Removed the workarounds present in the cadence i2c driver for
Zynq Ultrascale+ MPSoC
Signed-off-by: Anurag Kumar Vulisha <[email protected]>
---
.../devicetree/bindings/i2c/i2c-cadence.txt | 2 +-
drivers/i2c/busses/i2c-cadence.c | 67 ++++++++++++++++---
2 files changed, 57 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
index 7cb0b56..11ef7f2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
@@ -2,7 +2,7 @@ Binding for the Cadence I2C controller
Required properties:
- reg: Physical base address and size of the controller's register area.
- - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
+ - compatible: Compatibility string.Use 'cdns,i2c-r1p10' or 'cdns,i2c-r1p14'
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt bindings.
- #address-cells: Should be 1.
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 2ee78e0..6ad1571 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
/* Register offsets for the I2C device. */
#define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */
@@ -113,6 +114,8 @@
#define CDNS_I2C_TIMEOUT_MAX 0xFF
+#define CDNS_I2C_BROKEN_HOLD_BIT 0x00000001
+
#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
@@ -135,6 +138,7 @@
* @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
* @clk: Pointer to struct clk
* @clk_rate_change_nb: Notifier block for clock rate changes
+ * @quirks: flag for broken hold bit usage in r1p10
*/
struct cdns_i2c {
void __iomem *membase;
@@ -154,6 +158,11 @@ struct cdns_i2c {
unsigned int bus_hold_flag;
struct clk *clk;
struct notifier_block clk_rate_change_nb;
+ u32 quirks;
+};
+
+struct cdns_platform_data {
+ u32 quirks;
};
#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
@@ -172,6 +181,12 @@ static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
}
+static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
+{
+ return (hold_wrkaround &&
+ (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
+}
+
/**
* cdns_i2c_isr - Interrupt handler for the I2C device
* @irq: irq number for the I2C device
@@ -186,6 +201,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
{
unsigned int isr_status, avail_bytes, updatetx;
unsigned int bytes_to_send;
+ bool hold_quirk;
struct cdns_i2c *id = ptr;
/* Signal completion only after everything is updated */
int done_flag = 0;
@@ -208,6 +224,8 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
if (id->recv_count > id->curr_recv_count)
updatetx = 1;
+ hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
+
/* When receiving, handle data interrupt and completion interrupt */
if (id->p_recv_buf &&
((isr_status & CDNS_I2C_IXR_COMP) ||
@@ -229,8 +247,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
id->recv_count--;
id->curr_recv_count--;
- if (updatetx &&
- (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1))
+ if (cdns_is_holdquirk(id, hold_quirk))
break;
}
@@ -241,8 +258,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
* maintain transfer size non-zero while performing a large
* receive operation.
*/
- if (updatetx &&
- (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) {
+ if (cdns_is_holdquirk(id, hold_quirk)) {
/* wait while fifo is full */
while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
(id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
@@ -264,6 +280,22 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
CDNS_I2C_XFER_SIZE_OFFSET);
id->curr_recv_count = id->recv_count;
}
+ } else if (id->recv_count && !hold_quirk &&
+ !id->curr_recv_count) {
+
+ /* Set the slave address in address register*/
+ cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
+
+ if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
+ cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
+ } else {
+ cdns_i2c_writereg(id->recv_count,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ id->curr_recv_count = id->recv_count;
+ }
}
/* Clear hold (if not repeated start) and signal completion */
@@ -535,11 +567,13 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int ret, count;
u32 reg;
struct cdns_i2c *id = adap->algo_data;
+ bool hold_quirk;
/* Check if the bus is free */
if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA)
return -EAGAIN;
+ hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT);
/*
* Set the flag to one when multiple messages are to be
* processed with a repeated start.
@@ -552,7 +586,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
* followed by any other message, an error is returned
* indicating that this sequence is not supported.
*/
- for (count = 0; count < num - 1; count++) {
+ for (count = 0; (count < num - 1 && hold_quirk); count++) {
if (msgs[count].flags & I2C_M_RD) {
dev_warn(adap->dev.parent,
"Can't do repeated start after a receive message\n");
@@ -815,6 +849,16 @@ static int __maybe_unused cdns_i2c_resume(struct device *_dev)
static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend,
cdns_i2c_resume);
+static const struct cdns_platform_data r1p10_i2c_def = {
+ .quirks = CDNS_I2C_BROKEN_HOLD_BIT, };
+
+static const struct of_device_id cdns_i2c_of_match[] = {
+ { .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def },
+ { .compatible = "cdns,i2c-r1p14",},
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
+
/**
* cdns_i2c_probe - Platform registration call
* @pdev: Handle to the platform device structure
@@ -830,6 +874,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
struct resource *r_mem;
struct cdns_i2c *id;
int ret;
+ const struct of_device_id *match;
id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
if (!id)
@@ -837,6 +882,12 @@ static int cdns_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, id);
+ match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node);
+ if (match && match->data) {
+ const struct cdns_platform_data *data = match->data;
+ id->quirks = data->quirks;
+ }
+
r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
if (IS_ERR(id->membase))
@@ -935,12 +986,6 @@ static int cdns_i2c_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id cdns_i2c_of_match[] = {
- { .compatible = "cdns,i2c-r1p10", },
- { /* end of table */ }
-};
-MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
-
static struct platform_driver cdns_i2c_drv = {
.driver = {
.name = DRIVER_NAME,
--
1.7.4
On Thu, Jun 18, 2015 at 05:19:42PM +0100, Anurag Kumar Vulisha wrote:
> Removed the workarounds present in the cadence i2c driver for
> Zynq Ultrascale+ MPSoC
I guess this means that cdns,i2c-r1p10 had quirks fixed in
cdns,i2c-r1p14? It would be helpful to be a bit more explicit in the
commit message.
>
> Signed-off-by: Anurag Kumar Vulisha <[email protected]>
> ---
> .../devicetree/bindings/i2c/i2c-cadence.txt | 2 +-
> drivers/i2c/busses/i2c-cadence.c | 67 ++++++++++++++++---
> 2 files changed, 57 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
> index 7cb0b56..11ef7f2 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt
> @@ -2,7 +2,7 @@ Binding for the Cadence I2C controller
>
> Required properties:
> - reg: Physical base address and size of the controller's register area.
> - - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
> + - compatible: Compatibility string.Use 'cdns,i2c-r1p10' or 'cdns,i2c-r1p14'
Please format this as a list. It aids legibility and expansion. e.g:
- compatible: should contain one of:
* "cdns,i2c-r1p10"
* "cdns,i2c-r1p14"
Perhaps with notes as to the differences.
Thanks,
Mark.
Hi,
thanks for the submission!
> +#define CDNS_I2C_BROKEN_HOLD_BIT 0x00000001
BIT(0) maybe?
> +static const struct cdns_platform_data r1p10_i2c_def = {
> + .quirks = CDNS_I2C_BROKEN_HOLD_BIT, };
Closing '}' should be on seperate line.
And what Mark said.
Other than that, looks okay I'd say.
Hi,
Thanks for reviewing the code. I will make the changes as said and send the patch as v2.
Thanks,
Anurag Kumar V
> -----Original Message-----
> From: Wolfram Sang [mailto:[email protected]]
> Sent: Friday, July 10, 2015 1:39 AM
> To: Anurag Kumar Vulisha
> Cc: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; Michal Simek; Soren
> Brinkmann; [email protected]; [email protected]; linux-
> [email protected]; [email protected]; Punnaiah
> Choudary Kalluri; Harini Katakam; Anirudha Sarangi; Srikanth Vemula; Anurag
> Kumar Vulisha
> Subject: Re: [PATCH] i2c: removed work arounds in i2c driver for Zynq
> Ultrascale+ MPSoC
>
> Hi,
>
> thanks for the submission!
>
> > +#define CDNS_I2C_BROKEN_HOLD_BIT 0x00000001
>
> BIT(0) maybe?
>
> > +static const struct cdns_platform_data r1p10_i2c_def = {
> > + .quirks = CDNS_I2C_BROKEN_HOLD_BIT, };
>
> Closing '}' should be on seperate line.
>
> And what Mark said.
>
> Other than that, looks okay I'd say.
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.