We found the following warning when using W=1 to build kernel:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, coe = priv->hw->rx_csum;
When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
dwxgmac2_get_rx_header_len() return 0 only, without any error code to
report. Therefore, it's better to define get_rx_header_len() as void.
Signed-off-by: Luo Jiaxing <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 3 +--
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 3 +--
drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 ++--
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
4 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index eff8206..c6540b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -494,10 +494,9 @@ static void dwmac4_set_vlan(struct dma_desc *p, u32 type)
p->des2 |= cpu_to_le32(type & TDES2_VLAN_TAG_MASK);
}
-static int dwmac4_get_rx_header_len(struct dma_desc *p, unsigned int *len)
+static void dwmac4_get_rx_header_len(struct dma_desc *p, unsigned int *len)
{
*len = le32_to_cpu(p->des2) & RDES2_HL;
- return 0;
}
static void dwmac4_set_sec_addr(struct dma_desc *p, dma_addr_t addr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
index c3d654c..0aaf19a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
@@ -286,11 +286,10 @@ static int dwxgmac2_get_rx_hash(struct dma_desc *p, u32 *hash,
return -EINVAL;
}
-static int dwxgmac2_get_rx_header_len(struct dma_desc *p, unsigned int *len)
+static void dwxgmac2_get_rx_header_len(struct dma_desc *p, unsigned int *len)
{
if (le32_to_cpu(p->des3) & XGMAC_RDES3_L34T)
*len = le32_to_cpu(p->des2) & XGMAC_RDES2_HL;
- return 0;
}
static void dwxgmac2_set_sec_addr(struct dma_desc *p, dma_addr_t addr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index ffe2d63..e2dca9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -90,7 +90,7 @@ struct stmmac_desc_ops {
/* RSS */
int (*get_rx_hash)(struct dma_desc *p, u32 *hash,
enum pkt_hash_types *type);
- int (*get_rx_header_len)(struct dma_desc *p, unsigned int *len);
+ void (*get_rx_header_len)(struct dma_desc *p, unsigned int *len);
void (*set_sec_addr)(struct dma_desc *p, dma_addr_t addr);
void (*set_sarc)(struct dma_desc *p, u32 sarc_type);
void (*set_vlan_tag)(struct dma_desc *p, u16 tag, u16 inner_tag,
@@ -150,7 +150,7 @@ struct stmmac_desc_ops {
#define stmmac_get_rx_hash(__priv, __args...) \
stmmac_do_callback(__priv, desc, get_rx_hash, __args)
#define stmmac_get_rx_header_len(__priv, __args...) \
- stmmac_do_callback(__priv, desc, get_rx_header_len, __args)
+ stmmac_do_void_callback(__priv, desc, get_rx_header_len, __args)
#define stmmac_set_desc_sec_addr(__priv, __args...) \
stmmac_do_void_callback(__priv, desc, set_sec_addr, __args)
#define stmmac_set_desc_sarc(__priv, __args...) \
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 89b2b34..7e95412 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3631,15 +3631,15 @@ static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
struct dma_desc *p,
int status, unsigned int len)
{
- int ret, coe = priv->hw->rx_csum;
unsigned int plen = 0, hlen = 0;
+ int coe = priv->hw->rx_csum;
/* Not first descriptor, buffer is always zero */
if (priv->sph && len)
return 0;
/* First descriptor, get split header length */
- ret = stmmac_get_rx_header_len(priv, p, &hlen);
+ stmmac_get_rx_header_len(priv, p, &hlen);
if (priv->sph && hlen) {
priv->xstats.rx_split_hdr_pkt_n++;
return hlen;
--
2.7.4
On Fri, 11 Sep 2020 11:55:58 +0800 Luo Jiaxing wrote:
> We found the following warning when using W=1 to build kernel:
>
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
> int ret, coe = priv->hw->rx_csum;
>
> When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
> dwxgmac2_get_rx_header_len() return 0 only, without any error code to
> report. Therefore, it's better to define get_rx_header_len() as void.
>
> Signed-off-by: Luo Jiaxing <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
From: Luo Jiaxing <[email protected]>
Date: Fri, 11 Sep 2020 11:55:58 +0800
> We found the following warning when using W=1 to build kernel:
>
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ?ret? set but not used [-Wunused-but-set-variable]
> int ret, coe = priv->hw->rx_csum;
>
> When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
> dwxgmac2_get_rx_header_len() return 0 only, without any error code to
> report. Therefore, it's better to define get_rx_header_len() as void.
>
> Signed-off-by: Luo Jiaxing <[email protected]>
Applied, thank you.