Hello,
the build with the attached .config failed, make ends with:
...
CC [M] lib/crc-ccitt.o
CC [M] lib/crc16.o
CC [M] lib/ts_kmp.o
CC [M] lib/ts_bm.o
CC [M] lib/ts_fsm.o
LD arch/x86/lib/built-in.o
CC arch/x86/lib/bitops_32.o
AS arch/x86/lib/checksum_32.o
CC arch/x86/lib/delay_32.o
AS arch/x86/lib/getuser_32.o
CC arch/x86/lib/memcpy_32.o
AS arch/x86/lib/putuser_32.o
AS arch/x86/lib/semaphore_32.o
CC arch/x86/lib/string_32.o
CC arch/x86/lib/strstr_32.o
CC arch/x86/lib/usercopy_32.o
AR arch/x86/lib/lib.a
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o: In function `usbnet_set_settings':
(.text+0xf1876): undefined reference to `mii_ethtool_sset'
drivers/built-in.o: In function `usbnet_get_settings':
(.text+0xf1836): undefined reference to `mii_ethtool_gset'
drivers/built-in.o: In function `usbnet_get_link':
(.text+0xf18d6): undefined reference to `mii_link_ok'
drivers/built-in.o: In function `usbnet_nway_reset':
(.text+0xf18f6): undefined reference to `mii_nway_restart'
make: *** [.tmp_vmlinux1] Error 1
The build was made with :
$> make mrproper && make rndconfig && <tweak config file> && make oldconfig && make
Here's the config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc1
# Thu Nov 1 19:33:29 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_VMI is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_BKL is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_X86_PAE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_ACPI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
CONFIG_PCI_GOMMCONFIG=y
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
# CONFIG_MCA_LEGACY is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_INET6_AH is not set
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
CONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
# CONFIG_BRIDGE_EBT_802_3 is not set
# CONFIG_BRIDGE_EBT_AMONG is not set
CONFIG_BRIDGE_EBT_ARP=m
# CONFIG_BRIDGE_EBT_IP is not set
# CONFIG_BRIDGE_EBT_LIMIT is not set
# CONFIG_BRIDGE_EBT_MARK is not set
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
# CONFIG_BRIDGE_EBT_VLAN is not set
# CONFIG_BRIDGE_EBT_ARPREPLY is not set
# CONFIG_BRIDGE_EBT_DNAT is not set
CONFIG_BRIDGE_EBT_MARK_T=m
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=m
# CONFIG_BRIDGE_EBT_LOG is not set
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=m
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=m
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
# CONFIG_BT_HCIUART_H4 is not set
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
# CONFIG_IEEE80211 is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
CONFIG_SGI_IOC4=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_HD_IDE=y
# CONFIG_BLK_DEV_IDEDISK is not set
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
CONFIG_BLK_DEV_OFFBOARD=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_WDC_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=m
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
CONFIG_BLK_DEV_HD=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# An alternative FireWire stack is available with EXPERIMENTAL=y
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
# CONFIG_IEEE1394_VIDEO1394 is not set
#
# SBP-2 support (for storage devices) requires SCSI
#
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
CONFIG_VETH=m
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
# CONFIG_R8169 is not set
CONFIG_SIS190=m
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_QLA3XXX=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
# CONFIG_CHELSIO_T1_NAPI is not set
CONFIG_CHELSIO_T3=y
CONFIG_IXGBE=m
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_MYRI10GE=y
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=y
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=m
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_USBNET_MII is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_PC300TOO=m
CONFIG_FARSYNC=y
# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
# CONFIG_FDDI is not set
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=y
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=y
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_MCA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=y
CONFIG_RTC=m
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
CONFIG_R3964=m
CONFIG_APPLICOM=y
CONFIG_MWAVE=m
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_TLE62X0=m
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=y
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_DVB_TTUSB_DEC=m
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
#
# DVB-T (terrestrial) frontends
#
#
# DVB-C (cable) frontends
#
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
#
# Tuners/PLL support
#
#
# Miscellaneous devices
#
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_HECUBA=m
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=m
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=y
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
CONFIG_FB_VIRTUAL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m
CONFIG_BACKLIGHT_PROGEAR=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
# CONFIG_FONT_7x14 is not set
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
CONFIG_FONT_SUN12x22=y
CONFIG_FONT_10x18=y
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_EDGEPORT=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_HP4X=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
#
# USB DSL modem support
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=m
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_SDIO_UART=m
#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_WBSD is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_AUXDISPLAY=y
CONFIG_VIRTUALIZATION=y
#
# Userspace I/O
#
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V1=m
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
#
# Miscellaneous filesystems
#
CONFIG_HFSPLUS_FS=y
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=m
# CONFIG_UFS_DEBUG is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MARKERS=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
On Thu, 1 Nov 2007 20:24:54 +0100 Toralf F?rster wrote:
[adding netdev]
> Hello,
>
> the build with the attached .config failed, make ends with:
> ...
> CC arch/x86/lib/usercopy_32.o
> AR arch/x86/lib/lib.a
> GEN .version
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> LD init/built-in.o
> LD .tmp_vmlinux1
> drivers/built-in.o: In function `usbnet_set_settings':
> (.text+0xf1876): undefined reference to `mii_ethtool_sset'
> drivers/built-in.o: In function `usbnet_get_settings':
> (.text+0xf1836): undefined reference to `mii_ethtool_gset'
> drivers/built-in.o: In function `usbnet_get_link':
> (.text+0xf18d6): undefined reference to `mii_link_ok'
> drivers/built-in.o: In function `usbnet_nway_reset':
> (.text+0xf18f6): undefined reference to `mii_nway_restart'
> make: *** [.tmp_vmlinux1] Error 1
The MII functions aren't available unless NET_ETHERNET=y.
Howver, the MII functions aren't always needed...
David, any ideas on this one?
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
+ depends on NET_ETHERNET if USB_USBNET_MII != n
select MII if USB_USBNET_MII != n
would be handy. But invalid.
Hm, wait. Haven't we seen this before and decided that MII should
be made more generally available? I.e., not depend on NET_ETHERNET?
> The build was made with :
> $> make mrproper && make rndconfig && <tweak config file> && make oldconfig && make
>
> Here's the config:
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.24-rc1
> # Thu Nov 1 19:33:29 2007
> #
> CONFIG_X86_32=y
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_QUICKLIST=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_DMI=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> # General setup
> #
> # CONFIG_EXPERIMENTAL is not set
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> # CONFIG_TASKSTATS is not set
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> CONFIG_CGROUP_NS=y
> # CONFIG_CGROUP_CPUACCT is not set
> # CONFIG_FAIR_GROUP_SCHED is not set
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_RELAY=y
> # CONFIG_BLK_DEV_INITRD is not set
> CONFIG_SYSCTL=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_ANON_INODES=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLAB=y
> # CONFIG_SLUB is not set
> # CONFIG_SLOB is not set
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> # CONFIG_KMOD is not set
> CONFIG_BLOCK=y
> # CONFIG_LBD is not set
> CONFIG_BLK_DEV_IO_TRACE=y
> # CONFIG_LSF is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> # CONFIG_IOSCHED_DEADLINE is not set
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> # CONFIG_DEFAULT_CFQ is not set
> CONFIG_DEFAULT_NOOP=y
> CONFIG_DEFAULT_IOSCHED="noop"
>
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> # CONFIG_HIGH_RES_TIMERS is not set
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> # CONFIG_SMP is not set
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
> CONFIG_PARAVIRT_GUEST=y
> # CONFIG_XEN is not set
> # CONFIG_VMI is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUMM=y
> # CONFIG_MCORE2 is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_XADD=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> # CONFIG_ARCH_HAS_ILOG2_U32 is not set
> # CONFIG_ARCH_HAS_ILOG2_U64 is not set
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=4
> CONFIG_HPET_TIMER=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> # CONFIG_PREEMPT_BKL is not set
> # CONFIG_X86_UP_APIC is not set
> # CONFIG_X86_MCE is not set
> CONFIG_VM86=y
> CONFIG_TOSHIBA=m
> CONFIG_I8K=m
> CONFIG_X86_REBOOTFIXUPS=y
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> # CONFIG_X86_CPUID is not set
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> CONFIG_DELL_RBU=y
> CONFIG_DCDBAS=y
> # CONFIG_DMIID is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> CONFIG_PAGE_OFFSET=0xC0000000
> CONFIG_X86_PAE=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> # CONFIG_SPARSEMEM_STATIC is not set
> # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_RESOURCES_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_NR_QUICK=1
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MATH_EMULATION=y
> CONFIG_MTRR=y
> # CONFIG_SECCOMP is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_300=y
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=300
> # CONFIG_KEXEC is not set
> CONFIG_PHYSICAL_START=0x100000
> CONFIG_PHYSICAL_ALIGN=0x100000
> # CONFIG_COMPAT_VDSO is not set
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_PM_SLEEP=y
> CONFIG_SUSPEND_UP_POSSIBLE=y
> # CONFIG_SUSPEND is not set
> CONFIG_HIBERNATION_UP_POSSIBLE=y
> CONFIG_HIBERNATION=y
> CONFIG_PM_STD_PARTITION=""
> # CONFIG_ACPI is not set
> # CONFIG_APM is not set
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
> # CONFIG_CPU_IDLE is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> CONFIG_PCI_GOMMCONFIG=y
> # CONFIG_PCI_GODIRECT is not set
> # CONFIG_PCI_GOANY is not set
> CONFIG_PCI_DOMAINS=y
> # CONFIG_PCIEPORTBUS is not set
> # CONFIG_ARCH_SUPPORTS_MSI is not set
> CONFIG_ISA_DMA_API=y
> # CONFIG_ISA is not set
> CONFIG_MCA=y
> # CONFIG_MCA_LEGACY is not set
> CONFIG_SCx200=m
> CONFIG_SCx200HR_TIMER=m
> CONFIG_K8_NB=y
> # CONFIG_PCCARD is not set
>
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=y
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=m
> # CONFIG_PACKET_MMAP is not set
> CONFIG_UNIX=m
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> CONFIG_NET_KEY=m
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> # CONFIG_IP_MULTIPLE_TABLES is not set
> CONFIG_IP_ROUTE_MULTIPATH=y
> # CONFIG_IP_ROUTE_VERBOSE is not set
> CONFIG_IP_PNP=y
> # CONFIG_IP_PNP_DHCP is not set
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=y
> CONFIG_INET_IPCOMP=y
> CONFIG_INET_XFRM_TUNNEL=y
> CONFIG_INET_TUNNEL=y
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=m
> CONFIG_TCP_CONG_CUBIC=m
> # CONFIG_TCP_CONG_WESTWOOD is not set
> CONFIG_TCP_CONG_HTCP=y
> # CONFIG_DEFAULT_BIC is not set
> # CONFIG_DEFAULT_CUBIC is not set
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> CONFIG_DEFAULT_RENO=y
> CONFIG_DEFAULT_TCP_CONG="reno"
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> # CONFIG_INET6_AH is not set
> CONFIG_INET6_ESP=y
> CONFIG_INET6_IPCOMP=y
> CONFIG_INET6_XFRM_TUNNEL=y
> CONFIG_INET6_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET6_XFRM_MODE_BEET is not set
> # CONFIG_IPV6_SIT is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_NETWORK_SECMARK is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> # CONFIG_BRIDGE_NETFILTER is not set
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=y
> CONFIG_NETFILTER_NETLINK_QUEUE=y
> # CONFIG_NETFILTER_NETLINK_LOG is not set
> CONFIG_NF_CONNTRACK_ENABLED=m
> CONFIG_NF_CONNTRACK=m
> # CONFIG_NF_CT_ACCT is not set
> CONFIG_NF_CONNTRACK_MARK=y
> # CONFIG_NF_CONNTRACK_AMANDA is not set
> CONFIG_NF_CONNTRACK_FTP=m
> # CONFIG_NF_CONNTRACK_IRC is not set
> # CONFIG_NF_CONNTRACK_PPTP is not set
> CONFIG_NF_CONNTRACK_TFTP=m
> CONFIG_NETFILTER_XTABLES=y
> # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
> CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
> CONFIG_NETFILTER_XT_TARGET_TRACE=m
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> CONFIG_NETFILTER_XT_MATCH_COMMENT=y
> # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
> # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
> CONFIG_NETFILTER_XT_MATCH_DSCP=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
> # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
> # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
> # CONFIG_NETFILTER_XT_MATCH_MAC is not set
> CONFIG_NETFILTER_XT_MATCH_MARK=y
> CONFIG_NETFILTER_XT_MATCH_POLICY=y
> # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> # CONFIG_NETFILTER_XT_MATCH_REALM is not set
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> CONFIG_NETFILTER_XT_MATCH_TIME=m
> CONFIG_NETFILTER_XT_MATCH_U32=m
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_CONNTRACK_IPV4=m
> CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_IPRANGE=m
> # CONFIG_IP_NF_MATCH_TOS is not set
> # CONFIG_IP_NF_MATCH_RECENT is not set
> # CONFIG_IP_NF_MATCH_ECN is not set
> # CONFIG_IP_NF_MATCH_AH is not set
> # CONFIG_IP_NF_MATCH_TTL is not set
> # CONFIG_IP_NF_MATCH_OWNER is not set
> # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
> # CONFIG_IP_NF_FILTER is not set
> CONFIG_IP_NF_TARGET_LOG=m
> # CONFIG_IP_NF_TARGET_ULOG is not set
> CONFIG_NF_NAT=m
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> # CONFIG_IP_NF_TARGET_NETMAP is not set
> # CONFIG_IP_NF_TARGET_SAME is not set
> CONFIG_NF_NAT_FTP=m
> # CONFIG_NF_NAT_IRC is not set
> CONFIG_NF_NAT_TFTP=m
> # CONFIG_NF_NAT_AMANDA is not set
> # CONFIG_NF_NAT_PPTP is not set
> # CONFIG_NF_NAT_H323 is not set
> # CONFIG_NF_NAT_SIP is not set
> # CONFIG_IP_NF_MANGLE is not set
> CONFIG_IP_NF_RAW=m
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=m
> # CONFIG_IP_NF_ARP_MANGLE is not set
>
> #
> # Bridge: Netfilter Configuration
> #
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> # CONFIG_BRIDGE_EBT_802_3 is not set
> # CONFIG_BRIDGE_EBT_AMONG is not set
> CONFIG_BRIDGE_EBT_ARP=m
> # CONFIG_BRIDGE_EBT_IP is not set
> # CONFIG_BRIDGE_EBT_LIMIT is not set
> # CONFIG_BRIDGE_EBT_MARK is not set
> CONFIG_BRIDGE_EBT_PKTTYPE=m
> CONFIG_BRIDGE_EBT_STP=m
> # CONFIG_BRIDGE_EBT_VLAN is not set
> # CONFIG_BRIDGE_EBT_ARPREPLY is not set
> # CONFIG_BRIDGE_EBT_DNAT is not set
> CONFIG_BRIDGE_EBT_MARK_T=m
> # CONFIG_BRIDGE_EBT_REDIRECT is not set
> CONFIG_BRIDGE_EBT_SNAT=m
> # CONFIG_BRIDGE_EBT_LOG is not set
> CONFIG_BRIDGE_EBT_ULOG=m
> CONFIG_BRIDGE=m
> CONFIG_VLAN_8021Q=m
> CONFIG_DECNET=y
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> CONFIG_IPX=y
> # CONFIG_IPX_INTERN is not set
> # CONFIG_ATALK is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> # CONFIG_NET_SCH_CBQ is not set
> # CONFIG_NET_SCH_HTB is not set
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_PRIO=y
> CONFIG_NET_SCH_RR=m
> # CONFIG_NET_SCH_RED is not set
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=y
> CONFIG_NET_SCH_GRED=m
> # CONFIG_NET_SCH_DSMARK is not set
> # CONFIG_NET_SCH_NETEM is not set
> CONFIG_NET_SCH_INGRESS=m
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=y
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> # CONFIG_NET_CLS_U32 is not set
> CONFIG_NET_CLS_RSVP=y
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=y
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=y
> # CONFIG_NET_EMATCH_TEXT is not set
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=y
> CONFIG_NET_ACT_GACT=m
> # CONFIG_GACT_PROB is not set
> # CONFIG_NET_ACT_MIRRED is not set
> # CONFIG_NET_ACT_IPT is not set
> CONFIG_NET_ACT_NAT=m
> # CONFIG_NET_ACT_PEDIT is not set
> # CONFIG_NET_ACT_SIMP is not set
> CONFIG_NET_CLS_POLICE=y
> # CONFIG_NET_CLS_IND is not set
> CONFIG_NET_SCH_FIFO=y
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=y
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> CONFIG_BT=y
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> # CONFIG_BT_RFCOMM is not set
> # CONFIG_BT_BNEP is not set
> # CONFIG_BT_HIDP is not set
>
> #
> # Bluetooth device drivers
> #
> # CONFIG_BT_HCIUSB is not set
> # CONFIG_BT_HCIBTSDIO is not set
> CONFIG_BT_HCIUART=y
> # CONFIG_BT_HCIUART_H4 is not set
> CONFIG_BT_HCIUART_BCSP=y
> CONFIG_BT_HCIUART_LL=y
> # CONFIG_BT_HCIBCM203X is not set
> CONFIG_BT_HCIBPA10X=m
> CONFIG_BT_HCIBFUSB=m
> CONFIG_BT_HCIVHCI=y
>
> #
> # Wireless
> #
> CONFIG_CFG80211=m
> CONFIG_NL80211=y
> CONFIG_WIRELESS_EXT=y
> # CONFIG_IEEE80211 is not set
> CONFIG_RFKILL=m
> # CONFIG_RFKILL_INPUT is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=m
> # CONFIG_MTD is not set
> CONFIG_PARPORT=y
> # CONFIG_PARPORT_PC is not set
> # CONFIG_PARPORT_GSC is not set
> CONFIG_PARPORT_AX88796=m
> CONFIG_PARPORT_1284=y
> CONFIG_PARPORT_NOT_PC=y
> # CONFIG_BLK_DEV is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_PHANTOM is not set
> CONFIG_EEPROM_93CX6=y
> CONFIG_SGI_IOC4=m
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=m
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> CONFIG_BLK_DEV_HD_IDE=y
> # CONFIG_BLK_DEV_IDEDISK is not set
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_BLK_DEV_IDECD is not set
> CONFIG_BLK_DEV_IDEFLOPPY=m
> CONFIG_IDE_TASK_IOCTL=y
> # CONFIG_IDE_PROC_FS is not set
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_IDE_GENERIC is not set
> # CONFIG_BLK_DEV_PLATFORM is not set
> # CONFIG_BLK_DEV_CMD640 is not set
>
> #
> # PCI IDE chipsets support
> #
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_IDEPCI_SHARE_IRQ is not set
> # CONFIG_IDEPCI_PCIBUS_ORDER is not set
> CONFIG_BLK_DEV_OFFBOARD=y
> # CONFIG_BLK_DEV_GENERIC is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> CONFIG_BLK_DEV_ALI15X3=m
> CONFIG_WDC_ALI15X3=y
> CONFIG_BLK_DEV_AMD74XX=m
> CONFIG_BLK_DEV_ATIIXP=m
> CONFIG_BLK_DEV_CMD64X=m
> # CONFIG_BLK_DEV_TRIFLEX is not set
> CONFIG_BLK_DEV_CY82C693=m
> # CONFIG_BLK_DEV_CS5530 is not set
> CONFIG_BLK_DEV_CS5535=m
> CONFIG_BLK_DEV_HPT34X=m
> CONFIG_BLK_DEV_HPT366=m
> CONFIG_BLK_DEV_JMICRON=m
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=m
> # CONFIG_BLK_DEV_IT8213 is not set
> # CONFIG_BLK_DEV_IT821X is not set
> CONFIG_BLK_DEV_NS87415=m
> CONFIG_BLK_DEV_PDC202XX_OLD=m
> # CONFIG_PDC202XX_BURST is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> CONFIG_BLK_DEV_SVWKS=m
> CONFIG_BLK_DEV_SIIMAGE=m
> CONFIG_BLK_DEV_SIS5513=m
> CONFIG_BLK_DEV_SLC90E66=m
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_BLK_DEV_TC86C001 is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDE_ARCH_OBSOLETE_INIT=y
> CONFIG_BLK_DEV_HD=y
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=y
> # CONFIG_SCSI is not set
> # CONFIG_SCSI_DMA is not set
> # CONFIG_SCSI_NETLINK is not set
> # CONFIG_ATA is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=m
> # CONFIG_MD_LINEAR is not set
> CONFIG_MD_RAID0=m
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID456 is not set
> CONFIG_MD_MULTIPATH=m
> CONFIG_MD_FAULTY=m
> # CONFIG_BLK_DEV_DM is not set
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # An alternative FireWire stack is available with EXPERIMENTAL=y
> #
> CONFIG_IEEE1394=m
>
> #
> # Subsystem Options
> #
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
>
> #
> # Controllers
> #
>
> #
> # Texas Instruments PCILynx requires I2C
> #
> CONFIG_IEEE1394_OHCI1394=m
>
> #
> # Protocols
> #
> # CONFIG_IEEE1394_VIDEO1394 is not set
>
> #
> # SBP-2 support (for storage devices) requires SCSI
> #
> # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
> # CONFIG_IEEE1394_DV1394 is not set
> CONFIG_IEEE1394_RAWIO=m
> # CONFIG_I2O is not set
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_NETDEVICES_MULTIQUEUE=y
> CONFIG_IFB=m
> CONFIG_DUMMY=m
> CONFIG_BONDING=y
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> CONFIG_VETH=m
> # CONFIG_ARCNET is not set
> # CONFIG_NET_ETHERNET is not set
> CONFIG_MII=m
> CONFIG_NETDEV_1000=y
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=m
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_E1000E is not set
> CONFIG_NS83820=m
> CONFIG_HAMACHI=m
> # CONFIG_R8169 is not set
> CONFIG_SIS190=m
> CONFIG_SKGE=y
> # CONFIG_SKGE_DEBUG is not set
> CONFIG_SKY2=m
> # CONFIG_SKY2_DEBUG is not set
> CONFIG_SK98LIN=m
> # CONFIG_VIA_VELOCITY is not set
> CONFIG_TIGON3=y
> CONFIG_BNX2=y
> CONFIG_QLA3XXX=m
> CONFIG_NETDEV_10000=y
> CONFIG_CHELSIO_T1=m
> CONFIG_CHELSIO_T1_1G=y
> # CONFIG_CHELSIO_T1_NAPI is not set
> CONFIG_CHELSIO_T3=y
> CONFIG_IXGBE=m
> CONFIG_IXGB=y
> CONFIG_S2IO=y
> CONFIG_MYRI10GE=y
> # CONFIG_NETXEN_NIC is not set
> CONFIG_NIU=y
> # CONFIG_MLX4_CORE is not set
> CONFIG_TEHUTI=m
> # CONFIG_TR is not set
>
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
>
> #
> # USB Network Adapters
> #
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_USBNET_MII is not set
> CONFIG_USB_USBNET=y
> CONFIG_USB_NET_CDCETHER=m
> # CONFIG_USB_NET_DM9601 is not set
> CONFIG_USB_NET_GL620A=m
> CONFIG_USB_NET_NET1080=y
> # CONFIG_USB_NET_MCS7830 is not set
> # CONFIG_USB_NET_CDC_SUBSET is not set
> CONFIG_USB_NET_ZAURUS=m
> CONFIG_WAN=y
> CONFIG_LANMEDIA=y
> CONFIG_HDLC=y
> CONFIG_HDLC_RAW=m
> CONFIG_HDLC_RAW_ETH=m
> CONFIG_HDLC_CISCO=m
> # CONFIG_HDLC_FR is not set
> # CONFIG_HDLC_PPP is not set
>
> #
> # X.25/LAPB support is disabled
> #
> CONFIG_PCI200SYN=m
> CONFIG_WANXL=m
> CONFIG_PC300=y
>
> #
> # Cyclades-PC300 MLPPP support is disabled.
> #
>
> #
> # Refer to the file README.mlppp, provided by PC300 package.
> #
> CONFIG_PC300TOO=m
> CONFIG_FARSYNC=y
> # CONFIG_DSCC4 is not set
> CONFIG_DLCI=y
> CONFIG_DLCI_MAX=8
> CONFIG_SBNI=m
> CONFIG_SBNI_MULTILINE=y
> # CONFIG_FDDI is not set
> CONFIG_PLIP=y
> # CONFIG_PPP is not set
> CONFIG_SLIP=y
> # CONFIG_SLIP_COMPRESSED is not set
> # CONFIG_SLIP_SMART is not set
> # CONFIG_SLIP_MODE_SLIP6 is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_ISDN is not set
> CONFIG_PHONE=y
> CONFIG_PHONE_IXJ=m
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=m
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=y
> CONFIG_INPUT_EVBUG=m
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> CONFIG_KEYBOARD_XTKBD=m
> CONFIG_KEYBOARD_NEWTON=m
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=m
> # CONFIG_SERIO_CT82C710 is not set
> CONFIG_SERIO_PARKBD=m
> CONFIG_SERIO_PCIPS2=m
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> CONFIG_GAMEPORT=y
> CONFIG_GAMEPORT_NS558=y
> # CONFIG_GAMEPORT_L4 is not set
> # CONFIG_GAMEPORT_EMU10K1 is not set
> # CONFIG_GAMEPORT_FM801 is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> CONFIG_SERIAL_NONSTANDARD=y
> CONFIG_COMPUTONE=y
> # CONFIG_ROCKETPORT is not set
> CONFIG_CYCLADES=y
> # CONFIG_DIGIEPCA is not set
> CONFIG_MOXA_INTELLIO=m
> # CONFIG_MOXA_SMARTIO is not set
> CONFIG_MOXA_SMARTIO_NEW=m
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINK is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_SYNCLINK_GT is not set
> # CONFIG_N_HDLC is not set
> CONFIG_RISCOM8=y
> CONFIG_SPECIALIX=y
> # CONFIG_SPECIALIX_RTSCTS is not set
> CONFIG_SX=m
> # CONFIG_RIO is not set
> CONFIG_STALDRV=y
> # CONFIG_STALLION is not set
> CONFIG_ISTALLION=m
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=m
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=m
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> # CONFIG_SERIAL_8250_MANY_PORTS is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> # CONFIG_SERIAL_8250_RSA is not set
> # CONFIG_SERIAL_8250_MCA is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=m
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_PRINTER=m
> # CONFIG_LP_CONSOLE is not set
> CONFIG_PPDEV=m
> CONFIG_TIPAR=y
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_INTEL=m
> # CONFIG_HW_RANDOM_AMD is not set
> CONFIG_HW_RANDOM_GEODE=y
> CONFIG_HW_RANDOM_VIA=m
> CONFIG_NVRAM=y
> CONFIG_RTC=m
> CONFIG_GEN_RTC=y
> # CONFIG_GEN_RTC_X is not set
> CONFIG_R3964=m
> CONFIG_APPLICOM=y
> CONFIG_MWAVE=m
> # CONFIG_SCx200_GPIO is not set
> CONFIG_PC8736x_GPIO=m
> CONFIG_NSC_GPIO=m
> CONFIG_CS5535_GPIO=y
> CONFIG_RAW_DRIVER=m
> CONFIG_MAX_RAW_DEVS=256
> CONFIG_HANGCHECK_TIMER=m
> CONFIG_DEVPORT=y
> # CONFIG_I2C is not set
>
> #
> # SPI support
> #
> CONFIG_SPI=y
> CONFIG_SPI_MASTER=y
>
> #
> # SPI Master Controller Drivers
> #
>
> #
> # SPI Protocol Masters
> #
> CONFIG_SPI_AT25=m
> CONFIG_SPI_TLE62X0=m
> CONFIG_W1=y
> CONFIG_W1_CON=y
>
> #
> # 1-wire Bus Masters
> #
> CONFIG_W1_MASTER_MATROX=y
> # CONFIG_W1_MASTER_DS2490 is not set
>
> #
> # 1-wire Slaves
> #
> # CONFIG_W1_SLAVE_THERM is not set
> CONFIG_W1_SLAVE_SMEM=m
> # CONFIG_W1_SLAVE_DS2433 is not set
> CONFIG_W1_SLAVE_DS2760=y
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> CONFIG_BATTERY_DS2760=y
> # CONFIG_HWMON is not set
> # CONFIG_WATCHDOG is not set
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB_POSSIBLE=y
> CONFIG_SSB=m
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> # CONFIG_SSB_DRIVER_PCICORE is not set
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_SM501 is not set
>
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L1=y
> CONFIG_VIDEO_V4L1_COMPAT=y
> CONFIG_VIDEO_V4L2=y
> # CONFIG_VIDEO_CAPTURE_DRIVERS is not set
> # CONFIG_RADIO_ADAPTERS is not set
> CONFIG_DVB_CORE=y
> CONFIG_DVB_CORE_ATTACH=y
> CONFIG_DVB_CAPTURE_DRIVERS=y
> CONFIG_DVB_TTUSB_DEC=m
> # CONFIG_DVB_CINERGYT2 is not set
>
> #
> # Supported DVB Frontends
> #
>
> #
> # Customise DVB Frontends
> #
> # CONFIG_DVB_FE_CUSTOMISE is not set
>
> #
> # DVB-S (satellite) frontends
> #
>
> #
> # DVB-T (terrestrial) frontends
> #
>
> #
> # DVB-C (cable) frontends
> #
>
> #
> # ATSC (North American/Korean Terrestrial/Cable DTV) frontends
> #
>
> #
> # Tuners/PLL support
> #
>
> #
> # Miscellaneous devices
> #
> # CONFIG_DAB is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_ALI=y
> CONFIG_AGP_ATI=m
> CONFIG_AGP_AMD=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_AGP_EFFICEON=y
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_I830=m
> CONFIG_DRM_I915=m
> CONFIG_DRM_MGA=y
> # CONFIG_DRM_SIS is not set
> CONFIG_DRM_VIA=m
> CONFIG_DRM_SAVAGE=m
> CONFIG_VGASTATE=y
> # CONFIG_VIDEO_OUTPUT_CONTROL is not set
> CONFIG_FB=y
> # CONFIG_FIRMWARE_EDID is not set
> # CONFIG_FB_DDC is not set
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> CONFIG_FB_SYS_FILLRECT=y
> CONFIG_FB_SYS_COPYAREA=y
> CONFIG_FB_SYS_IMAGEBLIT=y
> CONFIG_FB_SYS_FOPS=y
> CONFIG_FB_DEFERRED_IO=y
> CONFIG_FB_SVGALIB=m
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> CONFIG_FB_CYBER2000=y
> # CONFIG_FB_ARC is not set
> CONFIG_FB_ASILIANT=y
> # CONFIG_FB_IMSTT is not set
> CONFIG_FB_VGA16=m
> # CONFIG_FB_UVESA is not set
> # CONFIG_FB_VESA is not set
> CONFIG_FB_HECUBA=m
> # CONFIG_FB_HGA is not set
> CONFIG_FB_S1D13XXX=y
> # CONFIG_FB_NVIDIA is not set
> # CONFIG_FB_RIVA is not set
> CONFIG_FB_LE80578=y
> CONFIG_FB_CARILLO_RANCH=m
> CONFIG_FB_MATROX=y
> CONFIG_FB_MATROX_MILLENIUM=y
> CONFIG_FB_MATROX_MYSTIQUE=y
> CONFIG_FB_MATROX_G=y
> # CONFIG_FB_MATROX_I2C is not set
> CONFIG_FB_MATROX_MULTIHEAD=y
> # CONFIG_FB_RADEON is not set
> CONFIG_FB_ATY128=y
> CONFIG_FB_ATY128_BACKLIGHT=y
> CONFIG_FB_ATY=m
> CONFIG_FB_ATY_CT=y
> # CONFIG_FB_ATY_GENERIC_LCD is not set
> # CONFIG_FB_ATY_GX is not set
> CONFIG_FB_ATY_BACKLIGHT=y
> CONFIG_FB_S3=m
> # CONFIG_FB_SIS is not set
> CONFIG_FB_NEOMAGIC=y
> CONFIG_FB_KYRO=y
> CONFIG_FB_3DFX=m
> # CONFIG_FB_VOODOO1 is not set
> CONFIG_FB_VT8623=m
> CONFIG_FB_CYBLA=y
> CONFIG_FB_TRIDENT=m
> # CONFIG_FB_ARK is not set
> CONFIG_FB_VIRTUAL=y
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> # CONFIG_LCD_CLASS_DEVICE is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> CONFIG_BACKLIGHT_CORGI=m
> CONFIG_BACKLIGHT_PROGEAR=y
>
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> CONFIG_FONTS=y
> # CONFIG_FONT_8x8 is not set
> CONFIG_FONT_8x16=y
> CONFIG_FONT_6x11=y
> # CONFIG_FONT_7x14 is not set
> CONFIG_FONT_PEARL_8x8=y
> CONFIG_FONT_ACORN_8x8=y
> CONFIG_FONT_MINI_4x6=y
> # CONFIG_FONT_SUN8x16 is not set
> CONFIG_FONT_SUN12x22=y
> CONFIG_FONT_10x18=y
> # CONFIG_LOGO is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
>
> #
> # Advanced Linux Sound Architecture
> #
> # CONFIG_SND is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> CONFIG_HID_DEBUG=y
> # CONFIG_HIDRAW is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT_POWERBOOK=y
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_DEVICE_CLASS=y
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> # CONFIG_USB_ISP116X_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> # CONFIG_USB_UHCI_HCD is not set
> # CONFIG_USB_U132_HCD is not set
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=y
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Imaging devices
> #
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=y
>
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=y
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_AIRPRIME=m
> CONFIG_USB_SERIAL_BELKIN=y
> CONFIG_USB_SERIAL_CH341=m
> # CONFIG_USB_SERIAL_WHITEHEAT is not set
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
> CONFIG_USB_SERIAL_EMPEG=y
> CONFIG_USB_SERIAL_FUNSOFT=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
> CONFIG_USB_SERIAL_GARMIN=y
> # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> CONFIG_USB_SERIAL_KEYSPAN=y
> CONFIG_USB_SERIAL_KEYSPAN_MPR=y
> # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
> CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
> CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
> CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
> # CONFIG_USB_SERIAL_KOBIL_SCT is not set
> CONFIG_USB_SERIAL_MCT_U232=y
> # CONFIG_USB_SERIAL_MOS7720 is not set
> CONFIG_USB_SERIAL_MOS7840=m
> CONFIG_USB_SERIAL_NAVMAN=m
> # CONFIG_USB_SERIAL_PL2303 is not set
> CONFIG_USB_SERIAL_OTI6858=y
> CONFIG_USB_SERIAL_HP4X=y
> CONFIG_USB_SERIAL_SIERRAWIRELESS=m
> CONFIG_USB_SERIAL_TI=m
> CONFIG_USB_SERIAL_XIRCOM=m
> CONFIG_USB_SERIAL_OPTION=y
> # CONFIG_USB_SERIAL_DEBUG is not set
> CONFIG_USB_EZUSB=y
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> CONFIG_USB_EMI26=y
> CONFIG_USB_LCD=m
> CONFIG_USB_BERRY_CHARGE=y
> CONFIG_USB_LED=y
> CONFIG_USB_CYPRESS_CY7C63=m
> CONFIG_USB_CYTHERM=m
> # CONFIG_USB_PHIDGET is not set
> CONFIG_USB_IDMOUSE=m
> CONFIG_USB_FTDI_ELAN=y
> CONFIG_USB_APPLEDISPLAY=y
> CONFIG_USB_SISUSBVGA=m
> # CONFIG_USB_SISUSBVGA_CON is not set
> CONFIG_USB_LD=m
> # CONFIG_USB_TRANCEVIBRATOR is not set
> CONFIG_USB_IOWARRIOR=m
>
> #
> # USB DSL modem support
> #
>
> #
> # USB Gadget Support
> #
> CONFIG_USB_GADGET=m
> # CONFIG_USB_GADGET_DEBUG_FILES is not set
> # CONFIG_USB_GADGET_DEBUG_FS is not set
> CONFIG_USB_GADGET_SELECTED=y
> # CONFIG_USB_GADGET_AMD5536UDC is not set
> # CONFIG_USB_GADGET_ATMEL_USBA is not set
> # CONFIG_USB_GADGET_FSL_USB2 is not set
> # CONFIG_USB_GADGET_NET2280 is not set
> # CONFIG_USB_GADGET_PXA2XX is not set
> CONFIG_USB_GADGET_M66592=y
> CONFIG_USB_M66592=m
> # CONFIG_USB_GADGET_GOKU is not set
> # CONFIG_USB_GADGET_LH7A40X is not set
> # CONFIG_USB_GADGET_OMAP is not set
> # CONFIG_USB_GADGET_S3C2410 is not set
> # CONFIG_USB_GADGET_AT91 is not set
> # CONFIG_USB_GADGET_DUMMY_HCD is not set
> CONFIG_USB_GADGET_DUALSPEED=y
> # CONFIG_USB_ZERO is not set
> # CONFIG_USB_ETH is not set
> # CONFIG_USB_GADGETFS is not set
> # CONFIG_USB_FILE_STORAGE is not set
> CONFIG_USB_G_SERIAL=m
> # CONFIG_USB_MIDI_GADGET is not set
> CONFIG_MMC=m
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_UNSAFE_RESUME is not set
>
> #
> # MMC/SD Card Drivers
> #
> CONFIG_MMC_BLOCK=m
> # CONFIG_MMC_BLOCK_BOUNCE is not set
> CONFIG_SDIO_UART=m
>
> #
> # MMC/SD Host Controller Drivers
> #
> # CONFIG_MMC_WBSD is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_INFINIBAND is not set
> # CONFIG_RTC_CLASS is not set
> # CONFIG_DMADEVICES is not set
> CONFIG_AUXDISPLAY=y
> CONFIG_VIRTUALIZATION=y
>
> #
> # Userspace I/O
> #
> CONFIG_UIO=y
> # CONFIG_UIO_CIF is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> # CONFIG_EXT2_FS_POSIX_ACL is not set
> # CONFIG_EXT2_FS_SECURITY is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=m
> # CONFIG_EXT3_FS_XATTR is not set
> CONFIG_JBD=m
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> CONFIG_REISERFS_FS_XATTR=y
> # CONFIG_REISERFS_FS_POSIX_ACL is not set
> # CONFIG_REISERFS_FS_SECURITY is not set
> CONFIG_JFS_FS=y
> CONFIG_JFS_POSIX_ACL=y
> # CONFIG_JFS_SECURITY is not set
> # CONFIG_JFS_DEBUG is not set
> CONFIG_JFS_STATISTICS=y
> CONFIG_FS_POSIX_ACL=y
> CONFIG_XFS_FS=m
> # CONFIG_XFS_QUOTA is not set
> CONFIG_XFS_SECURITY=y
> # CONFIG_XFS_POSIX_ACL is not set
> CONFIG_XFS_RT=y
> # CONFIG_OCFS2_FS is not set
> CONFIG_MINIX_FS=m
> # CONFIG_ROMFS_FS is not set
> # CONFIG_INOTIFY is not set
> CONFIG_QUOTA=y
> # CONFIG_QUOTA_NETLINK_INTERFACE is not set
> # CONFIG_PRINT_QUOTA_WARNING is not set
> CONFIG_QFMT_V1=m
> # CONFIG_QFMT_V2 is not set
> CONFIG_QUOTACTL=y
> CONFIG_DNOTIFY=y
> CONFIG_AUTOFS_FS=m
> CONFIG_AUTOFS4_FS=m
> # CONFIG_FUSE_FS is not set
> CONFIG_GENERIC_ACL=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> # CONFIG_JOLIET is not set
> CONFIG_ZISOFS=y
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_DEBUG is not set
> CONFIG_NTFS_RW=y
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> # CONFIG_PROC_KCORE is not set
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
>
> #
> # Miscellaneous filesystems
> #
> CONFIG_HFSPLUS_FS=y
> CONFIG_CRAMFS=m
> CONFIG_VXFS_FS=m
> # CONFIG_HPFS_FS is not set
> CONFIG_QNX4FS_FS=m
> CONFIG_SYSV_FS=y
> CONFIG_UFS_FS=m
> # CONFIG_UFS_DEBUG is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=m
> # CONFIG_NLS_CODEPAGE_737 is not set
> CONFIG_NLS_CODEPAGE_775=y
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=y
> CONFIG_NLS_CODEPAGE_855=y
> CONFIG_NLS_CODEPAGE_857=y
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> CONFIG_NLS_CODEPAGE_865=y
> # CONFIG_NLS_CODEPAGE_866 is not set
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=y
> CONFIG_NLS_CODEPAGE_950=y
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=y
> # CONFIG_NLS_CODEPAGE_874 is not set
> CONFIG_NLS_ISO8859_8=m
> # CONFIG_NLS_CODEPAGE_1250 is not set
> CONFIG_NLS_CODEPAGE_1251=m
> # CONFIG_NLS_ASCII is not set
> # CONFIG_NLS_ISO8859_1 is not set
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> CONFIG_NLS_ISO8859_6=y
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> CONFIG_NLS_ISO8859_13=y
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=y
> CONFIG_NLS_KOI8_U=y
> CONFIG_NLS_UTF8=y
> CONFIG_INSTRUMENTATION=y
> CONFIG_PROFILING=y
> CONFIG_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_MARKERS=y
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_MAGIC_SYSRQ=y
> CONFIG_UNUSED_SYMBOLS=y
> CONFIG_DEBUG_FS=y
> CONFIG_HEADERS_CHECK=y
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_SAMPLES is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_DOUBLEFAULT=y
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ABLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_NULL is not set
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> # CONFIG_CRYPTO_SHA256 is not set
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_WP512=m
> # CONFIG_CRYPTO_TGR192 is not set
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_PCBC=y
> CONFIG_CRYPTO_CRYPTD=y
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_FCRYPT=y
> CONFIG_CRYPTO_BLOWFISH=y
> CONFIG_CRYPTO_TWOFISH=y
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> # CONFIG_CRYPTO_TWOFISH_586 is not set
> CONFIG_CRYPTO_SERPENT=y
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_586=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=y
> CONFIG_CRYPTO_TEA=y
> # CONFIG_CRYPTO_ARC4 is not set
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_ANUBIS=y
> CONFIG_CRYPTO_SEED=m
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_MICHAEL_MIC=m
> CONFIG_CRYPTO_CRC32C=y
> # CONFIG_CRYPTO_CAMELLIA is not set
> CONFIG_CRYPTO_TEST=m
> # CONFIG_CRYPTO_AUTHENC is not set
> # CONFIG_CRYPTO_HW is not set
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_CRC_CCITT=m
> CONFIG_CRC16=m
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> CONFIG_AUDIT_GENERIC=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_KTIME_SCALAR=y
---
~Randy
All this USB_USBNET_MII trickery is simply not worth it considering how
few code it saves.
As a side effect, this also fixes the following compile error reported
by Toralf Förster:
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `usbnet_set_settings':
(.text+0xf1876): undefined reference to `mii_ethtool_sset'
drivers/built-in.o: In function `usbnet_get_settings':
(.text+0xf1836): undefined reference to `mii_ethtool_gset'
drivers/built-in.o: In function `usbnet_get_link':
(.text+0xf18d6): undefined reference to `mii_link_ok'
drivers/built-in.o: In function `usbnet_nway_reset':
(.text+0xf18f6): undefined reference to `mii_nway_restart'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/net/usb/Kconfig | 9 +--------
drivers/net/usb/usbnet.c | 7 -------
2 files changed, 1 insertion(+), 15 deletions(-)
3b7f6290c639b9042fead1698fdbe1c84132c953
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 5a96d74..a12c9c4 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -93,13 +93,9 @@ config USB_RTL8150
To compile this driver as a module, choose M here: the
module will be called rtl8150.
-config USB_USBNET_MII
- tristate
- default n
-
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select MII if USB_USBNET_MII != n
+ select MII
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -135,7 +131,6 @@ config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
- select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -190,7 +185,6 @@ config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
select CRC32
- select USB_USBNET_MII
help
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
@@ -225,7 +219,6 @@ config USB_NET_PLUSB
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
depends on USB_USBNET
- select USB_USBNET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index acd5f1c..8ed1fc5 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -683,9 +683,6 @@ done_nopm:
* they'll probably want to use this base set.
*/
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
-#define HAVE_MII
-
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -744,8 +741,6 @@ int usbnet_nway_reset(struct net_device *net)
}
EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-#endif /* HAVE_MII */
-
void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
struct usbnet *dev = netdev_priv(net);
@@ -776,12 +771,10 @@ EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
-#ifdef HAVE_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
-#endif
.get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
On Thursday 01 November 2007, Randy Dunlap wrote:
> The MII functions aren't available unless NET_ETHERNET=y.
> Howver, the MII functions aren't always needed...
>
> David, any ideas on this one?
It's been several years since I looked at this. It
used to behave just fine.
Something must have changed in the not-too-distant
past to have broken this mechanism...
> ?config USB_USBNET
> ? ? ? ? tristate "Multi-purpose USB Networking Framework"
> + ? ? ? depends on NET_ETHERNET if USB_USBNET_MII != n
> ? ? ? ? select MII if USB_USBNET_MII != n
>
> would be handy. ?But invalid.
>
> Hm, wait. ?Haven't we seen this before and decided that MII should
> be made more generally available? ?I.e., not depend on NET_ETHERNET?
Some of us keep wanting to see "select" work properly,
not omitting dependencies...
Re interdependencies MII and NET_ETHERNET, I'll leave
that up to the netedev folk.
- Dave
On Thu, Nov 01, 2007 at 04:32:18PM -0700, David Brownell wrote:
> On Thursday 01 November 2007, Randy Dunlap wrote:
> > The MII functions aren't available unless NET_ETHERNET=y.
The setting of CONFIG_NET_ETHERNET doesn't matter for this bug.
> > Howver, the MII functions aren't always needed...
> >
> > David, any ideas on this one?
>
> It's been several years since I looked at this. It
> used to behave just fine.
>
> Something must have changed in the not-too-distant
> past to have broken this mechanism...
>...
It seems to be an old bug.
The following combination of options is simply an unusual one:
CONFIG_MII=m
CONFIG_USB_USBNET=y
CONFIG_USB_USBNET_MII=n
> - Dave
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thursday 01 November 2007, Adrian Bunk wrote:
> All this USB_USBNET_MII trickery is simply not worth it considering how
> few code it saves.
Depends on what systems you're talking about. Forcing unused
code into the kernel is not free, especially if that's made into
a design policy and applied repeatedly to many subsystems.
> As a side effect, this also fixes the following compile error reported
> by Toralf F?rster:
Why not just fix the thing which changed and broke the build?
Or if reverse dependencies can't be made to work sanely, then
have those Ethernet-adapter minidrivers depend on NET_ETHERNET
and then select MII. (To make the relationships be simple
enough that current Kconfig can handle them.)
I have a fair number of usbnet devices. Not one of them needs
MII or NET_ETHERNET.
- Dave
On Thu, Nov 01, 2007 at 04:52:39PM -0700, David Brownell wrote:
> On Thursday 01 November 2007, Adrian Bunk wrote:
> > All this USB_USBNET_MII trickery is simply not worth it considering how
> > few code it saves.
>
> Depends on what systems you're talking about. Forcing unused
> code into the kernel is not free, especially if that's made into
> a design policy and applied repeatedly to many subsystems.
If it was turned into a design policy...
My impression is that in some parts of the kernel every byte gets
counted, while in other parts noone would notice a few kilobytes more or
less.
> > As a side effect, this also fixes the following compile error reported
> > by Toralf Förster:
>
> Why not just fix the thing which changed and broke the build?
Today it's exactly one year since your commit entered the tree.
Dear bug, happy birthday! ;-)
> Or if reverse dependencies can't be made to work sanely, then
> have those Ethernet-adapter minidrivers depend on NET_ETHERNET
> and then select MII. (To make the relationships be simple
> enough that current Kconfig can handle them.)
It's not Kconfig's fault that you test for the wrong variable in
usbnet.c ...
> I have a fair number of usbnet devices. Not one of them needs
> MII or NET_ETHERNET.
I don't understand why you think this bug was in any way related to
NET_ETHERNET - set NET_ETHERNET=y and the bug is still present.
If you insist on the #ifdef's take the patch below - it even saves a few
additional bytes if you have non-usbnet net drivers requiring MII
enabled statically or as modules in your .config but no usbnet drivers
requiring MII.
> - Dave
cu
Adrian
<-- snip -->
This patch fixes the following compile error with CONFIG_MII=m,
CONFIG_USB_USBNET=y, CONFIG_USB_USBNET_MII=n:
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o: In function `usbnet_set_settings':
(.text+0xf1876): undefined reference to `mii_ethtool_sset'
drivers/built-in.o: In function `usbnet_get_settings':
(.text+0xf1836): undefined reference to `mii_ethtool_gset'
drivers/built-in.o: In function `usbnet_get_link':
(.text+0xf18d6): undefined reference to `mii_link_ok'
drivers/built-in.o: In function `usbnet_nway_reset':
(.text+0xf18f6): undefined reference to `mii_nway_restart'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
This bug was introduced by commit 18ee91fa9815fa3bb4e51cdcb8229bd0a0f11a70
and reported by Toralf Förster.
Signed-off-by: Adrian Bunk <[email protected]>
---
BTW:
The Kconfig part of this patch is not really required, but testing for
#if defined(CONFIG_USB_USBNET_MII) || defined(CONFIG_USB_USBNET_MII_MODULE)
would look needlessly ugly.
drivers/net/usb/Kconfig | 5 ++---
drivers/net/usb/usbnet.c | 7 +++----
2 files changed, 5 insertions(+), 7 deletions(-)
a421e4910eb30b140a315e274632e87c7a218df6
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 5a96d74..9261371 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -94,12 +94,11 @@ config USB_RTL8150
module will be called rtl8150.
config USB_USBNET_MII
- tristate
- default n
+ bool
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select MII if USB_USBNET_MII != n
+ select MII if USB_USBNET_MII
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index acd5f1c..7393ab0 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -683,8 +683,7 @@ done_nopm:
* they'll probably want to use this base set.
*/
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
-#define HAVE_MII
+#ifdef CONFIG_USB_USBNET_MII
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
@@ -744,7 +743,7 @@ int usbnet_nway_reset(struct net_device *net)
}
EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-#endif /* HAVE_MII */
+#endif /* CONFIG_USB_USBNET_MII */
void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
@@ -776,7 +775,7 @@ EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
-#ifdef HAVE_MII
+#ifdef CONFIG_USB_USBNET_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.get_link = usbnet_get_link,
On Thursday 01 November 2007, Adrian Bunk wrote:
> The following combination of options is simply an unusual one:
>
> CONFIG_MII=m
> CONFIG_USB_USBNET=y
> CONFIG_USB_USBNET_MII=n
I though that had been fixed for ages ...
This should do a better job of it.
- Dave
========== CUT HERE
Simplify handling of the MII-dependent usbnet based adapters: stick
to forward dependencies, and explicitly handle the core dependency.
Signed-off-by: David Brownell <[email protected]>
---
drivers/net/usb/Kconfig | 23 ++++++++++++-----------
drivers/net/usb/usbnet.c | 9 ++++++++-
2 files changed, 20 insertions(+), 12 deletions(-)
--- a.orig/drivers/net/usb/Kconfig 2007-10-21 10:35:16.000000000 -0700
+++ a/drivers/net/usb/Kconfig 2007-11-02 11:32:15.000000000 -0700
@@ -93,13 +93,8 @@ config USB_RTL8150
To compile this driver as a module, choose M here: the
module will be called rtl8150.
-config USB_USBNET_MII
- tristate
- default n
-
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select MII if USB_USBNET_MII != n
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -131,11 +126,19 @@ config USB_USBNET
To compile this driver as a module, choose M here: the
module will be called usbnet.
+# usbnet core will support MII when MII is static, or both are modules
+config USB_NET_MII
+ tristate
+ depends on USB_USBNET && NET_ETHERNET && (MII = y || MII = USB_USBNET)
+ default MII
+
+comment "MII support is needed for most Ethernet adapters"
+ depends on USB_USBNET && USB_NET_MII=n
+
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
- depends on USB_USBNET && NET_ETHERNET
+ depends on USB_USBNET && USB_NET_MII
select CRC32
- select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -188,9 +191,8 @@ config USB_NET_CDCETHER
config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
- depends on USB_USBNET
+ depends on USB_USBNET && USB_NET_MII
select CRC32
- select USB_USBNET_MII
help
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
@@ -224,8 +226,7 @@ config USB_NET_PLUSB
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
- depends on USB_USBNET
- select USB_USBNET_MII
+ depends on USB_USBNET && USB_NET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
--- a.orig/drivers/net/usb/usbnet.c 2007-10-13 15:16:10.000000000 -0700
+++ a/drivers/net/usb/usbnet.c 2007-11-02 11:39:59.000000000 -0700
@@ -682,10 +682,17 @@ done_nopm:
/* ethtool methods; minidrivers may need to add some more, but
* they'll probably want to use this base set.
*/
+#undef HAVE_MII
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
+#if defined(CONFIG_MII)
#define HAVE_MII
+#elif defined(CONFIG_MII_MODULE) && defined(MODULE)
+#define HAVE_MII
+#endif
+
+#ifdef HAVE_MII
+
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
On Fri, Nov 02, 2007 at 11:45:15AM -0700, David Brownell wrote:
> On Thursday 01 November 2007, Adrian Bunk wrote:
> > The following combination of options is simply an unusual one:
> >
> > CONFIG_MII=m
> > CONFIG_USB_USBNET=y
> > CONFIG_USB_USBNET_MII=n
>
> I though that had been fixed for ages ...
>
> This should do a better job of it.
>
> - Dave
>
> ========== CUT HERE
> Simplify handling of the MII-dependent usbnet based adapters: stick
> to forward dependencies, and explicitly handle the core dependency.
>
> Signed-off-by: David Brownell <[email protected]>
> ---
> drivers/net/usb/Kconfig | 23 ++++++++++++-----------
> drivers/net/usb/usbnet.c | 9 ++++++++-
> 2 files changed, 20 insertions(+), 12 deletions(-)
>
> --- a.orig/drivers/net/usb/Kconfig 2007-10-21 10:35:16.000000000 -0700
> +++ a/drivers/net/usb/Kconfig 2007-11-02 11:32:15.000000000 -0700
> @@ -93,13 +93,8 @@ config USB_RTL8150
> To compile this driver as a module, choose M here: the
> module will be called rtl8150.
>
> -config USB_USBNET_MII
> - tristate
> - default n
> -
> config USB_USBNET
> tristate "Multi-purpose USB Networking Framework"
> - select MII if USB_USBNET_MII != n
> ---help---
> This driver supports several kinds of network links over USB,
> with "minidrivers" built around a common network driver core
> @@ -131,11 +126,19 @@ config USB_USBNET
> To compile this driver as a module, choose M here: the
> module will be called usbnet.
>
> +# usbnet core will support MII when MII is static, or both are modules
> +config USB_NET_MII
> + tristate
> + depends on USB_USBNET && NET_ETHERNET && (MII = y || MII = USB_USBNET)
> + default MII
> +
> +comment "MII support is needed for most Ethernet adapters"
> + depends on USB_USBNET && USB_NET_MII=n
>...
This approach has two disadvantages:
- it's complicated
- the MII stuff is an implementation detail, and we shouldn't bother
the user with it (especially since we can do better)
If you want to keep the #ifdef's, what's the problem with the second
patch I proposed to fix this bug?
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Friday 02 November 2007, Adrian Bunk wrote:
> This approach has two disadvantages:
> - it's complicated
No more so than the problem itself.
> - the MII stuff is an implementation detail, and we shouldn't bother
> ? the user with it (especially since we can do better)
That's a Kconfig policy that's not always followed. In this
case, I was getting fed up with "select". It so rarely does
what it needs to do, and I've started to think it'd be better
to just always avoid that fragility than battle it.
> If you want to keep the #ifdef's, what's the problem with the second
> patch I proposed to fix this bug?
For one thing, I didn't see it until after I posted this one...
other than that, the basic approach could well be fine; I didn't
go through it in detail.
But on the other hand, it seems that only the ASIX code will work
right; the DM9601 and MCS7830 Kconfig is different/wrong.
- Dave
On Fri, Nov 02, 2007 at 12:30:22PM -0700, David Brownell wrote:
> On Friday 02 November 2007, Adrian Bunk wrote:
> > This approach has two disadvantages:
> > - it's complicated
>
> No more so than the problem itself.
>
>
> > - the MII stuff is an implementation detail, and we shouldn't bother
> > the user with it (especially since we can do better)
>
> That's a Kconfig policy that's not always followed.
Sure it's not yet always followed.
But kernel developers have to become more aware that the vast majority
of kconfig users are not kernel hackers and act accordingly.
I'm not talking about the infamous Aunt Tillie, but being able to
build your own kernel is even required for LPIC-1. [1]
> In this
> case, I was getting fed up with "select". It so rarely does
> what it needs to do, and I've started to think it'd be better
> to just always avoid that fragility than battle it.
Regarding this bug, "select" is completely innocent...
> > If you want to keep the #ifdef's, what's the problem with the second
> > patch I proposed to fix this bug?
>
> For one thing, I didn't see it until after I posted this one...
> other than that, the basic approach could well be fine; I didn't
> go through it in detail.
>
> But on the other hand, it seems that only the ASIX code will work
> right; the DM9601 and MCS7830 Kconfig is different/wrong.
I'm not seeing the problem.
Which configuration will be handled wrongly?
> - Dave
cu
Adrian
[1] http://www.lpi.org/en/lpi/english/certification/the_lpic_program/exam_102_detailed_objectives
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Fri, Nov 02, 2007 at 11:45:15AM -0700, David Brownell wrote:
>...
> --- a.orig/drivers/net/usb/usbnet.c 2007-10-13 15:16:10.000000000 -0700
> +++ a/drivers/net/usb/usbnet.c 2007-11-02 11:39:59.000000000 -0700
> @@ -682,10 +682,17 @@ done_nopm:
> /* ethtool methods; minidrivers may need to add some more, but
> * they'll probably want to use this base set.
> */
> +#undef HAVE_MII
>
> -#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
> +#if defined(CONFIG_MII)
> #define HAVE_MII
>
> +#elif defined(CONFIG_MII_MODULE) && defined(MODULE)
> +#define HAVE_MII
> +#endif
> +
> +#ifdef HAVE_MII
> +
> int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
> {
> struct usbnet *dev = netdev_priv(net);
>
Despite all what you do in Kconfig and what you wrongly blame on
"select" the bug is in usbnet.c and this fix to usbnet.c _alone_
would be enough to fix the bug.
But since you said you care about not including bloat you should better
take my second patch that results in smaller code in some configurations.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
From: Adrian Bunk <[email protected]>
Date: Thu, 1 Nov 2007 23:25:24 +0100
> All this USB_USBNET_MII trickery is simply not worth it considering how
> few code it saves.
>
> As a side effect, this also fixes the following compile error reported
> by Toralf F?rster:
>
> <-- snip -->
>
> ...
> LD .tmp_vmlinux1
> drivers/built-in.o: In function `usbnet_set_settings':
> (.text+0xf1876): undefined reference to `mii_ethtool_sset'
> drivers/built-in.o: In function `usbnet_get_settings':
> (.text+0xf1836): undefined reference to `mii_ethtool_gset'
> drivers/built-in.o: In function `usbnet_get_link':
> (.text+0xf18d6): undefined reference to `mii_link_ok'
> drivers/built-in.o: In function `usbnet_nway_reset':
> (.text+0xf18f6): undefined reference to `mii_nway_restart'
> make: *** [.tmp_vmlinux1] Error 1
>
> <-- snip -->
>
> Signed-off-by: Adrian Bunk <[email protected]>
Applied, thanks Adrian.
David, I hate to say this and point you out like this, but you are a
real cancer for bug fixes to USB things in the kernel, and I'm very
tired of seeing things stuck in the mud (and engineering resources
wasted) because of how you handle things. It's very bad for Linux,
and the USB code in particular.
If I had a nickel for every patch from someone else you grinded into
the ground and stalled I'd truly be a millionare.
You absolutely stifle development progress. I thought my OHCI
deadlock patch was an isolated case (and nothing is still applied,
which is just awesome, my original patch was posted more than a month
ago), but you're doing the same exact thing to Adrian here too.
You want to see things fixed your way. But you can get away with the
if, and only if, you can spend every day working on your own version
of fixes when you don't like the submitters version. But unlike me
you don't have that luxury so you have to give patch submitters a
larger level of freedom and, plainly, just "let go".
On Wednesday 07 November 2007, David Miller wrote:
> David, I hate to say this and point you out like this, but you are a
> real cancer for bug fixes to USB things in the kernel,
You didn't hate it enough to find a way to deal with your issue
that doesn't involve namecalling or other flamage, I'll note.
I know, I know ... you wouldn't want anyone to get the mistaken
impression that LKML is one of those easy-to-get-along-on mailing
lists. ?Namecalling helps prevent anyone from ever thinking that!
> If I had a nickel for every patch from someone else you grinded into
> the ground and stalled I'd truly be a millionare.
Hyperbole helps too...
Twenty million patches, surely from some large fraction of a
million kernel patch submitters ... what a crazy dream!
(An enviable one, maybe; but way below the last statistics
on the subject which I read.)
As for "grind into the ground and stall" ... clearly that's
not how I'd describe things.
> You absolutely stifle development progress. ?I thought my OHCI
> deadlock patch was an isolated case (and nothing is still applied,
> which is just awesome, my original patch was posted more than a month
> ago),
I'm not sure why the patch I signed off on didn't merge either;
that was specificially related to the OHCI part of that problem.
Hmm, digging through my mail I see several other patches doing
the same thing were also floating around. None of them had any
improvement over what I had signed off on. Maybe there was just
too much confusion for Greg to want to merge the one which I'd
already signed off on...
It hasn't been removed from my merge queue, since it's not yet
shown up from kernel.org ... which means that it'd be one of
the patches to be resubmitted before we get much deeper into
this particular RC series. In fact, I just resent it (with a
few minor tweaks, essentially comment updates).
Of course, *YOU* are the roadblock on the more generic side of
that problem. I don't recall hearing back from you about the
minor/obvious update to the HUB+EHCI patch adding a msleep()
to bypass the hardware race you reported.
That is, other than your refusal to even try letting the three
or more clock domains finish synchronizing, before releasing
that lock and then starting something that relied on that synch
having finished...
>???????but you're doing the same exact thing to Adrian here too.
Hmm, and there I was prepared to sign off on Adrian's last patch.
True, I hadn't yet done so. But there were several workable fixes
in hand, plus a trivial workaround ... I just didn't make time to
try that one out over the weekend.
I'm glad you grabbed the patch I would have signed off on, if I'd
had time to verify it.
> You want to see things fixed your way. ?But you can get away with the
> if, and only if, you can spend every day working on your own version
> of fixes when you don't like the submitters version.
You know, that's hardly a standard kernel-wide policy for how
maintainers work ... except maybe ones in "supported" areas,
and not always even then.
Though I certainly know why it could seem attactive to want that
treatment for patches you submit. I know many of us would just love
to get that level of response/support for everything we submit.
I don't always get it; in some areas, it *never* happens.
In fact, it's pretty routine to have patches wait for a while
before they get merged, or even sometimes reviewed ... where
"a while" will sometimes cover many (annoying) months.
Also, some maintainers demand many iterations of patches, without
doing *any* fixup themselves. ?It's as if ... hmm ... maybe there
were only so many hours per day going into that such stuff? Or as
if people had different priorities? ?Bizarre notions, I know!!
>???????But unlike me
> you don't have that luxury so you have to give patch submitters a
> larger level of freedom and, plainly, just "let go".
Same goes for maintainers too, you know. If you're still
wondering about a patch, a private "ping" is common practice;
far more so than public vilification.
In fact, it's best if you never use a public vilification step.
Certainly not until after conventional measures ("ping!") fail
repeatedly, and bad faith has been clearly shown. (Neither of
which apply in this case.)
On Friday 02 November 2007, Adrian Bunk wrote:
> <-- snip -->
>
>
> This patch fixes the following compile error with CONFIG_MII=m,
> CONFIG_USB_USBNET=y, CONFIG_USB_USBNET_MII=n:
This is the patch I liked better, if there was going to be
one going upstream without additional test from me ... sorry,
the patch you appear to have accepted was the worst of the
three patches in flight.
>
> <-- snip -->
>
> ...
> LD .tmp_vmlinux1
> drivers/built-in.o: In function `usbnet_set_settings':
> (.text+0xf1876): undefined reference to `mii_ethtool_sset'
> drivers/built-in.o: In function `usbnet_get_settings':
> (.text+0xf1836): undefined reference to `mii_ethtool_gset'
> drivers/built-in.o: In function `usbnet_get_link':
> (.text+0xf18d6): undefined reference to `mii_link_ok'
> drivers/built-in.o: In function `usbnet_nway_reset':
> (.text+0xf18f6): undefined reference to `mii_nway_restart'
> make: *** [.tmp_vmlinux1] Error 1
>
> <-- snip -->
>
> This bug was introduced by commit 18ee91fa9815fa3bb4e51cdcb8229bd0a0f11a70
> and reported by Toralf F?rster.
>
> Signed-off-by: Adrian Bunk <[email protected]>
>
> ---
>
> BTW:
> The Kconfig part of this patch is not really required, but testing for
> #if defined(CONFIG_USB_USBNET_MII) || defined(CONFIG_USB_USBNET_MII_MODULE)
> would look needlessly ugly.
>
> drivers/net/usb/Kconfig | 5 ++---
> drivers/net/usb/usbnet.c | 7 +++----
> 2 files changed, 5 insertions(+), 7 deletions(-)
>
> a421e4910eb30b140a315e274632e87c7a218df6
> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
> index 5a96d74..9261371 100644
> --- a/drivers/net/usb/Kconfig
> +++ b/drivers/net/usb/Kconfig
> @@ -94,12 +94,11 @@ config USB_RTL8150
> module will be called rtl8150.
>
> config USB_USBNET_MII
> - tristate
> - default n
> + bool
>
> config USB_USBNET
> tristate "Multi-purpose USB Networking Framework"
> - select MII if USB_USBNET_MII != n
> + select MII if USB_USBNET_MII
> ---help---
> This driver supports several kinds of network links over USB,
> with "minidrivers" built around a common network driver core
> diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
> index acd5f1c..7393ab0 100644
> --- a/drivers/net/usb/usbnet.c
> +++ b/drivers/net/usb/usbnet.c
> @@ -683,8 +683,7 @@ done_nopm:
> * they'll probably want to use this base set.
> */
>
> -#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
> -#define HAVE_MII
> +#ifdef CONFIG_USB_USBNET_MII
>
> int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
> {
> @@ -744,7 +743,7 @@ int usbnet_nway_reset(struct net_device *net)
> }
> EXPORT_SYMBOL_GPL(usbnet_nway_reset);
>
> -#endif /* HAVE_MII */
> +#endif /* CONFIG_USB_USBNET_MII */
>
> void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
> {
> @@ -776,7 +775,7 @@ EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
>
> /* drivers may override default ethtool_ops in their bind() routine */
> static struct ethtool_ops usbnet_ethtool_ops = {
> -#ifdef HAVE_MII
> +#ifdef CONFIG_USB_USBNET_MII
> .get_settings = usbnet_get_settings,
> .set_settings = usbnet_set_settings,
> .get_link = usbnet_get_link,
>
> > But on the other hand, it seems that only the ASIX code will work
> > right; the DM9601 and MCS7830 Kconfig is different/wrong.
>
> I'm not seeing the problem.
>
> Which configuration will be handled wrongly?
Notice how only the ASIX kconfig depended on NET_ETHERNET...
since MII depends on NET_ETHERNET, and (last I knew) the
reverse dependencies didn't capture the complete dependency
tree, selecting only MII would leave out some stuff.
On Wed, Nov 07, 2007 at 02:34:52PM -0800, David Brownell wrote:
> > > But on the other hand, it seems that only the ASIX code will work
> > > right; the DM9601 and MCS7830 Kconfig is different/wrong.
> >
> > I'm not seeing the problem.
> >
> > Which configuration will be handled wrongly?
>
> Notice how only the ASIX kconfig depended on NET_ETHERNET...
> since MII depends on NET_ETHERNET, and (last I knew) the
> reverse dependencies didn't capture the complete dependency
> tree, selecting only MII would leave out some stuff.
Except for one s390 net driver (I'll check why it's doing this) the
NET_ETHERNET option does not influence what code is being generated -
it's just a Kconfig-internal option allowing to disable a huge bunch
of drivers at once.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Wednesday 07 November 2007, Adrian Bunk wrote:
> On Wed, Nov 07, 2007 at 02:34:52PM -0800, David Brownell wrote:
> > > > But on the other hand, it seems that only the ASIX code will work
> > > > right; the DM9601 and MCS7830 Kconfig is different/wrong.
> > >
> > > I'm not seeing the problem.
> > >
> > > Which configuration will be handled wrongly?
> >
> > Notice how only the ASIX kconfig depended on NET_ETHERNET...
> > since MII depends on NET_ETHERNET, and (last I knew) the
> > reverse dependencies didn't capture the complete dependency
> > tree, selecting only MII would leave out some stuff.
>
> Except for one s390 net driver (I'll check why it's doing this) the
> NET_ETHERNET option does not influence what code is being generated -
> it's just a Kconfig-internal option allowing to disable a huge bunch
> of drivers at once.
Drivers like ... AX88xxx, DM9601, and MCS7830!! Except as
it turns out, only the first one behaves as intended.
You can tell it's a problem by the way it's inconsistent,
regardless of the details of the problem. :)
- Dave
On Wed, Nov 07, 2007 at 06:53:48PM -0800, David Brownell wrote:
> On Wednesday 07 November 2007, Adrian Bunk wrote:
> > On Wed, Nov 07, 2007 at 02:34:52PM -0800, David Brownell wrote:
> > > > > But on the other hand, it seems that only the ASIX code will work
> > > > > right; the DM9601 and MCS7830 Kconfig is different/wrong.
> > > >
> > > > I'm not seeing the problem.
> > > >
> > > > Which configuration will be handled wrongly?
> > >
> > > Notice how only the ASIX kconfig depended on NET_ETHERNET...
> > > since MII depends on NET_ETHERNET, and (last I knew) the
> > > reverse dependencies didn't capture the complete dependency
> > > tree, selecting only MII would leave out some stuff.
> >
> > Except for one s390 net driver (I'll check why it's doing this) the
> > NET_ETHERNET option does not influence what code is being generated -
> > it's just a Kconfig-internal option allowing to disable a huge bunch
> > of drivers at once.
>
> Drivers like ... AX88xxx, DM9601, and MCS7830!! Except as
> it turns out, only the first one behaves as intended.
>
> You can tell it's a problem by the way it's inconsistent,
> regardless of the details of the problem. :)
I'm all for cleanups that make things consistent. :)
As long as we can agree that there's a difference between a problem like
a compile or runtime error and an opportunity for making things
consistent.
> - Dave
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Wed, Nov 07, 2007 at 11:52:32PM +0100, Adrian Bunk wrote:
> On Wed, Nov 07, 2007 at 02:34:52PM -0800, David Brownell wrote:
> > > > But on the other hand, it seems that only the ASIX code will work
> > > > right; the DM9601 and MCS7830 Kconfig is different/wrong.
> > >
> > > I'm not seeing the problem.
> > >
> > > Which configuration will be handled wrongly?
> >
> > Notice how only the ASIX kconfig depended on NET_ETHERNET...
> > since MII depends on NET_ETHERNET, and (last I knew) the
> > reverse dependencies didn't capture the complete dependency
> > tree, selecting only MII would leave out some stuff.
>
> Except for one s390 net driver (I'll check why it's doing this) the
> NET_ETHERNET option does not influence what code is being generated -
> it's just a Kconfig-internal option allowing to disable a huge bunch
> of drivers at once.
Damn, I shouldn't have only grep'ed under drivers/.
@davem:
Please look at net/ipv4/arp.c:arp_process()
Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
CONFIG_NETDEV_10000=y will not be handled correctly there?
And the best solution is to nuke all #ifdef's in this function and make
the code unconditionally available?
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 8 Nov 2007 04:30:10 +0100 Adrian Bunk wrote:
> On Wed, Nov 07, 2007 at 11:52:32PM +0100, Adrian Bunk wrote:
> > On Wed, Nov 07, 2007 at 02:34:52PM -0800, David Brownell wrote:
> > > > > But on the other hand, it seems that only the ASIX code will work
> > > > > right; the DM9601 and MCS7830 Kconfig is different/wrong.
> > > >
> > > > I'm not seeing the problem.
> > > >
> > > > Which configuration will be handled wrongly?
> > >
> > > Notice how only the ASIX kconfig depended on NET_ETHERNET...
> > > since MII depends on NET_ETHERNET, and (last I knew) the
> > > reverse dependencies didn't capture the complete dependency
> > > tree, selecting only MII would leave out some stuff.
> >
> > Except for one s390 net driver (I'll check why it's doing this) the
> > NET_ETHERNET option does not influence what code is being generated -
> > it's just a Kconfig-internal option allowing to disable a huge bunch
> > of drivers at once.
>
> Damn, I shouldn't have only grep'ed under drivers/.
>
> @davem:
>
> Please look at net/ipv4/arp.c:arp_process()
>
> Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
> CONFIG_NETDEV_10000=y will not be handled correctly there?
I'd say yes, you are correct.
> And the best solution is to nuke all #ifdef's in this function and make
> the code unconditionally available?
---
~Randy
From: Adrian Bunk <[email protected]>
Date: Thu, 8 Nov 2007 04:30:10 +0100
> @davem:
>
> Please look at net/ipv4/arp.c:arp_process()
>
> Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
> CONFIG_NETDEV_10000=y will not be handled correctly there?
>
> And the best solution is to nuke all #ifdef's in this function and make
> the code unconditionally available?
I think removing those specific ifdefs in arp_process()
is the best option, yes.
On Mon, Nov 19, 2007 at 09:26:39PM -0800, David Miller wrote:
> From: Adrian Bunk <[email protected]>
> Date: Thu, 8 Nov 2007 04:30:10 +0100
>
> > @davem:
> >
> > Please look at net/ipv4/arp.c:arp_process()
> >
> > Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
> > CONFIG_NETDEV_10000=y will not be handled correctly there?
> >
> > And the best solution is to nuke all #ifdef's in this function and make
> > the code unconditionally available?
>
> I think removing those specific ifdefs in arp_process()
> is the best option, yes.
Patch below.
cu
Adrian
<-- snip -->
The #ifdef's in arp_process() were not only a mess, they were also wrong
in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or
CONFIG_NETDEV_10000=y) cases.
Since they are not required this patch removes them.
Also removed are some #ifdef's around #include's that caused compile
errors after this change.
Signed-off-by: Adrian Bunk <[email protected]>
---
net/ipv4/arp.c | 19 -------------------
1 file changed, 19 deletions(-)
759b820456b1400b2a6b061eca9667bf7a6f053d
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 36d6798..0c5d549 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -111,12 +111,8 @@
#include <net/tcp.h>
#include <net/sock.h>
#include <net/arp.h>
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
#include <net/ax25.h>
-#if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
#include <net/netrom.h>
-#endif
-#endif
#if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
#include <net/atmclip.h>
struct neigh_table *clip_tbl_hook;
@@ -731,20 +727,10 @@ static int arp_process(struct sk_buff *skb)
htons(dev_type) != arp->ar_hrd)
goto out;
break;
-#ifdef CONFIG_NET_ETHERNET
case ARPHRD_ETHER:
-#endif
-#ifdef CONFIG_TR
case ARPHRD_IEEE802_TR:
-#endif
-#ifdef CONFIG_FDDI
case ARPHRD_FDDI:
-#endif
-#ifdef CONFIG_NET_FC
case ARPHRD_IEEE802:
-#endif
-#if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
- defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
/*
* ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
* devices, according to RFC 2625) devices will accept ARP
@@ -759,21 +745,16 @@ static int arp_process(struct sk_buff *skb)
arp->ar_pro != htons(ETH_P_IP))
goto out;
break;
-#endif
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
case ARPHRD_AX25:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_AX25))
goto out;
break;
-#if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
case ARPHRD_NETROM:
if (arp->ar_pro != htons(AX25_P_IP) ||
arp->ar_hrd != htons(ARPHRD_NETROM))
goto out;
break;
-#endif
-#endif
}
/* Understand only these message types */
On Sun, Nov 25, 2007 at 04:30:03PM +0000, Adrian Bunk wrote:
> > >
> > > Please look at net/ipv4/arp.c:arp_process()
> > >
> > > Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
> > > CONFIG_NETDEV_10000=y will not be handled correctly there?
> > >
> > > And the best solution is to nuke all #ifdef's in this function and make
> > > the code unconditionally available?
> >
> > I think removing those specific ifdefs in arp_process()
> > is the best option, yes.
>
> Patch below.
Thanks Adrian. Patch applied to net-2.6.
Do we need this for stable too?
Chers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
On Mon, Nov 26, 2007 at 11:19:26PM +0800, Herbert Xu wrote:
> On Sun, Nov 25, 2007 at 04:30:03PM +0000, Adrian Bunk wrote:
> > > >
> > > > Please look at net/ipv4/arp.c:arp_process()
> > > >
> > > > Am I right that CONFIG_NET_ETHERNET=n and CONFIG_NETDEV_1000=y or
> > > > CONFIG_NETDEV_10000=y will not be handled correctly there?
> > > >
> > > > And the best solution is to nuke all #ifdef's in this function and make
> > > > the code unconditionally available?
> > >
> > > I think removing those specific ifdefs in arp_process()
> > > is the best option, yes.
> >
> > Patch below.
>
> Thanks Adrian. Patch applied to net-2.6.
>
> Do we need this for stable too?
Unless I'm misunderstanding the code we currently wrongly ignore
some ARP packages based on the setting of an unrelated option, so
it seems to be a -stable candidate when it's in Linus' tree.
> Chers,
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed