Don't do clock-mode-select if clk == NULL,
since when building without CONFIG_HAVE_CLK,
clk_get returns NULL and clk_get_rate returns 0.
Doing clock-mode-select in this cause causes kszphy_probe to
return -EINVAL and thus prevents the device from being probed.
The original code (before regression) would return 0
when building without CONFIG_HAVE_CLK.
Cc: stable <[email protected]> # 3.18+
1fadee0c3645 ("net/phy: micrel: Add clock support for
KSZ8021/KSZ8031")
Signed-off-by: Niklas Cassel <[email protected]>
---
drivers/net/phy/micrel.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 1190fd8..ebdc357 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -548,7 +548,8 @@ static int kszphy_probe(struct phy_device *phydev)
}
clk = devm_clk_get(&phydev->dev, "rmii-ref");
- if (!IS_ERR(clk)) {
+ /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
+ if (!IS_ERR_OR_NULL(clk)) {
unsigned long rate = clk_get_rate(clk);
bool rmii_ref_clk_sel_25_mhz;
--
2.1.4
On Mon, May 11, 2015 at 12:21 PM, Niklas Cassel <[email protected]> wrote:
> Don't do clock-mode-select if clk == NULL,
> since when building without CONFIG_HAVE_CLK,
> clk_get returns NULL and clk_get_rate returns 0.
>
> Doing clock-mode-select in this cause causes kszphy_probe to
> return -EINVAL and thus prevents the device from being probed.
>
> The original code (before regression) would return 0
> when building without CONFIG_HAVE_CLK.
>
> Cc: stable <[email protected]> # 3.18+
> 1fadee0c3645 ("net/phy: micrel: Add clock support for
> KSZ8021/KSZ8031")
> Signed-off-by: Niklas Cassel <[email protected]>
Looks good now:
Reviewed-by: Fabio Estevam <[email protected]>
On Mon, May 11, 2015 at 05:21:06PM +0200, Niklas Cassel wrote:
> Don't do clock-mode-select if clk == NULL,
> since when building without CONFIG_HAVE_CLK,
> clk_get returns NULL and clk_get_rate returns 0.
>
> Doing clock-mode-select in this cause causes kszphy_probe to
> return -EINVAL and thus prevents the device from being probed.
>
> The original code (before regression) would return 0
> when building without CONFIG_HAVE_CLK.
>
> Cc: stable <[email protected]> # 3.18+
> 1fadee0c3645 ("net/phy: micrel: Add clock support for
> KSZ8021/KSZ8031")
Looks like you forgot the "Fixes: " tag itself when updating.
> Signed-off-by: Niklas Cassel <[email protected]>
Look good otherwise, feel free to add my
Reviewed-by: Johan Hovold <[email protected]>
when resending (unless David wants to fix it up himself).
Thanks,
Johan