2021-01-13 03:32:00

by Daniel Scally

[permalink] [raw]
Subject: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

A number of functions which are exported via EXPORT_SYMBOL_GPL() lack any
kernel-doc comments; add those in so all exported symbols are documented.

Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Daniel Scally <[email protected]>
---
Changes in version 2:
- Replaced "fwnode_handle" with either @fwnode or natural language
reference to a firmware node handle as appropriate.

drivers/base/swnode.c | 53 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)

diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index 4a4b2008fbc2..e98018aa8b2f 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -33,6 +33,13 @@ static struct kset *swnode_kset;

static const struct fwnode_operations software_node_ops;

+/**
+ * is_software_node() - check if given fwnode was created from a software_node
+ * @fwnode: The &struct fwnode_handle to check
+ *
+ * This function is used to check whether a given firmware node handle was
+ * created by registering a &struct software_node or not.
+ */
bool is_software_node(const struct fwnode_handle *fwnode)
{
return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &software_node_ops;
@@ -71,6 +78,14 @@ software_node_to_swnode(const struct software_node *node)
return swnode;
}

+/**
+ * to_software_node() - Fetch software node associated with a firmware node handle
+ * @fwnode: The pointer to a &struct fwnode_handle to parse
+ *
+ * This function attempts to fetch a pointer to the &struct software_node which
+ * was used to create the given @fwnode. Note that this will only work if the
+ * software node has **not** been released.
+ */
const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
{
const struct swnode *swnode = to_swnode(fwnode);
@@ -79,6 +94,14 @@ const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
}
EXPORT_SYMBOL_GPL(to_software_node);

+/**
+ * software_node_fwnode() - Fetch firmware node associated with a given software node
+ * @node: The pointer to a &struct software_node to parse
+ *
+ * This function attempts to fetch a pointer to the &struct fwnode_handle which
+ * was created from the given @node. Note that this will only work after the
+ * software node has been registered.
+ */
struct fwnode_handle *software_node_fwnode(const struct software_node *node)
{
struct swnode *swnode = software_node_to_swnode(node);
@@ -800,6 +823,27 @@ void software_node_unregister(const struct software_node *node)
}
EXPORT_SYMBOL_GPL(software_node_unregister);

+/**
+ * fwnode_create_software_node() - Create and register a new software_node
+ * @properties: NULL terminated array of properties to assign to the new node
+ * @parent: Pointer to a &struct fwnode_handle to assign as parent to the new
+ * node
+ *
+ * NOTE: The pointer passed to @parent **must** be to a firmware node handle
+ * that was created by registering a software node, meaning is_software_node()
+ * must return true when passed that pointer.
+ *
+ * This function creates a new instance of &struct software_node, assigns it a
+ * copy of the given array of properties and registers it as a new fwnode_handle.
+ * Freeing of the allocated memory when the fwnode_handle is no longer needed is
+ * handled via software_node_release() and does not need to be done separately.
+ *
+ * Returns:
+ * * fwnode_handle * - On success
+ * * -EINVAL - When @parent is not associated with a software_node
+ * * -ENOMEM - When memory allocation fails
+ * * -Other - Propagated errors from sub-functions
+ */
struct fwnode_handle *
fwnode_create_software_node(const struct property_entry *properties,
const struct fwnode_handle *parent)
@@ -832,6 +876,15 @@ fwnode_create_software_node(const struct property_entry *properties,
}
EXPORT_SYMBOL_GPL(fwnode_create_software_node);

+/**
+ * fwnode_remove_software_node() - Put a reference to a registered software_node
+ * @fwnode: The pointer to the &struct fwnode_handle you want to release
+ *
+ * Release a reference to a registered &struct software_node. This function
+ * differs from software_node_put() in that it takes no action if the
+ * firmware node handle passed to @fwnode turns out not to have been created by
+ * registering a software_node.
+ */
void fwnode_remove_software_node(struct fwnode_handle *fwnode)
{
struct swnode *swnode = to_swnode(fwnode);
--
2.25.1


2021-01-13 03:35:22

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

On 1/12/21 4:02 PM, Daniel Scally wrote:
> A number of functions which are exported via EXPORT_SYMBOL_GPL() lack any
> kernel-doc comments; add those in so all exported symbols are documented.
>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Heikki Krogerus <[email protected]>
> Signed-off-by: Daniel Scally <[email protected]>
> ---
> Changes in version 2:
> - Replaced "fwnode_handle" with either @fwnode or natural language
> reference to a firmware node handle as appropriate.
>
> drivers/base/swnode.c | 53 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
> index 4a4b2008fbc2..e98018aa8b2f 100644
> --- a/drivers/base/swnode.c
> +++ b/drivers/base/swnode.c
> @@ -33,6 +33,13 @@ static struct kset *swnode_kset;
>
> static const struct fwnode_operations software_node_ops;
>
> +/**
> + * is_software_node() - check if given fwnode was created from a software_node
> + * @fwnode: The &struct fwnode_handle to check
> + *
> + * This function is used to check whether a given firmware node handle was
> + * created by registering a &struct software_node or not.
> + */
> bool is_software_node(const struct fwnode_handle *fwnode)
> {
> return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &software_node_ops;
> @@ -71,6 +78,14 @@ software_node_to_swnode(const struct software_node *node)
> return swnode;
> }
>
> +/**
> + * to_software_node() - Fetch software node associated with a firmware node handle
> + * @fwnode: The pointer to a &struct fwnode_handle to parse
> + *
> + * This function attempts to fetch a pointer to the &struct software_node which
> + * was used to create the given @fwnode. Note that this will only work if the
> + * software node has **not** been released.
> + */
> const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
> {
> const struct swnode *swnode = to_swnode(fwnode);
> @@ -79,6 +94,14 @@ const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
> }
> EXPORT_SYMBOL_GPL(to_software_node);
>
> +/**
> + * software_node_fwnode() - Fetch firmware node associated with a given software node
> + * @node: The pointer to a &struct software_node to parse
> + *
> + * This function attempts to fetch a pointer to the &struct fwnode_handle which
> + * was created from the given @node. Note that this will only work after the
> + * software node has been registered.
> + */
> struct fwnode_handle *software_node_fwnode(const struct software_node *node)
> {
> struct swnode *swnode = software_node_to_swnode(node);
> @@ -800,6 +823,27 @@ void software_node_unregister(const struct software_node *node)
> }
> EXPORT_SYMBOL_GPL(software_node_unregister);
>
> +/**
> + * fwnode_create_software_node() - Create and register a new software_node
> + * @properties: NULL terminated array of properties to assign to the new node
> + * @parent: Pointer to a &struct fwnode_handle to assign as parent to the new
> + * node
> + *
> + * NOTE: The pointer passed to @parent **must** be to a firmware node handle

maybe: passed as @parent
?

Otherwise, LGTM. Thanks for doing this.

Reviewed-by: Randy Dunlap <[email protected]>


> + * that was created by registering a software node, meaning is_software_node()
> + * must return true when passed that pointer.
> + *
> + * This function creates a new instance of &struct software_node, assigns it a
> + * copy of the given array of properties and registers it as a new fwnode_handle.
> + * Freeing of the allocated memory when the fwnode_handle is no longer needed is
> + * handled via software_node_release() and does not need to be done separately.
> + *
> + * Returns:
> + * * fwnode_handle * - On success
> + * * -EINVAL - When @parent is not associated with a software_node
> + * * -ENOMEM - When memory allocation fails
> + * * -Other - Propagated errors from sub-functions
> + */
> struct fwnode_handle *
> fwnode_create_software_node(const struct property_entry *properties,
> const struct fwnode_handle *parent)
> @@ -832,6 +876,15 @@ fwnode_create_software_node(const struct property_entry *properties,
> }
> EXPORT_SYMBOL_GPL(fwnode_create_software_node);
>
> +/**
> + * fwnode_remove_software_node() - Put a reference to a registered software_node
> + * @fwnode: The pointer to the &struct fwnode_handle you want to release
> + *
> + * Release a reference to a registered &struct software_node. This function
> + * differs from software_node_put() in that it takes no action if the
> + * firmware node handle passed to @fwnode turns out not to have been created by
> + * registering a software_node.
> + */
> void fwnode_remove_software_node(struct fwnode_handle *fwnode)
> {
> struct swnode *swnode = to_swnode(fwnode);
>


--
~Randy
You can't do anything without having to do something else first.
-- Belefant's Law

2021-01-14 08:32:14

by Daniel Scally

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

Hi Randy

On 13/01/2021 01:01, Randy Dunlap wrote:
> On 1/12/21 4:02 PM, Daniel Scally wrote:
>> A number of functions which are exported via EXPORT_SYMBOL_GPL() lack any
>> kernel-doc comments; add those in so all exported symbols are documented.
>>
>> Reviewed-by: Andy Shevchenko <[email protected]>
>> Reviewed-by: Heikki Krogerus <[email protected]>
>> Signed-off-by: Daniel Scally <[email protected]>
>> ---
>> Changes in version 2:
>> - Replaced "fwnode_handle" with either @fwnode or natural language
>> reference to a firmware node handle as appropriate.
>>
>> drivers/base/swnode.c | 53 +++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>>
>> diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
>> index 4a4b2008fbc2..e98018aa8b2f 100644
>> --- a/drivers/base/swnode.c
>> +++ b/drivers/base/swnode.c
>> @@ -33,6 +33,13 @@ static struct kset *swnode_kset;
>>
>> static const struct fwnode_operations software_node_ops;
>>
>> +/**
>> + * is_software_node() - check if given fwnode was created from a software_node
>> + * @fwnode: The &struct fwnode_handle to check
>> + *
>> + * This function is used to check whether a given firmware node handle was
>> + * created by registering a &struct software_node or not.
>> + */
>> bool is_software_node(const struct fwnode_handle *fwnode)
>> {
>> return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &software_node_ops;
>> @@ -71,6 +78,14 @@ software_node_to_swnode(const struct software_node *node)
>> return swnode;
>> }
>>
>> +/**
>> + * to_software_node() - Fetch software node associated with a firmware node handle
>> + * @fwnode: The pointer to a &struct fwnode_handle to parse
>> + *
>> + * This function attempts to fetch a pointer to the &struct software_node which
>> + * was used to create the given @fwnode. Note that this will only work if the
>> + * software node has **not** been released.
>> + */
>> const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
>> {
>> const struct swnode *swnode = to_swnode(fwnode);
>> @@ -79,6 +94,14 @@ const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
>> }
>> EXPORT_SYMBOL_GPL(to_software_node);
>>
>> +/**
>> + * software_node_fwnode() - Fetch firmware node associated with a given software node
>> + * @node: The pointer to a &struct software_node to parse
>> + *
>> + * This function attempts to fetch a pointer to the &struct fwnode_handle which
>> + * was created from the given @node. Note that this will only work after the
>> + * software node has been registered.
>> + */
>> struct fwnode_handle *software_node_fwnode(const struct software_node *node)
>> {
>> struct swnode *swnode = software_node_to_swnode(node);
>> @@ -800,6 +823,27 @@ void software_node_unregister(const struct software_node *node)
>> }
>> EXPORT_SYMBOL_GPL(software_node_unregister);
>>
>> +/**
>> + * fwnode_create_software_node() - Create and register a new software_node
>> + * @properties: NULL terminated array of properties to assign to the new node
>> + * @parent: Pointer to a &struct fwnode_handle to assign as parent to the new
>> + * node
>> + *
>> + * NOTE: The pointer passed to @parent **must** be to a firmware node handle
> maybe: passed as @parent
> ?
Sure, I'll make that change.
> Otherwise, LGTM. Thanks for doing this.
>
> Reviewed-by: Randy Dunlap <[email protected]>
Thanks!
>
>> + * that was created by registering a software node, meaning is_software_node()
>> + * must return true when passed that pointer.
>> + *
>> + * This function creates a new instance of &struct software_node, assigns it a
>> + * copy of the given array of properties and registers it as a new fwnode_handle.
>> + * Freeing of the allocated memory when the fwnode_handle is no longer needed is
>> + * handled via software_node_release() and does not need to be done separately.
>> + *
>> + * Returns:
>> + * * fwnode_handle * - On success
>> + * * -EINVAL - When @parent is not associated with a software_node
>> + * * -ENOMEM - When memory allocation fails
>> + * * -Other - Propagated errors from sub-functions
>> + */
>> struct fwnode_handle *
>> fwnode_create_software_node(const struct property_entry *properties,
>> const struct fwnode_handle *parent)
>> @@ -832,6 +876,15 @@ fwnode_create_software_node(const struct property_entry *properties,
>> }
>> EXPORT_SYMBOL_GPL(fwnode_create_software_node);
>>
>> +/**
>> + * fwnode_remove_software_node() - Put a reference to a registered software_node
>> + * @fwnode: The pointer to the &struct fwnode_handle you want to release
>> + *
>> + * Release a reference to a registered &struct software_node. This function
>> + * differs from software_node_put() in that it takes no action if the
>> + * firmware node handle passed to @fwnode turns out not to have been created by
>> + * registering a software_node.
>> + */
>> void fwnode_remove_software_node(struct fwnode_handle *fwnode)
>> {
>> struct swnode *swnode = to_swnode(fwnode);
>>
>

2021-01-18 20:41:26

by Daniel Scally

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

On 18/01/2021 10:33, Andy Shevchenko wrote:
> On Mon, Jan 18, 2021 at 11:49:46AM +0200, Sakari Ailus wrote:
>> On Wed, Jan 13, 2021 at 12:02:09AM +0000, Daniel Scally wrote:
>>> + * to_software_node() - Fetch software node associated with a firmware node handle
>> Please wrap lines over 80 (unless there's a reason to keep them longer).
> Does kernel-doc behave good when you wrap the function summary line?
> My impression that summary should be one line.
>
Same, but I can shorten the line by s/associated with/linked to or
something along those lines

2021-01-18 20:45:13

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

On Mon, Jan 18, 2021 at 11:49:46AM +0200, Sakari Ailus wrote:
> On Wed, Jan 13, 2021 at 12:02:09AM +0000, Daniel Scally wrote:

> > + * to_software_node() - Fetch software node associated with a firmware node handle
>
> Please wrap lines over 80 (unless there's a reason to keep them longer).

Does kernel-doc behave good when you wrap the function summary line?
My impression that summary should be one line.

--
With Best Regards,
Andy Shevchenko


2021-01-19 02:58:45

by Sakari Ailus

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

Hi Daniel,

On Wed, Jan 13, 2021 at 12:02:09AM +0000, Daniel Scally wrote:
> A number of functions which are exported via EXPORT_SYMBOL_GPL() lack any
> kernel-doc comments; add those in so all exported symbols are documented.
>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Heikki Krogerus <[email protected]>
> Signed-off-by: Daniel Scally <[email protected]>
> ---
> Changes in version 2:
> - Replaced "fwnode_handle" with either @fwnode or natural language
> reference to a firmware node handle as appropriate.
>
> drivers/base/swnode.c | 53 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
> index 4a4b2008fbc2..e98018aa8b2f 100644
> --- a/drivers/base/swnode.c
> +++ b/drivers/base/swnode.c
> @@ -33,6 +33,13 @@ static struct kset *swnode_kset;
>
> static const struct fwnode_operations software_node_ops;
>
> +/**
> + * is_software_node() - check if given fwnode was created from a software_node
> + * @fwnode: The &struct fwnode_handle to check
> + *
> + * This function is used to check whether a given firmware node handle was
> + * created by registering a &struct software_node or not.
> + */
> bool is_software_node(const struct fwnode_handle *fwnode)
> {
> return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &software_node_ops;
> @@ -71,6 +78,14 @@ software_node_to_swnode(const struct software_node *node)
> return swnode;
> }
>
> +/**
> + * to_software_node() - Fetch software node associated with a firmware node handle

Please wrap lines over 80 (unless there's a reason to keep them longer).

Reviewed-by: Sakari Ailus <[email protected]>

> + * @fwnode: The pointer to a &struct fwnode_handle to parse
> + *
> + * This function attempts to fetch a pointer to the &struct software_node which
> + * was used to create the given @fwnode. Note that this will only work if the
> + * software node has **not** been released.
> + */
> const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
> {
> const struct swnode *swnode = to_swnode(fwnode);
> @@ -79,6 +94,14 @@ const struct software_node *to_software_node(const struct fwnode_handle *fwnode)
> }
> EXPORT_SYMBOL_GPL(to_software_node);
>
> +/**
> + * software_node_fwnode() - Fetch firmware node associated with a given software node
> + * @node: The pointer to a &struct software_node to parse
> + *
> + * This function attempts to fetch a pointer to the &struct fwnode_handle which
> + * was created from the given @node. Note that this will only work after the
> + * software node has been registered.
> + */
> struct fwnode_handle *software_node_fwnode(const struct software_node *node)
> {
> struct swnode *swnode = software_node_to_swnode(node);
> @@ -800,6 +823,27 @@ void software_node_unregister(const struct software_node *node)
> }
> EXPORT_SYMBOL_GPL(software_node_unregister);
>
> +/**
> + * fwnode_create_software_node() - Create and register a new software_node
> + * @properties: NULL terminated array of properties to assign to the new node
> + * @parent: Pointer to a &struct fwnode_handle to assign as parent to the new
> + * node
> + *
> + * NOTE: The pointer passed to @parent **must** be to a firmware node handle
> + * that was created by registering a software node, meaning is_software_node()
> + * must return true when passed that pointer.
> + *
> + * This function creates a new instance of &struct software_node, assigns it a
> + * copy of the given array of properties and registers it as a new fwnode_handle.
> + * Freeing of the allocated memory when the fwnode_handle is no longer needed is
> + * handled via software_node_release() and does not need to be done separately.
> + *
> + * Returns:
> + * * fwnode_handle * - On success
> + * * -EINVAL - When @parent is not associated with a software_node
> + * * -ENOMEM - When memory allocation fails
> + * * -Other - Propagated errors from sub-functions
> + */
> struct fwnode_handle *
> fwnode_create_software_node(const struct property_entry *properties,
> const struct fwnode_handle *parent)
> @@ -832,6 +876,15 @@ fwnode_create_software_node(const struct property_entry *properties,
> }
> EXPORT_SYMBOL_GPL(fwnode_create_software_node);
>
> +/**
> + * fwnode_remove_software_node() - Put a reference to a registered software_node
> + * @fwnode: The pointer to the &struct fwnode_handle you want to release
> + *
> + * Release a reference to a registered &struct software_node. This function
> + * differs from software_node_put() in that it takes no action if the
> + * firmware node handle passed to @fwnode turns out not to have been created by
> + * registering a software_node.
> + */
> void fwnode_remove_software_node(struct fwnode_handle *fwnode)
> {
> struct swnode *swnode = to_swnode(fwnode);
> --
> 2.25.1
>

--
Sakari Ailus

2021-01-19 05:19:07

by Sakari Ailus

[permalink] [raw]
Subject: Re: [PATCH v2] software_node: Add kernel-doc comments to exported symbols

On Mon, Jan 18, 2021 at 12:33:55PM +0200, Andy Shevchenko wrote:
> On Mon, Jan 18, 2021 at 11:49:46AM +0200, Sakari Ailus wrote:
> > On Wed, Jan 13, 2021 at 12:02:09AM +0000, Daniel Scally wrote:
>
> > > + * to_software_node() - Fetch software node associated with a firmware node handle
> >
> > Please wrap lines over 80 (unless there's a reason to keep them longer).
>
> Does kernel-doc behave good when you wrap the function summary line?

It does, it's not uncommon to have it split across over multiple lines.

--
Sakari Ailus