Support suspend to ram on socfpga.
* allocate space in ocram using sram driver.
* Add a function in ocram to place DDR in self-refresh
and suspend.
* SDRAM ECC is mutually exclusive with using ocram for
suspend, so disable SDRAM ECC if socfpga suspend is
enabled.
* Add a device tree binding document for the Altera
SOCFPGA SDRAM controller that is used to put DDR in
self-refresh mode.
Alan Tull (2):
ARM: socfpga: support suspend to ram
ARM: socfpga: dts: add sdram controller dt binding doc
.../arm/altera/socfpga-sdram-controller.txt | 12 ++
arch/arm/mach-socfpga/Kconfig | 10 +-
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/core.h | 6 +-
arch/arm/mach-socfpga/pm.c | 150 +++++++++++++++++++
arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++
arch/arm/mach-socfpga/socfpga.c | 6 +-
drivers/edac/Kconfig | 2 +-
8 files changed, 340 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
create mode 100644 arch/arm/mach-socfpga/pm.c
create mode 100644 arch/arm/mach-socfpga/self-refresh.S
--
1.7.9.5
Add code that requests that the sdr controller go into
self-refresh mode. This code is run from ocram.
This patch assumes that u-boot has already configured sdr:
sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA
platforms. CONFIG_SOCFPGA_SUSPEND enables suspend-to-RAM and
prevents selecting CONFIG_EDAC_ALTERA_MC.
How to suspend to ram:
$ echo enabled > \
/sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup
$ echo -n mem > /sys/power/state
Signed-off-by: Alan Tull <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Steffen Trumtrar <[email protected]>
---
v2: use Generic on-chip SRAM driver to allocate ocram
rm fncpy_align since generic allocator handles alignment
check __arm_ioremap_exec return code
check for NULL pointers
add a comment regarding sdram controller configuration
v3: fix renamed #define
propagate socfpga_setup_ocram_self_refresh error code
v4: Kconfig: don't need to select GENERIC_ALLOCATER
add CONFIG_SOCFPGA_SUSPEND
make s2r and EDAC support mutually exclusive
socfpga.c: add sdr_ctl_base_addr
return error if ocram not available in device tree
update copyright years
---
arch/arm/mach-socfpga/Kconfig | 10 ++-
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/core.h | 6 +-
arch/arm/mach-socfpga/pm.c | 150 ++++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/socfpga.c | 6 +-
drivers/edac/Kconfig | 2 +-
7 files changed, 328 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/mach-socfpga/pm.c
create mode 100644 arch/arm/mach-socfpga/self-refresh.S
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index b5f8d75..b26a684 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,4 +1,4 @@
-config ARCH_SOCFPGA
+menuconfig ARCH_SOCFPGA
bool "Altera SOCFPGA family" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
@@ -8,3 +8,11 @@ config ARCH_SOCFPGA
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
+
+if ARCH_SOCFPGA
+config SOCFPGA_SUSPEND
+ bool "Suspend to RAM on SOCFPGA"
+ help
+ Select this if you want to enable Suspend-to-RAM on SOCFPGA
+ platforms.
+endif
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 6dd7a93..b8f9e23 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -4,3 +4,4 @@
obj-y := socfpga.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index a0f3b1c..498b271 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -1,6 +1,6 @@
/*
* Copyright 2012 Pavel Machek <[email protected]>
- * Copyright (C) 2012 Altera Corporation
+ * Copyright (C) 2012-2015 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -39,6 +39,10 @@ extern void socfpga_sysmgr_init(void);
extern void __iomem *sys_manager_base_addr;
extern void __iomem *rst_manager_base_addr;
+extern void __iomem *sdr_ctl_base_addr;
+
+u32 socfpga_sdram_self_refresh(u32 sdr_base, u32 scu_base);
+extern unsigned int socfpga_sdram_self_refresh_sz;
extern struct smp_operations socfpga_smp_ops;
extern char secondary_trampoline, secondary_trampoline_end;
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
new file mode 100644
index 0000000..166ac32
--- /dev/null
+++ b/arch/arm/mach-socfpga/pm.c
@@ -0,0 +1,150 @@
+/*
+ * arch/arm/mach-socfpga/pm.c
+ *
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ *
+ * with code from pm-imx6.c
+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bitops.h>
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+#include "core.h"
+
+/* Pointer to function copied to ocram */
+static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base, u32 scu_base);
+
+static int socfpga_setup_ocram_self_refresh(void)
+{
+ struct platform_device *pdev;
+ phys_addr_t ocram_pbase;
+ struct device_node *np;
+ struct gen_pool *ocram_pool;
+ unsigned long ocram_base;
+ void __iomem *suspend_ocram_base;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!np) {
+ pr_err("%s: Unable to find mmio-sram in dtb\n", __func__);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_warn("%s: failed to find ocram device!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_pool = dev_get_gen_pool(&pdev->dev);
+ if (!ocram_pool) {
+ pr_warn("%s: ocram pool unavailable!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
+ if (!ocram_base) {
+ pr_warn("%s: unable to alloc ocram!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+ suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
+ socfpga_sdram_self_refresh_sz,
+ false);
+ if (!suspend_ocram_base) {
+ pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ /* Copy the code that puts DDR in self refresh to ocram */
+ socfpga_sdram_self_refresh_in_ocram =
+ (void *)fncpy(suspend_ocram_base,
+ &socfpga_sdram_self_refresh,
+ socfpga_sdram_self_refresh_sz);
+
+ WARN(!socfpga_sdram_self_refresh_in_ocram,
+ "could not copy function to ocram");
+ if (!socfpga_sdram_self_refresh_in_ocram)
+ ret = -EFAULT;
+
+put_node:
+ of_node_put(np);
+
+ return ret;
+}
+
+static int socfpga_pm_suspend(unsigned long arg)
+{
+ u32 ret;
+
+ if (!sdr_ctl_base_addr || !socfpga_scu_base_addr)
+ return -EFAULT;
+
+ ret = socfpga_sdram_self_refresh_in_ocram(
+ (u32)sdr_ctl_base_addr, (u32)socfpga_scu_base_addr);
+
+ pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__,
+ ret & 0xffff, (ret >> 16) & 0xffff);
+
+ return 0;
+}
+
+static int socfpga_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ outer_disable();
+ cpu_suspend(0, socfpga_pm_suspend);
+ outer_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops socfpga_pm_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = socfpga_pm_enter,
+};
+
+static int __init socfpga_pm_init(void)
+{
+ int ret;
+
+ ret = socfpga_setup_ocram_self_refresh();
+ if (ret)
+ return ret;
+
+ suspend_set_ops(&socfpga_pm_ops);
+ pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n");
+
+ return 0;
+}
+arch_initcall(socfpga_pm_init);
diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S
new file mode 100644
index 0000000..b9f95bc
--- /dev/null
+++ b/arch/arm/mach-socfpga/self-refresh.S
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define SOCFPGA_SCU_CTRL_OFFS 0
+#define SCU_STANDBY_ENA 0x20
+#define MAX_LOOP_COUNT 1000
+
+/* Register offset */
+#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54
+#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58
+
+/* Bitfield positions */
+#define SELFRSHREQ_POS 3
+#define SELFRSHREQ_MASK 0x8
+
+#define SELFRFSHACK_POS 1
+#define SELFRFSHACK_MASK 0x2
+
+ /*
+ * This code assumes that the bootloader has already
+ * properly configured the sdram controller:
+ *
+ * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
+ * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
+ * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
+ */
+
+ .arch armv7-a
+ .text
+ .align 3
+
+ /*
+ * socfpga_sdram_self_refresh
+ *
+ * r0 : sdr_ctl_base_addr
+ * r1 : socfpga_scu_base_addr
+ * r2 : temp storage of register values
+ * r3 : loop counter
+ * r4 : temp storage of return value
+ *
+ * return value: lower 16 bits: loop count going into self refresh
+ * upper 16 bits: loop count exiting self refresh
+ */
+ENTRY(socfpga_sdram_self_refresh)
+ stmfd sp!, {r4}
+
+ /*
+ * Enable SCU (snoop) standby mode.
+ *
+ * From the ARM Cortex-A9 MPCore Technical Reference Manual:
+ * "When set, SCU CLK is turned off when all processors are in WFI
+ * mode, there is no pending request on the ACP (if implemented), and
+ * there is no remaining activity in the SCU."
+ */
+ ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
+ orr r2, r2, #SCU_STANDBY_ENA
+ str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
+
+ /* Enable dynamic clock gating in the Power Control Register. */
+ mrc p15, 0, r2, c15, c0, 0
+ orr r2, r2, #1
+ mcr p15, 0, r2, c15, c0, 0
+
+ /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+ orr r2, r2, #SELFRSHREQ_MASK
+ str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+ /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */
+ mov r3, #0
+while_ack_0:
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+ and r2, r2, #SELFRFSHACK_MASK
+ cmp r2, #SELFRFSHACK_MASK
+ beq ack_1
+
+ add r3, #1
+ cmp r3, #MAX_LOOP_COUNT
+ bne while_ack_0
+
+ack_1:
+ mov r4, r3
+
+ /*
+ * Execute an ISB instruction to ensure that all of the
+ * CP15 register changes have been committed.
+ */
+ isb
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * by any CPU in the cluster have completed.
+ */
+ dsb
+ dmb
+
+ wfi
+
+ /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+ bic r2, r2, #SELFRSHREQ_MASK
+ str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+ /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */
+ mov r3, #0
+while_ack_1:
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+ and r2, r2, #SELFRFSHACK_MASK
+ cmp r2, #SELFRFSHACK_MASK
+ bne ack_0
+
+ add r3, #1
+ cmp r3, #MAX_LOOP_COUNT
+ bne while_ack_1
+
+ack_0:
+ /*
+ * Prepare return value:
+ * Shift loop count for exiting self refresh into upper 16 bits.
+ * Leave loop count for requesting self refresh in lower 16 bits.
+ */
+ mov r3, r3, lsl #16
+ add r4, r4, r3
+
+ /* Disable dynamic clock gating in the Power Control Register. */
+ mrc p15, 0, r2, c15, c0, 0
+ bic r2, r2, #1
+ mcr p15, 0, r2, c15, c0, 0
+
+ /* Disable SCU standby mode */
+ ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
+ bic r2, r2, #SCU_STANDBY_ENA
+ str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS]
+
+ mov r0, r4 @ return value
+ ldmfd sp!, {r4}
+ bx lr @ return
+
+ENDPROC(socfpga_sdram_self_refresh)
+ENTRY(socfpga_sdram_self_refresh_sz)
+ .word . - socfpga_sdram_self_refresh
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index f5e597c..a807aa0 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Altera Corporation
+ * Copyright (C) 2012-2015 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -30,6 +30,7 @@
void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
void __iomem *rst_manager_base_addr;
+void __iomem *sdr_ctl_base_addr;
unsigned long socfpga_cpu1start_addr;
static struct map_desc scu_io_desc __initdata = {
@@ -82,6 +83,9 @@ void __init socfpga_sysmgr_init(void)
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
rst_manager_base_addr = of_iomap(np, 0);
+
+ np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
+ sdr_ctl_base_addr = of_iomap(np, 0);
}
static void __init socfpga_init_irq(void)
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index cb59619..9b69b97 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -378,7 +378,7 @@ config EDAC_OCTEON_PCI
config EDAC_ALTERA_MC
tristate "Altera SDRAM Memory Controller EDAC"
- depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+ depends on EDAC_MM_EDAC && ARCH_SOCFPGA && !SOCFPGA_SUSPEND
help
Support for error detection and correction on the
Altera SDRAM memory controller. Note that the
--
1.7.9.5
Add binding doc for Altera SOCFPGA SDRAM controller.
Signed-off-by: Alan Tull <[email protected]>
---
v4: Add bindings doc
---
.../arm/altera/socfpga-sdram-controller.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
new file mode 100644
index 0000000..77ca635
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
@@ -0,0 +1,12 @@
+Altera SOCFPGA SDRAM Controller
+
+Required properties:
+- compatible : Should contain "altr,sdr-ctl" and "syscon".
+ syscon is required by the Altera SOCFPGA SDRAM EDAC.
+- reg : Should contain 1 register range (address and length)
+
+Example:
+ sdr: sdr@ffc25000 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
--
1.7.9.5
On Fri 2015-05-22 13:02:15, Alan Tull wrote:
> Add binding doc for Altera SOCFPGA SDRAM controller.
>
> Signed-off-by: Alan Tull <[email protected]>
> ---
> v4: Add bindings doc
> ---
> .../arm/altera/socfpga-sdram-controller.txt | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
> new file mode 100644
> index 0000000..77ca635
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
> @@ -0,0 +1,12 @@
> +Altera SOCFPGA SDRAM Controller
> +
> +Required properties:
> +- compatible : Should contain "altr,sdr-ctl" and "syscon".
> + syscon is required by the Altera SOCFPGA SDRAM EDAC.
> +- reg : Should contain 1 register range (address and length)
> +
> +Example:
> + sdr: sdr@ffc25000 {
> + compatible = "altr,sdr-ctl", "syscon";
Is the syscon binding good idea? Should the EDAC driver be fixed to
accept altr,sdr-ctl binding, instead?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA
> platforms. CONFIG_SOCFPGA_SUSPEND enables suspend-to-RAM and
> prevents selecting CONFIG_EDAC_ALTERA_MC.
Do we went to have the dependency at the .config time? We would like
to do generic kernels booting on many machines, this kind of breaks
that...
> + /*
> + * This code assumes that the bootloader has already
> + * properly configured the sdram controller:
Which bootloaders can do that?
> + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
Would it make sense to configure it in Linux?
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi Alan,
On 5/22/15 1:02 PM, Alan Tull wrote:
> Add code that requests that the sdr controller go into
> self-refresh mode. This code is run from ocram.
>
> This patch assumes that u-boot has already configured sdr:
> sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
>
> Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA
> platforms. CONFIG_SOCFPGA_SUSPEND enables suspend-to-RAM and
> prevents selecting CONFIG_EDAC_ALTERA_MC.
>
> How to suspend to ram:
> $ echo enabled > \
> /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup
>
> $ echo -n mem > /sys/power/state
>
> Signed-off-by: Alan Tull <[email protected]>
> Cc: Pavel Machek <[email protected]>
> Cc: Arnd Bergmann <[email protected]>
> Cc: Dinh Nguyen <[email protected]>
> Cc: Steffen Trumtrar <[email protected]>
> ---
> v2: use Generic on-chip SRAM driver to allocate ocram
> rm fncpy_align since generic allocator handles alignment
> check __arm_ioremap_exec return code
> check for NULL pointers
> add a comment regarding sdram controller configuration
> v3: fix renamed #define
> propagate socfpga_setup_ocram_self_refresh error code
> v4: Kconfig: don't need to select GENERIC_ALLOCATER
> add CONFIG_SOCFPGA_SUSPEND
> make s2r and EDAC support mutually exclusive
> socfpga.c: add sdr_ctl_base_addr
> return error if ocram not available in device tree
> update copyright years
> ---
<snip>
> +
> +static int socfpga_pm_suspend(unsigned long arg)
> +{
> + u32 ret;
> +
> + if (!sdr_ctl_base_addr || !socfpga_scu_base_addr)
> + return -EFAULT;
> +
> + ret = socfpga_sdram_self_refresh_in_ocram(
> + (u32)sdr_ctl_base_addr, (u32)socfpga_scu_base_addr);
> +
I had a patch that removed socfpga_scu_base_addr from being a global and
just a local variable in:
f6e14376fb20 ARM: socfpga: use of_iomap to map the SCU
This patch will be in v4.2 and is currently in arm-soc/next or
at my fork: kernel/git/dinguyen/linux.git socfpga_for_next_arria10
So you will either need to make socfpga_scu_base_addr global again, or
you can use the asm instruction to get the SCU base addr.
Sorry about that..
Dinh
On Mon, 25 May 2015, Pavel Machek wrote:
> On Fri 2015-05-22 13:02:15, Alan Tull wrote:
> > Add binding doc for Altera SOCFPGA SDRAM controller.
> >
> > Signed-off-by: Alan Tull <[email protected]>
> > ---
> > v4: Add bindings doc
> > ---
> > .../arm/altera/socfpga-sdram-controller.txt | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
> >
> > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
> > new file mode 100644
> > index 0000000..77ca635
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
> > @@ -0,0 +1,12 @@
> > +Altera SOCFPGA SDRAM Controller
> > +
> > +Required properties:
> > +- compatible : Should contain "altr,sdr-ctl" and "syscon".
> > + syscon is required by the Altera SOCFPGA SDRAM EDAC.
> > +- reg : Should contain 1 register range (address and length)
> > +
> > +Example:
> > + sdr: sdr@ffc25000 {
> > + compatible = "altr,sdr-ctl", "syscon";
>
> Is the syscon binding good idea? Should the EDAC driver be fixed to
> accept altr,sdr-ctl binding, instead?
> Pavel
What problems do you see here? I'd like to avoid changing the
EDAC if possible.
We have 3 things (EDAC, fpga bridges, suspend) that need access
to the sdc. They access 3 nonoverlapping sets of registers
within the sdc to get at 3 different sets of functionality.
Both EDAC and the fpga bridge are using syscon. The suspend
code can't use syscon because it has to be assembly running
in OCRAM to enable self-refresh for the DDR.
Thor Thayer ended up using syscon for the EDAC after a thorough
discussion on lkml and several revisions of the EDAC driver that
tried it several different ways before finally ending up back
where he started.
Alan Tull
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On Mon, 25 May 2015, Pavel Machek wrote:
> Hi!
>
> > Suspend-to-RAM and EDAC support are mutually exclusive on SOCFPGA
> > platforms. CONFIG_SOCFPGA_SUSPEND enables suspend-to-RAM and
> > prevents selecting CONFIG_EDAC_ALTERA_MC.
>
> Do we went to have the dependency at the .config time? We would like
> to do generic kernels booting on many machines, this kind of breaks
> that...
>
Hi Pavel,
Thanks for the feedback.
Yes I agree.
One possibility is that I could add a suspend function to EDAC that
always fails with a helpful message like "Suspend with EDAC not
supported." If someone wants to suspend, they'll have to take the
EDAC out of the device tree so its probe will bomb out. I'm not
sure how normal it is to have suspend functions in the kernel
that always fail, though.
> > + /*
> > + * This code assumes that the bootloader has already
> > + * properly configured the sdram controller:
>
> Which bootloaders can do that?
Whatever bootloader is configuring the sdram controller for the
board.
>
> > + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> > + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> > + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
>
> Would it make sense to configure it in Linux?
>
> Thanks,
> Pavel
The bootloader is responsible for configuring the sdram
controller with parameters appropriate for whatever vendor's DDR
is on the board, so that's where this must go.
Now I realize I should make this message more general, since it is
true for the socfpga cyclone5 devkit, but may need to be adjusted
for other boards.
Alan
Hi!
> Thanks for the feedback.
>
> Yes I agree.
>
> One possibility is that I could add a suspend function to EDAC that
> always fails with a helpful message like "Suspend with EDAC not
> supported." If someone wants to suspend, they'll have to take the
> EDAC out of the device tree so its probe will bomb out. I'm not
> sure how normal it is to have suspend functions in the kernel
> that always fail, though.
"Interesting" solution, but better than config exclusion, I'd say.
> > > + /*
> > > + * This code assumes that the bootloader has already
> > > + * properly configured the sdram controller:
> >
> > Which bootloaders can do that?
>
> Whatever bootloader is configuring the sdram controller for the
> board.
Ok, so direct question: will mainline u-boot 2015.04 configure the
controller correctly?
> > > + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3
> > > + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8
> > > + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512
> >
> > Would it make sense to configure it in Linux?
>
> The bootloader is responsible for configuring the sdram
> controller with parameters appropriate for whatever vendor's DDR
> is on the board, so that's where this must go.
>
> Now I realize I should make this message more general, since it is
> true for the socfpga cyclone5 devkit, but may need to be adjusted
> for other boards.
Aha, ok, the comment really needs to be fixed.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html