From: Guo Ren <[email protected]>
[ Upstream commit bc6717d55d07110d8f3c6d31ec2af50c11b07091 ]
When the timer counts to the upper limit, an overflow interrupt is
generated, and the count is reset with the value in the TIME_INI
register. But the software expects to start counting from 0 when
the count overflows, so it forces TIME_INI to 0 to solve the
potential interrupt storm problem.
Signed-off-by: Guo Ren <[email protected]>
Tested-by: Xu Kai <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-gx6605s.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c
index 80d0939d040b5..8d386adbe8009 100644
--- a/drivers/clocksource/timer-gx6605s.c
+++ b/drivers/clocksource/timer-gx6605s.c
@@ -28,6 +28,7 @@ static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
+ writel_relaxed(0, base + TIMER_INI);
ce->event_handler(ce);
--
2.25.1
From: Hans de Goede <[email protected]>
[ Upstream commit 9d682ea6bcc76b8b2691c79add59f7d99c881635 ]
Fix the check for the mainline vboxsf code being used with the old
mount.vboxsf mount binary from the out-of-tree vboxsf version doing
a comparison between signed and unsigned data types.
This fixes the following smatch warnings:
fs/vboxsf/super.c:390 vboxsf_parse_monolithic() warn: impossible condition '(options[1] == (255)) => ((-128)-127 == 255)'
fs/vboxsf/super.c:391 vboxsf_parse_monolithic() warn: impossible condition '(options[2] == (254)) => ((-128)-127 == 254)'
fs/vboxsf/super.c:392 vboxsf_parse_monolithic() warn: impossible condition '(options[3] == (253)) => ((-128)-127 == 253)'
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/vboxsf/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/vboxsf/super.c b/fs/vboxsf/super.c
index 8fe03b4a0d2b0..25aade3441922 100644
--- a/fs/vboxsf/super.c
+++ b/fs/vboxsf/super.c
@@ -384,7 +384,7 @@ static int vboxsf_setup(void)
static int vboxsf_parse_monolithic(struct fs_context *fc, void *data)
{
- char *options = data;
+ unsigned char *options = data;
if (options && options[0] == VBSF_MOUNT_SIGNATURE_BYTE_0 &&
options[1] == VBSF_MOUNT_SIGNATURE_BYTE_1 &&
--
2.25.1
From: "Naveen N. Rao" <[email protected]>
[ Upstream commit 21e9ba5373fc2cec608fd68301a1dbfd14df3172 ]
Ubuntu mainline builds for ppc64le are failing with the below error (*):
CALL /home/kernel/COD/linux/scripts/atomic/check-atomics.sh
DESCEND bpf/resolve_btfids
Auto-detecting system features:
... libelf: [ [32mon[m ]
... zlib: [ [32mon[m ]
... bpf: [ [31mOFF[m ]
BPF API too old
make[6]: *** [Makefile:295: bpfdep] Error 1
make[5]: *** [Makefile:54: /home/kernel/COD/linux/debian/build/build-generic/tools/bpf/resolve_btfids//libbpf.a] Error 2
make[4]: *** [Makefile:71: bpf/resolve_btfids] Error 2
make[3]: *** [/home/kernel/COD/linux/Makefile:1890: tools/bpf/resolve_btfids] Error 2
make[2]: *** [/home/kernel/COD/linux/Makefile:335: __build_one_by_one] Error 2
make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-generic'
make[1]: *** [Makefile:185: __sub-make] Error 2
make[1]: Leaving directory '/home/kernel/COD/linux'
resolve_btfids needs to be build as a host binary and it needs libbpf.
However, libbpf Makefile hardcodes an include path utilizing $(ARCH).
This results in mixing of cross-architecture headers resulting in a
build failure.
The specific header include path doesn't seem necessary for a libbpf
build. Hence, remove the same.
(*) https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9-rc3/ppc64el/log
Reported-by: Vaidyanathan Srinivasan <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index bf8ed134cb8a3..b78484e7a6089 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -59,7 +59,7 @@ FEATURE_USER = .libbpf
FEATURE_TESTS = libelf libelf-mmap zlib bpf reallocarray
FEATURE_DISPLAY = libelf zlib bpf
-INCLUDES = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(ARCH)/include/uapi -I$(srctree)/tools/include/uapi
+INCLUDES = -I. -I$(srctree)/tools/include -I$(srctree)/tools/include/uapi
FEATURE_CHECK_CFLAGS-bpf = $(INCLUDES)
check_feat := 1
--
2.25.1
From: Martin Cerveny <[email protected]>
[ Upstream commit 74ea06164cda81dc80e97790164ca533fd7e3087 ]
Better guess. Secondary CSC registers are from 0xF0000.
Signed-off-by: Martin Cerveny <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun8i_mixer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index cc4fb916318f3..c3304028e3dcd 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -307,7 +307,7 @@ static struct regmap_config sun8i_mixer_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = 0xbfffc, /* guessed */
+ .max_register = 0xffffc, /* guessed */
};
static int sun8i_mixer_of_get_id(struct device_node *node)
--
2.25.1
From: Dexuan Cui <[email protected]>
[ Upstream commit da26658c3d7005aa67a706dceff7b2807b59e123 ]
The previous change "hv_netvsc: Switch the data path at the right time
during hibernation" adds the call of netvsc_vf_changed() upon
NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message
when the VF is brought UP or DOWN.
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/hyperv_net.h | 3 +++
drivers/net/hyperv/netvsc_drv.c | 21 ++++++++++++++++++++-
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index abda736e7c7dc..a4d2dd2637e26 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -973,6 +973,9 @@ struct net_device_context {
/* Serial number of the VF to team with */
u32 vf_serial;
+ /* Is the current data path through the VF NIC? */
+ bool data_path_is_vf;
+
/* Used to temporarily save the config info across hibernation */
struct netvsc_device_info *saved_netvsc_dev_info;
};
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 8309194b351a9..329eff3250b23 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -2323,7 +2323,16 @@ static int netvsc_register_vf(struct net_device *vf_netdev)
return NOTIFY_OK;
}
-/* VF up/down change detected, schedule to change data path */
+/* Change the data path when VF UP/DOWN/CHANGE are detected.
+ *
+ * Typically a UP or DOWN event is followed by a CHANGE event, so
+ * net_device_ctx->data_path_is_vf is used to cache the current data path
+ * to avoid the duplicate call of netvsc_switch_datapath() and the duplicate
+ * message.
+ *
+ * During hibernation, if a VF NIC driver (e.g. mlx5) preserves the network
+ * interface, there is only the CHANGE event and no UP or DOWN event.
+ */
static int netvsc_vf_changed(struct net_device *vf_netdev)
{
struct net_device_context *net_device_ctx;
@@ -2340,6 +2349,10 @@ static int netvsc_vf_changed(struct net_device *vf_netdev)
if (!netvsc_dev)
return NOTIFY_DONE;
+ if (net_device_ctx->data_path_is_vf == vf_is_up)
+ return NOTIFY_OK;
+ net_device_ctx->data_path_is_vf = vf_is_up;
+
netvsc_switch_datapath(ndev, vf_is_up);
netdev_info(ndev, "Data path switched %s VF: %s\n",
vf_is_up ? "to" : "from", vf_netdev->name);
@@ -2582,6 +2595,12 @@ static int netvsc_resume(struct hv_device *dev)
rtnl_lock();
net_device_ctx = netdev_priv(net);
+
+ /* Reset the data path to the netvsc NIC before re-opening the vmbus
+ * channel. Later netvsc_netdev_event() will switch the data path to
+ * the VF upon the UP or CHANGE event.
+ */
+ net_device_ctx->data_path_is_vf = false;
device_info = net_device_ctx->saved_netvsc_dev_info;
ret = netvsc_attach(net, device_info);
--
2.25.1
From: Helmut Grohne <[email protected]>
[ Upstream commit edecfa98f602a597666e3c5cab2677ada38d93c5 ]
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <[email protected]>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91-sama5d2_icp.dts | 2 +-
drivers/net/dsa/microchip/ksz8795.c | 18 +++++++++++-----
drivers/net/dsa/microchip/ksz9477.c | 29 +++++++++++++++++---------
drivers/net/dsa/microchip/ksz_common.c | 13 +++++++++++-
drivers/net/dsa/microchip/ksz_common.h | 3 ++-
5 files changed, 47 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 8d19925fc09e4..6783cf16ff818 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -116,7 +116,6 @@ spi2: spi@400 {
switch0: ksz8563@0 {
compatible = "microchip,ksz8563";
reg = <0>;
- phy-mode = "mii";
reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
spi-max-frequency = <500000>;
@@ -140,6 +139,7 @@ port@2 {
reg = <2>;
label = "cpu";
ethernet = <&macb0>;
+ phy-mode = "mii";
fixed-link {
speed = <100>;
full-duplex;
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 87db588bcdd6b..44a4b73806382 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -941,11 +941,19 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
if (cpu_port) {
+ if (!p->interface && dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ port);
+ p->interface = dev->compat_interface;
+ }
+
/* Configure MII interface for proper network communication. */
ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
data8 &= ~PORT_INTERFACE_TYPE;
data8 &= ~PORT_GMII_1GPS_MODE;
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
p->phydev.speed = SPEED_100;
break;
@@ -961,11 +969,11 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
default:
data8 &= ~PORT_RGMII_ID_IN_ENABLE;
data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IN_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_OUT_ENABLE;
data8 |= PORT_GMII_1GPS_MODE;
data8 |= PORT_INTERFACE_RGMII;
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 4a9239b2c2e4a..a5402f4dd5278 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1217,7 +1217,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
ksz9477_set_xmii(dev, 0, &data8);
ksz9477_set_gbit(dev, false, &data8);
@@ -1238,11 +1238,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz9477_set_gbit(dev, true, &data8);
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_EG_ENABLE;
p->phydev.speed = SPEED_1000;
break;
@@ -1286,23 +1286,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
dev->cpu_port = i;
dev->host_mask = (1 << dev->cpu_port);
dev->port_mask |= dev->host_mask;
+ p = &dev->ports[i];
/* Read from XMII register to determine host port
* interface. If set specifically in device tree
* note the difference to help debugging.
*/
interface = ksz9477_get_interface(dev, i);
- if (!dev->interface)
- dev->interface = interface;
- if (interface && interface != dev->interface)
+ if (!p->interface) {
+ if (dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ i);
+ p->interface = dev->compat_interface;
+ } else {
+ p->interface = interface;
+ }
+ }
+ if (interface && interface != p->interface)
dev_info(dev->dev,
"use %s instead of %s\n",
- phy_modes(dev->interface),
+ phy_modes(p->interface),
phy_modes(interface));
/* enable cpu port */
ksz9477_port_setup(dev, i, true);
- p = &dev->ports[dev->cpu_port];
p->vid_member = dev->port_mask;
p->on = 1;
}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7b6c0dce75360..3dcf42f78b51b 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -413,6 +413,8 @@ int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops)
{
phy_interface_t interface;
+ struct device_node *port;
+ unsigned int port_num;
int ret;
if (dev->pdata)
@@ -446,10 +448,19 @@ int ksz_switch_register(struct ksz_device *dev,
/* Host port interface will be self detected, or specifically set in
* device tree.
*/
+ for (port_num = 0; port_num < dev->port_cnt; ++port_num)
+ dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
if (dev->dev->of_node) {
ret = of_get_phy_mode(dev->dev->of_node, &interface);
if (ret == 0)
- dev->interface = interface;
+ dev->compat_interface = interface;
+ for_each_available_child_of_node(dev->dev->of_node, port) {
+ if (of_property_read_u32(port, "reg", &port_num))
+ continue;
+ if (port_num >= dev->port_cnt)
+ return -EINVAL;
+ of_get_phy_mode(port, &dev->ports[port_num].interface);
+ }
dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
"microchip,synclko-125");
}
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 7d11dd32ec0d1..7382b1d0c1d81 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -39,6 +39,7 @@ struct ksz_port {
u32 freeze:1; /* MIB counter freeze is enabled */
struct ksz_port_mib mib;
+ phy_interface_t interface;
};
struct ksz_device {
@@ -72,7 +73,7 @@ struct ksz_device {
int mib_cnt;
int mib_port_cnt;
int last_port; /* ports after that not used */
- phy_interface_t interface;
+ phy_interface_t compat_interface;
u32 regs_size;
bool phy_errata_9477;
bool synclko_125;
--
2.25.1
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit 52a3974feb1a3eec25d8836d37a508b67b0a9cd0 ]
Get and put the reference to the ctrl in the nvme_dev_open() and
nvme_dev_release() before and after module get/put for ctrl in char
device file operations.
Introduce char_dev relase function, get/put the controller and module
which allows us to fix the potential Oops which can be easily reproduced
with a passthru ctrl (although the problem also exists with pure user
access):
Entering kdb (current=0xffff8887f8290000, pid 3128) on processor 30 Oops: (null)
due to oops @ 0xffffffffa01019ad
CPU: 30 PID: 3128 Comm: bash Tainted: G W OE 5.8.0-rc4nvme-5.9+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.4
RIP: 0010:nvme_free_ctrl+0x234/0x285 [nvme_core]
Code: 57 10 a0 e8 73 bf 02 e1 ba 3d 11 00 00 48 c7 c6 98 33 10 a0 48 c7 c7 1d 57 10 a0 e8 5b bf 02 e1 8
RSP: 0018:ffffc90001d63de0 EFLAGS: 00010246
RAX: ffffffffa05c0440 RBX: ffff8888119e45a0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8888177e9550 RDI: ffff8888119e43b0
RBP: ffff8887d4768000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffc90001d63c90 R12: ffff8888119e43b0
R13: ffff8888119e5108 R14: dead000000000100 R15: ffff8888119e5108
FS: 00007f1ef27b0740(0000) GS:ffff888817600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa05c0470 CR3: 00000007f6bee000 CR4: 00000000003406e0
Call Trace:
device_release+0x27/0x80
kobject_put+0x98/0x170
nvmet_passthru_ctrl_disable+0x4a/0x70 [nvmet]
nvmet_passthru_enable_store+0x4c/0x90 [nvmet]
configfs_write_file+0xe6/0x150
vfs_write+0xba/0x1e0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1ef1eb2840
Code: Bad RIP value.
RSP: 002b:00007fffdbff0eb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ef1eb2840
RDX: 0000000000000002 RSI: 00007f1ef27d2000 RDI: 0000000000000001
RBP: 00007f1ef27d2000 R08: 000000000000000a R09: 00007f1ef27b0740
R10: 0000000000000001 R11: 0000000000000246 R12: 00007f1ef2186400
R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
With this patch fix we take the module ref count in nvme_dev_open() and
release that ref count in newly introduced nvme_dev_release().
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f2556f0ea20dc..69165a8f7c1f0 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3060,10 +3060,24 @@ static int nvme_dev_open(struct inode *inode, struct file *file)
return -EWOULDBLOCK;
}
+ nvme_get_ctrl(ctrl);
+ if (!try_module_get(ctrl->ops->module))
+ return -EINVAL;
+
file->private_data = ctrl;
return 0;
}
+static int nvme_dev_release(struct inode *inode, struct file *file)
+{
+ struct nvme_ctrl *ctrl =
+ container_of(inode->i_cdev, struct nvme_ctrl, cdev);
+
+ module_put(ctrl->ops->module);
+ nvme_put_ctrl(ctrl);
+ return 0;
+}
+
static int nvme_dev_user_cmd(struct nvme_ctrl *ctrl, void __user *argp)
{
struct nvme_ns *ns;
@@ -3126,6 +3140,7 @@ static long nvme_dev_ioctl(struct file *file, unsigned int cmd,
static const struct file_operations nvme_dev_fops = {
.owner = THIS_MODULE,
.open = nvme_dev_open,
+ .release = nvme_dev_release,
.unlocked_ioctl = nvme_dev_ioctl,
.compat_ioctl = compat_ptr_ioctl,
};
--
2.25.1
From: David Milburn <[email protected]>
[ Upstream commit ce4cc3133dc72c31bd49ddcf22d0f9eeff47a761 ]
The write zeros command does not work with 4k range.
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00000200
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 5c 61 5c b0 96 21 1b 5e 85 0c 07 32 9c 8c eb 3c |\a\..!.^...2...<|
00000010 4a a2 06 ca 67 15 2d 8e 29 8d a8 a0 7e 46 8c 62 |J...g.-.)...~F.b|
00000020 bb 4c 6c c1 6b f5 ae a5 e4 a9 bc 93 4f 60 ff 7a |.Ll.k.......O`.z|
Reported-by: Eric Sandeen <[email protected]>
Signed-off-by: David Milburn <[email protected]>
Tested-by: Eric Sandeen <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 69a19fe241063..90346cba87d1e 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3093,7 +3093,8 @@ static const struct pci_device_id nvme_id_table[] = {
{ PCI_VDEVICE(INTEL, 0xf1a5), /* Intel 600P/P3100 */
.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
NVME_QUIRK_MEDIUM_PRIO_SQ |
- NVME_QUIRK_NO_TEMP_THRESH_CHANGE },
+ NVME_QUIRK_NO_TEMP_THRESH_CHANGE |
+ NVME_QUIRK_DISABLE_WRITE_ZEROES, },
{ PCI_VDEVICE(INTEL, 0xf1a6), /* Intel 760p/Pro 7600p */
.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
{ PCI_VDEVICE(INTEL, 0x5845), /* Qemu emulated controller */
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ]
This driver is a virtual driver stacked on top of Ethernet interfaces.
When this driver transmits data on the Ethernet device, the skb->protocol
setting is inconsistent with the Ethernet header prepended to the skb.
This causes a user listening on the Ethernet interface with an AF_PACKET
socket, to see different sll_protocol values for incoming and outgoing
frames, because incoming frames would have this value set by parsing the
Ethernet header.
This patch changes the skb->protocol value for outgoing Ethernet frames,
making it consistent with the Ethernet header prepended. This makes a
user listening on the Ethernet device with an AF_PACKET socket, to see
the same sll_protocol value for incoming and outgoing frames.
Cc: Martin Schiller <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/lapbether.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index e61616b0b91c7..b726101d4707a 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -198,8 +198,6 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
struct net_device *dev;
int size = skb->len;
- skb->protocol = htons(ETH_P_X25);
-
ptr = skb_push(skb, 2);
*ptr++ = size % 256;
@@ -210,6 +208,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
skb->dev = dev = lapbeth->ethdev;
+ skb->protocol = htons(ETH_P_DEC);
+
skb_reset_network_header(skb);
dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
--
2.25.1
From: Ulf Hansson <[email protected]>
[ Upstream commit 36050d8984ab743f9990a2eb97a0062fdc3d7bbd ]
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. This lead to the following RCU splat on an ARM64
Qcom board.
[ 5.529634] WARNING: suspicious RCU usage
[ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.541092] 5.9.0-rc3 #86 Not tainted
[ 5.541098] -----------------------------
[ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage!
[ 5.541110]
[ 5.541110] other info that might help us debug this:
[ 5.541110]
[ 5.541116]
[ 5.541116] rcu_scheduler_active = 2, debug_locks = 1
[ 5.541122] RCU used illegally from extended quiescent state!
[ 5.541129] no locks held by swapper/0/0.
[ 5.541134]
[ 5.541134] stack backtrace:
[ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86
[ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 5.541157] Call trace:
[ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 5.574186] dump_backtrace+0x0/0x1c8
[ 5.574206] show_stack+0x14/0x20
[ 5.574229] dump_stack+0xe8/0x154
[ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8
[ 5.574269] lock_acquire+0x3f0/0x460
[ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0
[ 5.574314] __pm_runtime_suspend+0x4c/0x188
[ 5.574341] psci_enter_domain_idle_state+0x40/0xa0
[ 5.574362] cpuidle_enter_state+0xc0/0x610
[ 5.646487] cpuidle_enter+0x38/0x50
[ 5.650651] call_cpuidle+0x18/0x40
[ 5.654467] do_idle+0x228/0x278
[ 5.657678] cpu_startup_entry+0x24/0x70
[ 5.661153] rest_init+0x1a4/0x278
[ 5.665061] arch_call_rest_init+0xc/0x14
[ 5.668272] start_kernel+0x508/0x540
Following the path in pm_runtime_put_sync_suspend() from
psci_enter_domain_idle_state(), it seems like we end up using the RCU.
Therefore, let's simply silence the splat by informing the RCU about it
with RCU_NONIDLE.
Note that, this is a temporary solution. Instead we should strive to avoid
using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit()
further down, closer to the arch specific code. However, as the CPU PM
notifiers are also using the RCU, additional rework is needed.
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpuidle/cpuidle-psci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index 3806f911b61c0..915172e3ec906 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -64,7 +64,7 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
return -1;
/* Do runtime PM to manage a hierarchical CPU toplogy. */
- pm_runtime_put_sync_suspend(pd_dev);
+ RCU_NONIDLE(pm_runtime_put_sync_suspend(pd_dev));
state = psci_get_domain_state();
if (!state)
@@ -72,7 +72,7 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
ret = psci_cpu_suspend_enter(state) ? -1 : idx;
- pm_runtime_get_sync(pd_dev);
+ RCU_NONIDLE(pm_runtime_get_sync(pd_dev));
cpu_pm_exit();
--
2.25.1
From: Sascha Hauer <[email protected]>
[ Upstream commit 530b5affc675ade5db4a03f04ed7cd66806c8a1a ]
spi_unregister_controller() not only unregisters the controller, but
also frees the controller. This will free the driver data with it, so
we must not access it later dspi_remove().
Solve this by allocating the driver data separately from the SPI
controller.
Signed-off-by: Sascha Hauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsl-dspi.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 91c6affe139c9..aae9f9a7aea6c 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1273,11 +1273,14 @@ static int dspi_probe(struct platform_device *pdev)
void __iomem *base;
bool big_endian;
- ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
+ dspi = devm_kzalloc(&pdev->dev, sizeof(*dspi), GFP_KERNEL);
+ if (!dspi)
+ return -ENOMEM;
+
+ ctlr = spi_alloc_master(&pdev->dev, 0);
if (!ctlr)
return -ENOMEM;
- dspi = spi_controller_get_devdata(ctlr);
dspi->pdev = pdev;
dspi->ctlr = ctlr;
@@ -1414,7 +1417,7 @@ static int dspi_probe(struct platform_device *pdev)
if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
ctlr->ptp_sts_supported = true;
- platform_set_drvdata(pdev, ctlr);
+ platform_set_drvdata(pdev, dspi);
ret = spi_register_controller(ctlr);
if (ret != 0) {
@@ -1437,8 +1440,7 @@ static int dspi_probe(struct platform_device *pdev)
static int dspi_remove(struct platform_device *pdev)
{
- struct spi_controller *ctlr = platform_get_drvdata(pdev);
- struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+ struct fsl_dspi *dspi = platform_get_drvdata(pdev);
/* Disconnect from the SPI framework */
spi_unregister_controller(dspi->ctlr);
--
2.25.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 516d980f85415d76ae3d0d2a871eb20243f46c95 ]
PowerPC allmodconfig often fails to build as follows:
LD .tmp_vmlinux.kallsyms1
KSYM .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
KSYM .tmp_vmlinux.kallsyms2.o
LD .tmp_vmlinux.kallsyms3
KSYM .tmp_vmlinux.kallsyms3.o
LD vmlinux
SORTTAB vmlinux
SYSMAP System.map
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
make[2]: *** [../Makefile:1162: vmlinux] Error 1
Setting KALLSYMS_EXTRA_PASS=1 does not help.
This is caused by the compiler inserting stubs such as *.long_branch.*
and *.plt_branch.*
$ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2
[ snip ]
c00000000210c010 t 00000075.plt_branch.da9:19
c00000000210c020 t 00000075.plt_branch.1677:5
c00000000210c030 t 00000075.long_branch.memmove
c00000000210c034 t 00000075.plt_branch.9e0:5
c00000000210c044 t 00000075.plt_branch.free_initrd_mem
...
Actually, the problem mentioned in scripts/link-vmlinux.sh comments;
"In theory it's possible this results in even more stubs, but unlikely"
is happening here, and ends up with another kallsyms step required.
scripts/kallsyms.c already ignores various compiler stubs. Let's do
similar to make kallsysms for PowerPC always succeed in 2 steps.
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kallsyms.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 6dc3078649fa0..e8b26050f5458 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -82,6 +82,7 @@ static char *sym_name(const struct sym_entry *s)
static bool is_ignored_symbol(const char *name, char type)
{
+ /* Symbol names that exactly match to the following are ignored.*/
static const char * const ignored_symbols[] = {
/*
* Symbols which vary between passes. Passes 1 and 2 must have
@@ -104,6 +105,7 @@ static bool is_ignored_symbol(const char *name, char type)
NULL
};
+ /* Symbol names that begin with the following are ignored.*/
static const char * const ignored_prefixes[] = {
"$", /* local symbols for ARM, MIPS, etc. */
".LASANPC", /* s390 kasan local symbols */
@@ -112,6 +114,7 @@ static bool is_ignored_symbol(const char *name, char type)
NULL
};
+ /* Symbol names that end with the following are ignored.*/
static const char * const ignored_suffixes[] = {
"_from_arm", /* arm */
"_from_thumb", /* arm */
@@ -119,9 +122,15 @@ static bool is_ignored_symbol(const char *name, char type)
NULL
};
+ /* Symbol names that contain the following are ignored.*/
+ static const char * const ignored_matches[] = {
+ ".long_branch.", /* ppc stub */
+ ".plt_branch.", /* ppc stub */
+ NULL
+ };
+
const char * const *p;
- /* Exclude symbols which vary between passes. */
for (p = ignored_symbols; *p; p++)
if (!strcmp(name, *p))
return true;
@@ -137,6 +146,11 @@ static bool is_ignored_symbol(const char *name, char type)
return true;
}
+ for (p = ignored_matches; *p; p++) {
+ if (strstr(name, *p))
+ return true;
+ }
+
if (type == 'U' || type == 'u')
return true;
/* exclude debugging symbols */
--
2.25.1
From: Xianting Tian <[email protected]>
[ Upstream commit 50b7c24390a53c78de546215282fb52980f1d7b7 ]
Currently, we use nvmeq->q_depth as the upper limit for a valid tag in
nvme_handle_cqe(), it is not correct. Because the available tag number
is recorded in tagset, which is not equal to nvmeq->q_depth.
The nvme driver registers interrupts for queues before initializing the
tagset, because it uses the number of successful request_irq() calls to
configure the tagset parameters. This allows a race condition with the
current tag validity check if the controller happens to produce an
interrupt with a corrupted CQE before the tagset is initialized.
Replace the driver's indirect tag check with the one already provided by
the block layer.
Signed-off-by: Xianting Tian <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/pci.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 90346cba87d1e..cc3ae9c63a01b 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -942,13 +942,6 @@ static inline void nvme_handle_cqe(struct nvme_queue *nvmeq, u16 idx)
struct nvme_completion *cqe = &nvmeq->cqes[idx];
struct request *req;
- if (unlikely(cqe->command_id >= nvmeq->q_depth)) {
- dev_warn(nvmeq->dev->ctrl.device,
- "invalid id %d completed on queue %d\n",
- cqe->command_id, le16_to_cpu(cqe->sq_id));
- return;
- }
-
/*
* AEN requests are special as they don't time out and can
* survive any kind of queue freeze and often don't respond to
@@ -962,6 +955,13 @@ static inline void nvme_handle_cqe(struct nvme_queue *nvmeq, u16 idx)
}
req = blk_mq_tag_to_rq(nvme_queue_tagset(nvmeq), cqe->command_id);
+ if (unlikely(!req)) {
+ dev_warn(nvmeq->dev->ctrl.device,
+ "invalid id %d completed on queue %d\n",
+ cqe->command_id, le16_to_cpu(cqe->sq_id));
+ return;
+ }
+
trace_nvme_sq(req, cqe->sq_head, nvmeq->sq_tail);
nvme_end_request(req, cqe->status, cqe->result);
}
--
2.25.1
From: James Smart <[email protected]>
[ Upstream commit 9e0e8dac985d4bd07d9e62922b9d189d3ca2fccf ]
The lldd may have made calls to delete a remote port or local port and
the delete is in progress when the cli then attempts to create a new
controller. Currently, this proceeds without error although it can't be
very successful.
Fix this by validating that both the host port and remote port are
present when a new controller is to be created.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/fc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 92c966ac34c20..43c1745ecd45b 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -3668,12 +3668,14 @@ nvme_fc_create_ctrl(struct device *dev, struct nvmf_ctrl_options *opts)
spin_lock_irqsave(&nvme_fc_lock, flags);
list_for_each_entry(lport, &nvme_fc_lport_list, port_list) {
if (lport->localport.node_name != laddr.nn ||
- lport->localport.port_name != laddr.pn)
+ lport->localport.port_name != laddr.pn ||
+ lport->localport.port_state != FC_OBJSTATE_ONLINE)
continue;
list_for_each_entry(rport, &lport->endp_list, endp_list) {
if (rport->remoteport.node_name != raddr.nn ||
- rport->remoteport.port_name != raddr.pn)
+ rport->remoteport.port_name != raddr.pn ||
+ rport->remoteport.port_state != FC_OBJSTATE_ONLINE)
continue;
/* if fail to get reference fall through. Will error */
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ]
This patch sets skb->protocol before transmitting frames on the HDLC
device, so that a user listening on the HDLC device with an AF_PACKET
socket will see outgoing frames' sll_protocol field correctly set and
consistent with that of incoming frames.
1. Control frames in hdlc_cisco and hdlc_ppp
When these drivers send control frames, skb->protocol is not set.
This value should be set to htons(ETH_P_HDLC), because when receiving
control frames, their skb->protocol is set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, which then calls
cisco_type_trans or ppp_type_trans. The skb->protocol of control frames
is set to htons(ETH_P_HDLC) so that the control frames can be received
by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the
control frames.
2. hdlc_fr
When this driver sends control frames, skb->protocol is set to internal
values used in this driver.
When this driver sends data frames (from upper stacked PVC devices),
skb->protocol is the same as that of the user data packet being sent on
the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3)
(for Ethernet-emulating PVC devices).
However, skb->protocol for both control frames and data frames should be
set to htons(ETH_P_HDLC), because when receiving, all frames received on
the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, and because this
driver doesn't provide a type_trans function in struct hdlc_proto,
all frames will have their skb->protocol set to htons(ETH_P_HDLC).
The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx
to process the frames (control frames are consumed and data frames
are re-received on upper PVC devices).
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/hdlc_cisco.c | 1 +
drivers/net/wan/hdlc_fr.c | 3 +++
drivers/net/wan/hdlc_ppp.c | 1 +
3 files changed, 5 insertions(+)
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 444130655d8ea..cb5898f7d68c9 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -118,6 +118,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type,
skb_put(skb, sizeof(struct cisco_packet));
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
dev_queue_xmit(skb);
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 12b35404cd8e7..d6cfd51613ed8 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -433,6 +433,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
if (pvc->state.fecn) /* TX Congestion counter */
dev->stats.tx_compressed++;
skb->dev = pvc->frad;
+ skb->protocol = htons(ETH_P_HDLC);
+ skb_reset_network_header(skb);
dev_queue_xmit(skb);
return NETDEV_TX_OK;
}
@@ -555,6 +557,7 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
skb_put(skb, i);
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
dev_queue_xmit(skb);
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 16f33d1ffbfb9..64f8556513369 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -251,6 +251,7 @@ static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code,
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
skb_queue_tail(&tx_queue, skb);
}
--
2.25.1
From: Chris Packham <[email protected]>
[ Upstream commit b867eef4cf548cd9541225aadcdcee644669b9e1 ]
The SPIE register contains counts for the TX FIFO so any time the irq
handler was invoked we would attempt to process the RX/TX fifos. Use the
SPIM value to mask the events so that we only process interrupts that
were expected.
This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
Implement soft interrupt replay in C").
Signed-off-by: Chris Packham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsl-espi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index e60581283a247..6d148ab70b93e 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -564,13 +564,14 @@ static void fsl_espi_cpu_irq(struct fsl_espi *espi, u32 events)
static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
{
struct fsl_espi *espi = context_data;
- u32 events;
+ u32 events, mask;
spin_lock(&espi->lock);
/* Get interrupt events(tx/rx) */
events = fsl_espi_read_reg(espi, ESPI_SPIE);
- if (!events) {
+ mask = fsl_espi_read_reg(espi, ESPI_SPIM);
+ if (!(events & mask)) {
spin_unlock(&espi->lock);
return IRQ_NONE;
}
--
2.25.1
From: Xiaoliang Yang <[email protected]>
[ Upstream commit 8b9e03cd08250c60409099c791e858157838d9eb ]
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT,
L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from
matching on src_port and dst_port for TCP and UDP packets.
Signed-off-by: Xiaoliang Yang <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/ocelot/felix_vsc9959.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 1dd9e348152d7..7c167a394b762 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -607,17 +607,17 @@ struct vcap_field vsc9959_vcap_is2_keys[] = {
[VCAP_IS2_HK_DIP_EQ_SIP] = {118, 1},
/* IP4_TCP_UDP (TYPE=100) */
[VCAP_IS2_HK_TCP] = {119, 1},
- [VCAP_IS2_HK_L4_SPORT] = {120, 16},
- [VCAP_IS2_HK_L4_DPORT] = {136, 16},
+ [VCAP_IS2_HK_L4_DPORT] = {120, 16},
+ [VCAP_IS2_HK_L4_SPORT] = {136, 16},
[VCAP_IS2_HK_L4_RNG] = {152, 8},
[VCAP_IS2_HK_L4_SPORT_EQ_DPORT] = {160, 1},
[VCAP_IS2_HK_L4_SEQUENCE_EQ0] = {161, 1},
- [VCAP_IS2_HK_L4_URG] = {162, 1},
- [VCAP_IS2_HK_L4_ACK] = {163, 1},
- [VCAP_IS2_HK_L4_PSH] = {164, 1},
- [VCAP_IS2_HK_L4_RST] = {165, 1},
- [VCAP_IS2_HK_L4_SYN] = {166, 1},
- [VCAP_IS2_HK_L4_FIN] = {167, 1},
+ [VCAP_IS2_HK_L4_FIN] = {162, 1},
+ [VCAP_IS2_HK_L4_SYN] = {163, 1},
+ [VCAP_IS2_HK_L4_RST] = {164, 1},
+ [VCAP_IS2_HK_L4_PSH] = {165, 1},
+ [VCAP_IS2_HK_L4_ACK] = {166, 1},
+ [VCAP_IS2_HK_L4_URG] = {167, 1},
[VCAP_IS2_HK_L4_1588_DOM] = {168, 8},
[VCAP_IS2_HK_L4_1588_VER] = {176, 4},
/* IP4_OTHER (TYPE=101) */
--
2.25.1
From: Douglas Gilbert <[email protected]>
[ Upstream commit 72f04da48a9828ba3ae8ac77bea648bda8b7d0ff ]
It would seem none of the kernel continuous integration does this:
$ cd tools/io_uring
$ make
Otherwise it may have noticed:
cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o
io_uring-bench.c
io_uring-bench.c:133:12: error: static declaration of ‘gettid’
follows non-static declaration
133 | static int gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from io_uring-bench.c:27:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note:
previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
make: *** [<builtin>: io_uring-bench.o] Error 1
The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h
already defines gettid(). So prefix the local definition with
"lk_".
Signed-off-by: Douglas Gilbert <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/io_uring/io_uring-bench.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/io_uring/io_uring-bench.c b/tools/io_uring/io_uring-bench.c
index 0f257139b003e..7703f01183854 100644
--- a/tools/io_uring/io_uring-bench.c
+++ b/tools/io_uring/io_uring-bench.c
@@ -130,7 +130,7 @@ static int io_uring_register_files(struct submitter *s)
s->nr_files);
}
-static int gettid(void)
+static int lk_gettid(void)
{
return syscall(__NR_gettid);
}
@@ -281,7 +281,7 @@ static void *submitter_fn(void *data)
struct io_sq_ring *ring = &s->sq_ring;
int ret, prepped;
- printf("submitter=%d\n", gettid());
+ printf("submitter=%d\n", lk_gettid());
srand48_r(pthread_self(), &s->rand);
--
2.25.1
From: Charles Keepax <[email protected]>
[ Upstream commit 94cc89eb8fa5039fcb6e3e3d50f929ddcccee095 ]
In regmap_debugfs_init the initialisation of the debugfs is delayed
if the root node isn't ready yet. Most callers of regmap_debugfs_init
pass the name from the regmap_config, which is considered temporary
ie. may be unallocated after the regmap_init call returns. This leads
to a potential use after free, where config->name has been freed by
the time it is used in regmap_debugfs_initcall.
This situation can be seen on Zynq, where the architecture init_irq
callback registers a syscon device, using a local variable for the
regmap_config. As init_irq is very early in the platform bring up the
regmap debugfs root isn't ready yet. Although this doesn't crash it
does result in the debugfs entry not having the correct name.
Regmap already sets map->name from config->name on the regmap_init
path and the fact that a separate field is used to pass the name
to regmap_debugfs_init appears to be an artifact of the debugfs
name being added before the map name. As such this patch updates
regmap_debugfs_init to use map->name, which is already duplicated from
the config avoiding the issue.
This does however leave two lose ends, both regmap_attach_dev and
regmap_reinit_cache can be called after a regmap is registered and
would have had the effect of applying a new name to the debugfs
entries. In both of these cases it was chosen to update the map
name. In the case of regmap_attach_dev there are 3 users that
currently use this function to update the name, thus doing so avoids
changes for those users and it seems reasonable that attaching
a device would want to set the name of the map. In the case of
regmap_reinit_cache the primary use-case appears to be devices that
need some register access to identify the device (for example devices
in the same family) and then update the cache to match the exact
hardware. Whilst no users do currently update the name here, given the
use-case it seemed reasonable the name might want to be updated once
the device is better identified.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/regmap/internal.h | 4 +--
drivers/base/regmap/regmap-debugfs.c | 7 ++---
drivers/base/regmap/regmap.c | 44 +++++++++++++++++++++-------
3 files changed, 38 insertions(+), 17 deletions(-)
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index 3d80c4b43f720..e0ff8e90ebdcf 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -217,7 +217,7 @@ struct regmap_field {
#ifdef CONFIG_DEBUG_FS
extern void regmap_debugfs_initcall(void);
-extern void regmap_debugfs_init(struct regmap *map, const char *name);
+extern void regmap_debugfs_init(struct regmap *map);
extern void regmap_debugfs_exit(struct regmap *map);
static inline void regmap_debugfs_disable(struct regmap *map)
@@ -227,7 +227,7 @@ static inline void regmap_debugfs_disable(struct regmap *map)
#else
static inline void regmap_debugfs_initcall(void) { }
-static inline void regmap_debugfs_init(struct regmap *map, const char *name) { }
+static inline void regmap_debugfs_init(struct regmap *map) { }
static inline void regmap_debugfs_exit(struct regmap *map) { }
static inline void regmap_debugfs_disable(struct regmap *map) { }
#endif
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index f58baff2be0af..b6d63ef16b442 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -17,7 +17,6 @@
struct regmap_debugfs_node {
struct regmap *map;
- const char *name;
struct list_head link;
};
@@ -544,11 +543,12 @@ static const struct file_operations regmap_cache_bypass_fops = {
.write = regmap_cache_bypass_write_file,
};
-void regmap_debugfs_init(struct regmap *map, const char *name)
+void regmap_debugfs_init(struct regmap *map)
{
struct rb_node *next;
struct regmap_range_node *range_node;
const char *devname = "dummy";
+ const char *name = map->name;
/*
* Userspace can initiate reads from the hardware over debugfs.
@@ -569,7 +569,6 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
if (!node)
return;
node->map = map;
- node->name = name;
mutex_lock(®map_debugfs_early_lock);
list_add(&node->link, ®map_debugfs_early_list);
mutex_unlock(®map_debugfs_early_lock);
@@ -679,7 +678,7 @@ void regmap_debugfs_initcall(void)
mutex_lock(®map_debugfs_early_lock);
list_for_each_entry_safe(node, tmp, ®map_debugfs_early_list, link) {
- regmap_debugfs_init(node->map, node->name);
+ regmap_debugfs_init(node->map);
list_del(&node->link);
kfree(node);
}
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 795a62a040220..a7ab49ce5de00 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -581,14 +581,34 @@ static void regmap_range_exit(struct regmap *map)
kfree(map->selector_work_buf);
}
+static int regmap_set_name(struct regmap *map, const struct regmap_config *config)
+{
+ if (config->name) {
+ const char *name = kstrdup_const(config->name, GFP_KERNEL);
+
+ if (!name)
+ return -ENOMEM;
+
+ kfree_const(map->name);
+ map->name = name;
+ }
+
+ return 0;
+}
+
int regmap_attach_dev(struct device *dev, struct regmap *map,
const struct regmap_config *config)
{
struct regmap **m;
+ int ret;
map->dev = dev;
- regmap_debugfs_init(map, config->name);
+ ret = regmap_set_name(map, config);
+ if (ret)
+ return ret;
+
+ regmap_debugfs_init(map);
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
@@ -679,9 +699,9 @@ struct regmap *__regmap_init(struct device *dev,
const char *lock_name)
{
struct regmap *map;
- int ret = -EINVAL;
enum regmap_endian reg_endian, val_endian;
int i, j;
+ int ret;
if (!config)
goto err;
@@ -692,13 +712,9 @@ struct regmap *__regmap_init(struct device *dev,
goto err;
}
- if (config->name) {
- map->name = kstrdup_const(config->name, GFP_KERNEL);
- if (!map->name) {
- ret = -ENOMEM;
- goto err_map;
- }
- }
+ ret = regmap_set_name(map, config);
+ if (ret)
+ goto err_map;
if (config->disable_locking) {
map->lock = map->unlock = regmap_lock_unlock_none;
@@ -1142,7 +1158,7 @@ struct regmap *__regmap_init(struct device *dev,
if (ret != 0)
goto err_regcache;
} else {
- regmap_debugfs_init(map, config->name);
+ regmap_debugfs_init(map);
}
return map;
@@ -1302,6 +1318,8 @@ EXPORT_SYMBOL_GPL(regmap_field_free);
*/
int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
{
+ int ret;
+
regcache_exit(map);
regmap_debugfs_exit(map);
@@ -1314,7 +1332,11 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
map->readable_noinc_reg = config->readable_noinc_reg;
map->cache_type = config->cache_type;
- regmap_debugfs_init(map, config->name);
+ ret = regmap_set_name(map, config);
+ if (ret)
+ return ret;
+
+ regmap_debugfs_init(map);
map->cache_bypass = false;
map->cache_only = false;
--
2.25.1
From: Jens Axboe <[email protected]>
[ Upstream commit 6ca56f845955e325033758f90a2cffe150f31bc8 ]
These will naturally fail when attempted through SQPOLL, but either
with -EFAULT or -EBADF. Make it explicit that these are not workable
through SQPOLL and return -EINVAL, just like other ops that need to
use ->files.
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index d05023ca74bdc..25543fdec5904 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -3316,7 +3316,7 @@ static int io_epoll_ctl_prep(struct io_kiocb *req,
#if defined(CONFIG_EPOLL)
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
- if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL)))
return -EINVAL;
req->epoll.epfd = READ_ONCE(sqe->fd);
@@ -3433,7 +3433,7 @@ static int io_fadvise(struct io_kiocb *req, bool force_nonblock)
static int io_statx_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
- if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL | IORING_SETUP_SQPOLL)))
return -EINVAL;
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
@@ -5038,6 +5038,8 @@ static int io_async_cancel(struct io_kiocb *req)
static int io_files_update_prep(struct io_kiocb *req,
const struct io_uring_sqe *sqe)
{
+ if (unlikely(req->ctx->flags & IORING_SETUP_SQPOLL))
+ return -EINVAL;
if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT)))
return -EINVAL;
if (sqe->ioprio || sqe->rw_flags)
--
2.25.1
From: Aloka Dixit <[email protected]>
[ Upstream commit 412a84b5714af56f3eb648bba155107b5edddfdf ]
Radiotap header field 'Channel flags' has '2 GHz spectrum' set to
'true' for 6GHz packet.
Change it to 5GHz as there isn't a separate option available for 6GHz.
Signed-off-by: Aloka Dixit <[email protected]>
Link: https://lore.kernel.org/r/010101747ab7b703-1d7c9851-1594-43bf-81f7-f79ce7a67cc6-000000@us-west-2.amazonses.com
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5c5af4b5fc080..f2c3ac648fc08 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -451,7 +451,8 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
else if (status->bw == RATE_INFO_BW_5)
channel_flags |= IEEE80211_CHAN_QUARTER;
- if (status->band == NL80211_BAND_5GHZ)
+ if (status->band == NL80211_BAND_5GHZ ||
+ status->band == NL80211_BAND_6GHZ)
channel_flags |= IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ;
else if (status->encoding != RX_ENC_LEGACY)
channel_flags |= IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ]
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <[email protected]>
Cc: Martin Schiller <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/hdlc_fr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 9acad651ea1f6..12b35404cd8e7 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1041,7 +1041,7 @@ static void pvc_setup(struct net_device *dev)
{
dev->type = ARPHRD_DLCI;
dev->flags = IFF_POINTOPOINT;
- dev->hard_header_len = 10;
+ dev->hard_header_len = 0;
dev->addr_len = 2;
netif_keep_dst(dev);
}
@@ -1093,6 +1093,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev->mtu = HDLC_MAX_MTU;
dev->min_mtu = 68;
dev->max_mtu = HDLC_MAX_MTU;
+ dev->needed_headroom = 10;
dev->priv_flags |= IFF_NO_QUEUE;
dev->ml_priv = pvc;
--
2.25.1
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 795d6379a47bcbb88bd95a69920e4acc52849f88 ]
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace.c | 38 ++++++++++++++++++-------------------
kernel/trace/trace_output.c | 12 ++++++------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 6fc6da55b94e2..9fb665c440b2c 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3743,14 +3743,14 @@ unsigned long trace_total_entries(struct trace_array *tr)
static void print_lat_help_header(struct seq_file *m)
{
- seq_puts(m, "# _------=> CPU# \n"
- "# / _-----=> irqs-off \n"
- "# | / _----=> need-resched \n"
- "# || / _---=> hardirq/softirq \n"
- "# ||| / _--=> preempt-depth \n"
- "# |||| / delay \n"
- "# cmd pid ||||| time | caller \n"
- "# \\ / ||||| \\ | / \n");
+ seq_puts(m, "# _------=> CPU# \n"
+ "# / _-----=> irqs-off \n"
+ "# | / _----=> need-resched \n"
+ "# || / _---=> hardirq/softirq \n"
+ "# ||| / _--=> preempt-depth \n"
+ "# |||| / delay \n"
+ "# cmd pid ||||| time | caller \n"
+ "# \\ / ||||| \\ | / \n");
}
static void print_event_info(struct array_buffer *buf, struct seq_file *m)
@@ -3771,26 +3771,26 @@ static void print_func_help_header(struct array_buffer *buf, struct seq_file *m,
print_event_info(buf, m);
- seq_printf(m, "# TASK-PID %s CPU# TIMESTAMP FUNCTION\n", tgid ? "TGID " : "");
- seq_printf(m, "# | | %s | | |\n", tgid ? " | " : "");
+ seq_printf(m, "# TASK-PID %s CPU# TIMESTAMP FUNCTION\n", tgid ? " TGID " : "");
+ seq_printf(m, "# | | %s | | |\n", tgid ? " | " : "");
}
static void print_func_help_header_irq(struct array_buffer *buf, struct seq_file *m,
unsigned int flags)
{
bool tgid = flags & TRACE_ITER_RECORD_TGID;
- const char *space = " ";
- int prec = tgid ? 10 : 2;
+ const char *space = " ";
+ int prec = tgid ? 12 : 2;
print_event_info(buf, m);
- seq_printf(m, "# %.*s _-----=> irqs-off\n", prec, space);
- seq_printf(m, "# %.*s / _----=> need-resched\n", prec, space);
- seq_printf(m, "# %.*s| / _---=> hardirq/softirq\n", prec, space);
- seq_printf(m, "# %.*s|| / _--=> preempt-depth\n", prec, space);
- seq_printf(m, "# %.*s||| / delay\n", prec, space);
- seq_printf(m, "# TASK-PID %.*sCPU# |||| TIMESTAMP FUNCTION\n", prec, " TGID ");
- seq_printf(m, "# | | %.*s | |||| | |\n", prec, " | ");
+ seq_printf(m, "# %.*s _-----=> irqs-off\n", prec, space);
+ seq_printf(m, "# %.*s / _----=> need-resched\n", prec, space);
+ seq_printf(m, "# %.*s| / _---=> hardirq/softirq\n", prec, space);
+ seq_printf(m, "# %.*s|| / _--=> preempt-depth\n", prec, space);
+ seq_printf(m, "# %.*s||| / delay\n", prec, space);
+ seq_printf(m, "# TASK-PID %.*s CPU# |||| TIMESTAMP FUNCTION\n", prec, " TGID ");
+ seq_printf(m, "# | | %.*s | |||| | |\n", prec, " | ");
}
void
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 73976de7f8cc8..a8d719263e1bc 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -497,7 +497,7 @@ lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu)
trace_find_cmdline(entry->pid, comm);
- trace_seq_printf(s, "%8.8s-%-5d %3d",
+ trace_seq_printf(s, "%8.8s-%-7d %3d",
comm, entry->pid, cpu);
return trace_print_lat_fmt(s, entry);
@@ -588,15 +588,15 @@ int trace_print_context(struct trace_iterator *iter)
trace_find_cmdline(entry->pid, comm);
- trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid);
+ trace_seq_printf(s, "%16s-%-7d ", comm, entry->pid);
if (tr->trace_flags & TRACE_ITER_RECORD_TGID) {
unsigned int tgid = trace_find_tgid(entry->pid);
if (!tgid)
- trace_seq_printf(s, "(-----) ");
+ trace_seq_printf(s, "(-------) ");
else
- trace_seq_printf(s, "(%5d) ", tgid);
+ trace_seq_printf(s, "(%7d) ", tgid);
}
trace_seq_printf(s, "[%03d] ", iter->cpu);
@@ -636,7 +636,7 @@ int trace_print_lat_context(struct trace_iterator *iter)
trace_find_cmdline(entry->pid, comm);
trace_seq_printf(
- s, "%16s %5d %3d %d %08x %08lx ",
+ s, "%16s %7d %3d %d %08x %08lx ",
comm, entry->pid, iter->cpu, entry->flags,
entry->preempt_count, iter->idx);
} else {
@@ -917,7 +917,7 @@ static enum print_line_t trace_ctxwake_print(struct trace_iterator *iter,
S = task_index_to_char(field->prev_state);
trace_find_cmdline(field->next_pid, comm);
trace_seq_printf(&iter->seq,
- " %5d:%3d:%c %s [%03d] %5d:%3d:%c %s\n",
+ " %7d:%3d:%c %s [%03d] %7d:%3d:%c %s\n",
field->prev_pid,
field->prev_prio,
S, delim,
--
2.25.1
From: Olympia Giannou <[email protected]>
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ]
Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.
The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/rndis_host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index bd9c07888ebb4..6fa7a009a24a4 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -201,7 +201,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
dev_dbg(&info->control->dev,
"rndis response error, code %d\n", retval);
}
- msleep(20);
+ msleep(40);
}
dev_dbg(&info->control->dev, "rndis response timeout\n");
return -ETIMEDOUT;
--
2.25.1
From: Al Viro <[email protected]>
[ Upstream commit 933a3752babcf6513117d5773d2b70782d6ad149 ]
the callers rely upon having any iov_iter_truncate() done inside
->direct_IO() countered by iov_iter_reexpand().
Reported-by: Qian Cai <[email protected]>
Tested-by: Qian Cai <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/file.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 83d917f7e5425..98e170cc0b932 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -3091,11 +3091,10 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
ssize_t ret = 0;
struct file *file = iocb->ki_filp;
struct fuse_file *ff = file->private_data;
- bool async_dio = ff->fc->async_dio;
loff_t pos = 0;
struct inode *inode;
loff_t i_size;
- size_t count = iov_iter_count(iter);
+ size_t count = iov_iter_count(iter), shortened = 0;
loff_t offset = iocb->ki_pos;
struct fuse_io_priv *io;
@@ -3103,17 +3102,9 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
inode = file->f_mapping->host;
i_size = i_size_read(inode);
- if ((iov_iter_rw(iter) == READ) && (offset > i_size))
+ if ((iov_iter_rw(iter) == READ) && (offset >= i_size))
return 0;
- /* optimization for short read */
- if (async_dio && iov_iter_rw(iter) != WRITE && offset + count > i_size) {
- if (offset >= i_size)
- return 0;
- iov_iter_truncate(iter, fuse_round_up(ff->fc, i_size - offset));
- count = iov_iter_count(iter);
- }
-
io = kmalloc(sizeof(struct fuse_io_priv), GFP_KERNEL);
if (!io)
return -ENOMEM;
@@ -3129,15 +3120,22 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
* By default, we want to optimize all I/Os with async request
* submission to the client filesystem if supported.
*/
- io->async = async_dio;
+ io->async = ff->fc->async_dio;
io->iocb = iocb;
io->blocking = is_sync_kiocb(iocb);
+ /* optimization for short read */
+ if (io->async && !io->write && offset + count > i_size) {
+ iov_iter_truncate(iter, fuse_round_up(ff->fc, i_size - offset));
+ shortened = count - iov_iter_count(iter);
+ count -= shortened;
+ }
+
/*
* We cannot asynchronously extend the size of a file.
* In such case the aio will behave exactly like sync io.
*/
- if ((offset + count > i_size) && iov_iter_rw(iter) == WRITE)
+ if ((offset + count > i_size) && io->write)
io->blocking = true;
if (io->async && io->blocking) {
@@ -3155,6 +3153,7 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
} else {
ret = __fuse_direct_read(io, iter, &pos);
}
+ iov_iter_reexpand(iter, iov_iter_count(iter) + shortened);
if (io->async) {
bool blocking = io->blocking;
--
2.25.1
From: Lucy Yan <[email protected]>
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ]
Increase Rx ring size to address issue where hardware is reaching
the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/dec/tulip/de2104x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index 592454f444ce2..0b30011b9839e 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -85,7 +85,7 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi
#define DSL CONFIG_DE2104X_DSL
#endif
-#define DE_RX_RING_SIZE 64
+#define DE_RX_RING_SIZE 128
#define DE_TX_RING_SIZE 64
#define DE_RING_BYTES \
((sizeof(struct de_desc) * DE_RX_RING_SIZE) + \
--
2.25.1
Hi Sascha,
On Tue, Sep 29, 2020 at 03:30:05AM +0200, Sasha Levin wrote:
> From: Helmut Grohne <[email protected]>
>
> [ Upstream commit edecfa98f602a597666e3c5cab2677ada38d93c5 ]
>
> Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
> property should be specified on port nodes. However, the microchip
> drivers read it from the switch node.
>
> Let the driver use the per-port property and fall back to the old
> location with a warning.
>
> Fix in-tree users.
I don't think this patch is useful for stable users. It corrects a
device tree layout issue. Any existing users of the functionality will
have an odd, but working device tree and that will continue working
(with a warning) after applying this patch. It just has a property on
the "wrong" node. I don't think I'd like to update my device tree in a
stable update.
If you apply it anyway, please also apply a fixup:
https://lore.kernel.org/netdev/20200924083746.GA9410@laureti-dev/
Helmut
Hi Sasha,
On Mon, Sep 28, 2020 at 09:30:25PM -0400, Sasha Levin wrote:
> From: Sascha Hauer <[email protected]>
>
> [ Upstream commit 530b5affc675ade5db4a03f04ed7cd66806c8a1a ]
>
> spi_unregister_controller() not only unregisters the controller, but
> also frees the controller. This will free the driver data with it, so
> we must not access it later dspi_remove().
>
> Solve this by allocating the driver data separately from the SPI
> controller.
>
> Signed-off-by: Sascha Hauer <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Mark Brown <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/spi/spi-fsl-dspi.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
This patch causes a regression and shouldn't be applied without the fix
in https://lkml.org/lkml/2020/9/28/300.
Sascha
> index 91c6affe139c9..aae9f9a7aea6c 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -1273,11 +1273,14 @@ static int dspi_probe(struct platform_device *pdev)
> void __iomem *base;
> bool big_endian;
>
> - ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
> + dspi = devm_kzalloc(&pdev->dev, sizeof(*dspi), GFP_KERNEL);
> + if (!dspi)
> + return -ENOMEM;
> +
> + ctlr = spi_alloc_master(&pdev->dev, 0);
> if (!ctlr)
> return -ENOMEM;
>
> - dspi = spi_controller_get_devdata(ctlr);
> dspi->pdev = pdev;
> dspi->ctlr = ctlr;
>
> @@ -1414,7 +1417,7 @@ static int dspi_probe(struct platform_device *pdev)
> if (dspi->devtype_data->trans_mode != DSPI_DMA_MODE)
> ctlr->ptp_sts_supported = true;
>
> - platform_set_drvdata(pdev, ctlr);
> + platform_set_drvdata(pdev, dspi);
>
> ret = spi_register_controller(ctlr);
> if (ret != 0) {
> @@ -1437,8 +1440,7 @@ static int dspi_probe(struct platform_device *pdev)
>
> static int dspi_remove(struct platform_device *pdev)
> {
> - struct spi_controller *ctlr = platform_get_drvdata(pdev);
> - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
> + struct fsl_dspi *dspi = platform_get_drvdata(pdev);
>
> /* Disconnect from the SPI framework */
> spi_unregister_controller(dspi->ctlr);
> --
> 2.25.1
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On Tue, Sep 29, 2020 at 07:56:30AM +0200, Helmut Grohne wrote:
>Hi Sascha,
>
>On Tue, Sep 29, 2020 at 03:30:05AM +0200, Sasha Levin wrote:
>> From: Helmut Grohne <[email protected]>
>>
>> [ Upstream commit edecfa98f602a597666e3c5cab2677ada38d93c5 ]
>>
>> Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
>> property should be specified on port nodes. However, the microchip
>> drivers read it from the switch node.
>>
>> Let the driver use the per-port property and fall back to the old
>> location with a warning.
>>
>> Fix in-tree users.
>
>I don't think this patch is useful for stable users. It corrects a
>device tree layout issue. Any existing users of the functionality will
>have an odd, but working device tree and that will continue working
>(with a warning) after applying this patch. It just has a property on
>the "wrong" node. I don't think I'd like to update my device tree in a
>stable update.
I've dropped it, thanks!
--
Thanks,
Sasha
On Tue, Sep 29, 2020 at 08:33:34AM +0000, Charles Keepax wrote:
>On Mon, Sep 28, 2020 at 09:30:11PM -0400, Sasha Levin wrote:
>> From: Charles Keepax <[email protected]>
>>
>> [ Upstream commit 94cc89eb8fa5039fcb6e3e3d50f929ddcccee095 ]
>>
>> In regmap_debugfs_init the initialisation of the debugfs is delayed
>> if the root node isn't ready yet. Most callers of regmap_debugfs_init
>> pass the name from the regmap_config, which is considered temporary
>> ie. may be unallocated after the regmap_init call returns. This leads
>> to a potential use after free, where config->name has been freed by
>> the time it is used in regmap_debugfs_initcall.
>>
>
>Afraid this patch had some issues if you are back porting it you
>definitely need to take these two patches as well:
>
>commit 1d512ee861b80da63cbc501b973c53131aa22f29
>regmap: debugfs: Fix more error path regressions
Looks like 1d512ee861b is queued for the merge window even though it's a
bugfix for this release?
I'm going to drop this patch.
--
Thanks,
Sasha
On Tue, Sep 29, 2020 at 08:22:16AM +0200, Sascha Hauer wrote:
>Hi Sasha,
>
>On Mon, Sep 28, 2020 at 09:30:25PM -0400, Sasha Levin wrote:
>> From: Sascha Hauer <[email protected]>
>>
>> [ Upstream commit 530b5affc675ade5db4a03f04ed7cd66806c8a1a ]
>>
>> spi_unregister_controller() not only unregisters the controller, but
>> also frees the controller. This will free the driver data with it, so
>> we must not access it later dspi_remove().
>>
>> Solve this by allocating the driver data separately from the SPI
>> controller.
>>
>> Signed-off-by: Sascha Hauer <[email protected]>
>> Link: https://lore.kernel.org/r/[email protected]
>> Signed-off-by: Mark Brown <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>> ---
>> drivers/spi/spi-fsl-dspi.c | 12 +++++++-----
>> 1 file changed, 7 insertions(+), 5 deletions(-)
>
>This patch causes a regression and shouldn't be applied without the fix
>in https://lkml.org/lkml/2020/9/28/300.
Looks like the fix didn't make it yet, so I'll drop the patch.
--
Thanks,
Sasha