This is the start of the stable review cycle for the 4.14.169 release.
There are 46 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.169-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.169-rc1
Martin Schiller <[email protected]>
net/x25: fix nonblocking connect
Kadlecsik József <[email protected]>
netfilter: ipset: use bitmap infrastructure completely
Andy Shevchenko <[email protected]>
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
Andy Shevchenko <[email protected]>
md: Avoid namespace collision with bitmap API
Bo Wu <[email protected]>
scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
Hans Verkuil <[email protected]>
media: v4l2-ioctl.c: zero reserved fields for S/TRY_FMT
Wen Huang <[email protected]>
libertas: Fix two buffer overflows at parsing bss descriptor
Suzuki K Poulose <[email protected]>
coresight: tmc-etf: Do not call smp_processor_id from preemptible
Suzuki K Poulose <[email protected]>
coresight: etb10: Do not call smp_processor_id from preemptible
Masato Suzuki <[email protected]>
sd: Fix REQ_OP_ZONE_REPORT completion handling
Al Viro <[email protected]>
do_last(): fetch directory ->i_mode and ->i_uid before it's too late
Changbin Du <[email protected]>
tracing: xen: Ordered comparison of function pointers
Bart Van Assche <[email protected]>
scsi: RDMA/isert: Fix a recently introduced regression related to logout
Gilles Buloz <[email protected]>
hwmon: (nct7802) Fix voltage limits to wrong registers
Chuhong Yuan <[email protected]>
Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register
Johan Hovold <[email protected]>
Input: pegasus_notetaker - fix endpoint sanity check
Johan Hovold <[email protected]>
Input: aiptek - fix endpoint sanity check
Johan Hovold <[email protected]>
Input: gtco - fix endpoint sanity check
Johan Hovold <[email protected]>
Input: sur40 - fix interface sanity checks
Stephan Gerhold <[email protected]>
Input: pm8xxx-vib - fix handling of separate enable register
Jeremy Linton <[email protected]>
Documentation: Document arm64 kpti control
Michał Mirosław <[email protected]>
mmc: sdhci: fix minimum clock rate for v3 controller
Michał Mirosław <[email protected]>
mmc: tegra: fix SDR50 tuning override
Alex Sverdlin <[email protected]>
ARM: 8950/1: ftrace/recordmcount: filter relocation types
Hans Verkuil <[email protected]>
Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"
Johan Hovold <[email protected]>
Input: keyspan-remote - fix control-message timeouts
Guenter Roeck <[email protected]>
hwmon: (core) Do not use device managed functions for memory allocations
Dmitry Osipenko <[email protected]>
hwmon: (core) Fix double-free in __hwmon_device_register()
Linus Walleij <[email protected]>
hwmon: Deal with errors from the thermal subsystem
Luuk Paulussen <[email protected]>
hwmon: (adt7475) Make volt2reg return same reg as reg2volt input
Eric Dumazet <[email protected]>
net: rtnetlink: validate IFLA_MTU attribute in rtnl_create_link()
Wen Yang <[email protected]>
tcp_bbr: improve arithmetic division in bbr_update_bw()
James Hughes <[email protected]>
net: usb: lan78xx: Add .ndo_features_check
Jouni Hogander <[email protected]>
net-sysfs: Fix reference count leak
Jouni Hogander <[email protected]>
net-sysfs: Call dev_hold always in rx_queue_add_kobject
Jouni Hogander <[email protected]>
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
Eric Dumazet <[email protected]>
net-sysfs: fix netdev_queue_add_kobject() breakage
Jouni Hogander <[email protected]>
net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject
Cong Wang <[email protected]>
net_sched: fix datalen for ematch
William Dauchy <[email protected]>
net, ip_tunnel: fix namespaces move
William Dauchy <[email protected]>
net, ip6_tunnel: fix namespaces move
Michael Ellerman <[email protected]>
net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM
Yuki Taguchi <[email protected]>
ipv6: sr: remove SKB_GSO_IPXIP6 on End.D* actions
Eric Dumazet <[email protected]>
gtp: make sure only SOCK_DGRAM UDP sockets are accepted
Wenwen Wang <[email protected]>
firestream: fix memory leaks
Richard Palethorpe <[email protected]>
can, slip: Protect tty->disc_data in write_wakeup and close with RCU
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 6 ++
Makefile | 4 +-
drivers/atm/firestream.c | 3 +
drivers/hwmon/adt7475.c | 5 +-
drivers/hwmon/hwmon.c | 83 ++++++++++++++++---------
drivers/hwmon/nct7802.c | 4 +-
drivers/hwtracing/coresight/coresight-etb10.c | 4 +-
drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 +-
drivers/infiniband/ulp/isert/ib_isert.c | 12 ----
drivers/input/misc/keyspan_remote.c | 9 ++-
drivers/input/misc/pm8xxx-vibrator.c | 2 +-
drivers/input/rmi4/rmi_smbus.c | 2 +
drivers/input/tablet/aiptek.c | 6 +-
drivers/input/tablet/gtco.c | 10 +--
drivers/input/tablet/pegasus_notetaker.c | 2 +-
drivers/input/touchscreen/sun4i-ts.c | 6 +-
drivers/input/touchscreen/sur40.c | 2 +-
drivers/md/bitmap.c | 10 +--
drivers/md/bitmap.h | 2 +-
drivers/md/md-cluster.c | 6 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 24 +++----
drivers/mmc/host/sdhci-tegra.c | 2 +-
drivers/mmc/host/sdhci.c | 10 +--
drivers/net/can/slcan.c | 12 +++-
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 2 +
drivers/net/gtp.c | 10 +--
drivers/net/slip/slip.c | 12 +++-
drivers/net/usb/lan78xx.c | 15 +++++
drivers/net/wireless/marvell/libertas/cfg.c | 16 ++++-
drivers/scsi/scsi_transport_iscsi.c | 7 +++
drivers/scsi/sd.c | 8 ++-
drivers/target/iscsi/iscsi_target.c | 6 +-
fs/namei.c | 17 ++---
include/linux/bitmap.h | 8 +++
include/linux/netdevice.h | 1 +
include/linux/netfilter/ipset/ip_set.h | 7 ---
include/trace/events/xen.h | 6 +-
lib/bitmap.c | 20 ++++++
net/core/dev.c | 36 +++++++----
net/core/net-sysfs.c | 39 +++++++-----
net/core/rtnetlink.c | 13 +++-
net/ipv4/ip_tunnel.c | 4 +-
net/ipv4/tcp_bbr.c | 3 +-
net/ipv6/ip6_tunnel.c | 4 +-
net/ipv6/seg6_local.c | 4 +-
net/netfilter/ipset/ip_set_bitmap_gen.h | 2 +-
net/netfilter/ipset/ip_set_bitmap_ip.c | 6 +-
net/netfilter/ipset/ip_set_bitmap_ipmac.c | 6 +-
net/netfilter/ipset/ip_set_bitmap_port.c | 6 +-
net/sched/ematch.c | 2 +-
net/x25/af_x25.c | 6 +-
scripts/recordmcount.c | 17 +++++
52 files changed, 336 insertions(+), 177 deletions(-)
From: Dmitry Osipenko <[email protected]>
commit 74e3512731bd5c9673176425a76a7cc5efa8ddb6 upstream.
Fix double-free that happens when thermal zone setup fails, see KASAN log
below.
==================================================================
BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c
CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
Backtrace:
[<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24)
[<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0)
[<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250)
[<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88)
[<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200)
[<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18)
[<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294)
[<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c)
[<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8)
[<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4)
[<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578)
[<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384)
[<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4)
[<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4)
[<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c)
[<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8)
[<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c)
[<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20)
[<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec)
[<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4)
[<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c)
[<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc)
[<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240)
[<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
Exception stack(0xcf743fb0 to 0xcf743ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Allocated by task 132:
kasan_kmalloc.part.1+0x58/0xf4
kasan_kmalloc+0x90/0xa4
kmem_cache_alloc_trace+0x90/0x2a0
__hwmon_device_register+0xbc/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Freed by task 132:
__kasan_slab_free+0x12c/0x200
kasan_slab_free+0x14/0x18
kfree+0x90/0x294
hwmon_dev_release+0x1c/0x20
device_release+0x4c/0xe8
kobject_put+0xac/0x11c
device_unregister+0x2c/0x30
__hwmon_device_register+0xa58/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Cc: <[email protected]> # v4.15+
Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem")
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/hwmon.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -631,8 +631,10 @@ __hwmon_device_register(struct device *d
if (info[i]->config[j] & HWMON_T_INPUT) {
err = hwmon_thermal_add_sensor(dev,
hwdev, j);
- if (err)
- goto free_device;
+ if (err) {
+ device_unregister(hdev);
+ goto ida_remove;
+ }
}
}
}
@@ -640,8 +642,6 @@ __hwmon_device_register(struct device *d
return hdev;
-free_device:
- device_unregister(hdev);
free_hwmon:
kfree(hwdev);
ida_remove:
From: Alex Sverdlin <[email protected]>
commit 927d780ee371d7e121cea4fc7812f6ef2cea461c upstream.
Scenario 1, ARMv7
=================
If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer
the following may be generated:
00000230 <prealloc_fixed_plts>:
230: b5f8 push {r3, r4, r5, r6, r7, lr}
232: b500 push {lr}
234: f7ff fffe bl 0 <__gnu_mcount_nc>
234: R_ARM_THM_CALL __gnu_mcount_nc
238: f240 0600 movw r6, #0
238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc
23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180
FTRACE currently is not able to deal with it:
WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230()
...
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1
...
[<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8)
[<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90)
[<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c)
[<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230)
[<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444)
[<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8)
[<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358)
[<c0885a67>] (start_kernel) from [<00308095>] (0x308095)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60
actual: 44:f2:e1:36
ftrace record flags: 0
(0) expected tramp: c03143e9
Scenario 2, ARMv4T
==================
ftrace: allocating 14435 entries in 43 pages
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c)
[<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30)
[<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104)
[<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c)
[<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310)
[<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4)
[<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410)
[<c04cef4c>] (start_kernel) from [<00000000>] ( (null))
---[ end trace 0506a2f5dae6b341 ]---
ftrace failed to modify
[<c000c350>] perf_trace_sys_exit+0x5c/0xe8
actual: 1e:ff:2f:e1
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c000fb24
The analysis for this problem has been already performed previously,
refer to the link below.
Fix the above problems by allowing only selected reloc types in
__mcount_loc. The list itself comes from the legacy recordmcount.pl
script.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected]
Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount")
Signed-off-by: Alexander Sverdlin <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/recordmcount.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -53,6 +53,10 @@
#define R_AARCH64_ABS64 257
#endif
+#define R_ARM_PC24 1
+#define R_ARM_THM_CALL 10
+#define R_ARM_CALL 28
+
static int fd_map; /* File descriptor for file being modified. */
static int mmap_failed; /* Boolean flag. */
static char gpfx; /* prefix for global symbol name (sometimes '_') */
@@ -428,6 +432,18 @@ is_mcounted_section_name(char const *con
#define RECORD_MCOUNT_64
#include "recordmcount.h"
+static int arm_is_fake_mcount(Elf32_Rel const *rp)
+{
+ switch (ELF32_R_TYPE(w(rp->r_info))) {
+ case R_ARM_THM_CALL:
+ case R_ARM_CALL:
+ case R_ARM_PC24:
+ return 0;
+ }
+
+ return 1;
+}
+
/* 64-bit EM_MIPS has weird ELF64_Rela.r_info.
* http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf
* We interpret Table 29 Relocation Operation (Elf64_Rel, Elf64_Rela) [p.40]
@@ -529,6 +545,7 @@ do_file(char const *const fname)
altmcount = "__gnu_mcount_nc";
make_nop = make_nop_arm;
rel_type_nop = R_ARM_NONE;
+ is_fake_mcount32 = arm_is_fake_mcount;
break;
case EM_AARCH64:
reltype = R_AARCH64_ABS64;
From: Michał Mirosław <[email protected]>
commit 2a187d03352086e300daa2044051db00044cd171 upstream.
For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:
mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]
The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode.
Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode")
Cc: <[email protected]> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present
Cc: <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3592,11 +3592,13 @@ int sdhci_setup_host(struct sdhci_host *
if (host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else if (host->version >= SDHCI_SPEC_300) {
- if (host->clk_mul) {
- mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+ if (host->clk_mul)
max_clk = host->max_clk * host->clk_mul;
- } else
- mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+ /*
+ * Divided Clock Mode minimum clock rate is always less than
+ * Programmable Clock Mode minimum clock rate.
+ */
+ mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
} else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
From: Eric Dumazet <[email protected]>
[ Upstream commit 940ba14986657a50c15f694efca1beba31fa568f ]
A malicious user could use RAW sockets and fool
GTP using them as standard SOCK_DGRAM UDP sockets.
BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827
gtp_encap_enable drivers/net/gtp.c:844 [inline]
gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666
__rtnl_newlink net/core/rtnetlink.c:3305 [inline]
rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363
rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x441359
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144
kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline]
kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336
__alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800
alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207
alloc_pages include/linux/gfp.h:534 [inline]
alloc_slab_page+0x111/0x12f0 mm/slub.c:1511
allocate_slab mm/slub.c:1656 [inline]
new_slab+0x2bc/0x1130 mm/slub.c:1722
new_slab_objects mm/slub.c:2473 [inline]
___slab_alloc+0x1533/0x1f30 mm/slub.c:2624
__slab_alloc mm/slub.c:2664 [inline]
slab_alloc_node mm/slub.c:2738 [inline]
slab_alloc mm/slub.c:2783 [inline]
kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788
sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597
sk_alloc+0xf0/0xbe0 net/core/sock.c:1657
inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321
__sock_create+0x8eb/0xf00 net/socket.c:1420
sock_create net/socket.c:1471 [inline]
__sys_socket+0x1a1/0x600 net/socket.c:1513
__do_sys_socket net/socket.c:1522 [inline]
__se_sys_socket+0x8d/0xb0 net/socket.c:1520
__x64_sys_socket+0x4a/0x70 net/socket.c:1520
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Pablo Neira <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/gtp.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -807,19 +807,21 @@ static struct sock *gtp_encap_enable_soc
return NULL;
}
- if (sock->sk->sk_protocol != IPPROTO_UDP) {
+ sk = sock->sk;
+ if (sk->sk_protocol != IPPROTO_UDP ||
+ sk->sk_type != SOCK_DGRAM ||
+ (sk->sk_family != AF_INET && sk->sk_family != AF_INET6)) {
pr_debug("socket fd=%d not UDP\n", fd);
sk = ERR_PTR(-EINVAL);
goto out_sock;
}
- lock_sock(sock->sk);
- if (sock->sk->sk_user_data) {
+ lock_sock(sk);
+ if (sk->sk_user_data) {
sk = ERR_PTR(-EBUSY);
goto out_rel_sock;
}
- sk = sock->sk;
sock_hold(sk);
tuncfg.sk_user_data = gtp;
From: Eric Dumazet <[email protected]>
commit 48a322b6f9965b2f1e4ce81af972f0e287b07ed0 upstream.
kobject_put() should only be called in error path.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Jouni Hogander <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net-sysfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1339,6 +1339,7 @@ static int netdev_queue_add_kobject(stru
#endif
kobject_uevent(kobj, KOBJ_ADD);
+ return 0;
err:
kobject_put(kobj);
From: Jouni Hogander <[email protected]>
commit ddd9b5e3e765d8ed5a35786a6cb00111713fe161 upstream.
Dev_hold has to be called always in rx_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: syzbot <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: David Miller <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Jouni Hogander <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net-sysfs.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -911,14 +911,17 @@ static int rx_queue_add_kobject(struct n
struct kobject *kobj = &queue->kobj;
int error = 0;
+ /* Kobject_put later will trigger rx_queue_release call which
+ * decreases dev refcount: Take that reference here
+ */
+ dev_hold(queue->dev);
+
kobj->kset = dev->queues_kset;
error = kobject_init_and_add(kobj, &rx_queue_ktype, NULL,
"rx-%u", index);
if (error)
goto err;
- dev_hold(queue->dev);
-
if (dev->sysfs_rx_queue_group) {
error = sysfs_create_group(kobj, dev->sysfs_rx_queue_group);
if (error)
From: Jouni Hogander <[email protected]>
[ Upstream commit cb626bf566eb4433318d35681286c494f04fedcc ]
Netdev_register_kobject is calling device_initialize. In case of error
reference taken by device_initialize is not given up.
Drivers are supposed to call free_netdev in case of error. In non-error
case the last reference is given up there and device release sequence
is triggered. In error case this reference is kept and the release
sequence is never started.
Fix this by setting reg_state as NETREG_UNREGISTERED if registering
fails.
This is the rootcause for couple of memory leaks reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff8880675ca008 (size 256):
comm "netdev_register", pid 281, jiffies 4294696663 (age 6.808s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000058ca4711>] kmem_cache_alloc_trace+0x167/0x280
[<000000002340019b>] device_add+0x882/0x1750
[<000000001d588c3a>] netdev_register_kobject+0x128/0x380
[<0000000011ef5535>] register_netdevice+0xa1b/0xf00
[<000000007fcf1c99>] __tun_chr_ioctl+0x20d5/0x3dd0
[<000000006a5b7b2b>] tun_chr_ioctl+0x2f/0x40
[<00000000f30f834a>] do_vfs_ioctl+0x1c7/0x1510
[<00000000fba062ea>] ksys_ioctl+0x99/0xb0
[<00000000b1c1b8d2>] __x64_sys_ioctl+0x78/0xb0
[<00000000984cabb9>] do_syscall_64+0x16f/0x580
[<000000000bde033d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000e6ca2d9f>] 0xffffffffffffffff
BUG: memory leak
unreferenced object 0xffff8880668ba588 (size 8):
comm "kobject_set_nam", pid 286, jiffies 4294725297 (age 9.871s)
hex dump (first 8 bytes):
6e 72 30 00 cc be df 2b nr0....+
backtrace:
[<00000000a322332a>] __kmalloc_track_caller+0x16e/0x290
[<00000000236fd26b>] kstrdup+0x3e/0x70
[<00000000dd4a2815>] kstrdup_const+0x3e/0x50
[<0000000049a377fc>] kvasprintf_const+0x10e/0x160
[<00000000627fc711>] kobject_set_name_vargs+0x5b/0x140
[<0000000019eeab06>] dev_set_name+0xc0/0xf0
[<0000000069cb12bc>] netdev_register_kobject+0xc8/0x320
[<00000000f2e83732>] register_netdevice+0xa1b/0xf00
[<000000009e1f57cc>] __tun_chr_ioctl+0x20d5/0x3dd0
[<000000009c560784>] tun_chr_ioctl+0x2f/0x40
[<000000000d759e02>] do_vfs_ioctl+0x1c7/0x1510
[<00000000351d7c31>] ksys_ioctl+0x99/0xb0
[<000000008390040a>] __x64_sys_ioctl+0x78/0xb0
[<0000000052d196b7>] do_syscall_64+0x16f/0x580
[<0000000019af9236>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000bc384531>] 0xffffffffffffffff
v3 -> v4:
Set reg_state to NETREG_UNREGISTERED if registering fails
v2 -> v3:
* Replaced BUG_ON with WARN_ON in free_netdev and netdev_release
v1 -> v2:
* Relying on driver calling free_netdev rather than calling
put_device directly in error path
Reported-by: [email protected]
Cc: David Miller <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Jouni Hogander <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -7667,8 +7667,10 @@ int register_netdevice(struct net_device
goto err_uninit;
ret = netdev_register_kobject(dev);
- if (ret)
+ if (ret) {
+ dev->reg_state = NETREG_UNREGISTERED;
goto err_uninit;
+ }
dev->reg_state = NETREG_REGISTERED;
__netdev_update_features(dev);
From: Wen Yang <[email protected]>
[ Upstream commit 5b2f1f3070b6447b76174ea8bfb7390dc6253ebd ]
do_div() does a 64-by-32 division. Use div64_long() instead of it
if the divisor is long, to avoid truncation to 32-bit.
And as a nice side effect also cleans up the function a bit.
Signed-off-by: Wen Yang <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Alexey Kuznetsov <[email protected]>
Cc: Hideaki YOSHIFUJI <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_bbr.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -678,8 +678,7 @@ static void bbr_update_bw(struct sock *s
* bandwidth sample. Delivered is in packets and interval_us in uS and
* ratio will be <<1 for most connections. So delivered is first scaled.
*/
- bw = (u64)rs->delivered * BW_UNIT;
- do_div(bw, rs->interval_us);
+ bw = div64_long((u64)rs->delivered * BW_UNIT, rs->interval_us);
/* If this sample is application-limited, it is likely to have a very
* low delivered count that represents application behavior rather than
From: James Hughes <[email protected]>
[ Upstream commit ce896476c65d72b4b99fa09c2f33436b4198f034 ]
As reported by Eric Dumazet, there are still some outstanding
cases where the driver does not handle TSO correctly when skb's
are over a certain size. Most cases have been fixed, this patch
should ensure that forwarded SKB's that are greater than
MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented
and handled correctly.
Signed-off-by: James Hughes <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/lan78xx.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -31,6 +31,7 @@
#include <linux/mdio.h>
#include <linux/phy.h>
#include <net/ip6_checksum.h>
+#include <net/vxlan.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
@@ -3525,6 +3526,19 @@ static void lan78xx_tx_timeout(struct ne
tasklet_schedule(&dev->bh);
}
+static netdev_features_t lan78xx_features_check(struct sk_buff *skb,
+ struct net_device *netdev,
+ netdev_features_t features)
+{
+ if (skb->len + TX_OVERHEAD > MAX_SINGLE_PACKET_SIZE)
+ features &= ~NETIF_F_GSO_MASK;
+
+ features = vlan_features_check(skb, features);
+ features = vxlan_features_check(skb, features);
+
+ return features;
+}
+
static const struct net_device_ops lan78xx_netdev_ops = {
.ndo_open = lan78xx_open,
.ndo_stop = lan78xx_stop,
@@ -3538,6 +3552,7 @@ static const struct net_device_ops lan78
.ndo_set_features = lan78xx_set_features,
.ndo_vlan_rx_add_vid = lan78xx_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = lan78xx_vlan_rx_kill_vid,
+ .ndo_features_check = lan78xx_features_check,
};
static void lan78xx_stat_monitor(unsigned long param)
From: Eric Dumazet <[email protected]>
[ Upstream commit d836f5c69d87473ff65c06a6123e5b2cf5e56f5b ]
rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu
checks that we apply in do_setlink()
Otherwise malicious users can crash the kernel, for example after
an integer overflow :
BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline]
BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192
memset+0x24/0x40 mm/kasan/common.c:108
memset include/linux/string.h:365 [inline]
__alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
alloc_skb include/linux/skbuff.h:1049 [inline]
alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664
sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242
sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259
mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609
add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713
add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844
mld_send_cr net/ipv6/mcast.c:1970 [inline]
mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786
__do_softirq+0x262/0x98c kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x19b/0x1e0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79
RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54
RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000
arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690
default_idle_call+0x84/0xb0 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361
rest_init+0x23b/0x371 init/main.c:451
arch_call_rest_init+0xe/0x1b
start_kernel+0x904/0x943 init/main.c:784
x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242
The buggy address belongs to the page:
page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netdevice.h | 1 +
net/core/dev.c | 32 ++++++++++++++++++++------------
net/core/rtnetlink.c | 13 +++++++++++--
3 files changed, 32 insertions(+), 14 deletions(-)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3313,6 +3313,7 @@ int dev_set_alias(struct net_device *, c
int dev_change_net_namespace(struct net_device *, struct net *, const char *);
int __dev_set_mtu(struct net_device *, int);
int dev_set_mtu(struct net_device *, int);
+int dev_validate_mtu(struct net_device *dev, int mtu);
void dev_set_group(struct net_device *, int);
int dev_set_mac_address(struct net_device *, struct sockaddr *);
int dev_change_carrier(struct net_device *, bool new_carrier);
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6896,18 +6896,9 @@ int dev_set_mtu(struct net_device *dev,
if (new_mtu == dev->mtu)
return 0;
- /* MTU must be positive, and in range */
- if (new_mtu < 0 || new_mtu < dev->min_mtu) {
- net_err_ratelimited("%s: Invalid MTU %d requested, hw min %d\n",
- dev->name, new_mtu, dev->min_mtu);
- return -EINVAL;
- }
-
- if (dev->max_mtu > 0 && new_mtu > dev->max_mtu) {
- net_err_ratelimited("%s: Invalid MTU %d requested, hw max %d\n",
- dev->name, new_mtu, dev->max_mtu);
- return -EINVAL;
- }
+ err = dev_validate_mtu(dev, new_mtu);
+ if (err)
+ return err;
if (!netif_device_present(dev))
return -ENODEV;
@@ -7769,6 +7760,23 @@ int init_dummy_netdev(struct net_device
EXPORT_SYMBOL_GPL(init_dummy_netdev);
+int dev_validate_mtu(struct net_device *dev, int new_mtu)
+{
+ /* MTU must be positive, and in range */
+ if (new_mtu < 0 || new_mtu < dev->min_mtu) {
+ net_err_ratelimited("%s: Invalid MTU %d requested, hw min %d\n",
+ dev->name, new_mtu, dev->min_mtu);
+ return -EINVAL;
+ }
+
+ if (dev->max_mtu > 0 && new_mtu > dev->max_mtu) {
+ net_err_ratelimited("%s: Invalid MTU %d requested, hw max %d\n",
+ dev->name, new_mtu, dev->max_mtu);
+ return -EINVAL;
+ }
+ return 0;
+}
+
/**
* register_netdev - register a network device
* @dev: device to register
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2466,8 +2466,17 @@ struct net_device *rtnl_create_link(stru
dev->rtnl_link_ops = ops;
dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
- if (tb[IFLA_MTU])
- dev->mtu = nla_get_u32(tb[IFLA_MTU]);
+ if (tb[IFLA_MTU]) {
+ u32 mtu = nla_get_u32(tb[IFLA_MTU]);
+ int err;
+
+ err = dev_validate_mtu(dev, mtu);
+ if (err) {
+ free_netdev(dev);
+ return ERR_PTR(err);
+ }
+ dev->mtu = mtu;
+ }
if (tb[IFLA_ADDRESS]) {
memcpy(dev->dev_addr, nla_data(tb[IFLA_ADDRESS]),
nla_len(tb[IFLA_ADDRESS]));
From: Suzuki K Poulose <[email protected]>
commit 730766bae3280a25d40ea76a53dc6342e84e6513 upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 2997aa4063d97fdb39 ("coresight: etb10: implementing AUX API")
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Cc: stable <[email protected]> # 4.6+
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-etb10.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -287,9 +287,7 @@ static void *etb_alloc_buffer(struct cor
int node;
struct cs_buffers *buf;
- if (cpu == -1)
- cpu = smp_processor_id();
- node = cpu_to_node(cpu);
+ node = (cpu == -1) ? NUMA_NO_NODE : cpu_to_node(cpu);
buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
if (!buf)
From: Masato Suzuki <[email protected]>
ZBC/ZAC report zones command may return less bytes than requested if the
number of matching zones for the report request is small. However, unlike
read or write commands, the remainder of incomplete report zones commands
cannot be automatically requested by the block layer: the start sector of
the next report cannot be known, and the report reply may not be 512B
aligned for SAS drives (a report zone reply size is always a multiple of
64B). The regular request completion code executing bio_advance() and
restart of the command remainder part currently causes invalid zone
descriptor data to be reported to the caller if the report zone size is
smaller than 512B (a case that can happen easily for a report of the last
zones of a SAS drive for example).
Since blkdev_report_zones() handles report zone command processing in a
loop until completion (no more zones are being reported), we can safely
avoid that the block layer performs an incorrect bio_advance() call and
restart of the remainder of incomplete report zone BIOs. To do so, always
indicate a full completion of REQ_OP_ZONE_REPORT by setting good_bytes to
the request buffer size and by setting the command resid to 0. This does
not affect the post processing of the report zone reply done by
sd_zbc_complete() since the reply header indicates the number of zones
reported.
Fixes: 89d947561077 ("sd: Implement support for ZBC devices")
Cc: <[email protected]> # 4.19
Cc: <[email protected]> # 4.14
Signed-off-by: Masato Suzuki <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1981,9 +1981,13 @@ static int sd_done(struct scsi_cmnd *SCp
}
break;
case REQ_OP_ZONE_REPORT:
+ /* To avoid that the block layer performs an incorrect
+ * bio_advance() call and restart of the remainder of
+ * incomplete report zone BIOs, always indicate a full
+ * completion of REQ_OP_ZONE_REPORT.
+ */
if (!result) {
- good_bytes = scsi_bufflen(SCpnt)
- - scsi_get_resid(SCpnt);
+ good_bytes = scsi_bufflen(SCpnt);
scsi_set_resid(SCpnt, 0);
} else {
good_bytes = 0;
From: Andy Shevchenko <[email protected]>
commit e64e4018d572710c44f42c923d4ac059f0a23320 upstream.
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods.
On the other hand MD bitmap API is special case.
Adding 'md' prefix to it to avoid name space collision.
No functional changes intended.
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Shaohua Li <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
[only take the bitmap_free change for stable - gregkh]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bitmap.c | 10 +++++-----
drivers/md/bitmap.h | 2 +-
drivers/md/md-cluster.c | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1729,7 +1729,7 @@ void bitmap_flush(struct mddev *mddev)
/*
* free memory that was allocated
*/
-void bitmap_free(struct bitmap *bitmap)
+void md_bitmap_free(struct bitmap *bitmap)
{
unsigned long k, pages;
struct bitmap_page *bp;
@@ -1763,7 +1763,7 @@ void bitmap_free(struct bitmap *bitmap)
kfree(bp);
kfree(bitmap);
}
-EXPORT_SYMBOL(bitmap_free);
+EXPORT_SYMBOL(md_bitmap_free);
void bitmap_wait_behind_writes(struct mddev *mddev)
{
@@ -1796,7 +1796,7 @@ void bitmap_destroy(struct mddev *mddev)
if (mddev->thread)
mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
}
/*
@@ -1887,7 +1887,7 @@ struct bitmap *bitmap_create(struct mdde
return bitmap;
error:
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
return ERR_PTR(err);
}
@@ -1958,7 +1958,7 @@ struct bitmap *get_bitmap_from_slot(stru
rv = bitmap_init_from_disk(bitmap, 0);
if (rv) {
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
return ERR_PTR(rv);
}
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -271,7 +271,7 @@ int bitmap_resize(struct bitmap *bitmap,
struct bitmap *get_bitmap_from_slot(struct mddev *mddev, int slot);
int bitmap_copy_from_slot(struct mddev *mddev, int slot,
sector_t *lo, sector_t *hi, bool clear_bits);
-void bitmap_free(struct bitmap *bitmap);
+void md_bitmap_free(struct bitmap *bitmap);
void bitmap_wait_behind_writes(struct mddev *mddev);
#endif
--- a/drivers/md/md-cluster.c
+++ b/drivers/md/md-cluster.c
@@ -1128,7 +1128,7 @@ int cluster_check_sync_size(struct mddev
bm_lockres = lockres_init(mddev, str, NULL, 1);
if (!bm_lockres) {
pr_err("md-cluster: Cannot initialize %s\n", str);
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
return -1;
}
bm_lockres->flags |= DLM_LKF_NOQUEUE;
@@ -1142,11 +1142,11 @@ int cluster_check_sync_size(struct mddev
sync_size = sb->sync_size;
else if (sync_size != sb->sync_size) {
kunmap_atomic(sb);
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
return -1;
}
kunmap_atomic(sb);
- bitmap_free(bitmap);
+ md_bitmap_free(bitmap);
}
return (my_sync_size == sync_size) ? 0 : -1;
From: Bo Wu <[email protected]>
commit bba340c79bfe3644829db5c852fdfa9e33837d6d upstream.
In iscsi_if_rx func, after receiving one request through
iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to
reply to the request in a do-while loop. If the iscsi_if_send_reply
function keeps returning -EAGAIN, a deadlock will occur.
For example, a client only send msg without calling recvmsg func, then
it will result in the watchdog soft lockup. The details are given as
follows:
sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI);
retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr);
while (1) {
state_msg = sendmsg(sock_fd, &msg, 0);
//Note: recvmsg(sock_fd, &msg, 0) is not processed here.
}
close(sock_fd);
watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat:
curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0
deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq:
TIMER: 992
SCHED: 8
Sample irqstat:
irq 2: delta 1003, curr: 3103802, arch_timer
CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40400005 (nZcv daif +PAN -UAO)
pc : __alloc_skb+0x104/0x1b0
lr : __alloc_skb+0x9c/0x1b0
sp : ffff000033603a30
x29: ffff000033603a30 x28: 00000000000002dd
x27: ffff800b34ced810 x26: ffff800ba7569f00
x25: 00000000ffffffff x24: 0000000000000000
x23: ffff800f7c43f600 x22: 0000000000480020
x21: ffff0000091d9000 x20: ffff800b34eff200
x19: ffff800ba7569f00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0001000101000100
x13: 0000000101010000 x12: 0101000001010100
x11: 0001010101010001 x10: 00000000000002dd
x9 : ffff000033603d58 x8 : ffff800b34eff400
x7 : ffff800ba7569200 x6 : ffff800b34eff400
x5 : 0000000000000000 x4 : 00000000ffffffff
x3 : 0000000000000000 x2 : 0000000000000001
x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace:
__alloc_skb+0x104/0x1b0
iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi]
netlink_unicast+0x1e0/0x258
netlink_sendmsg+0x310/0x378
sock_sendmsg+0x4c/0x70
sock_write_iter+0x90/0xf0
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.com
Signed-off-by: Bo Wu <[email protected]>
Reviewed-by: Zhiqiang Liu <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_transport_iscsi.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -37,6 +37,8 @@
#define ISCSI_TRANSPORT_VERSION "2.0-870"
+#define ISCSI_SEND_MAX_ALLOWED 10
+
static int dbg_session;
module_param_named(debug_session, dbg_session, int,
S_IRUGO | S_IWUSR);
@@ -3680,6 +3682,7 @@ iscsi_if_rx(struct sk_buff *skb)
struct nlmsghdr *nlh;
struct iscsi_uevent *ev;
uint32_t group;
+ int retries = ISCSI_SEND_MAX_ALLOWED;
nlh = nlmsg_hdr(skb);
if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) ||
@@ -3710,6 +3713,10 @@ iscsi_if_rx(struct sk_buff *skb)
break;
err = iscsi_if_send_reply(portid, nlh->nlmsg_type,
ev, sizeof(*ev));
+ if (err == -EAGAIN && --retries < 0) {
+ printk(KERN_WARNING "Send reply failed, error %d\n", err);
+ break;
+ }
} while (err < 0 && err != -ECONNREFUSED && err != -ESRCH);
skb_pull(skb, rlen);
}
From: Martin Schiller <[email protected]>
commit e21dba7a4df4d93da237da65a096084b4f2e87b4 upstream.
This patch fixes 2 issues in x25_connect():
1. It makes absolutely no sense to reset the neighbour and the
connection state after a (successful) nonblocking call of x25_connect.
This prevents any connection from being established, since the response
(call accept) cannot be processed.
2. Any further calls to x25_connect() while a call is pending should
simply return, instead of creating new Call Request (on different
logical channels).
This patch should also fix the "KASAN: null-ptr-deref Write in
x25_connect" and "BUG: unable to handle kernel NULL pointer dereference
in x25_connect" bugs reported by syzbot.
Signed-off-by: Martin Schiller <[email protected]>
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/x25/af_x25.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -764,6 +764,10 @@ static int x25_connect(struct socket *so
if (sk->sk_state == TCP_ESTABLISHED)
goto out;
+ rc = -EALREADY; /* Do nothing if call is already in progress */
+ if (sk->sk_state == TCP_SYN_SENT)
+ goto out;
+
sk->sk_state = TCP_CLOSE;
sock->state = SS_UNCONNECTED;
@@ -810,7 +814,7 @@ static int x25_connect(struct socket *so
/* Now the loop */
rc = -EINPROGRESS;
if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
- goto out_put_neigh;
+ goto out;
rc = x25_wait_for_connection_establishment(sk);
if (rc)
From: Johan Hovold <[email protected]>
commit 3111491fca4f01764e0c158c5e0f7ced808eef51 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Vladis Dronov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/aiptek.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1822,14 +1822,14 @@ aiptek_probe(struct usb_interface *intf,
input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
/* Verify that a device really has an endpoint */
- if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&intf->dev,
"interface has %d endpoints, but must have minimum 1\n",
- intf->altsetting[0].desc.bNumEndpoints);
+ intf->cur_altsetting->desc.bNumEndpoints);
err = -EINVAL;
goto fail3;
}
- endpoint = &intf->altsetting[0].endpoint[0].desc;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* Go set up our URB, which is called when the tablet receives
* input.
From: Jeremy Linton <[email protected]>
commit de19055564c8f8f9d366f8db3395836da0b2176c upstream.
For a while Arm64 has been capable of force enabling
or disabling the kpti mitigations. Lets make sure the
documentation reflects that.
Signed-off-by: Jeremy Linton <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 6 ++++++
1 file changed, 6 insertions(+)
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1845,6 +1845,12 @@
Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
the default is off.
+ kpti= [ARM64] Control page table isolation of user
+ and kernel address spaces.
+ Default: enabled on cores which need mitigation.
+ 0: force disabled
+ 1: force enabled
+
kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
Default is 0 (don't ignore, but inject #GP)
From: Johan Hovold <[email protected]>
commit bcfcb7f9b480dd0be8f0df2df17340ca92a03b98 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could be used by a
malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer
dereference.
Fixes: 1afca2b66aac ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Martin Kepplinger <[email protected]>
Acked-by: Vladis Dronov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/pegasus_notetaker.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/tablet/pegasus_notetaker.c
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -260,7 +260,7 @@ static int pegasus_probe(struct usb_inte
return -ENODEV;
/* Sanity check that the device has an endpoint */
- if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&intf->dev, "Invalid number of endpoints\n");
return -EINVAL;
}
From: Gilles Buloz <[email protected]>
commit 7713e62c8623c54dac88d1fa724aa487a38c3efb upstream.
in0 thresholds are written to the in2 thresholds registers
in2 thresholds to in3 thresholds
in3 thresholds to in4 thresholds
in4 thresholds to in0 thresholds
Signed-off-by: Gilles Buloz <[email protected]>
Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%[email protected]
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/nct7802.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -32,8 +32,8 @@
static const u8 REG_VOLTAGE[5] = { 0x09, 0x0a, 0x0c, 0x0d, 0x0e };
static const u8 REG_VOLTAGE_LIMIT_LSB[2][5] = {
- { 0x40, 0x00, 0x42, 0x44, 0x46 },
- { 0x3f, 0x00, 0x41, 0x43, 0x45 },
+ { 0x46, 0x00, 0x40, 0x42, 0x44 },
+ { 0x45, 0x00, 0x3f, 0x41, 0x43 },
};
static const u8 REG_VOLTAGE_LIMIT_MSB[5] = { 0x48, 0x00, 0x47, 0x47, 0x48 };
From: Bart Van Assche <[email protected]>
commit 04060db41178c7c244f2c7dcd913e7fd331de915 upstream.
iscsit_close_connection() calls isert_wait_conn(). Due to commit
e9d3009cb936 both functions call target_wait_for_sess_cmds() although that
last function should be called only once. Fix this by removing the
target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling
isert_wait_conn() after target_wait_for_sess_cmds().
Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session").
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Rahul Kundu <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Tested-by: Mike Marciniszyn <[email protected]>
Acked-by: Sagi Grimberg <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/ulp/isert/ib_isert.c | 12 ------------
drivers/target/iscsi/iscsi_target.c | 6 +++---
2 files changed, 3 insertions(+), 15 deletions(-)
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -2582,17 +2582,6 @@ isert_wait4logout(struct isert_conn *ise
}
}
-static void
-isert_wait4cmds(struct iscsi_conn *conn)
-{
- isert_info("iscsi_conn %p\n", conn);
-
- if (conn->sess) {
- target_sess_cmd_list_set_waiting(conn->sess->se_sess);
- target_wait_for_sess_cmds(conn->sess->se_sess);
- }
-}
-
/**
* isert_put_unsol_pending_cmds() - Drop commands waiting for
* unsolicitate dataout
@@ -2640,7 +2629,6 @@ static void isert_wait_conn(struct iscsi
ib_drain_qp(isert_conn->qp);
isert_put_unsol_pending_cmds(conn);
- isert_wait4cmds(conn);
isert_wait4logout(isert_conn);
queue_work(isert_release_wq, &isert_conn->release_work);
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4155,9 +4155,6 @@ int iscsit_close_connection(
iscsit_stop_nopin_response_timer(conn);
iscsit_stop_nopin_timer(conn);
- if (conn->conn_transport->iscsit_wait_conn)
- conn->conn_transport->iscsit_wait_conn(conn);
-
/*
* During Connection recovery drop unacknowledged out of order
* commands for this connection, and prepare the other commands
@@ -4243,6 +4240,9 @@ int iscsit_close_connection(
target_sess_cmd_list_set_waiting(sess->se_sess);
target_wait_for_sess_cmds(sess->se_sess);
+ if (conn->conn_transport->iscsit_wait_conn)
+ conn->conn_transport->iscsit_wait_conn(conn);
+
ahash_request_free(conn->conn_tx_hash);
if (conn->conn_rx_hash) {
struct crypto_ahash *tfm;
From: Al Viro <[email protected]>
commit d0cb50185ae942b03c4327be322055d622dc79f6 upstream.
may_create_in_sticky() call is done when we already have dropped the
reference to dir.
Fixes: 30aba6656f61e (namei: allow restricted O_CREAT of FIFOs and regular files)
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namei.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1023,7 +1023,8 @@ static int may_linkat(struct path *link)
* may_create_in_sticky - Check whether an O_CREAT open in a sticky directory
* should be allowed, or not, on files that already
* exist.
- * @dir: the sticky parent directory
+ * @dir_mode: mode bits of directory
+ * @dir_uid: owner of directory
* @inode: the inode of the file to open
*
* Block an O_CREAT open of a FIFO (or a regular file) when:
@@ -1039,18 +1040,18 @@ static int may_linkat(struct path *link)
*
* Returns 0 if the open is allowed, -ve on error.
*/
-static int may_create_in_sticky(struct dentry * const dir,
+static int may_create_in_sticky(umode_t dir_mode, kuid_t dir_uid,
struct inode * const inode)
{
if ((!sysctl_protected_fifos && S_ISFIFO(inode->i_mode)) ||
(!sysctl_protected_regular && S_ISREG(inode->i_mode)) ||
- likely(!(dir->d_inode->i_mode & S_ISVTX)) ||
- uid_eq(inode->i_uid, dir->d_inode->i_uid) ||
+ likely(!(dir_mode & S_ISVTX)) ||
+ uid_eq(inode->i_uid, dir_uid) ||
uid_eq(current_fsuid(), inode->i_uid))
return 0;
- if (likely(dir->d_inode->i_mode & 0002) ||
- (dir->d_inode->i_mode & 0020 &&
+ if (likely(dir_mode & 0002) ||
+ (dir_mode & 0020 &&
((sysctl_protected_fifos >= 2 && S_ISFIFO(inode->i_mode)) ||
(sysctl_protected_regular >= 2 && S_ISREG(inode->i_mode))))) {
return -EACCES;
@@ -3265,6 +3266,8 @@ static int do_last(struct nameidata *nd,
int *opened)
{
struct dentry *dir = nd->path.dentry;
+ kuid_t dir_uid = dir->d_inode->i_uid;
+ umode_t dir_mode = dir->d_inode->i_mode;
int open_flag = op->open_flag;
bool will_truncate = (open_flag & O_TRUNC) != 0;
bool got_write = false;
@@ -3400,7 +3403,7 @@ finish_open:
error = -EISDIR;
if (d_is_dir(nd->path.dentry))
goto out;
- error = may_create_in_sticky(dir,
+ error = may_create_in_sticky(dir_mode, dir_uid,
d_backing_inode(nd->path.dentry));
if (unlikely(error))
goto out;
From: Johan Hovold <[email protected]>
commit a8eeb74df5a6bdb214b2b581b14782c5f5a0cf83 upstream.
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could lead to the
driver binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 162f98dea487 ("Input: gtco - fix crash on detecting device without endpoints")
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Vladis Dronov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/tablet/gtco.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -875,18 +875,14 @@ static int gtco_probe(struct usb_interfa
}
/* Sanity check that a device has an endpoint */
- if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
+ if (usbinterface->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&usbinterface->dev,
"Invalid number of endpoints\n");
error = -EINVAL;
goto err_free_urb;
}
- /*
- * The endpoint is always altsetting 0, we know this since we know
- * this device only has one interrupt endpoint
- */
- endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+ endpoint = &usbinterface->cur_altsetting->endpoint[0].desc;
/* Some debug */
dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
@@ -973,7 +969,7 @@ static int gtco_probe(struct usb_interfa
input_dev->dev.parent = &usbinterface->dev;
/* Setup the URB, it will be posted later on open of input device */
- endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+ endpoint = &usbinterface->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(gtco->urbinfo,
udev,
From: Changbin Du <[email protected]>
commit d0695e2351102affd8efae83989056bc4b275917 upstream.
Just as commit 0566e40ce7 ("tracing: initcall: Ordered comparison of
function pointers"), this patch fixes another remaining one in xen.h
found by clang-9.
In file included from arch/x86/xen/trace.c:21:
In file included from ./include/trace/events/xen.h:475:
In file included from ./include/trace/define_trace.h:102:
In file included from ./include/trace/trace_events.h:473:
./include/trace/events/xen.h:69:7: warning: ordered comparison of function \
pointers ('xen_mc_callback_fn_t' (aka 'void (*)(void *)') and 'xen_mc_callback_fn_t') [-Wordered-compare-function-pointers]
__field(xen_mc_callback_fn_t, fn)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/trace/trace_events.h:421:29: note: expanded from macro '__field'
^
./include/trace/trace_events.h:407:6: note: expanded from macro '__field_ext'
is_signed_type(type), filter_type); \
^
./include/linux/trace_events.h:554:44: note: expanded from macro 'is_signed_type'
^
Fixes: c796f213a6934 ("xen/trace: add multicall tracing")
Signed-off-by: Changbin Du <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/trace/events/xen.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/include/trace/events/xen.h
+++ b/include/trace/events/xen.h
@@ -66,7 +66,11 @@ TRACE_EVENT(xen_mc_callback,
TP_PROTO(xen_mc_callback_fn_t fn, void *data),
TP_ARGS(fn, data),
TP_STRUCT__entry(
- __field(xen_mc_callback_fn_t, fn)
+ /*
+ * Use field_struct to avoid is_signed_type()
+ * comparison of a function pointer.
+ */
+ __field_struct(xen_mc_callback_fn_t, fn)
__field(void *, data)
),
TP_fast_assign(
From: Chuhong Yuan <[email protected]>
commit 97e24b095348a15ec08c476423c3b3b939186ad7 upstream.
The driver misses a check for devm_thermal_zone_of_sensor_register().
Add a check to fix it.
Fixes: e28d0c9cd381 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register")
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/sun4i-ts.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -246,6 +246,7 @@ static int sun4i_ts_probe(struct platfor
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device *hwmon;
+ struct thermal_zone_device *thermal;
int error;
u32 reg;
bool ts_attached;
@@ -365,7 +366,10 @@ static int sun4i_ts_probe(struct platfor
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
- devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops);
+ thermal = devm_thermal_zone_of_sensor_register(ts->dev, 0, ts,
+ &sun4i_ts_tz_ops);
+ if (IS_ERR(thermal))
+ return PTR_ERR(thermal);
writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
From: Andy Shevchenko <[email protected]>
commit c42b65e363ce97a828f81b59033c3558f8fa7f70 upstream.
A lot of code become ugly because of open coding allocations for bitmaps.
Introduce three helpers to allow users be more clear of intention
and keep their code neat.
Note, due to multiple circular dependencies we may not provide
the helpers as inliners. For now we keep them exported and, perhaps,
at some point in the future we will sort out header inclusion and
inheritance.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/bitmap.h | 8 ++++++++
lib/bitmap.c | 20 ++++++++++++++++++++
2 files changed, 28 insertions(+)
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -87,6 +87,14 @@
*/
/*
+ * Allocation and deallocation of bitmap.
+ * Provided in lib/bitmap.c to avoid circular dependency.
+ */
+extern unsigned long *bitmap_alloc(unsigned int nbits, gfp_t flags);
+extern unsigned long *bitmap_zalloc(unsigned int nbits, gfp_t flags);
+extern void bitmap_free(const unsigned long *bitmap);
+
+/*
* lib/bitmap.c provides these functions:
*/
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -13,6 +13,7 @@
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
@@ -1212,3 +1213,22 @@ void bitmap_copy_le(unsigned long *dst,
}
EXPORT_SYMBOL(bitmap_copy_le);
#endif
+
+unsigned long *bitmap_alloc(unsigned int nbits, gfp_t flags)
+{
+ return kmalloc_array(BITS_TO_LONGS(nbits), sizeof(unsigned long),
+ flags);
+}
+EXPORT_SYMBOL(bitmap_alloc);
+
+unsigned long *bitmap_zalloc(unsigned int nbits, gfp_t flags)
+{
+ return bitmap_alloc(nbits, flags | __GFP_ZERO);
+}
+EXPORT_SYMBOL(bitmap_zalloc);
+
+void bitmap_free(const unsigned long *bitmap)
+{
+ kfree(bitmap);
+}
+EXPORT_SYMBOL(bitmap_free);
From: Luuk Paulussen <[email protected]>
commit cf3ca1877574a306c0207cbf7fdf25419d9229df upstream.
reg2volt returns the voltage that matches a given register value.
Converting this back the other way with volt2reg didn't return the same
register value because it used truncation instead of rounding.
This meant that values read from sysfs could not be written back to sysfs
to set back the same register value.
With this change, volt2reg will return the same value for every voltage
previously returned by reg2volt (for the set of possible input values)
Signed-off-by: Luuk Paulussen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
cc: [email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/adt7475.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -297,9 +297,10 @@ static inline u16 volt2reg(int channel,
long reg;
if (bypass_attn & (1 << channel))
- reg = (volt * 1024) / 2250;
+ reg = DIV_ROUND_CLOSEST(volt * 1024, 2250);
else
- reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+ reg = DIV_ROUND_CLOSEST(volt * r[1] * 1024,
+ (r[0] + r[1]) * 2250);
return clamp_val(reg, 0, 1023) & (0xff << 2);
}
From: Suzuki K Poulose <[email protected]>
commit 024c1fd9dbcc1d8a847f1311f999d35783921b7f upstream.
During a perf session we try to allocate buffers on the "node" associated
with the CPU the event is bound to. If it is not bound to a CPU, we
use the current CPU node, using smp_processor_id(). However this is unsafe
in a pre-emptible context and could generate the splats as below :
BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544
caller is tmc_alloc_etf_buffer+0x5c/0x60
CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
Call trace:
dump_backtrace+0x0/0x150
show_stack+0x14/0x20
dump_stack+0x9c/0xc4
debug_smp_processor_id+0x10c/0x110
tmc_alloc_etf_buffer+0x5c/0x60
etm_setup_aux+0x1c4/0x230
rb_alloc_aux+0x1b8/0x2b8
perf_mmap+0x35c/0x478
mmap_region+0x34c/0x4f0
do_mmap+0x2d8/0x418
vm_mmap_pgoff+0xd0/0xf8
ksys_mmap_pgoff+0x88/0xf8
__arm64_sys_mmap+0x28/0x38
el0_svc_handler+0xd8/0x138
el0_svc+0x8/0xc
Use NUMA_NO_NODE hint instead of using the current node for events
not bound to CPUs.
Fixes: 2e499bbc1a929ac ("coresight: tmc: implementing TMC-ETF AUX space API")
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Cc: stable <[email protected]> # 4.7+
Signed-off-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -308,9 +308,7 @@ static void *tmc_alloc_etf_buffer(struct
int node;
struct cs_buffers *buf;
- if (cpu == -1)
- cpu = smp_processor_id();
- node = cpu_to_node(cpu);
+ node = (cpu == -1) ? NUMA_NO_NODE : cpu_to_node(cpu);
/* Allocate memory structure for interaction with Perf */
buf = kzalloc_node(sizeof(struct cs_buffers), GFP_KERNEL, node);
From: Hans Verkuil <[email protected]>
commit ee8951e56c0f960b9621636603a822811cef3158 upstream.
v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format
have a reserved array at the end that should be zeroed by drivers
as per the V4L2 spec. Older drivers often do not do this, so just
handle this in the core.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1496,12 +1496,12 @@ static int v4l_s_fmt(const struct v4l2_i
case V4L2_BUF_TYPE_VBI_CAPTURE:
if (unlikely(!ops->vidioc_s_fmt_vbi_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.vbi);
+ CLEAR_AFTER_FIELD(p, fmt.vbi.flags);
return ops->vidioc_s_fmt_vbi_cap(file, fh, arg);
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
if (unlikely(!ops->vidioc_s_fmt_sliced_vbi_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.sliced);
+ CLEAR_AFTER_FIELD(p, fmt.sliced.io_size);
return ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, arg);
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
if (unlikely(!ops->vidioc_s_fmt_vid_out))
@@ -1524,22 +1524,22 @@ static int v4l_s_fmt(const struct v4l2_i
case V4L2_BUF_TYPE_VBI_OUTPUT:
if (unlikely(!ops->vidioc_s_fmt_vbi_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.vbi);
+ CLEAR_AFTER_FIELD(p, fmt.vbi.flags);
return ops->vidioc_s_fmt_vbi_out(file, fh, arg);
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
if (unlikely(!ops->vidioc_s_fmt_sliced_vbi_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.sliced);
+ CLEAR_AFTER_FIELD(p, fmt.sliced.io_size);
return ops->vidioc_s_fmt_sliced_vbi_out(file, fh, arg);
case V4L2_BUF_TYPE_SDR_CAPTURE:
if (unlikely(!ops->vidioc_s_fmt_sdr_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.sdr);
+ CLEAR_AFTER_FIELD(p, fmt.sdr.buffersize);
return ops->vidioc_s_fmt_sdr_cap(file, fh, arg);
case V4L2_BUF_TYPE_SDR_OUTPUT:
if (unlikely(!ops->vidioc_s_fmt_sdr_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.sdr);
+ CLEAR_AFTER_FIELD(p, fmt.sdr.buffersize);
return ops->vidioc_s_fmt_sdr_out(file, fh, arg);
case V4L2_BUF_TYPE_META_CAPTURE:
if (unlikely(!ops->vidioc_s_fmt_meta_cap))
@@ -1583,12 +1583,12 @@ static int v4l_try_fmt(const struct v4l2
case V4L2_BUF_TYPE_VBI_CAPTURE:
if (unlikely(!ops->vidioc_try_fmt_vbi_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.vbi);
+ CLEAR_AFTER_FIELD(p, fmt.vbi.flags);
return ops->vidioc_try_fmt_vbi_cap(file, fh, arg);
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
if (unlikely(!ops->vidioc_try_fmt_sliced_vbi_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.sliced);
+ CLEAR_AFTER_FIELD(p, fmt.sliced.io_size);
return ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, arg);
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
if (unlikely(!ops->vidioc_try_fmt_vid_out))
@@ -1611,22 +1611,22 @@ static int v4l_try_fmt(const struct v4l2
case V4L2_BUF_TYPE_VBI_OUTPUT:
if (unlikely(!ops->vidioc_try_fmt_vbi_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.vbi);
+ CLEAR_AFTER_FIELD(p, fmt.vbi.flags);
return ops->vidioc_try_fmt_vbi_out(file, fh, arg);
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
if (unlikely(!ops->vidioc_try_fmt_sliced_vbi_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.sliced);
+ CLEAR_AFTER_FIELD(p, fmt.sliced.io_size);
return ops->vidioc_try_fmt_sliced_vbi_out(file, fh, arg);
case V4L2_BUF_TYPE_SDR_CAPTURE:
if (unlikely(!ops->vidioc_try_fmt_sdr_cap))
break;
- CLEAR_AFTER_FIELD(p, fmt.sdr);
+ CLEAR_AFTER_FIELD(p, fmt.sdr.buffersize);
return ops->vidioc_try_fmt_sdr_cap(file, fh, arg);
case V4L2_BUF_TYPE_SDR_OUTPUT:
if (unlikely(!ops->vidioc_try_fmt_sdr_out))
break;
- CLEAR_AFTER_FIELD(p, fmt.sdr);
+ CLEAR_AFTER_FIELD(p, fmt.sdr.buffersize);
return ops->vidioc_try_fmt_sdr_out(file, fh, arg);
case V4L2_BUF_TYPE_META_CAPTURE:
if (unlikely(!ops->vidioc_try_fmt_meta_cap))
From: Kadlecsik József <[email protected]>
commit 32c72165dbd0e246e69d16a3ad348a4851afd415 upstream.
The bitmap allocation did not use full unsigned long sizes
when calculating the required size and that was triggered by KASAN
as slab-out-of-bounds read in several places. The patch fixes all
of them.
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netfilter/ipset/ip_set.h | 7 -------
net/netfilter/ipset/ip_set_bitmap_gen.h | 2 +-
net/netfilter/ipset/ip_set_bitmap_ip.c | 6 +++---
net/netfilter/ipset/ip_set_bitmap_ipmac.c | 6 +++---
net/netfilter/ipset/ip_set_bitmap_port.c | 6 +++---
5 files changed, 10 insertions(+), 17 deletions(-)
--- a/include/linux/netfilter/ipset/ip_set.h
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -445,13 +445,6 @@ ip6addrptr(const struct sk_buff *skb, bo
sizeof(*addr));
}
-/* Calculate the bytes required to store the inclusive range of a-b */
-static inline int
-bitmap_bytes(u32 a, u32 b)
-{
- return 4 * ((((b - a + 8) / 8) + 3) / 4);
-}
-
#include <linux/netfilter/ipset/ip_set_timeout.h>
#include <linux/netfilter/ipset/ip_set_comment.h>
#include <linux/netfilter/ipset/ip_set_counter.h>
--- a/net/netfilter/ipset/ip_set_bitmap_gen.h
+++ b/net/netfilter/ipset/ip_set_bitmap_gen.h
@@ -79,7 +79,7 @@ mtype_flush(struct ip_set *set)
if (set->extensions & IPSET_EXT_DESTROY)
mtype_ext_cleanup(set);
- memset(map->members, 0, map->memsize);
+ bitmap_zero(map->members, map->elements);
set->elements = 0;
set->ext_size = 0;
}
--- a/net/netfilter/ipset/ip_set_bitmap_ip.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ip.c
@@ -40,7 +40,7 @@ MODULE_ALIAS("ip_set_bitmap:ip");
/* Type structure */
struct bitmap_ip {
- void *members; /* the set members */
+ unsigned long *members; /* the set members */
u32 first_ip; /* host byte order, included in range */
u32 last_ip; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
@@ -222,7 +222,7 @@ init_map_ip(struct ip_set *set, struct b
u32 first_ip, u32 last_ip,
u32 elements, u32 hosts, u8 netmask)
{
- map->members = ip_set_alloc(map->memsize);
+ map->members = bitmap_zalloc(elements, GFP_KERNEL | __GFP_NOWARN);
if (!map->members)
return false;
map->first_ip = first_ip;
@@ -315,7 +315,7 @@ bitmap_ip_create(struct net *net, struct
if (!map)
return -ENOMEM;
- map->memsize = bitmap_bytes(0, elements - 1);
+ map->memsize = BITS_TO_LONGS(elements) * sizeof(unsigned long);
set->variant = &bitmap_ip;
if (!init_map_ip(set, map, first_ip, last_ip,
elements, hosts, netmask)) {
--- a/net/netfilter/ipset/ip_set_bitmap_ipmac.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
@@ -46,7 +46,7 @@ enum {
/* Type structure */
struct bitmap_ipmac {
- void *members; /* the set members */
+ unsigned long *members; /* the set members */
u32 first_ip; /* host byte order, included in range */
u32 last_ip; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
@@ -299,7 +299,7 @@ static bool
init_map_ipmac(struct ip_set *set, struct bitmap_ipmac *map,
u32 first_ip, u32 last_ip, u32 elements)
{
- map->members = ip_set_alloc(map->memsize);
+ map->members = bitmap_zalloc(elements, GFP_KERNEL | __GFP_NOWARN);
if (!map->members)
return false;
map->first_ip = first_ip;
@@ -363,7 +363,7 @@ bitmap_ipmac_create(struct net *net, str
if (!map)
return -ENOMEM;
- map->memsize = bitmap_bytes(0, elements - 1);
+ map->memsize = BITS_TO_LONGS(elements) * sizeof(unsigned long);
set->variant = &bitmap_ipmac;
if (!init_map_ipmac(set, map, first_ip, last_ip, elements)) {
kfree(map);
--- a/net/netfilter/ipset/ip_set_bitmap_port.c
+++ b/net/netfilter/ipset/ip_set_bitmap_port.c
@@ -34,7 +34,7 @@ MODULE_ALIAS("ip_set_bitmap:port");
/* Type structure */
struct bitmap_port {
- void *members; /* the set members */
+ unsigned long *members; /* the set members */
u16 first_port; /* host byte order, included in range */
u16 last_port; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
@@ -207,7 +207,7 @@ static bool
init_map_port(struct ip_set *set, struct bitmap_port *map,
u16 first_port, u16 last_port)
{
- map->members = ip_set_alloc(map->memsize);
+ map->members = bitmap_zalloc(map->elements, GFP_KERNEL | __GFP_NOWARN);
if (!map->members)
return false;
map->first_port = first_port;
@@ -250,7 +250,7 @@ bitmap_port_create(struct net *net, stru
return -ENOMEM;
map->elements = elements;
- map->memsize = bitmap_bytes(0, map->elements);
+ map->memsize = BITS_TO_LONGS(elements) * sizeof(unsigned long);
set->variant = &bitmap_port;
if (!init_map_port(set, map, first_port, last_port)) {
kfree(map);
From: Wen Huang <[email protected]>
commit e5e884b42639c74b5b57dc277909915c0aefc8bb upstream.
add_ie_rates() copys rates without checking the length
in bss descriptor from remote AP.when victim connects to
remote attacker, this may trigger buffer overflow.
lbs_ibss_join_existing() copys rates without checking the length
in bss descriptor from remote IBSS node.when victim connects to
remote attacker, this may trigger buffer overflow.
Fix them by putting the length check before performing copy.
This fix addresses CVE-2019-14896 and CVE-2019-14897.
This also fix build warning of mixed declarations and code.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Wen Huang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/libertas/cfg.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/marvell/libertas/cfg.c
+++ b/drivers/net/wireless/marvell/libertas/cfg.c
@@ -273,6 +273,10 @@ add_ie_rates(u8 *tlv, const u8 *ie, int
int hw, ap, ap_max = ie[1];
u8 hw_rate;
+ if (ap_max > MAX_RATES) {
+ lbs_deb_assoc("invalid rates\n");
+ return tlv;
+ }
/* Advance past IE header */
ie += 2;
@@ -1720,6 +1724,9 @@ static int lbs_ibss_join_existing(struct
struct cmd_ds_802_11_ad_hoc_join cmd;
u8 preamble = RADIO_PREAMBLE_SHORT;
int ret = 0;
+ int hw, i;
+ u8 rates_max;
+ u8 *rates;
/* TODO: set preamble based on scan result */
ret = lbs_set_radio(priv, preamble, 1);
@@ -1778,9 +1785,12 @@ static int lbs_ibss_join_existing(struct
if (!rates_eid) {
lbs_add_rates(cmd.bss.rates);
} else {
- int hw, i;
- u8 rates_max = rates_eid[1];
- u8 *rates = cmd.bss.rates;
+ rates_max = rates_eid[1];
+ if (rates_max > MAX_RATES) {
+ lbs_deb_join("invalid rates");
+ goto out;
+ }
+ rates = cmd.bss.rates;
for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
u8 hw_rate = lbs_rates[hw].bitrate / 5;
for (i = 0; i < rates_max; i++) {
From: Stephan Gerhold <[email protected]>
commit 996d5d5f89a558a3608a46e73ccd1b99f1b1d058 upstream.
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted
to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.
Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/pm8xxx-vibrator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -98,7 +98,7 @@ static int pm8xxx_vib_set(struct pm8xxx_
if (regs->enable_mask)
rc = regmap_update_bits(vib->regmap, regs->enable_addr,
- on ? regs->enable_mask : 0, val);
+ regs->enable_mask, on ? ~0 : 0);
return rc;
}
From: Johan Hovold <[email protected]>
commit 6b32391ed675827f8425a414abbc6fbd54ea54fe upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
This in turn could cause the driver to misbehave or trigger a WARN() in
usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)")
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Vladis Dronov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/sur40.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -537,7 +537,7 @@ static int sur40_probe(struct usb_interf
int error;
/* Check if we really have the right interface. */
- iface_desc = &interface->altsetting[0];
+ iface_desc = interface->cur_altsetting;
if (iface_desc->desc.bInterfaceClass != 0xFF)
return -ENODEV;
From: Cong Wang <[email protected]>
[ Upstream commit 61678d28d4a45ef376f5d02a839cc37509ae9281 ]
syzbot reported an out-of-bound access in em_nbyte. As initially
analyzed by Eric, this is because em_nbyte sets its own em->datalen
in em_nbyte_change() other than the one specified by user, but this
value gets overwritten later by its caller tcf_em_validate().
We should leave em->datalen untouched to respect their choices.
I audit all the in-tree ematch users, all of those implement
->change() set em->datalen, so we can just avoid setting it twice
in this case.
Reported-and-tested-by: [email protected]
Reported-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/ematch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sched/ematch.c
+++ b/net/sched/ematch.c
@@ -267,12 +267,12 @@ static int tcf_em_validate(struct tcf_pr
}
em->data = (unsigned long) v;
}
+ em->datalen = data_len;
}
}
em->matchid = em_hdr->matchid;
em->flags = em_hdr->flags;
- em->datalen = data_len;
em->net = net;
err = 0;
From: Jouni Hogander <[email protected]>
commit e0b60903b434a7ee21ba8d8659f207ed84101e89 upstream.
Dev_hold has to be called always in netdev_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: Hulk Robot <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: David Miller <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net-sysfs.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1324,14 +1324,17 @@ static int netdev_queue_add_kobject(stru
struct kobject *kobj = &queue->kobj;
int error = 0;
+ /* Kobject_put later will trigger netdev_queue_release call
+ * which decreases dev refcount: Take that reference here
+ */
+ dev_hold(queue->dev);
+
kobj->kset = dev->queues_kset;
error = kobject_init_and_add(kobj, &netdev_queue_ktype, NULL,
"tx-%u", index);
if (error)
goto err;
- dev_hold(queue->dev);
-
#ifdef CONFIG_BQL
error = sysfs_create_group(kobj, &dql_group);
if (error)
From: Michał Mirosław <[email protected]>
commit f571389c0b015e76f91c697c4c1700aba860d34f upstream.
Commit 7ad2ed1dfcbe inadvertently mixed up a quirk flag's name and
broke SDR50 tuning override. Use correct NVQUIRK_ name.
Fixes: 7ad2ed1dfcbe ("mmc: tegra: enable UHS-I modes")
Cc: <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Tested-by: Thierry Reding <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>
Link: https://lore.kernel.org/r/9aff1d859935e59edd81e4939e40d6c55e0b55f6.1578390388.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -177,7 +177,7 @@ static void tegra_sdhci_reset(struct sdh
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
- if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
+ if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
}
From: Johan Hovold <[email protected]>
commit ba9a103f40fc4a3ec7558ec9b0b97d4f92034249 upstream.
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote")
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Cc: stable <[email protected]> # 2.6.13
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/misc/keyspan_remote.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -344,7 +344,8 @@ static int keyspan_setup(struct usb_devi
int retval = 0;
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
+ 0x11, 0x40, 0x5601, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
__func__, retval);
@@ -352,7 +353,8 @@ static int keyspan_setup(struct usb_devi
}
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
+ 0x44, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
__func__, retval);
@@ -360,7 +362,8 @@ static int keyspan_setup(struct usb_devi
}
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
+ 0x22, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
__func__, retval);
From: Hans Verkuil <[email protected]>
commit 8ff771f8c8d55d95f102cf88a970e541a8bd6bcf upstream.
This reverts commit a284e11c371e446371675668d8c8120a27227339.
This causes problems (drifting cursor) with at least the F11 function that
reads more than 32 bytes.
The real issue is in the F54 driver, and so this should be fixed there, and
not in rmi_smbus.c.
So first revert this bad commit, then fix the real problem in F54 in another
patch.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: Timo Kaufmann <[email protected]>
Fixes: a284e11c371e ("Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/rmi4/rmi_smbus.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -166,6 +166,7 @@ static int rmi_smb_write_block(struct rm
/* prepare to write next block of bytes */
cur_len -= SMB_MAX_COUNT;
databuff += SMB_MAX_COUNT;
+ rmiaddr += SMB_MAX_COUNT;
}
exit:
mutex_unlock(&rmi_smb->page_mutex);
@@ -217,6 +218,7 @@ static int rmi_smb_read_block(struct rmi
/* prepare to read next block of bytes */
cur_len -= SMB_MAX_COUNT;
databuff += SMB_MAX_COUNT;
+ rmiaddr += SMB_MAX_COUNT;
}
retval = 0;
From: Guenter Roeck <[email protected]>
commit 3bf8bdcf3bada771eb12b57f2a30caee69e8ab8d upstream.
The hwmon core uses device managed functions, tied to the hwmon parent
device, for various internal memory allocations. This is problematic
since hwmon device lifetime does not necessarily match its parent's
device lifetime. If there is a mismatch, memory leaks will accumulate
until the parent device is released.
Fix the problem by managing all memory allocations internally. The only
exception is memory allocation for thermal device registration, which
can be tied to the hwmon device, along with thermal device registration
itself.
Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API")
Cc: [email protected] # v4.14.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem
Cc: [email protected] # v4.14.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register()
Cc: [email protected] # v4.9.x: 3a412d5e4a1c: hwmon: (core) Simplify sysfs attribute name allocation
Cc: [email protected] # v4.9.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem
Cc: [email protected] # v4.9.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register()
Cc: [email protected] # v4.9+
Cc: Martin K. Petersen <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/hwmon.c | 68 ++++++++++++++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 27 deletions(-)
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -51,6 +51,7 @@ struct hwmon_device_attribute {
#define to_hwmon_attr(d) \
container_of(d, struct hwmon_device_attribute, dev_attr)
+#define to_dev_attr(a) container_of(a, struct device_attribute, attr)
/*
* Thermal zone information
@@ -58,7 +59,7 @@ struct hwmon_device_attribute {
* also provides the sensor index.
*/
struct hwmon_thermal_data {
- struct hwmon_device *hwdev; /* Reference to hwmon device */
+ struct device *dev; /* Reference to hwmon device */
int index; /* sensor index */
};
@@ -95,9 +96,27 @@ static const struct attribute_group *hwm
NULL
};
+static void hwmon_free_attrs(struct attribute **attrs)
+{
+ int i;
+
+ for (i = 0; attrs[i]; i++) {
+ struct device_attribute *dattr = to_dev_attr(attrs[i]);
+ struct hwmon_device_attribute *hattr = to_hwmon_attr(dattr);
+
+ kfree(hattr);
+ }
+ kfree(attrs);
+}
+
static void hwmon_dev_release(struct device *dev)
{
- kfree(to_hwmon_device(dev));
+ struct hwmon_device *hwdev = to_hwmon_device(dev);
+
+ if (hwdev->group.attrs)
+ hwmon_free_attrs(hwdev->group.attrs);
+ kfree(hwdev->groups);
+ kfree(hwdev);
}
static struct class hwmon_class = {
@@ -121,11 +140,11 @@ static DEFINE_IDA(hwmon_ida);
static int hwmon_thermal_get_temp(void *data, int *temp)
{
struct hwmon_thermal_data *tdata = data;
- struct hwmon_device *hwdev = tdata->hwdev;
+ struct hwmon_device *hwdev = to_hwmon_device(tdata->dev);
int ret;
long t;
- ret = hwdev->chip->ops->read(&hwdev->dev, hwmon_temp, hwmon_temp_input,
+ ret = hwdev->chip->ops->read(tdata->dev, hwmon_temp, hwmon_temp_input,
tdata->index, &t);
if (ret < 0)
return ret;
@@ -139,8 +158,7 @@ static const struct thermal_zone_of_devi
.get_temp = hwmon_thermal_get_temp,
};
-static int hwmon_thermal_add_sensor(struct device *dev,
- struct hwmon_device *hwdev, int index)
+static int hwmon_thermal_add_sensor(struct device *dev, int index)
{
struct hwmon_thermal_data *tdata;
struct thermal_zone_device *tzd;
@@ -149,10 +167,10 @@ static int hwmon_thermal_add_sensor(stru
if (!tdata)
return -ENOMEM;
- tdata->hwdev = hwdev;
+ tdata->dev = dev;
tdata->index = index;
- tzd = devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata,
+ tzd = devm_thermal_zone_of_sensor_register(dev, index, tdata,
&hwmon_thermal_ops);
/*
* If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
@@ -164,8 +182,7 @@ static int hwmon_thermal_add_sensor(stru
return 0;
}
#else
-static int hwmon_thermal_add_sensor(struct device *dev,
- struct hwmon_device *hwdev, int index)
+static int hwmon_thermal_add_sensor(struct device *dev, int index)
{
return 0;
}
@@ -242,8 +259,7 @@ static bool is_string_attr(enum hwmon_se
(type == hwmon_fan && attr == hwmon_fan_label);
}
-static struct attribute *hwmon_genattr(struct device *dev,
- const void *drvdata,
+static struct attribute *hwmon_genattr(const void *drvdata,
enum hwmon_sensor_types type,
u32 attr,
int index,
@@ -271,7 +287,7 @@ static struct attribute *hwmon_genattr(s
if ((mode & S_IWUGO) && !ops->write)
return ERR_PTR(-EINVAL);
- hattr = devm_kzalloc(dev, sizeof(*hattr), GFP_KERNEL);
+ hattr = kzalloc(sizeof(*hattr), GFP_KERNEL);
if (!hattr)
return ERR_PTR(-ENOMEM);
@@ -474,8 +490,7 @@ static int hwmon_num_channel_attrs(const
return n;
}
-static int hwmon_genattrs(struct device *dev,
- const void *drvdata,
+static int hwmon_genattrs(const void *drvdata,
struct attribute **attrs,
const struct hwmon_ops *ops,
const struct hwmon_channel_info *info)
@@ -501,7 +516,7 @@ static int hwmon_genattrs(struct device
attr_mask &= ~BIT(attr);
if (attr >= template_size)
return -EINVAL;
- a = hwmon_genattr(dev, drvdata, info->type, attr, i,
+ a = hwmon_genattr(drvdata, info->type, attr, i,
templates[attr], ops);
if (IS_ERR(a)) {
if (PTR_ERR(a) != -ENOENT)
@@ -515,8 +530,7 @@ static int hwmon_genattrs(struct device
}
static struct attribute **
-__hwmon_create_attrs(struct device *dev, const void *drvdata,
- const struct hwmon_chip_info *chip)
+__hwmon_create_attrs(const void *drvdata, const struct hwmon_chip_info *chip)
{
int ret, i, aindex = 0, nattrs = 0;
struct attribute **attrs;
@@ -527,15 +541,17 @@ __hwmon_create_attrs(struct device *dev,
if (nattrs == 0)
return ERR_PTR(-EINVAL);
- attrs = devm_kcalloc(dev, nattrs + 1, sizeof(*attrs), GFP_KERNEL);
+ attrs = kcalloc(nattrs + 1, sizeof(*attrs), GFP_KERNEL);
if (!attrs)
return ERR_PTR(-ENOMEM);
for (i = 0; chip->info[i]; i++) {
- ret = hwmon_genattrs(dev, drvdata, &attrs[aindex], chip->ops,
+ ret = hwmon_genattrs(drvdata, &attrs[aindex], chip->ops,
chip->info[i]);
- if (ret < 0)
+ if (ret < 0) {
+ hwmon_free_attrs(attrs);
return ERR_PTR(ret);
+ }
aindex += ret;
}
@@ -577,14 +593,13 @@ __hwmon_device_register(struct device *d
for (i = 0; groups[i]; i++)
ngroups++;
- hwdev->groups = devm_kcalloc(dev, ngroups, sizeof(*groups),
- GFP_KERNEL);
+ hwdev->groups = kcalloc(ngroups, sizeof(*groups), GFP_KERNEL);
if (!hwdev->groups) {
err = -ENOMEM;
goto free_hwmon;
}
- attrs = __hwmon_create_attrs(dev, drvdata, chip);
+ attrs = __hwmon_create_attrs(drvdata, chip);
if (IS_ERR(attrs)) {
err = PTR_ERR(attrs);
goto free_hwmon;
@@ -629,8 +644,7 @@ __hwmon_device_register(struct device *d
hwmon_temp_input, j))
continue;
if (info[i]->config[j] & HWMON_T_INPUT) {
- err = hwmon_thermal_add_sensor(dev,
- hwdev, j);
+ err = hwmon_thermal_add_sensor(hdev, j);
if (err) {
device_unregister(hdev);
goto ida_remove;
@@ -643,7 +657,7 @@ __hwmon_device_register(struct device *d
return hdev;
free_hwmon:
- kfree(hwdev);
+ hwmon_dev_release(hdev);
ida_remove:
ida_simple_remove(&hwmon_ida, id);
return ERR_PTR(err);
From: Linus Walleij <[email protected]>
commit 47c332deb8e89f6c59b0bb2615945c6e7fad1a60 upstream.
If the thermal subsystem returne -EPROBE_DEFER or any other error
when hwmon calls devm_thermal_zone_of_sensor_register(), this is
silently ignored.
I ran into this with an incorrectly defined thermal zone, making
it non-existing and thus this call failed with -EPROBE_DEFER
assuming it would appear later. The sensor was still added
which is incorrect: sensors must strictly be added after the
thermal zones, so deferred probe must be respected.
Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API")
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/hwmon.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -143,6 +143,7 @@ static int hwmon_thermal_add_sensor(stru
struct hwmon_device *hwdev, int index)
{
struct hwmon_thermal_data *tdata;
+ struct thermal_zone_device *tzd;
tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL);
if (!tdata)
@@ -151,8 +152,14 @@ static int hwmon_thermal_add_sensor(stru
tdata->hwdev = hwdev;
tdata->index = index;
- devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata,
- &hwmon_thermal_ops);
+ tzd = devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata,
+ &hwmon_thermal_ops);
+ /*
+ * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
+ * so ignore that error but forward any other error.
+ */
+ if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV))
+ return PTR_ERR(tzd);
return 0;
}
@@ -621,14 +628,20 @@ __hwmon_device_register(struct device *d
if (!chip->ops->is_visible(drvdata, hwmon_temp,
hwmon_temp_input, j))
continue;
- if (info[i]->config[j] & HWMON_T_INPUT)
- hwmon_thermal_add_sensor(dev, hwdev, j);
+ if (info[i]->config[j] & HWMON_T_INPUT) {
+ err = hwmon_thermal_add_sensor(dev,
+ hwdev, j);
+ if (err)
+ goto free_device;
+ }
}
}
}
return hdev;
+free_device:
+ device_unregister(hdev);
free_hwmon:
kfree(hwdev);
ida_remove:
From: William Dauchy <[email protected]>
[ Upstream commit d0f418516022c32ecceaf4275423e5bd3f8743a9 ]
in the same manner as commit 690afc165bb3 ("net: ip6_gre: fix moving
ip6gre between namespaces"), fix namespace moving as it was broken since
commit 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.").
Indeed, the ip6_gre commit removed the local flag for collect_md
condition, so there is no reason to keep it for ip_gre/ip_tunnel.
this patch will fix both ip_tunnel and ip_gre modules.
Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: William Dauchy <[email protected]>
Acked-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_tunnel.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -1202,10 +1202,8 @@ int ip_tunnel_init(struct net_device *de
iph->version = 4;
iph->ihl = 5;
- if (tunnel->collect_md) {
- dev->features |= NETIF_F_NETNS_LOCAL;
+ if (tunnel->collect_md)
netif_keep_dst(dev);
- }
return 0;
}
EXPORT_SYMBOL_GPL(ip_tunnel_init);
On 1/28/20 6:57 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.169 release.
> There are 46 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.169-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, 28 Jan 2020 at 19:28, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.169 release.
> There are 46 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.169-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
NOTE:
LTP fs test read_all_proc fails intermittently on 4.9 and 4.14 branches.
Summary
------------------------------------------------------------------------
kernel: 4.14.169-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 5986a79ae28421d7027cb4ab78fba7d787a9f06e
git describe: v4.14.168-47-g5986a79ae284
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.168-47-g5986a79ae284
No regressions (compared to build v4.14.168)
No fixes (compared to build v4.14.168)
Ran 24221 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 28/01/2020 13:57, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.169 release.
> There are 46 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.169-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.14.169-rc1-g5986a79ae284
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Tue, Jan 28, 2020 at 02:57:34PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.169 release.
> There are 46 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Jan 2020 13:57:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 374 pass: 374 fail: 0
Guenter