This patch fix a spelling typo in cciss.txt
Signed-off-by: Masanari Iida <[email protected]>
---
Documentation/blockdev/cciss.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index b79d0a13e7cd..3a5477cc456e 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart Array controllers is to
act as a RAID controller for disk drives, so the vast majority of commands
are allocated for disk devices. However, if you have more than a few tape
drives attached to a smart array, the default number of commands may not be
-enought (for example, if you have 8 tape drives, you could only rewind 6
+enough (for example, if you have 8 tape drives, you could only rewind 6
at one time with the default number of commands.) The cciss_tape_cmds module
parameter allows more commands (up to 16 more) to be allocated for use by
tape drives. For example:
--
2.10.1.502.g6598894
> -----Original Message-----
> From: Masanari Iida [mailto:[email protected]]
> Sent: Thursday, October 20, 2016 3:00 PM
> To: Don Brace; [email protected]; [email protected]; linux-
> [email protected]
> Cc: Masanari Iida
> Subject: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
>
> EXTERNAL EMAIL
>
>
> This patch fix a spelling typo in cciss.txt
>
> Signed-off-by: Masanari Iida <[email protected]>
> ---
> Documentation/blockdev/cciss.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/blockdev/cciss.txt
> b/Documentation/blockdev/cciss.txt
> index b79d0a13e7cd..3a5477cc456e 100644
> --- a/Documentation/blockdev/cciss.txt
> +++ b/Documentation/blockdev/cciss.txt
> @@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart
> Array controllers is to
> act as a RAID controller for disk drives, so the vast majority of commands
> are allocated for disk devices. However, if you have more than a few tape
> drives attached to a smart array, the default number of commands may not
> be
> -enought (for example, if you have 8 tape drives, you could only rewind 6
> +enough (for example, if you have 8 tape drives, you could only rewind 6
> at one time with the default number of commands.) The cciss_tape_cmds
> module
> parameter allows more commands (up to 16 more) to be allocated for use by
> tape drives. For example:
> --
> 2.10.1.502.g6598894
Acked-by: Don Brace <[email protected]>
On Fri, 21 Oct 2016 04:59:32 +0900
Masanari Iida <[email protected]> wrote:
> This patch fix a spelling typo in cciss.txt
Applied to the docs tree, thanks.
jon