From: Peng Fan <[email protected]>
i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
reserved bit will be ignored and reading will still return 0. Although
function not broken with reserved bits set, we should not set reserved
bits.
Peng Fan (13):
arm64: dts: imx8mp-evk: correct mmc pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
Sherry Sun (1):
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 88 ++++++-------
.../freescale/imx8mp-icore-mx8mp-edimm2.2.dts | 40 +++---
.../freescale/imx8mp-phyboard-pollux-rdk.dts | 48 ++++----
.../dts/freescale/imx8mp-venice-gw74xx.dts | 116 +++++++++---------
4 files changed, 146 insertions(+), 146 deletions(-)
--
2.25.1
From: Peng Fan <[email protected]>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 5497bc2a2bff ("arm64: dts: imx8mp-evk: Add PMIC device")
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index defba22da183..510f10fc8e1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -483,8 +483,8 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0
are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Not set reserved bit.
Fixes: 43da4f92a611 ("arm64: dts: imx8mp-evk: enable usb1 as host mode")
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 0e94e10a38fe..a3195e65c742 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -529,7 +529,7 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
pinctrl_usb1_vbus: usb1grp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19
+ MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Should not set reserved bit.
Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Peng Fan <[email protected]>
---
.../dts/freescale/imx8mp-venice-gw74xx.dts | 116 +++++++++---------
1 file changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 101d31147603..521215520a0f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -622,15 +622,15 @@ &iomuxc {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */
- MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */
- MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */
- MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */
- MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */
- MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */
- MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
+ MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000150 /* PCIE1_WDIS# */
+ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
+ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
+ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@@ -639,47 +639,47 @@ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
pinctrl_accel: accelgrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x150
>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
- MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */
- MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x140 /* RST# */
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x150 /* IRQ# */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
- MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141
- MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
+ MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x140
+ MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
@@ -692,61 +692,61 @@ MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
pinctrl_gsc: gscgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x150
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
- MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2
>;
};
pinctrl_ksz: kszgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */
- MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x150 /* IRQ# */
+ MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x140 /* RST# */
>;
};
pinctrl_gpio_leds: ledgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19
- MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19
+ MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x10
+ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
@@ -758,13 +758,13 @@ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
>;
};
pinctrl_reg_wifi: regwifigrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119
+ MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
@@ -811,7 +811,7 @@ MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x140
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119
+ MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x110
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 5e4a67ff7f69 ("arm64: dts: imx8mp-evk: Add i2c3 support")
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 510f10fc8e1f..fb11c03bc8b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -490,8 +490,8 @@ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
--
2.25.1
From: Sherry Sun <[email protected]>
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in
imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should
enable the pull up, so need to set bit8 to 1. The original pinctl value
0x49 is incorrect and needs to be changed to 0x140, same as uart1 and
uart3.
Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support")
Reviewed-by: Haibo Chen <[email protected]>
Signed-off-by: Sherry Sun <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 703b03a7b90b..b2f6c1dc8104 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -522,8 +522,8 @@ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
- MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <[email protected]>
---
.../dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index cefd3d36f93f..6aa720bafe28 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -136,21 +136,21 @@ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
- MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
@@ -175,7 +175,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -187,7 +187,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -199,7 +199,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
};
--
2.25.1
From: Peng Fan <[email protected]>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Not set reserved bit.
Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support")
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 30 ++++++++++----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index fbcf554618d6..ce4556dab385 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -431,21 +431,21 @@ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10
pinctrl_fec: fecgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
- MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
- MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
According to RM bit layout, BIT3 and BIT0 are reserved.
8 7 6 5 4 3 2 1 0
PE HYS PUE ODE FSEL X DSE X
Although function is not broken, we should not set reserved bit.
Fixes: 8134822db08d ("arm64: dts: imx8mp-evk: add support for I2C5")
Signed-off-by: Peng Fan <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index ce4556dab385..defba22da183 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -497,8 +497,8 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
pinctrl_i2c5: i2c5grp {
fsl,pins = <
- MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3
- MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3
+ MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2
+ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2
>;
};
--
2.25.1
From: Peng Fan <[email protected]>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: 6f96852619d5 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Peng Fan <[email protected]>
---
.../freescale/imx8mp-phyboard-pollux-rdk.dts | 28 +++++++++----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index e34076954897..cefd3d36f93f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -116,20 +116,20 @@ &usdhc2 {
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
>;
};
--
2.25.1
On 22/06/2022 08.13, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> reserved bit will be ignored and reading will still return 0. Although
> function not broken with reserved bits set, we should not set reserved
> bits.
Thank you, these have really been bugging my while trying to bring up an
imx8mp-based board and adding the right pinmux settings - not knowing
whether there was some undocumented effect from including one of those
bits has led me astray more than once.
One question: E.g. in patch 11, you change the setting from 0x49 to
0x40, which is of course exactly what the patch description says. But
when bit 8 (PE) is not set, is there any effect from either setting of
bit 6 (PUE)? Not that I suggest changing to 0x00, but I'm just curious.
For the series:
Reviewed-by: Rasmus Villemoes <[email protected]>
From: Peng Fan <[email protected]>
BIT3 and BIT0 are reserved bits, should not touch.
Fixes: aec8ad34f7f2 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit")
Signed-off-by: Peng Fan <[email protected]>
---
.../freescale/imx8mp-icore-mx8mp-edimm2.2.dts | 40 +++++++++----------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
index 70a701a624a6..dd703b6a5e17 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -110,28 +110,28 @@ &usdhc2 {
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
- MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x10
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
- MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40
>;
};
@@ -151,7 +151,7 @@ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -163,13 +163,13 @@ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
pinctrl_reg_usb1: regusb1grp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x10
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
};
--
2.25.1
Hello,
On Wed, Jun 22, 2022 at 02:13:56PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> reserved bit will be ignored and reading will still return 0. Although
> function not broken with reserved bits set, we should not set reserved
> bits.
I wonder how you found these. Some time ago I wrote a tool for such
issues[1]. Currently it only supports i.MX25, i.MX6DL and i.MX6Q, but
extending it for the other SoCs should be only some industious effort.
Best regards
Uwe
[1] https://git.pengutronix.de/cgit/tools/dt-utils/tree/src/dtblint-imx-pinmux.c
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |
> Subject: Re: [PATCH 00/14] arm64: dts: imx8mp: correct pad settings
>
> Hello,
>
> On Wed, Jun 22, 2022 at 02:13:56PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <[email protected]>
> >
> > i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> > reserved bit will be ignored and reading will still return 0. Although
> > function not broken with reserved bits set, we should not set reserved
> > bits.
>
> I wonder how you found these. Some time ago I wrote a tool for such issues[1].
> Currently it only supports i.MX25, i.MX6DL and i.MX6Q, but extending it for
> the other SoCs should be only some industious effort.
We have customer has question about the dts pad settings in U-Boot. Since the
dts in U-Boot was synced from Linux kernel tree, and I found
the current settings in kernel dts not match with latest reference manual.
Regards,
Peng.
>
> Best regards
> Uwe
>
> [1]
> https://git.pengutronix.de/cgit/tools/dt-utils/tree/src/dtblint-imx-pinmux.c
>
>
> --
> Pengutronix e.K. | Uwe Kleine-K?nig
> |
> Industrial Linux Solutions | https://www.pengutronix.de/
> |
在 2022/6/22 14:31, Rasmus Villemoes 写道:
> On 22/06/2022 08.13, Peng Fan (OSS) wrote:
>> From: Peng Fan <[email protected]>
>>
>> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
>> reserved bit will be ignored and reading will still return 0. Although
>> function not broken with reserved bits set, we should not set reserved
>> bits.
> Thank you, these have really been bugging my while trying to bring up an
> imx8mp-based board and adding the right pinmux settings - not knowing
> whether there was some undocumented effect from including one of those
> bits has led me astray more than once.
>
> One question: E.g. in patch 11, you change the setting from 0x49 to
> 0x40, which is of course exactly what the patch description says. But
> when bit 8 (PE) is not set, is there any effect from either setting of
> bit 6 (PUE)? Not that I suggest changing to 0x00, but I'm just curious.
Set PE/PUE, it depends on board design or whether need it. Because the
previous settings not set them, I not set them also, just
not touch the reserved bits.
THanks,
Peng.
>
> For the series:
>
> Reviewed-by: Rasmus Villemoes <[email protected]>
On Wed, Jun 22, 2022 at 02:13:56PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> reserved bit will be ignored and reading will still return 0. Although
> function not broken with reserved bits set, we should not set reserved
> bits.
>
> Peng Fan (13):
> arm64: dts: imx8mp-evk: correct mmc pad settings
> arm64: dts: imx8mp-evk: correct gpio-led pad settings
> arm64: dts: imx8mp-evk: correct vbus pad settings
> arm64: dts: imx8mp-evk: correct eqos pad settings
> arm64: dts: imx8mp-evk: correct vbus pad settings
> arm64: dts: imx8mp-evk: correct I2C5 pad settings
> arm64: dts: imx8mp-evk: correct I2C1 pad settings
> arm64: dts: imx8mp-evk: correct I2C3 pad settings
> arm64: dts: imx8mp-venice-gw74xx: correct pad settings
> arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
> arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
> arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
> arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
>
> Sherry Sun (1):
> arm64: dts: imx8mp-evk: correct the uart2 pinctl value
Applied all, thanks!