2006-11-19 20:30:18

by Jay Cliburn

[permalink] [raw]
Subject: [PATCH 2/4] atl1: Header files for Attansic L1 driver

From: Jay Cliburn <[email protected]>

This patch contains the header files needed by the Attansic L1 gigabit
ethernet adapter driver.

Signed-off-by: Jay Cliburn <[email protected]>
---

atl1.h | 251 ++++++++++++++
atl1_hw.h | 991
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
atl1_osdep.h | 78 ++++
3 files changed, 1320 insertions(+)

diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
new file mode 100644
index 0000000..95a5fa1
--- /dev/null
+++ b/drivers/net/atl1/atl1.h
@@ -0,0 +1,251 @@
+/** atl1.h - atl1 main header
+
+Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+Copyright(c) 2006 Chris Snook <[email protected]>
+Copyright(c) 2006 Jay Cliburn <[email protected]>
+
+Derived from Intel e1000 driver
+Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 of the License, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 59
+Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#ifndef _ATL1_H_
+#define _ATL1_H_
+
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/spinlock_types.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+#include "atl1_hw.h"
+
+#ifdef NETIF_F_TSO
+#include <net/checksum.h>
+#endif
+
+#ifdef SIOCGMIIPHY
+#include <linux/mii.h>
+#endif
+
+#ifdef SIOCETHTOOL
+#include <linux/ethtool.h>
+#endif
+
+#ifdef NETIF_F_HW_VLAN_TX
+#include <linux/if_vlan.h>
+#endif
+
+#define BAR_0 0
+
+#define LBYTESWAP( a ) ( ( ( (a) & 0x00ff00ff ) << 8 ) | ( ( (a) & 0xff00ff00 ) >> 8 ) )
+#define LONGSWAP( a ) ( ( LBYTESWAP( a ) << 16 ) | ( LBYTESWAP( a ) >> 16 ) )
+#define SHORTSWAP( a ) ( ( (a) << 8 ) | ( (a) >> 8 ) )
+
+struct at_adapter;
+
+#define AT_MAX_INTR 3
+
+#define AT_DEFAULT_TPD 256
+#define AT_MAX_TPD 1023
+#define AT_MIN_TPD 64
+#define AT_DEFAULT_RFD 512
+#define AT_MIN_RFD 128
+#define AT_MAX_RFD 2047
+
+#define AT_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define AT_DESC_USED(R) \
+ (((R)->next_to_clean > (R)->next_to_use) ? \
+ ((R)->count+(R)->next_to_use-(R)->next_to_clean+1) : \
+ ((R)->next_to_use-(R)->next_to_clean+1))
+
+#define AT_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
+#define AT_RFD_DESC(R, i) AT_GET_DESC(R, i, struct rx_free_desc)
+#define AT_TPD_DESC(R, i) AT_GET_DESC(R, i, struct tx_packet_desc)
+#define AT_RRD_DESC(R, i) AT_GET_DESC(R, i, struct rx_return_desc)
+
+/** wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct at_buffer {
+ struct sk_buff *skb;
+ u16 length;
+ u16 alloced;
+ dma_addr_t dma;
+};
+
+#define MAX_TX_BUF_LEN 0x3000 /* 12KB */
+
+struct at_tpd_ring {
+ void *desc; /* pointer to the descriptor ring memory */
+ dma_addr_t dma; /* physical adress of the descriptor ring */
+ u16 size; /* length of descriptor ring in bytes */
+ u16 count; /* number of descriptors in the ring */
+
+ u16 hw_idx; /* hardware index */
+ atomic_t next_to_clean;
+ atomic_t next_to_use;
+ struct at_buffer *buffer_info;
+};
+
+struct at_rfd_ring {
+ void *desc;
+ dma_addr_t dma;
+ u16 size;
+ u16 count;
+ atomic_t next_to_use;
+ u16 next_to_clean;
+ struct at_buffer *buffer_info;
+};
+
+struct at_rrd_ring {
+ void *desc;
+ dma_addr_t dma;
+ unsigned int size;
+ u16 count;
+ u16 next_to_use;
+ atomic_t next_to_clean;
+};
+
+struct at_ring_header {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical adress of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+};
+
+struct at_cmb {
+ struct coals_msg_block *cmb;
+ dma_addr_t dma;
+};
+
+struct at_smb {
+ struct stats_msg_block *smb;
+ dma_addr_t dma;
+};
+
+/* Statistics counters */
+struct at_sft_stats {
+ u64 rx_packets;
+ u64 tx_packets;
+ u64 rx_bytes;
+ u64 tx_bytes;
+ u64 multicast;
+ u64 collisions;
+ u64 rx_errors;
+ u64 rx_length_errors;
+ u64 rx_crc_errors;
+ u64 rx_frame_errors;
+ u64 rx_fifo_errors;
+ u64 rx_missed_errors;
+ u64 tx_errors;
+ u64 tx_fifo_errors;
+ u64 tx_aborted_errors;
+ u64 tx_window_errors;
+ u64 tx_carrier_errors;
+
+ u64 tx_pause; /* The number of Pause packet transmitted. */
+ u64 excecol; /* The number of transmit packets aborted due to excessive collisions. */
+ u64 deffer; /* The number of packets transmitted that is deferred. */
+ u64 scc; /* The number of packets subsequently transmitted successfully with a single prior collision. */
+ u64 mcc; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+ u64 latecol; /* The number of packets transmitted with late collisions. */
+ u64 tx_underun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+ u64 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU, regardless if it is truncated by Selene or not.
+ * (The name is not really reflects the meaning in this case here.) */
+ u64 rx_pause; /* The number of Pause packet received. */
+ u64 rx_rrd_ov;
+ u64 rx_trunc;
+};
+
+/* board specific private data structure */
+#define AT_REGS_LEN 8
+
+struct at_adapter {
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+ struct at_sft_stats soft_stats;
+
+#ifdef NETIF_F_HW_VLAN_TX
+ struct vlan_group *vlgrp;
+#endif
+ u32 rx_buffer_len;
+ u32 wol;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ spinlock_t tx_lock;
+ atomic_t irq_sem;
+ struct work_struct tx_timeout_task;
+ struct work_struct link_chg_task;
+ struct work_struct pcie_dma_to_rst_task;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_config_timer;
+ bool phy_timer_pending;
+
+ bool mac_disabled;
+
+ /* All descriptor rings' memory */
+ struct at_ring_header ring_header;
+
+ /* TX */
+ struct at_tpd_ring tpd_ring;
+ spinlock_t mb_lock;
+
+ /* RX */
+ struct at_rfd_ring rfd_ring;
+ struct at_rrd_ring rrd_ring;
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* Interrupt Moderator timer ( 2us resolution) */
+ u16 imt;
+ /* Interrupt Clear timer (2us resolution) */
+ u16 ict;
+
+ /* structs defined in at_hw.h */
+ u32 bd_number; /* board number */
+ bool pci_using_64;
+ struct at_hw hw;
+ struct at_smb smb;
+ struct at_cmb cmb;
+
+#ifdef ETHTOOL_TEST
+ u32 test_icr;
+ struct at_ring_header test_ring_header;
+ struct at_tpd_ring test_tpd_ring;
+ struct at_rfd_ring test_rfd_ring;
+ struct at_rrd_ring test_rrd_ring;
+#endif
+ u32 pci_state[16];
+};
+
+#endif /* _ATL1_H_ */
diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h
new file mode 100644
index 0000000..0e3e2ab
--- /dev/null
+++ b/drivers/net/atl1/atl1_hw.h
@@ -0,0 +1,991 @@
+/** atl1_hw.h - atl1 hardware definitions
+
+Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+Copyright(c) 2006 Chris Snook <[email protected]>
+Copyright(c) 2006 Jay Cliburn <[email protected]>
+
+Derived from Intel e1000 driver
+Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 of the License, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 59
+Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+There are a lot of defines in here that are unused and/or have cryptic names.
+Please leave them alone, as they're the closest thing we have to a spec from
+Attansic at present. *ahem* -- CHS
+*/
+
+#ifndef _ATL1_HW_H_
+#define _ATL1_HW_H_
+
+#include "atl1_osdep.h"
+
+#define _AT_ATTRIB_PACK_ __attribute__ ((packed))
+
+struct at_adapter;
+struct at_hw;
+
+/** function prototypes */
+
+/** register definitions */
+#define REG_PCIE_CAP_LIST 0x58
+
+#define REG_VPD_CAP 0x6C
+#define VPD_CAP_ID_MASK 0xff
+#define VPD_CAP_ID_SHIFT 0
+#define VPD_CAP_NEXT_PTR_MASK 0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT 8
+#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT 16
+#define VPD_CAP_VPD_FLAG 0x80000000
+
+#define REG_VPD_DATA 0x70
+
+#define REG_SPI_FLASH_CTRL 0x200
+#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
+#define SPI_FLASH_CTRL_STS_WEN 0x2
+#define SPI_FLASH_CTRL_STS_WPEN 0x80
+#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
+#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
+#define SPI_FLASH_CTRL_INS_MASK 0x7
+#define SPI_FLASH_CTRL_INS_SHIFT 8
+#define SPI_FLASH_CTRL_START 0x800
+#define SPI_FLASH_CTRL_EN_VPD 0x2000
+#define SPI_FLASH_CTRL_LDSTART 0x8000
+#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
+#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
+#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
+#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
+#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
+#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
+#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
+#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
+#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
+#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
+#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
+
+#define REG_SPI_ADDR 0x204
+
+#define REG_SPI_DATA 0x208
+
+#define REG_SPI_FLASH_CONFIG 0x20C
+#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
+#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
+#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
+#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
+#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
+
+#define REG_SPI_FLASH_OP_PROGRAM 0x210
+#define REG_SPI_FLASH_OP_SC_ERASE 0x211
+#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
+#define REG_SPI_FLASH_OP_RDID 0x213
+#define REG_SPI_FLASH_OP_WREN 0x214
+#define REG_SPI_FLASH_OP_RDSR 0x215
+#define REG_SPI_FLASH_OP_WRSR 0x216
+#define REG_SPI_FLASH_OP_READ 0x217
+
+#define REG_TWSI_CTRL 0x218
+#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT 0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
+#define TWSI_CTRL_SW_LDSTART 0x800
+#define TWSI_CTRL_HW_LDSTART 0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
+#define TWSI_CTRL_LD_EXIST 0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
+#define TWSI_CTRL_FREQ_SEL_100K 0
+#define TWSI_CTRL_FREQ_SEL_200K 1
+#define TWSI_CTRL_FREQ_SEL_300K 2
+#define TWSI_CTRL_FREQ_SEL_400K 3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
+
+#define REG_PCIE_DEV_MISC_CTRL 0x21C
+#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
+#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
+#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
+#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
+#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
+
+/** Selene Master Control Register */
+#define REG_MASTER_CTRL 0x1400
+#define MASTER_CTRL_SOFT_RST 0x1
+#define MASTER_CTRL_MTIMER_EN 0x2
+#define MASTER_CTRL_ITIMER_EN 0x4
+#define MASTER_CTRL_MANUAL_INT 0x8
+#define MASTER_CTRL_REV_NUM_SHIFT 16
+#define MASTER_CTRL_REV_NUM_MASK 0xff
+#define MASTER_CTRL_DEV_ID_SHIFT 24
+#define MASTER_CTRL_DEV_ID_MASK 0xff
+
+/** Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT 0x1404
+
+/** IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODU_TIMER_INIT 0x1408
+
+#define REG_GPHY_ENABLE 0x140C
+
+/** IRQ Anti-Lost Timer Initial Value Register */
+#define REG_CMBDISDMA_TIMER 0x140E
+
+/** Block IDLE Status Register */
+#define REG_IDLE_STATUS 0x1410
+#define IDLE_STATUS_RXMAC 1
+#define IDLE_STATUS_TXMAC 2
+#define IDLE_STATUS_RXQ 4
+#define IDLE_STATUS_TXQ 8
+#define IDLE_STATUS_DMAR 0x10
+#define IDLE_STATUS_DMAW 0x20
+#define IDLE_STATUS_SMB 0x40
+#define IDLE_STATUS_CMB 0x80
+
+/** MDIO Control Register */
+#define REG_MDIO_CTRL 0x1414
+#define MDIO_DATA_MASK 0xffff
+#define MDIO_DATA_SHIFT 0
+#define MDIO_REG_ADDR_MASK 0x1f
+#define MDIO_REG_ADDR_SHIFT 16
+#define MDIO_RW 0x200000
+#define MDIO_SUP_PREAMBLE 0x400000
+#define MDIO_START 0x800000
+#define MDIO_CLK_SEL_SHIFT 24
+#define MDIO_CLK_25_4 0
+#define MDIO_CLK_25_6 2
+#define MDIO_CLK_25_8 3
+#define MDIO_CLK_25_10 4
+#define MDIO_CLK_25_14 5
+#define MDIO_CLK_25_20 6
+#define MDIO_CLK_25_28 7
+#define MDIO_BUSY 0x8000000
+#define MDIO_WAIT_TIMES 30
+
+/** MII PHY Status Register */
+#define REG_PHY_STATUS 0x1418
+
+/** BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL 0x141c
+#define BIST0_NOW 0x1
+#define BIST0_SRAM_FAIL 0x2
+#define BIST0_FUSE_FLAG 0x4
+#define REG_BIST1_CTRL 0x1420
+#define BIST1_NOW 0x1
+#define BIST1_SRAM_FAIL 0x2
+#define BIST1_FUSE_FLAG 0x4
+
+/** MAC Control Register */
+#define REG_MAC_CTRL 0x1480
+#define MAC_CTRL_TX_EN 1
+#define MAC_CTRL_RX_EN 2
+#define MAC_CTRL_TX_FLOW 4
+#define MAC_CTRL_RX_FLOW 8
+#define MAC_CTRL_LOOPBACK 0x10
+#define MAC_CTRL_DUPLX 0x20
+#define MAC_CTRL_ADD_CRC 0x40
+#define MAC_CTRL_PAD 0x80
+#define MAC_CTRL_LENCHK 0x100
+#define MAC_CTRL_HUGE_EN 0x200
+#define MAC_CTRL_PRMLEN_SHIFT 10
+#define MAC_CTRL_PRMLEN_MASK 0xf
+#define MAC_CTRL_RMV_VLAN 0x4000
+#define MAC_CTRL_PROMIS_EN 0x8000
+#define MAC_CTRL_TX_PAUSE 0x10000
+#define MAC_CTRL_SCNT 0x20000
+#define MAC_CTRL_SRST_TX 0x40000
+#define MAC_CTRL_TX_SIMURST 0x80000
+#define MAC_CTRL_SPEED_SHIFT 20
+#define MAC_CTRL_SPEED_MASK 0x300000
+#define MAC_CTRL_SPEED_1000 2
+#define MAC_CTRL_SPEED_10_100 1
+#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
+#define MAC_CTRL_TX_HUGE 0x800000
+#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
+#define MAC_CTRL_MC_ALL_EN 0x2000000
+#define MAC_CTRL_BC_EN 0x4000000
+#define MAC_CTRL_DBG 0x8000000
+
+/** MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT 0
+#define MAC_IPG_IFG_IPGT_MASK 0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT 8
+#define MAC_IPG_IFG_MIFG_MASK 0xff
+#define MAC_IPG_IFG_IPGR1_SHIFT 16
+#define MAC_IPG_IFG_IPGR1_MASK 0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT 24
+#define MAC_IPG_IFG_IPGR2_MASK 0x7f
+
+/** MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR 0x1488
+
+/** Hash table for multicast address */
+#define REG_RX_HASH_TABLE 0x1490
+
+/** MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
+#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf
+
+/** Maximum Frame Length Control Register */
+#define REG_MTU 0x149c
+
+/** Wake-On-Lan control register */
+#define REG_WOL_CTRL 0x14a0
+#define WOL_PATTERN_EN 0x00000001
+#define WOL_PATTERN_PME_EN 0x00000002
+#define WOL_MAGIC_EN 0x00000004
+#define WOL_MAGIC_PME_EN 0x00000008
+#define WOL_LINK_CHG_EN 0x00000010
+#define WOL_LINK_CHG_PME_EN 0x00000020
+#define WOL_PATTERN_ST 0x00000100
+#define WOL_MAGIC_ST 0x00000200
+#define WOL_LINKCHG_ST 0x00000400
+#define WOL_CLK_SWITCH_EN 0x00008000
+#define WOL_PT0_EN 0x00010000
+#define WOL_PT1_EN 0x00020000
+#define WOL_PT2_EN 0x00040000
+#define WOL_PT3_EN 0x00080000
+#define WOL_PT4_EN 0x00100000
+#define WOL_PT5_EN 0x00200000
+#define WOL_PT6_EN 0x00400000
+
+/** WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN 0x14a4
+#define WOL_PT_LEN_MASK 0x7f
+#define WOL_PT0_LEN_SHIFT 0
+#define WOL_PT1_LEN_SHIFT 8
+#define WOL_PT2_LEN_SHIFT 16
+#define WOL_PT3_LEN_SHIFT 24
+#define WOL_PT4_LEN_SHIFT 0
+#define WOL_PT5_LEN_SHIFT 8
+#define WOL_PT6_LEN_SHIFT 16
+
+/** Internal SRAM Partition Register */
+#define REG_SRAM_RFD_ADDR 0x1500
+#define REG_SRAM_RFD_LEN (REG_SRAM_RFD_ADDR+ 4)
+#define REG_SRAM_RRD_ADDR (REG_SRAM_RFD_ADDR+ 8)
+#define REG_SRAM_RRD_LEN (REG_SRAM_RFD_ADDR+12)
+#define REG_SRAM_TPD_ADDR (REG_SRAM_RFD_ADDR+16)
+#define REG_SRAM_TPD_LEN (REG_SRAM_RFD_ADDR+20)
+#define REG_SRAM_TRD_ADDR (REG_SRAM_RFD_ADDR+24)
+#define REG_SRAM_TRD_LEN (REG_SRAM_RFD_ADDR+28)
+#define REG_SRAM_RXF_ADDR (REG_SRAM_RFD_ADDR+32)
+#define REG_SRAM_RXF_LEN (REG_SRAM_RFD_ADDR+36)
+#define REG_SRAM_TXF_ADDR (REG_SRAM_RFD_ADDR+40)
+#define REG_SRAM_TXF_LEN (REG_SRAM_RFD_ADDR+44)
+#define REG_SRAM_TCPH_PATH_ADDR (REG_SRAM_RFD_ADDR+48)
+#define SRAM_TCPH_ADDR_MASK 0x0fff
+#define SRAM_TCPH_ADDR_SHIFT 0
+#define SRAM_PATH_ADDR_MASK 0x0fff
+#define SRAM_PATH_ADDR_SHIFT 16
+
+/** Load Ptr Register */
+#define REG_LOAD_PTR (REG_SRAM_RFD_ADDR+52)
+
+/** Descriptor Control register */
+#define REG_DESC_BASE_ADDR_HI 0x1540
+#define REG_DESC_RFD_ADDR_LO (REG_DESC_BASE_ADDR_HI+4)
+#define REG_DESC_RRD_ADDR_LO (REG_DESC_BASE_ADDR_HI+8)
+#define REG_DESC_TPD_ADDR_LO (REG_DESC_BASE_ADDR_HI+12)
+#define REG_DESC_CMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+16)
+#define REG_DESC_SMB_ADDR_LO (REG_DESC_BASE_ADDR_HI+20)
+#define REG_DESC_RFD_RRD_RING_SIZE (REG_DESC_BASE_ADDR_HI+24)
+#define DESC_RFD_RING_SIZE_MASK 0x7ff
+#define DESC_RFD_RING_SIZE_SHIFT 0
+#define DESC_RRD_RING_SIZE_MASK 0x7ff
+#define DESC_RRD_RING_SIZE_SHIFT 16
+#define REG_DESC_TPD_RING_SIZE (REG_DESC_BASE_ADDR_HI+28)
+#define DESC_TPD_RING_SIZE_MASK 0x3ff
+#define DESC_TPD_RING_SIZE_SHIFT 0
+
+/** TXQ Control Register */
+#define REG_TXQ_CTRL 0x1580
+#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0
+#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1f
+#define TXQ_CTRL_EN 0x20
+#define TXQ_CTRL_ENH_MODE 0x40
+#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8
+#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3f
+#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16
+#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xffff
+
+/** Jumbo packet Threshold for task offload */
+#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584
+#define TX_JUMBO_TASK_TH_MASK 0x7ff
+#define TX_JUMBO_TASK_TH_SHIFT 0
+#define TX_TPD_MIN_IPG_MASK 0x1f
+#define TX_TPD_MIN_IPG_SHIFT 16
+
+/** RXQ Control Register */
+#define REG_RXQ_CTRL 0x15a0
+#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0
+#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xff
+#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8
+#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xff
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16
+#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1f
+#define RXQ_CTRL_CUT_THRU_EN 0x40000000
+#define RXQ_CTRL_EN 0x80000000
+
+/** Rx jumbo packet threshold and rrd retirement timer */
+#define REG_RXQ_JMBOSZ_RRDTIM (REG_RXQ_CTRL+ 4)
+#define RXQ_JMBOSZ_TH_MASK 0x7ff
+#define RXQ_JMBOSZ_TH_SHIFT 0
+#define RXQ_JMBO_LKAH_MASK 0xf
+#define RXQ_JMBO_LKAH_SHIFT 11
+#define RXQ_RRD_TIMER_MASK 0xffff
+#define RXQ_RRD_TIMER_SHIFT 16
+
+/** RFD flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH (REG_RXQ_CTRL+ 8)
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16
+#define RXQ_RXF_PAUSE_TH_HI_MASK 0xfff
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0
+#define RXQ_RXF_PAUSE_TH_LO_MASK 0xfff
+
+/** RRD flow control register */
+#define REG_RXQ_RRD_PAUSE_THRESH (REG_RXQ_CTRL+12)
+#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0
+#define RXQ_RRD_PAUSE_TH_HI_MASK 0xfff
+#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16
+#define RXQ_RRD_PAUSE_TH_LO_MASK 0xfff
+
+/** DMA Engine Control Register */
+#define REG_DMA_CTRL 0x15c0
+#define DMA_CTRL_DMAR_IN_ORDER 0x1
+#define DMA_CTRL_DMAR_ENH_ORDER 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER 0x4
+#define DMA_CTRL_RCB_VALUE 0x8
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
+#define DMA_CTRL_DMAR_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
+#define DMA_CTRL_DMAW_BURST_LEN_MASK 7
+#define DMA_CTRL_DMAR_EN 0x400
+#define DMA_CTRL_DMAW_EN 0x800
+
+/** CMB/SMB Control Register */
+#define REG_CSMB_CTRL 0x15d0
+#define CSMB_CTRL_CMB_NOW 1
+#define CSMB_CTRL_SMB_NOW 2
+#define CSMB_CTRL_CMB_EN 4
+#define CSMB_CTRL_SMB_EN 8
+
+/** CMB DMA Write Threshold Register */
+#define REG_CMB_WRITE_TH (REG_CSMB_CTRL+ 4)
+#define CMB_RRD_TH_SHIFT 0
+#define CMB_RRD_TH_MASK 0x7ff
+#define CMB_TPD_TH_SHIFT 16
+#define CMB_TPD_TH_MASK 0x7ff
+
+/** RX/TX count-down timer to trigger CMB-write. 2us resolution. */
+#define REG_CMB_WRITE_TIMER (REG_CSMB_CTRL+ 8)
+#define CMB_RX_TM_SHIFT 0
+#define CMB_RX_TM_MASK 0xffff
+#define CMB_TX_TM_SHIFT 16
+#define CMB_TX_TM_MASK 0xffff
+
+/** Number of packet received since last CMB write */
+#define REG_CMB_RX_PKT_CNT (REG_CSMB_CTRL+12)
+
+/** Number of packet transmitted since last CMB write */
+#define REG_CMB_TX_PKT_CNT (REG_CSMB_CTRL+16)
+
+/** SMB auto DMA timer register */
+#define REG_SMB_TIMER (REG_CSMB_CTRL+20)
+
+/** Mailbox Register */
+#define REG_MAILBOX 0x15f0
+#define MB_RFD_PROD_INDX_SHIFT 0
+#define MB_RFD_PROD_INDX_MASK 0x7ff
+#define MB_RRD_CONS_INDX_SHIFT 11
+#define MB_RRD_CONS_INDX_MASK 0x7ff
+#define MB_TPD_PROD_INDX_SHIFT 22
+#define MB_TPD_PROD_INDX_MASK 0x3ff
+
+/** Interrupt Status Register */
+#define REG_ISR 0x1600
+#define ISR_SMB 1
+#define ISR_TIMER 2
+#define ISR_MANUAL 4
+#define ISR_RXF_OV 8
+#define ISR_RFD_UNRUN 0x10
+#define ISR_RRD_OV 0x20
+#define ISR_TXF_UNRUN 0x40
+#define ISR_LINK 0x80
+#define ISR_HOST_RFD_UNRUN 0x100
+#define ISR_HOST_RRD_OV 0x200
+#define ISR_DMAR_TO_RST 0x400
+#define ISR_DMAW_TO_RST 0x800
+#define ISR_GPHY 0x1000
+#define ISR_RX_PKT 0x10000
+#define ISR_TX_PKT 0x20000
+#define ISR_TX_DMA 0x40000
+#define ISR_RX_DMA 0x80000
+#define ISR_CMB_RX 0x100000
+#define ISR_CMB_TX 0x200000
+#define ISR_MAC_RX 0x400000
+#define ISR_MAC_TX 0x800000
+#define ISR_UR_DETECTED 0x1000000
+#define ISR_FERR_DETECTED 0x2000000
+#define ISR_NFERR_DETECTED 0x4000000
+#define ISR_CERR_DETECTED 0x8000000
+#define ISR_PHY_LINKDOWN 0x10000000
+#define ISR_DIS_SMB 0x20000000
+#define ISR_DIS_DMA 0x40000000
+#define ISR_DIS_INT 0x80000000
+
+/** Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+/** Normal Interrupt mask */
+#define IMR_NORMAL_MASK (\
+ ISR_SMB |\
+ ISR_GPHY |\
+ ISR_PHY_LINKDOWN|\
+ ISR_DMAR_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX )
+
+/** Debug Interrupt Mask (enable all interrupt) */
+#define IMR_DEBUG_MASK (\
+ ISR_SMB |\
+ ISR_TIMER |\
+ ISR_MANUAL |\
+ ISR_RXF_OV |\
+ ISR_RFD_UNRUN |\
+ ISR_RRD_OV |\
+ ISR_TXF_UNRUN |\
+ ISR_LINK |\
+ ISR_CMB_TX |\
+ ISR_CMB_RX |\
+ ISR_RX_PKT |\
+ ISR_TX_PKT |\
+ ISR_MAC_RX |\
+ ISR_MAC_TX )
+
+/** Interrupt Status Register */
+#define REG_RFD_RRD_IDX 0x1800
+#define REG_TPD_IDX 0x1804
+
+/** MII definition
+ * PHY Common Register */
+#define MII_BMCR 0x00
+#define MII_BMSR 0x01
+#define MII_PHYSID1 0x02
+#define MII_PHYSID2 0x03
+#define MII_ADVERTISE 0x04
+#define MII_LPA 0x05
+#define MII_EXPANSION 0x06
+#define MII_AT001_CR 0x09
+#define MII_AT001_SR 0x0A
+#define MII_AT001_ESR 0x0F
+#define MII_AT001_PSCR 0x10
+#define MII_AT001_PSSR 0x11
+#define MII_DCOUNTER 0x12
+#define MII_FCSCOUNTER 0x13
+#define MII_NWAYTEST 0x14
+#define MII_RERRCOUNTER 0x15
+#define MII_SREVISION 0x16
+#define MII_RESV1 0x17
+#define MII_LBRERROR 0x18
+#define MII_PHYADDR 0x19
+#define MII_RESV2 0x1a
+#define MII_TPISTATUS 0x1b
+#define MII_NCONFIG 0x1c
+
+/** PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_MASK 0x2040
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/** PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/** Link partner ability register. */
+#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
+#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
+#define MII_LPA_PAUSE 0x0400 /* PAUSE */
+#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
+#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
+#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
+#define MII_LPA_NPAGE 0x8000 /* Next page bit */
+
+/** Autoneg Advertisement Register */
+#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
+#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+#define MII_AR_SPEED_MASK 0x01E0
+#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
+
+/** 1000BASE-T Control Register */
+#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port, 0=DTE device */
+#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master, 0=Configure PHY as Slave */
+#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value, 0=Automatic Master/Slave config */
+#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+#define MII_AT001_CR_1000T_SPEED_MASK 0x0300
+#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300
+
+/** 1000BASE-T Status Register */
+#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+
+/** Extended Status Register */
+#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+/** AT001 PHY Specific Control Register */
+#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define MII_AT001_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define MII_AT001_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define MII_AT001_PSCR_MAC_POWERDOWN 0x0008
+#define MII_AT001_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 0=CLK125 toggling */
+#define MII_AT001_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5, Manual MDI configuration */
+#define MII_AT001_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define MII_AT001_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define MII_AT001_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled all speeds. */
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold), 0=Normal 10BASE-T RX Threshold */
+#define MII_AT001_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define MII_AT001_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define MII_AT001_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define MII_AT001_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+#define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define MII_AT001_PSCR_AUTO_X_MODE_SHIFT 5
+#define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/** AT001 PHY Specific Status Register */
+#define MII_AT001_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define MII_AT001_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define MII_AT001_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define MII_AT001_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define MII_AT001_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define MII_AT001_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+/** PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
+#define CMD_IO_SPACE 0x0001
+#define CMD_MEMORY_SPACE 0x0002
+#define CMD_BUS_MASTER 0x0004
+
+/** Wake Up Filter Control */
+#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
+#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+/** Error Codes */
+#define AT_SUCCESS 0
+#define AT_ERR_EEPROM 1
+#define AT_ERR_PHY 2
+#define AT_ERR_CONFIG 3
+#define AT_ERR_PARAM 4
+#define AT_ERR_MAC_TYPE 5
+#define AT_ERR_PHY_TYPE 6
+#define AT_ERR_PHY_SPEED 7
+#define AT_ERR_PHY_RES 8
+
+#define SPEED_0 0xffff
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define MEDIA_TYPE_AUTO_SENSOR 0
+#define MEDIA_TYPE_1000M_FULL 1
+#define MEDIA_TYPE_100M_FULL 2
+#define MEDIA_TYPE_100M_HALF 3
+#define MEDIA_TYPE_10M_FULL 4
+#define MEDIA_TYPE_10M_HALF 5
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+/** The size (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MAX_JUMBO_FRAME_SIZE 0x2800
+
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+
+/** For checksumming , the sum of all words in the EEPROM should equal 0xBABA */
+#define EEPROM_SUM 0xBABA
+#define NODE_ADDRESS_SIZE 6
+
+/** Statistics counters collected by the MAC */
+struct stats_msg_block {
+ /* rx */
+ u32 rx_ok; /* The number of good packet received. */
+ u32 rx_bcast; /* The number of good broadcast packet received. */
+ u32 rx_mcast; /* The number of good multicast packet received. */
+ u32 rx_pause; /* The number of Pause packet received. */
+ u32 rx_ctrl; /* The number of Control packet received other than Pause frame. */
+ u32 rx_fcs_err; /* The number of packets with bad FCS. */
+ u32 rx_len_err; /* The number of packets with mismatch of length field and actual size. */
+ u32 rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */
+ u32 rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */
+ u32 rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */
+ u32 rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */
+ u32 rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */
+ u32 rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */
+ u32 rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */
+ u32 rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+ u32 rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+ u32 rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
+ u32 rx_sz_ov; /* The number of good and bad packets received that are more than MTU size šC truncated by Selene. */
+ u32 rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+ u32 rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */
+ u32 rx_align_err; /* Alignment Error */
+ u32 rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
+ u32 rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
+ u32 rx_err_addr; /* The number of packets dropped due to address filtering. */
+
+ /* tx */
+ u32 tx_ok; /* The number of good packet transmitted. */
+ u32 tx_bcast; /* The number of good broadcast packet transmitted. */
+ u32 tx_mcast; /* The number of good multicast packet transmitted. */
+ u32 tx_pause; /* The number of Pause packet transmitted. */
+ u32 tx_exc_defer; /* The number of packets transmitted with excessive deferral. */
+ u32 tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */
+ u32 tx_defer; /* The number of packets transmitted that is deferred. */
+ u32 tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */
+ u32 tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */
+ u32 tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+ u32 tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+ u32 tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+ u32 tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+ u32 tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+ u32 tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+ u32 tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */
+ u32 tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+ u32 tx_late_col; /* The number of packets transmitted with late collisions. */
+ u32 tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */
+ u32 tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+ u32 tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+ u32 tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */
+ u32 tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */
+ u32 tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */
+ u32 tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */
+ u32 smb_updated; /* 1: SMB Updated. This is used by software as the indication of the statistics update.
+ * Software should clear this bit as soon as retrieving the statistics information. */
+} _AT_ATTRIB_PACK_;
+
+/** Coalescing Message Block */
+struct coals_msg_block {
+ u32 int_stats; /* interrupt status */
+ u16 rrd_prod_idx; /* TRD Producer Index. */
+ u16 rfd_cons_idx; /* RFD Consumer Index. */
+ u16 update; /* Selene sets this bit every time it DMA the CMB to host memory.
+ * Software supposes to clear this bit when CMB information is processed. */
+ u16 tpd_cons_idx; /* TPD Consumer Index. */
+} _AT_ATTRIB_PACK_;
+
+/** RRD descriptor */
+struct rx_return_desc {
+ u8 num_buf; /* Number of RFD buffers used by the received packet */
+ u8 resved;
+ u16 buf_indx; /* RFD Index of the first buffer */
+ union {
+ u32 valid;
+ struct {
+ u16 rx_chksum;
+ u16 pkt_size;
+ } xsum_sz;
+ } xsz;
+
+ u16 pkt_flg; /* Packet flags */
+ u16 err_flg; /* Error flags */
+ u16 resved2;
+ u16 vlan_tag; /* VLAN TAG */
+} _AT_ATTRIB_PACK_;
+
+#define PACKET_FLAG_ETH_TYPE 0x0080
+#define PACKET_FLAG_VLAN_INS 0x0100
+#define PACKET_FLAG_ERR 0x0200
+#define PACKET_FLAG_IPV4 0x0400
+#define PACKET_FLAG_UDP 0x0800
+#define PACKET_FLAG_TCP 0x1000
+#define PACKET_FLAG_BCAST 0x2000
+#define PACKET_FLAG_MCAST 0x4000
+#define PACKET_FLAG_PAUSE 0x8000
+
+#define ERR_FLAG_CRC 0x0001
+#define ERR_FLAG_CODE 0x0002
+#define ERR_FLAG_DRIBBLE 0x0004
+#define ERR_FLAG_RUNT 0x0008
+#define ERR_FLAG_OV 0x0010
+#define ERR_FLAG_TRUNC 0x0020
+#define ERR_FLAG_IP_CHKSUM 0x0040
+#define ERR_FLAG_L4_CHKSUM 0x0080
+#define ERR_FLAG_LEN 0x0100
+#define ERR_FLAG_DES_ADDR 0x0200
+
+/** RFD descriptor */
+struct rx_free_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 buf_len; /* Size of the receive buffer in host memory, in byte */
+ u16 coalese; /* Update consumer index to host after the reception of this frame */
+} _AT_ATTRIB_PACK_;
+
+/** TPD descriptor */
+struct tso_param {
+ unsigned buf_len:14;
+ unsigned dma_int:1;
+ unsigned pkt_int:1;
+ u16 valan_tag;
+ unsigned eop:1;
+ /* command */
+ unsigned coalese:1;
+ unsigned ins_vlag:1;
+ unsigned custom_chksum:1;
+ unsigned segment:1;
+ unsigned ip_chksum:1;
+ unsigned tcp_chksum:1;
+ unsigned udp_chksum:1;
+ /* packet state */
+ unsigned vlan_tagged:1;
+ unsigned eth_type:1;
+ unsigned iphl:4;
+ unsigned tcp_hdrlen:4;
+ unsigned hdr_flg:1;
+ unsigned mss:13;
+} _AT_ATTRIB_PACK_;
+
+struct csum_param {
+ unsigned buf_len:14;
+ unsigned dma_int:1;
+ unsigned pkt_int:1;
+ u16 valan_tag;
+ unsigned eop:1;
+ /* command */
+ unsigned coalese:1;
+ unsigned ins_vlag:1;
+ unsigned custom_chksum:1;
+ unsigned segment:1;
+ unsigned ip_chksum:1;
+ unsigned tcp_chksum:1;
+ unsigned udp_chksum:1;
+ /* packet state */
+ unsigned vlan_tagged:1;
+ unsigned eth_type:1;
+ unsigned iphl:4;
+ unsigned:2;
+ unsigned payload_offset:8;
+ unsigned xsum_offset:8;
+} _AT_ATTRIB_PACK_;
+
+union tpd_descr {
+ u64 data;
+ struct csum_param csum;
+ struct tso_param tso;
+} _AT_ATTRIB_PACK_;
+
+struct tx_packet_desc {
+ __le64 buffer_addr;
+ union tpd_descr desc;
+} _AT_ATTRIB_PACK_;
+
+/** DMA Order Settings */
+enum at_dma_order {
+ at_dma_ord_in = 1,
+ at_dma_ord_enh = 2,
+ at_dma_ord_out = 4
+};
+
+enum at_dma_rcb {
+ at_rcb_64 = 0,
+ at_rcb_128 = 1
+};
+
+enum at_dma_req_block {
+ at_dma_req_128 = 0,
+ at_dma_req_256 = 1,
+ at_dma_req_512 = 2,
+ at_dam_req_1024 = 3,
+ at_dam_req_2048 = 4,
+ at_dma_req_4096 = 5
+};
+
+/* UNUSED - jkc 20061118
+enum at_speed_duplex_type {
+ at_10_half = 0,
+ at_10_full = 1,
+ at_100_half = 2,
+ at_100_full = 3
+};
+*/
+
+struct spi_flash_dev {
+ const char *manu_name; /* manufacturer id */
+ /* op-code */
+ u8 cmd_wrsr;
+ u8 cmd_read;
+ u8 cmd_program;
+ u8 cmd_wren;
+ u8 cmd_wrdi;
+ u8 cmd_rdsr;
+ u8 cmd_rdid;
+ u8 cmd_sector_erase;
+ u8 cmd_chip_erase;
+};
+
+/** Structure containing variables used by the shared code */
+struct at_hw {
+ u8 __iomem *hw_addr;
+ void *back;
+
+ enum at_dma_order dma_ord;
+ enum at_dma_rcb rcb_value;
+ enum at_dma_req_block dmar_block;
+ enum at_dma_req_block dmaw_block;
+
+ u8 preamble_len;
+ u8 max_retry; /* Retransmission maximum , afterwards the packet will be discarded. */
+ u8 jam_ipg; /* IPG to start JAM for collision based flow control in half-duplex mode. In unit of 8-bit time. */
+ u8 ipgt; /* Desired back to back inter-packet gap. The default is 96-bit time. */
+ u8 min_ifg; /* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped. */
+ u8 ipgr1; /* 64bit Carrier-Sense window */
+ u8 ipgr2; /* 96-bit IPG window */
+
+ u8 tpd_burst; /* Number of TPD to prefetch in a cache-aligned burst. Each TPD is 16-byte in length. */
+ u8 rfd_burst; /* Number of RFD to prefetch in a cache-aligned burst. Each RFD is 12-byte in length. */
+ u8 rfd_fetch_gap;
+ u8 rrd_burst; /* Threshold of number of RRDs can be retired in a burst. Each RRD is 16-byte in length. */
+ u8 tpd_fetch_th;
+ u8 tpd_fetch_gap;
+ u16 tx_jumbo_task_th;
+ u16 txf_burst; /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */
+ u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN packet should add 4-byte */
+ u16 rx_jumbo_lkah;
+ u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after every 512ns passes. */
+ u16 lcol; /* Collision Window */
+
+ u16 cmb_tpd;
+ u16 cmb_rrd;
+ u16 cmb_rx_timer;
+ u16 cmb_tx_timer;
+ u32 smb_timer;
+ u16 media_type;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ u32 mem_rang;
+ u32 txcw;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u16 phy_spd_default;
+
+ u16 dev_rev;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+
+ /* spi flash */
+ u8 flash_vendor;
+
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+
+ /* bool phy_preamble_sup; */
+ bool phy_configured;
+};
+
+#endif /* _ATL1_HW_H_ */
diff --git a/drivers/net/atl1/atl1_osdep.h b/drivers/net/atl1/atl1_osdep.h
new file mode 100644
index 0000000..8e0c097
--- /dev/null
+++ b/drivers/net/atl1/atl1_osdep.h
@@ -0,0 +1,78 @@
+/** atl1_osdep.h
+
+Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
+Copyright(c) 2006 Chris Snook <[email protected]>
+Copyright(c) 2006 Jay Cliburn <[email protected]>
+
+Derived from Intel e1000 driver
+Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 of the License, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 59
+Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#ifndef _ATL1_OSDEP_H_
+#define _ATL1_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#define usec_delay(x) udelay(x)
+#ifndef msec_delay
+#define msec_delay(x) do { if(in_interrupt()) { \
+ /* Don't mdelay in interrupt context!*/ \
+ BUG(); \
+ } else { \
+ msleep(x); \
+ }} while(0)
+/* Some workarounds require millisecond delays and are run during interrupt
+ * context. Most notably, when establishing link, the phy may need tweaking
+ * but cannot process phy register reads/writes faster than millisecond
+ * intervals...and we establish link due to a "link status change" interrupt.
+ */
+#define msec_delay_irq(x) mdelay(x)
+#endif
+
+#define PCI_COMMAND_REGISTER PCI_COMMAND
+#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
+
+#define AT_WRITE_REG(a, reg, value) ( \
+ writel((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REG(a, reg) ( \
+ readl((a)->hw_addr + reg ))
+
+#define AT_WRITE_REGB(a, reg, value) (\
+ writeb((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGB(a, reg) (\
+ readb((a)->hw_addr + reg))
+
+#define AT_WRITE_REGW(a, reg, value) (\
+ writew((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGW(a, reg) (\
+ readw((a)->hw_addr + reg))
+
+#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
+
+#define AT_READ_REG_ARRAY(a, reg, offset) ( \
+ readl(((a)->hw_addr + reg) + ((offset) << 2)))
+
+#endif /* _ATL1_OSDEP_H_ */


2006-11-19 21:42:40

by Jan Engelhardt

[permalink] [raw]
Subject: Re: [PATCH 2/4] atl1: Header files for Attansic L1 driver


On Nov 19 2006 14:30, Jay Cliburn wrote:
>+
>+#define LBYTESWAP( a ) ( ( ( (a) & 0x00ff00ff ) << 8 ) | ( ( (a) & 0xff00ff00 ) >> 8 ) )
>+#define LONGSWAP( a ) ( ( LBYTESWAP( a ) << 16 ) | ( LBYTESWAP( a ) >> 16 ) )
>+#define SHORTSWAP( a ) ( ( (a) << 8 ) | ( (a) >> 8 ) )

Please use swab16/swab32 for these.

>+#define AT_DESC_UNUSED(R) \
>+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
>+ (R)->next_to_clean - (R)->next_to_use - 1)
>+
>+#define AT_DESC_USED(R) \
>+ (((R)->next_to_clean > (R)->next_to_use) ? \
>+ ((R)->count+(R)->next_to_use-(R)->next_to_clean+1) : \
>+ ((R)->next_to_use-(R)->next_to_clean+1))

These look like they are on the edge to be written as a static-inline function.
What do others think?

>+#define AT_WRITE_REG(a, reg, value) ( \
>+ writel((value), ((a)->hw_addr + reg)))
>+
>+#define AT_READ_REG(a, reg) ( \
>+ readl((a)->hw_addr + reg ))
>+
>+#define AT_WRITE_REGB(a, reg, value) (\
>+ writeb((value), ((a)->hw_addr + reg)))
>+
>+#define AT_READ_REGB(a, reg) (\
>+ readb((a)->hw_addr + reg))
>+
>+#define AT_WRITE_REGW(a, reg, value) (\
>+ writew((value), ((a)->hw_addr + reg)))
>+
>+#define AT_READ_REGW(a, reg) (\
>+ readw((a)->hw_addr + reg))
>+
>+#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
>+ writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
>+
>+#define AT_READ_REG_ARRAY(a, reg, offset) ( \
>+ readl(((a)->hw_addr + reg) + ((offset) << 2)))

Possibly similarly.


-`J'
--

2006-11-20 05:56:14

by Chris Snook

[permalink] [raw]
Subject: Re: [PATCH 2/4] atl1: Header files for Attansic L1 driver

Jay Cliburn wrote:
> From: Jay Cliburn <[email protected]>
>
> This patch contains the header files needed by the Attansic L1 gigabit
> ethernet adapter driver.
>
> Signed-off-by: Jay Cliburn <[email protected]>
> ---
Also add
From: Chris Snook <[email protected]>
Signed-off-by: Chris Snook <[email protected]>

-- Chris

2006-11-20 06:02:30

by Chris Snook

[permalink] [raw]
Subject: Re: [PATCH 2/4] atl1: Header files for Attansic L1 driver

Jan Engelhardt wrote:
> On Nov 19 2006 14:30, Jay Cliburn wrote:
>> +
>> +#define LBYTESWAP( a ) ( ( ( (a) & 0x00ff00ff ) << 8 ) | ( ( (a) & 0xff00ff00 ) >> 8 ) )
>> +#define LONGSWAP( a ) ( ( LBYTESWAP( a ) << 16 ) | ( LBYTESWAP( a ) >> 16 ) )
>> +#define SHORTSWAP( a ) ( ( (a) << 8 ) | ( (a) >> 8 ) )
>
> Please use swab16/swab32 for these.

Thanks for pointing this out. There's a lot of self-rolled stuff in the
vendor driver, and we haven't removed it all yet. That one should be
easy though.

>> +#define AT_DESC_UNUSED(R) \
>> + ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
>> + (R)->next_to_clean - (R)->next_to_use - 1)
>> +
>> +#define AT_DESC_USED(R) \
>> + (((R)->next_to_clean > (R)->next_to_use) ? \
>> + ((R)->count+(R)->next_to_use-(R)->next_to_clean+1) : \
>> + ((R)->next_to_use-(R)->next_to_clean+1))
>
> These look like they are on the edge to be written as a static-inline function.
> What do others think?

I agree. There's a lot of cosmetic work left to do on this driver, but
we felt it was time to get more eyes on it.

>> +#define AT_WRITE_REG(a, reg, value) ( \
>> + writel((value), ((a)->hw_addr + reg)))
>> +
>> +#define AT_READ_REG(a, reg) ( \
>> + readl((a)->hw_addr + reg ))
>> +
>> +#define AT_WRITE_REGB(a, reg, value) (\
>> + writeb((value), ((a)->hw_addr + reg)))
>> +
>> +#define AT_READ_REGB(a, reg) (\
>> + readb((a)->hw_addr + reg))
>> +
>> +#define AT_WRITE_REGW(a, reg, value) (\
>> + writew((value), ((a)->hw_addr + reg)))
>> +
>> +#define AT_READ_REGW(a, reg) (\
>> + readw((a)->hw_addr + reg))
>> +
>> +#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
>> + writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
>> +
>> +#define AT_READ_REG_ARRAY(a, reg, offset) ( \
>> + readl(((a)->hw_addr + reg) + ((offset) << 2)))
>
> Possibly similarly.

Yeah, we'll inline these as well. Would you say that level of cosmetic
cleanliness is required for merging, or should we focus solely on the
functional issues for now?

-- Chris

2006-11-20 11:17:38

by Jan Engelhardt

[permalink] [raw]
Subject: Re: [PATCH 2/4] atl1: Header files for Attansic L1 driver


On Nov 20 2006 01:01, Chris Snook wrote:
> Jan Engelhardt wrote:
>> > +#define AT_READ_REG_ARRAY(a, reg, offset) ( \
>> > + readl(((a)->hw_addr + reg) + ((offset) << 2)))
>>
>> Possibly similarly.
>
> Yeah, we'll inline these as well. Would you say that level of cosmetic
> cleanliness is required for merging, or should we focus solely on the
> functional issues for now?

Required? No I do not think so, there is worse code than this. (Don't
take that as an excuse to write bad code! :-)
It's just that it's easier to read if there are less parentheses.
These defines are a good example of border (define vs inline) cases.


-`J'
--