This is the start of the stable review cycle for the 5.19.8 release.
There are 155 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.19.8-rc1
Fedor Pchelkin <[email protected]>
tty: n_gsm: avoid call of sleeping functions from atomic context
Fedor Pchelkin <[email protected]>
tty: n_gsm: replace kicktimer with delayed_work
Tetsuo Handa <[email protected]>
tty: n_gsm: initialize more members at gsm_alloc_mux()
Mazin Al Haddad <[email protected]>
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
Ville Syrjälä <[email protected]>
drm/i915: Skip wm/ddb readout for disabled pipes
Diego Santa Cruz <[email protected]>
drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirk
Daniele Ceraolo Spurio <[email protected]>
drm/i915/guc: clear stalled request after a reset
Jouni Högander <[email protected]>
drm/i915/backlight: Disable pps power hook for aux based backlight
Takashi Iwai <[email protected]>
ALSA: seq: Fix data-race at module auto-loading
Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix data-race for max_midi_devs access
Kacper Michajłow <[email protected]>
ALSA: hda/realtek: Add speaker AMP init for Samsung laptops with ALC298
Takashi Iwai <[email protected]>
ALSA: memalloc: Revive x86-specific WC page allocations again
Miquel Raynal <[email protected]>
net: mac802154: Fix a condition in the receive path
Sebastian Andrzej Siewior <[email protected]>
net: Use u64_stats_fetch_begin_irq() for stats fetch.
Nicolas Dichtel <[email protected]>
ip: fix triggering of 'icmp redirect'
Siddh Raman Pant <[email protected]>
wifi: mac80211: Fix UAF in ieee80211_scan_rx()
Siddh Raman Pant <[email protected]>
wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected
Isaac J. Manjarres <[email protected]>
driver core: Don't probe devices after bus_type.match() probe deferral
Levi Yun <[email protected]>
arm64/kexec: Fix missing extra range for crashkres_low.
Christian König <[email protected]>
dma-buf/dma-resv: check if the new fence is really later
Alan Stern <[email protected]>
USB: gadget: Fix obscure lockdep violation for udc_mutex
Krishna Kurapati <[email protected]>
usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
Jing Leng <[email protected]>
usb: gadget: f_uac2: fix superspeed transfer
Chunfeng Yun <[email protected]>
usb: xhci-mtk: fix bandwidth release issue
Chunfeng Yun <[email protected]>
usb: xhci-mtk: relax TT periodic bandwidth allocation
Alan Stern <[email protected]>
USB: core: Prevent nested device-reset calls
Josh Poimboeuf <[email protected]>
s390: fix nospec table alignments
Gerald Schaefer <[email protected]>
s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages
Witold Lipieta <[email protected]>
usb-storage: Add ignore-residue quirk for NXP PN7462AU
Thierry GUIBERT <[email protected]>
USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)
Pawel Laszczak <[email protected]>
usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
Pawel Laszczak <[email protected]>
usb: cdns3: fix issue with rearming ISO OUT endpoint
Heiner Kallweit <[email protected]>
usb: dwc2: fix wrong order of phy_power_on and phy_init
Badhri Jagan Sridharan <[email protected]>
usb: typec: tcpm: Return ENOTSUPP for power supply prop writes
Utkarsh Patel <[email protected]>
usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device
Pablo Sun <[email protected]>
usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles
Takashi Iwai <[email protected]>
Revert "usb: typec: ucsi: add a common function ucsi_unregister_connectors()"
Slark Xiao <[email protected]>
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
Yonglin Tan <[email protected]>
USB: serial: option: add Quectel EM060K modem
Yan Xinyu <[email protected]>
USB: serial: option: add support for OPPO R11 diag port
Johan Hovold <[email protected]>
USB: serial: cp210x: add Decagon UCA device id
Johan Hovold <[email protected]>
USB: serial: ch341: fix disabled rx timer on older devices
Johan Hovold <[email protected]>
USB: serial: ch341: fix lost character on LCR updates
Johan Hovold <[email protected]>
usb: dwc3: fix PHY disable sequence
Wesley Cheng <[email protected]>
usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
Johan Hovold <[email protected]>
usb: dwc3: disable USB core PHY management
Mathias Nyman <[email protected]>
xhci: Add grace period after xHC start to prevent premature runtime suspend.
Alan Stern <[email protected]>
media: mceusb: Use new usb_control_msg_*() routines
Heikki Krogerus <[email protected]>
usb: dwc3: pci: Add support for Intel Raptor Lake
Mika Westerberg <[email protected]>
thunderbolt: Check router generation before connecting xHCI
Mika Westerberg <[email protected]>
thunderbolt: Use the actual buffer in tb_async_error()
SeongJae Park <[email protected]>
xen-blkfront: Cache feature_persistent value before advertisement
SeongJae Park <[email protected]>
xen-blkfront: Advertise feature-persistent as user requested
SeongJae Park <[email protected]>
xen-blkback: Advertise feature-persistent as user requested
Steven Price <[email protected]>
mm: pagewalk: Fix race between unmap and page walker
Dan Carpenter <[email protected]>
xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
Nathan Chancellor <[email protected]>
powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register()
Jim Mattson <[email protected]>
KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
Sander Vanheule <[email protected]>
gpio: realtek-otto: switch to 32-bit I/O
Haibo Chen <[email protected]>
gpio: pca953x: Add mutex_lock for regcache sync in PM
Armin Wolf <[email protected]>
hwmon: (gpio-fan) Fix array out of bounds access
Stefan Wahren <[email protected]>
clk: bcm: rpi: Add missing newline
Stefan Wahren <[email protected]>
clk: bcm: rpi: Prevent out-of-bounds access
Stefan Wahren <[email protected]>
clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate
Kajol Jain <[email protected]>
powerpc/papr_scm: Fix nvdimm event mappings
Peter Robinson <[email protected]>
Input: rk805-pwrkey - fix module autoloading
Chen-Yu Tsai <[email protected]>
clk: core: Fix runtime PM sequence in clk_core_unprepare()
Stephen Boyd <[email protected]>
Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"
Chen-Yu Tsai <[email protected]>
clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops
Colin Ian King <[email protected]>
drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"
Tony Lindgren <[email protected]>
clk: ti: Fix missing of_node_get() ti_find_clock_provider()
Conor Dooley <[email protected]>
riscv: kvm: move extern sbi_ext declarations to a header
Jim Mattson <[email protected]>
KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
Enzo Matsumiya <[email protected]>
cifs: fix small mempool leak in SMB2_negotiate()
Carlos Llamas <[email protected]>
binder: fix alloc->vma_vm_mm null-ptr dereference
Carlos Llamas <[email protected]>
binder: fix UAF of ref->proc caused by race condition
Adrian Hunter <[email protected]>
mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure
Adrian Hunter <[email protected]>
mmc: core: Fix UHS-I SD 1.8V workaround branch
Mickaël Salaün <[email protected]>
landlock: Fix file reparenting without explicit LANDLOCK_ACCESS_FS_REFER
Niek Nooijens <[email protected]>
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
Russ Weight <[email protected]>
firmware_loader: Fix memory leak in firmware upload
Russ Weight <[email protected]>
firmware_loader: Fix use-after-free during unregister
Johan Hovold <[email protected]>
misc: fastrpc: fix memory corruption on open
Johan Hovold <[email protected]>
misc: fastrpc: fix memory corruption on probe
Marcus Folkesson <[email protected]>
iio: adc: mcp3911: use correct formula for AD conversion
Marcus Folkesson <[email protected]>
iio: adc: mcp3911: correct "microchip,device-addr" property
Matti Vaittinen <[email protected]>
iio: ad7292: Prevent regulator double disable
Christophe JAILLET <[email protected]>
iio: light: cm3605: Fix an error handling path in cm3605_probe()
Tetsuo Handa <[email protected]>
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
Sherry Sun <[email protected]>
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
Arnd Bergmann <[email protected]>
musb: fix USB_MUSB_TUSB6010 dependency
Helge Deller <[email protected]>
vt: Clear selection before changing the font
Michael Ellerman <[email protected]>
powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
Masahiro Yamada <[email protected]>
powerpc: align syscall table for ppc32
Michael Ellerman <[email protected]>
Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"
Grzegorz Szymaszek <[email protected]>
staging: r8188eu: add firmware dependency
Larry Finger <[email protected]>
staging: r8188eu: Add Rosewill USB-N150 Nano to device tables
Dan Carpenter <[email protected]>
staging: rtl8712: fix use after free bugs
Sergiu Moga <[email protected]>
tty: serial: atmel: Preserve previous USART mode if RS485 disabled
Shenwei Wang <[email protected]>
serial: fsl_lpuart: RS485 RTS polariy is inverse
Vadim Pasternak <[email protected]>
platform/mellanox: mlxreg-lc: Fix locking issue
Vadim Pasternak <[email protected]>
platform/mellanox: mlxreg-lc: Fix coverity warning
Waiman Long <[email protected]>
mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock
Srinivas Kandagatla <[email protected]>
soundwire: qcom: fix device status array range
Yacan Liu <[email protected]>
net/smc: Remove redundant refcount increase
Jakub Kicinski <[email protected]>
Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb"
Eric Dumazet <[email protected]>
tcp: annotate data-race around challenge_timestamp
Toke Høiland-Jørgensen <[email protected]>
sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb
Cong Wang <[email protected]>
kcm: fix strp_init() order and cleanup
David Thompson <[email protected]>
mlxbf_gige: compute MDIO period based on i1clk
Xin Yin <[email protected]>
cachefiles: make on-demand request distribution fairer
Sun Ke <[email protected]>
cachefiles: fix error return code in cachefiles_ondemand_copen()
Duoming Zhou <[email protected]>
ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler
Dan Carpenter <[email protected]>
net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()
Horatiu Vultur <[email protected]>
net: phy: micrel: Make the GPIO to be non-exclusive
Wang Hai <[email protected]>
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
Zhengchao Shao <[email protected]>
net: sched: tbf: don't call qdisc_put() while holding tree lock
Łukasz Bartosik <[email protected]>
drm/i915: fix null pointer dereference
Sebastian Andrzej Siewior <[email protected]>
net: dsa: xrs700x: Use irqsave variant for u64 stats update
Tianyu Yuan <[email protected]>
nfp: flower: fix ingress police using matchall filter
Andrey Zhadchenko <[email protected]>
openvswitch: fix memory leak at failed datapath creation
Florian Fainelli <[email protected]>
net: smsc911x: Stop and start PHY during suspend and resume
Casper Andersson <[email protected]>
net: sparx5: fix handling uneven length packets in manual extraction
Zhengping Jiang <[email protected]>
Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn
Archie Pusaka <[email protected]>
Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt
Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_sync: Fix suspend performance regression
Hans de Goede <[email protected]>
Bluetooth: hci_event: Fix vendor (unknown) opcode status handling
Kumar Kartikeya Dwivedi <[email protected]>
bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO
Joanne Koong <[email protected]>
bpf: Tidy up verifier check_func_arg()
Maxim Mikityanskiy <[email protected]>
bpf: Allow helpers to accept pointers with a fixed size
Mathias Nyman <[email protected]>
Revert "xhci: turn off port power in shutdown"
Mathias Nyman <[email protected]>
xhci: Fix null pointer dereference in remove if xHC has only one roothub
Dan Carpenter <[email protected]>
wifi: cfg80211: debugfs: fix return type in ht40allow_map_read()
Peter Ujfalusi <[email protected]>
ALSA: hda: intel-nhlt: Correct the handling of fmt_config flexible array
Arun R Murthy <[email protected]>
drm/i915/display: avoid warnings when registering dual panel backlight
Matthew Auld <[email protected]>
drm/i915/ttm: fix CCS handling
Kuniyuki Iwashima <[email protected]>
bpf: Fix a data-race around bpf_jit_limit.
Lin Ma <[email protected]>
ieee802154/adf7242: defer destroy_workqueue call
Alex Williamson <[email protected]>
drm/i915/gvt: Fix Comet Lake
Pu Lehui <[email protected]>
bpf, cgroup: Fix kernel BUG in purge_effective_progs
Eyal Birger <[email protected]>
ip_tunnel: Respect tunnel key's "flow_flags" in IP tunnels
YiFei Zhu <[email protected]>
bpf: Restrict bpf_sys_bpf to CAP_PERFMON
Liu Jian <[email protected]>
skmsg: Fix wrong last sg check in sk_msg_recvmsg()
Marcus Folkesson <[email protected]>
iio: adc: mcp3911: make use of the sign bit
Lv Ruyi <[email protected]>
peci: aspeed: fix error check return value of platform_get_irq()
Bjorn Andersson <[email protected]>
drm/msm/gpu: Drop qos request if devm_devfreq_add_device() fails
Magnus Karlsson <[email protected]>
xsk: Fix corrupted packets for XDP_SHARED_UMEM
Hans de Goede <[email protected]>
platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
Andy Shevchenko <[email protected]>
platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask
Douglas Anderson <[email protected]>
drm/msm/dsi: Fix number of regulators for SDM660
Douglas Anderson <[email protected]>
drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg
Kuogee Hsieh <[email protected]>
drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4
Abhinav Kumar <[email protected]>
drm/msm/dpu: populate wb or intf before reset_intf_cfg
sunliming <[email protected]>
drm/msm/dsi: fix the inconsistent indenting
Kuogee Hsieh <[email protected]>
drm/msm/dp: make eDP panel as the first connected connector
-------------
Diffstat:
Makefile | 4 +-
arch/arm64/kernel/machine_kexec_file.c | 2 +-
arch/powerpc/include/asm/firmware.h | 8 +
arch/powerpc/kernel/rtas_entry.S | 4 +
arch/powerpc/kernel/systbl.S | 1 +
arch/powerpc/platforms/pseries/papr_scm.c | 90 ++++-------
arch/riscv/include/asm/kvm_vcpu_sbi.h | 12 ++
arch/riscv/kvm/vcpu_sbi.c | 12 +-
arch/riscv/mm/pageattr.c | 4 +-
arch/s390/include/asm/hugetlb.h | 6 +-
arch/s390/kernel/vmlinux.lds.S | 1 +
arch/x86/kvm/vmx/vmx.c | 3 +-
arch/x86/kvm/x86.c | 25 +++-
drivers/android/binder.c | 12 ++
drivers/android/binder_alloc.c | 4 +-
drivers/base/dd.c | 10 ++
drivers/base/firmware_loader/sysfs.c | 7 +-
drivers/base/firmware_loader/sysfs.h | 5 +
drivers/base/firmware_loader/sysfs_upload.c | 12 +-
drivers/block/xen-blkback/common.h | 3 +
drivers/block/xen-blkback/xenbus.c | 6 +-
drivers/block/xen-blkfront.c | 20 ++-
drivers/clk/bcm/clk-raspberrypi.c | 15 +-
drivers/clk/clk.c | 3 +-
drivers/clk/ti/clk.c | 1 +
drivers/dma-buf/dma-resv.c | 3 +-
drivers/gpio/gpio-pca953x.c | 8 +-
drivers/gpio/gpio-realtek-otto.c | 166 +++++++++++----------
drivers/gpu/drm/i915/display/intel_backlight.c | 37 ++---
drivers/gpu/drm/i915/display/intel_bw.c | 16 +-
drivers/gpu/drm/i915/display/intel_dp.c | 2 -
drivers/gpu/drm/i915/display/intel_quirks.c | 3 +
drivers/gpu/drm/i915/gt/intel_migrate.c | 44 +++---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 7 +
drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
drivers/gpu/drm/i915/intel_gvt_mmio_table.c | 3 +-
drivers/gpu/drm/i915/intel_pm.c | 8 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 6 +
drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +-
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +-
drivers/gpu/drm/msm/msm_drv.c | 2 +
drivers/gpu/drm/msm/msm_gpu_devfreq.c | 2 +
drivers/hwmon/gpio-fan.c | 3 +
drivers/iio/adc/ad7292.c | 4 +-
drivers/iio/adc/mcp3911.c | 28 +++-
drivers/iio/light/cm3605.c | 6 +-
drivers/input/joystick/iforce/iforce-serio.c | 6 +-
drivers/input/joystick/iforce/iforce-usb.c | 8 +-
drivers/input/joystick/iforce/iforce.h | 6 +
drivers/input/misc/rk805-pwrkey.c | 1 +
drivers/media/rc/mceusb.c | 35 ++---
drivers/misc/fastrpc.c | 12 +-
drivers/mmc/core/sd.c | 46 +++---
drivers/net/dsa/xrs700x/xrs700x.c | 5 +-
drivers/net/ethernet/cortina/gemini.c | 24 +--
drivers/net/ethernet/fungible/funeth/funeth_txrx.h | 4 +-
drivers/net/ethernet/google/gve/gve_ethtool.c | 16 +-
drivers/net/ethernet/google/gve/gve_main.c | 12 +-
drivers/net/ethernet/huawei/hinic/hinic_rx.c | 4 +-
drivers/net/ethernet/huawei/hinic/hinic_tx.c | 4 +-
.../net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h | 4 +-
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c | 122 ++++++++++++---
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h | 2 +
.../net/ethernet/mellanox/mlxsw/spectrum_span.c | 3 +-
.../net/ethernet/microchip/lan966x/lan966x_fdma.c | 5 +-
.../net/ethernet/microchip/sparx5/sparx5_packet.c | 2 +
.../net/ethernet/netronome/nfp/flower/qos_conf.c | 5 +-
.../net/ethernet/netronome/nfp/nfp_net_common.c | 8 +-
.../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 8 +-
drivers/net/ethernet/rocker/rocker_ofdpa.c | 2 +-
drivers/net/ethernet/smsc/smsc911x.c | 6 +
drivers/net/ieee802154/adf7242.c | 3 +-
drivers/net/netdevsim/netdev.c | 4 +-
drivers/net/phy/micrel.c | 8 +-
drivers/peci/controller/peci-aspeed.c | 2 +-
drivers/platform/mellanox/mlxreg-lc.c | 38 +++--
drivers/platform/x86/pmc_atom.c | 2 +-
drivers/platform/x86/x86-android-tablets.c | 14 ++
drivers/soundwire/qcom.c | 6 +-
drivers/staging/r8188eu/os_dep/os_intfs.c | 1 +
drivers/staging/r8188eu/os_dep/usb_intf.c | 1 +
drivers/staging/rtl8712/rtl8712_cmd.c | 36 -----
drivers/thunderbolt/ctl.c | 2 +-
drivers/thunderbolt/switch.c | 6 +-
drivers/tty/n_gsm.c | 85 +++++------
drivers/tty/serial/atmel_serial.c | 4 +-
drivers/tty/serial/fsl_lpuart.c | 5 +-
drivers/tty/vt/vt.c | 12 +-
drivers/usb/cdns3/cdns3-gadget.c | 4 +-
drivers/usb/class/cdc-acm.c | 3 +
drivers/usb/core/hub.c | 10 ++
drivers/usb/dwc2/platform.c | 8 +-
drivers/usb/dwc3/core.c | 19 +--
drivers/usb/dwc3/dwc3-pci.c | 4 +
drivers/usb/dwc3/gadget.c | 8 +-
drivers/usb/dwc3/host.c | 10 ++
drivers/usb/gadget/function/f_uac2.c | 16 +-
drivers/usb/gadget/function/storage_common.c | 6 +-
drivers/usb/gadget/udc/core.c | 26 ++--
drivers/usb/host/xhci-hub.c | 13 +-
drivers/usb/host/xhci-mtk-sch.c | 15 +-
drivers/usb/host/xhci-plat.c | 11 +-
drivers/usb/host/xhci.c | 19 +--
drivers/usb/host/xhci.h | 4 +-
drivers/usb/musb/Kconfig | 2 +-
drivers/usb/serial/ch341.c | 16 +-
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 6 +
drivers/usb/serial/option.c | 15 ++
drivers/usb/storage/unusual_devs.h | 7 +
drivers/usb/typec/altmodes/displayport.c | 4 +-
drivers/usb/typec/mux/intel_pmc_mux.c | 9 +-
drivers/usb/typec/tcpm/tcpm.c | 7 +
drivers/usb/typec/ucsi/ucsi.c | 53 +++----
drivers/xen/grant-table.c | 3 +
fs/cachefiles/internal.h | 1 +
fs/cachefiles/ondemand.c | 22 ++-
fs/cifs/smb2pdu.c | 12 +-
include/linux/bpf.h | 13 ++
include/linux/platform_data/x86/pmc_atom.h | 6 +-
include/linux/usb.h | 2 +
include/linux/usb/typec_dp.h | 5 +
include/net/ip_tunnels.h | 4 +-
kernel/bpf/cgroup.c | 4 +-
kernel/bpf/core.c | 2 +-
kernel/bpf/syscall.c | 2 +-
kernel/bpf/verifier.c | 112 +++++++++-----
mm/pagewalk.c | 21 +--
mm/ptdump.c | 4 +-
mm/slab_common.c | 45 ++++--
net/bluetooth/hci_event.c | 13 +-
net/bluetooth/hci_sync.c | 30 ++--
net/core/skmsg.c | 4 +-
net/ipv4/fib_frontend.c | 4 +-
net/ipv4/ip_gre.c | 2 +-
net/ipv4/ip_tunnel.c | 7 +-
net/ipv4/tcp_input.c | 4 +-
net/kcm/kcmsock.c | 15 +-
net/mac80211/ibss.c | 4 +
net/mac80211/scan.c | 11 +-
net/mac80211/sta_info.c | 8 +-
net/mac802154/rx.c | 2 +-
net/mpls/af_mpls.c | 4 +-
net/openvswitch/datapath.c | 4 +-
net/sched/sch_generic.c | 31 ++--
net/sched/sch_tbf.c | 4 +-
net/smc/af_smc.c | 1 -
net/wireless/debugfs.c | 3 +-
net/xdp/xsk_buff_pool.c | 16 +-
security/landlock/fs.c | 48 +++---
sound/core/memalloc.c | 87 +++++++++--
sound/core/seq/oss/seq_oss_midi.c | 2 +
sound/core/seq/seq_clientmgr.c | 12 +-
sound/hda/intel-nhlt.c | 8 +-
sound/pci/hda/patch_realtek.c | 63 +++++++-
tools/testing/selftests/landlock/fs_test.c | 155 +++++++++++++++++--
158 files changed, 1492 insertions(+), 813 deletions(-)
From: Douglas Anderson <[email protected]>
[ Upstream commit 1e00d6ac8a3422765bae37aeac2002dfd3c0bda6 ]
3 regulators are listed but the number 2 is specified. Fix it.
Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/496318/
Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 2c23324a2296b..02000a7b7a18c 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -109,7 +109,7 @@ static const char * const dsi_8996_bus_clk_names[] = {
static const struct msm_dsi_config msm8996_dsi_cfg = {
.io_offset = DSI_6G_REG_SHIFT,
.reg_cfg = {
- .num = 2,
+ .num = 3,
.regs = {
{"vdda", 18160, 1 }, /* 1.25 V */
{"vcca", 17000, 32 }, /* 0.925 V */
--
2.35.1
From: Alan Stern <[email protected]>
commit 1016fc0c096c92dd0e6e0541daac7a7868169903 upstream.
A recent commit expanding the scope of the udc_lock mutex in the
gadget core managed to cause an obscure and slightly bizarre lockdep
violation. In abbreviated form:
======================================================
WARNING: possible circular locking dependency detected
5.19.0-rc7+ #12510 Not tainted
------------------------------------------------------
udevadm/312 is trying to acquire lock:
ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0
but task is already holding lock:
ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kn->active#4){++++}-{0:0}:
lock_acquire+0x68/0x84
__kernfs_remove+0x268/0x380
kernfs_remove_by_name_ns+0x58/0xac
sysfs_remove_file_ns+0x18/0x24
device_del+0x15c/0x440
-> #2 (device_links_lock){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
device_link_remove+0x3c/0xa0
_regulator_put.part.0+0x168/0x190
regulator_put+0x3c/0x54
devm_regulator_release+0x14/0x20
-> #1 (regulator_list_mutex){+.+.}-{3:3}:
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
regulator_lock_dependent+0x54/0x284
regulator_enable+0x34/0x80
phy_power_on+0x24/0x130
__dwc2_lowlevel_hw_enable+0x100/0x130
dwc2_lowlevel_hw_enable+0x18/0x40
dwc2_hsotg_udc_start+0x6c/0x2f0
gadget_bind_driver+0x124/0x1f4
-> #0 (udc_lock){+.+.}-{3:3}:
__lock_acquire+0x1298/0x20cc
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x68/0x84
__mutex_lock+0x9c/0x430
mutex_lock_nested+0x38/0x64
usb_udc_uevent+0x54/0xe0
Evidently this was caused by the scope of udc_mutex being too large.
The mutex is only meant to protect udc->driver along with a few other
things. As far as I can tell, there's no reason for the mutex to be
held while the gadget core calls a gadget driver's ->bind or ->unbind
routine, or while a UDC is being started or stopped. (This accounts
for link #1 in the chain above, where the mutex is held while the
dwc2_hsotg_udc is started as part of driver probing.)
Gadget drivers' ->disconnect callbacks are problematic. Even though
usb_gadget_disconnect() will now acquire the udc_mutex, there's a
window in usb_gadget_bind_driver() between the times when the mutex is
released and the ->bind callback is invoked. If a disconnect occurred
during that window, we could call the driver's ->disconnect routine
before its ->bind routine. To prevent this from happening, it will be
necessary to prevent a UDC from connecting while it has no gadget
driver. This should be done already but it doesn't seem to be;
currently usb_gadget_connect() has no check for this. Such a check
will have to be added later.
Some degree of mutual exclusion is required in soft_connect_store(),
which can dereference udc->driver at arbitrary times since it is a
sysfs callback. The solution here is to acquire the gadget's device
lock rather than the udc_mutex. Since the driver core guarantees that
the device lock is always held during driver binding and unbinding,
this will make the accesses in soft_connect_store() mutually exclusive
with any changes to udc->driver.
Lastly, it turns out there is one place which should hold the
udc_mutex but currently does not: The function_show() routine needs
protection while it dereferences udc->driver. The missing lock and
unlock calls are added.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 2191c00855b0 ("USB: gadget: Fix use-after-free Read in usb_udc_uevent()")
Cc: Felipe Balbi <[email protected]>
Cc: [email protected]
Reported-by: Marek Szyprowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/YwkfhdxA/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/core.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -736,7 +736,10 @@ int usb_gadget_disconnect(struct usb_gad
ret = gadget->ops->pullup(gadget, 0);
if (!ret) {
gadget->connected = 0;
- gadget->udc->driver->disconnect(gadget);
+ mutex_lock(&udc_lock);
+ if (gadget->udc->driver)
+ gadget->udc->driver->disconnect(gadget);
+ mutex_unlock(&udc_lock);
}
out:
@@ -1489,7 +1492,6 @@ static int gadget_bind_driver(struct dev
usb_gadget_udc_set_speed(udc, driver->max_speed);
- mutex_lock(&udc_lock);
ret = driver->bind(udc->gadget, driver);
if (ret)
goto err_bind;
@@ -1499,7 +1501,6 @@ static int gadget_bind_driver(struct dev
goto err_start;
usb_gadget_enable_async_callbacks(udc);
usb_udc_connect_control(udc);
- mutex_unlock(&udc_lock);
kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
return 0;
@@ -1512,6 +1513,7 @@ static int gadget_bind_driver(struct dev
dev_err(&udc->dev, "failed to start %s: %d\n",
driver->function, ret);
+ mutex_lock(&udc_lock);
udc->driver = NULL;
driver->is_bound = false;
mutex_unlock(&udc_lock);
@@ -1529,7 +1531,6 @@ static void gadget_unbind_driver(struct
kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
- mutex_lock(&udc_lock);
usb_gadget_disconnect(gadget);
usb_gadget_disable_async_callbacks(udc);
if (gadget->irq)
@@ -1537,6 +1538,7 @@ static void gadget_unbind_driver(struct
udc->driver->unbind(gadget);
usb_gadget_udc_stop(udc);
+ mutex_lock(&udc_lock);
driver->is_bound = false;
udc->driver = NULL;
mutex_unlock(&udc_lock);
@@ -1612,7 +1614,7 @@ static ssize_t soft_connect_store(struct
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
ssize_t ret;
- mutex_lock(&udc_lock);
+ device_lock(&udc->gadget->dev);
if (!udc->driver) {
dev_err(dev, "soft-connect without a gadget driver\n");
ret = -EOPNOTSUPP;
@@ -1633,7 +1635,7 @@ static ssize_t soft_connect_store(struct
ret = n;
out:
- mutex_unlock(&udc_lock);
+ device_unlock(&udc->gadget->dev);
return ret;
}
static DEVICE_ATTR_WO(soft_connect);
@@ -1652,11 +1654,15 @@ static ssize_t function_show(struct devi
char *buf)
{
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
- struct usb_gadget_driver *drv = udc->driver;
+ struct usb_gadget_driver *drv;
+ int rc = 0;
- if (!drv || !drv->function)
- return 0;
- return scnprintf(buf, PAGE_SIZE, "%s\n", drv->function);
+ mutex_lock(&udc_lock);
+ drv = udc->driver;
+ if (drv && drv->function)
+ rc = scnprintf(buf, PAGE_SIZE, "%s\n", drv->function);
+ mutex_unlock(&udc_lock);
+ return rc;
}
static DEVICE_ATTR_RO(function);
From: Fedor Pchelkin <[email protected]>
commit 902e02ea9385373ce4b142576eef41c642703955 upstream.
Syzkaller reports the following problem:
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2347
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1105, name: syz-executor423
3 locks held by syz-executor423/1105:
#0: ffff8881468b9098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x90 drivers/tty/tty_ldisc.c:266
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: tty_write_lock drivers/tty/tty_io.c:952 [inline]
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: do_tty_write drivers/tty/tty_io.c:975 [inline]
#1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: file_tty_write.constprop.0+0x2a8/0x8e0 drivers/tty/tty_io.c:1118
#2: ffff88801b06c398 (&gsm->tx_lock){....}-{2:2}, at: gsmld_write+0x5e/0x150 drivers/tty/n_gsm.c:2717
irq event stamp: 3482
hardirqs last enabled at (3481): [<ffffffff81d13343>] __get_reqs_available+0x143/0x2f0 fs/aio.c:946
hardirqs last disabled at (3482): [<ffffffff87d39722>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (3482): [<ffffffff87d39722>] _raw_spin_lock_irqsave+0x52/0x60 kernel/locking/spinlock.c:159
softirqs last enabled at (3408): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
softirqs last disabled at (3401): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 PID: 1105 Comm: syz-executor423 Not tainted 5.10.137-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167 lib/dump_stack.c:118
___might_sleep.cold+0x1e8/0x22e kernel/sched/core.c:7304
console_lock+0x19/0x80 kernel/printk/printk.c:2347
do_con_write+0x113/0x1de0 drivers/tty/vt/vt.c:2909
con_write+0x22/0xc0 drivers/tty/vt/vt.c:3296
gsmld_write+0xd0/0x150 drivers/tty/n_gsm.c:2720
do_tty_write drivers/tty/tty_io.c:1028 [inline]
file_tty_write.constprop.0+0x502/0x8e0 drivers/tty/tty_io.c:1118
call_write_iter include/linux/fs.h:1903 [inline]
aio_write+0x355/0x7b0 fs/aio.c:1580
__io_submit_one fs/aio.c:1952 [inline]
io_submit_one+0xf45/0x1a90 fs/aio.c:1999
__do_sys_io_submit fs/aio.c:2058 [inline]
__se_sys_io_submit fs/aio.c:2028 [inline]
__x64_sys_io_submit+0x18c/0x2f0 fs/aio.c:2028
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x61/0xc6
The problem happens in the following control flow:
gsmld_write(...)
spin_lock_irqsave(&gsm->tx_lock, flags) // taken a spinlock on TX data
con_write(...)
do_con_write(...)
console_lock()
might_sleep() // -> bug
As far as console_lock() might sleep it should not be called with
spinlock held.
The patch replaces tx_lock spinlock with mutex in order to avoid the
problem.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 32dd59f96924 ("tty: n_gsm: fix race condition in gsmld_write()")
Cc: stable <[email protected]>
Signed-off-by: Fedor Pchelkin <[email protected]>
Signed-off-by: Alexey Khoroshilov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/n_gsm.c | 53 +++++++++++++++++++++++-----------------------------
1 file changed, 24 insertions(+), 29 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -248,7 +248,7 @@ struct gsm_mux {
bool constipated; /* Asked by remote to shut up */
bool has_devices; /* Devices were registered */
- spinlock_t tx_lock;
+ struct mutex tx_mutex;
unsigned int tx_bytes; /* TX data outstanding */
#define TX_THRESH_HI 8192
#define TX_THRESH_LO 2048
@@ -680,7 +680,6 @@ static int gsm_send(struct gsm_mux *gsm,
struct gsm_msg *msg;
u8 *dp;
int ocr;
- unsigned long flags;
msg = gsm_data_alloc(gsm, addr, 0, control);
if (!msg)
@@ -702,10 +701,10 @@ static int gsm_send(struct gsm_mux *gsm,
gsm_print_packet("Q->", addr, cr, control, NULL, 0);
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
list_add_tail(&msg->list, &gsm->tx_ctrl_list);
gsm->tx_bytes += msg->len;
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
gsmld_write_trigger(gsm);
return 0;
@@ -730,7 +729,7 @@ static void gsm_dlci_clear_queues(struct
spin_unlock_irqrestore(&dlci->lock, flags);
/* Clear data packets in MUX write queue */
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
if (msg->addr != addr)
continue;
@@ -738,7 +737,7 @@ static void gsm_dlci_clear_queues(struct
list_del(&msg->list);
kfree(msg);
}
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
}
/**
@@ -1024,10 +1023,9 @@ static void __gsm_data_queue(struct gsm_
static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
{
- unsigned long flags;
- spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
+ mutex_lock(&dlci->gsm->tx_mutex);
__gsm_data_queue(dlci, msg);
- spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
+ mutex_unlock(&dlci->gsm->tx_mutex);
}
/**
@@ -1039,7 +1037,7 @@ static void gsm_data_queue(struct gsm_dl
* is data. Keep to the MRU of the mux. This path handles the usual tty
* interface which is a byte stream with optional modem data.
*
- * Caller must hold the tx_lock of the mux.
+ * Caller must hold the tx_mutex of the mux.
*/
static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
@@ -1099,7 +1097,7 @@ static int gsm_dlci_data_output(struct g
* is data. Keep to the MRU of the mux. This path handles framed data
* queued as skbuffs to the DLCI.
*
- * Caller must hold the tx_lock of the mux.
+ * Caller must hold the tx_mutex of the mux.
*/
static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
@@ -1115,7 +1113,7 @@ static int gsm_dlci_data_output_framed(s
if (dlci->adaption == 4)
overhead = 1;
- /* dlci->skb is locked by tx_lock */
+ /* dlci->skb is locked by tx_mutex */
if (dlci->skb == NULL) {
dlci->skb = skb_dequeue_tail(&dlci->skb_list);
if (dlci->skb == NULL)
@@ -1169,7 +1167,7 @@ static int gsm_dlci_data_output_framed(s
* Push an empty frame in to the transmit queue to update the modem status
* bits and to transmit an optional break.
*
- * Caller must hold the tx_lock of the mux.
+ * Caller must hold the tx_mutex of the mux.
*/
static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
@@ -1283,13 +1281,12 @@ static int gsm_dlci_data_sweep(struct gs
static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
{
- unsigned long flags;
int sweep;
if (dlci->constipated)
return;
- spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
+ mutex_lock(&dlci->gsm->tx_mutex);
/* If we have nothing running then we need to fire up */
sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
if (dlci->gsm->tx_bytes == 0) {
@@ -1300,7 +1297,7 @@ static void gsm_dlci_data_kick(struct gs
}
if (sweep)
gsm_dlci_data_sweep(dlci->gsm);
- spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
+ mutex_unlock(&dlci->gsm->tx_mutex);
}
/*
@@ -1994,14 +1991,13 @@ static void gsm_dlci_command(struct gsm_
static void gsm_kick_timeout(struct work_struct *work)
{
struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work);
- unsigned long flags;
int sent = 0;
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
/* If we have nothing running then we need to fire up */
if (gsm->tx_bytes < TX_THRESH_LO)
sent = gsm_dlci_data_sweep(gsm);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
if (sent && debug & 4)
pr_info("%s TX queue stalled\n", __func__);
@@ -2531,6 +2527,7 @@ static void gsm_free_mux(struct gsm_mux
break;
}
}
+ mutex_destroy(&gsm->tx_mutex);
mutex_destroy(&gsm->mutex);
kfree(gsm->txframe);
kfree(gsm->buf);
@@ -2602,6 +2599,7 @@ static struct gsm_mux *gsm_alloc_mux(voi
}
spin_lock_init(&gsm->lock);
mutex_init(&gsm->mutex);
+ mutex_init(&gsm->tx_mutex);
kref_init(&gsm->ref);
INIT_LIST_HEAD(&gsm->tx_ctrl_list);
INIT_LIST_HEAD(&gsm->tx_data_list);
@@ -2610,7 +2608,6 @@ static struct gsm_mux *gsm_alloc_mux(voi
INIT_WORK(&gsm->tx_work, gsmld_write_task);
init_waitqueue_head(&gsm->event);
spin_lock_init(&gsm->control_lock);
- spin_lock_init(&gsm->tx_lock);
gsm->t1 = T1;
gsm->t2 = T2;
@@ -2635,6 +2632,7 @@ static struct gsm_mux *gsm_alloc_mux(voi
}
spin_unlock(&gsm_mux_lock);
if (i == MAX_MUX) {
+ mutex_destroy(&gsm->tx_mutex);
mutex_destroy(&gsm->mutex);
kfree(gsm->txframe);
kfree(gsm->buf);
@@ -2790,17 +2788,16 @@ static void gsmld_write_trigger(struct g
static void gsmld_write_task(struct work_struct *work)
{
struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work);
- unsigned long flags;
int i, ret;
/* All outstanding control channel and control messages and one data
* frame is sent.
*/
ret = -ENODEV;
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
if (gsm->tty)
ret = gsm_data_kick(gsm);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
if (ret >= 0)
for (i = 0; i < NUM_DLCI; i++)
@@ -3008,7 +3005,6 @@ static ssize_t gsmld_write(struct tty_st
const unsigned char *buf, size_t nr)
{
struct gsm_mux *gsm = tty->disc_data;
- unsigned long flags;
int space;
int ret;
@@ -3016,13 +3012,13 @@ static ssize_t gsmld_write(struct tty_st
return -ENODEV;
ret = -ENOBUFS;
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
space = tty_write_room(tty);
if (space >= nr)
ret = tty->ops->write(tty, buf, nr);
else
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
return ret;
}
@@ -3319,14 +3315,13 @@ static struct tty_ldisc_ops tty_ldisc_pa
static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk)
{
struct gsm_mux *gsm = dlci->gsm;
- unsigned long flags;
if (dlci->state != DLCI_OPEN || dlci->adaption != 2)
return;
- spin_lock_irqsave(&gsm->tx_lock, flags);
+ mutex_lock(&gsm->tx_mutex);
gsm_dlci_modem_output(gsm, dlci, brk);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ mutex_unlock(&gsm->tx_mutex);
}
/**
From: Zhengping Jiang <[email protected]>
[ Upstream commit 2da8eb834b775a9d1acea6214d3e4a78ac841e6e ]
When disconnecting all devices, hci_conn_failed is used to cleanup
hci_conn object when the hci_conn object cannot be aborted.
The function hci_conn_failed requires the caller holds hdev->lock.
Fixes: 9b3628d79b46f ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Zhengping Jiang <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_sync.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 2012f23158839..3b4cee67bbd60 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4452,9 +4452,11 @@ static int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn,
/* Cleanup hci_conn object if it cannot be cancelled as it
* likelly means the controller and host stack are out of sync.
*/
- if (err)
+ if (err) {
+ hci_dev_lock(hdev);
hci_conn_failed(conn, err);
-
+ hci_dev_unlock(hdev);
+ }
return err;
case BT_CONNECT2:
return hci_reject_conn_sync(hdev, conn, reason);
--
2.35.1
From: Larry Finger <[email protected]>
commit e01f5c8d6af231b3b09e23c1fe8a4057cdcc4e42 upstream.
This device is reported as using the RTL8188EUS chip.
It has the improbable USB ID of 0bda:ffef, which normally would belong
to Realtek, but this ID works for the reporter.
Signed-off-by: Larry Finger <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/r8188eu/os_dep/usb_intf.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/r8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/r8188eu/os_dep/usb_intf.c
@@ -28,6 +28,7 @@ static struct usb_device_id rtw_usb_id_t
/*=== Realtek demoboard ===*/
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8179)}, /* 8188EUS */
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
+ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill USB-N150 Nano */
/*=== Customer ID ===*/
/****** 8188EUS ********/
{USB_DEVICE(0x07B8, 0x8179)}, /* Abocom - Abocom */
From: Marcus Folkesson <[email protected]>
[ Upstream commit 8f89e33bf040bbef66386c426198622180233178 ]
The device supports negative values as well.
Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/mcp3911.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 1cb4590fe4125..f581cefb67195 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -113,6 +113,8 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
if (ret)
goto out;
+ *val = sign_extend32(*val, 23);
+
ret = IIO_VAL_INT;
break;
--
2.35.1
From: Takashi Iwai <[email protected]>
commit 22dec134dbfa825b963f8a1807ad19b943e46a56 upstream.
ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field. Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.
OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.
Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.
Reported-by: Abhishek Shah <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/oss/seq_oss_midi.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/core/seq/oss/seq_oss_midi.c
+++ b/sound/core/seq/oss/seq_oss_midi.c
@@ -270,7 +270,9 @@ snd_seq_oss_midi_clear_all(void)
void
snd_seq_oss_midi_setup(struct seq_oss_devinfo *dp)
{
+ spin_lock_irq(®ister_lock);
dp->max_mididev = max_midi_devs;
+ spin_unlock_irq(®ister_lock);
}
/*
From: Siddh Raman Pant <[email protected]>
commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c upstream.
ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.
Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().
Cc: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: [email protected]
Suggested-by: Johannes Berg <[email protected]>
Signed-off-by: Siddh Raman Pant <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/scan.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -465,16 +465,19 @@ static void __ieee80211_scan_completed(s
scan_req = rcu_dereference_protected(local->scan_req,
lockdep_is_held(&local->mtx));
- if (scan_req != local->int_scan_req) {
- local->scan_info.aborted = aborted;
- cfg80211_scan_done(scan_req, &local->scan_info);
- }
RCU_INIT_POINTER(local->scan_req, NULL);
RCU_INIT_POINTER(local->scan_sdata, NULL);
local->scanning = 0;
local->scan_chandef.chan = NULL;
+ synchronize_rcu();
+
+ if (scan_req != local->int_scan_req) {
+ local->scan_info.aborted = aborted;
+ cfg80211_scan_done(scan_req, &local->scan_info);
+ }
+
/* Set power back to normal operating levels. */
ieee80211_hw_config(local, 0);
From: Krishna Kurapati <[email protected]>
commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream.
During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.
When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.
Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices")
Cc: [email protected]
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Krishna Kurapati <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/storage_common.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -294,8 +294,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub);
void store_cdrom_address(u8 *dest, int msf, u32 addr)
{
if (msf) {
- /* Convert to Minutes-Seconds-Frames */
- addr >>= 2; /* Convert to 2048-byte frames */
+ /*
+ * Convert to Minutes-Seconds-Frames.
+ * Sector size is already set to 2048 bytes.
+ */
addr += 2*75; /* Lead-in occupies 2 seconds */
dest[3] = addr % 75; /* Frames */
addr /= 75;
From: Russ Weight <[email protected]>
commit 789bba82f63c3e81dce426ba457fc7905b30ac6e upstream.
In the case of firmware-upload, an instance of struct fw_upload is
allocated in firmware_upload_register(). This data needs to be freed
in fw_dev_release(). Create a new fw_upload_free() function in
sysfs_upload.c to handle the firmware-upload specific memory frees
and incorporate the missing kfree call for the fw_upload structure.
Fixes: 97730bbb242c ("firmware_loader: Add firmware-upload support")
Cc: stable <[email protected]>
Signed-off-by: Russ Weight <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/firmware_loader/sysfs.c | 7 +++----
drivers/base/firmware_loader/sysfs.h | 5 +++++
drivers/base/firmware_loader/sysfs_upload.c | 9 +++++++++
3 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/base/firmware_loader/sysfs.c b/drivers/base/firmware_loader/sysfs.c
index 77bad32c481a..5b66b3d1fa16 100644
--- a/drivers/base/firmware_loader/sysfs.c
+++ b/drivers/base/firmware_loader/sysfs.c
@@ -93,10 +93,9 @@ static void fw_dev_release(struct device *dev)
{
struct fw_sysfs *fw_sysfs = to_fw_sysfs(dev);
- if (fw_sysfs->fw_upload_priv) {
- free_fw_priv(fw_sysfs->fw_priv);
- kfree(fw_sysfs->fw_upload_priv);
- }
+ if (fw_sysfs->fw_upload_priv)
+ fw_upload_free(fw_sysfs);
+
kfree(fw_sysfs);
}
diff --git a/drivers/base/firmware_loader/sysfs.h b/drivers/base/firmware_loader/sysfs.h
index 5d8ff1675c79..df1d5add698f 100644
--- a/drivers/base/firmware_loader/sysfs.h
+++ b/drivers/base/firmware_loader/sysfs.h
@@ -106,12 +106,17 @@ extern struct device_attribute dev_attr_cancel;
extern struct device_attribute dev_attr_remaining_size;
int fw_upload_start(struct fw_sysfs *fw_sysfs);
+void fw_upload_free(struct fw_sysfs *fw_sysfs);
umode_t fw_upload_is_visible(struct kobject *kobj, struct attribute *attr, int n);
#else
static inline int fw_upload_start(struct fw_sysfs *fw_sysfs)
{
return 0;
}
+
+static inline void fw_upload_free(struct fw_sysfs *fw_sysfs)
+{
+}
#endif
#endif /* __FIRMWARE_SYSFS_H */
diff --git a/drivers/base/firmware_loader/sysfs_upload.c b/drivers/base/firmware_loader/sysfs_upload.c
index 63e15bddd80c..a0af8f5f13d8 100644
--- a/drivers/base/firmware_loader/sysfs_upload.c
+++ b/drivers/base/firmware_loader/sysfs_upload.c
@@ -264,6 +264,15 @@ int fw_upload_start(struct fw_sysfs *fw_sysfs)
return 0;
}
+void fw_upload_free(struct fw_sysfs *fw_sysfs)
+{
+ struct fw_upload_priv *fw_upload_priv = fw_sysfs->fw_upload_priv;
+
+ free_fw_priv(fw_sysfs->fw_priv);
+ kfree(fw_upload_priv->fw_upload);
+ kfree(fw_upload_priv);
+}
+
/**
* firmware_upload_register() - register for the firmware upload sysfs API
* @module: kernel module of this device
--
2.37.3
From: Lin Ma <[email protected]>
[ Upstream commit afe7116f6d3b888778ed6d95e3cf724767b9aedf ]
There is a possible race condition (use-after-free) like below
(FREE) | (USE)
adf7242_remove | adf7242_channel
cancel_delayed_work_sync |
destroy_workqueue (1) | adf7242_cmd_rx
| mod_delayed_work (2)
|
The root cause for this race is that the upper layer (ieee802154) is
unaware of this detaching event and the function adf7242_channel can
be called without any checks.
To fix this, we can add a flag write at the beginning of adf7242_remove
and add flag check in adf7242_channel. Or we can just defer the
destructive operation like other commit 3e0588c291d6 ("hamradio: defer
ax25 kfree after unregister_netdev") which let the
ieee802154_unregister_hw() to handle the synchronization. This patch
takes the second option.
Fixes: 58e9683d1475 ("net: ieee802154: adf7242: Fix OCL calibration
runs")
Signed-off-by: Lin Ma <[email protected]>
Acked-by: Michael Hennerich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/adf7242.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
index 6afdf1622944e..5cf218c674a5a 100644
--- a/drivers/net/ieee802154/adf7242.c
+++ b/drivers/net/ieee802154/adf7242.c
@@ -1310,10 +1310,11 @@ static void adf7242_remove(struct spi_device *spi)
debugfs_remove_recursive(lp->debugfs_root);
+ ieee802154_unregister_hw(lp->hw);
+
cancel_delayed_work_sync(&lp->work);
destroy_workqueue(lp->wqueue);
- ieee802154_unregister_hw(lp->hw);
mutex_destroy(&lp->bmux);
ieee802154_free_hw(lp->hw);
}
--
2.35.1
From: Kuogee Hsieh <[email protected]>
[ Upstream commit 032d57960176ac01cc5adff5bcc5eb51317f8781 ]
Data Symbols scrambled is required for tps4 at link training 2.
Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to
work.
RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter
measurement with minimal equipment for embedded applications purpose
and is not required to be set during normal operation. Current
implementation always have RECOVERED_CLOCK_OUT_EN bit set which
cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent
tps4 from working.
This patch delete setting RECOVERED_CLOCK_OUT_EN to fix
SCRAMBLING_DISABLE be wrongly set at tps4.
Changes in v2:
-- fix Fixes tag
Changes in v3:
-- revise commit text
Changes in v4:
-- fix commit text newline
Changes in v5:
-- fix commit text line over 75 chars
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/497194/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 703249384e7c7..45aa06a31a9fd 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1214,7 +1214,7 @@ static int dp_ctrl_link_train_2(struct dp_ctrl_private *ctrl,
if (ret)
return ret;
- dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
+ dp_ctrl_train_pattern_set(ctrl, pattern);
for (tries = 0; tries <= maximum_retries; tries++) {
drm_dp_link_train_channel_eq_delay(ctrl->aux, ctrl->panel->dpcd);
--
2.35.1
From: Mathias Nyman <[email protected]>
[ Upstream commit 4a593a62a9e3a25ab4bc37f612e4edec144f7f43 ]
The remove path in xhci platform driver tries to remove and put both main
and shared hcds even if only a main hcd exists (one roothub)
This causes a null pointer dereference in reboot for those controllers.
Check that the shared_hcd exists before trying to remove it.
Fixes: e0fe986972f5 ("usb: host: xhci-plat: prepare operation w/o shared hcd")
Reported-by: Alexey Sheplyakov <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-plat.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 044855818cb11..a8641b6536eea 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -398,12 +398,17 @@ static int xhci_plat_remove(struct platform_device *dev)
pm_runtime_get_sync(&dev->dev);
xhci->xhc_state |= XHCI_STATE_REMOVING;
- usb_remove_hcd(shared_hcd);
- xhci->shared_hcd = NULL;
+ if (shared_hcd) {
+ usb_remove_hcd(shared_hcd);
+ xhci->shared_hcd = NULL;
+ }
+
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
- usb_put_hcd(shared_hcd);
+
+ if (shared_hcd)
+ usb_put_hcd(shared_hcd);
clk_disable_unprepare(clk);
clk_disable_unprepare(reg_clk);
--
2.35.1
From: Tetsuo Handa <[email protected]>
commit 4bb1a53be85fcb1e24c14860e326a00cdd362c28 upstream.
syzbot is reporting use of uninitialized spinlock at gsmld_write() [1], for
commit 32dd59f96924f45e ("tty: n_gsm: fix race condition in gsmld_write()")
allows accessing gsm->tx_lock before gsm_activate_mux() initializes it.
Since object initialization should be done right after allocation in order
to avoid accessing uninitialized memory, move initialization of
timer/work/waitqueue/spinlock from gsmld_open()/gsm_activate_mux() to
gsm_alloc_mux().
Link: https://syzkaller.appspot.com/bug?extid=cf155def4e717db68a12 [1]
Fixes: 32dd59f96924f45e ("tty: n_gsm: fix race condition in gsmld_write()")
Reported-by: syzbot <[email protected]>
Tested-by: syzbot <[email protected]>
Cc: stable <[email protected]>
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/n_gsm.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2501,13 +2501,6 @@ static int gsm_activate_mux(struct gsm_m
if (dlci == NULL)
return -ENOMEM;
- timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
- timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
- INIT_WORK(&gsm->tx_work, gsmld_write_task);
- init_waitqueue_head(&gsm->event);
- spin_lock_init(&gsm->control_lock);
- spin_lock_init(&gsm->tx_lock);
-
if (gsm->encoding == 0)
gsm->receive = gsm0_receive;
else
@@ -2612,6 +2605,12 @@ static struct gsm_mux *gsm_alloc_mux(voi
kref_init(&gsm->ref);
INIT_LIST_HEAD(&gsm->tx_ctrl_list);
INIT_LIST_HEAD(&gsm->tx_data_list);
+ timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
+ timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
+ INIT_WORK(&gsm->tx_work, gsmld_write_task);
+ init_waitqueue_head(&gsm->event);
+ spin_lock_init(&gsm->control_lock);
+ spin_lock_init(&gsm->tx_lock);
gsm->t1 = T1;
gsm->t2 = T2;
@@ -2947,10 +2946,6 @@ static int gsmld_open(struct tty_struct
gsmld_attach_gsm(tty, gsm);
- timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
- timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
- INIT_WORK(&gsm->tx_work, gsmld_write_task);
-
return 0;
}
From: Witold Lipieta <[email protected]>
commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream.
This is USB mass storage primary boot loader for code download on
NXP PN7462AU.
Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.
Acked-by: Alan Stern <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Witold Lipieta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2294,6 +2294,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+/* Reported by Witold Lipieta <[email protected]> */
+UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100,
+ "NXP Semiconductors",
+ "PN7462AU",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Supplied with some Castlewood ORB removable drives */
UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999,
"Double-H Technology",
From: Yan Xinyu <[email protected]>
commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.
Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.
usb-devices output:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22d9 ProdID=276c Rev=04.04
S: Manufacturer=OPPO
S: Product=SDM660-MTP _SN:09C6BCA7
S: SerialNumber=beb2c403
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
Signed-off-by: Yan Xinyu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -573,6 +573,10 @@ static void option_instat_callback(struc
#define WETELECOM_PRODUCT_6802 0x6802
#define WETELECOM_PRODUCT_WMD300 0x6803
+/* OPPO products */
+#define OPPO_VENDOR_ID 0x22d9
+#define OPPO_PRODUCT_R11 0x276c
+
/* Device flags */
@@ -2155,6 +2159,7 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
+ { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
From: SeongJae Park <[email protected]>
commit fe8f65b018effbf473f53af3538d0c1878b8b329 upstream.
Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront. Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.
Commit 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise. Therefore blkfront advertises
without reading the parameter. As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.
This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.
Fixes: 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <[email protected]> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: SeongJae Park <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/xen-blkfront.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1759,6 +1759,12 @@ abort_transaction:
return err;
}
+/* Enable the persistent grants feature. */
+static bool feature_persistent = true;
+module_param(feature_persistent, bool, 0644);
+MODULE_PARM_DESC(feature_persistent,
+ "Enables the persistent grants feature");
+
/* Common code used when first setting up, and when resuming. */
static int talk_to_blkback(struct xenbus_device *dev,
struct blkfront_info *info)
@@ -1850,6 +1856,7 @@ again:
message = "writing protocol";
goto abort_transaction;
}
+ info->feature_persistent_parm = feature_persistent;
err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
info->feature_persistent_parm);
if (err)
@@ -1919,12 +1926,6 @@ static int negotiate_mq(struct blkfront_
return 0;
}
-/* Enable the persistent grants feature. */
-static bool feature_persistent = true;
-module_param(feature_persistent, bool, 0644);
-MODULE_PARM_DESC(feature_persistent,
- "Enables the persistent grants feature");
-
/*
* Entry point to this code when a new device is created. Allocate the basic
* structures and the ring buffer for communication with the backend, and
@@ -2284,7 +2285,6 @@ static void blkfront_gather_backend_feat
if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0))
blkfront_setup_discard(info);
- info->feature_persistent_parm = feature_persistent;
if (info->feature_persistent_parm)
info->feature_persistent =
!!xenbus_read_unsigned(info->xbdev->otherend,
From: Johan Hovold <[email protected]>
commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream.
At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.
Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).
Reported-by: Jonathan Woithe <[email protected]>
Tested-by: Jonathan Woithe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: [email protected] # 4.10
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ch341.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -253,8 +253,12 @@ static int ch341_set_baudrate_lcr(struct
/*
* CH341A buffers data until a full endpoint-size packet (32 bytes)
* has been received unless bit 7 is set.
+ *
+ * At least one device with version 0x27 appears to have this bit
+ * inverted.
*/
- val |= BIT(7);
+ if (priv->version > 0x27)
+ val |= BIT(7);
r = ch341_control_out(dev, CH341_REQ_WRITE_REG,
CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER,
From: SeongJae Park <[email protected]>
commit 06ba5d2e943e97bb66e75c152e87f1d2c7027a67 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.
Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <[email protected]> # 5.10.x
Suggested-by: Juergen Gross <[email protected]>
Signed-off-by: SeongJae Park <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/xen-blkback/common.h | 3 +++
drivers/block/xen-blkback/xenbus.c | 6 ++++--
2 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -226,6 +226,9 @@ struct xen_vbd {
sector_t size;
unsigned int flush_support:1;
unsigned int discard_secure:1;
+ /* Connect-time cached feature_persistent parameter value */
+ unsigned int feature_gnt_persistent_parm:1;
+ /* Persistent grants feature negotiation result */
unsigned int feature_gnt_persistent:1;
unsigned int overflow_max_grants:1;
};
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -907,7 +907,7 @@ again:
xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support);
err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
- be->blkif->vbd.feature_gnt_persistent);
+ be->blkif->vbd.feature_gnt_persistent_parm);
if (err) {
xenbus_dev_fatal(dev, err, "writing %s/feature-persistent",
dev->nodename);
@@ -1085,7 +1085,9 @@ static int connect_ring(struct backend_i
return -ENOSYS;
}
- blkif->vbd.feature_gnt_persistent = feature_persistent &&
+ blkif->vbd.feature_gnt_persistent_parm = feature_persistent;
+ blkif->vbd.feature_gnt_persistent =
+ blkif->vbd.feature_gnt_persistent_parm &&
xenbus_read_unsigned(dev->otherend, "feature-persistent", 0);
blkif->vbd.overflow_max_grants = 0;
From: sunliming <[email protected]>
[ Upstream commit 2f25a1fb4ec516c5ad67afd754334b491b9f09a5 ]
Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3().
Fix the following smatch warnings:
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting
Fixes: f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: sunliming <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/494662/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index a39de3bdc7faf..56dfa2d24be1f 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -347,7 +347,7 @@ int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
} else {
timing->shared_timings.clk_pre =
linear_inter(tmax, tmin, pcnt2, 0, false);
- timing->shared_timings.clk_pre_inc_by_2 = 0;
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
}
timing->ta_go = 3;
--
2.35.1
From: Mathias Nyman <[email protected]>
[ Upstream commit 8531aa1659f7278d4f2ec7408cc000eaa8d85217 ]
This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185.
Turning off port power in shutdown did cause issues such as a laptop not
proprly powering off, and some specific usb devies failing to enumerate the
subsequent boot after a warm reset.
So revert this.
Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown")
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci.c | 15 ++-------------
drivers/usb/host/xhci.h | 2 --
3 files changed, 3 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0fdc014c94011..c54f2bc23d3f8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd)
* It will release and re-aquire the lock while calling ACPI
* method.
*/
-void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
u16 index, bool on, unsigned long *flags)
__must_hold(&xhci->lock)
{
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 65858f6074377..cb99bed5f755e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -791,8 +791,6 @@ static void xhci_stop(struct usb_hcd *hcd)
void xhci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- unsigned long flags;
- int i;
if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
@@ -808,21 +806,12 @@ void xhci_shutdown(struct usb_hcd *hcd)
del_timer_sync(&xhci->shared_hcd->rh_timer);
}
- spin_lock_irqsave(&xhci->lock, flags);
+ spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
-
- /* Power off USB2 ports*/
- for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
- xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags);
-
- /* Power off USB3 ports*/
- for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
- xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags);
-
/* Workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
- spin_unlock_irqrestore(&xhci->lock, flags);
+ spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 1960b47acfb28..da51ad90a7006 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2196,8 +2196,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
-void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index,
- bool on, unsigned long *flags);
void xhci_hc_died(struct xhci_hcd *xhci);
--
2.35.1
From: Hans de Goede <[email protected]>
[ Upstream commit b82a26d8633cc89367fac75beb3ec33061bea44a ]
Commit c8992cffbe74 ("Bluetooth: hci_event: Use of a function table to
handle Command Complete") was (presumably) meant to only refactor things
without any functional changes.
But it does have one undesirable side-effect, before *status would always
be set to skb->data[0] and it might be overridden by some of the opcode
specific handling. While now it always set by the opcode specific handlers.
This means that if the opcode is not known *status does not get set any
more at all!
This behavior change has broken bluetooth support for BCM4343A0 HCIs,
the hci_bcm.c code tries to configure UART attached HCIs at a higher
baudraute using vendor specific opcodes. The BCM4343A0 does not
support this and this used to simply fail:
[ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 25.646481] Bluetooth: hci0: Failed to set baudrate
After which things would continue with the initial baudraute. But now
that hci_cmd_complete_evt() no longer sets status for unknown opcodes
*status is left at 0. This causes the hci_bcm.c code to think the baudraute
has been changed on the HCI side and to also adjust the UART baudrate,
after which communication with the HCI is broken, leading to:
[ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout
[ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110)
And non working bluetooth. Fix this by restoring the previous
default "*status = skb->data[0]" handling for unknown opcodes.
Fixes: c8992cffbe74 ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 7cb956d3abb26..67c61f5240596 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3998,6 +3998,17 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, void *data,
}
}
+ if (i == ARRAY_SIZE(hci_cc_table)) {
+ /* Unknown opcode, assume byte 0 contains the status, so
+ * that e.g. __hci_cmd_sync() properly returns errors
+ * for vendor specific commands send by HCI drivers.
+ * If a vendor doesn't actually follow this convention we may
+ * need to introduce a vendor CC table in order to properly set
+ * the status.
+ */
+ *status = skb->data[0];
+ }
+
handle_cmd_cnt_and_timer(hdev, ev->ncmd);
hci_req_cmd_complete(hdev, *opcode, *status, req_complete,
--
2.35.1
From: Alan Stern <[email protected]>
commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream.
Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:
============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
...
stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114
This turned out not to be an error in usb-storage but rather a nested
device reset attempt. That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.
Performing a reset as part of disconnect processing is a questionable
practice at best. However, the bug report points out that the USB
core does not have any protection against nested resets. Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.
Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: [email protected]
Reported-and-tested-by: Rondreis <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 10 ++++++++++
include/linux/usb.h | 2 ++
2 files changed, 12 insertions(+)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -6048,6 +6048,11 @@ re_enumerate:
* the reset is over (using their post_reset method).
*
* Return: The same as for usb_reset_and_verify_device().
+ * However, if a reset is already in progress (for instance, if a
+ * driver doesn't have pre_ or post_reset() callbacks, and while
+ * being unbound or re-bound during the ongoing reset its disconnect()
+ * or probe() routine tries to perform a second, nested reset), the
+ * routine returns -EINPROGRESS.
*
* Note:
* The caller must own the device lock. For example, it's safe to use
@@ -6081,6 +6086,10 @@ int usb_reset_device(struct usb_device *
return -EISDIR;
}
+ if (udev->reset_in_progress)
+ return -EINPROGRESS;
+ udev->reset_in_progress = 1;
+
port_dev = hub->ports[udev->portnum - 1];
/*
@@ -6145,6 +6154,7 @@ int usb_reset_device(struct usb_device *
usb_autosuspend_device(udev);
memalloc_noio_restore(noio_flag);
+ udev->reset_in_progress = 0;
return ret;
}
EXPORT_SYMBOL_GPL(usb_reset_device);
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -575,6 +575,7 @@ struct usb3_lpm_parameters {
* @devaddr: device address, XHCI: assigned by HW, others: same as devnum
* @can_submit: URBs may be submitted
* @persist_enabled: USB_PERSIST enabled for this device
+ * @reset_in_progress: the device is being reset
* @have_langid: whether string_langid is valid
* @authorized: policy has said we can use it;
* (user space) policy determines if we authorize this device to be
@@ -661,6 +662,7 @@ struct usb_device {
unsigned can_submit:1;
unsigned persist_enabled:1;
+ unsigned reset_in_progress:1;
unsigned have_langid:1;
unsigned authorized:1;
unsigned authenticated:1;
From: Magnus Karlsson <[email protected]>
[ Upstream commit 58ca14ed98c87cfe0d1408cc65a9745d9e9b7a56 ]
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem.
Fixes: 94033cd8e73b8 ("xsk: Optimize for aligned case")
Reported-by: Alasdair McWilliam <[email protected]>
Reported-by: Intrusion Shield Team <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Alasdair McWilliam <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/xdp-newbies/[email protected]/
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/xdp/xsk_buff_pool.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c
index f70112176b7c1..a71a8c6edf553 100644
--- a/net/xdp/xsk_buff_pool.c
+++ b/net/xdp/xsk_buff_pool.c
@@ -379,6 +379,16 @@ static void xp_check_dma_contiguity(struct xsk_dma_map *dma_map)
static int xp_init_dma_info(struct xsk_buff_pool *pool, struct xsk_dma_map *dma_map)
{
+ if (!pool->unaligned) {
+ u32 i;
+
+ for (i = 0; i < pool->heads_cnt; i++) {
+ struct xdp_buff_xsk *xskb = &pool->heads[i];
+
+ xp_init_xskb_dma(xskb, pool, dma_map->dma_pages, xskb->orig_addr);
+ }
+ }
+
pool->dma_pages = kvcalloc(dma_map->dma_pages_cnt, sizeof(*pool->dma_pages), GFP_KERNEL);
if (!pool->dma_pages)
return -ENOMEM;
@@ -428,12 +438,6 @@ int xp_dma_map(struct xsk_buff_pool *pool, struct device *dev,
if (pool->unaligned)
xp_check_dma_contiguity(dma_map);
- else
- for (i = 0; i < pool->heads_cnt; i++) {
- struct xdp_buff_xsk *xskb = &pool->heads[i];
-
- xp_init_xskb_dma(xskb, pool, dma_map->dma_pages, xskb->orig_addr);
- }
err = xp_init_dma_info(pool, dma_map);
if (err) {
--
2.35.1
From: Waiman Long <[email protected]>
[ Upstream commit 0495e337b7039191dfce6e03f5f830454b1fae6b ]
A circular locking problem is reported by lockdep due to the following
circular locking dependency.
+--> cpu_hotplug_lock --> slab_mutex --> kn->active --+
| |
+-----------------------------------------------------+
The forward cpu_hotplug_lock ==> slab_mutex ==> kn->active dependency
happens in
kmem_cache_destroy(): cpus_read_lock(); mutex_lock(&slab_mutex);
==> sysfs_slab_unlink()
==> kobject_del()
==> kernfs_remove()
==> __kernfs_remove()
==> kernfs_drain(): rwsem_acquire(&kn->dep_map, ...);
The backward kn->active ==> cpu_hotplug_lock dependency happens in
kernfs_fop_write_iter(): kernfs_get_active();
==> slab_attr_store()
==> cpu_partial_store()
==> flush_all(): cpus_read_lock()
One way to break this circular locking chain is to avoid holding
cpu_hotplug_lock and slab_mutex while deleting the kobject in
sysfs_slab_unlink() which should be equivalent to doing a write_lock
and write_unlock pair of the kn->active virtual lock.
Since the kobject structures are not protected by slab_mutex or the
cpu_hotplug_lock, we can certainly release those locks before doing
the delete operation.
Move sysfs_slab_unlink() and sysfs_slab_release() to the newly
created kmem_cache_release() and call it outside the slab_mutex &
cpu_hotplug_lock critical sections. There will be a slight delay
in the deletion of sysfs files if kmem_cache_release() is called
indirectly from a work function.
Fixes: 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Signed-off-by: Waiman Long <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Reviewed-by: Roman Gushchin <[email protected]>
Acked-by: David Rientjes <[email protected]>
Link: https://lore.kernel.org/all/YwOImVd+nRUsSAga@hyeyoo/
Signed-off-by: Vlastimil Babka <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/slab_common.c | 45 +++++++++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 16 deletions(-)
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 77c3adf40e504..dbd4b6f9b0e79 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -420,6 +420,28 @@ kmem_cache_create(const char *name, unsigned int size, unsigned int align,
}
EXPORT_SYMBOL(kmem_cache_create);
+#ifdef SLAB_SUPPORTS_SYSFS
+/*
+ * For a given kmem_cache, kmem_cache_destroy() should only be called
+ * once or there will be a use-after-free problem. The actual deletion
+ * and release of the kobject does not need slab_mutex or cpu_hotplug_lock
+ * protection. So they are now done without holding those locks.
+ *
+ * Note that there will be a slight delay in the deletion of sysfs files
+ * if kmem_cache_release() is called indrectly from a work function.
+ */
+static void kmem_cache_release(struct kmem_cache *s)
+{
+ sysfs_slab_unlink(s);
+ sysfs_slab_release(s);
+}
+#else
+static void kmem_cache_release(struct kmem_cache *s)
+{
+ slab_kmem_cache_release(s);
+}
+#endif
+
static void slab_caches_to_rcu_destroy_workfn(struct work_struct *work)
{
LIST_HEAD(to_destroy);
@@ -446,11 +468,7 @@ static void slab_caches_to_rcu_destroy_workfn(struct work_struct *work)
list_for_each_entry_safe(s, s2, &to_destroy, list) {
debugfs_slab_release(s);
kfence_shutdown_cache(s);
-#ifdef SLAB_SUPPORTS_SYSFS
- sysfs_slab_release(s);
-#else
- slab_kmem_cache_release(s);
-#endif
+ kmem_cache_release(s);
}
}
@@ -465,20 +483,11 @@ static int shutdown_cache(struct kmem_cache *s)
list_del(&s->list);
if (s->flags & SLAB_TYPESAFE_BY_RCU) {
-#ifdef SLAB_SUPPORTS_SYSFS
- sysfs_slab_unlink(s);
-#endif
list_add_tail(&s->list, &slab_caches_to_rcu_destroy);
schedule_work(&slab_caches_to_rcu_destroy_work);
} else {
kfence_shutdown_cache(s);
debugfs_slab_release(s);
-#ifdef SLAB_SUPPORTS_SYSFS
- sysfs_slab_unlink(s);
- sysfs_slab_release(s);
-#else
- slab_kmem_cache_release(s);
-#endif
}
return 0;
@@ -493,14 +502,16 @@ void slab_kmem_cache_release(struct kmem_cache *s)
void kmem_cache_destroy(struct kmem_cache *s)
{
+ int refcnt;
+
if (unlikely(!s) || !kasan_check_byte(s))
return;
cpus_read_lock();
mutex_lock(&slab_mutex);
- s->refcount--;
- if (s->refcount)
+ refcnt = --s->refcount;
+ if (refcnt)
goto out_unlock;
WARN(shutdown_cache(s),
@@ -509,6 +520,8 @@ void kmem_cache_destroy(struct kmem_cache *s)
out_unlock:
mutex_unlock(&slab_mutex);
cpus_read_unlock();
+ if (!refcnt && !(s->flags & SLAB_TYPESAFE_BY_RCU))
+ kmem_cache_release(s);
}
EXPORT_SYMBOL(kmem_cache_destroy);
--
2.35.1
From: Bjorn Andersson <[email protected]>
[ Upstream commit 02b9f2636209beb843ca501d47f7fddc8792b2d7 ]
In the event that devm_devfreq_add_device() fails the device's qos freq
list is left referencing df->idle_freq and df->boost_freq. Attempting to
initialize devfreq again after a probe deferral will then cause invalid
memory accesses in dev_pm_qos_add_request().
Fix this by dropping the requests in the error path.
Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Rob Clark <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/493001/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_gpu_devfreq.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_gpu_devfreq.c b/drivers/gpu/drm/msm/msm_gpu_devfreq.c
index ea94bc18e72eb..89cc93eb67557 100644
--- a/drivers/gpu/drm/msm/msm_gpu_devfreq.c
+++ b/drivers/gpu/drm/msm/msm_gpu_devfreq.c
@@ -213,6 +213,8 @@ void msm_devfreq_init(struct msm_gpu *gpu)
if (IS_ERR(df->devfreq)) {
DRM_DEV_ERROR(&gpu->pdev->dev, "Couldn't initialize GPU devfreq\n");
+ dev_pm_qos_remove_request(&df->idle_freq);
+ dev_pm_qos_remove_request(&df->boost_freq);
df->devfreq = NULL;
return;
}
--
2.35.1
From: Jouni Högander <[email protected]>
commit 51fbbe8a3f8b9dd128fa98f6ea36058dfa3f36de upstream.
Pps power hook seems to be problematic for backlight controlled via
aux channel. Disable it for such cases.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3657
Cc: [email protected]
Signed-off-by: Jouni Högander <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 869e3bb7acb59d88c1226892136661810e8223a4)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_backlight.c | 11 ++++++++---
drivers/gpu/drm/i915/display/intel_dp.c | 2 --
2 files changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_backlight.c
@@ -15,6 +15,7 @@
#include "intel_dsi_dcs_backlight.h"
#include "intel_panel.h"
#include "intel_pci_config.h"
+#include "intel_pps.h"
/**
* scale - scale values from one range to another
@@ -1769,9 +1770,13 @@ void intel_backlight_init_funcs(struct i
panel->backlight.pwm_funcs = &i9xx_pwm_funcs;
}
- if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP &&
- intel_dp_aux_init_backlight_funcs(connector) == 0)
- return;
+ if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if (intel_dp_aux_init_backlight_funcs(connector) == 0)
+ return;
+
+ if (!(dev_priv->quirks & QUIRK_NO_PPS_BACKLIGHT_POWER_HOOK))
+ connector->panel.backlight.power = intel_pps_backlight_power;
+ }
/* We're using a standard PWM backlight interface */
panel->backlight.funcs = &pwm_bl_funcs;
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5248,8 +5248,6 @@ static bool intel_edp_init_connector(str
intel_panel_init(intel_connector);
- if (!(dev_priv->quirks & QUIRK_NO_PPS_BACKLIGHT_POWER_HOOK))
- intel_connector->panel.backlight.power = intel_pps_backlight_power;
intel_backlight_setup(intel_connector, pipe);
intel_edp_add_properties(intel_dp);
From: Helge Deller <[email protected]>
commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.
When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().
Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.
Reported-by: [email protected]
Cc: stable <[email protected]>
Tested-by: Khalid Masum <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -4662,9 +4662,11 @@ static int con_font_set(struct vc_data *
console_lock();
if (vc->vc_mode != KD_TEXT)
rc = -EINVAL;
- else if (vc->vc_sw->con_font_set)
+ else if (vc->vc_sw->con_font_set) {
+ if (vc_is_sel(vc))
+ clear_selection();
rc = vc->vc_sw->con_font_set(vc, &font, op->flags);
- else
+ } else
rc = -ENOSYS;
console_unlock();
kfree(font.data);
@@ -4691,9 +4693,11 @@ static int con_font_default(struct vc_da
console_unlock();
return -EINVAL;
}
- if (vc->vc_sw->con_font_default)
+ if (vc->vc_sw->con_font_default) {
+ if (vc_is_sel(vc))
+ clear_selection();
rc = vc->vc_sw->con_font_default(vc, &font, s);
- else
+ } else
rc = -ENOSYS;
console_unlock();
if (!rc) {
From: Haibo Chen <[email protected]>
[ Upstream commit 518e26f11af2fe4f5bebf9a0351595d508c7077f ]
The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.
Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true
To avoid this issue, use the driver's own lock to do the protect
in system PM.
Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-pca953x.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index ecd7d169470b0..2925f4d8cef36 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -1175,7 +1175,9 @@ static int pca953x_suspend(struct device *dev)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
+ mutex_lock(&chip->i2c_lock);
regcache_cache_only(chip->regmap, true);
+ mutex_unlock(&chip->i2c_lock);
if (atomic_read(&chip->wakeup_path))
device_set_wakeup_path(dev);
@@ -1198,13 +1200,17 @@ static int pca953x_resume(struct device *dev)
}
}
+ mutex_lock(&chip->i2c_lock);
regcache_cache_only(chip->regmap, false);
regcache_mark_dirty(chip->regmap);
ret = pca953x_regcache_sync(dev);
- if (ret)
+ if (ret) {
+ mutex_unlock(&chip->i2c_lock);
return ret;
+ }
ret = regcache_sync(chip->regmap);
+ mutex_unlock(&chip->i2c_lock);
if (ret) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
return ret;
--
2.35.1
From: Alex Williamson <[email protected]>
[ Upstream commit b75ef35bb57791a5d675699ed4a40c870d1da12f ]
Prior to the commit below the GAMT_CHKN_BIT_REG address was setup for
devices matching (D_KBL | D_CFL), where intel_gvt_get_device_type()
returns D_CFL for either Coffee Lake or Comet Lake. Include the missed
platform.`
Link: https://lore.kernel.org/all/[email protected]
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/166016852965.780835.10366587502693016900.stgit@omen
Reviewed-by: Zhenyu Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/intel_gvt_mmio_table.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_gvt_mmio_table.c b/drivers/gpu/drm/i915/intel_gvt_mmio_table.c
index 72dac1718f3e7..6163aeaee9b98 100644
--- a/drivers/gpu/drm/i915/intel_gvt_mmio_table.c
+++ b/drivers/gpu/drm/i915/intel_gvt_mmio_table.c
@@ -1074,7 +1074,8 @@ static int iterate_skl_plus_mmio(struct intel_gvt_mmio_table_iter *iter)
MMIO_D(GEN8_HDC_CHICKEN1);
MMIO_D(GEN9_WM_CHICKEN3);
- if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv))
+ if (IS_KABYLAKE(dev_priv) ||
+ IS_COFFEELAKE(dev_priv) || IS_COMETLAKE(dev_priv))
MMIO_D(GAMT_CHKN_BIT_REG);
if (!IS_BROXTON(dev_priv))
MMIO_D(GEN9_CTX_PREEMPT_REG);
--
2.35.1
From: Dan Carpenter <[email protected]>
[ Upstream commit e9ea0b30ada008f4e65933f449db6894832cb242 ]
The change from kcalloc() to kvmalloc() means that arg->nr_pages
might now be large enough that the "args->nr_pages << PAGE_SHIFT" can
result in an integer overflow.
Fixes: b3f7931f5c61 ("xen/gntdev: switch from kcalloc() to kvcalloc()")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/grant-table.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 738029de3c672..e1ec725c2819d 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -1047,6 +1047,9 @@ int gnttab_dma_alloc_pages(struct gnttab_dma_alloc_args *args)
size_t size;
int i, ret;
+ if (args->nr_pages < 0 || args->nr_pages > (INT_MAX >> PAGE_SHIFT))
+ return -ENOMEM;
+
size = args->nr_pages << PAGE_SHIFT;
if (args->coherent)
args->vaddr = dma_alloc_coherent(args->dev, size,
--
2.35.1
From: Arnd Bergmann <[email protected]>
commit a3f2fd22743fc56dd5e3896a3fbddd276df1577f upstream.
Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.
It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.
Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.
Fixes: ab37a7a890c1 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in")
Fixes: c0442479652b ("usb: musb: Fix randconfig build issues for Kconfig options")
Cc: stable <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -86,7 +86,7 @@ config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
depends on ARCH_OMAP2PLUS || COMPILE_TEST
- depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
+ depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m
config USB_MUSB_OMAP2PLUS
tristate "OMAP2430 and onwards"
From: Pablo Sun <[email protected]>
commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream.
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: [email protected]
Co-developed-by: Pablo Sun <[email protected]>
Co-developed-by: Macpaul Lin <[email protected]>
Reviewed-by: Guillaume Ranquet <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Pablo Sun <[email protected]>
Signed-off-by: Macpaul Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/altmodes/displayport.c | 4 ++--
include/linux/usb/typec_dp.h | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -99,8 +99,8 @@ static int dp_altmode_configure(struct d
case DP_STATUS_CON_UFP_D:
case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
conf |= DP_CONF_UFP_U_AS_UFP_D;
- pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) &
- DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo);
+ pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
+ DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
break;
default:
break;
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -73,6 +73,11 @@ enum {
#define DP_CAP_USB BIT(7)
#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8)
#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16)
+/* Get pin assignment taking plug & receptacle into consideration */
+#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_))
+#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_))
/* DisplayPort Status Update VDO bits */
#define DP_STATUS_CONNECTION(_status_) ((_status_) & 3)
From: Johan Hovold <[email protected]>
commit 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea upstream.
The dwc3 driver manages its PHYs itself so the USB core PHY management
needs to be disabled.
Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb:
host: xhci-plat: add platform data support") and f768e718911e ("usb:
host: xhci-plat: add priv quirk for skip PHY initialization") to
propagate the setting for now.
Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd")
Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core")
Tested-by: Matthias Kaehlcke <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/host.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,8 +11,13 @@
#include <linux/of.h>
#include <linux/platform_device.h>
+#include "../host/xhci-plat.h"
#include "core.h"
+static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
+ .quirks = XHCI_SKIP_PHY_INIT,
+};
+
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
{
@@ -92,6 +97,11 @@ int dwc3_host_init(struct dwc3 *dwc)
goto err;
}
+ ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
+ sizeof(dwc3_xhci_plat_priv));
+ if (ret)
+ goto err;
+
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
if (dwc->usb3_lpm_capable)
From: Steven Price <[email protected]>
[ Upstream commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 ]
The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.
For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.
For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.
This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.
Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/mm/pageattr.c | 4 ++--
mm/pagewalk.c | 21 ++++++++++++---------
mm/ptdump.c | 4 ++--
3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c
index 5e49e4b4a4ccc..86c56616e5dea 100644
--- a/arch/riscv/mm/pageattr.c
+++ b/arch/riscv/mm/pageattr.c
@@ -118,10 +118,10 @@ static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask,
if (!numpages)
return 0;
- mmap_read_lock(&init_mm);
+ mmap_write_lock(&init_mm);
ret = walk_page_range_novma(&init_mm, start, end, &pageattr_ops, NULL,
&masks);
- mmap_read_unlock(&init_mm);
+ mmap_write_unlock(&init_mm);
flush_tlb_kernel_range(start, end);
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 9b3db11a4d1db..fa7a3d21a7518 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -110,7 +110,7 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end,
do {
again:
next = pmd_addr_end(addr, end);
- if (pmd_none(*pmd) || (!walk->vma && !walk->no_vma)) {
+ if (pmd_none(*pmd)) {
if (ops->pte_hole)
err = ops->pte_hole(addr, next, depth, walk);
if (err)
@@ -171,7 +171,7 @@ static int walk_pud_range(p4d_t *p4d, unsigned long addr, unsigned long end,
do {
again:
next = pud_addr_end(addr, end);
- if (pud_none(*pud) || (!walk->vma && !walk->no_vma)) {
+ if (pud_none(*pud)) {
if (ops->pte_hole)
err = ops->pte_hole(addr, next, depth, walk);
if (err)
@@ -366,19 +366,19 @@ static int __walk_page_range(unsigned long start, unsigned long end,
struct vm_area_struct *vma = walk->vma;
const struct mm_walk_ops *ops = walk->ops;
- if (vma && ops->pre_vma) {
+ if (ops->pre_vma) {
err = ops->pre_vma(start, end, walk);
if (err)
return err;
}
- if (vma && is_vm_hugetlb_page(vma)) {
+ if (is_vm_hugetlb_page(vma)) {
if (ops->hugetlb_entry)
err = walk_hugetlb_range(start, end, walk);
} else
err = walk_pgd_range(start, end, walk);
- if (vma && ops->post_vma)
+ if (ops->post_vma)
ops->post_vma(walk);
return err;
@@ -450,9 +450,13 @@ int walk_page_range(struct mm_struct *mm, unsigned long start,
if (!vma) { /* after the last vma */
walk.vma = NULL;
next = end;
+ if (ops->pte_hole)
+ err = ops->pte_hole(start, next, -1, &walk);
} else if (start < vma->vm_start) { /* outside vma */
walk.vma = NULL;
next = min(end, vma->vm_start);
+ if (ops->pte_hole)
+ err = ops->pte_hole(start, next, -1, &walk);
} else { /* inside vma */
walk.vma = vma;
next = min(end, vma->vm_end);
@@ -470,9 +474,8 @@ int walk_page_range(struct mm_struct *mm, unsigned long start,
}
if (err < 0)
break;
- }
- if (walk.vma || walk.ops->pte_hole)
err = __walk_page_range(start, next, &walk);
+ }
if (err)
break;
} while (start = next, start < end);
@@ -501,9 +504,9 @@ int walk_page_range_novma(struct mm_struct *mm, unsigned long start,
if (start >= end || !walk.mm)
return -EINVAL;
- mmap_assert_locked(walk.mm);
+ mmap_assert_write_locked(walk.mm);
- return __walk_page_range(start, end, &walk);
+ return walk_pgd_range(start, end, &walk);
}
int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops,
diff --git a/mm/ptdump.c b/mm/ptdump.c
index eea3d28d173c2..8adab455a68b3 100644
--- a/mm/ptdump.c
+++ b/mm/ptdump.c
@@ -152,13 +152,13 @@ void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm, pgd_t *pgd)
{
const struct ptdump_range *range = st->range;
- mmap_read_lock(mm);
+ mmap_write_lock(mm);
while (range->start != range->end) {
walk_page_range_novma(mm, range->start, range->end,
&ptdump_ops, pgd, st);
range++;
}
- mmap_read_unlock(mm);
+ mmap_write_unlock(mm);
/* Flush out the last page */
st->note_page(st, 0, -1, 0);
--
2.35.1
From: Heikki Krogerus <[email protected]>
commit bad0d1d726ace2db9e0f39c62b173bc7cc43dd6a upstream.
This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-pci.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -44,6 +44,7 @@
#define PCI_DEVICE_ID_INTEL_ADLP 0x51ee
#define PCI_DEVICE_ID_INTEL_ADLM 0x54ee
#define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1
+#define PCI_DEVICE_ID_INTEL_RPL 0x460e
#define PCI_DEVICE_ID_INTEL_RPLS 0x7a61
#define PCI_DEVICE_ID_INTEL_MTLP 0x7ec1
#define PCI_DEVICE_ID_INTEL_MTL 0x7e7e
@@ -456,6 +457,9 @@ static const struct pci_device_id dwc3_p
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS),
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPL),
+ (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS),
(kernel_ulong_t) &dwc3_pci_intel_swnode, },
From: Chunfeng Yun <[email protected]>
commit 8b13ea05117ffad4727b0971ed09122d5c91c4dc upstream.
Currently uses the worst case byte budgets on FS/LS bus bandwidth,
for example, for an isochronos IN endpoint with 192 bytes budget, it
will consume the whole 5 uframes(188 * 5) while the actual FS bus
budget should be just 192 bytes. It cause that many usb audio headsets
with 3 interfaces (audio input, audio output, and HID) cannot be
configured.
To improve it, changes to use "approximate" best case budget for FS/LS
bandwidth management. For the same endpoint from the above example,
the approximate best case budget is now reduced to (188 * 2) bytes.
Signed-off-by: Chunfeng Yun <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mtk-sch.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -425,7 +425,6 @@ static int check_fs_bus_bw(struct mu3h_s
static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
{
- u32 extra_cs_count;
u32 start_ss, last_ss;
u32 start_cs, last_cs;
@@ -461,18 +460,12 @@ static int check_sch_tt(struct mu3h_sch_
if (last_cs > 7)
return -ESCH_CS_OVERFLOW;
- if (sch_ep->ep_type == ISOC_IN_EP)
- extra_cs_count = (last_cs == 7) ? 1 : 2;
- else /* ep_type : INTR IN / INTR OUT */
- extra_cs_count = 1;
-
- cs_count += extra_cs_count;
if (cs_count > 7)
cs_count = 7; /* HW limit */
sch_ep->cs_count = cs_count;
- /* one for ss, the other for idle */
- sch_ep->num_budget_microframes = cs_count + 2;
+ /* ss, idle are ignored */
+ sch_ep->num_budget_microframes = cs_count;
/*
* if interval=1, maxp >752, num_budge_micoframe is larger
From: Michael Ellerman <[email protected]>
commit 91926d8b7e71aaf5f84f0cf208fc5a8b7a761050 upstream.
The semi-recent changes to MSR handling when entering RTAS (firmware)
cause crashes on IBM Cell machines. An example trace:
kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0x2fff01a8
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207
NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000
REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a)
MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000
...
NIP 0x2fff01a8
LR 0x32608
Call Trace:
0xc00000000143c5f8 (unreliable)
.rtas_call+0x224/0x320
.rtas_get_boot_time+0x70/0x150
.read_persistent_clock64+0x114/0x140
.read_persistent_wall_and_boot_offset+0x24/0x80
.timekeeping_init+0x40/0x29c
.start_kernel+0x674/0x8f0
start_here_common+0x1c/0x50
Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell
machines Linux runs with MSR[HV] set but also uses RTAS, provided by
SLOF.
Fix it by copying the MSR[HV] bit from the MSR value we've just read
using mfmsr into the value used for RTAS.
It seems like we could also fix it using an #ifdef CELL to set MSR[HV],
but that doesn't work because it's possible to build a single kernel
image that runs on both Cell native and pseries.
Fixes: b6b1c3ce06ca ("powerpc/rtas: Keep MSR[RI] set when calling RTAS")
Cc: [email protected] # v5.19+
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Jordan Niethe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/rtas_entry.S | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/powerpc/kernel/rtas_entry.S
+++ b/arch/powerpc/kernel/rtas_entry.S
@@ -109,8 +109,12 @@ __enter_rtas:
* its critical regions (as specified in PAPR+ section 7.2.1). MSR[S]
* is not impacted by RFI_TO_KERNEL (only urfid can unset it). So if
* MSR[S] is set, it will remain when entering RTAS.
+ * If we're in HV mode, RTAS must also run in HV mode, so extract MSR_HV
+ * from the saved MSR value and insert into the value RTAS will use.
*/
+ extrdi r0, r6, 1, 63 - MSR_HV_LG
LOAD_REG_IMMEDIATE(r6, MSR_ME | MSR_RI)
+ insrdi r6, r0, 1, 63 - MSR_HV_LG
li r0,0
mtmsrd r0,1 /* disable RI before using SRR0/1 */
From: Arun R Murthy <[email protected]>
[ Upstream commit 868e8e5156a1f8d92ca83fdbac6fd52798650792 ]
Commit 20f85ef89d94 ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().
Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.
v2: reworked on top of the patch commit 20f85ef89d94
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)
Fixes: 20f85ef89d94 ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4234ea30051200fc6016de10e4d58369e60b38f1)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/i915/display/intel_backlight.c | 26 +++++++++----------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_backlight.c b/drivers/gpu/drm/i915/display/intel_backlight.c
index c8e1fc53a881f..79f8a586623dc 100644
--- a/drivers/gpu/drm/i915/display/intel_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_backlight.c
@@ -970,26 +970,24 @@ int intel_backlight_device_register(struct intel_connector *connector)
if (!name)
return -ENOMEM;
- bd = backlight_device_register(name, connector->base.kdev, connector,
- &intel_backlight_device_ops, &props);
-
- /*
- * Using the same name independent of the drm device or connector
- * prevents registration of multiple backlight devices in the
- * driver. However, we need to use the default name for backward
- * compatibility. Use unique names for subsequent backlight devices as a
- * fallback when the default name already exists.
- */
- if (IS_ERR(bd) && PTR_ERR(bd) == -EEXIST) {
+ bd = backlight_device_get_by_name(name);
+ if (bd) {
+ put_device(&bd->dev);
+ /*
+ * Using the same name independent of the drm device or connector
+ * prevents registration of multiple backlight devices in the
+ * driver. However, we need to use the default name for backward
+ * compatibility. Use unique names for subsequent backlight devices as a
+ * fallback when the default name already exists.
+ */
kfree(name);
name = kasprintf(GFP_KERNEL, "card%d-%s-backlight",
i915->drm.primary->index, connector->base.name);
if (!name)
return -ENOMEM;
-
- bd = backlight_device_register(name, connector->base.kdev, connector,
- &intel_backlight_device_ops, &props);
}
+ bd = backlight_device_register(name, connector->base.kdev, connector,
+ &intel_backlight_device_ops, &props);
if (IS_ERR(bd)) {
drm_err(&i915->drm,
--
2.35.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ]
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/pmc_atom.c | 2 +-
include/linux/platform_data/x86/pmc_atom.h | 6 ++++--
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index 154317e9910d2..5c757c7f64dee 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -232,7 +232,7 @@ static void pmc_power_off(void)
pm1_cnt_port = acpi_base_addr + PM1_CNT;
pm1_cnt_value = inl(pm1_cnt_port);
- pm1_cnt_value &= SLEEP_TYPE_MASK;
+ pm1_cnt_value &= ~SLEEP_TYPE_MASK;
pm1_cnt_value |= SLEEP_TYPE_S5;
pm1_cnt_value |= SLEEP_ENABLE;
diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h
index 6807839c718bd..ea01dd80153b3 100644
--- a/include/linux/platform_data/x86/pmc_atom.h
+++ b/include/linux/platform_data/x86/pmc_atom.h
@@ -7,6 +7,8 @@
#ifndef PMC_ATOM_H
#define PMC_ATOM_H
+#include <linux/bits.h>
+
/* ValleyView Power Control Unit PCI Device ID */
#define PCI_DEVICE_ID_VLV_PMC 0x0F1C
/* CherryTrail Power Control Unit PCI Device ID */
@@ -139,9 +141,9 @@
#define ACPI_MMIO_REG_LEN 0x100
#define PM1_CNT 0x4
-#define SLEEP_TYPE_MASK 0xFFFFECFF
+#define SLEEP_TYPE_MASK GENMASK(12, 10)
#define SLEEP_TYPE_S5 0x1C00
-#define SLEEP_ENABLE 0x2000
+#define SLEEP_ENABLE BIT(13)
extern int pmc_atom_read(int offset, u32 *value);
--
2.35.1
From: Łukasz Bartosik <[email protected]>
[ Upstream commit 458ec0c8f35963626ccd51c3d50b752de5f1b9d4 ]
Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel.
The root cause is null pointer defeference of bi_next
in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c.
BUG: kernel NULL pointer dereference, address: 000000000000002e
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021
RIP: 0010:tgl_get_bw_info+0x2de/0x510
...
[ 2.554467] Call Trace:
[ 2.554467] <TASK>
[ 2.554467] intel_bw_init_hw+0x14a/0x434
[ 2.554467] ? _printk+0x59/0x73
[ 2.554467] ? _dev_err+0x77/0x91
[ 2.554467] i915_driver_hw_probe+0x329/0x33e
[ 2.554467] i915_driver_probe+0x4c8/0x638
[ 2.554467] i915_pci_probe+0xf8/0x14e
[ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c
[ 2.554467] pci_device_probe+0xaa/0x142
[ 2.554467] really_probe+0x13f/0x2f4
[ 2.554467] __driver_probe_device+0x9e/0xd3
[ 2.554467] driver_probe_device+0x24/0x7c
[ 2.554467] __driver_attach+0xba/0xcf
[ 2.554467] ? driver_attach+0x1f/0x1f
[ 2.554467] bus_for_each_dev+0x8c/0xc0
[ 2.554467] bus_add_driver+0x11b/0x1f7
[ 2.554467] driver_register+0x60/0xea
[ 2.554467] ? mipi_dsi_bus_init+0x16/0x16
[ 2.554467] i915_init+0x2c/0xb9
[ 2.554467] ? mipi_dsi_bus_init+0x16/0x16
[ 2.554467] do_one_initcall+0x12e/0x2b3
[ 2.554467] do_initcall_level+0xd6/0xf3
[ 2.554467] do_initcalls+0x4e/0x79
[ 2.554467] kernel_init_freeable+0xed/0x14d
[ 2.554467] ? rest_init+0xc1/0xc1
[ 2.554467] kernel_init+0x1a/0x120
[ 2.554467] ret_from_fork+0x1f/0x30
[ 2.554467] </TASK>
...
Kernel panic - not syncing: Fatal exception
Fixes: c64a9a7c05be ("drm/i915: Update memory bandwidth formulae")
Signed-off-by: Łukasz Bartosik <[email protected]>
Reviewed-by: Radhakrishna Sripada <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/display/intel_bw.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 37bd7b17f3d0b..f2fad199e2e0b 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -404,15 +404,17 @@ static int tgl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
int clpchgroup;
int j;
- if (i < num_groups - 1)
- bi_next = &dev_priv->max_bw[i + 1];
-
clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i;
- if (i < num_groups - 1 && clpchgroup < clperchgroup)
- bi_next->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
- else
- bi_next->num_planes = 0;
+ if (i < num_groups - 1) {
+ bi_next = &dev_priv->max_bw[i + 1];
+
+ if (clpchgroup < clperchgroup)
+ bi_next->num_planes = (ipqdepth - clpchgroup) /
+ clpchgroup + 1;
+ else
+ bi_next->num_planes = 0;
+ }
bi->num_qgv_points = qi.num_points;
bi->num_psf_gv_points = qi.num_psf_points;
--
2.35.1
From: Christophe JAILLET <[email protected]>
commit 160905549e663019e26395ed9d66c24ee2cf5187 upstream.
The commit in Fixes also introduced a new error handling path which should
goto the existing error handling path.
Otherwise some resources leak.
Fixes: 0d31d91e6145 ("iio: light: cm3605: Make use of the helper function dev_err_probe()")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/0e186de2c125b3e17476ebf9c54eae4a5d66f994.1659854238.git.christophe.jaillet@wanadoo.fr
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/light/cm3605.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/cm3605.c b/drivers/iio/light/cm3605.c
index c721b69d5095..0b30db77f78b 100644
--- a/drivers/iio/light/cm3605.c
+++ b/drivers/iio/light/cm3605.c
@@ -226,8 +226,10 @@ static int cm3605_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return dev_err_probe(dev, irq, "failed to get irq\n");
+ if (irq < 0) {
+ ret = dev_err_probe(dev, irq, "failed to get irq\n");
+ goto out_disable_aset;
+ }
ret = devm_request_threaded_irq(dev, irq, cm3605_prox_irq,
NULL, 0, "cm3605", indio_dev);
--
2.37.3
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 1fd02d56dae35b08e4cba8e6bd2c2e7ccff68ecc ]
This attempts to fix suspend performance when there is no connections by
not updating the event mask.
Fixes: ef61b6ea1544 ("Bluetooth: Always set event mask on suspend")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_sync.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b5e7d4b8ab24a..2012f23158839 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -4967,17 +4967,21 @@ int hci_suspend_sync(struct hci_dev *hdev)
/* Prevent disconnects from causing scanning to be re-enabled */
hci_pause_scan_sync(hdev);
- /* Soft disconnect everything (power off) */
- err = hci_disconnect_all_sync(hdev, HCI_ERROR_REMOTE_POWER_OFF);
- if (err) {
- /* Set state to BT_RUNNING so resume doesn't notify */
- hdev->suspend_state = BT_RUNNING;
- hci_resume_sync(hdev);
- return err;
- }
+ if (hci_conn_count(hdev)) {
+ /* Soft disconnect everything (power off) */
+ err = hci_disconnect_all_sync(hdev, HCI_ERROR_REMOTE_POWER_OFF);
+ if (err) {
+ /* Set state to BT_RUNNING so resume doesn't notify */
+ hdev->suspend_state = BT_RUNNING;
+ hci_resume_sync(hdev);
+ return err;
+ }
- /* Update event mask so only the allowed event can wakeup the host */
- hci_set_event_mask_sync(hdev);
+ /* Update event mask so only the allowed event can wakeup the
+ * host.
+ */
+ hci_set_event_mask_sync(hdev);
+ }
/* Only configure accept list if disconnect succeeded and wake
* isn't being prevented.
--
2.35.1
From: Fedor Pchelkin <[email protected]>
commit c9ab053e56ce13a949977398c8edc12e6c02fc95 upstream.
A kick_timer timer_list is replaced with kick_timeout delayed_work to be
able to synchronize with mutexes as a prerequisite for the introduction
of tx_mutex.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Suggested-by: Hillf Danton <[email protected]>
Signed-off-by: Fedor Pchelkin <[email protected]>
Signed-off-by: Alexey Khoroshilov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/n_gsm.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index d6598ca3640f..e23225aff5d9 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -256,7 +256,7 @@ struct gsm_mux {
struct list_head tx_data_list; /* Pending data packets */
/* Control messages */
- struct timer_list kick_timer; /* Kick TX queuing on timeout */
+ struct delayed_work kick_timeout; /* Kick TX queuing on timeout */
struct timer_list t2_timer; /* Retransmit timer for commands */
int cretries; /* Command retry counter */
struct gsm_control *pending_cmd;/* Our current pending command */
@@ -1009,7 +1009,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
gsm->tx_bytes += msg->len;
gsmld_write_trigger(gsm);
- mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100);
+ schedule_delayed_work(&gsm->kick_timeout, 10 * gsm->t1 * HZ / 100);
}
/**
@@ -1984,16 +1984,16 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
}
/**
- * gsm_kick_timer - transmit if possible
- * @t: timer contained in our gsm object
+ * gsm_kick_timeout - transmit if possible
+ * @work: work contained in our gsm object
*
* Transmit data from DLCIs if the queue is empty. We can't rely on
* a tty wakeup except when we filled the pipe so we need to fire off
* new data ourselves in other cases.
*/
-static void gsm_kick_timer(struct timer_list *t)
+static void gsm_kick_timeout(struct work_struct *work)
{
- struct gsm_mux *gsm = from_timer(gsm, t, kick_timer);
+ struct gsm_mux *gsm = container_of(work, struct gsm_mux, kick_timeout.work);
unsigned long flags;
int sent = 0;
@@ -2458,7 +2458,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
}
/* Finish outstanding timers, making sure they are done */
- del_timer_sync(&gsm->kick_timer);
+ cancel_delayed_work_sync(&gsm->kick_timeout);
del_timer_sync(&gsm->t2_timer);
/* Finish writing to ldisc */
@@ -2605,7 +2605,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
kref_init(&gsm->ref);
INIT_LIST_HEAD(&gsm->tx_ctrl_list);
INIT_LIST_HEAD(&gsm->tx_data_list);
- timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
+ INIT_DELAYED_WORK(&gsm->kick_timeout, gsm_kick_timeout);
timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
INIT_WORK(&gsm->tx_work, gsmld_write_task);
init_waitqueue_head(&gsm->event);
--
2.37.3
From: Michael Ellerman <[email protected]>
commit 310d1344e3c58cc2d625aa4e52cfcb7d8a26fcbf upstream.
This reverts commit 79b74a68486765a4fe685ac4069bc71366c538f5.
It broke booting on IBM Cell machines when the kernel is also built with
CONFIG_PPC_PS3=y.
That's because FW_FEATURE_NATIVE_ALWAYS = 0 does have an important
effect, which is to clear the PS3 ALWAYS features from
FW_FEATURE_ALWAYS.
Note that CONFIG_PPC_NATIVE has since been renamed
CONFIG_PPC_HASH_MMU_NATIVE.
Fixes: 79b74a684867 ("powerpc: Remove unused FW_FEATURE_NATIVE references")
Cc: [email protected] # v5.17+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/firmware.h | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -82,6 +82,8 @@ enum {
FW_FEATURE_POWERNV_ALWAYS = 0,
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+ FW_FEATURE_NATIVE_POSSIBLE = 0,
+ FW_FEATURE_NATIVE_ALWAYS = 0,
FW_FEATURE_POSSIBLE =
#ifdef CONFIG_PPC_PSERIES
FW_FEATURE_PSERIES_POSSIBLE |
@@ -92,6 +94,9 @@ enum {
#ifdef CONFIG_PPC_PS3
FW_FEATURE_PS3_POSSIBLE |
#endif
+#ifdef CONFIG_PPC_HASH_MMU_NATIVE
+ FW_FEATURE_NATIVE_ALWAYS |
+#endif
0,
FW_FEATURE_ALWAYS =
#ifdef CONFIG_PPC_PSERIES
@@ -103,6 +108,9 @@ enum {
#ifdef CONFIG_PPC_PS3
FW_FEATURE_PS3_ALWAYS &
#endif
+#ifdef CONFIG_PPC_HASH_MMU_NATIVE
+ FW_FEATURE_NATIVE_ALWAYS &
+#endif
FW_FEATURE_POSSIBLE,
#else /* CONFIG_PPC64 */
From: Vadim Pasternak <[email protected]>
[ Upstream commit 1e092b7faa6b507125b69c92a51bb22c2d549d37 ]
Fix locking issues:
- mlxreg_lc_state_update() takes a lock when set or clear
"MLXREG_LC_POWERED".
- All the devices can be deleted before MLXREG_LC_POWERED flag is cleared.
To fix it:
- Add lock() / unlock() at the beginning / end of
mlxreg_lc_event_handler() and remove locking from
mlxreg_lc_power_on_off() and mlxreg_lc_enable_disable()
- Add locked version of mlxreg_lc_state_update() -
mlxreg_lc_state_update_locked() for using outside
mlxreg_lc_event_handler().
(2) Remove redundant NULL check for of if 'data->notifier'.
Fixes: 62f9529b8d5c87b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Vadim Pasternak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/mellanox/mlxreg-lc.c | 37 ++++++++++++++++++---------
1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/drivers/platform/mellanox/mlxreg-lc.c b/drivers/platform/mellanox/mlxreg-lc.c
index 9a1bfcd24317d..e578c7bc060bb 100644
--- a/drivers/platform/mellanox/mlxreg-lc.c
+++ b/drivers/platform/mellanox/mlxreg-lc.c
@@ -460,8 +460,6 @@ static int mlxreg_lc_power_on_off(struct mlxreg_lc *mlxreg_lc, u8 action)
u32 regval;
int err;
- mutex_lock(&mlxreg_lc->lock);
-
err = regmap_read(mlxreg_lc->par_regmap, mlxreg_lc->data->reg_pwr, ®val);
if (err)
goto regmap_read_fail;
@@ -474,7 +472,6 @@ static int mlxreg_lc_power_on_off(struct mlxreg_lc *mlxreg_lc, u8 action)
err = regmap_write(mlxreg_lc->par_regmap, mlxreg_lc->data->reg_pwr, regval);
regmap_read_fail:
- mutex_unlock(&mlxreg_lc->lock);
return err;
}
@@ -491,8 +488,6 @@ static int mlxreg_lc_enable_disable(struct mlxreg_lc *mlxreg_lc, bool action)
* line card which is already has been enabled. Disabling does not affect the disabled line
* card.
*/
- mutex_lock(&mlxreg_lc->lock);
-
err = regmap_read(mlxreg_lc->par_regmap, mlxreg_lc->data->reg_ena, ®val);
if (err)
goto regmap_read_fail;
@@ -505,7 +500,6 @@ static int mlxreg_lc_enable_disable(struct mlxreg_lc *mlxreg_lc, bool action)
err = regmap_write(mlxreg_lc->par_regmap, mlxreg_lc->data->reg_ena, regval);
regmap_read_fail:
- mutex_unlock(&mlxreg_lc->lock);
return err;
}
@@ -537,6 +531,15 @@ mlxreg_lc_sn4800_c16_config_init(struct mlxreg_lc *mlxreg_lc, void *regmap,
static void
mlxreg_lc_state_update(struct mlxreg_lc *mlxreg_lc, enum mlxreg_lc_state state, u8 action)
+{
+ if (action)
+ mlxreg_lc->state |= state;
+ else
+ mlxreg_lc->state &= ~state;
+}
+
+static void
+mlxreg_lc_state_update_locked(struct mlxreg_lc *mlxreg_lc, enum mlxreg_lc_state state, u8 action)
{
mutex_lock(&mlxreg_lc->lock);
@@ -560,8 +563,11 @@ static int mlxreg_lc_event_handler(void *handle, enum mlxreg_hotplug_kind kind,
dev_info(mlxreg_lc->dev, "linecard#%d state %d event kind %d action %d\n",
mlxreg_lc->data->slot, mlxreg_lc->state, kind, action);
- if (!(mlxreg_lc->state & MLXREG_LC_INITIALIZED))
+ mutex_lock(&mlxreg_lc->lock);
+ if (!(mlxreg_lc->state & MLXREG_LC_INITIALIZED)) {
+ mutex_unlock(&mlxreg_lc->lock);
return 0;
+ }
switch (kind) {
case MLXREG_HOTPLUG_LC_SYNCED:
@@ -574,7 +580,7 @@ static int mlxreg_lc_event_handler(void *handle, enum mlxreg_hotplug_kind kind,
if (!(mlxreg_lc->state & MLXREG_LC_POWERED) && action) {
err = mlxreg_lc_power_on_off(mlxreg_lc, 1);
if (err)
- return err;
+ goto mlxreg_lc_power_on_off_fail;
}
/* In case line card is configured - enable it. */
if (mlxreg_lc->state & MLXREG_LC_CONFIGURED && action)
@@ -588,12 +594,13 @@ static int mlxreg_lc_event_handler(void *handle, enum mlxreg_hotplug_kind kind,
/* In case line card is configured - enable it. */
if (mlxreg_lc->state & MLXREG_LC_CONFIGURED)
err = mlxreg_lc_enable_disable(mlxreg_lc, 1);
+ mutex_unlock(&mlxreg_lc->lock);
return err;
}
err = mlxreg_lc_create_static_devices(mlxreg_lc, mlxreg_lc->main_devs,
mlxreg_lc->main_devs_num);
if (err)
- return err;
+ goto mlxreg_lc_create_static_devices_fail;
/* In case line card is already in ready state - enable it. */
if (mlxreg_lc->state & MLXREG_LC_CONFIGURED)
@@ -620,6 +627,10 @@ static int mlxreg_lc_event_handler(void *handle, enum mlxreg_hotplug_kind kind,
break;
}
+mlxreg_lc_power_on_off_fail:
+mlxreg_lc_create_static_devices_fail:
+ mutex_unlock(&mlxreg_lc->lock);
+
return err;
}
@@ -665,7 +676,7 @@ static int mlxreg_lc_completion_notify(void *handle, struct i2c_adapter *parent,
if (err)
goto mlxreg_lc_create_static_devices_failed;
- mlxreg_lc_state_update(mlxreg_lc, MLXREG_LC_POWERED, 1);
+ mlxreg_lc_state_update_locked(mlxreg_lc, MLXREG_LC_POWERED, 1);
}
/* Verify if line card is synchronized. */
@@ -676,7 +687,7 @@ static int mlxreg_lc_completion_notify(void *handle, struct i2c_adapter *parent,
/* Power on line card if necessary. */
if (regval & mlxreg_lc->data->mask) {
mlxreg_lc->state |= MLXREG_LC_SYNCED;
- mlxreg_lc_state_update(mlxreg_lc, MLXREG_LC_SYNCED, 1);
+ mlxreg_lc_state_update_locked(mlxreg_lc, MLXREG_LC_SYNCED, 1);
if (mlxreg_lc->state & ~MLXREG_LC_POWERED) {
err = mlxreg_lc_power_on_off(mlxreg_lc, 1);
if (err)
@@ -684,7 +695,7 @@ static int mlxreg_lc_completion_notify(void *handle, struct i2c_adapter *parent,
}
}
- mlxreg_lc_state_update(mlxreg_lc, MLXREG_LC_INITIALIZED, 1);
+ mlxreg_lc_state_update_locked(mlxreg_lc, MLXREG_LC_INITIALIZED, 1);
return 0;
@@ -904,6 +915,8 @@ static int mlxreg_lc_remove(struct platform_device *pdev)
struct mlxreg_core_data *data = dev_get_platdata(&pdev->dev);
struct mlxreg_lc *mlxreg_lc = platform_get_drvdata(pdev);
+ mlxreg_lc_state_update_locked(mlxreg_lc, MLXREG_LC_INITIALIZED, 0);
+
/*
* Probing and removing are invoked by hotplug events raised upon line card insertion and
* removing. If probing procedure fails all data is cleared. However, hotplug event still
--
2.35.1
From: Tianyu Yuan <[email protected]>
[ Upstream commit ebe5555c2f34505cdb1ae5c3de8b24e33740b3e0 ]
Referenced commit introduced nfp_policer_validate in the progress
installing rate limiter. This validate check the action id and will
reject police with CONTINUE, which is required to support ingress
police offload.
Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action
id in nfp_policer_validate
Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Tianyu Yuan <[email protected]>
Reviewed-by: Baowen Zheng <[email protected]>
Reviewed-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/netronome/nfp/flower/qos_conf.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/flower/qos_conf.c b/drivers/net/ethernet/netronome/nfp/flower/qos_conf.c
index 3206ba83b1aaa..de2ef5bf8c694 100644
--- a/drivers/net/ethernet/netronome/nfp/flower/qos_conf.c
+++ b/drivers/net/ethernet/netronome/nfp/flower/qos_conf.c
@@ -127,10 +127,11 @@ static int nfp_policer_validate(const struct flow_action *action,
return -EOPNOTSUPP;
}
- if (act->police.notexceed.act_id != FLOW_ACTION_PIPE &&
+ if (act->police.notexceed.act_id != FLOW_ACTION_CONTINUE &&
+ act->police.notexceed.act_id != FLOW_ACTION_PIPE &&
act->police.notexceed.act_id != FLOW_ACTION_ACCEPT) {
NL_SET_ERR_MSG_MOD(extack,
- "Offload not supported when conform action is not pipe or ok");
+ "Offload not supported when conform action is not continue, pipe or ok");
return -EOPNOTSUPP;
}
--
2.35.1
From: Daniele Ceraolo Spurio <[email protected]>
commit 4595a25443447b9542b2a5ee7961eb290e94b496 upstream.
If the GuC CTs are full and we need to stall the request submission
while waiting for space, we save the stalled request and where the stall
occurred; when the CTs have space again we pick up the request submission
from where we left off.
If a full GT reset occurs, the state of all contexts is cleared and all
non-guilty requests are unsubmitted, therefore we need to restart the
stalled request submission from scratch. To make sure that we do so,
clear the saved request after a reset.
Fixes note: the patch that introduced the bug is in 5.15, but no
officially supported platform had GuC submission enabled by default
in that kernel, so the backport to that particular version (and only
that one) can potentially be skipped.
Fixes: 925dc1cf58ed ("drm/i915/guc: Implement GuC submission tasklet")
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: John Harrison <[email protected]>
Cc: <[email protected]> # v5.15+
Reviewed-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit f922fbb0f2ad1fd3e3186f39c46673419e6d9281)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -4011,6 +4011,13 @@ static inline void guc_init_lrc_mapping(
xa_destroy(&guc->context_lookup);
/*
+ * A reset might have occurred while we had a pending stalled request,
+ * so make sure we clean that up.
+ */
+ guc->stalled_request = NULL;
+ guc->submission_stall_reason = STALL_NONE;
+
+ /*
* Some contexts might have been pinned before we enabled GuC
* submission, so we need to add them to the GuC bookeeping.
* Also, after a reset the of the GuC we want to make sure that the
From: Adrian Hunter <[email protected]>
commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 upstream.
If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.
Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.
Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.
Reported-by: Seunghui Lee <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Seunghui Lee <[email protected]>
Tested-by: Seunghui Lee <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/sd.c | 42 ++++++++++++++++--------------------------
1 file changed, 16 insertions(+), 26 deletions(-)
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -949,16 +949,17 @@ int mmc_sd_setup_card(struct mmc_host *h
/* Erase init depends on CSD and SSR */
mmc_init_erase(card);
-
- /*
- * Fetch switch information from card.
- */
- err = mmc_read_switch(card);
- if (err)
- return err;
}
/*
+ * Fetch switch information from card. Note, sd3_bus_mode can change if
+ * voltage switch outcome changes, so do this always.
+ */
+ err = mmc_read_switch(card);
+ if (err)
+ return err;
+
+ /*
* For SPI, enable CRC as appropriate.
* This CRC enable is located AFTER the reading of the
* card registers because some SDHC cards are not able
@@ -1480,26 +1481,15 @@ retry:
if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_uhs(host) &&
mmc_sd_card_using_v18(card) &&
host->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
- /*
- * Re-read switch information in case it has changed since
- * oldcard was initialized.
- */
- if (oldcard) {
- err = mmc_read_switch(card);
- if (err)
- goto free_card;
- }
- if (mmc_sd_card_using_v18(card)) {
- if (mmc_host_set_uhs_voltage(host) ||
- mmc_sd_init_uhs_card(card)) {
- v18_fixup_failed = true;
- mmc_power_cycle(host, ocr);
- if (!oldcard)
- mmc_remove_card(card);
- goto retry;
- }
- goto cont;
+ if (mmc_host_set_uhs_voltage(host) ||
+ mmc_sd_init_uhs_card(card)) {
+ v18_fixup_failed = true;
+ mmc_power_cycle(host, ocr);
+ if (!oldcard)
+ mmc_remove_card(card);
+ goto retry;
}
+ goto cont;
}
/* Initialization sequence for UHS-I cards */
From: Casper Andersson <[email protected]>
[ Upstream commit 7498a457ecf7ff2c4d379360aa8f24566bb1543e ]
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would
have the checksum included up to next multiple of 4 (a 77 bytes packet
would have 3 bytes of ethernet checksum included). The check for the
value expects it in host (Little) endian.
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <[email protected]>
Reviewed-by: Steen Hegelund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/microchip/sparx5/sparx5_packet.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
index 304f84aadc36b..21844beba72df 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
@@ -113,6 +113,8 @@ static void sparx5_xtr_grp(struct sparx5 *sparx5, u8 grp, bool byte_swap)
/* This assumes STATUS_WORD_POS == 1, Status
* just after last data
*/
+ if (!byte_swap)
+ val = ntohl((__force __be32)val);
byte_cnt -= (4 - XTR_VALID_BYTES(val));
eof_flag = true;
break;
--
2.35.1
From: Xin Yin <[email protected]>
[ Upstream commit 1122f40072731525c06b1371cfa30112b9b54d27 ]
For now, enqueuing and dequeuing on-demand requests all start from
idx 0, this makes request distribution unfair. In the weighty
concurrent I/O scenario, the request stored in higher idx will starve.
Searching requests cyclically in cachefiles_ondemand_daemon_read,
makes distribution fairer.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Reported-by: Yongqing Li <[email protected]>
Signed-off-by: Xin Yin <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeffle Xu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ # v1
Link: https://lore.kernel.org/r/[email protected]/ # v2
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/internal.h | 1 +
fs/cachefiles/ondemand.c | 12 +++++++++---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h
index 6cba2c6de2f96..2ad58c4652084 100644
--- a/fs/cachefiles/internal.h
+++ b/fs/cachefiles/internal.h
@@ -111,6 +111,7 @@ struct cachefiles_cache {
char *tag; /* cache binding tag */
refcount_t unbind_pincount;/* refcount to do daemon unbind */
struct xarray reqs; /* xarray of pending on-demand requests */
+ unsigned long req_id_next;
struct xarray ondemand_ids; /* xarray for ondemand_id allocation */
u32 ondemand_id_next;
};
diff --git a/fs/cachefiles/ondemand.c b/fs/cachefiles/ondemand.c
index 7e1586bd5cf34..0254ed39f68ce 100644
--- a/fs/cachefiles/ondemand.c
+++ b/fs/cachefiles/ondemand.c
@@ -242,14 +242,19 @@ ssize_t cachefiles_ondemand_daemon_read(struct cachefiles_cache *cache,
unsigned long id = 0;
size_t n;
int ret = 0;
- XA_STATE(xas, &cache->reqs, 0);
+ XA_STATE(xas, &cache->reqs, cache->req_id_next);
/*
- * Search for a request that has not ever been processed, to prevent
- * requests from being processed repeatedly.
+ * Cyclically search for a request that has not ever been processed,
+ * to prevent requests from being processed repeatedly, and make
+ * request distribution fair.
*/
xa_lock(&cache->reqs);
req = xas_find_marked(&xas, UINT_MAX, CACHEFILES_REQ_NEW);
+ if (!req && cache->req_id_next > 0) {
+ xas_set(&xas, 0);
+ req = xas_find_marked(&xas, cache->req_id_next - 1, CACHEFILES_REQ_NEW);
+ }
if (!req) {
xa_unlock(&cache->reqs);
return 0;
@@ -264,6 +269,7 @@ ssize_t cachefiles_ondemand_daemon_read(struct cachefiles_cache *cache,
}
xas_clear_mark(&xas, CACHEFILES_REQ_NEW);
+ cache->req_id_next = xas.xa_index + 1;
xa_unlock(&cache->reqs);
id = xas.xa_index;
--
2.35.1
From: Sherry Sun <[email protected]>
commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream.
When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.
Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <[email protected]>
Signed-off-by: Sherry Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2182,6 +2182,7 @@ lpuart32_set_termios(struct uart_port *p
uart_update_timeout(port, termios->c_cflag, baud);
/* wait transmit engin complete */
+ lpuart32_write(&sport->port, 0, UARTMODIR);
lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
/* disable transmit and receive */
From: Jim Mattson <[email protected]>
[ Upstream commit 020dac4187968535f089f83f376a72beb3451311 ]
Regardless of the 'msr' argument passed to the VMX version of
msr_write_intercepted(), the function always checks to see if a
specific MSR (IA32_SPEC_CTRL) is intercepted for write. This behavior
seems unintentional and unexpected.
Modify the function so that it checks to see if the provided 'msr'
index is intercepted for write.
Fixes: 67f4b9969c30 ("KVM: nVMX: Handle dynamic MSR intercept toggling")
Cc: Sean Christopherson <[email protected]>
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx/vmx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 0aaea87a14597..b09a50e0af29d 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -835,8 +835,7 @@ static bool msr_write_intercepted(struct vcpu_vmx *vmx, u32 msr)
if (!(exec_controls_get(vmx) & CPU_BASED_USE_MSR_BITMAPS))
return true;
- return vmx_test_msr_bitmap_write(vmx->loaded_vmcs->msr_bitmap,
- MSR_IA32_SPEC_CTRL);
+ return vmx_test_msr_bitmap_write(vmx->loaded_vmcs->msr_bitmap, msr);
}
unsigned int __vmx_vcpu_run_flags(struct vcpu_vmx *vmx)
--
2.35.1
From: Johan Hovold <[email protected]>
commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream.
Generic PHYs must be powered-off before they can be tore down.
Similarly, suspending legacy PHYs after having powered them off makes no
sense.
Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded
dwc3_probe() error-path sequences that got this wrong.
Note that this makes dwc3_core_exit() match the dwc3_core_init() error
path with respect to powering off the PHYs.
Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling")
Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: [email protected] # 4.8
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/core.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -833,15 +833,16 @@ static void dwc3_core_exit(struct dwc3 *
{
dwc3_event_buffers_cleanup(dwc);
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);
+
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
- usb_phy_set_suspend(dwc->usb2_phy, 1);
- usb_phy_set_suspend(dwc->usb3_phy, 1);
- phy_power_off(dwc->usb2_generic_phy);
- phy_power_off(dwc->usb3_generic_phy);
dwc3_clk_disable(dwc);
reset_control_assert(dwc->reset);
}
@@ -1844,16 +1845,16 @@ err5:
dwc3_debugfs_exit(dwc);
dwc3_event_buffers_cleanup(dwc);
- usb_phy_shutdown(dwc->usb2_phy);
- usb_phy_shutdown(dwc->usb3_phy);
- phy_exit(dwc->usb2_generic_phy);
- phy_exit(dwc->usb3_generic_phy);
-
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
+ usb_phy_shutdown(dwc->usb2_phy);
+ usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
+
dwc3_ulpi_exit(dwc);
err4:
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 3f8ae9fe0409698799e173f698b714f34570b64b ]
xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.
Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.
Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.
Fixes: ee00b24f32eb8 ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: George McCollister <[email protected]>
Cc: Vivien Didelot <[email protected]>
Cc: Vladimir Oltean <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: George McCollister <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/xrs700x/xrs700x.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index 3887ed33c5fe2..fa622639d6401 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -109,6 +109,7 @@ static void xrs700x_read_port_counters(struct xrs700x *priv, int port)
{
struct xrs700x_port *p = &priv->ports[port];
struct rtnl_link_stats64 stats;
+ unsigned long flags;
int i;
memset(&stats, 0, sizeof(stats));
@@ -138,9 +139,9 @@ static void xrs700x_read_port_counters(struct xrs700x *priv, int port)
*/
stats.rx_packets += stats.multicast;
- u64_stats_update_begin(&p->syncp);
+ flags = u64_stats_update_begin_irqsave(&p->syncp);
p->stats64 = stats;
- u64_stats_update_end(&p->syncp);
+ u64_stats_update_end_irqrestore(&p->syncp, flags);
mutex_unlock(&p->mib_mutex);
}
--
2.35.1
From: Kajol Jain <[email protected]>
[ Upstream commit 9b1ac04698a4bfec146322502cdcd9904c1777fa ]
Commit 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support")
added performance monitoring support for papr-scm nvdimm devices via
perf interface. Commit also added an array in papr_scm_priv
structure called "nvdimm_events_map", which got filled based on the
result of H_SCM_PERFORMANCE_STATS hcall.
Currently there is an assumption that the order of events in the
stats buffer, returned by the hypervisor is same. And order also
happens to matches with the events specified in nvdimm driver code.
But this assumption is not documented in Power Architecture
Platform Requirements (PAPR) document. Although the order
of events happens to be same on current generation od system, but
it might not be true in future generation systems. Fix the issue, by
adding a static mapping for nvdimm events to corresponding stat-id,
and removing the dynamic map from papr_scm_priv structure. Also
remove the function papr_scm_pmu_check_events from papr_scm.c file,
as we no longer need to copy stat-ids dynamically.
Fixes: 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support")
Reported-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Reviewed-by: Vaibhav Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/papr_scm.c | 88 +++++++----------------
1 file changed, 27 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 82cae08976bcd..16bac4e0d7a21 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -124,9 +124,6 @@ struct papr_scm_priv {
/* The bits which needs to be overridden */
u64 health_bitmap_inject_mask;
-
- /* array to have event_code and stat_id mappings */
- u8 *nvdimm_events_map;
};
static int papr_scm_pmem_flush(struct nd_region *nd_region,
@@ -350,6 +347,25 @@ static ssize_t drc_pmem_query_stats(struct papr_scm_priv *p,
#ifdef CONFIG_PERF_EVENTS
#define to_nvdimm_pmu(_pmu) container_of(_pmu, struct nvdimm_pmu, pmu)
+static const char * const nvdimm_events_map[] = {
+ [1] = "CtlResCt",
+ [2] = "CtlResTm",
+ [3] = "PonSecs ",
+ [4] = "MemLife ",
+ [5] = "CritRscU",
+ [6] = "HostLCnt",
+ [7] = "HostSCnt",
+ [8] = "HostSDur",
+ [9] = "HostLDur",
+ [10] = "MedRCnt ",
+ [11] = "MedWCnt ",
+ [12] = "MedRDur ",
+ [13] = "MedWDur ",
+ [14] = "CchRHCnt",
+ [15] = "CchWHCnt",
+ [16] = "FastWCnt",
+};
+
static int papr_scm_pmu_get_value(struct perf_event *event, struct device *dev, u64 *count)
{
struct papr_scm_perf_stat *stat;
@@ -357,11 +373,15 @@ static int papr_scm_pmu_get_value(struct perf_event *event, struct device *dev,
struct papr_scm_priv *p = (struct papr_scm_priv *)dev->driver_data;
int rc, size;
+ /* Invalid eventcode */
+ if (event->attr.config == 0 || event->attr.config >= ARRAY_SIZE(nvdimm_events_map))
+ return -EINVAL;
+
/* Allocate request buffer enough to hold single performance stat */
size = sizeof(struct papr_scm_perf_stats) +
sizeof(struct papr_scm_perf_stat);
- if (!p || !p->nvdimm_events_map)
+ if (!p)
return -EINVAL;
stats = kzalloc(size, GFP_KERNEL);
@@ -370,7 +390,7 @@ static int papr_scm_pmu_get_value(struct perf_event *event, struct device *dev,
stat = &stats->scm_statistic[0];
memcpy(&stat->stat_id,
- &p->nvdimm_events_map[event->attr.config * sizeof(stat->stat_id)],
+ nvdimm_events_map[event->attr.config],
sizeof(stat->stat_id));
stat->stat_val = 0;
@@ -458,56 +478,6 @@ static void papr_scm_pmu_del(struct perf_event *event, int flags)
papr_scm_pmu_read(event);
}
-static int papr_scm_pmu_check_events(struct papr_scm_priv *p, struct nvdimm_pmu *nd_pmu)
-{
- struct papr_scm_perf_stat *stat;
- struct papr_scm_perf_stats *stats;
- u32 available_events;
- int index, rc = 0;
-
- if (!p->stat_buffer_len)
- return -ENOENT;
-
- available_events = (p->stat_buffer_len - sizeof(struct papr_scm_perf_stats))
- / sizeof(struct papr_scm_perf_stat);
- if (available_events == 0)
- return -EOPNOTSUPP;
-
- /* Allocate the buffer for phyp where stats are written */
- stats = kzalloc(p->stat_buffer_len, GFP_KERNEL);
- if (!stats) {
- rc = -ENOMEM;
- return rc;
- }
-
- /* Called to get list of events supported */
- rc = drc_pmem_query_stats(p, stats, 0);
- if (rc)
- goto out;
-
- /*
- * Allocate memory and populate nvdimm_event_map.
- * Allocate an extra element for NULL entry
- */
- p->nvdimm_events_map = kcalloc(available_events + 1,
- sizeof(stat->stat_id),
- GFP_KERNEL);
- if (!p->nvdimm_events_map) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Copy all stat_ids to event map */
- for (index = 0, stat = stats->scm_statistic;
- index < available_events; index++, ++stat) {
- memcpy(&p->nvdimm_events_map[index * sizeof(stat->stat_id)],
- &stat->stat_id, sizeof(stat->stat_id));
- }
-out:
- kfree(stats);
- return rc;
-}
-
static void papr_scm_pmu_register(struct papr_scm_priv *p)
{
struct nvdimm_pmu *nd_pmu;
@@ -519,8 +489,7 @@ static void papr_scm_pmu_register(struct papr_scm_priv *p)
goto pmu_err_print;
}
- rc = papr_scm_pmu_check_events(p, nd_pmu);
- if (rc)
+ if (!p->stat_buffer_len)
goto pmu_check_events_err;
nd_pmu->pmu.task_ctx_nr = perf_invalid_context;
@@ -539,7 +508,7 @@ static void papr_scm_pmu_register(struct papr_scm_priv *p)
rc = register_nvdimm_pmu(nd_pmu, p->pdev);
if (rc)
- goto pmu_register_err;
+ goto pmu_check_events_err;
/*
* Set archdata.priv value to nvdimm_pmu structure, to handle the
@@ -548,8 +517,6 @@ static void papr_scm_pmu_register(struct papr_scm_priv *p)
p->pdev->archdata.priv = nd_pmu;
return;
-pmu_register_err:
- kfree(p->nvdimm_events_map);
pmu_check_events_err:
kfree(nd_pmu);
pmu_err_print:
@@ -1560,7 +1527,6 @@ static int papr_scm_remove(struct platform_device *pdev)
unregister_nvdimm_pmu(pdev->archdata.priv);
pdev->archdata.priv = NULL;
- kfree(p->nvdimm_events_map);
kfree(p->bus_desc.provider_name);
kfree(p);
--
2.35.1
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 90fabae8a2c225c4e4936723c38857887edde5cc ]
When the GSO splitting feature of sch_cake is enabled, GSO superpackets
will be broken up and the resulting segments enqueued in place of the
original skb. In this case, CAKE calls consume_skb() on the original skb,
but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into
assuming the original skb still exists, when it really has been freed. Fix
this by adding the __NET_XMIT_STOLEN flag to the return value in this case.
Fixes: 0c850344d388 ("sch_cake: Conditionally split GSO segments")
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Reported-by: [email protected] # ZDI-CAN-18231
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_cake.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index a43a58a73d096..a04928082e4ab 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -1713,6 +1713,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
}
idx--;
flow = &b->flows[idx];
+ ret = NET_XMIT_SUCCESS;
/* ensure shaper state isn't stale */
if (!b->tin_backlog) {
@@ -1771,6 +1772,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
qdisc_tree_reduce_backlog(sch, 1-numsegs, len-slen);
consume_skb(skb);
+ ret |= __NET_XMIT_STOLEN;
} else {
/* not splitting */
cobalt_set_enqueue_time(skb, now);
@@ -1904,7 +1906,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
}
b->drop_overlimit += dropped;
}
- return NET_XMIT_SUCCESS;
+ return ret;
}
static struct sk_buff *cake_dequeue_one(struct Qdisc *sch)
--
2.35.1
From: Stephen Boyd <[email protected]>
[ Upstream commit abb5f3f4b1f5f0ad50eb067a00051d3587dec9fb ]
This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander
reports that it causes boot failures on i.MX8M Plus based boards
(specifically imx8mp-tqma8mpql-mba8mpxl.dts).
Reported-by: Alexander Stein <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops")
Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w
Signed-off-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 28 ----------------------------
1 file changed, 28 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 03427e3be727f..f00d4c1158d72 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -196,9 +196,6 @@ static bool clk_core_rate_is_protected(struct clk_core *core)
return core->protect_count;
}
-static int clk_core_prepare_enable(struct clk_core *core);
-static void clk_core_disable_unprepare(struct clk_core *core);
-
static bool clk_core_is_prepared(struct clk_core *core)
{
bool ret = false;
@@ -211,11 +208,7 @@ static bool clk_core_is_prepared(struct clk_core *core)
return core->prepare_count;
if (!clk_pm_runtime_get(core)) {
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_prepare_enable(core->parent);
ret = core->ops->is_prepared(core->hw);
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_disable_unprepare(core->parent);
clk_pm_runtime_put(core);
}
@@ -251,13 +244,7 @@ static bool clk_core_is_enabled(struct clk_core *core)
}
}
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_prepare_enable(core->parent);
-
ret = core->ops->is_enabled(core->hw);
-
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_disable_unprepare(core->parent);
done:
if (core->rpm_enabled)
pm_runtime_put(core->dev);
@@ -825,9 +812,6 @@ int clk_rate_exclusive_get(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_rate_exclusive_get);
-static int clk_core_enable_lock(struct clk_core *core);
-static void clk_core_disable_lock(struct clk_core *core);
-
static void clk_core_unprepare(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
@@ -851,9 +835,6 @@ static void clk_core_unprepare(struct clk_core *core)
WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name);
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_enable_lock(core->parent);
-
trace_clk_unprepare(core);
if (core->ops->unprepare)
@@ -862,9 +843,6 @@ static void clk_core_unprepare(struct clk_core *core)
clk_pm_runtime_put(core);
trace_clk_unprepare_complete(core);
-
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_disable_lock(core->parent);
clk_core_unprepare(core->parent);
}
@@ -913,9 +891,6 @@ static int clk_core_prepare(struct clk_core *core)
if (ret)
goto runtime_put;
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_enable_lock(core->parent);
-
trace_clk_prepare(core);
if (core->ops->prepare)
@@ -923,9 +898,6 @@ static int clk_core_prepare(struct clk_core *core)
trace_clk_prepare_complete(core);
- if (core->flags & CLK_OPS_PARENT_ENABLE)
- clk_core_disable_lock(core->parent);
-
if (ret)
goto unprepare;
}
--
2.35.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 35b0fac808b95eea1212f8860baf6ad25b88b087 ]
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.
This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.
Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Nícolas F. R. A. Prado <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f00d4c1158d72..03427e3be727f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -196,6 +196,9 @@ static bool clk_core_rate_is_protected(struct clk_core *core)
return core->protect_count;
}
+static int clk_core_prepare_enable(struct clk_core *core);
+static void clk_core_disable_unprepare(struct clk_core *core);
+
static bool clk_core_is_prepared(struct clk_core *core)
{
bool ret = false;
@@ -208,7 +211,11 @@ static bool clk_core_is_prepared(struct clk_core *core)
return core->prepare_count;
if (!clk_pm_runtime_get(core)) {
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_prepare_enable(core->parent);
ret = core->ops->is_prepared(core->hw);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_unprepare(core->parent);
clk_pm_runtime_put(core);
}
@@ -244,7 +251,13 @@ static bool clk_core_is_enabled(struct clk_core *core)
}
}
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_prepare_enable(core->parent);
+
ret = core->ops->is_enabled(core->hw);
+
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_unprepare(core->parent);
done:
if (core->rpm_enabled)
pm_runtime_put(core->dev);
@@ -812,6 +825,9 @@ int clk_rate_exclusive_get(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_rate_exclusive_get);
+static int clk_core_enable_lock(struct clk_core *core);
+static void clk_core_disable_lock(struct clk_core *core);
+
static void clk_core_unprepare(struct clk_core *core)
{
lockdep_assert_held(&prepare_lock);
@@ -835,6 +851,9 @@ static void clk_core_unprepare(struct clk_core *core)
WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_enable_lock(core->parent);
+
trace_clk_unprepare(core);
if (core->ops->unprepare)
@@ -843,6 +862,9 @@ static void clk_core_unprepare(struct clk_core *core)
clk_pm_runtime_put(core);
trace_clk_unprepare_complete(core);
+
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_lock(core->parent);
clk_core_unprepare(core->parent);
}
@@ -891,6 +913,9 @@ static int clk_core_prepare(struct clk_core *core)
if (ret)
goto runtime_put;
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_enable_lock(core->parent);
+
trace_clk_prepare(core);
if (core->ops->prepare)
@@ -898,6 +923,9 @@ static int clk_core_prepare(struct clk_core *core)
trace_clk_prepare_complete(core);
+ if (core->flags & CLK_OPS_PARENT_ENABLE)
+ clk_core_disable_lock(core->parent);
+
if (ret)
goto unprepare;
}
--
2.35.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 8c70521238b7863c2af607e20bcba20f974c969b ]
challenge_timestamp can be read an written by concurrent threads.
This was expected, but we need to annotate the race to avoid potential issues.
Following patch moves challenge_timestamp and challenge_count
to per-netns storage to provide better isolation.
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_input.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index b1637990d5708..e5435156e545d 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3630,11 +3630,11 @@ static void tcp_send_challenge_ack(struct sock *sk)
/* Then check host-wide RFC 5961 rate limit. */
now = jiffies / HZ;
- if (now != challenge_timestamp) {
+ if (now != READ_ONCE(challenge_timestamp)) {
u32 ack_limit = READ_ONCE(net->ipv4.sysctl_tcp_challenge_ack_limit);
u32 half = (ack_limit + 1) >> 1;
- challenge_timestamp = now;
+ WRITE_ONCE(challenge_timestamp, now);
WRITE_ONCE(challenge_count, half + prandom_u32_max(ack_limit));
}
count = READ_ONCE(challenge_count);
--
2.35.1
From: Mathias Nyman <[email protected]>
commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream.
After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.
It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.
In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.
If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.
So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.
Cc: [email protected]
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 11 +++++++++++
drivers/usb/host/xhci.c | 4 +++-
drivers/usb/host/xhci.h | 2 +-
3 files changed, 15 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1648,6 +1648,17 @@ int xhci_hub_status_data(struct usb_hcd
status = bus_state->resuming_ports;
+ /*
+ * SS devices are only visible to roothub after link training completes.
+ * Keep polling roothubs for a grace period after xHC start
+ */
+ if (xhci->run_graceperiod) {
+ if (time_before(jiffies, xhci->run_graceperiod))
+ status = 1;
+ else
+ xhci->run_graceperiod = 0;
+ }
+
mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
/* For each port, did anything change? If so, set that bit in buf. */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -151,9 +151,11 @@ int xhci_start(struct xhci_hcd *xhci)
xhci_err(xhci, "Host took too long to start, "
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
- if (!ret)
+ if (!ret) {
/* clear state flags. Including dying, halted or removing */
xhci->xhc_state = 0;
+ xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+ }
return ret;
}
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1826,7 +1826,7 @@ struct xhci_hcd {
/* Host controller watchdog timer structures */
unsigned int xhc_state;
-
+ unsigned long run_graceperiod;
u32 command;
struct s3_save s3;
/* Host controller is dying - not responding to commands. "I'm not dead yet!"
From: Josh Poimboeuf <[email protected]>
commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream.
Add proper alignment for .nospec_call_table and .nospec_return_table in
vmlinux.
[[email protected]]: The problem with the missing alignment of the nospec
tables exist since a long time, however only since commit e6ed91fd0768
("s390/alternatives: remove padding generation code") and with
CONFIG_RELOCATABLE=n the kernel may also crash at boot time.
The above named commit reduced the size of struct alt_instr by one byte,
so its new size is 11 bytes. Therefore depending on the number of cpu
alternatives the size of the __alt_instructions array maybe odd, which
again also causes that the addresses of the nospec tables will be odd.
If the address of __nospec_call_start is odd and the kernel is compiled
With CONFIG_RELOCATABLE=n the compiler may generate code that loads the
address of __nospec_call_start with a 'larl' instruction.
This will generate incorrect code since the 'larl' instruction only works
with even addresses. In result the members of the nospec tables will be
accessed with an off-by-one offset, which subsequently may lead to
addressing exceptions within __nospec_revert().
Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Josh Poimboeuf <[email protected]>
Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org
Cc: <[email protected]> # 4.16
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/vmlinux.lds.S | 1 +
1 file changed, 1 insertion(+)
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -131,6 +131,7 @@ SECTIONS
/*
* Table with the patch locations to undo expolines
*/
+ . = ALIGN(4);
.nospec_call_table : {
__nospec_call_start = . ;
*(.s390_indirect*)
From: Horatiu Vultur <[email protected]>
[ Upstream commit 4a4ce82212ef014d70f486a427005b2b5bab8e34 ]
The same GPIO line can be shared by multiple phys for the coma mode pin.
If that is the case then, all the other phys that share the same line
will failed to be probed because the access to the gpio line is not
non-exclusive.
Fix this by making access to the gpio line to be nonexclusive using flag
GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be
probed.
Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO")
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/micrel.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 22139901f01c7..34483a4bd688a 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -2838,12 +2838,18 @@ static int lan8814_config_init(struct phy_device *phydev)
return 0;
}
+/* It is expected that there will not be any 'lan8814_take_coma_mode'
+ * function called in suspend. Because the GPIO line can be shared, so if one of
+ * the phys goes back in coma mode, then all the other PHYs will go, which is
+ * wrong.
+ */
static int lan8814_release_coma_mode(struct phy_device *phydev)
{
struct gpio_desc *gpiod;
gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode",
- GPIOD_OUT_HIGH_OPEN_DRAIN);
+ GPIOD_OUT_HIGH_OPEN_DRAIN |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
--
2.35.1
From: Grzegorz Szymaszek <[email protected]>
commit b2fa9e13bbf101c662c4cd974608242a0db98cfc upstream.
The old rtl8188eu module, removed in commit 55dfa29b43d2 ("staging:
rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel
v5.15-rc1), required (through a MODULE_FIRMWARE call()) the
rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no
longer requires.
I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by
both drivers, they do not work when using the new one and the firmware
wasn't manually loaded. According to Larry Finger, the module
maintainer, all such cards need the firmware and the driver should
depend on it (see the linked mails).
Add a proper MODULE_FIRMWARE() call, like it was done in the old driver.
Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my
questions.
Cc: stable <[email protected]>
Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611
Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/
Signed-off-by: Grzegorz Szymaszek <[email protected]>
Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00
Acked-by: Phillip Potter <[email protected]>
Acked-by: Larry Finger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/r8188eu/os_dep/os_intfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/r8188eu/os_dep/os_intfs.c
+++ b/drivers/staging/r8188eu/os_dep/os_intfs.c
@@ -18,6 +18,7 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek Wireless Lan Driver");
MODULE_AUTHOR("Realtek Semiconductor Corp.");
MODULE_VERSION(DRIVERVERSION);
+MODULE_FIRMWARE("rtlwifi/rtl8188eufw.bin");
#define CONFIG_BR_EXT_BRNAME "br0"
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
From: Wesley Cheng <[email protected]>
commit 040f2dbd2010c43f33ad27249e6dac48456f4d99 upstream.
Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions. If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop. Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.
This patch depends on
commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()")
Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <[email protected]>
Signed-off-by: Wesley Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2538,9 +2538,6 @@ static int dwc3_gadget_pullup(struct usb
is_on = !!is_on;
- if (dwc->pullups_connected == is_on)
- return 0;
-
dwc->softconnect = is_on;
/*
@@ -2564,6 +2561,11 @@ static int dwc3_gadget_pullup(struct usb
pm_runtime_put(dwc->dev);
return 0;
}
+
+ if (dwc->pullups_connected == is_on) {
+ pm_runtime_put(dwc->dev);
+ return 0;
+ }
if (!is_on) {
ret = dwc3_gadget_soft_disconnect(dwc);
From: Marcus Folkesson <[email protected]>
commit 9e2238e3ae40d371a1130226e0e740aa1601efa6 upstream.
The ADC conversion is actually not rail-to-rail but with a factor 1.5.
Make use of this factor when calculating actual voltage.
Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/mcp3911.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -40,8 +40,8 @@
#define MCP3911_CHANNEL(x) (MCP3911_REG_CHANNEL0 + x * 3)
#define MCP3911_OFFCAL(x) (MCP3911_REG_OFFCAL_CH0 + x * 6)
-/* Internal voltage reference in uV */
-#define MCP3911_INT_VREF_UV 1200000
+/* Internal voltage reference in mV */
+#define MCP3911_INT_VREF_MV 1200
#define MCP3911_REG_READ(reg, id) ((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff)
#define MCP3911_REG_WRITE(reg, id) ((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff)
@@ -139,11 +139,18 @@ static int mcp3911_read_raw(struct iio_d
*val = ret / 1000;
} else {
- *val = MCP3911_INT_VREF_UV;
+ *val = MCP3911_INT_VREF_MV;
}
- *val2 = 24;
- ret = IIO_VAL_FRACTIONAL_LOG2;
+ /*
+ * For 24bit Conversion
+ * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
+ * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
+ */
+
+ /* val2 = (2^23 * 1.5) */
+ *val2 = 12582912;
+ ret = IIO_VAL_FRACTIONAL;
break;
}
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit 508362ac66b0478affb4e52cb8da98478312d72d ]
Before this commit, the BPF verifier required ARG_PTR_TO_MEM arguments
to be followed by ARG_CONST_SIZE holding the size of the memory region.
The helpers had to check that size in runtime.
There are cases where the size expected by a helper is a compile-time
constant. Checking it in runtime is an unnecessary overhead and waste of
BPF registers.
This commit allows helpers to accept pointers to memory without the
corresponding ARG_CONST_SIZE, given that they define the memory region
size in struct bpf_func_proto and use ARG_PTR_TO_FIXED_SIZE_MEM type.
arg_size is unionized with arg_btf_id to reduce the kernel image size,
and it's valid because they are used by different argument types.
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf.h | 13 +++++++++++++
kernel/bpf/verifier.c | 43 ++++++++++++++++++++++++++++++++-----------
2 files changed, 45 insertions(+), 11 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 7424cf234ae03..ed352c00330cd 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -398,6 +398,9 @@ enum bpf_type_flag {
/* DYNPTR points to a ringbuf record. */
DYNPTR_TYPE_RINGBUF = BIT(9 + BPF_BASE_TYPE_BITS),
+ /* Size is known at compile time. */
+ MEM_FIXED_SIZE = BIT(10 + BPF_BASE_TYPE_BITS),
+
__BPF_TYPE_FLAG_MAX,
__BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1,
};
@@ -461,6 +464,8 @@ enum bpf_arg_type {
* all bytes or clear them in error case.
*/
ARG_PTR_TO_UNINIT_MEM = MEM_UNINIT | ARG_PTR_TO_MEM,
+ /* Pointer to valid memory of size known at compile time. */
+ ARG_PTR_TO_FIXED_SIZE_MEM = MEM_FIXED_SIZE | ARG_PTR_TO_MEM,
/* This must be the last entry. Its purpose is to ensure the enum is
* wide enough to hold the higher bits reserved for bpf_type_flag.
@@ -526,6 +531,14 @@ struct bpf_func_proto {
u32 *arg5_btf_id;
};
u32 *arg_btf_id[5];
+ struct {
+ size_t arg1_size;
+ size_t arg2_size;
+ size_t arg3_size;
+ size_t arg4_size;
+ size_t arg5_size;
+ };
+ size_t arg_size[5];
};
int *ret_btf_id; /* return value btf_id */
bool (*allowed)(const struct bpf_prog *prog);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 0e45d405f151c..f0dd73bf69ddf 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5847,6 +5847,7 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
struct bpf_reg_state *regs = cur_regs(env), *reg = ®s[regno];
enum bpf_arg_type arg_type = fn->arg_type[arg];
enum bpf_reg_type type = reg->type;
+ u32 *arg_btf_id = NULL;
int err = 0;
if (arg_type == ARG_DONTCARE)
@@ -5883,7 +5884,11 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
*/
goto skip_type_check;
- err = check_reg_type(env, regno, arg_type, fn->arg_btf_id[arg], meta);
+ /* arg_btf_id and arg_size are in a union. */
+ if (base_type(arg_type) == ARG_PTR_TO_BTF_ID)
+ arg_btf_id = fn->arg_btf_id[arg];
+
+ err = check_reg_type(env, regno, arg_type, arg_btf_id, meta);
if (err)
return err;
@@ -6010,6 +6015,11 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
* next is_mem_size argument below.
*/
meta->raw_mode = arg_type & MEM_UNINIT;
+ if (arg_type & MEM_FIXED_SIZE) {
+ err = check_helper_mem_access(env, regno,
+ fn->arg_size[arg], false,
+ meta);
+ }
} else if (arg_type_is_mem_size(arg_type)) {
bool zero_size_allowed = (arg_type == ARG_CONST_SIZE_OR_ZERO);
@@ -6400,11 +6410,19 @@ static bool check_raw_mode_ok(const struct bpf_func_proto *fn)
return count <= 1;
}
-static bool check_args_pair_invalid(enum bpf_arg_type arg_curr,
- enum bpf_arg_type arg_next)
+static bool check_args_pair_invalid(const struct bpf_func_proto *fn, int arg)
{
- return (base_type(arg_curr) == ARG_PTR_TO_MEM) !=
- arg_type_is_mem_size(arg_next);
+ bool is_fixed = fn->arg_type[arg] & MEM_FIXED_SIZE;
+ bool has_size = fn->arg_size[arg] != 0;
+ bool is_next_size = false;
+
+ if (arg + 1 < ARRAY_SIZE(fn->arg_type))
+ is_next_size = arg_type_is_mem_size(fn->arg_type[arg + 1]);
+
+ if (base_type(fn->arg_type[arg]) != ARG_PTR_TO_MEM)
+ return is_next_size;
+
+ return has_size == is_next_size || is_next_size == is_fixed;
}
static bool check_arg_pair_ok(const struct bpf_func_proto *fn)
@@ -6415,11 +6433,11 @@ static bool check_arg_pair_ok(const struct bpf_func_proto *fn)
* helper function specification.
*/
if (arg_type_is_mem_size(fn->arg1_type) ||
- base_type(fn->arg5_type) == ARG_PTR_TO_MEM ||
- check_args_pair_invalid(fn->arg1_type, fn->arg2_type) ||
- check_args_pair_invalid(fn->arg2_type, fn->arg3_type) ||
- check_args_pair_invalid(fn->arg3_type, fn->arg4_type) ||
- check_args_pair_invalid(fn->arg4_type, fn->arg5_type))
+ check_args_pair_invalid(fn, 0) ||
+ check_args_pair_invalid(fn, 1) ||
+ check_args_pair_invalid(fn, 2) ||
+ check_args_pair_invalid(fn, 3) ||
+ check_args_pair_invalid(fn, 4))
return false;
return true;
@@ -6460,7 +6478,10 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn)
if (base_type(fn->arg_type[i]) == ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])
return false;
- if (base_type(fn->arg_type[i]) != ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i])
+ if (base_type(fn->arg_type[i]) != ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i] &&
+ /* arg_btf_id and arg_size are in a union. */
+ (base_type(fn->arg_type[i]) != ARG_PTR_TO_MEM ||
+ !(fn->arg_type[i] & MEM_FIXED_SIZE)))
return false;
}
--
2.35.1
From: Russ Weight <[email protected]>
commit 8b40c38e37492b5bdf8e95b46b5cca9517a9957a upstream.
In the following code within firmware_upload_unregister(), the call to
device_unregister() could result in the dev_release function freeing the
fw_upload_priv structure before it is dereferenced for the call to
module_put(). This bug was found by the kernel test robot using
CONFIG_KASAN while running the firmware selftests.
device_unregister(&fw_sysfs->dev);
module_put(fw_upload_priv->module);
The problem is fixed by copying fw_upload_priv->module to a local variable
for use when calling device_unregister().
Fixes: 97730bbb242c ("firmware_loader: Add firmware-upload support")
Cc: stable <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Matthew Gerlach <[email protected]>
Signed-off-by: Russ Weight <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/firmware_loader/sysfs_upload.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/base/firmware_loader/sysfs_upload.c
+++ b/drivers/base/firmware_loader/sysfs_upload.c
@@ -377,6 +377,7 @@ void firmware_upload_unregister(struct f
{
struct fw_sysfs *fw_sysfs = fw_upload->priv;
struct fw_upload_priv *fw_upload_priv = fw_sysfs->fw_upload_priv;
+ struct module *module = fw_upload_priv->module;
mutex_lock(&fw_upload_priv->lock);
if (fw_upload_priv->progress == FW_UPLOAD_PROG_IDLE) {
@@ -392,6 +393,6 @@ void firmware_upload_unregister(struct f
unregister:
device_unregister(&fw_sysfs->dev);
- module_put(fw_upload_priv->module);
+ module_put(module);
}
EXPORT_SYMBOL_GPL(firmware_upload_unregister);
From: Andrey Zhadchenko <[email protected]>
[ Upstream commit a87406f4adee9c53b311d8a1ba2849c69e29a6d0 ]
ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids()
allocates array via kmalloc.
If for some reason new_vport() fails during ovs_dp_cmd_new()
dp->upcall_portids must be freed.
Add missing kfree.
Kmemleak example:
unreferenced object 0xffff88800c382500 (size 64):
comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s)
hex dump (first 32 bytes):
5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8.....
03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(...
backtrace:
[<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0
[<000000000187d8bd>] ovs_dp_change+0x63/0xe0
[<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380
[<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150
[<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0
[<00000000fa10e377>] netlink_rcv_skb+0x50/0x100
[<000000004959cece>] genl_rcv+0x24/0x40
[<000000004699ac7f>] netlink_unicast+0x23e/0x360
[<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0
[<000000006f4aa380>] sock_sendmsg+0x62/0x70
[<00000000d0068654>] ____sys_sendmsg+0x230/0x270
[<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0
[<0000000011776020>] __sys_sendmsg+0x59/0xa0
[<000000002e8f2dc1>] do_syscall_64+0x3b/0x90
[<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: b83d23a2a38b ("openvswitch: Introduce per-cpu upcall dispatch")
Acked-by: Aaron Conole <[email protected]>
Signed-off-by: Andrey Zhadchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/datapath.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 7e8a39a356271..6c9d153afbeee 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -1802,7 +1802,7 @@ static int ovs_dp_cmd_new(struct sk_buff *skb, struct genl_info *info)
ovs_dp_reset_user_features(skb, info);
}
- goto err_unlock_and_destroy_meters;
+ goto err_destroy_portids;
}
err = ovs_dp_cmd_fill_info(dp, reply, info->snd_portid,
@@ -1817,6 +1817,8 @@ static int ovs_dp_cmd_new(struct sk_buff *skb, struct genl_info *info)
ovs_notify(&dp_datapath_genl_family, reply, info);
return 0;
+err_destroy_portids:
+ kfree(rcu_dereference_raw(dp->upcall_portids));
err_unlock_and_destroy_meters:
ovs_unlock();
ovs_meters_exit(dp);
--
2.35.1
From: Duoming Zhou <[email protected]>
[ Upstream commit c0955bf957be4bead01fae1d791476260da7325d ]
The function neigh_timer_handler() is a timer handler that runs in an
atomic context. When used by rocker, neigh_timer_handler() calls
"kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in
atomic context bug will happen. One of the processes is shown below:
ofdpa_fib4_add()
...
neigh_add_timer()
(wait a timer)
neigh_timer_handler()
neigh_release()
neigh_destroy()
rocker_port_neigh_destroy()
rocker_world_port_neigh_destroy()
ofdpa_port_neigh_destroy()
ofdpa_port_ipv4_neigh()
kzalloc(sizeof(.., GFP_KERNEL) //may sleep
This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to
GFP_ATOMIC in order to mitigate the bug.
Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Duoming Zhou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/rocker/rocker_ofdpa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c
index bc70c6abd6a5b..58cf7cc54f408 100644
--- a/drivers/net/ethernet/rocker/rocker_ofdpa.c
+++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c
@@ -1273,7 +1273,7 @@ static int ofdpa_port_ipv4_neigh(struct ofdpa_port *ofdpa_port,
bool removing;
int err = 0;
- entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
if (!entry)
return -ENOMEM;
--
2.35.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit 0b4f688d53fdc2a731b9d9cdf0c96255bc024ea6 ]
This reverts commit 90fabae8a2c225c4e4936723c38857887edde5cc.
Patch was applied hastily, revert and let the v2 be reviewed.
Fixes: 90fabae8a2c2 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb")
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_cake.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index a04928082e4ab..a43a58a73d096 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -1713,7 +1713,6 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
}
idx--;
flow = &b->flows[idx];
- ret = NET_XMIT_SUCCESS;
/* ensure shaper state isn't stale */
if (!b->tin_backlog) {
@@ -1772,7 +1771,6 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
qdisc_tree_reduce_backlog(sch, 1-numsegs, len-slen);
consume_skb(skb);
- ret |= __NET_XMIT_STOLEN;
} else {
/* not splitting */
cobalt_set_enqueue_time(skb, now);
@@ -1906,7 +1904,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
}
b->drop_overlimit += dropped;
}
- return ret;
+ return NET_XMIT_SUCCESS;
}
static struct sk_buff *cake_dequeue_one(struct Qdisc *sch)
--
2.35.1
From: Siddh Raman Pant <[email protected]>
commit 15bc8966b6d3a5b9bfe4c9facfa02f2b69b1e5f0 upstream.
When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.
The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.
Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa().
Cc: [email protected]
Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode")
Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6
Reported-by: [email protected]
Signed-off-by: Siddh Raman Pant <[email protected]>
Tested-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/ibss.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -534,6 +534,10 @@ int ieee80211_ibss_finish_csa(struct iee
sdata_assert_lock(sdata);
+ /* When not connected/joined, sending CSA doesn't make sense. */
+ if (ifibss->state != IEEE80211_IBSS_MLME_JOINED)
+ return -ENOLINK;
+
/* update cfg80211 bss information with the new channel */
if (!is_zero_ether_addr(ifibss->bssid)) {
cbss = cfg80211_get_bss(sdata->local->hw.wiphy,
From: Mika Westerberg <[email protected]>
commit eb100b8fa8e8b59eb3e5fc7a5fd4a1e3c5950f64 upstream.
The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.
Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications")
Cc: [email protected]
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thunderbolt/ctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -407,7 +407,7 @@ static void tb_ctl_rx_submit(struct ctl_
static int tb_async_error(const struct ctl_pkg *pkg)
{
- const struct cfg_error_pkg *error = (const struct cfg_error_pkg *)pkg;
+ const struct cfg_error_pkg *error = pkg->buffer;
if (pkg->frame.eof != TB_CFG_PKG_ERROR)
return false;
From: Nathan Chancellor <[email protected]>
[ Upstream commit 6cf07810e9ef8535d60160d13bf0fd05f2af38e7 ]
Clang warns:
arch/powerpc/platforms/pseries/papr_scm.c:492:6: warning: variable 'rc' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:523:64: note: uninitialized use occurs here
dev_info(&p->pdev->dev, "nvdimm pmu didn't register rc=%d\n", rc);
^~
include/linux/dev_printk.h:150:67: note: expanded from macro 'dev_info'
dev_printk_index_wrap(_dev_info, KERN_INFO, dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:492:2: note: remove the 'if' if its condition is always false
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:484:8: note: initialize the variable 'rc' to silence this warning
int rc, nodeid;
^
= 0
1 warning generated.
The call to papr_scm_pmu_check_events() was eliminated but a return code
was not added to the if statement. Add the same return code from
papr_scm_pmu_check_events() for this condition so there is no more
warning.
Fixes: 9b1ac04698a4 ("powerpc/papr_scm: Fix nvdimm event mappings")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1701
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/papr_scm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index 16bac4e0d7a21..92074a6c49d43 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -489,8 +489,10 @@ static void papr_scm_pmu_register(struct papr_scm_priv *p)
goto pmu_err_print;
}
- if (!p->stat_buffer_len)
+ if (!p->stat_buffer_len) {
+ rc = -ENOENT;
goto pmu_check_events_err;
+ }
nd_pmu->pmu.task_ctx_nr = perf_invalid_context;
nd_pmu->pmu.name = nvdimm_name(p->nvdimm);
--
2.35.1
From: Matthew Auld <[email protected]>
[ Upstream commit 8d905254162965c8e6be697d82c7dbf5d08f574d ]
Crucible + recent Mesa seems to sometimes hit:
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER)
And it looks like we can also trigger this with gem_lmem_swapping, if we
modify the test to use slightly larger object sizes.
Looking closer it looks like we have the following issues in
migrate_copy():
- We are using plain integer in various places, which we can easily
overflow with a large object.
- We pass the entire object size (when the src is lmem) into
emit_pte() and then try to copy it, which doesn't work, since we
only have a few fixed sized windows in which to map the pages and
perform the copy. With an object > 8M we therefore aren't properly
copying the pages. And then with an object > 64M we trigger the
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER).
So it looks like our copy handling for any object > 8M (which is our
CHUNK_SZ) is currently broken on DG2.
Fixes: da0595ae91da ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj")
Testcase: igt@gem_lmem_swapping
Signed-off-by: Matthew Auld <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Ramalingam C <[email protected]>
Reviewed-by: Ramalingam C<[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 8676145eb2f53a9940ff70910caf0125bd8a4bc2)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/gt/intel_migrate.c | 44 ++++++++++++-------------
1 file changed, 21 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_migrate.c b/drivers/gpu/drm/i915/gt/intel_migrate.c
index 2b10b96b17b5b..933648cc90ff9 100644
--- a/drivers/gpu/drm/i915/gt/intel_migrate.c
+++ b/drivers/gpu/drm/i915/gt/intel_migrate.c
@@ -638,9 +638,9 @@ static int emit_copy(struct i915_request *rq,
return 0;
}
-static int scatter_list_length(struct scatterlist *sg)
+static u64 scatter_list_length(struct scatterlist *sg)
{
- int len = 0;
+ u64 len = 0;
while (sg && sg_dma_len(sg)) {
len += sg_dma_len(sg);
@@ -650,28 +650,26 @@ static int scatter_list_length(struct scatterlist *sg)
return len;
}
-static void
+static int
calculate_chunk_sz(struct drm_i915_private *i915, bool src_is_lmem,
- int *src_sz, u32 bytes_to_cpy, u32 ccs_bytes_to_cpy)
+ u64 bytes_to_cpy, u64 ccs_bytes_to_cpy)
{
- if (ccs_bytes_to_cpy) {
- if (!src_is_lmem)
- /*
- * When CHUNK_SZ is passed all the pages upto CHUNK_SZ
- * will be taken for the blt. in Flat-ccs supported
- * platform Smem obj will have more pages than required
- * for main meory hence limit it to the required size
- * for main memory
- */
- *src_sz = min_t(int, bytes_to_cpy, CHUNK_SZ);
- } else { /* ccs handling is not required */
- *src_sz = CHUNK_SZ;
- }
+ if (ccs_bytes_to_cpy && !src_is_lmem)
+ /*
+ * When CHUNK_SZ is passed all the pages upto CHUNK_SZ
+ * will be taken for the blt. in Flat-ccs supported
+ * platform Smem obj will have more pages than required
+ * for main meory hence limit it to the required size
+ * for main memory
+ */
+ return min_t(u64, bytes_to_cpy, CHUNK_SZ);
+ else
+ return CHUNK_SZ;
}
-static void get_ccs_sg_sgt(struct sgt_dma *it, u32 bytes_to_cpy)
+static void get_ccs_sg_sgt(struct sgt_dma *it, u64 bytes_to_cpy)
{
- u32 len;
+ u64 len;
do {
GEM_BUG_ON(!it->sg || !sg_dma_len(it->sg));
@@ -702,12 +700,12 @@ intel_context_migrate_copy(struct intel_context *ce,
{
struct sgt_dma it_src = sg_sgt(src), it_dst = sg_sgt(dst), it_ccs;
struct drm_i915_private *i915 = ce->engine->i915;
- u32 ccs_bytes_to_cpy = 0, bytes_to_cpy;
+ u64 ccs_bytes_to_cpy = 0, bytes_to_cpy;
enum i915_cache_level ccs_cache_level;
u32 src_offset, dst_offset;
u8 src_access, dst_access;
struct i915_request *rq;
- int src_sz, dst_sz;
+ u64 src_sz, dst_sz;
bool ccs_is_src, overwrite_ccs;
int err;
@@ -790,8 +788,8 @@ intel_context_migrate_copy(struct intel_context *ce,
if (err)
goto out_rq;
- calculate_chunk_sz(i915, src_is_lmem, &src_sz,
- bytes_to_cpy, ccs_bytes_to_cpy);
+ src_sz = calculate_chunk_sz(i915, src_is_lmem,
+ bytes_to_cpy, ccs_bytes_to_cpy);
len = emit_pte(rq, &it_src, src_cache_level, src_is_lmem,
src_offset, src_sz);
--
2.35.1
From: Matti Vaittinen <[email protected]>
commit 22b4277641c6823ec03d5b1cd82628e5e53e75b7 upstream.
The ad7292 tries to add an devm_action for disabling a regulator at
device detach using devm_add_action_or_reset(). The
devm_add_action_or_reset() does call the release function should adding
action fail. The driver inspects the value returned by
devm_add_action_or_reset() and manually calls regulator_disable() if
adding the action has failed. This leads to double disable and messes
the enable count for regulator.
Do not manually call disable if devm_add_action_or_reset() fails.
Fixes: 506d2e317a0a ("iio: adc: Add driver support for AD7292")
Signed-off-by: Matti Vaittinen <[email protected]>
Tested-by: Marcelo Schmitt <[email protected]>
Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ad7292.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/iio/adc/ad7292.c
+++ b/drivers/iio/adc/ad7292.c
@@ -287,10 +287,8 @@ static int ad7292_probe(struct spi_devic
ret = devm_add_action_or_reset(&spi->dev,
ad7292_regulator_disable, st);
- if (ret) {
- regulator_disable(st->reg);
+ if (ret)
return ret;
- }
ret = regulator_get_voltage(st->reg);
if (ret < 0)
From: Jim Mattson <[email protected]>
[ Upstream commit 0204750bd4c6ccc2fb7417618477f10373b33f56 ]
KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES
bits. When kvm_get_arch_capabilities() was originally written, there
were only a few bits defined in this MSR, and KVM could virtualize all
of them. However, over the years, several bits have been defined that
KVM cannot just blindly pass through to the guest without additional
work (such as virtualizing an MSR promised by the
IA32_ARCH_CAPABILITES feature bit).
Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off
any other bits that are set in the hardware MSR.
Cc: Paolo Bonzini <[email protected]>
Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Vipin Sharma <[email protected]>
Reviewed-by: Xiaoyao Li <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/x86.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index bc411d19dac08..55de0d1981e52 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1570,12 +1570,32 @@ static const u32 msr_based_features_all[] = {
static u32 msr_based_features[ARRAY_SIZE(msr_based_features_all)];
static unsigned int num_msr_based_features;
+/*
+ * Some IA32_ARCH_CAPABILITIES bits have dependencies on MSRs that KVM
+ * does not yet virtualize. These include:
+ * 10 - MISC_PACKAGE_CTRLS
+ * 11 - ENERGY_FILTERING_CTL
+ * 12 - DOITM
+ * 18 - FB_CLEAR_CTRL
+ * 21 - XAPIC_DISABLE_STATUS
+ * 23 - OVERCLOCKING_STATUS
+ */
+
+#define KVM_SUPPORTED_ARCH_CAP \
+ (ARCH_CAP_RDCL_NO | ARCH_CAP_IBRS_ALL | ARCH_CAP_RSBA | \
+ ARCH_CAP_SKIP_VMENTRY_L1DFLUSH | ARCH_CAP_SSB_NO | ARCH_CAP_MDS_NO | \
+ ARCH_CAP_PSCHANGE_MC_NO | ARCH_CAP_TSX_CTRL_MSR | ARCH_CAP_TAA_NO | \
+ ARCH_CAP_SBDR_SSDP_NO | ARCH_CAP_FBSDP_NO | ARCH_CAP_PSDP_NO | \
+ ARCH_CAP_FB_CLEAR | ARCH_CAP_RRSBA | ARCH_CAP_PBRSB_NO)
+
static u64 kvm_get_arch_capabilities(void)
{
u64 data = 0;
- if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES))
+ if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES)) {
rdmsrl(MSR_IA32_ARCH_CAPABILITIES, data);
+ data &= KVM_SUPPORTED_ARCH_CAP;
+ }
/*
* If nx_huge_pages is enabled, KVM's shadow paging will ensure that
@@ -1623,9 +1643,6 @@ static u64 kvm_get_arch_capabilities(void)
*/
}
- /* Guests don't need to know "Fill buffer clear control" exists */
- data &= ~ARCH_CAP_FB_CLEAR_CTRL;
-
return data;
}
--
2.35.1
From: Johan Hovold <[email protected]>
commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.
Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.
Note that updating LCR using the INIT command has no effect on these
devices either.
Reported-by: Jonathan Woithe <[email protected]>
Tested-by: Jonathan Woithe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: [email protected] # 4.10
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ch341.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -97,7 +97,10 @@ struct ch341_private {
u8 mcr;
u8 msr;
u8 lcr;
+
unsigned long quirks;
+ u8 version;
+
unsigned long break_end;
};
@@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct
* (stop bits, parity and word length). Version 0x30 and above use
* CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero.
*/
+ if (priv->version < 0x30)
+ return 0;
+
r = ch341_control_out(dev, CH341_REQ_WRITE_REG,
CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr);
if (r)
@@ -308,7 +314,9 @@ static int ch341_configure(struct usb_de
r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
if (r)
return r;
- dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]);
+
+ priv->version = buffer[0];
+ dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);
r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
if (r < 0)
From: Liu Jian <[email protected]>
[ Upstream commit 583585e48d965338e73e1eb383768d16e0922d73 ]
Fix one kernel NULL pointer dereference as below:
[ 224.462334] Call Trace:
[ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380
[ 224.462441] ? sock_has_perm+0x78/0xa0
[ 224.462463] tcp_bpf_recvmsg+0x12e/0x220
[ 224.462494] inet_recvmsg+0x5b/0xd0
[ 224.462534] __sys_recvfrom+0xc8/0x130
[ 224.462574] ? syscall_trace_enter+0x1df/0x2e0
[ 224.462606] ? __do_page_fault+0x2de/0x500
[ 224.462635] __x64_sys_recvfrom+0x24/0x30
[ 224.462660] do_syscall_64+0x5d/0x1d0
[ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca
In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.
Fixes: 9974d37ea75f ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()")
Signed-off-by: Liu Jian <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/skmsg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index 84209e661171e..69ac686c7cae3 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -462,7 +462,7 @@ int sk_msg_recvmsg(struct sock *sk, struct sk_psock *psock, struct msghdr *msg,
if (copied == len)
break;
- } while (!sg_is_last(sge));
+ } while ((i != msg_rx->sg.end) && !sg_is_last(sge));
if (unlikely(peek)) {
msg_rx = sk_psock_next_msg(psock, msg_rx);
@@ -472,7 +472,7 @@ int sk_msg_recvmsg(struct sock *sk, struct sk_psock *psock, struct msghdr *msg,
}
msg_rx->sg.start = i;
- if (!sge->length && sg_is_last(sge)) {
+ if (!sge->length && (i == msg_rx->sg.end || sg_is_last(sge))) {
msg_rx = sk_psock_dequeue_msg(psock);
kfree_sk_msg(msg_rx);
}
--
2.35.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d776763f48084926b5d9e25507a3ddb7c9243d5e ]
The return type is supposed to be ssize_t, which is signed long,
but "r" was declared as unsigned int. This means that on 64 bit systems
we return positive values instead of negative error codes.
Fixes: 80a3511d70e8 ("cfg80211: add debugfs HT40 allow map")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/debugfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
index aab43469a2f04..0878b162890af 100644
--- a/net/wireless/debugfs.c
+++ b/net/wireless/debugfs.c
@@ -65,9 +65,10 @@ static ssize_t ht40allow_map_read(struct file *file,
{
struct wiphy *wiphy = file->private_data;
char *buf;
- unsigned int offset = 0, buf_size = PAGE_SIZE, i, r;
+ unsigned int offset = 0, buf_size = PAGE_SIZE, i;
enum nl80211_band band;
struct ieee80211_supported_band *sband;
+ ssize_t r;
buf = kzalloc(buf_size, GFP_KERNEL);
if (!buf)
--
2.35.1
From: Stefan Wahren <[email protected]>
[ Upstream commit 13b5cf8d6a0d4a5d289e1ed046cadc63b416db85 ]
Some log messages lacks the final newline. So add them.
Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Stefan Wahren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Florian Fainelli <[email protected]>
Reviewed-by: Ivan T. Ivanov <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-raspberrypi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index e495f5f382ab9..4df921d1e21ca 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -220,7 +220,7 @@ static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_SET_CLOCK_RATE, &_rate);
if (ret)
- dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
+ dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d\n",
clk_hw_get_name(hw), ret);
return ret;
@@ -288,7 +288,7 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,
RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
&min_rate);
if (ret) {
- dev_err(rpi->dev, "Failed to get clock %d min freq: %d",
+ dev_err(rpi->dev, "Failed to get clock %d min freq: %d\n",
id, ret);
return ERR_PTR(ret);
}
@@ -365,7 +365,7 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
struct raspberrypi_clk_variant *variant;
if (clks->id > RPI_FIRMWARE_NUM_CLK_ID) {
- dev_err(rpi->dev, "Unknown clock id: %u", clks->id);
+ dev_err(rpi->dev, "Unknown clock id: %u\n", clks->id);
return -EINVAL;
}
--
2.35.1
From: Nicolas Dichtel <[email protected]>
commit eb55dc09b5dd040232d5de32812cc83001a23da6 upstream.
__mkroute_input() uses fib_validate_source() to trigger an icmp redirect.
My understanding is that fib_validate_source() is used to know if the src
address and the gateway address are on the same link. For that,
fib_validate_source() returns 1 (same link) or 0 (not the same network).
__mkroute_input() is the only user of these positive values, all other
callers only look if the returned value is negative.
Since the below patch, fib_validate_source() didn't return anymore 1 when
both addresses are on the same network, because the route lookup returns
RT_SCOPE_LINK instead of RT_SCOPE_HOST. But this is, in fact, right.
Let's adapat the test to return 1 again when both addresses are on the same
link.
CC: [email protected]
Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop")
Reported-by: kernel test robot <[email protected]>
Reported-by: Heng Qi <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_frontend.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -389,7 +389,7 @@ static int __fib_validate_source(struct
dev_match = dev_match || (res.type == RTN_LOCAL &&
dev == net->loopback_dev);
if (dev_match) {
- ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_HOST;
+ ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_LINK;
return ret;
}
if (no_addr)
@@ -401,7 +401,7 @@ static int __fib_validate_source(struct
ret = 0;
if (fib_lookup(net, &fl4, &res, FIB_LOOKUP_IGNORE_LINKSTATE) == 0) {
if (res.type == RTN_UNICAST)
- ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_HOST;
+ ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_LINK;
}
return ret;
From: Archie Pusaka <[email protected]>
[ Upstream commit f48735a9aaf8258f39918e13adf464ccd7dce33b ]
To prevent multiple conn complete events, we shouldn't look up the
conn with hci_lookup_le_connect, since it requires the state to be
BT_CONNECT. By the time the duplicate event is processed, the state
might have changed, so we end up processing the new event anyway.
Change the lookup function to hci_conn_hash_lookup_ba.
Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Archie Pusaka <[email protected]>
Reviewed-by: Sonny Sasaka <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 67c61f5240596..2c320a8fe70d7 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5568,7 +5568,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
- conn = hci_lookup_le_connect(hdev);
+ conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, bdaddr);
if (!conn) {
/* In case of error status and there is no connection pending
* just unlock as there is nothing to cleanup.
--
2.35.1
From: Cong Wang <[email protected]>
[ Upstream commit 8fc29ff3910f3af08a7c40a75d436b5720efe2bf ]
strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.
And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.
This also makes a lockdep warning reported by syzbot go away.
Reported-and-tested-by: [email protected]
Reported-by: [email protected]
Fixes: e5571240236c ("kcm: Check if sk_user_data already set in kcm_attach")
Fixes: dff8baa26117 ("kcm: Call strp_stop before strp_done in kcm_attach")
Cc: Tom Herbert <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/kcm/kcmsock.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c
index 71899e5a5a111..1215c863e1c41 100644
--- a/net/kcm/kcmsock.c
+++ b/net/kcm/kcmsock.c
@@ -1412,12 +1412,6 @@ static int kcm_attach(struct socket *sock, struct socket *csock,
psock->sk = csk;
psock->bpf_prog = prog;
- err = strp_init(&psock->strp, csk, &cb);
- if (err) {
- kmem_cache_free(kcm_psockp, psock);
- goto out;
- }
-
write_lock_bh(&csk->sk_callback_lock);
/* Check if sk_user_data is already by KCM or someone else.
@@ -1425,13 +1419,18 @@ static int kcm_attach(struct socket *sock, struct socket *csock,
*/
if (csk->sk_user_data) {
write_unlock_bh(&csk->sk_callback_lock);
- strp_stop(&psock->strp);
- strp_done(&psock->strp);
kmem_cache_free(kcm_psockp, psock);
err = -EALREADY;
goto out;
}
+ err = strp_init(&psock->strp, csk, &cb);
+ if (err) {
+ write_unlock_bh(&csk->sk_callback_lock);
+ kmem_cache_free(kcm_psockp, psock);
+ goto out;
+ }
+
psock->save_data_ready = csk->sk_data_ready;
psock->save_write_space = csk->sk_write_space;
psock->save_state_change = csk->sk_state_change;
--
2.35.1
From: Abhinav Kumar <[email protected]>
[ Upstream commit ef3ac3ae147c6ab370875727791e9b3eaf176cea ]
dpu_encoder_helper_phys_cleanup() was not populating neither
wb or intf to the intf_cfg before calling the reset_intf_cfg().
This causes the reset of the active bits of wb/intf to be
skipped which is incorrect.
Fix this by populating the relevant wb or intf indices correctly.
Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks")
Signed-off-by: Abhinav Kumar <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Tested-by: Jessica Zhang <[email protected]> # Trogdor (SC8170)
Patchwork: https://patchwork.freedesktop.org/patch/494298/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 9b4df3084366b..d98c7f7da7c08 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1998,6 +1998,12 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
intf_cfg.stream_sel = 0; /* Don't care value for video mode */
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+
+ if (phys_enc->hw_intf)
+ intf_cfg.intf = phys_enc->hw_intf->idx;
+ if (phys_enc->hw_wb)
+ intf_cfg.wb = phys_enc->hw_wb->idx;
+
if (phys_enc->hw_pp->merge_3d)
intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
--
2.35.1
From: Masahiro Yamada <[email protected]>
commit c7acee3d2f128a38b68fb7af85dbbd91bfd0b4ad upstream.
Christophe Leroy reported that commit 7b4537199a4a ("kbuild: link
symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke
mpc85xx_defconfig + CONFIG_RELOCATABLE=y.
LD vmlinux
SYSMAP System.map
SORTTAB vmlinux
CHKREL vmlinux
WARNING: 451 bad relocations
c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54
c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224
c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4
c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc
c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8
...
The compiler emits a bunch of R_PPC_UADDR32, which is not supported by
arch/powerpc/kernel/reloc_32.S.
The reason is there exists an unaligned symbol.
$ powerpc-linux-gnu-nm -n vmlinux
...
c0b31258 d spe_aligninfo
c0b31298 d __func__.0
c0b312a9 D sys_call_table
c0b319b8 d __func__.0
Commit 7b4537199a4a is not the root cause. Even before that, I can
reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y
+ CONFIG_MODVERSIONS=n.
It is just that nobody noticed because when CONFIG_MODVERSIONS is
enabled, a __crc_* symbol inserted before sys_call_table was hiding the
unalignment issue.
Adding alignment to the syscall table for ppc32 fixes the issue.
Cc: [email protected]
Reported-by: Christophe Leroy <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
[mpe: Trim change log discussion, add Cc stable]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/systbl.S | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -18,6 +18,7 @@
.p2align 3
#define __SYSCALL(nr, entry) .8byte entry
#else
+ .p2align 2
#define __SYSCALL(nr, entry) .long entry
#endif
From: Enzo Matsumiya <[email protected]>
commit 27893dfc1285f80f80f46b3b8c95f5d15d2e66d0 upstream.
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool.
Signed-off-by: Enzo Matsumiya <[email protected]>
Cc: [email protected]
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -964,16 +964,17 @@ SMB2_negotiate(const unsigned int xid,
} else if (rc != 0)
goto neg_exit;
+ rc = -EIO;
if (strcmp(server->vals->version_string,
SMB3ANY_VERSION_STRING) == 0) {
if (rsp->DialectRevision == cpu_to_le16(SMB20_PROT_ID)) {
cifs_server_dbg(VFS,
"SMB2 dialect returned but not requested\n");
- return -EIO;
+ goto neg_exit;
} else if (rsp->DialectRevision == cpu_to_le16(SMB21_PROT_ID)) {
cifs_server_dbg(VFS,
"SMB2.1 dialect returned but not requested\n");
- return -EIO;
+ goto neg_exit;
} else if (rsp->DialectRevision == cpu_to_le16(SMB311_PROT_ID)) {
/* ops set to 3.0 by default for default so update */
server->ops = &smb311_operations;
@@ -984,7 +985,7 @@ SMB2_negotiate(const unsigned int xid,
if (rsp->DialectRevision == cpu_to_le16(SMB20_PROT_ID)) {
cifs_server_dbg(VFS,
"SMB2 dialect returned but not requested\n");
- return -EIO;
+ goto neg_exit;
} else if (rsp->DialectRevision == cpu_to_le16(SMB21_PROT_ID)) {
/* ops set to 3.0 by default for default so update */
server->ops = &smb21_operations;
@@ -998,7 +999,7 @@ SMB2_negotiate(const unsigned int xid,
/* if requested single dialect ensure returned dialect matched */
cifs_server_dbg(VFS, "Invalid 0x%x dialect returned: not requested\n",
le16_to_cpu(rsp->DialectRevision));
- return -EIO;
+ goto neg_exit;
}
cifs_dbg(FYI, "mode 0x%x\n", rsp->SecurityMode);
@@ -1016,9 +1017,10 @@ SMB2_negotiate(const unsigned int xid,
else {
cifs_server_dbg(VFS, "Invalid dialect returned by server 0x%x\n",
le16_to_cpu(rsp->DialectRevision));
- rc = -EIO;
goto neg_exit;
}
+
+ rc = 0;
server->dialect = le16_to_cpu(rsp->DialectRevision);
/*
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 4b592061f7b3971c70e8b72fc42aaead47c24701 ]
In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"),
the commit message mentioned that pm_runtime_put_sync() would be done
at the end of clk_core_unprepare(). This mirrors the operations in
clk_core_prepare() in the opposite order.
However, the actual code that was added wasn't in the order the commit
message described. Move clk_pm_runtime_put() to the end of
clk_core_unprepare() so that it is in the correct order.
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Nícolas F. R. A. Prado <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f00d4c1158d72..f246d66f8261f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -840,10 +840,9 @@ static void clk_core_unprepare(struct clk_core *core)
if (core->ops->unprepare)
core->ops->unprepare(core->hw);
- clk_pm_runtime_put(core);
-
trace_clk_unprepare_complete(core);
clk_core_unprepare(core->parent);
+ clk_pm_runtime_put(core);
}
static void clk_core_unprepare_lock(struct clk_core *core)
--
2.35.1
From: Mika Westerberg <[email protected]>
commit 93a3c0d4e8bfbb15145e5dd7da68a3de4b904aba upstream.
Only Thunderbolt 3 routers need the xHCI connection flow. This also
ensures the router actually has both lane adapters (1 and 3). While
there move declaration of the boolean variables inside the block where
they are being used.
Fixes: 30a4eca69b76 ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices")
Cc: [email protected]
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thunderbolt/switch.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3781,14 +3781,18 @@ int tb_switch_pcie_l1_enable(struct tb_s
*/
int tb_switch_xhci_connect(struct tb_switch *sw)
{
- bool usb_port1, usb_port3, xhci_port1, xhci_port3;
struct tb_port *port1, *port3;
int ret;
+ if (sw->generation != 3)
+ return 0;
+
port1 = &sw->ports[1];
port3 = &sw->ports[3];
if (tb_switch_is_alpine_ridge(sw)) {
+ bool usb_port1, usb_port3, xhci_port1, xhci_port3;
+
usb_port1 = tb_lc_is_usb_plugged(port1);
usb_port3 = tb_lc_is_usb_plugged(port3);
xhci_port1 = tb_lc_is_xhci_connected(port1);
From: Takashi Iwai <[email protected]>
commit 3e7e04b747adea36f349715d9f0998eeebf15d72 upstream.
It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.
This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.
Reported-by: Abhishek Shah <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_clientmgr.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -121,13 +121,13 @@ struct snd_seq_client *snd_seq_client_us
spin_unlock_irqrestore(&clients_lock, flags);
#ifdef CONFIG_MODULES
if (!in_interrupt()) {
- static char client_requested[SNDRV_SEQ_GLOBAL_CLIENTS];
- static char card_requested[SNDRV_CARDS];
+ static DECLARE_BITMAP(client_requested, SNDRV_SEQ_GLOBAL_CLIENTS);
+ static DECLARE_BITMAP(card_requested, SNDRV_CARDS);
+
if (clientid < SNDRV_SEQ_GLOBAL_CLIENTS) {
int idx;
- if (!client_requested[clientid]) {
- client_requested[clientid] = 1;
+ if (!test_and_set_bit(clientid, client_requested)) {
for (idx = 0; idx < 15; idx++) {
if (seq_client_load[idx] < 0)
break;
@@ -142,10 +142,8 @@ struct snd_seq_client *snd_seq_client_us
int card = (clientid - SNDRV_SEQ_GLOBAL_CLIENTS) /
SNDRV_SEQ_CLIENTS_PER_CARD;
if (card < snd_ecards_limit) {
- if (! card_requested[card]) {
- card_requested[card] = 1;
+ if (!test_and_set_bit(card, card_requested))
snd_request_card(card);
- }
snd_seq_device_load_drivers();
}
}
From: Carlos Llamas <[email protected]>
commit a0e44c64b6061dda7e00b7c458e4523e2331b739 upstream.
A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.
The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.
==================================================================
BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590
CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
dump_backtrace.part.0+0x1d0/0x1e0
show_stack+0x18/0x70
dump_stack_lvl+0x68/0x84
print_report+0x2e4/0x61c
kasan_report+0xa4/0x110
kasan_check_range+0xfc/0x1a4
__kasan_check_write+0x3c/0x50
_raw_spin_lock+0xa8/0x150
binder_deferred_func+0x5e0/0x9b0
process_one_work+0x38c/0x5f0
worker_thread+0x9c/0x694
kthread+0x188/0x190
ret_from_fork+0x10/0x20
Acked-by: Christian Brauner (Microsoft) <[email protected]>
Signed-off-by: Carlos Llamas <[email protected]>
Cc: stable <[email protected]> # 4.14+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index c964d7c8c384..6428f6be69e3 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1385,6 +1385,18 @@ static int binder_inc_ref_for_node(struct binder_proc *proc,
}
ret = binder_inc_ref_olocked(ref, strong, target_list);
*rdata = ref->data;
+ if (ret && ref == new_ref) {
+ /*
+ * Cleanup the failed reference here as the target
+ * could now be dead and have already released its
+ * references by now. Calling on the new reference
+ * with strong=0 and a tmp_refs will not decrement
+ * the node. The new_ref gets kfree'd below.
+ */
+ binder_cleanup_ref_olocked(new_ref);
+ ref = NULL;
+ }
+
binder_proc_unlock(proc);
if (new_ref && ref != new_ref)
/*
--
2.37.3
From: Johan Hovold <[email protected]>
commit ceb4038472a4803e7046ed488b03d11551991514 upstream.
Add the device id for Decagon Devices USB Cable Adapter.
Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -130,6 +130,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
From: YiFei Zhu <[email protected]>
[ Upstream commit 14b20b784f59bdd95f6f1cfb112c9818bcec4d84 ]
The verifier cannot perform sufficient validation of any pointers passed
into bpf_attr and treats them as integers rather than pointers. The helper
will then read from arbitrary pointers passed into it. Restrict the helper
to CAP_PERFMON since the security model in BPF of arbitrary kernel read is
CAP_BPF + CAP_PERFMON.
Fixes: af2ac3e13e45 ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Signed-off-by: YiFei Zhu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/syscall.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 82e83cfb4114a..dd0fc2a86ce17 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -5153,7 +5153,7 @@ syscall_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
{
switch (func_id) {
case BPF_FUNC_sys_bpf:
- return &bpf_sys_bpf_proto;
+ return !perfmon_capable() ? NULL : &bpf_sys_bpf_proto;
case BPF_FUNC_btf_find_by_name_kind:
return &bpf_btf_find_by_name_kind_proto;
case BPF_FUNC_sys_close:
--
2.35.1
From: Miquel Raynal <[email protected]>
commit f0da47118c7e93cdbbc6fb403dd729a5f2c90ee3 upstream.
Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
coordinator, as for know we don't have this information we consider we
are not the PAN coordinator.
There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.
Cc: [email protected]
Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac802154/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/mac802154/rx.c
+++ b/net/mac802154/rx.c
@@ -44,7 +44,7 @@ ieee802154_subif_frame(struct ieee802154
switch (mac_cb(skb)->dest.mode) {
case IEEE802154_ADDR_NONE:
- if (mac_cb(skb)->dest.mode != IEEE802154_ADDR_NONE)
+ if (hdr->source.mode != IEEE802154_ADDR_NONE)
/* FIXME: check if we are PAN coordinator */
skb->pkt_type = PACKET_OTHERHOST;
else
From: Dan Carpenter <[email protected]>
commit e230a4455ac3e9b112f0367d1b8e255e141afae0 upstream.
_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer. It
results in a use after free. Delete them.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <[email protected]>
Reported-by: Zheng Wang <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8712/rtl8712_cmd.c | 36 ----------------------------------
1 file changed, 36 deletions(-)
--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -117,34 +117,6 @@ static void r871x_internal_cmd_hdl(struc
kfree(pdrvcmd->pbuf);
}
-static u8 read_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
- void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj *pcmd);
- struct cmd_obj *pcmd = (struct cmd_obj *)pbuf;
-
- /* invoke cmd->callback function */
- pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
- if (!pcmd_callback)
- r8712_free_cmd_obj(pcmd);
- else
- pcmd_callback(padapter, pcmd);
- return H2C_SUCCESS;
-}
-
-static u8 write_macreg_hdl(struct _adapter *padapter, u8 *pbuf)
-{
- void (*pcmd_callback)(struct _adapter *dev, struct cmd_obj *pcmd);
- struct cmd_obj *pcmd = (struct cmd_obj *)pbuf;
-
- /* invoke cmd->callback function */
- pcmd_callback = cmd_callback[pcmd->cmdcode].callback;
- if (!pcmd_callback)
- r8712_free_cmd_obj(pcmd);
- else
- pcmd_callback(padapter, pcmd);
- return H2C_SUCCESS;
-}
-
static u8 read_bbreg_hdl(struct _adapter *padapter, u8 *pbuf)
{
struct cmd_obj *pcmd = (struct cmd_obj *)pbuf;
@@ -213,14 +185,6 @@ static struct cmd_obj *cmd_hdl_filter(st
pcmd_r = NULL;
switch (pcmd->cmdcode) {
- case GEN_CMD_CODE(_Read_MACREG):
- read_macreg_hdl(padapter, (u8 *)pcmd);
- pcmd_r = pcmd;
- break;
- case GEN_CMD_CODE(_Write_MACREG):
- write_macreg_hdl(padapter, (u8 *)pcmd);
- pcmd_r = pcmd;
- break;
case GEN_CMD_CODE(_Read_BBREG):
read_bbreg_hdl(padapter, (u8 *)pcmd);
break;
From: Thierry GUIBERT <[email protected]>
commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream.
Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020
Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0c26 Prolific Technology Inc.
idProduct 0x0020
bcdDevice 0.00
iManufacturer 1 ICOM Inc.
iProduct 2 ICOM Radio
iSerial 3 *obfuscated*
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0030
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Signed-off-by: Thierry GUIBERT <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1810,6 +1810,9 @@ static const struct usb_device_id acm_id
{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
},
+ { USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
{ USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
From: SeongJae Park <[email protected]>
commit 9f5e0fe5d05f7e8de7f39b2b10089834eb0ff787 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.
Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <[email protected]> # 5.10.x
Suggested-by: Juergen Gross <[email protected]>
Signed-off-by: SeongJae Park <[email protected]>
Tested-by: Marek Marczykowski-Górecki <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/xen-blkfront.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -213,6 +213,9 @@ struct blkfront_info
unsigned int feature_fua:1;
unsigned int feature_discard:1;
unsigned int feature_secdiscard:1;
+ /* Connect-time cached feature_persistent parameter */
+ unsigned int feature_persistent_parm:1;
+ /* Persistent grants feature negotiation result */
unsigned int feature_persistent:1;
unsigned int bounce:1;
unsigned int discard_granularity;
@@ -1848,7 +1851,7 @@ again:
goto abort_transaction;
}
err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u",
- info->feature_persistent);
+ info->feature_persistent_parm);
if (err)
dev_warn(&dev->dev,
"writing persistent grants feature to xenbus");
@@ -2281,7 +2284,8 @@ static void blkfront_gather_backend_feat
if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0))
blkfront_setup_discard(info);
- if (feature_persistent)
+ info->feature_persistent_parm = feature_persistent;
+ if (info->feature_persistent_parm)
info->feature_persistent =
!!xenbus_read_unsigned(info->xbdev->otherend,
"feature-persistent", 0);
From: Alan Stern <[email protected]>
commit 608e58a0f4617977178131f5f68a3fce1d3f5316 upstream.
Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:
------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807
The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.
More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines. That's
what this fix does.
Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: [email protected]
Reported-and-tested-by: Rondreis <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/mceusb.c | 35 ++++++++++++++---------------------
1 file changed, 14 insertions(+), 21 deletions(-)
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 0834d5f866fd..39d2b03e2631 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1416,42 +1416,37 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
{
int ret;
struct device *dev = ir->dev;
- char *data;
-
- data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
- if (!data) {
- dev_err(dev, "%s: memory allocation failed!", __func__);
- return;
- }
+ char data[USB_CTRL_MSG_SZ];
/*
* This is a strange one. Windows issues a set address to the device
* on the receive control pipe and expect a certain value pair back
*/
- ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, 3000);
+ ret = usb_control_msg_recv(ir->usbdev, 0, USB_REQ_SET_ADDRESS,
+ USB_DIR_IN | USB_TYPE_VENDOR,
+ 0, 0, data, USB_CTRL_MSG_SZ, 3000,
+ GFP_KERNEL);
dev_dbg(dev, "set address - ret = %d", ret);
dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
data[0], data[1]);
/* set feature: bit rate 38400 bps */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+ 0xc04e, 0x0000, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set feature - ret = %d", ret);
/* bRequest 4: set char length to 8 bits */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 4, USB_TYPE_VENDOR,
+ 0x0808, 0x0000, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set char length - retB = %d", ret);
/* bRequest 2: set handshaking to use DTR/DSR */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, 3000);
+ ret = usb_control_msg_send(ir->usbdev, 0,
+ 2, USB_TYPE_VENDOR,
+ 0x0000, 0x0100, NULL, 0, 3000, GFP_KERNEL);
dev_dbg(dev, "set handshake - retC = %d", ret);
/* device resume */
@@ -1459,8 +1454,6 @@ static void mceusb_gen1_init(struct mceusb_dev *ir)
/* get hw/sw revision? */
mce_command_out(ir, GET_REVISION, sizeof(GET_REVISION));
-
- kfree(data);
}
static void mceusb_gen2_init(struct mceusb_dev *ir)
--
2.37.3
From: Takashi Iwai <[email protected]>
commit 5f73aa2cf8bef4a39baa1591c3144ede4788826e upstream.
The recent commit 87d0e2f41b8c ("usb: typec: ucsi: add a common
function ucsi_unregister_connectors()") introduced a regression that
caused NULL dereference at reading the power supply sysfs. It's a
stale sysfs entry that should have been removed but remains with NULL
ops. The commit changed the error handling to skip the entries after
a NULL con->wq, and this leaves the power device unreleased.
For addressing the regression, the straight revert is applied here.
Further code improvements can be done from the scratch again.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1202386
Link: https://lore.kernel.org/r/[email protected]
Fixes: 87d0e2f41b8c ("usb: typec: ucsi: add a common function ucsi_unregister_connectors()")
Cc: <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/ucsi/ucsi.c | 53 +++++++++++++++++++-----------------------
1 file changed, 24 insertions(+), 29 deletions(-)
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1200,32 +1200,6 @@ out_unlock:
return ret;
}
-static void ucsi_unregister_connectors(struct ucsi *ucsi)
-{
- struct ucsi_connector *con;
- int i;
-
- if (!ucsi->connector)
- return;
-
- for (i = 0; i < ucsi->cap.num_connectors; i++) {
- con = &ucsi->connector[i];
-
- if (!con->wq)
- break;
-
- cancel_work_sync(&con->work);
- ucsi_unregister_partner(con);
- ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
- ucsi_unregister_port_psy(con);
- destroy_workqueue(con->wq);
- typec_unregister_port(con->port);
- }
-
- kfree(ucsi->connector);
- ucsi->connector = NULL;
-}
-
/**
* ucsi_init - Initialize UCSI interface
* @ucsi: UCSI to be initialized
@@ -1234,6 +1208,7 @@ static void ucsi_unregister_connectors(s
*/
static int ucsi_init(struct ucsi *ucsi)
{
+ struct ucsi_connector *con;
u64 command;
int ret;
int i;
@@ -1264,7 +1239,7 @@ static int ucsi_init(struct ucsi *ucsi)
}
/* Allocate the connectors. Released in ucsi_unregister() */
- ucsi->connector = kcalloc(ucsi->cap.num_connectors,
+ ucsi->connector = kcalloc(ucsi->cap.num_connectors + 1,
sizeof(*ucsi->connector), GFP_KERNEL);
if (!ucsi->connector) {
ret = -ENOMEM;
@@ -1288,7 +1263,15 @@ static int ucsi_init(struct ucsi *ucsi)
return 0;
err_unregister:
- ucsi_unregister_connectors(ucsi);
+ for (con = ucsi->connector; con->port; con++) {
+ ucsi_unregister_partner(con);
+ ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
+ ucsi_unregister_port_psy(con);
+ if (con->wq)
+ destroy_workqueue(con->wq);
+ typec_unregister_port(con->port);
+ con->port = NULL;
+ }
err_reset:
memset(&ucsi->cap, 0, sizeof(ucsi->cap));
@@ -1402,6 +1385,7 @@ EXPORT_SYMBOL_GPL(ucsi_register);
void ucsi_unregister(struct ucsi *ucsi)
{
u64 cmd = UCSI_SET_NOTIFICATION_ENABLE;
+ int i;
/* Make sure that we are not in the middle of driver initialization */
cancel_delayed_work_sync(&ucsi->work);
@@ -1409,7 +1393,18 @@ void ucsi_unregister(struct ucsi *ucsi)
/* Disable notifications */
ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));
- ucsi_unregister_connectors(ucsi);
+ for (i = 0; i < ucsi->cap.num_connectors; i++) {
+ cancel_work_sync(&ucsi->connector[i].work);
+ ucsi_unregister_partner(&ucsi->connector[i]);
+ ucsi_unregister_altmodes(&ucsi->connector[i],
+ UCSI_RECIPIENT_CON);
+ ucsi_unregister_port_psy(&ucsi->connector[i]);
+ if (ucsi->connector[i].wq)
+ destroy_workqueue(ucsi->connector[i].wq);
+ typec_unregister_port(ucsi->connector[i].port);
+ }
+
+ kfree(ucsi->connector);
}
EXPORT_SYMBOL_GPL(ucsi_unregister);
From: Sun Ke <[email protected]>
[ Upstream commit c93ccd63b18c8d108c57b2bb0e5f3b058b9d2029 ]
The cache_size field of copen is specified by the user daemon.
If cache_size < 0, then the OPEN request is expected to fail,
while copen itself shall succeed. However, returning 0 is indeed
unexpected when cache_size is an invalid error code.
Fix this by returning error when cache_size is an invalid error code.
Changes
=======
v4: update the code suggested by Dan
v3: update the commit log suggested by Jingbo.
Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Sun Ke <[email protected]>
Suggested-by: Jeffle Xu <[email protected]>
Suggested-by: Dan Carpenter <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Jingbo Xu <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/ # v2
Link: https://lore.kernel.org/r/[email protected]/ # v3
Link: https://lore.kernel.org/r/[email protected]/ # v4
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/ondemand.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/fs/cachefiles/ondemand.c b/fs/cachefiles/ondemand.c
index 1fee702d55293..7e1586bd5cf34 100644
--- a/fs/cachefiles/ondemand.c
+++ b/fs/cachefiles/ondemand.c
@@ -158,9 +158,13 @@ int cachefiles_ondemand_copen(struct cachefiles_cache *cache, char *args)
/* fail OPEN request if daemon reports an error */
if (size < 0) {
- if (!IS_ERR_VALUE(size))
- size = -EINVAL;
- req->error = size;
+ if (!IS_ERR_VALUE(size)) {
+ req->error = -EINVAL;
+ ret = -EINVAL;
+ } else {
+ req->error = size;
+ ret = 0;
+ }
goto out;
}
--
2.35.1
From: Mazin Al Haddad <[email protected]>
commit f16c6d2e58a4c2b972efcf9eb12390ee0ba3befb upstream.
A null pointer dereference can happen when attempting to access the
"gsm->receive()" function in gsmld_receive_buf(). Currently, the code
assumes that gsm->recieve is only called after MUX activation.
Since the gsmld_receive_buf() function can be accessed without the need to
initialize the MUX, the gsm->receive() function will not be set and a
NULL pointer dereference will occur.
Fix this by avoiding the call to "gsm->receive()" in case the function is
not initialized by adding a sanity check.
Call Trace:
<TASK>
gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861
tiocsti drivers/tty/tty_io.c:2293 [inline]
tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://syzkaller.appspot.com/bug?id=bdf035c61447f8c6e0e6920315d577cb5cc35ac5
Fixes: 01aecd917114 ("tty: n_gsm: fix tty registration before control channel open")
Cc: stable <[email protected]>
Reported-and-tested-by: [email protected]
Signed-off-by: Mazin Al Haddad <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/n_gsm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2858,7 +2858,8 @@ static void gsmld_receive_buf(struct tty
flags = *fp++;
switch (flags) {
case TTY_NORMAL:
- gsm->receive(gsm, *cp);
+ if (gsm->receive)
+ gsm->receive(gsm, *cp);
break;
case TTY_OVERRUN:
case TTY_BREAK:
From: Heiner Kallweit <[email protected]>
commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream.
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().
Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: [email protected]
Acked-by: Minas Harutyunyan <[email protected]>
Acked-by: Marek Szyprowski <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/platform.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -154,9 +154,9 @@ static int __dwc2_lowlevel_hw_enable(str
} else if (hsotg->plat && hsotg->plat->phy_init) {
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
} else {
- ret = phy_power_on(hsotg->phy);
+ ret = phy_init(hsotg->phy);
if (ret == 0)
- ret = phy_init(hsotg->phy);
+ ret = phy_power_on(hsotg->phy);
}
return ret;
@@ -188,9 +188,9 @@ static int __dwc2_lowlevel_hw_disable(st
} else if (hsotg->plat && hsotg->plat->phy_exit) {
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
} else {
- ret = phy_exit(hsotg->phy);
+ ret = phy_power_off(hsotg->phy);
if (ret == 0)
- ret = phy_power_off(hsotg->phy);
+ ret = phy_exit(hsotg->phy);
}
if (ret)
return ret;
From: Yacan Liu <[email protected]>
[ Upstream commit a8424a9b4522a3ab9f32175ad6d848739079071f ]
For passive connections, the refcount increment has been done in
smc_clcsock_accept()-->smc_sock_alloc().
Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: Yacan Liu <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 433bb5a7df31e..a51d5ed2ad764 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1812,7 +1812,6 @@ static void smc_listen_out_connected(struct smc_sock *new_smc)
{
struct sock *newsmcsk = &new_smc->sk;
- sk_refcnt_debug_inc(newsmcsk);
if (newsmcsk->sk_state == SMC_INIT)
newsmcsk->sk_state = SMC_ACTIVE;
--
2.35.1
From: Ville Syrjälä <[email protected]>
commit 0211c2a0ea600e25db3044daaeff4fe41c3ed6d9 upstream.
The stuff programmed into the wm/ddb registers of planes
on disabled pipes doesn't matter. So during readout just
leave our software state tracking for those zeroed.
This should avoid us trying too hard to clean up after
whatever mess the VBIOS/GOP left in there. The actual
hardware state will get cleaned up if/when we enable
the pipe anyway.
Cc: [email protected]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5711
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Stanislav Lisovskiy <[email protected]>
(cherry picked from commit b183db8f4783ca2efc9b47734f15aad9477a108a)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_pm.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6560,7 +6560,10 @@ void skl_wm_get_hw_state(struct drm_i915
enum plane_id plane_id;
u8 slices;
- skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal);
+ memset(&crtc_state->wm.skl.optimal, 0,
+ sizeof(crtc_state->wm.skl.optimal));
+ if (crtc_state->hw.active)
+ skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal);
crtc_state->wm.skl.raw = crtc_state->wm.skl.optimal;
memset(&dbuf_state->ddb[pipe], 0, sizeof(dbuf_state->ddb[pipe]));
@@ -6571,6 +6574,9 @@ void skl_wm_get_hw_state(struct drm_i915
struct skl_ddb_entry *ddb_y =
&crtc_state->wm.skl.plane_ddb_y[plane_id];
+ if (!crtc_state->hw.active)
+ continue;
+
skl_ddb_get_hw_plane_state(dev_priv, crtc->pipe,
plane_id, ddb, ddb_y);
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 0947ae1121083d363d522ff7518ee72b55bd8d29 ]
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing.
Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index fb6bd57228a84..cf44ff50b1f23 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1005,7 +1005,7 @@ pure_initcall(bpf_jit_charge_init);
int bpf_jit_charge_modmem(u32 size)
{
- if (atomic_long_add_return(size, &bpf_jit_current) > bpf_jit_limit) {
+ if (atomic_long_add_return(size, &bpf_jit_current) > READ_ONCE(bpf_jit_limit)) {
if (!bpf_capable()) {
atomic_long_sub(size, &bpf_jit_current);
return -EPERM;
--
2.35.1
From: Zhengchao Shao <[email protected]>
[ Upstream commit b05972f01e7d30419987a1f221b5593668fd6448 ]
The issue is the same to commit c2999f7fb05b ("net: sched: multiq: don't
call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while
holding sch tree spinlock, which results sleeping-while-atomic BUG.
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_tbf.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c
index 72102277449e1..36079fdde2cb5 100644
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -356,6 +356,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt,
struct nlattr *tb[TCA_TBF_MAX + 1];
struct tc_tbf_qopt *qopt;
struct Qdisc *child = NULL;
+ struct Qdisc *old = NULL;
struct psched_ratecfg rate;
struct psched_ratecfg peak;
u64 max_size;
@@ -447,7 +448,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt,
sch_tree_lock(sch);
if (child) {
qdisc_tree_flush_backlog(q->qdisc);
- qdisc_put(q->qdisc);
+ old = q->qdisc;
q->qdisc = child;
}
q->limit = qopt->limit;
@@ -467,6 +468,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt,
memcpy(&q->peak, &peak, sizeof(struct psched_ratecfg));
sch_tree_unlock(sch);
+ qdisc_put(old);
err = 0;
tbf_offload_change(sch);
--
2.35.1
From: Utkarsh Patel <[email protected]>
commit 1b1b672cc1d4fb3065dac79efb8901bd6244ef69 upstream.
This adds the necessary ACPI ID for Intel Meteor Lake
IOM devices.
The callback function is_memory() is modified so that it
also checks if the resource descriptor passed to it is a
memory type "Address Space Resource Descriptor".
On Intel Meteor Lake the ACPI memory resource is not
described using the "32-bit Memory Range Descriptor" because
the memory is outside of the 32-bit address space. The
memory resource is described using the "Address Space
Resource Descriptor" instead.
Intel Meteor Lake is the first platform to describe the
memory resource for this device with Address Space Resource
Descriptor, but it most likely will not be the last.
Therefore the change to the is_memory() callback function
is made generic.
Signed-off-by: Utkarsh Patel <[email protected]>
Cc: [email protected]
[ heikki: Rewrote the commit message. ]
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -571,9 +571,11 @@ err_unregister_switch:
static int is_memory(struct acpi_resource *res, void *data)
{
- struct resource r;
+ struct resource_win win = {};
+ struct resource *r = &win.res;
- return !acpi_dev_resource_memory(res, &r);
+ return !(acpi_dev_resource_memory(res, r) ||
+ acpi_dev_resource_address_space(res, &win));
}
/* IOM ACPI IDs and IOM_PORT_STATUS_OFFSET */
@@ -583,6 +585,9 @@ static const struct acpi_device_id iom_a
/* AlderLake */
{ "INTC1079", 0x160, },
+
+ /* Meteor Lake */
+ { "INTC107A", 0x160, },
{}
};
From: Stefan Wahren <[email protected]>
[ Upstream commit 35f73cca1cecda0c1f8bb7d8be4ce5cd2d46ae8c ]
The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate
hook) can fail to get the clock rate from the firmware. In this case
we cannot return a signed error value, which would be casted to
unsigned long. Fix this by returning 0 instead.
Signed-off-by: Stefan Wahren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4e85e535e6cc ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware")
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-raspberrypi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 73518009a0f20..39d63c983d62c 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -203,7 +203,7 @@ static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
ret = raspberrypi_clock_property(rpi->firmware, data,
RPI_FIRMWARE_GET_CLOCK_RATE, &val);
if (ret)
- return ret;
+ return 0;
return val;
}
--
2.35.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 4ef3f2aff1267bfa6d5a90c42a30b927b8aa239b ]
This patch updates device status array range from 11 to 12 as we will
be reading status from device number 0 to device number 11 inclusive.
Without this patch we can potentially access status array out of range
during auto-enumeration.
Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soundwire/qcom.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index b5ec7726592c8..71d2931cb885c 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -167,7 +167,7 @@ struct qcom_swrm_ctrl {
u8 wcmd_id;
struct qcom_swrm_port_config pconfig[QCOM_SDW_MAX_PORTS];
struct sdw_stream_runtime *sruntime[SWRM_MAX_DAIS];
- enum sdw_slave_status status[SDW_MAX_DEVICES];
+ enum sdw_slave_status status[SDW_MAX_DEVICES + 1];
int (*reg_read)(struct qcom_swrm_ctrl *ctrl, int reg, u32 *val);
int (*reg_write)(struct qcom_swrm_ctrl *ctrl, int reg, int val);
u32 slave_status;
@@ -411,7 +411,7 @@ static int qcom_swrm_get_alert_slave_dev_num(struct qcom_swrm_ctrl *ctrl)
ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val);
- for (dev_num = 0; dev_num < SDW_MAX_DEVICES; dev_num++) {
+ for (dev_num = 0; dev_num <= SDW_MAX_DEVICES; dev_num++) {
status = (val >> (dev_num * SWRM_MCP_SLV_STATUS_SZ));
if ((status & SWRM_MCP_SLV_STATUS_MASK) == SDW_SLAVE_ALERT) {
@@ -431,7 +431,7 @@ static void qcom_swrm_get_device_status(struct qcom_swrm_ctrl *ctrl)
ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val);
ctrl->slave_status = val;
- for (i = 0; i < SDW_MAX_DEVICES; i++) {
+ for (i = 0; i <= SDW_MAX_DEVICES; i++) {
u32 s;
s = (val >> (i * 2));
--
2.35.1
From: Conor Dooley <[email protected]>
[ Upstream commit 3e5e56c60a14776e2a49837b55b03bc193fd91f7 ]
Sparse complains about missing statics in the declarations of several
variables:
arch/riscv/kvm/vcpu_sbi_replace.c:38:37: warning: symbol 'vcpu_sbi_ext_time' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:73:37: warning: symbol 'vcpu_sbi_ext_ipi' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:126:37: warning: symbol 'vcpu_sbi_ext_rfence' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:170:37: warning: symbol 'vcpu_sbi_ext_srst' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:69:37: warning: symbol 'vcpu_sbi_ext_base' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:90:37: warning: symbol 'vcpu_sbi_ext_experimental' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:96:37: warning: symbol 'vcpu_sbi_ext_vendor' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_hsm.c:115:37: warning: symbol 'vcpu_sbi_ext_hsm' was not declared. Should it be static?
These variables are however used in vcpu_sbi.c where they are declared
as extern. Move them to kvm_vcpu_sbi.h which is handily already
included by the three other files.
Fixes: a046c2d8578c ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file")
Fixes: 5f862df5585c ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Fixes: 3e1d86569c21 ("RISC-V: KVM: Add SBI HSM extension in KVM")
Reviewed-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/include/asm/kvm_vcpu_sbi.h | 12 ++++++++++++
arch/riscv/kvm/vcpu_sbi.c | 12 +-----------
2 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/arch/riscv/include/asm/kvm_vcpu_sbi.h b/arch/riscv/include/asm/kvm_vcpu_sbi.h
index 83d6d4d2b1dff..26a446a34057b 100644
--- a/arch/riscv/include/asm/kvm_vcpu_sbi.h
+++ b/arch/riscv/include/asm/kvm_vcpu_sbi.h
@@ -33,4 +33,16 @@ void kvm_riscv_vcpu_sbi_system_reset(struct kvm_vcpu *vcpu,
u32 type, u64 flags);
const struct kvm_vcpu_sbi_extension *kvm_vcpu_sbi_find_ext(unsigned long extid);
+#ifdef CONFIG_RISCV_SBI_V01
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_v01;
+#endif
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_base;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_time;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_ipi;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_srst;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_hsm;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_experimental;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_vendor;
+
#endif /* __RISCV_KVM_VCPU_SBI_H__ */
diff --git a/arch/riscv/kvm/vcpu_sbi.c b/arch/riscv/kvm/vcpu_sbi.c
index d45e7da3f0d32..f96991d230bfc 100644
--- a/arch/riscv/kvm/vcpu_sbi.c
+++ b/arch/riscv/kvm/vcpu_sbi.c
@@ -32,23 +32,13 @@ static int kvm_linux_err_map_sbi(int err)
};
}
-#ifdef CONFIG_RISCV_SBI_V01
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_v01;
-#else
+#ifndef CONFIG_RISCV_SBI_V01
static const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_v01 = {
.extid_start = -1UL,
.extid_end = -1UL,
.handler = NULL,
};
#endif
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_base;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_time;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_ipi;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_srst;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_hsm;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_experimental;
-extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_vendor;
static const struct kvm_vcpu_sbi_extension *sbi_ext[] = {
&vcpu_sbi_ext_v01,
--
2.35.1
From: Pawel Laszczak <[email protected]>
commit b46a6b09fa056042a302b181a1941f0056944603 upstream.
ISO OUT endpoint is enabled during queuing first usb request
in transfer ring and disabled when TRBERR is reported by controller.
After TRBERR and before next transfer added to TR driver must again
reenable endpoint but does not.
To solve this issue during processing TRBERR event driver must
set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Pawel Laszczak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/cdns3/cdns3-gadget.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -1690,6 +1690,7 @@ static int cdns3_check_ep_interrupt_proc
ep_cfg &= ~EP_CFG_ENABLE;
writel(ep_cfg, &priv_dev->regs->ep_cfg);
priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN;
+ priv_ep->flags |= EP_UPDATE_EP_TRBADDR;
}
cdns3_transfer_completed(priv_dev, priv_ep);
} else if (!(priv_ep->flags & EP_STALLED) &&
From: Yonglin Tan <[email protected]>
commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream.
Add usb product id entry for the Quectel EM060K module.
"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030b Rev= 5.04
S: Manufacturer=Quectel
S: Product=EM060K-GL
S: SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Yonglin Tan <[email protected]>
[ johan: mention QDSS port and sort entries ]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -253,6 +253,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM05G 0x030a
+#define QUECTEL_PRODUCT_EM060K 0x030b
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
@@ -1142,6 +1143,9 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
From: Isaac J. Manjarres <[email protected]>
commit 25e9fbf0fd38868a429feabc38abebfc6dbf6542 upstream.
Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.
If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.
If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.
Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: [email protected]
Cc: Saravana Kannan <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Saravana Kannan <[email protected]>
Signed-off-by: Isaac J. Manjarres <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/dd.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -897,6 +897,11 @@ static int __device_attach_driver(struct
dev_dbg(dev, "Device match requests probe deferral\n");
dev->can_match = true;
driver_deferred_probe_add(dev);
+ /*
+ * Device can't match with a driver right now, so don't attempt
+ * to match or bind with other drivers on the bus.
+ */
+ return ret;
} else if (ret < 0) {
dev_dbg(dev, "Bus failed to match device: %d\n", ret);
return ret;
@@ -1136,6 +1141,11 @@ static int __driver_attach(struct device
dev_dbg(dev, "Device match requests probe deferral\n");
dev->can_match = true;
driver_deferred_probe_add(dev);
+ /*
+ * Driver could not match with device, but may match with
+ * another device on the bus.
+ */
+ return 0;
} else if (ret < 0) {
dev_dbg(dev, "Bus failed to match device: %d\n", ret);
return ret;
From: Colin Ian King <[email protected]>
[ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ]
There is a spelling mistake in a gvt_vgpu_err error message. Fix it.
Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Zhi Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index beea5895e4992..73e74a6a76037 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -905,7 +905,7 @@ static int update_fdi_rx_iir_status(struct intel_vgpu *vgpu,
else if (FDI_RX_IMR_TO_PIPE(offset) != INVALID_INDEX)
index = FDI_RX_IMR_TO_PIPE(offset);
else {
- gvt_vgpu_err("Unsupport registers %x\n", offset);
+ gvt_vgpu_err("Unsupported registers %x\n", offset);
return -EINVAL;
}
--
2.35.1
From: Kacper Michajłow <[email protected]>
commit a2d57ebec1e15f0ac256eb8397e82b07adfaaacc upstream.
Magic initialization sequence was extracted from Windows driver and
cleaned up manually.
Fixes internal speakers output.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1851518
Signed-off-by: Kacper Michajłow <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 63 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 56 insertions(+), 7 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4689,6 +4689,48 @@ static void alc236_fixup_hp_mute_led_mic
alc236_fixup_hp_micmute_led_vref(codec, fix, action);
}
+static inline void alc298_samsung_write_coef_pack(struct hda_codec *codec,
+ const unsigned short coefs[2])
+{
+ alc_write_coef_idx(codec, 0x23, coefs[0]);
+ alc_write_coef_idx(codec, 0x25, coefs[1]);
+ alc_write_coef_idx(codec, 0x26, 0xb011);
+}
+
+struct alc298_samsung_amp_desc {
+ unsigned char nid;
+ unsigned short init_seq[2][2];
+};
+
+static void alc298_fixup_samsung_amp(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ int i, j;
+ static const unsigned short init_seq[][2] = {
+ { 0x19, 0x00 }, { 0x20, 0xc0 }, { 0x22, 0x44 }, { 0x23, 0x08 },
+ { 0x24, 0x85 }, { 0x25, 0x41 }, { 0x35, 0x40 }, { 0x36, 0x01 },
+ { 0x38, 0x81 }, { 0x3a, 0x03 }, { 0x3b, 0x81 }, { 0x40, 0x3e },
+ { 0x41, 0x07 }, { 0x400, 0x1 }
+ };
+ static const struct alc298_samsung_amp_desc amps[] = {
+ { 0x3a, { { 0x18, 0x1 }, { 0x26, 0x0 } } },
+ { 0x39, { { 0x18, 0x2 }, { 0x26, 0x1 } } }
+ };
+
+ if (action != HDA_FIXUP_ACT_INIT)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(amps); i++) {
+ alc_write_coef_idx(codec, 0x22, amps[i].nid);
+
+ for (j = 0; j < ARRAY_SIZE(amps[i].init_seq); j++)
+ alc298_samsung_write_coef_pack(codec, amps[i].init_seq[j]);
+
+ for (j = 0; j < ARRAY_SIZE(init_seq); j++)
+ alc298_samsung_write_coef_pack(codec, init_seq[j]);
+ }
+}
+
#if IS_REACHABLE(CONFIG_INPUT)
static void gpio2_mic_hotkey_event(struct hda_codec *codec,
struct hda_jack_callback *event)
@@ -7000,6 +7042,7 @@ enum {
ALC236_FIXUP_HP_GPIO_LED,
ALC236_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
+ ALC298_FIXUP_SAMSUNG_AMP,
ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
@@ -8365,6 +8408,12 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc236_fixup_hp_mute_led_micmute_vref,
},
+ [ALC298_FIXUP_SAMSUNG_AMP] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc298_fixup_samsung_amp,
+ .chained = true,
+ .chain_id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET
+ },
[ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = {
.type = HDA_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
@@ -9307,13 +9356,13 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x10ec, 0x1254, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE),
SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),
- SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
- SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
- SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
- SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_AMP),
+ SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_AMP),
+ SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_AMP),
+ SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_AMP),
SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
- SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
- SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_AMP),
+ SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_AMP),
SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
@@ -9679,7 +9728,7 @@ static const struct hda_model_fixup alc2
{.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"},
{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
- {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
+ {.id = ALC298_FIXUP_SAMSUNG_AMP, .name = "alc298-samsung-amp"},
{.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"},
{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
From: Kuogee Hsieh <[email protected]>
[ Upstream commit deffa2d75db7e7a9a1fe3dad4f99310bff7b6449 ]
Some userspace presumes that the first connected connector is the main
display, where it's supposed to display e.g. the login screen. For
laptops, this should be the main panel.
This patch call drm_helper_move_panel_connectors_to_head() after
drm_bridge_connector_init() to make sure eDP stay at head of
connected connector list. This fixes unexpected corruption happen
at eDP panel if eDP is not placed at head of connected connector
list.
Changes in v2:
-- move drm_helper_move_panel_connectors_to_head() to
dpu_kms_drm_obj_init()
Changes in v4:
-- move drm_helper_move_panel_connectors_to_head() to msm_drm_init()
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Tested-by: Douglas Anderson <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Fixes: ef7837ff091c ("drm/msm/dp: Add DP controllers for sc7280")
Patchwork: https://patchwork.freedesktop.org/patch/492581/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 14ab9a627d8b0..7c0314d6566af 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -424,6 +424,8 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv)
}
}
+ drm_helper_move_panel_connectors_to_head(ddev);
+
ddev->mode_config.funcs = &mode_config_funcs;
ddev->mode_config.helper_private = &mode_config_helper_funcs;
--
2.35.1
From: Gerald Schaefer <[email protected]>
commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream.
The alignment check in prepare_hugepage_range() is wrong for 2 GB
hugepages, it only checks for 1 MB hugepage alignment.
This can result in kernel crash in __unmap_hugepage_range() at the
BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings
created with MAP_FIXED at unaligned address.
Fix this by correctly handling multiple hugepage sizes, similar to the
generic version of prepare_hugepage_range().
Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages")
Cc: <[email protected]> # 4.8+
Acked-by: Alexander Gordeev <[email protected]>
Signed-off-by: Gerald Schaefer <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/hugetlb.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -28,9 +28,11 @@ pte_t huge_ptep_get_and_clear(struct mm_
static inline int prepare_hugepage_range(struct file *file,
unsigned long addr, unsigned long len)
{
- if (len & ~HPAGE_MASK)
+ struct hstate *h = hstate_file(file);
+
+ if (len & ~huge_page_mask(h))
return -EINVAL;
- if (addr & ~HPAGE_MASK)
+ if (addr & ~huge_page_mask(h))
return -EINVAL;
return 0;
}
From: Marcus Folkesson <[email protected]>
commit cfbd76d5c9c449739bb74288d982bccf9ff822f4 upstream.
Go for the right property name that is documented in the bindings.
Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/mcp3911.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -210,7 +210,14 @@ static int mcp3911_config(struct mcp3911
u32 configreg;
int ret;
- device_property_read_u32(dev, "device-addr", &adc->dev_addr);
+ ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
+
+ /*
+ * Fallback to "device-addr" due to historical mismatch between
+ * dt-bindings and implementation
+ */
+ if (ret)
+ device_property_read_u32(dev, "device-addr", &adc->dev_addr);
if (adc->dev_addr > 3) {
dev_err(&adc->spi->dev,
"invalid device address (%i). Must be in range 0-3.\n",
From: Wang Hai <[email protected]>
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_generic.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index a64c3c1541118..b3596d4bd14a2 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1125,6 +1125,21 @@ struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
}
EXPORT_SYMBOL(dev_graft_qdisc);
+static void shutdown_scheduler_queue(struct net_device *dev,
+ struct netdev_queue *dev_queue,
+ void *_qdisc_default)
+{
+ struct Qdisc *qdisc = dev_queue->qdisc_sleeping;
+ struct Qdisc *qdisc_default = _qdisc_default;
+
+ if (qdisc) {
+ rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
+ dev_queue->qdisc_sleeping = qdisc_default;
+
+ qdisc_put(qdisc);
+ }
+}
+
static void attach_one_default_qdisc(struct net_device *dev,
struct netdev_queue *dev_queue,
void *_unused)
@@ -1172,6 +1187,7 @@ static void attach_default_qdiscs(struct net_device *dev)
if (qdisc == &noop_qdisc) {
netdev_warn(dev, "default qdisc (%s) fail, fallback to %s\n",
default_qdisc_ops->id, noqueue_qdisc_ops.id);
+ netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
dev->priv_flags |= IFF_NO_QUEUE;
netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL);
qdisc = txq->qdisc_sleeping;
@@ -1450,21 +1466,6 @@ void dev_init_scheduler(struct net_device *dev)
timer_setup(&dev->watchdog_timer, dev_watchdog, 0);
}
-static void shutdown_scheduler_queue(struct net_device *dev,
- struct netdev_queue *dev_queue,
- void *_qdisc_default)
-{
- struct Qdisc *qdisc = dev_queue->qdisc_sleeping;
- struct Qdisc *qdisc_default = _qdisc_default;
-
- if (qdisc) {
- rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
- dev_queue->qdisc_sleeping = qdisc_default;
-
- qdisc_put(qdisc);
- }
-}
-
void dev_shutdown(struct net_device *dev)
{
netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
--
2.35.1
From: Tony Lindgren <[email protected]>
[ Upstream commit 26f2da0d2f823dc7180b0505d46318f64d1e0a7a ]
For ti_find_clock_provider() we want to return the np with refcount
incremented. However we are missing of_node_get() for the
clock-output-names case that causes refcount warnings.
Fixes: 51f661ef9a10 ("clk: ti: Add ti_find_clock_provider() to use clock-output-names")
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/ti/clk.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 3463579220b51..121d8610beb15 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -143,6 +143,7 @@ static struct device_node *ti_find_clock_provider(struct device_node *from,
continue;
if (!strncmp(n, tmp, strlen(tmp))) {
+ of_node_get(np);
found = true;
break;
}
--
2.35.1
From: Vadim Pasternak <[email protected]>
[ Upstream commit 17c2bd6bea4c32fe691c1f9ebcc20fd48d77454a ]
Fix smatch warning:
drivers/platform/mellanox/mlxreg-lc.c:866 mlxreg_lc_probe() warn: passing zero to 'PTR_ERR'
by removing 'err = PTR_ERR(regmap)'.
Fixes: b4b830a34d80 ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Vadim Pasternak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/mellanox/mlxreg-lc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/platform/mellanox/mlxreg-lc.c b/drivers/platform/mellanox/mlxreg-lc.c
index 55834ccb4ac7c..9a1bfcd24317d 100644
--- a/drivers/platform/mellanox/mlxreg-lc.c
+++ b/drivers/platform/mellanox/mlxreg-lc.c
@@ -863,7 +863,6 @@ static int mlxreg_lc_probe(struct platform_device *pdev)
if (err) {
dev_err(&pdev->dev, "Failed to sync regmap for client %s at bus %d at addr 0x%02x\n",
data->hpdev.brdinfo->type, data->hpdev.nr, data->hpdev.brdinfo->addr);
- err = PTR_ERR(regmap);
goto regcache_sync_fail;
}
--
2.35.1
From: Diego Santa Cruz <[email protected]>
commit 919bef7a106ade2bda73681bbc2f3678198f44fc upstream.
The quirk added in upstream commit 90c3e2198777 ("drm/i915/glk: Add
Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva
Q2.
Note: Would be nicer to figure out the extra delay required for the
retimer without quirks, however don't know how to check for that.
Cc: [email protected]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326
Signed-off-by: Diego Santa Cruz <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 08e9505fa8f9aa00072a47b6f234d89b6b27a89c)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_quirks.c
+++ b/drivers/gpu/drm/i915/display/intel_quirks.c
@@ -191,6 +191,9 @@ static struct intel_quirk intel_quirks[]
/* ASRock ITX*/
{ 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
{ 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
+ /* ECS Liva Q2 */
+ { 0x3185, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time },
+ { 0x3184, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time },
};
void intel_init_quirks(struct drm_i915_private *i915)
From: Mickaël Salaün <[email protected]>
commit 55e55920bbe3ccf516022c51f5527e7d026b8f1d upstream.
This change fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right
when multiple rulesets/domains are stacked. The expected behaviour was
that an additional ruleset can only restrict the set of permitted
operations, but in this particular case, it was potentially possible to
re-gain the LANDLOCK_ACCESS_FS_REFER right.
With the introduction of LANDLOCK_ACCESS_FS_REFER, we added the first
globally denied-by-default access right. Indeed, this lifted an initial
Landlock limitation to rename and link files, which was initially always
denied when the source or the destination were different directories.
This led to an inconsistent backward compatibility behavior which was
only taken into account if no domain layer were using the new
LANDLOCK_ACCESS_FS_REFER right. However, when restricting a thread with
a new ruleset handling LANDLOCK_ACCESS_FS_REFER, all inherited parent
rulesets/layers not explicitly handling LANDLOCK_ACCESS_FS_REFER would
behave as if they were handling this access right and with all their
rules allowing it. This means that renaming and linking files could
became allowed by these parent layers, but all the other required
accesses must also be granted: all layers must allow file removal or
creation, and renaming and linking operations cannot lead to privilege
escalation according to the Landlock policy. See detailed explanation
in commit b91c3e4ea756 ("landlock: Add support for file reparenting with
LANDLOCK_ACCESS_FS_REFER").
To say it another way, this bug may lift the renaming and linking
limitations of the initial Landlock version, and a same ruleset can
enforce different restrictions depending on previous or next enforced
ruleset (i.e. inconsistent behavior). The LANDLOCK_ACCESS_FS_REFER right
cannot give access to data not already allowed, but this doesn't follow
the contract of the first Landlock ABI. This fix puts back the
limitation for sandboxes that didn't opt-in for this additional right.
For instance, if a first ruleset allows LANDLOCK_ACCESS_FS_MAKE_REG on
/dst and LANDLOCK_ACCESS_FS_REMOVE_FILE on /src, renaming /src/file to
/dst/file is denied. However, without this fix, stacking a new ruleset
which allows LANDLOCK_ACCESS_FS_REFER on / would now permit the
sandboxed thread to rename /src/file to /dst/file .
This change fixes the (absolute) rule access rights, which now always
forbid LANDLOCK_ACCESS_FS_REFER except when it is explicitly allowed
when creating a rule.
Making all domain handle LANDLOCK_ACCESS_FS_REFER was an initial
approach but there is two downsides:
* it makes the code more complex because we still want to check that a
rule allowing LANDLOCK_ACCESS_FS_REFER is legitimate according to the
ruleset's handled access rights (i.e. ABI v1 != ABI v2);
* it would not allow to identify if the user created a ruleset
explicitly handling LANDLOCK_ACCESS_FS_REFER or not, which will be an
issue to audit Landlock.
Instead, this change adds an ACCESS_INITIALLY_DENIED list of
denied-by-default rights, which (only) contains
LANDLOCK_ACCESS_FS_REFER. All domains are treated as if they are also
handling this list, but without modifying their fs_access_masks field.
A side effect is that the errno code returned by rename(2) or link(2)
*may* be changed from EXDEV to EACCES according to the enforced
restrictions. Indeed, we now have the mechanic to identify if an access
is denied because of a required right (e.g. LANDLOCK_ACCESS_FS_MAKE_REG,
LANDLOCK_ACCESS_FS_REMOVE_FILE) or if it is denied because of missing
LANDLOCK_ACCESS_FS_REFER rights. This may result in different errno
codes than for the initial Landlock version, but this approach is more
consistent and better for rename/link compatibility reasons, and it
wasn't possible before (hence no backport to ABI v1). The
layout1.rename_file test reflects this change.
Add 4 layout1.refer_denied_by_default* test suites to check that the
behavior of a ruleset not handling LANDLOCK_ACCESS_FS_REFER (ABI v1) is
unchanged even if another layer handles LANDLOCK_ACCESS_FS_REFER (i.e.
ABI v1 precedence). Make sure rule's absolute access rights are correct
by testing with and without a matching path. Add test_rename() and
test_exchange() helpers.
Extend layout1.inval tests to check that a denied-by-default access
right is not necessarily part of a domain's handled access rights.
Test coverage for security/landlock is 95.3% of 599 lines according to
gcc/gcov-11.
Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Reviewed-by: Paul Moore <[email protected]>
Reviewed-by: Günther Noack <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
[mic: Constify and slightly simplify test helpers]
Signed-off-by: Mickaël Salaün <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/landlock/fs.c | 48 ++++---
tools/testing/selftests/landlock/fs_test.c | 155 +++++++++++++++++++--
2 files changed, 170 insertions(+), 33 deletions(-)
diff --git a/security/landlock/fs.c b/security/landlock/fs.c
index ec5a6247cd3e..a9dbd99d9ee7 100644
--- a/security/landlock/fs.c
+++ b/security/landlock/fs.c
@@ -149,6 +149,16 @@ retry:
LANDLOCK_ACCESS_FS_READ_FILE)
/* clang-format on */
+/*
+ * All access rights that are denied by default whether they are handled or not
+ * by a ruleset/layer. This must be ORed with all ruleset->fs_access_masks[]
+ * entries when we need to get the absolute handled access masks.
+ */
+/* clang-format off */
+#define ACCESS_INITIALLY_DENIED ( \
+ LANDLOCK_ACCESS_FS_REFER)
+/* clang-format on */
+
/*
* @path: Should have been checked by get_path_from_fd().
*/
@@ -167,7 +177,9 @@ int landlock_append_fs_rule(struct landlock_ruleset *const ruleset,
return -EINVAL;
/* Transforms relative access rights to absolute ones. */
- access_rights |= LANDLOCK_MASK_ACCESS_FS & ~ruleset->fs_access_masks[0];
+ access_rights |=
+ LANDLOCK_MASK_ACCESS_FS &
+ ~(ruleset->fs_access_masks[0] | ACCESS_INITIALLY_DENIED);
object = get_inode_object(d_backing_inode(path->dentry));
if (IS_ERR(object))
return PTR_ERR(object);
@@ -277,23 +289,12 @@ static inline bool is_nouser_or_private(const struct dentry *dentry)
static inline access_mask_t
get_handled_accesses(const struct landlock_ruleset *const domain)
{
- access_mask_t access_dom = 0;
- unsigned long access_bit;
-
- for (access_bit = 0; access_bit < LANDLOCK_NUM_ACCESS_FS;
- access_bit++) {
- size_t layer_level;
+ access_mask_t access_dom = ACCESS_INITIALLY_DENIED;
+ size_t layer_level;
- for (layer_level = 0; layer_level < domain->num_layers;
- layer_level++) {
- if (domain->fs_access_masks[layer_level] &
- BIT_ULL(access_bit)) {
- access_dom |= BIT_ULL(access_bit);
- break;
- }
- }
- }
- return access_dom;
+ for (layer_level = 0; layer_level < domain->num_layers; layer_level++)
+ access_dom |= domain->fs_access_masks[layer_level];
+ return access_dom & LANDLOCK_MASK_ACCESS_FS;
}
static inline access_mask_t
@@ -316,8 +317,13 @@ init_layer_masks(const struct landlock_ruleset *const domain,
for_each_set_bit(access_bit, &access_req,
ARRAY_SIZE(*layer_masks)) {
- if (domain->fs_access_masks[layer_level] &
- BIT_ULL(access_bit)) {
+ /*
+ * Artificially handles all initially denied by default
+ * access rights.
+ */
+ if (BIT_ULL(access_bit) &
+ (domain->fs_access_masks[layer_level] |
+ ACCESS_INITIALLY_DENIED)) {
(*layer_masks)[access_bit] |=
BIT_ULL(layer_level);
handled_accesses |= BIT_ULL(access_bit);
@@ -857,10 +863,6 @@ static int current_check_refer_path(struct dentry *const old_dentry,
NULL, NULL);
}
- /* Backward compatibility: no reparenting support. */
- if (!(get_handled_accesses(dom) & LANDLOCK_ACCESS_FS_REFER))
- return -EXDEV;
-
access_request_parent1 |= LANDLOCK_ACCESS_FS_REFER;
access_request_parent2 |= LANDLOCK_ACCESS_FS_REFER;
diff --git a/tools/testing/selftests/landlock/fs_test.c b/tools/testing/selftests/landlock/fs_test.c
index 21a2ce8fa739..45de42a027c5 100644
--- a/tools/testing/selftests/landlock/fs_test.c
+++ b/tools/testing/selftests/landlock/fs_test.c
@@ -4,7 +4,7 @@
*
* Copyright © 2017-2020 Mickaël Salaün <[email protected]>
* Copyright © 2020 ANSSI
- * Copyright © 2020-2021 Microsoft Corporation
+ * Copyright © 2020-2022 Microsoft Corporation
*/
#define _GNU_SOURCE
@@ -371,6 +371,13 @@ TEST_F_FORK(layout1, inval)
ASSERT_EQ(EINVAL, errno);
path_beneath.allowed_access &= ~LANDLOCK_ACCESS_FS_EXECUTE;
+ /* Tests with denied-by-default access right. */
+ path_beneath.allowed_access |= LANDLOCK_ACCESS_FS_REFER;
+ ASSERT_EQ(-1, landlock_add_rule(ruleset_fd, LANDLOCK_RULE_PATH_BENEATH,
+ &path_beneath, 0));
+ ASSERT_EQ(EINVAL, errno);
+ path_beneath.allowed_access &= ~LANDLOCK_ACCESS_FS_REFER;
+
/* Test with unknown (64-bits) value. */
path_beneath.allowed_access |= (1ULL << 60);
ASSERT_EQ(-1, landlock_add_rule(ruleset_fd, LANDLOCK_RULE_PATH_BENEATH,
@@ -1826,6 +1833,20 @@ TEST_F_FORK(layout1, link)
ASSERT_EQ(0, link(file1_s1d3, file2_s1d3));
}
+static int test_rename(const char *const oldpath, const char *const newpath)
+{
+ if (rename(oldpath, newpath))
+ return errno;
+ return 0;
+}
+
+static int test_exchange(const char *const oldpath, const char *const newpath)
+{
+ if (renameat2(AT_FDCWD, oldpath, AT_FDCWD, newpath, RENAME_EXCHANGE))
+ return errno;
+ return 0;
+}
+
TEST_F_FORK(layout1, rename_file)
{
const struct rule rules[] = {
@@ -1867,10 +1888,10 @@ TEST_F_FORK(layout1, rename_file)
* to a different directory (which allows file removal).
*/
ASSERT_EQ(-1, rename(file1_s2d1, file1_s1d3));
- ASSERT_EQ(EXDEV, errno);
+ ASSERT_EQ(EACCES, errno);
ASSERT_EQ(-1, renameat2(AT_FDCWD, file1_s2d1, AT_FDCWD, file1_s1d3,
RENAME_EXCHANGE));
- ASSERT_EQ(EXDEV, errno);
+ ASSERT_EQ(EACCES, errno);
ASSERT_EQ(-1, renameat2(AT_FDCWD, dir_s2d2, AT_FDCWD, file1_s1d3,
RENAME_EXCHANGE));
ASSERT_EQ(EXDEV, errno);
@@ -1894,7 +1915,7 @@ TEST_F_FORK(layout1, rename_file)
ASSERT_EQ(EXDEV, errno);
ASSERT_EQ(0, unlink(file1_s1d3));
ASSERT_EQ(-1, rename(file1_s2d1, file1_s1d3));
- ASSERT_EQ(EXDEV, errno);
+ ASSERT_EQ(EACCES, errno);
/* Exchanges and renames files with same parent. */
ASSERT_EQ(0, renameat2(AT_FDCWD, file2_s2d3, AT_FDCWD, file1_s2d3,
@@ -2014,6 +2035,115 @@ TEST_F_FORK(layout1, reparent_refer)
ASSERT_EQ(0, rename(dir_s1d3, dir_s2d3));
}
+/* Checks renames beneath dir_s1d1. */
+static void refer_denied_by_default(struct __test_metadata *const _metadata,
+ const struct rule layer1[],
+ const int layer1_err,
+ const struct rule layer2[])
+{
+ int ruleset_fd;
+
+ ASSERT_EQ(0, unlink(file1_s1d2));
+
+ ruleset_fd = create_ruleset(_metadata, layer1[0].access, layer1);
+ ASSERT_LE(0, ruleset_fd);
+ enforce_ruleset(_metadata, ruleset_fd);
+ ASSERT_EQ(0, close(ruleset_fd));
+
+ /*
+ * If the first layer handles LANDLOCK_ACCESS_FS_REFER (according to
+ * layer1_err), then it allows some different-parent renames and links.
+ */
+ ASSERT_EQ(layer1_err, test_rename(file1_s1d1, file1_s1d2));
+ if (layer1_err == 0)
+ ASSERT_EQ(layer1_err, test_rename(file1_s1d2, file1_s1d1));
+ ASSERT_EQ(layer1_err, test_exchange(file2_s1d1, file2_s1d2));
+ ASSERT_EQ(layer1_err, test_exchange(file2_s1d2, file2_s1d1));
+
+ ruleset_fd = create_ruleset(_metadata, layer2[0].access, layer2);
+ ASSERT_LE(0, ruleset_fd);
+ enforce_ruleset(_metadata, ruleset_fd);
+ ASSERT_EQ(0, close(ruleset_fd));
+
+ /*
+ * Now, either the first or the second layer does not handle
+ * LANDLOCK_ACCESS_FS_REFER, which means that any different-parent
+ * renames and links are denied, thus making the layer handling
+ * LANDLOCK_ACCESS_FS_REFER null and void.
+ */
+ ASSERT_EQ(EXDEV, test_rename(file1_s1d1, file1_s1d2));
+ ASSERT_EQ(EXDEV, test_exchange(file2_s1d1, file2_s1d2));
+ ASSERT_EQ(EXDEV, test_exchange(file2_s1d2, file2_s1d1));
+}
+
+const struct rule layer_dir_s1d1_refer[] = {
+ {
+ .path = dir_s1d1,
+ .access = LANDLOCK_ACCESS_FS_REFER,
+ },
+ {},
+};
+
+const struct rule layer_dir_s1d1_execute[] = {
+ {
+ /* Matches a parent directory. */
+ .path = dir_s1d1,
+ .access = LANDLOCK_ACCESS_FS_EXECUTE,
+ },
+ {},
+};
+
+const struct rule layer_dir_s2d1_execute[] = {
+ {
+ /* Does not match a parent directory. */
+ .path = dir_s2d1,
+ .access = LANDLOCK_ACCESS_FS_EXECUTE,
+ },
+ {},
+};
+
+/*
+ * Tests precedence over renames: denied by default for different parent
+ * directories, *with* a rule matching a parent directory, but not directly
+ * denying access (with MAKE_REG nor REMOVE).
+ */
+TEST_F_FORK(layout1, refer_denied_by_default1)
+{
+ refer_denied_by_default(_metadata, layer_dir_s1d1_refer, 0,
+ layer_dir_s1d1_execute);
+}
+
+/*
+ * Same test but this time turning around the ABI version order: the first
+ * layer does not handle LANDLOCK_ACCESS_FS_REFER.
+ */
+TEST_F_FORK(layout1, refer_denied_by_default2)
+{
+ refer_denied_by_default(_metadata, layer_dir_s1d1_execute, EXDEV,
+ layer_dir_s1d1_refer);
+}
+
+/*
+ * Tests precedence over renames: denied by default for different parent
+ * directories, *without* a rule matching a parent directory, but not directly
+ * denying access (with MAKE_REG nor REMOVE).
+ */
+TEST_F_FORK(layout1, refer_denied_by_default3)
+{
+ refer_denied_by_default(_metadata, layer_dir_s1d1_refer, 0,
+ layer_dir_s2d1_execute);
+}
+
+/*
+ * Same test but this time turning around the ABI version order: the first
+ * layer does not handle LANDLOCK_ACCESS_FS_REFER.
+ */
+TEST_F_FORK(layout1, refer_denied_by_default4)
+{
+ refer_denied_by_default(_metadata, layer_dir_s2d1_execute, EXDEV,
+ layer_dir_s1d1_refer);
+}
+
TEST_F_FORK(layout1, reparent_link)
{
const struct rule layer1[] = {
@@ -2336,11 +2466,12 @@ TEST_F_FORK(layout1, reparent_exdev_layers_rename1)
ASSERT_EQ(EXDEV, errno);
/*
- * However, moving the file2_s1d3 file below dir_s2d3 is allowed
- * because it cannot inherit MAKE_REG nor MAKE_DIR rights (which are
- * dedicated to directories).
+ * Moving the file2_s1d3 file below dir_s2d3 is denied because the
+ * second layer does not handle REFER, which is always denied by
+ * default.
*/
- ASSERT_EQ(0, rename(file2_s1d3, file1_s2d3));
+ ASSERT_EQ(-1, rename(file2_s1d3, file1_s2d3));
+ ASSERT_EQ(EXDEV, errno);
}
TEST_F_FORK(layout1, reparent_exdev_layers_rename2)
@@ -2373,8 +2504,12 @@ TEST_F_FORK(layout1, reparent_exdev_layers_rename2)
ASSERT_EQ(EACCES, errno);
ASSERT_EQ(-1, rename(file1_s1d1, file1_s2d3));
ASSERT_EQ(EXDEV, errno);
- /* Modify layout! */
- ASSERT_EQ(0, rename(file2_s1d2, file1_s2d3));
+ /*
+ * Modifying the layout is now denied because the second layer does not
+ * handle REFER, which is always denied by default.
+ */
+ ASSERT_EQ(-1, rename(file2_s1d2, file1_s2d3));
+ ASSERT_EQ(EXDEV, errno);
/* Without REFER source, EACCES wins over EXDEV. */
ASSERT_EQ(-1, rename(dir_s1d1, file1_s2d2));
--
2.37.3
From: Peter Robinson <[email protected]>
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]
Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.
Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/misc/rk805-pwrkey.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/misc/rk805-pwrkey.c b/drivers/input/misc/rk805-pwrkey.c
index 3fb64dbda1a21..76873aa005b41 100644
--- a/drivers/input/misc/rk805-pwrkey.c
+++ b/drivers/input/misc/rk805-pwrkey.c
@@ -98,6 +98,7 @@ static struct platform_driver rk805_pwrkey_driver = {
};
module_platform_driver(rk805_pwrkey_driver);
+MODULE_ALIAS("platform:rk805-pwrkey");
MODULE_AUTHOR("Joseph Chen <[email protected]>");
MODULE_DESCRIPTION("RK805 PMIC Power Key driver");
MODULE_LICENSE("GPL");
--
2.35.1
From: Christian König <[email protected]>
commit a3f7c10a269d5b77dd5822ade822643ced3057f0 upstream.
Previously when we added a fence to a dma_resv object we always
assumed the the newer than all the existing fences.
With Jason's work to add an UAPI to explicit export/import that's not
necessary the case any more. So without this check we would allow
userspace to force the kernel into an use after free error.
Since the change is very small and defensive it's probably a good
idea to backport this to stable kernels as well just in case others
are using the dma_resv object in the same way.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Jason Ekstrand <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: [email protected] # v5.19+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma-buf/dma-resv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/dma-buf/dma-resv.c
+++ b/drivers/dma-buf/dma-resv.c
@@ -295,7 +295,8 @@ void dma_resv_add_fence(struct dma_resv
enum dma_resv_usage old_usage;
dma_resv_list_entry(fobj, i, obj, &old, &old_usage);
- if ((old->context == fence->context && old_usage >= usage) ||
+ if ((old->context == fence->context && old_usage >= usage &&
+ dma_fence_is_later(fence, old)) ||
dma_fence_is_signaled(old)) {
dma_resv_list_set(fobj, i, fence, usage);
dma_fence_put(old);
From: Badhri Jagan Sridharan <[email protected]>
commit f2d38edc5e3375e56b4a30d5b66cefd385a2b38c upstream.
When the port does not support USB PD, prevent transition to PD
only states when power supply property is written. In this case,
TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
which should not be the case given that the port is not pd_capable.
[ 84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
[ 84.308335] Setting usb_comm capable false
[ 84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
[ 84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
Fixes: e9e6e164ed8f6 ("usb: typec: tcpm: Support non-PD mode")
Cc: [email protected]
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -6191,6 +6191,13 @@ static int tcpm_psy_set_prop(struct powe
struct tcpm_port *port = power_supply_get_drvdata(psy);
int ret;
+ /*
+ * All the properties below are related to USB PD. The check needs to be
+ * property specific when a non-pd related property is added.
+ */
+ if (!port->pd_supported)
+ return -EOPNOTSUPP;
+
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = tcpm_psy_set_online(port, val);
From: Dan Carpenter <[email protected]>
[ Upstream commit 13a9d08c296228d18289de60b83792c586e1d073 ]
Don't just print a warning. Clean up and return an error as well.
Fixes: c8349639324a ("net: lan966x: Add FDMA functionality")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kili
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
index 6dea7f8c14814..51f8a08163777 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
@@ -425,7 +425,8 @@ static struct sk_buff *lan966x_fdma_rx_get_frame(struct lan966x_rx *rx)
lan966x_ifh_get_src_port(skb->data, &src_port);
lan966x_ifh_get_timestamp(skb->data, ×tamp);
- WARN_ON(src_port >= lan966x->num_phys_ports);
+ if (WARN_ON(src_port >= lan966x->num_phys_ports))
+ goto free_skb;
skb->dev = lan966x->ports[src_port]->dev;
skb_pull(skb, IFH_LEN * sizeof(u32));
@@ -449,6 +450,8 @@ static struct sk_buff *lan966x_fdma_rx_get_frame(struct lan966x_rx *rx)
return skb;
+free_skb:
+ kfree_skb(skb);
unmap_page:
dma_unmap_page(lan966x->dev, (dma_addr_t)db->dataptr,
FDMA_DCB_STATUS_BLOCKL(db->status),
--
2.35.1
From: Kumar Kartikeya Dwivedi <[email protected]>
[ Upstream commit 2fc31465c5373b5ca4edf2e5238558cb62902311 ]
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 20df58c351abf..339147061127a 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6066,6 +6066,9 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
return -EACCES;
}
meta->mem_size = reg->var_off.value;
+ err = mark_chain_precision(env, regno);
+ if (err)
+ return err;
break;
case ARG_PTR_TO_INT:
case ARG_PTR_TO_LONG:
--
2.35.1
From: Shenwei Wang <[email protected]>
commit 846651eca073e2e02e37490a4a52752415d84781 upstream.
The setting of RS485 RTS polarity is inverse in the current driver.
When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.
Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <[email protected]>
Signed-off-by: Nicolas Diaz <[email protected]>
Signed-off-by: Shenwei Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1381,9 +1381,9 @@ static int lpuart_config_rs485(struct ua
* Note: UART is assumed to be active high.
*/
if (rs485->flags & SER_RS485_RTS_ON_SEND)
- modem &= ~UARTMODEM_TXRTSPOL;
- else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
modem |= UARTMODEM_TXRTSPOL;
+ else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ modem &= ~UARTMODEM_TXRTSPOL;
}
writeb(modem, sport->port.membase + UARTMODEM);
From: Johan Hovold <[email protected]>
commit 9baa1415d9abdd1e08362ea2dcfadfacee8690b5 upstream.
Add the missing sanity check on the probed-session count to avoid
corrupting memory beyond the fixed-size slab-allocated session array
when there are more than FASTRPC_MAX_SESSIONS sessions defined in the
devicetree.
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: [email protected] # 5.1
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/fastrpc.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1943,6 +1943,11 @@ static int fastrpc_cb_probe(struct platf
of_property_read_u32(dev->of_node, "qcom,nsessions", &sessions);
spin_lock_irqsave(&cctx->lock, flags);
+ if (cctx->sesscount >= FASTRPC_MAX_SESSIONS) {
+ dev_err(&pdev->dev, "too many sessions\n");
+ spin_unlock_irqrestore(&cctx->lock, flags);
+ return -ENOSPC;
+ }
sess = &cctx->session[cctx->sesscount];
sess->used = false;
sess->valid = true;
From: Douglas Anderson <[email protected]>
[ Upstream commit a1653a75987749ba6dba94fa2e62f0f36b387d1a ]
1 regulator is listed but the number 2 is specified. This presumably
means we try to get a regulator with no name. Fix it.
Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/496323/
Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid
Signed-off-by: Abhinav Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
index 02000a7b7a18c..72c018e26f47f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c
@@ -148,7 +148,7 @@ static const char * const dsi_sdm660_bus_clk_names[] = {
static const struct msm_dsi_config sdm660_dsi_cfg = {
.io_offset = DSI_6G_REG_SHIFT,
.reg_cfg = {
- .num = 2,
+ .num = 1,
.regs = {
{"vdda", 12560, 4 }, /* 1.2 V */
},
--
2.35.1
From: Niek Nooijens <[email protected]>
commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.
works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null
but doing this every reboot is a pain in the ass.
Signed-off-by: Niek Nooijens <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 2 ++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 8 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1045,6 +1045,8 @@ static const struct usb_device_id id_tab
/* IDS GmbH devices */
{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+ /* Omron devices */
+ { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -662,6 +662,12 @@
#define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
/*
+ * Omron corporation (https://www.omron.com)
+ */
+ #define OMRON_VID 0x0590
+ #define OMRON_CS1W_CIF31_PID 0x00b2
+
+/*
* Acton Research Corp.
*/
#define ACTON_VID 0x0647 /* Vendor ID */
From: Levi Yun <[email protected]>
commit 4831be702b95047c89b3fa5728d07091e9e9f7c9 upstream.
Like crashk_res, Calling crash_exclude_mem_range function with
crashk_low_res area would need extra crash_mem range too.
Add one more extra cmem slot in case of crashk_low_res is used.
Signed-off-by: Levi Yun <[email protected]>
Fixes: 944a45abfabc ("arm64: kdump: Reimplement crashkernel=X")
Cc: <[email protected]> # 5.19.x
Acked-by: Baoquan He <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/machine_kexec_file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -47,7 +47,7 @@ static int prepare_elf_headers(void **ad
u64 i;
phys_addr_t start, end;
- nr_ranges = 1; /* for exclusion of crashkernel region */
+ nr_ranges = 2; /* for exclusion of crashkernel region */
for_each_mem_range(i, &start, &end)
nr_ranges++;
From: Chunfeng Yun <[email protected]>
commit 6020f480004a80cdad4ae5ee180a231c4f65595b upstream.
This happens when @udev->reset_resume is set to true, when usb resume,
the flow as below:
- hub_resume
- usb_disable_interface
- usb_disable_endpoint
- usb_hcd_disable_endpoint
- xhci_endpoint_disable // it set @ep->hcpriv to NULL
Then when reset usb device, it will drop allocated endpoints,
the flow as below:
- usb_reset_and_verify_device
- usb_hcd_alloc_bandwidth
- xhci_mtk_drop_ep
but @ep->hcpriv is already set to NULL, the bandwidth will be not
released anymore.
Due to the added endponts are stored in hash table, we can drop the check
of @ep->hcpriv.
Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint")
Cc: stable <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mtk-sch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -764,8 +764,8 @@ int xhci_mtk_drop_ep(struct usb_hcd *hcd
if (ret)
return ret;
- if (ep->hcpriv)
- drop_ep_quirk(hcd, udev, ep);
+ /* needn't check @ep->hcpriv, xhci_endpoint_disable set it NULL */
+ drop_ep_quirk(hcd, udev, ep);
return 0;
}
From: Joanne Koong <[email protected]>
[ Upstream commit 8ab4cdcf03d0b060fbf73f76460f199bbd759ff7 ]
This patch does two things:
1. For matching against the arg type, the match should be against the
base type of the arg type, since the arg type can have different
bpf_type_flags set on it.
2. Uses switch casing to improve readability + efficiency.
Signed-off-by: Joanne Koong <[email protected]>
Acked-by: Hao Luo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 66 +++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 28 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f0dd73bf69ddf..20df58c351abf 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5533,17 +5533,6 @@ static bool arg_type_is_mem_size(enum bpf_arg_type type)
type == ARG_CONST_SIZE_OR_ZERO;
}
-static bool arg_type_is_alloc_size(enum bpf_arg_type type)
-{
- return type == ARG_CONST_ALLOC_SIZE_OR_ZERO;
-}
-
-static bool arg_type_is_int_ptr(enum bpf_arg_type type)
-{
- return type == ARG_PTR_TO_INT ||
- type == ARG_PTR_TO_LONG;
-}
-
static bool arg_type_is_release(enum bpf_arg_type type)
{
return type & OBJ_RELEASE;
@@ -5929,7 +5918,8 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
meta->ref_obj_id = reg->ref_obj_id;
}
- if (arg_type == ARG_CONST_MAP_PTR) {
+ switch (base_type(arg_type)) {
+ case ARG_CONST_MAP_PTR:
/* bpf_map_xxx(map_ptr) call: remember that map_ptr */
if (meta->map_ptr) {
/* Use map_uid (which is unique id of inner map) to reject:
@@ -5954,7 +5944,8 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
}
meta->map_ptr = reg->map_ptr;
meta->map_uid = reg->map_uid;
- } else if (arg_type == ARG_PTR_TO_MAP_KEY) {
+ break;
+ case ARG_PTR_TO_MAP_KEY:
/* bpf_map_xxx(..., map_ptr, ..., key) call:
* check that [key, key + map->key_size) are within
* stack limits and initialized
@@ -5971,7 +5962,8 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
err = check_helper_mem_access(env, regno,
meta->map_ptr->key_size, false,
NULL);
- } else if (base_type(arg_type) == ARG_PTR_TO_MAP_VALUE) {
+ break;
+ case ARG_PTR_TO_MAP_VALUE:
if (type_may_be_null(arg_type) && register_is_null(reg))
return 0;
@@ -5987,14 +5979,16 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
err = check_helper_mem_access(env, regno,
meta->map_ptr->value_size, false,
meta);
- } else if (arg_type == ARG_PTR_TO_PERCPU_BTF_ID) {
+ break;
+ case ARG_PTR_TO_PERCPU_BTF_ID:
if (!reg->btf_id) {
verbose(env, "Helper has invalid btf_id in R%d\n", regno);
return -EACCES;
}
meta->ret_btf = reg->btf;
meta->ret_btf_id = reg->btf_id;
- } else if (arg_type == ARG_PTR_TO_SPIN_LOCK) {
+ break;
+ case ARG_PTR_TO_SPIN_LOCK:
if (meta->func_id == BPF_FUNC_spin_lock) {
if (process_spin_lock(env, regno, true))
return -EACCES;
@@ -6005,12 +5999,15 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
verbose(env, "verifier internal error\n");
return -EFAULT;
}
- } else if (arg_type == ARG_PTR_TO_TIMER) {
+ break;
+ case ARG_PTR_TO_TIMER:
if (process_timer_func(env, regno, meta))
return -EACCES;
- } else if (arg_type == ARG_PTR_TO_FUNC) {
+ break;
+ case ARG_PTR_TO_FUNC:
meta->subprogno = reg->subprogno;
- } else if (base_type(arg_type) == ARG_PTR_TO_MEM) {
+ break;
+ case ARG_PTR_TO_MEM:
/* The access to this pointer is only checked when we hit the
* next is_mem_size argument below.
*/
@@ -6020,11 +6017,14 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
fn->arg_size[arg], false,
meta);
}
- } else if (arg_type_is_mem_size(arg_type)) {
- bool zero_size_allowed = (arg_type == ARG_CONST_SIZE_OR_ZERO);
-
- err = check_mem_size_reg(env, reg, regno, zero_size_allowed, meta);
- } else if (arg_type_is_dynptr(arg_type)) {
+ break;
+ case ARG_CONST_SIZE:
+ err = check_mem_size_reg(env, reg, regno, false, meta);
+ break;
+ case ARG_CONST_SIZE_OR_ZERO:
+ err = check_mem_size_reg(env, reg, regno, true, meta);
+ break;
+ case ARG_PTR_TO_DYNPTR:
if (arg_type & MEM_UNINIT) {
if (!is_dynptr_reg_valid_uninit(env, reg)) {
verbose(env, "Dynptr has to be an uninitialized dynptr\n");
@@ -6058,21 +6058,28 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
err_extra, arg + 1);
return -EINVAL;
}
- } else if (arg_type_is_alloc_size(arg_type)) {
+ break;
+ case ARG_CONST_ALLOC_SIZE_OR_ZERO:
if (!tnum_is_const(reg->var_off)) {
verbose(env, "R%d is not a known constant'\n",
regno);
return -EACCES;
}
meta->mem_size = reg->var_off.value;
- } else if (arg_type_is_int_ptr(arg_type)) {
+ break;
+ case ARG_PTR_TO_INT:
+ case ARG_PTR_TO_LONG:
+ {
int size = int_ptr_type_to_size(arg_type);
err = check_helper_mem_access(env, regno, size, false, meta);
if (err)
return err;
err = check_ptr_alignment(env, reg, 0, size, true);
- } else if (arg_type == ARG_PTR_TO_CONST_STR) {
+ break;
+ }
+ case ARG_PTR_TO_CONST_STR:
+ {
struct bpf_map *map = reg->map_ptr;
int map_off;
u64 map_addr;
@@ -6111,9 +6118,12 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
verbose(env, "string is not zero-terminated\n");
return -EINVAL;
}
- } else if (arg_type == ARG_PTR_TO_KPTR) {
+ break;
+ }
+ case ARG_PTR_TO_KPTR:
if (process_kptr_func(env, regno, meta))
return -EACCES;
+ break;
}
return err;
--
2.35.1
From: Takashi Iwai <[email protected]>
commit a8d302a0b77057568350fe0123e639d02dba0745 upstream.
We dropped the x86-specific hack for WC-page allocations with a hope
that the standard dma_alloc_wc() works nowadays. Alas, it doesn't,
and we need to take back some workaround again, but in a different
form, as the previous one was broken for some platforms.
This patch re-introduces the x86-specific WC-page allocations, but it
uses rather the manual page allocations instead of
dma_alloc_coherent(). The use of dma_alloc_coherent() was also a
potential problem in the recent addition of the fallback allocation
for noncontig pages, and this patch eliminates both at once.
Fixes: 9882d63bea14 ("ALSA: memalloc: Drop x86-specific hack for WC allocations")
Cc: <[email protected]>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/memalloc.c | 87 ++++++++++++++++++++++++++++++++++++++++----------
1 file changed, 71 insertions(+), 16 deletions(-)
--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -20,6 +20,13 @@
static const struct snd_malloc_ops *snd_dma_get_ops(struct snd_dma_buffer *dmab);
+#ifdef CONFIG_SND_DMA_SGBUF
+static void *do_alloc_fallback_pages(struct device *dev, size_t size,
+ dma_addr_t *addr, bool wc);
+static void do_free_fallback_pages(void *p, size_t size, bool wc);
+static void *snd_dma_sg_fallback_alloc(struct snd_dma_buffer *dmab, size_t size);
+#endif
+
/* a cast to gfp flag from the dev pointer; for CONTINUOUS and VMALLOC types */
static inline gfp_t snd_mem_get_gfp_flags(const struct snd_dma_buffer *dmab,
gfp_t default_gfp)
@@ -269,16 +276,21 @@ EXPORT_SYMBOL(snd_sgbuf_get_chunk_size);
/*
* Continuous pages allocator
*/
-static void *snd_dma_continuous_alloc(struct snd_dma_buffer *dmab, size_t size)
+static void *do_alloc_pages(size_t size, dma_addr_t *addr, gfp_t gfp)
{
- gfp_t gfp = snd_mem_get_gfp_flags(dmab, GFP_KERNEL);
void *p = alloc_pages_exact(size, gfp);
if (p)
- dmab->addr = page_to_phys(virt_to_page(p));
+ *addr = page_to_phys(virt_to_page(p));
return p;
}
+static void *snd_dma_continuous_alloc(struct snd_dma_buffer *dmab, size_t size)
+{
+ return do_alloc_pages(size, &dmab->addr,
+ snd_mem_get_gfp_flags(dmab, GFP_KERNEL));
+}
+
static void snd_dma_continuous_free(struct snd_dma_buffer *dmab)
{
free_pages_exact(dmab->area, dmab->bytes);
@@ -455,6 +467,25 @@ static const struct snd_malloc_ops snd_d
/*
* Write-combined pages
*/
+/* x86-specific allocations */
+#ifdef CONFIG_SND_DMA_SGBUF
+static void *snd_dma_wc_alloc(struct snd_dma_buffer *dmab, size_t size)
+{
+ return do_alloc_fallback_pages(dmab->dev.dev, size, &dmab->addr, true);
+}
+
+static void snd_dma_wc_free(struct snd_dma_buffer *dmab)
+{
+ do_free_fallback_pages(dmab->area, dmab->bytes, true);
+}
+
+static int snd_dma_wc_mmap(struct snd_dma_buffer *dmab,
+ struct vm_area_struct *area)
+{
+ area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
+ return snd_dma_continuous_mmap(dmab, area);
+}
+#else
static void *snd_dma_wc_alloc(struct snd_dma_buffer *dmab, size_t size)
{
return dma_alloc_wc(dmab->dev.dev, size, &dmab->addr, DEFAULT_GFP);
@@ -471,6 +502,7 @@ static int snd_dma_wc_mmap(struct snd_dm
return dma_mmap_wc(dmab->dev.dev, area,
dmab->area, dmab->addr, dmab->bytes);
}
+#endif /* CONFIG_SND_DMA_SGBUF */
static const struct snd_malloc_ops snd_dma_wc_ops = {
.alloc = snd_dma_wc_alloc,
@@ -478,10 +510,6 @@ static const struct snd_malloc_ops snd_d
.mmap = snd_dma_wc_mmap,
};
-#ifdef CONFIG_SND_DMA_SGBUF
-static void *snd_dma_sg_fallback_alloc(struct snd_dma_buffer *dmab, size_t size);
-#endif
-
/*
* Non-contiguous pages allocator
*/
@@ -661,6 +689,37 @@ static const struct snd_malloc_ops snd_d
.get_chunk_size = snd_dma_noncontig_get_chunk_size,
};
+/* manual page allocations with wc setup */
+static void *do_alloc_fallback_pages(struct device *dev, size_t size,
+ dma_addr_t *addr, bool wc)
+{
+ gfp_t gfp = GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN;
+ void *p;
+
+ again:
+ p = do_alloc_pages(size, addr, gfp);
+ if (!p || (*addr + size - 1) & ~dev->coherent_dma_mask) {
+ if (IS_ENABLED(CONFIG_ZONE_DMA32) && !(gfp & GFP_DMA32)) {
+ gfp |= GFP_DMA32;
+ goto again;
+ }
+ if (IS_ENABLED(CONFIG_ZONE_DMA) && !(gfp & GFP_DMA)) {
+ gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
+ goto again;
+ }
+ }
+ if (p && wc)
+ set_memory_wc((unsigned long)(p), size >> PAGE_SHIFT);
+ return p;
+}
+
+static void do_free_fallback_pages(void *p, size_t size, bool wc)
+{
+ if (wc)
+ set_memory_wb((unsigned long)(p), size >> PAGE_SHIFT);
+ free_pages_exact(p, size);
+}
+
/* Fallback SG-buffer allocations for x86 */
struct snd_dma_sg_fallback {
size_t count;
@@ -671,14 +730,11 @@ struct snd_dma_sg_fallback {
static void __snd_dma_sg_fallback_free(struct snd_dma_buffer *dmab,
struct snd_dma_sg_fallback *sgbuf)
{
+ bool wc = dmab->dev.type == SNDRV_DMA_TYPE_DEV_WC_SG_FALLBACK;
size_t i;
- if (sgbuf->count && dmab->dev.type == SNDRV_DMA_TYPE_DEV_WC_SG_FALLBACK)
- set_pages_array_wb(sgbuf->pages, sgbuf->count);
for (i = 0; i < sgbuf->count && sgbuf->pages[i]; i++)
- dma_free_coherent(dmab->dev.dev, PAGE_SIZE,
- page_address(sgbuf->pages[i]),
- sgbuf->addrs[i]);
+ do_free_fallback_pages(page_address(sgbuf->pages[i]), PAGE_SIZE, wc);
kvfree(sgbuf->pages);
kvfree(sgbuf->addrs);
kfree(sgbuf);
@@ -690,6 +746,7 @@ static void *snd_dma_sg_fallback_alloc(s
struct page **pages;
size_t i, count;
void *p;
+ bool wc = dmab->dev.type == SNDRV_DMA_TYPE_DEV_WC_SG_FALLBACK;
sgbuf = kzalloc(sizeof(*sgbuf), GFP_KERNEL);
if (!sgbuf)
@@ -704,15 +761,13 @@ static void *snd_dma_sg_fallback_alloc(s
goto error;
for (i = 0; i < count; sgbuf->count++, i++) {
- p = dma_alloc_coherent(dmab->dev.dev, PAGE_SIZE,
- &sgbuf->addrs[i], DEFAULT_GFP);
+ p = do_alloc_fallback_pages(dmab->dev.dev, PAGE_SIZE,
+ &sgbuf->addrs[i], wc);
if (!p)
goto error;
sgbuf->pages[i] = virt_to_page(p);
}
- if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_WC_SG_FALLBACK)
- set_pages_array_wc(pages, count);
p = vmap(pages, count, VM_MAP, PAGE_KERNEL);
if (!p)
goto error;
From: Sergiu Moga <[email protected]>
commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 upstream.
Whenever the atmel_rs485_config() driver method would be called,
the USART mode is reset to normal mode before even checking if
RS485 flag is set, thus resulting in losing the previous USART
mode in the case where the checking fails.
Some tools, such as `linux-serial-test`, lead to the driver calling
this method when doing the setup of the serial port: after setting the
port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.),
`linux-serial-test` tries to enable/disable RS485 depending on
the commandline arguments that were passed.
Example of how this issue could reveal itself:
When doing a serial communication with Hardware Flow Control through
`linux-serial-test`, the tool would lead to the driver roughly doing
the following:
- set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the
ATMEL_US_MR register) through the atmel_set_termios() to enable
Hardware Flow Control
- disable RS485 through the atmel_config_rs485() method
Thus, when the latter is called, the mode will be reset and the
previously set bit is unset, leaving USART in normal mode instead of
the expected Hardware Flow Control mode.
This fix ensures that this reset is only done if the checking for
RS485 succeeds and that the previous mode is preserved otherwise.
Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications")
Cc: stable <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sergiu Moga <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -296,9 +296,6 @@ static int atmel_config_rs485(struct uar
mode = atmel_uart_readl(port, ATMEL_US_MR);
- /* Resetting serial mode to RS232 (0x0) */
- mode &= ~ATMEL_US_USMODE;
-
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
if (rs485conf->flags & SER_RS485_RX_DURING_TX)
@@ -308,6 +305,7 @@ static int atmel_config_rs485(struct uar
atmel_uart_writel(port, ATMEL_US_TTGR,
rs485conf->delay_rts_after_send);
+ mode &= ~ATMEL_US_USMODE;
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
From: Jing Leng <[email protected]>
commit f511aef2ebe5377d4c263842f2e0c0b8e274e8e5 upstream.
On page 362 of the USB3.2 specification (
https://usb.org/sites/default/files/usb_32_20210125.zip),
The 'SuperSpeed Endpoint Companion Descriptor' shall only be returned
by Enhanced SuperSpeed devices that are operating at Gen X speed.
Each endpoint described in an interface is followed by a 'SuperSpeed
Endpoint Companion Descriptor'.
If users use SuperSpeed UDC, host can't recognize the device if endpoint
doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed.
Currently in the uac2 driver code:
1. ss_epout_desc_comp follows ss_epout_desc;
2. ss_epin_fback_desc_comp follows ss_epin_fback_desc;
3. ss_epin_desc_comp follows ss_epin_desc;
4. Only ss_ep_int_desc endpoint doesn't have 'SuperSpeed Endpoint
Companion Descriptor' followed, so we should add it.
Fixes: eaf6cbe09920 ("usb: gadget: f_uac2: add volume and mute support")
Cc: stable <[email protected]>
Signed-off-by: Jing Leng <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_uac2.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -291,6 +291,12 @@ static struct usb_endpoint_descriptor ss
.bInterval = 4,
};
+static struct usb_ss_ep_comp_descriptor ss_ep_int_desc_comp = {
+ .bLength = sizeof(ss_ep_int_desc_comp),
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+ .wBytesPerInterval = cpu_to_le16(6),
+};
+
/* Audio Streaming OUT Interface - Alt0 */
static struct usb_interface_descriptor std_as_out_if0_desc = {
.bLength = sizeof std_as_out_if0_desc,
@@ -604,7 +610,8 @@ static struct usb_descriptor_header *ss_
(struct usb_descriptor_header *)&in_feature_unit_desc,
(struct usb_descriptor_header *)&io_out_ot_desc,
- (struct usb_descriptor_header *)&ss_ep_int_desc,
+ (struct usb_descriptor_header *)&ss_ep_int_desc,
+ (struct usb_descriptor_header *)&ss_ep_int_desc_comp,
(struct usb_descriptor_header *)&std_as_out_if0_desc,
(struct usb_descriptor_header *)&std_as_out_if1_desc,
@@ -800,6 +807,7 @@ static void setup_headers(struct f_uac2_
struct usb_ss_ep_comp_descriptor *epout_desc_comp = NULL;
struct usb_ss_ep_comp_descriptor *epin_desc_comp = NULL;
struct usb_ss_ep_comp_descriptor *epin_fback_desc_comp = NULL;
+ struct usb_ss_ep_comp_descriptor *ep_int_desc_comp = NULL;
struct usb_endpoint_descriptor *epout_desc;
struct usb_endpoint_descriptor *epin_desc;
struct usb_endpoint_descriptor *epin_fback_desc;
@@ -827,6 +835,7 @@ static void setup_headers(struct f_uac2_
epin_fback_desc = &ss_epin_fback_desc;
epin_fback_desc_comp = &ss_epin_fback_desc_comp;
ep_int_desc = &ss_ep_int_desc;
+ ep_int_desc_comp = &ss_ep_int_desc_comp;
}
i = 0;
@@ -855,8 +864,11 @@ static void setup_headers(struct f_uac2_
if (EPOUT_EN(opts))
headers[i++] = USBDHDR(&io_out_ot_desc);
- if (FUOUT_EN(opts) || FUIN_EN(opts))
+ if (FUOUT_EN(opts) || FUIN_EN(opts)) {
headers[i++] = USBDHDR(ep_int_desc);
+ if (ep_int_desc_comp)
+ headers[i++] = USBDHDR(ep_int_desc_comp);
+ }
if (EPOUT_EN(opts)) {
headers[i++] = USBDHDR(&std_as_out_if0_desc);
From: Adrian Hunter <[email protected]>
commit 15c56208c79c340686869c31595c209d1431c5e8 upstream.
When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".
Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Seunghui Lee <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/sd.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1498,7 +1498,7 @@ retry:
mmc_remove_card(card);
goto retry;
}
- goto done;
+ goto cont;
}
}
@@ -1534,7 +1534,7 @@ retry:
mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
}
}
-
+cont:
if (!oldcard) {
/* Read/parse the extension registers. */
err = sd_read_ext_regs(card);
@@ -1566,7 +1566,7 @@ retry:
err = -EINVAL;
goto free_card;
}
-done:
+
host->card = card;
return 0;
From: Slark Xiao <[email protected]>
commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.
We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.
Test evidence as below:
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e2d ProdID=00f3 Rev=05.04
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00F3 USB Mobile Broadband
S: SerialNumber=d7b4be8d
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e2d ProdID=00f4 Rev=05.04
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00F4 USB Mobile Broadband
S: SerialNumber=d095087d
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Slark Xiao <[email protected]>
[ johan: sort entries ]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -439,6 +439,8 @@ static void option_instat_callback(struc
#define CINTERION_PRODUCT_MV31_2_RMNET 0x00b9
#define CINTERION_PRODUCT_MV32_WA 0x00f1
#define CINTERION_PRODUCT_MV32_WB 0x00f2
+#define CINTERION_PRODUCT_MV32_WA_RMNET 0x00f3
+#define CINTERION_PRODUCT_MV32_WB_RMNET 0x00f4
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -2001,8 +2003,12 @@ static const struct usb_device_id option
.driver_info = RSVD(0)},
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
.driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff),
+ .driver_info = RSVD(0) },
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
.driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff),
+ .driver_info = RSVD(0) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
.driver_info = RSVD(4) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
From: Hans de Goede <[email protected]>
[ Upstream commit 2986c51540ed50ac654ffb5a772e546c02628c91 ]
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with
the Android BIOS and it is causing problems with the Windows BIOS version.
Specifically when trying to register the already present touchscreen
x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks
the working of the touchscreen and also leads to an oops:
[ 14.248946] ------------[ cut here ]------------
[ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00'
[ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry
...
[ 14.249293] unregister_irq_proc+0xe0/0x100
[ 14.249305] free_desc+0x29/0x70
[ 14.249312] irq_free_descs+0x4b/0x80
[ 14.249320] mp_unmap_irq+0x5c/0x60
[ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40
[ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets]
[ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets]
Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS
is in use and exits with -ENODEV in that case, fixing this.
Fixes: 84c2dcdd475f ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/x86-android-tablets.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/platform/x86/x86-android-tablets.c b/drivers/platform/x86/x86-android-tablets.c
index 4803759774358..4acd6fa8d43b8 100644
--- a/drivers/platform/x86/x86-android-tablets.c
+++ b/drivers/platform/x86/x86-android-tablets.c
@@ -663,9 +663,23 @@ static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = {
},
};
+static int __init chuwi_hi8_init(void)
+{
+ /*
+ * Avoid the acpi_unregister_gsi() call in x86_acpi_irq_helper_get()
+ * breaking the touchscreen + logging various errors when the Windows
+ * BIOS is used.
+ */
+ if (acpi_dev_present("MSSL0001", NULL, 1))
+ return -ENODEV;
+
+ return 0;
+}
+
static const struct x86_dev_info chuwi_hi8_info __initconst = {
.i2c_client_info = chuwi_hi8_i2c_clients,
.i2c_client_count = ARRAY_SIZE(chuwi_hi8_i2c_clients),
+ .init = chuwi_hi8_init,
};
#define CZC_EC_EXTRA_PORT 0x68
--
2.35.1
From: Sander Vanheule <[email protected]>
[ Upstream commit ee0175b3b44288c74d5292c2a9c2c154f6c0317e ]
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
on MIPS, the IMR can end up containing garbage. This then results in
interrupt triggers for lines that don't have an interrupt handler
associated. The irq_desc lookup fails, and the ISR will not be cleared,
keeping the CPU busy until reboot, or until another IMR operation
restores the correct value. This situation appears to happen very
rarely, for < 0.5% of IMR writes.
Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
mapped peripheral registers, switch to using 32-bit I/O only, operating
on the entire bank for all single bit line settings. For 2-bit line
settings, with 16-bit port values, stick to manual (un)packing.
This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
Reported-by: Luiz Angelo Daros de Luca <[email protected]> # DGS-1210-52
Reported-by: Birger Koblitz <[email protected]> # GS728TP
Reported-by: Jan Hoffmann <[email protected]> # 1920-16G
Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
Signed-off-by: Sander Vanheule <[email protected]>
Cc: Paul Cercueil <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++---------------
1 file changed, 85 insertions(+), 81 deletions(-)
diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
index 63dcf42f7c206..d6418f89d3f63 100644
--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -46,10 +46,20 @@
* @lock: Lock for accessing the IRQ registers and values
* @intr_mask: Mask for interrupts lines
* @intr_type: Interrupt type selection
+ * @bank_read: Read a bank setting as a single 32-bit value
+ * @bank_write: Write a bank setting as a single 32-bit value
+ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
+ *
+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
+ * a value from (to) these registers. The IMR register consists of four 16-bit
+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
+ * 32 overflow into the second register.
*
* Because the interrupt mask register (IMR) combines the function of IRQ type
* selection and masking, two extra values are stored. @intr_mask is used to
- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
* the selected interrupt types. The logical AND of these values is written to
* IMR on changes.
*/
@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl {
void __iomem *cpumask_base;
struct cpumask cpu_irq_maskable;
raw_spinlock_t lock;
- u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
- u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
- unsigned int (*port_offset_u8)(unsigned int port);
- unsigned int (*port_offset_u16)(unsigned int port);
+ u8 intr_mask[REALTEK_GPIO_MAX];
+ u8 intr_type[REALTEK_GPIO_MAX];
+ u32 (*bank_read)(void __iomem *reg);
+ void (*bank_write)(void __iomem *reg, u32 value);
+ unsigned int (*line_imr_pos)(unsigned int line);
};
/* Expand with more flags as devices with other quirks are added */
@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
* port. The two interrupt mask registers store two bits per GPIO, so use u16
* values.
*/
-static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
{
- return port;
+ return ioread32be(reg);
}
-static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
{
- return 2 * port;
+ iowrite32be(value, reg);
+}
+
+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
+{
+ unsigned int port_pin = line % 8;
+ unsigned int port = line / 8;
+
+ return 2 * (8 * (port ^ 1) + port_pin);
}
/*
@@ -119,66 +138,67 @@ static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
* per GPIO, so use u16 values. The first register contains ports 1 and 0, the
* second ports 3 and 2.
*/
-static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
+static u32 realtek_gpio_bank_read(void __iomem *reg)
{
- return 3 - port;
+ return ioread32(reg);
}
-static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
+static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
{
- return 2 * (port ^ 1);
+ iowrite32(value, reg);
}
-static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, u16 irq_type, u16 irq_mask)
+static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
{
- iowrite16(irq_type & irq_mask,
- ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
+ return 2 * line;
}
-static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, u8 mask)
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
{
- iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+ ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
}
-static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
{
- return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
+ return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
}
-/* Set the rising and falling edge mask bits for a GPIO port pin */
-static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
+/* Set the rising and falling edge mask bits for a GPIO pin */
+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
{
- return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
+ void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
+ unsigned int line_shift = ctrl->line_imr_pos(line);
+ unsigned int shift = line_shift % 32;
+ u32 irq_type = ctrl->intr_type[line];
+ u32 irq_mask = ctrl->intr_mask[line];
+ u32 reg_val;
+
+ reg += 4 * (line_shift / 32);
+ reg_val = ioread32(reg);
+ reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
+ reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
+ iowrite32(reg_val, reg);
}
static void realtek_gpio_irq_ack(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
irq_hw_number_t line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
- realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
+ realtek_gpio_clear_isr(ctrl, BIT(line));
}
static void realtek_gpio_irq_unmask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 m;
gpiochip_enable_irq(&ctrl->gc, line);
raw_spin_lock_irqsave(&ctrl->lock, flags);
- m = ctrl->intr_mask[port];
- m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- ctrl->intr_mask[port] = m;
- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
}
@@ -186,16 +206,11 @@ static void realtek_gpio_irq_mask(struct irq_data *data)
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 m;
raw_spin_lock_irqsave(&ctrl->lock, flags);
- m = ctrl->intr_mask[port];
- m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- ctrl->intr_mask[port] = m;
- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ ctrl->intr_mask[line] = 0;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
gpiochip_disable_irq(&ctrl->gc, line);
@@ -205,10 +220,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
unsigned long flags;
- u16 type, t;
+ u8 type;
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_FALLING:
@@ -227,11 +240,8 @@ static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_ty
irq_set_handler_locked(data, handle_edge_irq);
raw_spin_lock_irqsave(&ctrl->lock, flags);
- t = ctrl->intr_type[port];
- t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
- t |= realtek_gpio_imr_bits(port_pin, type);
- ctrl->intr_type[port] = t;
- realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
+ ctrl->intr_type[line] = type;
+ realtek_gpio_update_line_imr(ctrl, line);
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
return 0;
@@ -242,28 +252,21 @@ static void realtek_gpio_irq_handler(struct irq_desc *desc)
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
struct irq_chip *irq_chip = irq_desc_get_chip(desc);
- unsigned int lines_done;
- unsigned int port_pin_count;
unsigned long status;
int offset;
chained_irq_enter(irq_chip, desc);
- for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
- status = realtek_gpio_read_isr(ctrl, lines_done / 8);
- port_pin_count = min(gc->ngpio - lines_done, 8U);
- for_each_set_bit(offset, &status, port_pin_count)
- generic_handle_domain_irq(gc->irq.domain, offset + lines_done);
- }
+ status = realtek_gpio_read_isr(ctrl);
+ for_each_set_bit(offset, &status, gc->ngpio)
+ generic_handle_domain_irq(gc->irq.domain, offset);
chained_irq_exit(irq_chip, desc);
}
-static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
- unsigned int port, int cpu)
+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
{
- return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
- REALTEK_GPIO_PORTS_PER_BANK * cpu;
+ return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
}
static int realtek_gpio_irq_set_affinity(struct irq_data *data,
@@ -271,12 +274,10 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
{
struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
unsigned int line = irqd_to_hwirq(data);
- unsigned int port = line / 8;
- unsigned int port_pin = line % 8;
void __iomem *irq_cpu_mask;
unsigned long flags;
int cpu;
- u8 v;
+ u32 v;
if (!ctrl->cpumask_base)
return -ENXIO;
@@ -284,15 +285,15 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
raw_spin_lock_irqsave(&ctrl->lock, flags);
for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
- v = ioread8(irq_cpu_mask);
+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
+ v = ctrl->bank_read(irq_cpu_mask);
if (cpumask_test_cpu(cpu, dest))
- v |= BIT(port_pin);
+ v |= BIT(line);
else
- v &= ~BIT(port_pin);
+ v &= ~BIT(line);
- iowrite8(v, irq_cpu_mask);
+ ctrl->bank_write(irq_cpu_mask, v);
}
raw_spin_unlock_irqrestore(&ctrl->lock, flags);
@@ -305,16 +306,17 @@ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
static int realtek_gpio_irq_init(struct gpio_chip *gc)
{
struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
- unsigned int port;
+ u32 mask_all = GENMASK(gc->ngpio - 1, 0);
+ unsigned int line;
int cpu;
- for (port = 0; (port * 8) < gc->ngpio; port++) {
- realtek_gpio_write_imr(ctrl, port, 0, 0);
- realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+ for (line = 0; line < gc->ngpio; line++)
+ realtek_gpio_update_line_imr(ctrl, line);
- for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
- iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu));
- }
+ realtek_gpio_clear_isr(ctrl, mask_all);
+
+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable)
+ ctrl->bank_write(realtek_gpio_irq_cpu_mask(ctrl, cpu), mask_all);
return 0;
}
@@ -387,12 +389,14 @@ static int realtek_gpio_probe(struct platform_device *pdev)
if (dev_flags & GPIO_PORTS_REVERSED) {
bgpio_flags = 0;
- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
+ ctrl->bank_read = realtek_gpio_bank_read;
+ ctrl->bank_write = realtek_gpio_bank_write;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
} else {
bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
+ ctrl->bank_read = realtek_gpio_bank_read_swapped;
+ ctrl->bank_write = realtek_gpio_bank_write_swapped;
+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
}
err = bgpio_init(&ctrl->gc, dev, 4,
--
2.35.1
From: Carlos Llamas <[email protected]>
commit 1da52815d5f1b654c89044db0cdc6adce43da1f1 upstream.
Syzbot reported a couple issues introduced by commit 44e602b4e52f
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.
This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].
Sample of syzbot's crash report:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
syz-executor229[3755] cmdline: ./syz-executor2294415195
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
[...]
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5666 [inline]
lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
down_read+0x98/0x450 kernel/locking/rwsem.c:1499
mmap_read_lock include/linux/mmap_lock.h:117 [inline]
binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
==================================================================
Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.
[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9
Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: <[email protected]> # v5.15+
Cc: Liam R. Howlett <[email protected]>
Reported-by: [email protected]
Reported-by: [email protected]
Reviewed-by: Liam R. Howlett <[email protected]>
Acked-by: Todd Kjos <[email protected]>
Signed-off-by: Carlos Llamas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder_alloc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -322,7 +322,6 @@ static inline void binder_alloc_set_vma(
*/
if (vma) {
vm_start = vma->vm_start;
- alloc->vma_vm_mm = vma->vm_mm;
mmap_assert_write_locked(alloc->vma_vm_mm);
} else {
mmap_assert_locked(alloc->vma_vm_mm);
@@ -795,7 +794,6 @@ int binder_alloc_mmap_handler(struct bin
binder_insert_free_buffer(alloc, buffer);
alloc->free_async_space = alloc->buffer_size / 2;
binder_alloc_set_vma(alloc, vma);
- mmgrab(alloc->vma_vm_mm);
return 0;
@@ -1091,6 +1089,8 @@ static struct shrinker binder_shrinker =
void binder_alloc_init(struct binder_alloc *alloc)
{
alloc->pid = current->group_leader->pid;
+ alloc->vma_vm_mm = current->mm;
+ mmgrab(alloc->vma_vm_mm);
mutex_init(&alloc->mutex);
INIT_LIST_HEAD(&alloc->buffers);
}
From: Stefan Wahren <[email protected]>
[ Upstream commit bc163555603e4ae9c817675ad80d618a4cdbfa2d ]
The while loop in raspberrypi_discover_clocks() relies on the assumption
that the id of the last clock element is zero. Because this data comes
from the Videocore firmware and it doesn't guarantuee such a behavior
this could lead to out-of-bounds access. So fix this by providing
a sentinel element.
Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Link: https://github.com/raspberrypi/firmware/issues/1688
Suggested-by: Phil Elwell <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Florian Fainelli <[email protected]>
Reviewed-by: Ivan T. Ivanov <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-raspberrypi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 39d63c983d62c..e495f5f382ab9 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -344,8 +344,13 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
struct rpi_firmware_get_clocks_response *clks;
int ret;
+ /*
+ * The firmware doesn't guarantee that the last element of
+ * RPI_FIRMWARE_GET_CLOCKS is zeroed. So allocate an additional
+ * zero element as sentinel.
+ */
clks = devm_kcalloc(rpi->dev,
- RPI_FIRMWARE_NUM_CLK_ID, sizeof(*clks),
+ RPI_FIRMWARE_NUM_CLK_ID + 1, sizeof(*clks),
GFP_KERNEL);
if (!clks)
return -ENOMEM;
--
2.35.1
From: Tetsuo Handa <[email protected]>
commit 98e01215708b6d416345465c09dce2bd4868c67a upstream.
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().
Reported-by: syzbot <[email protected]>
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <[email protected]>
Suggested-by: Fabio M. De Francesco <[email protected]>
Co-developed-by: Hillf Danton <[email protected]>
Signed-off-by: Hillf Danton <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joystick/iforce/iforce-serio.c | 6 +++---
drivers/input/joystick/iforce/iforce-usb.c | 8 ++++----
drivers/input/joystick/iforce/iforce.h | 6 ++++++
3 files changed, 13 insertions(+), 7 deletions(-)
--- a/drivers/input/joystick/iforce/iforce-serio.c
+++ b/drivers/input/joystick/iforce/iforce-serio.c
@@ -39,7 +39,7 @@ static void iforce_serio_xmit(struct ifo
again:
if (iforce->xmit.head == iforce->xmit.tail) {
- clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+ iforce_clear_xmit_and_wake(iforce);
spin_unlock_irqrestore(&iforce->xmit_lock, flags);
return;
}
@@ -64,7 +64,7 @@ again:
if (test_and_clear_bit(IFORCE_XMIT_AGAIN, iforce->xmit_flags))
goto again;
- clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+ iforce_clear_xmit_and_wake(iforce);
spin_unlock_irqrestore(&iforce->xmit_lock, flags);
}
@@ -169,7 +169,7 @@ static irqreturn_t iforce_serio_irq(stru
iforce_serio->cmd_response_len = iforce_serio->len;
/* Signal that command is done */
- wake_up(&iforce->wait);
+ wake_up_all(&iforce->wait);
} else if (likely(iforce->type)) {
iforce_process_packet(iforce, iforce_serio->id,
iforce_serio->data_in,
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -30,7 +30,7 @@ static void __iforce_usb_xmit(struct ifo
spin_lock_irqsave(&iforce->xmit_lock, flags);
if (iforce->xmit.head == iforce->xmit.tail) {
- clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+ iforce_clear_xmit_and_wake(iforce);
spin_unlock_irqrestore(&iforce->xmit_lock, flags);
return;
}
@@ -58,9 +58,9 @@ static void __iforce_usb_xmit(struct ifo
XMIT_INC(iforce->xmit.tail, n);
if ( (n=usb_submit_urb(iforce_usb->out, GFP_ATOMIC)) ) {
- clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
dev_warn(&iforce_usb->intf->dev,
"usb_submit_urb failed %d\n", n);
+ iforce_clear_xmit_and_wake(iforce);
}
/* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended.
@@ -175,15 +175,15 @@ static void iforce_usb_out(struct urb *u
struct iforce *iforce = &iforce_usb->iforce;
if (urb->status) {
- clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
dev_dbg(&iforce_usb->intf->dev, "urb->status %d, exiting\n",
urb->status);
+ iforce_clear_xmit_and_wake(iforce);
return;
}
__iforce_usb_xmit(iforce);
- wake_up(&iforce->wait);
+ wake_up_all(&iforce->wait);
}
static int iforce_usb_probe(struct usb_interface *intf,
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -119,6 +119,12 @@ static inline int iforce_get_id_packet(s
response_data, response_len);
}
+static inline void iforce_clear_xmit_and_wake(struct iforce *iforce)
+{
+ clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
+ wake_up_all(&iforce->wait);
+}
+
/* Public functions */
/* iforce-main.c */
int iforce_init_device(struct device *parent, u16 bustype,
From: Pu Lehui <[email protected]>
[ Upstream commit 7d6620f107bae6ed687ff07668e8e8f855487aa9 ]
Syzkaller reported a triggered kernel BUG as follows:
------------[ cut here ]------------
kernel BUG at kernel/bpf/cgroup.c:925!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0
Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84
28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48
8b 0c5
RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578
RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000
R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00
FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0
Call Trace:
<TASK>
cgroup_bpf_prog_detach+0xcc/0x100
__sys_bpf+0x2273/0x2a00
__x64_sys_bpf+0x17/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f68214dbcb9
Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff8
RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9
RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009
RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003
R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20
R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Repetition steps:
For the following cgroup tree,
root
|
cg1
|
cg2
1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs
attach type is NONE or OVERRIDE.
2. write 1 to /proc/thread-self/fail-nth for failslab.
3. detach prog1 for cg1, and then kernel BUG occur.
Failslab injection will cause kmalloc fail and fall back to
purge_effective_progs. The problem is that cg2 have attached another prog,
so when go through cg2 layer, iteration will add pos to 1, and subsequent
operations will be skipped by the following condition, and cg will meet
NULL in the end.
`if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))`
The NULL cg means no link or prog match, this is as expected, and it's not
a bug. So here just skip the no match situation.
Fixes: 4c46091ee985 ("bpf: Fix KASAN use-after-free Read in compute_effective_progs")
Signed-off-by: Pu Lehui <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/cgroup.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
index 7a394f7c205c4..34dfa45ef4f3b 100644
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -762,8 +762,10 @@ static void purge_effective_progs(struct cgroup *cgrp, struct bpf_prog *prog,
pos++;
}
}
+
+ /* no link or prog match, skip the cgroup of this layer */
+ continue;
found:
- BUG_ON(!cg);
progs = rcu_dereference_protected(
desc->bpf.effective[atype],
lockdep_is_held(&cgroup_mutex));
--
2.35.1
From: Lv Ruyi <[email protected]>
[ Upstream commit e79b548b7202bb3accdfe64f113129a4340bc2f9 ]
platform_get_irq() return negative value on failure, so null check of
priv->irq is incorrect. Fix it by comparing whether it is less than zero.
Fixes: a85e4c52086c ("peci: Add peci-aspeed controller driver")
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Lv Ruyi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Iwona Winiarska <[email protected]>
Signed-off-by: Iwona Winiarska <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/peci/controller/peci-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/peci/controller/peci-aspeed.c b/drivers/peci/controller/peci-aspeed.c
index 1925ddc13f002..731c5d8f75c66 100644
--- a/drivers/peci/controller/peci-aspeed.c
+++ b/drivers/peci/controller/peci-aspeed.c
@@ -523,7 +523,7 @@ static int aspeed_peci_probe(struct platform_device *pdev)
return PTR_ERR(priv->base);
priv->irq = platform_get_irq(pdev, 0);
- if (!priv->irq)
+ if (priv->irq < 0)
return priv->irq;
ret = devm_request_irq(&pdev->dev, priv->irq, aspeed_peci_irq_handler,
--
2.35.1
From: Armin Wolf <[email protected]>
[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ]
The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.
Example kernel oops:
[ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[ 807.987369] Mem abort info:
[ 807.987398] ESR = 0x96000005
[ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits
[ 807.987477] SET = 0, FnV = 0
[ 807.987507] EA = 0, S1PTW = 0
[ 807.987536] FSC = 0x05: level 1 translation fault
[ 807.987570] Data abort info:
[ 807.987763] ISV = 0, ISS = 0x00000005
[ 807.987801] CM = 0, WnR = 0
[ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575
[ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[ 807.988691] sp : ffffffc008cf3bd0
[ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[ 807.989084] Call trace:
[ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[ 807.989199] cur_state_store+0x84/0xd0
[ 807.989221] dev_attr_store+0x20/0x38
[ 807.989262] sysfs_kf_write+0x4c/0x60
[ 807.989282] kernfs_fop_write_iter+0x130/0x1c0
[ 807.989298] new_sync_write+0x10c/0x190
[ 807.989315] vfs_write+0x254/0x378
[ 807.989362] ksys_write+0x70/0xf8
[ 807.989379] __arm64_sys_write+0x24/0x30
[ 807.989424] invoke_syscall+0x4c/0x110
[ 807.989442] el0_svc_common.constprop.3+0xfc/0x120
[ 807.989458] do_el0_svc+0x2c/0x90
[ 807.989473] el0_svc+0x24/0x60
[ 807.989544] el0t_64_sync_handler+0x90/0xb8
[ 807.989558] el0t_64_sync+0x1a0/0x1a4
[ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[ 807.989627] ---[ end trace 8ded4c918658445b ]---
Fix this by checking the cooling state and return an error if it
exceeds the maximum cooling state.
Tested on a Raspberry Pi 3.
Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/gpio-fan.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index befe989ca7b94..fbf3f5a4ecb67 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -391,6 +391,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
if (!fan_data)
return -EINVAL;
+ if (state >= fan_data->num_speed)
+ return -EINVAL;
+
set_fan_speed(fan_data, state);
return 0;
}
--
2.35.1
From: Eyal Birger <[email protected]>
[ Upstream commit 7ec9fce4b31604f8415136a4c07f7dc8ad431aec ]
Commit 451ef36bd229 ("ip_tunnels: Add new flow flags field to ip_tunnel_key")
added a "flow_flags" member to struct ip_tunnel_key which was later used by
the commit in the fixes tag to avoid dropping packets with sources that
aren't locally configured when set in bpf_set_tunnel_key().
VXLAN and GENEVE were made to respect this flag, ip tunnels like IPIP and GRE
were not.
This commit fixes this omission by making ip_tunnel_init_flow() receive
the flow flags from the tunnel key in the relevant collect_md paths.
Fixes: b8fff748521c ("bpf: Set flow flag to allow any source IP in bpf_tunnel_key")
Signed-off-by: Eyal Birger <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Paul Chaignon <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c | 3 ++-
include/net/ip_tunnels.h | 4 +++-
net/ipv4/ip_gre.c | 2 +-
net/ipv4/ip_tunnel.c | 7 ++++---
4 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
index fe663b0ab7086..68d87e61bdc05 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
@@ -423,7 +423,8 @@ mlxsw_sp_span_gretap4_route(const struct net_device *to_dev,
parms = mlxsw_sp_ipip_netdev_parms4(to_dev);
ip_tunnel_init_flow(&fl4, parms.iph.protocol, *daddrp, *saddrp,
- 0, 0, dev_net(to_dev), parms.link, tun->fwmark, 0);
+ 0, 0, dev_net(to_dev), parms.link, tun->fwmark, 0,
+ 0);
rt = ip_route_output_key(tun->net, &fl4);
if (IS_ERR(rt))
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index 20f60d9da7418..cf1f22c01ed3d 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -246,7 +246,8 @@ static inline void ip_tunnel_init_flow(struct flowi4 *fl4,
__be32 daddr, __be32 saddr,
__be32 key, __u8 tos,
struct net *net, int oif,
- __u32 mark, __u32 tun_inner_hash)
+ __u32 mark, __u32 tun_inner_hash,
+ __u8 flow_flags)
{
memset(fl4, 0, sizeof(*fl4));
@@ -263,6 +264,7 @@ static inline void ip_tunnel_init_flow(struct flowi4 *fl4,
fl4->fl4_gre_key = key;
fl4->flowi4_mark = mark;
fl4->flowi4_multipath_hash = tun_inner_hash;
+ fl4->flowi4_flags = flow_flags;
}
int ip_tunnel_init(struct net_device *dev);
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 5c58e21f724e9..f866d6282b2b3 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -609,7 +609,7 @@ static int gre_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
ip_tunnel_init_flow(&fl4, IPPROTO_GRE, key->u.ipv4.dst, key->u.ipv4.src,
tunnel_id_to_key32(key->tun_id),
key->tos & ~INET_ECN_MASK, dev_net(dev), 0,
- skb->mark, skb_get_hash(skb));
+ skb->mark, skb_get_hash(skb), key->flow_flags);
rt = ip_route_output_key(dev_net(dev), &fl4);
if (IS_ERR(rt))
return PTR_ERR(rt);
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 94017a8c39945..1ad8809fc2e3b 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -295,7 +295,7 @@ static int ip_tunnel_bind_dev(struct net_device *dev)
ip_tunnel_init_flow(&fl4, iph->protocol, iph->daddr,
iph->saddr, tunnel->parms.o_key,
RT_TOS(iph->tos), dev_net(dev),
- tunnel->parms.link, tunnel->fwmark, 0);
+ tunnel->parms.link, tunnel->fwmark, 0, 0);
rt = ip_route_output_key(tunnel->net, &fl4);
if (!IS_ERR(rt)) {
@@ -570,7 +570,8 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
}
ip_tunnel_init_flow(&fl4, proto, key->u.ipv4.dst, key->u.ipv4.src,
tunnel_id_to_key32(key->tun_id), RT_TOS(tos),
- dev_net(dev), 0, skb->mark, skb_get_hash(skb));
+ dev_net(dev), 0, skb->mark, skb_get_hash(skb),
+ key->flow_flags);
if (tunnel->encap.type != TUNNEL_ENCAP_NONE)
goto tx_error;
@@ -728,7 +729,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
ip_tunnel_init_flow(&fl4, protocol, dst, tnl_params->saddr,
tunnel->parms.o_key, RT_TOS(tos),
dev_net(dev), tunnel->parms.link,
- tunnel->fwmark, skb_get_hash(skb));
+ tunnel->fwmark, skb_get_hash(skb), 0);
if (ip_tunnel_encap(skb, tunnel, &protocol, &fl4) < 0)
goto tx_error;
--
2.35.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 3ce9f2bef75528936c78a7053301f5725f622f3a ]
Commit 744d23c71af3 ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not
properly stopping and restarting the PHY during suspend/resume. Correct
that by indicating that the MAC is in charge of PHY PM operations and
ensure that all MDIO bus activity is quiescent during suspend.
Tested-by: Geert Uytterhoeven <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Fixes: 2aa70f864955 ("net: smsc911x: Quieten netif during suspend")
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/smsc/smsc911x.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 3bf20211cceb4..3829c2805b16c 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1037,6 +1037,8 @@ static int smsc911x_mii_probe(struct net_device *dev)
return ret;
}
+ /* Indicate that the MAC is responsible for managing PHY PM */
+ phydev->mac_managed_pm = true;
phy_attached_info(phydev);
phy_set_max_speed(phydev, SPEED_100);
@@ -2587,6 +2589,8 @@ static int smsc911x_suspend(struct device *dev)
if (netif_running(ndev)) {
netif_stop_queue(ndev);
netif_device_detach(ndev);
+ if (!device_may_wakeup(dev))
+ phy_stop(ndev->phydev);
}
/* enable wake on LAN, energy detection and the external PME
@@ -2628,6 +2632,8 @@ static int smsc911x_resume(struct device *dev)
if (netif_running(ndev)) {
netif_device_attach(ndev);
netif_start_queue(ndev);
+ if (!device_may_wakeup(dev))
+ phy_start(ndev->phydev);
}
return 0;
--
2.35.1
From: Johan Hovold <[email protected]>
commit d245f43aab2b61195d8ebb64cef7b5a08c590ab4 upstream.
The probe session-duplication overflow check incremented the session
count also when there were no more available sessions so that memory
beyond the fixed-size slab-allocated session array could be corrupted in
fastrpc_session_alloc() on open().
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: [email protected] # 5.1
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/fastrpc.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1948,7 +1948,7 @@ static int fastrpc_cb_probe(struct platf
spin_unlock_irqrestore(&cctx->lock, flags);
return -ENOSPC;
}
- sess = &cctx->session[cctx->sesscount];
+ sess = &cctx->session[cctx->sesscount++];
sess->used = false;
sess->valid = true;
sess->dev = dev;
@@ -1961,13 +1961,12 @@ static int fastrpc_cb_probe(struct platf
struct fastrpc_session_ctx *dup_sess;
for (i = 1; i < sessions; i++) {
- if (cctx->sesscount++ >= FASTRPC_MAX_SESSIONS)
+ if (cctx->sesscount >= FASTRPC_MAX_SESSIONS)
break;
- dup_sess = &cctx->session[cctx->sesscount];
+ dup_sess = &cctx->session[cctx->sesscount++];
memcpy(dup_sess, sess, sizeof(*dup_sess));
}
}
- cctx->sesscount++;
spin_unlock_irqrestore(&cctx->lock, flags);
rc = dma_set_mask(dev, DMA_BIT_MASK(32));
if (rc) {
From: Pawel Laszczak <[email protected]>
commit d5dcc33677d7415c5f23b3c052f9e80cbab9ea4e upstream.
The TRB_SMM flag indicates that DMA has completed the TD service with
this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for
bInterval > 1 each ISOC transfer contains more than one TD associated
with usb request (one TD per ITP). In such case the TRB_SMM flag will
be set in every TD and driver will recognize the end of transfer after
processing the first TD with TRB_SMM. In result driver stops updating
request->actual and returns incorrect actual length.
To fix this issue driver additionally must check TRB_CHAIN which is not
used for isochronous transfers.
Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly")
cc: <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Pawel Laszczak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/cdns3/cdns3-gadget.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -1530,7 +1530,8 @@ static void cdns3_transfer_completed(str
TRB_LEN(le32_to_cpu(trb->length));
if (priv_req->num_of_trb > 1 &&
- le32_to_cpu(trb->control) & TRB_SMM)
+ le32_to_cpu(trb->control) & TRB_SMM &&
+ le32_to_cpu(trb->control) & TRB_CHAIN)
transfer_end = true;
cdns3_ep_inc_deq(priv_ep);
From: David Thompson <[email protected]>
[ Upstream commit 3a1a274e933fca73fdc960cb1f60636cd285a265 ]
This patch adds logic to compute the MDIO period based on
the i1clk, and thereafter write the MDIO period into the YU
MDIO config register. The i1clk resource from the ACPI table
is used to provide addressing to YU bootrecord PLL registers.
The values in these registers are used to compute MDIO period.
If the i1clk resource is not present in the ACPI table, then
the current default hardcorded value of 430Mhz is used.
The i1clk clock value of 430MHz is only accurate for boards
with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs
have i1clk = 500MHz, but can support a slower MDIO period.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <[email protected]>
Signed-off-by: David Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige.h | 4 +-
.../mellanox/mlxbf_gige/mlxbf_gige_mdio.c | 122 +++++++++++++++---
.../mellanox/mlxbf_gige/mlxbf_gige_regs.h | 2 +
3 files changed, 110 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
index 5fdf9b7179f55..5a1027b072155 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
@@ -75,6 +75,7 @@ struct mlxbf_gige {
struct net_device *netdev;
struct platform_device *pdev;
void __iomem *mdio_io;
+ void __iomem *clk_io;
struct mii_bus *mdiobus;
spinlock_t lock; /* for packet processing indices */
u16 rx_q_entries;
@@ -137,7 +138,8 @@ enum mlxbf_gige_res {
MLXBF_GIGE_RES_MDIO9,
MLXBF_GIGE_RES_GPIO0,
MLXBF_GIGE_RES_LLU,
- MLXBF_GIGE_RES_PLU
+ MLXBF_GIGE_RES_PLU,
+ MLXBF_GIGE_RES_CLK
};
/* Version of register data returned by mlxbf_gige_get_regs() */
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c
index 2e6c1b7af0964..85155cd9405c5 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c
@@ -22,10 +22,23 @@
#include <linux/property.h>
#include "mlxbf_gige.h"
+#include "mlxbf_gige_regs.h"
#define MLXBF_GIGE_MDIO_GW_OFFSET 0x0
#define MLXBF_GIGE_MDIO_CFG_OFFSET 0x4
+#define MLXBF_GIGE_MDIO_FREQ_REFERENCE 156250000ULL
+#define MLXBF_GIGE_MDIO_COREPLL_CONST 16384ULL
+#define MLXBF_GIGE_MDC_CLK_NS 400
+#define MLXBF_GIGE_MDIO_PLL_I1CLK_REG1 0x4
+#define MLXBF_GIGE_MDIO_PLL_I1CLK_REG2 0x8
+#define MLXBF_GIGE_MDIO_CORE_F_SHIFT 0
+#define MLXBF_GIGE_MDIO_CORE_F_MASK GENMASK(25, 0)
+#define MLXBF_GIGE_MDIO_CORE_R_SHIFT 26
+#define MLXBF_GIGE_MDIO_CORE_R_MASK GENMASK(31, 26)
+#define MLXBF_GIGE_MDIO_CORE_OD_SHIFT 0
+#define MLXBF_GIGE_MDIO_CORE_OD_MASK GENMASK(3, 0)
+
/* Support clause 22 */
#define MLXBF_GIGE_MDIO_CL22_ST1 0x1
#define MLXBF_GIGE_MDIO_CL22_WRITE 0x1
@@ -50,27 +63,76 @@
#define MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK GENMASK(23, 16)
#define MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK GENMASK(31, 24)
+#define MLXBF_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \
+ FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \
+ FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \
+ FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \
+ FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13))
+
+#define MLXBF_GIGE_BF2_COREPLL_ADDR 0x02800c30
+#define MLXBF_GIGE_BF2_COREPLL_SIZE 0x0000000c
+
+static struct resource corepll_params[] = {
+ [MLXBF_GIGE_VERSION_BF2] = {
+ .start = MLXBF_GIGE_BF2_COREPLL_ADDR,
+ .end = MLXBF_GIGE_BF2_COREPLL_ADDR + MLXBF_GIGE_BF2_COREPLL_SIZE - 1,
+ .name = "COREPLL_RES"
+ },
+};
+
+/* Returns core clock i1clk in Hz */
+static u64 calculate_i1clk(struct mlxbf_gige *priv)
+{
+ u8 core_od, core_r;
+ u64 freq_output;
+ u32 reg1, reg2;
+ u32 core_f;
+
+ reg1 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG1);
+ reg2 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG2);
+
+ core_f = (reg1 & MLXBF_GIGE_MDIO_CORE_F_MASK) >>
+ MLXBF_GIGE_MDIO_CORE_F_SHIFT;
+ core_r = (reg1 & MLXBF_GIGE_MDIO_CORE_R_MASK) >>
+ MLXBF_GIGE_MDIO_CORE_R_SHIFT;
+ core_od = (reg2 & MLXBF_GIGE_MDIO_CORE_OD_MASK) >>
+ MLXBF_GIGE_MDIO_CORE_OD_SHIFT;
+
+ /* Compute PLL output frequency as follow:
+ *
+ * CORE_F / 16384
+ * freq_output = freq_reference * ----------------------------
+ * (CORE_R + 1) * (CORE_OD + 1)
+ */
+ freq_output = div_u64((MLXBF_GIGE_MDIO_FREQ_REFERENCE * core_f),
+ MLXBF_GIGE_MDIO_COREPLL_CONST);
+ freq_output = div_u64(freq_output, (core_r + 1) * (core_od + 1));
+
+ return freq_output;
+}
+
/* Formula for encoding the MDIO period. The encoded value is
* passed to the MDIO config register.
*
- * mdc_clk = 2*(val + 1)*i1clk
+ * mdc_clk = 2*(val + 1)*(core clock in sec)
*
- * 400 ns = 2*(val + 1)*(((1/430)*1000) ns)
+ * i1clk is in Hz:
+ * 400 ns = 2*(val + 1)*(1/i1clk)
*
- * val = (((400 * 430 / 1000) / 2) - 1)
+ * val = (((400/10^9) / (1/i1clk) / 2) - 1)
+ * val = (400/2 * i1clk)/10^9 - 1
*/
-#define MLXBF_GIGE_I1CLK_MHZ 430
-#define MLXBF_GIGE_MDC_CLK_NS 400
+static u8 mdio_period_map(struct mlxbf_gige *priv)
+{
+ u8 mdio_period;
+ u64 i1clk;
-#define MLXBF_GIGE_MDIO_PERIOD (((MLXBF_GIGE_MDC_CLK_NS * MLXBF_GIGE_I1CLK_MHZ / 1000) / 2) - 1)
+ i1clk = calculate_i1clk(priv);
-#define MLXBF_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \
- FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \
- FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \
- FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, \
- MLXBF_GIGE_MDIO_PERIOD) | \
- FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \
- FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13))
+ mdio_period = div_u64((MLXBF_GIGE_MDC_CLK_NS >> 1) * i1clk, 1000000000) - 1;
+
+ return mdio_period;
+}
static u32 mlxbf_gige_mdio_create_cmd(u16 data, int phy_add,
int phy_reg, u32 opcode)
@@ -124,9 +186,9 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
int phy_reg, u16 val)
{
struct mlxbf_gige *priv = bus->priv;
+ u32 temp;
u32 cmd;
int ret;
- u32 temp;
if (phy_reg & MII_ADDR_C45)
return -EOPNOTSUPP;
@@ -144,18 +206,44 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
return ret;
}
+static void mlxbf_gige_mdio_cfg(struct mlxbf_gige *priv)
+{
+ u8 mdio_period;
+ u32 val;
+
+ mdio_period = mdio_period_map(priv);
+
+ val = MLXBF_GIGE_MDIO_CFG_VAL;
+ val |= FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period);
+ writel(val, priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET);
+}
+
int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv)
{
struct device *dev = &pdev->dev;
+ struct resource *res;
int ret;
priv->mdio_io = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MDIO9);
if (IS_ERR(priv->mdio_io))
return PTR_ERR(priv->mdio_io);
- /* Configure mdio parameters */
- writel(MLXBF_GIGE_MDIO_CFG_VAL,
- priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET);
+ /* clk resource shared with other drivers so cannot use
+ * devm_platform_ioremap_resource
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_CLK);
+ if (!res) {
+ /* For backward compatibility with older ACPI tables, also keep
+ * CLK resource internal to the driver.
+ */
+ res = &corepll_params[MLXBF_GIGE_VERSION_BF2];
+ }
+
+ priv->clk_io = devm_ioremap(dev, res->start, resource_size(res));
+ if (IS_ERR(priv->clk_io))
+ return PTR_ERR(priv->clk_io);
+
+ mlxbf_gige_mdio_cfg(priv);
priv->mdiobus = devm_mdiobus_alloc(dev);
if (!priv->mdiobus) {
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
index 5fb33c9294bf9..7be3a793984d5 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
@@ -8,6 +8,8 @@
#ifndef __MLXBF_GIGE_REGS_H__
#define __MLXBF_GIGE_REGS_H__
+#define MLXBF_GIGE_VERSION 0x0000
+#define MLXBF_GIGE_VERSION_BF2 0x0
#define MLXBF_GIGE_STATUS 0x0010
#define MLXBF_GIGE_STATUS_READY BIT(0)
#define MLXBF_GIGE_INT_STATUS 0x0028
--
2.35.1
hallo Greg
5.19.8-rc1
compiles, boots and runs here on x86_64
(Intel i5-11400, Fedora 36)
Thanks
Tested-by: Ronald Warsow <[email protected]>
On Tue, 6 Sept 2022 at 19:13, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.19.8-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.19.y
* git commit: c0790038d4859e77589313023c61b0d7104e2d14
* git describe: v5.19.4-390-gc0790038d485
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.19.y/build/v5.19.4-390-gc0790038d485
## No test Regressions (compared to v5.19.4-234-gdd6b2254d7a7)
## No metric Regressions (compared to v5.19.4-234-gdd6b2254d7a7)
## No test Fixes (compared to v5.19.4-234-gdd6b2254d7a7)
## No metric Fixes (compared to v5.19.4-234-gdd6b2254d7a7)
## Test result summary
total: 103723, pass: 93459, fail: 693, skip: 9312, xfail: 259
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 333 total, 333 passed, 0 failed
* arm64: 65 total, 63 passed, 2 failed
* i386: 55 total, 53 passed, 2 failed
* mips: 56 total, 56 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 69 total, 63 passed, 6 failed
* riscv: 27 total, 22 passed, 5 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 58 total, 56 passed, 2 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
On 9/6/2022 6:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 9/6/22 07:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Tue, Sep 6, 2022 at 8:53 AM Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Hi Greg,
Compiled and booted on my test system Lenovo P50s: Intel Core i7
No emergency and critical messages in the dmesg
./perf bench sched all
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.808 [sec]
# Running sched/pipe benchmark...
# Executed 1000000 pipe operations between two processes
Total time: 9.461 [sec]
9.461262 usecs/op
105694 ops/sec
Tested-by: Zan Aziz <[email protected]>
Thanks
-Zan
On 9/6/22 6:29 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <[email protected]>
On Tue, Sep 06, 2022 at 03:29:08PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 150 pass: 150 fail: 0
Qemu test results:
total: 490 pass: 490 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hi Greg,
On Tue, Sep 06, 2022 at 03:29:08PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
Build test (gcc version 12.2.1 20220819):
mips: 59 configs -> no failure
arm: 99 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
csky allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]
[1]. https://openqa.qa.codethink.co.uk/tests/1781
[2]. https://openqa.qa.codethink.co.uk/tests/1786
[3]. https://openqa.qa.codethink.co.uk/tests/1788
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Tue, Sep 06, 2022 at 03:29:08PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.1.0).
Tested-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
On 06. 09. 22, 15:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.19.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.19.y
> and the diffstat can be found below.
openSUSE configs¹⁾ all green.
Tested-by: Jiri Slaby <[email protected]>
¹⁾ armv6hl armv7hl arm64 i386 ppc64 ppc64le riscv64 s390x x86_64
--
--
js
suse labs
On Tue, Sep 06, 2022 at 03:29:08PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.19.8 release.
> There are 155 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 08 Sep 2022 13:27:58 +0000.
> Anything received after that time might be too late.
Hi Greg,
5.19.8-rc1 tested.
Run tested on:
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)
In addition - build tested for:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- Allwinner H6
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos5422
Tested-by: Rudi Heitbaum <[email protected]>
--
Rudi
On 9/6/22 8:30 PM, Greg Kroah-Hartman wrote:
> From: Colin Ian King <[email protected]>
>
> [ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ]
>
> There is a spelling mistake in a gvt_vgpu_err error message. Fix it.
>
> Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
> Signed-off-by: Colin Ian King <[email protected]>
> Signed-off-by: Zhi Wang <[email protected]>
> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
> Reviewed-by: Zhi Wang <[email protected]>
> Signed-off-by: Zhenyu Wang <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
> index beea5895e4992..73e74a6a76037 100644
> --- a/drivers/gpu/drm/i915/gvt/handlers.c
> +++ b/drivers/gpu/drm/i915/gvt/handlers.c
> @@ -905,7 +905,7 @@ static int update_fdi_rx_iir_status(struct intel_vgpu *vgpu,
> else if (FDI_RX_IMR_TO_PIPE(offset) != INVALID_INDEX)
> index = FDI_RX_IMR_TO_PIPE(offset);
> else {
> - gvt_vgpu_err("Unsupport registers %x\n", offset);
> + gvt_vgpu_err("Unsupported registers %x\n", offset);
> return -EINVAL;
> }
I don't think this one is a stable material. How did this get picked up?
--
Ammar Faizi