This series add OF bindings and code support for the interrupt
controllers, clocks and GPIOs. However it was only tested on a
TL-WR1043ND with an AR9132, others SoCs are untested, and a few are
not supported at all.
Most code changes base on the previous bug fix series:
[PATCH v2 0/5] MIPS: ath79: Various small fix to prepare OF support
The requested patch to move the GPIO driver to drivers/gpio is ready and
will follow once it is clearer if this serie get merged.
ChangeLog:
v2: * Fixed the OF bindings and DTS to use ePAPR standardized names
* Fixed the typos in the OF bindings
* Added an ngpios property to the GPIO binding and driver
* Removed all the soc_is_xxx() calls out of the GPIO driver probe()
* Updated the DTS patches to the new directory structure and merged both
in one. Having 3 patches to add Makefile, SoC dtsi and board DTS seemed
a bit overkill.
* Moved the patch to use the common clk API to the bug fix serie to keep
this one cleaner.
Alban Bedel (12):
devicetree: Add bindings for the SoC of the ATH79 familly
MIPS: ath79: Add basic device tree support
devicetree: Add bindings for the ATH79 DDR controllers
devicetree: Add bindings for the ATH79 interrupt controllers
devicetree: Add bindings for the ATH79 MISC interrupt controllers
MIPS: ath79: Add OF support to the IRQ controllers
devicetree: Add bindings for the ATH79 PLL controllers
MIPS: ath79: Add OF support to the clocks
devicetree: Add bindings for the ATH79 GPIO controllers
MIPS: ath79: Add OF support to the GPIO driver
of: Add vendor prefix for TP-Link Technologies Co. Ltd
MIPS: Add basic support for the TL-WR1043ND version 1
.../devicetree/bindings/clock/qca,ath79-pll.txt | 33 ++++++
.../devicetree/bindings/gpio/gpio-ath79.txt | 38 +++++++
.../interrupt-controller/qca,ath79-cpu-intc.txt | 44 ++++++++
.../interrupt-controller/qca,ath79-misc-intc.txt | 30 +++++
.../memory-controllers/ath79-ddr-controller.txt | 35 ++++++
.../devicetree/bindings/mips/ath79-soc.txt | 21 ++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/mips/Kconfig | 1 +
arch/mips/ath79/Kconfig | 15 +++
arch/mips/ath79/clock.c | 63 +++++++----
arch/mips/ath79/dev-common.c | 51 +++++++++
arch/mips/ath79/gpio.c | 79 ++++++++++----
arch/mips/ath79/irq.c | 87 ++++++++++++++-
arch/mips/ath79/machtypes.h | 1 +
arch/mips/ath79/setup.c | 27 ++++-
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/qca/Makefile | 9 ++
arch/mips/boot/dts/qca/ar9132.dtsi | 121 +++++++++++++++++++++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 83 ++++++++++++++
include/linux/platform_data/gpio-ath79.h | 19 ++++
20 files changed, 716 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
create mode 100644 Documentation/devicetree/bindings/mips/ath79-soc.txt
create mode 100644 arch/mips/boot/dts/qca/Makefile
create mode 100644 arch/mips/boot/dts/qca/ar9132.dtsi
create mode 100644 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
create mode 100644 include/linux/platform_data/gpio-ath79.h
--
2.0.0
Signed-off-by: Alban Bedel <[email protected]>
---
.../devicetree/bindings/mips/ath79-soc.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/ath79-soc.txt
diff --git a/Documentation/devicetree/bindings/mips/ath79-soc.txt b/Documentation/devicetree/bindings/mips/ath79-soc.txt
new file mode 100644
index 0000000..88a12a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ath79-soc.txt
@@ -0,0 +1,21 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX SoC
+
+Each device tree must specify a compatible value for the AR SoC
+it uses in the compatible property of the root node. The compatible
+value must be one of the following values:
+
+- qca,ar7130
+- qca,ar7141
+- qca,ar7161
+- qca,ar7240
+- qca,ar7241
+- qca,ar7242
+- qca,ar9130
+- qca,ar9132
+- qca,ar9330
+- qca,ar9331
+- qca,ar9341
+- qca,ar9342
+- qca,ar9344
+- qca,qca9556
+- qca,qca9558
--
2.0.0
Add the bare minimum to load a device tree.
Signed-off-by: Alban Bedel <[email protected]>
---
arch/mips/Kconfig | 1 +
arch/mips/ath79/Kconfig | 10 ++++++++++
arch/mips/ath79/machtypes.h | 1 +
arch/mips/ath79/setup.c | 27 ++++++++++++++++++++++++++-
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 874bbaf..772312d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -133,6 +133,7 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT
+ select USE_OF
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index dfc6020..1d38c6a 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -71,6 +71,16 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+choice
+ prompt "Builtin devicetree selection"
+ default DTB_ATH79_NONE
+ help
+ Select the devicetree.
+
+ config DTB_ATH79_NONE
+ bool "None"
+endchoice
+
endmenu
config SOC_AR71XX
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index 2625405..a13db3d 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -15,6 +15,7 @@
#include <asm/mips_machine.h>
enum ath79_mach_type {
+ ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 74f1af7..01a644f 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -17,12 +17,16 @@
#include <linux/bootmem.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/time.h> /* for mips_hpt_frequency */
#include <asm/reboot.h> /* for _machine_{restart,halt} */
#include <asm/mips_machine.h>
+#include <asm/prom.h>
+#include <asm/fw/fw.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
@@ -194,8 +198,19 @@ unsigned int get_c0_compare_int(void)
void __init plat_mem_setup(void)
{
+ unsigned long fdt_start;
+
set_io_port_base(KSEG1);
+ /* Get the position of the FDT passed by the bootloader */
+ fdt_start = fw_getenvl("fdt_start");
+ if (fdt_start)
+ __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
+#ifdef CONFIG_BUILTIN_DTB
+ else
+ __dt_setup_arch(__dtb_start);
+#endif
+
ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
@@ -203,7 +218,8 @@ void __init plat_mem_setup(void)
ath79_ddr_ctrl_init();
ath79_detect_sys_type();
- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+ if (mips_machtype != ATH79_MACH_GENERIC_OF)
+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
_machine_restart = ath79_restart;
_machine_halt = ath79_halt;
@@ -235,6 +251,10 @@ void __init plat_time_init(void)
static int __init ath79_setup(void)
{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ if (mips_machtype == ATH79_MACH_GENERIC_OF)
+ return 0;
+
ath79_gpio_init();
ath79_register_uart();
ath79_register_wdt();
@@ -246,6 +266,11 @@ static int __init ath79_setup(void)
arch_initcall(ath79_setup);
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
static void __init ath79_generic_init(void)
{
/* Nothing to do */
--
2.0.0
The DDR controller of the ARxxx and AR9xxx famillies provides an
interface to flush the FIFO between various devices and the DDR.
This is mainly used by the IRQ controller to flush the FIFO before
running the interrupt handler of such devices.
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Fix the node names to respect ePAPR
---
.../memory-controllers/ath79-ddr-controller.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
new file mode 100644
index 0000000..5541eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
@@ -0,0 +1,35 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+The DDR controller of the ARxxx and AR9xxx famillies provides an interface
+to flush the FIFO between various devices and the DDR. This is mainly used
+by the IRQ controller to flush the FIFO before running the interrupt handler
+of such devices.
+
+Required properties:
+
+- compatible: has to be "qca,<soc-type>-ddr-controller",
+ "qca,[ar7100|ar7240]-ddr-controller" as fallback.
+ On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
+ fallback, otherwise "qca,ar7240-ddr-controller" should be used.
+- reg: Base address and size of the controllers memory area
+- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer
+ channel
+
+Example:
+
+ ddr_ctrl: ddr-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ ...
+
+ cpuintc@0 {
+ ...
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
--
2.0.0
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Fixed the node names to respect ePAPR
* Removed the unneeded @0 on the node name
---
.../interrupt-controller/qca,ath79-cpu-intc.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
new file mode 100644
index 0000000..aabce78
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
@@ -0,0 +1,44 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
+
+On most SoC the IRQ controller need to flush the DDR FIFO before running
+the interrupt handler of some devices. This is configured using the
+qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+Required Properties:
+
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
+ as fallback
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1 for intc
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Optional Properties:
+
+- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
+ buffer flush
+- qca,ddr-wb-channels: List of phandles to the write buffer channels for
+ each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
+ default to the entry's index.
+
+Example:
+
+ interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ...
+
+ ddr_ctrl: memory-controller@18000000 {
+ ...
+ #qca,ddr-wb-channel-cells = <1>;
+ };
--
2.0.0
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Fixed the node names to respect ePAPR
---
.../interrupt-controller/qca,ath79-misc-intc.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
new file mode 100644
index 0000000..391717a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -0,0 +1,30 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+The MISC interrupt controller is a secondary controller for lower priority
+interrupt.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
+ as fallback
+- reg: Base address and size of the controllers memory area
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc", qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
--
2.0.0
Add OF support for the CPU and MISC interrupt controllers of most
supported ATH79 devices.
Signed-off-by: Alban Bedel <[email protected]>
---
arch/mips/ath79/irq.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 2c3991a..afb0096 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -15,7 +15,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include "../../../drivers/irqchip/irqchip.h"
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
@@ -23,6 +25,7 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
+#include "machtypes.h"
static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
@@ -268,8 +271,90 @@ asmlinkage void plat_irq_dispatch(void)
}
}
+#ifdef CONFIG_IRQCHIP
+static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
+ return 0;
+}
+
+static const struct irq_domain_ops misc_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = misc_map,
+};
+
+static int __init ath79_misc_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ void __iomem *base = ath79_reset_base;
+ struct irq_domain *domain;
+ int irq;
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
+ panic("Failed to get MISC IRQ");
+
+ domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
+ ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, NULL);
+ if (!domain)
+ panic("Failed to add MISC irqdomain");
+
+ /* Disable and clear all interrupts */
+ __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
+
+
+ irq_set_chained_handler(irq, ath79_misc_irq_handler);
+
+ return 0;
+}
+IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
+ ath79_misc_intc_of_init);
+
+static int __init ar79_cpu_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ int err, i, count;
+
+ /* Fill the irq_wb_chan table */
+ count = of_count_phandle_with_args(
+ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
+
+ for (i = 0; i < count; i++) {
+ struct of_phandle_args args;
+ u32 irq = i;
+
+ of_property_read_u32_index(
+ node, "qca,ddr-wb-channel-interrupts", i, &irq);
+ if (irq >= ARRAY_SIZE(irq_wb_chan))
+ continue;
+
+ err = of_parse_phandle_with_args(
+ node, "qca,ddr-wb-channels",
+ "#qca,ddr-wb-channel-cells",
+ i, &args);
+ if (err)
+ return err;
+
+ irq_wb_chan[irq] = args.args[0];
+ pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
+ irq, args.args[0]);
+ }
+
+ return mips_cpu_irq_of_init(node, parent);
+}
+IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
+ ar79_cpu_intc_of_init);
+
+#endif
+
void __init arch_init_irq(void)
{
+ if (mips_machtype == ATH79_MACH_GENERIC_OF) {
+ irqchip_init();
+ return;
+ }
+
if (soc_is_ar71xx() || soc_is_ar724x() ||
soc_is_ar913x() || soc_is_ar933x()) {
irq_wb_chan[2] = 3;
--
2.0.0
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Fixed the node names to respect ePAPR
* Fixed the missing 's' in 'fallbacks' and the 'clocks' property
---
.../devicetree/bindings/clock/qca,ath79-pll.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
new file mode 100644
index 0000000..df3dbc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -0,0 +1,33 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
+
+The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
+ fallbacks:
+ - "qca,ar7100-pll"
+ - "qca,ar7240-pll"
+ - "qca,ar9130-pll"
+ - "qca,ar9330-pll"
+ - "qca,ar9340-pll"
+ - "qca,ar9550-pll"
+- reg: Base address and size of the controllers memory area
+- clock-names: Name of the input clock, has to be "ref"
+- clocks: phandle of the external reference clock
+- #clock-cells: has to be one
+
+Optional properties:
+- clock-output-names: should be "cpu", "ddr", "ahb"
+
+Example:
+
+ memory-controller@18050000 {
+ compatible = "qca,ar9132-ppl", "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ clocks = <&extosc>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
--
2.0.0
Allow using the SoC clocks in the device tree.
Signed-off-by: Alban Bedel <[email protected]>
---
arch/mips/ath79/clock.c | 63 ++++++++++++++++++++++++++++++++++---------------
1 file changed, 44 insertions(+), 19 deletions(-)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 1fcb691..682bf61 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -29,7 +29,14 @@
#define AR724X_BASE_FREQ 5000000
#define AR913X_BASE_FREQ 5000000
-static void __init ath79_add_sys_clkdev(const char *id, unsigned long rate)
+static struct clk *clks[3];
+static struct clk_onecell_data clk_data = {
+ .clks = clks,
+ .clk_num = ARRAY_SIZE(clks),
+};
+
+static struct clk *__init ath79_add_sys_clkdev(
+ const char *id, unsigned long rate)
{
struct clk *clk;
int err;
@@ -41,6 +48,8 @@ static void __init ath79_add_sys_clkdev(const char *id, unsigned long rate)
err = clk_register_clkdev(clk, id, NULL);
if (err)
panic("unable to register %s clock device", id);
+
+ return clk;
}
static void __init ar71xx_clocks_init(void)
@@ -70,9 +79,9 @@ static void __init ar71xx_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -106,9 +115,9 @@ static void __init ar724x_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -139,9 +148,9 @@ static void __init ar913x_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -201,9 +210,9 @@ static void __init ar933x_clocks_init(void)
}
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -335,9 +344,9 @@ static void __init ar934x_clocks_init(void)
ahb_rate = cpu_pll / (postdiv + 1);
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ref", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -422,9 +431,9 @@ static void __init qca955x_clocks_init(void)
ahb_rate = cpu_pll / (postdiv + 1);
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ref", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -446,6 +455,8 @@ void __init ath79_clocks_init(void)
qca955x_clocks_init();
else
BUG();
+
+ of_clk_init(NULL);
}
unsigned long __init
@@ -463,3 +474,17 @@ ath79_get_sys_clk_rate(const char *id)
return rate;
}
+
+#ifdef CONFIG_OF
+static void __init ath79_clocks_init_dt(struct device_node *np)
+{
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9130, "qca,ar9130-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9550, "qca,ar9550-pll", ath79_clocks_init_dt);
+#endif
--
2.0.0
These bindings support the GPIO controllers found on the Qualcomm
Atheros AR7xxx/AR9XXX SoC.
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Add the ngpios property to have fewer fallbacks and simpler code
---
.../devicetree/bindings/gpio/gpio-ath79.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
new file mode 100644
index 0000000..e027864
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -0,0 +1,38 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+Required properties:
+- compatible: has to be "qca,<soctype>-gpio" and one of the following
+ fallback:
+ - "qca,ar7100-gpio"
+ - "qca,ar9340-gpio"
+- reg: Base address and size of the controllers memory area
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+- ngpios: Should be set to the number of GPIOs available on the SoC.
+
+Optional properties:
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ gpio@18040000 {
+ compatible = "qca,ar9132-gpio", "qca,ar9130-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.0.0
Hello.
On 4/19/2015 3:57 PM, Alban Bedel wrote:
> The DDR controller of the ARxxx and AR9xxx famillies provides an
> interface to flush the FIFO between various devices and the DDR.
> This is mainly used by the IRQ controller to flush the FIFO before
> running the interrupt handler of such devices.
> Signed-off-by: Alban Bedel <[email protected]>
> ---
> v2: * Fix the node names to respect ePAPR
I don't see where you did this.
> ---
> .../memory-controllers/ath79-ddr-controller.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
> new file mode 100644
> index 0000000..5541eed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
> @@ -0,0 +1,35 @@
> +Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
> +
> +The DDR controller of the ARxxx and AR9xxx famillies provides an interface
Families.
> +to flush the FIFO between various devices and the DDR. This is mainly used
> +by the IRQ controller to flush the FIFO before running the interrupt handler
> +of such devices.
> +
> +Required properties:
> +
> +- compatible: has to be "qca,<soc-type>-ddr-controller",
> + "qca,[ar7100|ar7240]-ddr-controller" as fallback.
> + On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
> + fallback, otherwise "qca,ar7240-ddr-controller" should be used.
> +- reg: Base address and size of the controllers memory area
> +- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer
> + channel
> +
> +Example:
> +
> + ddr_ctrl: ddr-controller@18000000 {
Should still be "memory-controller@18000000".
> + compatible = "qca,ar9132-ddr-controller",
> + "qca,ar7240-ddr-controller";
> + reg = <0x18000000 0x100>;
> +
> + #qca,ddr-wb-channel-cells = <1>;
> + };
> +
> + ...
> +
> + cpuintc@0 {
"interrupt-controller" here?
> + ...
> + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
> + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
> + <&ddr_ctrl 0>, <&ddr_ctrl 1>;
> + };
WBR, Sergei
On Sun, Apr 19, 2015 at 3:42 PM, Alban Bedel <[email protected]> wrote:
> These bindings support the GPIO controllers found on the Qualcomm
> Atheros AR7xxx/AR9XXX SoC.
>
> Signed-off-by: Alban Bedel <[email protected]>
> ---
> v2: * Add the ngpios property to have fewer fallbacks and simpler code
> ---
> .../devicetree/bindings/gpio/gpio-ath79.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ath79.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
> new file mode 100644
> index 0000000..e027864
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
> @@ -0,0 +1,38 @@
> +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
> +
> +Required properties:
> +- compatible: has to be "qca,<soctype>-gpio" and one of the following
> + fallback:
maybe plural?
> + - "qca,ar7100-gpio"
> + - "qca,ar9340-gpio"
> +- reg: Base address and size of the controllers memory area
> +- gpio-controller : Marks the device node as a GPIO controller.
> +- #gpio-cells : Should be two. The first cell is the pin number and the
> + second cell is used to specify optional parameters.
> +- ngpios: Should be set to the number of GPIOs available on the SoC.
> +
> +Optional properties:
> +- interrupt-parent: phandle of the parent interrupt controller.
> +- interrupts: Interrupt specifier for the controllers interrupt.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode interrupt
> + source, should be 2
> +
> +Please refer to interrupts.txt in this directory for details of the common
> +Interrupt Controllers bindings used by client devices.
> +
> +Example:
> +
> + gpio@18040000 {
> + compatible = "qca,ar9132-gpio", "qca,ar9130-gpio";
You have neither "qca,ar7100-gpio" nor "qca,ar9340-gpio", so by your
own documentation this would be invalid.
Jonas
Hi,
On Sun, Apr 19, 2015 at 2:58 PM, Alban Bedel <[email protected]> wrote:
> Signed-off-by: Alban Bedel <[email protected]>
> ---
> v2: * Fixed the node names to respect ePAPR
> * Fixed the missing 's' in 'fallbacks' and the 'clocks' property
> ---
> .../devicetree/bindings/clock/qca,ath79-pll.txt | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
> new file mode 100644
> index 0000000..df3dbc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
> @@ -0,0 +1,33 @@
> +Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
> +
> +The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
> +
> +Required Properties:
> +- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
> + fallbacks:
> + - "qca,ar7100-pll"
> + - "qca,ar7240-pll"
> + - "qca,ar9130-pll"
> + - "qca,ar9330-pll"
> + - "qca,ar9340-pll"
> + - "qca,ar9550-pll"
Shouldn't this be "qca,qca9550-pll"?
Jonas
Replace the simple GPIO chip registration by a platform driver
and make ath79_gpio_init() just register the device.
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Added an 'ngpios' property instead of the many matches
* Use a platform data struct to store the device config on
non-DT boards. It make for a cleaner separation of the config
and driver code.
---
arch/mips/ath79/dev-common.c | 51 +++++++++++++++++++++
arch/mips/ath79/gpio.c | 79 +++++++++++++++++++++++---------
include/linux/platform_data/gpio-ath79.h | 19 ++++++++
3 files changed, 127 insertions(+), 22 deletions(-)
create mode 100644 include/linux/platform_data/gpio-ath79.h
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
index 516225d..9d0172a 100644
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-ath79.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -106,3 +107,53 @@ void __init ath79_register_wdt(void)
platform_device_register_simple("ath79-wdt", -1, &res, 1);
}
+
+static struct ath79_gpio_platform_data ath79_gpio_pdata;
+
+static struct resource ath79_gpio_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GPIO_BASE,
+ .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
+ },
+ {
+ .start = ATH79_MISC_IRQ(2),
+ .end = ATH79_MISC_IRQ(2),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ath79_gpio_device = {
+ .name = "ath79-gpio",
+ .id = -1,
+ .resource = ath79_gpio_resources,
+ .num_resources = ARRAY_SIZE(ath79_gpio_resources),
+ .dev = {
+ .platform_data = &ath79_gpio_pdata
+ },
+};
+
+void __init ath79_gpio_init(void)
+{
+ if (soc_is_ar71xx()) {
+ ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
+ } else if (soc_is_ar7240()) {
+ ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
+ } else if (soc_is_ar7241() || soc_is_ar7242()) {
+ ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
+ } else if (soc_is_ar913x()) {
+ ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
+ } else if (soc_is_ar933x()) {
+ ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
+ } else if (soc_is_ar934x()) {
+ ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
+ ath79_gpio_pdata.oe_inverted = 1;
+ } else if (soc_is_qca955x()) {
+ ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
+ ath79_gpio_pdata.oe_inverted = 1;
+ } else {
+ BUG();
+ }
+
+ platform_device_register(&ath79_gpio_device);
+}
diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c
index 8d025b0..f59ccb2 100644
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -20,13 +20,15 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-ath79.h>
+#include <linux/of_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
static void __iomem *ath79_gpio_base;
-static unsigned long ath79_gpio_count;
+static u32 ath79_gpio_count;
static DEFINE_SPINLOCK(ath79_gpio_lock);
static void __ath79_gpio_set_value(unsigned gpio, int value)
@@ -178,39 +180,72 @@ void ath79_gpio_function_disable(u32 mask)
ath79_gpio_function_setup(0, mask);
}
-void __init ath79_gpio_init(void)
+static const struct of_device_id ath79_gpio_of_match[] = {
+ { .compatible = "qca,ar7100-gpio" },
+ { .compatible = "qca,ar9340-gpio" },
+ {},
+};
+
+static int ath79_gpio_probe(struct platform_device *pdev)
{
+ struct ath79_gpio_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ bool oe_inverted;
int err;
- if (soc_is_ar71xx())
- ath79_gpio_count = AR71XX_GPIO_COUNT;
- else if (soc_is_ar7240())
- ath79_gpio_count = AR7240_GPIO_COUNT;
- else if (soc_is_ar7241() || soc_is_ar7242())
- ath79_gpio_count = AR7241_GPIO_COUNT;
- else if (soc_is_ar913x())
- ath79_gpio_count = AR913X_GPIO_COUNT;
- else if (soc_is_ar933x())
- ath79_gpio_count = AR933X_GPIO_COUNT;
- else if (soc_is_ar934x())
- ath79_gpio_count = AR934X_GPIO_COUNT;
- else if (soc_is_qca955x())
- ath79_gpio_count = QCA955X_GPIO_COUNT;
- else
- BUG();
+ if (np) {
+ err = of_property_read_u32(np, "ngpios", &ath79_gpio_count);
+ if (err) {
+ dev_err(&pdev->dev, "ngpios property is not valid\n");
+ return err;
+ }
+ if (ath79_gpio_count >= 32) {
+ dev_err(&pdev->dev, "ngpios must be less than 32\n");
+ return -EINVAL;
+ }
+ oe_inverted = of_device_is_compatible(np, "qca,ar9340-gpio");
+ } else if (pdata) {
+ ath79_gpio_count = pdata->ngpios;
+ oe_inverted = pdata->oe_inverted;
+ } else {
+ dev_err(&pdev->dev, "No DT node or platform data found\n");
+ return -EINVAL;
+ }
- ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ath79_gpio_base = devm_ioremap_nocache(
+ &pdev->dev, res->start, resource_size(res));
+ if (!ath79_gpio_base)
+ return -ENOMEM;
+
+ ath79_gpio_chip.dev = &pdev->dev;
ath79_gpio_chip.ngpio = ath79_gpio_count;
- if (soc_is_ar934x() || soc_is_qca955x()) {
+ if (oe_inverted) {
ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
}
err = gpiochip_add(&ath79_gpio_chip);
- if (err)
- panic("cannot add AR71xx GPIO chip, error=%d", err);
+ if (err) {
+ dev_err(&pdev->dev,
+ "cannot add AR71xx GPIO chip, error=%d", err);
+ return err;
+ }
+
+ return 0;
}
+static struct platform_driver ath79_gpio_driver = {
+ .driver = {
+ .name = "ath79-gpio",
+ .of_match_table = ath79_gpio_of_match,
+ },
+ .probe = ath79_gpio_probe,
+};
+
+module_platform_driver(ath79_gpio_driver);
+
int gpio_get_value(unsigned gpio)
{
if (gpio < ath79_gpio_count)
diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h
new file mode 100644
index 0000000..a9419c2
--- /dev/null
+++ b/include/linux/platform_data/gpio-ath79.h
@@ -0,0 +1,19 @@
+/*
+ * Atheros AR7XXX/AR9XXX GPIO controller platfrom data
+ *
+ * Copyright (C) 2015 Alban Bedel <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H
+#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H
+
+struct ath79_gpio_platform_data {
+ unsigned ngpios;
+ bool oe_inverted;
+};
+
+#endif
--
2.0.0
Signed-off-by: Alban Bedel <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b13aa55..9e965b6 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -185,6 +185,7 @@ tbs TBS Technologies
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
+tplink TP-LINK Technologies Co., Ltd.
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
--
2.0.0
Add a DTS for TL-WR1043ND version 1 and allow to have it built in the
kernel to circumvent the broken u-boot found on these boards.
Currently only the UART, LEDs and buttons are supported.
Signed-off-by: Alban Bedel <[email protected]>
---
v2: * Rebased for the new vendor directory structure
* Merged the 2 separate patch for SoC dtsi and board DTS in a
single one
* Fixed the node names to use ePAPR standardized names
---
arch/mips/ath79/Kconfig | 5 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/boot/dts/qca/Makefile | 9 ++
arch/mips/boot/dts/qca/ar9132.dtsi | 121 +++++++++++++++++++++++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 83 ++++++++++++++++
5 files changed, 219 insertions(+)
create mode 100644 arch/mips/boot/dts/qca/Makefile
create mode 100644 arch/mips/boot/dts/qca/ar9132.dtsi
create mode 100644 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 1d38c6a..0df05d0 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -79,6 +79,11 @@ choice
config DTB_ATH79_NONE
bool "None"
+
+ config DTB_TL_WR1043ND_V1
+ bool "TL-WR1043ND Version 1"
+ select BUILTIN_DTB
+ select SOC_AR913X
endchoice
endmenu
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 5d95e4b..9975485 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -3,6 +3,7 @@ dts-dirs += cavium-octeon
dts-dirs += lantiq
dts-dirs += mti
dts-dirs += netlogic
+dts-dirs += qca
dts-dirs += ralink
obj-y := $(addsuffix /, $(dts-dirs))
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
new file mode 100644
index 0000000..5f02aa6
--- /dev/null
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -0,0 +1,9 @@
+dtb-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
new file mode 100644
index 0000000..c05b65c2
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -0,0 +1,121 @@
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll 2>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-ppl",
+ "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll 2>;
+ clock-names = "wdt";
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ "qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
new file mode 100644
index 0000000..ab36c7c
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+ model = "TP-Link TL-WR1043ND Version 1";
+
+ alias {
+ serial0 = "/ahb/apb/uart@18020000";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ extosc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ ahb {
+ apb {
+ uart@18020000 {
+ status = "okay";
+ };
+
+ pll-controller@18050000 {
+ clocks = <&extosc>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ poll-interval = <20>;
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button@1 {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led@1 {
+ label = "tp-link:green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@3 {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--
2.0.0