From: Vladimir Ananiev <[email protected]>
Framebuffer support for Siemens SX1; this is second big patch. (Third
one will be mixer/sound support). Support is simple / pretty minimal,
but seems to work okay (and is somehow important for a cell phone :-).
Signed-off-by: Pavel Machek <[email protected]>
diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
new file mode 100644
index 0000000..d148573
--- /dev/null
+++ b/drivers/video/omap/lcd_sx1.c
@@ -0,0 +1,331 @@
+/*
+ * File: drivers/video/omap/lcd_sx1.c
+ *
+ * LCD panel support for the Siemens SX1 mobile phone
+ *
+ * Current version : Vovan888 at gmail com, great help from FCA00000
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/mux.h>
+
+/*
+ * OMAP310 GPIO registers
+ */
+#define GPIO_DATA_INPUT 0xfffce000
+#define GPIO_DATA_OUTPUT 0xfffce004
+#define GPIO_DIR_CONTROL 0xfffce008
+#define GPIO_INT_CONTROL 0xfffce00c
+#define GPIO_INT_MASK 0xfffce010
+#define GPIO_INT_STATUS 0xfffce014
+#define GPIO_PIN_CONTROL 0xfffce018
+
+
+#define A_LCD_SSC_RD 3
+#define A_LCD_SSC_SD 7
+#define _A_LCD_RESET 9
+#define _A_LCD_SSC_CS 12
+#define _A_LCD_SSC_A0 13
+
+#define DSP_REG 0xE1017024
+
+const unsigned char INIT_1[12] = {
+ 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
+};
+
+const unsigned char INIT_2[127] = {
+ 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
+ 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
+ 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
+ 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
+ 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
+ 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
+ 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
+ 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
+};
+
+const unsigned char INIT_3[15] = {
+ 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
+ 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
+};
+
+static void epson_sendbyte(int flag, unsigned char byte)
+{
+ int i, shifter = 0x80;
+
+ if (!flag)
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
+ mdelay(2);
+ omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+
+ omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
+
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+ for (i = 0; i < 8; i++) {
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
+ omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
+ OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
+ shifter >>= 1;
+ }
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void init_system(void)
+{
+ omap_mcbsp_request(OMAP_MCBSP3);
+ omap_mcbsp_stop(OMAP_MCBSP3);
+}
+
+static void setup_GPIO(void)
+{
+ /* new wave */
+ omap_request_gpio(A_LCD_SSC_RD);
+ omap_request_gpio(A_LCD_SSC_SD);
+ omap_request_gpio(_A_LCD_RESET);
+ omap_request_gpio(_A_LCD_SSC_CS);
+ omap_request_gpio(_A_LCD_SSC_A0);
+
+ /* set all GPIOs to output */
+ omap_set_gpio_direction(A_LCD_SSC_RD, 0);
+ omap_set_gpio_direction(A_LCD_SSC_SD, 0);
+ omap_set_gpio_direction(_A_LCD_RESET, 0);
+ omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
+ omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
+
+ /* set GPIO data */
+ omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+ omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
+ omap_set_gpio_dataout(_A_LCD_RESET, 0);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+}
+
+static void display_init(void)
+{
+ int i;
+
+ omap_cfg_reg(MCBSP3_CLKX);
+
+ mdelay(2);
+ setup_GPIO();
+ mdelay(2);
+
+ /* reset LCD */
+ omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
+ epson_sendbyte(0, 0x25);
+
+ omap_set_gpio_dataout(_A_LCD_RESET, 0);
+ mdelay(10);
+ omap_set_gpio_dataout(_A_LCD_RESET, 1);
+
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(2);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD, phase 1 */
+ epson_sendbyte(0, 0xCA);
+ for (i = 0; i < 10; i++)
+ epson_sendbyte(1, INIT_1[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 2 */
+ epson_sendbyte(0, 0xCB);
+ for( i = 0; i < 125; i++)
+ epson_sendbyte(1, INIT_2[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 2a */
+ epson_sendbyte(0, 0xCC);
+ for( i = 0; i < 14; i++)
+ epson_sendbyte(1, INIT_3[i]);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 3 */
+ epson_sendbyte(0, 0xBC);
+ epson_sendbyte(1, 0x08);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 4 */
+ epson_sendbyte(0, 0x07);
+ epson_sendbyte(1, 0x05);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 5 */
+ epson_sendbyte(0, 0x94);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 6 */
+ epson_sendbyte(0, 0xC6);
+ epson_sendbyte(1, 0x80);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(100); /* used to be 1000 */
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 7 */
+ epson_sendbyte(0, 0x16);
+ epson_sendbyte(1, 0x02);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0xB1);
+ epson_sendbyte(1, 0x00);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 8 */
+ epson_sendbyte(0, 0x76);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0x00);
+ epson_sendbyte(1, 0xDB);
+ epson_sendbyte(1, 0x00);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ /* init LCD phase 9 */
+ epson_sendbyte(0, 0xAF);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+{
+ return 0;
+}
+
+static void sx1_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static void sx1_panel_disable(struct lcd_panel *panel)
+{
+ printk(KERN_INFO "SX1: LCD panel disable\n");
+ sx1_setmmipower(0);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+
+ epson_sendbyte(0, 0x25);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ epson_sendbyte(0, 0xAE);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+ mdelay(100);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+
+ epson_sendbyte(0, 0x95);
+ omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+}
+
+static int sx1_panel_enable(struct lcd_panel *panel)
+{
+#if 0
+ sx1_panel_disable(); /* try to disable panel first, if we boot from Symbian */
+#endif
+
+ printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
+ init_system();
+ display_init();
+
+ sx1_setmmipower(1);
+ sx1_setbacklight(0x18);
+ sx1_setkeylight (0x06);
+ return 0;
+}
+
+
+static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+struct lcd_panel sx1_panel = {
+ .name = "sx1",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+ OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
+ OMAP_LCDC_INV_OUTPUT_EN,
+
+ .x_res = 176,
+ .y_res = 220,
+ .data_lines = 16,
+ .bpp = 16,
+ .hsw = 5,
+ .hfp = 5,
+ .hbp = 5,
+ .vsw = 2,
+ .vfp = 1,
+ .vbp = 1,
+ .pixel_clock = 1500,
+
+ .init = sx1_panel_init,
+ .cleanup = sx1_panel_cleanup,
+ .enable = sx1_panel_enable,
+ .disable = sx1_panel_disable,
+ .get_caps= sx1_panel_get_caps,
+};
+
+static int sx1_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&sx1_panel);
+ return 0;
+}
+
+static int sx1_panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ return 0;
+}
+
+static int sx1_panel_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver sx1_panel_driver = {
+ .probe = sx1_panel_probe,
+ .remove = sx1_panel_remove,
+ .suspend = sx1_panel_suspend,
+ .resume = sx1_panel_resume,
+ .driver = {
+ .name = "lcd_sx1",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int sx1_panel_drv_init(void)
+{
+ return platform_driver_register(&sx1_panel_driver);
+}
+
+static void sx1_panel_drv_cleanup(void)
+{
+ platform_driver_unregister(&sx1_panel_driver);
+}
+
+module_init(sx1_panel_drv_init);
+module_exit(sx1_panel_drv_cleanup);
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
* Pavel Machek <[email protected]> [061118 18:16]:
> From: Vladimir Ananiev <[email protected]>
>
> Framebuffer support for Siemens SX1; this is second big patch. (Third
> one will be mixer/sound support). Support is simple / pretty minimal,
> but seems to work okay (and is somehow important for a cell phone :-).
Pushed to linux-omap. I guess you're planning to send the missing
Kconfig + Makefile patch for this?
Also, it would be better to use omap_mcbsp_xmit_word() or
omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
it does not do any checking that it worked. The aic23 and tsc2101
audio in linux-omap tree in general has the same problem.
Regards,
Tony
2006/11/20, Tony Lindgren <[email protected]>:
> * Pavel Machek <[email protected]> [061118 18:16]:
> > From: Vladimir Ananiev <[email protected]>
> >
> > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > one will be mixer/sound support). Support is simple / pretty minimal,
> > but seems to work okay (and is somehow important for a cell phone :-).
>
> Pushed to linux-omap. I guess you're planning to send the missing
> Kconfig + Makefile patch for this?
>
> Also, it would be better to use omap_mcbsp_xmit_word() or
> omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> it does not do any checking that it worked. The aic23 and tsc2101
> audio in linux-omap tree in general has the same problem.
>
> Regards,
>
> Tony
>
Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
On 11/21/06, Vladimir <[email protected]> wrote:
> 2006/11/20, Tony Lindgren <[email protected]>:
> > * Pavel Machek <[email protected]> [061118 18:16]:
> > > From: Vladimir Ananiev <[email protected]>
> > >
> > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > > one will be mixer/sound support). Support is simple / pretty minimal,
> > > but seems to work okay (and is somehow important for a cell phone :-).
> >
> > Pushed to linux-omap. I guess you're planning to send the missing
> > Kconfig + Makefile patch for this?
> >
> > Also, it would be better to use omap_mcbsp_xmit_word() or
> > omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> > it does not do any checking that it worked. The aic23 and tsc2101
> > audio in linux-omap tree in general has the same problem.
> >
> > Regards,
> >
> > Tony
> >
>
> Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
Please also send defconfig (may be siemens_sx1_defconfig OR
omap_sx1_310_defconfig) patch for this mobile once, your minimum
required patches are pushed to -omap git tree. Thanx.
--
---Komal Shah
http://komalshah.blogspot.com
Hi1
> >> > Framebuffer support for Siemens SX1; this is second big patch. (Third
> >> > one will be mixer/sound support). Support is simple / pretty minimal,
> >> > but seems to work okay (and is somehow important for a cell phone :-).
> >>
> >> Pushed to linux-omap. I guess you're planning to send the missing
> >> Kconfig + Makefile patch for this?
> >>
> >> Also, it would be better to use omap_mcbsp_xmit_word() or
> >> omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> >> it does not do any checking that it worked. The aic23 and tsc2101
> >> audio in linux-omap tree in general has the same problem.
> >>
> >> Regards,
> >>
> >> Tony
> >>
> >
> >Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> >so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
>
> Please also send defconfig (may be siemens_sx1_defconfig OR
> omap_sx1_310_defconfig) patch for this mobile once, your minimum
> required patches are pushed to -omap git tree. Thanx.
Yes, will do. I was trying to get it compiling first.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Can you post the framebufer driver to the framebuffer list. We like to do
peer review. Thank you :-)
On Tue, 21 Nov 2006, Vladimir wrote:
> 2006/11/20, Tony Lindgren <[email protected]>:
> > * Pavel Machek <[email protected]> [061118 18:16]:
> > > From: Vladimir Ananiev <[email protected]>
> > >
> > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > > one will be mixer/sound support). Support is simple / pretty minimal,
> > > but seems to work okay (and is somehow important for a cell phone :-).
> >
> > Pushed to linux-omap. I guess you're planning to send the missing
> > Kconfig + Makefile patch for this?
> >
> > Also, it would be better to use omap_mcbsp_xmit_word() or
> > omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> > it does not do any checking that it worked. The aic23 and tsc2101
> > audio in linux-omap tree in general has the same problem.
> >
> > Regards,
> >
> > Tony
> >
>
> Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
On 11/21/06, James Simmons <[email protected]> wrote:
>
> Can you post the framebufer driver to the framebuffer list. We like to do
> peer review. Thank you :-)
>
> On Tue, 21 Nov 2006, Vladimir wrote:
>
> > 2006/11/20, Tony Lindgren <[email protected]>:
> > > * Pavel Machek <[email protected]> [061118 18:16]:
> > > > From: Vladimir Ananiev <[email protected]>
> > > >
> > > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > > > one will be mixer/sound support). Support is simple / pretty minimal,
> > > > but seems to work okay (and is somehow important for a cell phone :-).
> > >
> > > Pushed to linux-omap. I guess you're planning to send the missing
> > > Kconfig + Makefile patch for this?
> > >
> > > Also, it would be better to use omap_mcbsp_xmit_word() or
> > > omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> > > it does not do any checking that it worked. The aic23 and tsc2101
> > > audio in linux-omap tree in general has the same problem.
> > >
> > > Regards,
> > >
> > > Tony
> > >
> >
> > Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> > so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
> > -
Again, framebuffer support patch is based on the omap framebuffer
driver, which is not yet submitted to upstream/fbdevel list. sx1
framebuffer support just fill up the hooks required by -omap fb driver
framework.
--
---Komal Shah
http://komalshah.blogspot.com
Hi,
* Komal Shah <[email protected]> [061121 15:35]:
> On 11/21/06, James Simmons <[email protected]> wrote:
> >
> >Can you post the framebufer driver to the framebuffer list. We like to do
> >peer review. Thank you :-)
It would be nice to get the framebuffer integrated. I think it would be
best if Imre submitted the patches as it's mostly his work.
Imre, do you have time to send the patches to framebuffer list? If not,
I can send them.
> >On Tue, 21 Nov 2006, Vladimir wrote:
> >
> >> 2006/11/20, Tony Lindgren <[email protected]>:
> >> > * Pavel Machek <[email protected]> [061118 18:16]:
> >> > > From: Vladimir Ananiev <[email protected]>
> >> > >
> >> > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> >> > > one will be mixer/sound support). Support is simple / pretty minimal,
> >> > > but seems to work okay (and is somehow important for a cell phone
> >:-).
> >> >
> >> > Pushed to linux-omap. I guess you're planning to send the missing
> >> > Kconfig + Makefile patch for this?
> >> >
> >> > Also, it would be better to use omap_mcbsp_xmit_word() or
> >> > omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> >> > it does not do any checking that it worked. The aic23 and tsc2101
> >> > audio in linux-omap tree in general has the same problem.
> >> >
> >> > Regards,
> >> >
> >> > Tony
> >> >
> >>
> >> Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> >> so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
> >> -
>
> Again, framebuffer support patch is based on the omap framebuffer
> driver, which is not yet submitted to upstream/fbdevel list. sx1
> framebuffer support just fill up the hooks required by -omap fb driver
> framework.
Yes, but the framebuffer code is in pretty much ready to be sent
upstream :)
Regards,
Tony
Hi Tony and all,
On Tue, Nov 21, 2006 at 04:47:25PM +0000, Tony Lindgren wrote:
> Hi,
>
> * Komal Shah <[email protected]> [061121 15:35]:
> > On 11/21/06, James Simmons <[email protected]> wrote:
> > >
> > >Can you post the framebufer driver to the framebuffer list. We like to do
> > >peer review. Thank you :-)
>
> It would be nice to get the framebuffer integrated. I think it would be
> best if Imre submitted the patches as it's mostly his work.
>
> Imre, do you have time to send the patches to framebuffer list? If not,
> I can send them.
Yes, I'm going to post it this week.
--Imre
>
> > >On Tue, 21 Nov 2006, Vladimir wrote:
> > >
> > >> 2006/11/20, Tony Lindgren <[email protected]>:
> > >> > * Pavel Machek <[email protected]> [061118 18:16]:
> > >> > > From: Vladimir Ananiev <[email protected]>
> > >> > >
> > >> > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > >> > > one will be mixer/sound support). Support is simple / pretty minimal,
> > >> > > but seems to work okay (and is somehow important for a cell phone
> > >:-).
> > >> >
> > >> > Pushed to linux-omap. I guess you're planning to send the missing
> > >> > Kconfig + Makefile patch for this?
> > >> >
> > >> > Also, it would be better to use omap_mcbsp_xmit_word() or
> > >> > omap_mcsbsp_spi_master_xmit_word_poll() instead of OMAP_MCBSP_WRITE as
> > >> > it does not do any checking that it worked. The aic23 and tsc2101
> > >> > audio in linux-omap tree in general has the same problem.
> > >> >
> > >> > Regards,
> > >> >
> > >> > Tony
> > >> >
> > >>
> > >> Hmm. McBSP3 in SX1 is used in "GPIO mode". The only line used is CLKX,
> > >> so I think OMAP_MCBSP_WRITE would be enough. Am I wrong ?
> > >> -
> >
> > Again, framebuffer support patch is based on the omap framebuffer
> > driver, which is not yet submitted to upstream/fbdevel list. sx1
> > framebuffer support just fill up the hooks required by -omap fb driver
> > framework.
>
> Yes, but the framebuffer code is in pretty much ready to be sent
> upstream :)
>
> Regards,
>
> Tony
Hi!
> >
> > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > one will be mixer/sound support). Support is simple / pretty minimal,
> > but seems to work okay (and is somehow important for a cell phone :-).
>
> Pushed to linux-omap. I guess you're planning to send the missing
> Kconfig + Makefile patch for this?
Yes, here it is. Actually no Kconfig change should be neccessary.
---
Add Makefile for sx1's lcd, and add sx1 to set of defconfigs.
Signed-off-by: Pavel Machek <[email protected]>
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
new file mode 100644
index 0000000..f6aa4c6
--- /dev/null
+++ b/arch/arm/configs/sx1_defconfig
@@ -0,0 +1,1037 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc6-omap1
+# Sat Nov 18 19:03:38 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_SHMEM is not set
+# CONFIG_SLAB is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+CONFIG_SLOB=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_CRAMFS_LINEAR is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index dcf25fa..f4a1033 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -23,6 +23,7 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd
objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
+objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
objs-y$(CONFIG_MACH_OMAP_PERSEUS2) += lcd_p2.o
objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
* Pavel Machek <[email protected]> [061124 11:03]:
> Hi!
>
>
> > >
> > > Framebuffer support for Siemens SX1; this is second big patch. (Third
> > > one will be mixer/sound support). Support is simple / pretty minimal,
> > > but seems to work okay (and is somehow important for a cell phone :-).
> >
> > Pushed to linux-omap. I guess you're planning to send the missing
> > Kconfig + Makefile patch for this?
>
> Yes, here it is. Actually no Kconfig change should be neccessary.
Thanks, pushing today to linux-omap.
Tony