My ongoing audit looking for non-modular code that needlessly uses
modular macros (vs. built-in equivalents) and/or has dead code
relating to module unloading that can never be executed led to the
creation of these s390 related commits.
For anyone new to the underlying goal of this cleanup, we are trying to
not use module support for code that can never be built as a module since:
(1) it is easy to accidentally write unused module_exit and remove code
(2) it can be misleading when reading the source, thinking it can be
modular when the Makefile and/or Kconfig prohibit it
(3) it requires the include of the module.h header file which in turn
includes nearly everything else, thus adding to CPP overhead.
(4) it gets copied/replicated into other code and spreads like weeds.
Build tested on current linux-next (allyes/allno/allmod) to ensure no
silly typos or implicit include issues that would break compilation
crept in.
---
Cc: Arnd Bergmann <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Cc: Martin Schwidefsky <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Sebastian Ott <[email protected]>
Paul Gortmaker (9):
s390: cio: make it explicitly non-modular
s390: char: make zcore explicitly non-modular
s390: char: make con3215 explicitly non-modular
s390: char: make sclp_tty explicitly non-modular
s390: char: make slcp_quiesce explicitly non-modular
s390: hotplug: make pci_hpc explicitly non-modular
s390: hypfs: make inode explicitly non-modular
s390: kernel: make lgr explicitly non-modular
s390: virtio: make ccw explicitly non-modular
arch/s390/hypfs/inode.c | 24 ++++--------------------
arch/s390/kernel/lgr.c | 5 +++--
drivers/pci/hotplug/s390_pci_hpc.c | 7 ++-----
drivers/s390/char/con3215.c | 12 +-----------
drivers/s390/char/sclp_quiesce.c | 4 +---
drivers/s390/char/sclp_tty.c | 3 +--
drivers/s390/char/zcore.c | 20 +-------------------
drivers/s390/cio/cmf.c | 10 ++--------
drivers/s390/cio/css.c | 6 +++---
drivers/s390/cio/device.c | 6 +++---
drivers/s390/cio/device_ops.c | 5 +++--
drivers/s390/virtio/virtio_ccw.c | 25 ++-----------------------
12 files changed, 26 insertions(+), 101 deletions(-)
--
2.10.1
The Makefile currently controlling compilation of this code is:
obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \
fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o
ccw_device-objs += device.o device_fsm.o device_ops.o
ccw_device-objs += device_id.o device_pgid.o device_status.o
obj-y += ccw_device.o cmf.o
...meaning that the files here are not being built as modular.
Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We replace module.h with export.h where the file does export some
symbols.
Cc: Sebastian Ott <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/cio/cmf.c | 10 ++--------
drivers/s390/cio/css.c | 6 +++---
drivers/s390/cio/device.c | 6 +++---
drivers/s390/cio/device_ops.c | 5 +++--
4 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 268aa23afa01..6b6386e9a500 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -30,7 +30,7 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/list.h>
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/timex.h> /* get_tod_clock() */
@@ -1389,13 +1389,7 @@ static int __init init_cmf(void)
"%s (mode %s)\n", format_string, detect_string);
return 0;
}
-module_init(init_cmf);
-
-
-MODULE_AUTHOR("Arnd Bergmann <[email protected]>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("channel measurement facility base driver\n"
- "Copyright IBM Corp. 2003\n");
+device_initcall(init_cmf);
EXPORT_SYMBOL_GPL(enable_cmf);
EXPORT_SYMBOL_GPL(disable_cmf);
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 3d2b20ee613f..bc099b61394d 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -5,12 +5,14 @@
*
* Author(s): Arnd Bergmann ([email protected])
* Cornelia Huck ([email protected])
+ *
+ * License: GPL
*/
#define KMSG_COMPONENT "cio"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/slab.h>
@@ -1285,5 +1287,3 @@ void css_driver_unregister(struct css_driver *cdrv)
driver_unregister(&cdrv->drv);
}
EXPORT_SYMBOL_GPL(css_driver_unregister);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 6a58bc8f46e2..79823ee9c100 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -5,12 +5,14 @@
* Author(s): Arnd Bergmann ([email protected])
* Cornelia Huck ([email protected])
* Martin Schwidefsky ([email protected])
+ *
+ * License: GPL
*/
#define KMSG_COMPONENT "cio"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
@@ -145,7 +147,6 @@ static struct css_device_id io_subchannel_ids[] = {
{ .match_flags = 0x1, .type = SUBCHANNEL_TYPE_IO, },
{ /* end of list */ },
};
-MODULE_DEVICE_TABLE(css, io_subchannel_ids);
static int io_subchannel_prepare(struct subchannel *sch)
{
@@ -2150,7 +2151,6 @@ int ccw_device_siosl(struct ccw_device *cdev)
}
EXPORT_SYMBOL_GPL(ccw_device_siosl);
-MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ccw_device_set_online);
EXPORT_SYMBOL(ccw_device_set_offline);
EXPORT_SYMBOL(ccw_driver_register);
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 877d9f601e63..cf8c4ac6323a 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -3,8 +3,10 @@
*
* Author(s): Martin Schwidefsky ([email protected])
* Cornelia Huck ([email protected])
+ *
+ * License: GPL
*/
-#include <linux/module.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -676,7 +678,6 @@ void ccw_device_get_schid(struct ccw_device *cdev, struct subchannel_id *schid)
}
EXPORT_SYMBOL_GPL(ccw_device_get_schid);
-MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ccw_device_set_options_mask);
EXPORT_SYMBOL(ccw_device_set_options);
EXPORT_SYMBOL(ccw_device_clear_options);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
drivers/s390/char/Kconfig:config SCLP_TTY
drivers/s390/char/Kconfig: def_bool y
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We don't replace module.h with init.h since the file already has that.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/char/sclp_tty.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 3c6e174e19b6..9259017a1295 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -7,7 +7,6 @@
* Martin Schwidefsky <[email protected]>
*/
-#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
@@ -573,4 +572,4 @@ sclp_tty_init(void)
sclp_tty_driver = driver;
return 0;
}
-module_init(sclp_tty_init);
+device_initcall(sclp_tty_init);
--
2.10.1
The Makefile currently controlling compilation of this code is obj-y
meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We replace module.h with init.h and export.h since the file does
export some symbols.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
arch/s390/kernel/lgr.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/lgr.c b/arch/s390/kernel/lgr.c
index 6ea6d69339b5..ae7dff110054 100644
--- a/arch/s390/kernel/lgr.c
+++ b/arch/s390/kernel/lgr.c
@@ -5,7 +5,8 @@
* Author(s): Michael Holzheu <[email protected]>
*/
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <asm/facility.h>
@@ -183,4 +184,4 @@ static int __init lgr_init(void)
lgr_timer_set();
return 0;
}
-module_init(lgr_init);
+device_initcall(lgr_init);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
arch/s390/Kconfig:config S390_GUEST
arch/s390/Kconfig: def_bool y
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We replace module.h with moduleparam.h since the file does declare
some module_param() and leaving that as-is is currently the easiest
way to remain compatible with existing boot arg use cases.
Cc: Christian Borntraeger <[email protected]>
Cc: Cornelia Huck <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/virtio/virtio_ccw.c | 25 ++-----------------------
1 file changed, 2 insertions(+), 23 deletions(-)
diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
index 8688ad4c825f..639ed4e6afd1 100644
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -24,7 +24,7 @@
#include <linux/wait.h>
#include <linux/list.h>
#include <linux/bitops.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/io.h>
#include <linux/kvm_para.h>
#include <linux/notifier.h>
@@ -235,16 +235,6 @@ static struct airq_info *new_airq_info(void)
return info;
}
-static void destroy_airq_info(struct airq_info *info)
-{
- if (!info)
- return;
-
- unregister_adapter_interrupt(&info->airq);
- airq_iv_release(info->aiv);
- kfree(info);
-}
-
static unsigned long get_airq_indicator(struct virtqueue *vqs[], int nvqs,
u64 *first, void **airq_info)
{
@@ -1294,7 +1284,6 @@ static struct ccw_device_id virtio_ids[] = {
{ CCW_DEVICE(0x3832, 0) },
{},
};
-MODULE_DEVICE_TABLE(ccw, virtio_ids);
static struct ccw_driver virtio_ccw_driver = {
.driver = {
@@ -1406,14 +1395,4 @@ static int __init virtio_ccw_init(void)
no_auto_parse();
return ccw_driver_register(&virtio_ccw_driver);
}
-module_init(virtio_ccw_init);
-
-static void __exit virtio_ccw_exit(void)
-{
- int i;
-
- ccw_driver_unregister(&virtio_ccw_driver);
- for (i = 0; i < MAX_AIRQ_AREAS; i++)
- destroy_airq_info(airq_areas[i]);
-}
-module_exit(virtio_ccw_exit);
+device_initcall(virtio_ccw_init);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
drivers/pci/hotplug/Kconfig:config HOTPLUG_PCI_S390
drivers/pci/hotplug/Kconfig: bool "System z PCI Hotplug Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We don't exchange module.h for init.h or export.h since the file
does not contain any initcalls or EXPORT of symbols.
Cc: Sebastian Ott <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/pci/hotplug/s390_pci_hpc.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c
index 50b8b7d54416..530d0e49f2ed 100644
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -5,12 +5,13 @@
*
* Author(s):
* Jan Glauber <[email protected]>
+ *
+ * License: GPL
*/
#define KMSG_COMPONENT "zpci"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/pci.h>
@@ -21,10 +22,6 @@
#define SLOT_NAME_SIZE 10
static LIST_HEAD(s390_hotplug_slot_list);
-MODULE_AUTHOR("Jan Glauber <[email protected]");
-MODULE_DESCRIPTION("Hot Plug PCI Controller for System z");
-MODULE_LICENSE("GPL");
-
static int zpci_fn_configured(enum zpci_state state)
{
return state == ZPCI_FN_STATE_CONFIGURED ||
--
2.10.1
The Makefile currently controlling compilation of this code is obj-y,
meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/char/sclp_quiesce.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/s390/char/sclp_quiesce.c b/drivers/s390/char/sclp_quiesce.c
index 475e470d9768..e4958511168a 100644
--- a/drivers/s390/char/sclp_quiesce.c
+++ b/drivers/s390/char/sclp_quiesce.c
@@ -6,7 +6,6 @@
* Peter Oberparleiter <[email protected]>
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpumask.h>
#include <linux/smp.h>
@@ -80,5 +79,4 @@ static int __init sclp_quiesce_init(void)
{
return sclp_register(&sclp_quiesce_event);
}
-
-module_init(sclp_quiesce_init);
+device_initcall(sclp_quiesce_init);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
drivers/s390/char/Kconfig:config TN3215
drivers/s390/char/Kconfig: def_bool y
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We don't replace module.h with init.h since the file already has that.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/char/con3215.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 931d10e86837..1b8d825623bd 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -9,7 +9,6 @@
* Dan Morrison, IBM Corporation <[email protected]>
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/tty.h>
@@ -1215,13 +1214,4 @@ static int __init tty3215_init(void)
tty3215_driver = driver;
return 0;
}
-
-static void __exit tty3215_exit(void)
-{
- tty_unregister_driver(tty3215_driver);
- put_tty_driver(tty3215_driver);
- ccw_driver_unregister(&raw3215_ccw_driver);
-}
-
-module_init(tty3215_init);
-module_exit(tty3215_exit);
+device_initcall(tty3215_init);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
arch/s390/Kconfig:config CRASH_DUMP
arch/s390/Kconfig: bool "kernel crash dumps"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init wasn't even being used by this file, the init
ordering remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We don't replace module.h with init.h since the file already has that.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
drivers/s390/char/zcore.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 16992e2a40ad..5aea89a92ff4 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -7,6 +7,7 @@
*
* Copyright IBM Corp. 2003, 2008
* Author(s): Michael Holzheu
+ * License: GPL
*/
#define KMSG_COMPONENT "zdump"
@@ -16,7 +17,6 @@
#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/debugfs.h>
-#include <linux/module.h>
#include <linux/memblock.h>
#include <asm/asm-offsets.h>
@@ -364,22 +364,4 @@ static int __init zcore_init(void)
diag308(DIAG308_REL_HSA, NULL);
return rc;
}
-
-static void __exit zcore_exit(void)
-{
- debug_unregister(zcore_dbf);
- sclp_sdias_exit();
- free_page((unsigned long) ipl_block);
- debugfs_remove(zcore_hsa_file);
- debugfs_remove(zcore_reipl_file);
- debugfs_remove(zcore_memmap_file);
- debugfs_remove(zcore_dir);
- diag308(DIAG308_REL_HSA, NULL);
-}
-
-MODULE_AUTHOR("Copyright IBM Corp. 2003,2008");
-MODULE_DESCRIPTION("zcore module for zfcpdump support");
-MODULE_LICENSE("GPL");
-
subsys_initcall(zcore_init);
-module_exit(zcore_exit);
--
2.10.1
The Kconfig currently controlling compilation of this code is:
arch/s390/Kconfig:config S390_HYPFS_FS
arch/s390/Kconfig: def_bool y
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_ALIAS is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Build testing indicated the presence of module.h was masking an
implicit include of kobject.h, hence the addition of that.
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
---
arch/s390/hypfs/inode.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 09bccb224d03..cf8a2d92467f 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -3,6 +3,7 @@
*
* Copyright IBM Corp. 2006, 2008
* Author(s): Michael Holzheu <[email protected]>
+ * License: GPL
*/
#define KMSG_COMPONENT "hypfs"
@@ -18,7 +19,8 @@
#include <linux/time.h>
#include <linux/parser.h>
#include <linux/sysfs.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kobject.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include <linux/uio.h>
@@ -443,7 +445,6 @@ static struct file_system_type hypfs_type = {
.mount = hypfs_mount,
.kill_sb = hypfs_kill_super
};
-MODULE_ALIAS_FS("s390_hypfs");
static const struct super_operations hypfs_s_ops = {
.statfs = simple_statfs,
@@ -497,21 +498,4 @@ static int __init hypfs_init(void)
pr_err("Initialization of hypfs failed with rc=%i\n", rc);
return rc;
}
-
-static void __exit hypfs_exit(void)
-{
- unregister_filesystem(&hypfs_type);
- sysfs_remove_mount_point(hypervisor_kobj, "s390");
- hypfs_diag0c_exit();
- hypfs_sprp_exit();
- hypfs_vm_exit();
- hypfs_diag_exit();
- hypfs_dbfs_exit();
-}
-
-module_init(hypfs_init)
-module_exit(hypfs_exit)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Holzheu <[email protected]>");
-MODULE_DESCRIPTION("s390 Hypervisor Filesystem");
+device_initcall(hypfs_init)
--
2.10.1
On Sun, Oct 30, 2016 at 04:37:23PM -0400, Paul Gortmaker wrote:
> My ongoing audit looking for non-modular code that needlessly uses
> modular macros (vs. built-in equivalents) and/or has dead code
> relating to module unloading that can never be executed led to the
> creation of these s390 related commits.
>
> For anyone new to the underlying goal of this cleanup, we are trying to
> not use module support for code that can never be built as a module since:
>
> (1) it is easy to accidentally write unused module_exit and remove code
> (2) it can be misleading when reading the source, thinking it can be
> modular when the Makefile and/or Kconfig prohibit it
> (3) it requires the include of the module.h header file which in turn
> includes nearly everything else, thus adding to CPP overhead.
> (4) it gets copied/replicated into other code and spreads like weeds.
>
> Build tested on current linux-next (allyes/allno/allmod) to ensure no
> silly typos or implicit include issues that would break compilation
> crept in.
>
> Paul Gortmaker (9):
> s390: cio: make it explicitly non-modular
> s390: char: make zcore explicitly non-modular
> s390: char: make con3215 explicitly non-modular
> s390: char: make sclp_tty explicitly non-modular
> s390: char: make slcp_quiesce explicitly non-modular
> s390: hotplug: make pci_hpc explicitly non-modular
> s390: hypfs: make inode explicitly non-modular
> s390: kernel: make lgr explicitly non-modular
> s390: virtio: make ccw explicitly non-modular
Whole series applied. Thanks!
On Sun, 30 Oct 2016 16:37:32 -0400
Paul Gortmaker <[email protected]> wrote:
> The Kconfig currently controlling compilation of this code is:
>
> arch/s390/Kconfig:config S390_GUEST
> arch/s390/Kconfig: def_bool y
>
> ...meaning that it currently is not being built as a module by anyone.
>
> Lets remove the modular code that is essentially orphaned, so that
> when reading the driver there is no doubt it is builtin-only.
>
> Since module_init translates to device_initcall in the non-modular
> case, the init ordering remains unchanged with this commit.
>
> Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
>
> We replace module.h with moduleparam.h since the file does declare
> some module_param() and leaving that as-is is currently the easiest
> way to remain compatible with existing boot arg use cases.
>
> Cc: Christian Borntraeger <[email protected]>
> Cc: Cornelia Huck <[email protected]>
> Cc: Martin Schwidefsky <[email protected]>
> Cc: Heiko Carstens <[email protected]>
> Cc: [email protected]
> Signed-off-by: Paul Gortmaker <[email protected]>
> ---
> drivers/s390/virtio/virtio_ccw.c | 25 ++-----------------------
> 1 file changed, 2 insertions(+), 23 deletions(-)
There might actually be a case for making this modular, as the
virtio-pci transport can be built as a module as well. But I don't
think anybody really cares, and your patch is easily reverted should we
want to do this later, so
Acked-by: Cornelia Huck <[email protected]>
[going through the s390 tree with the other patches is probably easier
as taking this through the virtio tree]