This is the start of the stable review cycle for the 4.19.46 release.
There are 114 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat 25 May 2019 06:15:02 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.46-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.46-rc1
Daniel Borkmann <[email protected]>
bpf, lru: avoid messing with eviction heuristics upon syscall lookup
Daniel Borkmann <[email protected]>
bpf: add map_lookup_elem_sys_only for lookups from syscall side
Chenbo Feng <[email protected]>
bpf: relax inode permission check for retrieving bpf program
Greg Kroah-Hartman <[email protected]>
Revert "selftests/bpf: skip verifier tests for unsupported program types"
John Garry <[email protected]>
driver core: Postpone DMA tear-down until after devres release for probe failure
Nigel Croxon <[email protected]>
md/raid: raid5 preserve the writeback action after the parity check
Song Liu <[email protected]>
Revert "Don't jump to compute_result state from check_result state"
Jiri Olsa <[email protected]>
perf/x86/intel: Fix race in intel_pmu_disable_event()
Arnaldo Carvalho de Melo <[email protected]>
perf bench numa: Add define for RUSAGE_THREAD if not present
Al Viro <[email protected]>
ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour
Gary Hook <[email protected]>
x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
Tobin C. Harding <[email protected]>
sched/cpufreq: Fix kobject memleak
Luca Coelho <[email protected]>
iwlwifi: mvm: check for length correctness in iwl_mvm_create_skb()
Bjørn Mork <[email protected]>
qmi_wwan: new Wistron, ZTE and D-Link devices
Peter Zijlstra <[email protected]>
bpf: Fix preempt_enable_no_resched() abuse
Andrey Smirnov <[email protected]>
power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG
Andrew Jones <[email protected]>
KVM: arm/arm64: Ensure vcpu target is unset on reset failure
Kangjie Lu <[email protected]>
net: ieee802154: fix missing checks for regmap_update_bits
Bhagavathi Perumal S <[email protected]>
mac80211: Fix kernel panic due to use of txq after free
Vitaly Kuznetsov <[email protected]>
x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012
Logan Gunthorpe <[email protected]>
PCI: Fix issue with "pci=disable_acs_redir" parameter being ignored
Al Viro <[email protected]>
apparmorfs: fix use-after-free on symlink traversal
Al Viro <[email protected]>
securityfs: fix use-after-free on symlink traversal
Tony Lindgren <[email protected]>
power: supply: cpcap-battery: Fix division by zero
Jernej Skrabec <[email protected]>
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
Steffen Klassert <[email protected]>
xfrm4: Fix uninitialized memory read in _decode_session4
Martin Willi <[email protected]>
xfrm: Honor original L3 slave device in xfrmi policy lookup
Sabrina Dubroca <[email protected]>
esp4: add length check for UDP encapsulation
Cong Wang <[email protected]>
xfrm: clean up xfrm protocol checks
Jeremy Sowden <[email protected]>
vti4: ipip tunnel deregistration fixes.
Su Yanjun <[email protected]>
xfrm6_tunnel: Fix potential panic when unloading xfrm6_tunnel module
YueHaibing <[email protected]>
xfrm: policy: Fix out-of-bound array accesses in __xfrm_policy_unlink
Kirill Smelkov <[email protected]>
fuse: Add FOPEN_STREAM to use stream_open()
Martin Wilck <[email protected]>
dm mpath: always free attached_handler_name in parse_path()
Mikulas Patocka <[email protected]>
dm integrity: correctly calculate the size of metadata area
Mikulas Patocka <[email protected]>
dm delay: fix a crash when invalid device is specified
Damien Le Moal <[email protected]>
dm zoned: Fix zone report handling
Nikos Tsironis <[email protected]>
dm cache metadata: Fix loading discard bitset
Stefan Mätje <[email protected]>
PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum
Stefan Mätje <[email protected]>
PCI: Factor out pcie_retrain_link() function
Kazufumi Ikeda <[email protected]>
PCI: rcar: Add the initialization of PCIe link in resume_noirq()
Jisheng Zhang <[email protected]>
PCI/AER: Change pci_aer_init() stub to return void
Jean-Philippe Brucker <[email protected]>
PCI: Init PCIe feature bits for managed host bridge alloc
James Prestwood <[email protected]>
PCI: Mark Atheros AR9462 to avoid bus reset
Nikolai Kostrigin <[email protected]>
PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken
Yifeng Li <[email protected]>
fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting
Yifeng Li <[email protected]>
fbdev: sm712fb: use 1024x768 by default on non-MIPS, fix garbled display
Yifeng Li <[email protected]>
fbdev: sm712fb: fix support for 1024x768-16 mode
Yifeng Li <[email protected]>
fbdev: sm712fb: fix crashes during framebuffer writes by correctly mapping VRAM
Yifeng Li <[email protected]>
fbdev: sm712fb: fix boot screen glitch when sm712fb replaces VGA
Yifeng Li <[email protected]>
fbdev: sm712fb: fix white screen of death on reboot, don't set CR3B-CR3F
Yifeng Li <[email protected]>
fbdev: sm712fb: fix VRAM detection, don't set SR70/71/74/75
Yifeng Li <[email protected]>
fbdev: sm712fb: fix brightness control on reboot, don't set SR30
Ard Biesheuvel <[email protected]>
fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types
Nathan Chancellor <[email protected]>
objtool: Allow AR to be overridden with HOSTAR
Florian Fainelli <[email protected]>
MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled
Adrian Hunter <[email protected]>
perf intel-pt: Fix sample timestamp wrt non-taken branches
Adrian Hunter <[email protected]>
perf intel-pt: Fix improved sample timestamp
Adrian Hunter <[email protected]>
perf intel-pt: Fix instructions sampling rate
Dmitry Osipenko <[email protected]>
memory: tegra: Fix integer overflow on tick value calculation
Elazar Leibovich <[email protected]>
tracing: Fix partial reading of trace event's id file
Peter Zijlstra <[email protected]>
ftrace/x86_64: Emulate call function while updating in breakpoint handler
Peter Zijlstra <[email protected]>
x86_64: Allow breakpoints to emulate call instructions
Josh Poimboeuf <[email protected]>
x86_64: Add gap to int3 to allow for call emulation
Jeff Layton <[email protected]>
ceph: flush dirty inodes before proceeding with remount
Dmitry Osipenko <[email protected]>
iommu/tegra-smmu: Fix invalid ASID bits on Tegra30/114
Amir Goldstein <[email protected]>
ovl: fix missing upper fs freeze protection on copy up for ioctl
Liu Bo <[email protected]>
fuse: honor RLIMIT_FSIZE in fuse_file_fallocate
Miklos Szeredi <[email protected]>
fuse: fix writepages on 32bit
Mikulas Patocka <[email protected]>
udlfb: introduce a rendering mutex
Mikulas Patocka <[email protected]>
udlfb: fix sleeping inside spinlock
Mikulas Patocka <[email protected]>
udlfb: delete the unused parameter for dlfb_handle_damage
Jonas Karlman <[email protected]>
clk: rockchip: fix wrong clock definitions for rk3328
Owen Chen <[email protected]>
clk: mediatek: Disable tuner_en before change PLL rate
Dmitry Osipenko <[email protected]>
clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
Leo Yan <[email protected]>
clk: hi3660: Mark clk_gate_ufs_subsys as critical
Olga Kornievskaia <[email protected]>
PNFS fallback to MDS if no deviceid found
ZhangXiaoxu <[email protected]>
NFS4: Fix v4.0 client state corruption when mount
Steve Longerbeam <[email protected]>
media: imx: Clear fwnode link struct for each endpoint iteration
Steve Longerbeam <[email protected]>
media: imx: csi: Allow unknown nearest upstream entities
Janusz Krzysztofik <[email protected]>
media: ov6650: Fix sensor possibly not detected on probe
Colin Ian King <[email protected]>
phy: ti-pipe3: fix missing bit-wise or operator when assigning val
Christoph Probst <[email protected]>
cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level()
Phong Tran <[email protected]>
of: fix clang -Wunsequenced for be32_to_cpu()
Pan Bian <[email protected]>
p54: drop device reference count if fails to enable device
Alexander Shishkin <[email protected]>
intel_th: msu: Fix single mode with IOMMU
Al Viro <[email protected]>
dcache: sort the freeing-without-RCU-delay mess for good.
Yufen Yu <[email protected]>
md: add mddev->pers to avoid potential NULL pointer dereference
NeilBrown <[email protected]>
md: batch flush requests.
NeilBrown <[email protected]>
Revert "MD: fix lock contention for flush bios"
Paul Moore <[email protected]>
proc: prevent changes to overridden credentials
Hou Tao <[email protected]>
brd: re-enable __GFP_HIGHMEM in brd_insert_page()
Alexander Shishkin <[email protected]>
stm class: Fix channel bitmap on 32-bit systems
Tingwei Zhang <[email protected]>
stm class: Fix channel free in stm output free path
Helge Deller <[email protected]>
parisc: Rename LEVEL to PA_ASM_LEVEL to avoid name clash with DRBD code
Helge Deller <[email protected]>
parisc: Use PA_ASM_LEVEL in boot code
Helge Deller <[email protected]>
parisc: Skip registering LED when running in QEMU
Helge Deller <[email protected]>
parisc: Export running_on_qemu symbol for modules
Saeed Mahameed <[email protected]>
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
Saeed Mahameed <[email protected]>
net/mlx5: Imply MLXFW in mlx5_core
Jorge E. Moreira <[email protected]>
vsock/virtio: Initialize core virtio vsock before registering the driver
Junwei Hu <[email protected]>
tipc: fix modprobe tipc failed after switch order of device registration
Stefano Garzarella <[email protected]>
vsock/virtio: free packets during the socket release
Junwei Hu <[email protected]>
tipc: switch order of device registration to fix a crash
Sabrina Dubroca <[email protected]>
rtnetlink: always put IFLA_LINK for links with a link-netnsid
YueHaibing <[email protected]>
ppp: deflate: Fix possible crash in deflate_init
Pieter Jansen van Vuuren <[email protected]>
nfp: flower: add rcu locks when accessing netdev for tunnels
Daniele Palmas <[email protected]>
net: usb: qmi_wwan: add Telit 0x1260 and 0x1261 compositions
Willem de Bruijn <[email protected]>
net: test nouarg before dereferencing zerocopy pointers
Yunjian Wang <[email protected]>
net/mlx4_core: Change the error print to info print
Eric Dumazet <[email protected]>
net: avoid weird emergency message
Florian Fainelli <[email protected]>
net: Always descend into dsa/
Eric Dumazet <[email protected]>
ipv6: prevent possible fib6 leaks
Wei Wang <[email protected]>
ipv6: fix src addr routing with the exception table
-------------
Diffstat:
Documentation/filesystems/porting | 5 +
Makefile | 4 +-
arch/mips/kernel/perf_event_mipsxx.c | 21 +-
arch/parisc/boot/compressed/head.S | 6 +-
arch/parisc/include/asm/assembly.h | 6 +-
arch/parisc/kernel/head.S | 4 +-
arch/parisc/kernel/process.c | 1 +
arch/parisc/kernel/syscall.S | 2 +-
arch/x86/entry/entry_64.S | 18 +-
arch/x86/events/intel/core.c | 10 +-
arch/x86/include/asm/text-patching.h | 28 +++
arch/x86/kernel/ftrace.c | 32 ++-
arch/x86/kvm/hyperv.c | 11 +-
arch/x86/lib/Makefile | 12 +
drivers/base/dd.c | 5 +-
drivers/block/brd.c | 7 +-
drivers/clk/hisilicon/clk-hi3660.c | 6 +-
drivers/clk/mediatek/clk-pll.c | 48 ++--
drivers/clk/rockchip/clk-rk3328.c | 18 +-
drivers/clk/sunxi-ng/ccu_nkmp.c | 18 +-
drivers/clk/tegra/clk-pll.c | 4 +-
drivers/hwtracing/intel_th/msu.c | 35 ++-
drivers/hwtracing/stm/core.c | 9 +-
drivers/iommu/tegra-smmu.c | 25 ++-
drivers/md/dm-cache-metadata.c | 9 +-
drivers/md/dm-delay.c | 3 +-
drivers/md/dm-integrity.c | 4 +-
drivers/md/dm-mpath.c | 2 +-
drivers/md/dm-zoned-metadata.c | 5 +
drivers/md/md.c | 182 +++++++---------
drivers/md/md.h | 25 +--
drivers/md/raid5.c | 29 ++-
drivers/media/i2c/ov6650.c | 2 +
drivers/memory/tegra/mc.c | 2 +-
drivers/net/Makefile | 2 +-
drivers/net/ethernet/mellanox/mlx4/mcg.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 1 +
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 18 +-
.../ethernet/netronome/nfp/flower/tunnel_conf.c | 17 +-
drivers/net/ieee802154/mcr20a.c | 6 +
drivers/net/ppp/ppp_deflate.c | 20 +-
drivers/net/usb/qmi_wwan.c | 12 +
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 28 ++-
drivers/net/wireless/intersil/p54/p54pci.c | 3 +-
drivers/parisc/led.c | 3 +
drivers/pci/controller/pcie-rcar.c | 21 ++
drivers/pci/pci.c | 19 +-
drivers/pci/pci.h | 2 +-
drivers/pci/pcie/aspm.c | 49 +++--
drivers/pci/probe.c | 23 +-
drivers/pci/quirks.c | 19 ++
drivers/phy/ti/phy-ti-pipe3.c | 2 +-
drivers/power/supply/cpcap-battery.c | 3 +
drivers/power/supply/power_supply_sysfs.c | 6 -
drivers/staging/media/imx/imx-media-csi.c | 18 +-
drivers/staging/media/imx/imx-media-of.c | 15 +-
drivers/video/fbdev/efifb.c | 8 +-
drivers/video/fbdev/sm712.h | 12 +-
drivers/video/fbdev/sm712fb.c | 242 +++++++++++++++++----
drivers/video/fbdev/udlfb.c | 114 ++++++++--
fs/ceph/super.c | 7 +
fs/cifs/smb2ops.c | 14 +-
fs/dcache.c | 24 +-
fs/fuse/file.c | 13 +-
fs/nfs/filelayout/filelayout.c | 2 +-
fs/nfs/nfs4state.c | 4 +
fs/nsfs.c | 3 +-
fs/overlayfs/copy_up.c | 6 +-
fs/overlayfs/file.c | 5 +-
fs/overlayfs/overlayfs.h | 2 +-
fs/proc/base.c | 5 +
fs/ufs/util.h | 2 +-
include/linux/bpf.h | 3 +-
include/linux/dcache.h | 2 +-
include/linux/of.h | 4 +-
include/linux/pci.h | 2 +
include/linux/skbuff.h | 9 +-
include/net/ip6_fib.h | 3 +-
include/net/xfrm.h | 20 +-
include/uapi/linux/fuse.h | 2 +
include/video/udlfb.h | 7 +
kernel/bpf/hashtab.c | 23 +-
kernel/bpf/inode.c | 2 +-
kernel/bpf/syscall.c | 5 +-
kernel/sched/cpufreq_schedutil.c | 1 +
kernel/trace/trace_events.c | 3 -
lib/Makefile | 11 +
net/core/dev.c | 2 +-
net/core/rtnetlink.c | 16 +-
net/ipv4/esp4.c | 20 +-
net/ipv4/ip_vti.c | 5 +-
net/ipv4/xfrm4_policy.c | 24 +-
net/ipv6/ip6_fib.c | 12 +-
net/ipv6/route.c | 58 +++--
net/ipv6/xfrm6_tunnel.c | 6 +-
net/key/af_key.c | 4 +-
net/mac80211/iface.c | 3 +
net/tipc/core.c | 14 +-
net/vmw_vsock/virtio_transport.c | 13 +-
net/vmw_vsock/virtio_transport_common.c | 7 +
net/xfrm/xfrm_interface.c | 17 +-
net/xfrm/xfrm_policy.c | 2 +-
net/xfrm/xfrm_state.c | 2 +-
net/xfrm/xfrm_user.c | 16 +-
security/apparmor/apparmorfs.c | 13 +-
security/inode.c | 13 +-
tools/objtool/Makefile | 3 +-
tools/perf/bench/numa.c | 4 +
.../perf/util/intel-pt-decoder/intel-pt-decoder.c | 31 ++-
tools/testing/selftests/bpf/test_verifier.c | 9 +-
virt/kvm/arm/arm.c | 11 +-
111 files changed, 1215 insertions(+), 537 deletions(-)
From: Hou Tao <[email protected]>
commit f6b50160a06d4a0d6a3999ab0c5aec4f52dba248 upstream.
__GFP_HIGHMEM is disabled if dax is enabled on brd, however
dax support for brd has been removed since commit (7a862fbbdec6
"brd: remove dax support"), so restore __GFP_HIGHMEM in
brd_insert_page().
Also remove the no longer applicable comments about DAX and highmem.
Cc: [email protected]
Fixes: 7a862fbbdec6 ("brd: remove dax support")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/brd.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -96,13 +96,8 @@ static struct page *brd_insert_page(stru
/*
* Must use NOIO because we don't want to recurse back into the
* block or filesystem layers from page reclaim.
- *
- * Cannot support DAX and highmem, because our ->direct_access
- * routine for DAX must return memory that is always addressable.
- * If DAX was reworked to use pfns and kmap throughout, this
- * restriction might be able to be lifted.
*/
- gfp_flags = GFP_NOIO | __GFP_ZERO;
+ gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
page = alloc_page(gfp_flags);
if (!page)
return NULL;
From: Owen Chen <[email protected]>
commit be17ca6ac76a5cfd07cc3a0397dd05d6929fcbbb upstream.
PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.
Fixes: e2f744a82d725 (clk: mediatek: Add MT2712 clock support)
Cc: <[email protected]>
Signed-off-by: Owen Chen <[email protected]>
Signed-off-by: Weiyi Lu <[email protected]>
Reviewed-by: James Liao <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/mediatek/clk-pll.c | 48 +++++++++++++++++++++++++++++------------
1 file changed, 34 insertions(+), 14 deletions(-)
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -88,6 +88,32 @@ static unsigned long __mtk_pll_recalc_ra
return ((unsigned long)vco + postdiv - 1) / postdiv;
}
+static void __mtk_pll_tuner_enable(struct mtk_clk_pll *pll)
+{
+ u32 r;
+
+ if (pll->tuner_en_addr) {
+ r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit);
+ writel(r, pll->tuner_en_addr);
+ } else if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+}
+
+static void __mtk_pll_tuner_disable(struct mtk_clk_pll *pll)
+{
+ u32 r;
+
+ if (pll->tuner_en_addr) {
+ r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit);
+ writel(r, pll->tuner_en_addr);
+ } else if (pll->tuner_addr) {
+ r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
+ writel(r, pll->tuner_addr);
+ }
+}
+
static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
int postdiv)
{
@@ -96,6 +122,9 @@ static void mtk_pll_set_rate_regs(struct
pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
+ /* disable tuner */
+ __mtk_pll_tuner_disable(pll);
+
/* set postdiv */
val = readl(pll->pd_addr);
val &= ~(POSTDIV_MASK << pll->data->pd_shift);
@@ -122,6 +151,9 @@ static void mtk_pll_set_rate_regs(struct
if (pll->tuner_addr)
writel(con1 + 1, pll->tuner_addr);
+ /* restore tuner_en */
+ __mtk_pll_tuner_enable(pll);
+
if (pll_en)
udelay(20);
}
@@ -228,13 +260,7 @@ static int mtk_pll_prepare(struct clk_hw
r |= pll->data->en_mask;
writel(r, pll->base_addr + REG_CON0);
- if (pll->tuner_en_addr) {
- r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit);
- writel(r, pll->tuner_en_addr);
- } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
+ __mtk_pll_tuner_enable(pll);
udelay(20);
@@ -258,13 +284,7 @@ static void mtk_pll_unprepare(struct clk
writel(r, pll->base_addr + REG_CON0);
}
- if (pll->tuner_en_addr) {
- r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit);
- writel(r, pll->tuner_en_addr);
- } else if (pll->tuner_addr) {
- r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN;
- writel(r, pll->tuner_addr);
- }
+ __mtk_pll_tuner_disable(pll);
r = readl(pll->base_addr + REG_CON0);
r &= ~CON0_BASE_EN;
From: Paul Moore <[email protected]>
commit 35a196bef449b5824033865b963ed9a43fb8c730 upstream.
Prevent userspace from changing the the /proc/PID/attr values if the
task's credentials are currently overriden. This not only makes sense
conceptually, it also prevents some really bizarre error cases caused
when trying to commit credentials to a task with overridden
credentials.
Cc: <[email protected]>
Reported-by: "chengjian (D)" <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Acked-by: John Johansen <[email protected]>
Acked-by: James Morris <[email protected]>
Acked-by: Casey Schaufler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/proc/base.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2542,6 +2542,11 @@ static ssize_t proc_pid_attr_write(struc
rcu_read_unlock();
return -EACCES;
}
+ /* Prevent changes to overridden credentials. */
+ if (current_cred() != current_real_cred()) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
rcu_read_unlock();
if (count > PAGE_SIZE)
From: Al Viro <[email protected]>
commit 5467a68cbf6884c9a9d91e2a89140afb1839c835 upstream.
For lockless accesses to dentries we don't have pinned we rely
(among other things) upon having an RCU delay between dropping
the last reference and actually freeing the memory.
On the other hand, for things like pipes and sockets we neither
do that kind of lockless access, nor want to deal with the
overhead of an RCU delay every time a socket gets closed.
So delay was made optional - setting DCACHE_RCUACCESS in ->d_flags
made sure it would happen. We tried to avoid setting it unless
we knew we need it. Unfortunately, that had led to recurring
class of bugs, in which we missed the need to set it.
We only really need it for dentries that are created by
d_alloc_pseudo(), so let's not bother with trying to be smart -
just make having an RCU delay the default. The ones that do
*not* get it set the replacement flag (DCACHE_NORCU) and we'd
better use that sparingly. d_alloc_pseudo() is the only
such user right now.
FWIW, the race that finally prompted that switch had been
between __lock_parent() of immediate subdirectory of what's
currently the root of a disconnected tree (e.g. from
open-by-handle in progress) racing with d_splice_alias()
elsewhere picking another alias for the same inode, either
on outright corrupted fs image, or (in case of open-by-handle
on NFS) that subdirectory having been just moved on server.
It's not easy to hit, so the sky is not falling, but that's
not the first race on similar missed cases and the logics
for settinf DCACHE_RCUACCESS has gotten ridiculously
convoluted.
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/filesystems/porting | 5 +++++
fs/dcache.c | 24 +++++++++++++-----------
fs/nsfs.c | 3 +--
include/linux/dcache.h | 2 +-
4 files changed, 20 insertions(+), 14 deletions(-)
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -622,3 +622,8 @@ in your dentry operations instead.
alloc_file_clone(file, flags, ops) does not affect any caller's references.
On success you get a new struct file sharing the mount/dentry with the
original, on failure - ERR_PTR().
+--
+[mandatory]
+ DCACHE_RCUACCESS is gone; having an RCU delay on dentry freeing is the
+ default. DCACHE_NORCU opts out, and only d_alloc_pseudo() has any
+ business doing so.
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -344,7 +344,7 @@ static void dentry_free(struct dentry *d
}
}
/* if dentry was never visible to RCU, immediate free is OK */
- if (!(dentry->d_flags & DCACHE_RCUACCESS))
+ if (dentry->d_flags & DCACHE_NORCU)
__d_free(&dentry->d_u.d_rcu);
else
call_rcu(&dentry->d_u.d_rcu, __d_free);
@@ -1694,7 +1694,6 @@ struct dentry *d_alloc(struct dentry * p
struct dentry *dentry = __d_alloc(parent->d_sb, name);
if (!dentry)
return NULL;
- dentry->d_flags |= DCACHE_RCUACCESS;
spin_lock(&parent->d_lock);
/*
* don't need child lock because it is not subject
@@ -1719,7 +1718,7 @@ struct dentry *d_alloc_cursor(struct den
{
struct dentry *dentry = d_alloc_anon(parent->d_sb);
if (dentry) {
- dentry->d_flags |= DCACHE_RCUACCESS | DCACHE_DENTRY_CURSOR;
+ dentry->d_flags |= DCACHE_DENTRY_CURSOR;
dentry->d_parent = dget(parent);
}
return dentry;
@@ -1732,10 +1731,17 @@ struct dentry *d_alloc_cursor(struct den
*
* For a filesystem that just pins its dentries in memory and never
* performs lookups at all, return an unhashed IS_ROOT dentry.
+ * This is used for pipes, sockets et.al. - the stuff that should
+ * never be anyone's children or parents. Unlike all other
+ * dentries, these will not have RCU delay between dropping the
+ * last reference and freeing them.
*/
struct dentry *d_alloc_pseudo(struct super_block *sb, const struct qstr *name)
{
- return __d_alloc(sb, name);
+ struct dentry *dentry = __d_alloc(sb, name);
+ if (likely(dentry))
+ dentry->d_flags |= DCACHE_NORCU;
+ return dentry;
}
EXPORT_SYMBOL(d_alloc_pseudo);
@@ -1899,12 +1905,10 @@ struct dentry *d_make_root(struct inode
if (root_inode) {
res = d_alloc_anon(root_inode->i_sb);
- if (res) {
- res->d_flags |= DCACHE_RCUACCESS;
+ if (res)
d_instantiate(res, root_inode);
- } else {
+ else
iput(root_inode);
- }
}
return res;
}
@@ -2769,9 +2773,7 @@ static void __d_move(struct dentry *dent
copy_name(dentry, target);
target->d_hash.pprev = NULL;
dentry->d_parent->d_lockref.count++;
- if (dentry == old_parent)
- dentry->d_flags |= DCACHE_RCUACCESS;
- else
+ if (dentry != old_parent) /* wasn't IS_ROOT */
WARN_ON(!--old_parent->d_lockref.count);
} else {
target->d_parent = old_parent;
--- a/fs/nsfs.c
+++ b/fs/nsfs.c
@@ -85,13 +85,12 @@ slow:
inode->i_fop = &ns_file_operations;
inode->i_private = ns;
- dentry = d_alloc_pseudo(mnt->mnt_sb, &empty_name);
+ dentry = d_alloc_anon(mnt->mnt_sb);
if (!dentry) {
iput(inode);
return ERR_PTR(-ENOMEM);
}
d_instantiate(dentry, inode);
- dentry->d_flags |= DCACHE_RCUACCESS;
dentry->d_fsdata = (void *)ns->ops;
d = atomic_long_cmpxchg(&ns->stashed, 0, (unsigned long)dentry);
if (d) {
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -175,7 +175,6 @@ struct dentry_operations {
* typically using d_splice_alias. */
#define DCACHE_REFERENCED 0x00000040 /* Recently used, don't discard. */
-#define DCACHE_RCUACCESS 0x00000080 /* Entry has ever been RCU-visible */
#define DCACHE_CANT_MOUNT 0x00000100
#define DCACHE_GENOCIDE 0x00000200
@@ -216,6 +215,7 @@ struct dentry_operations {
#define DCACHE_PAR_LOOKUP 0x10000000 /* being looked up (with parent locked shared) */
#define DCACHE_DENTRY_CURSOR 0x20000000
+#define DCACHE_NORCU 0x40000000 /* No RCU delay for freeing */
extern seqlock_t rename_lock;
From: Liu Bo <[email protected]>
commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream.
fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.
This adds the necessary inode_newsize_ok() check.
Signed-off-by: Liu Bo <[email protected]>
Fixes: 05ba1f082300 ("fuse: add FALLOCATE operation")
Cc: <[email protected]> # v3.5
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -2975,6 +2975,13 @@ static long fuse_file_fallocate(struct f
}
}
+ if (!(mode & FALLOC_FL_KEEP_SIZE) &&
+ offset + length > i_size_read(inode)) {
+ err = inode_newsize_ok(inode, offset + length);
+ if (err)
+ return err;
+ }
+
if (!(mode & FALLOC_FL_KEEP_SIZE))
set_bit(FUSE_I_SIZE_UNSTABLE, &fi->state);
From: Christoph Probst <[email protected]>
commit 6a54b2e002c9d00b398d35724c79f9fe0d9b38fb upstream.
Change strcat to strncpy in the "None" case to fix a buffer overflow
when cinode->oplock is reset to 0 by another thread accessing the same
cinode. It is never valid to append "None" to any other message.
Consolidate multiple writes to cinode->oplock to reduce raciness.
Signed-off-by: Christoph Probst <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -2348,26 +2348,28 @@ smb21_set_oplock_level(struct cifsInodeI
unsigned int epoch, bool *purge_cache)
{
char message[5] = {0};
+ unsigned int new_oplock = 0;
oplock &= 0xFF;
if (oplock == SMB2_OPLOCK_LEVEL_NOCHANGE)
return;
- cinode->oplock = 0;
if (oplock & SMB2_LEASE_READ_CACHING_HE) {
- cinode->oplock |= CIFS_CACHE_READ_FLG;
+ new_oplock |= CIFS_CACHE_READ_FLG;
strcat(message, "R");
}
if (oplock & SMB2_LEASE_HANDLE_CACHING_HE) {
- cinode->oplock |= CIFS_CACHE_HANDLE_FLG;
+ new_oplock |= CIFS_CACHE_HANDLE_FLG;
strcat(message, "H");
}
if (oplock & SMB2_LEASE_WRITE_CACHING_HE) {
- cinode->oplock |= CIFS_CACHE_WRITE_FLG;
+ new_oplock |= CIFS_CACHE_WRITE_FLG;
strcat(message, "W");
}
- if (!cinode->oplock)
- strcat(message, "None");
+ if (!new_oplock)
+ strncpy(message, "None", sizeof(message));
+
+ cinode->oplock = new_oplock;
cifs_dbg(FYI, "%s Lease granted on inode %p\n", message,
&cinode->vfs_inode);
}
From: Helge Deller <[email protected]>
commit 3e1120f4b57bc12437048494ab56648edaa5b57d upstream.
Signed-off-by: Helge Deller <[email protected]>
CC: [email protected] # v4.9+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/kernel/process.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -193,6 +193,7 @@ int dump_task_fpu (struct task_struct *t
*/
int running_on_qemu __read_mostly;
+EXPORT_SYMBOL(running_on_qemu);
void __cpuidle arch_cpu_idle_dead(void)
{
From: Stefano Garzarella <[email protected]>
[ Upstream commit ac03046ece2b158ebd204dfc4896fd9f39f0e6c8 ]
When the socket is released, we should free all packets
queued in the per-socket list in order to avoid a memory
leak.
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/vmw_vsock/virtio_transport_common.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -786,12 +786,19 @@ static bool virtio_transport_close(struc
void virtio_transport_release(struct vsock_sock *vsk)
{
+ struct virtio_vsock_sock *vvs = vsk->trans;
+ struct virtio_vsock_pkt *pkt, *tmp;
struct sock *sk = &vsk->sk;
bool remove_sock = true;
lock_sock(sk);
if (sk->sk_type == SOCK_STREAM)
remove_sock = virtio_transport_close(vsk);
+
+ list_for_each_entry_safe(pkt, tmp, &vvs->rx_queue, list) {
+ list_del(&pkt->list);
+ virtio_transport_free_pkt(pkt);
+ }
release_sock(sk);
if (remove_sock)
From: Adrian Hunter <[email protected]>
commit 1b6599a9d8e6c9f7e9b0476012383b1777f7fc93 upstream.
The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.
Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v4.4+
Fixes: 3f04d98e972b ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1313,8 +1313,11 @@ static int intel_pt_walk_tnt(struct inte
return 0;
}
decoder->ip += intel_pt_insn.length;
- if (!decoder->tnt.count)
+ if (!decoder->tnt.count) {
+ decoder->sample_timestamp = decoder->timestamp;
+ decoder->sample_insn_cnt = decoder->timestamp_insn_cnt;
return -EAGAIN;
+ }
decoder->tnt.payload <<= 1;
continue;
}
From: Dmitry Osipenko <[email protected]>
commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.
Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.
In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.
Cc: stable <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/tegra-smmu.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -102,7 +102,6 @@ static inline u32 smmu_readl(struct tegr
#define SMMU_TLB_FLUSH_VA_MATCH_ALL (0 << 0)
#define SMMU_TLB_FLUSH_VA_MATCH_SECTION (2 << 0)
#define SMMU_TLB_FLUSH_VA_MATCH_GROUP (3 << 0)
-#define SMMU_TLB_FLUSH_ASID(x) (((x) & 0x7f) << 24)
#define SMMU_TLB_FLUSH_VA_SECTION(addr) ((((addr) & 0xffc00000) >> 12) | \
SMMU_TLB_FLUSH_VA_MATCH_SECTION)
#define SMMU_TLB_FLUSH_VA_GROUP(addr) ((((addr) & 0xffffc000) >> 12) | \
@@ -205,8 +204,12 @@ static inline void smmu_flush_tlb_asid(s
{
u32 value;
- value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
- SMMU_TLB_FLUSH_VA_MATCH_ALL;
+ if (smmu->soc->num_asids == 4)
+ value = (asid & 0x3) << 29;
+ else
+ value = (asid & 0x7f) << 24;
+
+ value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_MATCH_ALL;
smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
@@ -216,8 +219,12 @@ static inline void smmu_flush_tlb_sectio
{
u32 value;
- value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
- SMMU_TLB_FLUSH_VA_SECTION(iova);
+ if (smmu->soc->num_asids == 4)
+ value = (asid & 0x3) << 29;
+ else
+ value = (asid & 0x7f) << 24;
+
+ value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_SECTION(iova);
smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
@@ -227,8 +234,12 @@ static inline void smmu_flush_tlb_group(
{
u32 value;
- value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
- SMMU_TLB_FLUSH_VA_GROUP(iova);
+ if (smmu->soc->num_asids == 4)
+ value = (asid & 0x3) << 29;
+ else
+ value = (asid & 0x7f) << 24;
+
+ value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_GROUP(iova);
smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
From: Olga Kornievskaia <[email protected]>
commit b1029c9bc078a6f1515f55dd993b507dcc7e3440 upstream.
If we fail to find a good deviceid while trying to pnfs instead of
propogating an error back fallback to doing IO to the MDS. Currently,
code with fals the IO with EINVAL.
Signed-off-by: Olga Kornievskaia <[email protected]>
Fixes: 8d40b0f14846f ("NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes"
Cc: [email protected] # v4.11+
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/filelayout/filelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -904,7 +904,7 @@ fl_pnfs_update_layout(struct inode *ino,
status = filelayout_check_deviceid(lo, fl, gfp_flags);
if (status) {
pnfs_put_lseg(lseg);
- lseg = ERR_PTR(status);
+ lseg = NULL;
}
out:
return lseg;
From: "Jorge E. Moreira" <[email protected]>
[ Upstream commit ba95e5dfd36647622d8897a2a0470dde60e59ffd ]
Avoid a race in which static variables in net/vmw_vsock/af_vsock.c are
accessed (while handling interrupts) before they are initialized.
[ 4.201410] BUG: unable to handle kernel paging request at ffffffffffffffe8
[ 4.207829] IP: vsock_addr_equals_addr+0x3/0x20
[ 4.211379] PGD 28210067 P4D 28210067 PUD 28212067 PMD 0
[ 4.211379] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4.211379] Modules linked in:
[ 4.211379] CPU: 1 PID: 30 Comm: kworker/1:1 Not tainted 4.14.106-419297-gd7e28cc1f241 #1
[ 4.211379] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 4.211379] Workqueue: virtio_vsock virtio_transport_rx_work
[ 4.211379] task: ffffa3273d175280 task.stack: ffffaea1800e8000
[ 4.211379] RIP: 0010:vsock_addr_equals_addr+0x3/0x20
[ 4.211379] RSP: 0000:ffffaea1800ebd28 EFLAGS: 00010286
[ 4.211379] RAX: 0000000000000002 RBX: 0000000000000000 RCX: ffffffffb94e42f0
[ 4.211379] RDX: 0000000000000400 RSI: ffffffffffffffe0 RDI: ffffaea1800ebdd0
[ 4.211379] RBP: ffffaea1800ebd58 R08: 0000000000000001 R09: 0000000000000001
[ 4.211379] R10: 0000000000000000 R11: ffffffffb89d5d60 R12: ffffaea1800ebdd0
[ 4.211379] R13: 00000000828cbfbf R14: 0000000000000000 R15: ffffaea1800ebdc0
[ 4.211379] FS: 0000000000000000(0000) GS:ffffa3273fd00000(0000) knlGS:0000000000000000
[ 4.211379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.211379] CR2: ffffffffffffffe8 CR3: 000000002820e001 CR4: 00000000001606e0
[ 4.211379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4.211379] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4.211379] Call Trace:
[ 4.211379] ? vsock_find_connected_socket+0x6c/0xe0
[ 4.211379] virtio_transport_recv_pkt+0x15f/0x740
[ 4.211379] ? detach_buf+0x1b5/0x210
[ 4.211379] virtio_transport_rx_work+0xb7/0x140
[ 4.211379] process_one_work+0x1ef/0x480
[ 4.211379] worker_thread+0x312/0x460
[ 4.211379] kthread+0x132/0x140
[ 4.211379] ? process_one_work+0x480/0x480
[ 4.211379] ? kthread_destroy_worker+0xd0/0xd0
[ 4.211379] ret_from_fork+0x35/0x40
[ 4.211379] Code: c7 47 08 00 00 00 00 66 c7 07 28 00 c7 47 08 ff ff ff ff c7 47 04 ff ff ff ff c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 8b 47 08 <3b> 46 08 75 0a 8b 47 04 3b 46 04 0f 94 c0 c3 31 c0 c3 90 66 2e
[ 4.211379] RIP: vsock_addr_equals_addr+0x3/0x20 RSP: ffffaea1800ebd28
[ 4.211379] CR2: ffffffffffffffe8
[ 4.211379] ---[ end trace f31cc4a2e6df3689 ]---
[ 4.211379] Kernel panic - not syncing: Fatal exception in interrupt
[ 4.211379] Kernel Offset: 0x37000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 4.211379] Rebooting in 5 seconds..
Fixes: 22b5c0b63f32 ("vsock/virtio: fix kernel panic after device hot-unplug")
Cc: Stefan Hajnoczi <[email protected]>
Cc: Stefano Garzarella <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] [4.9+]
Signed-off-by: Jorge E. Moreira <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Acked-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -702,28 +702,27 @@ static int __init virtio_vsock_init(void
if (!virtio_vsock_workqueue)
return -ENOMEM;
- ret = register_virtio_driver(&virtio_vsock_driver);
+ ret = vsock_core_init(&virtio_transport.transport);
if (ret)
goto out_wq;
- ret = vsock_core_init(&virtio_transport.transport);
+ ret = register_virtio_driver(&virtio_vsock_driver);
if (ret)
- goto out_vdr;
+ goto out_vci;
return 0;
-out_vdr:
- unregister_virtio_driver(&virtio_vsock_driver);
+out_vci:
+ vsock_core_exit();
out_wq:
destroy_workqueue(virtio_vsock_workqueue);
return ret;
-
}
static void __exit virtio_vsock_exit(void)
{
- vsock_core_exit();
unregister_virtio_driver(&virtio_vsock_driver);
+ vsock_core_exit();
destroy_workqueue(virtio_vsock_workqueue);
}
From: Yifeng Li <[email protected]>
commit 8069053880e0ee3a75fd6d7e0a30293265fe3de4 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause a white screen of death on
the next POST, presumably the proper timings for the LCD panel was
not reprogrammed properly by the BIOS.
Experiments showed a few CRTC Scratch Registers, including CRT3D,
CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
a hardware testing register, we shouldn't mess with it. CRT3C has
blanking signal and line compare control, which is not needed for this
driver.
Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
registers don't have side-effect on other systems, writing to them is
also highly questionable.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1173,8 +1173,12 @@ static void sm7xx_set_timing(struct smtc
smtc_crtcw(i, vgamode[j].init_cr00_cr18[i]);
/* init CRTC register CR30 - CR4D */
- for (i = 0; i < SIZE_CR30_CR4D; i++)
+ for (i = 0; i < SIZE_CR30_CR4D; i++) {
+ if ((i + 0x30) >= 0x3B && (i + 0x30) <= 0x3F)
+ /* side-effect, don't write to CR3B-CR3F */
+ continue;
smtc_crtcw(i + 0x30, vgamode[j].init_cr30_cr4d[i]);
+ }
/* init CRTC register CR90 - CRA7 */
for (i = 0; i < SIZE_CR90_CRA7; i++)
From: Yifeng Li <[email protected]>
commit 9e0e59993df0601cddb95c4f6c61aa3d5e753c00 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X
will crash the machine instantly, because the VRAM/framebuffer is not
mapped correctly.
On SM712, the framebuffer starts at the beginning of address space, but
SM720's framebuffer starts at the 1 MiB offset from the beginning. However,
sm712fb fails to take this into account, as a result, writing to the
framebuffer will destroy all the registers and kill the system immediately.
Another problem is the driver assumes 8 MiB of VRAM for SM720, but some
SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM.
Fix this problem by removing the hardcoded VRAM size, adding a function to
query the amount of VRAM from register MCR76 on SM720, and adding proper
framebuffer offset.
Please note that the memory map may have additional problems on Big-Endian
system, which is not available for testing by myself. But I highly suspect
that the original code is also broken on Big-Endian machines for SM720, so
at least we are not making the problem worse. More, the driver also assumed
SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used
in earlier laptops, such as IBM Thinkpad 240X, the driver would probably
crash on them. I've never seen one of those machines and cannot fix it, but
I have documented these problems in the comments.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712.h | 5 ----
drivers/video/fbdev/sm712fb.c | 48 ++++++++++++++++++++++++++++++++++++++----
2 files changed, 44 insertions(+), 9 deletions(-)
--- a/drivers/video/fbdev/sm712.h
+++ b/drivers/video/fbdev/sm712.h
@@ -19,11 +19,6 @@
#define SCREEN_Y_RES 600
#define SCREEN_BPP 16
-/*Assume SM712 graphics chip has 4MB VRAM */
-#define SM712_VIDEOMEMORYSIZE 0x00400000
-/*Assume SM722 graphics chip has 8MB VRAM */
-#define SM722_VIDEOMEMORYSIZE 0x00800000
-
#define dac_reg (0x3c8)
#define dac_val (0x3c9)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1329,6 +1329,11 @@ static int smtc_map_smem(struct smtcfb_i
{
sfb->fb->fix.smem_start = pci_resource_start(pdev, 0);
+ if (sfb->chip_id == 0x720)
+ /* on SM720, the framebuffer starts at the 1 MB offset */
+ sfb->fb->fix.smem_start += 0x00200000;
+
+ /* XXX: is it safe for SM720 on Big-Endian? */
if (sfb->fb->var.bits_per_pixel == 32)
sfb->fb->fix.smem_start += big_addr;
@@ -1366,12 +1371,45 @@ static inline void sm7xx_init_hw(void)
outb_p(0x11, 0x3c5);
}
+static u_long sm7xx_vram_probe(struct smtcfb_info *sfb)
+{
+ u8 vram;
+
+ switch (sfb->chip_id) {
+ case 0x710:
+ case 0x712:
+ /*
+ * Assume SM712 graphics chip has 4MB VRAM.
+ *
+ * FIXME: SM712 can have 2MB VRAM, which is used on earlier
+ * laptops, such as IBM Thinkpad 240X. This driver would
+ * probably crash on those machines. If anyone gets one of
+ * those and is willing to help, run "git blame" and send me
+ * an E-mail.
+ */
+ return 0x00400000;
+ case 0x720:
+ outb_p(0x76, 0x3c4);
+ vram = inb_p(0x3c5) >> 6;
+
+ if (vram == 0x00)
+ return 0x00800000; /* 8 MB */
+ else if (vram == 0x01)
+ return 0x01000000; /* 16 MB */
+ else if (vram == 0x02)
+ return 0x00400000; /* illegal, fallback to 4 MB */
+ else if (vram == 0x03)
+ return 0x00400000; /* 4 MB */
+ }
+ return 0; /* unknown hardware */
+}
+
static int smtcfb_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct smtcfb_info *sfb;
struct fb_info *info;
- u_long smem_size = 0x00800000; /* default 8MB */
+ u_long smem_size;
int err;
unsigned long mmio_base;
@@ -1428,12 +1466,15 @@ static int smtcfb_pci_probe(struct pci_d
mmio_base = pci_resource_start(pdev, 0);
pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chip_rev_id);
+ smem_size = sm7xx_vram_probe(sfb);
+ dev_info(&pdev->dev, "%lu MiB of VRAM detected.\n",
+ smem_size / 1048576);
+
switch (sfb->chip_id) {
case 0x710:
case 0x712:
sfb->fb->fix.mmio_start = mmio_base + 0x00400000;
sfb->fb->fix.mmio_len = 0x00400000;
- smem_size = SM712_VIDEOMEMORYSIZE;
sfb->lfb = ioremap(mmio_base, mmio_addr);
if (!sfb->lfb) {
dev_err(&pdev->dev,
@@ -1465,8 +1506,7 @@ static int smtcfb_pci_probe(struct pci_d
case 0x720:
sfb->fb->fix.mmio_start = mmio_base;
sfb->fb->fix.mmio_len = 0x00200000;
- smem_size = SM722_VIDEOMEMORYSIZE;
- sfb->dp_regs = ioremap(mmio_base, 0x00a00000);
+ sfb->dp_regs = ioremap(mmio_base, 0x00200000 + smem_size);
sfb->lfb = sfb->dp_regs + 0x00200000;
sfb->mmio = (smtc_regbaseaddress =
sfb->dp_regs + 0x000c0000);
From: Peter Zijlstra <[email protected]>
commit 4b33dadf37666c0860b88f9e52a16d07bf6d0b03 upstream.
In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.
These helper functions are added:
int3_emulate_jmp(): changes the location of the regs->ip to return there.
(The next two are only for x86_64)
int3_emulate_push(): to push the address onto the gap in the stack
int3_emulate_call(): push the return address and change regs->ip
Cc: Andy Lutomirski <[email protected]>
Cc: Nicolai Stange <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Miroslav Benes <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Joe Lawrence <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nayna Jain <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <[email protected]>
Cc: [email protected]
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <[email protected]>
Reviewed-by: Nicolai Stange <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/text-patching.h | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -39,4 +39,32 @@ extern int poke_int3_handler(struct pt_r
extern void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler);
extern int after_bootmem;
+static inline void int3_emulate_jmp(struct pt_regs *regs, unsigned long ip)
+{
+ regs->ip = ip;
+}
+
+#define INT3_INSN_SIZE 1
+#define CALL_INSN_SIZE 5
+
+#ifdef CONFIG_X86_64
+static inline void int3_emulate_push(struct pt_regs *regs, unsigned long val)
+{
+ /*
+ * The int3 handler in entry_64.S adds a gap between the
+ * stack where the break point happened, and the saving of
+ * pt_regs. We can extend the original stack because of
+ * this gap. See the idtentry macro's create_gap option.
+ */
+ regs->sp -= sizeof(unsigned long);
+ *(unsigned long *)regs->sp = val;
+}
+
+static inline void int3_emulate_call(struct pt_regs *regs, unsigned long func)
+{
+ int3_emulate_push(regs, regs->ip - INT3_INSN_SIZE + CALL_INSN_SIZE);
+ int3_emulate_jmp(regs, func);
+}
+#endif
+
#endif /* _ASM_X86_TEXT_PATCHING_H */
From: Pan Bian <[email protected]>
commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream.
The function p54p_probe takes an extra reference count of the PCI
device. However, the extra reference count is not dropped when it fails
to enable the PCI device. This patch fixes the bug.
Cc: [email protected]
Signed-off-by: Pan Bian <[email protected]>
Acked-by: Christian Lamparter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intersil/p54/p54pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/intersil/p54/p54pci.c
+++ b/drivers/net/wireless/intersil/p54/p54pci.c
@@ -554,7 +554,7 @@ static int p54p_probe(struct pci_dev *pd
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Cannot enable new PCI device\n");
- return err;
+ goto err_put;
}
mem_addr = pci_resource_start(pdev, 0);
@@ -639,6 +639,7 @@ static int p54p_probe(struct pci_dev *pd
pci_release_regions(pdev);
err_disable_dev:
pci_disable_device(pdev);
+err_put:
pci_dev_put(pdev);
return err;
}
From: Dmitry Osipenko <[email protected]>
commit b906c056b6023c390f18347169071193fda57dde upstream.
Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.
Cc: stable <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/memory/tegra/mc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -280,7 +280,7 @@ static int tegra_mc_setup_latency_allowa
u32 value;
/* compute the number of MC clock cycles per tick */
- tick = mc->tick * clk_get_rate(mc->clk);
+ tick = (unsigned long long)mc->tick * clk_get_rate(mc->clk);
do_div(tick, NSEC_PER_SEC);
value = readl(mc->regs + MC_EMEM_ARB_CFG);
From: Mikulas Patocka <[email protected]>
commit babc250e278eac7b0e671bdaedf833759b43bb78 upstream.
Rendering calls may be done simultaneously from the workqueue,
dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io.
The code is robust enough so that it won't crash on concurrent rendering.
However, concurrent rendering may cause display corruption if the same
pixel is simultaneously being rendered. In order to avoid this corruption,
this patch adds a mutex around the rendering calls.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: Bernie Thompson <[email protected]>
Cc: Ladislav Michl <[email protected]>
Cc: <[email protected]>
[b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/udlfb.c | 41 ++++++++++++++++++++++++++++++-----------
include/video/udlfb.h | 1 +
2 files changed, 31 insertions(+), 11 deletions(-)
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -596,7 +596,7 @@ static int dlfb_render_hline(struct dlfb
static int dlfb_handle_damage(struct dlfb_data *dlfb, int x, int y, int width, int height)
{
- int i;
+ int i, ret;
char *cmd;
cycles_t start_cycles, end_cycles;
int bytes_sent = 0;
@@ -606,21 +606,29 @@ static int dlfb_handle_damage(struct dlf
start_cycles = get_cycles();
+ mutex_lock(&dlfb->render_mutex);
+
aligned_x = DL_ALIGN_DOWN(x, sizeof(unsigned long));
width = DL_ALIGN_UP(width + (x-aligned_x), sizeof(unsigned long));
x = aligned_x;
if ((width <= 0) ||
(x + width > dlfb->info->var.xres) ||
- (y + height > dlfb->info->var.yres))
- return -EINVAL;
+ (y + height > dlfb->info->var.yres)) {
+ ret = -EINVAL;
+ goto unlock_ret;
+ }
- if (!atomic_read(&dlfb->usb_active))
- return 0;
+ if (!atomic_read(&dlfb->usb_active)) {
+ ret = 0;
+ goto unlock_ret;
+ }
urb = dlfb_get_urb(dlfb);
- if (!urb)
- return 0;
+ if (!urb) {
+ ret = 0;
+ goto unlock_ret;
+ }
cmd = urb->transfer_buffer;
for (i = y; i < y + height ; i++) {
@@ -654,7 +662,11 @@ error:
>> 10)), /* Kcycles */
&dlfb->cpu_kcycles_used);
- return 0;
+ ret = 0;
+
+unlock_ret:
+ mutex_unlock(&dlfb->render_mutex);
+ return ret;
}
static void dlfb_init_damage(struct dlfb_data *dlfb)
@@ -782,17 +794,19 @@ static void dlfb_dpy_deferred_io(struct
int bytes_identical = 0;
int bytes_rendered = 0;
+ mutex_lock(&dlfb->render_mutex);
+
if (!fb_defio)
- return;
+ goto unlock_ret;
if (!atomic_read(&dlfb->usb_active))
- return;
+ goto unlock_ret;
start_cycles = get_cycles();
urb = dlfb_get_urb(dlfb);
if (!urb)
- return;
+ goto unlock_ret;
cmd = urb->transfer_buffer;
@@ -825,6 +839,8 @@ error:
atomic_add(((unsigned int) ((end_cycles - start_cycles)
>> 10)), /* Kcycles */
&dlfb->cpu_kcycles_used);
+unlock_ret:
+ mutex_unlock(&dlfb->render_mutex);
}
static int dlfb_get_edid(struct dlfb_data *dlfb, char *edid, int len)
@@ -986,6 +1002,8 @@ static void dlfb_ops_destroy(struct fb_i
cancel_work_sync(&dlfb->damage_work);
+ mutex_destroy(&dlfb->render_mutex);
+
if (info->cmap.len != 0)
fb_dealloc_cmap(&info->cmap);
if (info->monspecs.modedb)
@@ -1682,6 +1700,7 @@ static int dlfb_usb_probe(struct usb_int
dlfb->ops = dlfb_ops;
info->fbops = &dlfb->ops;
+ mutex_init(&dlfb->render_mutex);
dlfb_init_damage(dlfb);
spin_lock_init(&dlfb->damage_lock);
INIT_WORK(&dlfb->damage_work, dlfb_damage_work);
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -48,6 +48,7 @@ struct dlfb_data {
int base8;
u32 pseudo_palette[256];
int blank_mode; /*one of FB_BLANK_ */
+ struct mutex render_mutex;
int damage_x;
int damage_y;
int damage_x2;
From: Adrian Hunter <[email protected]>
commit 7ba8fa20e26eb3c0c04d747f7fd2223694eac4d5 upstream.
The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.
Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.
Example:
Before:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
...
After:
$ perf script --itrace=i10us
ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
...
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Fixes: f4aa081949e7b ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -888,16 +888,20 @@ static uint64_t intel_pt_next_period(str
timestamp = decoder->timestamp + decoder->timestamp_insn_cnt;
masked_timestamp = timestamp & decoder->period_mask;
if (decoder->continuous_period) {
- if (masked_timestamp != decoder->last_masked_timestamp)
+ if (masked_timestamp > decoder->last_masked_timestamp)
return 1;
} else {
timestamp += 1;
masked_timestamp = timestamp & decoder->period_mask;
- if (masked_timestamp != decoder->last_masked_timestamp) {
+ if (masked_timestamp > decoder->last_masked_timestamp) {
decoder->last_masked_timestamp = masked_timestamp;
decoder->continuous_period = true;
}
}
+
+ if (masked_timestamp < decoder->last_masked_timestamp)
+ return decoder->period_ticks;
+
return decoder->period_ticks - (timestamp - masked_timestamp);
}
@@ -926,7 +930,10 @@ static void intel_pt_sample_insn(struct
case INTEL_PT_PERIOD_TICKS:
timestamp = decoder->timestamp + decoder->timestamp_insn_cnt;
masked_timestamp = timestamp & decoder->period_mask;
- decoder->last_masked_timestamp = masked_timestamp;
+ if (masked_timestamp > decoder->last_masked_timestamp)
+ decoder->last_masked_timestamp = masked_timestamp;
+ else
+ decoder->last_masked_timestamp += decoder->period_ticks;
break;
case INTEL_PT_PERIOD_NONE:
case INTEL_PT_PERIOD_MTC:
From: Nikos Tsironis <[email protected]>
commit e28adc3bf34e434b30e8d063df4823ba0f3e0529 upstream.
Add missing dm_bitset_cursor_next() to properly advance the bitset
cursor.
Otherwise, the discarded state of all blocks is set according to the
discarded state of the first block.
Fixes: ae4a46a1f6 ("dm cache metadata: use bitset cursor api to load discard bitset")
Cc: [email protected]
Signed-off-by: Nikos Tsironis <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-cache-metadata.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -1167,11 +1167,18 @@ static int __load_discards(struct dm_cac
if (r)
return r;
- for (b = 0; b < from_dblock(cmd->discard_nr_blocks); b++) {
+ for (b = 0; ; b++) {
r = fn(context, cmd->discard_block_size, to_dblock(b),
dm_bitset_cursor_get_value(&c));
if (r)
break;
+
+ if (b >= (from_dblock(cmd->discard_nr_blocks) - 1))
+ break;
+
+ r = dm_bitset_cursor_next(&c);
+ if (r)
+ break;
}
dm_bitset_cursor_end(&c);
From: Janusz Krzysztofik <[email protected]>
commit 933c1320847f5ed6b61a7d10f0a948aa98ccd7b0 upstream.
After removal of clock_start() from before soc_camera_init_i2c() in
soc_camera_probe() by commit 9aea470b399d ("[media] soc-camera: switch
I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650
driver could no longer probe the sensor successfully because its clock
was no longer turned on in advance. The issue was initially worked
around by adding that missing clock_start() equivalent to OMAP1 camera
interface driver - the only user of this sensor - but a propoer fix
should be rather implemented in the sensor driver code itself.
Fix the issue by inserting a delay between the clock is turned on and
the sensor I2C registers are read for the first time.
Tested on Amstrad Delta with now out of tree but still locally
maintained omap1_camera host driver.
Fixes: 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Cc: [email protected]
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/ov6650.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -815,6 +815,8 @@ static int ov6650_video_probe(struct i2c
if (ret < 0)
return ret;
+ msleep(20);
+
/*
* check and show product ID and manufacturer ID
*/
From: ZhangXiaoxu <[email protected]>
commit f02f3755dbd14fb935d24b14650fff9ba92243b8 upstream.
stat command with soft mount never return after server is stopped.
When alloc a new client, the state of the client will be set to
NFS4CLNT_LEASE_EXPIRED.
When the server is stopped, the state manager will work, and accord
the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it
will drain the slot table and lead other task to wait queue, until
the client recovered. Then the stat command is hung.
When discover server trunking, the client will renew the lease,
but check the client state, it lead the client state corruption.
So, we need to call state manager to recover it when detect server
ip trunking.
Signed-off-by: ZhangXiaoxu <[email protected]>
Cc: [email protected]
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4state.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -159,6 +159,10 @@ int nfs40_discover_server_trunking(struc
/* Sustain the lease, even if it's empty. If the clientid4
* goes stale it's of no use for trunking discovery. */
nfs4_schedule_state_renewal(*result);
+
+ /* If the client state need to recover, do it. */
+ if (clp->cl_state)
+ nfs4_schedule_state_manager(clp);
}
out:
return status;
From: Miklos Szeredi <[email protected]>
commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream.
Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.
Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: Antonio SJ Musumeci <[email protected]>
Fixes: 6eaf4782eb09 ("fuse: writepages: crop secondary requests")
Cc: <[email protected]> # v3.13
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1526,7 +1526,7 @@ __acquires(fc->lock)
{
struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_inode *fi = get_fuse_inode(inode);
- size_t crop = i_size_read(inode);
+ loff_t crop = i_size_read(inode);
struct fuse_req *req;
while (fi->writectr >= 0 && !list_empty(&fi->queued_writes)) {
From: Martin Wilck <[email protected]>
commit 940bc471780b004a5277c1931f52af363c2fc9da upstream.
Commit b592211c33f7 ("dm mpath: fix attached_handler_name leak and
dangling hw_handler_name pointer") fixed a memory leak for the case
where setup_scsi_dh() returns failure. But setup_scsi_dh may return
success and not "use" attached_handler_name if the
retain_attached_hwhandler flag is not set on the map. As setup_scsi_sh
properly "steals" the pointer by nullifying it, freeing it
unconditionally in parse_path() is safe.
Fixes: b592211c33f7 ("dm mpath: fix attached_handler_name leak and dangling hw_handler_name pointer")
Cc: [email protected]
Reported-by: Yufen Yu <[email protected]>
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-mpath.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -892,6 +892,7 @@ static struct pgpath *parse_path(struct
if (attached_handler_name || m->hw_handler_name) {
INIT_DELAYED_WORK(&p->activate_path, activate_path_work);
r = setup_scsi_dh(p->path.dev->bdev, m, &attached_handler_name, &ti->error);
+ kfree(attached_handler_name);
if (r) {
dm_put_device(ti, p->path.dev);
goto bad;
@@ -906,7 +907,6 @@ static struct pgpath *parse_path(struct
return p;
bad:
- kfree(attached_handler_name);
free_pgpath(p);
return ERR_PTR(r);
}
From: Kirill Smelkov <[email protected]>
commit bbd84f33652f852ce5992d65db4d020aba21f882 upstream.
Starting from commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client. See commit 10dce8af3422 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2d02a ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.
To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.
This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.
Cc: [email protected] # v3.14+
Signed-off-by: Kirill Smelkov <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 4 +++-
include/uapi/linux/fuse.h | 2 ++
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -179,7 +179,9 @@ void fuse_finish_open(struct inode *inod
file->f_op = &fuse_direct_io_file_operations;
if (!(ff->open_flags & FOPEN_KEEP_CACHE))
invalidate_inode_pages2(inode->i_mapping);
- if (ff->open_flags & FOPEN_NONSEEKABLE)
+ if (ff->open_flags & FOPEN_STREAM)
+ stream_open(inode, file);
+ else if (ff->open_flags & FOPEN_NONSEEKABLE)
nonseekable_open(inode, file);
if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
struct fuse_inode *fi = get_fuse_inode(inode);
--- a/include/uapi/linux/fuse.h
+++ b/include/uapi/linux/fuse.h
@@ -219,10 +219,12 @@ struct fuse_file_lock {
* FOPEN_DIRECT_IO: bypass page cache for this open file
* FOPEN_KEEP_CACHE: don't invalidate the data cache on open
* FOPEN_NONSEEKABLE: the file is not seekable
+ * FOPEN_STREAM: the file is stream-like (no file position at all)
*/
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
#define FOPEN_NONSEEKABLE (1 << 2)
+#define FOPEN_STREAM (1 << 4)
/**
* INIT request/reply flags
From: Yifeng Li <[email protected]>
commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.
Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.
Stop writing to the SR30 (a.k.a FPR30) register.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1145,8 +1145,8 @@ static void sm7xx_set_timing(struct smtc
/* init SEQ register SR30 - SR75 */
for (i = 0; i < SIZE_SR30_SR75; i++)
- if ((i + 0x30) != 0x62 && (i + 0x30) != 0x6a &&
- (i + 0x30) != 0x6b)
+ if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 &&
+ (i + 0x30) != 0x6a && (i + 0x30) != 0x6b)
smtc_seqw(i + 0x30,
vgamode[j].init_sr30_sr75[i]);
From: Nathan Chancellor <[email protected]>
commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.
Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.
$ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
...
AR /out/tools/objtool/libsubcmd.a
/bin/sh: 1: ar: not found
...
Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Cc: <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/objtool/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -7,11 +7,12 @@ ARCH := x86
endif
# always use the host compiler
+HOSTAR ?= ar
HOSTCC ?= gcc
HOSTLD ?= ld
+AR = $(HOSTAR)
CC = $(HOSTCC)
LD = $(HOSTLD)
-AR = ar
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
From: Josh Poimboeuf <[email protected]>
commit 2700fefdb2d9751c416ad56897e27d41e409324a upstream.
To allow an int3 handler to emulate a call instruction, it must be able to
push a return address onto the stack. Add a gap to the stack to allow the
int3 handler to push the return address and change the return from int3 to
jump straight to the emulated called function target.
Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble
Link: http://lkml.kernel.org/r/[email protected]
[
Note, this is needed to allow Live Kernel Patching to not miss calling a
patched function when tracing is enabled. -- Steven Rostedt
]
Cc: [email protected]
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <[email protected]>
Reviewed-by: Nicolai Stange <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -905,7 +905,7 @@ apicinterrupt IRQ_WORK_VECTOR irq_work
*/
#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
-.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
+.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 create_gap=0
ENTRY(\sym)
UNWIND_HINT_IRET_REGS offset=\has_error_code*8
@@ -925,6 +925,20 @@ ENTRY(\sym)
jnz .Lfrom_usermode_switch_stack_\@
.endif
+ .if \create_gap == 1
+ /*
+ * If coming from kernel space, create a 6-word gap to allow the
+ * int3 handler to emulate a call instruction.
+ */
+ testb $3, CS-ORIG_RAX(%rsp)
+ jnz .Lfrom_usermode_no_gap_\@
+ .rept 6
+ pushq 5*8(%rsp)
+ .endr
+ UNWIND_HINT_IRET_REGS offset=8
+.Lfrom_usermode_no_gap_\@:
+ .endif
+
.if \paranoid
call paranoid_entry
.else
@@ -1154,7 +1168,7 @@ apicinterrupt3 HYPERV_STIMER0_VECTOR \
#endif /* CONFIG_HYPERV */
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3 do_int3 has_error_code=0
+idtentry int3 do_int3 has_error_code=0 create_gap=1
idtentry stack_segment do_stack_segment has_error_code=1
#ifdef CONFIG_XEN
From: James Prestwood <[email protected]>
commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream.
When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot. Add a quirk to
avoid bus resets on this device.
Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: James Prestwood <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: [email protected] # v3.14+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3383,6 +3383,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
/*
* Root port on some Cavium CN8xxx chips do not successfully complete a bus
[ Upstream commit b805d78d300bcf2c83d6df7da0c818b0fee41427 ]
UBSAN report this:
UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24
index 6 is out of range for type 'unsigned int [6]'
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4
0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80
ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8
Call Trace:
<IRQ> [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline]
<IRQ> [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
[<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164
[<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382
[<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289
[<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309
[<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243
[<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144
[<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline]
[<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401
[<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273
[<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline]
[<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
[<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
[<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
[<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735
<EOI> [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52
[<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline]
[<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446
[<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437
[<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92
[<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline]
[<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline]
[<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299
[<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245
The issue is triggered as this:
xfrm_add_policy
-->verify_newpolicy_info //check the index provided by user with XFRM_POLICY_MAX
//In my case, the index is 0x6E6BB6, so it pass the check.
-->xfrm_policy_construct //copy the user's policy and set xfrm_policy_timer
-->xfrm_policy_insert
--> __xfrm_policy_link //use the orgin dir, in my case is 2
--> xfrm_gen_index //generate policy index, there is 0x6E6BB6
then xfrm_policy_timer be fired
xfrm_policy_timer
--> xfrm_policy_id2dir //get dir from (policy index & 7), in my case is 6
--> xfrm_policy_delete
--> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access
Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is
valid, to fix the issue.
Reported-by: Hulk Robot <[email protected]>
Fixes: e682adf021be ("xfrm: Try to honor policy index if it's supplied by user")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 7e4904b930041..060afc4ffd958 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1424,7 +1424,7 @@ static int verify_newpolicy_info(struct xfrm_userpolicy_info *p)
ret = verify_policy_dir(p->dir);
if (ret)
return ret;
- if (p->index && ((p->index & XFRM_POLICY_MAX) != p->dir))
+ if (p->index && (xfrm_policy_id2dir(p->index) != p->dir))
return -EINVAL;
return 0;
--
2.20.1
From: Jisheng Zhang <[email protected]>
commit 31f996efbd5a7825f4d30150469e9d110aea00e8 upstream.
Commit 60ed982a4e78 ("PCI/AER: Move internal declarations to
drivers/pci/pci.h") changed pci_aer_init() to return "void", but didn't
change the stub for when CONFIG_PCIEAER isn't enabled. Change the stub to
match.
Fixes: 60ed982a4e78 ("PCI/AER: Move internal declarations to drivers/pci/pci.h")
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: [email protected] # v4.19+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -530,7 +530,7 @@ void pci_aer_clear_fatal_status(struct p
void pci_aer_clear_device_status(struct pci_dev *dev);
#else
static inline void pci_no_aer(void) { }
-static inline int pci_aer_init(struct pci_dev *d) { return -ENODEV; }
+static inline void pci_aer_init(struct pci_dev *d) { }
static inline void pci_aer_exit(struct pci_dev *d) { }
static inline void pci_aer_clear_fatal_status(struct pci_dev *dev) { }
static inline void pci_aer_clear_device_status(struct pci_dev *dev) { }
From: Peter Zijlstra <[email protected]>
commit 9e298e8604088a600d8100a111a532a9d342af09 upstream.
Nicolai Stange discovered[1] that if live kernel patching is enabled, and the
function tracer started tracing the same function that was patched, the
conversion of the fentry call site during the translation of going from
calling the live kernel patch trampoline to the iterator trampoline, would
have as slight window where it didn't call anything.
As live kernel patching depends on ftrace to always call its code (to
prevent the function being traced from being called, as it will redirect
it). This small window would allow the old buggy function to be called, and
this can cause undesirable results.
Nicolai submitted new patches[2] but these were controversial. As this is
similar to the static call emulation issues that came up a while ago[3].
But after some debate[4][5] adding a gap in the stack when entering the
breakpoint handler allows for pushing the return address onto the stack to
easily emulate a call.
[1] http://lkml.kernel.org/r/[email protected]
[2] http://lkml.kernel.org/r/[email protected]
[3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com
[4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com
[5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com
[
Live kernel patching is not implemented on x86_32, thus the emulate
calls are only for x86_64.
]
Cc: Andy Lutomirski <[email protected]>
Cc: Nicolai Stange <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: the arch/x86 maintainers <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Miroslav Benes <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Joe Lawrence <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nayna Jain <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <[email protected]>
Cc: [email protected]
Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <[email protected]>
Reviewed-by: Nicolai Stange <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
[ Changed to only implement emulated calls for x86_64 ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/ftrace.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -29,6 +29,7 @@
#include <asm/kprobes.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
+#include <asm/text-patching.h>
#ifdef CONFIG_DYNAMIC_FTRACE
@@ -228,6 +229,7 @@ int ftrace_modify_call(struct dyn_ftrace
}
static unsigned long ftrace_update_func;
+static unsigned long ftrace_update_func_call;
static int update_ftrace_func(unsigned long ip, void *new)
{
@@ -256,6 +258,8 @@ int ftrace_update_ftrace_func(ftrace_fun
unsigned char *new;
int ret;
+ ftrace_update_func_call = (unsigned long)func;
+
new = ftrace_call_replace(ip, (unsigned long)func);
ret = update_ftrace_func(ip, new);
@@ -291,13 +295,28 @@ int ftrace_int3_handler(struct pt_regs *
if (WARN_ON_ONCE(!regs))
return 0;
- ip = regs->ip - 1;
- if (!ftrace_location(ip) && !is_ftrace_caller(ip))
- return 0;
+ ip = regs->ip - INT3_INSN_SIZE;
- regs->ip += MCOUNT_INSN_SIZE - 1;
+#ifdef CONFIG_X86_64
+ if (ftrace_location(ip)) {
+ int3_emulate_call(regs, (unsigned long)ftrace_regs_caller);
+ return 1;
+ } else if (is_ftrace_caller(ip)) {
+ if (!ftrace_update_func_call) {
+ int3_emulate_jmp(regs, ip + CALL_INSN_SIZE);
+ return 1;
+ }
+ int3_emulate_call(regs, ftrace_update_func_call);
+ return 1;
+ }
+#else
+ if (ftrace_location(ip) || is_ftrace_caller(ip)) {
+ int3_emulate_jmp(regs, ip + CALL_INSN_SIZE);
+ return 1;
+ }
+#endif
- return 1;
+ return 0;
}
static int ftrace_write(unsigned long ip, const char *val, int size)
@@ -868,6 +887,8 @@ void arch_ftrace_update_trampoline(struc
func = ftrace_ops_get_func(ops);
+ ftrace_update_func_call = (unsigned long)func;
+
/* Do a safe modify in case the trampoline is executing */
new = ftrace_call_replace(ip, (unsigned long)func);
ret = update_ftrace_func(ip, new);
@@ -964,6 +985,7 @@ static int ftrace_mod_jmp(unsigned long
{
unsigned char *new;
+ ftrace_update_func_call = 0UL;
new = ftrace_jmp_replace(ip, (unsigned long)func);
return update_ftrace_func(ip, new);
From: Adrian Hunter <[email protected]>
commit 61b6e08dc8e3ea80b7485c9b3f875ddd45c8466b upstream.
The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.
The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.
In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.
That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.
To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.
Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected] # v4.4+
Fixes: 3f04d98e972b5 ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -58,6 +58,7 @@ enum intel_pt_pkt_state {
INTEL_PT_STATE_NO_IP,
INTEL_PT_STATE_ERR_RESYNC,
INTEL_PT_STATE_IN_SYNC,
+ INTEL_PT_STATE_TNT_CONT,
INTEL_PT_STATE_TNT,
INTEL_PT_STATE_TIP,
INTEL_PT_STATE_TIP_PGD,
@@ -72,8 +73,9 @@ static inline bool intel_pt_sample_time(
case INTEL_PT_STATE_NO_IP:
case INTEL_PT_STATE_ERR_RESYNC:
case INTEL_PT_STATE_IN_SYNC:
- case INTEL_PT_STATE_TNT:
+ case INTEL_PT_STATE_TNT_CONT:
return true;
+ case INTEL_PT_STATE_TNT:
case INTEL_PT_STATE_TIP:
case INTEL_PT_STATE_TIP_PGD:
case INTEL_PT_STATE_FUP:
@@ -1256,7 +1258,9 @@ static int intel_pt_walk_tnt(struct inte
return -ENOENT;
}
decoder->tnt.count -= 1;
- if (!decoder->tnt.count)
+ if (decoder->tnt.count)
+ decoder->pkt_state = INTEL_PT_STATE_TNT_CONT;
+ else
decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
decoder->tnt.payload <<= 1;
decoder->state.from_ip = decoder->ip;
@@ -1287,7 +1291,9 @@ static int intel_pt_walk_tnt(struct inte
if (intel_pt_insn.branch == INTEL_PT_BR_CONDITIONAL) {
decoder->tnt.count -= 1;
- if (!decoder->tnt.count)
+ if (decoder->tnt.count)
+ decoder->pkt_state = INTEL_PT_STATE_TNT_CONT;
+ else
decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
if (decoder->tnt.payload & BIT63) {
decoder->tnt.payload <<= 1;
@@ -2356,6 +2362,7 @@ const struct intel_pt_state *intel_pt_de
err = intel_pt_walk_trace(decoder);
break;
case INTEL_PT_STATE_TNT:
+ case INTEL_PT_STATE_TNT_CONT:
err = intel_pt_walk_tnt(decoder);
if (err == -EAGAIN)
err = intel_pt_walk_trace(decoder);
From: Stefan Mätje <[email protected]>
commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream.
Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.
If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed. That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.
See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.
Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected
devices set this bit.
Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.
Signed-off-by: Stefan Mätje <[email protected]>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
CC: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pcie/aspm.c | 9 +++++++++
drivers/pci/quirks.c | 17 +++++++++++++++++
include/linux/pci.h | 2 ++
3 files changed, 28 insertions(+)
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -207,6 +207,15 @@ static bool pcie_retrain_link(struct pci
pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16);
reg16 |= PCI_EXP_LNKCTL_RL;
pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+ if (parent->clear_retrain_link) {
+ /*
+ * Due to an erratum in some devices the Retrain Link bit
+ * needs to be cleared again manually to allow the link
+ * training to succeed.
+ */
+ reg16 &= ~PCI_EXP_LNKCTL_RL;
+ pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+ }
/* Wait for link training end. Break out after waiting for timeout */
start_jiffies = jiffies;
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2220,6 +2220,23 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+/*
+ * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
+ * Link bit cleared after starting the link retrain process to allow this
+ * process to finish.
+ *
+ * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130. See also the
+ * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf.
+ */
+static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
+{
+ dev->clear_retrain_link = 1;
+ pci_info(dev, "Enable PCIe Retrain Link quirk\n");
+}
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe110, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe111, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe130, quirk_enable_clear_retrain_link);
+
static void fixup_rev1_53c810(struct pci_dev *dev)
{
u32 class = dev->class;
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -346,6 +346,8 @@ struct pci_dev {
unsigned int hotplug_user_indicators:1; /* SlotCtl indicators
controlled exclusively by
user sysfs */
+ unsigned int clear_retrain_link:1; /* Need to clear Retrain Link
+ bit manually */
unsigned int d3_delay; /* D3->D0 transition time in ms */
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
From: Elazar Leibovich <[email protected]>
commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.
When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.
Reading a single byte, and then the next byte would result EOF.
While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399
This code was mentioned as problematic in
commit cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")
An example C code that show this bug is:
#include <stdio.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2)
return 1;
int fd = open(argv[1], O_RDONLY);
char c;
read(fd, &c, 1);
printf("First %c\n", c);
read(fd, &c, 1);
printf("Second %c\n", c);
}
Then run with, e.g.
sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id
You'll notice you're getting the first character twice, instead of the
first two characters in the id file.
Link: http://lkml.kernel.org/r/[email protected]
Cc: Orit Wasserman <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
Fixes: 23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events.c | 3 ---
1 file changed, 3 deletions(-)
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -1318,9 +1318,6 @@ event_id_read(struct file *filp, char __
char buf[32];
int len;
- if (*ppos)
- return 0;
-
if (unlikely(!id))
return -ENODEV;
[ Upstream commit 0edd6b64d1939e9e9168ff27947995bb7751db5d ]
Unless the very next line is schedule(), or implies it, one must not use
preempt_enable_no_resched(). It can cause a preemption to go missing and
thereby cause arbitrary delays, breaking the PREEMPT=y invariant.
Cc: Roman Gushchin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 523481a3471b5..fd95f2efe5f32 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -400,7 +400,7 @@ int bpf_prog_array_copy(struct bpf_prog_array __rcu *old_array,
} \
_out: \
rcu_read_unlock(); \
- preempt_enable_no_resched(); \
+ preempt_enable(); \
_ret; \
})
--
2.20.1
[ Upstream commit 025c65e119bf58b610549ca359c9ecc5dee6a8d2 ]
If an xfrmi is associated to a vrf layer 3 master device,
xfrm_policy_check() fails after traffic decapsulation. The input
interface is replaced by the layer 3 master device, and hence
xfrmi_decode_session() can't match the xfrmi anymore to satisfy
policy checking.
Extend ingress xfrmi lookup to honor the original layer 3 slave
device, allowing xfrm interfaces to operate within a vrf domain.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Martin Willi <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/xfrm.h | 3 ++-
net/xfrm/xfrm_interface.c | 17 ++++++++++++++---
net/xfrm/xfrm_policy.c | 2 +-
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 3e966c632f3b2..4ddd2b13ac8d6 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -295,7 +295,8 @@ struct xfrm_replay {
};
struct xfrm_if_cb {
- struct xfrm_if *(*decode_session)(struct sk_buff *skb);
+ struct xfrm_if *(*decode_session)(struct sk_buff *skb,
+ unsigned short family);
};
void xfrm_if_register_cb(const struct xfrm_if_cb *ifcb);
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 82723ef44db3e..555ee2aca6c01 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -70,17 +70,28 @@ static struct xfrm_if *xfrmi_lookup(struct net *net, struct xfrm_state *x)
return NULL;
}
-static struct xfrm_if *xfrmi_decode_session(struct sk_buff *skb)
+static struct xfrm_if *xfrmi_decode_session(struct sk_buff *skb,
+ unsigned short family)
{
struct xfrmi_net *xfrmn;
- int ifindex;
struct xfrm_if *xi;
+ int ifindex = 0;
if (!secpath_exists(skb) || !skb->dev)
return NULL;
+ switch (family) {
+ case AF_INET6:
+ ifindex = inet6_sdif(skb);
+ break;
+ case AF_INET:
+ ifindex = inet_sdif(skb);
+ break;
+ }
+ if (!ifindex)
+ ifindex = skb->dev->ifindex;
+
xfrmn = net_generic(xs_net(xfrm_input_state(skb)), xfrmi_net_id);
- ifindex = skb->dev->ifindex;
for_each_xfrmi_rcu(xfrmn->xfrmi[0], xi) {
if (ifindex == xi->dev->ifindex &&
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index bf5d59270f79d..ce1b262ce9646 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2339,7 +2339,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
ifcb = xfrm_if_get_cb();
if (ifcb) {
- xi = ifcb->decode_session(skb);
+ xi = ifcb->decode_session(skb, family);
if (xi) {
if_id = xi->p.if_id;
net = xi->net;
--
2.20.1
From: Mikulas Patocka <[email protected]>
commit 81bc6d150ace6250503b825d9d0c10f7bbd24095 upstream.
When the target line contains an invalid device, delay_ctr() will call
delay_dtr() with NULL workqueue. Attempting to destroy the NULL
workqueue causes a crash.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-delay.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -121,7 +121,8 @@ static void delay_dtr(struct dm_target *
{
struct delay_c *dc = ti->private;
- destroy_workqueue(dc->kdelayd_wq);
+ if (dc->kdelayd_wq)
+ destroy_workqueue(dc->kdelayd_wq);
if (dc->read.dev)
dm_put_device(ti, dc->read.dev);
[ Upstream commit f51dcd0f621caac5380ce90fbbeafc32ce4517ae ]
symlink body shouldn't be freed without an RCU delay. Switch apparmorfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/apparmor/apparmorfs.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/security/apparmor/apparmorfs.c b/security/apparmor/apparmorfs.c
index e09fe4d7307cd..40e3a098f6fb5 100644
--- a/security/apparmor/apparmorfs.c
+++ b/security/apparmor/apparmorfs.c
@@ -123,17 +123,22 @@ static int aafs_show_path(struct seq_file *seq, struct dentry *dentry)
return 0;
}
-static void aafs_evict_inode(struct inode *inode)
+static void aafs_i_callback(struct rcu_head *head)
{
- truncate_inode_pages_final(&inode->i_data);
- clear_inode(inode);
+ struct inode *inode = container_of(head, struct inode, i_rcu);
if (S_ISLNK(inode->i_mode))
kfree(inode->i_link);
+ free_inode_nonrcu(inode);
+}
+
+static void aafs_destroy_inode(struct inode *inode)
+{
+ call_rcu(&inode->i_rcu, aafs_i_callback);
}
static const struct super_operations aafs_super_ops = {
.statfs = simple_statfs,
- .evict_inode = aafs_evict_inode,
+ .destroy_inode = aafs_destroy_inode,
.show_path = aafs_show_path,
};
--
2.20.1
From: Mikulas Patocka <[email protected]>
commit 30bba430ddf737978e40561198693ba91386dac1 upstream.
When we use separate devices for data and metadata, dm-integrity would
incorrectly calculate the size of the metadata device as if it had
512-byte block size - and it would refuse activation with larger block
size and smaller metadata device.
Fix this so that it takes actual block size into account, which fixes
the following reported issue:
https://gitlab.com/cryptsetup/cryptsetup/issues/450
Fixes: 356d9d52e122 ("dm integrity: allow separate metadata device")
Cc: [email protected] # v4.19+
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-integrity.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -2557,7 +2557,7 @@ static int calculate_device_limits(struc
if (last_sector < ic->start || last_sector >= ic->meta_device_sectors)
return -EINVAL;
} else {
- __u64 meta_size = ic->provided_data_sectors * ic->tag_size;
+ __u64 meta_size = (ic->provided_data_sectors >> ic->sb->log2_sectors_per_block) * ic->tag_size;
meta_size = (meta_size + ((1U << (ic->log2_buffer_sectors + SECTOR_SHIFT)) - 1))
>> (ic->log2_buffer_sectors + SECTOR_SHIFT);
meta_size <<= ic->log2_buffer_sectors;
@@ -3428,7 +3428,7 @@ try_smaller_buffer:
DEBUG_print(" journal_sections %u\n", (unsigned)le32_to_cpu(ic->sb->journal_sections));
DEBUG_print(" journal_entries %u\n", ic->journal_entries);
DEBUG_print(" log2_interleave_sectors %d\n", ic->sb->log2_interleave_sectors);
- DEBUG_print(" device_sectors 0x%llx\n", (unsigned long long)ic->device_sectors);
+ DEBUG_print(" data_device_sectors 0x%llx\n", (unsigned long long)ic->data_device_sectors);
DEBUG_print(" initial_sectors 0x%x\n", ic->initial_sectors);
DEBUG_print(" metadata_run 0x%x\n", ic->metadata_run);
DEBUG_print(" log2_metadata_run %d\n", ic->log2_metadata_run);
From: Song Liu <[email protected]>
commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.
This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.
Cc: Dan Williams <[email protected]>
Cc: Nigel Croxon <[email protected]>
Cc: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4221,15 +4221,26 @@ static void handle_parity_checks6(struct
case check_state_check_result:
sh->check_state = check_state_idle;
- if (s->failed > 1)
- break;
/* handle a successful check operation, if parity is correct
* we are done. Otherwise update the mismatch count and repair
* parity if !MD_RECOVERY_CHECK
*/
if (sh->ops.zero_sum_result == 0) {
- /* Any parity checked was correct */
- set_bit(STRIPE_INSYNC, &sh->state);
+ /* both parities are correct */
+ if (!s->failed)
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ /* in contrast to the raid5 case we can validate
+ * parity, but still have a failure to write
+ * back
+ */
+ sh->check_state = check_state_compute_result;
+ /* Returning at this point means that we may go
+ * off and bring p and/or q uptodate again so
+ * we make sure to check zero_sum_result again
+ * to verify if p or q need writeback
+ */
+ }
} else {
atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
From: Nigel Croxon <[email protected]>
commit b2176a1dfb518d870ee073445d27055fea64dfb8 upstream.
The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.
Note: fixed warning reported by kbuild test robot <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Nigel Croxon <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/raid5.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4185,7 +4185,7 @@ static void handle_parity_checks6(struct
/* now write out any block on a failed drive,
* or P or Q if they were recomputed
*/
- BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */
+ dev = NULL;
if (s->failed == 2) {
dev = &sh->dev[s->failed_num[1]];
s->locked++;
@@ -4210,6 +4210,14 @@ static void handle_parity_checks6(struct
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantwrite, &dev->flags);
}
+ if (WARN_ONCE(dev && !test_bit(R5_UPTODATE, &dev->flags),
+ "%s: disk%td not up to date\n",
+ mdname(conf->mddev),
+ dev - (struct r5dev *) &sh->dev)) {
+ clear_bit(R5_LOCKED, &dev->flags);
+ clear_bit(R5_Wantwrite, &dev->flags);
+ s->locked--;
+ }
clear_bit(STRIPE_DEGRADED, &sh->state);
set_bit(STRIPE_INSYNC, &sh->state);
From: Daniel Borkmann <[email protected]>
commit 50b045a8c0ccf44f76640ac3eea8d80ca53979a3 upstream.
One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".
In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.
[0] http://vger.kernel.org/bpfconf.html
Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/hashtab.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -518,18 +518,30 @@ static u32 htab_map_gen_lookup(struct bp
return insn - insn_buf;
}
-static void *htab_lru_map_lookup_elem(struct bpf_map *map, void *key)
+static __always_inline void *__htab_lru_map_lookup_elem(struct bpf_map *map,
+ void *key, const bool mark)
{
struct htab_elem *l = __htab_map_lookup_elem(map, key);
if (l) {
- bpf_lru_node_set_ref(&l->lru_node);
+ if (mark)
+ bpf_lru_node_set_ref(&l->lru_node);
return l->key + round_up(map->key_size, 8);
}
return NULL;
}
+static void *htab_lru_map_lookup_elem(struct bpf_map *map, void *key)
+{
+ return __htab_lru_map_lookup_elem(map, key, true);
+}
+
+static void *htab_lru_map_lookup_elem_sys(struct bpf_map *map, void *key)
+{
+ return __htab_lru_map_lookup_elem(map, key, false);
+}
+
static u32 htab_lru_map_gen_lookup(struct bpf_map *map,
struct bpf_insn *insn_buf)
{
@@ -1206,6 +1218,7 @@ const struct bpf_map_ops htab_lru_map_op
.map_free = htab_map_free,
.map_get_next_key = htab_map_get_next_key,
.map_lookup_elem = htab_lru_map_lookup_elem,
+ .map_lookup_elem_sys_only = htab_lru_map_lookup_elem_sys,
.map_update_elem = htab_lru_map_update_elem,
.map_delete_elem = htab_lru_map_delete_elem,
.map_gen_lookup = htab_lru_map_gen_lookup,
@@ -1237,7 +1250,6 @@ static void *htab_lru_percpu_map_lookup_
int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value)
{
- struct bpf_htab *htab = container_of(map, struct bpf_htab, map);
struct htab_elem *l;
void __percpu *pptr;
int ret = -ENOENT;
@@ -1253,8 +1265,9 @@ int bpf_percpu_hash_copy(struct bpf_map
l = __htab_map_lookup_elem(map, key);
if (!l)
goto out;
- if (htab_is_lru(htab))
- bpf_lru_node_set_ref(&l->lru_node);
+ /* We do not mark LRU map element here in order to not mess up
+ * eviction heuristics when user space does a map walk.
+ */
pptr = htab_elem_get_ptr(l, map->key_size);
for_each_possible_cpu(cpu) {
bpf_long_memcpy(value + off,
From: Kazufumi Ikeda <[email protected]>
commit be20bbcb0a8cb5597cc62b3e28d275919f3431df upstream.
Reestablish the PCIe link very early in the resume process in case it
went down to prevent PCI accesses from hanging the bus. Such accesses
can happen early in the PCI resume process, as early as the
SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the
driver resume_noirq() callback.
Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Kazufumi Ikeda <[email protected]>
Signed-off-by: Gaku Inami <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
[[email protected]: reformatted commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Cc: [email protected]
Cc: Geert Uytterhoeven <[email protected]>
Cc: Phil Edworthy <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: Wolfram Sang <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pcie-rcar.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -46,6 +46,7 @@
/* Transfer control */
#define PCIETCTLR 0x02000
+#define DL_DOWN BIT(3)
#define CFINIT 1
#define PCIETSTR 0x02004
#define DATA_LINK_ACTIVE 1
@@ -94,6 +95,7 @@
#define MACCTLR 0x011058
#define SPEED_CHANGE BIT(24)
#define SCRAMBLE_DISABLE BIT(27)
+#define PMSR 0x01105c
#define MACS2R 0x011078
#define MACCGSPSETR 0x011084
#define SPCNGRSN BIT(31)
@@ -1130,6 +1132,7 @@ static int rcar_pcie_probe(struct platfo
pcie = pci_host_bridge_priv(bridge);
pcie->dev = dev;
+ platform_set_drvdata(pdev, pcie);
err = pci_parse_request_of_pci_ranges(dev, &pcie->resources, NULL);
if (err)
@@ -1221,10 +1224,28 @@ err_free_bridge:
return err;
}
+static int rcar_pcie_resume_noirq(struct device *dev)
+{
+ struct rcar_pcie *pcie = dev_get_drvdata(dev);
+
+ if (rcar_pci_read_reg(pcie, PMSR) &&
+ !(rcar_pci_read_reg(pcie, PCIETCTLR) & DL_DOWN))
+ return 0;
+
+ /* Re-establish the PCIe link */
+ rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR);
+ return rcar_pcie_wait_for_dl(pcie);
+}
+
+static const struct dev_pm_ops rcar_pcie_pm_ops = {
+ .resume_noirq = rcar_pcie_resume_noirq,
+};
+
static struct platform_driver rcar_pcie_driver = {
.driver = {
.name = "rcar-pcie",
.of_match_table = rcar_pcie_of_match,
+ .pm = &rcar_pcie_pm_ops,
.suppress_bind_attrs = true,
},
.probe = rcar_pcie_probe,
From: Chenbo Feng <[email protected]>
commit e547ff3f803e779a3898f1f48447b29f43c54085 upstream.
For iptable module to load a bpf program from a pinned location, it
only retrieve a loaded program and cannot change the program content so
requiring a write permission for it might not be necessary.
Also when adding or removing an unrelated iptable rule, it might need to
flush and reload the xt_bpf related rules as well and triggers the inode
permission check. It might be better to remove the write premission
check for the inode so we won't need to grant write access to all the
processes that flush and restore iptables rules.
Signed-off-by: Chenbo Feng <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/bpf/inode.c
+++ b/kernel/bpf/inode.c
@@ -518,7 +518,7 @@ out:
static struct bpf_prog *__get_prog_inode(struct inode *inode, enum bpf_prog_type type)
{
struct bpf_prog *prog;
- int ret = inode_permission(inode, MAY_READ | MAY_WRITE);
+ int ret = inode_permission(inode, MAY_READ);
if (ret)
return ERR_PTR(ret);
[ Upstream commit 4e9036042fedaffcd868d7f7aa948756c48c637d ]
To choose whether to pick the GID from the old (16bit) or new (32bit)
field, we should check if the old gid field is set to 0xffff. Mainline
checks the old *UID* field instead - cut'n'paste from the corresponding
code in ufs_get_inode_uid().
Fixes: 252e211e90ce
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ufs/util.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ufs/util.h b/fs/ufs/util.h
index 1fd3011ea6236..7fd4802222b8c 100644
--- a/fs/ufs/util.h
+++ b/fs/ufs/util.h
@@ -229,7 +229,7 @@ ufs_get_inode_gid(struct super_block *sb, struct ufs_inode *inode)
case UFS_UID_44BSD:
return fs32_to_cpu(sb, inode->ui_u3.ui_44.ui_gid);
case UFS_UID_EFT:
- if (inode->ui_u1.oldids.ui_suid == 0xFFFF)
+ if (inode->ui_u1.oldids.ui_sgid == 0xFFFF)
return fs32_to_cpu(sb, inode->ui_u3.ui_sun.ui_gid);
/* Fall through */
default:
--
2.20.1
[ Upstream commit 8dfb4eba4100e7cdd161a8baef2d8d61b7a7e62e ]
esp_output_udp_encap can produce a length that doesn't fit in the 16
bits of a UDP header's length field. In that case, we'll send a
fragmented packet whose length is larger than IP_MAX_MTU (resulting in
"Oversized IP packet" warnings on receive) and with a bogus UDP
length.
To prevent this, add a length check to esp_output_udp_encap and return
-EMSGSIZE on failure.
This seems to be older than git history.
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/esp4.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 12a43a5369a54..114f9def1ec54 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -223,7 +223,7 @@ static void esp_output_fill_trailer(u8 *tail, int tfclen, int plen, __u8 proto)
tail[plen - 1] = proto;
}
-static void esp_output_udp_encap(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *esp)
+static int esp_output_udp_encap(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *esp)
{
int encap_type;
struct udphdr *uh;
@@ -231,6 +231,7 @@ static void esp_output_udp_encap(struct xfrm_state *x, struct sk_buff *skb, stru
__be16 sport, dport;
struct xfrm_encap_tmpl *encap = x->encap;
struct ip_esp_hdr *esph = esp->esph;
+ unsigned int len;
spin_lock_bh(&x->lock);
sport = encap->encap_sport;
@@ -238,11 +239,14 @@ static void esp_output_udp_encap(struct xfrm_state *x, struct sk_buff *skb, stru
encap_type = encap->encap_type;
spin_unlock_bh(&x->lock);
+ len = skb->len + esp->tailen - skb_transport_offset(skb);
+ if (len + sizeof(struct iphdr) >= IP_MAX_MTU)
+ return -EMSGSIZE;
+
uh = (struct udphdr *)esph;
uh->source = sport;
uh->dest = dport;
- uh->len = htons(skb->len + esp->tailen
- - skb_transport_offset(skb));
+ uh->len = htons(len);
uh->check = 0;
switch (encap_type) {
@@ -259,6 +263,8 @@ static void esp_output_udp_encap(struct xfrm_state *x, struct sk_buff *skb, stru
*skb_mac_header(skb) = IPPROTO_UDP;
esp->esph = esph;
+
+ return 0;
}
int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *esp)
@@ -272,8 +278,12 @@ int esp_output_head(struct xfrm_state *x, struct sk_buff *skb, struct esp_info *
int tailen = esp->tailen;
/* this is non-NULL only with UDP Encapsulation */
- if (x->encap)
- esp_output_udp_encap(x, skb, esp);
+ if (x->encap) {
+ int err = esp_output_udp_encap(x, skb, esp);
+
+ if (err < 0)
+ return err;
+ }
if (!skb_cloned(skb)) {
if (tailen <= skb_tailroom(skb)) {
--
2.20.1
[ Upstream commit f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ]
The txq of vif is added to active_txqs list for ATF TXQ scheduling
in the function ieee80211_queue_skb(), but it was not properly removed
before freeing the txq object. It was causing use after free of the txq
objects from the active_txqs list, result was kernel panic
due to invalid memory access.
Fix kernel invalid memory access by properly removing txq object
from active_txqs list before free the object.
Signed-off-by: Bhagavathi Perumal S <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/iface.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 3a0171a65db32..152d4365f9616 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1910,6 +1910,9 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
list_del_rcu(&sdata->list);
mutex_unlock(&sdata->local->iflist_mtx);
+ if (sdata->vif.txq)
+ ieee80211_txq_purge(sdata->local, to_txq_info(sdata->vif.txq));
+
synchronize_rcu();
if (sdata->dev) {
--
2.20.1
[ Upstream commit 811328fc3222f7b55846de0cd0404339e2e1e6d7 ]
A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <[email protected]>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
virt/kvm/arm/arm.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 1415e36fed3db..fef3527af3bd7 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -949,7 +949,7 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
const struct kvm_vcpu_init *init)
{
- unsigned int i;
+ unsigned int i, ret;
int phys_target = kvm_target_cpu();
if (init->target != phys_target)
@@ -984,9 +984,14 @@ static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
vcpu->arch.target = phys_target;
/* Now we know what it is, we can reset it. */
- return kvm_reset_vcpu(vcpu);
-}
+ ret = kvm_reset_vcpu(vcpu);
+ if (ret) {
+ vcpu->arch.target = -1;
+ bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
+ }
+ return ret;
+}
static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
struct kvm_vcpu_init *init)
--
2.20.1
[ Upstream commit 9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ]
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Signed-off-by: Tobin C. Harding <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tobin C. Harding <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Viresh Kumar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/cpufreq_schedutil.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 217f81ecae176..4e3625109b28d 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -751,6 +751,7 @@ out:
return 0;
fail:
+ kobject_put(&tunables->attr_set.kobj);
policy->governor_data = NULL;
sugov_tunables_free(tunables);
--
2.20.1
[ Upstream commit d5bc73f34cc97c4b4b9202cc93182c2515076edf ]
In most cases, kmalloc() will not be available early in boot when
pci_setup() is called. Thus, the kstrdup() call that was added to fix the
__initdata bug with the disable_acs_redir parameter usually returns NULL,
so the parameter is discarded and has no effect.
To fix this, store the string that's in initdata until an initcall function
can allocate the memory appropriately. This way we don't need any
additional static memory.
Fixes: d2fd6e81912a ("PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter")
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 30649addc6252..61f2ef28ea1c7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6135,8 +6135,7 @@ static int __init pci_setup(char *str)
} else if (!strncmp(str, "pcie_scan_all", 13)) {
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
} else if (!strncmp(str, "disable_acs_redir=", 18)) {
- disable_acs_redir_param =
- kstrdup(str + 18, GFP_KERNEL);
+ disable_acs_redir_param = str + 18;
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
@@ -6147,3 +6146,19 @@ static int __init pci_setup(char *str)
return 0;
}
early_param("pci", pci_setup);
+
+/*
+ * 'disable_acs_redir_param' is initialized in pci_setup(), above, to point
+ * to data in the __initdata section which will be freed after the init
+ * sequence is complete. We can't allocate memory in pci_setup() because some
+ * architectures do not have any memory allocation service available during
+ * an early_param() call. So we allocate memory and copy the variable here
+ * before the init section is freed.
+ */
+static int __init pci_realloc_setup_params(void)
+{
+ disable_acs_redir_param = kstrdup(disable_acs_redir_param, GFP_KERNEL);
+
+ return 0;
+}
+pure_initcall(pci_realloc_setup_params);
--
2.20.1
[ Upstream commit dbe7208c6c4aec083571f2ec742870a0d0edbea3 ]
If called fast enough so samples do not increment, we can get
division by zero in kernel:
__div0
cpcap_battery_cc_raw_div
cpcap_battery_get_property
power_supply_get_property.part.1
power_supply_get_property
power_supply_show_property
power_supply_uevent
Fixes: 874b2adbed12 ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Tony Lindgren <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/cpcap-battery.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
index 98ba07869c3b0..3bae02380bb22 100644
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -221,6 +221,9 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
int avg_current;
u32 cc_lsb;
+ if (!divider)
+ return 0;
+
sample &= 0xffffff; /* 24-bits, unsigned */
offset &= 0x7ff; /* 10-bits, signed */
--
2.20.1
From: John Garry <[email protected]>
commit 0b777eee88d712256ba8232a9429edb17c4f9ceb upstream.
In commit 376991db4b64 ("driver core: Postpone DMA tear-down until after
devres release"), we changed the ordering of tearing down the device DMA
ops and releasing all the device's resources; this was because the DMA ops
should be maintained until we release the device's managed DMA memories.
However, we have seen another crash on an arm64 system when a
device driver probe fails:
hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2
scsi host1: hisi_sas_v3_hw
BUG: Bad page state in process swapper/0 pfn:313f5
page:ffff7e0000c4fd40 count:1 mapcount:0
mapping:0000000000000000 index:0x0
flags: 0xfffe00000001000(reserved)
raw: 0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48
0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in:
CPU: 49 PID: 1 Comm: swapper/0 Not tainted
5.1.0-rc1-43081-g22d97fd-dirty #1433
Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - V1.12.01 01/29/2019
Call trace:
dump_backtrace+0x0/0x118
show_stack+0x14/0x1c
dump_stack+0xa4/0xc8
bad_page+0xe4/0x13c
free_pages_check_bad+0x4c/0xc0
__free_pages_ok+0x30c/0x340
__free_pages+0x30/0x44
__dma_direct_free_pages+0x30/0x38
dma_direct_free+0x24/0x38
dma_free_attrs+0x9c/0xd8
dmam_release+0x20/0x28
release_nodes+0x17c/0x220
devres_release_all+0x34/0x54
really_probe+0xc4/0x2c8
driver_probe_device+0x58/0xfc
device_driver_attach+0x68/0x70
__driver_attach+0x94/0xdc
bus_for_each_dev+0x5c/0xb4
driver_attach+0x20/0x28
bus_add_driver+0x14c/0x200
driver_register+0x6c/0x124
__pci_register_driver+0x48/0x50
sas_v3_pci_driver_init+0x20/0x28
do_one_initcall+0x40/0x25c
kernel_init_freeable+0x2b8/0x3c0
kernel_init+0x10/0x100
ret_from_fork+0x10/0x18
Disabling lock debugging due to kernel taint
BUG: Bad page state in process swapper/0 pfn:313f6
page:ffff7e0000c4fd80 count:1 mapcount:0
mapping:0000000000000000 index:0x0
[ 89.322983] flags: 0xfffe00000001000(reserved)
raw: 0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88
0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
The crash occurs for the same reason.
In this case, on the really_probe() failure path, we are still clearing
the DMA ops prior to releasing the device's managed memories.
This patch fixes this issue by reordering the DMA ops teardown and the
call to devres_release_all() on the failure path.
Reported-by: Xiang Chen <[email protected]>
Tested-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
[jpg: backport to 4.19.x and earlier]
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/dd.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -482,7 +482,7 @@ re_probe:
ret = dma_configure(dev);
if (ret)
- goto dma_failed;
+ goto probe_failed;
if (driver_sysfs_add(dev)) {
printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
@@ -537,14 +537,13 @@ re_probe:
goto done;
probe_failed:
- dma_deconfigure(dev);
-dma_failed:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
pinctrl_bind_failed:
device_links_no_driver(dev);
devres_release_all(dev);
+ dma_deconfigure(dev);
driver_sysfs_remove(dev);
dev->driver = NULL;
dev_set_drvdata(dev, NULL);
[ Upstream commit dbb2483b2a46fbaf833cfb5deb5ed9cace9c7399 ]
In commit 6a53b7593233 ("xfrm: check id proto in validate_tmpl()")
I introduced a check for xfrm protocol, but according to Herbert
IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so
it should be removed from validate_tmpl().
And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific
protocols, this is why xfrm_state_flush() could still miss
IPPROTO_ROUTING, which leads that those entries are left in
net->xfrm.state_all before exit net. Fix this by replacing
IPSEC_PROTO_ANY with zero.
This patch also extracts the check from validate_tmpl() to
xfrm_id_proto_valid() and uses it in parse_ipsecrequest().
With this, no other protocols should be added into xfrm.
Fixes: 6a53b7593233 ("xfrm: check id proto in validate_tmpl()")
Reported-by: [email protected]
Cc: Steffen Klassert <[email protected]>
Cc: Herbert Xu <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/xfrm.h | 17 +++++++++++++++++
net/ipv6/xfrm6_tunnel.c | 2 +-
net/key/af_key.c | 4 +++-
net/xfrm/xfrm_state.c | 2 +-
net/xfrm/xfrm_user.c | 14 +-------------
5 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 5e3daf53b3d1e..3e966c632f3b2 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1430,6 +1430,23 @@ static inline int xfrm_state_kern(const struct xfrm_state *x)
return atomic_read(&x->tunnel_users);
}
+static inline bool xfrm_id_proto_valid(u8 proto)
+{
+ switch (proto) {
+ case IPPROTO_AH:
+ case IPPROTO_ESP:
+ case IPPROTO_COMP:
+#if IS_ENABLED(CONFIG_IPV6)
+ case IPPROTO_ROUTING:
+ case IPPROTO_DSTOPTS:
+#endif
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* IPSEC_PROTO_ANY only matches 3 IPsec protocols, 0 could match all. */
static inline int xfrm_id_proto_match(u8 proto, u8 userproto)
{
return (!userproto || proto == userproto ||
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 12cb3aa990af4..d9e5f6808811a 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -345,7 +345,7 @@ static void __net_exit xfrm6_tunnel_net_exit(struct net *net)
unsigned int i;
xfrm_flush_gc();
- xfrm_state_flush(net, IPSEC_PROTO_ANY, false, true);
+ xfrm_state_flush(net, 0, false, true);
for (i = 0; i < XFRM6_TUNNEL_SPI_BYADDR_HSIZE; i++)
WARN_ON_ONCE(!hlist_empty(&xfrm6_tn->spi_byaddr[i]));
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 7d4bed9550605..0b79c9aa8eb1f 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1951,8 +1951,10 @@ parse_ipsecrequest(struct xfrm_policy *xp, struct sadb_x_ipsecrequest *rq)
if (rq->sadb_x_ipsecrequest_mode == 0)
return -EINVAL;
+ if (!xfrm_id_proto_valid(rq->sadb_x_ipsecrequest_proto))
+ return -EINVAL;
- t->id.proto = rq->sadb_x_ipsecrequest_proto; /* XXX check proto */
+ t->id.proto = rq->sadb_x_ipsecrequest_proto;
if ((mode = pfkey_mode_to_xfrm(rq->sadb_x_ipsecrequest_mode)) < 0)
return -EINVAL;
t->mode = mode;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 3f729cd512aff..11e09eb138d60 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -2386,7 +2386,7 @@ void xfrm_state_fini(struct net *net)
flush_work(&net->xfrm.state_hash_work);
flush_work(&xfrm_state_gc_work);
- xfrm_state_flush(net, IPSEC_PROTO_ANY, false, true);
+ xfrm_state_flush(net, 0, false, true);
WARN_ON(!list_empty(&net->xfrm.state_all));
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 060afc4ffd958..2122f89f61555 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1513,20 +1513,8 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
return -EINVAL;
}
- switch (ut[i].id.proto) {
- case IPPROTO_AH:
- case IPPROTO_ESP:
- case IPPROTO_COMP:
-#if IS_ENABLED(CONFIG_IPV6)
- case IPPROTO_ROUTING:
- case IPPROTO_DSTOPTS:
-#endif
- case IPSEC_PROTO_ANY:
- break;
- default:
+ if (!xfrm_id_proto_valid(ut[i].id.proto))
return -EINVAL;
- }
-
}
return 0;
--
2.20.1
From: Alexander Shishkin <[email protected]>
commit 51e0f227812ed81a368de54157ebe14396b4be03 upstream.
Commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace
Module devices") naively calculates the channel bitmap size in 64-bit
chunks regardless of the size of underlying unsigned long, making the
bitmap half as big on a 32-bit system. This leads to an out of bounds
access with the upper half of the bitmap.
Fix this by using BITS_TO_LONGS. While at it, convert to using
struct_size() for the total size calculation of the master struct.
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
Reported-by: Mulu He <[email protected]>
Cc: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/stm/core.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -166,11 +166,10 @@ stm_master(struct stm_device *stm, unsig
static int stp_master_alloc(struct stm_device *stm, unsigned int idx)
{
struct stp_master *master;
- size_t size;
- size = ALIGN(stm->data->sw_nchannels, 8) / 8;
- size += sizeof(struct stp_master);
- master = kzalloc(size, GFP_ATOMIC);
+ master = kzalloc(struct_size(master, chan_map,
+ BITS_TO_LONGS(stm->data->sw_nchannels)),
+ GFP_ATOMIC);
if (!master)
return -ENOMEM;
From: Daniel Borkmann <[email protected]>
commit c6110222c6f49ea68169f353565eb865488a8619 upstream.
Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/bpf.h | 1 +
kernel/bpf/syscall.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -34,6 +34,7 @@ struct bpf_map_ops {
void (*map_free)(struct bpf_map *map);
int (*map_get_next_key)(struct bpf_map *map, void *key, void *next_key);
void (*map_release_uref)(struct bpf_map *map);
+ void *(*map_lookup_elem_sys_only)(struct bpf_map *map, void *key);
/* funcs callable from userspace and from eBPF programs */
void *(*map_lookup_elem)(struct bpf_map *map, void *key);
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -721,7 +721,10 @@ static int map_lookup_elem(union bpf_att
err = bpf_fd_reuseport_array_lookup_elem(map, key, value);
} else {
rcu_read_lock();
- ptr = map->ops->map_lookup_elem(map, key);
+ if (map->ops->map_lookup_elem_sys_only)
+ ptr = map->ops->map_lookup_elem_sys_only(map, key);
+ else
+ ptr = map->ops->map_lookup_elem(map, key);
if (ptr)
memcpy(value, ptr, value_size);
rcu_read_unlock();
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 118d38a3577f7728278f6afda8436af05a6bec7f which is
commit 8184d44c9a577a2f1842ed6cc844bfd4a9981d8e upstream.
Tommi reports that this patch breaks the build, it's not really needed
so let's revert it.
Reported-by: Tommi Rantala <[email protected]>
Cc: Stanislav Fomichev <[email protected]>
Cc: Sasha Levin <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/bpf/test_verifier.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -32,7 +32,6 @@
#include <linux/if_ether.h>
#include <bpf/bpf.h>
-#include <bpf/libbpf.h>
#ifdef HAVE_GENHDR
# include "autoconf.h"
@@ -57,7 +56,6 @@
#define UNPRIV_SYSCTL "kernel/unprivileged_bpf_disabled"
static bool unpriv_disabled = false;
-static int skips;
struct bpf_test {
const char *descr;
@@ -12772,11 +12770,6 @@ static void do_test_single(struct bpf_te
fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
prog, prog_len, test->flags & F_LOAD_WITH_STRICT_ALIGNMENT,
"GPL", 0, bpf_vlog, sizeof(bpf_vlog), 1);
- if (fd_prog < 0 && !bpf_probe_prog_type(prog_type, 0)) {
- printf("SKIP (unsupported program type %d)\n", prog_type);
- skips++;
- goto close_fds;
- }
expected_ret = unpriv && test->result_unpriv != UNDEF ?
test->result_unpriv : test->result;
@@ -12912,7 +12905,7 @@ static void get_unpriv_disabled()
static int do_test(bool unpriv, unsigned int from, unsigned int to)
{
- int i, passes = 0, errors = 0;
+ int i, passes = 0, errors = 0, skips = 0;
for (i = from; i < to; i++) {
struct bpf_test *test = &tests[i];
[ Upstream commit bf561d3c13423fc54daa19b5d49dc15fafdb7acc ]
While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:
CC /tmp/build/perf/bench/numa.o
bench/numa.c: In function ‘worker_thread’:
bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
getrusage(RUSAGE_THREAD, &rusage);
^~~~~~~~~~~~~
SIGEV_THREAD
bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in
[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$
Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.
So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.
So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.
Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.
Cc: Arnd Bergmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: [email protected]
Cc: Namhyung Kim <[email protected]>
Cc: Vineet Gupta <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/bench/numa.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
index 44195514b19e6..fa56fde6e8d80 100644
--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -38,6 +38,10 @@
#include <numa.h>
#include <numaif.h>
+#ifndef RUSAGE_THREAD
+# define RUSAGE_THREAD 1
+#endif
+
/*
* Regular printout to the terminal, supressed if -q is specified:
*/
--
2.20.1
[ Upstream commit 6f55967ad9d9752813e36de6d5fdbd19741adfc7 ]
New race in x86_pmu_stop() was introduced by replacing the
atomic __test_and_clear_bit() of cpuc->active_mask by separate
test_bit() and __clear_bit() calls in the following commit:
3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
The race causes panic for PEBS events with enabled callchains:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:perf_prepare_sample+0x8c/0x530
Call Trace:
<NMI>
perf_event_output_forward+0x2a/0x80
__perf_event_overflow+0x51/0xe0
handle_pmi_common+0x19e/0x240
intel_pmu_handle_irq+0xad/0x170
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x69/0x110
default_do_nmi+0x3e/0x100
do_nmi+0x11a/0x180
end_repeat_nmi+0x16/0x1a
RIP: 0010:native_write_msr+0x6/0x20
...
</NMI>
intel_pmu_disable_event+0x98/0xf0
x86_pmu_stop+0x6e/0xb0
x86_pmu_del+0x46/0x140
event_sched_out.isra.97+0x7e/0x160
...
The event is configured to make samples from PEBS drain code,
but when it's disabled, we'll go through NMI path instead,
where data->callchain will not get allocated and we'll crash:
x86_pmu_stop
test_bit(hwc->idx, cpuc->active_mask)
intel_pmu_disable_event(event)
{
...
intel_pmu_pebs_disable(event);
...
EVENT OVERFLOW -> <NMI>
intel_pmu_handle_irq
handle_pmi_common
TEST PASSES -> test_bit(bit, cpuc->active_mask))
perf_event_overflow
perf_prepare_sample
{
...
if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
data->callchain = perf_callchain(event, regs);
CRASH -> size += data->callchain->nr;
}
</NMI>
...
x86_pmu_disable_event(event)
}
__clear_bit(hwc->idx, cpuc->active_mask);
Fixing this by disabling the event itself before setting
off the PEBS bit.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: David Arcari <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Lendacky Thomas <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: 3966c3feca3f ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/core.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index a759e59990fbd..09c53bcbd497d 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2074,15 +2074,19 @@ static void intel_pmu_disable_event(struct perf_event *event)
cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
cpuc->intel_cp_status &= ~(1ull << hwc->idx);
- if (unlikely(event->attr.precise_ip))
- intel_pmu_pebs_disable(event);
-
if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
intel_pmu_disable_fixed(hwc);
return;
}
x86_pmu_disable_event(event);
+
+ /*
+ * Needs to be called after x86_pmu_disable_event,
+ * so we don't trigger the event without PEBS bit set.
+ */
+ if (unlikely(event->attr.precise_ip))
+ intel_pmu_pebs_disable(event);
}
static void intel_pmu_del_event(struct perf_event *event)
--
2.20.1
[ Upstream commit da66761c2d93a46270d69001abb5692717495a68 ]
It was reported that with some special Multi Processor Group configuration,
e.g:
bcdedit.exe /set groupsize 1
bcdedit.exe /set maxgroup on
bcdedit.exe /set groupaware on
for a 16-vCPU guest WS2012 shows BSOD on boot when PV TLB flush mechanism
is in use.
Tracing kvm_hv_flush_tlb immediately reveals the issue:
kvm_hv_flush_tlb: processor_mask 0x0 address_space 0x0 flags 0x2
The only flag set in this request is HV_FLUSH_ALL_VIRTUAL_ADDRESS_SPACES,
however, processor_mask is 0x0 and no HV_FLUSH_ALL_PROCESSORS is specified.
We don't flush anything and apparently it's not what Windows expects.
TLFS doesn't say anything about such requests and newer Windows versions
seem to be unaffected. This all feels like a WS2012 bug, which is, however,
easy to workaround in KVM: let's flush everything when we see an empty
flush request, over-flushing doesn't hurt.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/hyperv.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 01d209ab5481b..229d996051653 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1291,7 +1291,16 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *current_vcpu, u64 ingpa,
flush.address_space, flush.flags);
sparse_banks[0] = flush.processor_mask;
- all_cpus = flush.flags & HV_FLUSH_ALL_PROCESSORS;
+
+ /*
+ * Work around possible WS2012 bug: it sends hypercalls
+ * with processor_mask = 0x0 and HV_FLUSH_ALL_PROCESSORS clear,
+ * while also expecting us to flush something and crashing if
+ * we don't. Let's treat processor_mask == 0 same as
+ * HV_FLUSH_ALL_PROCESSORS.
+ */
+ all_cpus = (flush.flags & HV_FLUSH_ALL_PROCESSORS) ||
+ flush.processor_mask == 0;
} else {
if (unlikely(kvm_read_guest(kvm, ingpa, &flush_ex,
sizeof(flush_ex))))
--
2.20.1
[ Upstream commit 46c874419652bbefdfed17420fd6e88d8a31d9ec ]
symlink body shouldn't be freed without an RCU delay. Switch securityfs
to ->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/inode.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/security/inode.c b/security/inode.c
index 8dd9ca8848e43..829f15672e01f 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -26,17 +26,22 @@
static struct vfsmount *mount;
static int mount_count;
-static void securityfs_evict_inode(struct inode *inode)
+static void securityfs_i_callback(struct rcu_head *head)
{
- truncate_inode_pages_final(&inode->i_data);
- clear_inode(inode);
+ struct inode *inode = container_of(head, struct inode, i_rcu);
if (S_ISLNK(inode->i_mode))
kfree(inode->i_link);
+ free_inode_nonrcu(inode);
+}
+
+static void securityfs_destroy_inode(struct inode *inode)
+{
+ call_rcu(&inode->i_rcu, securityfs_i_callback);
}
static const struct super_operations securityfs_super_operations = {
.statfs = simple_statfs,
- .evict_inode = securityfs_evict_inode,
+ .destroy_inode = securityfs_destroy_inode,
};
static int fill_super(struct super_block *sb, void *data, int silent)
--
2.20.1
[ Upstream commit 8742dc86d0c7a9628117a989c11f04a9b6b898f3 ]
We currently don't reload pointers pointing into skb header
after doing pskb_may_pull() in _decode_session4(). So in case
pskb_may_pull() changed the pointers, we read from random
memory. Fix this by putting all the needed infos on the
stack, so that we don't need to access the header pointers
after doing pskb_may_pull().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/xfrm4_policy.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index d73a6d6652f60..2b144b92ae46a 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -111,7 +111,8 @@ static void
_decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
{
const struct iphdr *iph = ip_hdr(skb);
- u8 *xprth = skb_network_header(skb) + iph->ihl * 4;
+ int ihl = iph->ihl;
+ u8 *xprth = skb_network_header(skb) + ihl * 4;
struct flowi4 *fl4 = &fl->u.ip4;
int oif = 0;
@@ -122,6 +123,11 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
fl4->flowi4_mark = skb->mark;
fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
+ fl4->flowi4_proto = iph->protocol;
+ fl4->daddr = reverse ? iph->saddr : iph->daddr;
+ fl4->saddr = reverse ? iph->daddr : iph->saddr;
+ fl4->flowi4_tos = iph->tos;
+
if (!ip_is_fragment(iph)) {
switch (iph->protocol) {
case IPPROTO_UDP:
@@ -133,7 +139,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be16 *ports;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
ports = (__be16 *)xprth;
fl4->fl4_sport = ports[!!reverse];
@@ -146,7 +152,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
pskb_may_pull(skb, xprth + 2 - skb->data)) {
u8 *icmp;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
icmp = xprth;
fl4->fl4_icmp_type = icmp[0];
@@ -159,7 +165,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be32 *ehdr;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
ehdr = (__be32 *)xprth;
fl4->fl4_ipsec_spi = ehdr[0];
@@ -171,7 +177,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
pskb_may_pull(skb, xprth + 8 - skb->data)) {
__be32 *ah_hdr;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
ah_hdr = (__be32 *)xprth;
fl4->fl4_ipsec_spi = ah_hdr[1];
@@ -183,7 +189,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be16 *ipcomp_hdr;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
ipcomp_hdr = (__be16 *)xprth;
fl4->fl4_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
@@ -196,7 +202,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
__be16 *greflags;
__be32 *gre_hdr;
- xprth = skb_network_header(skb) + iph->ihl * 4;
+ xprth = skb_network_header(skb) + ihl * 4;
greflags = (__be16 *)xprth;
gre_hdr = (__be32 *)xprth;
@@ -213,10 +219,6 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
break;
}
}
- fl4->flowi4_proto = iph->protocol;
- fl4->daddr = reverse ? iph->saddr : iph->daddr;
- fl4->saddr = reverse ? iph->daddr : iph->saddr;
- fl4->flowi4_tos = iph->tos;
}
static void xfrm4_update_pmtu(struct dst_entry *dst, struct sock *sk,
--
2.20.1
[ Upstream commit 88ef66a28391ea7b624bfb7508a5b015c13b28f3 ]
Adding device entries found in vendor modified versions of this
driver. Function maps for some of the devices follow:
WNC D16Q1, D16Q5, D18Q1 LTE CAT3 module (1435:0918)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Android Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm Wireless HS-USB Ethernet Adapter
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=0918 Rev= 2.32
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
WNC D18 LTE CAT3 module (1435:d182)
MI_00 Qualcomm HS-USB Diagnostics
MI_01 Androd Debug interface
MI_02 Qualcomm HS-USB Modem
MI_03 Qualcomm HS-USB NMEA
MI_04 Qualcomm Wireless HS-USB Ethernet Adapter
MI_05 Qualcomm Wireless HS-USB Ethernet Adapter
MI_06 USB Mass Storage Device
ZM8510/ZM8620/ME3960 (19d2:0396)
MI_00 ZTE Mobile Broadband Diagnostics Port
MI_01 ZTE Mobile Broadband AT Port
MI_02 ZTE Mobile Broadband Modem
MI_03 ZTE Mobile Broadband NDIS Port (qmi_wwan)
MI_04 ZTE Mobile Broadband ADB Port
ME3620_X (19d2:1432)
MI_00 ZTE Diagnostics Device
MI_01 ZTE UI AT Interface
MI_02 ZTE Modem Device
MI_03 ZTE Mobile Broadband Network Adapter
MI_04 ZTE Composite ADB Interface
Reported-by: Lars Melin <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 94389c84ede65..366217263d704 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1122,9 +1122,16 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x0846, 0x68d3, 8)}, /* Netgear Aircard 779S */
{QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
+ {QMI_FIXED_INTF(0x1435, 0x0918, 3)}, /* Wistron NeWeb D16Q1 */
+ {QMI_FIXED_INTF(0x1435, 0x0918, 4)}, /* Wistron NeWeb D16Q1 */
+ {QMI_FIXED_INTF(0x1435, 0x0918, 5)}, /* Wistron NeWeb D16Q1 */
+ {QMI_FIXED_INTF(0x1435, 0x3185, 4)}, /* Wistron NeWeb M18Q5 */
+ {QMI_FIXED_INTF(0x1435, 0xd111, 4)}, /* M9615A DM11-1 D51QC */
{QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */
{QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */
{QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */
+ {QMI_FIXED_INTF(0x1435, 0xd182, 4)}, /* Wistron NeWeb D18 */
+ {QMI_FIXED_INTF(0x1435, 0xd182, 5)}, /* Wistron NeWeb D18 */
{QMI_FIXED_INTF(0x1435, 0xd191, 4)}, /* Wistron NeWeb D19Q1 */
{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */
{QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
@@ -1180,6 +1187,7 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */
{QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */
{QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */
+ {QMI_FIXED_INTF(0x19d2, 0x0396, 3)}, /* ZTE ZM8620 */
{QMI_FIXED_INTF(0x19d2, 0x0412, 4)}, /* Telewell TW-LTE 4G */
{QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */
{QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */
@@ -1200,7 +1208,9 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
{QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */
+ {QMI_FIXED_INTF(0x19d2, 0x1432, 3)}, /* ZTE ME3620 */
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
+ {QMI_FIXED_INTF(0x2001, 0x7e16, 3)}, /* D-Link DWM-221 */
{QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */
{QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */
{QMI_FIXED_INTF(0x2020, 0x2031, 4)}, /* Olicard 600 */
--
2.20.1
[ Upstream commit 22e8860cf8f777fbf6a83f2fb7127f682a8e9de4 ]
regmap_update_bits could fail and deserves a check.
The patch adds the checks and if it fails, returns its error
code upstream.
Signed-off-by: Kangjie Lu <[email protected]>
Reviewed-by: Mukesh Ojha <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/mcr20a.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index 04891429a5542..fe4057fca83d8 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -539,6 +539,8 @@ mcr20a_start(struct ieee802154_hw *hw)
dev_dbg(printdev(lp), "no slotted operation\n");
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
DAR_PHY_CTRL1_SLOTTED, 0x0);
+ if (ret < 0)
+ return ret;
/* enable irq */
enable_irq(lp->spi->irq);
@@ -546,11 +548,15 @@ mcr20a_start(struct ieee802154_hw *hw)
/* Unmask SEQ interrupt */
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL2,
DAR_PHY_CTRL2_SEQMSK, 0x0);
+ if (ret < 0)
+ return ret;
/* Start the RX sequence */
dev_dbg(printdev(lp), "start the RX sequence\n");
ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+ if (ret < 0)
+ return ret;
return 0;
}
--
2.20.1
From: Yifeng Li <[email protected]>
commit 6053d3a4793e5bde6299ac5388e76a3bf679ff65 upstream.
In order to support the 1024x600 panel on Yeeloong Loongson MIPS
laptop, the original 1024x768-16 table was modified to 1024x600-16,
without leaving the original. It causes problem on x86 laptop as
the 1024x768-16 support was still claimed but not working.
Fix it by introducing the 1024x768-16 mode.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 59 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -530,6 +530,65 @@ static const struct modeinit vgamode[] =
0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
},
},
+ { /* 1024 x 768 16Bpp 60Hz */
+ 1024, 768, 16, 60,
+ /* Init_MISC */
+ 0xEB,
+ { /* Init_SR0_SR4 */
+ 0x03, 0x01, 0x0F, 0x03, 0x0E,
+ },
+ { /* Init_SR10_SR24 */
+ 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
+ 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xC4, 0x30, 0x02, 0x01, 0x01,
+ },
+ { /* Init_SR30_SR75 */
+ 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
+ 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
+ 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+ 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
+ 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+ 0x0F, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
+ 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+ 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02,
+ 0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
+ },
+ { /* Init_SR80_SR93 */
+ 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+ 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+ 0x00, 0x00, 0x00, 0x00,
+ },
+ { /* Init_SRA0_SRAF */
+ 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+ 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+ },
+ { /* Init_GR00_GR08 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+ 0xFF,
+ },
+ { /* Init_AR00_AR14 */
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+ 0x41, 0x00, 0x0F, 0x00, 0x00,
+ },
+ { /* Init_CR00_CR18 */
+ 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+ 0xFF,
+ },
+ { /* Init_CR30_CR4D */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+ 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+ 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00,
+ 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF,
+ },
+ { /* Init_CR90_CRA7 */
+ 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+ 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+ 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+ },
+ },
{ /* mode#5: 1024 x 768 24Bpp 60Hz */
1024, 768, 24, 60,
/* Init_MISC */
[ Upstream commit b51ce3744f115850166f3d6c292b9c8cb849ad4f ]
Enablement of AMD's Secure Memory Encryption feature is determined very
early after start_kernel() is entered. Part of this procedure involves
scanning the command line for the parameter 'mem_encrypt'.
To determine intended state, the function sme_enable() uses library
functions cmdline_find_option() and strncmp(). Their use occurs early
enough such that it cannot be assumed that any instrumentation subsystem
is initialized.
For example, making calls to a KASAN-instrumented function before KASAN
is set up will result in the use of uninitialized memory and a boot
failure.
When AMD's SME support is enabled, conditionally disable instrumentation
of these dependent functions in lib/string.c and arch/x86/lib/cmdline.c.
[ bp: Get rid of intermediary nostackp var and cleanup whitespace. ]
Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Reported-by: Li RongQing <[email protected]>
Signed-off-by: Gary R Hook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Coly Li <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: "[email protected]" <[email protected]>
Cc: Sebastian Andrzej Siewior <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/lib/Makefile | 12 ++++++++++++
lib/Makefile | 11 +++++++++++
2 files changed, 23 insertions(+)
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 25a972c61b0ae..3c19d60316a88 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -6,6 +6,18 @@
# Produces uninteresting flaky coverage.
KCOV_INSTRUMENT_delay.o := n
+# Early boot use of cmdline; don't instrument it
+ifdef CONFIG_AMD_MEM_ENCRYPT
+KCOV_INSTRUMENT_cmdline.o := n
+KASAN_SANITIZE_cmdline.o := n
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_cmdline.o = -pg
+endif
+
+CFLAGS_cmdline.o := $(call cc-option, -fno-stack-protector)
+endif
+
inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk
inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt
quiet_cmd_inat_tables = GEN $@
diff --git a/lib/Makefile b/lib/Makefile
index 4238764468109..0ab808318202c 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -17,6 +17,17 @@ KCOV_INSTRUMENT_list_debug.o := n
KCOV_INSTRUMENT_debugobjects.o := n
KCOV_INSTRUMENT_dynamic_debug.o := n
+# Early boot use of cmdline, don't instrument it
+ifdef CONFIG_AMD_MEM_ENCRYPT
+KASAN_SANITIZE_string.o := n
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_string.o = -pg
+endif
+
+CFLAGS_string.o := $(call cc-option, -fno-stack-protector)
+endif
+
lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o timerqueue.o\
idr.o int_sqrt.o extable.o \
--
2.20.1
From: Jean-Philippe Brucker <[email protected]>
commit 6302bf3ef78dd210b5ff4a922afcb7d8eff8a211 upstream.
Two functions allocate a host bridge: devm_pci_alloc_host_bridge() and
pci_alloc_host_bridge(). At the moment, only the unmanaged one initializes
the PCIe feature bits, which prevents from using features such as hotplug
or AER on some systems, when booting with device tree. Make the
initialization code common.
Fixes: 02bfeb484230 ("PCI/portdrv: Simplify PCIe feature permission checking")
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: [email protected] # v4.17+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/probe.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -535,16 +535,9 @@ static void pci_release_host_bridge_dev(
kfree(to_pci_host_bridge(dev));
}
-struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
+static void pci_init_host_bridge(struct pci_host_bridge *bridge)
{
- struct pci_host_bridge *bridge;
-
- bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
- if (!bridge)
- return NULL;
-
INIT_LIST_HEAD(&bridge->windows);
- bridge->dev.release = pci_release_host_bridge_dev;
/*
* We assume we can manage these PCIe features. Some systems may
@@ -557,6 +550,18 @@ struct pci_host_bridge *pci_alloc_host_b
bridge->native_shpc_hotplug = 1;
bridge->native_pme = 1;
bridge->native_ltr = 1;
+}
+
+struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
+{
+ struct pci_host_bridge *bridge;
+
+ bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
+ if (!bridge)
+ return NULL;
+
+ pci_init_host_bridge(bridge);
+ bridge->dev.release = pci_release_host_bridge_dev;
return bridge;
}
@@ -571,7 +576,7 @@ struct pci_host_bridge *devm_pci_alloc_h
if (!bridge)
return NULL;
- INIT_LIST_HEAD(&bridge->windows);
+ pci_init_host_bridge(bridge);
bridge->dev.release = devm_pci_release_host_bridge_dev;
return bridge;
[ Upstream commit 5483844c3fc18474de29f5d6733003526e0a9f78 ]
If tunnel registration failed during module initialization, the module
would fail to deregister the IPPROTO_COMP protocol and would attempt to
deregister the tunnel.
The tunnel was not deregistered during module-exit.
Fixes: dd9ee3444014e ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Signed-off-by: Jeremy Sowden <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/ip_vti.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 40a7cd56e0087..808f8d15c5197 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -659,9 +659,9 @@ static int __init vti_init(void)
return err;
rtnl_link_failed:
- xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
-xfrm_tunnel_failed:
xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
+xfrm_tunnel_failed:
+ xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
xfrm_proto_comp_failed:
xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
xfrm_proto_ah_failed:
@@ -676,6 +676,7 @@ pernet_dev_failed:
static void __exit vti_fini(void)
{
rtnl_link_unregister(&vti_link_ops);
+ xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
xfrm4_protocol_deregister(&vti_ipcomp4_protocol, IPPROTO_COMP);
xfrm4_protocol_deregister(&vti_ah4_protocol, IPPROTO_AH);
xfrm4_protocol_deregister(&vti_esp4_protocol, IPPROTO_ESP);
--
2.20.1
From: Nikolai Kostrigin <[email protected]>
commit d28ca864c493637f3c957f4ed9348a94fca6de60 upstream.
ATS is broken on the Radeon R7 GPU (at least for Stoney Ridge based laptop)
and causes IOMMU stalls and system failure. Disable ATS on these devices
to make them usable again with IOMMU enabled.
Thanks to Joerg Roedel <[email protected]> for help.
[bhelgaas: In the email thread mentioned below, Alex suspects the real
problem is in sbios or iommu, so it may affect only certain systems, and it
may affect other devices in those systems as well. However, per Joerg we
lack the ability to debug further, so this quirk is the best we can do for
now.]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194521
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken")
Signed-off-by: Nikolai Kostrigin <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Joerg Roedel <[email protected]>
CC: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4878,6 +4878,7 @@ static void quirk_no_ats(struct pci_dev
/* AMD Stoney platform GPU */
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_no_ats);
#endif /* CONFIG_PCI_ATS */
/* Freescale PCIe doesn't support MSI in RC mode */
[ Upstream commit 349ced9984ff540ce74ca8a0b2e9b03dc434b9dd ]
Fix a similar endless event loop as was done in commit
8dcf32175b4e ("i2c: prevent endless uevent loop with
CONFIG_I2C_DEBUG_CORE"):
The culprit is the dev_dbg printk in the i2c uevent handler. If
this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results
in an endless loop with systemd-journald.
This happens if user-space scans the system log and reads the uevent
file to get information about a newly created device, which seems
fair use to me. Unfortunately reading the "uevent" file uses the
same function that runs for creating the uevent for a new device,
generating the next syslog entry
Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported
in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former
seems to have been fixed. Drop debug prints as it was done in I2C
subsystem to resolve the issue.
Signed-off-by: Andrey Smirnov <[email protected]>
Cc: Chris Healy <[email protected]>
Cc: [email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/power_supply_sysfs.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index 6170ed8b6854b..5a2757a7f4088 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -382,15 +382,11 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
char *prop_buf;
char *attrname;
- dev_dbg(dev, "uevent\n");
-
if (!psy || !psy->desc) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
- dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->desc->name);
-
ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->desc->name);
if (ret)
return ret;
@@ -426,8 +422,6 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
goto out;
}
- dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf);
-
ret = add_uevent_var(env, "POWER_SUPPLY_%s=%s", attrname, prop_buf);
kfree(attrname);
if (ret)
--
2.20.1
[ Upstream commit 6ee02a54ef990a71bf542b6f0a4e3321de9d9c66 ]
When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly
frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the
xfrm6_tunnel_spi, so need to wait it.
Fixes: 91cc3bb0b04ff("xfrm6_tunnel: RCU conversion")
Signed-off-by: Su Yanjun <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/xfrm6_tunnel.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index bc65db782bfb1..12cb3aa990af4 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -402,6 +402,10 @@ static void __exit xfrm6_tunnel_fini(void)
xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6);
xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6);
unregister_pernet_subsys(&xfrm6_tunnel_net_ops);
+ /* Someone maybe has gotten the xfrm6_tunnel_spi.
+ * So need to wait it.
+ */
+ rcu_barrier();
kmem_cache_destroy(xfrm6_tunnel_spi_kmem);
}
--
2.20.1
[ Upstream commit 2abc330c514fe56c570bb1a6318b054b06a4f72e ]
Sometimes one of the nkmp factors is unused. This means that one of the
factors shift and width values are set to 0. Current nkmp clock code
generates a mask for each factor with GENMASK(width + shift - 1, shift).
For unused factor this translates to GENMASK(-1, 0). This code is
further expanded by C preprocessor to final version:
(((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1))))
or a bit simplified:
(~0UL & (~0UL >> BITS_PER_LONG))
It turns out that result of the second part (~0UL >> BITS_PER_LONG) is
actually undefined by C standard, which clearly specifies:
"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."
Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave
different results whether literals or variables with same values as
literals were used. GENMASK with literals -1 and 0 gives zero and with
variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses
GENMASK with variables as parameter, expression calculates mask as ~0UL
instead of 0. This has further consequences that LSB in register is
always set to 1 (1 is neutral value for a factor and shift is 0).
For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but
due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be
too low because following warning can be found in dmesg:
[ 1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.763378] Modules linked in:
[ 1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-20190401 #138
[ 1.774269] Hardware name: Pine H64 (DT)
[ 1.778200] Workqueue: events deferred_probe_work_func
[ 1.783341] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90
[ 1.799107] sp : ffff000010f93840
[ 1.802422] x29: ffff000010f93840 x28: 0000000000000000
[ 1.807735] x27: ffff800073ce9d80 x26: ffff000010afd1b8
[ 1.813049] x25: ffffffffffffffff x24: 00000000ffffffff
[ 1.818362] x23: 0000000000000001 x22: ffff000010abd5c8
[ 1.823675] x21: 0000000010000000 x20: 00000000685f367e
[ 1.828987] x19: 0000000000001801 x18: 0000000000000001
[ 1.834300] x17: 0000000000000001 x16: 0000000000000000
[ 1.839613] x15: 0000000000000000 x14: ffff000010789858
[ 1.844926] x13: 0000000000000000 x12: 0000000000000001
[ 1.850239] x11: 0000000000000000 x10: 0000000000000970
[ 1.855551] x9 : ffff000010f936c0 x8 : ffff800074cec0d0
[ 1.860864] x7 : 0000800067117000 x6 : 0000000115c30b41
[ 1.866177] x5 : 00ffffffffffffff x4 : 002c959300bfe500
[ 1.871490] x3 : 0000000000000018 x2 : 0000000029aaaaab
[ 1.876802] x1 : 00000000000002e6 x0 : 00000000686072bc
[ 1.882114] Call trace:
[ 1.884565] ccu_helper_wait_for_lock.part.0+0x6c/0x90
[ 1.889705] ccu_helper_wait_for_lock+0x10/0x20
[ 1.894236] ccu_nkmp_set_rate+0x244/0x2a8
[ 1.898334] clk_change_rate+0x144/0x290
[ 1.902258] clk_core_set_rate_nolock+0x180/0x1b8
[ 1.906963] clk_set_rate+0x34/0xa0
[ 1.910455] sun8i_mixer_bind+0x484/0x558
[ 1.914466] component_bind_all+0x10c/0x230
[ 1.918651] sun4i_drv_bind+0xc4/0x1a0
[ 1.922401] try_to_bring_up_master+0x164/0x1c0
[ 1.926932] __component_add+0xa0/0x168
[ 1.930769] component_add+0x10/0x18
[ 1.934346] sun8i_dw_hdmi_probe+0x18/0x20
[ 1.938443] platform_drv_probe+0x50/0xa0
[ 1.942455] really_probe+0xcc/0x280
[ 1.946032] driver_probe_device+0x54/0xe8
[ 1.950130] __device_attach_driver+0x80/0xb8
[ 1.954488] bus_for_each_drv+0x78/0xc8
[ 1.958326] __device_attach+0xd4/0x130
[ 1.962163] device_initial_probe+0x10/0x18
[ 1.966348] bus_probe_device+0x90/0x98
[ 1.970185] deferred_probe_work_func+0x6c/0xa0
[ 1.974720] process_one_work+0x1e0/0x320
[ 1.978732] worker_thread+0x228/0x428
[ 1.982484] kthread+0x120/0x128
[ 1.985714] ret_from_fork+0x10/0x18
[ 1.989290] ---[ end trace 9babd42e1ca4b84f ]---
This commit solves the issue by first checking value of the factor
width. If it is equal to 0 (unused factor), mask is set to 0, otherwise
GENMASK() macro is used as before.
Fixes: d897ef56faf9 ("clk: sunxi-ng: Mask nkmp factors when setting register")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/sunxi-ng/ccu_nkmp.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index ebd9436d2c7cd..1ad53d1016a3e 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -160,7 +160,7 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
- u32 n_mask, k_mask, m_mask, p_mask;
+ u32 n_mask = 0, k_mask = 0, m_mask = 0, p_mask = 0;
struct _ccu_nkmp _nkmp;
unsigned long flags;
u32 reg;
@@ -179,10 +179,18 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
- n_mask = GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift);
- k_mask = GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift);
- m_mask = GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift);
- p_mask = GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift);
+ if (nkmp->n.width)
+ n_mask = GENMASK(nkmp->n.width + nkmp->n.shift - 1,
+ nkmp->n.shift);
+ if (nkmp->k.width)
+ k_mask = GENMASK(nkmp->k.width + nkmp->k.shift - 1,
+ nkmp->k.shift);
+ if (nkmp->m.width)
+ m_mask = GENMASK(nkmp->m.width + nkmp->m.shift - 1,
+ nkmp->m.shift);
+ if (nkmp->p.width)
+ p_mask = GENMASK(nkmp->p.width + nkmp->p.shift - 1,
+ nkmp->p.shift);
spin_lock_irqsave(nkmp->common.lock, flags);
--
2.20.1
From: Jeff Layton <[email protected]>
commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream.
xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.
Cc: [email protected]
Link: http://tracker.ceph.com/issues/39571
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: "Yan, Zheng" <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/super.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -819,6 +819,12 @@ static void ceph_umount_begin(struct sup
return;
}
+static int ceph_remount(struct super_block *sb, int *flags, char *data)
+{
+ sync_filesystem(sb);
+ return 0;
+}
+
static const struct super_operations ceph_super_ops = {
.alloc_inode = ceph_alloc_inode,
.destroy_inode = ceph_destroy_inode,
@@ -826,6 +832,7 @@ static const struct super_operations cep
.drop_inode = ceph_drop_inode,
.sync_fs = ceph_sync_fs,
.put_super = ceph_put_super,
+ .remount_fs = ceph_remount,
.show_options = ceph_show_options,
.statfs = ceph_statfs,
.umount_begin = ceph_umount_begin,
[ Upstream commit de1887c064b9996ac03120d90d0a909a3f678f98 ]
We don't check for the validity of the lengths in the packet received
from the firmware. If the MPDU length received in the rx descriptor
is too short to contain the header length and the crypt length
together, we may end up trying to copy a negative number of bytes
(headlen - hdrlen < 0) which will underflow and cause us to try to
copy a huge amount of data. This causes oopses such as this one:
BUG: unable to handle kernel paging request at ffff896be2970000
PGD 5e201067 P4D 5e201067 PUD 5e205067 PMD 16110d063 PTE 8000000162970161
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 1824 Comm: irq/134-iwlwifi Not tainted 4.19.33-04308-geea41cf4930f #1
Hardware name: [...]
RIP: 0010:memcpy_erms+0x6/0x10
Code: 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3
0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe
RSP: 0018:ffffa4630196fc60 EFLAGS: 00010287
RAX: ffff896be2924618 RBX: ffff896bc8ecc600 RCX: 00000000fffb4610
RDX: 00000000fffffff8 RSI: ffff896a835e2a38 RDI: ffff896be2970000
RBP: ffffa4630196fd30 R08: ffff896bc8ecc600 R09: ffff896a83597000
R10: ffff896bd6998400 R11: 000000000200407f R12: ffff896a83597050
R13: 00000000fffffff8 R14: 0000000000000010 R15: ffff896a83597038
FS: 0000000000000000(0000) GS:ffff896be8280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff896be2970000 CR3: 000000005dc12002 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iwl_mvm_rx_mpdu_mq+0xb51/0x121b [iwlmvm]
iwl_pcie_rx_handle+0x58c/0xa89 [iwlwifi]
iwl_pcie_irq_rx_msix_handler+0xd9/0x12a [iwlwifi]
irq_thread_fn+0x24/0x49
irq_thread+0xb0/0x122
kthread+0x138/0x140
ret_from_fork+0x1f/0x40
Fix that by checking the lengths for correctness and trigger a warning
to show that we have received wrong data.
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 28 ++++++++++++++++---
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index b53148f972a4a..036d1d82d93e7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -143,9 +143,9 @@ static inline int iwl_mvm_check_pn(struct iwl_mvm *mvm, struct sk_buff *skb,
}
/* iwl_mvm_create_skb Adds the rxb to a new skb */
-static void iwl_mvm_create_skb(struct sk_buff *skb, struct ieee80211_hdr *hdr,
- u16 len, u8 crypt_len,
- struct iwl_rx_cmd_buffer *rxb)
+static int iwl_mvm_create_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
+ struct ieee80211_hdr *hdr, u16 len, u8 crypt_len,
+ struct iwl_rx_cmd_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_rx_mpdu_desc *desc = (void *)pkt->data;
@@ -178,6 +178,20 @@ static void iwl_mvm_create_skb(struct sk_buff *skb, struct ieee80211_hdr *hdr,
* present before copying packet data.
*/
hdrlen += crypt_len;
+
+ if (WARN_ONCE(headlen < hdrlen,
+ "invalid packet lengths (hdrlen=%d, len=%d, crypt_len=%d)\n",
+ hdrlen, len, crypt_len)) {
+ /*
+ * We warn and trace because we want to be able to see
+ * it in trace-cmd as well.
+ */
+ IWL_DEBUG_RX(mvm,
+ "invalid packet lengths (hdrlen=%d, len=%d, crypt_len=%d)\n",
+ hdrlen, len, crypt_len);
+ return -EINVAL;
+ }
+
skb_put_data(skb, hdr, hdrlen);
skb_put_data(skb, (u8 *)hdr + hdrlen + pad_len, headlen - hdrlen);
@@ -190,6 +204,8 @@ static void iwl_mvm_create_skb(struct sk_buff *skb, struct ieee80211_hdr *hdr,
skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset,
fraglen, rxb->truesize);
}
+
+ return 0;
}
/* iwl_mvm_pass_packet_to_mac80211 - passes the packet for mac80211 */
@@ -1425,7 +1441,11 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi,
rx_status->boottime_ns = ktime_get_boot_ns();
}
- iwl_mvm_create_skb(skb, hdr, len, crypt_len, rxb);
+ if (iwl_mvm_create_skb(mvm, skb, hdr, len, crypt_len, rxb)) {
+ kfree_skb(skb);
+ goto out;
+ }
+
if (!iwl_mvm_reorder(mvm, napi, queue, sta, skb, desc))
iwl_mvm_pass_packet_to_mac80211(mvm, napi, skb, queue, sta);
out:
--
2.20.1
From: Yifeng Li <[email protected]>
commit ec1587d5073f29820e358f3a383850d61601d981 upstream.
When the machine is booted in VGA mode, loading sm712fb would cause
a glitch of random pixels shown on the screen. To prevent it from
happening, we first clear the entire framebuffer, and we also need
to stop calling smtcfb_setmode() during initialization, the fbdev
layer will call it for us later when it's ready.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1493,7 +1493,11 @@ static int smtcfb_pci_probe(struct pci_d
if (err)
goto failed;
- smtcfb_setmode(sfb);
+ /*
+ * The screen would be temporarily garbled when sm712fb takes over
+ * vesafb or VGA text mode. Zero the framebuffer.
+ */
+ memset_io(sfb->lfb, 0, sfb->fb->fix.smem_len);
err = register_framebuffer(info);
if (err < 0)
From: Amir Goldstein <[email protected]>
commit 3428030da004a1128cbdcf93dc03e16f184d845b upstream.
Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.
The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion. File may be open O_RDONLY, but ioctl modifies the
file. VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.
Fixes: dab5ca8fd9dd ("ovl: add lsattr/chattr support")
Cc: <[email protected]> # v4.19
Signed-off-by: Amir Goldstein <[email protected]>
Acked-by: Vivek Goyal <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/copy_up.c | 6 +++---
fs/overlayfs/file.c | 5 ++---
fs/overlayfs/overlayfs.h | 2 +-
3 files changed, 6 insertions(+), 7 deletions(-)
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -878,14 +878,14 @@ static bool ovl_open_need_copy_up(struct
return true;
}
-int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags)
+int ovl_maybe_copy_up(struct dentry *dentry, int flags)
{
int err = 0;
- if (ovl_open_need_copy_up(dentry, file_flags)) {
+ if (ovl_open_need_copy_up(dentry, flags)) {
err = ovl_want_write(dentry);
if (!err) {
- err = ovl_copy_up_flags(dentry, file_flags);
+ err = ovl_copy_up_flags(dentry, flags);
ovl_drop_write(dentry);
}
}
--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -116,11 +116,10 @@ static int ovl_real_fdget(const struct f
static int ovl_open(struct inode *inode, struct file *file)
{
- struct dentry *dentry = file_dentry(file);
struct file *realfile;
int err;
- err = ovl_open_maybe_copy_up(dentry, file->f_flags);
+ err = ovl_maybe_copy_up(file_dentry(file), file->f_flags);
if (err)
return err;
@@ -390,7 +389,7 @@ static long ovl_ioctl(struct file *file,
if (ret)
return ret;
- ret = ovl_copy_up_with_data(file_dentry(file));
+ ret = ovl_maybe_copy_up(file_dentry(file), O_WRONLY);
if (!ret) {
ret = ovl_real_ioctl(file, cmd, arg);
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -411,7 +411,7 @@ extern const struct file_operations ovl_
int ovl_copy_up(struct dentry *dentry);
int ovl_copy_up_with_data(struct dentry *dentry);
int ovl_copy_up_flags(struct dentry *dentry, int flags);
-int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags);
+int ovl_maybe_copy_up(struct dentry *dentry, int flags);
int ovl_copy_xattr(struct dentry *old, struct dentry *new);
int ovl_set_attr(struct dentry *upper, struct kstat *stat);
struct ovl_fh *ovl_encode_real_fh(struct dentry *real, bool is_upper);
From: Yifeng Li <[email protected]>
commit dcf9070595e100942c539e229dde4770aaeaa4e9 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.
Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.
Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1146,7 +1146,9 @@ static void sm7xx_set_timing(struct smtc
/* init SEQ register SR30 - SR75 */
for (i = 0; i < SIZE_SR30_SR75; i++)
if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 &&
- (i + 0x30) != 0x6a && (i + 0x30) != 0x6b)
+ (i + 0x30) != 0x6a && (i + 0x30) != 0x6b &&
+ (i + 0x30) != 0x70 && (i + 0x30) != 0x71 &&
+ (i + 0x30) != 0x74 && (i + 0x30) != 0x75)
smtc_seqw(i + 0x30,
vgamode[j].init_sr30_sr75[i]);
From: Ard Biesheuvel <[email protected]>
commit f8585539df0a1527c78b5d760665c89fe1c105a9 upstream.
The following commit:
38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
updated the EFI framebuffer code to use memory mappings for the linear
framebuffer that are permitted by the memory attributes described by the
EFI memory map for the particular region, if the framebuffer happens to
be covered by the EFI memory map (which is typically only the case for
framebuffers in shared memory). This is required since non-x86 systems
may require cacheable attributes for memory mappings that are shared
with other masters (such as GPUs), and this information cannot be
described by the Graphics Output Protocol (GOP) EFI protocol itself,
and so we rely on the EFI memory map for this.
As reported by James, this breaks some x86 systems:
[ 1.173368] efifb: probing for efifb
[ 1.173386] efifb: abort, cannot remap video memory 0x1d5000 @ 0xcf800000
[ 1.173395] Trying to free nonexistent resource <00000000cf800000-00000000cf9d4bff>
[ 1.173413] efi-framebuffer: probe of efi-framebuffer.0 failed with error -5
The problem turns out to be that the memory map entry that describes the
framebuffer has no memory attributes listed at all, and so we end up with
a mem_flags value of 0x0.
So work around this by ensuring that the memory map entry's attribute field
has a sane value before using it to mask the set of usable attributes.
Reported-by: James Hilliard <[email protected]>
Tested-by: James Hilliard <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: <[email protected]> # v4.19+
Cc: Borislav Petkov <[email protected]>
Cc: James Morse <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Jones <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when ...")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/efifb.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -476,8 +476,12 @@ static int efifb_probe(struct platform_d
* If the UEFI memory map covers the efifb region, we may only
* remap it using the attributes the memory map prescribes.
*/
- mem_flags |= EFI_MEMORY_WT | EFI_MEMORY_WB;
- mem_flags &= md.attribute;
+ md.attribute &= EFI_MEMORY_UC | EFI_MEMORY_WC |
+ EFI_MEMORY_WT | EFI_MEMORY_WB;
+ if (md.attribute) {
+ mem_flags |= EFI_MEMORY_WT | EFI_MEMORY_WB;
+ mem_flags &= md.attribute;
+ }
}
if (mem_flags & EFI_MEMORY_WC)
info->screen_base = ioremap_wc(efifb_fix.smem_start,
From: Stefan Mätje <[email protected]>
commit 86fa6a344209d9414ea962b1f1ac6ade9dd7563a upstream.
Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk. No
functional change intended.
Signed-off-by: Stefan Mätje <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
CC: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pcie/aspm.c | 40 ++++++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 16 deletions(-)
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -198,6 +198,29 @@ static void pcie_clkpm_cap_init(struct p
link->clkpm_capable = (blacklist) ? 0 : capable;
}
+static bool pcie_retrain_link(struct pcie_link_state *link)
+{
+ struct pci_dev *parent = link->pdev;
+ unsigned long start_jiffies;
+ u16 reg16;
+
+ pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16);
+ reg16 |= PCI_EXP_LNKCTL_RL;
+ pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+
+ /* Wait for link training end. Break out after waiting for timeout */
+ start_jiffies = jiffies;
+ for (;;) {
+ pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16);
+ if (!(reg16 & PCI_EXP_LNKSTA_LT))
+ break;
+ if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
+ break;
+ msleep(1);
+ }
+ return !(reg16 & PCI_EXP_LNKSTA_LT);
+}
+
/*
* pcie_aspm_configure_common_clock: check if the 2 ends of a link
* could use common clock. If they are, configure them to use the
@@ -207,7 +230,6 @@ static void pcie_aspm_configure_common_c
{
int same_clock = 1;
u16 reg16, parent_reg, child_reg[8];
- unsigned long start_jiffies;
struct pci_dev *child, *parent = link->pdev;
struct pci_bus *linkbus = parent->subordinate;
/*
@@ -265,21 +287,7 @@ static void pcie_aspm_configure_common_c
reg16 &= ~PCI_EXP_LNKCTL_CCC;
pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
- /* Retrain link */
- reg16 |= PCI_EXP_LNKCTL_RL;
- pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
-
- /* Wait for link training end. Break out after waiting for timeout */
- start_jiffies = jiffies;
- for (;;) {
- pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16);
- if (!(reg16 & PCI_EXP_LNKSTA_LT))
- break;
- if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
- break;
- msleep(1);
- }
- if (!(reg16 & PCI_EXP_LNKSTA_LT))
+ if (pcie_retrain_link(link))
return;
/* Training failed. Restore common clock configurations */
From: Florian Fainelli <[email protected]>
commit 1b1f01b653b408ebe58fec78c566d1075d285c64 upstream.
arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event':
arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable]
struct perf_event *event = container_of(evt, struct perf_event, hw);
^~~~~
Fix this by making use of IS_ENABLED() to simplify the code and avoid
unnecessary ifdefery.
Fixes: 84002c88599d ("MIPS: perf: Fix perf with MT counting other threads")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: Peter Zijlstra <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v4.18+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/perf_event_mipsxx.c | 21 +++------------------
1 file changed, 3 insertions(+), 18 deletions(-)
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -64,17 +64,11 @@ struct mips_perf_event {
#define CNTR_EVEN 0x55555555
#define CNTR_ODD 0xaaaaaaaa
#define CNTR_ALL 0xffffffff
-#ifdef CONFIG_MIPS_MT_SMP
enum {
T = 0,
V = 1,
P = 2,
} range;
-#else
- #define T
- #define V
- #define P
-#endif
};
static struct mips_perf_event raw_event;
@@ -325,9 +319,7 @@ static void mipsxx_pmu_enable_event(stru
{
struct perf_event *event = container_of(evt, struct perf_event, hw);
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-#ifdef CONFIG_MIPS_MT_SMP
unsigned int range = evt->event_base >> 24;
-#endif /* CONFIG_MIPS_MT_SMP */
WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
@@ -336,21 +328,15 @@ static void mipsxx_pmu_enable_event(stru
/* Make sure interrupt enabled. */
MIPS_PERFCTRL_IE;
-#ifdef CONFIG_CPU_BMIPS5000
- {
+ if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
/* enable the counter for the calling thread */
cpuc->saved_ctrl[idx] |=
(1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
- }
-#else
-#ifdef CONFIG_MIPS_MT_SMP
- if (range > V) {
+ } else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
/* The counter is processor wide. Set it up to count all TCs. */
pr_debug("Enabling perf counter for all TCs\n");
cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
- } else
-#endif /* CONFIG_MIPS_MT_SMP */
- {
+ } else {
unsigned int cpu, ctrl;
/*
@@ -365,7 +351,6 @@ static void mipsxx_pmu_enable_event(stru
cpuc->saved_ctrl[idx] |= ctrl;
pr_debug("Enabling perf counter for CPU%d\n", cpu);
}
-#endif /* CONFIG_CPU_BMIPS5000 */
/*
* We do not actually let the counter run. Leave it until start().
*/
From: Steve Longerbeam <[email protected]>
commit 107927fa597c99eaeee4f51865ca0956ec71b6a2 upstream.
In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must
be cleared for each endpoint iteration, otherwise if the remote port
has no "reg" property, link.remote_port will not be reset to zero.
This was discovered on the i.MX53 SMD board, since the OV5642 connects
directly to ipu1_csi0 and has a single source port with no "reg"
property.
Fixes: 621b08eabcddb ("media: staging/imx: remove static media link arrays")
Signed-off-by: Steve Longerbeam <[email protected]>
Cc: [email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/imx/imx-media-of.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/staging/media/imx/imx-media-of.c
+++ b/drivers/staging/media/imx/imx-media-of.c
@@ -233,15 +233,18 @@ int imx_media_create_csi_of_links(struct
struct v4l2_subdev *csi)
{
struct device_node *csi_np = csi->dev->of_node;
- struct fwnode_handle *fwnode, *csi_ep;
- struct v4l2_fwnode_link link;
struct device_node *ep;
- int ret;
-
- link.local_node = of_fwnode_handle(csi_np);
- link.local_port = CSI_SINK_PAD;
for_each_child_of_node(csi_np, ep) {
+ struct fwnode_handle *fwnode, *csi_ep;
+ struct v4l2_fwnode_link link;
+ int ret;
+
+ memset(&link, 0, sizeof(link));
+
+ link.local_node = of_fwnode_handle(csi_np);
+ link.local_port = CSI_SINK_PAD;
+
csi_ep = of_fwnode_handle(ep);
fwnode = fwnode_graph_get_remote_endpoint(csi_ep);
From: Damien Le Moal <[email protected]>
commit 7aedf75ff740a98f3683439449cd91c8662d03b2 upstream.
The function blkdev_report_zones() returns success even if no zone
information is reported (empty report). Empty zone reports can only
happen if the report start sector passed exceeds the device capacity.
The conditions for this to happen are either a bug in the caller code,
or, a change in the device that forced the low level driver to change
the device capacity to a value that is lower than the report start
sector. This situation includes a failed disk revalidation resulting in
the disk capacity being changed to 0.
If this change happens while dm-zoned is in its initialization phase
executing dmz_init_zones(), this function may enter an infinite loop
and hang the system. To avoid this, add a check to disallow empty zone
reports and bail out early. Also fix the function dmz_update_zone() to
make sure that the report for the requested zone was correctly obtained.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Shaun Tancheff <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-zoned-metadata.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/md/dm-zoned-metadata.c
+++ b/drivers/md/dm-zoned-metadata.c
@@ -1169,6 +1169,9 @@ static int dmz_init_zones(struct dmz_met
goto out;
}
+ if (!nr_blkz)
+ break;
+
/* Process report */
for (i = 0; i < nr_blkz; i++) {
ret = dmz_init_zone(zmd, zone, &blkz[i]);
@@ -1204,6 +1207,8 @@ static int dmz_update_zone(struct dmz_me
/* Get zone information from disk */
ret = blkdev_report_zones(zmd->dev->bdev, dmz_start_sect(zmd, zone),
&blkz, &nr_blkz, GFP_NOIO);
+ if (!nr_blkz)
+ ret = -EIO;
if (ret) {
dmz_dev_err(zmd->dev, "Get zone %u report failed",
dmz_id(zmd, zone));
From: Colin Ian King <[email protected]>
commit e6577cb5103b7ca7c0204c0c86ef4af8aa6288f6 upstream.
There seems to be a missing bit-wise or operator when setting val,
fix this by adding it in.
Fixes: 2796ceb0c18a ("phy: ti-pipe3: Update pcie phy settings")
Cc: [email protected] # v4.19+
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/ti/phy-ti-pipe3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -303,7 +303,7 @@ static void ti_pipe3_calibrate(struct ti
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
- val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
+ val |= (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
From: Yifeng Li <[email protected]>
commit f627caf55b8e735dcec8fa6538e9668632b55276 upstream.
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display
or starting the X server will crash and freeze the system, or garble the
display.
Experiments showed this problem can mostly be solved by adjusting the
order of register writes. Also, sm712fb failed to consider the difference
of clock frequency when unblanking the display, and programs the clock for
SM712 to SM720.
Fix them by adjusting the order of register writes, and adding an
additional check for SM720 for programming the clock frequency.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 64 ++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 26 deletions(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -886,67 +886,79 @@ static inline unsigned int chan_to_field
static int smtc_blank(int blank_mode, struct fb_info *info)
{
+ struct smtcfb_info *sfb = info->par;
+
/* clear DPMS setting */
switch (blank_mode) {
case FB_BLANK_UNBLANK:
/* Screen On: HSync: On, VSync : On */
+
+ switch (sfb->chip_id) {
+ case 0x710:
+ case 0x712:
+ smtc_seqw(0x6a, 0x16);
+ smtc_seqw(0x6b, 0x02);
+ case 0x720:
+ smtc_seqw(0x6a, 0x0d);
+ smtc_seqw(0x6b, 0x02);
+ break;
+ }
+
+ smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0)));
smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20)));
- smtc_seqw(0x6a, 0x16);
- smtc_seqw(0x6b, 0x02);
smtc_seqw(0x21, (smtc_seqr(0x21) & 0x77));
smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30)));
- smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0)));
- smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01));
smtc_seqw(0x31, (smtc_seqr(0x31) | 0x03));
+ smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01));
break;
case FB_BLANK_NORMAL:
/* Screen Off: HSync: On, VSync : On Soft blank */
+ smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01));
+ smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
+ smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0)));
smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20)));
+ smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30)));
smtc_seqw(0x6a, 0x16);
smtc_seqw(0x6b, 0x02);
- smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30)));
- smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0)));
- smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01));
- smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
break;
case FB_BLANK_VSYNC_SUSPEND:
/* Screen On: HSync: On, VSync : Off */
+ smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
+ smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
+ smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20));
smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20));
- smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
- smtc_seqw(0x6a, 0x0c);
- smtc_seqw(0x6b, 0x02);
smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88));
+ smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x20));
- smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20));
- smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
- smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80));
+ smtc_seqw(0x6a, 0x0c);
+ smtc_seqw(0x6b, 0x02);
break;
case FB_BLANK_HSYNC_SUSPEND:
/* Screen On: HSync: Off, VSync : On */
+ smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
+ smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
+ smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8));
smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20));
- smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
- smtc_seqw(0x6a, 0x0c);
- smtc_seqw(0x6b, 0x02);
smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88));
+ smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x10));
- smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8));
- smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
- smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80));
+ smtc_seqw(0x6a, 0x0c);
+ smtc_seqw(0x6b, 0x02);
break;
case FB_BLANK_POWERDOWN:
/* Screen On: HSync: Off, VSync : Off */
+ smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
+ smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
+ smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8));
smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20));
- smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
- smtc_seqw(0x6a, 0x0c);
- smtc_seqw(0x6b, 0x02);
smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88));
+ smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0)));
smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x30));
- smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8));
- smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01)));
- smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00));
smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80));
+ smtc_seqw(0x6a, 0x0c);
+ smtc_seqw(0x6b, 0x02);
break;
default:
return -EINVAL;
From: Phong Tran <[email protected]>
commit 440868661f36071886ed360d91de83bd67c73b4f upstream.
Now, make the loop explicit to avoid clang warning.
./include/linux/of.h:238:37: warning: multiple unsequenced modifications
to 'cell' [-Wunsequenced]
r = (r << 32) | be32_to_cpu(*(cell++));
^~
./include/linux/byteorder/generic.h:95:21: note: expanded from macro
'be32_to_cpu'
^
./include/uapi/linux/byteorder/little_endian.h:40:59: note: expanded
from macro '__be32_to_cpu'
^
./include/uapi/linux/swab.h:118:21: note: expanded from macro '__swab32'
___constant_swab32(x) : \
^
./include/uapi/linux/swab.h:18:12: note: expanded from macro
'___constant_swab32'
(((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
^
Signed-off-by: Phong Tran <[email protected]>
Reported-by: Nick Desaulniers <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/460
Suggested-by: David Laight <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Cc: [email protected]
[robh: fix up whitespace]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/of.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -236,8 +236,8 @@ extern struct device_node *of_find_all_n
static inline u64 of_read_number(const __be32 *cell, int size)
{
u64 r = 0;
- while (size--)
- r = (r << 32) | be32_to_cpu(*(cell++));
+ for (; size--; cell++)
+ r = (r << 32) | be32_to_cpu(*cell);
return r;
}
From: Mikulas Patocka <[email protected]>
commit bd86b6c5c60711dbd4fa21bdb497a188ecb6cf63 upstream.
Remove the unused parameter "data" and unused variable "ret".
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: Bernie Thompson <[email protected]>
Cc: Ladislav Michl <[email protected]>
Cc: <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/udlfb.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -594,10 +594,9 @@ static int dlfb_render_hline(struct dlfb
return 0;
}
-static int dlfb_handle_damage(struct dlfb_data *dlfb, int x, int y,
- int width, int height, char *data)
+static int dlfb_handle_damage(struct dlfb_data *dlfb, int x, int y, int width, int height)
{
- int i, ret;
+ int i;
char *cmd;
cycles_t start_cycles, end_cycles;
int bytes_sent = 0;
@@ -641,7 +640,7 @@ static int dlfb_handle_damage(struct dlf
*cmd++ = 0xAF;
/* Send partial buffer remaining before exiting */
len = cmd - (char *) urb->transfer_buffer;
- ret = dlfb_submit_urb(dlfb, urb, len);
+ dlfb_submit_urb(dlfb, urb, len);
bytes_sent += len;
} else
dlfb_urb_completion(urb);
@@ -679,7 +678,7 @@ static ssize_t dlfb_ops_write(struct fb_
(u32)info->var.yres);
dlfb_handle_damage(dlfb, 0, start, info->var.xres,
- lines, info->screen_base);
+ lines);
}
return result;
@@ -695,7 +694,7 @@ static void dlfb_ops_copyarea(struct fb_
sys_copyarea(info, area);
dlfb_handle_damage(dlfb, area->dx, area->dy,
- area->width, area->height, info->screen_base);
+ area->width, area->height);
}
static void dlfb_ops_imageblit(struct fb_info *info,
@@ -706,7 +705,7 @@ static void dlfb_ops_imageblit(struct fb
sys_imageblit(info, image);
dlfb_handle_damage(dlfb, image->dx, image->dy,
- image->width, image->height, info->screen_base);
+ image->width, image->height);
}
static void dlfb_ops_fillrect(struct fb_info *info,
@@ -717,7 +716,7 @@ static void dlfb_ops_fillrect(struct fb_
sys_fillrect(info, rect);
dlfb_handle_damage(dlfb, rect->dx, rect->dy, rect->width,
- rect->height, info->screen_base);
+ rect->height);
}
/*
@@ -859,8 +858,7 @@ static int dlfb_ops_ioctl(struct fb_info
if (area.y > info->var.yres)
area.y = info->var.yres;
- dlfb_handle_damage(dlfb, area.x, area.y, area.w, area.h,
- info->screen_base);
+ dlfb_handle_damage(dlfb, area.x, area.y, area.w, area.h);
}
return 0;
@@ -1065,8 +1063,7 @@ static int dlfb_ops_set_par(struct fb_in
pix_framebuffer[i] = 0x37e6;
}
- dlfb_handle_damage(dlfb, 0, 0, info->var.xres, info->var.yres,
- info->screen_base);
+ dlfb_handle_damage(dlfb, 0, 0, info->var.xres, info->var.yres);
return 0;
}
From: Dmitry Osipenko <[email protected]>
commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream.
There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.
Cc: <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-By: Peter De Schrijver <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/tegra/clk-pll.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -662,8 +662,8 @@ static void _update_pll_mnp(struct tegra
pll_override_writel(val, params->pmc_divp_reg, pll);
val = pll_override_readl(params->pmc_divnm_reg, pll);
- val &= ~(divm_mask(pll) << div_nmp->override_divm_shift) |
- ~(divn_mask(pll) << div_nmp->override_divn_shift);
+ val &= ~((divm_mask(pll) << div_nmp->override_divm_shift) |
+ (divn_mask(pll) << div_nmp->override_divn_shift));
val |= (cfg->m << div_nmp->override_divm_shift) |
(cfg->n << div_nmp->override_divn_shift);
pll_override_writel(val, params->pmc_divnm_reg, pll);
From: Sabrina Dubroca <[email protected]>
[ Upstream commit feadc4b6cf42a53a8a93c918a569a0b7e62bd350 ]
Currently, nla_put_iflink() doesn't put the IFLA_LINK attribute when
iflink == ifindex.
In some cases, a device can be created in a different netns with the
same ifindex as its parent. That device will not dump its IFLA_LINK
attribute, which can confuse some userspace software that expects it.
For example, if the last ifindex created in init_net and foo are both
8, these commands will trigger the issue:
ip link add parent type dummy # ifindex 9
ip link add link parent netns foo type macvlan # ifindex 9 in ns foo
So, in case a device puts the IFLA_LINK_NETNSID attribute in a dump,
always put the IFLA_LINK attribute as well.
Thanks to Dan Winship for analyzing the original OpenShift bug down to
the missing netlink attribute.
v2: change Fixes tag, it's been here forever, as Nicolas Dichtel said
add Nicolas' ack
v3: change Fixes tag
fix subject typo, spotted by Edward Cree
Analyzed-by: Dan Winship <[email protected]>
Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Sabrina Dubroca <[email protected]>
Acked-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/rtnetlink.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1496,14 +1496,15 @@ static int put_master_ifindex(struct sk_
return ret;
}
-static int nla_put_iflink(struct sk_buff *skb, const struct net_device *dev)
+static int nla_put_iflink(struct sk_buff *skb, const struct net_device *dev,
+ bool force)
{
int ifindex = dev_get_iflink(dev);
- if (dev->ifindex == ifindex)
- return 0;
+ if (force || dev->ifindex != ifindex)
+ return nla_put_u32(skb, IFLA_LINK, ifindex);
- return nla_put_u32(skb, IFLA_LINK, ifindex);
+ return 0;
}
static noinline_for_stack int nla_put_ifalias(struct sk_buff *skb,
@@ -1520,6 +1521,8 @@ static int rtnl_fill_link_netnsid(struct
const struct net_device *dev,
struct net *src_net)
{
+ bool put_iflink = false;
+
if (dev->rtnl_link_ops && dev->rtnl_link_ops->get_link_net) {
struct net *link_net = dev->rtnl_link_ops->get_link_net(dev);
@@ -1528,10 +1531,12 @@ static int rtnl_fill_link_netnsid(struct
if (nla_put_s32(skb, IFLA_LINK_NETNSID, id))
return -EMSGSIZE;
+
+ put_iflink = true;
}
}
- return 0;
+ return nla_put_iflink(skb, dev, put_iflink);
}
static int rtnl_fill_link_af(struct sk_buff *skb,
@@ -1617,7 +1622,6 @@ static int rtnl_fill_ifinfo(struct sk_bu
#ifdef CONFIG_RPS
nla_put_u32(skb, IFLA_NUM_RX_QUEUES, dev->num_rx_queues) ||
#endif
- nla_put_iflink(skb, dev) ||
put_master_ifindex(skb, dev) ||
nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) ||
(dev->qdisc &&
From: Yifeng Li <[email protected]>
commit 4ed7d2ccb7684510ec5f7a8f7ef534bc6a3d55b2 upstream.
Loongson MIPS netbooks use 1024x600 LCD panels, which is the original
target platform of this driver, but nearly all old x86 laptops have
1024x768. Lighting 768 panels using 600's timings would partially
garble the display. Since it's not possible to distinguish them reliably,
we change the default to 768, but keep 600 as-is on MIPS.
Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD
panel, this driver would probably garbled those display. As we don't
have one for testing, the original behavior of the driver is kept as-is,
but the problem has been documented is the comments.
Signed-off-by: Yifeng Li <[email protected]>
Tested-by: Sudip Mukherjee <[email protected]>
Cc: Teddy Wang <[email protected]>
Cc: <[email protected]> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712.h | 7 +++--
drivers/video/fbdev/sm712fb.c | 53 +++++++++++++++++++++++++++++++-----------
2 files changed, 44 insertions(+), 16 deletions(-)
--- a/drivers/video/fbdev/sm712.h
+++ b/drivers/video/fbdev/sm712.h
@@ -15,9 +15,10 @@
#define FB_ACCEL_SMI_LYNX 88
-#define SCREEN_X_RES 1024
-#define SCREEN_Y_RES 600
-#define SCREEN_BPP 16
+#define SCREEN_X_RES 1024
+#define SCREEN_Y_RES_PC 768
+#define SCREEN_Y_RES_NETBOOK 600
+#define SCREEN_BPP 16
#define dac_reg (0x3c8)
#define dac_val (0x3c9)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1463,6 +1463,43 @@ static u_long sm7xx_vram_probe(struct sm
return 0; /* unknown hardware */
}
+static void sm7xx_resolution_probe(struct smtcfb_info *sfb)
+{
+ /* get mode parameter from smtc_scr_info */
+ if (smtc_scr_info.lfb_width != 0) {
+ sfb->fb->var.xres = smtc_scr_info.lfb_width;
+ sfb->fb->var.yres = smtc_scr_info.lfb_height;
+ sfb->fb->var.bits_per_pixel = smtc_scr_info.lfb_depth;
+ goto final;
+ }
+
+ /*
+ * No parameter, default resolution is 1024x768-16.
+ *
+ * FIXME: earlier laptops, such as IBM Thinkpad 240X, has a 800x600
+ * panel, also see the comments about Thinkpad 240X above.
+ */
+ sfb->fb->var.xres = SCREEN_X_RES;
+ sfb->fb->var.yres = SCREEN_Y_RES_PC;
+ sfb->fb->var.bits_per_pixel = SCREEN_BPP;
+
+#ifdef CONFIG_MIPS
+ /*
+ * Loongson MIPS netbooks use 1024x600 LCD panels, which is the original
+ * target platform of this driver, but nearly all old x86 laptops have
+ * 1024x768. Lighting 768 panels using 600's timings would partially
+ * garble the display, so we don't want that. But it's not possible to
+ * distinguish them reliably.
+ *
+ * So we change the default to 768, but keep 600 as-is on MIPS.
+ */
+ sfb->fb->var.yres = SCREEN_Y_RES_NETBOOK;
+#endif
+
+final:
+ big_pixel_depth(sfb->fb->var.bits_per_pixel, smtc_scr_info.lfb_depth);
+}
+
static int smtcfb_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -1508,19 +1545,6 @@ static int smtcfb_pci_probe(struct pci_d
sm7xx_init_hw();
- /* get mode parameter from smtc_scr_info */
- if (smtc_scr_info.lfb_width != 0) {
- sfb->fb->var.xres = smtc_scr_info.lfb_width;
- sfb->fb->var.yres = smtc_scr_info.lfb_height;
- sfb->fb->var.bits_per_pixel = smtc_scr_info.lfb_depth;
- } else {
- /* default resolution 1024x600 16bit mode */
- sfb->fb->var.xres = SCREEN_X_RES;
- sfb->fb->var.yres = SCREEN_Y_RES;
- sfb->fb->var.bits_per_pixel = SCREEN_BPP;
- }
-
- big_pixel_depth(sfb->fb->var.bits_per_pixel, smtc_scr_info.lfb_depth);
/* Map address and memory detection */
mmio_base = pci_resource_start(pdev, 0);
pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chip_rev_id);
@@ -1582,6 +1606,9 @@ static int smtcfb_pci_probe(struct pci_d
goto failed_fb;
}
+ /* probe and decide resolution */
+ sm7xx_resolution_probe(sfb);
+
/* can support 32 bpp */
if (sfb->fb->var.bits_per_pixel == 15)
sfb->fb->var.bits_per_pixel = 16;
From: Jonas Karlman <[email protected]>
commit fb903392131a324a243c7731389277db1cd9f8df upstream.
This patch fixes definition of several clock gate and select register
that is wrong for rk3328 referring to the TRM and vendor kernel.
Also use correct number of softrst registers.
Fix clock definition for:
- clk_crypto
- aclk_h265
- pclk_h265
- aclk_h264
- hclk_h264
- aclk_axisram
- aclk_gmac
- aclk_usb3otg
Fixes: fe3511ad8a1c ("clk: rockchip: add clock controller for rk3328")
Cc: [email protected]
Signed-off-by: Jonas Karlman <[email protected]>
Tested-by: Peter Geis <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/rockchip/clk-rk3328.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/clk/rockchip/clk-rk3328.c
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -458,7 +458,7 @@ static struct rockchip_clk_branch rk3328
RK3328_CLKSEL_CON(35), 15, 1, MFLAGS, 8, 7, DFLAGS,
RK3328_CLKGATE_CON(2), 12, GFLAGS),
COMPOSITE(SCLK_CRYPTO, "clk_crypto", mux_2plls_p, 0,
- RK3328_CLKSEL_CON(20), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKSEL_CON(20), 7, 1, MFLAGS, 0, 5, DFLAGS,
RK3328_CLKGATE_CON(2), 4, GFLAGS),
COMPOSITE_NOMUX(SCLK_TSADC, "clk_tsadc", "clk_24m", 0,
RK3328_CLKSEL_CON(22), 0, 10, DFLAGS,
@@ -550,15 +550,15 @@ static struct rockchip_clk_branch rk3328
GATE(0, "hclk_rkvenc_niu", "hclk_rkvenc", 0,
RK3328_CLKGATE_CON(25), 1, GFLAGS),
GATE(ACLK_H265, "aclk_h265", "aclk_rkvenc", 0,
- RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ RK3328_CLKGATE_CON(25), 2, GFLAGS),
GATE(PCLK_H265, "pclk_h265", "hclk_rkvenc", 0,
- RK3328_CLKGATE_CON(25), 1, GFLAGS),
+ RK3328_CLKGATE_CON(25), 3, GFLAGS),
GATE(ACLK_H264, "aclk_h264", "aclk_rkvenc", 0,
- RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ RK3328_CLKGATE_CON(25), 4, GFLAGS),
GATE(HCLK_H264, "hclk_h264", "hclk_rkvenc", 0,
- RK3328_CLKGATE_CON(25), 1, GFLAGS),
+ RK3328_CLKGATE_CON(25), 5, GFLAGS),
GATE(ACLK_AXISRAM, "aclk_axisram", "aclk_rkvenc", CLK_IGNORE_UNUSED,
- RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ RK3328_CLKGATE_CON(25), 6, GFLAGS),
COMPOSITE(SCLK_VENC_CORE, "sclk_venc_core", mux_4plls_p, 0,
RK3328_CLKSEL_CON(51), 14, 2, MFLAGS, 8, 5, DFLAGS,
@@ -663,7 +663,7 @@ static struct rockchip_clk_branch rk3328
/* PD_GMAC */
COMPOSITE(ACLK_GMAC, "aclk_gmac", mux_2plls_hdmiphy_p, 0,
- RK3328_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKSEL_CON(25), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3328_CLKGATE_CON(3), 2, GFLAGS),
COMPOSITE_NOMUX(PCLK_GMAC, "pclk_gmac", "aclk_gmac", 0,
RK3328_CLKSEL_CON(25), 8, 3, DFLAGS,
@@ -733,7 +733,7 @@ static struct rockchip_clk_branch rk3328
/* PD_PERI */
GATE(0, "aclk_peri_noc", "aclk_peri", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(19), 11, GFLAGS),
- GATE(ACLK_USB3OTG, "aclk_usb3otg", "aclk_peri", 0, RK3328_CLKGATE_CON(19), 4, GFLAGS),
+ GATE(ACLK_USB3OTG, "aclk_usb3otg", "aclk_peri", 0, RK3328_CLKGATE_CON(19), 14, GFLAGS),
GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 0, GFLAGS),
GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 1, GFLAGS),
@@ -913,7 +913,7 @@ static void __init rk3328_clk_init(struc
&rk3328_cpuclk_data, rk3328_cpuclk_rates,
ARRAY_SIZE(rk3328_cpuclk_rates));
- rockchip_register_softrst(np, 11, reg_base + RK3328_SOFTRST_CON(0),
+ rockchip_register_softrst(np, 12, reg_base + RK3328_SOFTRST_CON(0),
ROCKCHIP_SOFTRST_HIWORD_MASK);
rockchip_register_restart_notifier(ctx, RK3328_GLB_SRST_FST, NULL);
From: Yufen Yu <[email protected]>
commit ee37e62191a59d253fc916b9fc763deb777211e2 upstream.
When doing re-add, we need to ensure rdev->mddev->pers is not NULL,
which can avoid potential NULL pointer derefence in fallowing
add_bound_rdev().
Fixes: a6da4ef85cef ("md: re-add a failed disk")
Cc: Xiao Ni <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: <[email protected]> # 4.4+
Reviewed-by: NeilBrown <[email protected]>
Signed-off-by: Yufen Yu <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2860,8 +2860,10 @@ state_store(struct md_rdev *rdev, const
err = 0;
}
} else if (cmd_match(buf, "re-add")) {
- if (test_bit(Faulty, &rdev->flags) && (rdev->raid_disk == -1) &&
- rdev->saved_raid_disk >= 0) {
+ if (!rdev->mddev->pers)
+ err = -EINVAL;
+ else if (test_bit(Faulty, &rdev->flags) && (rdev->raid_disk == -1) &&
+ rdev->saved_raid_disk >= 0) {
/* clear_bit is performed _after_ all the devices
* have their local Faulty bit cleared. If any writes
* happen in the meantime in the local node, they
From: Alexander Shishkin <[email protected]>
commit 4e0eaf239fb33ebc671303e2b736fa043462e2f4 upstream.
Currently, the pages that are allocated for the single mode of MSC are not
mapped into the device's dma space and the code is incorrectly using
*_to_phys() in place of a dma address. This fails with IOMMU enabled and
is otherwise bad practice.
Fix the single mode buffer allocation to map the pages into the device's
DMA space.
Signed-off-by: Alexander Shishkin <[email protected]>
Fixes: ba82664c134e ("intel_th: Add Memory Storage Unit driver")
Cc: [email protected] # v4.4+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/msu.c | 35 ++++++++++++++++++++++++++++++++---
1 file changed, 32 insertions(+), 3 deletions(-)
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -84,6 +84,7 @@ struct msc_iter {
* @reg_base: register window base address
* @thdev: intel_th_device pointer
* @win_list: list of windows in multiblock mode
+ * @single_sgt: single mode buffer
* @nr_pages: total number of pages allocated for this buffer
* @single_sz: amount of data in single mode
* @single_wrap: single mode wrap occurred
@@ -104,6 +105,7 @@ struct msc {
struct intel_th_device *thdev;
struct list_head win_list;
+ struct sg_table single_sgt;
unsigned long nr_pages;
unsigned long single_sz;
unsigned int single_wrap : 1;
@@ -617,22 +619,45 @@ static void intel_th_msc_deactivate(stru
*/
static int msc_buffer_contig_alloc(struct msc *msc, unsigned long size)
{
+ unsigned long nr_pages = size >> PAGE_SHIFT;
unsigned int order = get_order(size);
struct page *page;
+ int ret;
if (!size)
return 0;
+ ret = sg_alloc_table(&msc->single_sgt, 1, GFP_KERNEL);
+ if (ret)
+ goto err_out;
+
+ ret = -ENOMEM;
page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
if (!page)
- return -ENOMEM;
+ goto err_free_sgt;
split_page(page, order);
- msc->nr_pages = size >> PAGE_SHIFT;
+ sg_set_buf(msc->single_sgt.sgl, page_address(page), size);
+
+ ret = dma_map_sg(msc_dev(msc)->parent->parent, msc->single_sgt.sgl, 1,
+ DMA_FROM_DEVICE);
+ if (ret < 0)
+ goto err_free_pages;
+
+ msc->nr_pages = nr_pages;
msc->base = page_address(page);
- msc->base_addr = page_to_phys(page);
+ msc->base_addr = sg_dma_address(msc->single_sgt.sgl);
return 0;
+
+err_free_pages:
+ __free_pages(page, order);
+
+err_free_sgt:
+ sg_free_table(&msc->single_sgt);
+
+err_out:
+ return ret;
}
/**
@@ -643,6 +668,10 @@ static void msc_buffer_contig_free(struc
{
unsigned long off;
+ dma_unmap_sg(msc_dev(msc)->parent->parent, msc->single_sgt.sgl,
+ 1, DMA_FROM_DEVICE);
+ sg_free_table(&msc->single_sgt);
+
for (off = 0; off < msc->nr_pages << PAGE_SHIFT; off += PAGE_SIZE) {
struct page *page = virt_to_page(msc->base + off);
From: Steve Longerbeam <[email protected]>
commit 904371f90b2c0c749a5ab75478c129a4682ac3d8 upstream.
On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.
However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.
Fixes: bf3cfaa712e5c ("media: staging/imx: get CSI bus type from nearest
upstream entity")
Signed-off-by: Steve Longerbeam <[email protected]>
Cc: [email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/media/imx/imx-media-csi.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -153,9 +153,10 @@ static inline bool requires_passthrough(
/*
* Parses the fwnode endpoint from the source pad of the entity
* connected to this CSI. This will either be the entity directly
- * upstream from the CSI-2 receiver, or directly upstream from the
- * video mux. The endpoint is needed to determine the bus type and
- * bus config coming into the CSI.
+ * upstream from the CSI-2 receiver, directly upstream from the
+ * video mux, or directly upstream from the CSI itself. The endpoint
+ * is needed to determine the bus type and bus config coming into
+ * the CSI.
*/
static int csi_get_upstream_endpoint(struct csi_priv *priv,
struct v4l2_fwnode_endpoint *ep)
@@ -168,7 +169,8 @@ static int csi_get_upstream_endpoint(str
if (!priv->src_sd)
return -EPIPE;
- src = &priv->src_sd->entity;
+ sd = priv->src_sd;
+ src = &sd->entity;
if (src->function == MEDIA_ENT_F_VID_MUX) {
/*
@@ -182,6 +184,14 @@ static int csi_get_upstream_endpoint(str
src = &sd->entity;
}
+ /*
+ * If the source is neither the video mux nor the CSI-2 receiver,
+ * get the source pad directly upstream from CSI itself.
+ */
+ if (src->function != MEDIA_ENT_F_VID_MUX &&
+ sd->grp_id != IMX_MEDIA_GRP_ID_CSI2)
+ src = &priv->sd.entity;
+
/* get source pad of entity directly upstream from src */
pad = imx_media_find_upstream_pad(priv->md, src, 0);
if (IS_ERR(pad))
From: Daniele Palmas <[email protected]>
[ Upstream commit b4e467c82f8c12af78b6f6fa5730cb7dea7af1b4 ]
Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.
Signed-off-by: Daniele Palmas <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1240,6 +1240,8 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */
{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */
{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)}, /* Telewell TW-3G HSPA+ */
From: Saeed Mahameed <[email protected]>
[ Upstream commit 8f0916c6dc5cd5e3bc52416fa2a9ff4075080180 ]
ethtool user spaces needs to know ring count via ETHTOOL_GRXRINGS when
executing (ethtool -x) which is retrieved via ethtool get_rxnfc callback,
in mlx5 this callback is disabled when CONFIG_MLX5_EN_RXNFC=n.
This patch allows only ETHTOOL_GRXRINGS command on mlx5e_get_rxnfc() when
CONFIG_MLX5_EN_RXNFC is disabled, so ethtool -x will continue working.
Fixes: fe6d86b3c316 ("net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfc")
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1609,6 +1609,22 @@ static int mlx5e_flash_device(struct net
return mlx5e_ethtool_flash_device(priv, flash);
}
+#ifndef CONFIG_MLX5_EN_RXNFC
+/* When CONFIG_MLX5_EN_RXNFC=n we only support ETHTOOL_GRXRINGS
+ * otherwise this function will be defined from en_fs_ethtool.c
+ */
+static int mlx5e_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info, u32 *rule_locs)
+{
+ struct mlx5e_priv *priv = netdev_priv(dev);
+
+ if (info->cmd != ETHTOOL_GRXRINGS)
+ return -EOPNOTSUPP;
+ /* ring_count is needed by ethtool -x */
+ info->data = priv->channels.params.num_channels;
+ return 0;
+}
+#endif
+
const struct ethtool_ops mlx5e_ethtool_ops = {
.get_drvinfo = mlx5e_get_drvinfo,
.get_link = ethtool_op_get_link,
@@ -1627,8 +1643,8 @@ const struct ethtool_ops mlx5e_ethtool_o
.get_rxfh_indir_size = mlx5e_get_rxfh_indir_size,
.get_rxfh = mlx5e_get_rxfh,
.set_rxfh = mlx5e_set_rxfh,
-#ifdef CONFIG_MLX5_EN_RXNFC
.get_rxnfc = mlx5e_get_rxnfc,
+#ifdef CONFIG_MLX5_EN_RXNFC
.set_rxnfc = mlx5e_set_rxnfc,
#endif
.flash_device = mlx5e_flash_device,
From: Florian Fainelli <[email protected]>
[ Upstream commit 0fe9f173d6cda95874edeb413b1fa9907b5ae830 ]
Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y,
CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a
functional state where the mock-up driver is registered. Turns out that
we are not descending into drivers/net/dsa/ unconditionally, and we
won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up
mdio device registration.
Reported-by: Jiri Pirko <[email protected]>
Fixes: 40013ff20b1b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Tested-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_CAN) += can/
-obj-$(CONFIG_NET_DSA) += dsa/
+obj-y += dsa/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
obj-$(CONFIG_HIPPI) += hippi/
From: Mikulas Patocka <[email protected]>
commit 6b11f9d8433b471fdd3ebed232b43a4b723be6ff upstream.
If a framebuffer device is used as a console, the rendering calls
(copyarea, fillrect, imageblit) may be done with the console spinlock
held. On udlfb, these function call dlfb_handle_damage that takes a
blocking semaphore before acquiring an URB.
In order to fix the bug, this patch changes the calls copyarea, fillrect
and imageblit to offload USB work to a workqueue.
A side effect of this patch is 3x improvement in console scrolling speed
because the device doesn't have to be updated after each copyarea call.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: Bernie Thompson <[email protected]>
Cc: Ladislav Michl <[email protected]>
Cc: <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/udlfb.c | 56 +++++++++++++++++++++++++++++++++++++++++---
include/video/udlfb.h | 6 ++++
2 files changed, 59 insertions(+), 3 deletions(-)
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -657,6 +657,50 @@ error:
return 0;
}
+static void dlfb_init_damage(struct dlfb_data *dlfb)
+{
+ dlfb->damage_x = INT_MAX;
+ dlfb->damage_x2 = 0;
+ dlfb->damage_y = INT_MAX;
+ dlfb->damage_y2 = 0;
+}
+
+static void dlfb_damage_work(struct work_struct *w)
+{
+ struct dlfb_data *dlfb = container_of(w, struct dlfb_data, damage_work);
+ int x, x2, y, y2;
+
+ spin_lock_irq(&dlfb->damage_lock);
+ x = dlfb->damage_x;
+ x2 = dlfb->damage_x2;
+ y = dlfb->damage_y;
+ y2 = dlfb->damage_y2;
+ dlfb_init_damage(dlfb);
+ spin_unlock_irq(&dlfb->damage_lock);
+
+ if (x < x2 && y < y2)
+ dlfb_handle_damage(dlfb, x, y, x2 - x, y2 - y);
+}
+
+static void dlfb_offload_damage(struct dlfb_data *dlfb, int x, int y, int width, int height)
+{
+ unsigned long flags;
+ int x2 = x + width;
+ int y2 = y + height;
+
+ if (x >= x2 || y >= y2)
+ return;
+
+ spin_lock_irqsave(&dlfb->damage_lock, flags);
+ dlfb->damage_x = min(x, dlfb->damage_x);
+ dlfb->damage_x2 = max(x2, dlfb->damage_x2);
+ dlfb->damage_y = min(y, dlfb->damage_y);
+ dlfb->damage_y2 = max(y2, dlfb->damage_y2);
+ spin_unlock_irqrestore(&dlfb->damage_lock, flags);
+
+ schedule_work(&dlfb->damage_work);
+}
+
/*
* Path triggered by usermode clients who write to filesystem
* e.g. cat filename > /dev/fb1
@@ -693,7 +737,7 @@ static void dlfb_ops_copyarea(struct fb_
sys_copyarea(info, area);
- dlfb_handle_damage(dlfb, area->dx, area->dy,
+ dlfb_offload_damage(dlfb, area->dx, area->dy,
area->width, area->height);
}
@@ -704,7 +748,7 @@ static void dlfb_ops_imageblit(struct fb
sys_imageblit(info, image);
- dlfb_handle_damage(dlfb, image->dx, image->dy,
+ dlfb_offload_damage(dlfb, image->dx, image->dy,
image->width, image->height);
}
@@ -715,7 +759,7 @@ static void dlfb_ops_fillrect(struct fb_
sys_fillrect(info, rect);
- dlfb_handle_damage(dlfb, rect->dx, rect->dy, rect->width,
+ dlfb_offload_damage(dlfb, rect->dx, rect->dy, rect->width,
rect->height);
}
@@ -940,6 +984,8 @@ static void dlfb_ops_destroy(struct fb_i
{
struct dlfb_data *dlfb = info->par;
+ cancel_work_sync(&dlfb->damage_work);
+
if (info->cmap.len != 0)
fb_dealloc_cmap(&info->cmap);
if (info->monspecs.modedb)
@@ -1636,6 +1682,10 @@ static int dlfb_usb_probe(struct usb_int
dlfb->ops = dlfb_ops;
info->fbops = &dlfb->ops;
+ dlfb_init_damage(dlfb);
+ spin_lock_init(&dlfb->damage_lock);
+ INIT_WORK(&dlfb->damage_work, dlfb_damage_work);
+
INIT_LIST_HEAD(&info->modelist);
if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -48,6 +48,12 @@ struct dlfb_data {
int base8;
u32 pseudo_palette[256];
int blank_mode; /*one of FB_BLANK_ */
+ int damage_x;
+ int damage_y;
+ int damage_x2;
+ int damage_y2;
+ spinlock_t damage_lock;
+ struct work_struct damage_work;
struct fb_ops ops;
/* blit-only rendering path metrics, exposed through sysfs */
atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
From: Helge Deller <[email protected]>
commit bdca5d64ee92abeacd6dada0bc6f6f8e6350dd67 upstream.
The LEVEL define clashed with the DRBD code.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Cc: <[email protected]> # v4.14+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/boot/compressed/head.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/parisc/boot/compressed/head.S
+++ b/arch/parisc/boot/compressed/head.S
@@ -22,7 +22,7 @@
__HEAD
ENTRY(startup)
- .level LEVEL
+ .level PA_ASM_LEVEL
#define PSW_W_SM 0x200
#define PSW_W_BIT 36
@@ -63,7 +63,7 @@ $bss_loop:
load32 BOOTADDR(decompress_kernel),%r3
#ifdef CONFIG_64BIT
- .level LEVEL
+ .level PA_ASM_LEVEL
ssm PSW_W_SM, %r0 /* set W-bit */
depdi 0, 31, 32, %r3
#endif
@@ -72,7 +72,7 @@ $bss_loop:
startup_continue:
#ifdef CONFIG_64BIT
- .level LEVEL
+ .level PA_ASM_LEVEL
rsm PSW_W_SM, %r0 /* clear W-bit */
#endif
From: NeilBrown <[email protected]>
commit 4bc034d35377196c854236133b07730a777c4aba upstream.
This reverts commit 5a409b4f56d50b212334f338cb8465d65550cd85.
This patch has two problems.
1/ it make multiple calls to submit_bio() from inside a make_request_fn.
The bios thus submitted will be queued on current->bio_list and not
submitted immediately. As the bios are allocated from a mempool,
this can theoretically result in a deadlock - all the pool of requests
could be in various ->bio_list queues and a subsequent mempool_alloc
could block waiting for one of them to be released.
2/ It aims to handle a case when there are many concurrent flush requests.
It handles this by submitting many requests in parallel - all of which
are identical and so most of which do nothing useful.
It would be more efficient to just send one lower-level request, but
allow that to satisfy multiple upper-level requests.
Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios")
Cc: <[email protected]> # v4.19+
Tested-by: Xiao Ni <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 163 ++++++++++++++++++--------------------------------------
drivers/md/md.h | 22 ++-----
2 files changed, 62 insertions(+), 123 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -132,24 +132,6 @@ static inline int speed_max(struct mddev
mddev->sync_speed_max : sysctl_speed_limit_max;
}
-static void * flush_info_alloc(gfp_t gfp_flags, void *data)
-{
- return kzalloc(sizeof(struct flush_info), gfp_flags);
-}
-static void flush_info_free(void *flush_info, void *data)
-{
- kfree(flush_info);
-}
-
-static void * flush_bio_alloc(gfp_t gfp_flags, void *data)
-{
- return kzalloc(sizeof(struct flush_bio), gfp_flags);
-}
-static void flush_bio_free(void *flush_bio, void *data)
-{
- kfree(flush_bio);
-}
-
static struct ctl_table_header *raid_table_header;
static struct ctl_table raid_table[] = {
@@ -429,54 +411,30 @@ static int md_congested(void *data, int
/*
* Generic flush handling for md
*/
-static void submit_flushes(struct work_struct *ws)
-{
- struct flush_info *fi = container_of(ws, struct flush_info, flush_work);
- struct mddev *mddev = fi->mddev;
- struct bio *bio = fi->bio;
-
- bio->bi_opf &= ~REQ_PREFLUSH;
- md_handle_request(mddev, bio);
-
- mempool_free(fi, mddev->flush_pool);
-}
-static void md_end_flush(struct bio *fbio)
+static void md_end_flush(struct bio *bio)
{
- struct flush_bio *fb = fbio->bi_private;
- struct md_rdev *rdev = fb->rdev;
- struct flush_info *fi = fb->fi;
- struct bio *bio = fi->bio;
- struct mddev *mddev = fi->mddev;
+ struct md_rdev *rdev = bio->bi_private;
+ struct mddev *mddev = rdev->mddev;
rdev_dec_pending(rdev, mddev);
- if (atomic_dec_and_test(&fi->flush_pending)) {
- if (bio->bi_iter.bi_size == 0) {
- /* an empty barrier - all done */
- bio_endio(bio);
- mempool_free(fi, mddev->flush_pool);
- } else {
- INIT_WORK(&fi->flush_work, submit_flushes);
- queue_work(md_wq, &fi->flush_work);
- }
+ if (atomic_dec_and_test(&mddev->flush_pending)) {
+ /* The pre-request flush has finished */
+ queue_work(md_wq, &mddev->flush_work);
}
-
- mempool_free(fb, mddev->flush_bio_pool);
- bio_put(fbio);
+ bio_put(bio);
}
-void md_flush_request(struct mddev *mddev, struct bio *bio)
+static void md_submit_flush_data(struct work_struct *ws);
+
+static void submit_flushes(struct work_struct *ws)
{
+ struct mddev *mddev = container_of(ws, struct mddev, flush_work);
struct md_rdev *rdev;
- struct flush_info *fi;
-
- fi = mempool_alloc(mddev->flush_pool, GFP_NOIO);
-
- fi->bio = bio;
- fi->mddev = mddev;
- atomic_set(&fi->flush_pending, 1);
+ INIT_WORK(&mddev->flush_work, md_submit_flush_data);
+ atomic_set(&mddev->flush_pending, 1);
rcu_read_lock();
rdev_for_each_rcu(rdev, mddev)
if (rdev->raid_disk >= 0 &&
@@ -486,40 +444,59 @@ void md_flush_request(struct mddev *mdde
* we reclaim rcu_read_lock
*/
struct bio *bi;
- struct flush_bio *fb;
atomic_inc(&rdev->nr_pending);
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
-
- fb = mempool_alloc(mddev->flush_bio_pool, GFP_NOIO);
- fb->fi = fi;
- fb->rdev = rdev;
-
bi = bio_alloc_mddev(GFP_NOIO, 0, mddev);
- bio_set_dev(bi, rdev->bdev);
bi->bi_end_io = md_end_flush;
- bi->bi_private = fb;
+ bi->bi_private = rdev;
+ bio_set_dev(bi, rdev->bdev);
bi->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH;
-
- atomic_inc(&fi->flush_pending);
+ atomic_inc(&mddev->flush_pending);
submit_bio(bi);
-
rcu_read_lock();
rdev_dec_pending(rdev, mddev);
}
rcu_read_unlock();
+ if (atomic_dec_and_test(&mddev->flush_pending))
+ queue_work(md_wq, &mddev->flush_work);
+}
- if (atomic_dec_and_test(&fi->flush_pending)) {
- if (bio->bi_iter.bi_size == 0) {
- /* an empty barrier - all done */
- bio_endio(bio);
- mempool_free(fi, mddev->flush_pool);
- } else {
- INIT_WORK(&fi->flush_work, submit_flushes);
- queue_work(md_wq, &fi->flush_work);
- }
+static void md_submit_flush_data(struct work_struct *ws)
+{
+ struct mddev *mddev = container_of(ws, struct mddev, flush_work);
+ struct bio *bio = mddev->flush_bio;
+
+ /*
+ * must reset flush_bio before calling into md_handle_request to avoid a
+ * deadlock, because other bios passed md_handle_request suspend check
+ * could wait for this and below md_handle_request could wait for those
+ * bios because of suspend check
+ */
+ mddev->flush_bio = NULL;
+ wake_up(&mddev->sb_wait);
+
+ if (bio->bi_iter.bi_size == 0) {
+ /* an empty barrier - all done */
+ bio_endio(bio);
+ } else {
+ bio->bi_opf &= ~REQ_PREFLUSH;
+ md_handle_request(mddev, bio);
}
}
+
+void md_flush_request(struct mddev *mddev, struct bio *bio)
+{
+ spin_lock_irq(&mddev->lock);
+ wait_event_lock_irq(mddev->sb_wait,
+ !mddev->flush_bio,
+ mddev->lock);
+ mddev->flush_bio = bio;
+ spin_unlock_irq(&mddev->lock);
+
+ INIT_WORK(&mddev->flush_work, submit_flushes);
+ queue_work(md_wq, &mddev->flush_work);
+}
EXPORT_SYMBOL(md_flush_request);
static inline struct mddev *mddev_get(struct mddev *mddev)
@@ -566,6 +543,7 @@ void mddev_init(struct mddev *mddev)
atomic_set(&mddev->openers, 0);
atomic_set(&mddev->active_io, 0);
spin_lock_init(&mddev->lock);
+ atomic_set(&mddev->flush_pending, 0);
init_waitqueue_head(&mddev->sb_wait);
init_waitqueue_head(&mddev->recovery_wait);
mddev->reshape_position = MaxSector;
@@ -5519,22 +5497,6 @@ int md_run(struct mddev *mddev)
if (err)
return err;
}
- if (mddev->flush_pool == NULL) {
- mddev->flush_pool = mempool_create(NR_FLUSH_INFOS, flush_info_alloc,
- flush_info_free, mddev);
- if (!mddev->flush_pool) {
- err = -ENOMEM;
- goto abort;
- }
- }
- if (mddev->flush_bio_pool == NULL) {
- mddev->flush_bio_pool = mempool_create(NR_FLUSH_BIOS, flush_bio_alloc,
- flush_bio_free, mddev);
- if (!mddev->flush_bio_pool) {
- err = -ENOMEM;
- goto abort;
- }
- }
spin_lock(&pers_lock);
pers = find_pers(mddev->level, mddev->clevel);
@@ -5694,15 +5656,8 @@ int md_run(struct mddev *mddev)
return 0;
abort:
- if (mddev->flush_bio_pool) {
- mempool_destroy(mddev->flush_bio_pool);
- mddev->flush_bio_pool = NULL;
- }
- if (mddev->flush_pool){
- mempool_destroy(mddev->flush_pool);
- mddev->flush_pool = NULL;
- }
-
+ bioset_exit(&mddev->bio_set);
+ bioset_exit(&mddev->sync_set);
return err;
}
EXPORT_SYMBOL_GPL(md_run);
@@ -5906,14 +5861,6 @@ static void __md_stop(struct mddev *mdde
mddev->to_remove = &md_redundancy_group;
module_put(pers->owner);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- if (mddev->flush_bio_pool) {
- mempool_destroy(mddev->flush_bio_pool);
- mddev->flush_bio_pool = NULL;
- }
- if (mddev->flush_pool) {
- mempool_destroy(mddev->flush_pool);
- mddev->flush_pool = NULL;
- }
}
void md_stop(struct mddev *mddev)
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -252,19 +252,6 @@ enum mddev_sb_flags {
MD_SB_NEED_REWRITE, /* metadata write needs to be repeated */
};
-#define NR_FLUSH_INFOS 8
-#define NR_FLUSH_BIOS 64
-struct flush_info {
- struct bio *bio;
- struct mddev *mddev;
- struct work_struct flush_work;
- atomic_t flush_pending;
-};
-struct flush_bio {
- struct flush_info *fi;
- struct md_rdev *rdev;
-};
-
struct mddev {
void *private;
struct md_personality *pers;
@@ -470,8 +457,13 @@ struct mddev {
* metadata and bitmap writes
*/
- mempool_t *flush_pool;
- mempool_t *flush_bio_pool;
+ /* Generic flush handling.
+ * The last to finish preflush schedules a worker to submit
+ * the rest of the request (without the REQ_PREFLUSH flag).
+ */
+ struct bio *flush_bio;
+ atomic_t flush_pending;
+ struct work_struct flush_work;
struct work_struct event_work; /* used by dm to report failure event */
void (*sync_super)(struct mddev *mddev, struct md_rdev *rdev);
struct md_cluster_info *cluster_info;
From: NeilBrown <[email protected]>
commit 2bc13b83e6298486371761de503faeffd15b7534 upstream.
Currently if many flush requests are submitted to an md device is quick
succession, they are serialized and can take a long to process them all.
We don't really need to call flush all those times - a single flush call
can satisfy all requests submitted before it started.
So keep track of when the current flush started and when it finished,
allow any pending flush that was requested before the flush started
to complete without waiting any more.
Test results from Xiao:
Test is done on a raid10 device which is created by 4 SSDs. The tool is
dbench.
1. The latest linux stable kernel
Operation Count AvgLat MaxLat
--------------------------------------------------
Deltree 768 10.509 78.305
Flush 2078376 0.013 10.094
Close 21787697 0.019 18.821
LockX 96580 0.007 3.184
Mkdir 384 0.008 0.062
Rename 1255883 0.191 23.534
ReadX 46495589 0.020 14.230
WriteX 14790591 7.123 60.706
Unlink 5989118 0.440 54.551
UnlockX 96580 0.005 2.736
FIND_FIRST 10393845 0.042 12.079
SET_FILE_INFORMATION 2415558 0.129 10.088
QUERY_FILE_INFORMATION 4711725 0.005 8.462
QUERY_PATH_INFORMATION 26883327 0.032 21.715
QUERY_FS_INFORMATION 4929409 0.010 8.238
NTCreateX 29660080 0.100 53.268
Throughput 1034.88 MB/sec (sync open) 128 clients 128 procs
max_latency=60.712 ms
2. With patch1 "Revert "MD: fix lock contention for flush bios""
Operation Count AvgLat MaxLat
--------------------------------------------------
Deltree 256 8.326 36.761
Flush 693291 3.974 180.269
Close 7266404 0.009 36.929
LockX 32160 0.006 0.840
Mkdir 128 0.008 0.021
Rename 418755 0.063 29.945
ReadX 15498708 0.007 7.216
WriteX 4932310 22.482 267.928
Unlink 1997557 0.109 47.553
UnlockX 32160 0.004 1.110
FIND_FIRST 3465791 0.036 7.320
SET_FILE_INFORMATION 805825 0.015 1.561
QUERY_FILE_INFORMATION 1570950 0.005 2.403
QUERY_PATH_INFORMATION 8965483 0.013 14.277
QUERY_FS_INFORMATION 1643626 0.009 3.314
NTCreateX 9892174 0.061 41.278
Throughput 345.009 MB/sec (sync open) 128 clients 128 procs
max_latency=267.939 m
3. With patch1 and patch2
Operation Count AvgLat MaxLat
--------------------------------------------------
Deltree 768 9.570 54.588
Flush 2061354 0.666 15.102
Close 21604811 0.012 25.697
LockX 95770 0.007 1.424
Mkdir 384 0.008 0.053
Rename 1245411 0.096 12.263
ReadX 46103198 0.011 12.116
WriteX 14667988 7.375 60.069
Unlink 5938936 0.173 30.905
UnlockX 95770 0.005 4.147
FIND_FIRST 10306407 0.041 11.715
SET_FILE_INFORMATION 2395987 0.048 7.640
QUERY_FILE_INFORMATION 4672371 0.005 9.291
QUERY_PATH_INFORMATION 26656735 0.018 19.719
QUERY_FS_INFORMATION 4887940 0.010 7.654
NTCreateX 29410811 0.059 28.551
Throughput 1026.21 MB/sec (sync open) 128 clients 128 procs
max_latency=60.075 ms
Cc: <[email protected]> # v4.19+
Tested-by: Xiao Ni <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 27 +++++++++++++++++++++++----
drivers/md/md.h | 3 +++
2 files changed, 26 insertions(+), 4 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -433,6 +433,7 @@ static void submit_flushes(struct work_s
struct mddev *mddev = container_of(ws, struct mddev, flush_work);
struct md_rdev *rdev;
+ mddev->start_flush = ktime_get_boottime();
INIT_WORK(&mddev->flush_work, md_submit_flush_data);
atomic_set(&mddev->flush_pending, 1);
rcu_read_lock();
@@ -473,6 +474,7 @@ static void md_submit_flush_data(struct
* could wait for this and below md_handle_request could wait for those
* bios because of suspend check
*/
+ mddev->last_flush = mddev->start_flush;
mddev->flush_bio = NULL;
wake_up(&mddev->sb_wait);
@@ -487,15 +489,32 @@ static void md_submit_flush_data(struct
void md_flush_request(struct mddev *mddev, struct bio *bio)
{
+ ktime_t start = ktime_get_boottime();
spin_lock_irq(&mddev->lock);
wait_event_lock_irq(mddev->sb_wait,
- !mddev->flush_bio,
+ !mddev->flush_bio ||
+ ktime_after(mddev->last_flush, start),
mddev->lock);
- mddev->flush_bio = bio;
+ if (!ktime_after(mddev->last_flush, start)) {
+ WARN_ON(mddev->flush_bio);
+ mddev->flush_bio = bio;
+ bio = NULL;
+ }
spin_unlock_irq(&mddev->lock);
- INIT_WORK(&mddev->flush_work, submit_flushes);
- queue_work(md_wq, &mddev->flush_work);
+ if (!bio) {
+ INIT_WORK(&mddev->flush_work, submit_flushes);
+ queue_work(md_wq, &mddev->flush_work);
+ } else {
+ /* flush was performed for some other bio while we waited. */
+ if (bio->bi_iter.bi_size == 0)
+ /* an empty barrier - all done */
+ bio_endio(bio);
+ else {
+ bio->bi_opf &= ~REQ_PREFLUSH;
+ mddev->pers->make_request(mddev, bio);
+ }
+ }
}
EXPORT_SYMBOL(md_flush_request);
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -463,6 +463,9 @@ struct mddev {
*/
struct bio *flush_bio;
atomic_t flush_pending;
+ ktime_t start_flush, last_flush; /* last_flush is when the last completed
+ * flush was started.
+ */
struct work_struct flush_work;
struct work_struct event_work; /* used by dm to report failure event */
void (*sync_super)(struct mddev *mddev, struct md_rdev *rdev);
stable-rc/linux-4.19.y boot: 125 boots: 0 failed, 112 passed with 13 offline (v4.19.45-115-g071ff9cc9849)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.45-115-g071ff9cc9849/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.45-115-g071ff9cc9849/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.45-115-g071ff9cc9849
Git Commit: 071ff9cc98498f489abc097471549b19933ba3e2
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 68 unique boards, 24 SoC families, 14 builds out of 206
Offline Platforms:
arm:
sama5_defconfig:
gcc-8
at91-sama5d4_xplained: 1 offline lab
multi_v7_defconfig:
gcc-8
alpine-db: 1 offline lab
at91-sama5d4_xplained: 1 offline lab
socfpga_cyclone5_de0_sockit: 1 offline lab
stih410-b2120: 1 offline lab
sun5i-r8-chip: 1 offline lab
tegra124-jetson-tk1: 1 offline lab
tegra_defconfig:
gcc-8
tegra124-jetson-tk1: 1 offline lab
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
bcm2835_defconfig:
gcc-8
bcm2835-rpi-b: 1 offline lab
arm64:
defconfig:
gcc-8
apq8016-sbc: 1 offline lab
juno-r2: 1 offline lab
mt7622-rfb1: 1 offline lab
---
For more info write to <[email protected]>
On Fri, 24 May 2019 at 00:44, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.46 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 25 May 2019 06:15:02 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.46-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 071ff9cc98498f489abc097471549b19933ba3e2
git describe: v4.19.45-115-g071ff9cc9849
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.45-115-g071ff9cc9849
No regressions (compared to build v4.19.45)
No fixes (compared to build v4.19.45)
Ran 23173 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 23/05/2019 20:04, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.46 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 25 May 2019 06:15:02 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.19:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.46-rc1-g071ff9c
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 5/23/19 1:04 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.46 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 25 May 2019 06:15:02 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Thu 2019-05-23 21:06:47, Greg Kroah-Hartman wrote:
> From: Song Liu <[email protected]>
>
> commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.
>
> This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.
>
> Cc: Dan Williams <[email protected]>
> Cc: Nigel Croxon <[email protected]>
> Cc: Xiao Ni <[email protected]>
> Signed-off-by: Song Liu <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
We normally reject patches without changelog, and this has none. Why
make exception here?
Pavel
>
> ---
> drivers/md/raid5.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> --- a/drivers/md/raid5.c
> +++ b/drivers/md/raid5.c
> @@ -4221,15 +4221,26 @@ static void handle_parity_checks6(struct
> case check_state_check_result:
> sh->check_state = check_state_idle;
>
> - if (s->failed > 1)
> - break;
> /* handle a successful check operation, if parity is correct
> * we are done. Otherwise update the mismatch count and repair
> * parity if !MD_RECOVERY_CHECK
> */
> if (sh->ops.zero_sum_result == 0) {
> - /* Any parity checked was correct */
> - set_bit(STRIPE_INSYNC, &sh->state);
> + /* both parities are correct */
> + if (!s->failed)
> + set_bit(STRIPE_INSYNC, &sh->state);
> + else {
> + /* in contrast to the raid5 case we can validate
> + * parity, but still have a failure to write
> + * back
> + */
> + sh->check_state = check_state_compute_result;
> + /* Returning at this point means that we may go
> + * off and bring p and/or q uptodate again so
> + * we make sure to check zero_sum_result again
> + * to verify if p or q need writeback
> + */
> + }
> } else {
> atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
> if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Sat, May 25, 2019 at 02:08:35PM +0200, Pavel Machek wrote:
> On Thu 2019-05-23 21:06:47, Greg Kroah-Hartman wrote:
> > From: Song Liu <[email protected]>
> >
> > commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.
> >
> > This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.
> >
> > Cc: Dan Williams <[email protected]>
> > Cc: Nigel Croxon <[email protected]>
> > Cc: Xiao Ni <[email protected]>
> > Signed-off-by: Song Liu <[email protected]>
> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
> We normally reject patches without changelog, and this has none. Why
> make exception here?
Why are you reviewing stable kernel patches as if there is anything you
can do about them at this point in time to change things like this?
These are all mirrors of what is in Linus's tree. If you object to the
original patch, that's fine, but please respond to the original patch,
not the stable kernel patches as there's nothing I can do about
changelog text at this late in the process.
thanks,
greg k-h
> On May 25, 2019, at 9:07 AM, Greg Kroah-Hartman <[email protected]> wrote:
>
> On Sat, May 25, 2019 at 02:08:35PM +0200, Pavel Machek wrote:
>> On Thu 2019-05-23 21:06:47, Greg Kroah-Hartman wrote:
>>> From: Song Liu <[email protected]>
>>>
>>> commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.
>>>
>>> This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.
>>>
>>> Cc: Dan Williams <[email protected]>
>>> Cc: Nigel Croxon <[email protected]>
>>> Cc: Xiao Ni <[email protected]>
>>> Signed-off-by: Song Liu <[email protected]>
>>> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>>
>> We normally reject patches without changelog, and this has none. Why
>> make exception here?
Hi Pavel,
It was all my fault not to include more information about the revert.
Thanks for highlighting this. I will be more careful with this in the
future.
Thanks,
Song
On Thu 2019-05-23 21:05:48, Greg Kroah-Hartman wrote:
> From: Dmitry Osipenko <[email protected]>
>
> commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.
>
> Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
> the TLB_FLUSH register differs from later Tegra generations that have 128
> ASID's.
>
> In a result the PTE's are now flushed correctly from TLB and this fixes
> problems with graphics (randomly failing tests) on Tegra30.
Three copies of same code... maybe its time to introduce helper function?
> --- a/drivers/iommu/tegra-smmu.c
> +++ b/drivers/iommu/tegra-smmu.c
> @@ -102,7 +102,6 @@ static inline u32 smmu_readl(struct tegr
> #define SMMU_TLB_FLUSH_VA_MATCH_ALL (0 << 0)
> #define SMMU_TLB_FLUSH_VA_MATCH_SECTION (2 << 0)
> #define SMMU_TLB_FLUSH_VA_MATCH_GROUP (3 << 0)
> -#define SMMU_TLB_FLUSH_ASID(x) (((x) & 0x7f) << 24)
> #define SMMU_TLB_FLUSH_VA_SECTION(addr) ((((addr) & 0xffc00000) >> 12) | \
> SMMU_TLB_FLUSH_VA_MATCH_SECTION)
> #define SMMU_TLB_FLUSH_VA_GROUP(addr) ((((addr) & 0xffffc000) >> 12) | \
> @@ -205,8 +204,12 @@ static inline void smmu_flush_tlb_asid(s
> {
> u32 value;
>
> - value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
> - SMMU_TLB_FLUSH_VA_MATCH_ALL;
> + if (smmu->soc->num_asids == 4)
> + value = (asid & 0x3) << 29;
> + else
> + value = (asid & 0x7f) << 24;
> +
> + value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_MATCH_ALL;
> smmu_writel(smmu, value, SMMU_TLB_FLUSH);
> }
>
> @@ -216,8 +219,12 @@ static inline void smmu_flush_tlb_sectio
> {
> u32 value;
>
> - value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
> - SMMU_TLB_FLUSH_VA_SECTION(iova);
> + if (smmu->soc->num_asids == 4)
> + value = (asid & 0x3) << 29;
> + else
> + value = (asid & 0x7f) << 24;
> +
> + value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_SECTION(iova);
> smmu_writel(smmu, value, SMMU_TLB_FLUSH);
> }
>
> @@ -227,8 +234,12 @@ static inline void smmu_flush_tlb_group(
> {
> u32 value;
>
> - value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
> - SMMU_TLB_FLUSH_VA_GROUP(iova);
> + if (smmu->soc->num_asids == 4)
> + value = (asid & 0x3) << 29;
> + else
> + value = (asid & 0x7f) << 24;
> +
> + value |= SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_VA_GROUP(iova);
> smmu_writel(smmu, value, SMMU_TLB_FLUSH);
> }
>
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
27.05.2019 18:46, Pavel Machek пишет:
> On Thu 2019-05-23 21:05:48, Greg Kroah-Hartman wrote:
>> From: Dmitry Osipenko <[email protected]>
>>
>> commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.
>>
>> Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
>> the TLB_FLUSH register differs from later Tegra generations that have 128
>> ASID's.
>>
>> In a result the PTE's are now flushed correctly from TLB and this fixes
>> problems with graphics (randomly failing tests) on Tegra30.
>
>
> Three copies of same code... maybe its time to introduce helper function?
>
Feel free to submit a patch if you think that something could be
improved. To me it is good as-is.
Hi!
> +++ b/include/uapi/linux/fuse.h
> @@ -219,10 +219,12 @@ struct fuse_file_lock {
> * FOPEN_DIRECT_IO: bypass page cache for this open file
> * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
> * FOPEN_NONSEEKABLE: the file is not seekable
> + * FOPEN_STREAM: the file is stream-like (no file position at all)
> */
> #define FOPEN_DIRECT_IO (1 << 0)
> #define FOPEN_KEEP_CACHE (1 << 1)
> #define FOPEN_NONSEEKABLE (1 << 2)
> +#define FOPEN_STREAM (1 << 4)
Interesting choice of constants. It is too late to change it now, but
was (1 << 3) meant here?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Tue, May 28, 2019 at 01:16:58PM +0200, Pavel Machek wrote:
> Hi!
>
> > +++ b/include/uapi/linux/fuse.h
> > @@ -219,10 +219,12 @@ struct fuse_file_lock {
> > * FOPEN_DIRECT_IO: bypass page cache for this open file
> > * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
> > * FOPEN_NONSEEKABLE: the file is not seekable
> > + * FOPEN_STREAM: the file is stream-like (no file position at all)
> > */
> > #define FOPEN_DIRECT_IO (1 << 0)
> > #define FOPEN_KEEP_CACHE (1 << 1)
> > #define FOPEN_NONSEEKABLE (1 << 2)
> > +#define FOPEN_STREAM (1 << 4)
>
> Interesting choice of constants. It is too late to change it now, but
> was (1 << 3) meant here?
It is just because this is 4.19 backport of original patch. There (on
5.2) it was like this:
--- a/include/uapi/linux/fuse.h
+++ b/include/uapi/linux/fuse.h
@@ -232,11 +232,13 @@ struct fuse_file_lock {
* FOPEN_KEEP_CACHE: don't invalidate the data cache on open
* FOPEN_NONSEEKABLE: the file is not seekable
* FOPEN_CACHE_DIR: allow caching this directory
+ * FOPEN_STREAM: the file is stream-like (no file position at all)
*/
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
#define FOPEN_NONSEEKABLE (1 << 2)
#define FOPEN_CACHE_DIR (1 << 3)
+#define FOPEN_STREAM (1 << 4)
i.e. (1 << 3) was already occupied by FOPEN_CACHE_DIR which was added by commit
6433b8998a21 (fuse: add FOPEN_CACHE_DIR)
Kirill