Everyone:
This patch series is v16 of the driver for supervisory processor found
on RAVE series of devices from ZII. Supervisory processor is a PIC
microcontroller connected to various electrical subsystems on RAVE
devices whose firmware implements protocol to command/qery them.
NOTE:
* This driver dependends on crc_ccitt_false(), added by
2da9378d531f8cc6670c7497f20d936b706ab80b in 'linux-next', the patch
was pulled in by Andrew Morton and is currently avaiting users, so
this series might have to go in through Andrew's tree
Changes since [v15]:
- Adopted SPDX tags for licensing information per Philippe's
request
Changes since [v14]:
- Fixed a bug in deframer code where byte processing loop was not
being terminated early is it should've been. This would result,
among other things, in packets of maximum valid length being
incorrectly reported as tool long.
- Increased command timeout value in support other valid commands
that are outsied of scope for this patch set.
- Converted watchdog driver to differentiate between variants
based on its own compatiblity string as opposed to relying on
that of parent MFD device (as per request by Johan and Lee).
NOTE: This change didn't seem to change DT bingins enough to
warrant dropping any Acks for patches affected, so I kept
them. If anyone wants to rescind their Ack, please let me know.
- Collected Acked-by from Pavel
- Collected Acked-by from Lee (for patch 3/5)
Changes since [v13]:
- Fixed incorrect MFD driver menuconfig entry placement
Changes since [v12]:
- Minor comment inconsistencies fixes in rave-sp.c
Changes since [v11]:
- Fix incorrect include in rave-sp-wdt.c as uncovered by kernel
test robot
Changes since [v10]:
- Collected Acked-by from Rob and Reviewed-by from Guenter
- Incorporated watchdog driver feedback from Gunter and Johan
- Incorporated Johan's feedback for the rest of the code
Changes since [v9]:
- Converted watchdog driver to use watchdog_active() instead of
watchdog_hw_running() and replaced WARN_ON with a regular error
message as per feedback from Guenter
- Changed rave_sp_wdt_start() to set WDOG_HW_RUNNING only if
communicating with hardware was sucessful
- Collected Reviewd-by from Sebastian (for serdev related patches)
- Collected Acked-by from Rob (for watchdog DT bindings)
Changes since [v8]:
- Driver moved from drivers/platform to drivers/mfd
- Collected Reviewed-by from Guenter (for patches 1, 2 and 3)
- Incorporated feedback from Guenter into watchdog driver
- Incorporated feedback from Rob into watchdog DT bindings
- Removed struct rave_sp_rsp_status, which was a leftover from v5
-> v6 code removal.
- Fixed minor problems reported by checkpatch
Changes since [v7]:
- Added watchdog driver to the patchset, so it would be easier to
understand how parent/children drivers are tied together
- Added serdev patches to implement devm_serdev_device_open() and make .remove optional
- "Added" missing serdev_device_close() by converting the driver
to use devm_serdev_device_open()
- Converted the driver to use devm_of_platform_populate()
- Removed needless dependency on MFD_CORE
- Removed dependency on SERIAL_DEV_CTRL_TTYPORT
Changes since [v6]:
- Patch 2/2 has been applied by Lee so it is no longer a part of the series
- Removed all sysfs and debugfs attribute to reduce the scope of
the driver propsed for inclusion. This is not a critical to have
feature and can be added/discussed later.
Changes since [v5]:
- Fixed a build break, introduced by a last minute change in [v5]
- Moved majority of attributes that were exposed over sysfs to debugfs
- Document remaining sysfs attributes in Documentation/ABI/testing/sysfs-platform-rave-sp
Changes since [v4]:
- Replaced usage of DEVICE_ATTR with DEVICE_ATTR_RW
- Fixed a number of warnings produces by sparse tool
- Incorporated event more feedback from Andy Shevchenko
- Collected Reviewed-by from Andy
Changes since [v3]:
- Re-collected lost Acked-by from Rob
- Incorporated further feedback from Andy Shevchenko
- Dropped useless change (stray newline) to drivers/mfd/Makefile
Changes since [v2]:
- Fixed swapped command codes in rave_sp_common_get_boot_source()
and rave_sp_common_set_boot_source() revealed by further testing
of the code
- Incorporated feedback from Andy Shevchenko
Changes since [v1]:
- Updated wording in DT-bindings as per Rob's request.
- Collected Rob's Acked-by for patch 2/2
Feedback is greatly appreciated!
Thanks,
Andrey Smirnov
[v15] lkml.kernel.org/r/[email protected]
[v14] lkml.kernel.org/r/[email protected]
[v13] lkml.kernel.org/r/[email protected]
[v12] lkml.kernel.org/r/[email protected]
[v11] lkml.kernel.org/r/[email protected]
[v10] lkml.kernel.org/r/[email protected]
[v9] lkml.kernel.org/r/[email protected]
[v8] lkml.kernel.org/r/[email protected]
[v7] lkml.kernel.org/r/[email protected]
[v6] lkml.kernel.org/r/[email protected]
[v5] lkml.kernel.org/r/[email protected]
[v4] lkml.kernel.org/r/[email protected]
[v3] lkml.kernel.org/r/[email protected]
[v2] lkml.kernel.org/r/[email protected]
[v1] lkml.kernel.org/r/[email protected]
Andrey Smirnov (5):
serdev: Make .remove in struct serdev_device_driver optional
serdev: Introduce devm_serdev_device_open()
mfd: Add driver for RAVE Supervisory Processor
watchdog: Add RAVE SP watchdog driver
dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
.../bindings/watchdog/zii,rave-sp-wdt.txt | 39 ++
Documentation/driver-model/devres.txt | 3 +
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 2 +
drivers/mfd/rave-sp.c | 710 +++++++++++++++++++++
drivers/tty/serdev/core.c | 31 +-
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rave-sp-wdt.c | 337 ++++++++++
include/linux/mfd/rave-sp.h | 60 ++
include/linux/serdev.h | 1 +
11 files changed, 1197 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
create mode 100644 drivers/mfd/rave-sp.c
create mode 100644 drivers/watchdog/rave-sp-wdt.c
create mode 100644 include/linux/mfd/rave-sp.h
--
2.14.3
Add code implementing managed version of serdev_device_open() for
serdev device drivers that "open" the device during driver's lifecycle
only once (e.g. opened in .probe() and closed in .remove()).
Cc: [email protected]
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Cc: Guenter Roeck <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Nikita Yushchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
---
Documentation/driver-model/devres.txt | 3 +++
drivers/tty/serdev/core.c | 27 +++++++++++++++++++++++++++
include/linux/serdev.h | 1 +
3 files changed, 31 insertions(+)
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index c180045eb43b..7c1bb3d0c222 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -384,6 +384,9 @@ RESET
devm_reset_control_get()
devm_reset_controller_register()
+SERDEV
+ devm_serdev_device_open()
+
SLAVE DMA ENGINE
devm_acpi_dma_controller_register()
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 34050b439c1f..28133dbd2808 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -132,6 +132,33 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
+static void devm_serdev_device_release(struct device *dev, void *dr)
+{
+ serdev_device_close(*(struct serdev_device **)dr);
+}
+
+int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev)
+{
+ struct serdev_device **dr;
+ int ret;
+
+ dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ ret = serdev_device_open(serdev);
+ if (ret) {
+ devres_free(dr);
+ return ret;
+ }
+
+ *dr = serdev;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_serdev_device_open);
+
void serdev_device_write_wakeup(struct serdev_device *serdev)
{
complete(&serdev->write_comp);
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index e69402d4a8ae..9929063bd45d 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -193,6 +193,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
int serdev_device_open(struct serdev_device *);
void serdev_device_close(struct serdev_device *);
+int devm_serdev_device_open(struct device *, struct serdev_device *);
unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
void serdev_device_set_flow_control(struct serdev_device *, bool);
int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);
--
2.14.3
Add a driver for RAVE Supervisory Processor, an MCU implementing
various bits of housekeeping functionality (watchdoging, backlight
control, LED control, etc) on RAVE family of products by Zodiac
Inflight Innovations.
This driver implementes core MFD/serdev device as well as
communication subroutines necessary for commanding the device.
Cc: [email protected]
Cc: [email protected]
Cc: Lucas Stach <[email protected]>
Cc: Nikita Yushchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Tested-by: Chris Healy <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
---
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 2 +
drivers/mfd/rave-sp.c | 710 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/rave-sp.h | 60 ++++
4 files changed, 780 insertions(+)
create mode 100644 drivers/mfd/rave-sp.c
create mode 100644 include/linux/mfd/rave-sp.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1d20a800e967..ec90d408bfa9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1859,5 +1859,13 @@ config MFD_VEXPRESS_SYSREG
System Registers are the platform configuration block
on the ARM Ltd. Versatile Express board.
+config RAVE_SP_CORE
+ tristate "RAVE SP MCU core driver"
+ depends on SERIAL_DEV_BUS
+ select CRC_CCITT
+ help
+ Select this to get support for the Supervisory Processor
+ device found on several devices in RAVE line of hardware.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index d9474ade32e6..61abc297b97c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -230,3 +230,5 @@ obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
+obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
+
diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
new file mode 100644
index 000000000000..33efb5f14d07
--- /dev/null
+++ b/drivers/mfd/rave-sp.c
@@ -0,0 +1,710 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Multifunction core driver for Zodiac Inflight Innovations RAVE
+ * Supervisory Processor(SP) MCU that is connected via dedicated UART
+ * port
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+#include <linux/atomic.h>
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/sched.h>
+#include <linux/serdev.h>
+#include <asm/unaligned.h>
+
+/*
+ * UART protocol using following entities:
+ * - message to MCU => ACK response
+ * - event from MCU => event ACK
+ *
+ * Frame structure:
+ * <STX> <DATA> <CHECKSUM> <ETX>
+ * Where:
+ * - STX - is start of transmission character
+ * - ETX - end of transmission
+ * - DATA - payload
+ * - CHECKSUM - checksum calculated on <DATA>
+ *
+ * If <DATA> or <CHECKSUM> contain one of control characters, then it is
+ * escaped using <DLE> control code. Added <DLE> does not participate in
+ * checksum calculation.
+ */
+#define RAVE_SP_STX 0x02
+#define RAVE_SP_ETX 0x03
+#define RAVE_SP_DLE 0x10
+
+#define RAVE_SP_MAX_DATA_SIZE 64
+#define RAVE_SP_CHECKSUM_SIZE 2 /* Worst case scenario on RDU2 */
+/*
+ * We don't store STX, ETX and unescaped bytes, so Rx is only
+ * DATA + CSUM
+ */
+#define RAVE_SP_RX_BUFFER_SIZE \
+ (RAVE_SP_MAX_DATA_SIZE + RAVE_SP_CHECKSUM_SIZE)
+
+#define RAVE_SP_STX_ETX_SIZE 2
+/*
+ * For Tx we have to have space for everything, STX, EXT and
+ * potentially stuffed DATA + CSUM data + csum
+ */
+#define RAVE_SP_TX_BUFFER_SIZE \
+ (RAVE_SP_STX_ETX_SIZE + 2 * RAVE_SP_RX_BUFFER_SIZE)
+
+#define RAVE_SP_BOOT_SOURCE_GET 0
+#define RAVE_SP_BOOT_SOURCE_SET 1
+
+#define RAVE_SP_RDU2_BOARD_TYPE_RMB 0
+#define RAVE_SP_RDU2_BOARD_TYPE_DEB 1
+
+#define RAVE_SP_BOOT_SOURCE_SD 0
+#define RAVE_SP_BOOT_SOURCE_EMMC 1
+#define RAVE_SP_BOOT_SOURCE_NOR 2
+
+/**
+ * enum rave_sp_deframer_state - Possible state for de-framer
+ *
+ * @RAVE_SP_EXPECT_SOF: Scanning input for start-of-frame marker
+ * @RAVE_SP_EXPECT_DATA: Got start of frame marker, collecting frame
+ * @RAVE_SP_EXPECT_ESCAPED_DATA: Got escape character, collecting escaped byte
+ */
+enum rave_sp_deframer_state {
+ RAVE_SP_EXPECT_SOF,
+ RAVE_SP_EXPECT_DATA,
+ RAVE_SP_EXPECT_ESCAPED_DATA,
+};
+
+/**
+ * struct rave_sp_deframer - Device protocol deframer
+ *
+ * @state: Current state of the deframer
+ * @data: Buffer used to collect deframed data
+ * @length: Number of bytes de-framed so far
+ */
+struct rave_sp_deframer {
+ enum rave_sp_deframer_state state;
+ unsigned char data[RAVE_SP_RX_BUFFER_SIZE];
+ size_t length;
+};
+
+/**
+ * struct rave_sp_reply - Reply as per RAVE device protocol
+ *
+ * @length: Expected reply length
+ * @data: Buffer to store reply payload in
+ * @code: Expected reply code
+ * @ackid: Expected reply ACK ID
+ * @completion: Successful reply reception completion
+ */
+struct rave_sp_reply {
+ size_t length;
+ void *data;
+ u8 code;
+ u8 ackid;
+ struct completion received;
+};
+
+/**
+ * struct rave_sp_checksum - Variant specific checksum implementation details
+ *
+ * @length: Caculated checksum length
+ * @subroutine: Utilized checksum algorithm implementation
+ */
+struct rave_sp_checksum {
+ size_t length;
+ void (*subroutine)(const u8 *, size_t, u8 *);
+};
+
+/**
+ * struct rave_sp_variant_cmds - Variant specific command routines
+ *
+ * @translate: Generic to variant specific command mapping routine
+ *
+ */
+struct rave_sp_variant_cmds {
+ int (*translate)(enum rave_sp_command);
+};
+
+/**
+ * struct rave_sp_variant - RAVE supervisory processor core variant
+ *
+ * @checksum: Variant specific checksum implementation
+ * @cmd: Variant specific command pointer table
+ *
+ */
+struct rave_sp_variant {
+ const struct rave_sp_checksum *checksum;
+ struct rave_sp_variant_cmds cmd;
+};
+
+/**
+ * struct rave_sp - RAVE supervisory processor core
+ *
+ * @serdev: Pointer to underlying serdev
+ * @deframer: Stored state of the protocol deframer
+ * @ackid: ACK ID used in last reply sent to the device
+ * @bus_lock: Lock to serialize access to the device
+ * @reply_lock: Lock protecting @reply
+ * @reply: Pointer to memory to store reply payload
+ *
+ * @variant: Device variant specific information
+ * @event_notifier_list: Input event notification chain
+ *
+ */
+struct rave_sp {
+ struct serdev_device *serdev;
+ struct rave_sp_deframer deframer;
+ atomic_t ackid;
+ struct mutex bus_lock;
+ struct mutex reply_lock;
+ struct rave_sp_reply *reply;
+
+ const struct rave_sp_variant *variant;
+ struct blocking_notifier_head event_notifier_list;
+};
+
+static bool rave_sp_id_is_event(u8 code)
+{
+ return (code & 0xF0) == RAVE_SP_EVNT_BASE;
+}
+
+static void rave_sp_unregister_event_notifier(struct device *dev, void *res)
+{
+ struct rave_sp *sp = dev_get_drvdata(dev->parent);
+ struct notifier_block *nb = *(struct notifier_block **)res;
+ struct blocking_notifier_head *bnh = &sp->event_notifier_list;
+
+ WARN_ON(blocking_notifier_chain_unregister(bnh, nb));
+}
+
+int devm_rave_sp_register_event_notifier(struct device *dev,
+ struct notifier_block *nb)
+{
+ struct rave_sp *sp = dev_get_drvdata(dev->parent);
+ struct notifier_block **rcnb;
+ int ret;
+
+ rcnb = devres_alloc(rave_sp_unregister_event_notifier,
+ sizeof(*rcnb), GFP_KERNEL);
+ if (!rcnb)
+ return -ENOMEM;
+
+ ret = blocking_notifier_chain_register(&sp->event_notifier_list, nb);
+ if (!ret) {
+ *rcnb = nb;
+ devres_add(dev, rcnb);
+ } else {
+ devres_free(rcnb);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_rave_sp_register_event_notifier);
+
+static void csum_8b2c(const u8 *buf, size_t size, u8 *crc)
+{
+ *crc = *buf++;
+ size--;
+
+ while (size--)
+ *crc += *buf++;
+
+ *crc = 1 + ~(*crc);
+}
+
+static void csum_ccitt(const u8 *buf, size_t size, u8 *crc)
+{
+ const u16 calculated = crc_ccitt_false(0xffff, buf, size);
+
+ /*
+ * While the rest of the wire protocol is little-endian,
+ * CCITT-16 CRC in RDU2 device is sent out in big-endian order.
+ */
+ put_unaligned_be16(calculated, crc);
+}
+
+static void *stuff(unsigned char *dest, const unsigned char *src, size_t n)
+{
+ while (n--) {
+ const unsigned char byte = *src++;
+
+ switch (byte) {
+ case RAVE_SP_STX:
+ case RAVE_SP_ETX:
+ case RAVE_SP_DLE:
+ *dest++ = RAVE_SP_DLE;
+ /* FALLTHROUGH */
+ default:
+ *dest++ = byte;
+ }
+ }
+
+ return dest;
+}
+
+static int rave_sp_write(struct rave_sp *sp, const u8 *data, u8 data_size)
+{
+ const size_t checksum_length = sp->variant->checksum->length;
+ unsigned char frame[RAVE_SP_TX_BUFFER_SIZE];
+ unsigned char crc[RAVE_SP_CHECKSUM_SIZE];
+ unsigned char *dest = frame;
+ size_t length;
+
+ if (WARN_ON(checksum_length > sizeof(crc)))
+ return -ENOMEM;
+
+ if (WARN_ON(data_size > sizeof(frame)))
+ return -ENOMEM;
+
+ sp->variant->checksum->subroutine(data, data_size, crc);
+
+ *dest++ = RAVE_SP_STX;
+ dest = stuff(dest, data, data_size);
+ dest = stuff(dest, crc, checksum_length);
+ *dest++ = RAVE_SP_ETX;
+
+ length = dest - frame;
+
+ print_hex_dump(KERN_DEBUG, "rave-sp tx: ", DUMP_PREFIX_NONE,
+ 16, 1, frame, length, false);
+
+ return serdev_device_write(sp->serdev, frame, length, HZ);
+}
+
+static u8 rave_sp_reply_code(u8 command)
+{
+ /*
+ * There isn't a single rule that describes command code ->
+ * ACK code transformation, but, going through various
+ * versions of ICDs, there appear to be three distinct groups
+ * that can be described by simple transformation.
+ */
+ switch (command) {
+ case 0xA0 ... 0xBE:
+ /*
+ * Commands implemented by firmware found in RDU1 and
+ * older devices all seem to obey the following rule
+ */
+ return command + 0x20;
+ case 0xE0 ... 0xEF:
+ /*
+ * Events emitted by all versions of the firmare use
+ * least significant bit to get an ACK code
+ */
+ return command | 0x01;
+ default:
+ /*
+ * Commands implemented by firmware found in RDU2 are
+ * similar to "old" commands, but they use slightly
+ * different offset
+ */
+ return command + 0x40;
+ }
+}
+
+int rave_sp_exec(struct rave_sp *sp,
+ void *__data, size_t data_size,
+ void *reply_data, size_t reply_data_size)
+{
+ struct rave_sp_reply reply = {
+ .data = reply_data,
+ .length = reply_data_size,
+ .received = COMPLETION_INITIALIZER_ONSTACK(reply.received),
+ };
+ unsigned char *data = __data;
+ int command, ret = 0;
+ u8 ackid;
+
+ command = sp->variant->cmd.translate(data[0]);
+ if (command < 0)
+ return command;
+
+ ackid = atomic_inc_return(&sp->ackid);
+ reply.ackid = ackid;
+ reply.code = rave_sp_reply_code((u8)command),
+
+ mutex_lock(&sp->bus_lock);
+
+ mutex_lock(&sp->reply_lock);
+ sp->reply = &reply;
+ mutex_unlock(&sp->reply_lock);
+
+ data[0] = command;
+ data[1] = ackid;
+
+ rave_sp_write(sp, data, data_size);
+
+ if (!wait_for_completion_timeout(&reply.received, HZ)) {
+ dev_err(&sp->serdev->dev, "Command timeout\n");
+ ret = -ETIMEDOUT;
+
+ mutex_lock(&sp->reply_lock);
+ sp->reply = NULL;
+ mutex_unlock(&sp->reply_lock);
+ }
+
+ mutex_unlock(&sp->bus_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rave_sp_exec);
+
+static void rave_sp_receive_event(struct rave_sp *sp,
+ const unsigned char *data, size_t length)
+{
+ u8 cmd[] = {
+ [0] = rave_sp_reply_code(data[0]),
+ [1] = data[1],
+ };
+
+ rave_sp_write(sp, cmd, sizeof(cmd));
+
+ blocking_notifier_call_chain(&sp->event_notifier_list,
+ rave_sp_action_pack(data[0], data[2]),
+ NULL);
+}
+
+static void rave_sp_receive_reply(struct rave_sp *sp,
+ const unsigned char *data, size_t length)
+{
+ struct device *dev = &sp->serdev->dev;
+ struct rave_sp_reply *reply;
+ const size_t payload_length = length - 2;
+
+ mutex_lock(&sp->reply_lock);
+ reply = sp->reply;
+
+ if (reply) {
+ if (reply->code == data[0] && reply->ackid == data[1] &&
+ payload_length >= reply->length) {
+ /*
+ * We are relying on memcpy(dst, src, 0) to be a no-op
+ * when handling commands that have a no-payload reply
+ */
+ memcpy(reply->data, &data[2], reply->length);
+ complete(&reply->received);
+ sp->reply = NULL;
+ } else {
+ dev_err(dev, "Ignoring incorrect reply\n");
+ dev_dbg(dev, "Code: expected = 0x%08x received = 0x%08x\n",
+ reply->code, data[0]);
+ dev_dbg(dev, "ACK ID: expected = 0x%08x received = 0x%08x\n",
+ reply->ackid, data[1]);
+ dev_dbg(dev, "Length: expected = %zu received = %zu\n",
+ reply->length, payload_length);
+ }
+ }
+
+ mutex_unlock(&sp->reply_lock);
+}
+
+static void rave_sp_receive_frame(struct rave_sp *sp,
+ const unsigned char *data,
+ size_t length)
+{
+ const size_t checksum_length = sp->variant->checksum->length;
+ const size_t payload_length = length - checksum_length;
+ const u8 *crc_reported = &data[payload_length];
+ struct device *dev = &sp->serdev->dev;
+ u8 crc_calculated[checksum_length];
+
+ print_hex_dump(KERN_DEBUG, "rave-sp rx: ", DUMP_PREFIX_NONE,
+ 16, 1, data, length, false);
+
+ if (unlikely(length <= checksum_length)) {
+ dev_warn(dev, "Dropping short frame\n");
+ return;
+ }
+
+ sp->variant->checksum->subroutine(data, payload_length,
+ crc_calculated);
+
+ if (memcmp(crc_calculated, crc_reported, checksum_length)) {
+ dev_warn(dev, "Dropping bad frame\n");
+ return;
+ }
+
+ if (rave_sp_id_is_event(data[0]))
+ rave_sp_receive_event(sp, data, length);
+ else
+ rave_sp_receive_reply(sp, data, length);
+}
+
+static int rave_sp_receive_buf(struct serdev_device *serdev,
+ const unsigned char *buf, size_t size)
+{
+ struct device *dev = &serdev->dev;
+ struct rave_sp *sp = dev_get_drvdata(dev);
+ struct rave_sp_deframer *deframer = &sp->deframer;
+ const unsigned char *src = buf;
+ const unsigned char *end = buf + size;
+
+ while (src < end) {
+ const unsigned char byte = *src++;
+
+ switch (deframer->state) {
+ case RAVE_SP_EXPECT_SOF:
+ if (byte == RAVE_SP_STX)
+ deframer->state = RAVE_SP_EXPECT_DATA;
+ break;
+
+ case RAVE_SP_EXPECT_DATA:
+ /*
+ * Treat special byte values first
+ */
+ switch (byte) {
+ case RAVE_SP_ETX:
+ rave_sp_receive_frame(sp,
+ deframer->data,
+ deframer->length);
+ /*
+ * Once we extracted a complete frame
+ * out of a stream, we call it done
+ * and proceed to bailing out while
+ * resetting the framer to initial
+ * state, regardless if we've consumed
+ * all of the stream or not.
+ */
+ goto reset_framer;
+ case RAVE_SP_STX:
+ dev_warn(dev, "Bad frame: STX before ETX\n");
+ /*
+ * If we encounter second "start of
+ * the frame" marker before seeing
+ * corresponding "end of frame", we
+ * reset the framer and ignore both:
+ * frame started by first SOF and
+ * frame started by current SOF.
+ *
+ * NOTE: The above means that only the
+ * frame started by third SOF, sent
+ * after this one will have a chance
+ * to get throught.
+ */
+ goto reset_framer;
+ case RAVE_SP_DLE:
+ deframer->state = RAVE_SP_EXPECT_ESCAPED_DATA;
+ /*
+ * If we encounter escape sequence we
+ * need to skip it and collect the
+ * byte that follows. We do it by
+ * forcing the next iteration of the
+ * encompassing while loop.
+ */
+ continue;
+ }
+ /*
+ * For the rest of the bytes, that are not
+ * speical snoflakes, we do the same thing
+ * that we do to escaped data - collect it in
+ * deframer buffer
+ */
+
+ /* FALLTHROUGH */
+
+ case RAVE_SP_EXPECT_ESCAPED_DATA:
+ deframer->data[deframer->length++] = byte;
+
+ if (deframer->length == sizeof(deframer->data)) {
+ dev_warn(dev, "Bad frame: Too long\n");
+ /*
+ * If the amount of data we've
+ * accumulated for current frame so
+ * far starts to exceed the capacity
+ * of deframer's buffer, there's
+ * nothing else we can do but to
+ * discard that data and start
+ * assemblying a new frame again
+ */
+ goto reset_framer;
+ }
+
+ /*
+ * We've extracted out special byte, now we
+ * can go back to regular data collecting
+ */
+ deframer->state = RAVE_SP_EXPECT_DATA;
+ break;
+ }
+ }
+
+ /*
+ * The only way to get out of the above loop and end up here
+ * is throught consuming all of the supplied data, so here we
+ * report that we processed it all.
+ */
+ return size;
+
+reset_framer:
+ /*
+ * NOTE: A number of codepaths that will drop us here will do
+ * so before consuming all 'size' bytes of the data passed by
+ * serdev layer. We rely on the fact that serdev layer will
+ * re-execute this handler with the remainder of the Rx bytes
+ * once we report actual number of bytes that we processed.
+ */
+ deframer->state = RAVE_SP_EXPECT_SOF;
+ deframer->length = 0;
+
+ return src - buf;
+}
+
+static int rave_sp_rdu1_cmd_translate(enum rave_sp_command command)
+{
+ if (command >= RAVE_SP_CMD_STATUS &&
+ command <= RAVE_SP_CMD_CONTROL_EVENTS)
+ return command;
+
+ return -EINVAL;
+}
+
+static int rave_sp_rdu2_cmd_translate(enum rave_sp_command command)
+{
+ if (command >= RAVE_SP_CMD_GET_FIRMWARE_VERSION &&
+ command <= RAVE_SP_CMD_GET_GPIO_STATE)
+ return command;
+
+ if (command == RAVE_SP_CMD_REQ_COPPER_REV) {
+ /*
+ * As per RDU2 ICD 3.4.47 CMD_GET_COPPER_REV code is
+ * different from that for RDU1 and it is set to 0x28.
+ */
+ return 0x28;
+ }
+
+ return rave_sp_rdu1_cmd_translate(command);
+}
+
+static int rave_sp_default_cmd_translate(enum rave_sp_command command)
+{
+ /*
+ * All of the following command codes were taken from "Table :
+ * Communications Protocol Message Types" in section 3.3
+ * "MESSAGE TYPES" of Rave PIC24 ICD.
+ */
+ switch (command) {
+ case RAVE_SP_CMD_GET_FIRMWARE_VERSION:
+ return 0x11;
+ case RAVE_SP_CMD_GET_BOOTLOADER_VERSION:
+ return 0x12;
+ case RAVE_SP_CMD_BOOT_SOURCE:
+ return 0x14;
+ case RAVE_SP_CMD_SW_WDT:
+ return 0x1C;
+ case RAVE_SP_CMD_RESET:
+ return 0x1E;
+ case RAVE_SP_CMD_RESET_REASON:
+ return 0x1F;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct rave_sp_checksum rave_sp_checksum_8b2c = {
+ .length = 1,
+ .subroutine = csum_8b2c,
+};
+
+static const struct rave_sp_checksum rave_sp_checksum_ccitt = {
+ .length = 2,
+ .subroutine = csum_ccitt,
+};
+
+static const struct rave_sp_variant rave_sp_legacy = {
+ .checksum = &rave_sp_checksum_8b2c,
+ .cmd = {
+ .translate = rave_sp_default_cmd_translate,
+ },
+};
+
+static const struct rave_sp_variant rave_sp_rdu1 = {
+ .checksum = &rave_sp_checksum_8b2c,
+ .cmd = {
+ .translate = rave_sp_rdu1_cmd_translate,
+ },
+};
+
+static const struct rave_sp_variant rave_sp_rdu2 = {
+ .checksum = &rave_sp_checksum_ccitt,
+ .cmd = {
+ .translate = rave_sp_rdu2_cmd_translate,
+ },
+};
+
+static const struct of_device_id rave_sp_dt_ids[] = {
+ { .compatible = "zii,rave-sp-niu", .data = &rave_sp_legacy },
+ { .compatible = "zii,rave-sp-mezz", .data = &rave_sp_legacy },
+ { .compatible = "zii,rave-sp-esb", .data = &rave_sp_legacy },
+ { .compatible = "zii,rave-sp-rdu1", .data = &rave_sp_rdu1 },
+ { .compatible = "zii,rave-sp-rdu2", .data = &rave_sp_rdu2 },
+ { /* sentinel */ }
+};
+
+static const struct serdev_device_ops rave_sp_serdev_device_ops = {
+ .receive_buf = rave_sp_receive_buf,
+ .write_wakeup = serdev_device_write_wakeup,
+};
+
+static int rave_sp_probe(struct serdev_device *serdev)
+{
+ struct device *dev = &serdev->dev;
+ struct rave_sp *sp;
+ u32 baud;
+ int ret;
+
+ if (of_property_read_u32(dev->of_node, "current-speed", &baud)) {
+ dev_err(dev,
+ "'current-speed' is not specified in device node\n");
+ return -EINVAL;
+ }
+
+ sp = devm_kzalloc(dev, sizeof(*sp), GFP_KERNEL);
+ if (!sp)
+ return -ENOMEM;
+
+ sp->serdev = serdev;
+ dev_set_drvdata(dev, sp);
+
+ sp->variant = of_device_get_match_data(dev);
+ if (!sp->variant)
+ return -ENODEV;
+
+ mutex_init(&sp->bus_lock);
+ mutex_init(&sp->reply_lock);
+ BLOCKING_INIT_NOTIFIER_HEAD(&sp->event_notifier_list);
+
+ serdev_device_set_client_ops(serdev, &rave_sp_serdev_device_ops);
+ ret = devm_serdev_device_open(dev, serdev);
+ if (ret)
+ return ret;
+
+ serdev_device_set_baudrate(serdev, baud);
+
+ return devm_of_platform_populate(dev);
+}
+
+MODULE_DEVICE_TABLE(of, rave_sp_dt_ids);
+
+static struct serdev_device_driver rave_sp_drv = {
+ .probe = rave_sp_probe,
+ .driver = {
+ .name = "rave-sp",
+ .of_match_table = rave_sp_dt_ids,
+ },
+};
+module_serdev_device_driver(rave_sp_drv);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <[email protected]>");
+MODULE_AUTHOR("Nikita Yushchenko <[email protected]>");
+MODULE_AUTHOR("Andrey Smirnov <[email protected]>");
+MODULE_DESCRIPTION("RAVE SP core driver");
diff --git a/include/linux/mfd/rave-sp.h b/include/linux/mfd/rave-sp.h
new file mode 100644
index 000000000000..796fb9794c9e
--- /dev/null
+++ b/include/linux/mfd/rave-sp.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Core definitions for RAVE SP MFD driver.
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+#ifndef _LINUX_RAVE_SP_H_
+#define _LINUX_RAVE_SP_H_
+
+#include <linux/notifier.h>
+
+enum rave_sp_command {
+ RAVE_SP_CMD_GET_FIRMWARE_VERSION = 0x20,
+ RAVE_SP_CMD_GET_BOOTLOADER_VERSION = 0x21,
+ RAVE_SP_CMD_BOOT_SOURCE = 0x26,
+ RAVE_SP_CMD_GET_BOARD_COPPER_REV = 0x2B,
+ RAVE_SP_CMD_GET_GPIO_STATE = 0x2F,
+
+ RAVE_SP_CMD_STATUS = 0xA0,
+ RAVE_SP_CMD_SW_WDT = 0xA1,
+ RAVE_SP_CMD_PET_WDT = 0xA2,
+ RAVE_SP_CMD_RESET = 0xA7,
+ RAVE_SP_CMD_RESET_REASON = 0xA8,
+
+ RAVE_SP_CMD_REQ_COPPER_REV = 0xB6,
+ RAVE_SP_CMD_GET_I2C_DEVICE_STATUS = 0xBA,
+ RAVE_SP_CMD_GET_SP_SILICON_REV = 0xB9,
+ RAVE_SP_CMD_CONTROL_EVENTS = 0xBB,
+
+ RAVE_SP_EVNT_BASE = 0xE0,
+};
+
+struct rave_sp;
+
+static inline unsigned long rave_sp_action_pack(u8 event, u8 value)
+{
+ return ((unsigned long)value << 8) | event;
+}
+
+static inline u8 rave_sp_action_unpack_event(unsigned long action)
+{
+ return action;
+}
+
+static inline u8 rave_sp_action_unpack_value(unsigned long action)
+{
+ return action >> 8;
+}
+
+int rave_sp_exec(struct rave_sp *sp,
+ void *__data, size_t data_size,
+ void *reply_data, size_t reply_data_size);
+
+struct device;
+int devm_rave_sp_register_event_notifier(struct device *dev,
+ struct notifier_block *nb);
+
+#endif /* _LINUX_RAVE_SP_H_ */
--
2.14.3
This driver provides access to RAVE SP watchdog functionality.
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Lucas Stach <[email protected]>
Cc: Nikita Yushchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Nikita Yushchenko <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
---
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rave-sp-wdt.c | 337 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 345 insertions(+)
create mode 100644 drivers/watchdog/rave-sp-wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ca200d1f310a..5bf613d3b7d6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -223,6 +223,13 @@ config ZIIRAVE_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called ziirave_wdt.
+config RAVE_SP_WATCHDOG
+ tristate "RAVE SP Watchdog timer"
+ depends on RAVE_SP_CORE
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog on RAVE SP device.
+
# ALPHA Architecture
# ARM Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 715a21078e0c..135c5e81f25e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -224,3 +224,4 @@ obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
+obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
diff --git a/drivers/watchdog/rave-sp-wdt.c b/drivers/watchdog/rave-sp-wdt.c
new file mode 100644
index 000000000000..caa5e37d2503
--- /dev/null
+++ b/drivers/watchdog/rave-sp-wdt.c
@@ -0,0 +1,337 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Driver for watchdog aspect of for Zodiac Inflight Innovations RAVE
+ * Supervisory Processor(SP) MCU
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovation
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+enum {
+ RAVE_SP_RESET_BYTE = 1,
+ RAVE_SP_RESET_REASON_NORMAL = 0,
+ RAVE_SP_RESET_DELAY_MS = 500,
+};
+
+/**
+ * struct rave_sp_wdt_variant - RAVE SP watchdog variant
+ *
+ * @max_timeout: Largest possible watchdog timeout setting
+ * @min_timeout: Smallest possible watchdog timeout setting
+ *
+ * @configure: Function to send configuration command
+ * @restart: Function to send "restart" command
+ */
+struct rave_sp_wdt_variant {
+ unsigned int max_timeout;
+ unsigned int min_timeout;
+
+ int (*configure)(struct watchdog_device *, bool);
+ int (*restart)(struct watchdog_device *);
+};
+
+/**
+ * struct rave_sp_wdt - RAVE SP watchdog
+ *
+ * @wdd: Underlying watchdog device
+ * @sp: Pointer to parent RAVE SP device
+ * @variant: Device specific variant information
+ * @reboot_notifier: Reboot notifier implementing machine reset
+ */
+struct rave_sp_wdt {
+ struct watchdog_device wdd;
+ struct rave_sp *sp;
+ const struct rave_sp_wdt_variant *variant;
+ struct notifier_block reboot_notifier;
+};
+
+static struct rave_sp_wdt *to_rave_sp_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct rave_sp_wdt, wdd);
+}
+
+static int rave_sp_wdt_exec(struct watchdog_device *wdd, void *data,
+ size_t data_size)
+{
+ return rave_sp_exec(to_rave_sp_wdt(wdd)->sp,
+ data, data_size, NULL, 0);
+}
+
+static int rave_sp_wdt_legacy_configure(struct watchdog_device *wdd, bool on)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_SW_WDT,
+ [1] = 0,
+ [2] = 0,
+ [3] = on,
+ [4] = on ? wdd->timeout : 0,
+ };
+
+ return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_configure(struct watchdog_device *wdd, bool on)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_SW_WDT,
+ [1] = 0,
+ [2] = on,
+ [3] = (u8)wdd->timeout,
+ [4] = (u8)(wdd->timeout >> 8),
+ };
+
+ return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+/**
+ * rave_sp_wdt_configure - Configure watchdog device
+ *
+ * @wdd: Device to configure
+ * @on: Desired state of the watchdog timer (ON/OFF)
+ *
+ * This function configures two aspects of the watchdog timer:
+ *
+ * - Wheither it is ON or OFF
+ * - Its timeout duration
+ *
+ * with first aspect specified via function argument and second via
+ * the value of 'wdd->timeout'.
+ */
+static int rave_sp_wdt_configure(struct watchdog_device *wdd, bool on)
+{
+ return to_rave_sp_wdt(wdd)->variant->configure(wdd, on);
+}
+
+static int rave_sp_wdt_legacy_restart(struct watchdog_device *wdd)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_RESET,
+ [1] = 0,
+ [2] = RAVE_SP_RESET_BYTE
+ };
+
+ return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_restart(struct watchdog_device *wdd)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_RESET,
+ [1] = 0,
+ [2] = RAVE_SP_RESET_BYTE,
+ [3] = RAVE_SP_RESET_REASON_NORMAL
+ };
+
+ return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ /*
+ * Restart handler is called in atomic context which means we
+ * can't communicate to SP via UART. Luckily for use SP will
+ * wait 500ms before actually resetting us, so we ask it to do
+ * so here and let the rest of the system go on wrapping
+ * things up.
+ */
+ if (action == SYS_DOWN || action == SYS_HALT) {
+ struct rave_sp_wdt *sp_wd =
+ container_of(nb, struct rave_sp_wdt, reboot_notifier);
+
+ const int ret = sp_wd->variant->restart(&sp_wd->wdd);
+
+ if (ret < 0)
+ dev_err(sp_wd->wdd.parent,
+ "Failed to issue restart command (%d)", ret);
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int rave_sp_wdt_restart(struct watchdog_device *wdd,
+ unsigned long action, void *data)
+{
+ /*
+ * The actual work was done by reboot notifier above. SP
+ * firmware waits 500 ms before issuing reset, so let's hang
+ * here for twice that delay and hopefuly we'd never reach
+ * the return statement.
+ */
+ mdelay(2 * RAVE_SP_RESET_DELAY_MS);
+
+ return -EIO;
+}
+
+static int rave_sp_wdt_start(struct watchdog_device *wdd)
+{
+ int ret;
+
+ ret = rave_sp_wdt_configure(wdd, true);
+ if (!ret)
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ return ret;
+}
+
+static int rave_sp_wdt_stop(struct watchdog_device *wdd)
+{
+ return rave_sp_wdt_configure(wdd, false);
+}
+
+static int rave_sp_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ wdd->timeout = timeout;
+
+ return rave_sp_wdt_configure(wdd, watchdog_active(wdd));
+}
+
+static int rave_sp_wdt_ping(struct watchdog_device *wdd)
+{
+ u8 cmd[] = {
+ [0] = RAVE_SP_CMD_PET_WDT,
+ [1] = 0,
+ };
+
+ return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static const struct watchdog_info rave_sp_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "RAVE SP Watchdog",
+};
+
+static const struct watchdog_ops rave_sp_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = rave_sp_wdt_start,
+ .stop = rave_sp_wdt_stop,
+ .ping = rave_sp_wdt_ping,
+ .set_timeout = rave_sp_wdt_set_timeout,
+ .restart = rave_sp_wdt_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_legacy = {
+ .max_timeout = 255,
+ .min_timeout = 1,
+ .configure = rave_sp_wdt_legacy_configure,
+ .restart = rave_sp_wdt_legacy_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_rdu = {
+ .max_timeout = 180,
+ .min_timeout = 60,
+ .configure = rave_sp_wdt_rdu_configure,
+ .restart = rave_sp_wdt_rdu_restart,
+};
+
+static const struct of_device_id rave_sp_wdt_of_match[] = {
+ {
+ .compatible = "zii,rave-sp-watchdog-legacy",
+ .data = &rave_sp_wdt_legacy,
+ },
+ {
+ .compatible = "zii,rave-sp-watchdog",
+ .data = &rave_sp_wdt_rdu,
+ },
+ { /* sentinel */ }
+};
+
+static int rave_sp_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct watchdog_device *wdd;
+ struct rave_sp_wdt *sp_wd;
+ struct nvmem_cell *cell;
+ __le16 timeout = 0;
+ int ret;
+
+ sp_wd = devm_kzalloc(dev, sizeof(*sp_wd), GFP_KERNEL);
+ if (!sp_wd)
+ return -ENOMEM;
+
+ sp_wd->variant = of_device_get_match_data(dev);
+ sp_wd->sp = dev_get_drvdata(dev->parent);
+
+ wdd = &sp_wd->wdd;
+ wdd->parent = dev;
+ wdd->info = &rave_sp_wdt_info;
+ wdd->ops = &rave_sp_wdt_ops;
+ wdd->min_timeout = sp_wd->variant->min_timeout;
+ wdd->max_timeout = sp_wd->variant->max_timeout;
+ wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+ wdd->timeout = 60;
+
+ cell = nvmem_cell_get(dev, "wdt-timeout");
+ if (!IS_ERR(cell)) {
+ size_t len;
+ void *value = nvmem_cell_read(cell, &len);
+
+ if (!IS_ERR(value)) {
+ memcpy(&timeout, value, min(len, sizeof(timeout)));
+ kfree(value);
+ }
+ nvmem_cell_put(cell);
+ }
+ watchdog_init_timeout(wdd, le16_to_cpu(timeout), dev);
+ watchdog_set_restart_priority(wdd, 255);
+ watchdog_stop_on_unregister(wdd);
+
+ sp_wd->reboot_notifier.notifier_call = rave_sp_wdt_reboot_notifier;
+ ret = devm_register_reboot_notifier(dev, &sp_wd->reboot_notifier);
+ if (ret) {
+ dev_err(dev, "Failed to register reboot notifier\n");
+ return ret;
+ }
+
+ /*
+ * We don't know if watchdog is running now. To be sure, let's
+ * start it and depend on watchdog core to ping it
+ */
+ wdd->max_hw_heartbeat_ms = wdd->max_timeout * 1000;
+ ret = rave_sp_wdt_start(wdd);
+ if (ret) {
+ dev_err(dev, "Watchdog didn't start\n");
+ return ret;
+ }
+
+ ret = devm_watchdog_register_device(dev, wdd);
+ if (ret) {
+ dev_err(dev, "Failed to register watchdog device\n");
+ rave_sp_wdt_stop(wdd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver rave_sp_wdt_driver = {
+ .probe = rave_sp_wdt_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = rave_sp_wdt_of_match,
+ },
+};
+
+module_platform_driver(rave_sp_wdt_driver);
+
+MODULE_DEVICE_TABLE(of, rave_sp_wdt_of_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <[email protected]>");
+MODULE_AUTHOR("Nikita Yushchenko <[email protected]>");
+MODULE_AUTHOR("Andrey Smirnov <[email protected]>");
+MODULE_DESCRIPTION("RAVE SP Watchdog driver");
+MODULE_ALIAS("platform:rave-sp-watchdog");
--
2.14.3
Add Device Tree bindings for RAVE SP watchdog drvier - an MFD cell of
parent RAVE SP driver (documented in
Documentation/devicetree/bindings/mfd/zii,rave-sp.txt).
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Lucas Stach <[email protected]>
Cc: Nikita Yushchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Nikita Yushchenko <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
---
.../bindings/watchdog/zii,rave-sp-wdt.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
new file mode 100644
index 000000000000..3de96186e92e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
@@ -0,0 +1,39 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings
+
+RAVE SP watchdog device is a "MFD cell" device corresponding to
+watchdog functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Depending on wire protocol implemented by RAVE SP
+ firmware, should be one of:
+ - "zii,rave-sp-watchdog"
+ - "zii,rave-sp-watchdog-legacy"
+
+Optional properties:
+
+- wdt-timeout: Two byte nvmem cell specified as per
+ Documentation/devicetree/bindings/nvmem/nvmem.txt
+
+Example:
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu1";
+ current-speed = <38400>;
+
+ eeprom {
+ wdt_timeout: wdt-timeout@8E {
+ reg = <0x8E 2>;
+ };
+ };
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ nvmem-cells = <&wdt_timeout>;
+ nvmem-cell-names = "wdt-timeout";
+ };
+ }
+
--
2.14.3
Using devres infrastructure it is possible to write a serdev driver
that doesn't have any code that needs to be called as a part of
.remove. Add code to make .remove optional.
Cc: [email protected]
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: [email protected]
Cc: Guenter Roeck <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Nikita Yushchenko <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
---
drivers/tty/serdev/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 1bef39828ca7..34050b439c1f 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -268,8 +268,8 @@ static int serdev_drv_probe(struct device *dev)
static int serdev_drv_remove(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
-
- sdrv->remove(to_serdev_device(dev));
+ if (sdrv->remove)
+ sdrv->remove(to_serdev_device(dev));
return 0;
}
--
2.14.3
Andrey,
On Wed, Dec 20, 2017 at 9:45 PM, Andrey Smirnov
<[email protected]> wrote:
> Everyone:
>
> This patch series is v16 of the driver for supervisory processor found
> on RAVE series of devices from ZII. Supervisory processor is a PIC
> microcontroller connected to various electrical subsystems on RAVE
> devices whose firmware implements protocol to command/qery them.
>
> NOTE:
>
> * This driver dependends on crc_ccitt_false(), added by
> 2da9378d531f8cc6670c7497f20d936b706ab80b in 'linux-next', the patch
> was pulled in by Andrew Morton and is currently avaiting users, so
> this series might have to go in through Andrew's tree
>
> Changes since [v15]:
>
> - Adopted SPDX tags for licensing information per Philippe's
> request
Thank you for using the SPDX tags: you have my cheerful ack for the
SPDX tags for the whole patch set
There is one minor problem though: your comment style for the SPDX tag
lines. Check Thomas doc patches and Linus comments on this topic: you
should use // C++ style commnent in .c files and /* */ C-style
comments in .h files.
e.g. do not use this for a .c file:
> +++ b/drivers/watchdog/rave-sp-wdt.c
> @@ -0,0 +1,337 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
But this instead:
> +++ b/drivers/watchdog/rave-sp-wdt.c
> @@ -0,0 +1,337 @@
> +// SPDX-License-Identifier: GPL-2.0+
Acked-by: Philippe Ombredanne <[email protected]>
--
Cordially
Philippe
On Wed, Dec 20, 2017 at 1:51 PM, Philippe Ombredanne
<[email protected]> wrote:
> Andrey,
>
> On Wed, Dec 20, 2017 at 9:45 PM, Andrey Smirnov
> <[email protected]> wrote:
>> Everyone:
>>
>> This patch series is v16 of the driver for supervisory processor found
>> on RAVE series of devices from ZII. Supervisory processor is a PIC
>> microcontroller connected to various electrical subsystems on RAVE
>> devices whose firmware implements protocol to command/qery them.
>>
>> NOTE:
>>
>> * This driver dependends on crc_ccitt_false(), added by
>> 2da9378d531f8cc6670c7497f20d936b706ab80b in 'linux-next', the patch
>> was pulled in by Andrew Morton and is currently avaiting users, so
>> this series might have to go in through Andrew's tree
>>
>> Changes since [v15]:
>>
>> - Adopted SPDX tags for licensing information per Philippe's
>> request
>
> Thank you for using the SPDX tags: you have my cheerful ack for the
> SPDX tags for the whole patch set
>
> There is one minor problem though: your comment style for the SPDX tag
> lines. Check Thomas doc patches and Linus comments on this topic: you
> should use // C++ style commnent in .c files and /* */ C-style
> comments in .h files.
>
> e.g. do not use this for a .c file:
>
>> +++ b/drivers/watchdog/rave-sp-wdt.c
>> @@ -0,0 +1,337 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>
> But this instead:
>
>> +++ b/drivers/watchdog/rave-sp-wdt.c
>> @@ -0,0 +1,337 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>
>
> Acked-by: Philippe Ombredanne <[email protected]>
>
OK, good to know, will fix in v17 soon.
Thanks,
Andrey Smirnov
Hi Andrey,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on linus/master]
[also build test ERROR on v4.15-rc4]
[cannot apply to next-20171222]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Andrey-Smirnov/ZII-RAVE-platform-driver/20171223-132544
config: i386-allmodconfig (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
drivers/mfd/rave-sp.c: In function 'csum_ccitt':
>> drivers/mfd/rave-sp.c:227:25: error: implicit declaration of function 'crc_ccitt_false'; did you mean 'crc_ccitt_byte'? [-Werror=implicit-function-declaration]
const u16 calculated = crc_ccitt_false(0xffff, buf, size);
^~~~~~~~~~~~~~~
crc_ccitt_byte
cc1: some warnings being treated as errors
vim +227 drivers/mfd/rave-sp.c
224
225 static void csum_ccitt(const u8 *buf, size_t size, u8 *crc)
226 {
> 227 const u16 calculated = crc_ccitt_false(0xffff, buf, size);
228
229 /*
230 * While the rest of the wire protocol is little-endian,
231 * CCITT-16 CRC in RDU2 device is sent out in big-endian order.
232 */
233 put_unaligned_be16(calculated, crc);
234 }
235
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation