BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for Banana Pro.
Signed-off-by: Hermann Lauer <[email protected]>
---
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
Dne četrtek, 21. januar 2021 ob 18:08:36 CET je Hermann Lauer napisal(a):
> BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> packet loss rates. The realtek phy driver overrides the settings of the
> pull ups for the delays, so fix this for Banana Pro.
>
> Signed-off-by: Hermann Lauer <[email protected]>
Much better. Now the only thing missing is "Fixes" tag, which references
commit which introduced the issue. Probably this will be the commit which
added ethernet node. This tag is important for deciding which commits should
be backported to stable releases. Take a look in v1 for M2U fixes tag.
Btw, each version should have changelog under "---" line, so maintainers and
reviewers know what changed.
Best regards,
Jernej
On Fri, Jan 22, 2021 at 3:54 AM Jernej Škrabec <[email protected]> wrote:
>
> Dne četrtek, 21. januar 2021 ob 18:08:36 CET je Hermann Lauer napisal(a):
> > BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> > packet loss rates. The realtek phy driver overrides the settings of the
> > pull ups for the delays, so fix this for Banana Pro.
> >
> > Signed-off-by: Hermann Lauer <[email protected]>
>
> Much better. Now the only thing missing is "Fixes" tag, which references
> commit which introduced the issue. Probably this will be the commit which
> added ethernet node. This tag is important for deciding which commits should
> be backported to stable releases. Take a look in v1 for M2U fixes tag.
>
> Btw, each version should have changelog under "---" line, so maintainers and
> reviewers know what changed.
The subject line should also be more concise. "Fix ethernet phy-mode" reads
much better than "Fix ethernet node", which could mean a number of things.
ChenYu
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <[email protected]>
---
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
packet loss rates. The realtek phy driver overrides the settings of the
pull ups for the delays, so fix this for BananaPro.
Fix the phy-mode description to correctly reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").
Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
Signed-off-by: Hermann Lauer <[email protected]>
---
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
On Thu, Jan 28, 2021 at 12:18:42PM +0100, [email protected] wrote:
> BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> packet loss rates. The realtek phy driver overrides the settings of the
> pull ups for the delays, so fix this for BananaPro.
>
> Fix the phy-mode description to correctly reflect this so that the
> implementation doesn't reconfigure the delays incorrectly. This
> happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> rx/tx delay config").
>
> Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
> Signed-off-by: Hermann Lauer <[email protected]>
Applied since it's a fix simple enough, but please provide a changelog
between versions.
Maxime
On Thu, Jan 28, 2021 at 03:59:37PM +0100, Maxime Ripard wrote:
> On Thu, Jan 28, 2021 at 12:18:42PM +0100, [email protected] wrote:
> > BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> > packet loss rates. The realtek phy driver overrides the settings of the
> > pull ups for the delays, so fix this for BananaPro.
> >
> > Fix the phy-mode description to correctly reflect this so that the
> > implementation doesn't reconfigure the delays incorrectly. This
> > happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> > rx/tx delay config").
> >
> > Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
> > Signed-off-by: Hermann Lauer <[email protected]>
>
> Applied since it's a fix simple enough, but please provide a changelog
> between versions.
v3 added the correct fixes tag, where the problem originated (initial commit
of banana pro device tree). That worked in the past until a change in
the phy device driver for realtek phy on banana pro overrode the
phyical configuration of the hardware pull-ups.
v4 added the commit which implemented that driver change (shamelessly stolen
from the commit of the fix of the identical problem on the banana pi)
Thanks,
greetings
Hermann
--
Administration/Zentrale Dienste, Interdiziplinaeres
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 205; 69120 Heidelberg; Tel: (06221)54-14405 Fax: -14427
Email: [email protected]
On Mon, Feb 01, 2021 at 01:08:03PM +0100, Hermann Lauer wrote:
> On Thu, Jan 28, 2021 at 03:59:37PM +0100, Maxime Ripard wrote:
> > On Thu, Jan 28, 2021 at 12:18:42PM +0100, [email protected] wrote:
> > > BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> > > packet loss rates. The realtek phy driver overrides the settings of the
> > > pull ups for the delays, so fix this for BananaPro.
> > >
> > > Fix the phy-mode description to correctly reflect this so that the
> > > implementation doesn't reconfigure the delays incorrectly. This
> > > happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> > > rx/tx delay config").
> > >
> > > Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
> > > Signed-off-by: Hermann Lauer <[email protected]>
> >
> > Applied since it's a fix simple enough, but please provide a changelog
> > between versions.
>
> v3 added the correct fixes tag, where the problem originated (initial commit
> of banana pro device tree). That worked in the past until a change in
> the phy device driver for realtek phy on banana pro overrode the
> phyical configuration of the hardware pull-ups.
>
> v4 added the commit which implemented that driver change (shamelessly stolen
> from the commit of the fix of the identical problem on the banana pi)
Thanks :)
For future patches make sure to have that description either in a cover
letter or below the --- after your commit log
Maxime