VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.
Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.
Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support
arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.
No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c
Alexey Makhalov (6):
x86/vmware: Move common macros to vmware.h
x86/vmware: Introduce vmware_hypercall API
ptp/vmware: Use vmware_hypercall API
input/vmmouse: Use vmware_hypercall API
drm/vmwgfx: Use vmware_hypercall API
x86/vmware: Add TDX hypercall support
arch/x86/include/asm/vmware.h | 327 ++++++++++++++++++++--
arch/x86/kernel/cpu/vmware.c | 101 ++-----
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 ++++--------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++----
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 ------------
drivers/input/mouse/vmmouse.c | 76 ++---
drivers/ptp/ptp_vmw.c | 12 +-
7 files changed, 551 insertions(+), 520 deletions(-)
--
2.39.0
Move VMware hypercall macros to vmware.h as a preparation step
for the next commit. No functional changes besides exporting
vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 69 ++++++++++++++++++++++++++++++-----
arch/x86/kernel/cpu/vmware.c | 57 +++--------------------------
2 files changed, 66 insertions(+), 60 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..8cabf4a577bf 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,37 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
+ * number if the I/O port method is used.
*
* In short, new driver code should strictly use the new definition of
* %dx content.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
+
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +66,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..4db8e1daa4a1 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
-#define VMWARE_CMD_LEGACY_X2APIC 3
-#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
+#define VCPU_LEGACY_X2APIC 3
+#define VCPU_RESERVED 31
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
@@ -476,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
{
uint32_t eax, ebx, ecx, edx;
VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
- return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
- (eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+ return !(eax & BIT(VCPU_RESERVED)) &&
+ (eax & BIT(VCPU_LEGACY_X2APIC));
}
#ifdef CONFIG_AMD_MEM_ENCRYPT
--
2.39.0
Introducing vmware_hypercall family of functions as a common
implementation to be used by the VMware guest code and virtual
device drivers in arhitecture independent manner.
By analogy with KVM hypercall API, vmware_hypercallX and
vmware_hypercall_hb_{out,in} set of functions was added to
achieve that. Architecture specific implementation should be
hidden inside.
It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.
Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
when alternatives are not yet applied. This logic was inherited
from VMWARE_CMD from the commit mentioned above. Default
alternative code was optimized by size to reduse excessive nop
alignment once alternatives are applied. Total default code size
is 26 bytes, in worse case (3 bytes alternative) remaining 23
bytes will be aligned by only 3 long NOP instructions.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 262 ++++++++++++++++++++++++++--------
arch/x86/kernel/cpu/vmware.c | 35 ++---
2 files changed, 220 insertions(+), 77 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 8cabf4a577bf..17091eba68cb 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,69 +40,219 @@
extern u8 vmware_hypercall_mode;
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
- "inl (%%dx), %%eax", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
/*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of edx is presumed to have OUT bit
+ * set. The high word of edx may contain input data from the caller.
*/
-#define VMWARE_HYPERCALL_HB_OUT \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep outsb", \
+#define VMWARE_HYPERCALL \
+ ALTERNATIVE_3("cmpb $" \
+ __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
+ ", %[mode]\n\t" \
+ "jg 2f\n\t" \
+ "je 1f\n\t" \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax\n\t" \
+ "jmp 3f\n\t" \
+ "1: vmmcall\n\t" \
+ "jmp 3f\n\t" \
+ "2: vmcall\n\t" \
+ "3:\n\t", \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+ "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
/*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
*/
-#define VMWARE_HYPERCALL_HB_IN \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep insb", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep outsb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep insb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 4db8e1daa4a1..3aa1adaed18f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
- return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+ uint32_t eax, ebx, ecx;
+
+ eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+ return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
}
static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
}
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
{
- uint32_t result, info;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(result),
- "=c"(info) :
- "a"(VMWARE_HYPERVISOR_MAGIC),
- "b"(0),
- "c"(VMWARE_CMD_STEALCLOCK),
- "d"(0),
- "S"(arg1),
- "D"(arg2) :
- "memory");
- return result;
+ uint32_t info;
+
+ return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+ &info);
}
static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
static void __init vmware_platform_setup(void)
{
- uint32_t eax, ebx, ecx, edx;
+ uint32_t eax, ebx, ecx;
uint64_t lpj, tsc_khz;
- VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+ eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
if (ebx != UINT_MAX) {
lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
static bool __init vmware_legacy_x2apic_available(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+ uint32_t eax;
+
+ eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
return !(eax & BIT(VCPU_RESERVED)) &&
(eax & BIT(VCPU_LEGACY_X2APIC));
}
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/ptp/ptp_vmw.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 27c5547aa8a9..e5bb521b9b82 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -14,7 +14,6 @@
#include <asm/hypervisor.h>
#include <asm/vmware.h>
-#define VMWARE_MAGIC 0x564D5868
#define VMWARE_CMD_PCLK(nr) ((nr << 16) | 97)
#define VMWARE_CMD_PCLK_GETTIME VMWARE_CMD_PCLK(0)
@@ -24,15 +23,10 @@ static struct ptp_clock *ptp_vmw_clock;
static int ptp_vmw_pclk_read(u64 *ns)
{
- u32 ret, nsec_hi, nsec_lo, unused1, unused2, unused3;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
- "=S"(unused2), "=D"(unused3) :
- "a"(VMWARE_MAGIC), "b"(0),
- "c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
- "memory");
+ u32 ret, nsec_hi, nsec_lo;
+ ret = vmware_hypercall3(VMWARE_CMD_PCLK_GETTIME, 0,
+ &nsec_hi, &nsec_lo);
if (ret == 0)
*ns = ((u64)nsec_hi << 32) | nsec_lo;
return ret;
--
2.39.0
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 9 +++++
2 files changed, 81 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 17091eba68cb..cd58ff8ef1af 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,6 +40,54 @@
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ struct tdx_module_args args = {
+ .r10 = VMWARE_TDX_VENDOR_LEAF,
+ .r11 = VMWARE_TDX_HCALL_FUNC,
+ .r12 = VMWARE_HYPERVISOR_MAGIC,
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ vmware_tdx_hypercall_args(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return args.r12;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +115,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, NULL, NULL,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +137,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +160,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +183,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, NULL,
+ out2, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +209,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0, 0, NULL, out2,
+ out3, out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +234,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, out1,
+ out2, out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..0207e8ced92c 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,15 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/* __tdx_hypercall() is not exported. So, export the wrapper */
+void vmware_tdx_hypercall_args(struct tdx_module_args *args)
+{
+ __tdx_hypercall(args);
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/ptp/ptp_vmw.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 27c5547aa8a9..e5bb521b9b82 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -14,7 +14,6 @@
#include <asm/hypervisor.h>
#include <asm/vmware.h>
-#define VMWARE_MAGIC 0x564D5868
#define VMWARE_CMD_PCLK(nr) ((nr << 16) | 97)
#define VMWARE_CMD_PCLK_GETTIME VMWARE_CMD_PCLK(0)
@@ -24,15 +23,10 @@ static struct ptp_clock *ptp_vmw_clock;
static int ptp_vmw_pclk_read(u64 *ns)
{
- u32 ret, nsec_hi, nsec_lo, unused1, unused2, unused3;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
- "=S"(unused2), "=D"(unused3) :
- "a"(VMWARE_MAGIC), "b"(0),
- "c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
- "memory");
+ u32 ret, nsec_hi, nsec_lo;
+ ret = vmware_hypercall3(VMWARE_CMD_PCLK_GETTIME, 0,
+ &nsec_hi, &nsec_lo);
if (ret == 0)
*ns = ((u64)nsec_hi << 32) | nsec_lo;
return ret;
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/input/mouse/vmmouse.c | 76 ++++++++++-------------------------
1 file changed, 22 insertions(+), 54 deletions(-)
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
#include "psmouse.h"
#include "vmmouse.h"
-#define VMMOUSE_PROTO_MAGIC 0x564D5868U
-
/*
* Main commands supported by the vmmouse hypervisor port.
*/
-#define VMMOUSE_PROTO_CMD_GETVERSION 10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA 39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS 40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND 41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT 86
+#define VMWARE_CMD_ABSPOINTER_DATA 39
+#define VMWARE_CMD_ABSPOINTER_STATUS 40
+#define VMWARE_CMD_ABSPOINTER_COMMAND 41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT 86
/*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
*/
#define VMMOUSE_CMD_ENABLE 0x45414552U
#define VMMOUSE_CMD_DISABLE 0x000000f5U
@@ -76,28 +73,6 @@ struct vmmouse_data {
char dev_name[128];
};
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4) \
-({ \
- unsigned long __dummy1, __dummy2; \
- __asm__ __volatile__ (VMWARE_HYPERCALL : \
- "=a"(out1), \
- "=b"(out2), \
- "=c"(out3), \
- "=d"(out4), \
- "=S"(__dummy1), \
- "=D"(__dummy2) : \
- "a"(VMMOUSE_PROTO_MAGIC), \
- "b"(in1), \
- "c"(VMMOUSE_PROTO_CMD_##cmd), \
- "d"(0) : \
- "memory"); \
-})
-
/**
* vmmouse_report_button - report button state on the correct input device
*
@@ -145,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
struct input_dev *abs_dev = priv->abs_dev;
struct input_dev *pref_dev;
u32 status, x, y, z;
- u32 dummy1, dummy2, dummy3;
unsigned int queue_length;
unsigned int count = 255;
while (count--) {
/* See if we have motion data. */
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
psmouse_err(psmouse, "failed to fetch status data\n");
/*
@@ -172,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
}
/* Now get it */
- VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+ status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+ &x, &y, &z);
/*
* And report what we've got. Prefer to report button
@@ -247,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
static void vmmouse_disable(struct psmouse *psmouse)
{
u32 status;
- u32 dummy1, dummy2, dummy3, dummy4;
-
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
- dummy1, dummy2, dummy3, dummy4);
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
psmouse_warn(psmouse, "failed to disable vmmouse device\n");
}
@@ -271,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
static int vmmouse_enable(struct psmouse *psmouse)
{
u32 status, version;
- u32 dummy1, dummy2, dummy3, dummy4;
/*
* Try enabling the device. If successful, we should be able to
* read valid version ID back from it.
*/
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
/*
* See if version ID can be retrieved.
*/
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & 0x0000ffff) == 0) {
psmouse_dbg(psmouse, "empty flags - assuming no device\n");
return -ENXIO;
}
- VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
- version, dummy1, dummy2, dummy3);
+ version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+ 1 /* single item */);
if (version != VMMOUSE_VERSION_ID) {
psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
(unsigned) version, VMMOUSE_VERSION_ID);
@@ -301,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
/*
* Restrict ioport access, if possible.
*/
- VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+ VMMOUSE_RESTRICT_CPL0);
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+ VMMOUSE_CMD_REQUEST_ABSOLUTE);
return 0;
}
@@ -342,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
*/
int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
{
- u32 response, version, dummy1, dummy2;
+ u32 response, version, type;
if (!vmmouse_check_hypervisor()) {
psmouse_dbg(psmouse,
@@ -351,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
}
/* Check if the device is present */
- response = ~VMMOUSE_PROTO_MAGIC;
- VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
- if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+ response = ~VMWARE_HYPERVISOR_MAGIC;
+ version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+ if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
return -ENXIO;
if (set_properties) {
--
2.39.0
Introducing vmware_hypercall family of functions as a common
implementation to be used by the VMware guest code and virtual
device drivers in arhitecture independent manner.
By analogy with KVM hypercall API, vmware_hypercallX and
vmware_hypercall_hb_{out,in} set of functions was added to
achieve that. Architecture specific implementation should be
hidden inside.
It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.
Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
when alternatives are not yet applied. This logic was inherited
from VMWARE_CMD from the commit mentioned above. Default
alternative code was optimized by size to reduse excessive nop
alignment once alternatives are applied. Total default code size
is 26 bytes, in worse case (3 bytes alternative) remaining 23
bytes will be aligned by only 3 long NOP instructions.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 262 ++++++++++++++++++++++++++--------
arch/x86/kernel/cpu/vmware.c | 35 ++---
2 files changed, 220 insertions(+), 77 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 8cabf4a577bf..17091eba68cb 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,69 +40,219 @@
extern u8 vmware_hypercall_mode;
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
- "inl (%%dx), %%eax", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
/*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of edx is presumed to have OUT bit
+ * set. The high word of edx may contain input data from the caller.
*/
-#define VMWARE_HYPERCALL_HB_OUT \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep outsb", \
+#define VMWARE_HYPERCALL \
+ ALTERNATIVE_3("cmpb $" \
+ __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
+ ", %[mode]\n\t" \
+ "jg 2f\n\t" \
+ "je 1f\n\t" \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax\n\t" \
+ "jmp 3f\n\t" \
+ "1: vmmcall\n\t" \
+ "jmp 3f\n\t" \
+ "2: vmcall\n\t" \
+ "3:\n\t", \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+ "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
/*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
*/
-#define VMWARE_HYPERCALL_HB_IN \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep insb", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep outsb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep insb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 4db8e1daa4a1..3aa1adaed18f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
- return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+ uint32_t eax, ebx, ecx;
+
+ eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+ return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
}
static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
}
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
{
- uint32_t result, info;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(result),
- "=c"(info) :
- "a"(VMWARE_HYPERVISOR_MAGIC),
- "b"(0),
- "c"(VMWARE_CMD_STEALCLOCK),
- "d"(0),
- "S"(arg1),
- "D"(arg2) :
- "memory");
- return result;
+ uint32_t info;
+
+ return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+ &info);
}
static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
static void __init vmware_platform_setup(void)
{
- uint32_t eax, ebx, ecx, edx;
+ uint32_t eax, ebx, ecx;
uint64_t lpj, tsc_khz;
- VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+ eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
if (ebx != UINT_MAX) {
lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
static bool __init vmware_legacy_x2apic_available(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+ uint32_t eax;
+
+ eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
return !(eax & BIT(VCPU_RESERVED)) &&
(eax & BIT(VCPU_LEGACY_X2APIC));
}
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant of
vmware_hypercall here. To be moved to arch/arm64/include/asm/vmware.h
later.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 +++++++------------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 --------------------
3 files changed, 197 insertions(+), 358 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
#define RETRIES 3
-#define VMW_HYPERVISOR_MAGIC 0x564D5868
-
#define VMW_PORT_CMD_MSG 30
#define VMW_PORT_CMD_HB_MSG 0
#define VMW_PORT_CMD_OPEN_CHANNEL (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
*/
static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+ u32 ecx, edx, esi, edi;
- VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
- (protocol | GUESTMSG_FLAG_COOKIE), si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+ (protocol | GUESTMSG_FLAG_COOKIE), 0,
+ &ecx, &edx, &esi, &edi);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
channel->channel_id = HIGH_WORD(edx);
- channel->cookie_high = si;
- channel->cookie_low = di;
+ channel->cookie_high = esi;
+ channel->cookie_low = edi;
return 0;
}
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
*/
static int vmw_close_channel(struct rpc_channel *channel)
{
- unsigned long eax, ebx, ecx, edx, si, di;
-
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
+ u32 ecx;
- VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
const char *msg, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx;
unsigned long msg_len = strlen(msg);
/* HB port can't access encrypted memory. */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_high;
- u32 channel_id = (channel->channel_id << 16);
-
- si = (uintptr_t) msg;
- di = channel->cookie_low;
-
- VMW_PORT_HB_OUT(
+ vmware_hypercall_hb_out(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- msg_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id |
- VMWARE_HYPERVISOR_OUT,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ msg_len,
+ channel->channel_id << 16,
+ (uintptr_t) msg, channel->cookie_low,
+ channel->cookie_high,
+ &ebx);
return ebx;
}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
memcpy(&word, msg, bytes);
msg_len -= bytes;
msg += bytes;
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
- word, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+
+ vmware_hypercall5(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_SENDPAYLOAD << 16),
+ word, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
}
return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
unsigned long reply_len, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx, edx;
/* HB port can't access encrypted memory */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_low;
- u32 channel_id = (channel->channel_id << 16);
-
- si = channel->cookie_high;
- di = (uintptr_t) reply;
-
- VMW_PORT_HB_IN(
+ vmware_hypercall_hb_in(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- reply_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ reply_len,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ (uintptr_t) reply, channel->cookie_low,
+ &ebx);
return ebx;
}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
while (reply_len) {
unsigned int bytes = min_t(unsigned long, reply_len, 4);
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_RECVPAYLOAD << 16),
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
*/
static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx;
size_t msg_len = strlen(msg);
int retries = 0;
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_SENDSIZE,
- msg_len, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+ msg_len, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
size_t *msg_len)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx, edx;
char *reply;
size_t reply_len;
int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSIZE,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
reply[reply_len] = '\0';
-
- /* Ack buffer */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
*/
static inline void hypervisor_ppn_reset_all(void)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
- 0, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
}
/**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
*/
static inline void hypervisor_ppn_add(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
}
/**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
*/
static inline void hypervisor_ppn_remove(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
}
#if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
#define VMWARE_HYPERVISOR_HB BIT(0)
#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
+
#define X86_IO_MAGIC 0x86
#define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
#define X86_IO_W7_IMM_SHIFT 5
#define X86_IO_W7_IMM_MASK (0xff << X86_IO_W7_IMM_SHIFT)
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
- register u64 x0 asm("x0") = magic;
- register u64 x1 asm("x1") = in_ebx;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
register u64 x2 asm("x2") = cmd;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
+ register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0)
+ : "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+ : "memory");
+
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_WITH |
X86_IO_W7_DIR |
(2 << X86_IO_W7_SIZE_SHIFT);
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2)
+ : "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ return x0;
}
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long bp, u32 w7dir,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
{
- register u64 x0 asm("x0") = magic;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4");
+ register u64 x5 asm("x5");
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+ : "r" (x1), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ *out3 = x3;
+ *out4 = x4;
+ *out5 = x5;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+ : "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out1 = x1;
+ *out2 = x2;
+ *out3 = x3;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, int dir)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
register u64 x1 asm("x1") = cmd;
- register u64 x2 asm("x2") = in_ecx;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
- register u64 x6 asm("x6") = bp;
+ register u64 x2 asm("x2") = in2;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x6 asm("x6") = in6;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_STR |
X86_IO_W7_WITH |
- w7dir;
-
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x6), "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
-}
+ dir;
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx, \
- si, di) \
- vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx, \
- &edx, &si, &di)
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1)
+ : "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+ "r" (x6), "r" (x7)
+ : "memory");
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- 0, &eax, &ebx, &ecx, &edx, &si, &di)
+ *out1 = x1;
+ return x0;
+}
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1,
+ X86_IO_W7_DIR);
+}
#endif
#endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,191 +37,6 @@
#include <asm/vmware.h>
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, \
- flags, magic, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile (VMWARE_HYPERCALL : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(in_ebx), \
- "c"(cmd), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di) : \
- "memory"); \
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp: [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-#endif /* defined(__i386__) */
-
#endif /* defined(__i386__) || defined(__x86_64__) */
#endif /* _VMWGFX_MSG_X86_H */
--
2.39.0
Move VMware hypercall macros to vmware.h as a preparation step
for the next commit. No functional changes besides exporting
vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 69 ++++++++++++++++++++++++++++++-----
arch/x86/kernel/cpu/vmware.c | 57 +++--------------------------
2 files changed, 66 insertions(+), 60 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..8cabf4a577bf 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,37 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
+ * number if the I/O port method is used.
*
* In short, new driver code should strictly use the new definition of
* %dx content.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
+
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +66,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..4db8e1daa4a1 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
-#define VMWARE_CMD_LEGACY_X2APIC 3
-#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
+#define VCPU_LEGACY_X2APIC 3
+#define VCPU_RESERVED 31
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
@@ -476,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
{
uint32_t eax, ebx, ecx, edx;
VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
- return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
- (eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+ return !(eax & BIT(VCPU_RESERVED)) &&
+ (eax & BIT(VCPU_LEGACY_X2APIC));
}
#ifdef CONFIG_AMD_MEM_ENCRYPT
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/input/mouse/vmmouse.c | 76 ++++++++++-------------------------
1 file changed, 22 insertions(+), 54 deletions(-)
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
#include "psmouse.h"
#include "vmmouse.h"
-#define VMMOUSE_PROTO_MAGIC 0x564D5868U
-
/*
* Main commands supported by the vmmouse hypervisor port.
*/
-#define VMMOUSE_PROTO_CMD_GETVERSION 10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA 39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS 40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND 41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT 86
+#define VMWARE_CMD_ABSPOINTER_DATA 39
+#define VMWARE_CMD_ABSPOINTER_STATUS 40
+#define VMWARE_CMD_ABSPOINTER_COMMAND 41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT 86
/*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
*/
#define VMMOUSE_CMD_ENABLE 0x45414552U
#define VMMOUSE_CMD_DISABLE 0x000000f5U
@@ -76,28 +73,6 @@ struct vmmouse_data {
char dev_name[128];
};
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4) \
-({ \
- unsigned long __dummy1, __dummy2; \
- __asm__ __volatile__ (VMWARE_HYPERCALL : \
- "=a"(out1), \
- "=b"(out2), \
- "=c"(out3), \
- "=d"(out4), \
- "=S"(__dummy1), \
- "=D"(__dummy2) : \
- "a"(VMMOUSE_PROTO_MAGIC), \
- "b"(in1), \
- "c"(VMMOUSE_PROTO_CMD_##cmd), \
- "d"(0) : \
- "memory"); \
-})
-
/**
* vmmouse_report_button - report button state on the correct input device
*
@@ -145,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
struct input_dev *abs_dev = priv->abs_dev;
struct input_dev *pref_dev;
u32 status, x, y, z;
- u32 dummy1, dummy2, dummy3;
unsigned int queue_length;
unsigned int count = 255;
while (count--) {
/* See if we have motion data. */
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
psmouse_err(psmouse, "failed to fetch status data\n");
/*
@@ -172,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
}
/* Now get it */
- VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+ status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+ &x, &y, &z);
/*
* And report what we've got. Prefer to report button
@@ -247,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
static void vmmouse_disable(struct psmouse *psmouse)
{
u32 status;
- u32 dummy1, dummy2, dummy3, dummy4;
-
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
- dummy1, dummy2, dummy3, dummy4);
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
psmouse_warn(psmouse, "failed to disable vmmouse device\n");
}
@@ -271,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
static int vmmouse_enable(struct psmouse *psmouse)
{
u32 status, version;
- u32 dummy1, dummy2, dummy3, dummy4;
/*
* Try enabling the device. If successful, we should be able to
* read valid version ID back from it.
*/
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
/*
* See if version ID can be retrieved.
*/
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & 0x0000ffff) == 0) {
psmouse_dbg(psmouse, "empty flags - assuming no device\n");
return -ENXIO;
}
- VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
- version, dummy1, dummy2, dummy3);
+ version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+ 1 /* single item */);
if (version != VMMOUSE_VERSION_ID) {
psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
(unsigned) version, VMMOUSE_VERSION_ID);
@@ -301,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
/*
* Restrict ioport access, if possible.
*/
- VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+ VMMOUSE_RESTRICT_CPL0);
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+ VMMOUSE_CMD_REQUEST_ABSOLUTE);
return 0;
}
@@ -342,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
*/
int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
{
- u32 response, version, dummy1, dummy2;
+ u32 response, version, type;
if (!vmmouse_check_hypervisor()) {
psmouse_dbg(psmouse,
@@ -351,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
}
/* Check if the device is present */
- response = ~VMMOUSE_PROTO_MAGIC;
- VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
- if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+ response = ~VMWARE_HYPERVISOR_MAGIC;
+ version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+ if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
return -ENXIO;
if (set_properties) {
--
2.39.0
VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.
Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.
Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support
arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.
No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c
Alexey Makhalov (6):
x86/vmware: Move common macros to vmware.h
x86/vmware: Introduce vmware_hypercall API
ptp/vmware: Use vmware_hypercall API
input/vmmouse: Use vmware_hypercall API
drm/vmwgfx: Use vmware_hypercall API
x86/vmware: Add TDX hypercall support
arch/x86/include/asm/vmware.h | 327 ++++++++++++++++++++--
arch/x86/kernel/cpu/vmware.c | 101 ++-----
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 ++++--------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++----
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 ------------
drivers/input/mouse/vmmouse.c | 76 ++---
drivers/ptp/ptp_vmw.c | 12 +-
7 files changed, 551 insertions(+), 520 deletions(-)
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant of
vmware_hypercall here. To be moved to arch/arm64/include/asm/vmware.h
later.
Signed-off-by: Alexey Makhalov <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 +++++++------------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 --------------------
3 files changed, 197 insertions(+), 358 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
#define RETRIES 3
-#define VMW_HYPERVISOR_MAGIC 0x564D5868
-
#define VMW_PORT_CMD_MSG 30
#define VMW_PORT_CMD_HB_MSG 0
#define VMW_PORT_CMD_OPEN_CHANNEL (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
*/
static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+ u32 ecx, edx, esi, edi;
- VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
- (protocol | GUESTMSG_FLAG_COOKIE), si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+ (protocol | GUESTMSG_FLAG_COOKIE), 0,
+ &ecx, &edx, &esi, &edi);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
channel->channel_id = HIGH_WORD(edx);
- channel->cookie_high = si;
- channel->cookie_low = di;
+ channel->cookie_high = esi;
+ channel->cookie_low = edi;
return 0;
}
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
*/
static int vmw_close_channel(struct rpc_channel *channel)
{
- unsigned long eax, ebx, ecx, edx, si, di;
-
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
+ u32 ecx;
- VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
const char *msg, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx;
unsigned long msg_len = strlen(msg);
/* HB port can't access encrypted memory. */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_high;
- u32 channel_id = (channel->channel_id << 16);
-
- si = (uintptr_t) msg;
- di = channel->cookie_low;
-
- VMW_PORT_HB_OUT(
+ vmware_hypercall_hb_out(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- msg_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id |
- VMWARE_HYPERVISOR_OUT,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ msg_len,
+ channel->channel_id << 16,
+ (uintptr_t) msg, channel->cookie_low,
+ channel->cookie_high,
+ &ebx);
return ebx;
}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
memcpy(&word, msg, bytes);
msg_len -= bytes;
msg += bytes;
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
- word, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+
+ vmware_hypercall5(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_SENDPAYLOAD << 16),
+ word, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
}
return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
unsigned long reply_len, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx, edx;
/* HB port can't access encrypted memory */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_low;
- u32 channel_id = (channel->channel_id << 16);
-
- si = channel->cookie_high;
- di = (uintptr_t) reply;
-
- VMW_PORT_HB_IN(
+ vmware_hypercall_hb_in(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- reply_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ reply_len,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ (uintptr_t) reply, channel->cookie_low,
+ &ebx);
return ebx;
}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
while (reply_len) {
unsigned int bytes = min_t(unsigned long, reply_len, 4);
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_RECVPAYLOAD << 16),
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
*/
static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx;
size_t msg_len = strlen(msg);
int retries = 0;
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_SENDSIZE,
- msg_len, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+ msg_len, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
size_t *msg_len)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx, edx;
char *reply;
size_t reply_len;
int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSIZE,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
reply[reply_len] = '\0';
-
- /* Ack buffer */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
*/
static inline void hypervisor_ppn_reset_all(void)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
- 0, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
}
/**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
*/
static inline void hypervisor_ppn_add(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
}
/**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
*/
static inline void hypervisor_ppn_remove(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
}
#if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
#define VMWARE_HYPERVISOR_HB BIT(0)
#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
+
#define X86_IO_MAGIC 0x86
#define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
#define X86_IO_W7_IMM_SHIFT 5
#define X86_IO_W7_IMM_MASK (0xff << X86_IO_W7_IMM_SHIFT)
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
- register u64 x0 asm("x0") = magic;
- register u64 x1 asm("x1") = in_ebx;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
register u64 x2 asm("x2") = cmd;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
+ register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0)
+ : "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+ : "memory");
+
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_WITH |
X86_IO_W7_DIR |
(2 << X86_IO_W7_SIZE_SHIFT);
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2)
+ : "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ return x0;
}
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long bp, u32 w7dir,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
{
- register u64 x0 asm("x0") = magic;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4");
+ register u64 x5 asm("x5");
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+ : "r" (x1), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ *out3 = x3;
+ *out4 = x4;
+ *out5 = x5;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+ : "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out1 = x1;
+ *out2 = x2;
+ *out3 = x3;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, int dir)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
register u64 x1 asm("x1") = cmd;
- register u64 x2 asm("x2") = in_ecx;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
- register u64 x6 asm("x6") = bp;
+ register u64 x2 asm("x2") = in2;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x6 asm("x6") = in6;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_STR |
X86_IO_W7_WITH |
- w7dir;
-
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x6), "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
-}
+ dir;
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx, \
- si, di) \
- vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx, \
- &edx, &si, &di)
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1)
+ : "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+ "r" (x6), "r" (x7)
+ : "memory");
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- 0, &eax, &ebx, &ecx, &edx, &si, &di)
+ *out1 = x1;
+ return x0;
+}
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1,
+ X86_IO_W7_DIR);
+}
#endif
#endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,191 +37,6 @@
#include <asm/vmware.h>
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, \
- flags, magic, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile (VMWARE_HYPERCALL : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(in_ebx), \
- "c"(cmd), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di) : \
- "memory"); \
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp: [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-#endif /* defined(__i386__) */
-
#endif /* defined(__i386__) || defined(__x86_64__) */
#endif /* _VMWGFX_MSG_X86_H */
--
2.39.0
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 9 +++++
2 files changed, 81 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 17091eba68cb..cd58ff8ef1af 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,6 +40,54 @@
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ struct tdx_module_args args = {
+ .r10 = VMWARE_TDX_VENDOR_LEAF,
+ .r11 = VMWARE_TDX_HCALL_FUNC,
+ .r12 = VMWARE_HYPERVISOR_MAGIC,
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ vmware_tdx_hypercall_args(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return args.r12;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +115,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, NULL, NULL,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +137,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +160,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +183,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, NULL,
+ out2, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +209,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0, 0, NULL, out2,
+ out3, out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +234,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, out1,
+ out2, out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..0207e8ced92c 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,15 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/* __tdx_hypercall() is not exported. So, export the wrapper */
+void vmware_tdx_hypercall_args(struct tdx_module_args *args)
+{
+ __tdx_hypercall(args);
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
On Wed, Nov 22, 2023 at 03:30:49PM -0800, Alexey Makhalov wrote:
> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
> Eliminate arch specific code. No functional changes intended.
>
> Signed-off-by: Alexey Makhalov <[email protected]>
Hi Alexey,
it is not strictly related to this patch, but I notice than an x86_64
allmodconfig build with W=1 using gcc-13 fails to compile this file.
It appears that the problem relates to both priv->phys and
psmouse->ps2dev.serio->phys being 32 bytes.
drivers/input/mouse/vmmouse.c: In function ‘vmmouse_init’:
drivers/input/mouse/vmmouse.c:455:53: error: ‘/input1’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
| ^~~~~~~
drivers/input/mouse/vmmouse.c:455:9: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
456 | psmouse->ps2dev.serio->phys);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
On Nov 24, 2023, at 11:46 AM, Simon Horman <[email protected]> wrote:
>
> On Wed, Nov 22, 2023 at 03:30:49PM -0800, Alexey Makhalov wrote:
>> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
>> Eliminate arch specific code. No functional changes intended.
>>
>> Signed-off-by: Alexey Makhalov <[email protected]>
>
> Hi Alexey,
>
> it is not strictly related to this patch, but I notice than an x86_64
> allmodconfig build with W=1 using gcc-13 fails to compile this file.
>
> It appears that the problem relates to both priv->phys and
> psmouse->ps2dev.serio->phys being 32 bytes.
>
>
> drivers/input/mouse/vmmouse.c: In function ‘vmmouse_init’:
> drivers/input/mouse/vmmouse.c:455:53: error: ‘/input1’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
> 455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
> | ^~~~~~~
> drivers/input/mouse/vmmouse.c:455:9: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
> 455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> 456 | psmouse->ps2dev.serio->phys);
> | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> ...
Hi Simon, thanks for reporting the issue.
Zack, please take a look.
—Alexey
On Sat, Nov 25, 2023 at 01:22:58AM +0000, Alexey Makhalov wrote:
> On Nov 24, 2023, at 11:46 AM, Simon Horman <[email protected]> wrote:
> >
> > On Wed, Nov 22, 2023 at 03:30:49PM -0800, Alexey Makhalov wrote:
> >> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
> >> Eliminate arch specific code. No functional changes intended.
> >>
> >> Signed-off-by: Alexey Makhalov <[email protected]>
> >
> > Hi Alexey,
> >
> > it is not strictly related to this patch, but I notice than an x86_64
> > allmodconfig build with W=1 using gcc-13 fails to compile this file.
> >
> > It appears that the problem relates to both priv->phys and
> > psmouse->ps2dev.serio->phys being 32 bytes.
> >
> >
> > drivers/input/mouse/vmmouse.c: In function ‘vmmouse_init’:
> > drivers/input/mouse/vmmouse.c:455:53: error: ‘/input1’ directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
> > 455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
> > | ^~~~~~~
> > drivers/input/mouse/vmmouse.c:455:9: note: ‘snprintf’ output between 8 and 39 bytes into a destination of size 32
> > 455 | snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
> > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 456 | psmouse->ps2dev.serio->phys);
> > | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > ...
>
> Hi Simon, thanks for reporting the issue.
> Zack, please take a look.
We want the truncation behavior and we do not want GCC to make noise
about these, that is why "format-truncation" is explicitly disabled for
normal compiles. I guess we should exclude it even when we compile with
W=1 instead of doing pointless changes in the drivers.
Thanks.
--
Dmitry
On Wed, Nov 22, 2023 at 03:30:49PM -0800, Alexey Makhalov wrote:
> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
> Eliminate arch specific code. No functional changes intended.
>
> Signed-off-by: Alexey Makhalov <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Please feel free to merge with the rest of the series.
Thanks.
--
Dmitry
From: Alexey Makhalov <[email protected]>
VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.
Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.
Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support
arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.
No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c
v1->v2 changes (no functional changes):
- Improved commit message in patches 2 and 5.
- Added Reviewed-by for all patches.
- Added Ack from Dmitry Torokhov in patch 4. No fixes regarding reported
by Simon Horman gcc error in this patch.
x86 maintainers, please consider merging this patch set in your branch.
Alexey Makhalov (6):
x86/vmware: Move common macros to vmware.h
x86/vmware: Introduce vmware_hypercall API
ptp/vmware: Use vmware_hypercall API
input/vmmouse: Use vmware_hypercall API
drm/vmwgfx: Use vmware_hypercall API
x86/vmware: Add TDX hypercall support
arch/x86/include/asm/vmware.h | 327 ++++++++++++++++++++--
arch/x86/kernel/cpu/vmware.c | 101 ++-----
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 ++++--------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++----
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 ------------
drivers/input/mouse/vmmouse.c | 76 ++---
drivers/ptp/ptp_vmw.c | 12 +-
7 files changed, 551 insertions(+), 520 deletions(-)
--
2.39.0
Move VMware hypercall macros to vmware.h as a preparation step
for the next commit. No functional changes besides exporting
vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 69 ++++++++++++++++++++++++++++++-----
arch/x86/kernel/cpu/vmware.c | 57 +++--------------------------
2 files changed, 66 insertions(+), 60 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..8cabf4a577bf 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,37 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
+ * number if the I/O port method is used.
*
* In short, new driver code should strictly use the new definition of
* %dx content.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
+
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +66,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..4db8e1daa4a1 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
-#define VMWARE_CMD_LEGACY_X2APIC 3
-#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
+#define VCPU_LEGACY_X2APIC 3
+#define VCPU_RESERVED 31
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
@@ -476,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
{
uint32_t eax, ebx, ecx, edx;
VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
- return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
- (eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+ return !(eax & BIT(VCPU_RESERVED)) &&
+ (eax & BIT(VCPU_LEGACY_X2APIC));
}
#ifdef CONFIG_AMD_MEM_ENCRYPT
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
---
drivers/input/mouse/vmmouse.c | 76 ++++++++++-------------------------
1 file changed, 22 insertions(+), 54 deletions(-)
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
#include "psmouse.h"
#include "vmmouse.h"
-#define VMMOUSE_PROTO_MAGIC 0x564D5868U
-
/*
* Main commands supported by the vmmouse hypervisor port.
*/
-#define VMMOUSE_PROTO_CMD_GETVERSION 10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA 39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS 40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND 41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT 86
+#define VMWARE_CMD_ABSPOINTER_DATA 39
+#define VMWARE_CMD_ABSPOINTER_STATUS 40
+#define VMWARE_CMD_ABSPOINTER_COMMAND 41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT 86
/*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
*/
#define VMMOUSE_CMD_ENABLE 0x45414552U
#define VMMOUSE_CMD_DISABLE 0x000000f5U
@@ -76,28 +73,6 @@ struct vmmouse_data {
char dev_name[128];
};
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4) \
-({ \
- unsigned long __dummy1, __dummy2; \
- __asm__ __volatile__ (VMWARE_HYPERCALL : \
- "=a"(out1), \
- "=b"(out2), \
- "=c"(out3), \
- "=d"(out4), \
- "=S"(__dummy1), \
- "=D"(__dummy2) : \
- "a"(VMMOUSE_PROTO_MAGIC), \
- "b"(in1), \
- "c"(VMMOUSE_PROTO_CMD_##cmd), \
- "d"(0) : \
- "memory"); \
-})
-
/**
* vmmouse_report_button - report button state on the correct input device
*
@@ -145,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
struct input_dev *abs_dev = priv->abs_dev;
struct input_dev *pref_dev;
u32 status, x, y, z;
- u32 dummy1, dummy2, dummy3;
unsigned int queue_length;
unsigned int count = 255;
while (count--) {
/* See if we have motion data. */
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
psmouse_err(psmouse, "failed to fetch status data\n");
/*
@@ -172,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
}
/* Now get it */
- VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+ status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+ &x, &y, &z);
/*
* And report what we've got. Prefer to report button
@@ -247,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
static void vmmouse_disable(struct psmouse *psmouse)
{
u32 status;
- u32 dummy1, dummy2, dummy3, dummy4;
-
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
- dummy1, dummy2, dummy3, dummy4);
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
psmouse_warn(psmouse, "failed to disable vmmouse device\n");
}
@@ -271,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
static int vmmouse_enable(struct psmouse *psmouse)
{
u32 status, version;
- u32 dummy1, dummy2, dummy3, dummy4;
/*
* Try enabling the device. If successful, we should be able to
* read valid version ID back from it.
*/
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
/*
* See if version ID can be retrieved.
*/
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & 0x0000ffff) == 0) {
psmouse_dbg(psmouse, "empty flags - assuming no device\n");
return -ENXIO;
}
- VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
- version, dummy1, dummy2, dummy3);
+ version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+ 1 /* single item */);
if (version != VMMOUSE_VERSION_ID) {
psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
(unsigned) version, VMMOUSE_VERSION_ID);
@@ -301,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
/*
* Restrict ioport access, if possible.
*/
- VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+ VMMOUSE_RESTRICT_CPL0);
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+ VMMOUSE_CMD_REQUEST_ABSOLUTE);
return 0;
}
@@ -342,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
*/
int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
{
- u32 response, version, dummy1, dummy2;
+ u32 response, version, type;
if (!vmmouse_check_hypervisor()) {
psmouse_dbg(psmouse,
@@ -351,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
}
/* Check if the device is present */
- response = ~VMMOUSE_PROTO_MAGIC;
- VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
- if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+ response = ~VMWARE_HYPERVISOR_MAGIC;
+ version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+ if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
return -ENXIO;
if (set_properties) {
--
2.39.0
Introducing vmware_hypercall family of functions as a common
implementation to be used by the VMware guest code and virtual
device drivers in architecture independent manner.
By analogy with KVM hypercall API, vmware_hypercallX and
vmware_hypercall_hb_{out,in} set of functions was added to
achieve that. Architecture specific implementation should be
hidden inside.
It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.
Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
earlier during the boot when alternatives are not yet applied.
This logic was inherited from VMWARE_CMD from the commit mentioned
above. Default alternative code was optimized by size to reduce
excessive nop alignment once alternatives are applied. Total
default code size is 26 bytes, in worse case (3 bytes alternative)
remaining 23 bytes will be aligned by only 3 long NOP instructions.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Jeff Sipek <[email protected]>
---
arch/x86/include/asm/vmware.h | 262 ++++++++++++++++++++++++++--------
arch/x86/kernel/cpu/vmware.c | 35 ++---
2 files changed, 220 insertions(+), 77 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 8cabf4a577bf..17091eba68cb 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,69 +40,219 @@
extern u8 vmware_hypercall_mode;
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
- "inl (%%dx), %%eax", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
/*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of edx is presumed to have OUT bit
+ * set. The high word of edx may contain input data from the caller.
*/
-#define VMWARE_HYPERCALL_HB_OUT \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep outsb", \
+#define VMWARE_HYPERCALL \
+ ALTERNATIVE_3("cmpb $" \
+ __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
+ ", %[mode]\n\t" \
+ "jg 2f\n\t" \
+ "je 1f\n\t" \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax\n\t" \
+ "jmp 3f\n\t" \
+ "1: vmmcall\n\t" \
+ "jmp 3f\n\t" \
+ "2: vmcall\n\t" \
+ "3:\n\t", \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+ "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
/*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
*/
-#define VMWARE_HYPERCALL_HB_IN \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep insb", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep outsb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep insb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 4db8e1daa4a1..3aa1adaed18f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
- return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+ uint32_t eax, ebx, ecx;
+
+ eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+ return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
}
static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
}
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
{
- uint32_t result, info;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(result),
- "=c"(info) :
- "a"(VMWARE_HYPERVISOR_MAGIC),
- "b"(0),
- "c"(VMWARE_CMD_STEALCLOCK),
- "d"(0),
- "S"(arg1),
- "D"(arg2) :
- "memory");
- return result;
+ uint32_t info;
+
+ return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+ &info);
}
static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
static void __init vmware_platform_setup(void)
{
- uint32_t eax, ebx, ecx, edx;
+ uint32_t eax, ebx, ecx;
uint64_t lpj, tsc_khz;
- VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+ eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
if (ebx != UINT_MAX) {
lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
static bool __init vmware_legacy_x2apic_available(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+ uint32_t eax;
+
+ eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
return !(eax & BIT(VCPU_RESERVED)) &&
(eax & BIT(VCPU_LEGACY_X2APIC));
}
--
2.39.0
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 9 +++++
2 files changed, 81 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 17091eba68cb..cd58ff8ef1af 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,6 +40,54 @@
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ struct tdx_module_args args = {
+ .r10 = VMWARE_TDX_VENDOR_LEAF,
+ .r11 = VMWARE_TDX_HCALL_FUNC,
+ .r12 = VMWARE_HYPERVISOR_MAGIC,
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ vmware_tdx_hypercall_args(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return args.r12;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +115,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, NULL, NULL,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +137,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +160,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +183,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, NULL,
+ out2, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +209,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0, 0, NULL, out2,
+ out3, out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +234,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, out1,
+ out2, out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..0207e8ced92c 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,15 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/* __tdx_hypercall() is not exported. So, export the wrapper */
+void vmware_tdx_hypercall_args(struct tdx_module_args *args)
+{
+ __tdx_hypercall(args);
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
of vmware_hypercall here for now. The move of these functions to
arch/arm64/include/asm/vmware.h as well as removal of
drivers/gpu/drm/vmwgfx/vmwgfx_msg_{x86,arm64}.h header files will
be performed in the follow up patchset.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 +++++++------------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 --------------------
3 files changed, 197 insertions(+), 358 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
#define RETRIES 3
-#define VMW_HYPERVISOR_MAGIC 0x564D5868
-
#define VMW_PORT_CMD_MSG 30
#define VMW_PORT_CMD_HB_MSG 0
#define VMW_PORT_CMD_OPEN_CHANNEL (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
*/
static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+ u32 ecx, edx, esi, edi;
- VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
- (protocol | GUESTMSG_FLAG_COOKIE), si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+ (protocol | GUESTMSG_FLAG_COOKIE), 0,
+ &ecx, &edx, &esi, &edi);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
channel->channel_id = HIGH_WORD(edx);
- channel->cookie_high = si;
- channel->cookie_low = di;
+ channel->cookie_high = esi;
+ channel->cookie_low = edi;
return 0;
}
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
*/
static int vmw_close_channel(struct rpc_channel *channel)
{
- unsigned long eax, ebx, ecx, edx, si, di;
-
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
+ u32 ecx;
- VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
const char *msg, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx;
unsigned long msg_len = strlen(msg);
/* HB port can't access encrypted memory. */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_high;
- u32 channel_id = (channel->channel_id << 16);
-
- si = (uintptr_t) msg;
- di = channel->cookie_low;
-
- VMW_PORT_HB_OUT(
+ vmware_hypercall_hb_out(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- msg_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id |
- VMWARE_HYPERVISOR_OUT,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ msg_len,
+ channel->channel_id << 16,
+ (uintptr_t) msg, channel->cookie_low,
+ channel->cookie_high,
+ &ebx);
return ebx;
}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
memcpy(&word, msg, bytes);
msg_len -= bytes;
msg += bytes;
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
- word, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+
+ vmware_hypercall5(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_SENDPAYLOAD << 16),
+ word, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
}
return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
unsigned long reply_len, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx, edx;
/* HB port can't access encrypted memory */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_low;
- u32 channel_id = (channel->channel_id << 16);
-
- si = channel->cookie_high;
- di = (uintptr_t) reply;
-
- VMW_PORT_HB_IN(
+ vmware_hypercall_hb_in(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- reply_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ reply_len,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ (uintptr_t) reply, channel->cookie_low,
+ &ebx);
return ebx;
}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
while (reply_len) {
unsigned int bytes = min_t(unsigned long, reply_len, 4);
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_RECVPAYLOAD << 16),
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
*/
static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx;
size_t msg_len = strlen(msg);
int retries = 0;
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_SENDSIZE,
- msg_len, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+ msg_len, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
size_t *msg_len)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx, edx;
char *reply;
size_t reply_len;
int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSIZE,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
reply[reply_len] = '\0';
-
- /* Ack buffer */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
*/
static inline void hypervisor_ppn_reset_all(void)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
- 0, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
}
/**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
*/
static inline void hypervisor_ppn_add(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
}
/**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
*/
static inline void hypervisor_ppn_remove(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
}
#if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
#define VMWARE_HYPERVISOR_HB BIT(0)
#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
+
#define X86_IO_MAGIC 0x86
#define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
#define X86_IO_W7_IMM_SHIFT 5
#define X86_IO_W7_IMM_MASK (0xff << X86_IO_W7_IMM_SHIFT)
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
- register u64 x0 asm("x0") = magic;
- register u64 x1 asm("x1") = in_ebx;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
register u64 x2 asm("x2") = cmd;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
+ register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0)
+ : "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+ : "memory");
+
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_WITH |
X86_IO_W7_DIR |
(2 << X86_IO_W7_SIZE_SHIFT);
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2)
+ : "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ return x0;
}
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long bp, u32 w7dir,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
{
- register u64 x0 asm("x0") = magic;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4");
+ register u64 x5 asm("x5");
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+ : "r" (x1), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ *out3 = x3;
+ *out4 = x4;
+ *out5 = x5;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+ : "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out1 = x1;
+ *out2 = x2;
+ *out3 = x3;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, int dir)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
register u64 x1 asm("x1") = cmd;
- register u64 x2 asm("x2") = in_ecx;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
- register u64 x6 asm("x6") = bp;
+ register u64 x2 asm("x2") = in2;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x6 asm("x6") = in6;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_STR |
X86_IO_W7_WITH |
- w7dir;
-
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x6), "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
-}
+ dir;
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx, \
- si, di) \
- vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx, \
- &edx, &si, &di)
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1)
+ : "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+ "r" (x6), "r" (x7)
+ : "memory");
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- 0, &eax, &ebx, &ecx, &edx, &si, &di)
+ *out1 = x1;
+ return x0;
+}
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1,
+ X86_IO_W7_DIR);
+}
#endif
#endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,191 +37,6 @@
#include <asm/vmware.h>
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, \
- flags, magic, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile (VMWARE_HYPERCALL : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(in_ebx), \
- "c"(cmd), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di) : \
- "memory"); \
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp: [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-#endif /* defined(__i386__) */
-
#endif /* defined(__i386__) || defined(__x86_64__) */
#endif /* _VMWGFX_MSG_X86_H */
--
2.39.0
On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
> +#ifdef CONFIG_INTEL_TDX_GUEST
> +/* __tdx_hypercall() is not exported. So, export the wrapper */
> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
> +{
> + __tdx_hypercall(args);
> +}
> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
Uuuh, lovely. I'd like to see what the TDX folks think about this
export first.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Fri, Dec 01, 2023 at 03:24:47PM -0800, Alexey Makhalov wrote:
> Move VMware hypercall macros to vmware.h as a preparation step
> for the next commit. No functional changes besides exporting
"next commit" in git is ambiguous. Get rid of such formulations.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Fri, Dec 01, 2023 at 03:24:48PM -0800, Alexey Makhalov wrote:
> Introducing vmware_hypercall family of functions as a common
> implementation to be used by the VMware guest code and virtual
> device drivers in architecture independent manner.
>
> By analogy with KVM hypercall API, vmware_hypercallX and
> vmware_hypercall_hb_{out,in} set of functions was added to
> achieve that. Architecture specific implementation should be
> hidden inside.
Pls read section "2) Describe your changes" in
Documentation/process/submitting-patches.rst for more details on how to
formulate your commit messages.
Also, see section "Changelog" in Documentation/process/maintainer-tip.rst
More specifically:
"Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
to do frotz", as if you are giving orders to the codebase to change
its behaviour."
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
Hi Alexey,
kernel test robot noticed the following build errors:
[auto build test ERROR on drm-misc/drm-misc-next]
[also build test ERROR on dtor-input/next dtor-input/for-linus linus/master v6.7-rc4 next-20231205]
[cannot apply to tip/x86/vmware]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Alexey-Makhalov/x86-vmware-Move-common-macros-to-vmware-h/20231202-072821
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link: https://lore.kernel.org/r/20231201232452.220355-7-amakhalov%40vmware.com
patch subject: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
config: x86_64-buildonly-randconfig-003-20231203 (https://download.01.org/0day-ci/archive/20231206/[email protected]/config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231206/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All error/warnings (new ones prefixed by >>):
In file included from drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h:38,
from drivers/gpu/drm/vmwgfx/vmwgfx_msg.c:37:
>> arch/x86/include/asm/vmware.h:46:46: warning: 'struct tdx_module_args' declared inside parameter list will not be visible outside of this definition or declaration
46 | extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
| ^~~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h: In function 'vmware_tdx_hypercall':
>> arch/x86/include/asm/vmware.h:61:9: error: variable 'args' has initializer but incomplete type
61 | struct tdx_module_args args = {
| ^~~~~~~~~~~~~~~
>> arch/x86/include/asm/vmware.h:62:4: error: 'struct tdx_module_args' has no member named 'r10'
62 | .r10 = VMWARE_TDX_VENDOR_LEAF,
| ^~~
>> arch/x86/include/asm/vmware.h:43:32: warning: excess elements in struct initializer
43 | #define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
| ^~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h:62:10: note: in expansion of macro 'VMWARE_TDX_VENDOR_LEAF'
62 | .r10 = VMWARE_TDX_VENDOR_LEAF,
| ^~~~~~~~~~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h:43:32: note: (near initialization for 'args')
43 | #define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
| ^~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h:62:10: note: in expansion of macro 'VMWARE_TDX_VENDOR_LEAF'
62 | .r10 = VMWARE_TDX_VENDOR_LEAF,
| ^~~~~~~~~~~~~~~~~~~~~~
>> arch/x86/include/asm/vmware.h:63:4: error: 'struct tdx_module_args' has no member named 'r11'
63 | .r11 = VMWARE_TDX_HCALL_FUNC,
| ^~~
arch/x86/include/asm/vmware.h:44:32: warning: excess elements in struct initializer
44 | #define VMWARE_TDX_HCALL_FUNC 1
| ^
arch/x86/include/asm/vmware.h:63:10: note: in expansion of macro 'VMWARE_TDX_HCALL_FUNC'
63 | .r11 = VMWARE_TDX_HCALL_FUNC,
| ^~~~~~~~~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h:44:32: note: (near initialization for 'args')
44 | #define VMWARE_TDX_HCALL_FUNC 1
| ^
arch/x86/include/asm/vmware.h:63:10: note: in expansion of macro 'VMWARE_TDX_HCALL_FUNC'
63 | .r11 = VMWARE_TDX_HCALL_FUNC,
| ^~~~~~~~~~~~~~~~~~~~~
>> arch/x86/include/asm/vmware.h:64:4: error: 'struct tdx_module_args' has no member named 'r12'
64 | .r12 = VMWARE_HYPERVISOR_MAGIC,
| ^~~
arch/x86/include/asm/vmware.h:31:34: warning: excess elements in struct initializer
31 | #define VMWARE_HYPERVISOR_MAGIC 0x564D5868U
| ^~~~~~~~~~~
arch/x86/include/asm/vmware.h:64:10: note: in expansion of macro 'VMWARE_HYPERVISOR_MAGIC'
64 | .r12 = VMWARE_HYPERVISOR_MAGIC,
| ^~~~~~~~~~~~~~~~~~~~~~~
arch/x86/include/asm/vmware.h:31:34: note: (near initialization for 'args')
31 | #define VMWARE_HYPERVISOR_MAGIC 0x564D5868U
| ^~~~~~~~~~~
arch/x86/include/asm/vmware.h:64:10: note: in expansion of macro 'VMWARE_HYPERVISOR_MAGIC'
64 | .r12 = VMWARE_HYPERVISOR_MAGIC,
| ^~~~~~~~~~~~~~~~~~~~~~~
>> arch/x86/include/asm/vmware.h:65:4: error: 'struct tdx_module_args' has no member named 'r13'
65 | .r13 = cmd,
| ^~~
arch/x86/include/asm/vmware.h:65:10: warning: excess elements in struct initializer
65 | .r13 = cmd,
| ^~~
arch/x86/include/asm/vmware.h:65:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:66:4: error: 'struct tdx_module_args' has no member named 'rbx'
66 | .rbx = in1,
| ^~~
arch/x86/include/asm/vmware.h:66:10: warning: excess elements in struct initializer
66 | .rbx = in1,
| ^~~
arch/x86/include/asm/vmware.h:66:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:67:4: error: 'struct tdx_module_args' has no member named 'rdx'
67 | .rdx = in3,
| ^~~
arch/x86/include/asm/vmware.h:67:10: warning: excess elements in struct initializer
67 | .rdx = in3,
| ^~~
arch/x86/include/asm/vmware.h:67:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:68:4: error: 'struct tdx_module_args' has no member named 'rsi'
68 | .rsi = in4,
| ^~~
arch/x86/include/asm/vmware.h:68:10: warning: excess elements in struct initializer
68 | .rsi = in4,
| ^~~
arch/x86/include/asm/vmware.h:68:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:69:4: error: 'struct tdx_module_args' has no member named 'rdi'
69 | .rdi = in5,
| ^~~
arch/x86/include/asm/vmware.h:69:10: warning: excess elements in struct initializer
69 | .rdi = in5,
| ^~~
arch/x86/include/asm/vmware.h:69:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:70:4: error: 'struct tdx_module_args' has no member named 'r14'
70 | .r14 = in6,
| ^~~
arch/x86/include/asm/vmware.h:70:10: warning: excess elements in struct initializer
70 | .r14 = in6,
| ^~~
arch/x86/include/asm/vmware.h:70:10: note: (near initialization for 'args')
>> arch/x86/include/asm/vmware.h:61:25: error: storage size of 'args' isn't known
61 | struct tdx_module_args args = {
| ^~~~
>> arch/x86/include/asm/vmware.h:61:25: warning: unused variable 'args' [-Wunused-variable]
vim +/args +61 arch/x86/include/asm/vmware.h
42
> 43 #define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
44 #define VMWARE_TDX_HCALL_FUNC 1
45
> 46 extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
47
48 /*
49 * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
50 * rbp (arg6) is discouraged by the TDX specification. Therefore, we
51 * remap those registers to r12, r13 and r14, respectively.
52 */
53 static inline
54 unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
55 unsigned long in3, unsigned long in4,
56 unsigned long in5, unsigned long in6,
57 uint32_t *out1, uint32_t *out2,
58 uint32_t *out3, uint32_t *out4,
59 uint32_t *out5, uint32_t *out6)
60 {
> 61 struct tdx_module_args args = {
> 62 .r10 = VMWARE_TDX_VENDOR_LEAF,
> 63 .r11 = VMWARE_TDX_HCALL_FUNC,
> 64 .r12 = VMWARE_HYPERVISOR_MAGIC,
> 65 .r13 = cmd,
> 66 .rbx = in1,
> 67 .rdx = in3,
> 68 .rsi = in4,
> 69 .rdi = in5,
> 70 .r14 = in6,
71 };
72
73 vmware_tdx_hypercall_args(&args);
74
75 if (out1)
76 *out1 = args.rbx;
77 if (out2)
78 *out2 = args.r13;
79 if (out3)
80 *out3 = args.rdx;
81 if (out4)
82 *out4 = args.rsi;
83 if (out5)
84 *out5 = args.rdi;
85 if (out6)
86 *out6 = args.r14;
87
88 return args.r12;
89 }
90
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On Fri, Dec 01, 2023 at 03:24:51PM -0800, Alexey Makhalov wrote:
> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
> Eliminate arch specific code.
>
> drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
> of vmware_hypercall here for now. The move of these functions to
> arch/arm64/include/asm/vmware.h as well as removal of
> drivers/gpu/drm/vmwgfx/vmwgfx_msg_{x86,arm64}.h header files will
> be performed in the follow up patchset.
Same note as for patch 1 - no commit order in git.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
Hi Alexey,
kernel test robot noticed the following build errors:
[auto build test ERROR on drm-misc/drm-misc-next]
[also build test ERROR on dtor-input/next dtor-input/for-linus linus/master v6.7-rc4 next-20231205]
[cannot apply to tip/x86/vmware]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Alexey-Makhalov/x86-vmware-Move-common-macros-to-vmware-h/20231202-072821
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link: https://lore.kernel.org/r/20231201232452.220355-7-amakhalov%40vmware.com
patch subject: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
config: i386-buildonly-randconfig-005-20231202 (https://download.01.org/0day-ci/archive/20231206/[email protected]/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231206/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All error/warnings (new ones prefixed by >>):
In file included from drivers/gpu/drm/vmwgfx/vmwgfx_msg.c:37:
In file included from drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h:38:
>> arch/x86/include/asm/vmware.h:46:46: warning: declaration of 'struct tdx_module_args' will not be visible outside of this function [-Wvisibility]
extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
^
>> arch/x86/include/asm/vmware.h:61:25: error: variable has incomplete type 'struct tdx_module_args'
struct tdx_module_args args = {
^
arch/x86/include/asm/vmware.h:61:9: note: forward declaration of 'struct tdx_module_args'
struct tdx_module_args args = {
^
1 warning and 1 error generated.
vim +61 arch/x86/include/asm/vmware.h
45
> 46 extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
47
48 /*
49 * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
50 * rbp (arg6) is discouraged by the TDX specification. Therefore, we
51 * remap those registers to r12, r13 and r14, respectively.
52 */
53 static inline
54 unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
55 unsigned long in3, unsigned long in4,
56 unsigned long in5, unsigned long in6,
57 uint32_t *out1, uint32_t *out2,
58 uint32_t *out3, uint32_t *out4,
59 uint32_t *out5, uint32_t *out6)
60 {
> 61 struct tdx_module_args args = {
62 .r10 = VMWARE_TDX_VENDOR_LEAF,
63 .r11 = VMWARE_TDX_HCALL_FUNC,
64 .r12 = VMWARE_HYPERVISOR_MAGIC,
65 .r13 = cmd,
66 .rbx = in1,
67 .rdx = in3,
68 .rsi = in4,
69 .rdi = in5,
70 .r14 = in6,
71 };
72
73 vmware_tdx_hypercall_args(&args);
74
75 if (out1)
76 *out1 = args.rbx;
77 if (out2)
78 *out2 = args.r13;
79 if (out3)
80 *out3 = args.rdx;
81 if (out4)
82 *out4 = args.rsi;
83 if (out5)
84 *out5 = args.rdi;
85 if (out6)
86 *out6 = args.r14;
87
88 return args.r12;
89 }
90
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On 12/5/23 12:27 PM, Borislav Petkov wrote:
> On Fri, Dec 01, 2023 at 03:24:51PM -0800, Alexey Makhalov wrote:
>> Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
>> Eliminate arch specific code.
>>
>> drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
>> of vmware_hypercall here for now. The move of these functions to
>> arch/arm64/include/asm/vmware.h as well as removal of
>> drivers/gpu/drm/vmwgfx/vmwgfx_msg_{x86,arm64}.h header files will
>> be performed in the follow up patchset.
> Same note as for patch 1 - no commit order in git.
>
>
Thanks for the review Borislav. I'll address your comments regarding
description messages
in v3. It is going to be sent from @broadcom.com and may take some time
to align with
corporate legal stuff.
--Alexey
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
On 12/4/23 02:31, Borislav Petkov wrote:
> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
>> +#ifdef CONFIG_INTEL_TDX_GUEST
>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
>> +{
>> + __tdx_hypercall(args);
>> +}
>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
> Uuuh, lovely. I'd like to see what the TDX folks think about this
> export first.
I don't really like it much. This does a generic thing (make a TDX
hypercall) with a specific name ("vmware_"). If you want to make an
argument that a certain chunk of the __tdx_hypercall() space is just for
VMWare and you also add a VMWare-specific check and then export *that*,
it might be acceptable.
But I don't want random modules able to make random, unrestricted TDX
hypercalls. That's asking for trouble.
On 12/5/23 1:24 PM, Dave Hansen wrote:
> On 12/4/23 02:31, Borislav Petkov wrote:
>> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
>>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
>>> +{
>>> + __tdx_hypercall(args);
>>> +}
>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
>> Uuuh, lovely. I'd like to see what the TDX folks think about this
>> export first.
>
> I don't really like it much. This does a generic thing (make a TDX
> hypercall) with a specific name ("vmware_"). If you want to make an
> argument that a certain chunk of the __tdx_hypercall() space is just for
> VMWare and you also add a VMWare-specific check and then export *that*,
> it might be acceptable.
>
> But I don't want random modules able to make random, unrestricted TDX
> hypercalls. That's asking for trouble.
Considering exporting of __tdx_hypercall for random modules is not an
option, what VMware specific checks you are suggesting?
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
Hi Dave and Alexey,
Regarding VMware-specific checks, it may be beneficial to add some
additional checks
such as ensuring that the hypervisor vendor is VMware,
r12==VMWARE_HYPERVISOR_MAGIC,
r10==VMWARE_TDX_VENDOR_LEAF, r11==VMWARE_TDX_HCALL_FUNC and r13 (command) is
restricted to those few commands we expect to be invoked from the
kernel or drivers by VMware-specific
code.
If we add these checks, would folks be OK with exporting this function?
On Tue, Dec 5, 2023 at 3:41 PM Alexey Makhalov
<[email protected]> wrote:
>
>
>
> On 12/5/23 1:24 PM, Dave Hansen wrote:
> > On 12/4/23 02:31, Borislav Petkov wrote:
> >> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
> >>> +#ifdef CONFIG_INTEL_TDX_GUEST
> >>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
> >>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
> >>> +{
> >>> + __tdx_hypercall(args);
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
> >> Uuuh, lovely. I'd like to see what the TDX folks think about this
> >> export first.
> >
> > I don't really like it much. This does a generic thing (make a TDX
> > hypercall) with a specific name ("vmware_"). If you want to make an
> > argument that a certain chunk of the __tdx_hypercall() space is just for
> > VMWare and you also add a VMWare-specific check and then export *that*,
> > it might be acceptable.
> >
> > But I don't want random modules able to make random, unrestricted TDX
> > hypercalls. That's asking for trouble.
>
> Considering exporting of __tdx_hypercall for random modules is not an
> option, what VMware specific checks you are suggesting?
>
> --
> This electronic communication and the information and any files transmitted
> with it, or attached to it, are confidential and are intended solely for
> the use of the individual or entity to whom it is addressed and may contain
> information that is confidential, legally privileged, protected by privacy
> laws, or otherwise restricted from disclosure to anyone else. If you are
> not the intended recipient or the person responsible for delivering the
> e-mail to the intended recipient, you are hereby notified that any use,
> copying, distributing, dissemination, forwarding, printing, or copying of
> this e-mail is strictly prohibited. If you received this e-mail in error,
> please return the e-mail to the sender, delete it from your computer, and
> destroy any printed copy of it.
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
On 12/5/23 13:41, Alexey Makhalov wrote:
>> I don't really like it much. This does a generic thing (make a TDX
>> hypercall) with a specific name ("vmware_"). If you want to make an
>> argument that a certain chunk of the __tdx_hypercall() space is just for
>> VMWare and you also add a VMWare-specific check and then export *that*,
>> it might be acceptable.
>>
>> But I don't want random modules able to make random, unrestricted TDX
>> hypercalls. That's asking for trouble.
>
> Considering exporting of __tdx_hypercall for random modules is not an
> option, what VMware specific checks you are suggesting?
Make sure it can only be called running on VMWare guests. A check for
X86_HYPER_VMWARE seems simple enough.
Second, unless the space is *HUGE*, you want to be exporting things like
__vmware_platform() or vmware_legacy_x2apic_available(), *NOT* the
underlying hypercall functions.
We want to make sure that the interfaces are well defined and bounded.
On 12/5/23 3:03 PM, Dave Hansen wrote:
> On 12/5/23 13:41, Alexey Makhalov wrote:
>>> I don't really like it much. This does a generic thing (make a TDX
>>> hypercall) with a specific name ("vmware_"). If you want to make an
>>> argument that a certain chunk of the __tdx_hypercall() space is just for
>>> VMWare and you also add a VMWare-specific check and then export *that*,
>>> it might be acceptable.
>>>
>>> But I don't want random modules able to make random, unrestricted TDX
>>> hypercalls. That's asking for trouble.
>>
>> Considering exporting of __tdx_hypercall for random modules is not an
>> option, what VMware specific checks you are suggesting?
>
> Make sure it can only be called running on VMWare guests. A check for
> X86_HYPER_VMWARE seems simple enough.
>
> Second, unless the space is *HUGE*, you want to be exporting things like
> __vmware_platform() or vmware_legacy_x2apic_available(), *NOT* the
> underlying hypercall functions.
>
> We want to make sure that the interfaces are well defined and bounded.
Thanks Dave and Tim for your suggestions. I followed Dave recommendation
to have a simple check for X86_HYPER_VMWARE.
Please review patch 6, which I'll send shortly.
Thanks,
--Alexey
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
From: Alexey Makhalov <[email protected]>
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 10 +++++
2 files changed, 82 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 17091eba68cb..cd58ff8ef1af 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,6 +40,54 @@
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ struct tdx_module_args args = {
+ .r10 = VMWARE_TDX_VENDOR_LEAF,
+ .r11 = VMWARE_TDX_HCALL_FUNC,
+ .r12 = VMWARE_HYPERVISOR_MAGIC,
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ vmware_tdx_hypercall_args(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return args.r12;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +115,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, NULL, NULL,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +137,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +160,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +183,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, NULL,
+ out2, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +209,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0, 0, NULL, out2,
+ out3, out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +234,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, out1,
+ out2, out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..29a31d4eaa27 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,16 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/* Export tdx hypercall and allow it only for VMware guests. */
+void vmware_tdx_hypercall_args(struct tdx_module_args *args)
+{
+ if (hypervisor_is_type(X86_HYPER_VMWARE))
+ __tdx_hypercall(args);
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
On 12/5/23 23:15, Alexey Makhalov wrote:
> +#ifdef CONFIG_INTEL_TDX_GUEST
> +/* Export tdx hypercall and allow it only for VMware guests. */
> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
> +{
> + if (hypervisor_is_type(X86_HYPER_VMWARE))
> + __tdx_hypercall(args);
> +}
> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
> +#endif
I think this is still too generic. This still allows anything setting
X86_HYPER_VMWARE to make any TDX hypercall.
I'd *much* rather you export something like vmware_tdx_hypercall() or
even the high-level calls like hypervisor_ppn_reset_all(). The higher
level and more specialized the interface, the less likely it is to be
abused.
On 12/7/23 9:12 AM, Dave Hansen wrote:
> On 12/5/23 23:15, Alexey Makhalov wrote:
>> +#ifdef CONFIG_INTEL_TDX_GUEST
>> +/* Export tdx hypercall and allow it only for VMware guests. */
>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
>> +{
>> + if (hypervisor_is_type(X86_HYPER_VMWARE))
>> + __tdx_hypercall(args);
>> +}
>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
>> +#endif
>
> I think this is still too generic. This still allows anything setting
> X86_HYPER_VMWARE to make any TDX hypercall.
>
> I'd *much* rather you export something like vmware_tdx_hypercall() or
> even the high-level calls like hypervisor_ppn_reset_all(). The higher
> level and more specialized the interface, the less likely it is to be
> abused.
Dave, I understood your point. Please take a look on the next version of
the patch.
I export vmware_tdx_hypercall(), while vmware_tdx_hypercall_args() is a
static inline wrapper on top.
Most of the vmware hypercall logic plus sanity checks are now in
exported function. While only input and output argument handling remains
in the wrapper to allow compiler optimization for hypercalls with few
argument. Exporting vmware_tdx_hypercall1, vmware_tdx_hypercall3, and so
on is not an option either.
Regards,
--Alexey
From: Alexey Makhalov <[email protected]>
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 83 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 22 ++++++++++
2 files changed, 105 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 719e41260ece..04c698b905ab 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -34,12 +34,65 @@
#define VMWARE_CMD_GETHZ 45
#define VMWARE_CMD_GETVCPU_INFO 68
#define VMWARE_CMD_STEALCLOCK 91
+/*
+ * Hypercall command mask:
+ * bits[6:0] command, range [0, 127]
+ * bits[19:16] sub-command, range [0, 15]
+ */
+#define VMWARE_CMD_MASK 0xf007fULL
#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1af7e4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern unsigned long vmware_tdx_hypercall(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall_args(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ unsigned long ret;
+
+ struct tdx_module_args args = {
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ ret = vmware_tdx_hypercall(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return ret;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +120,11 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0, 0,
+ NULL, NULL, NULL,
+ NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +143,11 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0, 0,
+ out1, out2, NULL,
+ NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +167,11 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, 0, 0, 0, 0,
+ out1, out2, out3,
+ NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +191,11 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5, 0,
+ NULL, out2, NULL,
+ NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +218,11 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, in3, 0, 0, 0,
+ NULL, out2, out3,
+ out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +244,11 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall_args(cmd, in1, in3, in4, in5, 0,
+ out1, out2, out3,
+ NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..bcf1d0fb3e89 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,28 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+unsigned long vmware_tdx_hypercall(struct tdx_module_args *args)
+{
+ if (!hypervisor_is_type(X86_HYPER_VMWARE))
+ return 0;
+
+ if (args->r13 & ~VMWARE_CMD_MASK) {
+ pr_warn("Out of range command %llx\n", args->r13);
+ return 0;
+ }
+
+ args->r10 = VMWARE_TDX_VENDOR_LEAF;
+ args->r11 = VMWARE_TDX_HCALL_FUNC;
+ args->r12 = VMWARE_HYPERVISOR_MAGIC;
+
+ __tdx_hypercall(args);
+
+ return args->r12;
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0