Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with
tons of changes, and in fact since 2.6.18 took longer than normal due to
me traveling (and others probably also being on vacations), it's possibly
even larger than usual.
I think we got updates to pretty much all of the active architectures,
we've got VM changes (dirty shared page tracking, for example), we've got
networking, drivers, you name it. Even the shortlog and the diffstats are
too big to make the kernel mailing list, but even just the summary says
something:
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)
so please give it a good testing, and let's see if there are any
regressions.
As usual, the best way to get some grip on a particular subsystem would
tend to be with some script like
git log --no-merges v2.6.18.. drivers/usb | git shortlog | less -S
which gives a more manageable overview of any particular area you're
interested in (in the example that would be 'drivers/usb', but you can
use this to browse any interesting area).
Linus
Contrary to popular belief, there are people who test -rc kernels
and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one
of the bugs, maintainer of an affectected subsystem or driver, a patch
of you was declared guilty for a breakage or I'm considering you in any
other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Subject : CONFIG_M386=y rwsem compile error
References : http://lkml.org/lkml/2006/10/3/240
Submitter : Klaus Knopper <[email protected]>
Guilty : Andi Kleen <[email protected]>
commit add659bf8aa92f8b3f01a8c0220557c959507fb1
Status : unknown
Subject : Lost all PCI devices
References : http://lkml.org/lkml/2006/9/30/128
Submitter : Luca Tettamanti <[email protected]>
Guilty : Andi Kleen <[email protected]>
commit 5e544d618f0fb21011f36f28d5e3952b9dc109d2
Handled-By : Andi Kleen <[email protected]>
Status : patch available (might not completely fix the problem?)
Subject : SMP x86_64 boot problem
References : http://lkml.org/lkml/2006/9/28/330
Submitter : [email protected]
Status : unknown
Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
Submitter : Thierry Vignaud <[email protected]>
Status : unknown
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Handled-By : Jens Axboe <[email protected]>
Status : Jens is working on a fix
On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> Contrary to popular belief, there are people who test -rc kernels
> and report bugs.
>
> And there are even people who test -git kernels.
>
> This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
>
> If you find your name in the Cc header, you are either submitter of one
> of the bugs, maintainer of an affectected subsystem or driver, a patch
> of you was declared guilty for a breakage or I'm considering you in any
> other way possibly involved with one or more of these issues.
>
> Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
yet.
> Subject : CONFIG_M386=y rwsem compile error
> References : http://lkml.org/lkml/2006/10/3/240
> Submitter : Klaus Knopper <[email protected]>
> Guilty : Andi Kleen <[email protected]>
> commit add659bf8aa92f8b3f01a8c0220557c959507fb1
> Status : unknown
>
>
> Subject : Lost all PCI devices
> References : http://lkml.org/lkml/2006/9/30/128
> Submitter : Luca Tettamanti <[email protected]>
> Guilty : Andi Kleen <[email protected]>
> commit 5e544d618f0fb21011f36f28d5e3952b9dc109d2
> Handled-By : Andi Kleen <[email protected]>
> Status : patch available (might not completely fix the problem?)
>
>
> Subject : SMP x86_64 boot problem
> References : http://lkml.org/lkml/2006/9/28/330
> Submitter : [email protected]
> Status : unknown
>
>
> Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
> References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
> Submitter : Thierry Vignaud <[email protected]>
> Status : unknown
>
>
> Subject : T60 stops triggering any ACPI events
> References : http://lkml.org/lkml/2006/10/4/425
> Submitter : "Michael S. Tsirkin" <[email protected]>
> Status : unknown
>
>
> Subject : DVD drive lost DVD capabilities
> References : http://lkml.org/lkml/2006/10/1/45
> Submitter : Olaf Hering <[email protected]>
> Guilty : Jens Axboe <[email protected]>
> commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
> Handled-By : Jens Axboe <[email protected]>
> Status : Jens is working on a fix
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
On Thu, Oct 05 2006, Benjamin Herrenschmidt wrote:
> On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> > Contrary to popular belief, there are people who test -rc kernels
> > and report bugs.
> >
> > And there are even people who test -git kernels.
> >
> > This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
> >
> > If you find your name in the Cc header, you are either submitter of one
> > of the bugs, maintainer of an affectected subsystem or driver, a patch
> > of you was declared guilty for a breakage or I'm considering you in any
> > other way possibly involved with one or more of these issues.
> >
> > Due to the huge amount of recipients, please trim the Cc when answering.
>
> Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
> yet.
Let me know if it appears to be ide related, there's a chance it could
be the same thing as:
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Handled-By : Jens Axboe <[email protected]>
Status : Jens is working on a fix
--
Jens Axboe
On Thu, 2006-10-05 at 08:37 +0200, Jens Axboe wrote:
> On Thu, Oct 05 2006, Benjamin Herrenschmidt wrote:
> > On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> > > Contrary to popular belief, there are people who test -rc kernels
> > > and report bugs.
> > >
> > > And there are even people who test -git kernels.
> > >
> > > This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
> > >
> > > If you find your name in the Cc header, you are either submitter of one
> > > of the bugs, maintainer of an affectected subsystem or driver, a patch
> > > of you was declared guilty for a breakage or I'm considering you in any
> > > other way possibly involved with one or more of these issues.
> > >
> > > Due to the huge amount of recipients, please trim the Cc when answering.
> >
> > Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
> > yet.
>
> Let me know if it appears to be ide related, there's a chance it could
> be the same thing as:
No idea yet, I had various reports mostly saying "black screen", both on
sleep and resume, there could be several issues. I need to finish some
other stuff and I'll look into it.
Ben.
Hi.
On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> Contrary to popular belief, there are people who test -rc kernels
> and report bugs.
>
> And there are even people who test -git kernels.
Slightly off topic, but let me report a "metoo" as far as testing -git
goes (you can even find a suspend2-against-current-git tree on
kernel.org now!), and some positive progress: for the first time in
months, I'm reliably suspending and resuming my amd64 based laptop. I
don't have an exact cause, but would guess at Andi's multitude of
patches and/or any cpufreq fixes that might have slid in there too. It's
been really strange writing software that others can use reliably, and
not being able to reliably use it yourself! Kudos to all the authors of
suspend/resume bug fixes that have gone in!
Nigel
* Adrian Bunk <[email protected]> wrote:
> This email lists some known regressions in 2.6.19-rc1 compared to
> 2.6.18.
thanks Adrian - this list is extremely useful in my opinion! Please keep
up the good work.
> Subject : CONFIG_M386=y rwsem compile error
> References : http://lkml.org/lkml/2006/10/3/240
> Submitter : Klaus Knopper <[email protected]>
> Guilty : Andi Kleen <[email protected]>
> commit add659bf8aa92f8b3f01a8c0220557c959507fb1
> Status : unknown
find the fix below.
-------------------->
Subject: [patch] x86, fix rwsem build bug on CONFIG_M386=y
From: Ingo Molnar <[email protected]>
CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the
semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.
Reported-by: Klaus Knopper <[email protected]>
Triaged-by: Adrian Bunk <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
---
arch/i386/lib/semaphore.S | 3 +++
1 file changed, 3 insertions(+)
Index: linux/arch/i386/lib/semaphore.S
===================================================================
--- linux.orig/arch/i386/lib/semaphore.S
+++ linux/arch/i386/lib/semaphore.S
@@ -152,6 +152,8 @@ ENTRY(__read_lock_failed)
#endif
+#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM
+
/* Fix up special calling conventions */
ENTRY(call_rwsem_down_read_failed)
CFI_STARTPROC
@@ -214,3 +216,4 @@ ENTRY(call_rwsem_downgrade_wake)
CFI_ENDPROC
END(call_rwsem_downgrade_wake)
+#endif
>
> -------------------->
> Subject: [patch] x86, fix rwsem build bug on CONFIG_M386=y
> From: Ingo Molnar <[email protected]>
added thanks
-Andi
On Thursday 05 October 2006 02:37, Jens Axboe wrote:
>On Thu, Oct 05 2006, Benjamin Herrenschmidt wrote:
>> On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
>> > Contrary to popular belief, there are people who test -rc kernels
>> > and report bugs.
>> >
>> > And there are even people who test -git kernels.
>> >
>> > This email lists some known regressions in 2.6.19-rc1 compared to
>> > 2.6.18.
>> >
>> > If you find your name in the Cc header, you are either submitter of
>> > one of the bugs, maintainer of an affectected subsystem or driver, a
>> > patch of you was declared guilty for a breakage or I'm considering
>> > you in any other way possibly involved with one or more of these
>> > issues.
>> >
>> > Due to the huge amount of recipients, please trim the Cc when
>> > answering.
No idea who to trim, sorry.
It is possible to setup in kconfig, an initramfs system that won't boot,
giving the message as it locks up tight that there is not any initramfs
cpio magic. I have it rebuilding now with the proper options turned on I
hope.
>> Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
>> yet.
>
>Let me know if it appears to be ide related, there's a chance it could
>be the same thing as:
>
>Subject : DVD drive lost DVD capabilities
>References : http://lkml.org/lkml/2006/10/1/45
>Submitter : Olaf Hering <[email protected]>
>Guilty : Jens Axboe <[email protected]>
> commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
>Handled-By : Jens Axboe <[email protected]>
>Status : Jens is working on a fix
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
On Thu, Oct 05, 2006 at 02:45:03PM +1000, Benjamin Herrenschmidt wrote:
> On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> > Contrary to popular belief, there are people who test -rc kernels
> > and report bugs.
> >
> > And there are even people who test -git kernels.
> >
> > This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
> >
> > If you find your name in the Cc header, you are either submitter of one
> > of the bugs, maintainer of an affectected subsystem or driver, a patch
> > of you was declared guilty for a breakage or I'm considering you in any
> > other way possibly involved with one or more of these issues.
> >
> > Due to the huge amount of recipients, please trim the Cc when answering.
>
> Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
> yet.
>...
Thanks, added.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thursday 05 October 2006 04:29, Linus Torvalds wrote:
> Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
>
> As usual for -rc1 with a lot of pending merges, it's a huge thing with
> tons of changes, and in fact since 2.6.18 took longer than normal due to
> me traveling (and others probably also being on vacations), it's possibly
> even larger than usual.
>
> I think we got updates to pretty much all of the active architectures,
> we've got VM changes (dirty shared page tracking, for example), we've got
> networking, drivers, you name it. Even the shortlog and the diffstats are
> too big to make the kernel mailing list, but even just the summary says
> something:
Booted fine here, but I've got a few strange messages from the firewire
subsystem that weren't present in 2.6.18. I think it marginally slows down
boot up, but I could just be imagining it.
[alistair] 16:04 [~] dmesg | grep 1394
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host0: Running dma failed because Node ID is not valid
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
--
Cheers,
Alistair.
Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
On Wednesday 04 October 2006 23:29, Linus Torvalds wrote:
>Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1
> release.
>
>As usual for -rc1 with a lot of pending merges, it's a huge thing with
>tons of changes, and in fact since 2.6.18 took longer than normal due to
>me traveling (and others probably also being on vacations), it's possibly
>even larger than usual.
>
>I think we got updates to pretty much all of the active architectures,
>we've got VM changes (dirty shared page tracking, for example), we've got
>networking, drivers, you name it. Even the shortlog and the diffstats are
>too big to make the kernel mailing list, but even just the summary says
>something:
>
> 4998 total commits
> 6535 files changed, 414890 insertions(+), 233881 deletions(-)
>
>so please give it a good testing, and let's see if there are any
>regressions.
>
>As usual, the best way to get some grip on a particular subsystem would
>tend to be with some script like
>
> git log --no-merges v2.6.18.. drivers/usb | git shortlog | less -S
>
>which gives a more manageable overview of any particular area you're
>interested in (in the example that would be 'drivers/usb', but you can
>use this to browse any interesting area).
>
> Linus
I had to rebuild it 2 extra times to get all the options right, partially
my fault. But once my usual .config was achieved, it back to business as
usual, complete with my logs being littered with this message:
Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
This is my only (so far) minor nit to pick.
[root@coyote linux-2.6.19-rc1]# lsusb
[...]
Bus 003 Device 003: ID 045e:008c Microsoft Corp.
[...]
Now, I'd assume its referring to my mouse, the Microsoft Corp entry above,
which has had a fresh set of batteries installed without effecting this,
and I even removed the batteries from another usb/bluetooth mouse I use on
my lappy when its powered up, all without effecting this apparently
innocuous error as the mouse itself works just fine. The receiver is
about 3 feet away as the tower is at least 5 feet away, under an adjacent
desk.
This started at about the same time I jumped from a 2.6.16-something to the
2nd rc of 2.6.18, and has continued more or less un-abated since. Doing a
reset/reconfigure on the mouse and base station does not appear to
generate any log messages, nor to effect the random logging of the above
messages.
Does anyone have a suggestion?
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
AR arch/x86_64/lib/lib.a
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD vmlinux
arch/x86_64/kernel/built-in.o: In function `print_trace_warning_symbol':
traps.c:(.text.print_trace_warning_symbol+0xa): undefined reference to
`print_symbol'
make: *** [vmlinux] Error 1
Mvh
Mats Johannesson
On Thu, 5 Oct 2006 18:49:16 +0200 Voluspa wrote:
> AR arch/x86_64/lib/lib.a
> GEN .version
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> LD init/built-in.o
> LD vmlinux
> arch/x86_64/kernel/built-in.o: In function `print_trace_warning_symbol':
> traps.c:(.text.print_trace_warning_symbol+0xa): undefined reference to
> `print_symbol'
> make: *** [vmlinux] Error 1
You don't have CONFIG_KALLSYMS enabled?
Does this patch fix the build for you?
---
From: Randy Dunlap <[email protected]>
Include linux/kallsyms.h unconditionally for print_symbol().
Signed-off-by: Randy Dunlap <[email protected]>
---
arch/x86_64/kernel/traps.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
--- linux-2619-rc1-pv.orig/arch/x86_64/kernel/traps.c
+++ linux-2619-rc1-pv/arch/x86_64/kernel/traps.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/nmi.h>
@@ -115,7 +116,6 @@ static int call_trace = 1;
#endif
#ifdef CONFIG_KALLSYMS
-# include <linux/kallsyms.h>
void printk_address(unsigned long address)
{
unsigned long offset = 0, symsize;
>
> You don't have CONFIG_KALLSYMS enabled?
>
> Does this patch fix the build for you?
Added thanks
-Andi
On Thu, 5 Oct 2006 09:59:44 -0700 Randy Dunlap wrote:
> On Thu, 5 Oct 2006 18:49:16 +0200 Voluspa wrote:
>
> > AR arch/x86_64/lib/lib.a
> > GEN .version
> > CHK include/linux/compile.h
> > UPD include/linux/compile.h
> > CC init/version.o
> > LD init/built-in.o
> > LD vmlinux
> > arch/x86_64/kernel/built-in.o: In function
> > `print_trace_warning_symbol':
> > traps.c:(.text.print_trace_warning_symbol+0xa): undefined reference
> > to `print_symbol' make: *** [vmlinux] Error 1
>
> You don't have CONFIG_KALLSYMS enabled?
Never. I like to keep the kernel as lean as possible until some
bug-reporting requires otherwise.
>
> Does this patch fix the build for you?
Perfect. Thanx. Built, but haven't booted yet.
Mvh
Mats Johannesson
Alistair John Strachan wrote:
> Booted fine here, but I've got a few strange messages from the firewire
> subsystem that weren't present in 2.6.18. I think it marginally slows down
> boot up, but I could just be imagining it.
>
> [alistair] 16:04 [~] dmesg | grep 1394
> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ohci1394: fw-host0: Running dma failed because Node ID is not valid
> ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
> ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
> ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
Thanks for the quick report. Could you please test the following, each
one separately?
A. Configure PCI_MULTITHREAD_PROBE=n
B. Revert patch "Initialize ieee1394 early when built in"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=8df4083c5291b3647e0381d3c69ab2196f5dd3b7
I don't see how any other ohci1394 patch after 2.6.18 could lead up to
that message. I also don't understand what causes this glitch. At least
it seems recoverable, according to the "Host added" lines.
--
Stefan Richter
-=====-=-==- =-=- --=-=
http://arcgraph.de/sr/
Linus Torvalds <[email protected]> writes:
> Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
...
> so please give it a good testing, and let's see if there are any
> regressions.
The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.
Signed-off-by: Peter Osterlund <[email protected]>
---
fs/udf/super.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 1d3b5d2..1aea6a4 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1621,9 +1621,10 @@ #endif
goto error_out;
}
- if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_READ_ONLY)
+ if (UDF_SB_PARTFLAGS(sb, UDF_SB_PARTITION(sb)) & UDF_PART_FLAG_READ_ONLY) {
printk("UDF-fs: Partition marked readonly; forcing readonly mount\n");
sb->s_flags |= MS_RDONLY;
+ }
if ( udf_find_fileset(sb, &fileset, &rootdir) )
{
--
Peter Osterlund - [email protected]
http://web.telia.com/~u89404340
Peter Osterlund wrote:
> Linus Torvalds <[email protected]> writes:
>
>> Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
> ...
>> so please give it a good testing, and let's see if there are any
>> regressions.
>
> The UDF filesystem can't be mounted in read-write mode any more,
> because of forgotten braces.
Urgh.
Thanks...
-Eric
Benjamin Herrenschmidt <[email protected]> writes:
> On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
>> Contrary to popular belief, there are people who test -rc kernels
>> and report bugs.
>>
>> And there are even people who test -git kernels.
>>
>> This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
>>
>> If you find your name in the Cc header, you are either submitter of one
>> of the bugs, maintainer of an affectected subsystem or driver, a patch
>> of you was declared guilty for a breakage or I'm considering you in any
>> other way possibly involved with one or more of these issues.
>>
>> Due to the huge amount of recipients, please trim the Cc when answering.
>
> Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
> yet.
Does not even boot for me (iBook G4).
Andreas.
--
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux Products GmbH, Maxfeldstra?e 5, 90409 N?rnberg, Germany
PGP key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
On Thursday 05 October 2006 19:56, Stefan Richter wrote:
> Alistair John Strachan wrote:
> > Booted fine here, but I've got a few strange messages from the firewire
> > subsystem that weren't present in 2.6.18. I think it marginally slows
> > down boot up, but I could just be imagining it.
> >
> > [alistair] 16:04 [~] dmesg | grep 1394
> > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
> > MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
> > ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17]
> > MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
> > ohci1394: fw-host0: Running dma failed because Node ID is not valid
> > ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
> > ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
> > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
> > ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
>
> Thanks for the quick report. Could you please test the following, each
> one separately?
>
> A. Configure PCI_MULTITHREAD_PROBE=n
Not set.
> B. Revert patch "Initialize ieee1394 early when built in"
> http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
>itdiff_plain;h=8df4083c5291b3647e0381d3c69ab2196f5dd3b7
Firewire isn't built in. I assume therefore this would have no effect.
> I don't see how any other ohci1394 patch after 2.6.18 could lead up to
> that message. I also don't understand what causes this glitch. At least
> it seems recoverable, according to the "Host added" lines.
I haven't tried to use it, but I agree that the outcome is similar. I
recompiled with excessive debug output on 2.6.19-rc1, and uploaded the
configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As
you can see, 2.6.18 does not exhibit any problems.
--
Cheers,
Alistair.
Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
On Thursday 05 October 2006 21:30, Alistair John Strachan wrote:
[snip]
> I haven't tried to use it, but I agree that the outcome is similar. I
> recompiled with excessive debug output on 2.6.19-rc1, and uploaded the
> configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As
> you can see, 2.6.18 does not exhibit any problems.
Forgetting the URL; apologies:
http://devzero.co.uk/~alistair/ieee1394/
--
Cheers,
Alistair.
Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
On Wed, Oct 04, 2006 at 08:29:16PM -0700, Linus Torvalds wrote:
> 4998 total commits
> 6535 files changed, 414890 insertions(+), 233881 deletions(-)
commit 0181944fe647cae18d545ac1167df3d15d393701 adds a
'extended_error_logging' global variable to qla2xxx which is defined by
qla4xxx too.
Trying to build both drivers results in the following error:
LD drivers/scsi/built-in.o
drivers/scsi/qla4xxx/built-in.o: In function
`qla4xxx_slave_configure':
drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of
`extended_error_logging'
drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
first defined here
make[2]: *** [drivers/scsi/built-in.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
The following patch simply adds a qla2_ (qla4_ respectively) prefix to
the variable name.
Regards,
Frederik
Signed-off-by: Frederik Deweerdt <[email protected]>
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 5334253..90dad7e 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -38,7 +38,7 @@ #endif
* Macros use for debugging the driver.
*/
-#define DEBUG(x) do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG(x) do { if (qla2_extended_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_1)
#define DEBUG1(x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else
#define DEBUG1(x) do {} while (0)
#endif
-#define DEBUG2(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_3(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_3_11(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_9_10(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_11(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_13(x) do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2_3(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2_3_11(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2_9_10(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2_11(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2_13(x) do { if (qla2_extended_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_3)
#define DEBUG3(x) do {x;} while (0)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index bef7011..990b897 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xallocfwdump;
-extern int extended_error_logging;
+extern int qla2_extended_error_logging;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d5d2627..833b930 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1644,7 +1644,7 @@ #endif
* Set host adapter parameters.
*/
if (nv->host_p[0] & BIT_7)
- extended_error_logging = 1;
+ qla2_extended_error_logging = 1;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3ba8c23..3f20d76 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,
"during HBA initialization. Memory allocation requirements "
"vary by ISP type. Default is 1 - allocate memory.");
-int extended_error_logging;
-module_param(extended_error_logging, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(extended_error_logging,
+int qla2_extended_error_logging;
+module_param(qla2_extended_error_logging, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(qla2_extended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging. 1 - log errors.");
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
- if (extended_error_logging)
+ if (qla2_extended_error_logging)
strcat(qla2x00_version_str, "-debug");
qla2xxx_transport_template =
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index 56ddc22..3e99dcf 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);
#endif
#if defined(QL_DEBUG_LEVEL_2)
-#define DEBUG2(x) do {if(extended_error_logging == 2) x;} while (0);
+#define DEBUG2(x) do {if(qla4_extended_error_logging == 2) x;} while (0);
#define DEBUG2_3(x) do {x;} while (0);
#else /* */
#define DEBUG2(x) do {} while (0);
#endif /* */
#if defined(QL_DEBUG_LEVEL_3)
-#define DEBUG3(x) do {if(extended_error_logging == 3) x;} while (0);
+#define DEBUG3(x) do {if(qla4_extended_error_logging == 3) x;} while (0);
#else /* */
#define DEBUG3(x) do {} while (0);
#if !defined(QL_DEBUG_LEVEL_2)
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 418fb7a..77a997a 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(struct
int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha,
uint32_t fw_ddb_index, uint32_t state);
-extern int extended_error_logging;
+extern int qla4_extended_error_logging;
extern int ql4xdiscoverywait;
extern int ql4xdontresethba;
#endif /* _QLA4x_GBL_H */
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index ed977f7..ef82399 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct s
DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
ha->host_no, num_valid_entries));
- if (extended_error_logging == 3) {
+ if (qla4_extended_error_logging == 3) {
if (oldest_entry == 0) {
/* Circular Buffer has not wrapped around */
for (i=0; i < num_valid_entries; i++) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5036ebf..178fcdd 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba,
" default it will reset hba :0"
" set to 1 to avoid resetting HBA");
-int extended_error_logging = 0; /* 0 = off, 1 = log errors */
-module_param(extended_error_logging, int, S_IRUGO | S_IRUSR);
-MODULE_PARM_DESC(extended_error_logging,
+int qla4_extended_error_logging = 0; /* 0 = off, 1 = log errors */
+module_param(qla4_extended_error_logging, int, S_IRUGO | S_IRUSR);
+MODULE_PARM_DESC(qla4_extended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging, 1 - debug logging");
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo
/* Derive version string. */
strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
- if (extended_error_logging)
+ if (qla4_extended_error_logging)
strcat(qla4xxx_version_str, "-debug");
qla4xxx_scsi_transport =
If my monitor is off during boot and I turn it on once KDE is fully
started, the screen remains black. If it stays on during boot, X will
work ok. This happens on a G5 with ' nVidia Corporation NV43 [GeForce 6600] (rev a2)'
The i2c errors are new.
...
nvidiafb: Device ID: 10de0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
i2c_adapter i2c-0: unable to read EDID block.
i2c_adapter i2c-0: unable to read EDID block.
ieee1394: Error parsing configrom for node 0-01:1023
i2c_adapter i2c-0: unable to read EDID block.
nvidiafb: Found OF EDID for head 1
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0x90000000)
...
346bc21026e7a92e1d7a4a1b3792c5e8b686133d is first bad commit
diff-tree 346bc21026e7a92e1d7a4a1b3792c5e8b686133d (from fc5891c8a3ba284f13994d7bc1f1bfa8283982de)
Author: Antonino A. Daplas <[email protected]>
Date: Tue Oct 3 01:14:43 2006 -0700
[PATCH] nvidiafb: Use generic DDC reading
Update driver to use generic DDC reading
Signed-off-by: Antonino Daplas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
:040000 040000 f20a7c1e3ce7d97a4b6e9bcde25b24685aeaabe4 9383ef67e1f4525eaaecd7d3c54685dea997dffc M drivers
git-bisect start
# bad: [d223a60106891bfe46febfacf46b20cd8509aaad] Linux 2.6.19-rc1
git-bisect bad d223a60106891bfe46febfacf46b20cd8509aaad
# good: [119248f4578ca60b09c20893724e10f19806e6f1] Linux v2.6.18. Arrr!
git-bisect good 119248f4578ca60b09c20893724e10f19806e6f1
# good: [ac7f6b5e44cb0982b98c31fa33298ba73fb5dcfc] Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
git-bisect good ac7f6b5e44cb0982b98c31fa33298ba73fb5dcfc
# good: [82965addad66fce61a92c5f03104ea90b0b87124] Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
git-bisect good 82965addad66fce61a92c5f03104ea90b0b87124
# bad: [c53c1bb94f30cecee79ca0a8e9977640338283be] knfsd: lockd: Add nlm_destroy_host
git-bisect bad c53c1bb94f30cecee79ca0a8e9977640338283be
# bad: [2dc350283d3ea194c954428d86025190cab47366] drivers/video/sis/sis_accel.h: removal of old code
git-bisect bad 2dc350283d3ea194c954428d86025190cab47366
# good: [a12f66fccf2e266ad197df142b5ebafc6a169a8c] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
git-bisect good a12f66fccf2e266ad197df142b5ebafc6a169a8c
# good: [829d464e60151a525c7ba57e7acfc4fc297f7069] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
git-bisect good 829d464e60151a525c7ba57e7acfc4fc297f7069
# good: [14e0a193209aeea810ad3d66388f422dc79c5b40] ide: fix revision comparison in ide_in_drive_list
git-bisect good 14e0a193209aeea810ad3d66388f422dc79c5b40
# bad: [bf5df0a2c54c2dc0fad619ac25d029119023610a] rivafb: Use generic DDC reading
git-bisect bad bf5df0a2c54c2dc0fad619ac25d029119023610a
# good: [a4bea10eca68152e84ffc4eaeb9d20ec2ac34664] Allow ide_generic_all to be used modular and built in
git-bisect good a4bea10eca68152e84ffc4eaeb9d20ec2ac34664
# good: [535a09ad59286b7675ffbf8b51d8ecb001c44386] rivafb: use constants instead of magic values
git-bisect good 535a09ad59286b7675ffbf8b51d8ecb001c44386
# good: [fc5891c8a3ba284f13994d7bc1f1bfa8283982de] fbdev: Add generic ddc read functionality
git-bisect good fc5891c8a3ba284f13994d7bc1f1bfa8283982de
# bad: [346bc21026e7a92e1d7a4a1b3792c5e8b686133d] nvidiafb: Use generic DDC reading
git-bisect bad 346bc21026e7a92e1d7a4a1b3792c5e8b686133d
On (05/10/06 22:27), Andreas Schwab didst pronounce:
> Benjamin Herrenschmidt <[email protected]> writes:
>
> > On Thu, 2006-10-05 at 06:28 +0200, Adrian Bunk wrote:
> >> Contrary to popular belief, there are people who test -rc kernels
> >> and report bugs.
> >>
> >> And there are even people who test -git kernels.
> >>
> >> This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
> >>
> >> If you find your name in the Cc header, you are either submitter of one
> >> of the bugs, maintainer of an affectected subsystem or driver, a patch
> >> of you was declared guilty for a breakage or I'm considering you in any
> >> other way possibly involved with one or more of these issues.
> >>
> >> Due to the huge amount of recipients, please trim the Cc when answering.
> >
> > Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down
> > yet.
>
> Does not even boot for me (iBook G4).
>
There may be a known issue with 32 bit PPC and CONFIG_HIGHMEM. If it is the
problem I think it is, there is a patch below but we haven't been able to
fins a machine to confirm it fixes it.
Can you please confirm that CONFIG_HIGHMEM is set on your machine? If it is,
can you unset it and see does it boot? If it boots, this patch should allow
the kernel to boot with CONFIG_HIGHMEM.
Thanks
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/i386/kernel/setup.c linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/kernel/setup.c
--- linux-2.6.18-git19-clean/arch/i386/kernel/setup.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/kernel/setup.c 2006-10-03 11:15:59.000000000 +0100
@@ -1083,16 +1083,15 @@ static unsigned long __init setup_memory
void __init zone_sizes_init(void)
{
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn,
- highend_pfn};
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
add_active_range(0, 0, highend_pfn);
#else
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn};
add_active_range(0, 0, max_low_pfn);
#endif
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/i386/mm/discontig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/mm/discontig.c
--- linux-2.6.18-git19-clean/arch/i386/mm/discontig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/mm/discontig.c 2006-10-03 11:17:27.000000000 +0100
@@ -357,11 +357,12 @@ void __init numa_kva_reserve(void)
void __init zone_sizes_init(void)
{
int nid;
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn,
- highend_pfn
- };
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
/* If SRAT has not registered memory, register it now */
if (find_max_pfn_with_active_regions() == 0) {
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ia64/mm/contig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/contig.c
--- linux-2.6.18-git19-clean/arch/ia64/mm/contig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/contig.c 2006-10-03 11:21:09.000000000 +0100
@@ -233,6 +233,7 @@ paging_init (void)
efi_memmap_walk(count_pages, &num_physpages);
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = max_dma;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ia64/mm/discontig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/discontig.c
--- linux-2.6.18-git19-clean/arch/ia64/mm/discontig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/discontig.c 2006-10-03 11:21:54.000000000 +0100
@@ -709,6 +709,7 @@ void __init paging_init(void)
max_pfn = mem_data[node].max_pfn;
}
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = max_dma;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
free_area_init_nodes(max_zone_pfns);
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/powerpc/mm/mem.c linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/mem.c
--- linux-2.6.18-git19-clean/arch/powerpc/mm/mem.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/mem.c 2006-10-03 11:10:57.000000000 +0100
@@ -307,11 +307,12 @@ void __init paging_init(void)
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
- max_zone_pfns[1] = top_of_ram >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
#else
- max_zone_pfns[0] = top_of_ram >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
#endif
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/powerpc/mm/numa.c linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/numa.c
--- linux-2.6.18-git19-clean/arch/powerpc/mm/numa.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/numa.c 2006-10-03 11:12:01.000000000 +0100
@@ -617,9 +617,9 @@ void __init do_init_bootmem(void)
void __init paging_init(void)
{
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- lmb_end_of_DRAM() >> PAGE_SHIFT
- };
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ppc/mm/init.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ppc/mm/init.c
--- linux-2.6.18-git19-clean/arch/ppc/mm/init.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ppc/mm/init.c 2006-10-03 11:13:46.000000000 +0100
@@ -374,11 +374,12 @@ void __init paging_init(void)
end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
add_active_range(0, start_pfn, end_pfn);
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
- max_zone_pfns[1] = total_memory >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
#else
- max_zone_pfns[0] = total_memory >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/x86_64/mm/init.c linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/init.c
--- linux-2.6.18-git19-clean/arch/x86_64/mm/init.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/init.c 2006-10-03 11:18:54.000000000 +0100
@@ -406,9 +406,12 @@ void __cpuinit zap_low_mappings(int cpu)
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {MAX_DMA_PFN,
- MAX_DMA32_PFN,
- end_pfn};
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+ max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+ max_zone_pfns[ZONE_NORMAL] = end_pfn;
+
memory_present(0, 0, end_pfn);
sparse_init();
free_area_init_nodes(max_zone_pfns);
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/x86_64/mm/numa.c linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/numa.c
--- linux-2.6.18-git19-clean/arch/x86_64/mm/numa.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/numa.c 2006-10-03 11:19:47.000000000 +0100
@@ -338,9 +338,11 @@ static void __init arch_sparse_init(void
void __init paging_init(void)
{
int i;
- unsigned long max_zone_pfns[MAX_NR_ZONES] = { MAX_DMA_PFN,
- MAX_DMA32_PFN,
- end_pfn};
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+ max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+ max_zone_pfns[ZONE_NORMAL] = end_pfn;
arch_sparse_init();
--
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
On Thu, 05 Oct 2006, Frederik Deweerdt wrote:
> On Wed, Oct 04, 2006 at 08:29:16PM -0700, Linus Torvalds wrote:
> > 4998 total commits
> > 6535 files changed, 414890 insertions(+), 233881 deletions(-)
> commit 0181944fe647cae18d545ac1167df3d15d393701 adds a
> 'extended_error_logging' global variable to qla2xxx which is defined by
> qla4xxx too.
> Trying to build both drivers results in the following error:
>
> LD drivers/scsi/built-in.o
> drivers/scsi/qla4xxx/built-in.o: In function
> `qla4xxx_slave_configure':
> drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of
> `extended_error_logging'
> drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
> first defined here
> make[2]: *** [drivers/scsi/built-in.o] Error 1
> make[1]: *** [drivers/scsi] Error 2
> make: *** [drivers] Error 2
>
> The following patch simply adds a qla2_ (qla4_ respectively) prefix to
> the variable name.
Thanks for doing this, but could I suggest the following instead which
will at least maintain some consistency (yes, I know it's lacking)
with other qla2xxx module-parameter prefixes (ql2x and ql4x).
---
Signed-off-by: Andrew Vasquez <[email protected]>
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 5334253..3a91709 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -38,7 +38,7 @@ #endif
* Macros use for debugging the driver.
*/
-#define DEBUG(x) do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG(x) do { if (ql2xextened_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_1)
#define DEBUG1(x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else
#define DEBUG1(x) do {} while (0)
#endif
-#define DEBUG2(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_3(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_3_11(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_9_10(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_11(x) do { if (extended_error_logging) { x; } } while (0)
-#define DEBUG2_13(x) do { if (extended_error_logging) { x; } } while (0)
+#define DEBUG2(x) do { if (ql2xextened_error_logging) { x; } } while (0)
+#define DEBUG2_3(x) do { if (ql2xextened_error_logging) { x; } } while (0)
+#define DEBUG2_3_11(x) do { if (ql2xextened_error_logging) { x; } } while (0)
+#define DEBUG2_9_10(x) do { if (ql2xextened_error_logging) { x; } } while (0)
+#define DEBUG2_11(x) do { if (ql2xextened_error_logging) { x; } } while (0)
+#define DEBUG2_13(x) do { if (ql2xextened_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_3)
#define DEBUG3(x) do {x;} while (0)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index bef7011..e9aa2c0 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xallocfwdump;
-extern int extended_error_logging;
+extern int ql2xextened_error_logging;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d5d2627..06e0f54 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1644,7 +1644,7 @@ #endif
* Set host adapter parameters.
*/
if (nv->host_p[0] & BIT_7)
- extended_error_logging = 1;
+ ql2xextened_error_logging = 1;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3ba8c23..a08f64c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,
"during HBA initialization. Memory allocation requirements "
"vary by ISP type. Default is 1 - allocate memory.");
-int extended_error_logging;
-module_param(extended_error_logging, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(extended_error_logging,
+int ql2xextened_error_logging;
+module_param(ql2xextened_error_logging, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xextened_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging. 1 - log errors.");
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
- if (extended_error_logging)
+ if (ql2xextened_error_logging)
strcat(qla2x00_version_str, "-debug");
qla2xxx_transport_template =
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index 56ddc22..d31a747 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);
#endif
#if defined(QL_DEBUG_LEVEL_2)
-#define DEBUG2(x) do {if(extended_error_logging == 2) x;} while (0);
+#define DEBUG2(x) do {if(ql4xextened_error_logging == 2) x;} while (0);
#define DEBUG2_3(x) do {x;} while (0);
#else /* */
#define DEBUG2(x) do {} while (0);
#endif /* */
#if defined(QL_DEBUG_LEVEL_3)
-#define DEBUG3(x) do {if(extended_error_logging == 3) x;} while (0);
+#define DEBUG3(x) do {if(ql4xextened_error_logging == 3) x;} while (0);
#else /* */
#define DEBUG3(x) do {} while (0);
#if !defined(QL_DEBUG_LEVEL_2)
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 418fb7a..f20ce65 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(struct
int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha,
uint32_t fw_ddb_index, uint32_t state);
-extern int extended_error_logging;
+extern int ql4xextened_error_logging;
extern int ql4xdiscoverywait;
extern int ql4xdontresethba;
#endif /* _QLA4x_GBL_H */
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index ed977f7..dfaacbd 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct s
DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
ha->host_no, num_valid_entries));
- if (extended_error_logging == 3) {
+ if (ql4xextened_error_logging == 3) {
if (oldest_entry == 0) {
/* Circular Buffer has not wrapped around */
for (i=0; i < num_valid_entries; i++) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5036ebf..cce7ea8 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba,
" default it will reset hba :0"
" set to 1 to avoid resetting HBA");
-int extended_error_logging = 0; /* 0 = off, 1 = log errors */
-module_param(extended_error_logging, int, S_IRUGO | S_IRUSR);
-MODULE_PARM_DESC(extended_error_logging,
+int ql4xextened_error_logging = 0; /* 0 = off, 1 = log errors */
+module_param(ql4xextened_error_logging, int, S_IRUGO | S_IRUSR);
+MODULE_PARM_DESC(ql4xextened_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging, 1 - debug logging");
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo
/* Derive version string. */
strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
- if (extended_error_logging)
+ if (ql4xextened_error_logging)
strcat(qla4xxx_version_str, "-debug");
qla4xxx_scsi_transport =
Alistair John Strachan wrote:
> On Thursday 05 October 2006 21:30, Alistair John Strachan wrote:
> [snip]
>> I haven't tried to use it, but I agree that the outcome is similar. I
>> recompiled with excessive debug output on 2.6.19-rc1, and uploaded the
>> configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As
>> you can see, 2.6.18 does not exhibit any problems.
>
> Forgetting the URL; apologies:
>
> http://devzero.co.uk/~alistair/ieee1394/
Thanks. From the 2.6.19-rc1 dmesg: The ieee1394 core inserts a packet
before there was the first bus reset and first self ID stage completed.
This shouldn't happen. Also, the packet looks a bit weird but that is
probably because some base variables are still zero when this packet is
sent:
[ 39.513301] ieee1394: send packet at S100: ffc00140 0000ffff f0000234
destination = ffc0: node 0 on local FireWire bus (this is the host's
node; there isn't any other one anyway)
transaction label = 0: OK
retry code = 1: bogus, should be 0 as the first attempt
transaction code = 4: quadlet read request (usually used "much" later by
higher-level code, i.e. ieee1394's nodemgr, after self ID stage was
properly completed plus a pause)
pri = 0: OK
source ID = 0000: not OK, should be ffc0 on proper packets
destination offset = ffff f000 0234: this is the address of the
BROADCAST_CHANNEL register (usually read "much" later by ieee1394's
nodemgr to probe capabilities of an IRM: nodemgr_check_irm_capability()
calls this.)
It does indeed look like the nodemgr kicked in prematurely. After some
other messages from lower levels and from different contexts, there is
also a sign of nodemgr_check_irm_capability() failing (it can only fail
this early):
[ 40.298112] ieee1394: Current remote IRM is not 1394a-2000 compliant,
resetting...
OK. Enough with the boring details. Maybe the following patch doesn't
work entirely as I intended:
"ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
I think if you revert the next patch first...
"ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutex"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=cab8d154e2ed43fe1495aa0e18103e747552891b
...you can then revert the 'switch to kthread' patch and see if the
message "Running dma failed because Node ID is not valid" disappears.
Would be nice if you could test that.
--
Stefan Richter
-=====-=-==- =-=- --=-=
http://arcgraph.de/sr/
On Thursday 05 October 2006 23:16, Stefan Richter wrote:
[snip]
> It does indeed look like the nodemgr kicked in prematurely. After some
> other messages from lower levels and from different contexts, there is
> also a sign of nodemgr_check_irm_capability() failing (it can only fail
> this early):
>
> [ 40.298112] ieee1394: Current remote IRM is not 1394a-2000 compliant,
> resetting...
>
> OK. Enough with the boring details. Maybe the following patch doesn't
> work entirely as I intended:
> "ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
> http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
>itdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
>
> I think if you revert the next patch first...
> "ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutex"
> http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
>itdiff_plain;h=cab8d154e2ed43fe1495aa0e18103e747552891b
>
> ...you can then revert the 'switch to kthread' patch and see if the
> message "Running dma failed because Node ID is not valid" disappears.
> Would be nice if you could test that.
Of course. I tried reverting these two, and it has not helped.
-rw-r--r-- 1 root root 562133 2006-10-05 23:29 kernel/drivers/ieee1394/ieee1394.ko
(KBUILD only regenerated this file, I hope that's correct.)
http://devzero.co.uk/~alistair/ieee1394/dmesg-2.6.19-rc1-reverts.gz
--
Cheers,
Alistair.
Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
Alistair John Strachan wrote:
> On Thursday 05 October 2006 23:16, Stefan Richter wrote:
>> ...you can then revert the 'switch to kthread' patch and see if the
>> message "Running dma failed because Node ID is not valid" disappears.
>> Would be nice if you could test that.
>
> Of course. I tried reverting these two, and it has not helped.
Thanks.
> -rw-r--r-- 1 root root 562133 2006-10-05 23:29 kernel/drivers/ieee1394/ieee1394.ko
>
> (KBUILD only regenerated this file, I hope that's correct.)
Yes.
> http://devzero.co.uk/~alistair/ieee1394/dmesg-2.6.19-rc1-reverts.gz
One more thing you could to try if you can spare the time:
Build and boot Linux _2.6.18_ after applying this patchkit:
http://me.in-berlin.de/~s5r6/linux1394/updates/
This is only little more of 1394 stuff than what is now in 2.6.19-rc1.
This test would at least give a hint if changes sent via the linux1394
git tree are the culprit, or some change from outside.
In case you are familiar with quilt, take the quilt variant of the
patchkit instead of the collapsed patch. Short instructions on the
patchkits are on the website. The quilt patchset would allow to hunt
down the bad patch by bisection --- if the bad one is among the 1394
updates in the first place.
--
Stefan Richter
-=====-=-==- =-=- --==-
http://arcgraph.de/sr/
[email protected] (Mel Gorman) writes:
> Can you please confirm that CONFIG_HIGHMEM is set on your machine?
Yes, it is.
> If it is, can you unset it and see does it boot?
I did, and it did.
> If it boots, this patch should allow the kernel to boot with
> CONFIG_HIGHMEM.
Bingo! :-)
Andreas.
--
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux Products GmbH, Maxfeldstra?e 5, 90409 N?rnberg, Germany
PGP key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
Linus Torvalds <[email protected]> writes:
> so please give it a good testing, and let's see if there are any
> regressions.
it breaks suspend when the airo module is loaded:
kernel: Stopping tasks: =================================================================================
kernel: stopping tasks timed out after 20 seconds (1 tasks remaining):
kernel: eth1
kernel: Restarting tasks...<6> Strange, eth1 not stopped
if i remove the airo module suspend works normally (this is on a
thinkpad t40).
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mind, it will be possible (simultaneously with |
| automatism and other passive states) to systematize confusion |
| and thus to help to discredit completely the world of reality. |
Hello,
Gene Heskett wrote:
> But once my usual .config was achieved, it back to business as
> usual, complete with my logs being littered with this message:
>
> Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB device using
> ohci_hcd and address 3
>
> This is my only (so far) minor nit to pick.
>
> [root@coyote linux-2.6.19-rc1]# lsusb
> [...]
> Bus 003 Device 003: ID 045e:008c Microsoft Corp.
> [...]
I saw that, too. But I have
zeisberg@cepheus:~$ lsusb
Bus 001 Device 002: ID 046d:c00b Logitech, Inc. MouseMan Wheel
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
And whenever the reset occured, my keyboard produced mulitple key events
when a key was pressed.
And since I didn't connect my usb cardreader anymore, the problem
disapeared. (Yes, it is not listed above. I'll try to find the time to
do some further testing.)
> This started at about the same time I jumped from a 2.6.16-something to the
> 2nd rc of 2.6.18
Same for me. (But at the same time I upgraded my machine from a Duron 600
to a Pentium D 940. So I thought it has to do with that.)
Best regards
Uwe
--
Uwe Zeisberger
$ dc -e "5735816763073014741799356604682P"
Hi Linus,
Arch-independent zone-sizing is using indices instead of symbolic names
to offset within an array related to zones (max_zone_pfns). The unintended
impact is that ZONE_DMA and ZONE_NORMAL is initialised on powerpc instead
of ZONE_DMA and ZONE_HIGHMEM when CONFIG_HIGHMEM is set. As a result, the
the machine fails to boot but will boot with CONFIG_HIGHMEM turned off.
The following patch properly initialises the max_zone_pfns[] array and uses
symbolic names instead of indices in each architecture using arch-independent
zone-sizing. Two users have successfully booted their powerpcs with it
(one an ibook G4). It has also been boot tested on x86, x86_64, ppc64 and
ia64. Please merge for 2.6.19-rc2.
Credit to Benjamin Herrenschmidt for identifying the bug and rolling the
first fix. Additional credit to Johannes Berg and Andreas Schwab for reporting
the problem and testing on powerpc.
Signed-off-by: Mel Gorman <[email protected]>
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/i386/kernel/setup.c linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/kernel/setup.c
--- linux-2.6.18-git19-clean/arch/i386/kernel/setup.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/kernel/setup.c 2006-10-03 11:15:59.000000000 +0100
@@ -1083,16 +1083,15 @@ static unsigned long __init setup_memory
void __init zone_sizes_init(void)
{
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn,
- highend_pfn};
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
add_active_range(0, 0, highend_pfn);
#else
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn};
add_active_range(0, 0, max_low_pfn);
#endif
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/i386/mm/discontig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/mm/discontig.c
--- linux-2.6.18-git19-clean/arch/i386/mm/discontig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/i386/mm/discontig.c 2006-10-03 11:17:27.000000000 +0100
@@ -357,11 +357,12 @@ void __init numa_kva_reserve(void)
void __init zone_sizes_init(void)
{
int nid;
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn,
- highend_pfn
- };
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
/* If SRAT has not registered memory, register it now */
if (find_max_pfn_with_active_regions() == 0) {
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ia64/mm/contig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/contig.c
--- linux-2.6.18-git19-clean/arch/ia64/mm/contig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/contig.c 2006-10-03 11:21:09.000000000 +0100
@@ -233,6 +233,7 @@ paging_init (void)
efi_memmap_walk(count_pages, &num_physpages);
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = max_dma;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ia64/mm/discontig.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/discontig.c
--- linux-2.6.18-git19-clean/arch/ia64/mm/discontig.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ia64/mm/discontig.c 2006-10-03 11:21:54.000000000 +0100
@@ -709,6 +709,7 @@ void __init paging_init(void)
max_pfn = mem_data[node].max_pfn;
}
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = max_dma;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
free_area_init_nodes(max_zone_pfns);
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/powerpc/mm/mem.c linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/mem.c
--- linux-2.6.18-git19-clean/arch/powerpc/mm/mem.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/mem.c 2006-10-03 11:10:57.000000000 +0100
@@ -307,11 +307,12 @@ void __init paging_init(void)
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
- max_zone_pfns[1] = top_of_ram >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
#else
- max_zone_pfns[0] = top_of_ram >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
#endif
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/powerpc/mm/numa.c linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/numa.c
--- linux-2.6.18-git19-clean/arch/powerpc/mm/numa.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/powerpc/mm/numa.c 2006-10-03 11:12:01.000000000 +0100
@@ -617,9 +617,9 @@ void __init do_init_bootmem(void)
void __init paging_init(void)
{
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- lmb_end_of_DRAM() >> PAGE_SHIFT
- };
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/ppc/mm/init.c linux-2.6.18-git19-use_zone_symbolic_names/arch/ppc/mm/init.c
--- linux-2.6.18-git19-clean/arch/ppc/mm/init.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/ppc/mm/init.c 2006-10-03 11:13:46.000000000 +0100
@@ -374,11 +374,12 @@ void __init paging_init(void)
end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
add_active_range(0, start_pfn, end_pfn);
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
- max_zone_pfns[1] = total_memory >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
#else
- max_zone_pfns[0] = total_memory >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
free_area_init_nodes(max_zone_pfns);
}
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/x86_64/mm/init.c linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/init.c
--- linux-2.6.18-git19-clean/arch/x86_64/mm/init.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/init.c 2006-10-03 11:18:54.000000000 +0100
@@ -406,9 +406,12 @@ void __cpuinit zap_low_mappings(int cpu)
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {MAX_DMA_PFN,
- MAX_DMA32_PFN,
- end_pfn};
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+ max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+ max_zone_pfns[ZONE_NORMAL] = end_pfn;
+
memory_present(0, 0, end_pfn);
sparse_init();
free_area_init_nodes(max_zone_pfns);
diff -rup -X /usr/src/patchset-0.6/bin//dontdiff linux-2.6.18-git19-clean/arch/x86_64/mm/numa.c linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/numa.c
--- linux-2.6.18-git19-clean/arch/x86_64/mm/numa.c 2006-10-03 09:12:56.000000000 +0100
+++ linux-2.6.18-git19-use_zone_symbolic_names/arch/x86_64/mm/numa.c 2006-10-03 11:19:47.000000000 +0100
@@ -338,9 +338,11 @@ static void __init arch_sparse_init(void
void __init paging_init(void)
{
int i;
- unsigned long max_zone_pfns[MAX_NR_ZONES] = { MAX_DMA_PFN,
- MAX_DMA32_PFN,
- end_pfn};
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
+ max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
+ max_zone_pfns[ZONE_NORMAL] = end_pfn;
arch_sparse_init();
On Friday 06 October 2006 04:36, Uwe Zeisberger wrote:
>Hello,
>
>Gene Heskett wrote:
>> But once my usual .config was achieved, it back to business as
>> usual, complete with my logs being littered with this message:
>>
>> Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB device
>> using ohci_hcd and address 3
>>
>> This is my only (so far) minor nit to pick.
>>
>> [root@coyote linux-2.6.19-rc1]# lsusb
>> [...]
>> Bus 003 Device 003: ID 045e:008c Microsoft Corp.
>> [...]
>
>I saw that, too. But I have
>
> zeisberg@cepheus:~$ lsusb
> Bus 001 Device 002: ID 046d:c00b Logitech, Inc. MouseMan Wheel
> Bus 001 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
>
>And whenever the reset occured, my keyboard produced mulitple key events
>when a key was pressed.
>
My keyboard, a ps2 microsoftie thats about got the legends worn from the
keycaps, has not exhibited any such behaviour.
>And since I didn't connect my usb cardreader anymore, the problem
>disapeared. (Yes, it is not listed above. I'll try to find the time to
>do some further testing.)
>
>> This started at about the same time I jumped from a 2.6.16-something to
>> the 2nd rc of 2.6.18
>
>Same for me. (But at the same time I upgraded my machine from a Duron
> 600 to a Pentium D 940. So I thought it has to do with that.)
No hardware updates here recently, the most recent addition being a wap11
for my lappy. And I believe that was up and running for at least 2 months
before this started. Mobo is an older (now) biostar, gig of ram, XP-2800
Athlon, 333 fsb. Accessory 4 port usb1.1 hub in front panel for usb
expansion. 7 usb devices total. But only 5 are alive ATM, and one of
those doesn't properly ID itself, a pl2303 usb-seriel adaptor thats
plugged in but not in use. $40 and it doesn't honor flow control either
style or way.
Thanks Uwe.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
I wrote:
> One more thing you could to try if you can spare the time:
>
> Build and boot Linux _2.6.18_ after applying this patchkit:
Not necessary anymore.
I saw the messages and the delay that you described now too, using Linux
2.6.18 + all IEEE 1394 updates. I will continue to narrow the cause down.
Thanks,
--
Stefan Richter
-=====-=-==- =-=- --==-
http://arcgraph.de/sr/
Signed-off-by: Andrew Vasquez <[email protected]>
---
> On Thu, 05 Oct 2006, Frederik Deweerdt wrote:
>
> > On Wed, Oct 04, 2006 at 08:29:16PM -0700, Linus Torvalds wrote:
> > > 4998 total commits
> > > 6535 files changed, 414890 insertions(+), 233881 deletions(-)
> > commit 0181944fe647cae18d545ac1167df3d15d393701 adds a
> > 'extended_error_logging' global variable to qla2xxx which is defined by
> > qla4xxx too.
> > Trying to build both drivers results in the following error:
> >
> > LD drivers/scsi/built-in.o
> > drivers/scsi/qla4xxx/built-in.o: In function
> > `qla4xxx_slave_configure':
> > drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of
> > `extended_error_logging'
> > drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
> > first defined here
> > make[2]: *** [drivers/scsi/built-in.o] Error 1
> > make[1]: *** [drivers/scsi] Error 2
> > make: *** [drivers] Error 2
> >
> > The following patch simply adds a qla2_ (qla4_ respectively) prefix to
> > the variable name.
>
> Thanks for doing this, but could I suggest the following instead which
> will at least maintain some consistency (yes, I know it's lacking)
> with other qla2xxx module-parameter prefixes (ql2x and ql4x).
Frederik's original patch made it into Linus' tree, James please add
this for the next scsi-rc-fixes.
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 90dad7e..5b12278 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -38,7 +38,7 @@ #endif
* Macros use for debugging the driver.
*/
-#define DEBUG(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG(x) do { if (ql2xextended_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_1)
#define DEBUG1(x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else
#define DEBUG1(x) do {} while (0)
#endif
-#define DEBUG2(x) do { if (qla2_extended_error_logging) { x; } } while (0)
-#define DEBUG2_3(x) do { if (qla2_extended_error_logging) { x; } } while (0)
-#define DEBUG2_3_11(x) do { if (qla2_extended_error_logging) { x; } } while (0)
-#define DEBUG2_9_10(x) do { if (qla2_extended_error_logging) { x; } } while (0)
-#define DEBUG2_11(x) do { if (qla2_extended_error_logging) { x; } } while (0)
-#define DEBUG2_13(x) do { if (qla2_extended_error_logging) { x; } } while (0)
+#define DEBUG2(x) do { if (ql2xextended_error_logging) { x; } } while (0)
+#define DEBUG2_3(x) do { if (ql2xextended_error_logging) { x; } } while (0)
+#define DEBUG2_3_11(x) do { if (ql2xextended_error_logging) { x; } } while (0)
+#define DEBUG2_9_10(x) do { if (ql2xextended_error_logging) { x; } } while (0)
+#define DEBUG2_11(x) do { if (ql2xextended_error_logging) { x; } } while (0)
+#define DEBUG2_13(x) do { if (ql2xextended_error_logging) { x; } } while (0)
#if defined(QL_DEBUG_LEVEL_3)
#define DEBUG3(x) do {x;} while (0)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 7da6983..b51ce8f 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xallocfwdump;
-extern int qla2_extended_error_logging;
+extern int ql2xextended_error_logging;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 833b930..d5e0a12 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1644,7 +1644,7 @@ #endif
* Set host adapter parameters.
*/
if (nv->host_p[0] & BIT_7)
- qla2_extended_error_logging = 1;
+ ql2xextended_error_logging = 1;
ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
/* Always load RISC code on non ISP2[12]00 chips. */
if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3f20d76..34b6eb7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,
"during HBA initialization. Memory allocation requirements "
"vary by ISP type. Default is 1 - allocate memory.");
-int qla2_extended_error_logging;
-module_param(qla2_extended_error_logging, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(qla2_extended_error_logging,
+int ql2xextended_error_logging;
+module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging. 1 - log errors.");
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
- if (qla2_extended_error_logging)
+ if (ql2xextended_error_logging)
strcat(qla2x00_version_str, "-debug");
qla2xxx_transport_template =
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index 3e99dcf..d861c3b 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);
#endif
#if defined(QL_DEBUG_LEVEL_2)
-#define DEBUG2(x) do {if(qla4_extended_error_logging == 2) x;} while (0);
+#define DEBUG2(x) do {if(ql4xextended_error_logging == 2) x;} while (0);
#define DEBUG2_3(x) do {x;} while (0);
#else /* */
#define DEBUG2(x) do {} while (0);
#endif /* */
#if defined(QL_DEBUG_LEVEL_3)
-#define DEBUG3(x) do {if(qla4_extended_error_logging == 3) x;} while (0);
+#define DEBUG3(x) do {if(ql4xextended_error_logging == 3) x;} while (0);
#else /* */
#define DEBUG3(x) do {} while (0);
#if !defined(QL_DEBUG_LEVEL_2)
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 2c803ed..1b221ff 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(struct
int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha,
uint32_t fw_ddb_index, uint32_t state);
-extern int qla4_extended_error_logging;
+extern int ql4xextended_error_logging;
extern int ql4xdiscoverywait;
extern int ql4xdontresethba;
#endif /* _QLA4x_GBL_H */
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index ef82399..b721dc5 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct s
DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
ha->host_no, num_valid_entries));
- if (qla4_extended_error_logging == 3) {
+ if (ql4xextended_error_logging == 3) {
if (oldest_entry == 0) {
/* Circular Buffer has not wrapped around */
for (i=0; i < num_valid_entries; i++) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 178fcdd..dc3615f 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba,
" default it will reset hba :0"
" set to 1 to avoid resetting HBA");
-int qla4_extended_error_logging = 0; /* 0 = off, 1 = log errors */
-module_param(qla4_extended_error_logging, int, S_IRUGO | S_IRUSR);
-MODULE_PARM_DESC(qla4_extended_error_logging,
+int ql4xextended_error_logging = 0; /* 0 = off, 1 = log errors */
+module_param(ql4xextended_error_logging, int, S_IRUGO | S_IRUSR);
+MODULE_PARM_DESC(ql4xextended_error_logging,
"Option to enable extended error logging, "
"Default is 0 - no logging, 1 - debug logging");
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo
/* Derive version string. */
strcpy(qla4xxx_version_str, QLA4XXX_DRIVER_VERSION);
- if (qla4_extended_error_logging)
+ if (ql4xextended_error_logging)
strcat(qla4xxx_version_str, "-debug");
qla4xxx_scsi_transport =
I wrote:
> I saw the messages and the delay that you described now too, using Linux
> 2.6.18 + all IEEE 1394 updates. I will continue to narrow the cause down.
It's as I suspected:
"ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
Before that, I get a selfID-complete event, then nodemgr starts its
work. After that its the reverse, which lets nodemgr inject a packet
before the bus is completely ready. (So it's actually a regression in
ieee1394 core's high-level functions, not in ohci1394. And it's harmless.)
I will post when I have a fix.
--
Stefan Richter
-=====-=-==- =-=- --==-
http://arcgraph.de/sr/
On Wed, 4 Oct 2006, Linus Torvalds wrote:
>
> Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
>
> As usual for -rc1 with a lot of pending merges, it's a huge thing with
> tons of changes, and in fact since 2.6.18 took longer than normal due to
> me traveling (and others probably also being on vacations), it's possibly
> even larger than usual.
>
> I think we got updates to pretty much all of the active architectures,
> we've got VM changes (dirty shared page tracking, for example), we've got
> networking, drivers, you name it. Even the shortlog and the diffstats are
> too big to make the kernel mailing list, but even just the summary says
> something:
>
> 4998 total commits
> 6535 files changed, 414890 insertions(+), 233881 deletions(-)
>
> so please give it a good testing, and let's see if there are any
> regressions.
>
In dmesg:
warning: process `sleep' used the removed sysctl system call
warning: process `alsactl' used the removed sysctl system call
warning: process `nscd' used the removed sysctl system call
warning: process `tail' used the removed sysctl system call
ver_linux says:
/~ $ ./src/kernel/linux-2.6.19-rc1/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux grinch 2.6.19-rc1 #1 PREEMPT Thu Oct 5 22:53:57 EEST 2006 i686
unknown unknown GNU/Linux
Gnu C 3.3.4
Gnu make 3.80
binutils 2.15.92.0.2
util-linux 2.12p
mount 2.12p
module-init-tools 3.1
e2fsprogs 1.35
jfsutils 1.1.11
reiserfsprogs 3.6.18
xfsprogs 2.6.13
quota-tools 3.12.
nfs-utils 1.0.7
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Linux C++ Library 5.0.6
Procps 3.2.5
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
/~ $ /usr/sbin/alsactl -v
alsactl version 1.0.10
In Documentation/feature-removal-schedule.txt it says:
---------------------------
What: sys_sysctl
When: January 2007
Why: The same information is available through /proc/sys and that is
the
interface user space prefers to use. And there do not appear to be
any existing user in user space of sys_sysctl. The additional
maintenance overhead of keeping a set of binary names gets
in the way of doing a good job of maintaining this interface.
Who: Eric Biederman <[email protected]>
---------------------------
I can upgrade my userspace (Slackware 10.1) if necessary ;)
Bye
Calin
--
"frate, trezeste-te, aici nu-i razboiul stelelor"
Radu R. pe offtopic at lug.ro
On Fri, 6 Oct 2006, [email protected] wrote:
>
> In dmesg:
> warning: process `sleep' used the removed sysctl system call
> warning: process `alsactl' used the removed sysctl system call
> warning: process `nscd' used the removed sysctl system call
> warning: process `tail' used the removed sysctl system call
You need to compile with CONFIG_SYSCLT set to 'y' rather than 'n'.
Alternatively, you can probably fix it by just upgrading user-land, but
the SYSCLT thing _does_ still exist, it's just deprecated and defaults to
off by default..
(Or you can possibly even choose to just ignore the warnings, they
probably won't affect any actual behaviour)
Linus
Alistair, could you please test the following one-liner on top of
2.6.19-rc1?
-----------------
Date: Fri, 6 Oct 2006 19:49:52 +0200 (CEST)
From: Stefan Richter <[email protected]>
Subject: ieee1394: nodemgr: fix startup of knodemgrd
Revert a thinko in commit d2f119fe319528da8c76a1107459d6f478cbf28c:
When knodemgrd starts, it needs to sleep until host->generation was
incremented above its initial value of 0. My wrong logic caused it to
start sending requests when the bus wasn't completely ready. Seen as
"AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1.
Signed-off-by: Stefan Richter <[email protected]>
---
Index: linux/drivers/ieee1394/nodemgr.c
===================================================================
--- linux.orig/drivers/ieee1394/nodemgr.c 2006-10-06 19:20:00.000000000 +0200
+++ linux/drivers/ieee1394/nodemgr.c 2006-10-06 19:26:28.000000000 +0200
@@ -1614,7 +1614,7 @@ static int nodemgr_host_thread(void *__h
{
struct host_info *hi = (struct host_info *)__hi;
struct hpsb_host *host = hi->host;
- unsigned int g, generation = get_hpsb_generation(host) - 1;
+ unsigned int g, generation = 0;
int i, reset_cycles = 0;
/* Setup our device-model entries */
On Thu, Oct 05, 2006 at 09:31:16PM -0700, Alex Romosan wrote:
> Linus Torvalds <[email protected]> writes:
>
> > so please give it a good testing, and let's see if there are any
> > regressions.
>
> it breaks suspend when the airo module is loaded:
>
> kernel: Stopping tasks: =================================================================================
> kernel: stopping tasks timed out after 20 seconds (1 tasks remaining):
> kernel: eth1
> kernel: Restarting tasks...<6> Strange, eth1 not stopped
>
> if i remove the airo module suspend works normally (this is on a
> thinkpad t40).
Thanks for your report.
Let's try to figure out what broke it.
As a first step, please replace drivers/net/wireless/airo.c with the
version in 2.6.18 and check whether this fixes the issue (you can ignore
the deprecated warning during compilation).
> --alex--
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Linus Torvalds <[email protected]> writes:
> On Fri, 6 Oct 2006, [email protected] wrote:
>>
>> In dmesg:
>> warning: process `sleep' used the removed sysctl system call
>> warning: process `alsactl' used the removed sysctl system call
>> warning: process `nscd' used the removed sysctl system call
>> warning: process `tail' used the removed sysctl system call
>
> You need to compile with CONFIG_SYSCLT set to 'y' rather than 'n'.
>
> Alternatively, you can probably fix it by just upgrading user-land, but
> the SYSCLT thing _does_ still exist, it's just deprecated and defaults to
> off by default..
>
> (Or you can possibly even choose to just ignore the warnings, they
> probably won't affect any actual behaviour)
I'm tempted to submit a patch that just kills the warning.
The only known user is lipthreads from glibc performing.
if ! uname -v | grep "SMP" ; then
....
fi
That code if it gets -ENOSYS reads /proc/sys/kernel/version,
and it has worked this way since the day it was written.
I have been looking for other uses of sys_sysctl but I haven't
found any. Why glibc doesn't call uname like any normal
program when it wants to uname information is beyond me.
Eric
On Fri, 6 Oct 2006 11:12:10 -0700 (PDT), Linus Torvalds <[email protected]> wrote:
>
>
>On Fri, 6 Oct 2006, [email protected] wrote:
>>
>> In dmesg:
>> warning: process `sleep' used the removed sysctl system call
>> warning: process `alsactl' used the removed sysctl system call
>> warning: process `nscd' used the removed sysctl system call
>> warning: process `tail' used the removed sysctl system call
>
>You need to compile with CONFIG_SYSCLT set to 'y' rather than 'n'.
>
>Alternatively, you can probably fix it by just upgrading user-land, but
>the SYSCLT thing _does_ still exist, it's just deprecated and defaults to
>off by default..
>
>(Or you can possibly even choose to just ignore the warnings, they
>probably won't affect any actual behaviour)
I get these:
grant@sempro:~$ dmesg |grep removed
warning: process `touch' used the removed sysctl system call
warning: process `touch' used the removed sysctl system call
warning: process `dd' used the removed sysctl system call
warning: process `ls' used the removed sysctl system call
warning: process `touch' used the removed sysctl system call
too, box still works, slack-11.0 if it matters.
Grant.
On 05/10/06, Linus Torvalds <[email protected]> wrote:
>
> Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
>
> As usual for -rc1 with a lot of pending merges, it's a huge thing with
> tons of changes, and in fact since 2.6.18 took longer than normal due to
> me traveling (and others probably also being on vacations), it's possibly
> even larger than usual.
>
> I think we got updates to pretty much all of the active architectures,
> we've got VM changes (dirty shared page tracking, for example), we've got
> networking, drivers, you name it. Even the shortlog and the diffstats are
> too big to make the kernel mailing list, but even just the summary says
> something:
>
> 4998 total commits
> 6535 files changed, 414890 insertions(+), 233881 deletions(-)
>
> so please give it a good testing, and let's see if there are any
> regressions.
>
2.6.19-rc1-git2 :
...
CC arch/i386/mm/pgtable.o
CC arch/i386/mach-voyager/voyager_basic.o
CC arch/i386/mm/fault.o
CC arch/i386/kernel/ptrace.o
arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types
for 'voyager_timer_inte
rrupt'
include/asm/voyager.h:508: error: previous declaration of
'voyager_timer_interrupt' was here
arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types
for 'voyager_timer_inte
rrupt'
include/asm/voyager.h:508: error: previous declaration of
'voyager_timer_interrupt' was here
make[1]: *** [arch/i386/mach-voyager/voyager_basic.o] Error 1
make: *** [arch/i386/mach-voyager] Error 2
make: *** Waiting for unfinished jobs....
CC arch/i386/kernel/time.o
In file included from arch/i386/kernel/time.c:74:
include/asm-i386/mach-voyager/do_timer.h: In function `do_timer_interrupt_hook':
include/asm-i386/mach-voyager/do_timer.h:8: error: `irq_regs'
undeclared (first use in this
function)
include/asm-i386/mach-voyager/do_timer.h:8: error: (Each undeclared
identifier is reported o
nly once
include/asm-i386/mach-voyager/do_timer.h:8: error: for each function
it appears in.)
make[1]: *** [arch/i386/kernel/time.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC arch/i386/mm/ioremap.o
make: *** [arch/i386/kernel] Error 2
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
On Friday 06 October 2006 19:33, Stefan Richter wrote:
> Alistair, could you please test the following one-liner on top of
> 2.6.19-rc1?
Thanks Stefan, this fixes everything.
I'm puzzled and annoyed that I wasn't able to observe the same behaviour you
were with the mentioned patches reverted, I'm certain I did it correctly..
just as well you tried it.
--
Cheers,
Alistair.
Final year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
On Sat, 7 Oct 2006, Jesper Juhl wrote:
>
> arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types
> for 'voyager_timer_interrupt'
Gaah. That voyager timer handling is a bit confusing.
Maybe something like this would fix it?
Untested. Need James or the other alledged voyager-owner to actually test
or do somethign better..
Linus
---
diff --git a/include/asm-i386/mach-voyager/do_timer.h b/include/asm-i386/mach-voyager/do_timer.h
index 04e69c1..ada5bb9 100644
--- a/include/asm-i386/mach-voyager/do_timer.h
+++ b/include/asm-i386/mach-voyager/do_timer.h
@@ -3,12 +3,13 @@ #include <asm/voyager.h>
static inline void do_timer_interrupt_hook(void)
{
+ struct pt_regs *regs = get_irq_regs();
do_timer(1);
#ifndef CONFIG_SMP
- update_process_times(user_mode_vm(irq_regs));
+ update_process_times(user_mode_vm(regs));
#endif
- voyager_timer_interrupt();
+ voyager_timer_interrupt(regs);
}
static inline int do_timer_overflow(int count)
diff --git a/include/asm-i386/voyager.h b/include/asm-i386/voyager.h
index e74c54a..fad31ca 100644
--- a/include/asm-i386/voyager.h
+++ b/include/asm-i386/voyager.h
@@ -505,7 +505,7 @@ extern int voyager_memory_detect(int reg
extern void voyager_smp_intr_init(void);
extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
extern void voyager_smp_dump(void);
-extern void voyager_timer_interrupt(void);
+extern void voyager_timer_interrupt(struct pt_regs *);
extern void smp_local_timer_interrupt(void);
extern void voyager_power_off(void);
extern void smp_voyager_power_off(void *dummy);
Adrian Bunk <[email protected]> writes:
> On Thu, Oct 05, 2006 at 09:31:16PM -0700, Alex Romosan wrote:
>> Linus Torvalds <[email protected]> writes:
>>
>> > so please give it a good testing, and let's see if there are any
>> > regressions.
>>
>> it breaks suspend when the airo module is loaded:
>>
>> kernel: Stopping tasks: =================================================================================
>> kernel: stopping tasks timed out after 20 seconds (1 tasks remaining):
>> kernel: eth1
>> kernel: Restarting tasks...<6> Strange, eth1 not stopped
>>
>> if i remove the airo module suspend works normally (this is on a
>> thinkpad t40).
>
> Thanks for your report.
>
> Let's try to figure out what broke it.
>
> As a first step, please replace drivers/net/wireless/airo.c with the
> version in 2.6.18 and check whether this fixes the issue (you can ignore
> the deprecated warning during compilation).
i replaced airo.c with the 2.6.18 version. the good news is i can
suspend to memory with it. the bad news is dhcp never got an ip
address (so i don't think the 2.6.18 driver really works with the
2.6.19-rc1 infrastructure). any patches i could try? thanks.
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mind, it will be possible (simultaneously with |
| automatism and other passive states) to systematize confusion |
| and thus to help to discredit completely the world of reality. |
On Fri, 2006-10-06 at 19:33 -0700, Linus Torvalds wrote:
> Gaah. That voyager timer handling is a bit confusing.
>
> Maybe something like this would fix it?
>
> Untested. Need James or the other alledged voyager-owner to actually test
> or do somethign better..
There are other alleged voyager owners ... see, I keep telling you its a
popular architecture ...
I'll take a look ... I think I can probably eliminate the regs usage
from the VIC code as well.
James
On Fri, Oct 06, 2006 at 01:05:14PM -0600, Eric W. Biederman wrote:
> That code if it gets -ENOSYS reads /proc/sys/kernel/version,
> and it has worked this way since the day it was written.
What happens if /proc is not mounted (e.g. in a chrooted environment)?
Gabor
--
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------
On Fri, 2006-10-06 at 20:47 +0200, Adrian Bunk wrote:
> On Thu, Oct 05, 2006 at 09:31:16PM -0700, Alex Romosan wrote:
> > it breaks suspend when the airo module is loaded:
> >
> > kernel: Stopping tasks: =================================================================================
> > kernel: stopping tasks timed out after 20 seconds (1 tasks remaining):
> > kernel: eth1
> > kernel: Restarting tasks...<6> Strange, eth1 not stopped
> >
> > if i remove the airo module suspend works normally (this is on a
> > thinkpad t40).
>
> Thanks for your report.
>
> Let's try to figure out what broke it.
I believe it was broken by:
http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5
I have seen this in the -mm tree, but didn't follow up at the time. I
was able to fix it with the following patch. I don't know if it's the
best fix, but it seems to follow the same logic as the original code.
The airo driver used to break out of while loop if there were any signals
pending. Since it no longer checks for signals, it at least needs to check
if it needs to be frozen.
Signed-off-by: Dave Kleikamp <[email protected]>
diff -Nurp linux-2.6.19-rc1/drivers/net/wireless/airo.c linux/drivers/net/wireless/airo.c
--- linux-2.6.19-rc1/drivers/net/wireless/airo.c 2006-10-05 07:22:39.000000000 -0500
+++ linux/drivers/net/wireless/airo.c 2006-10-07 13:42:13.000000000 -0500
@@ -3090,7 +3090,8 @@ static int airo_thread(void *data) {
set_bit(JOB_AUTOWEP, &ai->jobs);
break;
}
- if (!kthread_should_stop()) {
+ if (!kthread_should_stop() &&
+ !freezing(current)) {
unsigned long wake_at;
if (!ai->expires || !ai->scan_timeout) {
wake_at = max(ai->expires,
@@ -3102,7 +3103,8 @@ static int airo_thread(void *data) {
schedule_timeout(wake_at - jiffies);
continue;
}
- } else if (!kthread_should_stop()) {
+ } else if (!kthread_should_stop() &&
+ !freezing(current)) {
schedule();
continue;
}
--
David Kleikamp
IBM Linux Technology Center
Dave Kleikamp <[email protected]> writes:
> I believe it was broken by:
> http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5
>
> I have seen this in the -mm tree, but didn't follow up at the time. I
> was able to fix it with the following patch. I don't know if it's the
> best fix, but it seems to follow the same logic as the original code.
>
>
> The airo driver used to break out of while loop if there were any signals
> pending. Since it no longer checks for signals, it at least needs to check
> if it needs to be frozen.
>
> Signed-off-by: Dave Kleikamp <[email protected]>
>
> diff -Nurp linux-2.6.19-rc1/drivers/net/wireless/airo.c linux/drivers/net/wireless/airo.c
> --- linux-2.6.19-rc1/drivers/net/wireless/airo.c 2006-10-05 07:22:39.000000000 -0500
> +++ linux/drivers/net/wireless/airo.c 2006-10-07 13:42:13.000000000 -0500
> @@ -3090,7 +3090,8 @@ static int airo_thread(void *data) {
> set_bit(JOB_AUTOWEP, &ai->jobs);
> break;
> }
> - if (!kthread_should_stop()) {
> + if (!kthread_should_stop() &&
> + !freezing(current)) {
> unsigned long wake_at;
> if (!ai->expires || !ai->scan_timeout) {
> wake_at = max(ai->expires,
> @@ -3102,7 +3103,8 @@ static int airo_thread(void *data) {
> schedule_timeout(wake_at - jiffies);
> continue;
> }
> - } else if (!kthread_should_stop()) {
> + } else if (!kthread_should_stop() &&
> + !freezing(current)) {
> schedule();
> continue;
> }
>
thanks. with this patch applied i can suspend to ram with the airo
module loaded.
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mind, it will be possible (simultaneously with |
| automatism and other passive states) to systematize confusion |
| and thus to help to discredit completely the world of reality. |
Gabor Gombas <[email protected]> writes:
> On Fri, Oct 06, 2006 at 01:05:14PM -0600, Eric W. Biederman wrote:
>
>> That code if it gets -ENOSYS reads /proc/sys/kernel/version,
>> and it has worked this way since the day it was written.
>
> What happens if /proc is not mounted (e.g. in a chrooted environment)?
glibc decides we aren't a SMP system so it's mutex locks don't
busy wait, and go to sleep immediately.
Eric
Hi!
> > > it breaks suspend when the airo module is loaded:
> > >
> > > kernel: Stopping tasks: =================================================================================
> > > kernel: stopping tasks timed out after 20 seconds (1 tasks remaining):
> > > kernel: eth1
> > > kernel: Restarting tasks...<6> Strange, eth1 not stopped
> > >
> > > if i remove the airo module suspend works normally (this is on a
> > > thinkpad t40).
> >
> > Thanks for your report.
> >
> > Let's try to figure out what broke it.
>
> I believe it was broken by:
> http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5
>
> I have seen this in the -mm tree, but didn't follow up at the time. I
> was able to fix it with the following patch. I don't know if it's the
> best fix, but it seems to follow the same logic as the original code.
>
>
> The airo driver used to break out of while loop if there were any signals
> pending. Since it no longer checks for signals, it at least needs to check
> if it needs to be frozen.
>
> Signed-off-by: Dave Kleikamp <[email protected]>
ACK. Please push it to akpm or airo maintainers...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Thu, Oct 05, Olaf Hering wrote:
> If my monitor is off during boot and I turn it on once KDE is fully
> started, the screen remains black. If it stays on during boot, X will
> work ok. This happens on a G5 with ' nVidia Corporation NV43 [GeForce 6600] (rev a2)'
> The i2c errors are new.
I dont know how Xorg gets the EDID data. There is no difference in dmesg
output with monitor on/off. But the Xorg.0.log shows:
@@ -772,49 +772,13 @@
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
-(--) NV(0): DDC detected a CRT:
-(II) NV(0): Manufacturer: ACT Model: f1b Serial#: 8016154
-(II) NV(0): Year: 1998 Week: 9
-(II) NV(0): EDID Version: 1.0
-(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
-(II) NV(0): Sync: Separate Composite
-(II) NV(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
-(II) NV(0): Gamma: 2.00
-(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
-(II) NV(0): redX: 0.625 redY: 0.339 greenX: 0.301 greenY: 0.599
-(II) NV(0): blueX: 0.141 blueY: 0.065 whiteX: 0.281 whiteY: 0.310
-(II) NV(0): Supported VESA Video Modes:
-(II) NV(0): 720x400@70Hz
-(II) NV(0): 640x480@60Hz
-(II) NV(0): 640x480@75Hz
-(II) NV(0): 800x600@60Hz
-(II) NV(0): 800x600@75Hz
-(II) NV(0): 1024x768@60Hz
-(II) NV(0): 1024x768@70Hz
-(II) NV(0): 1024x768@75Hz
-(II) NV(0): Manufacturer's mask: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 36.0 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 640 h_sync: 696 h_sync_end 752 h_blank_end 832 h_border: 0
-(II) NV(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 509 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 56.2 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
-(II) NV(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 94.5 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
-(II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 108.0 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
-(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
+(II) NV(0): ... none found
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
-(II) NV(0): Monitor[0]: Using default hsync range of 43.26-68.68 kHz
-(II) NV(0): Monitor[0]: Using default vrefresh range of 60.01-85.06 Hz
+(II) NV(0): Monitor[0]: Using default hsync range of 28.00-33.00 kHz
+(II) NV(0): Monitor[0]: Using default vrefresh range of 43.00-72.00 Hz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (hsync out of range)
(II) NV(0): Not using default mode "320x175" (hsync out of range)
The root cause may be that Xorg nv can not handle 640x480@xx at all on this card,
or this monitor. It works ok in OSX.
Also turning the monitor off while in yaboot doesnt help.
tree -f /sys shows also no difference.
Linus Torvalds <[email protected]> writes:
> so please give it a good testing, and let's see if there are any
> regressions.
If I run this one-liner script:
while true ; do echo -n . ; mount p4:/home /p4home -ohard,intr & mount p4:/extra /p4extra -ohard,intr ; umount /p4home ; umount /p4extra ; done
I get a BUG after a few iterations, see below. If I replace the '&' with
a ';' so the mounts happen one at a time, it works as expected.
The NFS server runs kernel 2.6.17.11.
------------[ cut here ]------------
kernel BUG at fs/nfs/client.c:352!
invalid opcode: 0000 [#1]
PREEMPT
Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore
CPU: 0
EIP: 0060:[<e0c836b5>] Not tainted VLI
EFLAGS: 00010202 (2.6.19-rc1 #53)
EIP is at nfs_create_server+0x9f1/0xa6e [nfs]
eax: 00000000 ebx: d5e11b40 ecx: ca01a000 edx: 00000000
esi: 00000001 edi: ca01bdac ebp: ca01bd08 esp: ca01bbf8
ds: 007b es: 007b ss: 0068
Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)
Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030
ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c
c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0
Call Trace:
[<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs]
[<c0166416>] vfs_kern_mount+0x42/0x8c
[<c01664c4>] do_kern_mount+0x3b/0x4e
[<c017a8ca>] do_mount+0x25a/0x6a5
[<c017adaa>] sys_mount+0x95/0xd4
[<c01030c1>] sysenter_past_esp+0x56/0x8d
[<b7fa9410>] 0xb7fa9410
=======================
Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86
EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8
--
Peter Osterlund - [email protected]
http://web.telia.com/~u89404340
Peter Osterlund <[email protected]> writes:
> Linus Torvalds <[email protected]> writes:
>
> > so please give it a good testing, and let's see if there are any
> > regressions.
>
> If I run this one-liner script:
>
> while true ; do echo -n . ; mount p4:/home /p4home -ohard,intr & mount p4:/extra /p4extra -ohard,intr ; umount /p4home ; umount /p4extra ; done
>
> I get a BUG after a few iterations, see below. If I replace the '&' with
> a ';' so the mounts happen one at a time, it works as expected.
>
> The NFS server runs kernel 2.6.17.11.
>
> ------------[ cut here ]------------
> kernel BUG at fs/nfs/client.c:352!
> invalid opcode: 0000 [#1]
> PREEMPT
> Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore
> CPU: 0
> EIP: 0060:[<e0c836b5>] Not tainted VLI
> EFLAGS: 00010202 (2.6.19-rc1 #53)
> EIP is at nfs_create_server+0x9f1/0xa6e [nfs]
> eax: 00000000 ebx: d5e11b40 ecx: ca01a000 edx: 00000000
> esi: 00000001 edi: ca01bdac ebp: ca01bd08 esp: ca01bbf8
> ds: 007b es: 007b ss: 0068
> Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)
> Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030
> ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c
> c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0
> Call Trace:
> [<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs]
> [<c0166416>] vfs_kern_mount+0x42/0x8c
> [<c01664c4>] do_kern_mount+0x3b/0x4e
> [<c017a8ca>] do_mount+0x25a/0x6a5
> [<c017adaa>] sys_mount+0x95/0xd4
> [<c01030c1>] sysenter_past_esp+0x56/0x8d
> [<b7fa9410>] 0xb7fa9410
> =======================
> Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86
> EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8
According to "git bisect", this is the bad commit:
commit 54ceac4515986030c2502960be620198dd8fe25b
Author: David Howells <[email protected]>
Date: Tue Aug 22 20:06:13 2006 -0400
NFS: Share NFS superblocks per-protocol per-server per-FSID
The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.
--
Peter Osterlund - [email protected]
http://web.telia.com/~u89404340
On Sun, 2006-10-08 at 17:19 +0200, Peter Osterlund wrote:
> > ------------[ cut here ]------------
> > kernel BUG at fs/nfs/client.c:352!
> > invalid opcode: 0000 [#1]
> > PREEMPT
> > Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore
> > CPU: 0
> > EIP: 0060:[<e0c836b5>] Not tainted VLI
> > EFLAGS: 00010202 (2.6.19-rc1 #53)
> > EIP is at nfs_create_server+0x9f1/0xa6e [nfs]
> > eax: 00000000 ebx: d5e11b40 ecx: ca01a000 edx: 00000000
> > esi: 00000001 edi: ca01bdac ebp: ca01bd08 esp: ca01bbf8
> > ds: 007b es: 007b ss: 0068
> > Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)
> > Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030
> > ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c
> > c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0
> > Call Trace:
> > [<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs]
> > [<c0166416>] vfs_kern_mount+0x42/0x8c
> > [<c01664c4>] do_kern_mount+0x3b/0x4e
> > [<c017a8ca>] do_mount+0x25a/0x6a5
> > [<c017adaa>] sys_mount+0x95/0xd4
> > [<c01030c1>] sysenter_past_esp+0x56/0x8d
> > [<b7fa9410>] 0xb7fa9410
> > =======================
> > Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86
> > EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8
Does the following patch fix it?
Cheers,
Trond
Trond Myklebust <[email protected]> writes:
> On Sun, 2006-10-08 at 17:19 +0200, Peter Osterlund wrote:
> > > kernel BUG at fs/nfs/client.c:352!
>
> Does the following patch fix it?
Yes it does. Thanks!
--
Peter Osterlund - [email protected]
http://web.telia.com/~u89404340
On Sun, 2006-10-08 at 20:54 +0200, Peter Osterlund wrote:
> Trond Myklebust <[email protected]> writes:
>
> > On Sun, 2006-10-08 at 17:19 +0200, Peter Osterlund wrote:
> > > > kernel BUG at fs/nfs/client.c:352!
> >
> > Does the following patch fix it?
>
> Yes it does. Thanks!
Hmm... There would appear to be another bug there. After breaking out of
the loop, the task state is left as TASK_INTERRUPTIBLE. Let's just
replace the whole thing with a wait_on_event_interruptible.
Cheers,
Trond
The DVB frontend selection changes in 2.6.19-rc1 are giving me the
following compile error:
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference to `tda10086_attach'
saa7134-dvb.c:(.text+0x91db0): undefined reference to `tda826x_attach'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
.config attached.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Adrian Bunk wrote:
> The DVB frontend selection changes in 2.6.19-rc1 are giving me the
> following compile error:
>
> <-- snip -->
>
> ...
> LD .tmp_vmlinux1
> drivers/built-in.o: In function `dvb_init':
> saa7134-dvb.c:(.text+0x91d94): undefined reference to `tda10086_attach'
> saa7134-dvb.c:(.text+0x91db0): undefined reference to `tda826x_attach'
> make: *** [.tmp_vmlinux1] Error 1
>
> <-- snip -->
>
> .config attached.
>
> cu
> Adrian
Adrian,
Does this fix it for you?
Signed-off-by: Michael Krufky <[email protected]>
diff -r 7efa405e2d66 linux/drivers/media/dvb/frontends/tda10086.h
--- a/drivers/media/dvb/frontends/tda10086.h Fri Oct 06 17:12:00 2006 -0300
+++ b/drivers/media/dvb/frontends/tda10086.h Mon Oct 09 03:43:28 2006 -0400
@@ -35,7 +35,16 @@ struct tda10086_config
u8 invert;
};
+#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TDA10086
#endif // TDA10086_H
diff -r 7efa405e2d66 linux/drivers/media/dvb/frontends/tda826x.h
--- a/drivers/media/dvb/frontends/tda826x.h Fri Oct 06 17:12:00 2006 -0300
+++ b/drivers/media/dvb/frontends/tda826x.h Mon Oct 09 03:43:28 2006 -0400
@@ -35,6 +35,19 @@
* @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
* @return FE pointer on success, NULL on failure.
*/
-extern struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough);
+#if defined(CONFIG_DVB_TDA826X) || defined(CONFIG_DVB_TDA826X_MODULE)
+extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,
+ struct i2c_adapter *i2c,
+ int has_loopthrough);
+#else
+static inline struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe,
+ int addr,
+ struct i2c_adapter *i2c,
+ int has_loopthrough)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TDA826X
-#endif
+#endif // __DVB_TDA826X_H__
On Mon, Oct 09, 2006 at 03:53:00AM -0400, Michael Krufky wrote:
> Adrian Bunk wrote:
> > The DVB frontend selection changes in 2.6.19-rc1 are giving me the
> > following compile error:
> >
> > <-- snip -->
> >
> > ...
> > LD .tmp_vmlinux1
> > drivers/built-in.o: In function `dvb_init':
> > saa7134-dvb.c:(.text+0x91d94): undefined reference to `tda10086_attach'
> > saa7134-dvb.c:(.text+0x91db0): undefined reference to `tda826x_attach'
> > make: *** [.tmp_vmlinux1] Error 1
> >
> > <-- snip -->
> >
> > .config attached.
> >
> > cu
> > Adrian
>
>
> Adrian,
Hi Michael,
> Does this fix it for you?
it does fix it with my .config, but
> Signed-off-by: Michael Krufky <[email protected]>
>
> diff -r 7efa405e2d66 linux/drivers/media/dvb/frontends/tda10086.h
> --- a/drivers/media/dvb/frontends/tda10086.h Fri Oct 06 17:12:00 2006 -0300
> +++ b/drivers/media/dvb/frontends/tda10086.h Mon Oct 09 03:43:28 2006 -0400
> @@ -35,7 +35,16 @@ struct tda10086_config
> u8 invert;
> };
>
> +#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
> extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
> struct i2c_adapter* i2c);
> +#else
> +static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
> + struct i2c_adapter* i2c)
> +{
> + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
> + return NULL;
> +}
> +#endif // CONFIG_DVB_TDA10086
>...
this breaks with CONFIG_VIDEO_SAA7134_DVB=y, CONFIG_DVB_TDA1004X=m.
#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
might work, but the whole manual frontend selection IMHO looks a bit
fragile.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Adrian Bunk wrote:
> On Mon, Oct 09, 2006 at 03:53:00AM -0400, Michael Krufky wrote:
>> Adrian Bunk wrote:
>>> The DVB frontend selection changes in 2.6.19-rc1 are giving me the
>>> following compile error:
>>>
>>> <-- snip -->
>>>
>>> ...
>>> LD .tmp_vmlinux1
>>> drivers/built-in.o: In function `dvb_init':
>>> saa7134-dvb.c:(.text+0x91d94): undefined reference to `tda10086_attach'
>>> saa7134-dvb.c:(.text+0x91db0): undefined reference to `tda826x_attach'
>>> make: *** [.tmp_vmlinux1] Error 1
>>>
>>> <-- snip -->
>>>
>>> .config attached.
>>>
>>> cu
>>> Adrian
>>
>> Adrian,
>
> Hi Michael,
>
>> Does this fix it for you?
>
> it does fix it with my .config, but
>
>> Signed-off-by: Michael Krufky <[email protected]>
>>
>> diff -r 7efa405e2d66 linux/drivers/media/dvb/frontends/tda10086.h
>> --- a/drivers/media/dvb/frontends/tda10086.h Fri Oct 06 17:12:00 2006 -0300
>> +++ b/drivers/media/dvb/frontends/tda10086.h Mon Oct 09 03:43:28 2006 -0400
>> @@ -35,7 +35,16 @@ struct tda10086_config
>> u8 invert;
>> };
>>
>> +#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
>> extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
>> struct i2c_adapter* i2c);
>> +#else
>> +static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
>> + struct i2c_adapter* i2c)
>> +{
>> + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
>> + return NULL;
>> +}
>> +#endif // CONFIG_DVB_TDA10086
>> ...
>
> this breaks with CONFIG_VIDEO_SAA7134_DVB=y, CONFIG_DVB_TDA1004X=m.
>
> #if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
> might work, but the whole manual frontend selection IMHO looks a bit
> fragile.
>
> cu
> Adrian
>
That's never going to work -- If the card driver is build as y, then the frontend must also be built y...
Andrew, we need some Kconfig logic to prevent that case described by Adrian, above.
-Mike
I have an AMD K8 system and I'm unable to get cpufreq working with 2.6.19-rc1.
The cpufreq sysfs directory is missing under /sys/devices/system/cpu/cpu0/.
2.6.18 works as expected.
I've also noticed an infiniband related problem. I have to disable Infiniband
in the config to get the kernel to compile. Can't say more since I'm not
using any Infinband stuff and therefore don't need it anyway.
I can say that 2.6.19-rc1 is very stable here. Much more than any rc that I've
seen before. And it seems to have solved the sluggish performance on high I/O
load too.
user@ubuntu:~$ lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio
Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:08.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller
(rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0391 (rev
a1)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc1
# Mon Oct 9 22:39:22 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_UTS_NS=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TASK_XACCT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MULTITHREAD_PROBE=y
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_ROUTE_FWMARK is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_NETLABEL is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=y
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
CONFIG_IBM_ASM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not set
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_OSS_OBSOLETE_DRIVER is not set
CONFIG_SOUND_BT878=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_CS4232=m
# CONFIG_SOUND_SSCAPE is not set
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set
CONFIG_SOUND_TVMIXER=m
CONFIG_SOUND_KAHLUA=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
CONFIG_USB_TRANCEVIBRATOR=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
CONFIG_GENERIC_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_FS=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_LKDTM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
> I have an AMD K8 system and I'm unable to get cpufreq working
> with 2.6.19-rc1.
> The cpufreq sysfs directory is missing under
> /sys/devices/system/cpu/cpu0/.
> 2.6.18 works as expected.
What error message are you getting from `dmesg | grep power` ?
I didn't make any changes to powernow-k8 for 2.6.19 so I'm
surprised you found a regression.
-Mark Langsdorf
AMD, Inc.
Am Dienstag, 10. Oktober 2006 16:59 schrieb Langsdorf, Mark:
> > I have an AMD K8 system and I'm unable to get cpufreq working
> > with 2.6.19-rc1.
> > The cpufreq sysfs directory is missing under
> > /sys/devices/system/cpu/cpu0/.
> > 2.6.18 works as expected.
>
> What error message are you getting from `dmesg | grep power` ?
dmesg | grep power
[ 17.852383] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor
3800+ processors (version 2.00.00)
[ 17.852403] powernow-k8: MP systems not supported by PSB BIOS structure
[ 17.852428] powernow-k8: MP systems not supported by PSB BIOS structure
Haven't seen this before.
-Christian
> Am Dienstag, 10. Oktober 2006 16:59 schrieb Langsdorf, Mark:
> > > I have an AMD K8 system and I'm unable to get cpufreq working
> > > with 2.6.19-rc1.
> > > The cpufreq sysfs directory is missing under
> > > /sys/devices/system/cpu/cpu0/.
> > > 2.6.18 works as expected.
> >
> > What error message are you getting from `dmesg | grep power` ?
>
> dmesg | grep power
> [ 17.852383] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual
> Core Processor
> 3800+ processors (version 2.00.00)
> [ 17.852403] powernow-k8: MP systems not supported by PSB
> BIOS structure
> [ 17.852428] powernow-k8: MP systems not supported by PSB
> BIOS structure
>
> Haven't seen this before.
I thought I cleaned that message out in v2.0.
The BIOS failed to supply _PSS objects that Linux could
recognize. The powernow-k8 driver tried to use a PSB
table, but MP/dual-core systems can't use PSB tables.
The driver errored out.
If you can get it to work with 2.6.18 and it doesn't work
with 2.6.19-rc1, the most likely culprit is a change in the
ACPI subsystem.
Can you get decompiled dumps of the DSDT? See the ACPI
pages on sourceforge if you need instructions.
-Mark Langsdorf
AMD, Inc.
On Tue, Oct 10, 2006 at 02:18:26PM +0200, Christian wrote:
>...
> I've also noticed an infiniband related problem. I have to disable Infiniband
> in the config to get the kernel to compile. Can't say more since I'm not
> using any Infinband stuff and therefore don't need it anyway.
>...
Please send the .config for this bug.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Am Mittwoch, 11. Oktober 2006 06:23 schrieb Adrian Bunk:
> On Tue, Oct 10, 2006 at 02:18:26PM +0200, Christian wrote:
> >...
> > I've also noticed an infiniband related problem. I have to disable
> > Infiniband in the config to get the kernel to compile. Can't say more
> > since I'm not using any Infinband stuff and therefore don't need it
> > anyway.
> >...
>
> Please send the .config for this bug.
>
> cu
> Adrian
This is the build error:
Kernel: arch/x86_64/boot/bzImage is ready (#5)
MODPOST 1602 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "to_qp_state_str" [drivers/infiniband/hw/amso1100/iw_c2.ko]
undefined!
WARNING: "to_event_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined!
make[1]: *** [__modpost] Fehler 1
make: *** [modules] Fehler 2
And here the .config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc1
# Wed Oct 11 11:07:36 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_UTS_NS=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TASK_XACCT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_SLEEP_PROC_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MULTITHREAD_PROBE=y
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_ROUTE_FWMARK is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_NETLABEL is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=y
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
CONFIG_IBM_ASM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not set
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_OSS_OBSOLETE_DRIVER is not set
CONFIG_SOUND_BT878=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_CS4232=m
# CONFIG_SOUND_SSCAPE is not set
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set
CONFIG_SOUND_TVMIXER=m
CONFIG_SOUND_KAHLUA=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
CONFIG_USB_TRANCEVIBRATOR=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m
CONFIG_GENERIC_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_FS=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_LKDTM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
It seems that my first try exceeded the LKML size limit. So hopefully you
should get my decompiled DSDT now as a bzip compressed file.
-Christian
On Wed, Oct 11, 2006 at 11:30:01AM +0200, Christian wrote:
> Am Mittwoch, 11. Oktober 2006 06:23 schrieb Adrian Bunk:
> > On Tue, Oct 10, 2006 at 02:18:26PM +0200, Christian wrote:
> > >...
> > > I've also noticed an infiniband related problem. I have to disable
> > > Infiniband in the config to get the kernel to compile. Can't say more
> > > since I'm not using any Infinband stuff and therefore don't need it
> > > anyway.
> > >...
> >
> > Please send the .config for this bug.
> >
> > cu
> > Adrian
>
> This is the build error:
>
> Kernel: arch/x86_64/boot/bzImage is ready (#5)
> MODPOST 1602 modules
> WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
> WARNING: "to_qp_state_str" [drivers/infiniband/hw/amso1100/iw_c2.ko]
> undefined!
> WARNING: "to_event_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined!
> make[1]: *** [__modpost] Fehler 1
> make: *** [modules] Fehler 2
>...
Thanks.
This was a known bug that was fixed in Linus' tree yesterday.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
> It seems that my first try exceeded the LKML size limit. So
> hopefully you should get my decompiled DSDT now as a bzip
> compressed file.
Right then. You're completely missing the _PCT, _PPC, and
_PSS packages, as well as the CPU scope they're normally
defined in. powernow-k8 is not going to work on this system.
If you boot with the 2.6.18 kernel, do you get the same
decompiled DSDT? If not, there's an ACPI regression you
need to report to Len Brown.
Have you upgraded the processors or BIOS on the box?
-Mark Langsdorf
AMD, Inc.
Am Mittwoch, 11. Oktober 2006 19:33 schrieb Langsdorf, Mark:
> > It seems that my first try exceeded the LKML size limit. So
> > hopefully you should get my decompiled DSDT now as a bzip
> > compressed file.
>
> Right then. You're completely missing the _PCT, _PPC, and
> _PSS packages, as well as the CPU scope they're normally
> defined in. powernow-k8 is not going to work on this system.
user@ubuntu:~$ uname -a
Linux ubuntu.localnet 2.6.18-rc7 #2 SMP Wed Sep 13 11:28:41 CEST 2006 x86_64
GNU/Linux
user@ubuntu:~$ dmesg | grep power
[ 402.879894] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor
3800+ processors (version 2.00.00)
[ 402.880409] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
[ 402.880412] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 402.880415] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 402.881299] powernow-k8: ph2 null fid transition 0xc
2.6.18-rc7 powerfreq works nice. Double checked it!
The decompiled DSDT is apparently the same on both kernels, except the
filename in the dump. Maybe it's my fault. I've attached the binary DSDT dump
of 2.6.18-rc7.
> If you boot with the 2.6.18 kernel, do you get the same
> decompiled DSDT? If not, there's an ACPI regression you
> need to report to Len Brown.
>
> Have you upgraded the processors or BIOS on the box?
No.
-Christian
On Wed, Oct 11, 2006 at 08:16:32PM +0200, Christian wrote:
> Am Mittwoch, 11. Oktober 2006 19:33 schrieb Langsdorf, Mark:
> > > It seems that my first try exceeded the LKML size limit. So
> > > hopefully you should get my decompiled DSDT now as a bzip
> > > compressed file.
> >
> > Right then. You're completely missing the _PCT, _PPC, and
> > _PSS packages, as well as the CPU scope they're normally
> > defined in. powernow-k8 is not going to work on this system.
>
> user@ubuntu:~$ uname -a
> Linux ubuntu.localnet 2.6.18-rc7 #2 SMP Wed Sep 13 11:28:41 CEST 2006 x86_64
> GNU/Linux
> user@ubuntu:~$ dmesg | grep power
> [ 402.879894] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor
> 3800+ processors (version 2.00.00)
> [ 402.880409] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
> [ 402.880412] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
> [ 402.880415] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
> [ 402.881299] powernow-k8: ph2 null fid transition 0xc
>
> 2.6.18-rc7 powerfreq works nice. Double checked it!
There are strange woes with cpufreq in current kernel. During
2.6.18-rc cpufreq-nforce2 was broken, then fixed (acpi-cpufreq was
failing to propagate registration error) then broken again. It still
doesn't work in 19-rc1.
--
Tomasz Torcz Only gods can safely risk perfection,
[email protected] it's a dangerous thing for a man. -- Alia
On Mon, 09 Oct 2006 04:27:26 -0400 Michael Krufky wrote:
> Adrian Bunk wrote:
> > On Mon, Oct 09, 2006 at 03:53:00AM -0400, Michael Krufky wrote:
> >> Adrian Bunk wrote:
> >>> The DVB frontend selection changes in 2.6.19-rc1 are giving me the
> >>> following compile error:
> >>>
> >>> <-- snip -->
> >>>
> >>> ...
> >>> LD .tmp_vmlinux1
> >>> drivers/built-in.o: In function `dvb_init':
> >>> saa7134-dvb.c:(.text+0x91d94): undefined reference to `tda10086_attach'
> >>> saa7134-dvb.c:(.text+0x91db0): undefined reference to `tda826x_attach'
> >>> make: *** [.tmp_vmlinux1] Error 1
> >>>
> >>> <-- snip -->
> >>>
> >>> .config attached.
> >>>
> >>> cu
> >>> Adrian
> >>
> >> Adrian,
> >
> > Hi Michael,
> >
> >> Does this fix it for you?
> >
> > it does fix it with my .config, but
> >
> >> Signed-off-by: Michael Krufky <[email protected]>
> >>
> >> diff -r 7efa405e2d66 linux/drivers/media/dvb/frontends/tda10086.h
> >> --- a/drivers/media/dvb/frontends/tda10086.h Fri Oct 06 17:12:00 2006 -0300
> >> +++ b/drivers/media/dvb/frontends/tda10086.h Mon Oct 09 03:43:28 2006 -0400
> >> @@ -35,7 +35,16 @@ struct tda10086_config
> >> u8 invert;
> >> };
> >>
> >> +#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
> >> extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
> >> struct i2c_adapter* i2c);
> >> +#else
> >> +static inline struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
> >> + struct i2c_adapter* i2c)
> >> +{
> >> + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
> >> + return NULL;
> >> +}
> >> +#endif // CONFIG_DVB_TDA10086
> >> ...
> >
> > this breaks with CONFIG_VIDEO_SAA7134_DVB=y, CONFIG_DVB_TDA1004X=m.
> >
> > #if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
> > might work, but the whole manual frontend selection IMHO looks a bit
> > fragile.
> >
> > cu
> > Adrian
> >
>
> That's never going to work -- If the card driver is build as y, then the frontend must also be built y...
Where is the connection between the card driver and the frontend(s)?
Is it in card driver source files or frontend source files
or in Kconfig files? I looked but didn't see it (in Kconfig).
> Andrew, we need some Kconfig logic to prevent that case described by Adrian, above.
There seems to be a good bit on dependence between the Multimedia devices
menu and DVB/frontends menus.. without having much Kconfig language
dependence info there. Maybe I'm wrong. I hope so.
---
~Randy
On Fri, 13 Oct 2006, Randy Dunlap wrote:
> On Mon, 09 Oct 2006 04:27:26 -0400 Michael Krufky wrote:
> > Adrian Bunk wrote:
> > >> +#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
> > >
> > > this breaks with CONFIG_VIDEO_SAA7134_DVB=y, CONFIG_DVB_TDA1004X=m.
> > >
> > > #if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
I'd do this ^^^.
> > > might work, but the whole manual frontend selection IMHO looks a bit
> > > fragile.
> > >
> >
> > That's never going to work -- If the card driver is build as y, then the frontend must also be built y...
The frontend must only be built as 'y' if it the card driver (built as 'y')
wants to use it. There is no reason you couldn't compile a card driver
into the kernel, and set one of the supported front-ends to be a module, so
that a different card driver, compiled as a module, could use it. For
instance, use 'y' for all built-in hardware and then 'm' for hot-pluggable
USB devices and their front-ends.
> Where is the connection between the card driver and the frontend(s)?
> Is it in card driver source files or frontend source files
> or in Kconfig files? I looked but didn't see it (in Kconfig).
It's in the card driver source files. They call (only) a xxxx_attach()
function to get the frontend. The Kconfig entry for a card driver has
'select' lines for all the front-ends it can use, when DVB_FE_CUSTOMISE is
turned off. When DVB_FE_CUSTOMISE is on, the user must turn on the
front-ends they want.