Changes in v2 (applied review comments):
- Fixed indentation in both patches
- Detect memset(foo, 0x00, ETH_ALEN)
- Detect memset(foo, 255, ETH_ALEN)
- Rephrased 2/2 commit message
Patch Notes from v1:
Add 3 new warnings to checkpatch:
1) PREFER_ETHER_ADDR_EQUAL
Replace memcmp(foo, bar, ETH_ALEN) with ether_addr_equal*()
2) PREFER_ETH_ZERO_ADDR
Replace memset(foo, 0, ETH_ALEN) with eth_zero_addr()
3) PREFER_ETH_BROADCAST_ADDR
Replace memset(foo, 0xFF, ETH_ALEN) with eth_broadcast_addr()
Mateusz Kulikowski (2):
checkpatch: suggest using ether_addr_equal*()
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
scripts/checkpatch.pl | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--
1.8.4.1
Check if memcmp() is used to compare ethernet addresses and suggest
using ether_addr_equal() or ether_addr_equal_unaligned()
Signed-off-by: Mateusz Kulikowski <[email protected]>
---
scripts/checkpatch.pl | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 89b1df4..b9ea436 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -5035,6 +5035,13 @@ sub process {
}
}
+# Check for memcmp(foo, bar, ETH_ALEN) that could be ether_addr_equal*(foo, bar)
+ if ($^V && $^V ge 5.10.0 &&
+ $line =~ /^\+(?:.*?)\bmemcmp\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
+ WARN("PREFER_ETHER_ADDR_EQUAL",
+ "Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()\n" . $herecurr)
+ }
+
# typecasts on min/max could be min_t/max_t
if ($^V && $^V ge 5.10.0 &&
defined $stat &&
--
1.8.4.1
Suggest using eth_zero_addr() or eth_broadcast_addr() instead of memset().
Signed-off-by: Mateusz Kulikowski <[email protected]>
---
scripts/checkpatch.pl | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b9ea436..aee6d43 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -5042,6 +5042,22 @@ sub process {
"Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()\n" . $herecurr)
}
+# check for memset(foo, 0x0, ETH_ALEN) that could be eth_zero_addr
+# check for memset(foo, 0xFF, ETH_ALEN) that could be eth_broadcast_addr
+ if ($^V && $^V ge 5.10.0 &&
+ $line =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
+
+ my $ms_val = $7;
+
+ if ($ms_val =~ /^(0x|)0+$/i) {
+ WARN("PREFER_ETH_ZERO_ADDR",
+ "Prefer eth_zero_addr over memset()\n" . $herecurr);
+ } elsif ($ms_val =~ /^(?:0xff|255)$/i) {
+ WARN("PREFER_ETH_BROADCAST_ADDR",
+ "Prefer eth_broadcast_addr() over memset()\n" . $herecurr);
+ }
+ }
+
# typecasts on min/max could be min_t/max_t
if ($^V && $^V ge 5.10.0 &&
defined $stat &&
--
1.8.4.1
On Mon, 2015-04-20 at 00:16 +0200, Mateusz Kulikowski wrote:
> Suggest using eth_zero_addr() or eth_broadcast_addr() instead of memset().
Hi again Mateusz
> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
[]
> @@ -5042,6 +5042,22 @@ sub process {
> "Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()\n" . $herecurr)
> }
>
> +# check for memset(foo, 0x0, ETH_ALEN) that could be eth_zero_addr
> +# check for memset(foo, 0xFF, ETH_ALEN) that could be eth_broadcast_addr
> + if ($^V && $^V ge 5.10.0 &&
> + $line =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
Because you are working with $line and not $stat,
the last /s isn't useful here.
$line is always a single line.
> + my $ms_val = $7;
> +
> + if ($ms_val =~ /^(0x|)0+$/i) {
It's trivially faster to use (?:0x|) so the 0x is not captured.
> + WARN("PREFER_ETH_ZERO_ADDR",
> + "Prefer eth_zero_addr over memset()\n" . $herecurr);
And these could be:
if (WARN(...) &&
$fix) {
$fixed[$fixlinenr] = s/\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*,\s*ETH_ALEN\s*\)/eth_zero_addr($1)/;
}
}
> + } elsif ($ms_val =~ /^(?:0xff|255)$/i) {
> + WARN("PREFER_ETH_BROADCAST_ADDR",
> + "Prefer eth_broadcast_addr() over memset()\n" . $herecurr);
if (WARN(...) &&
$fix) {
$fixed[$fixlinenr] = s/\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*,\s*ETH_ALEN\s*\)/eth_broadcast_addr($1)/;
}
cheers, Joe
Hi Joe,
On 20.04.2015 03:13, Joe Perches wrote:
> On Mon, 2015-04-20 at 00:16 +0200, Mateusz Kulikowski wrote:
>> Suggest using eth_zero_addr() or eth_broadcast_addr() instead of memset().
>
> Hi again Mateusz
>
>> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> []
>> @@ -5042,6 +5042,22 @@ sub process {
>> "Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()\n" . $herecurr)
>> }
>>
>> +# check for memset(foo, 0x0, ETH_ALEN) that could be eth_zero_addr
>> +# check for memset(foo, 0xFF, ETH_ALEN) that could be eth_broadcast_addr
>> + if ($^V && $^V ge 5.10.0 &&
>> + $line =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
>
> Because you are working with $line and not $stat,
> the last /s isn't useful here.
>
> $line is always a single line.
Perhaps it would be smarter to use (for both patches) $stat instead.
This applies also to existing checks (like PREFER_ETHER_ADDR_COPY)
so we can catch calls formatted like
memset(very.long.structure->something.something_different42,
0xFF, ETH_ALEN);
Regards,
Mateusz
On Tue, 2015-04-21 at 22:57 +0200, Mateusz Kulikowski wrote:
> Hi Joe,
>
> On 20.04.2015 03:13, Joe Perches wrote:
> > On Mon, 2015-04-20 at 00:16 +0200, Mateusz Kulikowski wrote:
> >> Suggest using eth_zero_addr() or eth_broadcast_addr() instead of memset().
> >
> > Hi again Mateusz
> >
> >> diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> > []
> >> @@ -5042,6 +5042,22 @@ sub process {
> >> "Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()\n" . $herecurr)
> >> }
> >>
> >> +# check for memset(foo, 0x0, ETH_ALEN) that could be eth_zero_addr
> >> +# check for memset(foo, 0xFF, ETH_ALEN) that could be eth_broadcast_addr
> >> + if ($^V && $^V ge 5.10.0 &&
> >> + $line =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
> >
> > Because you are working with $line and not $stat,
> > the last /s isn't useful here.
> >
> > $line is always a single line.
>
> Perhaps it would be smarter to use (for both patches) $stat instead.
> This applies also to existing checks (like PREFER_ETHER_ADDR_COPY)
> so we can catch calls formatted like
>
> memset(very.long.structure->something.something_different42,
> 0xFF, ETH_ALEN);
Yes, likely that's true.
checkpatch couldn't --fix it easily unless it's on a
single line though.
As far as I can tell, there are ~120 of these "memcpy"s
in the tree, but there aren't any "memset"s like that
split into 2 or more lines.
Here's a list of the multiple line memcpy(..., ETH_ALEN)
uses that I found.
arch/arm/mach-davinci/board-mityomapl138.c:144: memcpy(soc_info->emac_pdata->mac_addr,
factory_config.mac, ETH_ALEN);
drivers/staging/rtl8712/rtl8712_recv.c:395: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
ETH_ALEN);
drivers/staging/rtl8712/rtl8712_recv.c:396: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
ETH_ALEN);
drivers/staging/rtl8712/rtl8712_recv.c:402: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
ETH_ALEN);
drivers/staging/rtl8712/rtl8712_recv.c:403: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
ETH_ALEN);
drivers/staging/rtl8712/os_intfs.c:398: memcpy(pnetdev->dev_addr,
padapter->eeprompriv.mac_addr, ETH_ALEN);
drivers/staging/rtl8712/os_intfs.c:414: memcpy(padapter->eeprompriv.mac_addr,
pnetdev->dev_addr, ETH_ALEN);
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:107: memcpy(wrqu.ap_addr.sa_data, pmlmepriv->cur_network.network.MacAddress,
ETH_ALEN);
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:838: memcpy(psecuritypriv->PMKIDList[psecuritypriv->
PMKIDIndex].Bssid, strIssueBssid, ETH_ALEN);
drivers/staging/rtl8712/rtl871x_xmit.c:489: memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv),
ETH_ALEN);
drivers/staging/rtl8712/rtl871x_xmit.c:496: memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv),
ETH_ALEN);
drivers/staging/rtl8712/rtl871x_xmit.c:503: memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
ETH_ALEN);
drivers/staging/rtl8712/rtl871x_xmit.c:507: memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
ETH_ALEN);
drivers/staging/rtl8192e/rtllib_softmac_wx.c:125: memcpy(wrqu->ap_addr.sa_data,
ieee->current_network.bssid, ETH_ALEN);
drivers/staging/rtl8192e/rtllib_tx.c:697: memcpy(&header.addr1, ieee->current_network.bssid,
ETH_ALEN);
drivers/staging/rtl8192e/rtllib_tx.c:700: memcpy(&header.addr3,
ieee->current_network.bssid, ETH_ALEN);
drivers/staging/rtl8192e/rtllib_tx.c:709: memcpy(&header.addr3, ieee->current_network.bssid,
ETH_ALEN);
drivers/staging/rtl8192e/rtllib_softmac.c:3748: memcpy(wrqu.ap_addr.sa_data, ieee->current_network.bssid,
ETH_ALEN);
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c:126: memcpy(wrqu->ap_addr.sa_data,
ieee->current_network.bssid, ETH_ALEN);
drivers/staging/slicoss/slicoss.c:567: memcpy(adapter->currmacaddr, adapter->macaddr,
ETH_ALEN);
drivers/staging/slicoss/slicoss.c:569: memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
ETH_ALEN);
drivers/staging/rtl8723au/hal/usb_halinit.c:1020: memcpy(pEEPROM->mac_addr, &hwinfo[EEPROM_MAC_ADDR_8723AU],
ETH_ALEN);
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:327: memcpy(pwlanhdr->addr1,
get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:328: memcpy(pwlanhdr->addr2, myid(&padapter->eeprompriv),
ETH_ALEN);
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:335: memcpy(pwlanhdr->addr2,
get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:336: memcpy(pwlanhdr->addr3, myid(&padapter->eeprompriv),
ETH_ALEN);
drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:342: memcpy(pwlanhdr->addr3,
get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
drivers/scsi/fcoe/fcoe_ctlr.c:945: memcpy(fcf->fcf_mac,
((struct fip_mac_desc *)desc)->fd_mac,
drivers/scsi/fcoe/fcoe_ctlr.c:1198: memcpy(granted_mac,
((struct fip_mac_desc *)desc)->fd_mac,
drivers/scsi/fcoe/fcoe_ctlr.c:1204: memcpy(sel->fcoe_mac,
((struct fip_mac_desc *)desc)->fd_mac,
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1187: memcpy(ctlr->ctl_src_addr, ha->addr,
ETH_ALEN);
drivers/net/ethernet/emulex/benet/be_cmds.c:3014: memcpy(mac, resp->macid_macaddr.mac_addr_id.macaddr,
ETH_ALEN);
drivers/net/ethernet/emulex/benet/be_cmds.c:3043: memcpy(mac, resp->macaddr_list[0].mac_addr_id.macaddr,
ETH_ALEN);
drivers/net/ethernet/neterion/vxge/vxge-main.c:4632: memcpy((u8 *)vdev->vpaths[j].macaddr,
ll_config->device_hw_info.mac_addrs[i],
drivers/net/ethernet/i825xx/sun3_82586.c:538: memcpy((char *) mc_cmd->mc_list[i++],
ha->addr, ETH_ALEN);
drivers/net/ethernet/intel/e100.c:1600: memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
ETH_ALEN);
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1169: memcpy(vfres->vsi_res[i].default_mac_addr,
vf->default_lan_addr.addr, ETH_ALEN);
drivers/net/ethernet/intel/i40evf/i40e_common.c:615: memcpy(hw->mac.perm_addr, vsi_res->default_mac_addr,
ETH_ALEN);
drivers/net/ethernet/intel/i40evf/i40e_common.c:616: memcpy(hw->mac.addr, vsi_res->default_mac_addr,
ETH_ALEN);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:3522: memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac,
ETH_ALEN);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:380: memcpy(bp->dev->dev_addr,
bp->acquire_resp.resc.current_mac_addr,
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:757: memcpy(req->filters[0].mac, bp->dev->dev_addr,
ETH_ALEN);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:1222: memcpy(resc->current_mac_addr, bulletin->mac,
ETH_ALEN);
drivers/net/ethernet/toshiba/ps3_gelic_wireless.c:1162: memcpy(wl->bssid, data->ap_addr.sa_data,
ETH_ALEN);
drivers/net/ethernet/toshiba/ps3_gelic_wireless.c:1188: memcpy(data->ap_addr.sa_data, wl->active_bssid,
ETH_ALEN);
drivers/net/ethernet/micrel/ksz884x.c:4076: memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS,
ETH_ALEN);
drivers/net/ethernet/micrel/ksz884x.c:7091: memcpy(dev->dev_addr, hw_priv->hw.override_addr,
ETH_ALEN);
drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1152: memcpy(rxf->ucast_active_mac.addr,
rxf->ucast_pending_mac->addr, ETH_ALEN);
drivers/net/ethernet/brocade/bna/bnad.c:1865: memcpy(&mc_list[i * ETH_ALEN], &mc_addr->addr[0],
ETH_ALEN);
drivers/net/ethernet/brocade/bna/bnad.c:3143: memcpy(&mac_list[entry * ETH_ALEN],
&ha->addr[0], ETH_ALEN);
drivers/net/ethernet/atheros/atlx/atl1.c:3132: memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
ETH_ALEN);
drivers/net/ethernet/chelsio/cxgb3/t3_hw.c:3726: memcpy(adapter->port[i]->dev_addr, hw_addr,
ETH_ALEN);
drivers/net/ethernet/mellanox/mlx4/mcg.c:847: memcpy(rule_hw->eth.dst_mac_msk, spec->eth.dst_mac_msk,
ETH_ALEN);
drivers/net/ethernet/mellanox/mlx4/mcg.c:849: memcpy(rule_hw->eth.src_mac_msk, spec->eth.src_mac_msk,
ETH_ALEN);
drivers/net/ethernet/ti/cpsw.c:2112: memcpy(priv_sl2->mac_addr, data->slave_data[1].mac_addr,
ETH_ALEN);
drivers/net/ethernet/sun/sunvnet.c:1532: memcpy(&info.mcast_addr[n_addrs * ETH_ALEN],
m->addr, ETH_ALEN);
drivers/net/ethernet/sun/sunvnet.c:1557: memcpy(&info.mcast_addr[n_addrs * ETH_ALEN],
m->addr, ETH_ALEN);
drivers/net/vmxnet3/vmxnet3_drv.c:2033: memcpy(buf + i++ * ETH_ALEN, ha->addr,
ETH_ALEN);
drivers/net/wireless/cw1200/txrx.c:1039: memcpy(&priv->action_frame_sa[0],
ieee80211_get_SA(frame), ETH_ALEN);
drivers/net/wireless/cw1200/txrx.c:1051: memcpy(&priv->action_frame_sa[0],
ieee80211_get_SA(frame), ETH_ALEN);
drivers/net/wireless/cw1200/txrx.c:1410: memcpy(map_link.mac_addr, priv->link_id_db[i].mac,
ETH_ALEN);
drivers/net/wireless/cw1200/txrx.c:1448: memcpy(map_link.mac_addr,
priv->link_id_db[i].mac,
drivers/net/wireless/cw1200/sta.c:558: memcpy(&priv->multicast_filter.macaddrs[count],
ha->addr, ETH_ALEN);
drivers/net/wireless/cw1200/sta.c:725: memcpy(wsm_key->wep_pairwise.peer,
peer_addr, ETH_ALEN);
drivers/net/wireless/cw1200/sta.c:741: memcpy(wsm_key->tkip_pairwise.peer,
peer_addr, ETH_ALEN);
drivers/net/wireless/cw1200/sta.c:774: memcpy(wsm_key->aes_pairwise.peer,
peer_addr, ETH_ALEN);
drivers/net/wireless/cw1200/sta.c:796: memcpy(wsm_key->wapi_pairwise.peer,
peer_addr, ETH_ALEN);
drivers/net/wireless/prism54/isl_ioctl.c:2491: memcpy(priv->ndev->dev_addr,
&((struct sockaddr *) addr)->sa_data, ETH_ALEN);
drivers/net/wireless/iwlwifi/dvm/main.c:1317: memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
ETH_ALEN);
drivers/net/wireless/iwlwifi/mvm/mac80211.c:501: memcpy(mvm->addresses[i].addr, mvm->addresses[i-1].addr,
ETH_ALEN);
drivers/net/wireless/iwlwifi/mvm/mac80211.c:1812: memcpy(&cmd->addr_list[cmd->count * ETH_ALEN],
addr->addr, ETH_ALEN);
drivers/net/wireless/iwlwifi/mvm/power.c:508: memcpy(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
ETH_ALEN);
drivers/net/wireless/iwlegacy/common.c:5471: memcpy(il->staging.bssid_addr, bss_conf->bssid,
ETH_ALEN);
drivers/net/wireless/rsi/rsi_91x_mgmt.c:1281: memcpy(common->mac_addr,
&msg[offset],
drivers/net/wireless/rsi/rsi_91x_mgmt.c:1282: memcpy(&common->fw_ver,
&msg[offset + ETH_ALEN],
drivers/net/wireless/wl3501_cs.c:876: memcpy(this->bssid,
this->bss_set[i].bssid, ETH_ALEN);
drivers/net/wireless/ath/ath10k/wmi.c:4128: memcpy(&bssids->bssid_list[i],
arg->bssids[i].bssid,
drivers/net/wireless/ath/wcn36xx/smd.c:1059: memcpy(&msg_body.bss_params.bssid,
&orig->bss_params.bssid, ETH_ALEN);
drivers/net/wireless/ath/wcn36xx/smd.c:1060: memcpy(&msg_body.bss_params.self_mac_addr,
&orig->bss_params.self_mac_addr, ETH_ALEN);
drivers/net/wireless/ipw2x00/ipw2200.c:4517: memcpy(priv->ieee->bssid,
priv->bssid, ETH_ALEN);
drivers/net/wireless/ipw2x00/ipw2200.c:4521: memcpy(priv->ieee->bssid,
priv->bssid, ETH_ALEN);
drivers/net/wireless/ipw2x00/ipw2100.c:4728: memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
ETH_ALEN);
drivers/net/wireless/mwl8k.c:3970: memcpy(&cmd->create_params.peer_mac_addr[0], stream->sta->addr,
ETH_ALEN);
drivers/net/wireless/hostap/hostap_80211_tx.c:180: memcpy(&hdr.addr1, iface->u.wds.remote_addr,
ETH_ALEN);
drivers/net/wireless/hostap/hostap_80211_tx.c:195: memcpy(&hdr.addr1, to_assoc_ap ?
local->assoc_ap_addr : local->bssid, ETH_ALEN);
drivers/net/wireless/rtlwifi/cam.c:305: memcpy(rtlpriv->sec.hwsec_cam_sta_addr[entry_idx],
sta_addr, ETH_ALEN);
drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c:3181: memcpy(&cfg->pmk_list->pmkids.pmkid[i].BSSID,
&cfg->pmk_list->pmkids.pmkid[i + 1].BSSID,
drivers/net/wireless/airo.c:3657: memcpy(&micbuf,
ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2,
drivers/net/wireless/airo.c:3667: memcpy(buffer + ETH_ALEN * 2,
ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off,
drivers/net/wireless/airo.c:7189: memcpy(address[i].sa_data,
status_rid.bssid[i], ETH_ALEN);
drivers/net/wireless/libertas/cmd.c:156: memcpy(priv->mesh_dev->dev_addr,
priv->current_addr, ETH_ALEN);
drivers/net/wireless/rndis_wlan.c:1630: memcpy(mc_addrs + i++ * ETH_ALEN,
ha->addr, ETH_ALEN);
drivers/net/wireless/ti/wl1251/main.c:757: memcpy(fp->mc_list[fp->mc_list_length],
ha->addr, ETH_ALEN);
drivers/net/wireless/ti/wlcore/main.c:3169: memcpy(fp->mc_list[fp->mc_list_length],
ha->addr, ETH_ALEN);
drivers/net/wireless/mwifiex/sta_cmdresp.c:845: memcpy(priv->curr_bss_params.bss_descriptor.mac_address,
ibss_coal_resp->bssid, ETH_ALEN);
drivers/net/wireless/mwifiex/sta_rx.c:251: memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
ETH_ALEN);
drivers/net/wireless/mwifiex/uap_event.c:132: memcpy(priv->netdev->dev_addr, adapter->event_body + 2,
ETH_ALEN);
drivers/net/wireless/mwifiex/cfg80211.c:2881: memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr,
ETH_ALEN);
drivers/net/wireless/mwifiex/cfg80211.c:2891: memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr,
ETH_ALEN);
drivers/net/wireless/mwifiex/sta_cmd.c:411: memcpy(cmd->params.mac_addr.mac_addr, priv->curr_addr,
ETH_ALEN);
drivers/net/wireless/mwifiex/sta_cmd.c:437: memcpy(mcast_addr->mac_list, mcast_list->mac_list,
mcast_list->num_multicast_addr * ETH_ALEN);
drivers/net/wireless/mwifiex/11n_rxreorder.c:483: memcpy(add_ba_rsp->peer_mac_addr, cmd_addba_req->peer_mac_addr,
ETH_ALEN);
drivers/net/wireless/mwifiex/sta_event.c:118: memcpy(priv->prev_bssid,
priv->curr_bss_params.bss_descriptor.mac_address, ETH_ALEN);
drivers/net/wireless/mwifiex/scan.c:873: memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid,
ETH_ALEN);
drivers/net/wireless/mwifiex/join.c:1092: memcpy(&adhoc_join->bss_descriptor.bssid,
&bss_desc->mac_address, ETH_ALEN);
drivers/net/wireless/mwifiex/join.c:1231: memcpy(bss_desc->mac_address,
adhoc_result->bssid, ETH_ALEN);
drivers/net/wireless/mwifiex/join.c:1390: memcpy(mac_address,
priv->curr_bss_params.bss_descriptor.mac_address,
drivers/net/wireless/libertas_tf/cmd.c:333: memcpy(cmd.maclist, priv->multicastlist,
priv->nr_of_multicastmacaddr * ETH_ALEN);
drivers/net/wireless/libertas_tf/main.c:284: memcpy(txpd->tx_dest_addr_high, skb->data + sizeof(struct txpd) + 4,
ETH_ALEN);
drivers/net/usb/lg-vl600.c:197: memcpy(ethhdr->h_source,
&buf->data[sizeof(*ethhdr) + 0x8],
drivers/net/usb/lg-vl600.c:198: memcpy(ethhdr->h_dest,
&buf->data[sizeof(*ethhdr) + 0x12],
drivers/s390/net/qeth_l3_main.c:1489: memcpy(card->dev->dev_addr,
cmd->data.create_destroy_addr.unique_id, ETH_ALEN);
drivers/infiniband/hw/mlx4/main.c:869: memcpy(mlx4_spec->eth.dst_mac, ib_spec->eth.val.dst_mac,
ETH_ALEN);
drivers/infiniband/hw/mlx4/main.c:870: memcpy(mlx4_spec->eth.dst_mac_msk, ib_spec->eth.mask.dst_mac,
ETH_ALEN);
net/ethernet/eth.c:253: memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
haddr, ETH_ALEN);
net/mac80211/mlme.c:701: memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
ETH_ALEN);
net/mac80211/iface.c:563: memcpy(dev->dev_addr,
local->hw.wiphy->perm_addr,
net/mac80211/iface.c:1582: memcpy(perm_addr,
local->hw.wiphy->addresses[i].addr,
net/wireless/nl80211.c:9033: memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]),
ETH_ALEN);
net/wireless/wext-spy.c:57: memcpy(spydata->spy_address[i], address[i].sa_data,
ETH_ALEN);
net/bluetooth/bnep/core.c:387: memcpy(__skb_put(nskb, ETH_ALEN), skb_mac_header(skb),
ETH_ALEN);
net/bluetooth/bnep/core.c:388: memcpy(__skb_put(nskb, ETH_ALEN + 2), s->eh.h_source,
ETH_ALEN + 2);
net/bluetooth/bnep/core.c:392: memcpy(__skb_put(nskb, ETH_ALEN * 2), skb_mac_header(skb),
ETH_ALEN * 2);
On 21.04.2015 23:22, Joe Perches wrote:
> On Tue, 2015-04-21 at 22:57 +0200, Mateusz Kulikowski wrote:
(...)
>>
>> Perhaps it would be smarter to use (for both patches) $stat instead.
>> This applies also to existing checks (like PREFER_ETHER_ADDR_COPY)
>> so we can catch calls formatted like
>>
>> memset(very.long.structure->something.something_different42,
>> 0xFF, ETH_ALEN);
>
> Yes, likely that's true.
>
> checkpatch couldn't --fix it easily unless it's on a
> single line though.
True, True; If you prefer $line and ability to --fix - I'll use that in v3
>
> As far as I can tell, there are ~120 of these "memcpy"s
> in the tree, but there aren't any "memset"s like that
> split into 2 or more lines.
Some of them are probably candidates for ether_addr_copy(_unaligned) :)
I'll probably take a look at them once I have both functions available.
Regards,
Mateusz
>
> Here's a list of the multiple line memcpy(..., ETH_ALEN)
> uses that I found.
>
> arch/arm/mach-davinci/board-mityomapl138.c:144: memcpy(soc_info->emac_pdata->mac_addr,
> factory_config.mac, ETH_ALEN);
> drivers/staging/rtl8712/rtl8712_recv.c:395: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
> ETH_ALEN);
> drivers/staging/rtl8712/rtl8712_recv.c:396: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
> ETH_ALEN);
> drivers/staging/rtl8712/rtl8712_recv.c:402: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->src,
> ETH_ALEN);
> drivers/staging/rtl8712/rtl8712_recv.c:403: memcpy(skb_push(sub_skb, ETH_ALEN), pattrib->dst,
> ETH_ALEN);
> drivers/staging/rtl8712/os_intfs.c:398: memcpy(pnetdev->dev_addr,
> padapter->eeprompriv.mac_addr, ETH_ALEN);
> drivers/staging/rtl8712/os_intfs.c:414: memcpy(padapter->eeprompriv.mac_addr,
> pnetdev->dev_addr, ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_ioctl_linux.c:107: memcpy(wrqu.ap_addr.sa_data, pmlmepriv->cur_network.network.MacAddress,
> ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_ioctl_linux.c:838: memcpy(psecuritypriv->PMKIDList[psecuritypriv->
> PMKIDIndex].Bssid, strIssueBssid, ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_xmit.c:489: memcpy(pwlanhdr->addr1, get_bssid(pmlmepriv),
> ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_xmit.c:496: memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv),
> ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_xmit.c:503: memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
> ETH_ALEN);
> drivers/staging/rtl8712/rtl871x_xmit.c:507: memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv),
> ETH_ALEN);
> drivers/staging/rtl8192e/rtllib_softmac_wx.c:125: memcpy(wrqu->ap_addr.sa_data,
> ieee->current_network.bssid, ETH_ALEN);
> drivers/staging/rtl8192e/rtllib_tx.c:697: memcpy(&header.addr1, ieee->current_network.bssid,
> ETH_ALEN);
> drivers/staging/rtl8192e/rtllib_tx.c:700: memcpy(&header.addr3,
> ieee->current_network.bssid, ETH_ALEN);
> drivers/staging/rtl8192e/rtllib_tx.c:709: memcpy(&header.addr3, ieee->current_network.bssid,
> ETH_ALEN);
> drivers/staging/rtl8192e/rtllib_softmac.c:3748: memcpy(wrqu.ap_addr.sa_data, ieee->current_network.bssid,
> ETH_ALEN);
> drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c:126: memcpy(wrqu->ap_addr.sa_data,
> ieee->current_network.bssid, ETH_ALEN);
> drivers/staging/slicoss/slicoss.c:567: memcpy(adapter->currmacaddr, adapter->macaddr,
> ETH_ALEN);
> drivers/staging/slicoss/slicoss.c:569: memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
> ETH_ALEN);
> drivers/staging/rtl8723au/hal/usb_halinit.c:1020: memcpy(pEEPROM->mac_addr, &hwinfo[EEPROM_MAC_ADDR_8723AU],
> ETH_ALEN);
> drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:327: memcpy(pwlanhdr->addr1,
> get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
> drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:328: memcpy(pwlanhdr->addr2, myid(&padapter->eeprompriv),
> ETH_ALEN);
> drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:335: memcpy(pwlanhdr->addr2,
> get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
> drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:336: memcpy(pwlanhdr->addr3, myid(&padapter->eeprompriv),
> ETH_ALEN);
> drivers/staging/rtl8723au/hal/rtl8723a_cmd.c:342: memcpy(pwlanhdr->addr3,
> get_my_bssid23a(&pmlmeinfo->network), ETH_ALEN);
> drivers/scsi/fcoe/fcoe_ctlr.c:945: memcpy(fcf->fcf_mac,
> ((struct fip_mac_desc *)desc)->fd_mac,
> drivers/scsi/fcoe/fcoe_ctlr.c:1198: memcpy(granted_mac,
> ((struct fip_mac_desc *)desc)->fd_mac,
> drivers/scsi/fcoe/fcoe_ctlr.c:1204: memcpy(sel->fcoe_mac,
> ((struct fip_mac_desc *)desc)->fd_mac,
> drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1187: memcpy(ctlr->ctl_src_addr, ha->addr,
> ETH_ALEN);
> drivers/net/ethernet/emulex/benet/be_cmds.c:3014: memcpy(mac, resp->macid_macaddr.mac_addr_id.macaddr,
> ETH_ALEN);
> drivers/net/ethernet/emulex/benet/be_cmds.c:3043: memcpy(mac, resp->macaddr_list[0].mac_addr_id.macaddr,
> ETH_ALEN);
> drivers/net/ethernet/neterion/vxge/vxge-main.c:4632: memcpy((u8 *)vdev->vpaths[j].macaddr,
> ll_config->device_hw_info.mac_addrs[i],
> drivers/net/ethernet/i825xx/sun3_82586.c:538: memcpy((char *) mc_cmd->mc_list[i++],
> ha->addr, ETH_ALEN);
> drivers/net/ethernet/intel/e100.c:1600: memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
> ETH_ALEN);
> drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1169: memcpy(vfres->vsi_res[i].default_mac_addr,
> vf->default_lan_addr.addr, ETH_ALEN);
> drivers/net/ethernet/intel/i40evf/i40e_common.c:615: memcpy(hw->mac.perm_addr, vsi_res->default_mac_addr,
> ETH_ALEN);
> drivers/net/ethernet/intel/i40evf/i40e_common.c:616: memcpy(hw->mac.addr, vsi_res->default_mac_addr,
> ETH_ALEN);
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:3522: memcpy(iscsi_stat->mac_local + MAC_PAD, bp->cnic_eth_dev.iscsi_mac,
> ETH_ALEN);
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:380: memcpy(bp->dev->dev_addr,
> bp->acquire_resp.resc.current_mac_addr,
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:757: memcpy(req->filters[0].mac, bp->dev->dev_addr,
> ETH_ALEN);
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:1222: memcpy(resc->current_mac_addr, bulletin->mac,
> ETH_ALEN);
> drivers/net/ethernet/toshiba/ps3_gelic_wireless.c:1162: memcpy(wl->bssid, data->ap_addr.sa_data,
> ETH_ALEN);
> drivers/net/ethernet/toshiba/ps3_gelic_wireless.c:1188: memcpy(data->ap_addr.sa_data, wl->active_bssid,
> ETH_ALEN);
> drivers/net/ethernet/micrel/ksz884x.c:4076: memcpy(hw->override_addr, DEFAULT_MAC_ADDRESS,
> ETH_ALEN);
> drivers/net/ethernet/micrel/ksz884x.c:7091: memcpy(dev->dev_addr, hw_priv->hw.override_addr,
> ETH_ALEN);
> drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1152: memcpy(rxf->ucast_active_mac.addr,
> rxf->ucast_pending_mac->addr, ETH_ALEN);
> drivers/net/ethernet/brocade/bna/bnad.c:1865: memcpy(&mc_list[i * ETH_ALEN], &mc_addr->addr[0],
> ETH_ALEN);
> drivers/net/ethernet/brocade/bna/bnad.c:3143: memcpy(&mac_list[entry * ETH_ALEN],
> &ha->addr[0], ETH_ALEN);
> drivers/net/ethernet/atheros/atlx/atl1.c:3132: memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
> ETH_ALEN);
> drivers/net/ethernet/chelsio/cxgb3/t3_hw.c:3726: memcpy(adapter->port[i]->dev_addr, hw_addr,
> ETH_ALEN);
> drivers/net/ethernet/mellanox/mlx4/mcg.c:847: memcpy(rule_hw->eth.dst_mac_msk, spec->eth.dst_mac_msk,
> ETH_ALEN);
> drivers/net/ethernet/mellanox/mlx4/mcg.c:849: memcpy(rule_hw->eth.src_mac_msk, spec->eth.src_mac_msk,
> ETH_ALEN);
> drivers/net/ethernet/ti/cpsw.c:2112: memcpy(priv_sl2->mac_addr, data->slave_data[1].mac_addr,
> ETH_ALEN);
> drivers/net/ethernet/sun/sunvnet.c:1532: memcpy(&info.mcast_addr[n_addrs * ETH_ALEN],
> m->addr, ETH_ALEN);
> drivers/net/ethernet/sun/sunvnet.c:1557: memcpy(&info.mcast_addr[n_addrs * ETH_ALEN],
> m->addr, ETH_ALEN);
> drivers/net/vmxnet3/vmxnet3_drv.c:2033: memcpy(buf + i++ * ETH_ALEN, ha->addr,
> ETH_ALEN);
> drivers/net/wireless/cw1200/txrx.c:1039: memcpy(&priv->action_frame_sa[0],
> ieee80211_get_SA(frame), ETH_ALEN);
> drivers/net/wireless/cw1200/txrx.c:1051: memcpy(&priv->action_frame_sa[0],
> ieee80211_get_SA(frame), ETH_ALEN);
> drivers/net/wireless/cw1200/txrx.c:1410: memcpy(map_link.mac_addr, priv->link_id_db[i].mac,
> ETH_ALEN);
> drivers/net/wireless/cw1200/txrx.c:1448: memcpy(map_link.mac_addr,
> priv->link_id_db[i].mac,
> drivers/net/wireless/cw1200/sta.c:558: memcpy(&priv->multicast_filter.macaddrs[count],
> ha->addr, ETH_ALEN);
> drivers/net/wireless/cw1200/sta.c:725: memcpy(wsm_key->wep_pairwise.peer,
> peer_addr, ETH_ALEN);
> drivers/net/wireless/cw1200/sta.c:741: memcpy(wsm_key->tkip_pairwise.peer,
> peer_addr, ETH_ALEN);
> drivers/net/wireless/cw1200/sta.c:774: memcpy(wsm_key->aes_pairwise.peer,
> peer_addr, ETH_ALEN);
> drivers/net/wireless/cw1200/sta.c:796: memcpy(wsm_key->wapi_pairwise.peer,
> peer_addr, ETH_ALEN);
> drivers/net/wireless/prism54/isl_ioctl.c:2491: memcpy(priv->ndev->dev_addr,
> &((struct sockaddr *) addr)->sa_data, ETH_ALEN);
> drivers/net/wireless/iwlwifi/dvm/main.c:1317: memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
> ETH_ALEN);
> drivers/net/wireless/iwlwifi/mvm/mac80211.c:501: memcpy(mvm->addresses[i].addr, mvm->addresses[i-1].addr,
> ETH_ALEN);
> drivers/net/wireless/iwlwifi/mvm/mac80211.c:1812: memcpy(&cmd->addr_list[cmd->count * ETH_ALEN],
> addr->addr, ETH_ALEN);
> drivers/net/wireless/iwlwifi/mvm/power.c:508: memcpy(mvmvif->uapsd_misbehaving_bssid, vif->bss_conf.bssid,
> ETH_ALEN);
> drivers/net/wireless/iwlegacy/common.c:5471: memcpy(il->staging.bssid_addr, bss_conf->bssid,
> ETH_ALEN);
> drivers/net/wireless/rsi/rsi_91x_mgmt.c:1281: memcpy(common->mac_addr,
> &msg[offset],
> drivers/net/wireless/rsi/rsi_91x_mgmt.c:1282: memcpy(&common->fw_ver,
> &msg[offset + ETH_ALEN],
> drivers/net/wireless/wl3501_cs.c:876: memcpy(this->bssid,
> this->bss_set[i].bssid, ETH_ALEN);
> drivers/net/wireless/ath/ath10k/wmi.c:4128: memcpy(&bssids->bssid_list[i],
> arg->bssids[i].bssid,
> drivers/net/wireless/ath/wcn36xx/smd.c:1059: memcpy(&msg_body.bss_params.bssid,
> &orig->bss_params.bssid, ETH_ALEN);
> drivers/net/wireless/ath/wcn36xx/smd.c:1060: memcpy(&msg_body.bss_params.self_mac_addr,
> &orig->bss_params.self_mac_addr, ETH_ALEN);
> drivers/net/wireless/ipw2x00/ipw2200.c:4517: memcpy(priv->ieee->bssid,
> priv->bssid, ETH_ALEN);
> drivers/net/wireless/ipw2x00/ipw2200.c:4521: memcpy(priv->ieee->bssid,
> priv->bssid, ETH_ALEN);
> drivers/net/wireless/ipw2x00/ipw2100.c:4728: memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
> ETH_ALEN);
> drivers/net/wireless/mwl8k.c:3970: memcpy(&cmd->create_params.peer_mac_addr[0], stream->sta->addr,
> ETH_ALEN);
> drivers/net/wireless/hostap/hostap_80211_tx.c:180: memcpy(&hdr.addr1, iface->u.wds.remote_addr,
> ETH_ALEN);
> drivers/net/wireless/hostap/hostap_80211_tx.c:195: memcpy(&hdr.addr1, to_assoc_ap ?
> local->assoc_ap_addr : local->bssid, ETH_ALEN);
> drivers/net/wireless/rtlwifi/cam.c:305: memcpy(rtlpriv->sec.hwsec_cam_sta_addr[entry_idx],
> sta_addr, ETH_ALEN);
> drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c:3181: memcpy(&cfg->pmk_list->pmkids.pmkid[i].BSSID,
> &cfg->pmk_list->pmkids.pmkid[i + 1].BSSID,
> drivers/net/wireless/airo.c:3657: memcpy(&micbuf,
> ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2,
> drivers/net/wireless/airo.c:3667: memcpy(buffer + ETH_ALEN * 2,
> ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off,
> drivers/net/wireless/airo.c:7189: memcpy(address[i].sa_data,
> status_rid.bssid[i], ETH_ALEN);
> drivers/net/wireless/libertas/cmd.c:156: memcpy(priv->mesh_dev->dev_addr,
> priv->current_addr, ETH_ALEN);
> drivers/net/wireless/rndis_wlan.c:1630: memcpy(mc_addrs + i++ * ETH_ALEN,
> ha->addr, ETH_ALEN);
> drivers/net/wireless/ti/wl1251/main.c:757: memcpy(fp->mc_list[fp->mc_list_length],
> ha->addr, ETH_ALEN);
> drivers/net/wireless/ti/wlcore/main.c:3169: memcpy(fp->mc_list[fp->mc_list_length],
> ha->addr, ETH_ALEN);
> drivers/net/wireless/mwifiex/sta_cmdresp.c:845: memcpy(priv->curr_bss_params.bss_descriptor.mac_address,
> ibss_coal_resp->bssid, ETH_ALEN);
> drivers/net/wireless/mwifiex/sta_rx.c:251: memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/uap_event.c:132: memcpy(priv->netdev->dev_addr, adapter->event_body + 2,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/cfg80211.c:2881: memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/cfg80211.c:2891: memcpy(mef_entry->filter[filt_num].byte_seq, priv->curr_addr,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/sta_cmd.c:411: memcpy(cmd->params.mac_addr.mac_addr, priv->curr_addr,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/sta_cmd.c:437: memcpy(mcast_addr->mac_list, mcast_list->mac_list,
> mcast_list->num_multicast_addr * ETH_ALEN);
> drivers/net/wireless/mwifiex/11n_rxreorder.c:483: memcpy(add_ba_rsp->peer_mac_addr, cmd_addba_req->peer_mac_addr,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/sta_event.c:118: memcpy(priv->prev_bssid,
> priv->curr_bss_params.bss_descriptor.mac_address, ETH_ALEN);
> drivers/net/wireless/mwifiex/scan.c:873: memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid,
> ETH_ALEN);
> drivers/net/wireless/mwifiex/join.c:1092: memcpy(&adhoc_join->bss_descriptor.bssid,
> &bss_desc->mac_address, ETH_ALEN);
> drivers/net/wireless/mwifiex/join.c:1231: memcpy(bss_desc->mac_address,
> adhoc_result->bssid, ETH_ALEN);
> drivers/net/wireless/mwifiex/join.c:1390: memcpy(mac_address,
> priv->curr_bss_params.bss_descriptor.mac_address,
> drivers/net/wireless/libertas_tf/cmd.c:333: memcpy(cmd.maclist, priv->multicastlist,
> priv->nr_of_multicastmacaddr * ETH_ALEN);
> drivers/net/wireless/libertas_tf/main.c:284: memcpy(txpd->tx_dest_addr_high, skb->data + sizeof(struct txpd) + 4,
> ETH_ALEN);
> drivers/net/usb/lg-vl600.c:197: memcpy(ethhdr->h_source,
> &buf->data[sizeof(*ethhdr) + 0x8],
> drivers/net/usb/lg-vl600.c:198: memcpy(ethhdr->h_dest,
> &buf->data[sizeof(*ethhdr) + 0x12],
> drivers/s390/net/qeth_l3_main.c:1489: memcpy(card->dev->dev_addr,
> cmd->data.create_destroy_addr.unique_id, ETH_ALEN);
> drivers/infiniband/hw/mlx4/main.c:869: memcpy(mlx4_spec->eth.dst_mac, ib_spec->eth.val.dst_mac,
> ETH_ALEN);
> drivers/infiniband/hw/mlx4/main.c:870: memcpy(mlx4_spec->eth.dst_mac_msk, ib_spec->eth.mask.dst_mac,
> ETH_ALEN);
> net/ethernet/eth.c:253: memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
> haddr, ETH_ALEN);
> net/mac80211/mlme.c:701: memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
> ETH_ALEN);
> net/mac80211/iface.c:563: memcpy(dev->dev_addr,
> local->hw.wiphy->perm_addr,
> net/mac80211/iface.c:1582: memcpy(perm_addr,
> local->hw.wiphy->addresses[i].addr,
> net/wireless/nl80211.c:9033: memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]),
> ETH_ALEN);
> net/wireless/wext-spy.c:57: memcpy(spydata->spy_address[i], address[i].sa_data,
> ETH_ALEN);
> net/bluetooth/bnep/core.c:387: memcpy(__skb_put(nskb, ETH_ALEN), skb_mac_header(skb),
> ETH_ALEN);
> net/bluetooth/bnep/core.c:388: memcpy(__skb_put(nskb, ETH_ALEN + 2), s->eh.h_source,
> ETH_ALEN + 2);
> net/bluetooth/bnep/core.c:392: memcpy(__skb_put(nskb, ETH_ALEN * 2), skb_mac_header(skb),
> ETH_ALEN * 2);
>
>
>
>
On Tue, 2015-04-21 at 23:44 +0200, Mateusz Kulikowski wrote:
> On 21.04.2015 23:22, Joe Perches wrote:
> > On Tue, 2015-04-21 at 22:57 +0200, Mateusz Kulikowski wrote:
> (...)
> >>
> >> Perhaps it would be smarter to use (for both patches) $stat instead.
> >> This applies also to existing checks (like PREFER_ETHER_ADDR_COPY)
> >> so we can catch calls formatted like
> >>
> >> memset(very.long.structure->something.something_different42,
> >> 0xFF, ETH_ALEN);
> >
> > Yes, likely that's true.
> >
> > checkpatch couldn't --fix it easily unless it's on a
> > single line though.
>
> True, True; If you prefer $line and ability to --fix - I'll use that in v3
I suppose you could do both $line and $stat
and the fix would only work when it's on a
single line.
Perhaps something like this would work:
if ($line =~ /whatever/ ||
(defined($stat) && $stat =~ /whatever/)) {
if (WARN(...) &&
$fix) {
fixed[$fixlinenr] =~ s/whatever/appropriate/;
}
}
No worries about getting 'round the the list.
It'll get got eventually.
On 22.04.2015 00:27, Joe Perches wrote:
> On Tue, 2015-04-21 at 23:44 +0200, Mateusz Kulikowski wrote:
>> On 21.04.2015 23:22, Joe Perches wrote:
>>> On Tue, 2015-04-21 at 22:57 +0200, Mateusz Kulikowski wrote:
>> (...)
(...)
>> True, True; If you prefer $line and ability to --fix - I'll use that in v3
>
> I suppose you could do both $line and $stat
> and the fix would only work when it's on a
> single line.
>
> Perhaps something like this would work:
>
> if ($line =~ /whatever/ ||
> (defined($stat) && $stat =~ /whatever/)) {
> if (WARN(...) &&
> $fix) {
> fixed[$fixlinenr] =~ s/whatever/appropriate/;
> }
> }
Isn't it enough to just match $stat and do fix for line (that in
some cases will just not match)?
One more thing
I noticed funny behavior about $stat matches -
it reports the same error several times (including as "scope" whole file)
Is it feature or "feature" or I missed something?
Ex. file:
-------------- cut
int foo(void)
{
baz();
memset(a, b, 0);
bar();
}
-------------- cut
Output of (@master)
-------------- cut
$ scripts/checkpatch.pl -f test42.c --types MEMSET
ERROR: memset to 0's uses 0 as the 2nd argument, not the 3rd
#1: FILE: test42.c:1:
+int foo(void)
{
baz();
memset(a, b, 0);
bar();
}
ERROR: memset to 0's uses 0 as the 2nd argument, not the 3rd
#2: FILE: test42.c:2:
+{
baz();
memset(a, b, 0);
bar();
}
ERROR: memset to 0's uses 0 as the 2nd argument, not the 3rd
#4: FILE: test42.c:4:
+memset(a, b, 0);
total: 3 errors, 0 warnings, 6 lines checked
NOTE: Used message types: MEMSET
test42.c has style problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
--------------cut
Regards,
Mateusz
On Thu, 2015-04-23 at 21:53 +0200, Mateusz Kulikowski wrote:
> On 22.04.2015 00:27, Joe Perches wrote:
> > On Tue, 2015-04-21 at 23:44 +0200, Mateusz Kulikowski wrote:
> >> On 21.04.2015 23:22, Joe Perches wrote:
> >>> On Tue, 2015-04-21 at 22:57 +0200, Mateusz Kulikowski wrote:
> >> (...)
> (...)
> >> True, True; If you prefer $line and ability to --fix - I'll use that in v3
> >
> > I suppose you could do both $line and $stat
> > and the fix would only work when it's on a
> > single line.
> >
> > Perhaps something like this would work:
> >
> > if ($line =~ /whatever/ ||
> > (defined($stat) && $stat =~ /whatever/)) {
> > if (WARN(...) &&
> > $fix) {
> > fixed[$fixlinenr] =~ s/whatever/appropriate/;
> > }
> > }
>
> Isn't it enough to just match $stat and do fix for line (that in
> some cases will just not match)?
Yeah, that'd work too.
> One more thing
> I noticed funny behavior about $stat matches -
> it reports the same error several times (including as "scope" whole file)
> Is it feature or "feature" or I missed something?
You have to make sure the first character of $stat is a +
if ($stat =~ /\+(?:.*)\bmem<foo>
On Thu, 2015-04-23 at 16:54 -0700, Joe Perches wrote:
> On Thu, 2015-04-23 at 21:53 +0200, Mateusz Kulikowski wrote:
> > I noticed funny behavior about $stat matches -
> > it reports the same error several times (including as "scope" whole file)
> > Is it feature or "feature" or I missed something?
>
> You have to make sure the first character of $stat is a +
>
> if ($stat =~ /\+(?:.*)\bmem<foo>
Make that
if ($stat =~ /^\+(?:.*)\bmem<foo>