Add support for eMMC card connected to main sdhci0 instance.
Signed-off-by: Apurva Nandan <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 7480f37e89e8..1622a01a4667 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -21,6 +21,7 @@ chosen {
aliases {
serial2 = &main_uart8;
+ mmc0 = &main_sdhci0;
mmc1 = &main_sdhci1;
i2c0 = &main_i2c0;
};
@@ -225,6 +226,14 @@ exp2: gpio@22 {
};
};
+&main_sdhci0 {
+ /* eMMC */
+ status = "okay";
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
&main_sdhci1 {
/* SD card */
status = "okay";
--
2.34.1
On 27/03/23 14:01, Apurva Nandan wrote:
> Add support for eMMC card connected to main sdhci0 instance.
>
> Signed-off-by: Apurva Nandan <[email protected]>
Reviewed-by: Bhavya Kapoor <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index 7480f37e89e8..1622a01a4667 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -21,6 +21,7 @@ chosen {
>
> aliases {
> serial2 = &main_uart8;
> + mmc0 = &main_sdhci0;
> mmc1 = &main_sdhci1;
> i2c0 = &main_i2c0;
> };
> @@ -225,6 +226,14 @@ exp2: gpio@22 {
> };
> };
>
> +&main_sdhci0 {
> + /* eMMC */
> + status = "okay";
> + non-removable;
> + ti,driver-strength-ohm = <50>;
> + disable-wp;
> +};
> +
> &main_sdhci1 {
> /* SD card */
> status = "okay";
> --
> 2.34.1
Looks correct to me.
On 11:50-20230330, Bhavya Kapoor wrote:
>
> On 27/03/23 14:01, Apurva Nandan wrote:
> > Add support for eMMC card connected to main sdhci0 instance.
> >
> > Signed-off-by: Apurva Nandan <[email protected]>
>
> Reviewed-by: Bhavya Kapoor <[email protected]>
>
> > ---
> > arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > index 7480f37e89e8..1622a01a4667 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > @@ -21,6 +21,7 @@ chosen {
> >
> > aliases {
> > serial2 = &main_uart8;
> > + mmc0 = &main_sdhci0;
> > mmc1 = &main_sdhci1;
> > i2c0 = &main_i2c0;
> > };
> > @@ -225,6 +226,14 @@ exp2: gpio@22 {
> > };
> > };
> >
> > +&main_sdhci0 {
> > + /* eMMC */
> > + status = "okay";
> > + non-removable;
> > + ti,driver-strength-ohm = <50>;
> > + disable-wp;
> > +};
> > +
> > &main_sdhci1 {
> > /* SD card */
> > status = "okay";
> > --
> > 2.34.1
> Looks correct to me.
Don't you need pinmux?
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
On 30/03/23 20:54, Nishanth Menon wrote:
> On 11:50-20230330, Bhavya Kapoor wrote:
>> On 27/03/23 14:01, Apurva Nandan wrote:
>>> Add support for eMMC card connected to main sdhci0 instance.
>>>
>>> Signed-off-by: Apurva Nandan <[email protected]>
>> Reviewed-by: Bhavya Kapoor <[email protected]>
>>
>>> ---
>>> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> index 7480f37e89e8..1622a01a4667 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> @@ -21,6 +21,7 @@ chosen {
>>>
>>> aliases {
>>> serial2 = &main_uart8;
>>> + mmc0 = &main_sdhci0;
>>> mmc1 = &main_sdhci1;
>>> i2c0 = &main_i2c0;
>>> };
>>> @@ -225,6 +226,14 @@ exp2: gpio@22 {
>>> };
>>> };
>>>
>>> +&main_sdhci0 {
>>> + /* eMMC */
>>> + status = "okay";
>>> + non-removable;
>>> + ti,driver-strength-ohm = <50>;
>>> + disable-wp;
>>> +};
>>> +
>>> &main_sdhci1 {
>>> /* SD card */
>>> status = "okay";
>>> --
>>> 2.34.1
>> Looks correct to me.
>
> Don't you need pinmux?
>
Hi Nishanth, pinmux is not needed since there is no mux options for emmc pins (mmc0) in datasheet.
-> Kindly refer to datasheet for same : https://www.ti.com/lit/ds/symlink/tda4vh-q1.pdf?ts=1680197698102&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTDA4VH-Q1%253FkeyMatch%253DTDA4VH%2BDATASHEET
Regards
~B-Kapoor
On 23:14-20230330, Bhavya Kapoor wrote:
>
> On 30/03/23 20:54, Nishanth Menon wrote:
> > On 11:50-20230330, Bhavya Kapoor wrote:
> >> On 27/03/23 14:01, Apurva Nandan wrote:
> >>> Add support for eMMC card connected to main sdhci0 instance.
> >>>
> >>> Signed-off-by: Apurva Nandan <[email protected]>
> >> Reviewed-by: Bhavya Kapoor <[email protected]>
> >>
> >>> ---
> >>> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 9 +++++++++
> >>> 1 file changed, 9 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> >>> index 7480f37e89e8..1622a01a4667 100644
> >>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> >>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> >>> @@ -21,6 +21,7 @@ chosen {
> >>>
> >>> aliases {
> >>> serial2 = &main_uart8;
> >>> + mmc0 = &main_sdhci0;
> >>> mmc1 = &main_sdhci1;
> >>> i2c0 = &main_i2c0;
> >>> };
> >>> @@ -225,6 +226,14 @@ exp2: gpio@22 {
> >>> };
> >>> };
> >>>
> >>> +&main_sdhci0 {
> >>> + /* eMMC */
> >>> + status = "okay";
> >>> + non-removable;
> >>> + ti,driver-strength-ohm = <50>;
> >>> + disable-wp;
> >>> +};
> >>> +
> >>> &main_sdhci1 {
> >>> /* SD card */
> >>> status = "okay";
> >>> --
> >>> 2.34.1
> >> Looks correct to me.
> >
> > Don't you need pinmux?
> >
> Hi Nishanth, pinmux is not needed since there is no mux options for emmc pins (mmc0) in datasheet.
>
> ?-> Kindly refer to datasheet for same : https://www.ti.com/lit/ds/symlink/tda4vh-q1.pdf?ts=1680197698102&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTDA4VH-Q1%253FkeyMatch%253DTDA4VH%2BDATASHEET
Aah, yes - thanks for clarifying.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Hi Apurva Nandan,
On Mon, 27 Mar 2023 14:01:00 +0530, Apurva Nandan wrote:
> Add support for eMMC card connected to main sdhci0 instance.
>
>
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support
commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D