This is the start of the stable review cycle for the 4.14.283 release.
There are 218 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.283-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.283-rc1
Johan Hovold <[email protected]>
PCI: qcom: Fix unbalanced PHY init on probe errors
Tokunori Ikegami <[email protected]>
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
Tokunori Ikegami <[email protected]>
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
Pascal Hambourg <[email protected]>
md/raid0: Ignore RAID0 layout if the second zone has only one device
Michael Ellerman <[email protected]>
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
Mathias Nyman <[email protected]>
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
Olivier Matz <[email protected]>
ixgbe: fix unexpected VLAN Rx in promisc mode on VF
Olivier Matz <[email protected]>
ixgbe: fix bcast packets Rx on VF after promisc removal
Martin Faltesek <[email protected]>
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
Martin Faltesek <[email protected]>
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
Sergey Shtylyov <[email protected]>
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
Shyam Prasad N <[email protected]>
cifs: return errors during session setup during reconnects
huangwenhui <[email protected]>
ALSA: hda/conexant - Fix loopback issue with CX20632
Xie Yongji <[email protected]>
vringh: Fix loop descriptors check in the indirect cases
Kees Cook <[email protected]>
nodemask: Fix return values to be unsigned
Yu Kuai <[email protected]>
nbd: fix io hung while disconnecting device
Yu Kuai <[email protected]>
nbd: fix race between nbd_alloc_config() and module removal
Yu Kuai <[email protected]>
nbd: call genl_unregister_family() first in nbd_cleanup()
Masahiro Yamada <[email protected]>
modpost: fix undefined behavior of is_arm_mapping_symbol()
Gong Yuanjun <[email protected]>
drm/radeon: fix a possible null pointer dereference
Michal Kubecek <[email protected]>
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
Guoqing Jiang <[email protected]>
md: protect md_unregister_thread from reentrancy
Hao Luo <[email protected]>
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
John Ogness <[email protected]>
serial: msm_serial: disable interrupts in __msm_console_write()
Wang Cheng <[email protected]>
staging: rtl8712: fix uninit-value in r871xu_drv_init()
Andre Przywara <[email protected]>
clocksource/drivers/sp804: Avoid error on multiple instances
bumwoo lee <[email protected]>
extcon: Modify extcon device to be created after driver data is set
Shuah Khan <[email protected]>
misc: rtsx: set NULL intfdata when probe fails
Marek Szyprowski <[email protected]>
usb: dwc2: gadget: don't reset gadget's driver->bus
Evan Green <[email protected]>
USB: hcd-pci: Fully suspend across freeze/thaw cycle
Duoming Zhou <[email protected]>
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
Duoming Zhou <[email protected]>
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
Zhen Ni <[email protected]>
USB: host: isp116x: check return value after calling platform_get_resource()
Duoming Zhou <[email protected]>
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
Huang Guobin <[email protected]>
tty: Fix a possible resource leak in icom_probe
Zheyu Ma <[email protected]>
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
Kees Cook <[email protected]>
lkdtm/usercopy: Expand size of "out of frame" object
Xiaoke Wang <[email protected]>
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
Linus Torvalds <[email protected]>
drm: imx: fix compiler warning with gcc-12
Miaoqian Lin <[email protected]>
net: altera: Fix refcount leak in altera_tse_mdio_create
Masahiro Yamada <[email protected]>
net: ipv6: unexport __init-annotated seg6_hmac_init()
Masahiro Yamada <[email protected]>
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
Masahiro Yamada <[email protected]>
net: mdio: unexport __init-annotated mdio_bus_init()
Chuck Lever <[email protected]>
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
Gal Pressman <[email protected]>
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
Miaoqian Lin <[email protected]>
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
Kinglong Mee <[email protected]>
xprtrdma: treat all calls not a bcall when bc_serv is NULL
Yang Yingliang <[email protected]>
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
Greg Ungerer <[email protected]>
m68knommu: fix undefined reference to `_init_sp'
Greg Ungerer <[email protected]>
m68knommu: set ZERO_PAGE() to the allocated zeroed page
Lucas Tanure <[email protected]>
i2c: cadence: Increase timeout per message if necessary
Mark-PK Tsai <[email protected]>
tracing: Avoid adding tracer option before update_tracer_options
Jun Miao <[email protected]>
tracing: Fix sleeping function called from invalid context on RT kernel
Gong Yuanjun <[email protected]>
mips: cpc: Fix refcount leak in mips_cpc_default_phys_base
Leo Yan <[email protected]>
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
Eric Dumazet <[email protected]>
tcp: tcp_rtx_synack() can be called from process context
Zhihao Cheng <[email protected]>
ubi: ubi_create_volume: Fix use-after-free when volume creation failed
Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_do_fill_super
Alexander Lobakin <[email protected]>
modpost: fix removing numeric suffixes
Miaoqian Lin <[email protected]>
net: dsa: mv88e6xxx: Fix refcount leak in mv88e6xxx_mdios_register
Dan Carpenter <[email protected]>
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
Krzysztof Kozlowski <[email protected]>
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
Miaoqian Lin <[email protected]>
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
Ilpo Järvinen <[email protected]>
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
Ilpo Järvinen <[email protected]>
serial: sh-sci: Don't allow CS5-6
Ilpo Järvinen <[email protected]>
serial: txx9: Don't allow CS5-6
Ilpo Järvinen <[email protected]>
serial: digicolor-usart: Don't allow CS5-6
John Ogness <[email protected]>
serial: meson: acquire port->lock in startup()
Yang Yingliang <[email protected]>
rtc: mt6397: check return value after calling platform_get_resource()
Miaoqian Lin <[email protected]>
soc: rockchip: Fix refcount leak in rockchip_grf_init
Guilherme G. Piccoli <[email protected]>
coresight: cpu-debug: Replace mutex with mutex_trylock on panic notifier
Krzysztof Kozlowski <[email protected]>
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
Uwe Kleine-König <[email protected]>
pwm: lp3943: Fix duty calculation in case period was clamped
Lin Ma <[email protected]>
USB: storage: karma: fix rio_karma_init return
Niels Dossche <[email protected]>
usb: usbip: add missing device lock on tweak configuration cmd
Hangyu Hua <[email protected]>
usb: usbip: fix a refcount leak in stub_probe()
Wang Weiyang <[email protected]>
tty: goldfish: Use tty_port_destroy() to destroy port
Jakob Koschel <[email protected]>
staging: greybus: codecs: fix type confusion of list iterator variable
Randy Dunlap <[email protected]>
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: disallow non-stateful expression in sets earlier
Maciej W. Rozycki <[email protected]>
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
Xiao Yang <[email protected]>
RDMA/rxe: Generate a completion for unsupported/invalid opcode
Johan Hovold <[email protected]>
phy: qcom-qmp: fix reset-controller leak on probe errors
Dinh Nguyen <[email protected]>
dt-bindings: gpio: altera: correct interrupt-cells
Akira Yokosawa <[email protected]>
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
Johan Hovold <[email protected]>
phy: qcom-qmp: fix struct clk leak on probe errors
Kathiravan T <[email protected]>
arm64: dts: qcom: ipq8074: fix the sleep clock frequency
Xiaomeng Tong <[email protected]>
gma500: fix an incorrect NULL check on list iterator
Xiaomeng Tong <[email protected]>
carl9170: tx: fix an incorrect use of list iterator
Mark Brown <[email protected]>
ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control
Alexander Wetzel <[email protected]>
rtl818x: Prevent using not initialized queues
Mike Kravetz <[email protected]>
hugetlb: fix huge_pmd_unshare address update
Christophe de Dinechin <[email protected]>
nodemask.h: fix compilation error with GCC12
Xiaomeng Tong <[email protected]>
iommu/msm: Fix an incorrect NULL check on list iterator
Vincent Whitchurch <[email protected]>
um: Fix out-of-bounds read in LDT setup
Johannes Berg <[email protected]>
um: chan_user: Fix winch_tramp() return value
Felix Fietkau <[email protected]>
mac80211: upgrade passive scan to active scan on DFS channels after beacon rx
Max Filippov <[email protected]>
irqchip: irq-xtensa-mx: fix initial IRQ affinity
Pali Rohár <[email protected]>
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
Dennis Dalessandro <[email protected]>
RDMA/hfi1: Fix potential integer multiplication overflow errors
Xiaomeng Tong <[email protected]>
md: fix an incorrect NULL check in md_reload_sb
Xiaomeng Tong <[email protected]>
md: fix an incorrect NULL check in does_sb_need_changing
Brian Norris <[email protected]>
drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX
Xiaomeng Tong <[email protected]>
drm/nouveau/clk: Fix an incorrect NULL check on list iterator
Dave Airlie <[email protected]>
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
Manivannan Sadhasivam <[email protected]>
scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
Xiaomeng Tong <[email protected]>
scsi: dc395x: Fix a missing check on list iterator
Junxiao Bi via Ocfs2-devel <[email protected]>
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
Alexander Aring <[email protected]>
dlm: fix missing lkb refcount handling
Alexander Aring <[email protected]>
dlm: fix plock invalid read
Jan Kara <[email protected]>
ext4: avoid cycles in directory h-tree
Jan Kara <[email protected]>
ext4: verify dir block before splitting it
Ye Bin <[email protected]>
ext4: fix bug_on in ext4_writepages
Ye Bin <[email protected]>
ext4: fix use-after-free in ext4_rename_dir_prepare
Zhihao Cheng <[email protected]>
fs-writeback: writeback_sb_inodes：Recalculate 'wrote' according skipped pages
Emmanuel Grumbach <[email protected]>
iwlwifi: mvm: fix assert 1F04 upon reconfig
Johannes Berg <[email protected]>
wifi: mac80211: fix use-after-free in chanctx code
Zhengjun Xing <[email protected]>
perf jevents: Fix event syntax error caused by ExtSel
Leo Yan <[email protected]>
perf c2c: Use stdio interface if slang is not supported
Joerg Roedel <[email protected]>
iommu/amd: Increase timeout waiting for GA log enablement
Miaoqian Lin <[email protected]>
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
Yong Wu <[email protected]>
iommu/mediatek: Add list_del in mtk_iommu_remove
Björn Ardö <[email protected]>
mailbox: forward the hrtimer if not queued and under a lock
Miaoqian Lin <[email protected]>
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
Kajol Jain <[email protected]>
powerpc/perf: Fix the threshold compare group constraint for power9
Miaoqian Lin <[email protected]>
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Qi Zheng <[email protected]>
tty: fix deadlock caused by calling printk() under tty_port->lock
Randy Dunlap <[email protected]>
powerpc/4xx/cpm: Fix return value of __setup() handler
Randy Dunlap <[email protected]>
powerpc/idle: Fix return value of __setup() handler
Randy Dunlap <[email protected]>
powerpc/8xx: export 'cpm_setbrg' for modules
Miaohe Lin <[email protected]>
drivers/base/node.c: fix compaction sysfs file leak
Krzysztof Kozlowski <[email protected]>
pinctrl: mvebu: Fix irq_of_parse_and_map() return value
Gustavo A. R. Silva <[email protected]>
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
Lv Ruyi <[email protected]>
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
Stefan Wahren <[email protected]>
ARM: dts: bcm2835-rpi-b: Fix GPIO line names
Phil Elwell <[email protected]>
ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
Miaoqian Lin <[email protected]>
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
Miaoqian Lin <[email protected]>
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
David Howells <[email protected]>
rxrpc: Don't try to resend the request if we're receiving the reply
David Howells <[email protected]>
rxrpc: Fix listen() setting the bar too high for the prealloc rings
Yang Yingliang <[email protected]>
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
Eric Dumazet <[email protected]>
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
Geert Uytterhoeven <[email protected]>
m68k: math-emu: Fix dependencies of math emulation support
Ying Hsu <[email protected]>
Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout
Pavel Skripkin <[email protected]>
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
Miaoqian Lin <[email protected]>
media: exynos4-is: Change clk_disable to clk_disable_unprepare
Miaoqian Lin <[email protected]>
media: st-delta: Fix PM disable depth imbalance in delta_probe
Miaoqian Lin <[email protected]>
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
Miaoqian Lin <[email protected]>
ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe
Xiaomeng Tong <[email protected]>
media: uvcvideo: Fix missing check to determine if element is found in list
Dan Carpenter <[email protected]>
drm/msm: return an error pointer in msm_gem_prime_get_sg_table()
Randy Dunlap <[email protected]>
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
Krzysztof Kozlowski <[email protected]>
irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
Randy Dunlap <[email protected]>
x86: Fix return value of __setup handlers
Yang Yingliang <[email protected]>
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
Yang Yingliang <[email protected]>
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
Dmitry Baryshkov <[email protected]>
drm/msm/dsi: fix error checks and return values for DSI xmit functions
Matthieu Baerts <[email protected]>
x86/pm: Fix false positive kmemleak report in msr_build_context()
Amir Goldstein <[email protected]>
fsnotify: fix wrong lockdep annotations
Amir Goldstein <[email protected]>
inotify: show inotify mask flags in proc fdinfo
Dan Carpenter <[email protected]>
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
Zheng Yongjun <[email protected]>
spi: img-spfi: Fix pm_runtime_get_sync() error checking
Jonathan Teh <[email protected]>
HID: hid-led: fix maximum brightness for Dream Cheeky
Jan Kiszka <[email protected]>
efi: Add missing prototype for efi_capsule_setup_info
Lin Ma <[email protected]>
NFC: NULL out the dev->rfkill to prevent UAF
Miaoqian Lin <[email protected]>
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
Miles Chen <[email protected]>
drm/mediatek: Fix mtk_cec_mask()
Ammar Faizi <[email protected]>
x86/delay: Fix the wrong asm constraint in delay_loop()
Miaoqian Lin <[email protected]>
ASoC: mediatek: Fix missing of_node_put in mt2701_wm8960_machine_probe
Miaoqian Lin <[email protected]>
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
Wenli Looi <[email protected]>
ath9k: fix ar9003_get_eepmisc
Linus Torvalds <[email protected]>
drm: fix EDID struct for old ARM OABI format
Douglas Miller <[email protected]>
RDMA/hfi1: Prevent panic when SDMA is disabled
Finn Thain <[email protected]>
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
Lv Ruyi <[email protected]>
powerpc/xics: fix refcount leak in icp_opal_init()
Vasily Averin <[email protected]>
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
Yicong Yang <[email protected]>
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
Peng Wu <[email protected]>
ARM: hisi: Add missing of_node_put after of_find_compatible_node
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
Peng Wu <[email protected]>
ARM: versatile: Add missing of_node_put in dcscb_init
OGAWA Hirofumi <[email protected]>
fat: add ratelimit to fat*_ent_bread()
Janusz Krzysztofik <[email protected]>
ARM: OMAP1: clock: Fix UART rate reporting algorithm
Zixuan Fu <[email protected]>
fs: jfs: fix possible NULL pointer dereference in dbFree()
Krzysztof Kozlowski <[email protected]>
ARM: dts: ox820: align interrupt controller node name with dtschema
Jakub Kicinski <[email protected]>
eth: tg3: silence the GCC 12 array-bounds warning
David Howells <[email protected]>
rxrpc: Return an error to sendmsg if call failed
Kwanghoon Son <[email protected]>
media: exynos4-is: Fix compile warning
Fabio Estevam <[email protected]>
net: phy: micrel: Allow probing without .driver_data
Lin Ma <[email protected]>
ASoC: rt5645: Fix errorenous cleanup order
Smith, Kyle Miller (Nimble Kernel) <[email protected]>
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
Jason A. Donenfeld <[email protected]>
openrisc: start CPU timer early in boot
Dongliang Mu <[email protected]>
rtlwifi: Use pr_warn instead of WARN_ONCE
Corey Minyard <[email protected]>
ipmi:ssif: Check for NULL msg when handling events and messages
Mikulas Patocka <[email protected]>
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
Heiko Carstens <[email protected]>
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
Mark Brown <[email protected]>
ASoC: dapm: Don't fold register value changes into notifications
jianghaoran <[email protected]>
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
Evan Quan <[email protected]>
drm/amd/pm: fix the compile warning
Lv Ruyi <[email protected]>
scsi: megaraid: Fix error check return value of register_chrdev()
Zheyu Ma <[email protected]>
media: cx25821: Fix the warning when removing the module
Zheyu Ma <[email protected]>
media: pci: cx23885: Fix the error handling in cx23885_initdev()
Luca Weiss <[email protected]>
media: venus: hfi: avoid null dereference in deinit
Thibaut VARÈNE <[email protected]>
ath9k: fix QCA9561 PA bias level
Keita Suzuki <[email protected]>
drm/amd/pm: fix double free in si_parse_power_table()
Amadeusz Sławiński <[email protected]>
ALSA: jack: Access input_dev under mutex
Kirill A. Shutemov <[email protected]>
ACPICA: Avoid cache flush inside virtual machines
Haowen Bai <[email protected]>
ipw2x00: Fix potential NULL dereference in libipw_xmit()
Haowen Bai <[email protected]>
b43: Fix assigning negative value to unsigned variable
Haowen Bai <[email protected]>
b43legacy: Fix assigning negative value to unsigned variable
Niels Dossche <[email protected]>
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
Liu Zixian <[email protected]>
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
Qu Wenruo <[email protected]>
btrfs: repair super block num_devices automatically
Qu Wenruo <[email protected]>
btrfs: add "0x" prefix for unsupported optional features
Eric W. Biederman <[email protected]>
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
Eric W. Biederman <[email protected]>
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
Monish Kumar R <[email protected]>
USB: new quirk for Dell Gen 2 devices
Carl Yin(殷张成) <[email protected]>
USB: serial: option: add Quectel BG95 modem
Niklas Cassel <[email protected]>
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
-------------
Diffstat:
Documentation/ABI/testing/sysfs-ata | 5 +-
Documentation/conf.py | 2 +-
.../devicetree/bindings/gpio/gpio-altera.txt | 5 +-
Makefile | 4 +-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 13 ++-
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +-
arch/arm/boot/dts/ox820.dtsi | 2 +-
arch/arm/mach-hisi/platsmp.c | 4 +
arch/arm/mach-omap1/clock.c | 2 +-
arch/arm/mach-vexpress/dcscb.c | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
arch/m68k/Kconfig.cpu | 2 +-
arch/m68k/Kconfig.machine | 1 +
arch/m68k/include/asm/pgtable_no.h | 3 +-
.../include/asm/mach-ip27/cpu-feature-overrides.h | 1 -
arch/mips/kernel/mips-cpc.c | 1 +
arch/openrisc/include/asm/timex.h | 1 +
arch/openrisc/kernel/head.S | 9 +++
arch/powerpc/kernel/idle.c | 2 +-
arch/powerpc/kernel/ptrace.c | 18 ++++-
arch/powerpc/perf/isa207-common.c | 3 +-
arch/powerpc/platforms/4xx/cpm.c | 2 +-
arch/powerpc/sysdev/cpm1.c | 1 +
arch/powerpc/sysdev/fsl_rio.c | 2 +
arch/powerpc/sysdev/xics/icp-opal.c | 1 +
arch/s390/include/asm/preempt.h | 15 +++-
arch/um/drivers/chan_user.c | 9 ++-
arch/x86/entry/vdso/vma.c | 2 +-
arch/x86/include/asm/acenv.h | 14 +++-
arch/x86/include/asm/suspend_32.h | 2 +-
arch/x86/include/asm/suspend_64.h | 12 ++-
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/cpu/intel.c | 2 +-
arch/x86/kernel/step.c | 3 +-
arch/x86/kernel/sys_x86_64.c | 7 +-
arch/x86/lib/delay.c | 4 +-
arch/x86/mm/pat.c | 2 +-
arch/x86/um/ldt.c | 6 +-
arch/xtensa/kernel/ptrace.c | 4 +-
arch/xtensa/kernel/signal.c | 4 +-
drivers/ata/libata-transport.c | 2 +-
drivers/ata/pata_octeon_cf.c | 3 +
drivers/base/node.c | 1 +
drivers/block/nbd.c | 37 ++++++---
drivers/char/ipmi/ipmi_ssif.c | 23 ++++++
drivers/clocksource/timer-oxnas-rps.c | 2 +-
drivers/clocksource/timer-sp804.c | 10 +--
drivers/extcon/extcon.c | 29 ++++---
drivers/firmware/dmi-sysfs.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +-
drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 14 +---
drivers/gpu/drm/amd/amdgpu/si_dpm.c | 8 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 ++-
drivers/gpu/drm/gma500/psb_intel_display.c | 7 +-
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
drivers/gpu/drm/mediatek/mtk_cec.c | 2 +-
drivers/gpu/drm/msm/dsi/dsi_host.c | 21 +++--
drivers/gpu/drm/msm/hdmi/hdmi.c | 4 +
drivers/gpu/drm/msm/msm_gem_prime.c | 2 +-
drivers/gpu/drm/nouveau/nvkm/subdev/clk/base.c | 6 +-
drivers/gpu/drm/radeon/radeon_connectors.c | 4 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/virtio/virtgpu_display.c | 2 +
drivers/hid/hid-led.c | 2 +-
drivers/hwtracing/coresight/coresight-cpu-debug.c | 7 +-
drivers/i2c/busses/i2c-cadence.c | 12 ++-
drivers/iio/dummy/iio_simple_dummy.c | 20 +++--
drivers/infiniband/hw/hfi1/file_ops.c | 2 +
drivers/infiniband/hw/hfi1/init.c | 2 +-
drivers/infiniband/sw/rxe/rxe_req.c | 2 +-
drivers/input/misc/sparcspkr.c | 1 +
drivers/input/mouse/bcm5974.c | 7 +-
drivers/iommu/amd_iommu_init.c | 2 +-
drivers/iommu/msm_iommu.c | 11 ++-
drivers/iommu/mtk_iommu.c | 3 +-
drivers/irqchip/irq-armada-370-xp.c | 11 ++-
drivers/irqchip/irq-aspeed-i2c-ic.c | 4 +-
drivers/irqchip/irq-xtensa-mx.c | 18 ++++-
drivers/macintosh/Kconfig | 4 +
drivers/macintosh/Makefile | 3 +-
drivers/macintosh/via-pmu.c | 2 +-
drivers/mailbox/mailbox.c | 19 +++--
drivers/md/md.c | 33 +++++---
drivers/md/raid0.c | 31 ++++----
drivers/media/pci/cx23885/cx23885-core.c | 6 +-
drivers/media/pci/cx25821/cx25821-core.c | 2 +-
drivers/media/platform/exynos4-is/fimc-is.c | 2 +-
drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +-
drivers/media/platform/qcom/venus/hfi.c | 3 +
drivers/media/platform/sti/delta/delta-v4l2.c | 6 +-
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 7 +-
drivers/media/usb/uvc/uvc_v4l2.c | 20 ++---
drivers/mfd/ipaq-micro.c | 2 +-
drivers/mfd/rtsx_usb.c | 1 +
drivers/misc/lkdtm_usercopy.c | 17 +++-
drivers/mtd/chips/cfi_cmdset_0002.c | 93 ++++++++++++----------
drivers/mtd/ubi/vmt.c | 1 -
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
drivers/net/ethernet/altera/altera_tse_main.c | 6 +-
drivers/net/ethernet/broadcom/Makefile | 5 ++
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 8 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 2 +-
drivers/net/phy/mdio_bus.c | 1 -
drivers/net/phy/micrel.c | 11 +--
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 ++
drivers/net/wireless/ath/carl9170/tx.c | 3 +
drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +-
drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/power.c | 3 +
drivers/net/wireless/marvell/mwifiex/11h.c | 2 +
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c | 8 +-
drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +-
drivers/nfc/st21nfca/se.c | 15 +++-
drivers/nvme/host/pci.c | 1 +
drivers/pci/dwc/pcie-qcom.c | 7 +-
drivers/pci/pci.c | 10 +--
drivers/pcmcia/Kconfig | 2 +-
drivers/phy/qualcomm/phy-qcom-qmp.c | 11 ++-
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 2 +-
drivers/pwm/pwm-lp3943.c | 1 +
drivers/regulator/pfuze100-regulator.c | 2 +
drivers/rpmsg/qcom_smd.c | 2 +-
drivers/rtc/rtc-mt6397.c | 2 +
drivers/scsi/dc395x.c | 15 +++-
drivers/scsi/fcoe/fcoe_ctlr.c | 2 +-
drivers/scsi/megaraid.c | 2 +-
drivers/scsi/ufs/ufs-qcom.c | 7 +-
drivers/soc/qcom/smp2p.c | 1 +
drivers/soc/qcom/smsm.c | 1 +
drivers/soc/rockchip/grf.c | 2 +
drivers/spi/spi-img-spfi.c | 2 +-
drivers/spi/spi-ti-qspi.c | 5 +-
drivers/staging/greybus/audio_codec.c | 4 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 2 +-
drivers/staging/rtl8712/usb_intf.c | 6 +-
drivers/tty/goldfish.c | 2 +
drivers/tty/serial/digicolor-usart.c | 2 +
drivers/tty/serial/icom.c | 2 +-
drivers/tty/serial/meson_uart.c | 13 +++
drivers/tty/serial/msm_serial.c | 5 ++
drivers/tty/serial/sa1100.c | 4 +-
drivers/tty/serial/serial_txx9.c | 2 +
drivers/tty/serial/sh-sci.c | 6 +-
drivers/tty/serial/st-asc.c | 4 +
drivers/tty/synclink_gt.c | 2 +
drivers/tty/tty_buffer.c | 3 +-
drivers/usb/core/hcd-pci.c | 4 +-
drivers/usb/core/quirks.c | 3 +
drivers/usb/dwc2/gadget.c | 1 -
drivers/usb/host/isp116x-hcd.c | 6 +-
drivers/usb/host/oxu210hp-hcd.c | 2 +
drivers/usb/serial/option.c | 2 +
drivers/usb/storage/karma.c | 15 ++--
drivers/usb/usbip/stub_dev.c | 2 +-
drivers/usb/usbip/stub_rx.c | 2 +
drivers/vhost/vringh.c | 10 ++-
drivers/video/fbdev/amba-clcd.c | 5 +-
drivers/video/fbdev/pxa3xx-gcu.c | 12 +--
fs/binfmt_flat.c | 27 ++++++-
fs/btrfs/disk-io.c | 4 +-
fs/btrfs/volumes.c | 8 +-
fs/cifs/smb2pdu.c | 3 +
fs/dlm/lock.c | 11 ++-
fs/dlm/plock.c | 12 ++-
fs/ext4/inline.c | 12 +++
fs/ext4/namei.c | 84 +++++++++++++++----
fs/fat/fatent.c | 7 +-
fs/fs-writeback.c | 13 +--
fs/jffs2/fs.c | 1 +
fs/jfs/jfs_dmap.c | 3 +-
fs/kernfs/dir.c | 31 +++++---
fs/notify/fdinfo.c | 11 +--
fs/notify/inotify/inotify.h | 12 +++
fs/notify/inotify/inotify_user.c | 2 +-
fs/notify/mark.c | 6 +-
fs/ocfs2/dlmfs/userdlm.c | 16 +++-
include/drm/drm_edid.h | 6 +-
include/linux/efi.h | 2 +
include/linux/mailbox_controller.h | 1 +
include/linux/mtd/cfi.h | 1 +
include/linux/nodemask.h | 51 ++++++------
include/linux/ptrace.h | 6 --
include/scsi/libfcoe.h | 3 +-
include/sound/jack.h | 1 +
include/trace/events/vmscan.h | 4 +-
kernel/ptrace.c | 5 +-
kernel/trace/trace.c | 13 ++-
lib/dma-debug.c | 2 +-
lib/nodemask.c | 4 +-
mm/hugetlb.c | 9 ++-
net/bluetooth/sco.c | 21 +++--
net/ipv4/tcp_output.c | 4 +-
net/ipv4/xfrm4_protocol.c | 1 -
net/ipv6/addrconf.c | 3 +-
net/ipv6/seg6_hmac.c | 1 -
net/key/af_key.c | 10 ++-
net/mac80211/chan.c | 7 +-
net/mac80211/ieee80211_i.h | 5 ++
net/mac80211/scan.c | 20 +++++
net/netfilter/nf_tables_api.c | 16 ++--
net/netfilter/nft_dynset.c | 3 -
net/nfc/core.c | 1 +
net/rxrpc/call_event.c | 3 +-
net/rxrpc/sendmsg.c | 6 ++
net/rxrpc/sysctl.c | 4 +-
net/sctp/input.c | 4 +-
net/sunrpc/xdr.c | 6 +-
net/sunrpc/xprtrdma/rpc_rdma.c | 5 ++
scripts/mod/modpost.c | 5 +-
sound/core/jack.c | 34 ++++++--
sound/pci/hda/patch_conexant.c | 7 ++
sound/soc/codecs/rt5514.c | 2 +-
sound/soc/codecs/rt5645.c | 7 +-
sound/soc/codecs/wm2000.c | 6 +-
sound/soc/mediatek/mt2701/mt2701-wm8960.c | 9 ++-
sound/soc/mediatek/mt8173/mt8173-max98090.c | 5 +-
sound/soc/mxs/mxs-saif.c | 1 +
sound/soc/soc-dapm.c | 2 -
tools/perf/builtin-c2c.c | 10 ++-
tools/perf/pmu-events/jevents.c | 2 +-
225 files changed, 1103 insertions(+), 521 deletions(-)
From: Johannes Berg <[email protected]>
commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
Cc: [email protected]
Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/chan.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -1638,12 +1638,9 @@ int ieee80211_vif_use_reserved_context(s
if (new_ctx->replace_state == IEEE80211_CHANCTX_REPLACE_NONE) {
if (old_ctx)
- err = ieee80211_vif_use_reserved_reassign(sdata);
- else
- err = ieee80211_vif_use_reserved_assign(sdata);
+ return ieee80211_vif_use_reserved_reassign(sdata);
- if (err)
- return err;
+ return ieee80211_vif_use_reserved_assign(sdata);
}
/*
From: Amadeusz Sławiński <[email protected]>
[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]
It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock.
Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/sound/jack.h | 1 +
sound/core/jack.c | 34 +++++++++++++++++++++++++++-------
2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/include/sound/jack.h b/include/sound/jack.h
index 1e84bfb553cf..4742f842b457 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -77,6 +77,7 @@ struct snd_jack {
const char *id;
#ifdef CONFIG_SND_JACK_INPUT_DEV
struct input_dev *input_dev;
+ struct mutex input_dev_lock;
int registered;
int type;
char name[100];
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 36cfe1c54109..d2f9a92453f2 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -48,8 +48,11 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
#ifdef CONFIG_SND_JACK_INPUT_DEV
struct snd_jack *jack = device->device_data;
- if (!jack->input_dev)
+ mutex_lock(&jack->input_dev_lock);
+ if (!jack->input_dev) {
+ mutex_unlock(&jack->input_dev_lock);
return 0;
+ }
/* If the input device is registered with the input subsystem
* then we need to use a different deallocator. */
@@ -58,6 +61,7 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
else
input_free_device(jack->input_dev);
jack->input_dev = NULL;
+ mutex_unlock(&jack->input_dev_lock);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
return 0;
}
@@ -96,8 +100,11 @@ static int snd_jack_dev_register(struct snd_device *device)
snprintf(jack->name, sizeof(jack->name), "%s %s",
card->shortname, jack->id);
- if (!jack->input_dev)
+ mutex_lock(&jack->input_dev_lock);
+ if (!jack->input_dev) {
+ mutex_unlock(&jack->input_dev_lock);
return 0;
+ }
jack->input_dev->name = jack->name;
@@ -122,6 +129,7 @@ static int snd_jack_dev_register(struct snd_device *device)
if (err == 0)
jack->registered = 1;
+ mutex_unlock(&jack->input_dev_lock);
return err;
}
#endif /* CONFIG_SND_JACK_INPUT_DEV */
@@ -242,9 +250,11 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
return -ENOMEM;
}
- /* don't creat input device for phantom jack */
- if (!phantom_jack) {
#ifdef CONFIG_SND_JACK_INPUT_DEV
+ mutex_init(&jack->input_dev_lock);
+
+ /* don't create input device for phantom jack */
+ if (!phantom_jack) {
int i;
jack->input_dev = input_allocate_device();
@@ -262,8 +272,8 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
input_set_capability(jack->input_dev, EV_SW,
jack_switch_types[i]);
-#endif /* CONFIG_SND_JACK_INPUT_DEV */
}
+#endif /* CONFIG_SND_JACK_INPUT_DEV */
err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops);
if (err < 0)
@@ -303,10 +313,14 @@ EXPORT_SYMBOL(snd_jack_new);
void snd_jack_set_parent(struct snd_jack *jack, struct device *parent)
{
WARN_ON(jack->registered);
- if (!jack->input_dev)
+ mutex_lock(&jack->input_dev_lock);
+ if (!jack->input_dev) {
+ mutex_unlock(&jack->input_dev_lock);
return;
+ }
jack->input_dev->dev.parent = parent;
+ mutex_unlock(&jack->input_dev_lock);
}
EXPORT_SYMBOL(snd_jack_set_parent);
@@ -354,6 +368,8 @@ EXPORT_SYMBOL(snd_jack_set_key);
/**
* snd_jack_report - Report the current status of a jack
+ * Note: This function uses mutexes and should be called from a
+ * context which can sleep (such as a workqueue).
*
* @jack: The jack to report status for
* @status: The current status of the jack
@@ -373,8 +389,11 @@ void snd_jack_report(struct snd_jack *jack, int status)
status & jack_kctl->mask_bits);
#ifdef CONFIG_SND_JACK_INPUT_DEV
- if (!jack->input_dev)
+ mutex_lock(&jack->input_dev_lock);
+ if (!jack->input_dev) {
+ mutex_unlock(&jack->input_dev_lock);
return;
+ }
for (i = 0; i < ARRAY_SIZE(jack->key); i++) {
int testbit = SND_JACK_BTN_0 >> i;
@@ -393,6 +412,7 @@ void snd_jack_report(struct snd_jack *jack, int status)
}
input_sync(jack->input_dev);
+ mutex_unlock(&jack->input_dev_lock);
#endif /* CONFIG_SND_JACK_INPUT_DEV */
}
EXPORT_SYMBOL(snd_jack_report);
--
2.35.1
From: Amir Goldstein <[email protected]>
[ Upstream commit a32e697cda27679a0327ae2cafdad8c7170f548f ]
The inotify mask flags IN_ONESHOT and IN_EXCL_UNLINK are not "internal
to kernel" and should be exposed in procfs fdinfo so CRIU can restore
them.
Fixes: 6933599697c9 ("inotify: hide internal kernel bits from fdinfo")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/notify/fdinfo.c | 11 ++---------
fs/notify/inotify/inotify.h | 12 ++++++++++++
fs/notify/inotify/inotify_user.c | 2 +-
3 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c
index 517f88c1dbe5..c62a87ee3b00 100644
--- a/fs/notify/fdinfo.c
+++ b/fs/notify/fdinfo.c
@@ -83,16 +83,9 @@ static void inotify_fdinfo(struct seq_file *m, struct fsnotify_mark *mark)
inode_mark = container_of(mark, struct inotify_inode_mark, fsn_mark);
inode = igrab(mark->connector->inode);
if (inode) {
- /*
- * IN_ALL_EVENTS represents all of the mask bits
- * that we expose to userspace. There is at
- * least one bit (FS_EVENT_ON_CHILD) which is
- * used only internally to the kernel.
- */
- u32 mask = mark->mask & IN_ALL_EVENTS;
- seq_printf(m, "inotify wd:%x ino:%lx sdev:%x mask:%x ignored_mask:%x ",
+ seq_printf(m, "inotify wd:%x ino:%lx sdev:%x mask:%x ignored_mask:0 ",
inode_mark->wd, inode->i_ino, inode->i_sb->s_dev,
- mask, mark->ignored_mask);
+ inotify_mark_user_mask(mark));
show_mark_fhandle(m, inode);
seq_putc(m, '\n');
iput(inode);
diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h
index c00d2caca894..63050e25c84d 100644
--- a/fs/notify/inotify/inotify.h
+++ b/fs/notify/inotify/inotify.h
@@ -21,6 +21,18 @@ static inline struct inotify_event_info *INOTIFY_E(struct fsnotify_event *fse)
return container_of(fse, struct inotify_event_info, fse);
}
+/*
+ * INOTIFY_USER_FLAGS represents all of the mask bits that we expose to
+ * userspace. There is at least one bit (FS_EVENT_ON_CHILD) which is
+ * used only internally to the kernel.
+ */
+#define INOTIFY_USER_MASK (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK)
+
+static inline __u32 inotify_mark_user_mask(struct fsnotify_mark *fsn_mark)
+{
+ return fsn_mark->mask & INOTIFY_USER_MASK;
+}
+
extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark,
struct fsnotify_group *group);
extern int inotify_handle_event(struct fsnotify_group *group,
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 7cc7d3fb1862..2393956542bc 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -95,7 +95,7 @@ static inline __u32 inotify_arg_to_mask(u32 arg)
mask = (FS_IN_IGNORED | FS_EVENT_ON_CHILD | FS_UNMOUNT);
/* mask off the flags used to open the fd */
- mask |= (arg & (IN_ALL_EVENTS | IN_ONESHOT | IN_EXCL_UNLINK));
+ mask |= (arg & INOTIFY_USER_MASK);
return mask;
}
--
2.35.1
From: Pablo Neira Ayuso <[email protected]>
commit 520778042ccca019f3ffa136dd0ca565c486cedd upstream.
Since 3e135cd499bf ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.
cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.
nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.
This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.
The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.
For the record, this is the KASAN splat.
[ 85.431824] ==================================================================
[ 85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[ 85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[ 85.434756]
[ 85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G W 5.18.0+ #2
[ 85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Fixes: 0b2d8a7b638b ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: Aaron Adams <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
[Ajay: Regenerated the patch for v4.14.y]
Signed-off-by: Ajay Kaher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_tables_api.c | 16 ++++++++++------
net/netfilter/nft_dynset.c | 3 ---
2 files changed, 10 insertions(+), 9 deletions(-)
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1952,23 +1952,27 @@ struct nft_expr *nft_expr_init(const str
err = nf_tables_expr_parse(ctx, nla, &info);
if (err < 0)
- goto err1;
+ goto err_expr_parse;
+
+ err = -EOPNOTSUPP;
+ if (!(info.ops->type->flags & NFT_EXPR_STATEFUL))
+ goto err_expr_stateful;
err = -ENOMEM;
expr = kzalloc(info.ops->size, GFP_KERNEL);
if (expr == NULL)
- goto err2;
+ goto err_expr_stateful;
err = nf_tables_newexpr(ctx, &info, expr);
if (err < 0)
- goto err3;
+ goto err_expr_new;
return expr;
-err3:
+err_expr_new:
kfree(expr);
-err2:
+err_expr_stateful:
module_put(info.ops->type->owner);
-err1:
+err_expr_parse:
return ERR_PTR(err);
}
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -191,9 +191,6 @@ static int nft_dynset_init(const struct
if (IS_ERR(priv->expr))
return PTR_ERR(priv->expr);
- err = -EOPNOTSUPP;
- if (!(priv->expr->ops->type->flags & NFT_EXPR_STATEFUL))
- goto err1;
} else if (set->flags & NFT_SET_EVAL)
return -EINVAL;
From: Xiaomeng Tong <[email protected]>
commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream.
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
Cc: [email protected]
Fixes: f78ebca8ff3d6 ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/msm_iommu.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/iommu/msm_iommu.c
+++ b/drivers/iommu/msm_iommu.c
@@ -638,16 +638,19 @@ static void insert_iommu_master(struct d
static int qcom_iommu_of_xlate(struct device *dev,
struct of_phandle_args *spec)
{
- struct msm_iommu_dev *iommu;
+ struct msm_iommu_dev *iommu = NULL, *iter;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&msm_iommu_lock, flags);
- list_for_each_entry(iommu, &qcom_iommu_devices, dev_node)
- if (iommu->dev->of_node == spec->np)
+ list_for_each_entry(iter, &qcom_iommu_devices, dev_node) {
+ if (iter->dev->of_node == spec->np) {
+ iommu = iter;
break;
+ }
+ }
- if (!iommu || iommu->dev->of_node != spec->np) {
+ if (!iommu) {
ret = -ENODEV;
goto fail;
}
From: Miaoqian Lin <[email protected]>
[ Upstream commit aad66a3c78da668f4506356c2fdb70b7a19ecc76 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/smsm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 2b49d2c212da..5304529b41c9 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -367,6 +367,7 @@ static int smsm_parse_ipc(struct qcom_smsm *smsm, unsigned host_id)
return 0;
host->ipc_regmap = syscon_node_to_regmap(syscon);
+ of_node_put(syscon);
if (IS_ERR(host->ipc_regmap))
return PTR_ERR(host->ipc_regmap);
--
2.35.1
From: Kees Cook <[email protected]>
[ Upstream commit f387e86d3a74407bdd9c5815820ac9d060962840 ]
To be sufficiently out of range for the usercopy test to see the lifetime
mismatch, expand the size of the "bad" buffer, which will let it be
beyond current_stack_pointer regardless of stack growth direction.
Paired with the recent addition of stack depth checking under
CONFIG_HARDENED_USERCOPY=y, this will correctly start tripping again.
Reported-by: Muhammad Usama Anjum <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Muhammad Usama Anjum <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/lkdtm_usercopy.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/lkdtm_usercopy.c b/drivers/misc/lkdtm_usercopy.c
index a64372cc148d..178b55141772 100644
--- a/drivers/misc/lkdtm_usercopy.c
+++ b/drivers/misc/lkdtm_usercopy.c
@@ -30,12 +30,12 @@ static const unsigned char test_text[] = "This is a test.\n";
*/
static noinline unsigned char *trick_compiler(unsigned char *stack)
{
- return stack + 0;
+ return stack + unconst;
}
static noinline unsigned char *do_usercopy_stack_callee(int value)
{
- unsigned char buf[32];
+ unsigned char buf[128];
int i;
/* Exercise stack to avoid everything living in registers. */
@@ -43,7 +43,12 @@ static noinline unsigned char *do_usercopy_stack_callee(int value)
buf[i] = value & 0xff;
}
- return trick_compiler(buf);
+ /*
+ * Put the target buffer in the middle of stack allocation
+ * so that we don't step on future stack users regardless
+ * of stack growth direction.
+ */
+ return trick_compiler(&buf[(128/2)-32]);
}
static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
@@ -66,6 +71,12 @@ static noinline void do_usercopy_stack(bool to_user, bool bad_frame)
bad_stack -= sizeof(unsigned long);
}
+#ifdef ARCH_HAS_CURRENT_STACK_POINTER
+ pr_info("stack : %px\n", (void *)current_stack_pointer);
+#endif
+ pr_info("good_stack: %px-%px\n", good_stack, good_stack + sizeof(good_stack));
+ pr_info("bad_stack : %px-%px\n", bad_stack, bad_stack + sizeof(good_stack));
+
user_addr = vm_mmap(NULL, 0, PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_ANONYMOUS | MAP_PRIVATE, 0);
--
2.35.1
From: Janusz Krzysztofik <[email protected]>
[ Upstream commit 338d5d476cde853dfd97378d20496baabc2ce3c0 ]
Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number. Fix it.
Signed-off-by: Janusz Krzysztofik <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap1/clock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fa512413a471..b277409f303a 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(clockfw_lock);
unsigned long omap1_uart_recalc(struct clk *clk)
{
unsigned int val = __raw_readl(clk->enable_reg);
- return val & clk->enable_bit ? 48000000 : 12000000;
+ return val & 1 << clk->enable_bit ? 48000000 : 12000000;
}
unsigned long omap1_sossi_recalc(struct clk *clk)
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 4f4e0454e226de3bf4efd7e7924d1edc571c52d5 ]
Call of_node_put(platform_node) to avoid refcount leak in
the error path.
Fixes: 94319ba10eca ("ASoC: mediatek: Use platform_of_node for machine drivers")
Fixes: 493433785df0 ("ASoC: mediatek: mt8173: fix device_node leak")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8173/mt8173-max98090.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index 0adb7ded61e9..0f460bc77f47 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -164,7 +164,8 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
if (!codec_node) {
dev_err(&pdev->dev,
"Property 'audio-codec' missing or invalid\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_platform_node;
}
for (i = 0; i < card->num_links; i++) {
if (mt8173_max98090_dais[i].codec_name)
@@ -179,6 +180,8 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
__func__, ret);
of_node_put(codec_node);
+
+put_platform_node:
of_node_put(platform_node);
return ret;
}
--
2.35.1
From: Greg Ungerer <[email protected]>
[ Upstream commit a71b9e66fee47c59b3ec34e652b5c23bc6550794 ]
When configuring a nommu classic m68k system enabling the uboot parameter
passing support (CONFIG_UBOOT) will produce the following compile error:
m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline':
uboot.c:(.init.text+0x32): undefined reference to `_init_sp'
The logic to support this option is only used on ColdFire based platforms
(in its head.S startup code). So make the selection of this option
depend on building for a ColdFire based platform.
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/Kconfig.machine | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 4a1697fa9a37..1054c5400671 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -309,6 +309,7 @@ comment "Machine Options"
config UBOOT
bool "Support for U-Boot command line parameters"
+ depends on COLDFIRE
help
If you say Y here kernel will try to collect command
line parameters from the initial u-boot stack.
--
2.35.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 5bb99fd4090fe1acfdb90a97993fcda7f8f5a3d6 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().
Fixes: d164f6d4f910 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/4xx/cpm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/4xx/cpm.c b/arch/powerpc/platforms/4xx/cpm.c
index 53ff81ca8a3c..6400ae376216 100644
--- a/arch/powerpc/platforms/4xx/cpm.c
+++ b/arch/powerpc/platforms/4xx/cpm.c
@@ -341,6 +341,6 @@ late_initcall(cpm_init);
static int __init cpm_powersave_off(char *arg)
{
cpm.powersave_off = 1;
- return 0;
+ return 1;
}
__setup("powersave=off", cpm_powersave_off);
--
2.35.1
From: Olivier Matz <[email protected]>
commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream.
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.
For instance, in this situation:
┌────────┐ ┌────────┐ ┌────────┐
│ │ │ │ │ │
│ │ │ │ │ │
│ VF0├────┤VF1 VF2├────┤VF3 │
│ │ │ │ │ │
└────────┘ └────────┘ └────────┘
VM1 VM2 VM3
vf 0: vlan 1000
vf 1: vlan 1000
vf 2: vlan 1001
vf 3: vlan 1001
If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.
This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.
This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.
Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: [email protected]
Cc: Nicolas Dichtel <[email protected]>
Signed-off-by: Olivier Matz <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -1180,9 +1180,9 @@ static int ixgbe_update_vf_xcast_mode(st
return -EPERM;
}
- disable = 0;
+ disable = IXGBE_VMOLR_VPE;
enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
- IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
+ IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE;
break;
default:
return -EOPNOTSUPP;
From: Evan Green <[email protected]>
[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ]
The documentation for the freeze() method says that it "should quiesce
the device so that it doesn't generate IRQs or DMA". The unspoken
consequence of not doing this is that MSIs aimed at non-boot CPUs may
get fully lost if they're sent during the period where the target CPU is
offline.
The current callbacks for USB HCD do not fully quiesce interrupts,
specifically on XHCI. Change to use the full suspend/resume flow for
freeze/thaw to ensure interrupts are fully quiesced. This fixes issues
where USB devices fail to thaw during hibernation because XHCI misses
its interrupt and cannot recover.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Evan Green <[email protected]>
Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/hcd-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5340d433cdf0..18b3a5e518cd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -632,10 +632,10 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.suspend_noirq = hcd_pci_suspend_noirq,
.resume_noirq = hcd_pci_resume_noirq,
.resume = hcd_pci_resume,
- .freeze = check_root_hub_suspended,
+ .freeze = hcd_pci_suspend,
.freeze_noirq = check_root_hub_suspended,
.thaw_noirq = NULL,
- .thaw = NULL,
+ .thaw = hcd_pci_resume,
.poweroff = hcd_pci_suspend,
.poweroff_noirq = hcd_pci_suspend_noirq,
.restore_noirq = hcd_pci_resume_noirq,
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 2be84f73785fa9ed6443e3c5b158730266f1c2ee ]
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Fixes: 08641c7c74dd ("ASoC: mxs: add device tree support for mxs-saif")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mxs/mxs-saif.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 93c019670199..6d0ab4e75518 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -780,6 +780,7 @@ static int mxs_saif_probe(struct platform_device *pdev)
saif->master_id = saif->id;
} else {
ret = of_alias_get_id(master, "saif");
+ of_node_put(master);
if (ret < 0)
return ret;
else
--
2.35.1
From: Peng Wu <[email protected]>
[ Upstream commit 9bc72e47d4630d58a840a66a869c56b29554cfe4 ]
of_find_compatible_node will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak
Signed-off-by: Peng Wu <[email protected]>
Signed-off-by: Wei Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-hisi/platsmp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index da5689ababf7..d7fbfb6d293d 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -70,14 +70,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
}
ctrl_base = of_iomap(np, 0);
if (!ctrl_base) {
+ of_node_put(np);
pr_err("failed to map address\n");
return;
}
if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+ of_node_put(np);
pr_err("failed to find smp-offset property\n");
return;
}
ctrl_base += offset;
+ of_node_put(np);
}
}
@@ -163,6 +166,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
if (WARN_ON(!node))
return -1;
ctrl_base = of_iomap(node, 0);
+ of_node_put(node);
/* set the secondary core boot from DDR */
remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ]
of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() to avoid refcount leak.
Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_octeon_cf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index ac3b1fda820f..c240d8cbfd41 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -888,12 +888,14 @@ static int octeon_cf_probe(struct platform_device *pdev)
int i;
res_dma = platform_get_resource(dma_dev, IORESOURCE_MEM, 0);
if (!res_dma) {
+ put_device(&dma_dev->dev);
of_node_put(dma_node);
return -EINVAL;
}
cf_port->dma_base = (u64)devm_ioremap_nocache(&pdev->dev, res_dma->start,
resource_size(res_dma));
if (!cf_port->dma_base) {
+ put_device(&dma_dev->dev);
of_node_put(dma_node);
return -EINVAL;
}
@@ -903,6 +905,7 @@ static int octeon_cf_probe(struct platform_device *pdev)
irq = i;
irq_handler = octeon_cf_interrupt;
}
+ put_device(&dma_dev->dev);
}
of_node_put(dma_node);
}
--
2.35.1
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 52bb1cb7118564166b04d52387bd8403632f5190 ]
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.
Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/st-asc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index b313a792b149..44d52c087c56 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -545,10 +545,14 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
/* set character length */
if ((cflag & CSIZE) == CS7) {
ctrl_val |= ASC_CTL_MODE_7BIT_PAR;
+ cflag |= PARENB;
} else {
ctrl_val |= (cflag & PARENB) ? ASC_CTL_MODE_8BIT_PAR :
ASC_CTL_MODE_8BIT;
+ cflag &= ~CSIZE;
+ cflag |= CS8;
}
+ termios->c_cflag = cflag;
/* set stop bit */
ctrl_val |= (cflag & CSTOPB) ? ASC_CTL_STOP_2BIT : ASC_CTL_STOP_1BIT;
--
2.35.1
From: Vasily Averin <[email protected]>
[ Upstream commit 2b132903de7124dd9a758be0c27562e91a510848 ]
Fixes following sparse warnings:
CHECK mm/vmscan.c
mm/vmscan.c: note: in included file (through
include/trace/trace_events.h, include/trace/define_trace.h,
include/trace/events/vmscan.h):
./include/trace/events/vmscan.h:281:1: sparse: warning:
cast to restricted isolate_mode_t
./include/trace/events/vmscan.h:281:1: sparse: warning:
restricted isolate_mode_t degrades to integer
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vasily Averin <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/vmscan.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index dc23cf032403..9553f6167e51 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -290,7 +290,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
__field(unsigned long, nr_scanned)
__field(unsigned long, nr_skipped)
__field(unsigned long, nr_taken)
- __field(isolate_mode_t, isolate_mode)
+ __field(unsigned int, isolate_mode)
__field(int, lru)
),
@@ -301,7 +301,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
__entry->nr_scanned = nr_scanned;
__entry->nr_skipped = nr_skipped;
__entry->nr_taken = nr_taken;
- __entry->isolate_mode = isolate_mode;
+ __entry->isolate_mode = (__force unsigned int)isolate_mode;
__entry->lru = lru;
),
--
2.35.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 1ef64b1e89e6d4018da46e08ffc32779a31160c7 ]
Clean up control_va_addr_alignment():
a. Make '=' required instead of optional (as documented).
b. Print a warning if an invalid option value is used.
c. Return 1 from the __setup handler when an invalid option value is
used. This prevents the kernel from polluting init's (limited)
environment space with the entire string.
Fixes: dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h")
Reported-by: Igor Zhbanov <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/sys_x86_64.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index a63fe77b3217..7a08c42770f1 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -70,9 +70,6 @@ static int __init control_va_addr_alignment(char *str)
if (*str == 0)
return 1;
- if (*str == '=')
- str++;
-
if (!strcmp(str, "32"))
va_align.flags = ALIGN_VA_32;
else if (!strcmp(str, "64"))
@@ -82,11 +79,11 @@ static int __init control_va_addr_alignment(char *str)
else if (!strcmp(str, "on"))
va_align.flags = ALIGN_VA_32 | ALIGN_VA_64;
else
- return 0;
+ pr_warn("invalid option value: 'align_va_addr=%s'\n", str);
return 1;
}
-__setup("align_va_addr", control_va_addr_alignment);
+__setup("align_va_addr=", control_va_addr_alignment);
SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
--
2.35.1
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 79ac88655dc0551e3571ad16bdabdbe65d61553e ]
Only CS7 and CS8 are supported but CSIZE is not sanitized with
CS5 or CS6 to CS8.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/serial_txx9.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index ba77e72057a9..5d41884f5012 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -652,6 +652,8 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
case CS6: /* not supported */
case CS8:
cval |= TXX9_SILCR_UMODE_8BIT;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
break;
}
--
2.35.1
From: Gong Yuanjun <[email protected]>
[ Upstream commit 4107fa700f314592850e2c64608f6ede4c077476 ]
Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().
Signed-off-by: Gong Yuanjun <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/mips-cpc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index fcf9af492d60..cf46502c605e 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -31,6 +31,7 @@ phys_addr_t __weak mips_cpc_default_phys_base(void)
cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc");
if (cpc_node) {
err = of_address_to_resource(cpc_node, 0, &res);
+ of_node_put(cpc_node);
if (!err)
return res.start;
}
--
2.35.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 1a358d35066487d228a68303d808bc4721c6b1b9 ]
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rpmsg/qcom_smd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 72d02bfeda9e..781df7a17b56 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1299,7 +1299,7 @@ static int qcom_smd_parse_edge(struct device *dev,
edge->name = node->name;
irq = irq_of_parse_and_map(node, 0);
- if (irq < 0) {
+ if (!irq) {
dev_err(dev, "required smd interrupt missing\n");
return -EINVAL;
}
--
2.35.1
From: Johan Hovold <[email protected]>
commit f0a4bc38a12f5a0cc5ad68670d9480e91e6a94df upstream.
Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral).
Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: [email protected] # 4.12
Cc: Vivek Gautam <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -1123,7 +1123,7 @@ int qcom_qmp_phy_create(struct device *d
* all phys that don't need this.
*/
snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
- qphy->pipe_clk = of_clk_get_by_name(np, prop_name);
+ qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
if (IS_ERR(qphy->pipe_clk)) {
if (qmp->cfg->type == PHY_TYPE_PCIE ||
qmp->cfg->type == PHY_TYPE_USB3) {
From: Xiaomeng Tong <[email protected]>
commit bdef417d84536715145f6dc9cc3275c46f26295a upstream.
The bug is here:
return crtc;
The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.
To fix the bug, return 'crtc' when found, otherwise return NULL.
Cc: [email protected]
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <[email protected]>
Signed-off-by: Patrik Jakobsson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/gma500/psb_intel_display.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/gma500/psb_intel_display.c
+++ b/drivers/gpu/drm/gma500/psb_intel_display.c
@@ -543,14 +543,15 @@ void psb_intel_crtc_init(struct drm_devi
struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
{
- struct drm_crtc *crtc = NULL;
+ struct drm_crtc *crtc;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+
if (gma_crtc->pipe == pipe)
- break;
+ return crtc;
}
- return crtc;
+ return NULL;
}
int gma_connector_clones(struct drm_device *dev, int type_mask)
From: Eric Dumazet <[email protected]>
[ Upstream commit 0a375c822497ed6ad6b5da0792a12a6f1af10c0b ]
Laurent reported the enclosed report [1]
This bug triggers with following coditions:
0) Kernel built with CONFIG_DEBUG_PREEMPT=y
1) A new passive FastOpen TCP socket is created.
This FO socket waits for an ACK coming from client to be a complete
ESTABLISHED one.
2) A socket operation on this socket goes through lock_sock()
release_sock() dance.
3) While the socket is owned by the user in step 2),
a retransmit of the SYN is received and stored in socket backlog.
4) At release_sock() time, the socket backlog is processed while
in process context.
5) A SYNACK packet is cooked in response of the SYN retransmit.
6) -> tcp_rtx_synack() is called in process context.
Before blamed commit, tcp_rtx_synack() was always called from BH handler,
from a timer handler.
Fix this by using TCP_INC_STATS() & NET_INC_STATS()
which do not assume caller is in non preemptible context.
[1]
BUG: using __this_cpu_add() in preemptible [00000000] code: epollpep/2180
caller is tcp_rtx_synack.part.0+0x36/0xc0
CPU: 10 PID: 2180 Comm: epollpep Tainted: G OE 5.16.0-0.bpo.4-amd64 #1 Debian 5.16.12-1~bpo11+1
Hardware name: Supermicro SYS-5039MC-H8TRF/X11SCD-F, BIOS 1.7 11/23/2021
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5e
check_preemption_disabled+0xde/0xe0
tcp_rtx_synack.part.0+0x36/0xc0
tcp_rtx_synack+0x8d/0xa0
? kmem_cache_alloc+0x2e0/0x3e0
? apparmor_file_alloc_security+0x3b/0x1f0
inet_rtx_syn_ack+0x16/0x30
tcp_check_req+0x367/0x610
tcp_rcv_state_process+0x91/0xf60
? get_nohz_timer_target+0x18/0x1a0
? lock_timer_base+0x61/0x80
? preempt_count_add+0x68/0xa0
tcp_v4_do_rcv+0xbd/0x270
__release_sock+0x6d/0xb0
release_sock+0x2b/0x90
sock_setsockopt+0x138/0x1140
? __sys_getsockname+0x7e/0xc0
? aa_sk_perm+0x3e/0x1a0
__sys_setsockopt+0x198/0x1e0
__x64_sys_setsockopt+0x21/0x30
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Laurent Fasnacht <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_output.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 1a5c42c67d42..a231993c81c4 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3795,8 +3795,8 @@ int tcp_rtx_synack(const struct sock *sk, struct request_sock *req)
tcp_rsk(req)->txhash = net_tx_rndhash();
res = af_ops->send_synack(sk, NULL, &fl, req, NULL, TCP_SYNACK_NORMAL);
if (!res) {
- __TCP_INC_STATS(sock_net(sk), TCP_MIB_RETRANSSEGS);
- __NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSYNRETRANS);
+ TCP_INC_STATS(sock_net(sk), TCP_MIB_RETRANSSEGS);
+ NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSYNRETRANS);
if (unlikely(tcp_passive_fastopen(sk)))
tcp_sk(sk)->total_retrans++;
}
--
2.35.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 2dc509305cf956381532792cb8dceef2b1504765 ]
The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to
ensure that it is within the bitmap.
drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept()
error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'
Fixes: 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20220409061225.GA5447@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 6782c3d0c333..e62ed7f42281 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -1005,6 +1005,14 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
goto rx_next;
}
+ if (rxstatus->rs_keyix >= ATH_KEYMAX &&
+ rxstatus->rs_keyix != ATH9K_RXKEYIX_INVALID) {
+ ath_dbg(common, ANY,
+ "Invalid keyix, dropping (keyix: %d)\n",
+ rxstatus->rs_keyix);
+ goto rx_next;
+ }
+
/* Get the RX status information */
memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
--
2.35.1
From: Alexander Aring <[email protected]>
commit 1689c169134f4b5a39156122d799b7dca76d8ddb upstream.
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: [email protected]
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/lock.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -1554,6 +1554,7 @@ static int _remove_from_waiters(struct d
lkb->lkb_wait_type = 0;
lkb->lkb_flags &= ~DLM_IFL_OVERLAP_CANCEL;
lkb->lkb_wait_count--;
+ unhold_lkb(lkb);
goto out_del;
}
@@ -1580,6 +1581,7 @@ static int _remove_from_waiters(struct d
log_error(ls, "remwait error %x reply %d wait_type %d overlap",
lkb->lkb_id, mstype, lkb->lkb_wait_type);
lkb->lkb_wait_count--;
+ unhold_lkb(lkb);
lkb->lkb_wait_type = 0;
}
@@ -5311,11 +5313,16 @@ int dlm_recover_waiters_post(struct dlm_
lkb->lkb_flags &= ~DLM_IFL_OVERLAP_UNLOCK;
lkb->lkb_flags &= ~DLM_IFL_OVERLAP_CANCEL;
lkb->lkb_wait_type = 0;
- lkb->lkb_wait_count = 0;
+ /* drop all wait_count references we still
+ * hold a reference for this iteration.
+ */
+ while (lkb->lkb_wait_count) {
+ lkb->lkb_wait_count--;
+ unhold_lkb(lkb);
+ }
mutex_lock(&ls->ls_waiters_mutex);
list_del_init(&lkb->lkb_wait_reply);
mutex_unlock(&ls->ls_waiters_mutex);
- unhold_lkb(lkb); /* for waiters list */
if (oc || ou) {
/* do an unlock or cancel instead of resending */
From: Jan Kiszka <[email protected]>
[ Upstream commit aa480379d8bdb33920d68acfd90f823c8af32578 ]
Fixes "no previous declaration for 'efi_capsule_setup_info'" warnings
under W=1.
Fixes: 2959c95d510c ("efi/capsule: Add support for Quark security header")
Signed-off-by: Jan Kiszka <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/efi.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 598ee6ba5b18..2c63afd68978 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -150,6 +150,8 @@ struct capsule_info {
size_t page_bytes_remain;
};
+int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
+ size_t hdr_bytes);
int __efi_capsule_setup_info(struct capsule_info *cap_info);
/*
--
2.35.1
From: Zhen Ni <[email protected]>
[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Zhen Ni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/isp116x-hcd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 73fec38754f9..83eb62001679 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1551,10 +1551,12 @@ static int isp116x_remove(struct platform_device *pdev)
iounmap(isp116x->data_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- release_mem_region(res->start, 2);
+ if (res)
+ release_mem_region(res->start, 2);
iounmap(isp116x->addr_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, 2);
+ if (res)
+ release_mem_region(res->start, 2);
usb_put_hcd(hcd);
return 0;
--
2.35.1
From: Vincent Whitchurch <[email protected]>
commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.
syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.
==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1
CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
Call Trace:
show_stack.cold+0x166/0x2a7
__dump_stack+0x3a/0x43
dump_stack_lvl+0x1f/0x27
print_report.cold+0xdb/0xf81
kasan_report+0x119/0x1f0
kasan_check_range+0x3a3/0x440
memcpy+0x52/0x140
syscall_stub_data+0x70/0xe0
write_ldt_entry+0xac/0x190
init_new_ldt+0x515/0x960
init_new_context+0x2c4/0x4d0
mm_init.constprop.0+0x5ed/0x760
mm_alloc+0x118/0x170
0x60033f48
do_one_initcall+0x1d7/0x860
0x60003e7b
kernel_init+0x6e/0x3d4
new_thread_handler+0x1e7/0x2c0
The buggy address belongs to stack of task swapper/1
and is located at offset 64 in frame:
init_new_ldt+0x0/0x960
This frame has 2 objects:
[32, 40) 'addr'
[64, 80) 'desc'
==================================================================
Fixes: 858259cf7d1c443c83 ("uml: maintain own LDT entries")
Signed-off-by: Vincent Whitchurch <[email protected]>
Cc: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/um/ldt.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/um/ldt.c
+++ b/arch/x86/um/ldt.c
@@ -23,9 +23,11 @@ static long write_ldt_entry(struct mm_id
{
long res;
void *stub_addr;
+
+ BUILD_BUG_ON(sizeof(*desc) % sizeof(long));
+
res = syscall_stub_data(mm_idp, (unsigned long *)desc,
- (sizeof(*desc) + sizeof(long) - 1) &
- ~(sizeof(long) - 1),
+ sizeof(*desc) / sizeof(long),
addr, &stub_addr);
if (!res) {
unsigned long args[] = { func,
From: Kees Cook <[email protected]>
[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ]
The nodemask routines had mixed return values that provided potentially
signed return values that could never happen. This was leading to the
compiler getting confusing about the range of possible return values
(it was thinking things could be negative where they could not be). Fix
all the nodemask routines that should be returning unsigned
(or bool) values. Silences:
mm/swapfile.c: In function ‘setup_swap_info’:
mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds]
2291 | p->avail_lists[i].prio = 1;
| ~~~~~~~~~~~~~~^~~
In file included from mm/swapfile.c:16:
./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’
292 | struct plist_node avail_lists[]; /*
| ^~~~~~~~~~~
Reported-by: Christophe de Dinechin <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Alexey Dobriyan <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Zhen Lei <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Yury Norov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/nodemask.h | 38 +++++++++++++++++++-------------------
lib/nodemask.c | 4 ++--
2 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index da9f53586932..13f6248151b9 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -42,11 +42,11 @@
* void nodes_shift_right(dst, src, n) Shift right
* void nodes_shift_left(dst, src, n) Shift left
*
- * int first_node(mask) Number lowest set bit, or MAX_NUMNODES
- * int next_node(node, mask) Next node past 'node', or MAX_NUMNODES
- * int next_node_in(node, mask) Next node past 'node', or wrap to first,
+ * unsigned int first_node(mask) Number lowest set bit, or MAX_NUMNODES
+ * unsigend int next_node(node, mask) Next node past 'node', or MAX_NUMNODES
+ * unsigned int next_node_in(node, mask) Next node past 'node', or wrap to first,
* or MAX_NUMNODES
- * int first_unset_node(mask) First node not set in mask, or
+ * unsigned int first_unset_node(mask) First node not set in mask, or
* MAX_NUMNODES
*
* nodemask_t nodemask_of_node(node) Return nodemask with bit 'node' set
@@ -144,7 +144,7 @@ static inline void __nodes_clear(nodemask_t *dstp, unsigned int nbits)
#define node_test_and_set(node, nodemask) \
__node_test_and_set((node), &(nodemask))
-static inline int __node_test_and_set(int node, nodemask_t *addr)
+static inline bool __node_test_and_set(int node, nodemask_t *addr)
{
return test_and_set_bit(node, addr->bits);
}
@@ -191,7 +191,7 @@ static inline void __nodes_complement(nodemask_t *dstp,
#define nodes_equal(src1, src2) \
__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_equal(const nodemask_t *src1p,
+static inline bool __nodes_equal(const nodemask_t *src1p,
const nodemask_t *src2p, unsigned int nbits)
{
return bitmap_equal(src1p->bits, src2p->bits, nbits);
@@ -199,7 +199,7 @@ static inline int __nodes_equal(const nodemask_t *src1p,
#define nodes_intersects(src1, src2) \
__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_intersects(const nodemask_t *src1p,
+static inline bool __nodes_intersects(const nodemask_t *src1p,
const nodemask_t *src2p, unsigned int nbits)
{
return bitmap_intersects(src1p->bits, src2p->bits, nbits);
@@ -207,20 +207,20 @@ static inline int __nodes_intersects(const nodemask_t *src1p,
#define nodes_subset(src1, src2) \
__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_subset(const nodemask_t *src1p,
+static inline bool __nodes_subset(const nodemask_t *src1p,
const nodemask_t *src2p, unsigned int nbits)
{
return bitmap_subset(src1p->bits, src2p->bits, nbits);
}
#define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
-static inline int __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_empty(const nodemask_t *srcp, unsigned int nbits)
{
return bitmap_empty(srcp->bits, nbits);
}
#define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
-static inline int __nodes_full(const nodemask_t *srcp, unsigned int nbits)
+static inline bool __nodes_full(const nodemask_t *srcp, unsigned int nbits)
{
return bitmap_full(srcp->bits, nbits);
}
@@ -251,15 +251,15 @@ static inline void __nodes_shift_left(nodemask_t *dstp,
> MAX_NUMNODES, then the silly min_ts could be dropped. */
#define first_node(src) __first_node(&(src))
-static inline int __first_node(const nodemask_t *srcp)
+static inline unsigned int __first_node(const nodemask_t *srcp)
{
- return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
+ return min_t(unsigned int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
}
#define next_node(n, src) __next_node((n), &(src))
-static inline int __next_node(int n, const nodemask_t *srcp)
+static inline unsigned int __next_node(int n, const nodemask_t *srcp)
{
- return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
+ return min_t(unsigned int, MAX_NUMNODES, find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
}
/*
@@ -267,7 +267,7 @@ static inline int __next_node(int n, const nodemask_t *srcp)
* the first node in src if needed. Returns MAX_NUMNODES if src is empty.
*/
#define next_node_in(n, src) __next_node_in((n), &(src))
-int __next_node_in(int node, const nodemask_t *srcp);
+unsigned int __next_node_in(int node, const nodemask_t *srcp);
static inline void init_nodemask_of_node(nodemask_t *mask, int node)
{
@@ -287,9 +287,9 @@ static inline void init_nodemask_of_node(nodemask_t *mask, int node)
})
#define first_unset_node(mask) __first_unset_node(&(mask))
-static inline int __first_unset_node(const nodemask_t *maskp)
+static inline unsigned int __first_unset_node(const nodemask_t *maskp)
{
- return min_t(int,MAX_NUMNODES,
+ return min_t(unsigned int, MAX_NUMNODES,
find_first_zero_bit(maskp->bits, MAX_NUMNODES));
}
@@ -425,11 +425,11 @@ static inline int num_node_state(enum node_states state)
#define first_online_node first_node(node_states[N_ONLINE])
#define first_memory_node first_node(node_states[N_MEMORY])
-static inline int next_online_node(int nid)
+static inline unsigned int next_online_node(int nid)
{
return next_node(nid, node_states[N_ONLINE]);
}
-static inline int next_memory_node(int nid)
+static inline unsigned int next_memory_node(int nid)
{
return next_node(nid, node_states[N_MEMORY]);
}
diff --git a/lib/nodemask.c b/lib/nodemask.c
index 3aa454c54c0d..e22647f5181b 100644
--- a/lib/nodemask.c
+++ b/lib/nodemask.c
@@ -3,9 +3,9 @@
#include <linux/module.h>
#include <linux/random.h>
-int __next_node_in(int node, const nodemask_t *srcp)
+unsigned int __next_node_in(int node, const nodemask_t *srcp)
{
- int ret = __next_node(node, srcp);
+ unsigned int ret = __next_node(node, srcp);
if (ret == MAX_NUMNODES)
ret = __first_node(srcp);
--
2.35.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 35b42dce619701f1300fb8498dae82c9bb1f0263 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean)
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio_bus.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7b9480ce21a2..2911648d4669 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -716,7 +716,6 @@ int __init mdio_bus_init(void)
return ret;
}
-EXPORT_SYMBOL_GPL(mdio_bus_init);
#if IS_ENABLED(CONFIG_PHYLIB)
void mdio_bus_exit(void)
--
2.35.1
From: Finn Thain <[email protected]>
[ Upstream commit 86ce436e30d86327c9f5260f718104ae7b21f506 ]
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
make[1]: *** [Makefile:1155: vmlinux] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2
Don't call into the input subsystem unless CONFIG_INPUT is built-in.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/macintosh/Kconfig | 4 ++++
drivers/macintosh/Makefile | 3 ++-
drivers/macintosh/via-pmu.c | 2 +-
3 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 97a420c11eed..5e47d91da519 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -77,6 +77,10 @@ config ADB_PMU
this device; you should do so if your machine is one of those
mentioned above.
+config ADB_PMU_EVENT
+ def_bool y
+ depends on ADB_PMU && INPUT=y
+
config ADB_PMU_LED
bool "Support for the Power/iBook front LED"
depends on ADB_PMU
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index ee803638e595..ff099c7d4edd 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -12,7 +12,8 @@ obj-$(CONFIG_MAC_EMUMOUSEBTN) += mac_hid.o
obj-$(CONFIG_INPUT_ADBHID) += adbhid.o
obj-$(CONFIG_ANSLCD) += ans-lcd.o
-obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o
+obj-$(CONFIG_ADB_PMU) += via-pmu.o
+obj-$(CONFIG_ADB_PMU_EVENT) += via-pmu-event.o
obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o
obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o
obj-$(CONFIG_ADB_CUDA) += via-cuda.o
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f6e040fcad9a..9d6828f49779 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1440,7 +1440,7 @@ pmu_handle_data(unsigned char *data, int len)
pmu_pass_intr(data, len);
/* len == 6 is probably a bad check. But how do I
* know what PMU versions send what events here? */
- if (len == 6) {
+ if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {
via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
via_pmu_event(PMU_EVT_LID, data[1]&1);
}
--
2.35.1
From: Maciej W. Rozycki <[email protected]>
commit 424c3781dd1cb401857585331eaaa425a13f2429 upstream.
Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:
ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'
where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Reported-by: Stephen Zhang <[email protected]>
Fixes: 0ebb2f4159af ("MIPS: IP27: Update/restructure CPU overrides")
Cc: [email protected] # v4.2+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h | 1 -
1 file changed, 1 deletion(-)
--- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -28,7 +28,6 @@
#define cpu_has_6k_cache 0
#define cpu_has_8k_cache 0
#define cpu_has_tx39_cache 0
-#define cpu_has_fpu 1
#define cpu_has_nofpuex 0
#define cpu_has_32fpr 1
#define cpu_has_counter 1
From: Phil Elwell <[email protected]>
[ Upstream commit 2c663e5e5bbf2a5b85e0f76ccb69663f583c3e33 ]
The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
So fix the GPIO line names accordingly.
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Phil Elwell <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 120776d45441..932e0e6320c5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -77,16 +77,18 @@
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
"CAM_GPIO1", /* GPIO40 */
"WL_ON", /* GPIO41 */
"NC", /* GPIO42 */
--
2.35.1
From: Ilpo Järvinen <[email protected]>
[ Upstream commit fd63031b8c0763addcecdefe0e0c59d49646204e ]
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/digicolor-usart.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index 794864fac625..74127813e6db 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -313,6 +313,8 @@ static void digicolor_uart_set_termios(struct uart_port *port,
case CS8:
default:
config |= UA_CONFIG_CHAR_LEN;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
break;
}
--
2.35.1
From: Kwanghoon Son <[email protected]>
[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]
Declare static on function 'fimc_isp_video_device_unregister'.
When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about
warning: no previous prototype for function [-Wmissing-prototypes]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Kwanghoon Son <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h
index f79a1b348aa6..67ef85249912 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.h
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h
@@ -35,7 +35,7 @@ static inline int fimc_isp_video_device_register(struct fimc_isp *isp,
return 0;
}
-void fimc_isp_video_device_unregister(struct fimc_isp *isp,
+static inline void fimc_isp_video_device_unregister(struct fimc_isp *isp,
enum v4l2_buf_type type)
{
}
--
2.35.1
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ]
Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.
Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().
Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/sh-sci.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 21f81dc08139..f7dd843a3eff 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2267,8 +2267,12 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long max_freq = 0;
int best_clk = -1;
- if ((termios->c_cflag & CSIZE) == CS7)
+ if ((termios->c_cflag & CSIZE) == CS7) {
smr_val |= SCSMR_CHR;
+ } else {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ }
if (termios->c_cflag & PARENB)
smr_val |= SCSMR_PE;
if (termios->c_cflag & PARODD)
--
2.35.1
From: Niels Dossche <[email protected]>
[ Upstream commit 3e12968f6d12a34b540c39cbd696a760cc4616f0 ]
cfg80211_ch_switch_notify uses ASSERT_WDEV_LOCK to assert that
net_device->ieee80211_ptr->mtx (which is the same as priv->wdev.mtx)
is held during the function's execution.
mwifiex_dfs_chan_sw_work_queue is one of its callers, which does not
hold that lock, therefore violating the assertion.
Add a lock around the call.
Disclaimer:
I am currently working on a static analyser to detect missing locks.
This was a reported case. I manually verified the report by looking
at the code, so that I do not send wrong information or patches.
After concluding that this seems to be a true positive, I created
this patch.
However, as I do not in fact have this particular hardware,
I was unable to test it.
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Niels Dossche <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/11h.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/11h.c b/drivers/net/wireless/marvell/mwifiex/11h.c
index 238accfe4f41..c4176e357b22 100644
--- a/drivers/net/wireless/marvell/mwifiex/11h.c
+++ b/drivers/net/wireless/marvell/mwifiex/11h.c
@@ -303,5 +303,7 @@ void mwifiex_dfs_chan_sw_work_queue(struct work_struct *work)
mwifiex_dbg(priv->adapter, MSG,
"indicating channel switch completion to kernel\n");
+ mutex_lock(&priv->wdev.mtx);
cfg80211_ch_switch_notify(priv->netdev, &priv->dfs_chandef);
+ mutex_unlock(&priv->wdev.mtx);
}
--
2.35.1
From: Brian Norris <[email protected]>
commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream.
If the display is not enable()d, then we aren't holding a runtime PM
reference here. Thus, it's easy to accidentally cause a hang, if user
space is poking around at /dev/drm_dp_aux0 at the "wrong" time.
Let's get a runtime PM reference, and check that we "see" the panel.
Don't force any panel power-up, etc., because that can be intrusive, and
that's not what other drivers do (see
drivers/gpu/drm/bridge/ti-sn65dsi86.c and
drivers/gpu/drm/bridge/parade-ps8640.c.)
Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code")
Cc: <[email protected]>
Cc: Tomeu Vizoso <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1279,8 +1279,19 @@ static ssize_t analogix_dpaux_transfer(s
struct drm_dp_aux_msg *msg)
{
struct analogix_dp_device *dp = to_dp(aux);
+ int ret;
- return analogix_dp_transfer(dp, msg);
+ pm_runtime_get_sync(dp->dev);
+
+ ret = analogix_dp_detect_hpd(dp);
+ if (ret)
+ goto out;
+
+ ret = analogix_dp_transfer(dp, msg);
+out:
+ pm_runtime_put(dp->dev);
+
+ return ret;
}
int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
From: Mark Brown <[email protected]>
commit 4213ff556740bb45e2d9ff0f50d056c4e7dd0921 upstream.
The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/rt5514.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/codecs/rt5514.c
+++ b/sound/soc/codecs/rt5514.c
@@ -352,7 +352,7 @@ static int rt5514_dsp_voice_wake_up_put(
}
}
- return 0;
+ return 1;
}
static const struct snd_kcontrol_new rt5514_snd_controls[] = {
From: Miles Chen <[email protected]>
[ Upstream commit 2c5d69b0a141e1e98febe3111e6f4fd8420493a5 ]
In current implementation, mtk_cec_mask() writes val into target register
and ignores the mask. After talking to our hdmi experts, mtk_cec_mask()
should read a register, clean only mask bits, and update (val | mask) bits
to the register.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Miles Chen <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Cc: Zhiqiang Lin <[email protected]>
Cc: CK Hu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_cec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_cec.c b/drivers/gpu/drm/mediatek/mtk_cec.c
index 7a3eb8c17ef9..4e5482986dc2 100644
--- a/drivers/gpu/drm/mediatek/mtk_cec.c
+++ b/drivers/gpu/drm/mediatek/mtk_cec.c
@@ -91,7 +91,7 @@ static void mtk_cec_mask(struct mtk_cec *cec, unsigned int offset,
u32 tmp = readl(cec->regs + offset) & ~mask;
tmp |= val & mask;
- writel(val, cec->regs + offset);
+ writel(tmp, cec->regs + offset);
}
void mtk_cec_set_hpd_event(struct device *dev,
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit fcee96924ba1596ca80a6770b2567ca546f9a482 ]
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/fsl_rio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 5011ffea4e4b..c48ebe677962 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -509,8 +509,10 @@ int fsl_rio_setup(struct platform_device *dev)
if (rc) {
dev_err(&dev->dev, "Can't get %pOF property 'reg'\n",
rmu_node);
+ of_node_put(rmu_node);
goto err_rmu;
}
+ of_node_put(rmu_node);
rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
if (!rmu_regs_win) {
dev_err(&dev->dev, "Unable to map rmu register window\n");
--
2.35.1
From: Kirill A. Shutemov <[email protected]>
[ Upstream commit e2efb6359e620521d1e13f69b2257de8ceaa9475 ]
While running inside virtual machine, the kernel can bypass cache
flushing. Changing sleep state in a virtual machine doesn't affect the
host system sleep state and cannot lead to data loss.
Before entering sleep states, the ACPI code flushes caches to prevent
data loss using the WBINVD instruction. This mechanism is required on
bare metal.
But, any use WBINVD inside of a guest is worthless. Changing sleep
state in a virtual machine doesn't affect the host system sleep state
and cannot lead to data loss, so most hypervisors simply ignore it.
Despite this, the ACPI code calls WBINVD unconditionally anyway.
It's useless, but also normally harmless.
In TDX guests, though, WBINVD stops being harmless; it triggers a
virtualization exception (#VE). If the ACPI cache-flushing WBINVD
were left in place, TDX guests would need handling to recover from
the exception.
Avoid using WBINVD whenever running under a hypervisor. This both
removes the useless WBINVDs and saves TDX from implementing WBINVD
handling.
Signed-off-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Dave Hansen <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/acenv.h | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/acenv.h b/arch/x86/include/asm/acenv.h
index 1b010a859b8b..6de59a4f723c 100644
--- a/arch/x86/include/asm/acenv.h
+++ b/arch/x86/include/asm/acenv.h
@@ -16,7 +16,19 @@
/* Asm macros */
-#define ACPI_FLUSH_CPU_CACHE() wbinvd()
+/*
+ * ACPI_FLUSH_CPU_CACHE() flushes caches on entering sleep states.
+ * It is required to prevent data loss.
+ *
+ * While running inside virtual machine, the kernel can bypass cache flushing.
+ * Changing sleep state in a virtual machine doesn't affect the host system
+ * sleep state and cannot lead to data loss.
+ */
+#define ACPI_FLUSH_CPU_CACHE() \
+do { \
+ if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) \
+ wbinvd(); \
+} while (0)
int __acpi_acquire_global_lock(unsigned int *lock);
int __acpi_release_global_lock(unsigned int *lock);
--
2.35.1
From: Johannes Berg <[email protected]>
commit 57ae0b67b747031bc41fb44643aa5344ab58607e upstream.
The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).
As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.
Fix that and make it more obvious by using a separate
variable for the pid.
Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()")
Reported-and-tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Cc: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/drivers/chan_user.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -220,7 +220,7 @@ static int winch_tramp(int fd, struct tt
unsigned long *stack_out)
{
struct winch_data data;
- int fds[2], n, err;
+ int fds[2], n, err, pid;
char c;
err = os_pipe(fds, 1, 1);
@@ -238,8 +238,9 @@ static int winch_tramp(int fd, struct tt
* problem with /dev/net/tun, which if held open by this
* thread, prevents the TUN/TAP device from being reused.
*/
- err = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out);
- if (err < 0) {
+ pid = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out);
+ if (pid < 0) {
+ err = pid;
printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n",
-err);
goto out_close;
@@ -263,7 +264,7 @@ static int winch_tramp(int fd, struct tt
goto out_close;
}
- return err;
+ return pid;
out_close:
close(fds[1]);
From: Shuah Khan <[email protected]>
[ Upstream commit f861d36e021e1ac4a0a2a1f6411d623809975d63 ]
rtsx_usb_probe() doesn't call usb_set_intfdata() to null out the
interface pointer when probe fails. This leaves a stale pointer.
Noticed the missing usb_set_intfdata() while debugging an unrelated
invalid DMA mapping problem.
Fix it with a call to usb_set_intfdata(..., NULL).
Signed-off-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/rtsx_usb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index 691dab791f7a..e94f855eac15 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -678,6 +678,7 @@ static int rtsx_usb_probe(struct usb_interface *intf,
return 0;
out_init_fail:
+ usb_set_intfdata(ucr->pusb_intf, NULL);
usb_free_coherent(ucr->pusb_dev, IOBUF_SIZE, ucr->iobuf,
ucr->iobuf_dma);
return ret;
--
2.35.1
From: Lv Ruyi <[email protected]>
[ Upstream commit 3b49ae380ce1a3054e0c505dd9a356b82a5b48e8 ]
platform_get_irq() return negative value on failure, so null check of
irq is incorrect. Fix it by comparing whether it is less than zero.
Fixes: dcc21cc09e3c ("mfd: Add driver for Atmel Microcontroller on iPaq h3xxx")
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Lv Ruyi <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/ipaq-micro.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
index cd762d08f116..2ba0e2d575c0 100644
--- a/drivers/mfd/ipaq-micro.c
+++ b/drivers/mfd/ipaq-micro.c
@@ -410,7 +410,7 @@ static int __init micro_probe(struct platform_device *pdev)
micro_reset_comm(micro);
irq = platform_get_irq(pdev, 0);
- if (!irq)
+ if (irq < 0)
return -EINVAL;
ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
IRQF_SHARED, "ipaq-micro",
--
2.35.1
From: Dan Carpenter <[email protected]>
[ Upstream commit e7e7104e2d5ddf3806a28695670f21bef471f1e1 ]
The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.
Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index dbd16dd5aa04..ade72b46e93c 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1579,6 +1579,9 @@ static int mtk_hwlro_get_fdir_entry(struct net_device *dev,
struct ethtool_rx_flow_spec *fsp =
(struct ethtool_rx_flow_spec *)&cmd->fs;
+ if (fsp->location >= ARRAY_SIZE(mac->hwlro_ip))
+ return -EINVAL;
+
/* only tcp dst ipv4 is meaningful, others are meaningless */
fsp->flow_type = TCP_V4_FLOW;
fsp->h_u.tcp_ip4_spec.ip4dst = ntohl(mac->hwlro_ip[fsp->location]);
--
2.35.1
From: Matthieu Baerts <[email protected]>
[ Upstream commit b0b592cf08367719e1d1ef07c9f136e8c17f7ec3 ]
Since
e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
kmemleak reports this issue:
unreferenced object 0xffff888009cedc00 (size 256):
comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
msr_build_context (include/linux/slab.h:621)
pm_check_save_msr (arch/x86/power/cpu.c:520)
do_one_initcall (init/main.c:1298)
kernel_init_freeable (init/main.c:1370)
kernel_init (init/main.c:1504)
ret_from_fork (arch/x86/entry/entry_64.S:304)
Reproducer:
- boot the VM with a debug kernel config (see
https://github.com/multipath-tcp/mptcp_net-next/issues/268)
- wait ~1 minute
- start a kmemleak scan
The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:
struct saved_context {
struct pt_regs regs; /* 0 168 */
/* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
u16 ds; /* 168 2 */
...
u64 misc_enable; /* 232 8 */
bool misc_enable_saved; /* 240 1 */
/* Note below odd offset values for the remainder of this struct */
struct saved_msrs saved_msrs; /* 241 16 */
/* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
long unsigned int efer; /* 257 8 */
u16 gdt_pad; /* 265 2 */
struct desc_ptr gdt_desc; /* 267 10 */
u16 idt_pad; /* 277 2 */
struct desc_ptr idt; /* 279 10 */
u16 ldt; /* 289 2 */
u16 tss; /* 291 2 */
long unsigned int tr; /* 293 8 */
long unsigned int safety; /* 301 8 */
long unsigned int return_address; /* 309 8 */
/* size: 317, cachelines: 5, members: 25 */
/* last cacheline: 61 bytes */
} __attribute__((__packed__));
Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.
The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.
At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.
Please note that it looks like this issue is not new, e.g.
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/[email protected]/
[ bp: Massage + cleanup commit message. ]
Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/suspend_32.h | 2 +-
arch/x86/include/asm/suspend_64.h | 12 ++++++++----
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index 8be6afb58471..32662cbaa27e 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -21,7 +21,6 @@ struct saved_context {
#endif
unsigned long cr0, cr2, cr3, cr4;
u64 misc_enable;
- bool misc_enable_saved;
struct saved_msrs saved_msrs;
struct desc_ptr gdt_desc;
struct desc_ptr idt;
@@ -30,6 +29,7 @@ struct saved_context {
unsigned long tr;
unsigned long safety;
unsigned long return_address;
+ bool misc_enable_saved;
} __attribute__((packed));
#endif /* _ASM_X86_SUSPEND_32_H */
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index a7af9f53c0cb..b2861400c6a2 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -14,9 +14,13 @@
* Image of the saved processor state, used by the low level ACPI suspend to
* RAM code and by the low level hibernation code.
*
- * If you modify it, fix arch/x86/kernel/acpi/wakeup_64.S and make sure that
- * __save/__restore_processor_state(), defined in arch/x86/kernel/suspend_64.c,
- * still work as required.
+ * If you modify it, check how it is used in arch/x86/kernel/acpi/wakeup_64.S
+ * and make sure that __save/__restore_processor_state(), defined in
+ * arch/x86/power/cpu.c, still work as required.
+ *
+ * Because the structure is packed, make sure to avoid unaligned members. For
+ * optimisation purposes but also because tools like kmemleak only search for
+ * pointers that are aligned.
*/
struct saved_context {
struct pt_regs regs;
@@ -36,7 +40,6 @@ struct saved_context {
unsigned long cr0, cr2, cr3, cr4, cr8;
u64 misc_enable;
- bool misc_enable_saved;
struct saved_msrs saved_msrs;
unsigned long efer;
u16 gdt_pad; /* Unused */
@@ -48,6 +51,7 @@ struct saved_context {
unsigned long tr;
unsigned long safety;
unsigned long return_address;
+ bool misc_enable_saved;
} __attribute__((packed));
#define loaddebug(thread,register) \
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 11ec18b1d8d92b9df307d31950dcba0b3dd7283c ]
Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/altera/altera_tse_main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 691fd194e5ea..1c0f11ec7a83 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -174,7 +174,8 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
mdio = mdiobus_alloc();
if (mdio == NULL) {
netdev_err(dev, "Error allocating MDIO bus\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto put_node;
}
mdio->name = ALTERA_TSE_RESOURCE_NAME;
@@ -191,6 +192,7 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
mdio->id);
goto out_free_mdio;
}
+ of_node_put(mdio_node);
if (netif_msg_drv(priv))
netdev_info(dev, "MDIO bus %s: created\n", mdio->id);
@@ -200,6 +202,8 @@ static int altera_tse_mdio_create(struct net_device *dev, unsigned int id)
out_free_mdio:
mdiobus_free(mdio);
mdio = NULL;
+put_node:
+ of_node_put(mdio_node);
return ret;
}
--
2.35.1
From: Christophe de Dinechin <[email protected]>
commit 37462a920392cb86541650a6f4121155f11f1199 upstream.
With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:
| CC mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
| of `struct plist_node[]' [-Werror=array-bounds]
| 2291 | p->avail_lists[i].prio = 1;
| | ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
| 292 | struct plist_node avail_lists[]; /*
| | ^~~~~~~~~~~
This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.
I believe that the warning/error is legitimate. I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.
However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.
This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test. Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop. It will still only be tested once. This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Christophe de Dinechin <[email protected]>
Signed-off-by: Christophe de Dinechin <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Ben Segall <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Dietmar Eggemann <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Daniel Bristot de Oliveira <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Zhen Lei <[email protected]>
Cc: Juri Lelli <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/nodemask.h | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -366,14 +366,13 @@ static inline void __nodes_fold(nodemask
}
#if MAX_NUMNODES > 1
-#define for_each_node_mask(node, mask) \
- for ((node) = first_node(mask); \
- (node) < MAX_NUMNODES; \
- (node) = next_node((node), (mask)))
+#define for_each_node_mask(node, mask) \
+ for ((node) = first_node(mask); \
+ (node >= 0) && (node) < MAX_NUMNODES; \
+ (node) = next_node((node), (mask)))
#else /* MAX_NUMNODES == 1 */
-#define for_each_node_mask(node, mask) \
- if (!nodes_empty(mask)) \
- for ((node) = 0; (node) < 1; (node)++)
+#define for_each_node_mask(node, mask) \
+ for ((node) = 0; (node) < 1 && !nodes_empty(mask); (node)++)
#endif /* MAX_NUMNODES */
/*
From: Zheng Yongjun <[email protected]>
[ Upstream commit cc470d55343056d6b2a5c32e10e0aad06f324078 ]
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes: deba25800a12b ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zheng Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-img-spfi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 2a340234c85c..82ab1bc2196a 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -771,7 +771,7 @@ static int img_spfi_resume(struct device *dev)
int ret;
ret = pm_runtime_get_sync(dev);
- if (ret) {
+ if (ret < 0) {
pm_runtime_put_noidle(dev);
return ret;
}
--
2.35.1
From: Baokun Li <[email protected]>
[ Upstream commit c14adb1cf70a984ed081c67e9d27bc3caad9537c ]
If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns
an error, we can observe the following kmemleak report:
--------------------------------------------
unreferenced object 0xffff888105a65340 (size 64):
comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0
[<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0
[<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
[<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
[<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
[...]
unreferenced object 0xffff8881bd7f0000 (size 65536):
comm "mount", pid 710, jiffies 4302851558 (age 58.239s)
hex dump (first 32 bytes):
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
backtrace:
[<ffffffff858579ba>] kmalloc_order+0xda/0x110
[<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130
[<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0
[<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0
[<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120
[<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810
[<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0
[...]
--------------------------------------------
This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jffs2/fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index b7df9e34ccfd..dd7c6fbd2cc5 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -598,6 +598,7 @@ int jffs2_do_fill_super(struct super_block *sb, void *data, int silent)
jffs2_free_raw_node_refs(c);
kvfree(c->blocks);
jffs2_clear_xattr_subsystem(c);
+ jffs2_sum_exit(c);
out_inohash:
kfree(c->inocache_list);
out_wbuf:
--
2.35.1
From: John Ogness <[email protected]>
[ Upstream commit aabdbb1b7a5819e18c403334a31fb0cc2c06ad41 ]
__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.
Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.
Reported-by: Marek Szyprowski <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/msm_serial.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 7848e9455950..3df3716caa56 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1587,6 +1587,7 @@ static inline struct uart_port *msm_get_port_from_line(unsigned int line)
static void __msm_console_write(struct uart_port *port, const char *s,
unsigned int count, bool is_uartdm)
{
+ unsigned long flags;
int i;
int num_newlines = 0;
bool replaced = false;
@@ -1604,6 +1605,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
num_newlines++;
count += num_newlines;
+ local_irq_save(flags);
+
if (port->sysrq)
locked = 0;
else if (oops_in_progress)
@@ -1649,6 +1652,8 @@ static void __msm_console_write(struct uart_port *port, const char *s,
if (locked)
spin_unlock(&port->lock);
+
+ local_irq_restore(flags);
}
static void msm_console_write(struct console *co, const char *s,
--
2.35.1
From: Miaohe Lin <[email protected]>
[ Upstream commit da63dc84befaa9e6079a0bc363ff0eaa975f9073 ]
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node to fix
this issue.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Cc: KOSAKI Motohiro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/node.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 5c39f14d15a5..57eef6b24448 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -337,6 +337,7 @@ static int register_node(struct node *node, int num)
*/
void unregister_node(struct node *node)
{
+ compaction_unregister_node(node);
hugetlb_unregister_node(node); /* no-op, if memoryless node */
device_unregister(&node->dev);
--
2.35.1
From: Lv Ruyi <[email protected]>
[ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Lv Ruyi <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/xics/icp-opal.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c
index c71d2ea42627..3c9dd871491e 100644
--- a/arch/powerpc/sysdev/xics/icp-opal.c
+++ b/arch/powerpc/sysdev/xics/icp-opal.c
@@ -199,6 +199,7 @@ int icp_opal_init(void)
printk("XICS: Using OPAL ICP fallbacks\n");
+ of_node_put(np);
return 0;
}
--
2.35.1
From: Zhihao Cheng <[email protected]>
[ Upstream commit 8c03a1c21d72210f81cb369cc528e3fde4b45411 ]
There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s
error handling path:
ubi_eba_replace_table(vol, eba_tbl)
vol->eba_tbl = tbl
out_mapping:
ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl'
out_unlock:
put_device(&vol->dev)
vol_release
kfree(tbl->entries) // UAF
Fix it by removing redundant 'eba_tbl' releasing.
Fetch a reproducer in [Link].
Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/ubi/vmt.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 8f641448a97a..d32144c0098a 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -315,7 +315,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
ubi->volumes[vol_id] = NULL;
ubi->vol_count -= 1;
spin_unlock(&ubi->volumes_lock);
- ubi_eba_destroy_table(eba_tbl);
out_acc:
spin_lock(&ubi->volumes_lock);
ubi->rsvd_pebs -= vol->reserved_pebs;
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ]
of_find_node_by_path() calls of_find_node_opts_by_path(),
which returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/misc/sparcspkr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index 4a5afc7fe96e..f6e1f38267d9 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -204,6 +204,7 @@ static int bbc_beep_probe(struct platform_device *op)
info = &state->u.bbc;
info->clock_freq = of_getintprop_default(dp, "clock-frequency", 0);
+ of_node_put(dp);
if (!info->clock_freq)
goto out_free;
--
2.35.1
From: Yu Kuai <[email protected]>
[ Upstream commit 09dadb5985023e27d4740ebd17e6fea4640110e5 ]
In our tests, "qemu-nbd" triggers a io hung:
INFO: task qemu-nbd:11445 blocked for more than 368 seconds.
Not tainted 5.18.0-rc3-next-20220422-00003-g2176915513ca #884
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:qemu-nbd state:D stack: 0 pid:11445 ppid: 1 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x480/0x1050
? _raw_spin_lock_irqsave+0x3e/0xb0
schedule+0x9c/0x1b0
blk_mq_freeze_queue_wait+0x9d/0xf0
? ipi_rseq+0x70/0x70
blk_mq_freeze_queue+0x2b/0x40
nbd_add_socket+0x6b/0x270 [nbd]
nbd_ioctl+0x383/0x510 [nbd]
blkdev_ioctl+0x18e/0x3e0
__x64_sys_ioctl+0xac/0x120
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fd8ff706577
RSP: 002b:00007fd8fcdfebf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000040000000 RCX: 00007fd8ff706577
RDX: 000000000000000d RSI: 000000000000ab00 RDI: 000000000000000f
RBP: 000000000000000f R08: 000000000000fbe8 R09: 000055fe497c62b0
R10: 00000002aff20000 R11: 0000000000000246 R12: 000000000000006d
R13: 0000000000000000 R14: 00007ffe82dc5e70 R15: 00007fd8fcdff9c0
"qemu-ndb -d" will call ioctl 'NBD_DISCONNECT' first, however, following
message was found:
block nbd0: Send disconnect failed -32
Which indicate that something is wrong with the server. Then,
"qemu-nbd -d" will call ioctl 'NBD_CLEAR_SOCK', however ioctl can't clear
requests after commit 2516ab1543fd("nbd: only clear the queue on device
teardown"). And in the meantime, request can't complete through timeout
because nbd_xmit_timeout() will always return 'BLK_EH_RESET_TIMER', which
means such request will never be completed in this situation.
Now that the flag 'NBD_CMD_INFLIGHT' can make sure requests won't
complete multiple times, switch back to call nbd_clear_sock() in
nbd_clear_sock_ioctl(), so that inflight requests can be cleared.
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/nbd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 9596f93d98b2..338d02a67afb 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1275,7 +1275,7 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *b
static void nbd_clear_sock_ioctl(struct nbd_device *nbd,
struct block_device *bdev)
{
- sock_shutdown(nbd);
+ nbd_clear_sock(nbd);
__invalidate_device(bdev, true);
nbd_bdev_reset(bdev);
if (test_and_clear_bit(NBD_HAS_CONFIG_REF,
--
2.35.1
From: Alexander Aring <[email protected]>
commit 42252d0d2aa9b94d168241710a761588b3959019 upstream.
This patch fixes an invalid read showed by KASAN. A unlock will allocate a
"struct plock_op" and a followed send_op() will append it to a global
send_list data structure. In some cases a followed dev_read() moves it
to recv_list and dev_write() will cast it to "struct plock_xop" and access
fields which are only available in those structures. At this point an
invalid read happens by accessing those fields.
To fix this issue the "callback" field is moved to "struct plock_op" to
indicate that a cast to "plock_xop" is allowed and does the additional
"plock_xop" handling if set.
Example of the KASAN output which showed the invalid read:
[ 2064.296453] ==================================================================
[ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm]
[ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484
[ 2064.308168]
[ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9
[ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 2064.311618] Call Trace:
[ 2064.312218] dump_stack_lvl+0x56/0x7b
[ 2064.313150] print_address_description.constprop.8+0x21/0x150
[ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.316595] kasan_report.cold.14+0x7f/0x11b
[ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.318687] dev_write+0x52b/0x5a0 [dlm]
[ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm]
[ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10
[ 2064.321926] vfs_write+0x17e/0x930
[ 2064.322769] ? __fget_light+0x1aa/0x220
[ 2064.323753] ksys_write+0xf1/0x1c0
[ 2064.324548] ? __ia32_sys_read+0xb0/0xb0
[ 2064.325464] do_syscall_64+0x3a/0x80
[ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.327606] RIP: 0033:0x7f807e4ba96f
[ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48
[ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f
[ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010
[ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001
[ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80
[ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001
[ 2064.342857]
[ 2064.343226] Allocated by task 12438:
[ 2064.344057] kasan_save_stack+0x1c/0x40
[ 2064.345079] __kasan_kmalloc+0x84/0xa0
[ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220
[ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm]
[ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0
[ 2064.351070] fcntl_setlk+0x281/0xbc0
[ 2064.352879] do_fcntl+0x5e4/0xfe0
[ 2064.354657] __x64_sys_fcntl+0x11f/0x170
[ 2064.356550] do_syscall_64+0x3a/0x80
[ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.360745]
[ 2064.361511] Last potentially related work creation:
[ 2064.363957] kasan_save_stack+0x1c/0x40
[ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.368100] call_rcu+0x11b/0xf70
[ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.372404] receive_from_sock+0x290/0x770 [dlm]
[ 2064.374607] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.377290] process_one_work+0x9a8/0x16e0
[ 2064.379357] worker_thread+0x87/0xbf0
[ 2064.381188] kthread+0x3ac/0x490
[ 2064.383460] ret_from_fork+0x22/0x30
[ 2064.385588]
[ 2064.386518] Second to last potentially related work creation:
[ 2064.389219] kasan_save_stack+0x1c/0x40
[ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.393303] call_rcu+0x11b/0xf70
[ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.397694] receive_from_sock+0x290/0x770 [dlm]
[ 2064.399932] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.402180] process_one_work+0x9a8/0x16e0
[ 2064.404388] worker_thread+0x87/0xbf0
[ 2064.406124] kthread+0x3ac/0x490
[ 2064.408021] ret_from_fork+0x22/0x30
[ 2064.409834]
[ 2064.410599] The buggy address belongs to the object at ffff88800ef22780
[ 2064.410599] which belongs to the cache kmalloc-96 of size 96
[ 2064.416495] The buggy address is located 88 bytes inside of
[ 2064.416495] 96-byte region [ffff88800ef22780, ffff88800ef227e0)
[ 2064.422045] The buggy address belongs to the page:
[ 2064.424635] page:00000000b6bef8bc refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xef22
[ 2064.428970] flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff)
[ 2064.432515] raw: 000fffffc0000200 ffffea0000d68b80 0000001400000014 ffff888001041780
[ 2064.436110] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 2064.439813] page dumped because: kasan: bad access detected
[ 2064.442548]
[ 2064.443310] Memory state around the buggy address:
[ 2064.445988] ffff88800ef22680: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.449444] ffff88800ef22700: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.452941] >ffff88800ef22780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
[ 2064.456383] ^
[ 2064.459386] ffff88800ef22800: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
[ 2064.462788] ffff88800ef22880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.466239] ==================================================================
reproducer in python:
import argparse
import struct
import fcntl
import os
parser = argparse.ArgumentParser()
parser.add_argument('-f', '--file',
help='file to use fcntl, must be on dlm lock filesystem e.g. gfs2')
args = parser.parse_args()
f = open(args.file, 'wb+')
lockdata = struct.pack('hhllhh', fcntl.F_WRLCK,0,0,0,0,0)
fcntl.fcntl(f, fcntl.F_SETLK, lockdata)
lockdata = struct.pack('hhllhh', fcntl.F_UNLCK,0,0,0,0,0)
fcntl.fcntl(f, fcntl.F_SETLK, lockdata)
Fixes: 586759f03e2e ("gfs2: nfs lock support for gfs2")
Cc: [email protected]
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/dlm/plock.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -26,11 +26,11 @@ struct plock_op {
struct list_head list;
int done;
struct dlm_plock_info info;
+ int (*callback)(struct file_lock *fl, int result);
};
struct plock_xop {
struct plock_op xop;
- int (*callback)(struct file_lock *fl, int result);
void *fl;
void *file;
struct file_lock flc;
@@ -132,19 +132,18 @@ int dlm_posix_lock(dlm_lockspace_t *lock
/* fl_owner is lockd which doesn't distinguish
processes on the nfs client */
op->info.owner = (__u64) fl->fl_pid;
- xop->callback = fl->fl_lmops->lm_grant;
+ op->callback = fl->fl_lmops->lm_grant;
locks_init_lock(&xop->flc);
locks_copy_lock(&xop->flc, fl);
xop->fl = fl;
xop->file = file;
} else {
op->info.owner = (__u64)(long) fl->fl_owner;
- xop->callback = NULL;
}
send_op(op);
- if (xop->callback == NULL) {
+ if (!op->callback) {
rv = wait_event_interruptible(recv_wq, (op->done != 0));
if (rv == -ERESTARTSYS) {
log_debug(ls, "dlm_posix_lock: wait killed %llx",
@@ -206,7 +205,7 @@ static int dlm_plock_callback(struct plo
file = xop->file;
flc = &xop->flc;
fl = xop->fl;
- notify = xop->callback;
+ notify = op->callback;
if (op->info.rv) {
notify(fl, op->info.rv);
@@ -439,10 +438,9 @@ static ssize_t dev_write(struct file *fi
if (op->info.fsid == info.fsid &&
op->info.number == info.number &&
op->info.owner == info.owner) {
- struct plock_xop *xop = (struct plock_xop *)op;
list_del_init(&op->list);
memcpy(&op->info, &info, sizeof(info));
- if (xop->callback)
+ if (op->callback)
do_callback = 1;
else
op->done = 1;
From: Jakub Kicinski <[email protected]>
[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]
GCC 12 currently generates a rather inconsistent warning:
drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds]
17795 | struct tg3_napi *tnapi = &tp->napi[i];
| ~~~~~~~~^~~
i is guaranteed < tp->irq_max which in turn is either 1 or 5.
There are more loops like this one in the driver, but strangely
GCC 12 dislikes only this single one.
Silence this silliness for now.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/Makefile | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
index 7046ad6d3d0e..ac50da49ca77 100644
--- a/drivers/net/ethernet/broadcom/Makefile
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -16,3 +16,8 @@ obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o
obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o
obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o
obj-$(CONFIG_BNXT) += bnxt/
+
+# FIXME: temporarily silence -Warray-bounds on non W=1+ builds
+ifndef KBUILD_EXTRA_WARN
+CFLAGS_tg3.o += -Wno-array-bounds
+endif
--
2.35.1
From: Ye Bin <[email protected]>
commit 0be698ecbe4471fcad80e81ec6a05001421041b3 upstream.
We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478
ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000
ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae
==================================================================
BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220
Read of size 4 at addr ffff88810beee6ae by task rep/1895
CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241
Call Trace:
dump_stack+0xbe/0xf9
print_address_description.constprop.0+0x1e/0x220
kasan_report.cold+0x37/0x7f
ext4_rename_dir_prepare+0x152/0x220
ext4_rename+0xf44/0x1ad0
ext4_rename2+0x11c/0x170
vfs_rename+0xa84/0x1440
do_renameat2+0x683/0x8f0
__x64_sys_renameat+0x53/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f45a6fc41c9
RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9
RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005
RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080
R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0
R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000
The buggy address belongs to the page:
page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee
flags: 0x200000000000000()
raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
ext4_rename_dir_prepare: [2] parent_de->inode=3537895424
ext4_rename_dir_prepare: [3] dir=0xffff888124170140
ext4_rename_dir_prepare: [4] ino=2
ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872
Reason is first directory entry which 'rec_len' is 34478, then will get illegal
parent entry. Now, we do not check directory entry after read directory block
in 'ext4_get_first_dir_block'.
To solve this issue, check directory entry in 'ext4_get_first_dir_block'.
[ Trigger an ext4_error() instead of just warning if the directory is
missing a '.' or '..' entry. Also make sure we return an error code
if the file system is corrupted. -TYT ]
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3338,6 +3338,9 @@ static struct buffer_head *ext4_get_firs
struct buffer_head *bh;
if (!ext4_has_inline_data(inode)) {
+ struct ext4_dir_entry_2 *de;
+ unsigned int offset;
+
/* The first directory block must not be a hole, so
* treat it as DIRENT_HTREE
*/
@@ -3346,9 +3349,30 @@ static struct buffer_head *ext4_get_firs
*retval = PTR_ERR(bh);
return NULL;
}
- *parent_de = ext4_next_entry(
- (struct ext4_dir_entry_2 *)bh->b_data,
- inode->i_sb->s_blocksize);
+
+ de = (struct ext4_dir_entry_2 *) bh->b_data;
+ if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data,
+ bh->b_size, 0) ||
+ le32_to_cpu(de->inode) != inode->i_ino ||
+ strcmp(".", de->name)) {
+ EXT4_ERROR_INODE(inode, "directory missing '.'");
+ brelse(bh);
+ *retval = -EFSCORRUPTED;
+ return NULL;
+ }
+ offset = ext4_rec_len_from_disk(de->rec_len,
+ inode->i_sb->s_blocksize);
+ de = ext4_next_entry(de, inode->i_sb->s_blocksize);
+ if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data,
+ bh->b_size, offset) ||
+ le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) {
+ EXT4_ERROR_INODE(inode, "directory missing '..'");
+ brelse(bh);
+ *retval = -EFSCORRUPTED;
+ return NULL;
+ }
+ *parent_de = de;
+
return bh;
}
From: Haowen Bai <[email protected]>
[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]
crypt and crypt->ops could be null, so we need to checking null
before dereference
Signed-off-by: Haowen Bai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
index 84205aa508df..daa4f9eb08ff 100644
--- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c
@@ -397,7 +397,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
/* Each fragment may need to have room for encryption
* pre/postfix */
- if (host_encrypt)
+ if (host_encrypt && crypt && crypt->ops)
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
crypt->ops->extra_mpdu_postfix_len;
--
2.35.1
From: Carl Yin(殷张成) <[email protected]>
commit 33b7af2f459df453feb0d44628d820c47fefe7a8 upstream.
The BG95 modem has 3 USB configurations that are configurable via the AT
command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem
enumerate with the following interfaces, respectively:
"modem": Diag + GNSS + Modem + Modem
"ecm" : Diag + GNSS + Modem + ECM
"rmnet": Diag + GNSS + Modem + QMI
Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE)
A detailed description of the USB configuration for each mode follows:
+QCFGEXT: "usbnet","modem"
--------------------------
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0700 Rev= 0.00
S: Manufacturer=Quectel, Incorporated
S: Product=Quectel LPWA Module
S: SerialNumber=884328a2
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+QCFGEXT: "usbnet","ecm"
------------------------
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0700 Rev= 0.00
S: Manufacturer=Quectel, Incorporated
S: Product=Quectel LPWA Module
S: SerialNumber=884328a2
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+QCFGEXT: "usbnet","rmnet"
--------------------------
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0700 Rev= 0.00
S: Manufacturer=Quectel, Incorporated
S: Product=Quectel LPWA Module
S: SerialNumber=884328a2
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Carl Yin <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1140,6 +1140,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
+ .driver_info = RSVD(3) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
From: Miaoqian Lin <[email protected]>
[ Upstream commit 94e3dba710fe0afc772172305444250023fc2d30 ]
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: f386509e4959 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Acked-by: Hugues Fruchet <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sti/delta/delta-v4l2.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/sti/delta/delta-v4l2.c b/drivers/media/platform/sti/delta/delta-v4l2.c
index 7c925f309158..a489d0d17989 100644
--- a/drivers/media/platform/sti/delta/delta-v4l2.c
+++ b/drivers/media/platform/sti/delta/delta-v4l2.c
@@ -1880,7 +1880,7 @@ static int delta_probe(struct platform_device *pdev)
if (ret) {
dev_err(delta->dev, "%s failed to initialize firmware ipc channel\n",
DELTA_PREFIX);
- goto err;
+ goto err_pm_disable;
}
/* register all available decoders */
@@ -1894,7 +1894,7 @@ static int delta_probe(struct platform_device *pdev)
if (ret) {
dev_err(delta->dev, "%s failed to register V4L2 device\n",
DELTA_PREFIX);
- goto err;
+ goto err_pm_disable;
}
delta->work_queue = create_workqueue(DELTA_NAME);
@@ -1919,6 +1919,8 @@ static int delta_probe(struct platform_device *pdev)
destroy_workqueue(delta->work_queue);
err_v4l2:
v4l2_device_unregister(&delta->v4l2_dev);
+err_pm_disable:
+ pm_runtime_disable(dev);
err:
return ret;
}
--
2.35.1
From: Akira Yokosawa <[email protected]>
commit 627f01eab93d8671d4e4afee9b148f9998d20e7c upstream.
One of the changes in Sphinx 5.0.0 [1] says [sic]:
5.0.0 final
- #10474: language does not accept None as it value.
The default value of language becomes to 'en' now.
[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022
It results in a new warning from Sphinx 5.0.0 [sic]:
WARNING: Invalid configuration value found: 'language = None'.
Update your configuration to a valid langauge code. Falling
back to 'en' (English).
Silence the warning by using 'en'.
It works with all the Sphinx versions required for building
kernel documentation (1.7.9 or later).
Signed-off-by: Akira Yokosawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/conf.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -96,7 +96,7 @@ finally:
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
From: Mikulas Patocka <[email protected]>
[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ]
We observed the error "cacheline tracking ENOMEM, dma-debug disabled"
during a light system load (copying some files). The reason for this error
is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation -
so it can't access the emergency memory reserves and it fails as soon as
anybody reaches the watermark.
This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the
emergency memory reserves.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/dma-debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 61e7240947f5..163e0e9b357f 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -465,7 +465,7 @@ EXPORT_SYMBOL(debug_dma_dump_mappings);
* At any time debug_dma_assert_idle() can be called to trigger a
* warning if any cachelines in the given page are in the active set.
*/
-static RADIX_TREE(dma_active_cacheline, GFP_NOWAIT);
+static RADIX_TREE(dma_active_cacheline, GFP_ATOMIC);
static DEFINE_SPINLOCK(radix_lock);
#define ACTIVE_CACHELINE_MAX_OVERLAP ((1 << RADIX_TREE_MAX_TAGS) - 1)
#define CACHELINE_PER_PAGE_SHIFT (PAGE_SHIFT - L1_CACHE_SHIFT)
--
2.35.1
From: Linus Torvalds <[email protected]>
[ Upstream commit 7aefd8b53815274f3ef398d370a3c9b27dd9f00c ]
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 12dd261fc308..628de21c03d2 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -72,7 +72,7 @@ static void ipu_crtc_disable_planes(struct ipu_crtc *ipu_crtc,
drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) {
if (plane == &ipu_crtc->plane[0]->base)
disable_full = true;
- if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
+ if (ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
disable_partial = true;
}
--
2.35.1
From: Wang Cheng <[email protected]>
[ Upstream commit 0458e5428e5e959d201a40ffe71d762a79ecedc4 ]
When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0,
'mac[6]' will not be initialized.
BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170
usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238
usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293
really_probe+0x653/0x14b0 drivers/base/dd.c:596
__driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752
driver_probe_device drivers/base/dd.c:782 [inline]
__device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899
bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427
__device_attach+0x593/0x8e0 drivers/base/dd.c:970
device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017
bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487
device_add+0x1fff/0x26e0 drivers/base/core.c:3405
usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566
hub_port_connect drivers/usb/core/hub.c:5358 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5502 [inline]
port_event drivers/usb/core/hub.c:5660 [inline]
hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742
process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307
worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454
kthread+0x3c7/0x500 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
Local variable mac created at:
r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394
usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396
KMSAN: uninit-value in r871xu_drv_init
https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8
Reported-by: <[email protected]>
Tested-by: <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Wang Cheng <[email protected]>
Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8712/usb_intf.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index 8be4fcc54ad6..b7bd37b62861 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -569,13 +569,13 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
} else {
AutoloadFail = false;
}
- if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
+ if ((!AutoloadFail) ||
+ ((mac[0] == 0xff) && (mac[1] == 0xff) &&
(mac[2] == 0xff) && (mac[3] == 0xff) &&
(mac[4] == 0xff) && (mac[5] == 0xff)) ||
((mac[0] == 0x00) && (mac[1] == 0x00) &&
(mac[2] == 0x00) && (mac[3] == 0x00) &&
- (mac[4] == 0x00) && (mac[5] == 0x00)) ||
- (!AutoloadFail)) {
+ (mac[4] == 0x00) && (mac[5] == 0x00))) {
mac[0] = 0x00;
mac[1] = 0xe0;
mac[2] = 0x4c;
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit afaa7b933ef00a2d3262f4d1252087613fb5c06d ]
of_node_get() returns a node with refcount incremented.
Calling of_node_put() to drop the reference when not needed anymore.
Fixes: 3784b6d64dc5 ("regulator: pfuze100: add pfuze100 regulator driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/pfuze100-regulator.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 4f205366d8ae..587a6bf9037b 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -431,6 +431,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
parent = of_get_child_by_name(np, "regulators");
if (!parent) {
dev_err(dev, "regulators node not found\n");
+ of_node_put(np);
return -EINVAL;
}
@@ -455,6 +456,7 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
}
of_node_put(parent);
+ of_node_put(np);
if (ret < 0) {
dev_err(dev, "Error parsing regulator init data: %d\n",
ret);
--
2.35.1
From: Yang Yingliang <[email protected]>
[ Upstream commit be2af740e2a9c7134f2d8ab4f104006e110b13de ]
Fix the missing clk_disable_unprepare() before return
from wm2000_anc_transition() in the error handling case.
Fixes: 514cfd6dd725 ("ASoC: wm2000: Integrate with clock API")
Signed-off-by: Yang Yingliang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm2000.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index 23cde3a0dc11..73cda3c2a861 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -545,7 +545,7 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000,
{
struct i2c_client *i2c = wm2000->i2c;
int i, j;
- int ret;
+ int ret = 0;
if (wm2000->anc_mode == mode)
return 0;
@@ -575,13 +575,13 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000,
ret = anc_transitions[i].step[j](i2c,
anc_transitions[i].analogue);
if (ret != 0)
- return ret;
+ break;
}
if (anc_transitions[i].dest == ANC_OFF)
clk_disable_unprepare(wm2000->mclk);
- return 0;
+ return ret;
}
static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)
--
2.35.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 4a388f08d8784af48f352193d2b72aaf167a57a1 ]
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean)
Fixes: 2f32b51b609f ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/xfrm4_protocol.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/ipv4/xfrm4_protocol.c b/net/ipv4/xfrm4_protocol.c
index 8dd0e6ab8606..0e1f5dc2766b 100644
--- a/net/ipv4/xfrm4_protocol.c
+++ b/net/ipv4/xfrm4_protocol.c
@@ -297,4 +297,3 @@ void __init xfrm4_protocol_init(void)
{
xfrm_input_register_afinfo(&xfrm4_input_afinfo);
}
-EXPORT_SYMBOL(xfrm4_protocol_init);
--
2.35.1
From: Randy Dunlap <[email protected]>
[ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/idle.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index d7216c9abda1..ca79aacfeda2 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -41,7 +41,7 @@ static int __init powersave_off(char *arg)
{
ppc_md.power_save = NULL;
cpuidle_disable = IDLE_POWERSAVE_OFF;
- return 0;
+ return 1;
}
__setup("powersave=off", powersave_off);
--
2.35.1
From: Qu Wenruo <[email protected]>
commit d5321a0fa8bc49f11bea0b470800962c17d92d8f upstream.
The following error message lack the "0x" obviously:
cannot mount because of unsupported optional features (4000)
Add the prefix to make it less confusing. This can happen on older
kernels that try to mount a filesystem with newer features so it makes
sense to backport to older trees.
CC: [email protected] # 4.14+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/disk-io.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2653,7 +2653,7 @@ int open_ctree(struct super_block *sb,
~BTRFS_FEATURE_INCOMPAT_SUPP;
if (features) {
btrfs_err(fs_info,
- "cannot mount because of unsupported optional features (%llx)",
+ "cannot mount because of unsupported optional features (0x%llx)",
features);
err = -EINVAL;
goto fail_alloc;
@@ -2713,7 +2713,7 @@ int open_ctree(struct super_block *sb,
~BTRFS_FEATURE_COMPAT_RO_SUPP;
if (!sb_rdonly(sb) && features) {
btrfs_err(fs_info,
- "cannot mount read-write because of unsupported optional features (%llx)",
+ "cannot mount read-write because of unsupported optional features (0x%llx)",
features);
err = -EINVAL;
goto fail_alloc;
From: Gong Yuanjun <[email protected]>
[ Upstream commit a2b28708b645c5632dc93669ab06e97874c8244f ]
In radeon_fp_native_mode(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
The failure status of drm_cvt_mode() on the other path is checked too.
Signed-off-by: Gong Yuanjun <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_connectors.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index fc021b8e4077..dd7d771d13b5 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -489,6 +489,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
native_mode->vdisplay != 0 &&
native_mode->clock != 0) {
mode = drm_mode_duplicate(dev, native_mode);
+ if (!mode)
+ return NULL;
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
drm_mode_set_name(mode);
@@ -503,6 +505,8 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
* simpler.
*/
mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+ if (!mode)
+ return NULL;
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
}
--
2.35.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 71bc7cf3be65bab441e03667cf215c557712976c ]
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Fixes: 2f227605394b ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 9f7d917458c7..d90aae2a5cfd 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -710,7 +710,7 @@ static int armada_37xx_irqchip_register(struct platform_device *pdev,
for (i = 0; i < nr_irq_parent; i++) {
int irq = irq_of_parse_and_map(np, i);
- if (irq < 0)
+ if (!irq)
continue;
gpiochip_set_chained_irqchip(gc, irqchip, irq,
--
2.35.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit f038e8186fbc5723d7d38c6fa1d342945107347e ]
The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.
Reported-by: Rob Herring <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a3c4b9e03fbf..dc539a4eb27a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -128,7 +128,7 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@50 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x50>;
};
@@ -287,7 +287,7 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@51 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x51>;
};
--
2.35.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ]
UDC driver should not touch gadget's driver internals, especially it
should not reset driver->bus. This wasn't harmful so far, but since
commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget
subsystem got it's own bus and messing with ->bus triggers the
following NULL pointer dereference:
dwc2 12480000.hsotg: bound driver g_ether
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: ...
CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at module_add_driver+0x44/0xe8
LR is at sysfs_do_create_link_sd+0x84/0xe0
...
Process modprobe (pid: 620, stack limit = 0x(ptrval))
...
module_add_driver from bus_add_driver+0xf4/0x1e4
bus_add_driver from driver_register+0x78/0x10c
driver_register from usb_gadget_register_driver_owner+0x40/0xb4
usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0
do_one_initcall from do_init_module+0x44/0x1c8
do_init_module from load_module+0x19b8/0x1b9c
load_module from sys_finit_module+0xdc/0xfc
sys_finit_module from ret_fast_syscall+0x0/0x54
Exception stack(0xf1771fa8 to 0xf1771ff0)
...
dwc2 12480000.hsotg: new device is high-speed
---[ end trace 0000000000000000 ]---
Fix this by removing driver->bus entry reset.
Signed-off-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/gadget.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index dddc5d02b552..14f907cf71a3 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4302,7 +4302,6 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
WARN_ON(hsotg->driver);
- driver->driver.bus = NULL;
hsotg->driver = driver;
hsotg->gadget.dev.of_node = hsotg->dev->of_node;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
--
2.35.1
From: Ye Bin <[email protected]>
commit ef09ed5d37b84d18562b30cf7253e57062d0db05 upstream.
we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x83/0xa0
filemap_flush+0xab/0xe0
ext4_alloc_da_blocks+0x51/0x120
__ext4_ioctl+0x1534/0x3210
__x64_sys_ioctl+0x12c/0x170
do_syscall_64+0x3b/0x90
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode. But there maybe already
convert from inline to extent. To solve this issue, we call
filemap_flush first..
Cc: [email protected]
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1995,6 +1995,18 @@ int ext4_convert_inline_data(struct inod
if (!ext4_has_inline_data(inode)) {
ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
return 0;
+ } else if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
+ /*
+ * Inode has inline data but EXT4_STATE_MAY_INLINE_DATA is
+ * cleared. This means we are in the middle of moving of
+ * inline data to delay allocated block. Just force writeout
+ * here to finish conversion.
+ */
+ error = filemap_flush(inode->i_mapping);
+ if (error)
+ return error;
+ if (!ext4_has_inline_data(inode))
+ return 0;
}
needed_blocks = ext4_writepage_trans_blocks(inode);
From: Lin Ma <[email protected]>
[ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ]
There is a logic error when removing rt5645 device as the function
rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and
delete the &rt5645->btn_check_timer latter. However, since the timer
handler rt5645_btn_check_callback() will re-queue the jack_detect_work,
this cleanup order is buggy.
That is, once the del_timer_sync in rt5645_i2c_remove is concurrently
run with the rt5645_btn_check_callback, the canceled jack_detect_work
will be rescheduled again, leading to possible use-after-free.
This patch fix the issue by placing the del_timer_sync function before
the cancel_delayed_work_sync.
Signed-off-by: Lin Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5645.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c
index a98647ac497c..01de25813c72 100644
--- a/sound/soc/codecs/rt5645.c
+++ b/sound/soc/codecs/rt5645.c
@@ -3972,9 +3972,14 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
if (i2c->irq)
free_irq(i2c->irq, rt5645);
+ /*
+ * Since the rt5645_btn_check_callback() can queue jack_detect_work,
+ * the timer need to be delted first
+ */
+ del_timer_sync(&rt5645->btn_check_timer);
+
cancel_delayed_work_sync(&rt5645->jack_detect_work);
cancel_delayed_work_sync(&rt5645->rcclock_work);
- del_timer_sync(&rt5645->btn_check_timer);
snd_soc_unregister_codec(&i2c->dev);
regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
--
2.35.1
From: Martin Faltesek <[email protected]>
commit 996419e0594abb311fb958553809f24f38e7abbe upstream.
Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.
Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: [email protected]
Signed-off-by: Martin Faltesek <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/st21nfca/se.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/nfc/st21nfca/se.c
+++ b/drivers/nfc/st21nfca/se.c
@@ -332,22 +332,29 @@ int st21nfca_connectivity_event_received
transaction->aid_len = skb->data[1];
/* Checking if the length of the AID is valid */
- if (transaction->aid_len > sizeof(transaction->aid))
+ if (transaction->aid_len > sizeof(transaction->aid)) {
+ devm_kfree(dev, transaction);
return -EINVAL;
+ }
memcpy(transaction->aid, &skb->data[2],
transaction->aid_len);
/* Check next byte is PARAMETERS tag (82) */
if (skb->data[transaction->aid_len + 2] !=
- NFC_EVT_TRANSACTION_PARAMS_TAG)
+ NFC_EVT_TRANSACTION_PARAMS_TAG) {
+ devm_kfree(dev, transaction);
return -EPROTO;
+ }
transaction->params_len = skb->data[transaction->aid_len + 3];
/* Total size is allocated (skb->len - 2) minus fixed array members */
- if (transaction->params_len > ((skb->len - 2) - sizeof(struct nfc_evt_transaction)))
+ if (transaction->params_len > ((skb->len - 2) -
+ sizeof(struct nfc_evt_transaction))) {
+ devm_kfree(dev, transaction);
return -EINVAL;
+ }
memcpy(transaction->params, skb->data +
transaction->aid_len + 4, transaction->params_len);
From: Jason A. Donenfeld <[email protected]>
[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]
In order to measure the boot process, the timer should be switched on as
early in boot as possible. As well, the commit defines the get_cycles
macro, like the previous patches in this series, so that generic code is
aware that it's implemented by the platform, as is done on other archs.
Cc: Thomas Gleixner <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Acked-by: Stafford Horne <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/openrisc/include/asm/timex.h | 1 +
arch/openrisc/kernel/head.S | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h
index 9935cad1b9b9..34d015bf0462 100644
--- a/arch/openrisc/include/asm/timex.h
+++ b/arch/openrisc/include/asm/timex.h
@@ -27,6 +27,7 @@ static inline cycles_t get_cycles(void)
{
return mfspr(SPR_TTCR);
}
+#define get_cycles get_cycles
/* This isn't really used any more */
#define CLOCK_TICK_RATE 1000
diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 4d878d13b860..3f1e9d168710 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -459,6 +459,15 @@ _start:
l.ori r3,r0,0x1
l.mtspr r0,r3,SPR_SR
+ /*
+ * Start the TTCR as early as possible, so that the RNG can make use of
+ * measurements of boot time from the earliest opportunity. Especially
+ * important is that the TTCR does not return zero by the time we reach
+ * rand_initialize().
+ */
+ l.movhi r3,hi(SPR_TTMR_CR)
+ l.mtspr r0,r3,SPR_TTMR
+
CLEAR_GPR(r1)
CLEAR_GPR(r2)
CLEAR_GPR(r3)
--
2.35.1
From: Jan Kara <[email protected]>
commit 3ba733f879c2a88910744647e41edeefbc0d92b2 upstream.
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
Cc: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -747,12 +747,14 @@ static struct dx_frame *
dx_probe(struct ext4_filename *fname, struct inode *dir,
struct dx_hash_info *hinfo, struct dx_frame *frame_in)
{
- unsigned count, indirect;
+ unsigned count, indirect, level, i;
struct dx_entry *at, *entries, *p, *q, *m;
struct dx_root *root;
struct dx_frame *frame = frame_in;
struct dx_frame *ret_err = ERR_PTR(ERR_BAD_DX_DIR);
u32 hash;
+ ext4_lblk_t block;
+ ext4_lblk_t blocks[EXT4_HTREE_LEVEL];
memset(frame_in, 0, EXT4_HTREE_LEVEL * sizeof(frame_in[0]));
frame->bh = ext4_read_dirblock(dir, 0, INDEX);
@@ -808,6 +810,8 @@ dx_probe(struct ext4_filename *fname, st
}
dxtrace(printk("Look up %x", hash));
+ level = 0;
+ blocks[0] = 0;
while (1) {
count = dx_get_count(entries);
if (!count || count > dx_get_limit(entries)) {
@@ -849,15 +853,27 @@ dx_probe(struct ext4_filename *fname, st
dx_get_block(at)));
frame->entries = entries;
frame->at = at;
- if (!indirect--)
+
+ block = dx_get_block(at);
+ for (i = 0; i <= level; i++) {
+ if (blocks[i] == block) {
+ ext4_warning_inode(dir,
+ "dx entry: tree cycle block %u points back to block %u",
+ blocks[level], block);
+ goto fail;
+ }
+ }
+ if (++level > indirect)
return frame;
+ blocks[level] = block;
frame++;
- frame->bh = ext4_read_dirblock(dir, dx_get_block(at), INDEX);
+ frame->bh = ext4_read_dirblock(dir, block, INDEX);
if (IS_ERR(frame->bh)) {
ret_err = (struct dx_frame *) frame->bh;
frame->bh = NULL;
goto fail;
}
+
entries = ((struct dx_node *) frame->bh->b_data)->entries;
if (dx_get_limit(entries) != dx_node_limit(dir)) {
From: Duoming Zhou <[email protected]>
[ Upstream commit 62b2caef400c1738b6d22f636c628d9f85cd4c4c ]
There is a deadlock in sa1100_set_termios(), which is shown
below:
(Thread 1) | (Thread 2)
| sa1100_enable_ms()
sa1100_set_termios() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | sa1100_timeout()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.
This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock.
Signed-off-by: Duoming Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/sa1100.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index fd3d1329d48c..68eb1c9faa29 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -452,6 +452,8 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
+ del_timer_sync(&sport->timer);
+
spin_lock_irqsave(&sport->port.lock, flags);
sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
@@ -482,8 +484,6 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
UTSR1_TO_SM(UTSR1_ROR);
}
- del_timer_sync(&sport->timer);
-
/*
* Update the per-port timeout.
*/
--
2.35.1
From: Yang Yingliang <[email protected]>
[ Upstream commit d3b43eb505bffb8e4cdf6800c15660c001553fe6 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-mt6397.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index c696d9186451..4fdd96f71e11 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -339,6 +339,8 @@ static int mtk_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
rtc->addr_base = res->start;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
--
2.35.1
From: Leo Yan <[email protected]>
[ Upstream commit c4040212bc97d16040712a410335f93bc94d2262 ]
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/builtin-c2c.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 264d458bfe2a..9cbd8b0d5b77 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -2552,9 +2552,7 @@ static int perf_c2c__report(int argc, const char **argv)
"the input file to process"),
OPT_INCR('N', "node-info", &c2c.node_info,
"show extra node info in report (repeat for more info)"),
-#ifdef HAVE_SLANG_SUPPORT
OPT_BOOLEAN(0, "stdio", &c2c.use_stdio, "Use the stdio interface"),
-#endif
OPT_BOOLEAN(0, "stats", &c2c.stats_only,
"Display only statistic tables (implies --stdio)"),
OPT_BOOLEAN(0, "full-symbols", &c2c.symbol_full,
@@ -2581,6 +2579,10 @@ static int perf_c2c__report(int argc, const char **argv)
if (argc)
usage_with_options(report_c2c_usage, options);
+#ifndef HAVE_SLANG_SUPPORT
+ c2c.use_stdio = true;
+#endif
+
if (c2c.stats_only)
c2c.use_stdio = true;
--
2.35.1
From: Zhengjun Xing <[email protected]>
[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
So the perf tool follows the kernel side and just set bit8 other than bit21.
Fixes: fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Xing Zhengjun <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/pmu-events/jevents.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c
index 8e487b2a37a6..dcfbbade657e 100644
--- a/tools/perf/pmu-events/jevents.c
+++ b/tools/perf/pmu-events/jevents.c
@@ -428,7 +428,7 @@ int json_events(const char *fn,
} else if (json_streq(map, field, "ExtSel")) {
char *code = NULL;
addfield(map, &code, "", "", val);
- eventcode |= strtoul(code, NULL, 0) << 21;
+ eventcode |= strtoul(code, NULL, 0) << 8;
free(code);
} else if (json_streq(map, field, "EventName")) {
addfield(map, &name, "", "", val);
--
2.35.1
From: Yong Wu <[email protected]>
[ Upstream commit ee55f75e4bcade81d253163641b63bef3e76cac4 ]
Lack the list_del in the mtk_iommu_remove, and remove
bus_set_iommu(*, NULL) since there may be several iommu HWs.
we can not bus_set_iommu null when one iommu driver unbind.
This could be a fix for mt2712 which support 2 M4U HW and list them.
Fixes: 7c3a2ec02806 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain")
Signed-off-by: Yong Wu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/mtk_iommu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 0f99e95a1a73..7ac868c71577 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -696,8 +696,7 @@ static int mtk_iommu_remove(struct platform_device *pdev)
iommu_device_sysfs_remove(&data->iommu);
iommu_device_unregister(&data->iommu);
- if (iommu_present(&platform_bus_type))
- bus_set_iommu(&platform_bus_type, NULL);
+ list_del(&data->list);
clk_disable_unprepare(data->bclk);
devm_free_irq(&pdev->dev, data->irq, data);
--
2.35.1
From: Eric W. Biederman <[email protected]>
commit 4a3d2717d140401df7501a95e454180831a0c5af upstream.
xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in
user_enable_single_step and user_disable_single_step without locking could
potentiallly cause problems.
So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP
that xtensa already had defined but unused.
Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.
Cc: [email protected]
Acked-by: Max Filippov <[email protected]>
Tested-by: Kees Cook <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/ptrace.c | 4 ++--
arch/xtensa/kernel/signal.c | 4 ++--
include/linux/ptrace.h | 6 ------
3 files changed, 4 insertions(+), 10 deletions(-)
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -35,12 +35,12 @@
void user_enable_single_step(struct task_struct *child)
{
- child->ptrace |= PT_SINGLESTEP;
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
}
void user_disable_single_step(struct task_struct *child)
{
- child->ptrace &= ~PT_SINGLESTEP;
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
}
/*
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -459,7 +459,7 @@ static void do_signal(struct pt_regs *re
/* Set up the stack frame */
ret = setup_frame(&ksig, sigmask_to_save(), regs);
signal_setup_done(ret, &ksig, 0);
- if (current->ptrace & PT_SINGLESTEP)
+ if (test_thread_flag(TIF_SINGLESTEP))
task_pt_regs(current)->icountlevel = 1;
return;
@@ -485,7 +485,7 @@ static void do_signal(struct pt_regs *re
/* If there's no signal to deliver, we just restore the saved mask. */
restore_saved_sigmask();
- if (current->ptrace & PT_SINGLESTEP)
+ if (test_thread_flag(TIF_SINGLESTEP))
task_pt_regs(current)->icountlevel = 1;
return;
}
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -40,12 +40,6 @@ extern int ptrace_access_vm(struct task_
#define PT_EXITKILL (PTRACE_O_EXITKILL << PT_OPT_FLAG_SHIFT)
#define PT_SUSPEND_SECCOMP (PTRACE_O_SUSPEND_SECCOMP << PT_OPT_FLAG_SHIFT)
-/* single stepping state bits (used on ARM and PA-RISC) */
-#define PT_SINGLESTEP_BIT 31
-#define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT)
-#define PT_BLOCKSTEP_BIT 30
-#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT)
-
extern long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
From: Zhihao Cheng <[email protected]>
commit 68f4c6eba70df70a720188bce95c85570ddfcc87 upstream.
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Above process triggers a hungtask like:
[ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds.
[ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty
[ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid:
2426 flags:0x00004000
[ 399.051556] Call Trace:
[ 399.051570] __schedule+0x480/0x1050
[ 399.051592] schedule+0x92/0x1a0
[ 399.051602] io_schedule+0x22/0x50
[ 399.051613] blk_mq_get_tag+0x1d3/0x3c0
[ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0
[ 399.051657] blk_mq_submit_bio+0x68d/0xca0
[ 399.051674] __submit_bio+0x1b5/0x2d0
[ 399.051708] submit_bio_noacct+0x34e/0x720
[ 399.051718] submit_bio+0x3b/0x150
[ 399.051725] submit_bh_wbc+0x161/0x230
[ 399.051734] __sync_dirty_buffer+0xd1/0x420
[ 399.051744] sync_dirty_buffer+0x17/0x20
[ 399.051750] __fat_write_inode+0x289/0x310
[ 399.051766] fat_write_inode+0x2a/0xa0
[ 399.051783] __writeback_single_inode+0x53c/0x6f0
[ 399.051795] writeback_single_inode+0x145/0x200
[ 399.051803] sync_inode_metadata+0x45/0x70
[ 399.051856] __generic_file_fsync+0xa3/0x150
[ 399.051880] fat_file_fsync+0x1d/0x80
[ 399.051895] vfs_fsync_range+0x40/0xb0
[ 399.051929] __x64_sys_fsync+0x18/0x30
In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
Goto Link to find a reproducer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837
Cc: [email protected] # v4.3
Signed-off-by: Zhihao Cheng <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fs-writeback.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -1565,11 +1565,12 @@ static long writeback_sb_inodes(struct s
};
unsigned long start_time = jiffies;
long write_chunk;
- long wrote = 0; /* count both pages and inodes */
+ long total_wrote = 0; /* count both pages and inodes */
while (!list_empty(&wb->b_io)) {
struct inode *inode = wb_inode(wb->b_io.prev);
struct bdi_writeback *tmp_wb;
+ long wrote;
if (inode->i_sb != sb) {
if (work->sb) {
@@ -1645,7 +1646,9 @@ static long writeback_sb_inodes(struct s
wbc_detach_inode(&wbc);
work->nr_pages -= write_chunk - wbc.nr_to_write;
- wrote += write_chunk - wbc.nr_to_write;
+ wrote = write_chunk - wbc.nr_to_write - wbc.pages_skipped;
+ wrote = wrote < 0 ? 0 : wrote;
+ total_wrote += wrote;
if (need_resched()) {
/*
@@ -1667,7 +1670,7 @@ static long writeback_sb_inodes(struct s
tmp_wb = inode_to_wb_and_lock_list(inode);
spin_lock(&inode->i_lock);
if (!(inode->i_state & I_DIRTY_ALL))
- wrote++;
+ total_wrote++;
requeue_inode(inode, tmp_wb, &wbc);
inode_sync_complete(inode);
spin_unlock(&inode->i_lock);
@@ -1681,14 +1684,14 @@ static long writeback_sb_inodes(struct s
* bail out to wb_writeback() often enough to check
* background threshold and other termination conditions.
*/
- if (wrote) {
+ if (total_wrote) {
if (time_is_before_jiffies(start_time + HZ / 10UL))
break;
if (work->nr_pages <= 0)
break;
}
}
- return wrote;
+ return total_wrote;
}
static long __writeback_inodes_wb(struct bdi_writeback *wb,
From: Yang Yingliang <[email protected]>
[ Upstream commit a36e506711548df923ceb7ec9f6001375be799a5 ]
It will cause null-ptr-deref if platform_get_resource_byname() returns NULL,
we need check the return value.
Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/482992/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 17e069a133a4..0df62c9c2856 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -148,6 +148,10 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
/* HDCP needs physical address of hdmi register */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
config->mmio_name);
+ if (!res) {
+ ret = -EINVAL;
+ goto fail;
+ }
hdmi->mmio_phy_addr = res->start;
hdmi->qfprom_mmio = msm_ioremap(pdev,
--
2.35.1
From: Kajol Jain <[email protected]>
[ Upstream commit ab0cc6bbf0c812731c703ec757fcc3fc3a457a34 ]
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9).
When scheduling events as a group, all events in that group should
match value in threshold bits (like thresh compare, thresh control,
thresh select). Otherwise event open for the sibling events should fail.
But in the current code, incase thresh compare bits are not valid,
we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and
PM_THRESH_MET (8734340101ec) is expected to fail as both event
request different thresh control bits and invalid thresh compare value.
Result before the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Performance counter stats for 'sleep 1':
11,048 r8735340401e0
1,967 r8734340101ec
1.001354036 seconds time elapsed
0.001421000 seconds user
0.000000000 seconds sys
Result after the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (r8735340401e0).
/bin/dmesg | grep -i perf may provide additional information.
Fixes: 78a16d9fc1206 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9")
Signed-off-by: Kajol Jain <[email protected]>
Reviewed-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/isa207-common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 24a78565bca6..279bf3a3afbf 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -324,7 +324,8 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
if (event_is_threshold(event) && is_thresh_cmp_valid(event)) {
mask |= CNST_THRESH_MASK;
value |= CNST_THRESH_VAL(event >> EVENT_THRESH_SHIFT);
- }
+ } else if (event_is_threshold(event))
+ return -1;
} else {
/*
* Special case for PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC,
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 05654431a18fe24e5e46a375d98904134628a102 ]
This node pointer is returned by of_parse_phandle() with
refcount incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt2701/mt2701-wm8960.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/soc/mediatek/mt2701/mt2701-wm8960.c b/sound/soc/mediatek/mt2701/mt2701-wm8960.c
index a08ce2323bdc..3db92506ccea 100644
--- a/sound/soc/mediatek/mt2701/mt2701-wm8960.c
+++ b/sound/soc/mediatek/mt2701/mt2701-wm8960.c
@@ -126,7 +126,8 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev)
if (!codec_node) {
dev_err(&pdev->dev,
"Property 'audio-codec' missing or invalid\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto put_platform_node;
}
for (i = 0; i < card->num_links; i++) {
if (mt2701_wm8960_dai_links[i].codec_name)
@@ -137,7 +138,7 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev)
ret = snd_soc_of_parse_audio_routing(card, "audio-routing");
if (ret) {
dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret);
- return ret;
+ goto put_codec_node;
}
ret = devm_snd_soc_register_card(&pdev->dev, card);
@@ -145,6 +146,10 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+put_codec_node:
+ of_node_put(codec_node);
+put_platform_node:
+ of_node_put(platform_node);
return ret;
}
--
2.35.1
From: Björn Ardö <[email protected]>
[ Upstream commit bca1a1004615efe141fd78f360ecc48c60bc4ad5 ]
This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743,
"mailbox: avoid timer start from callback"
The previous commit was reverted since it lead to a race that
caused the hrtimer to not be started at all. The check for
hrtimer_active() in msg_submit() will return true if the
callback function txdone_hrtimer() is currently running. This
function could return HRTIMER_NORESTART and then the timer
will not be restarted, and also msg_submit() will not start
the timer. This will lead to a message actually being submitted
but no timer will start to check for its compleation.
The original fix that added checking hrtimer_active() was added to
avoid a warning with hrtimer_forward. Looking in the kernel
another solution to avoid this warning is to check hrtimer_is_queued()
before calling hrtimer_forward_now() instead. This however requires a
lock so the timer is not started by msg_submit() inbetween this check
and the hrtimer_forward() call.
Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback")
Signed-off-by: Björn Ardö <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mailbox/mailbox.c | 19 +++++++++++++------
include/linux/mailbox_controller.h | 1 +
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
index 10a559cfb7ea..aa28fdcb81b9 100644
--- a/drivers/mailbox/mailbox.c
+++ b/drivers/mailbox/mailbox.c
@@ -85,11 +85,11 @@ static void msg_submit(struct mbox_chan *chan)
exit:
spin_unlock_irqrestore(&chan->lock, flags);
- /* kick start the timer immediately to avoid delays */
if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
- /* but only if not already active */
- if (!hrtimer_active(&chan->mbox->poll_hrt))
- hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+ /* kick start the timer immediately to avoid delays */
+ spin_lock_irqsave(&chan->mbox->poll_hrt_lock, flags);
+ hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+ spin_unlock_irqrestore(&chan->mbox->poll_hrt_lock, flags);
}
}
@@ -123,20 +123,26 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
container_of(hrtimer, struct mbox_controller, poll_hrt);
bool txdone, resched = false;
int i;
+ unsigned long flags;
for (i = 0; i < mbox->num_chans; i++) {
struct mbox_chan *chan = &mbox->chans[i];
if (chan->active_req && chan->cl) {
- resched = true;
txdone = chan->mbox->ops->last_tx_done(chan);
if (txdone)
tx_tick(chan, 0);
+ else
+ resched = true;
}
}
if (resched) {
- hrtimer_forward_now(hrtimer, ms_to_ktime(mbox->txpoll_period));
+ spin_lock_irqsave(&mbox->poll_hrt_lock, flags);
+ if (!hrtimer_is_queued(hrtimer))
+ hrtimer_forward_now(hrtimer, ms_to_ktime(mbox->txpoll_period));
+ spin_unlock_irqrestore(&mbox->poll_hrt_lock, flags);
+
return HRTIMER_RESTART;
}
return HRTIMER_NORESTART;
@@ -473,6 +479,7 @@ int mbox_controller_register(struct mbox_controller *mbox)
hrtimer_init(&mbox->poll_hrt, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
mbox->poll_hrt.function = txdone_hrtimer;
+ spin_lock_init(&mbox->poll_hrt_lock);
}
for (i = 0; i < mbox->num_chans; i++) {
diff --git a/include/linux/mailbox_controller.h b/include/linux/mailbox_controller.h
index 74deadb42d76..5a4524f66ea1 100644
--- a/include/linux/mailbox_controller.h
+++ b/include/linux/mailbox_controller.h
@@ -83,6 +83,7 @@ struct mbox_controller {
const struct of_phandle_args *sp);
/* Internal to API */
struct hrtimer poll_hrt;
+ spinlock_t poll_hrt_lock;
struct list_head node;
};
--
2.35.1
From: huangwenhui <[email protected]>
commit d5ea7544c32ba27c2c5826248e4ff58bd50a2518 upstream.
On a machine with CX20632, Alsamixer doesn't have 'Loopback
Mixing' and 'Line'.
Signed-off-by: huangwenhui <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_conexant.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1059,6 +1059,13 @@ static int patch_conexant_auto(struct hd
snd_hda_pick_fixup(codec, cxt5051_fixup_models,
cxt5051_fixups, cxt_fixups);
break;
+ case 0x14f15098:
+ codec->pin_amp_workaround = 1;
+ spec->gen.mixer_nid = 0x22;
+ spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
+ snd_hda_pick_fixup(codec, cxt5066_fixup_models,
+ cxt5066_fixups, cxt_fixups);
+ break;
case 0x14f150f2:
codec->power_save_node = 1;
/* Fall through */
From: Thibaut VARÈNE <[email protected]>
[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]
This patch fixes an invalid TX PA DC bias level on QCA9561, which
results in a very low output power and very low throughput as devices
are further away from the AP (compared to other 2.4GHz APs).
This patch was suggested by Felix Fietkau, who noted[1]:
"The value written to that register is wrong, because while the mask
definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the
shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is
wrong for 9561."
In real life testing, without this patch the 2.4GHz throughput on
Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to
practical maximum with the patch applied.
[1] https://lore.kernel.org/all/[email protected]
Signed-off-by: Thibaut VARÈNE <[email protected]>
Acked-by: Felix Fietkau <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index a171dbb29fbb..ad949eb02f3d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -720,7 +720,7 @@
#define AR_CH0_TOP2 (AR_SREV_9300(ah) ? 0x1628c : \
(AR_SREV_9462(ah) ? 0x16290 : 0x16284))
#define AR_CH0_TOP2_XPABIASLVL (AR_SREV_9561(ah) ? 0x1e00 : 0xf000)
-#define AR_CH0_TOP2_XPABIASLVL_S 12
+#define AR_CH0_TOP2_XPABIASLVL_S (AR_SREV_9561(ah) ? 9 : 12)
#define AR_CH0_XTAL (AR_SREV_9300(ah) ? 0x16294 : \
((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \
--
2.35.1
From: Zheyu Ma <[email protected]>
[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]
When the driver fails to call the dma_set_mask(), the driver will get
the following splat:
[ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240
[ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590
[ 55.856822] Call Trace:
[ 55.860327] __process_removed_driver+0x3c/0x240
[ 55.861347] bus_for_each_dev+0x102/0x160
[ 55.861681] i2c_del_driver+0x2f/0x50
This is because the driver has initialized the i2c related resources
in cx23885_dev_setup() but not released them in error handling, fix this
bug by modifying the error path that jumps after failing to call the
dma_set_mask().
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx23885/cx23885-core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index 4612f26fcd6d..6f297caf5540 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -2005,7 +2005,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
err = pci_set_dma_mask(pci_dev, 0xffffffff);
if (err) {
pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
- goto fail_ctrl;
+ goto fail_dma_set_mask;
}
err = request_irq(pci_dev->irq, cx23885_irq,
@@ -2013,7 +2013,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
if (err < 0) {
pr_err("%s: can't get IRQ %d\n",
dev->name, pci_dev->irq);
- goto fail_irq;
+ goto fail_dma_set_mask;
}
switch (dev->board) {
@@ -2035,7 +2035,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
return 0;
-fail_irq:
+fail_dma_set_mask:
cx23885_dev_unregister(dev);
fail_ctrl:
v4l2_ctrl_handler_free(hdl);
--
2.35.1
From: Mark-PK Tsai <[email protected]>
[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ]
To prepare for support asynchronous tracer_init_tracefs initcall,
avoid calling create_trace_option_files before __update_tracer_options.
Otherwise, create_trace_option_files will show warning because
some tracers in trace_types list are already in tr->topts.
For example, hwlat_tracer call register_tracer in late_initcall,
and global_trace.dir is already created in tracing_init_dentry,
hwlat_tracer will be put into tr->topts.
Then if the __update_tracer_options is executed after hwlat_tracer
registered, create_trace_option_files find that hwlat_tracer is
already in tr->topts.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index aaf1194be551..60a1733abbb7 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5363,12 +5363,18 @@ static void tracing_set_nop(struct trace_array *tr)
tr->current_trace = &nop_trace;
}
+static bool tracer_options_updated;
+
static void add_tracer_options(struct trace_array *tr, struct tracer *t)
{
/* Only enable if the directory has been created already. */
if (!tr->dir)
return;
+ /* Only create trace option files after update_tracer_options finish */
+ if (!tracer_options_updated)
+ return;
+
create_trace_option_files(tr, t);
}
@@ -7733,6 +7739,7 @@ static void __update_tracer_options(struct trace_array *tr)
static void update_tracer_options(struct trace_array *tr)
{
mutex_lock(&trace_types_lock);
+ tracer_options_updated = true;
__update_tracer_options(tr);
mutex_unlock(&trace_types_lock);
}
--
2.35.1
From: Zixuan Fu <[email protected]>
[ Upstream commit 0d4837fdb796f99369cf7691d33de1b856bcaf1f ]
In our fault-injection testing, the variable "nblocks" in dbFree() can be
zero when kmalloc_array() fails in dtSearch(). In this case, the variable
"mp" in dbFree() would be NULL and then it is dereferenced in
"write_metapage(mp)".
The failure log is listed as follows:
[ 13.824137] BUG: kernel NULL pointer dereference, address: 0000000000000020
...
[ 13.827416] RIP: 0010:dbFree+0x5f7/0x910 [jfs]
[ 13.834341] Call Trace:
[ 13.834540] <TASK>
[ 13.834713] txFreeMap+0x7b4/0xb10 [jfs]
[ 13.835038] txUpdateMap+0x311/0x650 [jfs]
[ 13.835375] jfs_lazycommit+0x5f2/0xc70 [jfs]
[ 13.835726] ? sched_dynamic_update+0x1b0/0x1b0
[ 13.836092] kthread+0x3c2/0x4a0
[ 13.836355] ? txLockFree+0x160/0x160 [jfs]
[ 13.836763] ? kthread_unuse_mm+0x160/0x160
[ 13.837106] ret_from_fork+0x1f/0x30
[ 13.837402] </TASK>
...
This patch adds a NULL check of "mp" before "write_metapage(mp)" is called.
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Zixuan Fu <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_dmap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 6dac48e29d28..a07fbb60ac3c 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -398,7 +398,8 @@ int dbFree(struct inode *ip, s64 blkno, s64 nblocks)
}
/* write the last buffer. */
- write_metapage(mp);
+ if (mp)
+ write_metapage(mp);
IREAD_UNLOCK(ipbmap);
--
2.35.1
From: Liu Zixian <[email protected]>
[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]
drm_cvt_mode may return NULL and we should check it.
This bug is found by syzkaller:
FAULT_INJECTION stacktrace:
[ 168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567408] Call trace:
[ 168.567414] dump_backtrace+0x0/0x310
[ 168.567418] show_stack+0x28/0x38
[ 168.567423] dump_stack+0xec/0x15c
[ 168.567427] should_fail+0x3ac/0x3d0
[ 168.567437] __should_failslab+0xb8/0x120
[ 168.567441] should_failslab+0x28/0xc0
[ 168.567445] kmem_cache_alloc_trace+0x50/0x640
[ 168.567454] drm_mode_create+0x40/0x90
[ 168.567458] drm_cvt_mode+0x48/0xc78
[ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567492] drm_mode_getconnector+0x2e0/0xa70
[ 168.567496] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567514] drm_ioctl+0x558/0x6d0
[ 168.567522] do_vfs_ioctl+0x160/0xf30
[ 168.567525] ksys_ioctl+0x98/0xd8
[ 168.567530] __arm64_sys_ioctl+0x50/0xc8
[ 168.567536] el0_svc_common+0xc8/0x320
[ 168.567540] el0_svc_handler+0xf8/0x160
[ 168.567544] el0_svc+0x10/0x218
KASAN stacktrace:
[ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[ 168.567566]
[ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567575] Call trace:
[ 168.567578] dump_backtrace+0x0/0x310
[ 168.567582] show_stack+0x28/0x38
[ 168.567586] dump_stack+0xec/0x15c
[ 168.567591] kasan_report+0x244/0x2f0
[ 168.567594] __asan_load4+0x58/0xb0
[ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567617] drm_mode_getconnector+0x2e0/0xa70
[ 168.567621] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567624] drm_ioctl+0x558/0x6d0
[ 168.567628] do_vfs_ioctl+0x160/0xf30
[ 168.567632] ksys_ioctl+0x98/0xd8
[ 168.567636] __arm64_sys_ioctl+0x50/0xc8
[ 168.567641] el0_svc_common+0xc8/0x320
[ 168.567645] el0_svc_handler+0xf8/0x160
[ 168.567649] el0_svc+0x10/0x218
Signed-off-by: Liu Zixian <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c
index b6d52055a11f..3a5f73bc2a37 100644
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -187,6 +187,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector)
DRM_DEBUG("add mode: %dx%d\n", width, height);
mode = drm_cvt_mode(connector->dev, width, height, 60,
false, false, false);
+ if (!mode)
+ return count;
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
count++;
--
2.35.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 5e3b07ca5cc78cd4a987e78446849e41288d87cb ]
The hardware only supports periods <= 1.6 ms and if a bigger period is
requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger
than 1.6 ms and then the duty cycle register is written with a value
bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly.
Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver")
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-lp3943.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
index fc446d5c19f9..34151fc4cd51 100644
--- a/drivers/pwm/pwm-lp3943.c
+++ b/drivers/pwm/pwm-lp3943.c
@@ -128,6 +128,7 @@ static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
if (err)
return err;
+ duty_ns = min(duty_ns, period_ns);
val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
return lp3943_write_byte(lp3943, reg_duty, val);
--
2.35.1
From: Dave Airlie <[email protected]>
commit 31ab27b14daaa75541a415c6794d6f3567fea44a upstream.
Submitting a cs with 0 chunks, causes an oops later, found trying
to execute the wrong userspace driver.
MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo
[172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[172536.665188] #PF: supervisor read access in kernel mode
[172536.665189] #PF: error_code(0x0000) - not-present page
[172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0
[172536.665195] Oops: 0000 [#1] SMP NOPTI
[172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS
[172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015
[172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu]
[172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10
[172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246
[172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68
[172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38
[172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40
[172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28
[172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000
[172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0
[172536.665287] Call Trace:
[172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm]
[172536.665338] drm_ioctl+0x201/0x3b0 [drm]
[172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665372] ? selinux_file_ioctl+0x135/0x230
[172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
[172536.665403] __x64_sys_ioctl+0x83/0xb0
[172536.665406] do_syscall_64+0x33/0x40
[172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018
Signed-off-by: Dave Airlie <[email protected]>
Cc: [email protected]
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -84,7 +84,7 @@ static int amdgpu_cs_parser_init(struct
int ret;
if (cs->in.num_chunks == 0)
- return 0;
+ return -EINVAL;
chunk_array = kmalloc_array(cs->in.num_chunks, sizeof(uint64_t), GFP_KERNEL);
if (!chunk_array)
From: Jakob Koschel <[email protected]>
[ Upstream commit 84ef256550196bc06e6849a34224c998b45bd557 ]
If the list does not exit early then data == NULL and 'module' does not
point to a valid list element.
Using 'module' in such a case is not valid and was therefore removed.
Fixes: 6dd67645f22c ("greybus: audio: Use single codec driver registration")
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Vaibhav Agarwal <[email protected]>
Reviewed-by: Mark Greer <[email protected]>
Signed-off-by: Jakob Koschel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/greybus/audio_codec.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/greybus/audio_codec.c b/drivers/staging/greybus/audio_codec.c
index 6ba5a34fcdf2..2e9ec3fe442b 100644
--- a/drivers/staging/greybus/audio_codec.c
+++ b/drivers/staging/greybus/audio_codec.c
@@ -622,8 +622,8 @@ static int gbcodec_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
break;
}
if (!data) {
- dev_err(dai->dev, "%s:%s DATA connection missing\n",
- dai->name, module->name);
+ dev_err(dai->dev, "%s DATA connection missing\n",
+ dai->name);
mutex_unlock(&codec->lock);
return -ENODEV;
}
--
2.35.1
From: jianghaoran <[email protected]>
[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]
ARPHRD_TUNNEL interface can't process rs packets
and will generate TX errors
ex:
ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2
ifconfig ethn x.x.x.x
ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1480
inet x.x.x.x netmask 255.255.255.255 destination x.x.x.x
inet6 fe80::5efe:ac1e:3cdb prefixlen 64 scopeid 0x20<link>
tunnel txqueuelen 1000 (IPIP Tunnel)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 3 dropped 0 overruns 0 carrier 0 collisions 0
Signed-off-by: jianghaoran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/addrconf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 09807202bd1c..0d3e76b160a5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4058,7 +4058,8 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id,
send_rs = send_mld &&
ipv6_accept_ra(ifp->idev) &&
ifp->idev->cnf.rtr_solicits != 0 &&
- (dev->flags&IFF_LOOPBACK) == 0;
+ (dev->flags & IFF_LOOPBACK) == 0 &&
+ (dev->type != ARPHRD_TUNNEL);
read_unlock_bh(&ifp->idev->lock);
/* While dad is in progress mld report's source address is in6_addrany.
--
2.35.1
From: Alexander Wetzel <[email protected]>
commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin ([email protected]) reported the kernel crash in the Gentoo forum:
https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.
Cc: [email protected]
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Alexander Wetzel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
@@ -460,8 +460,10 @@ static void rtl8180_tx(struct ieee80211_
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
+ unsigned int prio = 0;
unsigned long flags;
- unsigned int idx, prio, hw_prio;
+ unsigned int idx, hw_prio;
+
dma_addr_t mapping;
u32 tx_flags;
u8 rc_flags;
@@ -470,7 +472,9 @@ static void rtl8180_tx(struct ieee80211_
/* do arithmetic and then convert to le16 */
u16 frame_duration = 0;
- prio = skb_get_queue_mapping(skb);
+ /* rtl8180/rtl8185 only has one useable tx queue */
+ if (dev->queues > IEEE80211_AC_BK)
+ prio = skb_get_queue_mapping(skb);
ring = &priv->tx_ring[prio];
mapping = pci_map_single(priv->pdev, skb->data,
From: Yang Yingliang <[email protected]>
[ Upstream commit f8c242908ad15bbd604d3bcb54961b7d454c43f8 ]
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver")
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 7010424b2f89..80a65eaed0be 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1551,10 +1551,10 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
vop_win_init(vop);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- vop->len = resource_size(res);
vop->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(vop->regs))
return PTR_ERR(vop->regs);
+ vop->len = resource_size(res);
vop->regsbak = devm_kzalloc(dev, vop->len, GFP_KERNEL);
if (!vop->regsbak)
--
2.35.1
From: Heiko Carstens <[email protected]>
[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]
gcc 12 does not (always) optimize away code that should only be generated
if parameters are constant and within in a certain range. This depends on
various obscure kernel config options, however in particular
PROFILE_ALL_BRANCHES can trigger this compile error:
In function ‘__atomic_add_const’,
inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3:
./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’
80 | asm volatile( \
| ^~~
Workaround this by simply disabling the optimization for
PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this
optimization won't matter at all.
Reported-by: Thomas Richter <[email protected]>
Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/include/asm/preempt.h | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h
index 23a14d187fb1..1aebf09fbcd8 100644
--- a/arch/s390/include/asm/preempt.h
+++ b/arch/s390/include/asm/preempt.h
@@ -50,10 +50,17 @@ static inline bool test_preempt_need_resched(void)
static inline void __preempt_count_add(int val)
{
- if (__builtin_constant_p(val) && (val >= -128) && (val <= 127))
- __atomic_add_const(val, &S390_lowcore.preempt_count);
- else
- __atomic_add(val, &S390_lowcore.preempt_count);
+ /*
+ * With some obscure config options and CONFIG_PROFILE_ALL_BRANCHES
+ * enabled, gcc 12 fails to handle __builtin_constant_p().
+ */
+ if (!IS_ENABLED(CONFIG_PROFILE_ALL_BRANCHES)) {
+ if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) {
+ __atomic_add_const(val, &S390_lowcore.preempt_count);
+ return;
+ }
+ }
+ __atomic_add(val, &S390_lowcore.preempt_count);
}
static inline void __preempt_count_sub(int val)
--
2.35.1
From: David Howells <[email protected]>
[ Upstream commit 88e22159750b0d55793302eeed8ee603f5c1a95c ]
AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump
up the sysctl), but whilst the preallocation circular buffers have 32 slots
in them, one of them has to be a dead slot because we're using CIRC_CNT().
This means that listen(rxrpc_sock, 32) will cause an oops when the socket
is closed because rxrpc_service_prealloc_one() allocated one too many calls
and rxrpc_discard_prealloc() won't then be able to get rid of them because
it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries
to abort them, but oopses because call->peer isn't yet set.
Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match
the ring capacity.
BUG: kernel NULL pointer dereference, address: 0000000000000086
...
RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc]
Call Trace:
<TASK>
? __wake_up_common_lock+0x7a/0x90
? rxrpc_notify_socket+0x8e/0x140 [rxrpc]
? rxrpc_abort_call+0x4c/0x60 [rxrpc]
rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc]
rxrpc_release+0xc9/0x1c0 [rxrpc]
__sock_release+0x37/0xa0
sock_close+0x11/0x20
__fput+0x89/0x240
task_work_run+0x59/0x90
do_exit+0x319/0xaa0
Fixes: 00e907127e6f ("rxrpc: Preallocate peers, conns and calls for incoming service requests")
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: [email protected]
Link: https://lists.infradead.org/pipermail/linux-afs/2022-March/005079.html
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rxrpc/sysctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/rxrpc/sysctl.c b/net/rxrpc/sysctl.c
index 34c706d2f79c..f9afc21b7e2c 100644
--- a/net/rxrpc/sysctl.c
+++ b/net/rxrpc/sysctl.c
@@ -18,7 +18,7 @@ static struct ctl_table_header *rxrpc_sysctl_reg_table;
static const unsigned int zero = 0;
static const unsigned int one = 1;
static const unsigned int four = 4;
-static const unsigned int thirtytwo = 32;
+static const unsigned int max_backlog = RXRPC_BACKLOG_MAX - 1;
static const unsigned int n_65535 = 65535;
static const unsigned int n_max_acks = RXRPC_RXTX_BUFF_SIZE - 1;
@@ -114,7 +114,7 @@ static struct ctl_table rxrpc_sysctl_table[] = {
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&four,
- .extra2 = (void *)&thirtytwo,
+ .extra2 = (void *)&max_backlog,
},
{
.procname = "rx_window_size",
--
2.35.1
From: Luca Weiss <[email protected]>
[ Upstream commit 86594f6af867b5165d2ba7b5a71fae3a5961e56c ]
If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.
Avoid this null pointer derefence by skipping the call when necessary.
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/hfi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/platform/qcom/venus/hfi.c b/drivers/media/platform/qcom/venus/hfi.c
index ba29fd4d4984..7d1d3e64007c 100644
--- a/drivers/media/platform/qcom/venus/hfi.c
+++ b/drivers/media/platform/qcom/venus/hfi.c
@@ -117,6 +117,9 @@ int hfi_core_deinit(struct venus_core *core, bool blocking)
mutex_lock(&core->lock);
}
+ if (!core->ops)
+ goto unlock;
+
ret = core->ops->core_deinit(core);
if (!ret)
--
2.35.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 8b1ea69a63eb62f97cef63e6d816b64ed84e8760 ]
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes: 5720ec0a6d26 ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-ti-qspi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index d9b02e7668ae..e5db20d11e3f 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -405,6 +405,7 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
struct dma_async_tx_descriptor *tx;
int ret;
+ unsigned long time_left;
tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
if (!tx) {
@@ -424,9 +425,9 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
}
dma_async_issue_pending(chan);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
+ time_left = wait_for_completion_timeout(&qspi->transfer_complete,
msecs_to_jiffies(len));
- if (ret <= 0) {
+ if (time_left == 0) {
dmaengine_terminate_sync(chan);
dev_err(qspi->dev, "DMA wait_for_completion_timeout\n");
return -ETIMEDOUT;
--
2.35.1
From: Yang Yingliang <[email protected]>
[ Upstream commit d87ad457f7e1b8d2492ca5b1531eb35030a1cc8f ]
In pxa3xx_gcu_probe(), the sequence of error lable is wrong, it will
leads some resource leaked, so adjust the sequence to handle the error
correctly, and if pxa3xx_gcu_add_buffer() fails, pxa3xx_gcu_free_buffers()
need be called.
In pxa3xx_gcu_remove(), add missing clk_disable_unpreprare().
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/pxa3xx-gcu.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 933619da1a94..4febbe21b9b5 100644
--- a/drivers/video/fbdev/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -662,6 +662,7 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
for (i = 0; i < 8; i++) {
ret = pxa3xx_gcu_add_buffer(dev, priv);
if (ret) {
+ pxa3xx_gcu_free_buffers(dev, priv);
dev_err(dev, "failed to allocate DMA memory\n");
goto err_disable_clk;
}
@@ -677,15 +678,15 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
SHARED_SIZE, irq);
return 0;
-err_free_dma:
- dma_free_coherent(dev, SHARED_SIZE,
- priv->shared, priv->shared_phys);
+err_disable_clk:
+ clk_disable_unprepare(priv->clk);
err_misc_deregister:
misc_deregister(&priv->misc_dev);
-err_disable_clk:
- clk_disable_unprepare(priv->clk);
+err_free_dma:
+ dma_free_coherent(dev, SHARED_SIZE,
+ priv->shared, priv->shared_phys);
return ret;
}
@@ -698,6 +699,7 @@ static int pxa3xx_gcu_remove(struct platform_device *pdev)
pxa3xx_gcu_wait_idle(priv);
misc_deregister(&priv->misc_dev);
dma_free_coherent(dev, SHARED_SIZE, priv->shared, priv->shared_phys);
+ clk_disable_unprepare(priv->clk);
pxa3xx_gcu_free_buffers(dev, priv);
return 0;
--
2.35.1
On Mon, Jun 13, 2022 at 12:07:38PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.283 release.
> There are 218 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 170 pass: 170 fail: 0
Qemu test results:
total: 424 pass: 424 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Mon, 13 Jun 2022 at 15:52, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.283 release.
> There are 218 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 15 Jun 2022 09:47:08 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.283-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.14.283-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-4.14.y
* git commit: 3cf64075b816c66f6770e4ec7ca94954f1bfcab4
* git describe: v4.14.282-219-g3cf64075b816
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.282-219-g3cf64075b816
## Test Regressions (compared to v4.14.282-141-gdb03c39d5674)
No test regressions found.
## Metric Regressions (compared to v4.14.282-141-gdb03c39d5674)
No metric regressions found.
## Test Fixes (compared to v4.14.282-141-gdb03c39d5674)
No test fixes found.
## Metric Fixes (compared to v4.14.282-141-gdb03c39d5674)
No metric fixes found.
## Test result summary
total: 102185, pass: 89921, fail: 183, skip: 10568, xfail: 1513
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 293 total, 287 passed, 6 failed
* arm64: 52 total, 45 passed, 7 failed
* i386: 27 total, 23 passed, 4 failed
* mips: 22 total, 22 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 16 total, 16 passed, 0 failed
* s390: 12 total, 9 passed, 3 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 49 total, 47 passed, 2 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-cap_bounds-tests
* ltp-commands
* ltp-commands-tests
* ltp-containers
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests
* ltp-fcntl-locktests-tests
* ltp-filecaps
* ltp-filecaps-tests
* ltp-fs
* ltp-fs-tests
* ltp-fs_bind
* ltp-fs_bind-tests
* ltp-fs_perms_simple
* ltp-fs_perms_simple-tests
* ltp-fsx
* ltp-fsx-tests
* ltp-hugetlb
* ltp-hugetlb-tests
* ltp-io
* ltp-io-tests
* ltp-ipc
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty
* ltp-pty-tests
* ltp-sched
* ltp-sched-tests
* ltp-securebits
* ltp-securebits-tests
* ltp-smoke
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org