2020-09-10 21:23:19

by Shengjiu Wang

[permalink] [raw]
Subject: [PATCH] ASoC: ak4458: Add DSD support for ak4458 and ak4497

ak4458 can't support DSD512 format, but ak4497 can, so add
a new variable in ak4458_drvdata to distinguish these two
platform.

In hw_params(), calculate bit clock according to different DSD
format and configure DSD register.

Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/codecs/ak4458.c | 82 +++++++++++++++++++++++++++++++++++----
sound/soc/codecs/ak4458.h | 5 ++-
2 files changed, 79 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c
index 763e6839428f..9054964d5cfa 100644
--- a/sound/soc/codecs/ak4458.c
+++ b/sound/soc/codecs/ak4458.c
@@ -31,11 +31,13 @@ static const char *ak4458_supply_names[AK4458_NUM_SUPPLIES] = {
struct ak4458_drvdata {
struct snd_soc_dai_driver *dai_drv;
const struct snd_soc_component_driver *comp_drv;
+ bool dsd512; /* DSD512 is supported or not */
};

/* AK4458 Codec Private Data */
struct ak4458_priv {
struct regulator_bulk_data supplies[AK4458_NUM_SUPPLIES];
+ const struct ak4458_drvdata *drvdata;
struct device *dev;
struct regmap *regmap;
struct gpio_desc *reset_gpiod;
@@ -136,6 +138,10 @@ static const char * const ak4458_ats_select_texts[] = {
/* DIF2 bit Audio Interface Format Setting(BICK fs) */
static const char * const ak4458_dif_select_texts[] = {"32fs,48fs", "64fs",};

+/* DSD input pin select */
+static const char * const ak4497_dsd_input_path_select[] = {
+ "16_17_19pin", "3_4_5pin"};
+
static const struct soc_enum ak4458_dac1_dem_enum =
SOC_ENUM_SINGLE(AK4458_01_CONTROL2, 1,
ARRAY_SIZE(ak4458_dem_select_texts),
@@ -175,6 +181,10 @@ static const struct soc_enum ak4458_dif_enum =
SOC_ENUM_SINGLE(AK4458_00_CONTROL1, 3,
ARRAY_SIZE(ak4458_dif_select_texts),
ak4458_dif_select_texts);
+static const struct soc_enum ak4497_dsdp_enum =
+ SOC_ENUM_SINGLE(AK4458_09_DSD2, 2,
+ ARRAY_SIZE(ak4497_dsd_input_path_select),
+ ak4497_dsd_input_path_select);

static int get_digfil(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
@@ -282,6 +292,7 @@ static const struct snd_kcontrol_new ak4497_snd_controls[] = {
SOC_ENUM("AK4497 Sound Mode", ak4458_sm_enum),
SOC_ENUM("AK4497 Attenuation transition Time Setting",
ak4458_ats_enum),
+ SOC_ENUM("AK4497 DSD Data Input Pin", ak4497_dsdp_enum),
};

/* ak4497 dapm widgets */
@@ -325,12 +336,54 @@ static int ak4458_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_component *component = dai->component;
struct ak4458_priv *ak4458 = snd_soc_component_get_drvdata(component);
int pcm_width = max(params_physical_width(params), ak4458->slot_width);
- int nfs1;
- u8 format;
+ u8 format, dsdsel0, dsdsel1;
+ int nfs1, dsd_bclk;

nfs1 = params_rate(params);
ak4458->fs = nfs1;

+ /* calculate bit clock */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_DSD_U8:
+ case SNDRV_PCM_FORMAT_DSD_U16_LE:
+ case SNDRV_PCM_FORMAT_DSD_U16_BE:
+ case SNDRV_PCM_FORMAT_DSD_U32_LE:
+ case SNDRV_PCM_FORMAT_DSD_U32_BE:
+ dsd_bclk = nfs1 * params_physical_width(params);
+ switch (dsd_bclk) {
+ case 2822400:
+ dsdsel0 = 0;
+ dsdsel1 = 0;
+ break;
+ case 5644800:
+ dsdsel0 = 1;
+ dsdsel1 = 0;
+ break;
+ case 11289600:
+ dsdsel0 = 0;
+ dsdsel1 = 1;
+ break;
+ case 22579200:
+ if (ak4458->drvdata->dsd512) {
+ dsdsel0 = 1;
+ dsdsel1 = 1;
+ } else {
+ dev_err(dai->dev, "DSD512 not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(dai->dev, "Unsupported dsd bclk.\n");
+ return -EINVAL;
+ }
+
+ snd_soc_component_update_bits(component, AK4458_06_DSD1,
+ AK4458_DSDSEL_MASK, dsdsel0);
+ snd_soc_component_update_bits(component, AK4458_09_DSD2,
+ AK4458_DSDSEL_MASK, dsdsel1);
+ break;
+ }
+
/* Master Clock Frequency Auto Setting Mode Enable */
snd_soc_component_update_bits(component, AK4458_00_CONTROL1, 0x80, 0x80);

@@ -355,6 +408,9 @@ static int ak4458_hw_params(struct snd_pcm_substream *substream,
case SND_SOC_DAIFMT_DSP_B:
format = AK4458_DIF_32BIT_MSB;
break;
+ case SND_SOC_DAIFMT_PDM:
+ format = AK4458_DIF_32BIT_MSB;
+ break;
default:
return -EINVAL;
}
@@ -393,6 +449,7 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
case SND_SOC_DAIFMT_LEFT_J:
case SND_SOC_DAIFMT_RIGHT_J:
case SND_SOC_DAIFMT_DSP_B:
+ case SND_SOC_DAIFMT_PDM:
ak4458->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
break;
default:
@@ -401,6 +458,12 @@ static int ak4458_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL;
}

+ /* DSD mode */
+ snd_soc_component_update_bits(component, AK4458_02_CONTROL3,
+ AK4458_DP_MASK,
+ ak4458->fmt == SND_SOC_DAIFMT_PDM ?
+ AK4458_DP_MASK : 0);
+
ak4458_rstn_control(component, 0);
ak4458_rstn_control(component, 1);

@@ -472,7 +535,10 @@ static int ak4458_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,

#define AK4458_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
SNDRV_PCM_FMTBIT_S24_LE |\
- SNDRV_PCM_FMTBIT_S32_LE)
+ SNDRV_PCM_FMTBIT_S32_LE |\
+ SNDRV_PCM_FMTBIT_DSD_U8 |\
+ SNDRV_PCM_FMTBIT_DSD_U16_LE |\
+ SNDRV_PCM_FMTBIT_DSD_U32_LE)

static const unsigned int ak4458_rates[] = {
8000, 11025, 16000, 22050,
@@ -668,11 +734,13 @@ static const struct regmap_config ak4458_regmap = {
static const struct ak4458_drvdata ak4458_drvdata = {
.dai_drv = &ak4458_dai,
.comp_drv = &soc_codec_dev_ak4458,
+ .dsd512 = false,
};

static const struct ak4458_drvdata ak4497_drvdata = {
.dai_drv = &ak4497_dai,
.comp_drv = &soc_codec_dev_ak4497,
+ .dsd512 = true,
};

static const struct dev_pm_ops ak4458_pm = {
@@ -684,7 +752,6 @@ static const struct dev_pm_ops ak4458_pm = {
static int ak4458_i2c_probe(struct i2c_client *i2c)
{
struct ak4458_priv *ak4458;
- const struct ak4458_drvdata *drvdata;
int ret, i;

ak4458 = devm_kzalloc(&i2c->dev, sizeof(*ak4458), GFP_KERNEL);
@@ -698,7 +765,7 @@ static int ak4458_i2c_probe(struct i2c_client *i2c)
i2c_set_clientdata(i2c, ak4458);
ak4458->dev = &i2c->dev;

- drvdata = of_device_get_match_data(&i2c->dev);
+ ak4458->drvdata = of_device_get_match_data(&i2c->dev);

ak4458->reset_gpiod = devm_gpiod_get_optional(ak4458->dev, "reset",
GPIOD_OUT_LOW);
@@ -720,8 +787,9 @@ static int ak4458_i2c_probe(struct i2c_client *i2c)
return ret;
}

- ret = devm_snd_soc_register_component(ak4458->dev, drvdata->comp_drv,
- drvdata->dai_drv, 1);
+ ret = devm_snd_soc_register_component(ak4458->dev,
+ ak4458->drvdata->comp_drv,
+ ak4458->drvdata->dai_drv, 1);
if (ret < 0) {
dev_err(ak4458->dev, "Failed to register CODEC: %d\n", ret);
return ret;
diff --git a/sound/soc/codecs/ak4458.h b/sound/soc/codecs/ak4458.h
index f906215f7e4e..9548c5d78621 100644
--- a/sound/soc/codecs/ak4458.h
+++ b/sound/soc/codecs/ak4458.h
@@ -83,4 +83,7 @@
#define AK4458_ATS_SHIFT 6
#define AK4458_ATS_MASK GENMASK(7, 6)

-#endif /* _AK4458_H */
+#define AK4458_DSDSEL_MASK (0x1 << 0)
+#define AK4458_DP_MASK (0x1 << 7)
+
+#endif
--
2.27.0


2020-09-10 21:29:28

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH] ASoC: ak4458: Add DSD support for ak4458 and ak4497

On Thu, Sep 10, 2020 at 10:10:32PM +0800, Shengjiu Wang wrote:

> ak4458 can't support DSD512 format, but ak4497 can, so add
> a new variable in ak4458_drvdata to distinguish these two
> platform.

> In hw_params(), calculate bit clock according to different DSD
> format and configure DSD register.

> + SOC_ENUM("AK4497 DSD Data Input Pin", ak4497_dsdp_enum),

This control name doesn't seem to match up with the description - it's
talking about a pin but the description sounds like setting a different
format for the data?


Attachments:
(No filename) (541.00 B)
signature.asc (499.00 B)
Download all attachments

2020-09-11 08:20:49

by Shengjiu Wang

[permalink] [raw]
Subject: Re: [PATCH] ASoC: ak4458: Add DSD support for ak4458 and ak4497

On Thu, Sep 10, 2020 at 10:23 PM Mark Brown <[email protected]> wrote:
>
> On Thu, Sep 10, 2020 at 10:10:32PM +0800, Shengjiu Wang wrote:
>
> > ak4458 can't support DSD512 format, but ak4497 can, so add
> > a new variable in ak4458_drvdata to distinguish these two
> > platform.
>
> > In hw_params(), calculate bit clock according to different DSD
> > format and configure DSD register.
>
> > + SOC_ENUM("AK4497 DSD Data Input Pin", ak4497_dsdp_enum),
>
> This control name doesn't seem to match up with the description - it's
> talking about a pin but the description sounds like setting a different
> format for the data?

I will add more description. Thanks.

best regards
wang shengjiu