This is the start of the stable review cycle for the 4.14.245 release.
There are 64 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu 26 Aug 2021 05:04:55 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.244
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
Thanks,
Sasha
-------------
Pseudo-Shortlog of commits:
Andy Shevchenko (1):
ptp_pch: Restore dependency on PCI
Babu Moger (1):
x86/resctrl: Fix default monitoring groups reporting
Chris Lesiak (1):
iio: humidity: hdc100x: Add margin to the conversion time
Colin Ian King (1):
iio: adc: Fix incorrect exit of for-loop
DENG Qingfang (1):
net: dsa: mt7530: add the missing RxUnicast MIB counter
Dan Williams (1):
ACPI: NFIT: Fix support for virtual SPA ranges
Dave Gerlach (1):
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
Dinghao Liu (1):
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
Dongliang Mu (1):
ipack: tpci200: fix many double free issues in tpci200_pci_probe
Greg Kroah-Hartman (1):
i2c: dev: zero out array used for i2c reads from userspace
Harshvardhan Jha (1):
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
Ivan T. Ivanov (1):
net: usb: lan78xx: don't modify phy_device state concurrently
Jakub Kicinski (1):
bnxt: don't lock the tx queue from napi poll
Jaroslav Kysela (1):
ALSA: hda - fix the 'Capture Switch' value change notifications
Jeff Layton (2):
locks: print a warning when mount fails due to lack of "mand" support
fs: warn about impending deprecation of mandatory locks
Johannes Berg (1):
mac80211: drop data frames without key on encrypted links
Jouni Malinen (5):
ath: Use safer key clearing with key cache entries
ath9k: Clear key cache explicitly on disabling hardware
ath: Export ath_hw_keysetmac()
ath: Modify ath_key_delete() to not need full key entry
ath9k: Postpone key cache entry deletion for TXQ frames reference it
Longpeng(Mike) (1):
vsock/virtio: avoid potential deadlock when vsock device remove
Maxim Levitsky (2):
KVM: nSVM: always intercept VMLOAD/VMSAVE when nested (CVE-2021-3656)
KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl
(CVE-2021-3653)
Maximilian Heyne (1):
xen/events: Fix race in set_evtchn_to_irq
Nathan Chancellor (1):
vmlinux.lds.h: Handle clang's module.{c,d}tor sections
Neal Cardwell (1):
tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B
packets
NeilBrown (1):
btrfs: prevent rename2 from exchanging a subvol with a directory from
different parents
Ole Bjørn Midtbø (1):
Bluetooth: hidp: use correct wait queue when removing ctrl_wait
Pali Rohár (1):
ppp: Fix generating ifname when empty IFLA_IFNAME is specified
Pavel Skripkin (1):
net: 6pack: fix slab-out-of-bounds in decode_data
Peter Ujfalusi (1):
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller
is not yet available
Pu Lehui (1):
powerpc/kprobes: Fix kprobe Oops happens in booke
Randy Dunlap (2):
x86/tools: Fix objdump version check again
dccp: add do-while-0 stubs for dccp_pr_debug macros
Richard Fitzgerald (4):
ASoC: cs42l42: Correct definition of ADC Volume control
ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_J
ASoC: cs42l42: Fix inversion of ADC Notch Switch control
ASoC: cs42l42: Remove duplicate control for WNF filter frequency
Roi Dayan (1):
psample: Add a fwd declaration for skbuff
Saravana Kannan (2):
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Handle -EPROBE_DEFER correctly
Sasha Levin (1):
Linux 4.14.245-rc1
Sergey Marinkevich (1):
netfilter: nft_exthdr: fix endianness of tcp option cast
Sreekanth Reddy (1):
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
Sudeep Holla (1):
ARM: dts: nomadik: Fix up interrupt controller node names
Takashi Iwai (2):
ASoC: intel: atom: Fix reference to PCM buffer address
ASoC: intel: atom: Fix breakage for PCM buffer address setup
Takeshi Misawa (1):
net: Fix memory leak in ieee802154_raw_deliver
Thomas Gleixner (9):
PCI/MSI: Enable and mask MSI-X early
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Correct misleading comments
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Enforce MSI[X] entry updates to be visible
x86/fpu: Make init_fpstate correct with optimized XSAVE
Vincent Whitchurch (1):
mmc: dw_mmc: Fix hang on data CRC error
Xie Yongji (1):
vhost: Fix the calculation in vhost_overflow()
Yang Yingliang (1):
net: bridge: fix memleak in br_add_if()
Ye Bin (1):
scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
Yu Kuai (1):
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
.../filesystems/mandatory-locking.txt | 10 ++
Makefile | 4 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 +-
arch/powerpc/kernel/kprobes.c | 3 +-
arch/x86/include/asm/fpu/internal.h | 30 ++---
arch/x86/include/asm/svm.h | 2 +
arch/x86/kernel/cpu/intel_rdt_monitor.c | 27 ++--
arch/x86/kernel/fpu/xstate.c | 38 +++++-
arch/x86/kvm/svm.c | 18 ++-
arch/x86/tools/chkobjdump.awk | 1 +
drivers/acpi/nfit/core.c | 3 +
drivers/base/core.c | 1 +
drivers/dma/of-dma.c | 9 +-
drivers/dma/sh/usb-dmac.c | 2 +-
drivers/i2c/i2c-dev.c | 5 +-
drivers/iio/adc/palmas_gpadc.c | 4 +-
drivers/iio/humidity/hdc100x.c | 6 +-
drivers/ipack/carriers/tpci200.c | 36 +++---
drivers/mmc/host/dw_mmc.c | 6 +-
drivers/net/dsa/mt7530.c | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 54 ++++----
.../ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +-
drivers/net/hamradio/6pack.c | 6 +
drivers/net/phy/mdio-mux.c | 36 ++++--
drivers/net/ppp/ppp_generic.c | 2 +-
drivers/net/usb/lan78xx.c | 16 ++-
drivers/net/wireless/ath/ath.h | 3 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 95 +++++++++++++-
drivers/net/wireless/ath/key.c | 41 +++---
drivers/pci/msi.c | 120 ++++++++++++------
drivers/ptp/Kconfig | 3 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 +-
drivers/scsi/megaraid/megaraid_mm.c | 21 ++-
drivers/scsi/scsi_scan.c | 3 +-
drivers/vhost/vhost.c | 10 +-
drivers/xen/events/events_base.c | 20 ++-
fs/btrfs/inode.c | 10 +-
fs/namespace.c | 15 ++-
include/asm-generic/vmlinux.lds.h | 1 +
include/linux/device.h | 1 +
include/linux/msi.h | 2 +-
include/net/psample.h | 2 +
net/bluetooth/hidp/core.c | 2 +-
net/bridge/br_if.c | 2 +
net/dccp/dccp.h | 6 +-
net/ieee802154/socket.c | 7 +-
net/ipv4/tcp_bbr.c | 2 +-
net/mac80211/debugfs_sta.c | 1 +
net/mac80211/key.c | 1 +
net/mac80211/sta_info.h | 1 +
net/mac80211/tx.c | 12 +-
net/netfilter/nft_exthdr.c | 8 +-
net/vmw_vsock/virtio_transport.c | 7 +-
sound/pci/hda/hda_generic.c | 10 +-
sound/soc/codecs/cs42l42.c | 18 +--
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 3 +-
60 files changed, 520 insertions(+), 246 deletions(-)
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 64324bac750b84ca54711fb7d332132fcdb87293 ]
The driver has no support for left-justified protocol so it should
not have been allowing this to be passed to cs42l42_set_dai_fmt().
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 1d997b2df477..bcfc32efef07 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -793,7 +793,6 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
- case SND_SOC_DAIFMT_LEFT_J:
break;
default:
return -EINVAL;
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 519133debcc19f5c834e7e28480b60bdc234fe02 ]
I got a memleak report:
BUG: memory leak
unreferenced object 0x607ee521a658 (size 240):
comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s)
hex dump (first 32 bytes, cpu 1):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693
[<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline]
[<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611
[<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline]
[<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487
[<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457
[<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550
[<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
On error path of br_add_if(), p->mcast_stats allocated in
new_nbp() need be freed, or it will be leaked.
Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_if.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 9a36592cf20f..c8bf044ab534 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -519,6 +519,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
err = dev_set_allmulti(dev, 1);
if (err) {
+ br_multicast_del_port(p);
kfree(p); /* kobject not yet init'd, manually free */
goto err1;
}
@@ -623,6 +624,7 @@ err4:
err3:
sysfs_remove_link(br->ifobj, p->dev->name);
err2:
+ br_multicast_del_port(p);
kobject_put(&p->kobj);
dev_set_allmulti(dev, -1);
err1:
--
2.30.2
From: Greg Kroah-Hartman <[email protected]>
commit 86ff25ed6cd8240d18df58930bd8848b19fce308 upstream.
If an i2c driver happens to not provide the full amount of data that a
user asks for, it is possible that some uninitialized data could be sent
to userspace. While all in-kernel drivers look to be safe, just be sure
by initializing the buffer to zero before it is passed to the i2c driver
so that any future drivers will not have this issue.
Also properly copy the amount of data recvieved to the userspace buffer,
as pointed out by Dan Carpenter.
Reported-by: Eric Dumazet <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/i2c-dev.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index c4066276eb7b..b7f9fb00f695 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -148,7 +148,7 @@ static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
if (count > 8192)
count = 8192;
- tmp = kmalloc(count, GFP_KERNEL);
+ tmp = kzalloc(count, GFP_KERNEL);
if (tmp == NULL)
return -ENOMEM;
@@ -157,7 +157,8 @@ static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
ret = i2c_master_recv(client, tmp, count);
if (ret >= 0)
- ret = copy_to_user(buf, tmp, count) ? -EFAULT : ret;
+ if (copy_to_user(buf, tmp, ret))
+ ret = -EFAULT;
kfree(tmp);
return ret;
}
--
2.30.2
From: Dan Williams <[email protected]>
commit b93dfa6bda4d4e88e5386490f2b277a26958f9d3 upstream.
Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as
a special case and not match Region Mapping Structures that use 0 to
indicate that they are not mapped. Without this fix some platform BIOS
descriptions of "virtual disk" ranges do not result in the pmem driver
attaching to the range.
Details:
In addition to typical persistent memory ranges, the ACPI NFIT may also
convey "virtual" ranges. These ranges are indicated by a UUID in the SPA
Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD,
UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The
critical difference between virtual ranges and UUID_PERSISTENT_MEMORY,
is that virtual do not support associations with Region Mapping
Structures. For this reason the "index" value of virtual SPA Range
Structures is allowed to be 0. If a platform BIOS decides to represent
NVDIMMs with disconnected "Region Mapping Structures" (range-index ==
0), the kernel may falsely associate them with standalone ranges where
the "SPA Range Structure Index" is also zero. When this happens the
driver may falsely require labels where "virtual disks" are expected to
be label-less. I.e. "label-less" is where the namespace-range ==
region-range and the pmem driver attaches with no user action to create
a namespace.
Cc: Jacek Zloch <[email protected]>
Cc: Lukasz Sobieraj <[email protected]>
Cc: "Lee, Chun-Yi" <[email protected]>
Cc: <[email protected]>
Fixes: c2f32acdf848 ("acpi, nfit: treat virtual ramdisk SPA as pmem region")
Reported-by: Krzysztof Rusocki <[email protected]>
Reported-by: Damian Bassa <[email protected]>
Reviewed-by: Jeff Moyer <[email protected]>
Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/nfit/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
index 20fd197ef74c..bfa163e9d6c3 100644
--- a/drivers/acpi/nfit/core.c
+++ b/drivers/acpi/nfit/core.c
@@ -2454,6 +2454,9 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc,
struct acpi_nfit_memory_map *memdev = nfit_memdev->memdev;
struct nd_mapping_desc *mapping;
+ /* range index 0 == unmapped in SPA or invalid-SPA */
+ if (memdev->range_index == 0 || spa->range_index == 0)
+ continue;
if (memdev->range_index != spa->range_index)
continue;
if (count >= ND_MAX_MAPPINGS) {
--
2.30.2
From: Babu Moger <[email protected]>
commit 064855a69003c24bd6b473b367d364e418c57625 upstream.
Creating a new sub monitoring group in the root /sys/fs/resctrl leads to
getting the "Unavailable" value for mbm_total_bytes and mbm_local_bytes
on the entire filesystem.
Steps to reproduce:
1. mount -t resctrl resctrl /sys/fs/resctrl/
2. cd /sys/fs/resctrl/
3. cat mon_data/mon_L3_00/mbm_total_bytes
23189832
4. Create sub monitor group:
mkdir mon_groups/test1
5. cat mon_data/mon_L3_00/mbm_total_bytes
Unavailable
When a new monitoring group is created, a new RMID is assigned to the
new group. But the RMID is not active yet. When the events are read on
the new RMID, it is expected to report the status as "Unavailable".
When the user reads the events on the default monitoring group with
multiple subgroups, the events on all subgroups are consolidated
together. Currently, if any of the RMID reads report as "Unavailable",
then everything will be reported as "Unavailable".
Fix the issue by discarding the "Unavailable" reads and reporting all
the successful RMID reads. This is not a problem on Intel systems as
Intel reports 0 on Inactive RMIDs.
Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Reported-by: Paweł Szulik <[email protected]>
Signed-off-by: Babu Moger <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Reinette Chatre <[email protected]>
Cc: [email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213311
Link: https://lkml.kernel.org/r/162793309296.9224.15871659871696482080.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel_rdt_monitor.c | 27 ++++++++++++-------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/arch/x86/kernel/cpu/intel_rdt_monitor.c b/arch/x86/kernel/cpu/intel_rdt_monitor.c
index 30827510094b..2d324cd1dea7 100644
--- a/arch/x86/kernel/cpu/intel_rdt_monitor.c
+++ b/arch/x86/kernel/cpu/intel_rdt_monitor.c
@@ -225,15 +225,14 @@ void free_rmid(u32 rmid)
list_add_tail(&entry->list, &rmid_free_lru);
}
-static int __mon_event_count(u32 rmid, struct rmid_read *rr)
+static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
{
u64 chunks, shift, tval;
struct mbm_state *m;
tval = __rmid_read(rmid, rr->evtid);
if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) {
- rr->val = tval;
- return -EINVAL;
+ return tval;
}
switch (rr->evtid) {
case QOS_L3_OCCUP_EVENT_ID:
@@ -245,12 +244,6 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
case QOS_L3_MBM_LOCAL_EVENT_ID:
m = &rr->d->mbm_local[rmid];
break;
- default:
- /*
- * Code would never reach here because
- * an invalid event id would fail the __rmid_read.
- */
- return -EINVAL;
}
if (rr->first) {
@@ -278,23 +271,29 @@ void mon_event_count(void *info)
struct rdtgroup *rdtgrp, *entry;
struct rmid_read *rr = info;
struct list_head *head;
+ u64 ret_val;
rdtgrp = rr->rgrp;
- if (__mon_event_count(rdtgrp->mon.rmid, rr))
- return;
+ ret_val = __mon_event_count(rdtgrp->mon.rmid, rr);
/*
- * For Ctrl groups read data from child monitor groups.
+ * For Ctrl groups read data from child monitor groups and
+ * add them together. Count events which are read successfully.
+ * Discard the rmid_read's reporting errors.
*/
head = &rdtgrp->mon.crdtgrp_list;
if (rdtgrp->type == RDTCTRL_GROUP) {
list_for_each_entry(entry, head, mon.crdtgrp_list) {
- if (__mon_event_count(entry->mon.rmid, rr))
- return;
+ if (__mon_event_count(entry->mon.rmid, rr) == 0)
+ ret_val = 0;
}
}
+
+ /* Report error if none of rmid_reads are successful */
+ if (ret_val)
+ rr->val = ret_val;
}
static void mbm_update(struct rdt_domain *d, int rmid)
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 8b353bbeae20e2214c9d9d88bcb2fda4ba145d83 ]
The driver was defining two ALSA controls that both change the same
register field for the wind noise filter corner frequency. The filter
response has two corners, at different frequencies, and the duplicate
controls most likely were an attempt to be able to set the value using
either of the frequencies.
However, having two controls changing the same field can be problematic
and it is unnecessary. Both frequencies are related to each other so
setting one implies exactly what the other would be.
Removing a control affects user-side code, but there is currently no
known use of the removed control so it would be best to remove it now
before it becomes a problem.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 52f51b86af91..e6eeecc5446e 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -424,15 +424,6 @@ static SOC_ENUM_SINGLE_DECL(cs42l42_wnf3_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
CS42L42_ADC_WNF_CF_SHIFT,
cs42l42_wnf3_freq_text);
-static const char * const cs42l42_wnf05_freq_text[] = {
- "280Hz", "315Hz", "350Hz", "385Hz",
- "420Hz", "455Hz", "490Hz", "525Hz"
-};
-
-static SOC_ENUM_SINGLE_DECL(cs42l42_wnf05_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
- CS42L42_ADC_WNF_CF_SHIFT,
- cs42l42_wnf05_freq_text);
-
static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
/* ADC Volume and Filter Controls */
SOC_SINGLE("ADC Notch Switch", CS42L42_ADC_CTL,
@@ -450,7 +441,6 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
CS42L42_ADC_HPF_EN_SHIFT, true, false),
SOC_ENUM("HPF Corner Freq", cs42l42_hpf_freq_enum),
SOC_ENUM("WNF 3dB Freq", cs42l42_wnf3_freq_enum),
- SOC_ENUM("WNF 05dB Freq", cs42l42_wnf05_freq_enum),
/* DAC Volume and Filter Controls */
SOC_SINGLE("DACA Invert Switch", CS42L42_DAC_CTL1,
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 438553958ba19296663c6d6583d208dfb6792830 upstream.
The ordering of MSI-X enable in hardware is dysfunctional:
1) MSI-X is disabled in the control register
2) Various setup functions
3) pci_msi_setup_msi_irqs() is invoked which ends up accessing
the MSI-X table entries
4) MSI-X is enabled and masked in the control register with the
comment that enabling is required for some hardware to access
the MSI-X table
Step #4 obviously contradicts #3. The history of this is an issue with the
NIU hardware. When #4 was introduced the table access actually happened in
msix_program_entries() which was invoked after enabling and masking MSI-X.
This was changed in commit d71d6432e105 ("PCI/MSI: Kill redundant call of
irq_set_msi_desc() for MSI-X interrupts") which removed the table write
from msix_program_entries().
Interestingly enough nobody noticed and either NIU still works or it did
not get any testing with a kernel 3.19 or later.
Nevertheless this is inconsistent and there is no reason why MSI-X can't be
enabled and masked in the control register early on, i.e. move step #4
above to step #1. This preserves the NIU workaround and has no side effects
on other hardware.
Fixes: d71d6432e105 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 2a203055b16e..2c7766c87a4d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -743,18 +743,25 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
u16 control;
void __iomem *base;
- /* Ensure MSI-X is disabled while it is set up */
- pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+ /*
+ * Some devices require MSI-X to be enabled before the MSI-X
+ * registers can be accessed. Mask all the vectors to prevent
+ * interrupts coming in before they're fully set up.
+ */
+ pci_msix_clear_and_set_ctrl(dev, 0, PCI_MSIX_FLAGS_MASKALL |
+ PCI_MSIX_FLAGS_ENABLE);
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
/* Request & Map MSI-X table region */
base = msix_map_region(dev, msix_table_size(control));
- if (!base)
- return -ENOMEM;
+ if (!base) {
+ ret = -ENOMEM;
+ goto out_disable;
+ }
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
- return ret;
+ goto out_disable;
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
@@ -765,14 +772,6 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
if (ret)
goto out_free;
- /*
- * Some devices require MSI-X to be enabled before we can touch the
- * MSI-X registers. We need to mask all the vectors to prevent
- * interrupts coming in before they're fully set up.
- */
- pci_msix_clear_and_set_ctrl(dev, 0,
- PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE);
-
msix_program_entries(dev, entries);
ret = populate_msi_sysfs(dev);
@@ -807,6 +806,9 @@ out_avail:
out_free:
free_msi_irqs(dev);
+out_disable:
+ pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+
return ret;
}
--
2.30.2
From: Roi Dayan <[email protected]>
[ Upstream commit beb7f2de5728b0bd2140a652fa51f6ad85d159f7 ]
Without this there is a warning if source files include psample.h
before skbuff.h or doesn't include it at all.
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: Roi Dayan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/psample.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/net/psample.h b/include/net/psample.h
index 94cb37a7bf75..796f01e5635d 100644
--- a/include/net/psample.h
+++ b/include/net/psample.h
@@ -18,6 +18,8 @@ struct psample_group {
struct psample_group *psample_group_get(struct net *net, u32 group_num);
void psample_group_put(struct psample_group *group);
+struct sk_buff;
+
#if IS_ENABLED(CONFIG_PSAMPLE)
void psample_sample_packet(struct psample_group *group, struct sk_buff *skb,
--
2.30.2
From: Neal Cardwell <[email protected]>
[ Upstream commit 6de035fec045f8ae5ee5f3a02373a18b939e91fb ]
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <[email protected]>
Reviewed-by: Yuchung Cheng <[email protected]>
Reviewed-by: Kevin Yang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bbr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c
index bda10f7aea32..76a9652d90f2 100644
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -840,7 +840,7 @@ static void bbr_init(struct sock *sk)
bbr->prior_cwnd = 0;
bbr->tso_segs_goal = 0; /* default segs per skb until first ACK */
bbr->rtt_cnt = 0;
- bbr->next_rtt_delivered = 0;
+ bbr->next_rtt_delivered = tp->delivered;
bbr->prev_ca_state = TCP_CA_Open;
bbr->packet_conservation = 0;
--
2.30.2
From: Takeshi Misawa <[email protected]>
[ Upstream commit 1090340f7ee53e824fd4eef66a4855d548110c5b ]
If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked.
Fix this, by freeing sk_receive_queue in sk->sk_destruct().
syzbot report:
BUG: memory leak
unreferenced object 0xffff88810f644600 (size 232):
comm "softirq", pid 0, jiffies 4294967032 (age 81.270s)
hex dump (first 32 bytes):
10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K.....
00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K.....
backtrace:
[<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496
[<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline]
[<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070
[<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384
[<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498
[<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline]
[<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662
[<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline]
[<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline]
[<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline]
[<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284
[<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35
[<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557
[<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345
[<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline]
[<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235
[<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198
[<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline]
[<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline]
[<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221
[<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295
[<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674
[<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977
[<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline]
[<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline]
[<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985
Fixes: 9ec767160357 ("net: add IEEE 802.15.4 socket family implementation")
Reported-and-tested-by: [email protected]
Signed-off-by: Takeshi Misawa <[email protected]>
Acked-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ieee802154/socket.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c
index e95004b507d3..9d46d9462129 100644
--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -985,6 +985,11 @@ static const struct proto_ops ieee802154_dgram_ops = {
#endif
};
+static void ieee802154_sock_destruct(struct sock *sk)
+{
+ skb_queue_purge(&sk->sk_receive_queue);
+}
+
/* Create a socket. Initialise the socket, blank the addresses
* set the state.
*/
@@ -1025,7 +1030,7 @@ static int ieee802154_create(struct net *net, struct socket *sock,
sock->ops = ops;
sock_init_data(sock, sk);
- /* FIXME: sk->sk_destruct */
+ sk->sk_destruct = ieee802154_sock_destruct;
sk->sk_family = PF_IEEE802154;
/* Checksums on by default */
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit ee86f680ff4c9b406d49d4e22ddf10805b8a2137 ]
The ADC volume is a signed 8-bit number with range -97 to +12,
with -97 being mute. Use a SOC_SINGLE_S8_TLV() to define this
and fix the DECLARE_TLV_DB_SCALE() to have the correct start and
mute flag.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 39adb2fdd003..1d997b2df477 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -404,7 +404,7 @@ static const struct regmap_config cs42l42_regmap = {
.cache_type = REGCACHE_RBTREE,
};
-static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
+static DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 100, true);
static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
static const char * const cs42l42_hpf_freq_text[] = {
@@ -443,8 +443,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
CS42L42_ADC_INV_SHIFT, true, false),
SOC_SINGLE("ADC Boost Switch", CS42L42_ADC_CTL,
CS42L42_ADC_DIG_BOOST_SHIFT, true, false),
- SOC_SINGLE_SX_TLV("ADC Volume", CS42L42_ADC_VOLUME,
- CS42L42_ADC_VOL_SHIFT, 0xA0, 0x6C, adc_tlv),
+ SOC_SINGLE_S8_TLV("ADC Volume", CS42L42_ADC_VOLUME, -97, 12, adc_tlv),
SOC_SINGLE("ADC WNF Switch", CS42L42_ADC_WNF_HPF_CTL,
CS42L42_ADC_WNF_EN_SHIFT, true, false),
SOC_SINGLE("ADC HPF Switch", CS42L42_ADC_WNF_HPF_CTL,
--
2.30.2
From: DENG Qingfang <[email protected]>
[ Upstream commit aff51c5da3208bd164381e1488998667269c6cf4 ]
Add the missing RxUnicast counter.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mt7530.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 58c16aa00a70..fdfef3a7c05a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -54,6 +54,7 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(2, 0x48, "TxBytes"),
MIB_DESC(1, 0x60, "RxDrop"),
MIB_DESC(1, 0x64, "RxFiltering"),
+ MIB_DESC(1, 0x68, "RxUnicast"),
MIB_DESC(1, 0x6c, "RxMulticast"),
MIB_DESC(1, 0x70, "RxBroadcast"),
MIB_DESC(1, 0x74, "RxAlignErr"),
--
2.30.2
From: Pu Lehui <[email protected]>
[ Upstream commit 43e8f76006592cb1573a959aa287c45421066f9c ]
When using kprobe on powerpc booke series processor, Oops happens
as show bellow:
/ # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events
/ # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
/ # sleep 1
[ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1]
[ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500
[ 50.077221] Modules linked in:
[ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524293d #21
[ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000
[ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000
[ 50.078675]
[ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001
[ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4
[ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000
[ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190
[ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0
[ 50.080638] Call Trace:
[ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable)
[ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110
[ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28
[ 50.081541] --- interrupt: c00 at 0x100a4d08
[ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003
[ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524293d)
[ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000
[ 50.082457]
[ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff
[ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4
[ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f8 10240000 00500000
[ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8
[ 50.083789] NIP [100a4d08] 0x100a4d08
[ 50.083917] LR [101b5234] 0x101b5234
[ 50.084042] --- interrupt: c00
[ 50.084238] Instruction dump:
[ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010
[ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048
[ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]---
[ 50.085678]
Trace/breakpoint trap
There is no real mode for booke arch and the MMU translation is
always on. The corresponding MSR_IS/MSR_DS bit in booke is used
to switch the address space, but not for real mode judgment.
Fixes: 21f8b2fa3ca5 ("powerpc/kprobes: Ignore traps that happened in real mode")
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/kprobes.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 07d3f3b40246..b8b62df102f1 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -279,7 +279,8 @@ int kprobe_handler(struct pt_regs *regs)
if (user_mode(regs))
return 0;
- if (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR))
+ if (!IS_ENABLED(CONFIG_BOOKE) &&
+ (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR)))
return 0;
/*
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 839ad22f755132838f406751439363c07272ad87 ]
Skip (omit) any version string info that is parenthesized.
Warning: objdump version 15) is older than 2.19
Warning: Skipping posttest.
where 'objdump -v' says:
GNU objdump (GNU Binutils; SUSE Linux Enterprise 15) 2.35.1.20201123-7.18
Fixes: 8bee738bb1979 ("x86: Fix objdump version check in chkobjdump.awk for different formats.")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/tools/chkobjdump.awk | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk
index fd1ab80be0de..a4cf678cf5c8 100644
--- a/arch/x86/tools/chkobjdump.awk
+++ b/arch/x86/tools/chkobjdump.awk
@@ -10,6 +10,7 @@ BEGIN {
/^GNU objdump/ {
verstr = ""
+ gsub(/\(.*\)/, "");
for (i = 3; i <= NF; i++)
if (match($(i), "^[0-9]")) {
verstr = $(i);
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 361fd37397f77578735907341579397d5bed0a2d upstream.
msi_mask_irq() takes a mask and a flags argument. The mask argument is used
to mask out bits from the cached mask and the flags argument to set bits.
Some places invoke it with a flags argument which sets bits which are not
used by the device, i.e. when the device supports up to 8 vectors a full
unmask in some places sets the mask to 0xFFFFFF00. While devices probably
do not care, it's still bad practice.
Fixes: 7ba1930db02f ("PCI MSI: Unmask MSI if setup failed")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 2c7766c87a4d..c69cd0dff301 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -619,21 +619,21 @@ static int msi_capability_init(struct pci_dev *dev, int nvec,
/* Configure MSI capability structure */
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
ret = msi_verify_entries(dev);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
ret = populate_msi_sysfs(dev);
if (ret) {
- msi_mask_irq(entry, mask, ~mask);
+ msi_mask_irq(entry, mask, 0);
free_msi_irqs(dev);
return ret;
}
@@ -897,7 +897,7 @@ static void pci_msi_shutdown(struct pci_dev *dev)
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
/* Keep cached state to be restored */
- __pci_msi_desc_mask_irq(desc, mask, ~mask);
+ __pci_msi_desc_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = desc->msi_attrib.default_irq;
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit da181dc974ad667579baece33c2c8d2d1e4558d5 upstream.
The specification (PCIe r5.0, sec 6.1.4.5) states:
For MSI-X, a function is permitted to cache Address and Data values
from unmasked MSI-X Table entries. However, anytime software unmasks a
currently masked MSI-X Table entry either by clearing its Mask bit or
by clearing the Function Mask bit, the function must update any Address
or Data values that it cached from that entry. If software changes the
Address or Data value of an entry while the entry is unmasked, the
result is undefined.
The Linux kernel's MSI-X support never enforced that the entry is masked
before the entry is modified hence the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Enforce the entry to be masked across the update.
There is no point in enforcing this to be handled at all possible call
sites as this is just pointless code duplication and the common update
function is the obvious place to enforce this.
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Reported-by: Kevin Tian <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 8a0c28906d8f..82c061269677 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -303,10 +303,25 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
void __iomem *base = pci_msix_desc_addr(entry);
+ bool unmasked = !(entry->masked & PCI_MSIX_ENTRY_CTRL_MASKBIT);
+
+ /*
+ * The specification mandates that the entry is masked
+ * when the message is modified:
+ *
+ * "If software changes the Address or Data value of an
+ * entry while the entry is unmasked, the result is
+ * undefined."
+ */
+ if (unmasked)
+ __pci_msix_desc_mask_irq(entry, PCI_MSIX_ENTRY_CTRL_MASKBIT);
writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
+
+ if (unmasked)
+ __pci_msix_desc_mask_irq(entry, 0);
} else {
int pos = dev->msi_cap;
u16 msgctl;
--
2.30.2
From: Takashi Iwai <[email protected]>
commit 2e6b836312a477d647a7920b56810a5a25f6c856 upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The address should be retrieved from runtime->dma_addr,
instead of substream->dma_buffer (and shouldn't use virt_to_phys).
Also, remove the line overriding runtime->dma_area superfluously,
which was already set up at the PCM buffer allocation.
Cc: Cezary Rojewski <[email protected]>
Cc: Pierre-Louis Bossart <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index cdc0f22a57ee..c877326cb0a6 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -135,7 +135,7 @@ static void sst_fill_alloc_params(struct snd_pcm_substream *substream,
snd_pcm_uframes_t period_size;
ssize_t periodbytes;
ssize_t buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- u32 buffer_addr = virt_to_phys(substream->dma_buffer.area);
+ u32 buffer_addr = substream->runtime->dma_addr;
channels = substream->runtime->channels;
period_size = substream->runtime->period_size;
@@ -241,7 +241,6 @@ static int sst_platform_alloc_stream(struct snd_pcm_substream *substream,
/* set codec params and inform SST driver the same */
sst_fill_pcm_params(substream, ¶m);
sst_fill_alloc_params(substream, &alloc_params);
- substream->runtime->dma_area = substream->dma_buffer.area;
str_params.sparams = param;
str_params.aparams = alloc_params;
str_params.codec = SST_CODEC_TYPE_PCM;
--
2.30.2
From: Pali Rohár <[email protected]>
[ Upstream commit 2459dcb96bcba94c08d6861f8a050185ff301672 ]
IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be
larger than length of string which contains.
Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME
was not specified at all or userspace passed empty nul-term string.
It is expected that if userspace does not specify ifname for new ppp netdev
then kernel generates one in format "ppp<id>" where id matches to the ppp
unit id which can be later obtained by PPPIOCGUNIT ioctl.
And it works in this way if IFLA_IFNAME is not specified at all. But it
does not work when IFLA_IFNAME is specified with empty string.
So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function
and correctly generates ifname based on ppp unit identifier if userspace
did not provided preferred ifname.
Without this patch when IFLA_IFNAME was specified with empty string then
kernel created a new ppp interface in format "ppp<id>" but id did not
match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some
number generated by __rtnl_newlink() function.
Signed-off-by: Pali Rohár <[email protected]>
Fixes: bb8082f69138 ("ppp: build ifname using unit identifier for rtnl based devices")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index f846c55f9df0..c6e067aae955 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -1139,7 +1139,7 @@ static int ppp_nl_newlink(struct net *src_net, struct net_device *dev,
* the PPP unit identifer as suffix (i.e. ppp<unit_id>). This allows
* userspace to infer the device name using to the PPPIOCGUNIT ioctl.
*/
- if (!tb[IFLA_IFNAME])
+ if (!tb[IFLA_IFNAME] || !nla_len(tb[IFLA_IFNAME]) || !*(char *)nla_data(tb[IFLA_IFNAME]))
conf.ifname_is_set = false;
err = ppp_dev_configure(src_net, dev, &conf);
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 7d5ec3d3612396dc6d4b76366d20ab9fc06f399f upstream.
When MSI-X is enabled the ordering of calls is:
msix_map_region();
msix_setup_entries();
pci_msi_setup_msi_irqs();
msix_program_entries();
This has a few interesting issues:
1) msix_setup_entries() allocates the MSI descriptors and initializes them
except for the msi_desc:masked member which is left zero initialized.
2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets
up the MSI interrupts which ends up in pci_write_msi_msg() unless the
interrupt chip provides its own irq_write_msi_msg() function.
3) msix_program_entries() does not do what the name suggests. It solely
updates the entries array (if not NULL) and initializes the masked
member for each MSI descriptor by reading the hardware state and then
masks the entry.
Obviously this has some issues:
1) The uninitialized masked member of msi_desc prevents the enforcement
of masking the entry in pci_write_msi_msg() depending on the cached
masked bit. Aside of that half initialized data is a NONO in general
2) msix_program_entries() only ensures that the actually allocated entries
are masked. This is wrong as experimentation with crash testing and
crash kernel kexec has shown.
This limited testing unearthed that when the production kernel had more
entries in use and unmasked when it crashed and the crash kernel
allocated a smaller amount of entries, then a full scan of all entries
found unmasked entries which were in use in the production kernel.
This is obviously a device or emulation issue as the device reset
should mask all MSI-X table entries, but obviously that's just part
of the paper specification.
Cure this by:
1) Masking all table entries in hardware
2) Initializing msi_desc::masked in msix_setup_entries()
3) Removing the mask dance in msix_program_entries()
4) Renaming msix_program_entries() to msix_update_entries() to
reflect the purpose of that function.
As the masking of unused entries has never been done the Fixes tag refers
to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 40 ++++++++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index ecf15f0ea295..8a0c28906d8f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -675,6 +675,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
{
struct cpumask *curmsk, *masks = NULL;
struct msi_desc *entry;
+ void __iomem *addr;
int ret, i;
if (affd)
@@ -694,6 +695,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
entry->msi_attrib.is_msix = 1;
entry->msi_attrib.is_64 = 1;
+
if (entries)
entry->msi_attrib.entry_nr = entries[i].entry;
else
@@ -701,6 +703,10 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
entry->msi_attrib.default_irq = dev->irq;
entry->mask_base = base;
+ addr = pci_msix_desc_addr(entry);
+ if (addr)
+ entry->masked = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL);
+
list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
if (masks)
curmsk++;
@@ -711,21 +717,27 @@ out:
return ret;
}
-static void msix_program_entries(struct pci_dev *dev,
- struct msix_entry *entries)
+static void msix_update_entries(struct pci_dev *dev, struct msix_entry *entries)
{
struct msi_desc *entry;
- int i = 0;
for_each_pci_msi_entry(entry, dev) {
- if (entries)
- entries[i++].vector = entry->irq;
- entry->masked = readl(pci_msix_desc_addr(entry) +
- PCI_MSIX_ENTRY_VECTOR_CTRL);
- msix_mask_irq(entry, 1);
+ if (entries) {
+ entries->vector = entry->irq;
+ entries++;
+ }
}
}
+static void msix_mask_all(void __iomem *base, int tsize)
+{
+ u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT;
+ int i;
+
+ for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE)
+ writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL);
+}
+
/**
* msix_capability_init - configure device's MSI-X capability
* @dev: pointer to the pci_dev data structure of MSI-X device function
@@ -740,9 +752,9 @@ static void msix_program_entries(struct pci_dev *dev,
static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
int nvec, const struct irq_affinity *affd)
{
- int ret;
- u16 control;
void __iomem *base;
+ int ret, tsize;
+ u16 control;
/*
* Some devices require MSI-X to be enabled before the MSI-X
@@ -754,12 +766,16 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
/* Request & Map MSI-X table region */
- base = msix_map_region(dev, msix_table_size(control));
+ tsize = msix_table_size(control);
+ base = msix_map_region(dev, tsize);
if (!base) {
ret = -ENOMEM;
goto out_disable;
}
+ /* Ensure that all table entries are masked. */
+ msix_mask_all(base, tsize);
+
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
goto out_disable;
@@ -773,7 +789,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
if (ret)
goto out_free;
- msix_program_entries(dev, entries);
+ msix_update_entries(dev, entries);
ret = populate_msi_sysfs(dev);
if (ret)
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit d28d4ad2a1aef27458b3383725bb179beb8d015c upstream.
No point in using the raw write function from shutdown. Preparatory change
to introduce proper serialization for the msi_desc::masked cache.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 93dd4c69cc46..034f60b75a6e 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -896,7 +896,7 @@ static void pci_msi_shutdown(struct pci_dev *dev)
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
- __pci_msi_desc_mask_irq(desc, mask, 0);
+ msi_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = desc->msi_attrib.default_irq;
--
2.30.2
From: Maxim Levitsky <[email protected]>
[ upstream commit c7dfa4009965a9b2d7b329ee970eb8da0d32f0bc ]
If L1 disables VMLOAD/VMSAVE intercepts, and doesn't enable
Virtual VMLOAD/VMSAVE (currently not supported for the nested hypervisor),
then VMLOAD/VMSAVE must operate on the L1 physical memory, which is only
possible by making L0 intercept these instructions.
Failure to do so allowed the nested guest to run VMLOAD/VMSAVE unintercepted,
and thus read/write portions of the host physical memory.
Fixes: 89c8a4984fc9 ("KVM: SVM: Enable Virtual VMLOAD VMSAVE feature")
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Maxim Levitsky <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 3571253b8690..0e6e158b8f8f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -389,6 +389,9 @@ static void recalc_intercepts(struct vcpu_svm *svm)
c->intercept_dr = h->intercept_dr | g->intercept_dr;
c->intercept_exceptions = h->intercept_exceptions | g->intercept_exceptions;
c->intercept = h->intercept | g->intercept;
+
+ c->intercept |= (1ULL << INTERCEPT_VMLOAD);
+ c->intercept |= (1ULL << INTERCEPT_VMSAVE);
}
static inline struct vmcb *get_host_vmcb(struct vcpu_svm *svm)
--
2.30.2
From: Maximilian Heyne <[email protected]>
[ Upstream commit 88ca2521bd5b4e8b83743c01a2d4cb09325b51e9 ]
There is a TOCTOU issue in set_evtchn_to_irq. Rows in the evtchn_to_irq
mapping are lazily allocated in this function. The check whether the row
is already present and the row initialization is not synchronized. Two
threads can at the same time allocate a new row for evtchn_to_irq and
add the irq mapping to the their newly allocated row. One thread will
overwrite what the other has set for evtchn_to_irq[row] and therefore
the irq mapping is lost. This will trigger a BUG_ON later in
bind_evtchn_to_cpu:
INFO: pci 0000:1a:15.4: [1d0f:8061] type 00 class 0x010802
INFO: nvme 0000:1a:12.1: enabling device (0000 -> 0002)
INFO: nvme nvme77: 1/0/0 default/read/poll queues
CRIT: kernel BUG at drivers/xen/events/events_base.c:427!
WARN: invalid opcode: 0000 [#1] SMP NOPTI
WARN: Workqueue: nvme-reset-wq nvme_reset_work [nvme]
WARN: RIP: e030:bind_evtchn_to_cpu+0xc2/0xd0
WARN: Call Trace:
WARN: set_affinity_irq+0x121/0x150
WARN: irq_do_set_affinity+0x37/0xe0
WARN: irq_setup_affinity+0xf6/0x170
WARN: irq_startup+0x64/0xe0
WARN: __setup_irq+0x69e/0x740
WARN: ? request_threaded_irq+0xad/0x160
WARN: request_threaded_irq+0xf5/0x160
WARN: ? nvme_timeout+0x2f0/0x2f0 [nvme]
WARN: pci_request_irq+0xa9/0xf0
WARN: ? pci_alloc_irq_vectors_affinity+0xbb/0x130
WARN: queue_request_irq+0x4c/0x70 [nvme]
WARN: nvme_reset_work+0x82d/0x1550 [nvme]
WARN: ? check_preempt_wakeup+0x14f/0x230
WARN: ? check_preempt_curr+0x29/0x80
WARN: ? nvme_irq_check+0x30/0x30 [nvme]
WARN: process_one_work+0x18e/0x3c0
WARN: worker_thread+0x30/0x3a0
WARN: ? process_one_work+0x3c0/0x3c0
WARN: kthread+0x113/0x130
WARN: ? kthread_park+0x90/0x90
WARN: ret_from_fork+0x3a/0x50
This patch sets evtchn_to_irq rows via a cmpxchg operation so that they
will be set only once. The row is now cleared before writing it to
evtchn_to_irq in order to not create a race once the row is visible for
other threads.
While at it, do not require the page to be zeroed, because it will be
overwritten with -1's in clear_evtchn_to_irq_row anyway.
Signed-off-by: Maximilian Heyne <[email protected]>
Fixes: d0b075ffeede ("xen/events: Refactor evtchn_to_irq array to be dynamically allocated")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/events/events_base.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index a2f8130e18fe..d138027034fd 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -133,12 +133,12 @@ static void disable_dynirq(struct irq_data *data);
static DEFINE_PER_CPU(unsigned int, irq_epoch);
-static void clear_evtchn_to_irq_row(unsigned row)
+static void clear_evtchn_to_irq_row(int *evtchn_row)
{
unsigned col;
for (col = 0; col < EVTCHN_PER_ROW; col++)
- WRITE_ONCE(evtchn_to_irq[row][col], -1);
+ WRITE_ONCE(evtchn_row[col], -1);
}
static void clear_evtchn_to_irq_all(void)
@@ -148,7 +148,7 @@ static void clear_evtchn_to_irq_all(void)
for (row = 0; row < EVTCHN_ROW(xen_evtchn_max_channels()); row++) {
if (evtchn_to_irq[row] == NULL)
continue;
- clear_evtchn_to_irq_row(row);
+ clear_evtchn_to_irq_row(evtchn_to_irq[row]);
}
}
@@ -156,6 +156,7 @@ static int set_evtchn_to_irq(unsigned evtchn, unsigned irq)
{
unsigned row;
unsigned col;
+ int *evtchn_row;
if (evtchn >= xen_evtchn_max_channels())
return -EINVAL;
@@ -168,11 +169,18 @@ static int set_evtchn_to_irq(unsigned evtchn, unsigned irq)
if (irq == -1)
return 0;
- evtchn_to_irq[row] = (int *)get_zeroed_page(GFP_KERNEL);
- if (evtchn_to_irq[row] == NULL)
+ evtchn_row = (int *) __get_free_pages(GFP_KERNEL, 0);
+ if (evtchn_row == NULL)
return -ENOMEM;
- clear_evtchn_to_irq_row(row);
+ clear_evtchn_to_irq_row(evtchn_row);
+
+ /*
+ * We've prepared an empty row for the mapping. If a different
+ * thread was faster inserting it, we can drop ours.
+ */
+ if (cmpxchg(&evtchn_to_irq[row], NULL, evtchn_row) != NULL)
+ free_page((unsigned long) evtchn_row);
}
WRITE_ONCE(evtchn_to_irq[row][col], irq);
--
2.30.2
From: "Longpeng(Mike)" <[email protected]>
[ Upstream commit 49b0b6ffe20c5344f4173f3436298782a08da4f2 ]
There's a potential deadlock case when remove the vsock device or
process the RESET event:
vsock_for_each_connected_socket:
spin_lock_bh(&vsock_table_lock) ----------- (1)
...
virtio_vsock_reset_sock:
lock_sock(sk) --------------------- (2)
...
spin_unlock_bh(&vsock_table_lock)
lock_sock() may do initiative schedule when the 'sk' is owned by
other thread at the same time, we would receivce a warning message
that "scheduling while atomic".
Even worse, if the next task (selected by the scheduler) try to
release a 'sk', it need to request vsock_table_lock and the deadlock
occur, cause the system into softlockup state.
Call trace:
queued_spin_lock_slowpath
vsock_remove_bound
vsock_remove_sock
virtio_transport_release
__vsock_release
vsock_release
__sock_release
sock_close
__fput
____fput
So we should not require sk_lock in this case, just like the behavior
in vhost_vsock or vmci.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: Stefan Hajnoczi <[email protected]>
Signed-off-by: Longpeng(Mike) <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index cc70d651d13e..e34979fcefd2 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -373,11 +373,14 @@ static void virtio_vsock_event_fill(struct virtio_vsock *vsock)
static void virtio_vsock_reset_sock(struct sock *sk)
{
- lock_sock(sk);
+ /* vmci_transport.c doesn't take sk_lock here either. At least we're
+ * under vsock_table_lock so the sock cannot disappear while we're
+ * executing.
+ */
+
sk->sk_state = TCP_CLOSE;
sk->sk_err = ECONNRESET;
sk->sk_error_report(sk);
- release_sock(sk);
}
static void virtio_vsock_update_guest_cid(struct virtio_vsock *vsock)
--
2.30.2
From: Colin Ian King <[email protected]>
commit 5afc1540f13804a31bb704b763308e17688369c5 upstream.
Currently the for-loop that scans for the optimial adc_period iterates
through all the possible adc_period levels because the exit logic in
the loop is inverted. I believe the comparison should be swapped and
the continue replaced with a break to exit the loop at the correct
point.
Addresses-Coverity: ("Continue has no effect")
Fixes: e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/palmas_gpadc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 7d61b566e148..f5218461ae25 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -660,8 +660,8 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
adc_period = adc->auto_conversion_period;
for (i = 0; i < 16; ++i) {
- if (((1000 * (1 << i)) / 32) < adc_period)
- continue;
+ if (((1000 * (1 << i)) / 32) >= adc_period)
+ break;
}
if (i > 0)
i--;
--
2.30.2
From: Johannes Berg <[email protected]>
commit a0761a301746ec2d92d7fcb82af69c0a6a4339aa upstream.
If we know that we have an encrypted link (based on having had
a key configured for TX in the past) then drop all data frames
in the key selection handler if there's no key anymore.
This fixes an issue with mac80211 internal TXQs - there we can
buffer frames for an encrypted link, but then if the key is no
longer there when they're dequeued, the frames are sent without
encryption. This happens if a station is disconnected while the
frames are still on the TXQ.
Detecting that a link should be encrypted based on a first key
having been configured for TX is fine as there are no use cases
for a connection going from with encryption to no encryption.
With extended key IDs, however, there is a case of having a key
configured for only decryption, so we can't just trigger this
behaviour on a key being configured.
Cc: [email protected]
Reported-by: Jouni Malinen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.6865c7f28a14.I9fb1d911b064262d33e33dfba730cdeef83926ca@changeid
Signed-off-by: Johannes Berg <[email protected]>
[pali: Backported to 4.19 and older versions]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/debugfs_sta.c | 1 +
net/mac80211/key.c | 1 +
net/mac80211/sta_info.h | 1 +
net/mac80211/tx.c | 12 +++++++++---
4 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index b15412c21ac9..d0fed5ceb2b7 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -80,6 +80,7 @@ static const char * const sta_flag_names[] = {
FLAG(MPSP_OWNER),
FLAG(MPSP_RECIPIENT),
FLAG(PS_DELIVER),
+ FLAG(USES_ENCRYPTION),
#undef FLAG
};
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index d122031e389a..87ed1210295f 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -335,6 +335,7 @@ static void ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
if (sta) {
if (pairwise) {
rcu_assign_pointer(sta->ptk[idx], new);
+ set_sta_flag(sta, WLAN_STA_USES_ENCRYPTION);
sta->ptk_idx = idx;
ieee80211_check_fast_xmit(sta);
} else {
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index f1d293f5678f..154c26d473a8 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -101,6 +101,7 @@ enum ieee80211_sta_info_flags {
WLAN_STA_MPSP_OWNER,
WLAN_STA_MPSP_RECIPIENT,
WLAN_STA_PS_DELIVER,
+ WLAN_STA_USES_ENCRYPTION,
NUM_WLAN_STA_FLAGS,
};
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0ab710576673..c7e8935224c0 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -589,10 +589,13 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
- if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT))
+ if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) {
tx->key = NULL;
- else if (tx->sta &&
- (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx])))
+ return TX_CONTINUE;
+ }
+
+ if (tx->sta &&
+ (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx])))
tx->key = key;
else if (ieee80211_is_group_privacy_action(tx->skb) &&
(key = rcu_dereference(tx->sdata->default_multicast_key)))
@@ -653,6 +656,9 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
if (!skip_hw && tx->key &&
tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
info->control.hw_key = &tx->key->conf;
+ } else if (!ieee80211_is_mgmt(hdr->frame_control) && tx->sta &&
+ test_sta_flag(tx->sta, WLAN_STA_USES_ENCRYPTION)) {
+ return TX_DROP;
}
return TX_CONTINUE;
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit f9dfb5e390fab2df9f7944bb91e7705aba14cd26 upstream.
The XSAVE init code initializes all enabled and supported components with
XRSTOR(S) to init state. Then it XSAVEs the state of the components back
into init_fpstate which is used in several places to fill in the init state
of components.
This works correctly with XSAVE, but not with XSAVEOPT and XSAVES because
those use the init optimization and skip writing state of components which
are in init state. So init_fpstate.xsave still contains all zeroes after
this operation.
There are two ways to solve that:
1) Use XSAVE unconditionally, but that requires to reshuffle the buffer when
XSAVES is enabled because XSAVES uses compacted format.
2) Save the components which are known to have a non-zero init state by other
means.
Looking deeper, #2 is the right thing to do because all components the
kernel supports have all-zeroes init state except the legacy features (FP,
SSE). Those cannot be hard coded because the states are not identical on all
CPUs, but they can be saved with FXSAVE which avoids all conditionals.
Use FXSAVE to save the legacy FP/SSE components in init_fpstate along with
a BUILD_BUG_ON() which reminds developers to validate that a newly added
component has all zeroes init state. As a bonus remove the now unused
copy_xregs_to_kernel_booting() crutch.
The XSAVE and reshuffle method can still be implemented in the unlikely
case that components are added which have a non-zero init state and no
other means to save them. For now, FXSAVE is just simple and good enough.
[ bp: Fix a typo or two in the text. ]
Fixes: 6bad06b76892 ("x86, xsave: Use xsaveopt in context-switch path when supported")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/fpu/internal.h | 30 ++++++-----------------
arch/x86/kernel/fpu/xstate.c | 38 ++++++++++++++++++++++++++---
2 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index b8c935033d21..4f274d851986 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -215,6 +215,14 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
}
}
+static inline void fxsave(struct fxregs_state *fx)
+{
+ if (IS_ENABLED(CONFIG_X86_32))
+ asm volatile( "fxsave %[fx]" : [fx] "=m" (*fx));
+ else
+ asm volatile("fxsaveq %[fx]" : [fx] "=m" (*fx));
+}
+
/* These macros all use (%edi)/(%rdi) as the single memory argument. */
#define XSAVE ".byte " REX_PREFIX "0x0f,0xae,0x27"
#define XSAVEOPT ".byte " REX_PREFIX "0x0f,0xae,0x37"
@@ -283,28 +291,6 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
: "D" (st), "m" (*st), "a" (lmask), "d" (hmask) \
: "memory")
-/*
- * This function is called only during boot time when x86 caps are not set
- * up and alternative can not be used yet.
- */
-static inline void copy_xregs_to_kernel_booting(struct xregs_state *xstate)
-{
- u64 mask = -1;
- u32 lmask = mask;
- u32 hmask = mask >> 32;
- int err;
-
- WARN_ON(system_state != SYSTEM_BOOTING);
-
- if (static_cpu_has(X86_FEATURE_XSAVES))
- XSTATE_OP(XSAVES, xstate, lmask, hmask, err);
- else
- XSTATE_OP(XSAVE, xstate, lmask, hmask, err);
-
- /* We should never fault when copying to a kernel buffer: */
- WARN_ON_FPU(err);
-}
-
/*
* This function is called only during boot time when x86 caps are not set
* up and alternative can not be used yet.
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 601a5da1d196..7d372db8bee1 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -404,6 +404,24 @@ static void __init print_xstate_offset_size(void)
}
}
+/*
+ * All supported features have either init state all zeros or are
+ * handled in setup_init_fpu() individually. This is an explicit
+ * feature list and does not use XFEATURE_MASK*SUPPORTED to catch
+ * newly added supported features at build time and make people
+ * actually look at the init state for the new feature.
+ */
+#define XFEATURES_INIT_FPSTATE_HANDLED \
+ (XFEATURE_MASK_FP | \
+ XFEATURE_MASK_SSE | \
+ XFEATURE_MASK_YMM | \
+ XFEATURE_MASK_OPMASK | \
+ XFEATURE_MASK_ZMM_Hi256 | \
+ XFEATURE_MASK_Hi16_ZMM | \
+ XFEATURE_MASK_PKRU | \
+ XFEATURE_MASK_BNDREGS | \
+ XFEATURE_MASK_BNDCSR)
+
/*
* setup the xstate image representing the init state
*/
@@ -411,6 +429,8 @@ static void __init setup_init_fpu_buf(void)
{
static int on_boot_cpu __initdata = 1;
+ BUILD_BUG_ON(XCNTXT_MASK != XFEATURES_INIT_FPSTATE_HANDLED);
+
WARN_ON_FPU(!on_boot_cpu);
on_boot_cpu = 0;
@@ -429,10 +449,22 @@ static void __init setup_init_fpu_buf(void)
copy_kernel_to_xregs_booting(&init_fpstate.xsave);
/*
- * Dump the init state again. This is to identify the init state
- * of any feature which is not represented by all zero's.
+ * All components are now in init state. Read the state back so
+ * that init_fpstate contains all non-zero init state. This only
+ * works with XSAVE, but not with XSAVEOPT and XSAVES because
+ * those use the init optimization which skips writing data for
+ * components in init state.
+ *
+ * XSAVE could be used, but that would require to reshuffle the
+ * data when XSAVES is available because XSAVES uses xstate
+ * compaction. But doing so is a pointless exercise because most
+ * components have an all zeros init state except for the legacy
+ * ones (FP and SSE). Those can be saved with FXSAVE into the
+ * legacy area. Adding new features requires to ensure that init
+ * state is all zeroes or if not to add the necessary handling
+ * here.
*/
- copy_xregs_to_kernel_booting(&init_fpstate.xsave);
+ fxsave(&init_fpstate.fxsave);
}
static int xfeature_uncompacted_offset(int xfeature_nr)
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream.
Multi-MSI uses a single MSI descriptor and there is a single mask register
when the device supports per vector masking. To avoid reading back the mask
register the value is cached in the MSI descriptor and updates are done by
clearing and setting bits in the cache and writing it to the device.
But nothing protects msi_desc::masked and the mask register from being
modified concurrently on two different CPUs for two different Linux
interrupts which belong to the same multi-MSI descriptor.
Add a lock to struct device and protect any operation on the mask and the
mask register with it.
This makes the update of msi_desc::masked unconditional, but there is no
place which requires a modification of the hardware register without
updating the masked cache.
msi_mask_irq() is now an empty wrapper which will be cleaned up in follow
up changes.
The problem goes way back to the initial support of multi-MSI, but picking
the commit which introduced the mask cache is a valid cut off point
(2.6.30).
Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/core.c | 1 +
drivers/pci/msi.c | 19 ++++++++++---------
include/linux/device.h | 1 +
include/linux/msi.h | 2 +-
4 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 92415a748ad2..e834087448a4 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1445,6 +1445,7 @@ void device_initialize(struct device *dev)
device_pm_init(dev);
set_dev_node(dev, -1);
#ifdef CONFIG_GENERIC_MSI_IRQ
+ raw_spin_lock_init(&dev->msi_lock);
INIT_LIST_HEAD(&dev->msi_list);
#endif
INIT_LIST_HEAD(&dev->links.consumers);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 034f60b75a6e..ecf15f0ea295 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -170,24 +170,25 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
*/
-u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+void __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
- u32 mask_bits = desc->masked;
+ raw_spinlock_t *lock = &desc->dev->msi_lock;
+ unsigned long flags;
if (pci_msi_ignore_mask || !desc->msi_attrib.maskbit)
- return 0;
+ return;
- mask_bits &= ~mask;
- mask_bits |= flag;
+ raw_spin_lock_irqsave(lock, flags);
+ desc->masked &= ~mask;
+ desc->masked |= flag;
pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos,
- mask_bits);
-
- return mask_bits;
+ desc->masked);
+ raw_spin_unlock_irqrestore(lock, flags);
}
static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
- desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
+ __pci_msi_desc_mask_irq(desc, mask, flag);
}
static void __iomem *pci_msix_desc_addr(struct msi_desc *desc)
diff --git a/include/linux/device.h b/include/linux/device.h
index 0b2e67014a83..fab5798a47fd 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -917,6 +917,7 @@ struct device {
struct dev_pin_info *pins;
#endif
#ifdef CONFIG_GENERIC_MSI_IRQ
+ raw_spinlock_t msi_lock;
struct list_head msi_list;
#endif
diff --git a/include/linux/msi.h b/include/linux/msi.h
index a89cdea8795a..3440ec051ebb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -144,7 +144,7 @@ void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag);
-u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
+void __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
void pci_msi_mask_irq(struct irq_data *data);
void pci_msi_unmask_irq(struct irq_data *data);
--
2.30.2
From: Jouni Malinen <[email protected]>
commit 56c5485c9e444c2e85e11694b6c44f1338fc20fd upstream.
It is possible for there to be pending frames in TXQs with a reference
to the key cache entry that is being deleted. If such a key cache entry
is cleared, those pending frame in TXQ might get transmitted without
proper encryption. It is safer to leave the previously used key into the
key cache in such cases. Instead, only clear the MAC address to prevent
RX processing from using this key cache entry.
This is needed in particularly in AP mode where the TXQs cannot be
flushed on station disconnection. This change alone may not be able to
address all cases where the key cache entry might get reused for other
purposes immediately (the key cache entry should be released for reuse
only once the TXQs do not have any remaining references to them), but
this makes it less likely to get unprotected frames and the more
complete changes may end up being significantly more complex.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/key.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 1816b4e7dc26..59618bb41f6c 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -583,7 +583,16 @@ EXPORT_SYMBOL(ath_key_config);
*/
void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key)
{
- ath_hw_keyreset(common, key->hw_key_idx);
+ /* Leave CCMP and TKIP (main key) configured to avoid disabling
+ * encryption for potentially pending frames already in a TXQ with the
+ * keyix pointing to this key entry. Instead, only clear the MAC address
+ * to prevent RX processing from using this key cache entry.
+ */
+ if (test_bit(key->hw_key_idx, common->ccmp_keymap) ||
+ test_bit(key->hw_key_idx, common->tkip_keymap))
+ ath_hw_keysetmac(common, key->hw_key_idx, NULL);
+ else
+ ath_hw_keyreset(common, key->hw_key_idx);
if (key->hw_key_idx < IEEE80211_WEP_NKID)
return;
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 30615bd21b4cc3c3bb5ae8bd70e2a915cc5f75c7 ]
The underlying register field has inverted sense (0 = enabled) so
the control definition must be marked as inverted.
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index bcfc32efef07..52f51b86af91 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -436,7 +436,7 @@ static SOC_ENUM_SINGLE_DECL(cs42l42_wnf05_freq_enum, CS42L42_ADC_WNF_HPF_CTL,
static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
/* ADC Volume and Filter Controls */
SOC_SINGLE("ADC Notch Switch", CS42L42_ADC_CTL,
- CS42L42_ADC_NOTCH_DIS_SHIFT, true, false),
+ CS42L42_ADC_NOTCH_DIS_SHIFT, true, true),
SOC_SINGLE("ADC Weak Force Switch", CS42L42_ADC_CTL,
CS42L42_ADC_FORCE_WEAK_VCM_SHIFT, true, false),
SOC_SINGLE("ADC Invert Switch", CS42L42_ADC_CTL,
--
2.30.2
From: Jouni Malinen <[email protected]>
commit ca2848022c12789685d3fab3227df02b863f9696 upstream.
Do not delete a key cache entry that is still being referenced by
pending frames in TXQs. This avoids reuse of the key cache entry while a
frame might still be transmitted using it.
To avoid having to do any additional operations during the main TX path
operations, track pending key cache entries in a new bitmap and check
whether any pending entries can be deleted before every new key
add/remove operation. Also clear any remaining entries when stopping the
interface.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 87 ++++++++++++++++++++++++++-
2 files changed, 87 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 4ac70827d142..ea008046c1f8 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -816,6 +816,7 @@ struct ath_hw {
struct ath9k_pacal_info pacal_info;
struct ar5416Stats stats;
struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES];
+ DECLARE_BITMAP(pending_del_keymap, ATH_KEYMAX);
enum ath9k_int imask;
u32 imrs2_reg;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6c635edc7596..173960682ea0 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -822,12 +822,80 @@ exit:
ieee80211_free_txskb(hw, skb);
}
+static bool ath9k_txq_list_has_key(struct list_head *txq_list, u32 keyix)
+{
+ struct ath_buf *bf;
+ struct ieee80211_tx_info *txinfo;
+ struct ath_frame_info *fi;
+
+ list_for_each_entry(bf, txq_list, list) {
+ if (bf->bf_state.stale || !bf->bf_mpdu)
+ continue;
+
+ txinfo = IEEE80211_SKB_CB(bf->bf_mpdu);
+ fi = (struct ath_frame_info *)&txinfo->rate_driver_data[0];
+ if (fi->keyix == keyix)
+ return true;
+ }
+
+ return false;
+}
+
+static bool ath9k_txq_has_key(struct ath_softc *sc, u32 keyix)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ int i;
+ struct ath_txq *txq;
+ bool key_in_use = false;
+
+ for (i = 0; !key_in_use && i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (!ATH_TXQ_SETUP(sc, i))
+ continue;
+ txq = &sc->tx.txq[i];
+ if (!txq->axq_depth)
+ continue;
+ if (!ath9k_hw_numtxpending(ah, txq->axq_qnum))
+ continue;
+
+ ath_txq_lock(sc, txq);
+ key_in_use = ath9k_txq_list_has_key(&txq->axq_q, keyix);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+ int idx = txq->txq_tailidx;
+
+ while (!key_in_use &&
+ !list_empty(&txq->txq_fifo[idx])) {
+ key_in_use = ath9k_txq_list_has_key(
+ &txq->txq_fifo[idx], keyix);
+ INCR(idx, ATH_TXFIFO_DEPTH);
+ }
+ }
+ ath_txq_unlock(sc, txq);
+ }
+
+ return key_in_use;
+}
+
+static void ath9k_pending_key_del(struct ath_softc *sc, u8 keyix)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (!test_bit(keyix, ah->pending_del_keymap) ||
+ ath9k_txq_has_key(sc, keyix))
+ return;
+
+ /* No more TXQ frames point to this key cache entry, so delete it. */
+ clear_bit(keyix, ah->pending_del_keymap);
+ ath_key_delete(common, keyix);
+}
+
static void ath9k_stop(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool prev_idle;
+ int i;
ath9k_deinit_channel_context(sc);
@@ -895,6 +963,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_pcu_lock);
+ for (i = 0; i < ATH_KEYMAX; i++)
+ ath9k_pending_key_del(sc, i);
+
/* Clear key cache entries explicitly to get rid of any potentially
* remaining keys.
*/
@@ -1711,6 +1782,12 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
if (sta)
an = (struct ath_node *)sta->drv_priv;
+ /* Delete pending key cache entries if no more frames are pointing to
+ * them in TXQs.
+ */
+ for (i = 0; i < ATH_KEYMAX; i++)
+ ath9k_pending_key_del(sc, i);
+
switch (cmd) {
case SET_KEY:
if (sta)
@@ -1740,7 +1817,15 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
}
break;
case DISABLE_KEY:
- ath_key_delete(common, key->hw_key_idx);
+ if (ath9k_txq_has_key(sc, key->hw_key_idx)) {
+ /* Delay key cache entry deletion until there are no
+ * remaining TXQ frames pointing to this entry.
+ */
+ set_bit(key->hw_key_idx, sc->sc_ah->pending_del_keymap);
+ ath_hw_keysetmac(common, key->hw_key_idx, NULL);
+ } else {
+ ath_key_delete(common, key->hw_key_idx);
+ }
if (an) {
for (i = 0; i < ARRAY_SIZE(an->key_idx); i++) {
if (an->key_idx[i] != key->hw_key_idx)
--
2.30.2
From: Yu Kuai <[email protected]>
[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by moving the error_pm label above the pm_runtime_put() in
the error path.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sh/usb-dmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
index 31a145154e9f..744fab9da918 100644
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -858,8 +858,8 @@ static int usb_dmac_probe(struct platform_device *pdev)
error:
of_dma_controller_free(pdev->dev.of_node);
- pm_runtime_put(&pdev->dev);
error_pm:
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit b9255a7cb51754e8d2645b65dd31805e282b4f3e upstream.
Nothing enforces the posted writes to be visible when the function
returns. Flush them even if the flush might be redundant when the entry is
masked already as the unmask will flush as well. This is either setup or a
rare affinity change event so the extra flush is not the end of the world.
While this is more a theoretical issue especially the logic in the X86
specific msi_set_affinity() function relies on the assumption that the
update has reached the hardware when the function returns.
Again, as this never has been enforced the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 82c061269677..147369773280 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -322,6 +322,9 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
if (unmasked)
__pci_msix_desc_mask_irq(entry, 0);
+
+ /* Ensure that the writes are visible in the device */
+ readl(base + PCI_MSIX_ENTRY_DATA);
} else {
int pos = dev->msi_cap;
u16 msgctl;
@@ -342,6 +345,8 @@ void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
pci_write_config_word(dev, pos + PCI_MSI_DATA_32,
msg->data);
}
+ /* Ensure that the writes are visible in the device */
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
}
entry->msg = *msg;
}
--
2.30.2
From: Maxim Levitsky <[email protected]>
[ upstream commit 0f923e07124df069ba68d8bb12324398f4b6b709 ]
* Invert the mask of bits that we pick from L2 in
nested_vmcb02_prepare_control
* Invert and explicitly use VIRQ related bits bitmask in svm_clear_vintr
This fixes a security issue that allowed a malicious L1 to run L2 with
AVIC enabled, which allowed the L2 to exploit the uninitialized and enabled
AVIC to read/write the host physical memory at some offsets.
Fixes: 3d6368ef580a ("KVM: SVM: Add VMRUN handler")
Signed-off-by: Maxim Levitsky <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/svm.h | 2 ++
arch/x86/kvm/svm.c | 15 ++++++++-------
2 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 78dd9df88157..2a9e81e93aac 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -117,6 +117,8 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
#define V_IGN_TPR_SHIFT 20
#define V_IGN_TPR_MASK (1 << V_IGN_TPR_SHIFT)
+#define V_IRQ_INJECTION_BITS_MASK (V_IRQ_MASK | V_INTR_PRIO_MASK | V_IGN_TPR_MASK)
+
#define V_INTR_MASKING_SHIFT 24
#define V_INTR_MASKING_MASK (1 << V_INTR_MASKING_SHIFT)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 0e6e158b8f8f..5ff6c145fdbb 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1211,12 +1211,7 @@ static __init int svm_hardware_setup(void)
}
}
- if (vgif) {
- if (!boot_cpu_has(X86_FEATURE_VGIF))
- vgif = false;
- else
- pr_info("Virtual GIF supported\n");
- }
+ vgif = false; /* Disabled for CVE-2021-3653 */
return 0;
@@ -3164,7 +3159,13 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
svm->nested.intercept = nested_vmcb->control.intercept;
svm_flush_tlb(&svm->vcpu, true);
- svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK;
+
+ svm->vmcb->control.int_ctl &=
+ V_INTR_MASKING_MASK | V_GIF_ENABLE_MASK | V_GIF_MASK;
+
+ svm->vmcb->control.int_ctl |= nested_vmcb->control.int_ctl &
+ (V_TPR_MASK | V_IRQ_INJECTION_BITS_MASK);
+
if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
svm->vcpu.arch.hflags |= HF_VINTR_MASK;
else
--
2.30.2
From: Dave Gerlach <[email protected]>
[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]
Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.
When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.
Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.
Signed-off-by: Dave Gerlach <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index c4279b0b9f12..437e8d2dcc70 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -411,7 +411,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
--
2.30.2
From: Nathan Chancellor <[email protected]>
commit 848378812e40152abe9b9baf58ce2004f76fb988 upstream.
A recent change in LLVM causes module_{c,d}tor sections to appear when
CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings
because these are not handled anywhere:
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor'
Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN
flag, so it is in a separate section even with -fno-function-sections
(default)".
Place them in the TEXT_TEXT section so that these technologies continue
to work with the newer compiler versions. All of the KASAN and KCSAN
KUnit tests continue to pass after this change.
Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/1432
Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Fangrui Song <[email protected]>
Acked-by: Marco Elver <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[nc: Fix conflicts due to lack of cf68fffb66d60 and 266ff2a8f51f0]
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/vmlinux.lds.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c9790b2cdf34..45fe7295051f 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -465,6 +465,7 @@
*(.text.unknown .text.unknown.*) \
*(.text..refcount) \
*(.ref.text) \
+ *(.text.asan.* .text.tsan.*) \
MEM_KEEP(init.text) \
MEM_KEEP(exit.text) \
--
2.30.2
From: Peter Ujfalusi <[email protected]>
[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ]
If the router_xlate can not find the controller in the available DMA
devices then it should return with -EPORBE_DEFER in a same way as the
of_dma_request_slave_channel() does.
The issue can be reproduced if the event router is registered before the
DMA controller itself and a driver would request for a channel before the
controller is registered.
In of_dma_request_slave_channel():
1. of_dma_find_controller() would find the dma_router
2. ofdma->of_dma_xlate() would fail and returned NULL
3. -ENODEV is returned as error code
with this patch we would return in this case the correct -EPROBE_DEFER and
the client can try to request the channel later.
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/of-dma.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c
index 8344a60c2131..a9d3ab94749b 100644
--- a/drivers/dma/of-dma.c
+++ b/drivers/dma/of-dma.c
@@ -68,8 +68,12 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
return NULL;
ofdma_target = of_dma_find_controller(&dma_spec_target);
- if (!ofdma_target)
- return NULL;
+ if (!ofdma_target) {
+ ofdma->dma_router->route_free(ofdma->dma_router->dev,
+ route_data);
+ chan = ERR_PTR(-EPROBE_DEFER);
+ goto err;
+ }
chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target);
if (IS_ERR_OR_NULL(chan)) {
@@ -80,6 +84,7 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
chan->route_data = route_data;
}
+err:
/*
* Need to put the node back since the ofdma->of_dma_route_allocate
* has taken it for generating the new, translated dma_spec
--
2.30.2
From: Ye Bin <[email protected]>
[ Upstream commit bc546c0c9abb3bb2fb46866b3d1e6ade9695a5f6 ]
The following BUG_ON() was observed during RDAC scan:
[595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427!
[595952.951143] Internal error: Oops - BUG: 0 [#1] SMP
......
[595953.251065] Call trace:
[595953.259054] check_ownership+0xb0/0x118
[595953.269794] rdac_bus_attach+0x1f0/0x4b0
[595953.273787] scsi_dh_handler_attach+0x3c/0xe8
[595953.278211] scsi_dh_add_device+0xc4/0xe8
[595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8
[595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00
[595953.291142] __scsi_scan_target+0x598/0x630
[595953.295395] scsi_scan_target+0x120/0x130
[595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc]
[595953.304944] store_scan+0xb0/0x108
[595953.308420] dev_attr_store+0x44/0x60
[595953.312160] sysfs_kf_write+0x58/0x80
[595953.315893] kernfs_fop_write+0xe8/0x1f0
[595953.319888] __vfs_write+0x60/0x190
[595953.323448] vfs_write+0xac/0x1c0
[595953.326836] ksys_write+0x74/0xf0
[595953.330221] __arm64_sys_write+0x24/0x30
Code is in check_ownership:
list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) {
/* h->sdev should always be valid */
BUG_ON(!tmp->sdev);
tmp->sdev->access_state = access_state;
}
rdac_bus_attach
initialize_controller
list_add_rcu(&h->node, &h->ctlr->dh_list);
h->sdev = sdev;
rdac_bus_detach
list_del_rcu(&h->node);
h->sdev = NULL;
Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev
is NULL when processing the RDAC attach.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Ye Bin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index b92e06f75756..897449deab62 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -453,8 +453,8 @@ static int initialize_controller(struct scsi_device *sdev,
if (!h->ctlr)
err = SCSI_DH_RES_TEMP_UNAVAIL;
else {
- list_add_rcu(&h->node, &h->ctlr->dh_list);
h->sdev = sdev;
+ list_add_rcu(&h->node, &h->ctlr->dh_list);
}
spin_unlock(&list_lock);
err = SCSI_DH_OK;
@@ -779,11 +779,11 @@ static void rdac_bus_detach( struct scsi_device *sdev )
spin_lock(&list_lock);
if (h->ctlr) {
list_del_rcu(&h->node);
- h->sdev = NULL;
kref_put(&h->ctlr->kref, release_controller);
}
spin_unlock(&list_lock);
sdev->handler_data = NULL;
+ synchronize_rcu();
kfree(h);
}
--
2.30.2
From: Sreekanth Reddy <[email protected]>
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]
Avoid printing a 'target allocation failed' error if the driver
target_alloc() callback function returns -ENXIO. This return value
indicates that the corresponding H:C:T:L entry is empty.
Removing this error reduces the scan time if the user issues SCAN_WILD_CARD
scan operation through sysfs parameter on a host with a lot of empty
H:C:T:L entries.
Avoiding the printk on -ENXIO matches the behavior of the other callback
functions during scanning.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_scan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 40acc060b655..95ca7039f493 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -462,7 +462,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
error = shost->hostt->target_alloc(starget);
if(error) {
- dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error);
+ if (error != -ENXIO)
+ dev_err(dev, "target allocation failed, error %d\n", error);
/* don't want scsi_target_reap to do the final
* put because it will be under the host lock */
scsi_target_destroy(starget);
--
2.30.2
From: Jouni Malinen <[email protected]>
commit 73488cb2fa3bb1ef9f6cf0d757f76958bd4deaca upstream.
Now that ath/key.c may not be explicitly clearing keys from the key
cache, clear all key cache entries when disabling hardware to make sure
no keys are left behind beyond this point.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a678dd8035f3..63081b445f45 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -895,6 +895,11 @@ static void ath9k_stop(struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_pcu_lock);
+ /* Clear key cache entries explicitly to get rid of any potentially
+ * remaining keys.
+ */
+ ath9k_cmn_init_crypto(sc->sc_ah);
+
ath9k_ps_restore(sc);
sc->ps_idle = prev_idle;
--
2.30.2
From: "Ivan T. Ivanov" <[email protected]>
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ]
Currently phy_device state could be left in inconsistent state shown
by following alert message[1]. This is because phy_read_status could
be called concurrently from lan78xx_delayedwork, phy_state_machine and
__ethtool_get_link. Fix this by making sure that phy_device state is
updated atomically.
[1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1)
Signed-off-by: Ivan T. Ivanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/lan78xx.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 120e99914fd6..ff108611c5e4 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1147,7 +1147,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
{
struct phy_device *phydev = dev->net->phydev;
struct ethtool_link_ksettings ecmd;
- int ladv, radv, ret;
+ int ladv, radv, ret, link;
u32 buf;
/* clear LAN78xx interrupt status */
@@ -1155,9 +1155,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (unlikely(ret < 0))
return -EIO;
+ mutex_lock(&phydev->lock);
phy_read_status(phydev);
+ link = phydev->link;
+ mutex_unlock(&phydev->lock);
- if (!phydev->link && dev->link_on) {
+ if (!link && dev->link_on) {
dev->link_on = false;
/* reset MAC */
@@ -1170,7 +1173,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
return -EIO;
del_timer(&dev->stat_monitor);
- } else if (phydev->link && !dev->link_on) {
+ } else if (link && !dev->link_on) {
dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd);
@@ -1457,9 +1460,14 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
static u32 lan78xx_get_link(struct net_device *net)
{
+ u32 link;
+
+ mutex_lock(&net->phydev->lock);
phy_read_status(net->phydev);
+ link = net->phydev->link;
+ mutex_unlock(&net->phydev->lock);
- return net->phydev->link;
+ return link;
}
static void lan78xx_get_drvinfo(struct net_device *net,
--
2.30.2
From: Ole Bjørn Midtbø <[email protected]>
[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]
A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.
list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
but was dead000000000200. (next=ffffffc03ac77de0).
------------[ cut here ]------------
CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9
...
---[ end trace 0adc2158f0646eac ]---
Call trace:
[<ffffffc000443f78>] __list_add+0x38/0xb0
[<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
[<ffffffc00020eecc>] __pollwait+0xec/0x100
[<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
[<ffffffc000bdb8a8>] sock_poll+0x110/0x128
[<ffffffc000210378>] do_sys_poll+0x220/0x480
[<ffffffc0002106f0>] SyS_poll+0x80/0x138
[<ffffffc00008510c>] __sys_trace_return+0x0/0x4
Unable to handle kernel paging request at virtual address dead000000000100
...
CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9
...
Call trace:
[<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
[<ffffffc0000f0818>] __wake_up+0x50/0x70
[<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
[<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
[<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
[<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
[<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
[<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
[<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
[<ffffffc0000c2218>] process_one_work+0x268/0x460
[<ffffffc0000c2678>] worker_thread+0x268/0x480
[<ffffffc0000c94e0>] kthread+0x118/0x128
[<ffffffc000085070>] ret_from_fork+0x10/0x20
---[ end trace 0adc2158f0646ead ]---
Signed-off-by: Ole Bjørn Midtbø <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hidp/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index b21fcc838784..acebcf605bb5 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -1283,7 +1283,7 @@ static int hidp_session_thread(void *arg)
/* cleanup runtime environment */
remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait);
- remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait);
+ remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait);
wake_up_interruptible(&session->report_queue);
hidp_del_timer(session);
--
2.30.2
From: Thomas Gleixner <[email protected]>
commit 689e6b5351573c38ccf92a0dd8b3e2c2241e4aff upstream.
The comments about preserving the cached state in pci_msi[x]_shutdown() are
misleading as the MSI descriptors are freed right after those functions
return. So there is nothing to restore. Preparatory change.
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index c69cd0dff301..93dd4c69cc46 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -896,7 +896,6 @@ static void pci_msi_shutdown(struct pci_dev *dev)
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
- /* Keep cached state to be restored */
__pci_msi_desc_mask_irq(desc, mask, 0);
/* Restore dev->irq to its default pin-assertion irq */
@@ -982,10 +981,8 @@ static void pci_msix_shutdown(struct pci_dev *dev)
}
/* Return the device with MSI-X masked as initial states */
- for_each_pci_msi_entry(entry, dev) {
- /* Keep cached states to be restored */
+ for_each_pci_msi_entry(entry, dev)
__pci_msix_desc_mask_irq(entry, 1);
- }
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
pci_intx_for_msi(dev, 1);
--
2.30.2
From: Jouni Malinen <[email protected]>
commit 144cd24dbc36650a51f7fe3bf1424a1432f1f480 upstream.
tkip_keymap can be used internally to avoid the reference to key->cipher
and with this, only the key index value itself is needed. This allows
ath_key_delete() call to be postponed to be handled after the upper
layer STA and key entry have already been removed. This is needed to
make ath9k key cache management safer.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath.h | 2 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 +-
drivers/net/wireless/ath/ath9k/main.c | 5 ++-
drivers/net/wireless/ath/key.c | 34 +++++++++----------
5 files changed, 22 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 3dffa0c3cae5..28068544e2fe 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -199,7 +199,7 @@ struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
bool ath_is_mybeacon(struct ath_common *common, struct ieee80211_hdr *hdr);
void ath_hw_setbssidmask(struct ath_common *common);
-void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key);
+void ath_key_delete(struct ath_common *common, u8 hw_key_idx);
int ath_key_config(struct ath_common *common,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 16e052d02c94..0f4836fc3b7c 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -522,7 +522,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
}
break;
case DISABLE_KEY:
- ath_key_delete(common, key);
+ ath_key_delete(common, key->hw_key_idx);
break;
default:
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index a553c91d41a1..7d670a71b7b8 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1460,7 +1460,7 @@ static int ath9k_htc_set_key(struct ieee80211_hw *hw,
}
break;
case DISABLE_KEY:
- ath_key_delete(common, key);
+ ath_key_delete(common, key->hw_key_idx);
break;
default:
ret = -EINVAL;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 63081b445f45..6c635edc7596 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1545,12 +1545,11 @@ static void ath9k_del_ps_key(struct ath_softc *sc,
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_node *an = (struct ath_node *) sta->drv_priv;
- struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key };
if (!an->ps_key)
return;
- ath_key_delete(common, &ps_key);
+ ath_key_delete(common, an->ps_key);
an->ps_key = 0;
an->key_idx[0] = 0;
}
@@ -1741,7 +1740,7 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
}
break;
case DISABLE_KEY:
- ath_key_delete(common, key);
+ ath_key_delete(common, key->hw_key_idx);
if (an) {
for (i = 0; i < ARRAY_SIZE(an->key_idx); i++) {
if (an->key_idx[i] != key->hw_key_idx)
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index cb266cf3c77c..61b59a804e30 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -581,38 +581,38 @@ EXPORT_SYMBOL(ath_key_config);
/*
* Delete Key.
*/
-void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key)
+void ath_key_delete(struct ath_common *common, u8 hw_key_idx)
{
/* Leave CCMP and TKIP (main key) configured to avoid disabling
* encryption for potentially pending frames already in a TXQ with the
* keyix pointing to this key entry. Instead, only clear the MAC address
* to prevent RX processing from using this key cache entry.
*/
- if (test_bit(key->hw_key_idx, common->ccmp_keymap) ||
- test_bit(key->hw_key_idx, common->tkip_keymap))
- ath_hw_keysetmac(common, key->hw_key_idx, NULL);
+ if (test_bit(hw_key_idx, common->ccmp_keymap) ||
+ test_bit(hw_key_idx, common->tkip_keymap))
+ ath_hw_keysetmac(common, hw_key_idx, NULL);
else
- ath_hw_keyreset(common, key->hw_key_idx);
- if (key->hw_key_idx < IEEE80211_WEP_NKID)
+ ath_hw_keyreset(common, hw_key_idx);
+ if (hw_key_idx < IEEE80211_WEP_NKID)
return;
- clear_bit(key->hw_key_idx, common->keymap);
- clear_bit(key->hw_key_idx, common->ccmp_keymap);
- if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
+ clear_bit(hw_key_idx, common->keymap);
+ clear_bit(hw_key_idx, common->ccmp_keymap);
+ if (!test_bit(hw_key_idx, common->tkip_keymap))
return;
- clear_bit(key->hw_key_idx + 64, common->keymap);
+ clear_bit(hw_key_idx + 64, common->keymap);
- clear_bit(key->hw_key_idx, common->tkip_keymap);
- clear_bit(key->hw_key_idx + 64, common->tkip_keymap);
+ clear_bit(hw_key_idx, common->tkip_keymap);
+ clear_bit(hw_key_idx + 64, common->tkip_keymap);
if (!(common->crypt_caps & ATH_CRYPT_CAP_MIC_COMBINED)) {
- ath_hw_keyreset(common, key->hw_key_idx + 32);
- clear_bit(key->hw_key_idx + 32, common->keymap);
- clear_bit(key->hw_key_idx + 64 + 32, common->keymap);
+ ath_hw_keyreset(common, hw_key_idx + 32);
+ clear_bit(hw_key_idx + 32, common->keymap);
+ clear_bit(hw_key_idx + 64 + 32, common->keymap);
- clear_bit(key->hw_key_idx + 32, common->tkip_keymap);
- clear_bit(key->hw_key_idx + 64 + 32, common->tkip_keymap);
+ clear_bit(hw_key_idx + 32, common->tkip_keymap);
+ clear_bit(hw_key_idx + 64 + 32, common->tkip_keymap);
}
}
EXPORT_SYMBOL(ath_key_delete);
--
2.30.2
From: Jouni Malinen <[email protected]>
commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream.
ath9k is going to use this for safer management of key cache entries.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath.h | 1 +
drivers/net/wireless/ath/key.c | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index f3f2784f6ebd..3dffa0c3cae5 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -205,6 +205,7 @@ int ath_key_config(struct ath_common *common,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key);
bool ath_hw_keyreset(struct ath_common *common, u16 entry);
+bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac);
void ath_hw_cycle_counters_update(struct ath_common *common);
int32_t ath_hw_get_listen_time(struct ath_common *common);
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 59618bb41f6c..cb266cf3c77c 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -84,8 +84,7 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry)
}
EXPORT_SYMBOL(ath_hw_keyreset);
-static bool ath_hw_keysetmac(struct ath_common *common,
- u16 entry, const u8 *mac)
+bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac)
{
u32 macHi, macLo;
u32 unicast_flag = AR_KEYTABLE_VALID;
@@ -125,6 +124,7 @@ static bool ath_hw_keysetmac(struct ath_common *common,
return true;
}
+EXPORT_SYMBOL(ath_hw_keysetmac);
static bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
const struct ath_keyval *k,
--
2.30.2
From: Harshvardhan Jha <[email protected]>
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]
The list_for_each_entry() iterator, "adapter" in this code, can never be
NULL. If we exit the loop without finding the correct adapter then
"adapter" points invalid memory that is an offset from the list head. This
will eventually lead to memory corruption and presumably a kernel crash.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Sumit Saxena <[email protected]>
Signed-off-by: Harshvardhan Jha <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_mm.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 65b6f6ace3a5..8ec308c5970f 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -250,7 +250,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
mimd_t mimd;
uint32_t adapno;
int iterator;
-
+ bool is_found;
if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) {
*rval = -EFAULT;
@@ -266,12 +266,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
adapter = NULL;
iterator = 0;
+ is_found = false;
list_for_each_entry(adapter, &adapters_list_g, list) {
- if (iterator++ == adapno) break;
+ if (iterator++ == adapno) {
+ is_found = true;
+ break;
+ }
}
- if (!adapter) {
+ if (!is_found) {
*rval = -ENODEV;
return NULL;
}
@@ -739,6 +743,7 @@ ioctl_done(uioc_t *kioc)
uint32_t adapno;
int iterator;
mraid_mmadp_t* adapter;
+ bool is_found;
/*
* When the kioc returns from driver, make sure it still doesn't
@@ -761,19 +766,23 @@ ioctl_done(uioc_t *kioc)
iterator = 0;
adapter = NULL;
adapno = kioc->adapno;
+ is_found = false;
con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed "
"ioctl that was timedout before\n"));
list_for_each_entry(adapter, &adapters_list_g, list) {
- if (iterator++ == adapno) break;
+ if (iterator++ == adapno) {
+ is_found = true;
+ break;
+ }
}
kioc->timedout = 0;
- if (adapter) {
+ if (is_found)
mraid_mm_dealloc_kioc( adapter, kioc );
- }
+
}
else {
wake_up(&wait_q);
--
2.30.2
From: Sudeep Holla <[email protected]>
[ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ]
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@..
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Cc: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 733678b75b88..ad3cdf2ca7fb 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -756,14 +756,14 @@
status = "disabled";
};
- vica: intc@10140000 {
+ vica: interrupt-controller@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
- vicb: intc@10140020 {
+ vicb: interrupt-controller@10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
--
2.30.2
Signed-off-by: Sasha Levin <[email protected]>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index ef77eb6d5d29..10ff170e0743 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 14
-SUBLEVEL = 244
-EXTRAVERSION =
+SUBLEVEL = 245
+EXTRAVERSION = -rc1
NAME = Petit Gorille
# *DOCUMENTATION*
--
2.30.2
From: Saravana Kannan <[email protected]>
[ Upstream commit 99d81e942474cc7677d12f673f42a7ea699e2589 ]
If we are seeing memory allocation errors, don't try to continue
registering child mdiobus devices. It's unlikely they'll succeed.
Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose")
Signed-off-by: Saravana Kannan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio-mux.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index 0a86f1e4c02f..bb7e3f12a003 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -85,6 +85,17 @@ out:
static int parent_count;
+static void mdio_mux_uninit_children(struct mdio_mux_parent_bus *pb)
+{
+ struct mdio_mux_child_bus *cb = pb->children;
+
+ while (cb) {
+ mdiobus_unregister(cb->mii_bus);
+ mdiobus_free(cb->mii_bus);
+ cb = cb->next;
+ }
+}
+
int mdio_mux_init(struct device *dev,
struct device_node *mux_node,
int (*switch_fn)(int cur, int desired, void *data),
@@ -147,7 +158,7 @@ int mdio_mux_init(struct device *dev,
cb = devm_kzalloc(dev, sizeof(*cb), GFP_KERNEL);
if (!cb) {
ret_val = -ENOMEM;
- continue;
+ goto err_loop;
}
cb->bus_number = v;
cb->parent = pb;
@@ -155,8 +166,7 @@ int mdio_mux_init(struct device *dev,
cb->mii_bus = mdiobus_alloc();
if (!cb->mii_bus) {
ret_val = -ENOMEM;
- devm_kfree(dev, cb);
- continue;
+ goto err_loop;
}
cb->mii_bus->priv = cb;
@@ -185,6 +195,10 @@ int mdio_mux_init(struct device *dev,
dev_err(dev, "Error: No acceptable child buses found\n");
devm_kfree(dev, pb);
+
+err_loop:
+ mdio_mux_uninit_children(pb);
+ of_node_put(child_bus_node);
err_pb_kz:
put_device(&parent_bus->dev);
err_parent_bus:
@@ -196,14 +210,8 @@ EXPORT_SYMBOL_GPL(mdio_mux_init);
void mdio_mux_uninit(void *mux_handle)
{
struct mdio_mux_parent_bus *pb = mux_handle;
- struct mdio_mux_child_bus *cb = pb->children;
-
- while (cb) {
- mdiobus_unregister(cb->mii_bus);
- mdiobus_free(cb->mii_bus);
- cb = cb->next;
- }
+ mdio_mux_uninit_children(pb);
put_device(&pb->mii_bus->dev);
}
EXPORT_SYMBOL_GPL(mdio_mux_uninit);
--
2.30.2
From: Dinghao Liu <[email protected]>
[ Upstream commit 0a298d133893c72c96e2156ed7cb0f0c4a306a3e ]
qlcnic_83xx_unlock_flash() is called on all paths after we call
qlcnic_83xx_lock_flash(), except for one error path on failure
of QLCRD32(), which may cause a deadlock. This bug is suggested
by a static analysis tool, please advise.
Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery")
Signed-off-by: Dinghao Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index aae81226a0a4..4994599728dc 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -3157,8 +3157,10 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr,
indirect_addr = QLC_83XX_FLASH_DIRECT_DATA(addr);
ret = QLCRD32(adapter, indirect_addr, &err);
- if (err == -EIO)
+ if (err == -EIO) {
+ qlcnic_83xx_unlock_flash(adapter);
return err;
+ }
word = ret;
*(u32 *)p_data = word;
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 55c8fca1dae1fb0d11deaa21b65a647dedb1bc50 ]
During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH
incidentally dropped the implicit dependency on the PCI. Restore it.
Fixes: 18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index a21ad10d613c..a8b4ca17208d 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -91,7 +91,8 @@ config DP83640_PHY
config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"
depends on X86_32 || COMPILE_TEST
- depends on HAS_IOMEM && NET
+ depends on HAS_IOMEM && PCI
+ depends on NET
imply PTP_1588_CLOCK
help
This driver adds support for using the PCH EG20T as a PTP
--
2.30.2
From: Sergey Marinkevich <[email protected]>
[ Upstream commit 2e34328b396a69b73661ba38d47d92b7cf21c2c4 ]
I got a problem on MIPS with Big-Endian is turned on: every time when
NF trying to change TCP MSS it returns because of new.v16 was greater
than old.v16. But real MSS was 1460 and my rule was like this:
add rule table chain tcp option maxseg size set 1400
And 1400 is lesser that 1460, not greater.
Later I founded that main causer is cast from u32 to __be16.
Debugging:
In example MSS = 1400(HEX: 0x578). Here is representation of each byte
like it is in memory by addresses from left to right(e.g. [0x0 0x1 0x2
0x3]). LE — Little-Endian system, BE — Big-Endian, left column is type.
LE BE
u32: [78 05 00 00] [00 00 05 78]
As you can see, u32 representation will be casted to u16 from different
half of 4-byte address range. But actually nf_tables uses registers and
store data of various size. Actually TCP MSS stored in 2 bytes. But
registers are still u32 in definition:
struct nft_regs {
union {
u32 data[20];
struct nft_verdict verdict;
};
};
So, access like regs->data[priv->sreg] exactly u32. So, according to
table presents above, per-byte representation of stored TCP MSS in
register will be:
LE BE
(u32)regs->data[]: [78 05 00 00] [05 78 00 00]
^^ ^^
We see that register uses just half of u32 and other 2 bytes may be
used for some another data. But in nft_exthdr_tcp_set_eval() it casted
just like u32 -> __be16:
new.v16 = src
But u32 overfill __be16, so it get 2 low bytes. For clarity draw
one more table(<xx xx> means that bytes will be used for cast).
LE BE
u32: [<78 05> 00 00] [00 00 <05 78>]
(u32)regs->data[]: [<78 05> 00 00] [05 78 <00 00>]
As you can see, for Little-Endian nothing changes, but for Big-endian we
take the wrong half. In my case there is some other data instead of
zeros, so new MSS was wrongly greater.
For shooting this bug I used solution for ports ranges. Applying of this
patch does not affect Little-Endian systems.
Signed-off-by: Sergey Marinkevich <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_exthdr.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index a301d3bbd3fa..e73a1503e8d7 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -138,7 +138,6 @@ static void nft_exthdr_tcp_set_eval(const struct nft_expr *expr,
unsigned int i, optl, tcphdr_len, offset;
struct tcphdr *tcph;
u8 *opt;
- u32 src;
tcph = nft_tcp_header_pointer(pkt, sizeof(buff), buff, &tcphdr_len);
if (!tcph)
@@ -147,7 +146,6 @@ static void nft_exthdr_tcp_set_eval(const struct nft_expr *expr,
opt = (u8 *)tcph;
for (i = sizeof(*tcph); i < tcphdr_len - 1; i += optl) {
union {
- u8 octet;
__be16 v16;
__be32 v32;
} old, new;
@@ -168,13 +166,13 @@ static void nft_exthdr_tcp_set_eval(const struct nft_expr *expr,
if (!tcph)
return;
- src = regs->data[priv->sreg];
offset = i + priv->offset;
switch (priv->len) {
case 2:
old.v16 = get_unaligned((u16 *)(opt + offset));
- new.v16 = src;
+ new.v16 = (__force __be16)nft_reg_load16(
+ ®s->data[priv->sreg]);
switch (priv->type) {
case TCPOPT_MSS:
@@ -192,7 +190,7 @@ static void nft_exthdr_tcp_set_eval(const struct nft_expr *expr,
old.v16, new.v16, false);
break;
case 4:
- new.v32 = src;
+ new.v32 = regs->data[priv->sreg];
old.v32 = get_unaligned((u32 *)(opt + offset));
if (old.v32 == new.v32)
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ]
We can't take the tx lock from the napi poll routine, because
netpoll can poll napi at any moment, including with the tx lock
already held.
The tx lock is protecting against two paths - the disable
path, and (as Michael points out) the NETDEV_TX_BUSY case
which may occur if NAPI completions race with start_xmit
and both decide to re-enable the queue.
For the disable/ifdown path use synchronize_net() to make sure
closing the device does not race we restarting the queues.
Annotate accesses to dev_state against data races.
For the NAPI cleanup vs start_xmit path - appropriate barriers
are already in place in the main spot where Tx queue is stopped
but we need to do the same careful dance in the TX_BUSY case.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 54 ++++++++++++++---------
1 file changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 9135c3eccb58..c4b0c35a270c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -266,6 +266,26 @@ static u16 bnxt_xmit_get_cfa_action(struct sk_buff *skb)
return md_dst->u.port_info.port_id;
}
+static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
+ struct bnxt_tx_ring_info *txr,
+ struct netdev_queue *txq)
+{
+ netif_tx_stop_queue(txq);
+
+ /* netif_tx_stop_queue() must be done before checking
+ * tx index in bnxt_tx_avail() below, because in
+ * bnxt_tx_int(), we update tx index before checking for
+ * netif_tx_queue_stopped().
+ */
+ smp_mb();
+ if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) {
+ netif_tx_wake_queue(txq);
+ return false;
+ }
+
+ return true;
+}
+
static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bnxt *bp = netdev_priv(dev);
@@ -293,8 +313,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
free_size = bnxt_tx_avail(bp, txr);
if (unlikely(free_size < skb_shinfo(skb)->nr_frags + 2)) {
- netif_tx_stop_queue(txq);
- return NETDEV_TX_BUSY;
+ if (bnxt_txr_netif_try_stop_queue(bp, txr, txq))
+ return NETDEV_TX_BUSY;
}
length = skb->len;
@@ -505,16 +525,7 @@ tx_done:
if (skb->xmit_more && !tx_buf->is_push)
bnxt_db_write(bp, txr->tx_doorbell, DB_KEY_TX | prod);
- netif_tx_stop_queue(txq);
-
- /* netif_tx_stop_queue() must be done before checking
- * tx index in bnxt_tx_avail() below, because in
- * bnxt_tx_int(), we update tx index before checking for
- * netif_tx_queue_stopped().
- */
- smp_mb();
- if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh)
- netif_tx_wake_queue(txq);
+ bnxt_txr_netif_try_stop_queue(bp, txr, txq);
}
return NETDEV_TX_OK;
@@ -598,14 +609,9 @@ next_tx_int:
smp_mb();
if (unlikely(netif_tx_queue_stopped(txq)) &&
- (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh)) {
- __netif_tx_lock(txq, smp_processor_id());
- if (netif_tx_queue_stopped(txq) &&
- bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
- txr->dev_state != BNXT_DEV_STATE_CLOSING)
- netif_tx_wake_queue(txq);
- __netif_tx_unlock(txq);
- }
+ bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
+ READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING)
+ netif_tx_wake_queue(txq);
}
static struct page *__bnxt_alloc_rx_page(struct bnxt *bp, dma_addr_t *mapping,
@@ -5748,9 +5754,11 @@ void bnxt_tx_disable(struct bnxt *bp)
if (bp->tx_ring) {
for (i = 0; i < bp->tx_nr_rings; i++) {
txr = &bp->tx_ring[i];
- txr->dev_state = BNXT_DEV_STATE_CLOSING;
+ WRITE_ONCE(txr->dev_state, BNXT_DEV_STATE_CLOSING);
}
}
+ /* Make sure napi polls see @dev_state change */
+ synchronize_net();
/* Drop carrier first to prevent TX timeout */
netif_carrier_off(bp->dev);
/* Stop all TX queues */
@@ -5764,8 +5772,10 @@ void bnxt_tx_enable(struct bnxt *bp)
for (i = 0; i < bp->tx_nr_rings; i++) {
txr = &bp->tx_ring[i];
- txr->dev_state = 0;
+ WRITE_ONCE(txr->dev_state, 0);
}
+ /* Make sure napi polls see @dev_state change */
+ synchronize_net();
netif_tx_wake_all_queues(bp->dev);
if (bp->link_info.link_up)
netif_carrier_on(bp->dev);
--
2.30.2
From: Saravana Kannan <[email protected]>
[ Upstream commit 7bd0cef5dac685f09ef8b0b2a7748ff42d284dc7 ]
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
ignore it and continue registering the rest of the mdiobus children. This
would permanently prevent the deferring child mdiobus from working instead
of reattempting it in the future. So, if a child mdiobus needs to be
reattempted in the future, defer the entire mdio-mux initialization.
This fixes the issue where PHYs sitting under the mdio-mux aren't
initialized correctly if the PHY's interrupt controller is not yet ready
when the mdio-mux is being probed. Additional context in the link below.
Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.")
Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t
Signed-off-by: Saravana Kannan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio-mux.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c
index bb7e3f12a003..c16f875ed9ea 100644
--- a/drivers/net/phy/mdio-mux.c
+++ b/drivers/net/phy/mdio-mux.c
@@ -178,11 +178,15 @@ int mdio_mux_init(struct device *dev,
cb->mii_bus->write = mdio_mux_write;
r = of_mdiobus_register(cb->mii_bus, child_bus_node);
if (r) {
+ mdiobus_free(cb->mii_bus);
+ if (r == -EPROBE_DEFER) {
+ ret_val = r;
+ goto err_loop;
+ }
+ devm_kfree(dev, cb);
dev_err(dev,
"Error: Failed to register MDIO bus for child %pOF\n",
child_bus_node);
- mdiobus_free(cb->mii_bus);
- devm_kfree(dev, cb);
} else {
cb->next = pb->children;
pb->children = cb;
--
2.30.2
From: NeilBrown <[email protected]>
[ Upstream commit 3f79f6f6247c83f448c8026c3ee16d4636ef8d4f ]
Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.
Calling the renameat2 with RENAME_EXCHANGE flags like
renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))
on two paths:
namesrc = dir1/subvol1/dir2
namedest = subvol2/subvol3
will cause key order problem with following write time tree-checker
report:
[1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
[1194842.322221] BTRFS info (device loop1): leaf 27574272 gen 8 total ptrs 11 free space 15444 owner 5
[1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
[1194842.338772] item 0 key (256 1 0) itemoff 16123 itemsize 160
[1194842.338793] inode generation 3 size 16 mode 40755
[1194842.338801] item 1 key (256 12 256) itemoff 16111 itemsize 12
[1194842.338809] item 2 key (256 84 2248503653) itemoff 16077 itemsize 34
[1194842.338817] dir oid 258 type 2
[1194842.338823] item 3 key (256 84 2363071922) itemoff 16043 itemsize 34
[1194842.338830] dir oid 257 type 2
[1194842.338836] item 4 key (256 96 2) itemoff 16009 itemsize 34
[1194842.338843] item 5 key (256 96 3) itemoff 15975 itemsize 34
[1194842.338852] item 6 key (257 1 0) itemoff 15815 itemsize 160
[1194842.338863] inode generation 6 size 8 mode 40755
[1194842.338869] item 7 key (257 12 256) itemoff 15801 itemsize 14
[1194842.338876] item 8 key (257 84 2505409169) itemoff 15767 itemsize 34
[1194842.338883] dir oid 256 type 2
[1194842.338888] item 9 key (257 96 2) itemoff 15733 itemsize 34
[1194842.338895] item 10 key (258 12 256) itemoff 15719 itemsize 14
[1194842.339163] BTRFS error (device loop1): block=27574272 write time tree block corruption detected
[1194842.339245] ------------[ cut here ]------------
[1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
[1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
[1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
[1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.512068] RSP: 0018:ffffa2c284d77da0 EFLAGS: 00010282
[1194842.512074] RAX: 0000000000000000 RBX: 0000000000001000 RCX: ffff928867bd9978
[1194842.512078] RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff928867bd9970
[1194842.512081] RBP: ffff92876b958000 R08: 0000000000000001 R09: 00000000000c0003
[1194842.512085] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[1194842.512088] R13: ffff92875f989f98 R14: 0000000000000000 R15: 0000000000000000
[1194842.512092] FS: 0000000000000000(0000) GS:ffff928867a00000(0000) knlGS:0000000000000000
[1194842.512095] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1194842.512099] CR2: 000055f5384da1f0 CR3: 0000000102fe4000 CR4: 00000000000006e0
[1194842.512103] Call Trace:
[1194842.512128] ? run_one_async_free+0x10/0x10 [btrfs]
[1194842.631729] btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
[1194842.631837] run_one_async_start+0x18/0x30 [btrfs]
[1194842.631938] btrfs_work_helper+0xd5/0x1d0 [btrfs]
[1194842.647482] process_one_work+0x262/0x5e0
[1194842.647520] worker_thread+0x4c/0x320
[1194842.655935] ? process_one_work+0x5e0/0x5e0
[1194842.655946] kthread+0x135/0x160
[1194842.655953] ? set_kthread_struct+0x40/0x40
[1194842.655965] ret_from_fork+0x1f/0x30
[1194842.672465] irq event stamp: 1729
[1194842.672469] hardirqs last enabled at (1735): [<ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
[1194842.672477] hardirqs last disabled at (1740): [<ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
[1194842.672482] softirqs last enabled at (1666): [<ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
[1194842.672491] softirqs last disabled at (1651): [<ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0
The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).
Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.
Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: [email protected] # 4.7+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/inode.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 7ca0fafcd5a6..275a89b8e4b8 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -9833,8 +9833,14 @@ static int btrfs_rename_exchange(struct inode *old_dir,
bool root_log_pinned = false;
bool dest_log_pinned = false;
- /* we only allow rename subvolume link between subvolumes */
- if (old_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest)
+ /*
+ * For non-subvolumes allow exchange only within one subvolume, in the
+ * same inode namespace. Two subvolumes (represented as directory) can
+ * be exchanged as they're a logical link and have a fixed inode number.
+ */
+ if (root != dest &&
+ (old_ino != BTRFS_FIRST_FREE_OBJECTID ||
+ new_ino != BTRFS_FIRST_FREE_OBJECTID))
return -EXDEV;
/* close the race window with snapshot create/destroy ioctl */
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit f7ad318ea0ad58ebe0e595e59aed270bb643b29b ]
This fixes the incorrect calculation for integer overflow
when the last address of iova range is 0xffffffff.
Fixes: ec33d031a14b ("vhost: detect 32 bit integer wrap around")
Reported-by: Jason Wang <[email protected]>
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vhost/vhost.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 4b5590f4e98b..93cdeb516594 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -685,10 +685,16 @@ static int log_access_ok(void __user *log_base, u64 addr, unsigned long sz)
(sz + VHOST_PAGE_SIZE * 8 - 1) / VHOST_PAGE_SIZE / 8);
}
+/* Make sure 64 bit math will not overflow. */
static bool vhost_overflow(u64 uaddr, u64 size)
{
- /* Make sure 64 bit math will not overflow. */
- return uaddr > ULONG_MAX || size > ULONG_MAX || uaddr > ULONG_MAX - size;
+ if (uaddr > ULONG_MAX || size > ULONG_MAX)
+ return true;
+
+ if (!size)
+ return false;
+
+ return uaddr > ULONG_MAX - size + 1;
}
/* Caller should have vq mutex and device mutex. */
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit df2474a22c42ce419b67067c52d71da06c385501 ]
Since 9e8925b67a ("locks: Allow disabling mandatory locking at compile
time"), attempts to mount filesystems with "-o mand" will fail.
Unfortunately, there is no other indiciation of the reason for the
failure.
Change how the function is defined for better readability. When
CONFIG_MANDATORY_FILE_LOCKING is disabled, printk a warning when
someone attempts to mount with -o mand.
Also, add a blurb to the mandatory-locking.txt file to explain about
the "mand" option, and the behavior one should expect when it is
disabled.
Reported-by: Jan Kara <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/filesystems/mandatory-locking.txt | 10 ++++++++++
fs/namespace.c | 11 ++++++++---
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/Documentation/filesystems/mandatory-locking.txt b/Documentation/filesystems/mandatory-locking.txt
index 0979d1d2ca8b..a251ca33164a 100644
--- a/Documentation/filesystems/mandatory-locking.txt
+++ b/Documentation/filesystems/mandatory-locking.txt
@@ -169,3 +169,13 @@ havoc if they lock crucial files. The way around it is to change the file
permissions (remove the setgid bit) before trying to read or write to it.
Of course, that might be a bit tricky if the system is hung :-(
+7. The "mand" mount option
+--------------------------
+Mandatory locking is disabled on all filesystems by default, and must be
+administratively enabled by mounting with "-o mand". That mount option
+is only allowed if the mounting task has the CAP_SYS_ADMIN capability.
+
+Since kernel v4.5, it is possible to disable mandatory locking
+altogether by setting CONFIG_MANDATORY_FILE_LOCKING to "n". A kernel
+with this disabled will reject attempts to mount filesystems with the
+"mand" mount option with the error status EPERM.
diff --git a/fs/namespace.c b/fs/namespace.c
index 473446ae9e9b..11def59b0d50 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1695,13 +1695,18 @@ static inline bool may_mount(void)
return ns_capable(current->nsproxy->mnt_ns->user_ns, CAP_SYS_ADMIN);
}
+#ifdef CONFIG_MANDATORY_FILE_LOCKING
static inline bool may_mandlock(void)
{
-#ifndef CONFIG_MANDATORY_FILE_LOCKING
- return false;
-#endif
return capable(CAP_SYS_ADMIN);
}
+#else
+static inline bool may_mandlock(void)
+{
+ pr_warn("VFS: \"mand\" mount option not supported");
+ return false;
+}
+#endif
/*
* Now umount can handle mount points as well as block devices.
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit 65ca89c2b12cca0d473f3dd54267568ad3af55cc ]
The commit 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically. However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O. The problem
will be fixed in 5.15, but we need to address it quickly for now.
The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.
Fixes: 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede <[email protected]>
Cc: <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index c877326cb0a6..96f7facd0fa0 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -135,7 +135,7 @@ static void sst_fill_alloc_params(struct snd_pcm_substream *substream,
snd_pcm_uframes_t period_size;
ssize_t periodbytes;
ssize_t buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- u32 buffer_addr = substream->runtime->dma_addr;
+ u32 buffer_addr = virt_to_phys(substream->runtime->dma_area);
channels = substream->runtime->channels;
period_size = substream->runtime->period_size;
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 86aab09a4870bb8346c9579864588c3d7f555299 ]
GCC complains about empty macros in an 'if' statement, so convert
them to 'do {} while (0)' macros.
Fixes these build warnings:
net/dccp/output.c: In function 'dccp_xmit_packet':
../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err);
net/dccp/ackvec.c: In function 'dccp_ackvec_update_old':
../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
163 | (unsigned long long)seqno, state);
Fixes: dc841e30eaea ("dccp: Extend CCID packet dequeueing interface")
Fixes: 380240864451 ("dccp ccid-2: Update code for the Ack Vector input/registration routine")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Gerrit Renker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dccp/dccp.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 0c55ffb859bf..121aa71fcb5c 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -44,9 +44,9 @@ extern bool dccp_debug;
#define dccp_pr_debug_cat(format, a...) DCCP_PRINTK(dccp_debug, format, ##a)
#define dccp_debug(fmt, a...) dccp_pr_debug_cat(KERN_DEBUG fmt, ##a)
#else
-#define dccp_pr_debug(format, a...)
-#define dccp_pr_debug_cat(format, a...)
-#define dccp_debug(format, a...)
+#define dccp_pr_debug(format, a...) do {} while (0)
+#define dccp_pr_debug_cat(format, a...) do {} while (0)
+#define dccp_debug(format, a...) do {} while (0)
#endif
extern struct inet_hashinfo dccp_hashinfo;
--
2.30.2
From: Jaroslav Kysela <[email protected]>
[ Upstream commit a2befe9380dd04ee76c871568deca00eedf89134 ]
The original code in the cap_put_caller() function does not
handle correctly the positive values returned from the passed
function for multiple iterations. It means that the change
notifications may be lost.
Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213851
Cc: <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_generic.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 1833deefe1af..cf406f22f406 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -3468,7 +3468,7 @@ static int cap_put_caller(struct snd_kcontrol *kcontrol,
struct hda_gen_spec *spec = codec->spec;
const struct hda_input_mux *imux;
struct nid_path *path;
- int i, adc_idx, err = 0;
+ int i, adc_idx, ret, err = 0;
imux = &spec->input_mux;
adc_idx = kcontrol->id.index;
@@ -3478,9 +3478,13 @@ static int cap_put_caller(struct snd_kcontrol *kcontrol,
if (!path || !path->ctls[type])
continue;
kcontrol->private_value = path->ctls[type];
- err = func(kcontrol, ucontrol);
- if (err < 0)
+ ret = func(kcontrol, ucontrol);
+ if (ret < 0) {
+ err = ret;
break;
+ }
+ if (ret > 0)
+ err = 1;
}
mutex_unlock(&codec->control_mutex);
if (err >= 0 && spec->cap_sync_hook)
--
2.30.2
From: Vincent Whitchurch <[email protected]>
[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ]
When a Data CRC interrupt is received, the driver disables the DMA, then
sends the stop/abort command and then waits for Data Transfer Over.
However, sometimes, when a data CRC error is received in the middle of a
multi-block write transfer, the Data Transfer Over interrupt is never
received, and the driver hangs and never completes the request.
The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
"before assertion of SWR". Do these operations in the recommended
order. With this change the Data Transfer Over is always received
correctly in my tests.
Signed-off-by: Vincent Whitchurch <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 32001d43e453..bd994a8fce14 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2051,8 +2051,8 @@ static void dw_mci_tasklet_func(unsigned long priv)
continue;
}
- dw_mci_stop_dma(host);
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_SENDING_STOP;
break;
}
@@ -2076,10 +2076,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
@@ -2112,10 +2112,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 19d1532a187669ce86d5a2696eb7275310070793 ]
Syzbot reported slab-out-of bounds write in decode_data().
The problem was in missing validation checks.
Syzbot's reproducer generated malicious input, which caused
decode_data() to be called a lot in sixpack_decode(). Since
rx_count_cooked is only 400 bytes and noone reported before,
that 400 bytes is not enough, let's just check if input is malicious
and complain about buffer overrun.
Fail log:
==================================================================
BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843
Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0
...
Workqueue: events_unbound flush_to_ldisc
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137
decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843
decode_data drivers/net/hamradio/6pack.c:965 [inline]
sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]
Reported-and-tested-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hamradio/6pack.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 6d4742d10a78..231eaef29266 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -870,6 +870,12 @@ static void decode_data(struct sixpack *sp, unsigned char inbyte)
return;
}
+ if (sp->rx_count_cooked + 2 >= sizeof(sp->cooked_buf)) {
+ pr_err("6pack: cooked buffer overrun, data loss\n");
+ sp->rx_count = 0;
+ return;
+ }
+
buf = sp->raw_buf;
sp->cooked_buf[sp->rx_count_cooked++] =
buf[0] | ((buf[1] << 2) & 0xc0);
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit fdd92b64d15bc4aec973caa25899afd782402e68 ]
We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.
Cc: [email protected]
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/namespace.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 11def59b0d50..683668a20bed 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1696,8 +1696,12 @@ static inline bool may_mount(void)
}
#ifdef CONFIG_MANDATORY_FILE_LOCKING
-static inline bool may_mandlock(void)
+static bool may_mandlock(void)
{
+ pr_warn_once("======================================================\n"
+ "WARNING: the mand mount option is being deprecated and\n"
+ " will be removed in v5.15!\n"
+ "======================================================\n");
return capable(CAP_SYS_ADMIN);
}
#else
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit 57a1681095f912239c7fb4d66683ab0425973838 ]
The function tpci200_register called by tpci200_install and
tpci200_unregister called by tpci200_uninstall are in pair. However,
tpci200_unregister has some cleanup operations not in the
tpci200_register. So the error handling code of tpci200_pci_probe has
many different double free issues.
Fix this problem by moving those cleanup operations out of
tpci200_unregister, into tpci200_pci_remove and reverting
the previous commit 9272e5d0028d ("ipack/carriers/tpci200:
Fix a double free in tpci200_pci_probe").
Fixes: 9272e5d0028d ("ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe")
Cc: [email protected]
Reported-by: Dongliang Mu <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ipack/carriers/tpci200.c | 36 ++++++++++++++++----------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
index 7ba1a94497f5..4294523bede5 100644
--- a/drivers/ipack/carriers/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -94,16 +94,13 @@ static void tpci200_unregister(struct tpci200_board *tpci200)
free_irq(tpci200->info->pdev->irq, (void *) tpci200);
pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
- pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
- pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
pci_disable_device(tpci200->info->pdev);
- pci_dev_put(tpci200->info->pdev);
}
static void tpci200_enable_irq(struct tpci200_board *tpci200,
@@ -524,7 +521,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
if (!tpci200->info) {
ret = -ENOMEM;
- goto out_err_info;
+ goto err_tpci200;
}
pci_dev_get(pdev);
@@ -535,7 +532,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (ret) {
dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory");
ret = -EBUSY;
- goto out_err_pci_request;
+ goto err_tpci200_info;
}
tpci200->info->cfg_regs = ioremap_nocache(
pci_resource_start(pdev, TPCI200_CFG_MEM_BAR),
@@ -543,7 +540,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (!tpci200->info->cfg_regs) {
dev_err(&pdev->dev, "Failed to map PCI Configuration Memory");
ret = -EFAULT;
- goto out_err_ioremap;
+ goto err_request_region;
}
/* Disable byte swapping for 16 bit IP module access. This will ensure
@@ -566,7 +563,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (ret) {
dev_err(&pdev->dev, "error during tpci200 install\n");
ret = -ENODEV;
- goto out_err_install;
+ goto err_cfg_regs;
}
/* Register the carrier in the industry pack bus driver */
@@ -578,7 +575,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev,
"error registering the carrier on ipack driver\n");
ret = -EFAULT;
- goto out_err_bus_register;
+ goto err_tpci200_install;
}
/* save the bus number given by ipack to logging purpose */
@@ -589,19 +586,16 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
tpci200_create_device(tpci200, i);
return 0;
-out_err_bus_register:
+err_tpci200_install:
tpci200_uninstall(tpci200);
- /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */
- tpci200->info->cfg_regs = NULL;
-out_err_install:
- if (tpci200->info->cfg_regs)
- iounmap(tpci200->info->cfg_regs);
-out_err_ioremap:
+err_cfg_regs:
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+err_request_region:
pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
-out_err_pci_request:
- pci_dev_put(pdev);
+err_tpci200_info:
kfree(tpci200->info);
-out_err_info:
+ pci_dev_put(pdev);
+err_tpci200:
kfree(tpci200);
return ret;
}
@@ -611,6 +605,12 @@ static void __tpci200_pci_remove(struct tpci200_board *tpci200)
ipack_bus_unregister(tpci200->info->ipack_bus);
tpci200_uninstall(tpci200);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
+
+ pci_dev_put(tpci200->info->pdev);
+
kfree(tpci200->info);
kfree(tpci200);
}
--
2.30.2
On Tue, Aug 24, 2021 at 01:03:53PM -0400, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 4.14.245 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 05:04:55 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 168 fail: 0
Qemu test results:
total: 420 pass: 420 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hello!
On 8/24/21 12:03 PM, Sasha Levin wrote:
> This is the start of the stable review cycle for the 4.14.245 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 05:04:55 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.244
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha
Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.14.245-rc1
* git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git', 'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
* git branch: linux-4.14.y
* git commit: 156fc46e6ef4f9c0821f84a6b7e5f60647b6cbf1
* git describe: v4.14.244-64-g156fc46e6ef4
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.244-64-g156fc46e6ef4
## No regressions (compared to v4.14.244)
## No fixes (compared to v4.14.244)
## Test result summary
total: 65609, pass: 53110, fail: 525, skip: 10267, xfail: 1707
## Build Summary
* arm: 98 total, 98 passed, 0 failed
* arm64: 28 total, 28 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
Daniel Díaz
[email protected]
--
Linaro LKFT
https://lkft.linaro.org
On 2021/8/25 1:03, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 4.14.245 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 05:04:55 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-4.14.y&id2=v4.14.244
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha
>
Tested on x86 for 4.14.245-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.245-rc1
Commit: 156fc46e6ef4f9c0821f84a6b7e5f60647b6cbf1
Compiler: gcc version 7.3.0 (GCC)
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8837
passed: 8837
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>