dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
not an 'unsigned int', and gcc correctly warns about broken
code in the mtk_init_fq_dma function:
drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
This changes the type of the local variable to dma_addr_t.
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index ba3afa5d4640..3e42204adfe5 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -453,7 +453,7 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
/* the qdma core needs scratch memory to be setup */
static int mtk_init_fq_dma(struct mtk_eth *eth)
{
- unsigned int phy_ring_head, phy_ring_tail;
+ dma_addr_t phy_ring_head, phy_ring_tail;
int cnt = MTK_DMA_SIZE;
dma_addr_t dma_addr;
int i;
--
2.7.0
Device drivers should not mess with the DMA mask directly,
but instead call dma_set_mask() etc if needed.
In case of the mtk_eth_soc driver, the mask already gets set
correctly when the device is created, and setting it again
is against the documented API.
This removes the incorrect setting.
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 3e42204adfe5..87f417712da0 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1676,9 +1676,6 @@ static int mtk_probe(struct platform_device *pdev)
struct mtk_eth *eth;
int err;
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
-
device_reset(&pdev->dev);
match = of_match_device(of_mtk_match, &pdev->dev);
--
2.7.0
The device_reset() function may fail, so we have to check
its return value, e.g. to make deferred probing work correctly.
gcc warns about it because of the warn_unused_result attribute:
drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_probe':
drivers/net/ethernet/mediatek/mtk_eth_soc.c:1679:2: error: ignoring return value of 'device_reset', declared with attribute warn_unused_result [-Werror=unused-result]
This adds the trivial error check to propagate the return value
to the generic platform device probe code.
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 87f417712da0..1e6c5498bba9 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1676,7 +1676,9 @@ static int mtk_probe(struct platform_device *pdev)
struct mtk_eth *eth;
int err;
- device_reset(&pdev->dev);
+ err = device_reset(&pdev->dev);
+ if (err)
+ return err;
match = of_match_device(of_mtk_match, &pdev->dev);
soc = (struct mtk_soc_data *)match->data;
--
2.7.0
From: Arnd Bergmann <[email protected]>
Date: Mon, 14 Mar 2016 15:07:10 +0100
> dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
> not an 'unsigned int', and gcc correctly warns about broken
> code in the mtk_init_fq_dma function:
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
> drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
>
> This changes the type of the local variable to dma_addr_t.
>
> Signed-off-by: Arnd Bergmann <[email protected]>
Applied.
From: Arnd Bergmann <[email protected]>
Date: Mon, 14 Mar 2016 15:07:11 +0100
> Device drivers should not mess with the DMA mask directly,
> but instead call dma_set_mask() etc if needed.
>
> In case of the mtk_eth_soc driver, the mask already gets set
> correctly when the device is created, and setting it again
> is against the documented API.
>
> This removes the incorrect setting.
>
> Signed-off-by: Arnd Bergmann <[email protected]>
Applied.
From: Arnd Bergmann <[email protected]>
Date: Mon, 14 Mar 2016 15:07:12 +0100
> The device_reset() function may fail, so we have to check
> its return value, e.g. to make deferred probing work correctly.
> gcc warns about it because of the warn_unused_result attribute:
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_probe':
> drivers/net/ethernet/mediatek/mtk_eth_soc.c:1679:2: error: ignoring return value of 'device_reset', declared with attribute warn_unused_result [-Werror=unused-result]
>
> This adds the trivial error check to propagate the return value
> to the generic platform device probe code.
>
> Signed-off-by: Arnd Bergmann <[email protected]>
Applied.
On 14/03/2016 15:07, Arnd Bergmann wrote:
> dma_alloc_coherent() expects a dma_addr_t pointer as its argument,
> not an 'unsigned int', and gcc correctly warns about broken
> code in the mtk_init_fq_dma function:
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c: In function 'mtk_init_fq_dma':
> drivers/net/ethernet/mediatek/mtk_eth_soc.c:463:13: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
>
> This changes the type of the local variable to dma_addr_t.
>
> Signed-off-by: Arnd Bergmann <[email protected]>
thanks for the fixes
> ---
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index ba3afa5d4640..3e42204adfe5 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -453,7 +453,7 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
> /* the qdma core needs scratch memory to be setup */
> static int mtk_init_fq_dma(struct mtk_eth *eth)
> {
> - unsigned int phy_ring_head, phy_ring_tail;
> + dma_addr_t phy_ring_head, phy_ring_tail;
> int cnt = MTK_DMA_SIZE;
> dma_addr_t dma_addr;
> int i;
>