On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote:
> The problem is called Andre Hedrick, a guy who is talking in miracles,
> but seems to be unable to fix either the issues with:
> - the single TX4 with multiple PDC20270
> nor:
> - multiple TX2 with PDC20268
>
> or at least ignores further communication on that problems, if you
> don't use some magic storage peoples language.(*) TM in a parallel
> universe, not too far from here...
so you're going to fix the problems yourself then?
j.
--
R N G G "Well, there it goes again... And we just sit
I G G G here without opposable thumbs." -- gary larson
On Sun, 3 Mar 2002, john slee wrote:
> On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote:
> > The problem is called Andre Hedrick, a guy who is talking in miracles,
> > but seems to be unable to fix either the issues with:
> > - the single TX4 with multiple PDC20270
> > nor:
> > - multiple TX2 with PDC20268
> >
> > or at least ignores further communication on that problems, if you
> > don't use some magic storage peoples language.(*) TM in a parallel
> > universe, not too far from here...
>
> so you're going to fix the problems yourself then?
>
> j.
You mean this does not work for you? Serious question, not being flip.
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 3
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
PDC20270: IDE controller on PCI bus 03 dev 08
PDC20270: chipset revision 2
PDC20270: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio
PDC20270: IDE controller on PCI bus 03 dev 10
PDC20270: chipset revision 2
PDC20270: not 100% native mode: will probe irqs later
PDC20270: ROM enabled at 0x000dc000
ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio
hda: IBM-DTLA-307075, ATA DISK drive
hdc: LTN242, ATAPI CD/DVD-ROM drive
hde: Maxtor 4G160J8, ATA DISK drive
hdg: Maxtor 4G160J8, ATA DISK drive
hdi: Maxtor 4G160J8, ATA DISK drive
hdk: Maxtor 4G160J8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x8000-0x8007,0x8402 on irq 11
ide3 at 0x8800-0x8807,0x8c02 on irq 11
ide4 at 0x9400-0x9407,0x9802 on irq 11
ide5 at 0x9c00-0x9c07,0xa002 on irq 11
hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100)
hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
/dev/ide/host2/bus0/target0/lun0: p1
/dev/ide/host2/bus1/target0/lun0: p1
/dev/ide/host4/bus0/target0/lun0: p1
/dev/ide/host4/bus1/target0/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 3
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
PDC20269: IDE controller on PCI bus 00 dev 40
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
PDC20269: IDE controller on PCI bus 00 dev 48
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio
hda: IBM-DTLA-307075, ATA DISK drive
hdc: LTN242, ATAPI CD/DVD-ROM drive
hde: Maxtor 4G160J8, ATA DISK drive
hdg: Maxtor 4G160J8, ATA DISK drive
hdi: Maxtor 4G160J8, ATA DISK drive
hdk: Maxtor 4G160J8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xc400-0xc407,0xc802 on irq 10
ide3 at 0xcc00-0xcc07,0xd002 on irq 10
ide4 at 0xd800-0xd807,0xdc02 on irq 11
ide5 at 0xe000-0xe007,0xe402 on irq 11
hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(100)
hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdi: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
hdk: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
/dev/ide/host2/bus0/target0/lun0: p1
/dev/ide/host2/bus1/target0/lun0: p1
/dev/ide/host4/bus0/target0/lun0: p1
/dev/ide/host4/bus1/target0/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Clearly they work, the obvious point that is missed is the work is not
being accepted. Oh and I am human, too, regardless what most think or
hate about me.
Regards,
Andre Hedrick
Linux Disk Certification Project Linux ATA Development
On Sunday, 3. March 2002 01:25, Andre Hedrick wrote:
> On Sun, 3 Mar 2002, john slee wrote:
> > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote:
> > > The problem is called Andre Hedrick, a guy who is talking in miracles,
> > > but seems to be unable to fix either the issues with:
> > > - the single TX4 with multiple PDC20270
> > > nor:
> > > - multiple TX2 with PDC20268
> > >
> > > or at least ignores further communication on that problems, if you
> > > don't use some magic storage peoples language.(*) TM in a parallel
> > > universe, not too far from here...
> >
> > so you're going to fix the problems yourself then?
> >
> > j.
>
> You mean this does not work for you? Serious question, not being flip.
>
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> AMD7441: IDE controller on PCI bus 00 dev 39
> AMD7441: chipset revision 3
> AMD7441: not 100% native mode: will probe irqs later
> AMD7441: disabling single-word DMA support (revision < C4)
> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
> PDC20270: IDE controller on PCI bus 03 dev 08
> PDC20270: chipset revision 2
> PDC20270: not 100% native mode: will probe irqs later
> ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio
> PDC20270: IDE controller on PCI bus 03 dev 10
> PDC20270: chipset revision 2
> PDC20270: not 100% native mode: will probe irqs later
> PDC20270: ROM enabled at 0x000dc000
> ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio
> ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio
> hda: IBM-DTLA-307075, ATA DISK drive
> hdc: LTN242, ATAPI CD/DVD-ROM drive
> hde: Maxtor 4G160J8, ATA DISK drive
> hdg: Maxtor 4G160J8, ATA DISK drive
> hdi: Maxtor 4G160J8, ATA DISK drive
> hdk: Maxtor 4G160J8, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0x8000-0x8007,0x8402 on irq 11
> ide3 at 0x8800-0x8807,0x8c02 on irq 11
> ide4 at 0x9400-0x9407,0x9802 on irq 11
> ide5 at 0x9c00-0x9c07,0xa002 on irq 11
> hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63,
> UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache,
> CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB
> Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB)
> w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929
> MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
> /dev/ide/host2/bus0/target0/lun0: p1
> /dev/ide/host2/bus1/target0/lun0: p1
> /dev/ide/host4/bus0/target0/lun0: p1
> /dev/ide/host4/bus1/target0/lun0: p1
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
>
>
>
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> AMD7441: IDE controller on PCI bus 00 dev 39
> AMD7441: chipset revision 3
> AMD7441: not 100% native mode: will probe irqs later
> AMD7441: disabling single-word DMA support (revision < C4)
> ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
> PDC20269: IDE controller on PCI bus 00 dev 40
> PDC20269: chipset revision 2
> PDC20269: not 100% native mode: will probe irqs later
> ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
> PDC20269: IDE controller on PCI bus 00 dev 48
> PDC20269: chipset revision 2
> PDC20269: not 100% native mode: will probe irqs later
> ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio
> ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio
> hda: IBM-DTLA-307075, ATA DISK drive
> hdc: LTN242, ATAPI CD/DVD-ROM drive
> hde: Maxtor 4G160J8, ATA DISK drive
> hdg: Maxtor 4G160J8, ATA DISK drive
> hdi: Maxtor 4G160J8, ATA DISK drive
> hdk: Maxtor 4G160J8, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide2 at 0xc400-0xc407,0xc802 on irq 10
> ide3 at 0xcc00-0xcc07,0xd002 on irq 10
> ide4 at 0xd800-0xd807,0xdc02 on irq 11
> ide5 at 0xe000-0xe007,0xe402 on irq 11
> hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63,
> UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache,
> CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB
> Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB)
> w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929
> MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
> /dev/ide/host2/bus0/target0/lun0: p1
> /dev/ide/host2/bus1/target0/lun0: p1
> /dev/ide/host4/bus0/target0/lun0: p1
> /dev/ide/host4/bus1/target0/lun0: p1
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
>
Looks promising, indeed. Will try it again, soon...
In general, I fear, that the whole ATA technology commits suiside because
of it's own inherent complexity and historical development.
> Clearly they work, the obvious point that is missed is the work is not
> being accepted. Oh and I am human, too, regardless what most think or
> hate about me.
And I understand your point. But light appears on the horizon.
Your work is being accepted for 2.5 and 2.4-ac now, and there is
hope, that sometimes in the near future a generally accepted, and
(nearly) flawless version of 2.4 will be released.
For now, diff/patch seems to remain everyone's favorite tools ;)
> Regards,
>
> Andre Hedrick
> Linux Disk Certification Project Linux ATA Development
Cheers,
Hans-Peter
I am sorry, that was done a long time agin and even updated a few times to
no acceptance.
http://www.kernel.org/pub/linux/kernel/people/hedrick/2.4.{16,17,18}
Sorry it is not clear.
Regards,
On Sun, 3 Mar 2002, Hans-Peter Jansen wrote:
> On Sunday, 3. March 2002 01:25, Andre Hedrick wrote:
> > On Sun, 3 Mar 2002, john slee wrote:
> > > On Sat, Mar 02, 2002 at 04:43:58PM +0100, Hans-Peter Jansen wrote:
> > > > The problem is called Andre Hedrick, a guy who is talking in miracles,
> > > > but seems to be unable to fix either the issues with:
> > > > - the single TX4 with multiple PDC20270
> > > > nor:
> > > > - multiple TX2 with PDC20268
> > > >
> > > > or at least ignores further communication on that problems, if you
> > > > don't use some magic storage peoples language.(*) TM in a parallel
> > > > universe, not too far from here...
> > >
> > > so you're going to fix the problems yourself then?
> > >
> > > j.
> >
> > You mean this does not work for you? Serious question, not being flip.
> >
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > AMD7441: IDE controller on PCI bus 00 dev 39
> > AMD7441: chipset revision 3
> > AMD7441: not 100% native mode: will probe irqs later
> > AMD7441: disabling single-word DMA support (revision < C4)
> > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
> > PDC20270: IDE controller on PCI bus 03 dev 08
> > PDC20270: chipset revision 2
> > PDC20270: not 100% native mode: will probe irqs later
> > ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:pio, hdf:pio
> > ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:pio, hdh:pio
> > PDC20270: IDE controller on PCI bus 03 dev 10
> > PDC20270: chipset revision 2
> > PDC20270: not 100% native mode: will probe irqs later
> > PDC20270: ROM enabled at 0x000dc000
> > ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio
> > ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio
> > hda: IBM-DTLA-307075, ATA DISK drive
> > hdc: LTN242, ATAPI CD/DVD-ROM drive
> > hde: Maxtor 4G160J8, ATA DISK drive
> > hdg: Maxtor 4G160J8, ATA DISK drive
> > hdi: Maxtor 4G160J8, ATA DISK drive
> > hdk: Maxtor 4G160J8, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > ide2 at 0x8000-0x8007,0x8402 on irq 11
> > ide3 at 0x8800-0x8807,0x8c02 on irq 11
> > ide4 at 0x9400-0x9407,0x9802 on irq 11
> > ide5 at 0x9c00-0x9c07,0xa002 on irq 11
> > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63,
> > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache,
> > CHS=19929/255/63, UDMA(100) hdg: 320173056 sectors (163929 MB) w/2048KiB
> > Cache, CHS=19929/255/63, UDMA(100) hdi: 320173056 sectors (163929 MB)
> > w/2048KiB Cache, CHS=19929/255/63, UDMA(100) hdk: 320173056 sectors (163929
> > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(100) Partition check:
> > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
> > /dev/ide/host2/bus0/target0/lun0: p1
> > /dev/ide/host2/bus1/target0/lun0: p1
> > /dev/ide/host4/bus0/target0/lun0: p1
> > /dev/ide/host4/bus1/target0/lun0: p1
> > Floppy drive(s): fd0 is 1.44M
> > FDC 0 is a post-1991 82077
> >
> >
> >
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > AMD7441: IDE controller on PCI bus 00 dev 39
> > AMD7441: chipset revision 3
> > AMD7441: not 100% native mode: will probe irqs later
> > AMD7441: disabling single-word DMA support (revision < C4)
> > ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
> > ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
> > PDC20269: IDE controller on PCI bus 00 dev 40
> > PDC20269: chipset revision 2
> > PDC20269: not 100% native mode: will probe irqs later
> > ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
> > ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio
> > PDC20269: IDE controller on PCI bus 00 dev 48
> > PDC20269: chipset revision 2
> > PDC20269: not 100% native mode: will probe irqs later
> > ide4: BM-DMA at 0xe800-0xe807, BIOS settings: hdi:pio, hdj:pio
> > ide5: BM-DMA at 0xe808-0xe80f, BIOS settings: hdk:pio, hdl:pio
> > hda: IBM-DTLA-307075, ATA DISK drive
> > hdc: LTN242, ATAPI CD/DVD-ROM drive
> > hde: Maxtor 4G160J8, ATA DISK drive
> > hdg: Maxtor 4G160J8, ATA DISK drive
> > hdi: Maxtor 4G160J8, ATA DISK drive
> > hdk: Maxtor 4G160J8, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > ide2 at 0xc400-0xc407,0xc802 on irq 10
> > ide3 at 0xcc00-0xcc07,0xd002 on irq 10
> > ide4 at 0xd800-0xd807,0xdc02 on irq 11
> > ide5 at 0xe000-0xe007,0xe402 on irq 11
> > hda: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63,
> > UDMA(100) hde: 320173056 sectors (163929 MB) w/2048KiB Cache,
> > CHS=19929/255/63, UDMA(133) hdg: 320173056 sectors (163929 MB) w/2048KiB
> > Cache, CHS=19929/255/63, UDMA(133) hdi: 320173056 sectors (163929 MB)
> > w/2048KiB Cache, CHS=19929/255/63, UDMA(133) hdk: 320173056 sectors (163929
> > MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133) Partition check:
> > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
> > /dev/ide/host2/bus0/target0/lun0: p1
> > /dev/ide/host2/bus1/target0/lun0: p1
> > /dev/ide/host4/bus0/target0/lun0: p1
> > /dev/ide/host4/bus1/target0/lun0: p1
> > Floppy drive(s): fd0 is 1.44M
> > FDC 0 is a post-1991 82077
> >
>
> Looks promising, indeed. Will try it again, soon...
>
> In general, I fear, that the whole ATA technology commits suiside because
> of it's own inherent complexity and historical development.
>
> > Clearly they work, the obvious point that is missed is the work is not
> > being accepted. Oh and I am human, too, regardless what most think or
> > hate about me.
>
> And I understand your point. But light appears on the horizon.
> Your work is being accepted for 2.5 and 2.4-ac now, and there is
> hope, that sometimes in the near future a generally accepted, and
> (nearly) flawless version of 2.4 will be released.
>
> For now, diff/patch seems to remain everyone's favorite tools ;)
>
> > Regards,
> >
> > Andre Hedrick
> > Linux Disk Certification Project Linux ATA Development
>
> Cheers,
> Hans-Peter
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
Linux Disk Certification Project Linux ATA Development