Ok, this contains a lot of patches all over the map, since there were two
weeks of merging to be done (and the merging took almost a week).
Networking, USB, SCSI, ALSA, ACPI, and various architecture updates (UML,
Sparc, ia64, ppc64 and ARM).
And obviously part of the merge from Andrew Morton.
And Roland McGrath has been fixing POSIX thread signal handling, and that
in turn ended up causing a lot of downstream fixes in affected areas.
Linus
----
Summary of changes from v2.5.59 to v2.5.60
============================================
<[email protected]>:
o ia64: skip _PRT entry for non-existent IOSAPICs
Adam J. Richter <[email protected]>:
o The following changes to ide-scsi.c are a recovery of the
changes that I had in ide-scsi.c in the stock kernel's before
Martin Dalecki's IDE tree was reverted and a few other changes.
Alex Williamson <[email protected]>:
o ia64: fix typo in ia32_support.c
Alexey Kuznetsov <[email protected]>:
o [TCP]: Do not forget data copy while collapsing retransmission
queue
Andi Kleen <[email protected]>:
o [IPV4]: Better behavior for NETDEV_CHANGENAME requests
Andrew Morton <[email protected]>:
o [SPARC64]: Handle unchanging _TIF_32BIT properly in SET_PERSONALITY
o [IPV4]: Kill bogus semicolon in fib_get_next
o Fix data loss problem due to sys_sync
o direct-IO: fix i_size handling on ENOSPC
o Fix inode size accounting race
o vmlinux fix
o Compile fix in sound/oss/maestro.c
o remove lock_kernel() from exec of setuid apps
o properly handle too long pathnames in d_path
o fix handling of ext2 allocation failures
o ext2_new_block cleanups and fixes
o ext3: fix scheduling storm and lockups
o slab poison checking fix
o quota locking fix
o quota semaphore fix
o preempt spinlock efficiency fix
o Make fix sync_filesystems() actually do something
o stack overflow checking fix
o slab IRQ fix
o blkdev.h fixes
o symbol_get linkage fix
o i386 pgd_index() doesn't parenthesize its arg
o kernel param and KBUILD_MODNAME name-munging mess
o i386 pgd_index() doesn't parenthesize its arg
o pcmcia timer initialisation fixes
o correct wait accounting in wait_on_buffer()
o atyfb compilation fix
o floppy locking fix
o soundcore.c referenced non-existent errno variable
o Fix generic_file_readonly_mmap()
o exit_mmap fix for 64bit->32bit execs
o fix show_task oops
o qlogic fix
o implement posix_fadvise64()
o fix agp compile warning
o add stats for page reclaim via inode freeing
o file-backed vma merging
o mm/mmap.c whitespace cleanups
o cleanup in read_cache_pages()
o remove __GFP_HIGHIO
o Use a slab cache for pgd and pmd pages
o pgd_ctor update
o Avoid losing timer ticks when slab debug is enabled
o remove unneeded locking in do_syslog()
o hangcheck-timer
o Restore LSM hook calls to sendfile
o asm-i386/mmzone.h macro paren/eval fixes
o remove spaces from slab names
o remove will_become_orphaned_pgrp()
o MAX_IO_APICS #ifdef'd wrongly
o patch to DAC960 driver for error retry
o Remove __ from topology macros
o put_user() warning fix
o fix #warnings
o ia32 Lost tick compensation
o Include <asm/page.h> in fs/seq_file.c, as it uses
o scsi_eh_* needs to run even during suspend
o misc fixes
o Remove unneeded code in fs/fs-writeback.c
o Fix latencies during writeback
o fix i_sem contention in sys_unlink()
o seqlock fix: read_seqretry_irqrestore()
o BTTV build fix
o reiserfs v3 readpages support
o self-unplugging request queues
o Remove most of the blk_run_queues() calls
o Updated Documentation/kernel-parameters.txt
o JBD Documentation
o Restore LSM hook calls to sendfile
o Fix SMP race betwen __sync_single_inode and
o ia32 IRQ distribution rework
o Fix futexes in huge pages
o Optimise follow_page() for page-table-based hugepages
o default_idle micro-optimisation
o loop inefficiency fix
o pte_chain_alloc fixes
o give hugetlbfs a set_page_dirty a_op
o Infrastructure for correct hugepage refcounting
o convert hugetlb code to use compound pages
o get_unmapped_area for hugetlbfs
o hugetlbfs: fix truncate
o hugetlbfs i_size fixes
o hugetlbfs cleanups
o Give all architectures a hugetlb_nopage()
o Fix hugetlbfs faults
o ia32 hugetlb cleanup
o Fix hugetlb_vmtruncate_list()
o hugetlb mremap fix
o mm/mremap.c whitespace cleanup
o spinlock debugging on uniprocessors
o CPU Hotplug mm/slab.c CPU_UP_CANCELED fix
o Fix signed use of i_blocks in ext3 truncate
o revert extra sendfile security hook patch
o Fix possible uninitialised variable in vma merging code
o Fix compile warning for 'sys_exit_group'
Andries E. Brouwer <[email protected]>:
o Remove dead code
o Doc fix
Andy Grover <[email protected]>:
o ACPI: Boot functions don't use cmdline, so don't pass it around
o ACPI: Move drivers/acpi/include directory to include/acpi
o ACPI: Move more headers to include/acpi, and delete an unused
header
o CPUFREQ: Break out ACPI Perf code into its own module, under
cpufreq (Dominik Brodowski)
o ACPI: acpiphp.h includes both linux/acpi.h and acpi_bus.h. Since
the former now also includes the latter, acpiphp.h only needs the
one, now.
o ACPI: Remove include of unused header (Adrian Bunk)
o ACPI: Properly init/clean up in cpufreq/acpi (Dominik Brodowski)
o ACPI: Make proc write interfaces work (Pavel Machek)
o ACPI: This makes it possible to select method of bios restoring
after S3 resume. [=> no more ugly ifdefs] (Pavel Machek)
o ACPI: Handle P_BLK lengths shorter than 6 more gracefully
o ACPI: update to 20030122
o ACPI: It is OK to not have a _PPC, so don't error out if it's not
found
o ACPI: Optimize for space
o ACPI: Enable compilation w/o cpufreq
Anton Blanchard <[email protected]>:
o ppc64: defconfig update
o ppc64: SO_TIMESTAMP fix from sparc64
o ppc64: compat layer updates from Stephen Rothwell
o ppc64: defer change of 32/64bit mode, from Andrew Morton
o ppc64: now make it compile
o ppc64: some small optimisations
o ppc64: restore non rt signals, we need to verify that older 64bit
glibcs dont use them
o ppc64: Preparation work for minimal register save/restore exception
paths
o ppc64: Fix compile with CONFIG_DEBUG_KERNEL disabled, from David
Altobelli
o ppc64: rtas proc fixes from David Altobelli
o ppc64: defconfig update
o ppc64: Fix my overoptimisation of zeroing RESULT. Yes Linus, it was
all my fault.
o ppc64: fix UP compile
o ppc64: module updates from Rusty
o ppc64: Add ppc64 relocations to asm/elf.h. I am the example of good
taste
o missing include in pci-sysfs.c
o ppc64: update for signal changes
o ppc64: Fix nasty bug in cmpxchg where we would sign extend the old
value
Arun Sharma <[email protected]>:
o ia64: make hugetlb support work again
Bart De Schuymer <[email protected]>:
o [BRIDGE]: update to new module scheme
Bjorn Helgaas <[email protected]>:
o irq cleanups
Bob Miller <[email protected]>:
o [NETFILTER]: Delete un-used stack variable in ip_nat_helper.c
Chris Wedgwood <[email protected]>:
o [IPV6]: Fix tcp_v6_xmit prototype
o signal locking update
o missing sound include file
Chris Wright <[email protected]>:
o 2.5-bk trivial LSM cleanup
Christoph Hellwig <[email protected]>:
o remove __scsi_add_host
o fixes and cleanups for the new command allocation code
o [SCSI] Remove host_active
o coding style updates for scsi_lib.c
o [XFS] remove a dead codepath in xfs_syncsub
o fix leaks in vxfs_read_fshead()
Daniel Jacobowitz <[email protected]>:
o Tweak has_stopped_jobs for use with debugging
o Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO
o Use force_sig_specific to send SIGSTOP to newly-created
CLONE_PTRACE processes
o Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities
o Signal handling bugs for thread exit + ptrace
Daniel Stekloff <[email protected]>:
o pci patch for sysfs files
Dave Kleikamp <[email protected]>:
o JFS: Switch over to using akpm's no-buffer-head operations
o JFS: replace ugly JFS debug macros with simpler ones
o JFS: Minor update in Documentation/filesystems/jfs.txt
o JFS: Implement get_index_page to replace some uses of
read_index_page
David Brownell <[email protected]>:
o usb root hub strings
o USB ohci-hcd, don't force SLAB_ATOMIC allocations
o USB: usbcore misc cleanup (notably for non-dma hcds)
o USB: ehci-hcd updates
David Jeffery <[email protected]>:
o ips driver 1/4: fix struct length and remove dead code
o ips driver 2/4: initialization reordering
o ips driver 3/4: 64bit dma addressing
o ips driver 4/4: error messages
David Mosberger <[email protected]>:
o ia64: Add missing include of kernel/config.h
o ia64: Various updates: ia32 subsystem fix, tracing-support for
mmu-context switching, etc.
o ia64: Light-weight system call support (aka, "fsyscalls"). This
does not (yet) accelerate normal system calls, but it puts the
infrastructure in place and lets you write fsyscall-handlers to
your hearts content. A null system- call (such as getpid()) can
now run in as little as 35 cycles!
o ia64: Make asynchronous signal delivery work properly during
fsys-mode execution
o ia64: Fix some typos
o ia64: Add unwcheck.sh script contributed by Harish Patil. It
checks the unwind info for consistency (well, just the obvious
stuff, but it's a start).
o ia64: Fix Makefiles so that "make clean" removes the files
generated in the tools directory. Patch by Yu, Fenghua.
o Remove last vestiges of hugepage system calls (they have been
replaced by hugetlbfs)
o ia64: Don't risk running past the end of the unwind-table. Based
on a patch by Suresh Siddha.
o ia64: asm-ia64/system.h: Remove include of <linux/percpu.h>
o ia64: Sync up with 2.5.59
o ia64: More vmlinux.lds.S cleanups
o ia64: Switch over to using place-relative ("ip"-relative) entries
in the exception table.
o ia64: Check for acceptable version of gas before trying to build
the kernel. Old gas versions will result in buggy kernels that
will bugcheck all over the place (usually mount() is the first one
to fail).
o ia64: Fix typo
o ia64: Fix ARCH_DLINFO
o ia64: Add light-weight version of getppid(). Detect at boottime
whether the McKinley Erratum 9 workaround is needed and, if not,
patch the workaround bundles with NOPs.
o ia64: Fix potential perfmon deadlock. Patch by Stephane Eranian
o ia64: Correct erratum number (caught by Asit Mallick)
o ia64: Fix ia64_fls() so it works for all possible 64-bit values
o ia64: Use printk severity-levels where appropriate
David S. Miller <[email protected]>:
o [TCP]: Named struct initializers and tabbing fixes
o [IPSEC]: Clear SKB checksum state when mangling
o [TCP]: Add tcp_low_latency sysctl
o [SPARC64]: Kill references to hugepage syscalls
o [TCP]: In tcp_check_req, handle ACKless packets properly
o [TG3]: Let chip do pseudo-header csum on rx
o [TG3]: Add device IDs for 5704S/5702a3/5703a3
o [TG3]: Prevent dropped frames when flow-control is enabled
o [TG3]: Correct MIN_DMA and ONE_DMA settings in dma_rwctrl
o [TG3]: Workaround 5701 back-to-back register write bug
o [TG3]: Add workaround for third-party phy issues
o [TG3]: Remove anal grc_misc_cfg board IDs check
o [TG3]: Fix typos in previous changes
o [IPSEC]: Revert previous change to ip_route_connect
o [SPARC]: Add ndelay
o [FC4]: Update for scsi_cmnd changes
o [SCSI ESP]: Update for scsi_cmnd changes
o [SCSI QLOGICPTI]: Update for scsi_cmnd changes
o [SCSI PLUTO/FCAL]: Update for scsi_cmnd changes
Derek Atkins <[email protected]>:
o [IPSEC]: Block on connect for IPSEC keying
Douglas Gilbert <[email protected]>:
o SAM-3 status codes
o [SCSI] Add length checking to sprintf in sg
Duncan Sands <[email protected]>:
o export speedtouch usb info
o USB: trivial speedtouch changes
o USB: move udsl_atm_set_mac into speedtouch probe function
o USB: eliminate pointless dynamic allocation in speedtouch
o USB: move udsl_atm_startdevice into speedtouch probe function
o USB: rework error handling in speedtouch probe function
o USB: turn speedtouch micro race into a nano race
o USB: simplify speedtouch receive urb lifecycle
o USB speedtouch: add a new speedtouch encoding function
o USB speedtouch: let the tasklet do all processing of speedtouch
receive urbs
o USB speedtouch: re-recycle speedtouch receive buffers
o USB speedtouch: re-recycle failed speedtouch receive urbs
o USB speedtouch: re-wait for speedtouch completion handlers after
usb_unlink_urb
o USB speedtouch: re-cosmetic speedtouch changes
o USB speedtouch: tweak speedtouch status logic
o USB speedtouch: allocate speedtouch send urbs in the USB probe
routine
o USB speedtouch: earlier rejection of outgoing speedtouch packets
Frank Davis <[email protected]>:
o 2.5.59 : drivers/media/video/bt856.c
o 2.5.59 : drivers/media/video/saa7185.c
o 2.5.59 : drivers/media/video/bt819.c
Ganesh Varadarajan <[email protected]>:
o USB ipaq driver ids
Greg Kroah-Hartman <[email protected]>:
o USB acm: patch from dan carpenter <[email protected]> to fix typo
o USB: add a blank line between each device in usbfs/devices
o USB: fix to get usb-storage code to work again
o USB: added tripp device id's to pl2303 driver
o USB: fix up drivers the scsi people missed
o PCI Hotplug: dereference null variable cleanup patches
o IBM PCI Hotplug driver: Clean up the slot filename generation logic
a lot
o PCI Hotplug: change pci_hp_change_slot_info() to take a
hotplug_slot and not a string
o sysfs: add sysfs_update_file() function
o PCI Hotplug: Make pci_hp_change_slot_info() work again
o PCI Hotplug: moved the some stuff into the pci core
o PCI: put proper field sizes on sysfs files, and add class file
o Compaq PCI Hotplug: fix checker memory leak bugs
o IBM PCI Hotplug: fix memory leak found by checker project
o IBM PCI Hotplug: fix a load of memory leak errors found by the
checker project
o sysfs: remember to add EXPORT_SYMBOL() for sysfs_update_file
Henning Meier-Geinitz <[email protected]>:
o USB scanner.h, scanner.c: New vendor/product ids
o USB scanner.h, scanner.c: maintainer change
o USB scanner.c: Adjust syslog output
Ingo Molnar <[email protected]>:
o signal-fixes-2.5.59-A4
o Lock session and group ID setting
o lock group_send_sig_info() properly
Ivan Kokshaysky <[email protected]>:
o alpha_agpgart_size
o nautilus update
James Bottomley <[email protected]>:
o 3c509 fixes: correct MCA probing, add back ISA probe to Space.c
o [SCSI] make echo scsi add-single-device x x x x > /proc/scsi/scsi
work again
o [SCSI] Correct command leaks in the prep_fn
o [SCSI] Add missing list head init of cmd_list
o Fix 53c700 for scsi_cmnd field migration
o Correct compiler warnings with use of likely() on pointers
o Fix sr_ioctl.c bounce buffer usage
o move queue_depth check from scsi_prep_fn to scsi_request_fn
o Restore device command queue functionality
o [SCSI] Migrate sim710 to 53c700 chip driver
o [SCSI] Remove 53c7,8xx since we have plenty of alternatives
James Morris <[email protected]>:
o [IPSEC]: remove trailer_len from esp and xfrm properties
o [IPSEC]: Update ah documentation
o [IPSEC] Convert esp auth to use proper crypto api calls
o [IPSEC] Generic ICV handling for ESP
o [CRYPTO]: in/out scatterlist support for ciphers
o [IPV4]: Fix skb leak in inet_rtm_getroute
o [IPV6]: Fix skb leak in inet6_rtm_getroute
o [LSM]: networking hooks, kconfig bits
o [LSM]: Networking top-level socket operation hooks
o [LSM]: Networking socket SKB receive hook
o [LSM]: Networking AF_UNIX hooks
o [LSM]: Networking netlink socket capability hooks
Jamie Lokier <[email protected]>:
o [SPARC64]: Fix MAP_GROWSDOWN value, cannot be the same as
MAP_LOCKED
o CONFIG_PREEMPT fix of do_debug()
Jaroslav Kysela <[email protected]>:
o ALSA updates
Jeff Dike <[email protected]>:
o Converted all initializers over to C99 syntax
o Converted a few more initializers I missed on the first pass
o Merged the configurable kernel stack size changes from 2.4. This
paramerizes the kernel stack size and adds a config option to set
the order.
o Fixed a couple of problems with the configurable stack size changes
o Converted a bunch of inititializers in the drivers that I missed
o Missed an initializer in the ethertap backend
o Merged the 2.4 build changes which split the mode-specific stuff
into separate Makefiles and add the ability to build a dynamically
loaded binary.
o Moved skas_ptrace.h
o Moved the segment remapping code under arch/um/kernel/tt
o task_protections needed adjusting for configurable stack sizes
o Pulled in a number of other fixes which were needed to bring the
build up to date.
o Fixed handling of the linker script
o Fixed the archmrproper rule to not delete linker script sources
o Forward ported a bunch of cleanups from 2.4. Improved error
messages, slightly different formatting, removal of dead code, and
some stray C99 initializer conversions.
o Forwarded ported a number of skas-related fixes from 2.4
o Forward ported a number of bug fixes from 2.4, including SA_SIGINFO
signal delivery, protecting skas mode against tmpfs running out of
space, protecting the UML main thread against accidentally running
kernel code, and a couple of data corruption bugs.
o Fixed a few problems in the last merge
o Updates to bring UML up to 2.5.58
o Added gpl_ksymtab and kallsyms sections to the linker scripts
o Fixed a merge typo in Kconfig
o Fixed asm/modules.h to update UML to 2.5.59
o Some build changes for 2.5.59 and SMP. Also cleanup of the linker
scripts and Kconfig.
o Correctly check the mmap return value
o Some SMP fixes from Oleg
o Some SMP fixes
o Fixed dyn.lds.S to include common.lds.S
o Ported a cleanup from 2.4
o Ported a uml-config.h change from 2.4
o Ported a cleanup from 2.4
o Changed some CONFIG_* names to UML_CONFIG_* names
o A bunch of minor changes ported up from 2.4
o Fixed the time locking bug
o Changed CONFIG_KERNEL_STACK_ORDER to UML_CONFIG_KERNEL_STACK_ORDER
o Replaced some CONFIG_* with UML_CONFIG_*
o Replaced a CONFIG_* name with a UML_CONFIG_* name
o Changed some CONFIG_* symbols to UML_CONFIG_*
o Added vmlinux.lds.S which is now necessary for linking the vmlinux
Jeff Garzik <[email protected]>:
o [netdrvr tg3] s/spin_lock/spin_lock_irqsave/ in tg3_poll and
tg3_timer
o [netdrvr tg3] Better interrupt masking
o [netdrvr tg3] flush irq-mask reg write before checking hw status
block, in tg3_enable_ints.
o [netdrvr tg3] manage jumbo flag on MTU change when interface is
down
o [netdrvr e100] remove e100_proc.c. should have been in prior cset
o [netdrvr tg3] more verbose failures, during initialization
o [netdrvr tg3] bump version, tidy comments
Jeff Wiedemeier <[email protected]>:
o NODE_BALANCE_RATE (numa)
o mark boot_cpu online in smp_prepare_boot_cpu
o remove srmcons_allowed implementation from marvel
o use CONFIG_EARLY_PRINTK to turn off "srmcons" prints
o fix /proc/interrupts on smp alpha kernels
Justin T. Gibbs <[email protected]>:
o Aic7xxx and Aic79xx DV Fix
o Aic79xx Driver Update Enable abort and bus device reset handlers
for both legacy and packetized connections.
o Aic7xxx Driver Update
o Bump aic7xxx driver version to 6.2.27
o Aic7xxx and Aic79xx Driver Update Force an SDTR after a rejected
WDTR if the syncrate is unkonwn.
o Aic7xxx Driver Update 6.2.28
o Update Aic7xxx and Aic79xx driver documentation
o Bump aic79xx driver version number to 1.3.0, now that it has passed
functional test.
Kai Germaschewski <[email protected]>:
o kbuild: Fix __start_SECTION, __stop_SECTION
o kbuild: Remove -DEXPORT_SYMTAB switch
o kbuild: Remove obsolete CONFIG_MODVERSIONS cruft
o kbuild: Add CONFIG_MODVERSIONING and __kcrctab
o kbuild: Generate versions for exported symbols
o kbuild/modules: Check __vermagic for validity
o kbuild/modules: Don't save the license string
o kbuild/modules: Track versions of exported symbols
o kbuild: Always link module (.ko) from associated (.o)
o kbuild: Don't build final .ko yet when descending with
CONFIG_MODVERSIONING
o kbuild/modules: Record versions for unresolved symbols
o kbuild/modules: Return the index of the symbol from __find_symbol()
o kbuild/modules: Check module symbol versions on insmod
o kbuild: Add cscope support to Makefile
o kbuild: gcc-3.3 warns about 2.5.59 EXPORT_SYMBOL
o kbuild: Move the definition of MODVERDIR
o kbuild: Rename CONFIG_MODVERSIONING -> CONFIG_MODVERSIONS
o kbuild: Generate module versions in the normal object directories
o kbuild: Assorted fixlets
o kbuild: Remove export-objs := ... statements
o kbuild: Don't default to building modules when not selected
o kbuild: Handle external SUBDIRS with modversions
o kbuild: Warn on obsolete export-objs use
o kbuild: Modversions fix
o kbuild: Add a bug trap for people playing with SUBDIRS too much
Kunihiro Ishiguro <[email protected]>:
o [XFRM]: Add family member to xfrm_usersa_id
Lennert Buytenhek <[email protected]>:
o [BRIDGE]: Update maintainership status
o [BRIDGE]: handle out-of-ports corner case
Linus Torvalds <[email protected]>:
o Make threaded core-dump names use the tgid instead of the pid.
Makes sense now that we can dump all threads in one core-dump.
o Atyfb_base compile fix from Andres Salomon <[email protected]>
o Fix up manual merge error in usb/storage/scsiglue.c
o Fix Makefile syntax error for (deprecated) "make dep"
o Don't special-case SIGKILL/SIGSTOP - the blocking masks should
already take care of it.
o Split up "struct signal_struct" into "signal" and "sighand" parts
o More signal handling fixups for the threaded signal fix upheavals
o Make sigprocmask() available to kernel threads too, since a lot of
them do want to temporarily block signals.
o Fix missing break, causing sigprocmask(SIG_SETMASK ...) to always
return an error.
o Create "wake_up_state()" macro that selectively wakes up processes
only from certain states.
o Wake up a stopped task _after_ having marked the SIGCONT pending,
so that there isn't any window for running before the signal
handler has been invoced.
Luben Tuikov <[email protected]>:
o [SCSI] Move cmd->{lun, target, channel} to cmd->device->{lun, id,
channel}
o [SCSI] Move cmd->host to cmd->device->host
o cmd_alloc54-3.patch [3/3]
o [SCSI] add commands at the tail of cmd_list
Manish Lachwani <[email protected]>:
o [netdrvr tg3] add support for another 5704 board, fix up 5704 phy
init
Mark Haverkamp <[email protected]>:
o fix megaraid driver compile error
Martin Devera <[email protected]>:
o [NET_SCHED]: HTB scheduler updates from Devik
Matt Domsch <[email protected]>:
o EDD: fix raw_data file and edd_has_edd30(), misc cleanups
o EDD: Until scsi layer is fixed, don't make symlink to scsi disk
o EDD: until SCSI layer sysfs is fixed, don't use it for raw_data
either
o EDD: don't over-allocate EDD data block
Matthew Dharm <[email protected]>:
o usb-storage: fix typo
o usb-storage: fix oops
o usb-storage: move to SCSI hotplugging
o usb-storage: comments, cleanup
o usb-storage: remove US_FL_DEV_ATTACHED
o usb-storage: convert spaces to tabs
o Replace a line of code that shouldn't have been removed
o USB usb-storage: host a host refcount a little bit longer
o USB usb-storage: implement device-offline code
o USB usb-storage: implement clearing of device queue
Matthew Dobson <[email protected]>:
o Broken CLEAR_BITMAP() macro
Matthew Wilcox <[email protected]>:
o PA-RISC updates for 2.5.59
Mike Anderson <[email protected]>:
o [SCSI] fix scsi_find_device()
Mikulas Patocka <[email protected]>:
o simple EXT2 patch
Nathan Laredo <[email protected]>:
o stradis.c "proper" port to 2.5.x
Oleg Drokin <[email protected]>:
o fix HZ=100 case with 64 bit jiffies
Patrick Mansfield <[email protected]>:
o add back single_lun support
Patrick McHardy <[email protected]>:
o [PPP]: Handle filtering drops correctly
Pete Zaitcev <[email protected]>:
o [SUN PARTITION]: Advance slot properly while scanning
o [SPARC]: Kill smp_found_cpus declaration
Petko Manolov <[email protected]>:
o USB: pegasus & mii cset
Philipp G?hring <[email protected]>:
o USB: FTDI driver, new id added
Randy Dunlap <[email protected]>:
o PCI Hotplug: memory leaks in acpiphp_glue
o do_mounts memory leak
o quota memleak
Randy Dunlap <[email protected]>:
o fix references to discarded sections
o PCI Hotplug: checker patches
Richard Henderson <[email protected]>:
o [ALPHA] Add debugging access (core and ptrace) to the PAL unique
value. Support threaded core dumps.
o [ALPHA] New SRM console driver
Rik van Riel <[email protected]>:
o Re: [CHECKER] 112 potential memory leaks in 2.5.48
Robert Olsson <[email protected]>:
o [netdrvr e1000] NAPI fixes
Rohit Seth <[email protected]>:
o ia64: Update to hugetlb
Roland McGrath <[email protected]>:
o Make sys_wait4() more readable
o exit_notify/do_exit cleanup
o SA_NOCLDWAIT now supported - update comments
o do_sigaction locking cleanup
o TASK_STOPPED wakeup cleanup
o zap_other_threads() needs tasklist_lock held
Russell King <[email protected]>:
o disassociate_ctty SMP fix
o Fix Alt-SysRQ-T status, and comment
Russell King <[email protected]>:
o [ARM] Fix printk in rpcmouse.c
o [ARM] Fix buffer overflow in fas216-based SCSI drivers
o [ARM] Fix fas216-based data-phase lockups
o [ARM] Add soft-cursor support to acornfb and sa1100fb
o [ARM] Make oops dump reasonble again without kallsyms support
enabled
o [ARM] Drop "alloc" flag for the .stack segment
o [ARM] Add one CPU device to the driver model
o [ARM] Kill build warnings for Integrator PCI V3 driver
o [ARM] Fix KSTK_EIP and KSTK_ESP macros
o [ARM] Add extra IO functionality
o [ARM] Convert ecard to allow use of ioremap + {read,write}[bwl]
o [ARM] Update Acorn SCSI drivers
o [ARM] Add linux/errno.h include to allow pcf8583.c to build
o [ARM] Remove 200Hz -> 100Hz conversion for ebsa110 timer
o [ARM] Include ARM architecture version in module "version" string
o [ARM PATCH] 1361/1: EPXA10DB: Correct some typos in uart00.c
o [ARM PATCH] 1348/1: Add support for the HackKit board
o [ARM PATCH] 1097/3: trizeps IDE support
o [ARM PATCH] 1096/4: trizeps PCMCIA support
o [ARM PATCH] 1091/3: support for trizeps board (SA1110-based)
o [ARM] Make trizeps_map_io static
o [ARM] Ensure GCC uses frame pointers when we want them
o [ARM] Add missing #endif
o [ARM] Remove IRQ desc->enabled in favour of testing disable_depth
o [ARM] Add arch/arm/common
Rusty Russell <[email protected]>:
o kbuild: Modversions fixes
o kbuild: Ignore kernel version part of vermagic if
CONFIG_MODVERSIONS
o [patch, 2.5] scsi_qla1280.c free on error path
o 2.5.59 add two help texts to drivers_scsi_Kconfig
o Documentation_Changes
o Remove superflous 'either'
o fix comment in module.c
o remove check_region from drivers_net_irda_irport.c
o parport_pc and !CONFIG_PNP
o Change "char _version" to "char in drivers_lcs.c
o add one help text to drivers_atm_Kconfig
o scripts_ver_linux
o Change "char _version" to "char in drivers_net_mac8390.c
o add two help texts to drivers_i2c_Kconfig
o Remove compile warning from fs_xfs_support_move.c
o make i2c-core driver_lock static
o Memory leak in drivers_net_arlan.c (1)
o RTC alarm and wildcards
o fix typo of members name in drivers_mtd_ftl.c
o Fix return code of init_module in drivers_net_arlan.c (2)
o Kill unused code
o remove LinuxVersionCode from de4x5.h
o nfs_write.c warning
o Squash unused function in fs_nfs_mount_clnt.c
o fix spelling of kernel in arch_v850_kernel_mach.h
o fix linewrap in Documentation_arm_SA1100_CERF
o swsusp: do not panic on bad signature with noresume
o add six help texts to drivers_ide_Kconfig
o add four help texts to drivers_char_watchdog_Kconfig
o Change "char version" to initdata in drivers_net_tulip_de4x5.c
o add two help texts to drivers_media_video_Kconfig
o Write with buffer>2GB returns broken errno (2)
o Change all <module>.o to .ko in Kconfig files
Sam Ravnborg <[email protected]>:
o kbuild: arch{mrproper,clean} no longer mandatory
o kbuild/all archs: Removed unused arch{clean,rproper} targets
o kbuild: HEAD replaced with head-y
o kbuild/all archs: Replace HEAD with head-y
o kbuild: Update Documentation/kbuild/makefiles.txt
o Documentation/modules.txt: How to compile modules outside the
kernel tree
o kbuild: Removed Documentation/kbuild/bug-list.txt
o kbuild: Enable the syntax "make dir/"
o kbuild: Made cmd_link_multi readable
o kbuild: ld_flags used consistently in Makefile.build
Scott Feldman <[email protected]>:
o [netdrvr e100] udelay a better way
o [netdrvr e100] fix TxDescriptor bit setting
o [netdrvr e100] standardize nic-specific stats support
o [netdrvr e1000] ethtool eeprom buffer dynamic allocation, rather
than large static allocation on the stack
o [netdrvr e1000] remove /proc support (superceded by ETHTOOL_GSTATS)
o [netdrvr e1000] add ETHTOOL_GSTATS support
o [netdrvr e1000] TSO fixes and cleanups
o [netdrvr e100] math fixes and a cleanup
Sridhar Samudrala <[email protected]>:
o [IPV{4,6}]: Add ipfragok arg to ip_queue_xmit
Stanley Wang <[email protected]>:
o PCI Hotplug: Replace pcihpfs with sysfs
o PCI Hotplug: Remove procfs stuff from pci_hotplug_core
Stephen Hemminger <[email protected]>:
o x86_64 gettimeofday bug
o seqlock for xtime
Stephen Lord <[email protected]>:
o [XFS] Transaction A is in callback processing unpinning a buffer,
Transaction B is in the process of marking the buffer stale.
o [XFS] Do not release the last iclog of a transaction before we get
our callbacks attached to it. Otherwise we can end up executing the
callback out of order.
o [XFS] fix initialization of bio in end case where we are dealing
with sub page sized requests.
Stephen Rothwell <[email protected]>:
o [COMPAT]: compat_{old_}sigset_t sparc64
o ia64: [COMPAT] Eliminate the rest of the __kernel_..._t32 typedefs
o ia64: [COMPAT] {get,put}_compat_timspec 5/8
o ia64: [COMPAT] compat_{old_}sigset_t
o ia64: [COMPAT] compat_sys_sigpending and compat_sys_sigprocmask
o ia64: [COMPAT] compat_sys_[f]statfs
Steven Cole <[email protected]>:
o [NETFILTER]: Update Kconfig help text to match 2.4.x
o Spelling fixes
o Spelling fixes for consistent, dependent, persistent
o Finish job of trimming ".o" module extension in Kconfig files
St?phane Eranian <[email protected]>:
o ia64: perfmon update
o ia64: fix PSR bug in perfmon code and switch to C99 initializers
o ia64: fix return type of sys_perfmonctl()
Thomas Walpuski <[email protected]>:
o [IPSEC]: Fix some buglets in xfrm_user.c
Tim Schmielau <[email protected]>:
o use 64 bit jiffies: infrastructure
o use 64 bit jiffies: fix utime wrap
o use 64 bit jiffies: 64-bit process start time
Vojtech Pavlik <[email protected]>:
o USB: Add an entry in cdc-acm.c for devices with ACM class (some
Motorola phones)
o USB: additions to hid-core.c blacklist
o x86-64: Minor fixes to make the kernel compile and remove warnings
Willem Riede <[email protected]>:
o [osst] fix bugzilla 244 (SRpnt initialisation problem)
Hi,
[an impressive ammount of patches since 2.5.59] but,
an error during first 30 second of compilation occurs:
gcc -Wp,-MD,arch/i386/kernel/.time.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=i686
-Iinclude/asm-i386/mach-default -fomit-frame-pointer -nostdinc
-iwithprefix include -DKBUILD_BASENAME=time -DKBUILD_MODNAME=time -c -o
arch/i386/kernel/.tmp_time.o arch/i386/kernel/time.c
ld:arch/i386/kernel/.tmp_time.ver:1: syntax error
Here's the config:
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_PREFETCH=y
CONFIG_X86_SSE2=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=y
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_CSZ is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP3 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_CIFS=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_BIOS_REBOOT=y
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
>...
> Summary of changes from v2.5.59 to v2.5.60
> ============================================
>...
> Dave Kleikamp <[email protected]>:
>...
> o JFS: replace ugly JFS debug macros with simpler ones
>...
This broke the compilation with gcc 2.95:
<-- snip -->
...
gcc -Wp,-MD,fs/jfs/.super.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-D_JFS_4K -DKBUILD_BASENAME=super -DKBUILD_MODNAME=jfs -c -o
fs/jfs/super.o fs/jfs/super.c
fs/jfs/super.c: In function `jfs_fill_super':
fs/jfs/super.c:335: parse error before `)'
make[2]: *** [fs/jfs/super.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Another compiler error that's been around for a little while:
Looks like some weird gcc problem.
gcc version: 2.95.4 20011002 (Debian prerelease)
make -f scripts/Makefile.build obj=scripts
make -f scripts/Makefile.build obj=drivers/md drivers/md/linear.o
gcc -Wp,-MD,drivers/md/.linear.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=i686
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-DKBUILD_BASENAME=linear -DKBUILD_MODNAME=linear -c -o
drivers/md/linear.o drivers/md/linear.c
drivers/md/linear.c: In function `linear_run':
drivers/md/linear.c:159: Internal compiler error:
drivers/md/linear.c:159: internal error--unrecognizable insn:
(insn 316 315 673 (parallel[
(set (reg:SI 0 %eax)
(asm_operands ("") ("=a") 0[
(reg:DI 1 %edx)
]
[
(asm_input:DI ("A"))
] ("drivers/md/linear.c") 115))
(set (reg:SI 1 %edx)
(asm_operands ("") ("=d") 1[
(reg:DI 1 %edx)
]
[
(asm_input:DI ("A"))
] ("drivers/md/linear.c") 115))
] ) -1 (insn_list 313 (nil))
(nil))
make[1]: *** [drivers/md/linear.o] Error 1
make: *** [drivers/md/linear.o] Error 2
Current .config:
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_PREFETCH=y
CONFIG_X86_SSE2=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_NR_CPUS=32
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_CARD is not set
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=64
CONFIG_AIC7XXX_RESET_DELAY_MS=2000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_SCSI_PCMCIA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=y
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_INTEL_RNG=y
# CONFIG_AMD_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP3 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_AMD_8151 is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
CONFIG_UDF_FS=y
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
# CONFIG_CIFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
Your config does show up another but in the ncpfs code.
Given the comment, perhaps a simple patch is not appropriate:
gcc -Wp,-MD,fs/ncpfs/.sock.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=pentium4
-Iinclude/asm-i386/mach-default -fomit-frame-pointer -nostdinc
-iwithprefix include -DKBUILD_BASENAME=sock -DKBUILD_MODNAME=ncpfs -c
-o fs/ncpfs/.tmp_sock.o fs/ncpfs/sock.c
fs/ncpfs/sock.c: In function `ncp_do_request':
fs/ncpfs/sock.c:760: structure has no member named `sig'
fs/ncpfs/sock.c:762: structure has no member named `sig'
---------------------------------------------------
if (server->m.flags & NCP_MOUNT_INTR) {
/* FIXME: This doesn't seem right at all. So, like,
we can't handle SIGINT and get whatever to stop?
What if we've blocked it ourselves? What about
alarms? Why, in fact, are we mucking with the
sigmask at all? -- r~ */
>>>> if (current->sig->action[SIGINT - 1].sa.sa_handler == SIG_DFL)
mask |= sigmask(SIGINT);
if (current->sig->action[SIGQUIT - 1].sa.sa_handler == SIG_DFL)
mask |= sigmask(SIGQUIT);
}
On Mon, 2003-02-10 at 12:41, Maciej Soltysiak wrote:
> Hi,
>
> [an impressive ammount of patches since 2.5.59] but,
> an error during first 30 second of compilation occurs:
>
> gcc -Wp,-MD,arch/i386/kernel/.time.o.d -D__KERNEL__ -Iinclude -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=i686
> -Iinclude/asm-i386/mach-default -fomit-frame-pointer -nostdinc
> -iwithprefix include -DKBUILD_BASENAME=time -DKBUILD_MODNAME=time -c -o
> arch/i386/kernel/.tmp_time.o arch/i386/kernel/time.c
> ld:arch/i386/kernel/.tmp_time.ver:1: syntax error
>
> Here's the config:
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_SWAP=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # General setup
> #
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_PREFETCH=y
> CONFIG_X86_SSE2=y
> # CONFIG_HUGETLB_PAGE is not set
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_MCE is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # Power management options (ACPI, APM)
> #
> # CONFIG_PM is not set
>
> #
> # ACPI Support
> #
> # CONFIG_ACPI is not set
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_SCx200 is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
>
> #
> # Executable file formats
> #
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> # CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL device support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_BLK_DEV_GENERIC is not set
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> CONFIG_BLK_DEV_RZ1000=y
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_BLK_DEV_IDE_MODES=y
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_NETFILTER=y
> CONFIG_NETFILTER_DEBUG=y
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_NAT=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_TOS=y
> # CONFIG_IP_ROUTE_VERBOSE is not set
> # CONFIG_IP_ROUTE_LARGE_TABLES is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_XFRM_USER is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> # CONFIG_IP_NF_IRC is not set
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_PKTTYPE=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> CONFIG_IP_NF_MATCH_AH_ESP=m
> CONFIG_IP_NF_MATCH_LENGTH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_TCPMSS=m
> CONFIG_IP_NF_MATCH_HELPER=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_CONNTRACK=m
> CONFIG_IP_NF_MATCH_UNCLEAN=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_MIRROR=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_NAT_LOCAL=y
> CONFIG_IP_NF_NAT_SNMP_BASIC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
> # CONFIG_IP_NF_COMPAT_IPFWADM is not set
> CONFIG_IPV6=y
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_LIMIT=m
> CONFIG_IP6_NF_MATCH_MAC=m
> CONFIG_IP6_NF_MATCH_MULTIPORT=m
> CONFIG_IP6_NF_MATCH_OWNER=m
> CONFIG_IP6_NF_MATCH_MARK=m
> CONFIG_IP6_NF_MATCH_LENGTH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_MARK=m
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> # CONFIG_NET_SCH_CSZ is not set
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_POLICE=y
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_MII is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=y
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_PCI is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices (depends on LLC=y)
> #
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # I2C Hardware Sensors Mainboard support
> #
>
> #
> # I2C Hardware Sensors Chip support
> #
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_AMD_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP3 is not set
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_AMD_8151 is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_JFS_FS=m
> # CONFIG_JFS_POSIX_ACL is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_XFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> CONFIG_NFS_V4=y
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_SUNRPC=y
> # CONFIG_SUNRPC_GSS is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_CIFS=y
> CONFIG_SMB_FS=y
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_NCP_FS=y
> CONFIG_NCPFS_PACKET_SIGNING=y
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> CONFIG_NCPFS_STRONG=y
> CONFIG_NCPFS_NFS_NS=y
> CONFIG_NCPFS_OS2_NS=y
> # CONFIG_NCPFS_SMALLDOS is not set
> CONFIG_NCPFS_NLS=y
> CONFIG_NCPFS_EXTRAS=y
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-2"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> CONFIG_NLS_CODEPAGE_852=y
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> CONFIG_NLS_CODEPAGE_1250=y
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=y
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> # CONFIG_SND is not set
>
> #
> # Open Sound System
> #
> CONFIG_SOUND_PRIME=y
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> CONFIG_SOUND_ICH=y
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_KALLSYMS is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Library routines
> #
> # CONFIG_CRC32 is not set
> CONFIG_X86_BIOS_REBOOT=y
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Stephen Hemminger <[email protected]>
Open Source Devlopment Lab
Looks like ->sig should be ->signal ??
--James
-----Original Message-----
From: Stephen Hemminger [mailto:[email protected]]
Sent: Monday, February 10, 2003 1:12 PM
To: Maciej Soltysiak
Cc: Linus Torvalds; Linux Kernel Mailing List
Subject: Re: Linux 2.5.60
Your config does show up another but in the ncpfs code.
Given the comment, perhaps a simple patch is not appropriate:
gcc -Wp,-MD,fs/ncpfs/.sock.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=pentium4
-Iinclude/asm-i386/mach-default -fomit-frame-pointer -nostdinc
-iwithprefix include -DKBUILD_BASENAME=sock -DKBUILD_MODNAME=ncpfs -c
-o fs/ncpfs/.tmp_sock.o fs/ncpfs/sock.c
fs/ncpfs/sock.c: In function `ncp_do_request':
fs/ncpfs/sock.c:760: structure has no member named `sig'
fs/ncpfs/sock.c:762: structure has no member named `sig'
---------------------------------------------------
if (server->m.flags & NCP_MOUNT_INTR) {
/* FIXME: This doesn't seem right at all. So, like,
we can't handle SIGINT and get whatever to stop?
What if we've blocked it ourselves? What about
alarms? Why, in fact, are we mucking with the
sigmask at all? -- r~ */
>>>> if (current->sig->action[SIGINT - 1].sa.sa_handler ==
SIG_DFL)
mask |= sigmask(SIGINT);
if (current->sig->action[SIGQUIT - 1].sa.sa_handler ==
SIG_DFL)
mask |= sigmask(SIGQUIT);
}
On Mon, 2003-02-10 at 12:41, Maciej Soltysiak wrote:
> Hi,
>
> [an impressive ammount of patches since 2.5.59] but,
> an error during first 30 second of compilation occurs:
>
> gcc -Wp,-MD,arch/i386/kernel/.time.o.d -D__KERNEL__ -Iinclude -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
-fno-common
> -pipe -mpreferred-stack-boundary=2 -march=i686
> -Iinclude/asm-i386/mach-default -fomit-frame-pointer -nostdinc
> -iwithprefix include -DKBUILD_BASENAME=time -DKBUILD_MODNAME=time
-c -o
> arch/i386/kernel/.tmp_time.o arch/i386/kernel/time.c
> ld:arch/i386/kernel/.tmp_time.ver:1: syntax error
>
> Here's the config:
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_SWAP=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # General setup
> #
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_PREFETCH=y
> CONFIG_X86_SSE2=y
> # CONFIG_HUGETLB_PAGE is not set
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_MCE is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # Power management options (ACPI, APM)
> #
> # CONFIG_PM is not set
>
> #
> # ACPI Support
> #
> # CONFIG_ACPI is not set
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_SCx200 is not set
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
>
> #
> # Executable file formats
> #
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> # CONFIG_PNP is not set
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL device support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_BLK_DEV_GENERIC is not set
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> CONFIG_BLK_DEV_RZ1000=y
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_BLK_DEV_IDE_MODES=y
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> # CONFIG_NETLINK_DEV is not set
> CONFIG_NETFILTER=y
> CONFIG_NETFILTER_DEBUG=y
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_NAT=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_TOS=y
> # CONFIG_IP_ROUTE_VERBOSE is not set
> # CONFIG_IP_ROUTE_LARGE_TABLES is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_XFRM_USER is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_FTP=m
> # CONFIG_IP_NF_IRC is not set
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_LIMIT=m
> CONFIG_IP_NF_MATCH_MAC=m
> CONFIG_IP_NF_MATCH_PKTTYPE=m
> CONFIG_IP_NF_MATCH_MARK=m
> CONFIG_IP_NF_MATCH_MULTIPORT=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> CONFIG_IP_NF_MATCH_AH_ESP=m
> CONFIG_IP_NF_MATCH_LENGTH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_TCPMSS=m
> CONFIG_IP_NF_MATCH_HELPER=m
> CONFIG_IP_NF_MATCH_STATE=m
> CONFIG_IP_NF_MATCH_CONNTRACK=m
> CONFIG_IP_NF_MATCH_UNCLEAN=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_MIRROR=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_NAT_LOCAL=y
> CONFIG_IP_NF_NAT_SNMP_BASIC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_MARK=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
> # CONFIG_IP_NF_COMPAT_IPFWADM is not set
> CONFIG_IPV6=y
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_LIMIT=m
> CONFIG_IP6_NF_MATCH_MAC=m
> CONFIG_IP6_NF_MATCH_MULTIPORT=m
> CONFIG_IP6_NF_MATCH_OWNER=m
> CONFIG_IP6_NF_MATCH_MARK=m
> CONFIG_IP6_NF_MATCH_LENGTH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_MARK=m
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> # CONFIG_NET_SCH_CSZ is not set
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_POLICE=y
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_MII is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=y
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_PCI is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices (depends on LLC=y)
> #
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # I2C Hardware Sensors Mainboard support
> #
>
> #
> # I2C Hardware Sensors Chip support
> #
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_AMD_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP3 is not set
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_VIA is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_AMD_8151 is not set
> # CONFIG_DRM is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_JFS_FS=m
> # CONFIG_JFS_POSIX_ACL is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_XFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> CONFIG_NFS_V4=y
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_SUNRPC=y
> # CONFIG_SUNRPC_GSS is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_CIFS=y
> CONFIG_SMB_FS=y
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_NCP_FS=y
> CONFIG_NCPFS_PACKET_SIGNING=y
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> CONFIG_NCPFS_STRONG=y
> CONFIG_NCPFS_NFS_NS=y
> CONFIG_NCPFS_OS2_NS=y
> # CONFIG_NCPFS_SMALLDOS is not set
> CONFIG_NCPFS_NLS=y
> CONFIG_NCPFS_EXTRAS=y
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-2"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> CONFIG_NLS_CODEPAGE_852=y
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> CONFIG_NLS_CODEPAGE_1250=y
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=y
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> # CONFIG_SND is not set
>
> #
> # Open Sound System
> #
> CONFIG_SOUND_PRIME=y
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> CONFIG_SOUND_ICH=y
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_KALLSYMS is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Library routines
> #
> # CONFIG_CRC32 is not set
> CONFIG_X86_BIOS_REBOOT=y
> -
> To unsubscribe from this list: send the line "unsubscribe
linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Stephen Hemminger <[email protected]>
Open Source Devlopment Lab
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
On Monday 10 February 2003 15:06, James Lamanna wrote:
> Another compiler error that's been around for a little while:
> Looks like some weird gcc problem.
> gcc version: 2.95.4 20011002 (Debian prerelease)
>
> make -f scripts/Makefile.build obj=scripts
> make -f scripts/Makefile.build obj=drivers/md drivers/md/linear.o
> gcc -Wp,-MD,drivers/md/.linear.o.d -D__KERNEL__ -Iinclude -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=i686
> -Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
> -DKBUILD_BASENAME=linear -DKBUILD_MODNAME=linear -c -o
> drivers/md/linear.o drivers/md/linear.c
> drivers/md/linear.c: In function `linear_run':
> drivers/md/linear.c:159: Internal compiler error:
> drivers/md/linear.c:159: internal error--unrecognizable insn:
> (insn 316 315 673 (parallel[
> (set (reg:SI 0 %eax)
> (asm_operands ("") ("=a") 0[
> (reg:DI 1 %edx)
> ]
> [
> (asm_input:DI ("A"))
> ] ("drivers/md/linear.c") 115))
> (set (reg:SI 1 %edx)
> (asm_operands ("") ("=d") 1[
> (reg:DI 1 %edx)
> ]
> [
> (asm_input:DI ("A"))
> ] ("drivers/md/linear.c") 115))
> ] ) -1 (insn_list 313 (nil))
> (nil))
> make[1]: *** [drivers/md/linear.o] Error 1
> make: *** [drivers/md/linear.o] Error 2
I have been getting this same error for several kernel versions
now. I have fixed it with the following patch.
==========
--- linux-2.5.59a/drivers/md/linear.c Thu Jan 16 20:22:04 2003
+++ linux-2.5.59b/drivers/md/linear.c Fri Jan 31 15:00:48 2003
@@ -111,6 +111,9 @@
}
{
+#if __GNUC__ < 3
+ volatile
+#endif
sector_t sz = md_size[mdidx(mddev)];
unsigned round = sector_div(sz, conf->smallest->size);
nb_zone = conf->nr_zones = sz + (round ? 1 : 0);
==========
I believe I found it in the lkml archives, but...I have no idea if this
is the correct fix. I also get a very similar error in fs/readdir.c:
==========
make -f scripts/Makefile.build obj=fs
gcc -Wp,-MD,fs/.readdir.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -Iinclude/asm-i386/mach-default -g -nostdinc -iwithprefix include -DKBUILD_BASENAME=readdir -DKBUILD_MODNAME=readdir -c -o fs/readdir.o fs/readdir.c
fs/readdir.c: In function `filldir64':
fs/readdir.c:242: internal error--unrecognizable insn:
(insn 184 183 657 (set (reg/v:SI 4 %esi)
(asm_operands/v ("1: movl %%eax,0(%2)
2: movl %%edx,4(%2)
3:
.section .fixup,"ax"
4: movl %3,%0
jmp 3b
.previous
.section __ex_table,"a"
.align 4
.long 1b,4b
.long 2b,4b
.previous") ("=r") 0[
(reg:DI 1 %edx)
(reg:SI 0 %eax)
(const_int -14 [0xfffffff2])
(reg/v:SI 4 %esi)
]
[
(asm_input:DI ("A"))
(asm_input:SI ("r"))
(asm_input:SI ("i"))
(asm_input:SI ("0"))
] ("fs/readdir.c") 226)) -1 (insn_list 181 (insn_list 183 (nil)))
(nil))
make[1]: *** [fs/readdir.o] Error 1
make: *** [fs] Error 2
==========
which I've managed to fix with this patch:
==========
--- linux-2.5.59a/fs/readdir.c Thu Jan 16 20:22:08 2003
+++ linux-2.5.59b/fs/readdir.c Fri Jan 31 15:00:25 2003
@@ -216,14 +216,14 @@
return -EINVAL;
dirent = buf->previous;
if (dirent) {
- if (__put_user(offset, &dirent->d_off))
+ if (put_user(offset, &dirent->d_off))
goto efault;
}
dirent = buf->current_dir;
buf->previous = dirent;
- if (__put_user(ino, &dirent->d_ino))
+ if (put_user(ino, &dirent->d_ino))
goto efault;
- if (__put_user(0, &dirent->d_off))
+ if (put_user(0, &dirent->d_off))
goto efault;
if (__put_user(reclen, &dirent->d_reclen))
goto efault;
@@ -268,9 +268,12 @@
error = buf.error;
lastdirent = buf.previous;
if (lastdirent) {
+#if __GNUC__ < 3
+ volatile
+#endif
struct linux_dirent64 d;
d.d_off = file->f_pos;
- __put_user(d.d_off, &lastdirent->d_off);
+ put_user(d.d_off, &lastdirent->d_off);
error = count - buf.count;
}
==========
I'm using gcc 2.95.2. It looks to me like there is a problem with
gcc handling certain 64-bit data fields.
Anyone else seeing these errors? Any comments on the validity of
the above patches?
Thanks,
--
Kevin Corry
[email protected]
http://evms.sourceforge.net/
>>> This broke the compilation with gcc 2.95:
<-- snip -->
...
gcc -Wp,-MD,fs/jfs/.super.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-D_JFS_4K -DKBUILD_BASENAME=super -DKBUILD_MODNAME=jfs -c -o
fs/jfs/super.o fs/jfs/super.c
fs/jfs/super.c: In function `jfs_fill_super':
fs/jfs/super.c:335: parse error before `)'
make[2]: *** [fs/jfs/super.o] Error 1
<-- snip -->
Curious as to what gcc 2.95 version you are using.
Seems to compile fine with:
gcc 2.95.4 20011002
--James
On Mon, Feb 10, 2003 at 01:06:12PM -0800, James Lamanna wrote:
> Another compiler error that's been around for a little while:
> Looks like some weird gcc problem.
> gcc version: 2.95.4 20011002 (Debian prerelease)
Your compiler blew up. Tell the debian gcc folks.
(http://bugs.debian.org iirc)
Dave
--
| Dave Jones. http://www.codemonkey.org.uk
| SuSE Labs
Compile statistics: 2.5.60
Note that gcc 3.2 was used for all of these statistics. gcc 2.95 is
much more lenient on warnings and errors.
2.5.59 2.5.60
-------------------- -----------------
bzImage (defconfig) 20 warnings 21 warnings
0 errors 0 errors
bzImage (allmodconfig) 32 warnings 37 warnings
9 errors 9 errors
modules (allmodconfig) 3119 warnings 3079 warnings
159 errors 138 errors
Compile statistics have been for kernel releases from 2.5.46 to 2.5.60
at: http://www.osdl.org/archive/cherry/stability
John
--
John Cherry <[email protected]>
On Mon, Feb 10, 2003 at 03:38:40PM -0600, Kevin Corry wrote:
> On Monday 10 February 2003 15:06, James Lamanna wrote:
> > Another compiler error that's been around for a little while:
> > Looks like some weird gcc problem.
> > gcc version: 2.95.4 20011002 (Debian prerelease)
> >
> > make -f scripts/Makefile.build obj=scripts
> > make -f scripts/Makefile.build obj=drivers/md drivers/md/linear.o
> > gcc -Wp,-MD,drivers/md/.linear.o.d -D__KERNEL__ -Iinclude -Wall
> > -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
> > -pipe -mpreferred-stack-boundary=2 -march=i686
> > -Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
> > -DKBUILD_BASENAME=linear -DKBUILD_MODNAME=linear -c -o
> > drivers/md/linear.o drivers/md/linear.c
> > drivers/md/linear.c: In function `linear_run':
> > drivers/md/linear.c:159: Internal compiler error:
> > drivers/md/linear.c:159: internal error--unrecognizable insn:
> > (insn 316 315 673 (parallel[
[snipped]
> Anyone else seeing these errors? Any comments on the validity of
> the above patches?
This bug has been around for a while ... it's tracked in bugzilla in
bug http://bugme.osdl.org/show_bug.cgi?id=290. It needs someone who
will take it up with the gcc folks.
As for your patches, I don't think working around an obvious compiler
bug in the kernel source is a good idea, except as an interim
workaround.
--
Muli Ben-Yehuda
http://www.mulix.org
http://syscalltrack.sf.net
On Mon, 10 Feb 2003, James Lamanna wrote:
>
> Looks like ->sig should be ->signal ??
Actually, it should be "sighand". And probably the thing shouldn't muck
around with signal internals at all, but right now the fix is to just
replace all the "->sig" with "->sighand".
Linus
Didn't see this one reported yet:
fs/ncpfs/sock.c: In function `ncp_do_request':
fs/ncpfs/sock.c:760: structure has no member named `sig'
fs/ncpfs/sock.c:762: structure has no member named `sig'
make[2]: *** [fs/ncpfs/sock.o] Error 1
make[1]: *** [fs/ncpfs] Error 2
make: *** [fs] Error 2
.config
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
CONFIG_MPENTIUMII=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_CARD is not set
CONFIG_PNP_DEBUG=y
#
# Protocols
#
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=7777
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=64
CONFIG_AIC7XXX_RESET_DELAY_MS=2000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_INTEL_RNG=y
# CONFIG_AMD_RNG is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP3 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_AMD_8151 is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_SYSV_FS is not set
CONFIG_UDF_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_CIFS=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_AFS_FS is not set
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_AD1816=y
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
On Mon, 10 Feb 2003, [email protected] wrote:
> Didn't see this one reported yet:
>
> fs/ncpfs/sock.c: In function `ncp_do_request':
> fs/ncpfs/sock.c:760: structure has no member named `sig'
> fs/ncpfs/sock.c:762: structure has no member named `sig'
> make[2]: *** [fs/ncpfs/sock.o] Error 1
> make[1]: *** [fs/ncpfs] Error 2
> make: *** [fs] Error 2
I don't know if this is correct. It compiles for me but I don't have any
boxes to test ncpfs with :(
================================================================================
diff -X dontdiff -urN linux-2.5.60.clean/fs/ncpfs/sock.c linux-2.5.60.sighand/fs/ncpfs/sock.c
--- linux-2.5.60.clean/fs/ncpfs/sock.c 2003-02-12 10:53:54.000000000 +0800
+++ linux-2.5.60.sighand/fs/ncpfs/sock.c 2003-02-12 13:03:05.000000000 +0800
@@ -757,9 +757,9 @@
What if we've blocked it ourselves? What about
alarms? Why, in fact, are we mucking with the
sigmask at all? -- r~ */
- if (current->sig->action[SIGINT - 1].sa.sa_handler == SIG_DFL)
+ if (current->sighand->action[SIGINT - 1].sa.sa_handler == SIG_DFL)
mask |= sigmask(SIGINT);
- if (current->sig->action[SIGQUIT - 1].sa.sa_handler == SIG_DFL)
+ if (current->sighand->action[SIGQUIT - 1].sa.sa_handler == SIG_DFL)
mask |= sigmask(SIGQUIT);
}
siginitsetinv(¤t->blocked, mask);
Yours Tony.
/*
* "The significant problems we face cannot be solved at the
* same level of thinking we were at when we created them."
* --Albert Einstein
*/
Hello!
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
> Networking, USB, SCSI, ALSA, ACPI, and various architecture updates (UML,
> Sparc, ia64, ppc64 and ARM).
One of yours hand merged UML updates/fixes in, and another one broke it badly by introducing
sigprocmask(). Now there is a conflict between in-kernel sigprocmask() and
glibc's sigprocmask() (that UML uses to manage signal delivery to right thread).
Can we please change the name of in-kernel's sigprocmask() to avoid name clash? ;)
Jeff Dike is also seem to support idea of renaming the offending function.
Thank you.
Bye,
Oleg
On Mon, Feb 10, 2003 at 01:43:26PM -0800, James Lamanna wrote:
> >>> This broke the compilation with gcc 2.95:
> <-- snip -->
> ...
> gcc -Wp,-MD,fs/jfs/.super.o.d -D__KERNEL__ -Iinclude -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
> -pipe -mpreferred-stack-boundary=2 -march=k6
> -Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
> -D_JFS_4K -DKBUILD_BASENAME=super -DKBUILD_MODNAME=jfs -c -o
> fs/jfs/super.o fs/jfs/super.c
> fs/jfs/super.c: In function `jfs_fill_super':
> fs/jfs/super.c:335: parse error before `)'
> make[2]: *** [fs/jfs/super.o] Error 1
> <-- snip -->
>
> Curious as to what gcc 2.95 version you are using.
> Seems to compile fine with:
> gcc 2.95.4 20011002
I'm using the same gcc. I should have said that I'm compiling with
CONFIG_JFS_DEBUG. Without CONFIG_JFS_DEBUG it indeed compiles fine.
> --James
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, 11 Feb 2003, Oleg Drokin wrote:
>
> One of yours hand merged UML updates/fixes in, and another one broke it badly by introducing
> sigprocmask(). Now there is a conflict between in-kernel sigprocmask() and
> glibc's sigprocmask() (that UML uses to manage signal delivery to right thread).
> Can we please change the name of in-kernel's sigprocmask() to avoid name clash? ;)
No. I'm not goinmg to start caring about user-land naming in-kernel, that
way is a slippery slope. This is firmly a UML problem.
Linus
Interesting BUG() on boot up.
Seems to be new to 2.5.60, 2.5.58 works fine, 2.5.59 got much further
along before dying due to module problems.
The system is /quite/ dead after this, there was never a Code line
printed.
As this is all typed, I did not get the whole Call Trace, let me know if
it is needed.
First the BUG trace, then the .config
Zephaniah E. Hull.
kernel BUG at mm/slab.c:1102!
invalid operand: 000
CPU: 0
EIP: 0060:[<c0148f80>] Not tainted
EFLAGS: 00010002
EIP is at smp_call_function_all_cpus+0x20/0x30
eax: 00000001 ebx: 00000001 ecx: 00000200 edx: 0000003c
esi: 000001f0 edi: d7cfde90 ebp: d7f8fb98 esp: d7f8fb94
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=d7f8e000 task=d7f88040)
Stack: d7cfde90 d7f8fbd0 c014a3b3 c014a300 d7f8fbbc 00000004 d7fefddc d7cc3584
d7f8fbf0 00000002 d7cfde90 d7c7be00 d7cfde90 0000000b 00000000 d7f8fbe8
c014a5c1 d7cfde90 00000078 0000003c 00000000 d7f8fc24 c0148ea5 d7cfde90
Call Trace:
[<c014a3b3>] do_tune_cpucache+0x83/0x240
[<c014a300>] do_ccpupdate_local+0x0/0x30
[<c014a5c1>] enable_cpucache+0x51/0x80
[<c0148ea5>] kmem_cache_create+0x4a5/0x560
[<c0285dd2>] scsi_setup_command_freelist+0xa2/0x130
[<c02887e0>] scsi_register+0x3c0/0x660
[<c02919a1>] get_pci_dev+0x31/0x50
[<c0291df2>] port_detect+0x3c2/0xe50
[<c0145464>] __alloc_pages+0x84/0x2b0
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNP_CARD=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=m
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_XFRM_USER=y
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_UNCLEAN is not set
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_ETHERTAP=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=960
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_LM75 is not set
#
# Mice
#
CONFIG_BUSMOUSE=m
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_RNG is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP3 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_SYSV_FS is not set
CONFIG_UDF_FS=m
# CONFIG_UFS_FS is not set
# CONFIG_XFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_CIFS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_NCP_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_ZISOFS_FS=m
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_PCI_CONSOLE=y
# CONFIG_FBCON_ADVANCED is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
CONFIG_SOUND_TVMIXER=m
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_IOVIRT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_KALLSYMS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
--
1024D/E65A7801 Zephaniah E. Hull <[email protected]>
92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
CCs of replies from mailing lists are requested.
<Upholder> Seen on the back of a T-Shirt: "I am a bomb technician. If you see
me running, try to keep up."
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
> And Roland McGrath has been fixing POSIX thread signal handling, and that
> in turn ended up causing a lot of downstream fixes in affected areas.
And there's still more to come on the signal handling. Currently, my
"hack" to get ARM working is as follows, and is not the best thing to
view on a full stomach.
Generalising the signal handling might have made sense, but this amount
of duplication _just_ to be able to handle non-hardware breakpoints is
getting rather rediculous.
I will be looking into the possibility of carving up the generic
signal handling into a saner structure so we don't have this mess.
Obviously, this patch is not for applying. 8)
--- orig/arch/arm/kernel/signal.c Tue Feb 11 16:09:38 2003
+++ linux/arch/arm/kernel/signal.c Tue Feb 11 16:13:55 2003
@x@ -492,6 +492,78 @x@
force_sig(SIGSEGV, tsk);
}
+int
+specific_send_sig_info(int sig, struct siginfo *info, struct task_struct *t);
+void finish_stop(int stop_count);
+void do_signal_stop(int signr);
+
+/* Some systems do not have a SIGSTKFLT and the kernel never
+ * generates such signals anyways.
+ */
+#ifdef SIGSTKFLT
+#define M_SIGSTKFLT M(SIGSTKFLT)
+#else
+#define M_SIGSTKFLT 0
+#endif
+
+#ifdef SIGEMT
+#define M_SIGEMT M(SIGEMT)
+#else
+#define M_SIGEMT 0
+#endif
+
+#if SIGRTMIN > BITS_PER_LONG
+#define M(sig) (1ULL << ((sig)-1))
+#else
+#define M(sig) (1UL << ((sig)-1))
+#endif
+#define T(sig, mask) (M(sig) & (mask))
+
+#define SIG_KERNEL_BROADCAST_MASK (\
+ M(SIGHUP) | M(SIGINT) | M(SIGQUIT) | M(SIGILL) | \
+ M(SIGTRAP) | M(SIGABRT) | M(SIGBUS) | M(SIGFPE) | \
+ M(SIGKILL) | M(SIGUSR1) | M(SIGSEGV) | M(SIGUSR2) | \
+ M(SIGPIPE) | M(SIGALRM) | M(SIGTERM) | M(SIGXCPU) | \
+ M(SIGXFSZ) | M(SIGVTALRM) | M(SIGPROF) | M(SIGPOLL) | \
+ M(SIGSYS) | M_SIGSTKFLT | M(SIGPWR) | M(SIGCONT) | \
+ M(SIGSTOP) | M(SIGTSTP) | M(SIGTTIN) | M(SIGTTOU) | \
+ M_SIGEMT )
+
+#define SIG_KERNEL_ONLY_MASK (\
+ M(SIGKILL) | M(SIGSTOP) )
+
+#define SIG_KERNEL_STOP_MASK (\
+ M(SIGSTOP) | M(SIGTSTP) | M(SIGTTIN) | M(SIGTTOU) )
+
+#define SIG_KERNEL_COREDUMP_MASK (\
+ M(SIGQUIT) | M(SIGILL) | M(SIGTRAP) | M(SIGABRT) | \
+ M(SIGFPE) | M(SIGSEGV) | M(SIGBUS) | M(SIGSYS) | \
+ M(SIGXCPU) | M(SIGXFSZ) | M_SIGEMT )
+
+#define SIG_KERNEL_IGNORE_MASK (\
+ M(SIGCONT) | M(SIGCHLD) | M(SIGWINCH) | M(SIGURG) )
+
+#define sig_kernel_only(sig) \
+ (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_ONLY_MASK))
+#define sig_kernel_coredump(sig) \
+ (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_COREDUMP_MASK))
+#define sig_kernel_ignore(sig) \
+ (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_IGNORE_MASK))
+#define sig_kernel_stop(sig) \
+ (((sig) < SIGRTMIN) && T(sig, SIG_KERNEL_STOP_MASK))
+
+#define sig_user_defined(t, signr) \
+ (((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) && \
+ ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
+
+#define sig_ignored(t, signr) \
+ (!((t)->ptrace & PT_PTRACED) && \
+ (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_IGN)
+
+#define sig_fatal(t, signr) \
+ (!T(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
+ (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
+
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -522,6 +594,29 @@
struct k_sigaction *ka;
spin_lock_irq(¤t->sighand->siglock);
+ if (unlikely(current->signal->group_stop_count > 0)) {
+ int stop_count;
+ if (current->signal->group_exit_task == current) {
+ /*
+ * Group stop is so we can do a core dump.
+ */
+ current->signal->group_exit_task = NULL;
+ goto dequeue;
+ }
+ /*
+ * There is a group stop in progress. We stop
+ * without any associated signal being in our queue.
+ */
+ stop_count = --current->signal->group_stop_count;
+ signr = current->signal->group_exit_code;
+ current->exit_code = signr;
+ set_current_state(TASK_STOPPED);
+ spin_unlock_irq(¤t->sighand->siglock);
+ finish_stop(stop_count);
+ single_stepping |= ptrace_cancel_bpt(current);
+ continue;
+ }
+ dequeue:
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sighand->siglock);
@@ -529,8 +624,19 @@
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
+ /*
+ * If there is a group stop in progress,
+ * we must participate in the bookkeeping.
+ */
+ if (current->signal->group_stop_count > 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ --current->signal->group_stop_count;
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
/* Let the debugger run. */
current->exit_code = signr;
+ current->last_siginfo = &info;
set_current_state(TASK_STOPPED);
notify_parent(current, SIGCHLD);
schedule();
@@ -542,11 +648,10 @@
continue;
current->exit_code = 0;
- /* The debugger continued. Ignore SIGSTOP. */
- if (signr == SIGSTOP)
- continue;
-
- /* Update the siginfo structure. Is this good? */
+ /* Update the siginfo structure if the signal has
+ changed. If the debugger wanted something
+ specific in the siginfo structure then it should
+ have updated *info via PTRACE_SETSIGINFO. */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
@@ -557,60 +662,68 @@
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
- send_sig_info(signr, &info, current);
+ spin_lock_irq(¤t->sighand->siglock);
+ specific_send_sig_info(signr, &info, current);
+ spin_unlock_irq(¤t->sighand->siglock);
continue;
}
}
- ka = ¤t->sig->action[signr-1];
- if (ka->sa.sa_handler == SIG_IGN) {
- if (signr != SIGCHLD)
- continue;
- /* Check for SIGCHLD: it's special. */
- while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
- /* nothing */;
+ ka = ¤t->sighand->action[signr-1];
+ if (ka->sa.sa_handler == SIG_IGN) /* Do nothing. */
continue;
- }
if (ka->sa.sa_handler == SIG_DFL) {
- int exit_code = signr;
+ /*
+ * Now we are doing the default action for this signal.
+ */
+ if (sig_kernel_ignore(signr)) /* Default is nothing. */
+ continue;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
- switch (signr) {
- case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
- continue;
-
- case SIGTSTP: case SIGTTIN: case SIGTTOU:
- if (is_orphaned_pgrp(current->pgrp))
- continue;
- /* FALLTHRU */
-
- case SIGSTOP: {
- struct signal_struct *sig;
- set_current_state(TASK_STOPPED);
- current->exit_code = signr;
- sig = current->parent->sig;
- if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
- notify_parent(current, SIGCHLD);
- schedule();
- single_stepping |= ptrace_cancel_bpt(current);
+ if (sig_kernel_stop(signr)) {
+ /*
+ * The default action is to stop all threads in
+ * the thread group. The job control signals
+ * do nothing in an orphaned pgrp, but SIGSTOP
+ * always works.
+ */
+ if (signr == SIGSTOP ||
+ !is_orphaned_pgrp(current->pgrp))
+ do_signal_stop(signr);
continue;
}
- case SIGQUIT: case SIGILL: case SIGTRAP:
- case SIGABRT: case SIGFPE: case SIGSEGV:
- case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
- if (do_coredump(signr, exit_code, regs))
- exit_code |= 0x80;
- /* FALLTHRU */
-
- default:
- sig_exit(signr, exit_code, &info);
- /* NOTREACHED */
+ /*
+ * Anything else is fatal, maybe with a core dump.
+ */
+ current->flags |= PF_SIGNALED;
+ if (sig_kernel_coredump(signr) &&
+ do_coredump(signr, signr, regs)) {
+ /*
+ * That killed all other threads in the group and
+ * synchronized with their demise, so there can't
+ * be any more left to kill now. The group_exit
+ * flags are set by do_coredump. Note that
+ * thread_group_empty won't always be true yet,
+ * because those threads were blocked in __exit_mm
+ * and we just let them go to finish dying.
+ */
+ const int code = signr | 0x80;
+ BUG_ON(!current->signal->group_exit);
+ BUG_ON(current->signal->group_exit_code != code);
+ do_exit(code);
+ /* NOTREACHED */
}
+
+ /*
+ * Death signals, no core dump.
+ */
+ do_group_exit(signr);
+ /* NOTREACHED */
}
/* Are we from a system call? */
--
Russell King ([email protected]) The developer of ARM Linux
http://www.arm.linux.org.uk/personal/aboutme.html
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
>...
> Summary of changes from v2.5.59 to v2.5.60
> ============================================
>...
> Rusty Russell <[email protected]>:
>...
> o Memory leak in drivers_net_arlan.c (1)
>...
This change broke the compilation of arlan.c:
<-- snip -->
...
gcc -Wp,-MD,drivers/net/.arlan.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-DKBUILD_BASENAME=arlan -DKBUILD_MODNAME=arlan -c -o drivers/net/arlan.o
drivers/net/arlan.c
drivers/net/arlan.c: In function `arlan_allocate_device':
drivers/net/arlan.c:1202: structure has no member named `config'
drivers/net/arlan.c:1212: structure has no member named `config'
drivers/net/arlan.c: At top level:
drivers/net/arlan.c:26: warning: `probe' defined but not used
drivers/net/arlan.c:1128: warning: `arlan_find_devices' defined but not used
make[2]: *** [drivers/net/arlan.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, 11 Feb 2003, Russell King wrote:
>
> Generalising the signal handling might have made sense, but this amount
> of duplication _just_ to be able to handle non-hardware breakpoints is
> getting rather rediculous.
Oh wow. Yeah, this needs to be fixed some way, by teaching the regular
signal handling about it.
> I will be looking into the possibility of carving up the generic
> signal handling into a saner structure so we don't have this mess.
Good.
Linus
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
>...
> Summary of changes from v2.5.59 to v2.5.60
> ============================================
>...
> James Bottomley <[email protected]>:
>...
> o [SCSI] Migrate sim710 to 53c700 chip driver
>...
This change broke the compilation of sim710.c:
<-- snip -->
...
gcc -Wp,-MD,drivers/scsi/.sim710.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6
-Iinclude/asm-i386/mach-default -nostdinc -iwithprefix include
-DKBUILD_BASENAME=sim710 -DKBUILD_MODNAME=sim710 -c -o
drivers/scsi/sim710.o drivers/scsi/sim710.c
drivers/scsi/sim710.c:329: `sim710_device_remove' undeclared here (not in a function)
drivers/scsi/sim710.c:329: initializer element is not constant
drivers/scsi/sim710.c:329: (near initialization for `sim710_eisa_driver.driver.remove')
drivers/scsi/sim710.c:330: initializer element is not constant
drivers/scsi/sim710.c:330: (near initialization for `sim710_eisa_driver.driver')
make[2]: *** [drivers/scsi/sim710.o] Error 1
<-- snip -->
This is the only occurence of sim710_device_remove in the whole kernel
tree.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, 2003-02-11 at 12:16, Adrian Bunk wrote:
> On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
> >...
> > Summary of changes from v2.5.59 to v2.5.60
> > ============================================
> >...
> > James Bottomley <[email protected]>:
> >...
> > o [SCSI] Migrate sim710 to 53c700 chip driver
> >...
>
> This change broke the compilation of sim710.c:
This is actually already fixed in the current linux-scsi tree.
James
On Monday 10 February 2003 20:08, Linus Torvalds wrote:
> Ok, this contains a lot of patches all over the map, since there were two
> weeks of merging to be done (and the merging took almost a week).
>
> Networking, USB, SCSI, ALSA, ACPI, and various architecture updates (UML,
> Sparc, ia64, ppc64 and ARM).
this broke the compile of aha152x:
gcc -Wp,-MD,drivers/scsi/.aha152x.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe
-mpreferred-stack-boundary=2 -march=i586 -Iinclude/asm-i386/mach-default
-fomit-frame-pointer -nostdinc -iwithprefix include -DMODULE -DAHA152X_STAT
-DAUTOCONF -DKBUILD_BASENAME=aha152x -DKBUILD_MODNAME=aha152x -c -o
drivers/scsi/aha152x.o drivers/scsi/aha152x.c
drivers/scsi/aha152x.c: In function `remove_lun_SC':
drivers/scsi/aha152x.c:774: structure has no member named `target'
drivers/scsi/aha152x.c:774: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `aha152x_porttest':
drivers/scsi/aha152x.c:874: warning: `__check_region' is deprecated (declared
at include/linux/ioport.h:111)
drivers/scsi/aha152x.c: In function `tc1550_porttest':
drivers/scsi/aha152x.c:892: warning: `__check_region' is deprecated (declared
at include/linux/ioport.h:111)
drivers/scsi/aha152x.c: In function `aha152x_internal_queue':
drivers/scsi/aha152x.c:1479: structure has no member named `host'
drivers/scsi/aha152x.c:1499: structure has no member named `host'
drivers/scsi/aha152x.c:1499: structure has no member named `target'
drivers/scsi/aha152x.c:1499: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `aha152x_abort':
drivers/scsi/aha152x.c:1592: structure has no member named `host'
drivers/scsi/aha152x.c:1597: structure has no member named `host'
drivers/scsi/aha152x.c:1597: structure has no member named `target'
drivers/scsi/aha152x.c:1597: structure has no member named `lun'
drivers/scsi/aha152x.c:1635: structure has no member named `host'
drivers/scsi/aha152x.c:1635: structure has no member named `target'
drivers/scsi/aha152x.c:1635: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `timer_expired':
drivers/scsi/aha152x.c:1644: structure has no member named `host'
drivers/scsi/aha152x.c: In function `aha152x_device_reset':
drivers/scsi/aha152x.c:1666: structure has no member named `host'
drivers/scsi/aha152x.c:1679: structure has no member named `host'
drivers/scsi/aha152x.c:1679: structure has no member named `target'
drivers/scsi/aha152x.c:1679: structure has no member named `lun'
drivers/scsi/aha152x.c:1684: structure has no member named `host'
drivers/scsi/aha152x.c:1684: structure has no member named `host'
drivers/scsi/aha152x.c:1685: structure has no member named `target'
drivers/scsi/aha152x.c:1685: structure has no member named `target'
drivers/scsi/aha152x.c:1686: structure has no member named `lun'
drivers/scsi/aha152x.c:1686: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `aha152x_bus_reset':
drivers/scsi/aha152x.c:1741: structure has no member named `host'
drivers/scsi/aha152x.c: In function `aha152x_host_reset':
drivers/scsi/aha152x.c:1825: structure has no member named `host'
drivers/scsi/aha152x.c: In function `done':
drivers/scsi/aha152x.c:1889: structure has no member named `host'
drivers/scsi/aha152x.c:1889: structure has no member named `target'
drivers/scsi/aha152x.c:1889: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `busfree_run':
drivers/scsi/aha152x.c:2055: structure has no member named `host'
drivers/scsi/aha152x.c:2055: structure has no member named `host'
drivers/scsi/aha152x.c:2056: structure has no member named `target'
drivers/scsi/aha152x.c:2056: structure has no member named `target'
drivers/scsi/aha152x.c:2057: structure has no member named `lun'
drivers/scsi/aha152x.c:2057: structure has no member named `lun'
drivers/scsi/aha152x.c:2066: structure has no member named `host'
drivers/scsi/aha152x.c:2066: structure has no member named `target'
drivers/scsi/aha152x.c:2066: structure has no member named `lun'
drivers/scsi/aha152x.c:2116: structure has no member named `target'
drivers/scsi/aha152x.c: In function `seldo_run':
drivers/scsi/aha152x.c:2148: structure has no member named `host'
drivers/scsi/aha152x.c:2148: structure has no member named `target'
drivers/scsi/aha152x.c:2148: structure has no member named `lun'
drivers/scsi/aha152x.c:2155: structure has no member named `lun'
drivers/scsi/aha152x.c:2161: structure has no member named `target'
drivers/scsi/aha152x.c:2169: structure has no member named `target'
drivers/scsi/aha152x.c:2172: structure has no member named `target'
drivers/scsi/aha152x.c: In function `seldi_run':
drivers/scsi/aha152x.c:2227: structure has no member named `host'
drivers/scsi/aha152x.c:2227: structure has no member named `target'
drivers/scsi/aha152x.c:2227: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `msgi_run':
drivers/scsi/aha152x.c:2343: structure has no member named `host'
drivers/scsi/aha152x.c:2343: structure has no member named `target'
drivers/scsi/aha152x.c:2343: structure has no member named `lun'
drivers/scsi/aha152x.c:2356: structure has no member named `target'
drivers/scsi/aha152x.c:2357: structure has no member named `host'
drivers/scsi/aha152x.c:2357: structure has no member named `target'
drivers/scsi/aha152x.c:2357: structure has no member named `lun'
drivers/scsi/aha152x.c:2358: structure has no member named `target'
drivers/scsi/aha152x.c:2360: structure has no member named `host'
drivers/scsi/aha152x.c:2360: structure has no member named `target'
drivers/scsi/aha152x.c:2360: structure has no member named `lun'
drivers/scsi/aha152x.c:2381: structure has no member named `host'
drivers/scsi/aha152x.c:2381: structure has no member named `target'
drivers/scsi/aha152x.c:2381: structure has no member named `lun'
drivers/scsi/aha152x.c:2388: structure has no member named `host'
drivers/scsi/aha152x.c:2388: structure has no member named `target'
drivers/scsi/aha152x.c:2388: structure has no member named `lun'
drivers/scsi/aha152x.c:2398: structure has no member named `host'
drivers/scsi/aha152x.c:2398: structure has no member named `target'
drivers/scsi/aha152x.c:2398: structure has no member named `lun'
drivers/scsi/aha152x.c:2402: structure has no member named `target'
drivers/scsi/aha152x.c:2418: structure has no member named `target'
drivers/scsi/aha152x.c:2421: structure has no member named `host'
drivers/scsi/aha152x.c:2421: structure has no member named `target'
drivers/scsi/aha152x.c:2421: structure has no member named `lun'
drivers/scsi/aha152x.c:2425: structure has no member named `target'
drivers/scsi/aha152x.c:2426: structure has no member named `target'
drivers/scsi/aha152x.c: In function `msgi_end':
drivers/scsi/aha152x.c:2459: structure has no member named `host'
drivers/scsi/aha152x.c:2459: structure has no member named `target'
drivers/scsi/aha152x.c:2459: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `msgo_init':
drivers/scsi/aha152x.c:2474: structure has no member named `target'
drivers/scsi/aha152x.c:2474: structure has no member named `target'
drivers/scsi/aha152x.c:2475: structure has no member named `lun'
drivers/scsi/aha152x.c:2477: structure has no member named `host'
drivers/scsi/aha152x.c:2477: structure has no member named `target'
drivers/scsi/aha152x.c:2477: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `msgo_end':
drivers/scsi/aha152x.c:2533: structure has no member named `host'
drivers/scsi/aha152x.c:2533: structure has no member named `target'
drivers/scsi/aha152x.c:2533: structure has no member named `lun'
drivers/scsi/aha152x.c:2534: structure has no member named `target'
drivers/scsi/aha152x.c:2535: structure has no member named `host'
drivers/scsi/aha152x.c:2535: structure has no member named `target'
drivers/scsi/aha152x.c:2535: structure has no member named `lun'
drivers/scsi/aha152x.c:2536: structure has no member named `target'
drivers/scsi/aha152x.c: In function `cmd_init':
drivers/scsi/aha152x.c:2551: structure has no member named `host'
drivers/scsi/aha152x.c:2551: structure has no member named `target'
drivers/scsi/aha152x.c:2551: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `cmd_end':
drivers/scsi/aha152x.c:2592: structure has no member named `host'
drivers/scsi/aha152x.c:2592: structure has no member named `target'
drivers/scsi/aha152x.c:2592: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `datai_run':
drivers/scsi/aha152x.c:2659: structure has no member named `host'
drivers/scsi/aha152x.c:2659: structure has no member named `target'
drivers/scsi/aha152x.c:2659: structure has no member named `lun'
drivers/scsi/aha152x.c:2672: structure has no member named `host'
drivers/scsi/aha152x.c:2672: structure has no member named `target'
drivers/scsi/aha152x.c:2672: structure has no member named `lun'
drivers/scsi/aha152x.c:2714: structure has no member named `host'
drivers/scsi/aha152x.c:2714: structure has no member named `target'
drivers/scsi/aha152x.c:2714: structure has no member named `lun'
drivers/scsi/aha152x.c:2735: structure has no member named `host'
drivers/scsi/aha152x.c:2735: structure has no member named `target'
drivers/scsi/aha152x.c:2735: structure has no member named `lun'
drivers/scsi/aha152x.c:2742: structure has no member named `host'
drivers/scsi/aha152x.c:2742: structure has no member named `target'
drivers/scsi/aha152x.c:2742: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `datao_run':
drivers/scsi/aha152x.c:2794: structure has no member named `host'
drivers/scsi/aha152x.c:2794: structure has no member named `target'
drivers/scsi/aha152x.c:2794: structure has no member named `lun'
drivers/scsi/aha152x.c:2828: structure has no member named `host'
drivers/scsi/aha152x.c:2828: structure has no member named `target'
drivers/scsi/aha152x.c:2828: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `update_state':
drivers/scsi/aha152x.c:2917: structure has no member named `host'
drivers/scsi/aha152x.c:2917: structure has no member named `target'
drivers/scsi/aha152x.c:2917: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `parerr_run':
drivers/scsi/aha152x.c:2936: structure has no member named `host'
drivers/scsi/aha152x.c:2936: structure has no member named `target'
drivers/scsi/aha152x.c:2936: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `is_complete':
drivers/scsi/aha152x.c:3056: structure has no member named `host'
drivers/scsi/aha152x.c:3056: structure has no member named `target'
drivers/scsi/aha152x.c:3056: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `show_command':
drivers/scsi/aha152x.c:3379: structure has no member named `target'
drivers/scsi/aha152x.c:3379: structure has no member named `lun'
drivers/scsi/aha152x.c: In function `get_command':
drivers/scsi/aha152x.c:3444: structure has no member named `target'
drivers/scsi/aha152x.c:3444: structure has no member named `lun'
make[1]: *** [drivers/scsi/aha152x.o] Error 1
make: *** [drivers/scsi/aha152x.o] Error 2
"Zephaniah E\. Hull" <[email protected]> wrote:
>
> Interesting BUG() on boot up.
>
The EATA driver's locking in there is so wrong I don't know how to begin to
describe it ;) Looks like a misguided cli() conversion.
Does this get you up and running?
scsi/eata.c | 4 ----
1 files changed, 4 deletions(-)
diff -puN drivers/scsi/eata.c~eata-detect-fix drivers/scsi/eata.c
--- 25/drivers/scsi/eata.c~eata-detect-fix 2003-02-11 14:46:21.000000000 -0800
+++ 25-akpm/drivers/scsi/eata.c 2003-02-11 14:46:37.000000000 -0800
@@ -1450,9 +1450,6 @@ static void add_pci_ports(void) {
static int eata2x_detect(Scsi_Host_Template *tpnt) {
unsigned int j = 0, k;
- unsigned long spin_flags;
-
- spin_lock_irqsave(&driver_lock, spin_flags);
tpnt->proc_name = "eata2x";
@@ -1490,7 +1487,6 @@ static int eata2x_detect(Scsi_Host_Templ
}
num_boards = j;
- spin_unlock_irqrestore(&driver_lock, spin_flags);
return j;
}
_
Andrew Morton <[email protected]> wrote:
>
> "Zephaniah E\. Hull" <[email protected]> wrote:
> >
> > Interesting BUG() on boot up.
> >
>
> The EATA driver's locking in there is so wrong I don't know how to begin to
> describe it ;) Looks like a misguided cli() conversion.
>
> Does this get you up and running?
>
This one is better.
drivers/scsi/eata.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
diff -puN drivers/scsi/eata.c~eata-detect-fix drivers/scsi/eata.c
--- 25/drivers/scsi/eata.c~eata-detect-fix Tue Feb 11 14:50:03 2003
+++ 25-akpm/drivers/scsi/eata.c Tue Feb 11 14:51:57 2003
@@ -1193,9 +1193,9 @@ static int port_detect \
}
#endif
- spin_unlock(&driver_lock);
+ spin_unlock_irq(&driver_lock);
sh[j] = scsi_register(tpnt, sizeof(struct hostdata));
- spin_lock(&driver_lock);
+ spin_lock_irq(&driver_lock);
if (sh[j] == NULL) {
printk("%s: unable to register host, detaching.\n", name);
@@ -1450,9 +1450,8 @@ static void add_pci_ports(void) {
static int eata2x_detect(Scsi_Host_Template *tpnt) {
unsigned int j = 0, k;
- unsigned long spin_flags;
- spin_lock_irqsave(&driver_lock, spin_flags);
+ spin_lock_irq(&driver_lock);
tpnt->proc_name = "eata2x";
@@ -1490,7 +1489,7 @@ static int eata2x_detect(Scsi_Host_Templ
}
num_boards = j;
- spin_unlock_irqrestore(&driver_lock, spin_flags);
+ spin_unlock_irq(&driver_lock);
return j;
}
_
Adrian Bunk <[email protected]> wrote:
>
> On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
> >...
> > Summary of changes from v2.5.59 to v2.5.60
> > ============================================
> >...
> > Rusty Russell <[email protected]>:
> >...
> > o Memory leak in drivers_net_arlan.c (1)
> >...
>
> This change broke the compilation of arlan.c:
>
drivers/net/arlan.c | 40 ++++++++++++++++++++--------------------
1 files changed, 20 insertions(+), 20 deletions(-)
diff -puN drivers/net/arlan.c~arlan-fix drivers/net/arlan.c
--- 25/drivers/net/arlan.c~arlan-fix Tue Feb 11 15:03:45 2003
+++ 25-akpm/drivers/net/arlan.c Tue Feb 11 15:07:08 2003
@@ -1124,24 +1124,6 @@ static int __init arlan_probe_everywhere
return -ENODEV;
}
-static int __init arlan_find_devices(void)
-{
- int m;
- int found = 0;
-
- ARLAN_DEBUG_ENTRY("arlan_find_devices");
- if (mem != 0 && numDevices == 1) /* Check a single specified location. */
- return 1;
- for (m =(int) phys_to_virt(0xc0000); m <=(int) phys_to_virt(0xDE000); m += 0x2000)
- {
- if (arlan_check_fingerprint(m) == 0)
- found++;
- }
- ARLAN_DEBUG_EXIT("arlan_find_devices");
-
- return found;
-}
-
static int arlan_change_mtu(struct net_device *dev, int new_mtu)
{
@@ -1199,7 +1181,7 @@ static int __init
return 0;
}
ap = dev->priv;
- ap->config = dev->priv + sizeof(struct arlan_private);
+ ap->conf = dev->priv + sizeof(struct arlan_private);
ap->init_etherdev_alloc = 1;
} else {
dev = devs;
@@ -1209,7 +1191,7 @@ static int __init
return 0;
}
ap = dev->priv;
- ap->config = dev->priv + sizeof(struct arlan_private);
+ ap->conf = dev->priv + sizeof(struct arlan_private);
memset(ap, 0, sizeof(*ap));
}
@@ -2007,6 +1989,24 @@ int __init arlan_probe(struct net_device
#ifdef MODULE
+static int __init arlan_find_devices(void)
+{
+ int m;
+ int found = 0;
+
+ ARLAN_DEBUG_ENTRY("arlan_find_devices");
+ if (mem != 0 && numDevices == 1) /* Check a single specified location. */
+ return 1;
+ for (m =(int) phys_to_virt(0xc0000); m <=(int) phys_to_virt(0xDE000); m += 0x2000)
+ {
+ if (arlan_check_fingerprint(m) == 0)
+ found++;
+ }
+ ARLAN_DEBUG_EXIT("arlan_find_devices");
+
+ return found;
+}
+
int init_module(void)
{
int i = 0;
_
On Tue, 2003-02-11 at 09:06, Linus Torvalds wrote:
> > I will be looking into the possibility of carving up the generic
> > signal handling into a saner structure so we don't have this mess.
>
> Good.
I already did some of this and I'll push to Linux right now.
It's enough for Sparc64, doing a few extensions to the hook
mechanism I created shouldn't be hard for what the m68k
and ARM folks are doing.
Linus Torvalds <[email protected]> writes:
> On Tue, 11 Feb 2003, Oleg Drokin wrote:
> >
> > One of yours hand merged UML updates/fixes in, and another one broke it badly
> by introducing
>
> > sigprocmask(). Now there is a conflict between in-kernel sigprocmask() and
> > glibc's sigprocmask() (that UML uses to manage signal delivery to right
> thread).
>
> > Can we please change the name of in-kernel's sigprocmask() to avoid name
> clash? ;)
>
>
> No. I'm not goinmg to start caring about user-land naming in-kernel, that
> way is a slippery slope. This is firmly a UML problem.
Just for throwing out suggestions, UML can easily avoid using
glibc altogether as it is already intimate with the system call layer.
Or it can use the linker to play games with symbol names to move the kernel off
into it's own separate name space.
This sounds like a good opportunity to figure out which makes most sense
and future proof UML.
Eric
Hi Luben,
hi LKML,
On Mon, Feb 10, 2003 at 11:08:28AM -0800, Linus Torvalds wrote:
> Luben Tuikov <[email protected]>:
> o [SCSI] Move cmd->{lun, target, channel} to cmd->device->{lun, id,
> channel}
> o [SCSI] Move cmd->host to cmd->device->host
> o cmd_alloc54-3.patch [3/3]
> o [SCSI] add commands at the tail of cmd_list
it would be nice, if you would propagate those simple changes
into the drivers.
imm.c breaks now.
Fix is attached.
Regards
Ingo Oeser
--- linux-2.5.60-editted/drivers/scsi/imm.c Wed Feb 12 12:00:41 2003
+++ linux-2.5.60/drivers/scsi/imm.c Tue Feb 11 20:00:59 2003
@@ -733,7 +733,7 @@
static inline int imm_send_command(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
int k;
/* NOTE: IMM uses byte pairs */
@@ -758,7 +758,7 @@
* 0 Told to schedule
* 1 Finished data transfer
*/
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
unsigned short ppb = IMM_BASE(host_no);
unsigned long start_jiffies = jiffies;
@@ -845,7 +845,7 @@
int imm_command(Scsi_Cmnd * cmd)
{
static int first_pass = 1;
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (first_pass) {
printk("imm: using non-queuing interface\n");
@@ -867,7 +867,7 @@
schedule();
if (cmd->SCp.phase) /* Only disconnect if we have connected */
- imm_disconnect(cmd->host->unique_id);
+ imm_disconnect(cmd->device->host->unique_id);
imm_pb_release(host_no);
imm_hosts[host_no].cur_cmd = 0;
@@ -883,7 +883,7 @@
{
imm_struct *tmp = (imm_struct *) data;
Scsi_Cmnd *cmd = tmp->cur_cmd;
- struct Scsi_Host *host = cmd->host;
+ struct Scsi_Host *host = cmd->device->host;
unsigned long flags;
if (!cmd) {
@@ -930,9 +930,9 @@
#endif
if (cmd->SCp.phase > 1)
- imm_disconnect(cmd->host->unique_id);
+ imm_disconnect(cmd->device->host->unique_id);
if (cmd->SCp.phase > 0)
- imm_pb_release(cmd->host->unique_id);
+ imm_pb_release(cmd->device->host->unique_id);
spin_lock_irqsave(host->host_lock, flags);
tmp->cur_cmd = 0;
@@ -943,7 +943,7 @@
static int imm_engine(imm_struct * tmp, Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
unsigned short ppb = IMM_BASE(host_no);
unsigned char l = 0, h = 0;
int retv, x;
@@ -972,7 +972,7 @@
/* Phase 2 - We are now talking to the scsi bus */
case 2:
- if (!imm_select(host_no, cmd->target)) {
+ if (!imm_select(host_no, cmd->device->id)) {
imm_fail(host_no, DID_NO_CONNECT);
return 0;
}
@@ -1082,7 +1082,7 @@
int imm_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (imm_hosts[host_no].cur_cmd) {
printk("IMM: bug in imm_queuecommand\n");
@@ -1125,7 +1125,7 @@
int imm_abort(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
/*
* There is no method for aborting commands since Iomega
* have tied the SCSI_MESSAGE line high in the interface
@@ -1157,7 +1157,7 @@
int imm_reset(Scsi_Cmnd * cmd)
{
- int host_no = cmd->host->unique_id;
+ int host_no = cmd->device->host->unique_id;
if (cmd->SCp.phase)
imm_disconnect(host_no);
--
Science is what we can tell a computer. Art is everything else. --- D.E.Knuth
[email protected] said:
> Just for throwing out suggestions, UML can easily avoid using glibc
> altogether as it is already intimate with the system call layer.
Easily? As in write my own system call wrappers? And how is UML intimate
with the system calls, anyway? It is no more intimate with the host's
system calls than any other app.
It also uses some smaller higher-level pieces of libc (printf early in boot,
readdir et al in hostfs, etc).
> Or it can use the linker to play games with symbol names to move the
> kernel off into it's own separate name space.
Maybe, I'm not expert enough with the linker to do that.
> This sounds like a good opportunity to figure out which makes most
> sense and future proof UML.
My current thinking is that I will bundle all the userspace code into a
single object which then gets linked (-r IIRC) against libc. That should
resolve all libc references, at which point I can link it into the kernel,
and I think there won't be any conflicts.
Jeff
I'm not sure what's causing the problem, but Andrew Morton send me this
patch which gets rid of the problem for him. The fmt string that
jfs_err() is invoked with is sufficient to identify the location, so
__FILE__ and __LINE__ are not really needed anyway.
Linus, please apply.
Thanks,
Shaggy
diff -puN fs/jfs/jfs_debug.h~jfs-build-fix fs/jfs/jfs_debug.h
--- 25/fs/jfs/jfs_debug.h~jfs-build-fix 2003-02-12 02:20:40.000000000
-0800
+++ 25-akpm/fs/jfs/jfs_debug.h 2003-02-12 02:20:46.000000000 -0800
@@ -89,8 +89,7 @@ extern void dump_mem(char *label, void *
/* error event message: e.g., i/o error */
#define jfs_err(fmt, arg...) do { \
if (jfsloglevel >= JFS_LOGLEVEL_ERR) \
- printk(KERN_ERR "%s:%d " fmt "\n", \
- __FILE__, __LINE__, ## arg); \
+ printk(KERN_ERR fmt "\n", ## arg); \
} while (0)
/*
--
David Kleikamp
IBM Linux Technology Center
On Wed, Feb 12, 2003 at 08:52:36AM -0600, Dave Kleikamp wrote:
> I'm not sure what's causing the problem, but Andrew Morton send me this
> patch which gets rid of the problem for him. The fmt string that
> jfs_err() is invoked with is sufficient to identify the location, so
> __FILE__ and __LINE__ are not really needed anyway.
>
> Linus, please apply.
>
> Thanks,
> Shaggy
>
> diff -puN fs/jfs/jfs_debug.h~jfs-build-fix fs/jfs/jfs_debug.h
> --- 25/fs/jfs/jfs_debug.h~jfs-build-fix 2003-02-12 02:20:40.000000000
> -0800
> +++ 25-akpm/fs/jfs/jfs_debug.h 2003-02-12 02:20:46.000000000 -0800
> @@ -89,8 +89,7 @@ extern void dump_mem(char *label, void *
> /* error event message: e.g., i/o error */
> #define jfs_err(fmt, arg...) do { \
> if (jfsloglevel >= JFS_LOGLEVEL_ERR) \
> - printk(KERN_ERR "%s:%d " fmt "\n", \
> - __FILE__, __LINE__, ## arg); \
> + printk(KERN_ERR fmt "\n", ## arg); \
> } while (0)
>
> /*
Ah, then it's a well-known 2.95 parser bug (sorry for not looking better
at it when sending my initial report). The following alternative patch
is sufficient to fix the compilation with 2.95 (it's your choice which
of the two patches you prefer):
--- linux-2.5.60-full/fs/jfs/jfs_debug.h.old 2003-02-12 15:59:14.000000000 +0100
+++ linux-2.5.60-full/fs/jfs/jfs_debug.h 2003-02-12 15:59:35.000000000 +0100
@@ -90,7 +90,7 @@
#define jfs_err(fmt, arg...) do { \
if (jfsloglevel >= JFS_LOGLEVEL_ERR) \
printk(KERN_ERR "%s:%d " fmt "\n", \
- __FILE__, __LINE__, ## arg); \
+ __FILE__ , __LINE__ , ## arg); \
} while (0)
/*
> David Kleikamp
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Wednesday 12 February 2003 09:04, Adrian Bunk wrote:
> Ah, then it's a well-known 2.95 parser bug (sorry for not looking
> better at it when sending my initial report). The following
> alternative patch is sufficient to fix the compilation with 2.95
> (it's your choice which of the two patches you prefer):
>
> --- linux-2.5.60-full/fs/jfs/jfs_debug.h.old 2003-02-12
> 15:59:14.000000000 +0100 +++
> linux-2.5.60-full/fs/jfs/jfs_debug.h 2003-02-12 15:59:35.000000000
> +0100 @@ -90,7 +90,7 @@
> #define jfs_err(fmt, arg...) do { \
> if (jfsloglevel >= JFS_LOGLEVEL_ERR) \
> printk(KERN_ERR "%s:%d " fmt "\n", \
> - __FILE__, __LINE__, ## arg); \
> + __FILE__ , __LINE__ , ## arg); \
> } while (0)
>
> /*
Interesting that the assert() macro in the same file is very similar,
but apparently doesn't have the same problem. Do you know if it's tied
to the ## operator? I'm not emotionally attached to __FILE__ and
__LINE__, so I'll just go with removing them, unless anyone wants to
change my mind.
Thanks,
Shaggy
--
David Kleikamp
IBM Linux Technology Center
Dave Kleikamp <[email protected]> writes:
|> Interesting that the assert() macro in the same file is very similar,
|> but apparently doesn't have the same problem. Do you know if it's tied
|> to the ## operator?
Yes, there is a difference in the handling of ## wrt. varargs macros in
the case of no arguments. Previously the compiler removed everything
before ## upto the next whitespace, whereas it now removes exactly the
last token.
Andreas.
--
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux AG, Deutschherrnstr. 15-19, D-90429 N?rnberg
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
[email protected] said:
> Or it can use the linker to play games with symbol names to move the
> kernel off into it's own separate name space.
>
> This sounds like a good opportunity to figure out which makes most
> sense and future proof UML.
OK, I thought I had a cunning plan to deal with this problem, but it falls
apart when you actually think about it some.
The problem is this -
2.5.60 introduces sigprocmask as a kernel function
UML calls sigprocmask from its userspace code (the stuff that interacts
with libc rather than the kernel) and it expects to get the libc sigprocmask
which makes a system call into the host kernel
Instead, it gets the new kernel sigprocmask, and things go downhill
rapidly from there
My cunning plan was this -
link UML's userspace code into a single .o (call it userspace.o),
similarly link its kernel code into a single .o (kernel.o)
do an incremental link of userspace.o against libc, thereby resolving
sigprocmask to the libc version
link all of UML together, kernel code and userspace code. Any remaining
references to sigprocmask will be in kernel code, and will resolve to the new
kernel sigprocmask.
This falls apart for a couple of reasons -
I get a duplicate definition of sscanf which I can't get rid of (libc
vs. lib/vsprintf.c)
More seriously, this assumes a static link and breaks the dynamic build
of UML
In order for this to work, references from userspace.o which can be resolved
in libc must somehow survive the link against the kernel code unresolved.
That is, references to things not in libc must be resolved from kernel code
and references to things in libc must be resolved from libc even if there is
a symbol with the same name in the kernel. I don't see any way of doing this.
The only other solution I see is to rename the kernel sigprocmask. Oleg Drokin
has done with this with a
-Dsigprocmask=__sigprocmask
on kernel code compiles, and I've done it at link time with objcopy. This
sucks, but it does have the great advantage that it actually works.
Anyway, if there's something better, I really want to know about it.
Jeff
Hello!
On Wed, Feb 12, 2003 at 11:12:38PM -0500, Jeff Dike wrote:
> The only other solution I see is to rename the kernel sigprocmask. Oleg Drokin
> has done with this with a
> -Dsigprocmask=__sigprocmask
> on kernel code compiles, and I've done it at link time with objcopy. This
This is a bit incorrect.
I do -Dsigprocmask=__sigprocmask on user code part of UML. I found that glibc
(at least the one I have) defines sigprocmask as weak symbol, but there is
__sigprocmask already that has same address as sigprocmask.
Also this does not work for dynamic build for some reason.
> Anyway, if there's something better, I really want to know about it.
Yeah, someone please come up with the better way. Please!
Bye,
Oleg
Jeff Dike wrote:
>> Or it can use the linker to play games with symbol names to move the
>> kernel off into it's own separate name space.
>
> Maybe, I'm not expert enough with the linker to do that.
The basic trick is that -Wl,--wrap,foo renames the symbol "foo"
to "__real_foo", and resolves any reference to "foo" to "__wrap_foo".
So you can write wrappers that look like this:
whatever __wrap_foo(...)
{
/* do stuff */
blah = __real_foo(...);
/* do more stuff */
}
While this sounds pretty cool, it comes with a few gotchas:
- doesn't work for symbols that get resolved at compile time
(static, maybe also anything in the same compilation unit)
- when doing incremental linking, you need the -Wl,--wrap there,
too
- changing the set of -Wl,--wrap options means that you have to
rebuild from a make clean afterwards (okay, not such a nightmare
anymore, thanks to ccache)
I've used this pretty extensively in umlsim. It's okay if you
really want to avoid touching the source underneath. But you
spend a lot of time tracking down the occasional symbol that is
affected by one of the gotchas above ...
- Werner
--
_________________________________________________________________________
/ Werner Almesberger, Buenos Aires, Argentina [email protected] /
/_http://www.almesberger.net/____________________________________________/
On Tue, Feb 11, 2003 at 02:54:15PM -0800, Andrew Morton wrote:
> Andrew Morton <[email protected]> wrote:
> >
> > "Zephaniah E\. Hull" <[email protected]> wrote:
> > >
> > > Interesting BUG() on boot up.
> > >
> >
> > The EATA driver's locking in there is so wrong I don't know how to begin to
> > describe it ;) Looks like a misguided cli() conversion.
> >
> > Does this get you up and running?
> >
>
> This one is better.
Sorry it took so long, but this patch seems to work perfectly.
Do you need anything from me to get it into Linus' tree?
Zephaniah E. Hull.
--
1024D/E65A7801 Zephaniah E. Hull <[email protected]>
92ED 94E4 B1E6 3624 226D 5727 4453 008B E65A 7801
CCs of replies from mailing lists are requested.
>> Bloody hell. If I were as stupid as everyone else, I'd kill myself this
>> _morning_.
>No you wouldn't. You'd be too stupid to know how.
And that's why sysadmins perform a necessary public service, helping
lusers who can't find Darwin with both hands and a roadmap.
-- Alan J Rosenthal, Graham Reed, and Anthony de Boer in the SDM.