This series patches refine pci-imx6 driver and do the following main changes.
- Encapsulate the clock enable into one standalone function
- Add the error propagation from host_init and resume
- Turn off regulator when the system is in suspend mode
- Let the probe successfully when link never comes up
- Do not hide the phy driver callbacks in core reset and clk_enable.
- Keep symmetric as much as possible between suspend and resume callbacks.
BTW, this series are verified on i.MX8MM EVK board when one NVME is used.
Main changes from v14 to v15 refer to Lucas' comments and Bjorn's suggestions:
Only the five patches listed below have changes.
10/17
- Remove regulator_disable() from imx6_pcie_shutdown() and update the commit
log accordingly refer to Lucas' comments.
11/17
- Move the regulator enable before the PHY init and core reset assert to
avoid introducing more failure cleanup paths refer to Lucas' comments.
14/17 has the codes conflictions.
- Rebase the 14/17 patch because of the codes conflictions introduced by
previous 11/17 new changes.
16/17
- Add the missing the IMX8MQ case and drop the default case in
imx6_pcie_ltssm_disable() refer to Lucas' comments.
17/17
- Rebase the codes and resolve the codes conflictions introduced by
previous 11/17 new changes.
- Correct one failure cleanup in imx6_pcie_host_init().
Main changes from v13 to v14 refer to Bjorn's comments:
- To keep suspend/resume symmetric as much as possible. Create
imx6_pcie_stop_link() and imx6_pcie_host_exit() functions, and invoke
them in suspend callback.
- Since the imx6_pcie_clk_disable() is invoked by imx6_pcie_host_exit(),
to be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
Main changes from v12 to v13:
- Call imx6_pcie_host_init() instead of duplicating codes in resume.
- Move the regulator enable out of imx6_pcie_deassert_core_reset().
Re-format the error handling in imx6_pcie_deassert_core_reset()
and imx6_pcie_host_init() accordingly.
Main changes from v11 to v12 issued by Bjorn:
- Add four intro patches to move code around to collect similar things
(PHY management, reset management) together. This makes the first
diff to collect clock enables simpler because it's not cluttered with
unrelated things that didn't actually change.
- Factor out ref clock disables so the disable function structure matches
the enable structure.
- Drop unused "ret" from "Reduce resume time ..." to avoid bisection
hole, then add it back in "Do not hide phy driver ..." where we start
using it again.
- Add patch to make imx6_pcie_clk_disable() symmetric with
imx6_pcie_clk_enable() in terms of enable/disable ordering.
Main changes from v10 to v11:
No code changes, just do the following operations refer to Bjorn's comments.
- Split #6 patch into two patches.
- Rebase to v5.19-rc1 based on for-next branch of Shawn's git.
Main changes from v9 to v10:
- Add the "Reviewed-by: Lucas Stach <[email protected]>" tag into #3
and #4 patches.
- Refer to Bjorn's comments:
- refine the commit of the first patch
- keep alignment of the message format in the second patch
- More specific commit and subject of the #5 and #7 patches.
- Move the regualtor_disable into suspend, turn off the regulator when bus
is powered off and system in suspend mode.
- Let the driver probe successfully, return zero in imx6_pcie_start_link()
when PCIe link is down.
In this link down scenario, only start the PCIe link training in resume
when the link is up before system suspend to avoid the long latency in
the link training period.
- Don't hide phy driver callbacks in core reset and clk_enable, and refine
the error handling accordingly.
- Drop the #8 patch of v9 series, since the clocks and powers are not gated
off anymore when link is down.
Main changes from v8 to v9:
- Don't change pcie-designware codes, and do the error exit process only in
pci-imx6 driver internally.
- Move the phy driver callbacks to the proper places
Main changes from v7 to v8:
Regarding Bjorn's review comments.
- Align the format of the dev_info message and refine commit log of
#6/7/8 patches.
- Rename the err_reset_phy label, since there is no PHY reset in the out
Main changes from v6 to v7:
- Keep the regulator usage counter balance in the #5 patch of v6 series.
Main changes from v5 to v6:
- Refer to the following discussion with Fabio, fix the dump by his patch.
https://patchwork.kernel.org/project/linux-pci/patch/[email protected]/
Refine and rebase this patch-set after Fabio' dump fix patch is merged.
- Add one new #4 patch to disable i.MX6QDL REF clock too when disable clocks
- Split the regulator refine codes into one standalone patch #5 in this version.
Main changes from v4 to v5:
- Since i.MX8MM PCIe support had been merged. Based on Lorenzo's git repos,
resend the patch-set after rebase.
Main changes from v3 to v4:
- Regarding Mark's comments, delete the regulator_is_enabled() check.
- Squash #3 and #6 of v3 patch into #5 patch of v4 set.
Main changes from v2 to v3:
- Add "Reviewed-by: Lucas Stach <[email protected]>" tag into
first two patches.
- Add a Fixes tag into #3 patch.
- Split the #4 of v2 to two patches, one is clock disable codes move,
the other one is the acutal clock unbalance fix.
- Add a new host_exit() callback into dw_pcie_host_ops, then it could be
invoked to handle the unbalance issue in the error handling after
host_init() function when link is down.
- Add a new host_exit() callback for i.MX PCIe driver to handle this case
in the error handling after host_init.
Main changes from v1 to v2:
Regarding Lucas' comments.
- Move the placement of the new imx6_pcie_clk_enable() to avoid the
forward declarition.
- Seperate the second patch of v1 patch-set to three patches.
- Use the module_param to replace the kernel command line.
Regarding Bjorn's comments:
- Use the cover-letter for a multi-patch series.
- Correct the subject line, and refine the commit logs. For example,
remove the timestamp of the logs.
Bjorn Helgaas (5):
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type()
earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Disable clocks in reverse order of enable
Richard Zhu (12):
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Call host init function directly in resume
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Move regulator enable out of
imx6_pcie_deassert_core_reset()
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Reduce resume time by only starting link if it was up
before suspend
PCI: imx6: Do not hide phy driver callbacks and refine the error
handling
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Reformat suspend callback to keep symmetric with resume
drivers/pci/controller/dwc/pci-imx6.c | 660 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------
1 file changed, 357 insertions(+), 303 deletions(-)
From: Bjorn Helgaas <[email protected]>
The PCIe ref clocks are specific to different variants. The enables are
already split out into imx6_pcie_enable_ref_clk(), but the disables were
combined with the more generic bus/phy/pcie clock disables in
imx6_pcie_clk_disable().
Split out the variant-specific disables into imx6_pcie_disable_ref_clk() to
match imx6_pcie_enable_ref_clk().
No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Acked-by: Richard Zhu <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 38f208eea2d7..f458461880dc 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -580,12 +580,8 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
return ret;
}
-static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
{
- clk_disable_unprepare(imx6_pcie->pcie);
- clk_disable_unprepare(imx6_pcie->pcie_phy);
- clk_disable_unprepare(imx6_pcie->pcie_bus);
-
switch (imx6_pcie->drvdata->variant) {
case IMX6SX:
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
@@ -595,8 +591,8 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
break;
- case IMX8MQ:
case IMX8MM:
+ case IMX8MQ:
clk_disable_unprepare(imx6_pcie->pcie_aux);
break;
default:
@@ -604,6 +600,14 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
}
}
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+ clk_disable_unprepare(imx6_pcie->pcie);
+ clk_disable_unprepare(imx6_pcie->pcie_phy);
+ clk_disable_unprepare(imx6_pcie->pcie_bus);
+ imx6_pcie_disable_ref_clk(imx6_pcie);
+}
+
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct device *dev = imx6_pcie->pci->dev;
--
2.25.1
i.MX PCIe doesn't support hotplug. During resume, only start PCIe link
training when the link was up before system suspend to avoid the long
latency in the link training period.
[bhelgaas: imx6_pcie_start_link() return value check removal moved to
previous patch, pointed out by Lucas Stach <[email protected]>]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 3ac4f2aa91c5..ad0933c3dc70 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -67,6 +67,7 @@ struct imx6_pcie {
struct dw_pcie *pci;
int reset_gpio;
bool gpio_active_high;
+ bool link_is_up;
struct clk *pcie_bus;
struct clk *pcie_phy;
struct clk *pcie_inbound_axi;
@@ -881,11 +882,13 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dev_info(dev, "Link: Gen2 disabled\n");
}
+ imx6_pcie->link_is_up = true;
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
return 0;
err_reset_phy:
+ imx6_pcie->link_is_up = false;
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
@@ -1032,7 +1035,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
return ret;
dw_pcie_setup_rc(pp);
- imx6_pcie_start_link(imx6_pcie->pci);
+ if (imx6_pcie->link_is_up)
+ imx6_pcie_start_link(imx6_pcie->pci);
+
return 0;
}
#endif
--
2.25.1
The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().
Move the regulator_disable to the suspend function, turn off regulator when
the system is in suspend mode.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 2b42c37f1617..95815e4255d3 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -670,8 +670,6 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
{
- struct device *dev = imx6_pcie->pci->dev;
-
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
case IMX8MQ:
@@ -702,14 +700,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
break;
}
- if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
- int ret = regulator_disable(imx6_pcie->vpcie);
-
- if (ret)
- dev_err(dev, "failed to disable vpcie regulator: %d\n",
- ret);
- }
-
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio))
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
@@ -722,7 +712,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
struct device *dev = pci->dev;
int ret;
- if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+ if (imx6_pcie->vpcie) {
ret = regulator_enable(imx6_pcie->vpcie);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -795,7 +785,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return 0;
err_clks:
- if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+ if (imx6_pcie->vpcie) {
ret = regulator_disable(imx6_pcie->vpcie);
if (ret)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1022,6 +1012,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
break;
}
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+
return 0;
}
--
2.25.1
Move regulator enable out of imx6_pcie_deassert_core_reset(), since the
regulator_enable() has nothing to do with imx6_pcie_deassert_core_reset().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 36 ++++++++++++---------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 95815e4255d3..d263574e5c85 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -712,19 +712,10 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
struct device *dev = pci->dev;
int ret;
- if (imx6_pcie->vpcie) {
- ret = regulator_enable(imx6_pcie->vpcie);
- if (ret) {
- dev_err(dev, "failed to enable vpcie regulator: %d\n",
- ret);
- return ret;
- }
- }
-
ret = imx6_pcie_clk_enable(imx6_pcie);
if (ret) {
dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
- goto err_clks;
+ return ret;
}
switch (imx6_pcie->drvdata->variant) {
@@ -783,15 +774,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
return 0;
-
-err_clks:
- if (imx6_pcie->vpcie) {
- ret = regulator_disable(imx6_pcie->vpcie);
- if (ret)
- dev_err(dev, "failed to disable vpcie regulator: %d\n",
- ret);
- }
- return ret;
}
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
@@ -914,17 +896,31 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
int ret;
+ if (imx6_pcie->vpcie) {
+ ret = regulator_enable(imx6_pcie->vpcie);
+ if (ret) {
+ dev_err(dev, "failed to enable vpcie regulator: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
ret = imx6_pcie_deassert_core_reset(imx6_pcie);
if (ret < 0) {
dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
- return ret;
+ goto err_reg_disable;
}
imx6_setup_phy_mpll(imx6_pcie);
return 0;
+
+err_reg_disable:
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+ return ret;
}
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
--
2.25.1
Move the imx6_pcie_ltssm_disable() earlier and place it just behind the
imx6_pcie_ltssm_enable(), since it might not be only used by suspend
callback directly.
To be symmetric with imx6_pcie_ltssm_enable(), add the IMX6Q and IMX8MQ
switch cases in imx6_pcie_ltssm_disable().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 38 +++++++++++++--------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6d7ae141ec58..21e9101f63f0 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -805,6 +805,25 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
}
}
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+ struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+ switch (imx6_pcie->drvdata->variant) {
+ case IMX6Q:
+ case IMX6SX:
+ case IMX6QP:
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 0);
+ break;
+ case IMX7D:
+ case IMX8MQ:
+ case IMX8MM:
+ reset_control_assert(imx6_pcie->apps_reset);
+ break;
+ }
+}
+
static int imx6_pcie_start_link(struct dw_pcie *pci)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
@@ -949,25 +968,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
};
#ifdef CONFIG_PM_SLEEP
-static void imx6_pcie_ltssm_disable(struct device *dev)
-{
- struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
-
- switch (imx6_pcie->drvdata->variant) {
- case IMX6SX:
- case IMX6QP:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_PCIE_CTL_2, 0);
- break;
- case IMX7D:
- case IMX8MM:
- reset_control_assert(imx6_pcie->apps_reset);
- break;
- default:
- dev_err(dev, "ltssm_disable not supported\n");
- }
-}
-
static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
{
struct device *dev = imx6_pcie->pci->dev;
--
2.25.1
Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
Encapsulate clocks, regulators disables and PHY uninitialization into
imx6_pcie_host_exit().
To keep suspend/resume symmetric as much as possible, invoke these two
new created functions in suspend callback.
To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 62 ++++++++++++++++-----------
1 file changed, 37 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 21e9101f63f0..b7a7e3465f28 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -703,13 +703,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
- int ret;
-
- ret = imx6_pcie_clk_enable(imx6_pcie);
- if (ret) {
- dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
- return ret;
- }
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
@@ -904,6 +897,14 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
return 0;
}
+static void imx6_pcie_stop_link(struct dw_pcie *pci)
+{
+ struct device *dev = pci->dev;
+
+ /* Turn off PCIe LTSSM */
+ imx6_pcie_ltssm_disable(dev);
+}
+
static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -923,11 +924,17 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
+ ret = imx6_pcie_clk_enable(imx6_pcie);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
+ goto err_reg_disable;
+ }
+
if (imx6_pcie->phy) {
ret = phy_power_on(imx6_pcie->phy);
if (ret) {
dev_err(dev, "pcie phy power up failed\n");
- goto err_reg_disable;
+ goto err_clk_disable;
}
}
@@ -941,24 +948,40 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
ret = phy_init(imx6_pcie->phy);
if (ret) {
dev_err(dev, "waiting for phy ready timeout!\n");
- goto err_clk_disable;
+ goto err_phy_off;
}
}
imx6_setup_phy_mpll(imx6_pcie);
return 0;
-err_clk_disable:
- imx6_pcie_clk_disable(imx6_pcie);
err_phy_off:
if (imx6_pcie->phy)
phy_power_off(imx6_pcie->phy);
+err_clk_disable:
+ imx6_pcie_clk_disable(imx6_pcie);
err_reg_disable:
if (imx6_pcie->vpcie)
regulator_disable(imx6_pcie->vpcie);
return ret;
}
+static void imx6_pcie_host_exit(struct pcie_port *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+ if (imx6_pcie->phy) {
+ if (phy_power_off(imx6_pcie->phy))
+ dev_err(pci->dev, "unable to power off PHY\n");
+ phy_exit(imx6_pcie->phy);
+ }
+ imx6_pcie_clk_disable(imx6_pcie);
+
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+}
+
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
.host_init = imx6_pcie_host_init,
};
@@ -1008,25 +1031,14 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
static int imx6_pcie_suspend_noirq(struct device *dev)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+ struct pcie_port *pp = &imx6_pcie->pci->pp;
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
return 0;
imx6_pcie_pm_turnoff(imx6_pcie);
- imx6_pcie_ltssm_disable(dev);
- imx6_pcie_clk_disable(imx6_pcie);
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MM:
- if (phy_power_off(imx6_pcie->phy))
- dev_err(dev, "unable to power off PHY\n");
- phy_exit(imx6_pcie->phy);
- break;
- default:
- break;
- }
-
- if (imx6_pcie->vpcie)
- regulator_disable(imx6_pcie->vpcie);
+ imx6_pcie_stop_link(imx6_pcie->pci);
+ imx6_pcie_host_exit(pp);
return 0;
}
--
2.25.1
If the PCIe link is down, return zero from imx6_pcie_start_link() so the
driver will probe successfully.
[bhelgaas: drop imx6_pcie_start_link() return value check here instead of
in next patch, pointed out by Lucas]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d263574e5c85..3ac4f2aa91c5 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -836,7 +836,9 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
/* Start LTSSM. */
imx6_pcie_ltssm_enable(dev);
- dw_pcie_wait_for_link(pci);
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret)
+ goto err_reset_phy;
if (pci->link_gen == 2) {
/* Allow Gen2 mode after the link is up. */
@@ -872,7 +874,9 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
}
/* Make sure link training is finished as well! */
- dw_pcie_wait_for_link(pci);
+ ret = dw_pcie_wait_for_link(pci);
+ if (ret)
+ goto err_reset_phy;
} else {
dev_info(dev, "Link: Gen2 disabled\n");
}
@@ -886,7 +890,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
imx6_pcie_reset_phy(imx6_pcie);
- return ret;
+ return 0;
}
static int imx6_pcie_host_init(struct pcie_port *pp)
@@ -1028,10 +1032,7 @@ static int imx6_pcie_resume_noirq(struct device *dev)
return ret;
dw_pcie_setup_rc(pp);
- ret = imx6_pcie_start_link(imx6_pcie->pci);
- if (ret < 0)
- dev_info(dev, "pcie link is down after resume.\n");
-
+ imx6_pcie_start_link(imx6_pcie->pci);
return 0;
}
#endif
--
2.25.1
When disabling PCIe clocks, disable i.MX6QDL ref clock too.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 78b839e92620..eaae144db4f3 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -586,6 +586,14 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
case IMX6SX:
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
break;
+ case IMX6QP:
+ case IMX6Q:
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD,
+ IMX6Q_GPR1_PCIE_TEST_PD);
+ break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
--
2.25.1
Encapsulate the i.MX PCIe clock enable operations into one standalone
function, imx6_pcie_clk_enable(). No functional change intended.
[bhelgaas: split pure code moves into separate patches]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 95 ++++++++++++++++-----------
1 file changed, 56 insertions(+), 39 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index f458461880dc..ff5829e42ea7 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -600,6 +600,58 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
}
}
+static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
+{
+ struct dw_pcie *pci = imx6_pcie->pci;
+ struct device *dev = pci->dev;
+ int ret;
+
+ ret = clk_prepare_enable(imx6_pcie->pcie_phy);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie_phy clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(imx6_pcie->pcie_bus);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie_bus clock\n");
+ goto err_pcie_bus;
+ }
+
+ ret = clk_prepare_enable(imx6_pcie->pcie);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie clock\n");
+ goto err_pcie;
+ }
+
+ ret = imx6_pcie_enable_ref_clk(imx6_pcie);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie ref clock\n");
+ goto err_ref_clk;
+ }
+
+ switch (imx6_pcie->drvdata->variant) {
+ case IMX8MM:
+ if (phy_power_on(imx6_pcie->phy))
+ dev_err(dev, "unable to power on PHY\n");
+ break;
+ default:
+ break;
+ }
+ /* allow the clocks to stabilize */
+ usleep_range(200, 500);
+ return 0;
+
+err_ref_clk:
+ clk_disable_unprepare(imx6_pcie->pcie);
+err_pcie:
+ clk_disable_unprepare(imx6_pcie->pcie_bus);
+err_pcie_bus:
+ clk_disable_unprepare(imx6_pcie->pcie_phy);
+
+ return ret;
+}
+
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
{
clk_disable_unprepare(imx6_pcie->pcie);
@@ -671,40 +723,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
}
- ret = clk_prepare_enable(imx6_pcie->pcie_phy);
- if (ret) {
- dev_err(dev, "unable to enable pcie_phy clock\n");
- goto err_pcie_phy;
- }
-
- ret = clk_prepare_enable(imx6_pcie->pcie_bus);
- if (ret) {
- dev_err(dev, "unable to enable pcie_bus clock\n");
- goto err_pcie_bus;
- }
-
- ret = clk_prepare_enable(imx6_pcie->pcie);
- if (ret) {
- dev_err(dev, "unable to enable pcie clock\n");
- goto err_pcie;
- }
-
- ret = imx6_pcie_enable_ref_clk(imx6_pcie);
+ ret = imx6_pcie_clk_enable(imx6_pcie);
if (ret) {
- dev_err(dev, "unable to enable pcie ref clock\n");
- goto err_ref_clk;
- }
-
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MM:
- if (phy_power_on(imx6_pcie->phy))
- dev_err(dev, "unable to power on PHY\n");
- break;
- default:
- break;
+ dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
+ goto err_clks;
}
- /* allow the clocks to stabilize */
- usleep_range(200, 500);
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
@@ -763,13 +786,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return;
-err_ref_clk:
- clk_disable_unprepare(imx6_pcie->pcie);
-err_pcie:
- clk_disable_unprepare(imx6_pcie->pcie_bus);
-err_pcie_bus:
- clk_disable_unprepare(imx6_pcie->pcie_phy);
-err_pcie_phy:
+err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
ret = regulator_disable(imx6_pcie->vpcie);
if (ret)
--
2.25.1
Since dw_pcie_host_init() checks for errors from ops->host_init(),
check for errors when enabling power regulators and clocks and return them.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ff5829e42ea7..78b839e92620 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -708,7 +708,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
imx6_pcie->gpio_active_high);
}
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
@@ -719,7 +719,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
ret);
- return;
+ return ret;
}
}
@@ -784,7 +784,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
msleep(100);
}
- return;
+ return 0;
err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
@@ -793,6 +793,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
ret);
}
+ return ret;
}
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
@@ -911,11 +912,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct device *dev = pci->dev;
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ int ret;
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (ret < 0) {
+ dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
+ return ret;
+ }
+
imx6_setup_phy_mpll(imx6_pcie);
return 0;
--
2.25.1
Call imx6_pcie_host_init() instead of duplicating codes in resume. Note
that this also means we do MPLL setup again during resume, which we didn't
do before.
[bhelgaas: add MPLL setup note, pointed out by Lucas]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index eaae144db4f3..2b42c37f1617 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1034,9 +1034,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
return 0;
- imx6_pcie_assert_core_reset(imx6_pcie);
- imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx6_pcie_host_init(pp);
+ if (ret)
+ return ret;
dw_pcie_setup_rc(pp);
ret = imx6_pcie_start_link(imx6_pcie->pci);
--
2.25.1
From: Bjorn Helgaas <[email protected]>
imx6_pcie_clk_enable() enables clocks in the order:
pcie_phy
pcie_bus
pcie
imx6_pcie_enable_ref_clk
Change imx6_pcie_clk_disable() to disable them in the reverse order.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Acked-by: Richard Zhu <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index afb4d58fd693..6d7ae141ec58 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -655,10 +655,10 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
{
+ imx6_pcie_disable_ref_clk(imx6_pcie);
clk_disable_unprepare(imx6_pcie->pcie);
- clk_disable_unprepare(imx6_pcie->pcie_phy);
clk_disable_unprepare(imx6_pcie->pcie_bus);
- imx6_pcie_disable_ref_clk(imx6_pcie);
+ clk_disable_unprepare(imx6_pcie->pcie_phy);
}
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
--
2.25.1
- Move the phy_power_on() to host_init from imx6_pcie_clk_enable().
- Move the phy_init() to host_init from imx6_pcie_deassert_core_reset().
Refine the error handling in imx6_pcie_host_init() accordingly.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 36 +++++++++++++++++----------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ad0933c3dc70..afb4d58fd693 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -639,14 +639,6 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
goto err_ref_clk;
}
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MM:
- if (phy_power_on(imx6_pcie->phy))
- dev_err(dev, "unable to power on PHY\n");
- break;
- default:
- break;
- }
/* allow the clocks to stabilize */
usleep_range(200, 500);
return 0;
@@ -723,10 +715,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
case IMX8MQ:
reset_control_deassert(imx6_pcie->pciephy_reset);
break;
- case IMX8MM:
- if (phy_init(imx6_pcie->phy))
- dev_err(dev, "waiting for phy ready timeout!\n");
- break;
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
@@ -762,6 +750,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
usleep_range(200, 500);
break;
case IMX6Q: /* Nothing to do */
+ case IMX8MM:
break;
}
@@ -914,16 +903,37 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
+
+ if (imx6_pcie->phy) {
+ ret = phy_power_on(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "pcie phy power up failed\n");
+ goto err_reg_disable;
+ }
+ }
+
ret = imx6_pcie_deassert_core_reset(imx6_pcie);
if (ret < 0) {
dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
- goto err_reg_disable;
+ goto err_phy_off;
}
+ if (imx6_pcie->phy) {
+ ret = phy_init(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "waiting for phy ready timeout!\n");
+ goto err_clk_disable;
+ }
+ }
imx6_setup_phy_mpll(imx6_pcie);
return 0;
+err_clk_disable:
+ imx6_pcie_clk_disable(imx6_pcie);
+err_phy_off:
+ if (imx6_pcie->phy)
+ phy_power_off(imx6_pcie->phy);
err_reg_disable:
if (imx6_pcie->vpcie)
regulator_disable(imx6_pcie->vpcie);
--
2.25.1
From: Bjorn Helgaas <[email protected]>
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the
file since they depend on nothing and are used by several other functions
that will be moved earlier. No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Acked-by: Richard Zhu <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 50 +++++++++++++--------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 7a285fb0f619..8653ca8cbfb9 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -146,6 +146,31 @@ struct imx6_pcie {
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
+static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
+{
+ WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
+ imx6_pcie->drvdata->variant != IMX8MM);
+ return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
+}
+
+static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
+{
+ unsigned int mask, val;
+
+ if (imx6_pcie->drvdata->variant == IMX8MQ &&
+ imx6_pcie->controller_id == 1) {
+ mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
+ val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+ PCI_EXP_TYPE_ROOT_PORT);
+ } else {
+ mask = IMX6Q_GPR12_DEVICE_TYPE;
+ val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
+ PCI_EXP_TYPE_ROOT_PORT);
+ }
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
+}
+
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -415,13 +440,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
imx6_pcie->gpio_active_high);
}
-static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
-{
- WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
- imx6_pcie->drvdata->variant != IMX8MM);
- return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
-}
-
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -617,24 +635,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
}
-static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
-{
- unsigned int mask, val;
-
- if (imx6_pcie->drvdata->variant == IMX8MQ &&
- imx6_pcie->controller_id == 1) {
- mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
- val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
- PCI_EXP_TYPE_ROOT_PORT);
- } else {
- mask = IMX6Q_GPR12_DEVICE_TYPE;
- val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
- PCI_EXP_TYPE_ROOT_PORT);
- }
-
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
-}
-
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
--
2.25.1
On Thu, Jul 14, 2022 at 03:30:52PM +0800, Richard Zhu wrote:
> This series patches refine pci-imx6 driver and do the following main changes.
> - Encapsulate the clock enable into one standalone function
> - Add the error propagation from host_init and resume
> - Turn off regulator when the system is in suspend mode
> - Let the probe successfully when link never comes up
> - Do not hide the phy driver callbacks in core reset and clk_enable.
> - Keep symmetric as much as possible between suspend and resume callbacks.
> BTW, this series are verified on i.MX8MM EVK board when one NVME is used.
>
> Main changes from v14 to v15 refer to Lucas' comments and Bjorn's suggestions:
> Only the five patches listed below have changes.
> 10/17
> - Remove regulator_disable() from imx6_pcie_shutdown() and update the commit
> log accordingly refer to Lucas' comments.
> 11/17
> - Move the regulator enable before the PHY init and core reset assert to
> avoid introducing more failure cleanup paths refer to Lucas' comments.
> 14/17 has the codes conflictions.
> - Rebase the 14/17 patch because of the codes conflictions introduced by
> previous 11/17 new changes.
> 16/17
> - Add the missing the IMX8MQ case and drop the default case in
> imx6_pcie_ltssm_disable() refer to Lucas' comments.
> 17/17
> - Rebase the codes and resolve the codes conflictions introduced by
> previous 11/17 new changes.
> - Correct one failure cleanup in imx6_pcie_host_init().
>
> Main changes from v13 to v14 refer to Bjorn's comments:
> - To keep suspend/resume symmetric as much as possible. Create
> imx6_pcie_stop_link() and imx6_pcie_host_exit() functions, and invoke
> them in suspend callback.
> - Since the imx6_pcie_clk_disable() is invoked by imx6_pcie_host_exit(),
> to be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
> to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
>
> Main changes from v12 to v13:
> - Call imx6_pcie_host_init() instead of duplicating codes in resume.
> - Move the regulator enable out of imx6_pcie_deassert_core_reset().
> Re-format the error handling in imx6_pcie_deassert_core_reset()
> and imx6_pcie_host_init() accordingly.
>
> Main changes from v11 to v12 issued by Bjorn:
> - Add four intro patches to move code around to collect similar things
> (PHY management, reset management) together. This makes the first
> diff to collect clock enables simpler because it's not cluttered with
> unrelated things that didn't actually change.
> - Factor out ref clock disables so the disable function structure matches
> the enable structure.
> - Drop unused "ret" from "Reduce resume time ..." to avoid bisection
> hole, then add it back in "Do not hide phy driver ..." where we start
> using it again.
> - Add patch to make imx6_pcie_clk_disable() symmetric with
> imx6_pcie_clk_enable() in terms of enable/disable ordering.
>
> Main changes from v10 to v11:
> No code changes, just do the following operations refer to Bjorn's comments.
> - Split #6 patch into two patches.
> - Rebase to v5.19-rc1 based on for-next branch of Shawn's git.
>
> Main changes from v9 to v10:
> - Add the "Reviewed-by: Lucas Stach <[email protected]>" tag into #3
> and #4 patches.
> - Refer to Bjorn's comments:
> - refine the commit of the first patch
> - keep alignment of the message format in the second patch
> - More specific commit and subject of the #5 and #7 patches.
> - Move the regualtor_disable into suspend, turn off the regulator when bus
> is powered off and system in suspend mode.
> - Let the driver probe successfully, return zero in imx6_pcie_start_link()
> when PCIe link is down.
> In this link down scenario, only start the PCIe link training in resume
> when the link is up before system suspend to avoid the long latency in
> the link training period.
> - Don't hide phy driver callbacks in core reset and clk_enable, and refine
> the error handling accordingly.
> - Drop the #8 patch of v9 series, since the clocks and powers are not gated
> off anymore when link is down.
>
> Main changes from v8 to v9:
> - Don't change pcie-designware codes, and do the error exit process only in
> pci-imx6 driver internally.
> - Move the phy driver callbacks to the proper places
>
> Main changes from v7 to v8:
> Regarding Bjorn's review comments.
> - Align the format of the dev_info message and refine commit log of
> #6/7/8 patches.
> - Rename the err_reset_phy label, since there is no PHY reset in the out
>
> Main changes from v6 to v7:
> - Keep the regulator usage counter balance in the #5 patch of v6 series.
>
> Main changes from v5 to v6:
> - Refer to the following discussion with Fabio, fix the dump by his patch.
> https://patchwork.kernel.org/project/linux-pci/patch/[email protected]/
> Refine and rebase this patch-set after Fabio' dump fix patch is merged.
> - Add one new #4 patch to disable i.MX6QDL REF clock too when disable clocks
> - Split the regulator refine codes into one standalone patch #5 in this version.
>
> Main changes from v4 to v5:
> - Since i.MX8MM PCIe support had been merged. Based on Lorenzo's git repos,
> resend the patch-set after rebase.
>
> Main changes from v3 to v4:
> - Regarding Mark's comments, delete the regulator_is_enabled() check.
> - Squash #3 and #6 of v3 patch into #5 patch of v4 set.
>
> Main changes from v2 to v3:
> - Add "Reviewed-by: Lucas Stach <[email protected]>" tag into
> first two patches.
> - Add a Fixes tag into #3 patch.
> - Split the #4 of v2 to two patches, one is clock disable codes move,
> the other one is the acutal clock unbalance fix.
> - Add a new host_exit() callback into dw_pcie_host_ops, then it could be
> invoked to handle the unbalance issue in the error handling after
> host_init() function when link is down.
> - Add a new host_exit() callback for i.MX PCIe driver to handle this case
> in the error handling after host_init.
>
> Main changes from v1 to v2:
> Regarding Lucas' comments.
> - Move the placement of the new imx6_pcie_clk_enable() to avoid the
> forward declarition.
> - Seperate the second patch of v1 patch-set to three patches.
> - Use the module_param to replace the kernel command line.
> Regarding Bjorn's comments:
> - Use the cover-letter for a multi-patch series.
> - Correct the subject line, and refine the commit logs. For example,
> remove the timestamp of the logs.
>
> Bjorn Helgaas (5):
> PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type()
> earlier
> PCI: imx6: Move PHY management functions together
> PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
> PCI: imx6: Factor out ref clock disable to match enable
> PCI: imx6: Disable clocks in reverse order of enable
>
> Richard Zhu (12):
> PCI: imx6: Move imx6_pcie_clk_disable() earlier
> PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
> PCI: imx6: Propagate .host_init() errors to caller
> PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
> PCI: imx6: Call host init function directly in resume
> PCI: imx6: Turn off regulator when system is in suspend mode
> PCI: imx6: Move regulator enable out of
> imx6_pcie_deassert_core_reset()
> PCI: imx6: Mark the link down as non-fatal error
> PCI: imx6: Reduce resume time by only starting link if it was up
> before suspend
> PCI: imx6: Do not hide phy driver callbacks and refine the error
> handling
> PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
> PCI: imx6: Reformat suspend callback to keep symmetric with resume
>
> drivers/pci/controller/dwc/pci-imx6.c | 660 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------
> 1 file changed, 357 insertions(+), 303 deletions(-)
Applied to pci/ctrl/imx6 for v5.20, thanks!
On Thu, Jul 14, 2022 at 03:31:09PM +0800, Richard Zhu wrote:
> Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
> Encapsulate clocks, regulators disables and PHY uninitialization into
> imx6_pcie_host_exit().
>
> To keep suspend/resume symmetric as much as possible, invoke these two
> new created functions in suspend callback.
>
> To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
> to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Richard Zhu <[email protected]>
> Signed-off-by: Bjorn Helgaas <[email protected]>
> Reviewed-by: Lucas Stach <[email protected]>
If CONFIG_PM_SLEEP=n:
Error log:
drivers/pci/controller/dwc/pci-imx6.c:973:13: error: 'imx6_pcie_host_exit' defined but not used [-Werror=unused-function]
973 | static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
| ^~~~~~~~~~~~~~~~~~~
drivers/pci/controller/dwc/pci-imx6.c:904:13: error: 'imx6_pcie_stop_link' defined but not used [-Werror=unused-function]
904 | static void imx6_pcie_stop_link(struct dw_pcie *pci)
Guenter
On Mon, Jul 18, 2022 at 06:19:00AM -0700, Guenter Roeck wrote:
> On Thu, Jul 14, 2022 at 03:31:09PM +0800, Richard Zhu wrote:
> > Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
> > Encapsulate clocks, regulators disables and PHY uninitialization into
> > imx6_pcie_host_exit().
> >
> > To keep suspend/resume symmetric as much as possible, invoke these two
> > new created functions in suspend callback.
> >
> > To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
> > to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().
> >
> > Link: https://lore.kernel.org/r/[email protected]
> > Signed-off-by: Richard Zhu <[email protected]>
> > Signed-off-by: Bjorn Helgaas <[email protected]>
> > Reviewed-by: Lucas Stach <[email protected]>
>
> If CONFIG_PM_SLEEP=n:
>
> Error log:
> drivers/pci/controller/dwc/pci-imx6.c:973:13: error: 'imx6_pcie_host_exit' defined but not used [-Werror=unused-function]
> 973 | static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
> | ^~~~~~~~~~~~~~~~~~~
> drivers/pci/controller/dwc/pci-imx6.c:904:13: error: 'imx6_pcie_stop_link' defined but not used [-Werror=unused-function]
> 904 | static void imx6_pcie_stop_link(struct dw_pcie *pci)
Thanks, Guenter, I added a patch that should fix this:
https://lore.kernel.org/r/20220719210427.GA1568454@bhelgaas