integrated MEMS Resonator.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.
There is no "drivers" prefix.
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max31335.c | 759 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 771 insertions(+)
> create mode 100644 drivers/rtc/rtc-max31335.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index d7502433c78a..11c7d7fe1e85 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -373,6 +373,17 @@ config RTC_DRV_MAX8997
> This driver can also be built as a module. If so, the module
> will be called rtc-max8997.
>
> +config RTC_DRV_MAX31335
> + tristate "Analog Devices MAX31335"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you get support for the Analog Devices
> + MAX31335.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max31335.
> +
...
> +
> +static int max31335_probe(struct i2c_client *client)
> +{
> + struct max31335_data *max31335;
> + struct device *hwmon;
> + int ret, status;
> +
> + max31335 = devm_kzalloc(&client->dev, sizeof(struct max31335_data),
sizeof(*)
> + GFP_KERNEL);
> + if (!max31335)
> + return -ENOMEM;
> +
Best regards,
Krzysztof
On 10/30/23 04:50, Antoniu Miclaus wrote:
> RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
> Integrated MEMS Resonator.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-max31335.c | 759 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 771 insertions(+)
> create mode 100644 drivers/rtc/rtc-max31335.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index d7502433c78a..11c7d7fe1e85 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -373,6 +373,17 @@ config RTC_DRV_MAX8997
> This driver can also be built as a module. If so, the module
> will be called rtc-max8997.
>
> +config RTC_DRV_MAX31335
> + tristate "Analog Devices MAX31335"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + If you say yes here you get support for the Analog Devices
> + MAX31335.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max31335.
> +
> config RTC_DRV_MAX77686
> tristate "Maxim MAX77686"
> depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index fd209883ee2e..99e683a48240 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -88,6 +88,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
> obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> +obj-$(CONFIG_RTC_DRV_MAX31335) += rtc-max31335.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> diff --git a/drivers/rtc/rtc-max31335.c b/drivers/rtc/rtc-max31335.c
> new file mode 100644
> index 000000000000..159a019524b1
> --- /dev/null
> +++ b/drivers/rtc/rtc-max31335.c
> @@ -0,0 +1,759 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RTC driver for the MAX31335
> + *
> + * Copyright (C) 2023 Analog Devices
> + *
> + * Antoniu Miclaus <[email protected]>
> + *
> + */
> +
> +#include <asm-generic/unaligned.h>
> +#include <linux/bcd.h>
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/util_macros.h>
> +
> +/* MAX31335 Register Map */
> +#define MAX31335_STATUS1 0x00
> +#define MAX31335_INT_EN1 0x01
> +#define MAX31335_STATUS2 0x02
> +#define MAX31335_INT_EN2 0x03
> +#define MAX31335_RTC_RESET 0x04
> +#define MAX31335_RTC_CONFIG 0x05
> +#define MAX31335_RTC_CONFIG2 0x06
> +#define MAX31335_TIMESTAMP_CONFIG 0x07
> +#define MAX31335_TIMER_CONFIG 0x08
> +#define MAX31335_SECONDS_1_128 0x09
> +#define MAX31335_SECONDS 0x0A
> +#define MAX31335_MINUTES 0x0B
> +#define MAX31335_HOURS 0x0C
> +#define MAX31335_DAY 0x0D
> +#define MAX31335_DATE 0x0E
> +#define MAX31335_MONTH 0x0F
> +#define MAX31335_YEAR 0x0F
> +#define MAX31335_ALM1_SEC 0x11
> +#define MAX31335_ALM1_MIN 0x12
> +#define MAX31335_ALM1_HRS 0x13
> +#define MAX31335_ALM1_DAY_DATE 0x14
> +#define MAX31335_ALM1_MON 0x15
> +#define MAX31335_ALM1_YEAR 0x16
> +#define MAX31335_ALM2_MIN 0x17
> +#define MAX31335_ALM2_HRS 0x18
> +#define MAX31335_ALM2_DAY_DATE 0x19
> +#define MAX31335_TIMER_COUNT 0x1A
> +#define MAX31335_TIMER_INIT 0x1B
> +#define MAX31335_PWR_MGMT 0x1C
> +#define MAX31335_TRICKLE_REG 0x1D
> +#define MAX31335_AGING_OFFSET 0x1E
> +#define MAX31335_TS_CONFIG 0x30
> +#define MAX31335_TEMP_ALARM_HIGH_MSB 0x31
> +#define MAX31335_TEMP_ALARM_HIGH_LSB 0x32
> +#define MAX31335_TEMP_ALARM_LOW_MSB 0x33
> +#define MAX31335_TEMP_ALARM_LOW_LSB 0x34
> +#define MAX31335_TEMP_DATA_MSB 0x35
> +#define MAX31335_TEMP_DATA_LSB 0x36
> +#define MAX31335_TS0_SEC_1_128 0x40
> +#define MAX31335_TS0_SEC 0x41
> +#define MAX31335_TS0_MIN 0x42
> +#define MAX31335_TS0_HOUR 0x43
> +#define MAX31335_TS0_DATE 0x44
> +#define MAX31335_TS0_MONTH 0x45
> +#define MAX31335_TS0_YEAR 0x46
> +#define MAX31335_TS0_FLAGS 0x47
> +#define MAX31335_TS1_SEC_1_128 0x48
> +#define MAX31335_TS1_SEC 0x49
> +#define MAX31335_TS1_MIN 0x4A
> +#define MAX31335_TS1_HOUR 0x4B
> +#define MAX31335_TS1_DATE 0x4C
> +#define MAX31335_TS1_MONTH 0x4D
> +#define MAX31335_TS1_YEAR 0x4E
> +#define MAX31335_TS1_FLAGS 0x4F
> +#define MAX31335_TS2_SEC_1_128 0x50
> +#define MAX31335_TS2_SEC 0x51
> +#define MAX31335_TS2_MIN 0x52
> +#define MAX31335_TS2_HOUR 0x53
> +#define MAX31335_TS2_DATE 0x54
> +#define MAX31335_TS2_MONTH 0x55
> +#define MAX31335_TS2_YEAR 0x56
> +#define MAX31335_TS2_FLAGS 0x57
> +#define MAX31335_TS3_SEC_1_128 0x58
> +#define MAX31335_TS3_SEC 0x59
> +#define MAX31335_TS3_MIN 0x5A
> +#define MAX31335_TS3_HOUR 0x5B
> +#define MAX31335_TS3_DATE 0x5C
> +#define MAX31335_TS3_MONTH 0x5D
> +#define MAX31335_TS3_YEAR 0x5E
> +#define MAX31335_TS3_FLAGS 0x5F
> +
> +/* MAX31335_STATUS1 Bit Definitions */
> +#define MAX31335_STATUS1_PSDECT BIT(7)
> +#define MAX31335_STATUS1_OSF BIT(6)
> +#define MAX31335_STATUS1_PFAIL BIT(5)
> +#define MAX31335_STATUS1_VBATLOW BIT(4)
> +#define MAX31335_STATUS1_DIF BIT(3)
> +#define MAX31335_STATUS1_TIF BIT(2)
> +#define MAX31335_STATUS1_A2F BIT(1)
> +#define MAX31335_STATUS1_A1F BIT(0)
> +
> +/* MAX31335_INT_EN1 Bit Definitions */
> +#define MAX31335_INT_EN1_DOSF BIT(6)
> +#define MAX31335_INT_EN1_PFAILE BIT(5)
> +#define MAX31335_INT_EN1_VBATLOWE BIT(4)
> +#define MAX31335_INT_EN1_DIE BIT(3)
> +#define MAX31335_INT_EN1_TIE BIT(2)
> +#define MAX31335_INT_EN1_A2IE BIT(1)
> +#define MAX31335_INT_EN1_A1IE BIT(0)
> +
> +/* MAX31335_STATUS2 Bit Definitions */
> +#define MAX31335_STATUS2_TEMP_RDY BIT(2)
> +#define MAX31335_STATUS2_OTF BIT(1)
> +#define MAX31335_STATUS2_UTF BIT(0)
> +
> +/* MAX31335_INT_EN2 Bit Definitions */
> +#define MAX31335_INT_EN2_TEMP_RDY_EN BIT(2)
> +#define MAX31335_INT_EN2_OTIE BIT(1)
> +#define MAX31335_INT_EN2_UTIE BIT(0)
> +
> +/* MAX31335_RTC_RESET Bit Definitions */
> +#define MAX31335_RTC_RESET_SWRST BIT(0)
> +
> +/* MAX31335_RTC_CONFIG1 Bit Definitions */
> +#define MAX31335_RTC_CONFIG1_EN_IO BIT(6)
> +#define MAX31335_RTC_CONFIG1_A1AC GENMASK(5, 4)
> +#define MAX31335_RTC_CONFIG1_DIP BIT(3)
> +#define MAX31335_RTC_CONFIG1_I2C_TIMEOUT BIT(1)
> +#define MAX31335_RTC_CONFIG1_EN_OSC BIT(0)
> +
> +/* MAX31335_RTC_CONFIG2 Bit Definitions */
> +#define MAX31335_RTC_CONFIG2_ENCLKO BIT(2)
> +#define MAX31335_RTC_CONFIG2_CLKO_HZ GENMASK(1, 0)
> +
> +/* MAX31335_TIMESTAMP_CONFIG Bit Definitions */
> +#define MAX31335_TIMESTAMP_CONFIG_TSVLOW BIT(5)
> +#define MAX31335_TIMESTAMP_CONFIG_TSPWM BIT(4)
> +#define MAX31335_TIMESTAMP_CONFIG_TSDIN BIT(3)
> +#define MAX31335_TIMESTAMP_CONFIG_TSOW BIT(2)
> +#define MAX31335_TIMESTAMP_CONFIG_TSR BIT(1)
> +#define MAX31335_TIMESTAMP_CONFIG_TSE BIT(0)
> +
> +/* MAX31335_TIMER_CONFIG Bit Definitions */
> +#define MAX31335_TIMER_CONFIG_TE BIT(4)
> +#define MAX31335_TIMER_CONFIG_TPAUSE BIT(3)
> +#define MAX31335_TIMER_CONFIG_TRPT BIT(2)
> +#define MAX31335_TIMER_CONFIG_TFS GENMASK(1, 0)
> +
> +/* MAX31335_HOURS Bit Definitions */
> +#define MAX31335_HOURS_F_24_12 BIT(6)
> +#define MAX31335_HOURS_HR_20_AM_PM BIT(5)
> +
> +/* MAX31335_MONTH Bit Definitions */
> +#define MAX31335_MONTH_CENTURY BIT(7)
> +
> +/* MAX31335_PWR_MGMT Bit Definitions */
> +#define MAX31335_PWR_MGMT_PFVT BIT(0)
> +
> +/* MAX31335_TRICKLE_REG Bit Definitions */
> +#define MAX31335_TRICKLE_REG_TRICKLE GENMASK(3, 1)
> +#define MAX31335_TRICKLE_REG_EN_TRICKLE BIT(0)
> +
> +/* MAX31335_TS_CONFIG Bit Definitions */
> +#define MAX31335_TS_CONFIG_AUTO BIT(4)
> +#define MAX31335_TS_CONFIG_CONVERT_T BIT(3)
> +#define MAX31335_TS_CONFIG_TSINT GENMASK(2, 0)
> +
> +/* MAX31335_TS_FLAGS Bit Definitions */
> +#define MAX31335_TS_FLAGS_VLOWF BIT(3)
> +#define MAX31335_TS_FLAGS_VBATF BIT(2)
> +#define MAX31335_TS_FLAGS_VCCF BIT(1)
> +#define MAX31335_TS_FLAGS_DINF BIT(0)
> +
> +/* MAX31335 Miscellaneous Definitions */
> +#define MAX31335_STATUS1_DEFAULT 0x40
> +#define MAX31335_RAM_SIZE 32
> +#define MAX31335_TIME_SIZE 0x07
> +
> +#define clk_hw_to_max31335(_hw) container_of(_hw, struct max31335_data, clkout)
> +
> +struct max31335_data {
> + struct regmap *regmap;
> + struct rtc_device *rtc;
> + struct clk_hw clkout;
> +};
> +
> +static const int max31335_clkout_freq[] = { 1, 64, 1024, 32768 };
> +
> +static const u16 max31335_trickle_resistors[] = {3000, 6000, 11000};
> +
> +static bool max31335_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + /* time keeping registers */
> + if (reg >= MAX31335_SECONDS &&
> + reg < MAX31335_SECONDS + MAX31335_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == MAX31335_INT_EN1_A1IE)
> + return true;
> +
> + /* temperature registers */
> + if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
> + return true;
> +}
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x5F,
> + .volatile_reg = max31335_volatile_reg,
> +};
> +
> +static int max31335_get_hour(u8 hour_reg)
> +{
> + int hour;
> +
> + /* 24Hr mode */
> + if (!FIELD_GET(MAX31335_HOURS_F_24_12, hour_reg))
> + return bcd2bin(hour_reg & 0x3f);
> +
> + /* 12Hr mode */
> + hour = bcd2bin(hour_reg & 0x1f);
> + if (hour == 12)
> + hour = 0;
> +
> + if (FIELD_GET(MAX31335_HOURS_HR_20_AM_PM, hour_reg))
> + hour += 12;
> +
> + return hour;
> +}
> +
> +static int max31335_read_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + u8 date[7];
> + int ret;
> +
> + ret = regmap_bulk_read(max31335->regmap, MAX31335_SECONDS, date,
> + sizeof(date));
> + if (ret)
> + return ret;
> +
> + tm->tm_sec = bcd2bin(date[0] & 0x7f);
> + tm->tm_min = bcd2bin(date[1] & 0x7f);
> + tm->tm_hour = max31335_get_hour(date[2]);
> + tm->tm_wday = bcd2bin(date[3] & 0x7) - 1;
> + tm->tm_mday = bcd2bin(date[4] & 0x3f);
> + tm->tm_mon = bcd2bin(date[5] & 0x1f) - 1;
> + tm->tm_year = bcd2bin(date[6]) + 100;
> +
> + if (FIELD_GET(MAX31335_MONTH_CENTURY, date[5]))
> + tm->tm_year += 100;
> +
> + return 0;
> +}
> +
> +static int max31335_set_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + u8 date[7];
> +
> + date[0] = bin2bcd(tm->tm_sec);
> + date[1] = bin2bcd(tm->tm_min);
> + date[2] = bin2bcd(tm->tm_hour);
> + date[3] = bin2bcd(tm->tm_wday + 1);
> + date[4] = bin2bcd(tm->tm_mday);
> + date[5] = bin2bcd(tm->tm_mon + 1);
> + date[6] = bin2bcd(tm->tm_year % 100);
> +
> + if (tm->tm_year >= 200)
> + date[5] |= FIELD_PREP(MAX31335_MONTH_CENTURY, 1);
> +
> + return regmap_bulk_write(max31335->regmap, MAX31335_SECONDS, date,
> + sizeof(date));
> +}
> +
> +static int max31335_read_offset(struct device *dev, long *offset)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + u32 value;
> + int ret;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_AGING_OFFSET, &value);
> + if (ret)
> + return ret;
> +
> + *offset = value;
> +
> + return 0;
> +}
> +
> +static int max31335_set_offset(struct device *dev, long offset)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> +
> + return regmap_write(max31335->regmap, MAX31335_AGING_OFFSET, offset);
> +}
> +
> +static int max31335_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + struct mutex *lock = &max31335->rtc->ops_lock;
> + int ret, ctrl, status;
> + struct rtc_time time;
> + u8 regs[6];
> +
> + mutex_lock(lock);
> +
> + ret = regmap_bulk_read(max31335->regmap, MAX31335_ALM1_SEC, regs,
> + sizeof(regs));
> + if (ret)
> + goto exit;
> +
> + alrm->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> + alrm->time.tm_min = bcd2bin(regs[1] & 0x7f);
> + alrm->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> + alrm->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> + alrm->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> + alrm->time.tm_year = bcd2bin(regs[5]) + 100;
> +
> + ret = max31335_read_time(dev, &time);
> + if (ret)
> + goto exit;
> +
> + if (time.tm_year >= 200)
> + alrm->time.tm_year += 100;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_INT_EN1, &ctrl);
> + if (ret)
> + goto exit;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
> + if (ret)
> + goto exit;
> +
> + alrm->enabled = FIELD_GET(MAX31335_INT_EN1_A1IE, ctrl);
> + alrm->pending = FIELD_GET(MAX31335_STATUS1_A1F, status);
> +
> +exit:
> + mutex_unlock(lock);
> +
> + return ret;
> +}
> +
> +static int max31335_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + struct mutex *lock = &max31335->rtc->ops_lock;
> + unsigned int reg;
> + u8 regs[6];
> + int ret;
> +
> + regs[0] = bin2bcd(alrm->time.tm_sec);
> + regs[1] = bin2bcd(alrm->time.tm_min);
> + regs[2] = bin2bcd(alrm->time.tm_hour);
> + regs[3] = bin2bcd(alrm->time.tm_mday);
> + regs[4] = bin2bcd(alrm->time.tm_mon + 1);
> + regs[5] = bin2bcd(alrm->time.tm_year % 100);
> +
> + mutex_lock(lock);
> +
> + ret = regmap_bulk_write(max31335->regmap, MAX31335_ALM1_SEC,
> + regs, sizeof(regs));
> + if (ret)
> + goto exit;
> +
> + reg = FIELD_PREP(MAX31335_INT_EN1_A1IE, alrm->enabled);
> + ret = regmap_update_bits(max31335->regmap, MAX31335_INT_EN1,
> + MAX31335_INT_EN1_A1IE, reg);
> + if (ret)
> + goto exit;
> +
> + ret = regmap_update_bits(max31335->regmap, MAX31335_STATUS1,
> + MAX31335_STATUS1_A1F, 0);
> +
> +exit:
> + mutex_unlock(lock);
> +
> + return ret;
> +}
> +
> +static int max31335_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> +
> + return regmap_update_bits(max31335->regmap, MAX31335_INT_EN1,
> + MAX31335_INT_EN1_A1IE, enabled);
> +}
> +
> +static irqreturn_t max31335_handle_irq(int irq, void *dev_id)
> +{
> + struct max31335_data *max31335 = dev_id;
> + struct mutex *lock = &max31335->rtc->ops_lock;
> + int ret, status;
> +
> + mutex_lock(lock);
> +
> + ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
> + if (ret)
> + goto exit;
> +
> + if (FIELD_GET(MAX31335_STATUS1_A1F, status)) {
> + ret = regmap_update_bits(max31335->regmap, MAX31335_STATUS1,
> + MAX31335_STATUS1_A1F, 0);
> + if (ret)
> + goto exit;
> +
> + rtc_update_irq(max31335->rtc, 1, RTC_AF | RTC_IRQF);
> + }
> +
> +exit:
> + mutex_unlock(lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct rtc_class_ops max31335_rtc_ops = {
> + .read_time = max31335_read_time,
> + .set_time = max31335_set_time,
> + .read_offset = max31335_read_offset,
> + .set_offset = max31335_set_offset,
> + .read_alarm = max31335_read_alarm,
> + .set_alarm = max31335_set_alarm,
> + .alarm_irq_enable = max31335_alarm_irq_enable,
> +};
> +
> +static int max31335_trickle_charger_setup(struct device *dev,
> + struct max31335_data *max31335)
> +{
> + u32 ohms;
> + bool diode = false;
> + int i;
> +
> + if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms))
> + return 0;
> +
> + if (device_property_read_bool(dev, "trickle-diode-enable"))
> + diode = true;
> +
diode = device_property_read_bool(dev, "trickle-diode-enable");
> + for (i = 0; i < ARRAY_SIZE(max31335_trickle_resistors); i++)
> + if (ohms == max31335_trickle_resistors[i])
> + break;
> +
> + if (i >= ARRAY_SIZE(max31335_trickle_resistors)) {
> + dev_err_probe(dev, -EINVAL, "invalid trickle resistor value\n");
> +
Should this return a hard error ? After all, it is a devicetree problem
resulting in a failure to enable trickle charging even though tricke
charging is requested.
> + return 0;
> + }
> +
> + if (diode)
> + i = i + 4;
> + else
> + i = i + 1;
> +
> + return regmap_write(max31335->regmap, MAX31335_TRICKLE_REG,
> + FIELD_PREP(MAX31335_TRICKLE_REG_TRICKLE, i) |
> + MAX31335_TRICKLE_REG_EN_TRICKLE);
> +}
> +
> +static unsigned long max31335_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> + unsigned int freq_mask;
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2, ®);
> + if (ret)
> + return 0;
> +
> + freq_mask = __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
> +
> + return max31335_clkout_freq[reg & freq_mask];
> +}
> +
> +static long max31335_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + int index;
> +
> + index = find_closest(rate, max31335_clkout_freq,
> + ARRAY_SIZE(max31335_clkout_freq));
> +
> + return max31335_clkout_freq[index];
> +}
> +
> +static int max31335_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> + unsigned int freq_mask;
> + int index;
> +
> + index = find_closest(rate, max31335_clkout_freq,
> + ARRAY_SIZE(max31335_clkout_freq));
> + freq_mask = __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
> +
> + return regmap_update_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
> + freq_mask, index);
> +}
> +
> +static int max31335_clkout_enable(struct clk_hw *hw)
> +{
> + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> +
> + return regmap_set_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
> + MAX31335_RTC_CONFIG2_ENCLKO);
> +}
> +
> +static void max31335_clkout_disable(struct clk_hw *hw)
> +{
> + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> +
> + regmap_clear_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
> + MAX31335_RTC_CONFIG2_ENCLKO);
> +}
> +
> +static int max31335_clkout_is_enabled(struct clk_hw *hw)
> +{
> + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> + unsigned int reg;
> + int ret;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2, ®);
> + if (ret)
> + return ret;
> +
> + return !!(reg & MAX31335_RTC_CONFIG2_ENCLKO);
> +}
> +
> +static const struct clk_ops max31335_clkout_ops = {
> + .recalc_rate = max31335_clkout_recalc_rate,
> + .round_rate = max31335_clkout_round_rate,
> + .set_rate = max31335_clkout_set_rate,
> + .enable = max31335_clkout_enable,
> + .disable = max31335_clkout_disable,
> + .is_enabled = max31335_clkout_is_enabled,
> +};
> +
> +struct clk_init_data max31335_clk_init = {
> + .name = "max31335-clkout",
> + .ops = &max31335_clkout_ops,
> +};
> +
> +static int max31335_nvmem_reg_read(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max31335_data *max31335 = priv;
> + unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
> +
> + return regmap_bulk_read(max31335->regmap, reg, val, bytes);
> +}
> +
> +static int max31335_nvmem_reg_write(void *priv, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct max31335_data *max31335 = priv;
> + unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
> +
> + return regmap_bulk_write(max31335->regmap, reg, val, bytes);
> +}
> +
> +struct nvmem_config max31335_nvmem_cfg = {
> + .reg_read = max31335_nvmem_reg_read,
> + .reg_write = max31335_nvmem_reg_write,
> + .word_size = 8,
> + .size = MAX31335_RAM_SIZE,
> +};
> +
> +static int max31335_read_temp(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + u8 reg[2];
> + s16 temp;
> + int ret;
> +
> + if (type != hwmon_temp || attr != hwmon_temp_input)
> + return -EOPNOTSUPP;
> +
> + ret = regmap_bulk_read(max31335->regmap, MAX31335_TEMP_DATA_MSB,
> + reg, 2);
> + if (ret)
> + return ret;
> +
> + temp = get_unaligned_be16(reg);
> +
> + *val = (temp / 64) * 250;
> +
> + return 0;
> +}
> +
> +static umode_t max31335_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + if (type == hwmon_temp && attr == hwmon_temp_input)
> + return 0444;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *max31335_info[] = {
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops max31335_hwmon_ops = {
> + .is_visible = max31335_is_visible,
> + .read = max31335_read_temp,
> +};
> +
> +static const struct hwmon_chip_info max31335_chip_info = {
> + .ops = &max31335_hwmon_ops,
> + .info = max31335_info,
> +};
> +
> +static int max31335_clkout_register(struct device *dev)
> +{
> + struct max31335_data *max31335 = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_property_present(dev, "#clock-cells"))
> + return 0;
> +
> + max31335->clkout.init = &max31335_clk_init;
> +
> + ret = devm_clk_hw_register(dev, &max31335->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot register clock\n");
> +
> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> + &max31335->clkout);
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot add hw provider\n");
> +
> + ret = clk_prepare_enable(max31335->clkout.clk);
Should this call devm_clk_get_enabled() ?
> + if (ret)
> + return dev_err_probe(dev, ret, "cannot enable clkout\n");
> +
> + return 0;
> +}
> +
> +static int max31335_probe(struct i2c_client *client)
> +{
> + struct max31335_data *max31335;
> + struct device *hwmon;
> + int ret, status;
> +
> + max31335 = devm_kzalloc(&client->dev, sizeof(struct max31335_data),
> + GFP_KERNEL);
> + if (!max31335)
> + return -ENOMEM;
> +
> + max31335->regmap = devm_regmap_init_i2c(client, ®map_config);
> + if (IS_ERR(max31335->regmap))
> + return PTR_ERR(max31335->regmap);
> +
> + i2c_set_clientdata(client, max31335);
> +
> + ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 1);
> + if (ret)
> + return ret;
> +
> + ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 0);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(max31335->regmap, MAX31335_STATUS1, &status);
> + if (ret)
> + return ret;
> +
> + if (status != MAX31335_STATUS1_DEFAULT)
> + dev_err_probe(&client->dev, -EINVAL,
> + "Unable to read from device.\n");
> +
That is misleading. The device returned an unexpected status.
I don't know if this really reflects a problem, but it is not
"Unable to read from device".
> + max31335->rtc = devm_rtc_allocate_device(&client->dev);
> + if (IS_ERR(max31335->rtc))
> + return PTR_ERR(max31335->rtc);
> +
> + max31335->rtc->ops = &max31335_rtc_ops;
> + max31335->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max31335->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + ret = devm_rtc_register_device(max31335->rtc);
> + if (ret)
> + return ret;
> +
> + ret = max31335_clkout_register(&client->dev);
> + if (ret)
> + return ret;
> +
> + if (client->irq > 0) {
> + ret = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, max31335_handle_irq,
> + IRQF_ONESHOT,
> + "max31335", max31335);
> + if (ret) {
> + dev_warn(&client->dev,
> + "unable to request IRQ, alarm max31335 disabled\n");
> + client->irq = 0;
> + }
> + }
> +
> + if (!client->irq)
> + clear_bit(RTC_FEATURE_ALARM, max31335->rtc->features);
> +
> + max31335_nvmem_cfg.priv = max31335;
> + ret = devm_rtc_nvmem_register(max31335->rtc, &max31335_nvmem_cfg);
> + if (ret)
> + dev_err_probe(&client->dev, ret, "cannot register rtc nvmem\n");
> +
> + hwmon = devm_hwmon_device_register_with_info(&client->dev, client->name,
> + max31335,
> + &max31335_chip_info,
> + NULL);
> + if (IS_ERR(hwmon))
> + dev_err_probe(&client->dev, PTR_ERR(hwmon),
> + "cannot register hwmon device\n");
> +
> + return max31335_trickle_charger_setup(&client->dev, max31335);
> +}
> +
> +static const struct i2c_device_id max31335_id[] = {
> + { "max31335", 0 },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, max31335_id);
> +
> +static const struct of_device_id max31335_of_match[] = {
> + { .compatible = "adi,max31335" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, max31335_of_match);
> +
> +static struct i2c_driver max31335_driver = {
> + .driver = {
> + .name = "rtc-max31335",
> + .of_match_table = max31335_of_match,
> + },
> + .probe = max31335_probe,
> + .id_table = max31335_id,
> +};
> +module_i2c_driver(max31335_driver);
> +
> +MODULE_AUTHOR("Antoniu Miclaus <[email protected]>");
> +MODULE_DESCRIPTION("MAX31335 RTC driver");
> +MODULE_LICENSE("GPL");
> On 30/10/2023 12:50, Antoniu Miclaus wrote:
> > Document the Analog Devices MAX31335 device tree bindings.
> >
> > Signed-off-by: Antoniu Miclaus <[email protected]>
> > ---
> > .../devicetree/bindings/rtc/adi,max31335.yaml | 61
> +++++++++++++++++++
> > 1 file changed, 61 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> > new file mode 100644
> > index 000000000000..b84be0fa34ef
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id:
> https://urldefense.com/v3/__http://devicetree.org/schemas/rtc/adi,max31
> 335.yaml*__;Iw!!A3Ni8CS0y2Y!8dEITWcTQ-
> eZ_KG0TRlZ9ghWuDPnZwR1oR5OpGyvJkmAOxsFxDYI7rUqR-
> U_KSQcGbkqxJ3glqBcJa_jjbukeVtyVSw-LCq3$
> > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-
> schemas/core.yaml*__;Iw!!A3Ni8CS0y2Y!8dEITWcTQ-
> eZ_KG0TRlZ9ghWuDPnZwR1oR5OpGyvJkmAOxsFxDYI7rUqR-
> U_KSQcGbkqxJ3glqBcJa_jjbukeVtyVRI7679n$
> > +
> > +title: Analog Devices MAX31335 RTC Device Tree Bindings
>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
Indeed I was using an older dtschema version locally and the dt_binding_check
was not throwing any errors. will address the comments in the next version.
> Although I wonder why there is no error report from the bot.
>
> Drop "Device Tree Bindings"
>
> > +
> > +allOf:
> > + - $ref: rtc.yaml#
>
> This goes after description. Several existing files have it in other
> place, but if doing changes then well...
>
> > +
> > +maintainers:
> > + - Antoniu Miclaus <[email protected]>
> > +
> > +description: Analog Devices MAX31335 I2C RTC
>
> Drop or say something else than title.
>
>
> > +
> > +properties:
> > + compatible:
> > + const: adi,max31335
> > +
> > + reg:
> > + description: I2C address of the RTC
>
> Drop description, obvious.
>
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + "#clock-cells":
> > + description:
> > + RTC can be used as a clock source through its clock output pin.
> > + const: 0
> > +
> > + trickle-resistor-ohms:
> > + description: Selected resistor for trickle charger.
> > + enum: [3000, 6000, 11000]
>
> default? Or missing property has other meaning...
>
> > +
> > + trickle-diode-enable: true
>
> Where is it defined? You added it as it was a common property, so where
> is the one definition? Maybe you wanted to use other property from
> rtc.yaml which is deprecated, so obviously not...
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
>
> Best regards,
> Krzysztof
--
Antoniu Miclăuş
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: Monday, October 30, 2023 7:25 PM
> To: Miclaus, Antoniu <[email protected]>; Alessandro Zummo
> <[email protected]>; Alexandre Belloni
> <[email protected]>; Rob Herring <[email protected]>;
> Krzysztof Kozlowski <[email protected]>; Conor Dooley
> <[email protected]>; Jean Delvare <[email protected]>; Guenter
> Roeck <[email protected]>; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]
> Subject: Re: [PATCH 1/2] dt-bindings: rtc: max31335: add max31335 bindings
>
> [External]
>
> On 30/10/2023 12:50, Antoniu Miclaus wrote:
> > Document the Analog Devices MAX31335 device tree bindings.
> >
> > Signed-off-by: Antoniu Miclaus <[email protected]>
> > ---
> > .../devicetree/bindings/rtc/adi,max31335.yaml | 61
> +++++++++++++++++++
> > 1 file changed, 61 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> > new file mode 100644
> > index 000000000000..b84be0fa34ef
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id:
> https://urldefense.com/v3/__http://devicetree.org/schemas/rtc/adi,max31
> 335.yaml*__;Iw!!A3Ni8CS0y2Y!8dEITWcTQ-
> eZ_KG0TRlZ9ghWuDPnZwR1oR5OpGyvJkmAOxsFxDYI7rUqR-
> U_KSQcGbkqxJ3glqBcJa_jjbukeVtyVSw-LCq3$
> > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-
> schemas/core.yaml*__;Iw!!A3Ni8CS0y2Y!8dEITWcTQ-
> eZ_KG0TRlZ9ghWuDPnZwR1oR5OpGyvJkmAOxsFxDYI7rUqR-
> U_KSQcGbkqxJ3glqBcJa_jjbukeVtyVRI7679n$
> > +
> > +title: Analog Devices MAX31335 RTC Device Tree Bindings
>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
>
> Although I wonder why there is no error report from the bot.
>
> Drop "Device Tree Bindings"
>
> > +
> > +allOf:
> > + - $ref: rtc.yaml#
>
> This goes after description. Several existing files have it in other
> place, but if doing changes then well...
>
> > +
> > +maintainers:
> > + - Antoniu Miclaus <[email protected]>
> > +
> > +description: Analog Devices MAX31335 I2C RTC
>
> Drop or say something else than title.
>
>
> > +
> > +properties:
> > + compatible:
> > + const: adi,max31335
> > +
> > + reg:
> > + description: I2C address of the RTC
>
> Drop description, obvious.
>
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + "#clock-cells":
> > + description:
> > + RTC can be used as a clock source through its clock output pin.
> > + const: 0
> > +
> > + trickle-resistor-ohms:
> > + description: Selected resistor for trickle charger.
> > + enum: [3000, 6000, 11000]
>
> default? Or missing property has other meaning...
If trickle-resistor-ohms property is missing, then the trickle charger setup is skipped.
>
> > +
> > + trickle-diode-enable: true
>
> Where is it defined? You added it as it was a common property, so where
> is the one definition? Maybe you wanted to use other property from
> rtc.yaml which is deprecated, so obviously not...
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
>
> Best regards,
> Krzysztof
> On 10/30/23 04:50, Antoniu Miclaus wrote:
> > RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
> > Integrated MEMS Resonator.
> >
> > Signed-off-by: Antoniu Miclaus <[email protected]>
> > ---
> > drivers/rtc/Kconfig | 11 +
> > drivers/rtc/Makefile | 1 +
> > drivers/rtc/rtc-max31335.c | 759
> +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 771 insertions(+)
> > create mode 100644 drivers/rtc/rtc-max31335.c
> >
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > index d7502433c78a..11c7d7fe1e85 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -373,6 +373,17 @@ config RTC_DRV_MAX8997
> > This driver can also be built as a module. If so, the module
> > will be called rtc-max8997.
> >
> > +config RTC_DRV_MAX31335
> > + tristate "Analog Devices MAX31335"
> > + depends on I2C
> > + select REGMAP_I2C
> > + help
> > + If you say yes here you get support for the Analog Devices
> > + MAX31335.
> > +
> > + This driver can also be built as a module. If so, the module
> > + will be called rtc-max31335.
> > +
> > config RTC_DRV_MAX77686
> > tristate "Maxim MAX77686"
> > depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714
> || COMPILE_TEST
> > diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> > index fd209883ee2e..99e683a48240 100644
> > --- a/drivers/rtc/Makefile
> > +++ b/drivers/rtc/Makefile
> > @@ -88,6 +88,7 @@ obj-$(CONFIG_RTC_DRV_M41T94) += rtc-
> m41t94.o
> > obj-$(CONFIG_RTC_DRV_M48T35) += rtc-m48t35.o
> > obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
> > obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> > +obj-$(CONFIG_RTC_DRV_MAX31335) += rtc-max31335.o
> > obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> > obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> > obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> > diff --git a/drivers/rtc/rtc-max31335.c b/drivers/rtc/rtc-max31335.c
> > new file mode 100644
> > index 000000000000..159a019524b1
> > --- /dev/null
> > +++ b/drivers/rtc/rtc-max31335.c
> > @@ -0,0 +1,759 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * RTC driver for the MAX31335
> > + *
> > + * Copyright (C) 2023 Analog Devices
> > + *
> > + * Antoniu Miclaus <[email protected]>
> > + *
> > + */
> > +
> > +#include <asm-generic/unaligned.h>
> > +#include <linux/bcd.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/bitops.h>
> > +#include <linux/clk.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/rtc.h>
> > +#include <linux/util_macros.h>
> > +
> > +/* MAX31335 Register Map */
> > +#define MAX31335_STATUS1 0x00
> > +#define MAX31335_INT_EN1 0x01
> > +#define MAX31335_STATUS2 0x02
> > +#define MAX31335_INT_EN2 0x03
> > +#define MAX31335_RTC_RESET 0x04
> > +#define MAX31335_RTC_CONFIG 0x05
> > +#define MAX31335_RTC_CONFIG2 0x06
> > +#define MAX31335_TIMESTAMP_CONFIG 0x07
> > +#define MAX31335_TIMER_CONFIG 0x08
> > +#define MAX31335_SECONDS_1_128 0x09
> > +#define MAX31335_SECONDS 0x0A
> > +#define MAX31335_MINUTES 0x0B
> > +#define MAX31335_HOURS 0x0C
> > +#define MAX31335_DAY 0x0D
> > +#define MAX31335_DATE 0x0E
> > +#define MAX31335_MONTH 0x0F
> > +#define MAX31335_YEAR 0x0F
> > +#define MAX31335_ALM1_SEC 0x11
> > +#define MAX31335_ALM1_MIN 0x12
> > +#define MAX31335_ALM1_HRS 0x13
> > +#define MAX31335_ALM1_DAY_DATE 0x14
> > +#define MAX31335_ALM1_MON 0x15
> > +#define MAX31335_ALM1_YEAR 0x16
> > +#define MAX31335_ALM2_MIN 0x17
> > +#define MAX31335_ALM2_HRS 0x18
> > +#define MAX31335_ALM2_DAY_DATE 0x19
> > +#define MAX31335_TIMER_COUNT 0x1A
> > +#define MAX31335_TIMER_INIT 0x1B
> > +#define MAX31335_PWR_MGMT 0x1C
> > +#define MAX31335_TRICKLE_REG 0x1D
> > +#define MAX31335_AGING_OFFSET 0x1E
> > +#define MAX31335_TS_CONFIG 0x30
> > +#define MAX31335_TEMP_ALARM_HIGH_MSB 0x31
> > +#define MAX31335_TEMP_ALARM_HIGH_LSB 0x32
> > +#define MAX31335_TEMP_ALARM_LOW_MSB 0x33
> > +#define MAX31335_TEMP_ALARM_LOW_LSB 0x34
> > +#define MAX31335_TEMP_DATA_MSB 0x35
> > +#define MAX31335_TEMP_DATA_LSB 0x36
> > +#define MAX31335_TS0_SEC_1_128 0x40
> > +#define MAX31335_TS0_SEC 0x41
> > +#define MAX31335_TS0_MIN 0x42
> > +#define MAX31335_TS0_HOUR 0x43
> > +#define MAX31335_TS0_DATE 0x44
> > +#define MAX31335_TS0_MONTH 0x45
> > +#define MAX31335_TS0_YEAR 0x46
> > +#define MAX31335_TS0_FLAGS 0x47
> > +#define MAX31335_TS1_SEC_1_128 0x48
> > +#define MAX31335_TS1_SEC 0x49
> > +#define MAX31335_TS1_MIN 0x4A
> > +#define MAX31335_TS1_HOUR 0x4B
> > +#define MAX31335_TS1_DATE 0x4C
> > +#define MAX31335_TS1_MONTH 0x4D
> > +#define MAX31335_TS1_YEAR 0x4E
> > +#define MAX31335_TS1_FLAGS 0x4F
> > +#define MAX31335_TS2_SEC_1_128 0x50
> > +#define MAX31335_TS2_SEC 0x51
> > +#define MAX31335_TS2_MIN 0x52
> > +#define MAX31335_TS2_HOUR 0x53
> > +#define MAX31335_TS2_DATE 0x54
> > +#define MAX31335_TS2_MONTH 0x55
> > +#define MAX31335_TS2_YEAR 0x56
> > +#define MAX31335_TS2_FLAGS 0x57
> > +#define MAX31335_TS3_SEC_1_128 0x58
> > +#define MAX31335_TS3_SEC 0x59
> > +#define MAX31335_TS3_MIN 0x5A
> > +#define MAX31335_TS3_HOUR 0x5B
> > +#define MAX31335_TS3_DATE 0x5C
> > +#define MAX31335_TS3_MONTH 0x5D
> > +#define MAX31335_TS3_YEAR 0x5E
> > +#define MAX31335_TS3_FLAGS 0x5F
> > +
> > +/* MAX31335_STATUS1 Bit Definitions */
> > +#define MAX31335_STATUS1_PSDECT BIT(7)
> > +#define MAX31335_STATUS1_OSF BIT(6)
> > +#define MAX31335_STATUS1_PFAIL BIT(5)
> > +#define MAX31335_STATUS1_VBATLOW BIT(4)
> > +#define MAX31335_STATUS1_DIF BIT(3)
> > +#define MAX31335_STATUS1_TIF BIT(2)
> > +#define MAX31335_STATUS1_A2F BIT(1)
> > +#define MAX31335_STATUS1_A1F BIT(0)
> > +
> > +/* MAX31335_INT_EN1 Bit Definitions */
> > +#define MAX31335_INT_EN1_DOSF BIT(6)
> > +#define MAX31335_INT_EN1_PFAILE BIT(5)
> > +#define MAX31335_INT_EN1_VBATLOWE BIT(4)
> > +#define MAX31335_INT_EN1_DIE BIT(3)
> > +#define MAX31335_INT_EN1_TIE BIT(2)
> > +#define MAX31335_INT_EN1_A2IE BIT(1)
> > +#define MAX31335_INT_EN1_A1IE BIT(0)
> > +
> > +/* MAX31335_STATUS2 Bit Definitions */
> > +#define MAX31335_STATUS2_TEMP_RDY BIT(2)
> > +#define MAX31335_STATUS2_OTF BIT(1)
> > +#define MAX31335_STATUS2_UTF BIT(0)
> > +
> > +/* MAX31335_INT_EN2 Bit Definitions */
> > +#define MAX31335_INT_EN2_TEMP_RDY_EN BIT(2)
> > +#define MAX31335_INT_EN2_OTIE BIT(1)
> > +#define MAX31335_INT_EN2_UTIE BIT(0)
> > +
> > +/* MAX31335_RTC_RESET Bit Definitions */
> > +#define MAX31335_RTC_RESET_SWRST BIT(0)
> > +
> > +/* MAX31335_RTC_CONFIG1 Bit Definitions */
> > +#define MAX31335_RTC_CONFIG1_EN_IO BIT(6)
> > +#define MAX31335_RTC_CONFIG1_A1AC GENMASK(5, 4)
> > +#define MAX31335_RTC_CONFIG1_DIP BIT(3)
> > +#define MAX31335_RTC_CONFIG1_I2C_TIMEOUT BIT(1)
> > +#define MAX31335_RTC_CONFIG1_EN_OSC BIT(0)
> > +
> > +/* MAX31335_RTC_CONFIG2 Bit Definitions */
> > +#define MAX31335_RTC_CONFIG2_ENCLKO BIT(2)
> > +#define MAX31335_RTC_CONFIG2_CLKO_HZ GENMASK(1,
> 0)
> > +
> > +/* MAX31335_TIMESTAMP_CONFIG Bit Definitions */
> > +#define MAX31335_TIMESTAMP_CONFIG_TSVLOW BIT(5)
> > +#define MAX31335_TIMESTAMP_CONFIG_TSPWM BIT(4)
> > +#define MAX31335_TIMESTAMP_CONFIG_TSDIN BIT(3)
> > +#define MAX31335_TIMESTAMP_CONFIG_TSOW BIT(2)
> > +#define MAX31335_TIMESTAMP_CONFIG_TSR BIT(1)
> > +#define MAX31335_TIMESTAMP_CONFIG_TSE BIT(0)
> > +
> > +/* MAX31335_TIMER_CONFIG Bit Definitions */
> > +#define MAX31335_TIMER_CONFIG_TE BIT(4)
> > +#define MAX31335_TIMER_CONFIG_TPAUSE BIT(3)
> > +#define MAX31335_TIMER_CONFIG_TRPT BIT(2)
> > +#define MAX31335_TIMER_CONFIG_TFS GENMASK(1, 0)
> > +
> > +/* MAX31335_HOURS Bit Definitions */
> > +#define MAX31335_HOURS_F_24_12 BIT(6)
> > +#define MAX31335_HOURS_HR_20_AM_PM BIT(5)
> > +
> > +/* MAX31335_MONTH Bit Definitions */
> > +#define MAX31335_MONTH_CENTURY BIT(7)
> > +
> > +/* MAX31335_PWR_MGMT Bit Definitions */
> > +#define MAX31335_PWR_MGMT_PFVT BIT(0)
> > +
> > +/* MAX31335_TRICKLE_REG Bit Definitions */
> > +#define MAX31335_TRICKLE_REG_TRICKLE GENMASK(3, 1)
> > +#define MAX31335_TRICKLE_REG_EN_TRICKLE BIT(0)
> > +
> > +/* MAX31335_TS_CONFIG Bit Definitions */
> > +#define MAX31335_TS_CONFIG_AUTO BIT(4)
> > +#define MAX31335_TS_CONFIG_CONVERT_T BIT(3)
> > +#define MAX31335_TS_CONFIG_TSINT GENMASK(2, 0)
> > +
> > +/* MAX31335_TS_FLAGS Bit Definitions */
> > +#define MAX31335_TS_FLAGS_VLOWF BIT(3)
> > +#define MAX31335_TS_FLAGS_VBATF BIT(2)
> > +#define MAX31335_TS_FLAGS_VCCF BIT(1)
> > +#define MAX31335_TS_FLAGS_DINF BIT(0)
> > +
> > +/* MAX31335 Miscellaneous Definitions */
> > +#define MAX31335_STATUS1_DEFAULT 0x40
> > +#define MAX31335_RAM_SIZE 32
> > +#define MAX31335_TIME_SIZE 0x07
> > +
> > +#define clk_hw_to_max31335(_hw) container_of(_hw, struct
> max31335_data, clkout)
> > +
> > +struct max31335_data {
> > + struct regmap *regmap;
> > + struct rtc_device *rtc;
> > + struct clk_hw clkout;
> > +};
> > +
> > +static const int max31335_clkout_freq[] = { 1, 64, 1024, 32768 };
> > +
> > +static const u16 max31335_trickle_resistors[] = {3000, 6000, 11000};
> > +
> > +static bool max31335_volatile_reg(struct device *dev, unsigned int reg)
> > +{
> > + /* time keeping registers */
> > + if (reg >= MAX31335_SECONDS &&
> > + reg < MAX31335_SECONDS + MAX31335_TIME_SIZE)
> > + return true;
> > +
> > + /* interrupt status register */
> > + if (reg == MAX31335_INT_EN1_A1IE)
> > + return true;
> > +
> > + /* temperature registers */
> > + if (reg == MAX31335_TEMP_DATA_MSB ||
> MAX31335_TEMP_DATA_LSB)
> > + return true;
> > +}
> > +
> > +static const struct regmap_config regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = 0x5F,
> > + .volatile_reg = max31335_volatile_reg,
> > +};
> > +
> > +static int max31335_get_hour(u8 hour_reg)
> > +{
> > + int hour;
> > +
> > + /* 24Hr mode */
> > + if (!FIELD_GET(MAX31335_HOURS_F_24_12, hour_reg))
> > + return bcd2bin(hour_reg & 0x3f);
> > +
> > + /* 12Hr mode */
> > + hour = bcd2bin(hour_reg & 0x1f);
> > + if (hour == 12)
> > + hour = 0;
> > +
> > + if (FIELD_GET(MAX31335_HOURS_HR_20_AM_PM, hour_reg))
> > + hour += 12;
> > +
> > + return hour;
> > +}
> > +
> > +static int max31335_read_time(struct device *dev, struct rtc_time *tm)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + u8 date[7];
> > + int ret;
> > +
> > + ret = regmap_bulk_read(max31335->regmap, MAX31335_SECONDS,
> date,
> > + sizeof(date));
> > + if (ret)
> > + return ret;
> > +
> > + tm->tm_sec = bcd2bin(date[0] & 0x7f);
> > + tm->tm_min = bcd2bin(date[1] & 0x7f);
> > + tm->tm_hour = max31335_get_hour(date[2]);
> > + tm->tm_wday = bcd2bin(date[3] & 0x7) - 1;
> > + tm->tm_mday = bcd2bin(date[4] & 0x3f);
> > + tm->tm_mon = bcd2bin(date[5] & 0x1f) - 1;
> > + tm->tm_year = bcd2bin(date[6]) + 100;
> > +
> > + if (FIELD_GET(MAX31335_MONTH_CENTURY, date[5]))
> > + tm->tm_year += 100;
> > +
> > + return 0;
> > +}
> > +
> > +static int max31335_set_time(struct device *dev, struct rtc_time *tm)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + u8 date[7];
> > +
> > + date[0] = bin2bcd(tm->tm_sec);
> > + date[1] = bin2bcd(tm->tm_min);
> > + date[2] = bin2bcd(tm->tm_hour);
> > + date[3] = bin2bcd(tm->tm_wday + 1);
> > + date[4] = bin2bcd(tm->tm_mday);
> > + date[5] = bin2bcd(tm->tm_mon + 1);
> > + date[6] = bin2bcd(tm->tm_year % 100);
> > +
> > + if (tm->tm_year >= 200)
> > + date[5] |= FIELD_PREP(MAX31335_MONTH_CENTURY, 1);
> > +
> > + return regmap_bulk_write(max31335->regmap,
> MAX31335_SECONDS, date,
> > + sizeof(date));
> > +}
> > +
> > +static int max31335_read_offset(struct device *dev, long *offset)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + u32 value;
> > + int ret;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_AGING_OFFSET,
> &value);
> > + if (ret)
> > + return ret;
> > +
> > + *offset = value;
> > +
> > + return 0;
> > +}
> > +
> > +static int max31335_set_offset(struct device *dev, long offset)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > +
> > + return regmap_write(max31335->regmap,
> MAX31335_AGING_OFFSET, offset);
> > +}
> > +
> > +static int max31335_read_alarm(struct device *dev, struct rtc_wkalrm
> *alrm)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + struct mutex *lock = &max31335->rtc->ops_lock;
> > + int ret, ctrl, status;
> > + struct rtc_time time;
> > + u8 regs[6];
> > +
> > + mutex_lock(lock);
> > +
> > + ret = regmap_bulk_read(max31335->regmap,
> MAX31335_ALM1_SEC, regs,
> > + sizeof(regs));
> > + if (ret)
> > + goto exit;
> > +
> > + alrm->time.tm_sec = bcd2bin(regs[0] & 0x7f);
> > + alrm->time.tm_min = bcd2bin(regs[1] & 0x7f);
> > + alrm->time.tm_hour = bcd2bin(regs[2] & 0x3f);
> > + alrm->time.tm_mday = bcd2bin(regs[3] & 0x3f);
> > + alrm->time.tm_mon = bcd2bin(regs[4] & 0x1f) - 1;
> > + alrm->time.tm_year = bcd2bin(regs[5]) + 100;
> > +
> > + ret = max31335_read_time(dev, &time);
> > + if (ret)
> > + goto exit;
> > +
> > + if (time.tm_year >= 200)
> > + alrm->time.tm_year += 100;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_INT_EN1, &ctrl);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_STATUS1,
> &status);
> > + if (ret)
> > + goto exit;
> > +
> > + alrm->enabled = FIELD_GET(MAX31335_INT_EN1_A1IE, ctrl);
> > + alrm->pending = FIELD_GET(MAX31335_STATUS1_A1F, status);
> > +
> > +exit:
> > + mutex_unlock(lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int max31335_set_alarm(struct device *dev, struct rtc_wkalrm
> *alrm)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + struct mutex *lock = &max31335->rtc->ops_lock;
> > + unsigned int reg;
> > + u8 regs[6];
> > + int ret;
> > +
> > + regs[0] = bin2bcd(alrm->time.tm_sec);
> > + regs[1] = bin2bcd(alrm->time.tm_min);
> > + regs[2] = bin2bcd(alrm->time.tm_hour);
> > + regs[3] = bin2bcd(alrm->time.tm_mday);
> > + regs[4] = bin2bcd(alrm->time.tm_mon + 1);
> > + regs[5] = bin2bcd(alrm->time.tm_year % 100);
> > +
> > + mutex_lock(lock);
> > +
> > + ret = regmap_bulk_write(max31335->regmap,
> MAX31335_ALM1_SEC,
> > + regs, sizeof(regs));
> > + if (ret)
> > + goto exit;
> > +
> > + reg = FIELD_PREP(MAX31335_INT_EN1_A1IE, alrm->enabled);
> > + ret = regmap_update_bits(max31335->regmap,
> MAX31335_INT_EN1,
> > + MAX31335_INT_EN1_A1IE, reg);
> > + if (ret)
> > + goto exit;
> > +
> > + ret = regmap_update_bits(max31335->regmap,
> MAX31335_STATUS1,
> > + MAX31335_STATUS1_A1F, 0);
> > +
> > +exit:
> > + mutex_unlock(lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int max31335_alarm_irq_enable(struct device *dev, unsigned int
> enabled)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > +
> > + return regmap_update_bits(max31335->regmap,
> MAX31335_INT_EN1,
> > + MAX31335_INT_EN1_A1IE, enabled);
> > +}
> > +
> > +static irqreturn_t max31335_handle_irq(int irq, void *dev_id)
> > +{
> > + struct max31335_data *max31335 = dev_id;
> > + struct mutex *lock = &max31335->rtc->ops_lock;
> > + int ret, status;
> > +
> > + mutex_lock(lock);
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_STATUS1,
> &status);
> > + if (ret)
> > + goto exit;
> > +
> > + if (FIELD_GET(MAX31335_STATUS1_A1F, status)) {
> > + ret = regmap_update_bits(max31335->regmap,
> MAX31335_STATUS1,
> > + MAX31335_STATUS1_A1F, 0);
> > + if (ret)
> > + goto exit;
> > +
> > + rtc_update_irq(max31335->rtc, 1, RTC_AF | RTC_IRQF);
> > + }
> > +
> > +exit:
> > + mutex_unlock(lock);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static const struct rtc_class_ops max31335_rtc_ops = {
> > + .read_time = max31335_read_time,
> > + .set_time = max31335_set_time,
> > + .read_offset = max31335_read_offset,
> > + .set_offset = max31335_set_offset,
> > + .read_alarm = max31335_read_alarm,
> > + .set_alarm = max31335_set_alarm,
> > + .alarm_irq_enable = max31335_alarm_irq_enable,
> > +};
> > +
> > +static int max31335_trickle_charger_setup(struct device *dev,
> > + struct max31335_data *max31335)
> > +{
> > + u32 ohms;
> > + bool diode = false;
> > + int i;
> > +
> > + if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms))
> > + return 0;
> > +
> > + if (device_property_read_bool(dev, "trickle-diode-enable"))
> > + diode = true;
> > +
>
> diode = device_property_read_bool(dev, "trickle-diode-enable");
>
> > + for (i = 0; i < ARRAY_SIZE(max31335_trickle_resistors); i++)
> > + if (ohms == max31335_trickle_resistors[i])
> > + break;
> > +
> > + if (i >= ARRAY_SIZE(max31335_trickle_resistors)) {
> > + dev_err_probe(dev, -EINVAL, "invalid trickle resistor
> value\n");
> > +
>
> Should this return a hard error ? After all, it is a devicetree problem
> resulting in a failure to enable trickle charging even though tricke
> charging is requested.
>
> > + return 0;
> > + }
> > +
> > + if (diode)
> > + i = i + 4;
> > + else
> > + i = i + 1;
> > +
> > + return regmap_write(max31335->regmap, MAX31335_TRICKLE_REG,
> > + FIELD_PREP(MAX31335_TRICKLE_REG_TRICKLE, i) |
> > + MAX31335_TRICKLE_REG_EN_TRICKLE);
> > +}
> > +
> > +static unsigned long max31335_clkout_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> > + unsigned int freq_mask;
> > + unsigned int reg;
> > + int ret;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2,
> ®);
> > + if (ret)
> > + return 0;
> > +
> > + freq_mask =
> __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
> > +
> > + return max31335_clkout_freq[reg & freq_mask];
> > +}
> > +
> > +static long max31335_clkout_round_rate(struct clk_hw *hw, unsigned
> long rate,
> > + unsigned long *prate)
> > +{
> > + int index;
> > +
> > + index = find_closest(rate, max31335_clkout_freq,
> > + ARRAY_SIZE(max31335_clkout_freq));
> > +
> > + return max31335_clkout_freq[index];
> > +}
> > +
> > +static int max31335_clkout_set_rate(struct clk_hw *hw, unsigned long
> rate,
> > + unsigned long parent_rate)
> > +{
> > + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> > + unsigned int freq_mask;
> > + int index;
> > +
> > + index = find_closest(rate, max31335_clkout_freq,
> > + ARRAY_SIZE(max31335_clkout_freq));
> > + freq_mask =
> __roundup_pow_of_two(ARRAY_SIZE(max31335_clkout_freq)) - 1;
> > +
> > + return regmap_update_bits(max31335->regmap,
> MAX31335_RTC_CONFIG2,
> > + freq_mask, index);
> > +}
> > +
> > +static int max31335_clkout_enable(struct clk_hw *hw)
> > +{
> > + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> > +
> > + return regmap_set_bits(max31335->regmap,
> MAX31335_RTC_CONFIG2,
> > + MAX31335_RTC_CONFIG2_ENCLKO);
> > +}
> > +
> > +static void max31335_clkout_disable(struct clk_hw *hw)
> > +{
> > + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> > +
> > + regmap_clear_bits(max31335->regmap, MAX31335_RTC_CONFIG2,
> > + MAX31335_RTC_CONFIG2_ENCLKO);
> > +}
> > +
> > +static int max31335_clkout_is_enabled(struct clk_hw *hw)
> > +{
> > + struct max31335_data *max31335 = clk_hw_to_max31335(hw);
> > + unsigned int reg;
> > + int ret;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_RTC_CONFIG2,
> ®);
> > + if (ret)
> > + return ret;
> > +
> > + return !!(reg & MAX31335_RTC_CONFIG2_ENCLKO);
> > +}
> > +
> > +static const struct clk_ops max31335_clkout_ops = {
> > + .recalc_rate = max31335_clkout_recalc_rate,
> > + .round_rate = max31335_clkout_round_rate,
> > + .set_rate = max31335_clkout_set_rate,
> > + .enable = max31335_clkout_enable,
> > + .disable = max31335_clkout_disable,
> > + .is_enabled = max31335_clkout_is_enabled,
> > +};
> > +
> > +struct clk_init_data max31335_clk_init = {
> > + .name = "max31335-clkout",
> > + .ops = &max31335_clkout_ops,
> > +};
> > +
> > +static int max31335_nvmem_reg_read(void *priv, unsigned int offset,
> > + void *val, size_t bytes)
> > +{
> > + struct max31335_data *max31335 = priv;
> > + unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
> > +
> > + return regmap_bulk_read(max31335->regmap, reg, val, bytes);
> > +}
> > +
> > +static int max31335_nvmem_reg_write(void *priv, unsigned int offset,
> > + void *val, size_t bytes)
> > +{
> > + struct max31335_data *max31335 = priv;
> > + unsigned int reg = MAX31335_TS0_SEC_1_128 + offset;
> > +
> > + return regmap_bulk_write(max31335->regmap, reg, val, bytes);
> > +}
> > +
> > +struct nvmem_config max31335_nvmem_cfg = {
> > + .reg_read = max31335_nvmem_reg_read,
> > + .reg_write = max31335_nvmem_reg_write,
> > + .word_size = 8,
> > + .size = MAX31335_RAM_SIZE,
> > +};
> > +
> > +static int max31335_read_temp(struct device *dev, enum
> hwmon_sensor_types type,
> > + u32 attr, int channel, long *val)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + u8 reg[2];
> > + s16 temp;
> > + int ret;
> > +
> > + if (type != hwmon_temp || attr != hwmon_temp_input)
> > + return -EOPNOTSUPP;
> > +
> > + ret = regmap_bulk_read(max31335->regmap,
> MAX31335_TEMP_DATA_MSB,
> > + reg, 2);
> > + if (ret)
> > + return ret;
> > +
> > + temp = get_unaligned_be16(reg);
> > +
> > + *val = (temp / 64) * 250;
> > +
> > + return 0;
> > +}
> > +
> > +static umode_t max31335_is_visible(const void *data,
> > + enum hwmon_sensor_types type,
> > + u32 attr, int channel)
> > +{
> > + if (type == hwmon_temp && attr == hwmon_temp_input)
> > + return 0444;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct hwmon_channel_info *max31335_info[] = {
> > + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
> > + NULL
> > +};
> > +
> > +static const struct hwmon_ops max31335_hwmon_ops = {
> > + .is_visible = max31335_is_visible,
> > + .read = max31335_read_temp,
> > +};
> > +
> > +static const struct hwmon_chip_info max31335_chip_info = {
> > + .ops = &max31335_hwmon_ops,
> > + .info = max31335_info,
> > +};
> > +
> > +static int max31335_clkout_register(struct device *dev)
> > +{
> > + struct max31335_data *max31335 = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + if (!device_property_present(dev, "#clock-cells"))
> > + return 0;
> > +
> > + max31335->clkout.init = &max31335_clk_init;
> > +
> > + ret = devm_clk_hw_register(dev, &max31335->clkout);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "cannot register clock\n");
> > +
> > + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > + &max31335->clkout);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "cannot add hw
> provider\n");
> > +
> > + ret = clk_prepare_enable(max31335->clkout.clk);
>
> Should this call devm_clk_get_enabled() ?
>
> > + if (ret)
> > + return dev_err_probe(dev, ret, "cannot enable clkout\n");
> > +
> > + return 0;
> > +}
> > +
> > +static int max31335_probe(struct i2c_client *client)
> > +{
> > + struct max31335_data *max31335;
> > + struct device *hwmon;
> > + int ret, status;
> > +
> > + max31335 = devm_kzalloc(&client->dev, sizeof(struct
> max31335_data),
> > + GFP_KERNEL);
> > + if (!max31335)
> > + return -ENOMEM;
> > +
> > + max31335->regmap = devm_regmap_init_i2c(client,
> ®map_config);
> > + if (IS_ERR(max31335->regmap))
> > + return PTR_ERR(max31335->regmap);
> > +
> > + i2c_set_clientdata(client, max31335);
> > +
> > + ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 1);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_write(max31335->regmap, MAX31335_RTC_RESET, 0);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_read(max31335->regmap, MAX31335_STATUS1,
> &status);
> > + if (ret)
> > + return ret;
> > +
> > + if (status != MAX31335_STATUS1_DEFAULT)
> > + dev_err_probe(&client->dev, -EINVAL,
> > + "Unable to read from device.\n");
> > +
>
> That is misleading. The device returned an unexpected status.
> I don't know if this really reflects a problem, but it is not
> "Unable to read from device".
>
Since the device lacks an ID register, I found this as a suitable
replacement for checking that the communication with the
device actually works before the probe function finishes
successfully.
I will be more specific in the dev_err_probe message in the
upcoming patch version.
>
> > + max31335->rtc = devm_rtc_allocate_device(&client->dev);
> > + if (IS_ERR(max31335->rtc))
> > + return PTR_ERR(max31335->rtc);
> > +
> > + max31335->rtc->ops = &max31335_rtc_ops;
> > + max31335->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> > + max31335->rtc->range_max = RTC_TIMESTAMP_END_2199;
> > +
> > + ret = devm_rtc_register_device(max31335->rtc);
> > + if (ret)
> > + return ret;
> > +
> > + ret = max31335_clkout_register(&client->dev);
> > + if (ret)
> > + return ret;
> > +
> > + if (client->irq > 0) {
> > + ret = devm_request_threaded_irq(&client->dev, client->irq,
> > + NULL, max31335_handle_irq,
> > + IRQF_ONESHOT,
> > + "max31335", max31335);
> > + if (ret) {
> > + dev_warn(&client->dev,
> > + "unable to request IRQ, alarm max31335
> disabled\n");
> > + client->irq = 0;
> > + }
> > + }
> > +
> > + if (!client->irq)
> > + clear_bit(RTC_FEATURE_ALARM, max31335->rtc->features);
> > +
> > + max31335_nvmem_cfg.priv = max31335;
> > + ret = devm_rtc_nvmem_register(max31335->rtc,
> &max31335_nvmem_cfg);
> > + if (ret)
> > + dev_err_probe(&client->dev, ret, "cannot register rtc
> nvmem\n");
> > +
> > + hwmon = devm_hwmon_device_register_with_info(&client->dev,
> client->name,
> > + max31335,
> > + &max31335_chip_info,
> > + NULL);
> > + if (IS_ERR(hwmon))
> > + dev_err_probe(&client->dev, PTR_ERR(hwmon),
> > + "cannot register hwmon device\n");
> > +
> > + return max31335_trickle_charger_setup(&client->dev, max31335);
> > +}
> > +
> > +static const struct i2c_device_id max31335_id[] = {
> > + { "max31335", 0 },
> > + { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, max31335_id);
> > +
> > +static const struct of_device_id max31335_of_match[] = {
> > + { .compatible = "adi,max31335" },
> > + { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, max31335_of_match);
> > +
> > +static struct i2c_driver max31335_driver = {
> > + .driver = {
> > + .name = "rtc-max31335",
> > + .of_match_table = max31335_of_match,
> > + },
> > + .probe = max31335_probe,
> > + .id_table = max31335_id,
> > +};
> > +module_i2c_driver(max31335_driver);
> > +
> > +MODULE_AUTHOR("Antoniu Miclaus <[email protected]>");
> > +MODULE_DESCRIPTION("MAX31335 RTC driver");
> > +MODULE_LICENSE("GPL");
Le 30/10/2023 à 12:50, Antoniu Miclaus a écrit :
> RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
> Integrated MEMS Resonator.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
...
> +static bool max31335_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + /* time keeping registers */
> + if (reg >= MAX31335_SECONDS &&
> + reg < MAX31335_SECONDS + MAX31335_TIME_SIZE)
> + return true;
> +
> + /* interrupt status register */
> + if (reg == MAX31335_INT_EN1_A1IE)
> + return true;
> +
> + /* temperature registers */
> + if (reg == MAX31335_TEMP_DATA_MSB || MAX31335_TEMP_DATA_LSB)
> + return true;
return false otherwise?
CJ
> +}
...
On Mon, 30 Oct 2023 13:50:01 +0200, Antoniu Miclaus wrote:
> Document the Analog Devices MAX31335 device tree bindings.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
> ---
> .../devicetree/bindings/rtc/adi,max31335.yaml | 61 +++++++++++++++++++
> 1 file changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/rtc/adi,max31335.yaml: title: 'Analog Devices MAX31335 RTC Device Tree Bindings' should not be valid under {'pattern': '([Bb]inding| [Ss]chema)'}
hint: Everything is a binding/schema, no need to say it. Describe what hardware the binding is for.
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/rtc/adi,max31335.yaml: trickle-diode-enable: missing type definition
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 31/10/2023 11:29, Miclaus, Antoniu wrote:
>>> + maxItems: 1
>>> +
>>> + interrupts:
>>> + maxItems: 1
>>> +
>>> + "#clock-cells":
>>> + description:
>>> + RTC can be used as a clock source through its clock output pin.
>>> + const: 0
>>> +
>>> + trickle-resistor-ohms:
>>> + description: Selected resistor for trickle charger.
>>> + enum: [3000, 6000, 11000]
>>
>> default? Or missing property has other meaning...
>
> If trickle-resistor-ohms property is missing, then the trickle charger setup is skipped.
Then mention this.
Best regards,
Krzysztof
On 31/10/2023 11:23:49+0000, Miclaus, Antoniu wrote:
> > > + if (status != MAX31335_STATUS1_DEFAULT)
> > > + dev_err_probe(&client->dev, -EINVAL,
> > > + "Unable to read from device.\n");
> > > +
> >
> > That is misleading. The device returned an unexpected status.
> > I don't know if this really reflects a problem, but it is not
> > "Unable to read from device".
> >
>
> Since the device lacks an ID register, I found this as a suitable
> replacement for checking that the communication with the
> device actually works before the probe function finishes
> successfully.
>
> I will be more specific in the dev_err_probe message in the
> upcoming patch version.
>
What if this is a transient bus error and the device is actually present
and working?
don't like this kind of check, they are not usually useful.
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On 10/31/23 04:23, Miclaus, Antoniu wrote:
[ ... ]
>>> + if (status != MAX31335_STATUS1_DEFAULT)
>>> + dev_err_probe(&client->dev, -EINVAL,
>>> + "Unable to read from device.\n");
>>> +
>>
>> That is misleading. The device returned an unexpected status.
>> I don't know if this really reflects a problem, but it is not
>> "Unable to read from device".
>>
>
> Since the device lacks an ID register, I found this as a suitable
> replacement for checking that the communication with the
> device actually works before the probe function finishes
> successfully.
>
But the register read was successful. Also, why would you want to not
instantiate the driver if the chip runs on VBAT, if the oscillator
is running, if VBAT is low, or if some interrupt is pending for
some reason ?
Guenter
> On 31/10/2023 11:23:49+0000, Miclaus, Antoniu wrote:
> > > > + if (status != MAX31335_STATUS1_DEFAULT)
> > > > + dev_err_probe(&client->dev, -EINVAL,
> > > > + "Unable to read from device.\n");
> > > > +
> > >
> > > That is misleading. The device returned an unexpected status.
> > > I don't know if this really reflects a problem, but it is not
> > > "Unable to read from device".
> > >
> >
> > Since the device lacks an ID register, I found this as a suitable
> > replacement for checking that the communication with the
> > device actually works before the probe function finishes
> > successfully.
> >
> > I will be more specific in the dev_err_probe message in the
> > upcoming patch version.
> >
>
> What if this is a transient bus error and the device is actually present
> and working?
> don't like this kind of check, they are not usually useful.
>
Got it. Will drop the check in the next patch version.
> --
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://urldefense.com/v3/__https://bootlin.com__;!!A3Ni8CS0y2Y!9HB62f
> 1sSispWlqUtpamRif0eXxFGCqLzQD3KSwVl9t97YNev9s6akJCbWJ71dcIettiLkqz
> xyFpR_e8H_tCWl82OcBdHjBG$
> On 31/10/2023 11:29, Miclaus, Antoniu wrote:
>
> >>> + maxItems: 1
> >>> +
> >>> + interrupts:
> >>> + maxItems: 1
> >>> +
> >>> + "#clock-cells":
> >>> + description:
> >>> + RTC can be used as a clock source through its clock output pin.
> >>> + const: 0
> >>> +
> >>> + trickle-resistor-ohms:
> >>> + description: Selected resistor for trickle charger.
> >>> + enum: [3000, 6000, 11000]
> >>
> >> default? Or missing property has other meaning...
> >
> > If trickle-resistor-ohms property is missing, then the trickle charger setup is
> skipped.
>
> Then mention this.
>
Will do in v3.
> Best regards,
> Krzysztof